Network Diagnostic Report

./NetworkManager-diff.txt

./cloud-diff.txt

diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/cloud.cfg /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/cloud.cfg
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/cloud.cfg	2024-09-17 15:08:48.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/cloud.cfg	2025-08-19 17:10:01.000000000 +0000
@@ -33,7 +33,6 @@
 
 # The modules that run in the 'init' stage
 cloud_init_modules:
- - migrator
  - seed_random
  - bootcmd
  - write-files
@@ -77,8 +76,6 @@
  - mcollective
  - salt-minion
  - reset_rmc
- - refresh_rmc_and_interface
- - rightscale_userdata
  - scripts-vendor
  - scripts-per-once
  - scripts-per-boot
@@ -101,7 +98,7 @@
      name: debian
      lock_passwd: True
      gecos: Debian
-     groups: [adm, audio, cdrom, dialout, dip, floppy, netdev, plugdev, sudo, video]
+     groups: [adm, audio, cdrom, dialout, dip, floppy, plugdev, sudo, video]
      sudo: ["ALL=(ALL) NOPASSWD:ALL"]
      shell: /bin/bash
    # Other config here will be given to the distro class and/or path classes
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/cloud.cfg.d/05_logging.cfg /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/cloud.cfg.d/05_logging.cfg
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/cloud.cfg.d/05_logging.cfg	2022-11-23 21:17:16.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/cloud.cfg.d/05_logging.cfg	2025-06-24 20:50:00.000000000 +0000
@@ -1,7 +1,7 @@
-## This yaml formated config file handles setting
+## This yaml formatted config file handles setting
 ## logger information.  The values that are necessary to be set
 ## are seen at the bottom.  The top '_log' are only used to remove
-## redundency in a syslog and fallback-to-file case.
+## redundancy in a syslog and fallback-to-file case.
 ##
 ## The 'log_cfgs' entry defines a list of logger configs
 ## Each entry in the list is tried, and the first one that
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/chrony.conf.almalinux.tmpl /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/chrony.conf.almalinux.tmpl
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/chrony.conf.almalinux.tmpl	1970-01-01 00:00:00.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/chrony.conf.almalinux.tmpl	2025-06-24 20:50:00.000000000 +0000
@@ -0,0 +1,51 @@
+## template:jinja
+# Use public servers from the pool.ntp.org project.
+# Please consider joining the pool (http://www.pool.ntp.org/join.html).
+{% if pools %}# pools
+{% endif %}
+{% for pool in pools -%}
+pool {{pool}} iburst
+{% endfor %}
+{%- if servers %}# servers
+{% endif %}
+{% for server in servers -%}
+server {{server}} iburst
+{% endfor %}
+{% for peer in peers -%}
+peer {{peer}}
+{% endfor %}
+{% for a in allow -%}
+allow {{a}}
+{% endfor %}
+
+# Record the rate at which the system clock gains/losses time.
+driftfile /var/lib/chrony/drift
+
+# Allow the system clock to be stepped in the first three updates
+# if its offset is larger than 1 second.
+makestep 1.0 3
+
+# Enable kernel synchronization of the real-time clock (RTC).
+rtcsync
+
+# Enable hardware timestamping on all interfaces that support it.
+#hwtimestamp *
+
+# Increase the minimum number of selectable sources required to adjust
+# the system clock.
+#minsources 2
+
+# Allow NTP client access from local network.
+#allow 192.168.0.0/16
+
+# Serve time even if not synchronized to a time source.
+#local stratum 10
+
+# Specify file containing keys for NTP authentication.
+#keyfile /etc/chrony.keys
+
+# Specify directory for log files.
+logdir /var/log/chrony
+
+# Select which information is logged.
+#log measurements statistics tracking
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/chrony.conf.alpine.tmpl /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/chrony.conf.alpine.tmpl
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/chrony.conf.alpine.tmpl	2022-11-23 21:17:16.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/chrony.conf.alpine.tmpl	2025-06-24 20:50:00.000000000 +0000
@@ -11,6 +11,12 @@
 {% for server in servers -%}
 server {{server}} iburst
 {% endfor %}
+{% for peer in peers -%}
+peer {{peer}}
+{% endfor %}
+{% for a in allow -%}
+allow {{a}}
+{% endfor %}
 
 # This directive specifies the location of the file containing ID/key pairs for
 # NTP authentication.
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/chrony.conf.centos.tmpl /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/chrony.conf.centos.tmpl
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/chrony.conf.centos.tmpl	2022-11-23 21:17:16.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/chrony.conf.centos.tmpl	2025-06-24 20:50:00.000000000 +0000
@@ -11,6 +11,12 @@
 {% for server in servers -%}
 server {{server}} iburst
 {% endfor %}
+{% for peer in peers -%}
+peer {{peer}}
+{% endfor %}
+{% for a in allow -%}
+allow {{a}}
+{% endfor %}
 
 # Record the rate at which the system clock gains/losses time.
 driftfile /var/lib/chrony/drift
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/chrony.conf.cloudlinux.tmpl /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/chrony.conf.cloudlinux.tmpl
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/chrony.conf.cloudlinux.tmpl	1970-01-01 00:00:00.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/chrony.conf.cloudlinux.tmpl	2025-06-24 20:50:00.000000000 +0000
@@ -0,0 +1,51 @@
+## template:jinja
+# Use public servers from the pool.ntp.org project.
+# Please consider joining the pool (http://www.pool.ntp.org/join.html).
+{% if pools %}# pools
+{% endif %}
+{% for pool in pools -%}
+pool {{pool}} iburst
+{% endfor %}
+{%- if servers %}# servers
+{% endif %}
+{% for server in servers -%}
+server {{server}} iburst
+{% endfor %}
+{% for peer in peers -%}
+peer {{peer}}
+{% endfor %}
+{% for a in allow -%}
+allow {{a}}
+{% endfor %}
+
+# Record the rate at which the system clock gains/losses time.
+driftfile /var/lib/chrony/drift
+
+# Allow the system clock to be stepped in the first three updates
+# if its offset is larger than 1 second.
+makestep 1.0 3
+
+# Enable kernel synchronization of the real-time clock (RTC).
+rtcsync
+
+# Enable hardware timestamping on all interfaces that support it.
+#hwtimestamp *
+
+# Increase the minimum number of selectable sources required to adjust
+# the system clock.
+#minsources 2
+
+# Allow NTP client access from local network.
+#allow 192.168.0.0/16
+
+# Serve time even if not synchronized to a time source.
+#local stratum 10
+
+# Specify file containing keys for NTP authentication.
+#keyfile /etc/chrony.keys
+
+# Specify directory for log files.
+logdir /var/log/chrony
+
+# Select which information is logged.
+#log measurements statistics tracking
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/chrony.conf.cos.tmpl /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/chrony.conf.cos.tmpl
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/chrony.conf.cos.tmpl	2022-11-23 21:17:16.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/chrony.conf.cos.tmpl	2025-06-24 20:50:00.000000000 +0000
@@ -1,6 +1,6 @@
 ## template:jinja
 # Welcome to the chrony configuration file. See chrony.conf(5) for more
-# information about usuable directives.
+# information about usable directives.
 
 {% if pools %}# pools
 {% endif %}
@@ -12,6 +12,12 @@
 {% for server in servers -%}
 server {{server}} iburst
 {% endfor %}
+{% for peer in peers -%}
+peer {{peer}}
+{% endfor %}
+{% for a in allow -%}
+allow {{a}}
+{% endfor %}
 
 # This directive specify the file into which chronyd will store the rate
 # information.
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/chrony.conf.debian.tmpl /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/chrony.conf.debian.tmpl
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/chrony.conf.debian.tmpl	2022-11-23 21:17:16.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/chrony.conf.debian.tmpl	2025-06-24 20:50:00.000000000 +0000
@@ -1,6 +1,6 @@
 ## template:jinja
 # Welcome to the chrony configuration file. See chrony.conf(5) for more
-# information about usuable directives.
+# information about usable directives.
 {% if pools %}# pools
 {% endif %}
 {% for pool in pools -%}
@@ -11,6 +11,12 @@
 {% for server in servers -%}
 server {{server}} iburst
 {% endfor %}
+{% for peer in peers -%}
+peer {{peer}}
+{% endfor %}
+{% for a in allow -%}
+allow {{a}}
+{% endfor %}
 
 # This directive specify the location of the file containing ID/key pairs for
 # NTP authentication.
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/chrony.conf.fedora.tmpl /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/chrony.conf.fedora.tmpl
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/chrony.conf.fedora.tmpl	2022-11-23 21:17:16.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/chrony.conf.fedora.tmpl	2025-06-24 20:50:00.000000000 +0000
@@ -11,6 +11,12 @@
 {% for server in servers -%}
 server {{server}} iburst
 {% endfor %}
+{% for peer in peers -%}
+peer {{peer}}
+{% endfor %}
+{% for a in allow -%}
+allow {{a}}
+{% endfor %}
 
 # Record the rate at which the system clock gains/losses time.
 driftfile /var/lib/chrony/drift
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/chrony.conf.freebsd.tmpl /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/chrony.conf.freebsd.tmpl
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/chrony.conf.freebsd.tmpl	2022-11-23 21:17:16.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/chrony.conf.freebsd.tmpl	2025-06-24 20:50:00.000000000 +0000
@@ -42,6 +42,12 @@
 pool {{pool}} iburst
 {% endfor %}
 
+{% for peer in peers -%}
+peer {{peer}}
+{% endfor %}
+{% for a in allow -%}
+allow {{a}}
+{% endfor %}
 #######################################################################
 ### AVOIDING POTENTIALLY BOGUS CHANGES TO YOUR CLOCK
 #
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/chrony.conf.opensuse-leap.tmpl /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/chrony.conf.opensuse-leap.tmpl
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/chrony.conf.opensuse-leap.tmpl	1970-01-01 00:00:00.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/chrony.conf.opensuse-leap.tmpl	2025-06-24 20:50:00.000000000 +0000
@@ -0,0 +1,44 @@
+## template:jinja
+# Use public servers from the pool.ntp.org project.
+# Please consider joining the pool (http://www.pool.ntp.org/join.html).
+{% if pools %}# pools
+{% endif %}
+{% for pool in pools -%}
+pool {{pool}} iburst
+{% endfor %}
+{%- if servers %}# servers
+{% endif %}
+{% for server in servers -%}
+server {{server}} iburst
+{% endfor %}
+{% for peer in peers -%}
+peer {{peer}}
+{% endfor %}
+{% for a in allow -%}
+allow {{a}}
+{% endfor %}
+
+# Record the rate at which the system clock gains/losses time.
+driftfile /var/lib/chrony/drift
+
+# In first three updates step the system clock instead of slew
+# if the adjustment is larger than 1 second.
+makestep 1.0 3
+
+# Enable kernel synchronization of the real-time clock (RTC).
+rtcsync
+
+# Allow NTP client access from local network.
+#allow 192.168/16
+
+# Serve time even if not synchronized to any NTP server.
+#local stratum 10
+
+# Specify file containing keys for NTP authentication.
+#keyfile /etc/chrony.keys
+
+# Specify directory for log files.
+logdir /var/log/chrony
+
+# Select which information is logged.
+#log measurements statistics tracking
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/chrony.conf.opensuse-microos.tmpl /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/chrony.conf.opensuse-microos.tmpl
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/chrony.conf.opensuse-microos.tmpl	1970-01-01 00:00:00.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/chrony.conf.opensuse-microos.tmpl	2025-06-24 20:50:00.000000000 +0000
@@ -0,0 +1,44 @@
+## template:jinja
+# Use public servers from the pool.ntp.org project.
+# Please consider joining the pool (http://www.pool.ntp.org/join.html).
+{% if pools %}# pools
+{% endif %}
+{% for pool in pools -%}
+pool {{pool}} iburst
+{% endfor %}
+{%- if servers %}# servers
+{% endif %}
+{% for server in servers -%}
+server {{server}} iburst
+{% endfor %}
+{% for peer in peers -%}
+peer {{peer}}
+{% endfor %}
+{% for a in allow -%}
+allow {{a}}
+{% endfor %}
+
+# Record the rate at which the system clock gains/losses time.
+driftfile /var/lib/chrony/drift
+
+# In first three updates step the system clock instead of slew
+# if the adjustment is larger than 1 second.
+makestep 1.0 3
+
+# Enable kernel synchronization of the real-time clock (RTC).
+rtcsync
+
+# Allow NTP client access from local network.
+#allow 192.168/16
+
+# Serve time even if not synchronized to any NTP server.
+#local stratum 10
+
+# Specify file containing keys for NTP authentication.
+#keyfile /etc/chrony.keys
+
+# Specify directory for log files.
+logdir /var/log/chrony
+
+# Select which information is logged.
+#log measurements statistics tracking
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/chrony.conf.opensuse.tmpl /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/chrony.conf.opensuse.tmpl
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/chrony.conf.opensuse.tmpl	2022-11-23 21:17:16.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/chrony.conf.opensuse.tmpl	2025-06-24 20:50:00.000000000 +0000
@@ -11,6 +11,12 @@
 {% for server in servers -%}
 server {{server}} iburst
 {% endfor %}
+{% for peer in peers -%}
+peer {{peer}}
+{% endfor %}
+{% for a in allow -%}
+allow {{a}}
+{% endfor %}
 
 # Record the rate at which the system clock gains/losses time.
 driftfile /var/lib/chrony/drift
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/chrony.conf.opensuse-tumbleweed.tmpl /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/chrony.conf.opensuse-tumbleweed.tmpl
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/chrony.conf.opensuse-tumbleweed.tmpl	1970-01-01 00:00:00.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/chrony.conf.opensuse-tumbleweed.tmpl	2025-06-24 20:50:00.000000000 +0000
@@ -0,0 +1,44 @@
+## template:jinja
+# Use public servers from the pool.ntp.org project.
+# Please consider joining the pool (http://www.pool.ntp.org/join.html).
+{% if pools %}# pools
+{% endif %}
+{% for pool in pools -%}
+pool {{pool}} iburst
+{% endfor %}
+{%- if servers %}# servers
+{% endif %}
+{% for server in servers -%}
+server {{server}} iburst
+{% endfor %}
+{% for peer in peers -%}
+peer {{peer}}
+{% endfor %}
+{% for a in allow -%}
+allow {{a}}
+{% endfor %}
+
+# Record the rate at which the system clock gains/losses time.
+driftfile /var/lib/chrony/drift
+
+# In first three updates step the system clock instead of slew
+# if the adjustment is larger than 1 second.
+makestep 1.0 3
+
+# Enable kernel synchronization of the real-time clock (RTC).
+rtcsync
+
+# Allow NTP client access from local network.
+#allow 192.168/16
+
+# Serve time even if not synchronized to any NTP server.
+#local stratum 10
+
+# Specify file containing keys for NTP authentication.
+#keyfile /etc/chrony.keys
+
+# Specify directory for log files.
+logdir /var/log/chrony
+
+# Select which information is logged.
+#log measurements statistics tracking
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/chrony.conf.photon.tmpl /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/chrony.conf.photon.tmpl
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/chrony.conf.photon.tmpl	2022-11-23 21:17:16.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/chrony.conf.photon.tmpl	2025-06-24 20:50:00.000000000 +0000
@@ -11,6 +11,12 @@
 {% for server in servers -%}
 server {{server}} iburst
 {% endfor %}
+{% for peer in peers -%}
+peer {{peer}}
+{% endfor %}
+{% for a in allow -%}
+allow {{a}}
+{% endfor %}
 
 # Record the rate at which the system clock gains/losses time.
 driftfile /var/lib/chrony/drift
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/chrony.conf.rhel.tmpl /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/chrony.conf.rhel.tmpl
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/chrony.conf.rhel.tmpl	2022-11-23 21:17:16.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/chrony.conf.rhel.tmpl	2025-06-24 20:50:00.000000000 +0000
@@ -11,6 +11,12 @@
 {% for server in servers -%}
 server {{server}} iburst
 {% endfor %}
+{% for peer in peers -%}
+peer {{peer}}
+{% endfor %}
+{% for a in allow -%}
+allow {{a}}
+{% endfor %}
 
 # Record the rate at which the system clock gains/losses time.
 driftfile /var/lib/chrony/drift
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/chrony.conf.rocky.tmpl /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/chrony.conf.rocky.tmpl
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/chrony.conf.rocky.tmpl	1970-01-01 00:00:00.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/chrony.conf.rocky.tmpl	2025-06-24 20:50:00.000000000 +0000
@@ -0,0 +1,51 @@
+## template:jinja
+# Use public servers from the pool.ntp.org project.
+# Please consider joining the pool (http://www.pool.ntp.org/join.html).
+{% if pools %}# pools
+{% endif %}
+{% for pool in pools -%}
+pool {{pool}} iburst
+{% endfor %}
+{%- if servers %}# servers
+{% endif %}
+{% for server in servers -%}
+server {{server}} iburst
+{% endfor %}
+{% for peer in peers -%}
+peer {{peer}}
+{% endfor %}
+{% for a in allow -%}
+allow {{a}}
+{% endfor %}
+
+# Record the rate at which the system clock gains/losses time.
+driftfile /var/lib/chrony/drift
+
+# Allow the system clock to be stepped in the first three updates
+# if its offset is larger than 1 second.
+makestep 1.0 3
+
+# Enable kernel synchronization of the real-time clock (RTC).
+rtcsync
+
+# Enable hardware timestamping on all interfaces that support it.
+#hwtimestamp *
+
+# Increase the minimum number of selectable sources required to adjust
+# the system clock.
+#minsources 2
+
+# Allow NTP client access from local network.
+#allow 192.168.0.0/16
+
+# Serve time even if not synchronized to a time source.
+#local stratum 10
+
+# Specify file containing keys for NTP authentication.
+#keyfile /etc/chrony.keys
+
+# Specify directory for log files.
+logdir /var/log/chrony
+
+# Select which information is logged.
+#log measurements statistics tracking
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/chrony.conf.sle_hpc.tmpl /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/chrony.conf.sle_hpc.tmpl
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/chrony.conf.sle_hpc.tmpl	1970-01-01 00:00:00.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/chrony.conf.sle_hpc.tmpl	2025-06-24 20:50:00.000000000 +0000
@@ -0,0 +1,44 @@
+## template:jinja
+# Use public servers from the pool.ntp.org project.
+# Please consider joining the pool (http://www.pool.ntp.org/join.html).
+{% if pools %}# pools
+{% endif %}
+{% for pool in pools -%}
+pool {{pool}} iburst
+{% endfor %}
+{%- if servers %}# servers
+{% endif %}
+{% for server in servers -%}
+server {{server}} iburst
+{% endfor %}
+{% for peer in peers -%}
+peer {{peer}}
+{% endfor %}
+{% for a in allow -%}
+allow {{a}}
+{% endfor %}
+
+# Record the rate at which the system clock gains/losses time.
+driftfile /var/lib/chrony/drift
+
+# In first three updates step the system clock instead of slew
+# if the adjustment is larger than 1 second.
+makestep 1.0 3
+
+# Enable kernel synchronization of the real-time clock (RTC).
+rtcsync
+
+# Allow NTP client access from local network.
+#allow 192.168/16
+
+# Serve time even if not synchronized to any NTP server.
+#local stratum 10
+
+# Specify file containing keys for NTP authentication.
+#keyfile /etc/chrony.keys
+
+# Specify directory for log files.
+logdir /var/log/chrony
+
+# Select which information is logged.
+#log measurements statistics tracking
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/chrony.conf.sle-micro.tmpl /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/chrony.conf.sle-micro.tmpl
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/chrony.conf.sle-micro.tmpl	1970-01-01 00:00:00.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/chrony.conf.sle-micro.tmpl	2025-06-24 20:50:00.000000000 +0000
@@ -0,0 +1,44 @@
+## template:jinja
+# Use public servers from the pool.ntp.org project.
+# Please consider joining the pool (http://www.pool.ntp.org/join.html).
+{% if pools %}# pools
+{% endif %}
+{% for pool in pools -%}
+pool {{pool}} iburst
+{% endfor %}
+{%- if servers %}# servers
+{% endif %}
+{% for server in servers -%}
+server {{server}} iburst
+{% endfor %}
+{% for peer in peers -%}
+peer {{peer}}
+{% endfor %}
+{% for a in allow -%}
+allow {{a}}
+{% endfor %}
+
+# Record the rate at which the system clock gains/losses time.
+driftfile /var/lib/chrony/drift
+
+# In first three updates step the system clock instead of slew
+# if the adjustment is larger than 1 second.
+makestep 1.0 3
+
+# Enable kernel synchronization of the real-time clock (RTC).
+rtcsync
+
+# Allow NTP client access from local network.
+#allow 192.168/16
+
+# Serve time even if not synchronized to any NTP server.
+#local stratum 10
+
+# Specify file containing keys for NTP authentication.
+#keyfile /etc/chrony.keys
+
+# Specify directory for log files.
+logdir /var/log/chrony
+
+# Select which information is logged.
+#log measurements statistics tracking
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/chrony.conf.sles.tmpl /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/chrony.conf.sles.tmpl
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/chrony.conf.sles.tmpl	2022-11-23 21:17:16.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/chrony.conf.sles.tmpl	2025-06-24 20:50:00.000000000 +0000
@@ -11,6 +11,12 @@
 {% for server in servers -%}
 server {{server}} iburst
 {% endfor %}
+{% for peer in peers -%}
+peer {{peer}}
+{% endfor %}
+{% for a in allow -%}
+allow {{a}}
+{% endfor %}
 
 # Record the rate at which the system clock gains/losses time.
 driftfile /var/lib/chrony/drift
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/chrony.conf.ubuntu.tmpl /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/chrony.conf.ubuntu.tmpl
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/chrony.conf.ubuntu.tmpl	2022-11-23 21:17:16.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/chrony.conf.ubuntu.tmpl	2025-06-24 20:50:00.000000000 +0000
@@ -1,6 +1,6 @@
 ## template:jinja
 # Welcome to the chrony configuration file. See chrony.conf(5) for more
-# information about usuable directives.
+# information about usable directives.
 
 # Use servers from the NTP Pool Project. Approved by Ubuntu Technical Board
 # on 2011-02-08 (LP: #104525). See http://www.pool.ntp.org/join.html for
@@ -15,6 +15,12 @@
 {% for server in servers -%}
 server {{server}} iburst
 {% endfor %}
+{% for peer in peers -%}
+peer {{peer}}
+{% endfor %}
+{% for a in allow -%}
+allow {{a}}
+{% endfor %}
 
 # This directive specify the location of the file containing ID/key pairs for
 # NTP authentication.
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/hosts.alpine.tmpl /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/hosts.alpine.tmpl
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/hosts.alpine.tmpl	2022-11-23 21:17:16.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/hosts.alpine.tmpl	2025-06-24 20:50:00.000000000 +0000
@@ -13,13 +13,12 @@
 #     /etc/cloud/cloud.cfg or cloud-config from user-data
 #
 # The following lines are desirable for IPv4 capable hosts
-127.0.1.1 {{hostname}} {{fqdn}}
-127.0.0.1 localhost localhost.localdomain
-127.0.0.1 localhost4 localhost4.localdomain4
+127.0.0.1 localhost.localdomain localhost
+127.0.0.1 localhost4.localdomain4 localhost4
+127.0.1.1 {{fqdn}} {{hostname}}
 
 # The following lines are desirable for IPv6 capable hosts
-::1 {{hostname}} {{fqdn}}
-::1 localhost6 localhost6.localdomain6
+::1 localhost6.localdomain6 localhost6
 
 ff02::1 ip6-allnodes
 ff02::2 ip6-allrouters
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/hosts.aosc.tmpl /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/hosts.aosc.tmpl
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/hosts.aosc.tmpl	1970-01-01 00:00:00.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/hosts.aosc.tmpl	2025-06-24 20:50:00.000000000 +0000
@@ -0,0 +1,23 @@
+## template:jinja
+{#
+This file (/etc/cloud/templates/hosts.aosc.tmpl) is only utilized
+if enabled in cloud-config.  Specifically, in order to enable it
+you need to add the following to config:
+   manage_etc_hosts: True
+-#}
+# Your system has configured 'manage_etc_hosts' as True.
+# As a result, if you wish for changes to this file to persist
+# then you will need to either
+# a.) make changes to the master file in /etc/cloud/templates/hosts.aosc.tmpl
+# b.) change or remove the value of 'manage_etc_hosts' in
+#     /etc/cloud/cloud.cfg or cloud-config from user-data
+#
+#<ip-address>   <hostname.domain.org>   <hostname>
+{# The value '{{hostname}}' will be replaced with the local-hostname -#}
+127.0.0.1       {{fqdn}} {{hostname}}
+127.0.0.1       localhost
+
+# The following lines are desirable for IPv6 capable hosts
+::1             localhost ip6-localhost ip6-loopback
+ff02::1         ip6-allnodes
+ff02::2         ip6-allrouters
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/hosts.azurelinux.tmpl /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/hosts.azurelinux.tmpl
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/hosts.azurelinux.tmpl	1970-01-01 00:00:00.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/hosts.azurelinux.tmpl	2025-06-24 20:50:00.000000000 +0000
@@ -0,0 +1,22 @@
+## template:jinja
+{#
+This file /etc/cloud/templates/hosts.azurelinux.tmpl is only utilized
+if enabled in cloud-config.  Specifically, in order to enable it
+you need to add the following to config:
+  manage_etc_hosts: True
+-#}
+# Your system has configured 'manage_etc_hosts' as True.
+# As a result, if you wish for changes to this file to persist
+# then you will need to either
+# a.) make changes to the master file in /etc/cloud/templates/hosts.azurelinux.tmpl
+# b.) change or remove the value of 'manage_etc_hosts' in
+#     /etc/cloud/cloud.cfg or cloud-config from user-data
+#
+# The following lines are desirable for IPv4 capable hosts
+127.0.0.1 {{fqdn}} {{hostname}}
+127.0.0.1 localhost.localdomain localhost
+127.0.0.1 localhost4.localdomain4 localhost4
+
+# The following lines are desirable for IPv6 capable hosts
+::1 {{fqdn}} {{hostname}}
+::1 localhost6.localdomain6 localhost6
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/hosts.mariner.tmpl /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/hosts.mariner.tmpl
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/hosts.mariner.tmpl	1970-01-01 00:00:00.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/hosts.mariner.tmpl	2025-06-24 20:50:00.000000000 +0000
@@ -0,0 +1,22 @@
+## template:jinja
+{#
+This file /etc/cloud/templates/hosts.mariner.tmpl is only utilized
+if enabled in cloud-config.  Specifically, in order to enable it
+you need to add the following to config:
+  manage_etc_hosts: True
+-#}
+# Your system has configured 'manage_etc_hosts' as True.
+# As a result, if you wish for changes to this file to persist
+# then you will need to either
+# a.) make changes to the master file in /etc/cloud/templates/hosts.mariner.tmpl
+# b.) change or remove the value of 'manage_etc_hosts' in
+#     /etc/cloud/cloud.cfg or cloud-config from user-data
+#
+# The following lines are desirable for IPv4 capable hosts
+127.0.0.1 {{fqdn}} {{hostname}}
+127.0.0.1 localhost.localdomain localhost
+127.0.0.1 localhost4.localdomain4 localhost4
+
+# The following lines are desirable for IPv6 capable hosts
+::1 {{fqdn}} {{hostname}}
+::1 localhost6.localdomain6 localhost6
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/ntp.conf.almalinux.tmpl /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/ntp.conf.almalinux.tmpl
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/ntp.conf.almalinux.tmpl	1970-01-01 00:00:00.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/ntp.conf.almalinux.tmpl	2025-06-24 20:50:00.000000000 +0000
@@ -0,0 +1,64 @@
+## template:jinja
+
+# For more information about this file, see the man pages
+# ntp.conf(5), ntp_acc(5), ntp_auth(5), ntp_clock(5), ntp_misc(5), ntp_mon(5).
+
+driftfile /var/lib/ntp/drift
+
+# Permit time synchronization with our time source, but do not
+# permit the source to query or modify the service on this system.
+restrict default kod nomodify notrap nopeer noquery
+restrict -6 default kod nomodify notrap nopeer noquery
+
+# Permit all access over the loopback interface.  This could
+# be tightened as well, but to do so would effect some of
+# the administrative functions.
+restrict 127.0.0.1
+restrict -6 ::1
+
+# Hosts on local network are less restricted.
+#restrict 192.168.1.0 mask 255.255.255.0 nomodify notrap
+
+# Use public servers from the pool.ntp.org project.
+# Please consider joining the pool (http://www.pool.ntp.org/join.html).
+{% if pools %}# pools
+{% endif %}
+{% for pool in pools -%}
+pool {{pool}} iburst
+{% endfor %}
+{%- if servers %}# servers
+{% endif %}
+{% for server in servers -%}
+server {{server}} iburst
+{% endfor %}
+{% for peer in peers -%}
+peer {{peer}}
+{% endfor %}
+
+#broadcast 192.168.1.255 autokey	# broadcast server
+#broadcastclient			# broadcast client
+#broadcast 224.0.1.1 autokey		# multicast server
+#multicastclient 224.0.1.1		# multicast client
+#manycastserver 239.255.254.254		# manycast server
+#manycastclient 239.255.254.254 autokey # manycast client
+
+# Enable public key cryptography.
+#crypto
+
+includefile /etc/ntp/crypto/pw
+
+# Key file containing the keys and key identifiers used when operating
+# with symmetric key cryptography.
+keys /etc/ntp/keys
+
+# Specify the key identifiers which are trusted.
+#trustedkey 4 8 42
+
+# Specify the key identifier to use with the ntpdc utility.
+#requestkey 8
+
+# Specify the key identifier to use with the ntpq utility.
+#controlkey 8
+
+# Enable writing of statistics records.
+#statistics clockstats cryptostats loopstats peerstats
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/ntp.conf.alpine.tmpl /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/ntp.conf.alpine.tmpl
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/ntp.conf.alpine.tmpl	2022-11-23 21:17:16.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/ntp.conf.alpine.tmpl	2025-06-24 20:50:00.000000000 +0000
@@ -8,3 +8,6 @@
 {% for server in servers -%}
 server {{server}}
 {% endfor %}
+{% for peer in peers -%}
+peer {{peer}}
+{% endfor %}
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/ntp.conf.cloudlinux.tmpl /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/ntp.conf.cloudlinux.tmpl
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/ntp.conf.cloudlinux.tmpl	1970-01-01 00:00:00.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/ntp.conf.cloudlinux.tmpl	2025-06-24 20:50:00.000000000 +0000
@@ -0,0 +1,64 @@
+## template:jinja
+
+# For more information about this file, see the man pages
+# ntp.conf(5), ntp_acc(5), ntp_auth(5), ntp_clock(5), ntp_misc(5), ntp_mon(5).
+
+driftfile /var/lib/ntp/drift
+
+# Permit time synchronization with our time source, but do not
+# permit the source to query or modify the service on this system.
+restrict default kod nomodify notrap nopeer noquery
+restrict -6 default kod nomodify notrap nopeer noquery
+
+# Permit all access over the loopback interface.  This could
+# be tightened as well, but to do so would effect some of
+# the administrative functions.
+restrict 127.0.0.1
+restrict -6 ::1
+
+# Hosts on local network are less restricted.
+#restrict 192.168.1.0 mask 255.255.255.0 nomodify notrap
+
+# Use public servers from the pool.ntp.org project.
+# Please consider joining the pool (http://www.pool.ntp.org/join.html).
+{% if pools %}# pools
+{% endif %}
+{% for pool in pools -%}
+pool {{pool}} iburst
+{% endfor %}
+{%- if servers %}# servers
+{% endif %}
+{% for server in servers -%}
+server {{server}} iburst
+{% endfor %}
+{% for peer in peers -%}
+peer {{peer}}
+{% endfor %}
+
+#broadcast 192.168.1.255 autokey	# broadcast server
+#broadcastclient			# broadcast client
+#broadcast 224.0.1.1 autokey		# multicast server
+#multicastclient 224.0.1.1		# multicast client
+#manycastserver 239.255.254.254		# manycast server
+#manycastclient 239.255.254.254 autokey # manycast client
+
+# Enable public key cryptography.
+#crypto
+
+includefile /etc/ntp/crypto/pw
+
+# Key file containing the keys and key identifiers used when operating
+# with symmetric key cryptography.
+keys /etc/ntp/keys
+
+# Specify the key identifiers which are trusted.
+#trustedkey 4 8 42
+
+# Specify the key identifier to use with the ntpdc utility.
+#requestkey 8
+
+# Specify the key identifier to use with the ntpq utility.
+#controlkey 8
+
+# Enable writing of statistics records.
+#statistics clockstats cryptostats loopstats peerstats
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/ntp.conf.debian.tmpl /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/ntp.conf.debian.tmpl
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/ntp.conf.debian.tmpl	2022-11-23 21:17:16.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/ntp.conf.debian.tmpl	2025-06-24 20:50:00.000000000 +0000
@@ -29,6 +29,9 @@
 {% for server in servers -%}
 server {{server}} iburst
 {% endfor %}
+{% for peer in peers -%}
+peer {{peer}}
+{% endfor %}
 
 # Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
 # details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/ntp.conf.fedora.tmpl /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/ntp.conf.fedora.tmpl
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/ntp.conf.fedora.tmpl	2022-11-23 21:17:16.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/ntp.conf.fedora.tmpl	2025-06-24 20:50:00.000000000 +0000
@@ -30,6 +30,9 @@
 {% for server in servers -%}
 server {{server}} iburst
 {% endfor %}
+{% for peer in peers -%}
+peer {{peer}}
+{% endfor %}
 
 #broadcast 192.168.1.255 autokey	# broadcast server
 #broadcastclient			# broadcast client
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/ntp.conf.freebsd.tmpl /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/ntp.conf.freebsd.tmpl
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/ntp.conf.freebsd.tmpl	2022-11-23 21:17:16.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/ntp.conf.freebsd.tmpl	2025-06-24 20:50:00.000000000 +0000
@@ -22,12 +22,13 @@
 tos minclock 3 maxclock 6
 
 #
-# The following pool statement will give you a random set of NTP servers
-# geographically close to you.  A single pool statement adds multiple
-# servers from the pool, according to the tos minclock/maxclock targets.
+# The following pool statements will give you a random set of IPv4 and IPv6
+# NTP servers geographically close to you.  A single pool statement adds
+# multiple servers from the pool, according to the tos minclock/maxclock
+# targets.
 # See http://www.pool.ntp.org/ for details.  Note, pool.ntp.org encourages
 # users with a static IP and good upstream NTP servers to add a server
-# to the pool. See http://www.pool.ntp.org/join.html if you are interested.
+# to the pool.  See http://www.pool.ntp.org/join.html if you are interested.
 #
 # The option `iburst' is used for faster initial synchronization.
 #
@@ -36,6 +37,9 @@
 {% for pool in pools -%}
 pool {{pool}} iburst
 {% endfor %}
+{% for peer in peers -%}
+peer {{peer}}
+{% endfor %}
 
 #
 # To configure a specific server, such as an organization-wide local
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/ntp.conf.opensuse.tmpl /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/ntp.conf.opensuse.tmpl
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/ntp.conf.opensuse.tmpl	2022-11-23 21:17:16.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/ntp.conf.opensuse.tmpl	2025-06-24 20:50:00.000000000 +0000
@@ -42,6 +42,9 @@
 {% for server in servers -%}
 server {{server}} iburst
 {% endfor %}
+{% for peer in peers -%}
+peer {{peer}}
+{% endfor %}
 
 # Access control configuration; see /usr/share/doc/packages/ntp/html/accopt.html for
 # details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/ntp.conf.photon.tmpl /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/ntp.conf.photon.tmpl
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/ntp.conf.photon.tmpl	2022-11-23 21:17:16.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/ntp.conf.photon.tmpl	2025-06-24 20:50:00.000000000 +0000
@@ -31,6 +31,9 @@
 {% for server in servers -%}
 server {{server}} iburst
 {% endfor %}
+{% for peer in peers -%}
+peer {{peer}}
+{% endfor %}
 
 #broadcast 192.168.1.255 autokey	# broadcast server
 #broadcastclient			# broadcast client
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/ntp.conf.rhel.tmpl /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/ntp.conf.rhel.tmpl
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/ntp.conf.rhel.tmpl	2022-11-23 21:17:16.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/ntp.conf.rhel.tmpl	2025-06-24 20:50:00.000000000 +0000
@@ -31,6 +31,9 @@
 {% for server in servers -%}
 server {{server}} iburst
 {% endfor %}
+{% for peer in peers -%}
+peer {{peer}}
+{% endfor %}
 
 #broadcast 192.168.1.255 autokey	# broadcast server
 #broadcastclient			# broadcast client
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/ntp.conf.rocky.tmpl /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/ntp.conf.rocky.tmpl
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/ntp.conf.rocky.tmpl	1970-01-01 00:00:00.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/ntp.conf.rocky.tmpl	2025-06-24 20:50:00.000000000 +0000
@@ -0,0 +1,64 @@
+## template:jinja
+
+# For more information about this file, see the man pages
+# ntp.conf(5), ntp_acc(5), ntp_auth(5), ntp_clock(5), ntp_misc(5), ntp_mon(5).
+
+driftfile /var/lib/ntp/drift
+
+# Permit time synchronization with our time source, but do not
+# permit the source to query or modify the service on this system.
+restrict default kod nomodify notrap nopeer noquery
+restrict -6 default kod nomodify notrap nopeer noquery
+
+# Permit all access over the loopback interface.  This could
+# be tightened as well, but to do so would effect some of
+# the administrative functions.
+restrict 127.0.0.1
+restrict -6 ::1
+
+# Hosts on local network are less restricted.
+#restrict 192.168.1.0 mask 255.255.255.0 nomodify notrap
+
+# Use public servers from the pool.ntp.org project.
+# Please consider joining the pool (http://www.pool.ntp.org/join.html).
+{% if pools %}# pools
+{% endif %}
+{% for pool in pools -%}
+pool {{pool}} iburst
+{% endfor %}
+{%- if servers %}# servers
+{% endif %}
+{% for server in servers -%}
+server {{server}} iburst
+{% endfor %}
+{% for peer in peers -%}
+peer {{peer}}
+{% endfor %}
+
+#broadcast 192.168.1.255 autokey	# broadcast server
+#broadcastclient			# broadcast client
+#broadcast 224.0.1.1 autokey		# multicast server
+#multicastclient 224.0.1.1		# multicast client
+#manycastserver 239.255.254.254		# manycast server
+#manycastclient 239.255.254.254 autokey # manycast client
+
+# Enable public key cryptography.
+#crypto
+
+includefile /etc/ntp/crypto/pw
+
+# Key file containing the keys and key identifiers used when operating
+# with symmetric key cryptography.
+keys /etc/ntp/keys
+
+# Specify the key identifiers which are trusted.
+#trustedkey 4 8 42
+
+# Specify the key identifier to use with the ntpdc utility.
+#requestkey 8
+
+# Specify the key identifier to use with the ntpq utility.
+#controlkey 8
+
+# Enable writing of statistics records.
+#statistics clockstats cryptostats loopstats peerstats
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/ntp.conf.sles.tmpl /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/ntp.conf.sles.tmpl
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/ntp.conf.sles.tmpl	2022-11-23 21:17:16.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/ntp.conf.sles.tmpl	2025-06-24 20:50:00.000000000 +0000
@@ -42,6 +42,9 @@
 {% for server in servers -%}
 server {{server}} iburst
 {% endfor %}
+{% for peer in peers -%}
+peer {{peer}}
+{% endfor %}
 
 # Access control configuration; see /usr/share/doc/packages/ntp/html/accopt.html for
 # details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/ntp.conf.ubuntu.tmpl /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/ntp.conf.ubuntu.tmpl
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/ntp.conf.ubuntu.tmpl	2022-11-23 21:17:16.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/ntp.conf.ubuntu.tmpl	2025-06-24 20:50:00.000000000 +0000
@@ -27,6 +27,9 @@
 {% for server in servers -%}
 server {{server}} iburst
 {% endfor %}
+{% for peer in peers -%}
+peer {{peer}}
+{% endfor %}
 
 # Use Ubuntu's ntp server as a fallback.
 # pool ntp.ubuntu.com
@@ -64,7 +67,7 @@
 #disable auth
 #broadcastclient
 
-#Changes recquired to use pps synchonisation as explained in documentation:
+#Changes required to use pps synchronisation as explained in documentation:
 #http://www.ntp.org/ntpfaq/NTP-s-config-adv.htm#AEN3918
 
 #server 127.127.8.1 mode 135 prefer    # Meinberg GPS167 with PPS
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/ntpd.conf.openbsd.tmpl /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/ntpd.conf.openbsd.tmpl
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/ntpd.conf.openbsd.tmpl	2022-11-23 21:17:16.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/ntpd.conf.openbsd.tmpl	2025-06-24 20:50:00.000000000 +0000
@@ -12,6 +12,9 @@
 {% for server in servers -%}# servers
 server {{server}}
 {% endfor %}
+{% for peer in peers -%}
+peer {{peer}}
+{% endfor %}
 sensor *
 
 constraint from "9.9.9.9"              # quad9 v4 without DNS
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/sources.list.debian.deb822.tmpl /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/sources.list.debian.deb822.tmpl
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/sources.list.debian.deb822.tmpl	1970-01-01 00:00:00.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/sources.list.debian.deb822.tmpl	2025-11-10 16:15:37.000000000 +0000
@@ -0,0 +1,34 @@
+## template:jinja
+## Note, this file is written by cloud-init on first boot of an instance
+## modifications made here will not survive a re-bundle.
+## if you wish to make changes you can:
+## a.) add 'apt_preserve_sources_list: true' to /etc/cloud/cloud.cfg
+##     or do the same in user-data
+## b.) add supplemental sources in /etc/apt/sources.list.d
+## c.) make changes to template file
+##      /etc/cloud/templates/sources.list.debian.deb822.tmpl
+
+# For how to upgrade to newer versions of the distribution, see:
+# http://www.debian.org/releases/stable/i386/release-notes/ch-upgrading.html
+
+## See the sources.list(5) manual page for further settings.
+
+## Comment any of the following Suites to avoid getting updates from the
+## specific Suite.
+##
+## N.B. software from {{codename}}-backports repository may not have been
+## tested as extensively as that contained in the main release, although it
+## includes newer versions of some applications which may provide useful
+## features.
+Types: deb deb-src
+URIs: {{mirror}}
+Suites: {{codename}} {{codename}}-updates {{codename}}-backports
+Components: main
+Signed-By: {{primary_key | default('/usr/share/keyrings/debian-archive-keyring.gpg', true)}}
+
+## Major bug fix updates produced after the final release of the distribution.
+Types: deb deb-src
+URIs: {{security}}
+Suites: {{codename}}{% if codename in ('buster', 'stretch') %}/updates{% else %}-security{% endif +%}
+Components: main
+Signed-By: {{security_key | default(primary_key, true) | default('/usr/share/keyrings/debian-archive-keyring.gpg', true)}}
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/sources.list.ubuntu.deb822.tmpl /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/sources.list.ubuntu.deb822.tmpl
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/cloud/templates/sources.list.ubuntu.deb822.tmpl	1970-01-01 00:00:00.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/cloud/templates/sources.list.ubuntu.deb822.tmpl	2025-06-24 20:50:00.000000000 +0000
@@ -0,0 +1,56 @@
+## template:jinja
+## Note, this file is written by cloud-init on first boot of an instance
+## modifications made here will not survive a re-bundle.
+##
+## If you wish to make changes you can:
+## a.) add 'apt_preserve_sources_list: true' to /etc/cloud/cloud.cfg
+##     or do the same in user-data
+## b.) add supplemental sources in /etc/apt/sources.list.d
+## c.) make changes to template file
+##      /etc/cloud/templates/sources.list.ubuntu.deb822.tmpl
+##
+
+# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
+# newer versions of the distribution.
+
+## Ubuntu distribution repository
+##
+## The following settings can be adjusted to configure which packages to use from Ubuntu.
+## Mirror your choices (except for URIs and Suites) in the security section below to
+## ensure timely security updates.
+##
+## Types: Append deb-src to enable the fetching of source package.
+## URIs: A URL to the repository (you may add multiple URLs)
+## Suites: The following additional suites can be configured
+##   <name>-updates   - Major bug fix updates produced after the final release of the
+##                      distribution.
+##   <name>-backports - software from this repository may not have been tested as
+##                      extensively as that contained in the main release, although it includes
+##                      newer versions of some applications which may provide useful features.
+##                      Also, please note that software in backports WILL NOT receive any review
+##                      or updates from the Ubuntu security team.
+## Components: Aside from main, the following components can be added to the list
+##   restricted  - Software that may not be under a free license, or protected by patents.
+##   universe    - Community maintained packages. Software in this repository receives maintenance
+##                 from volunteers in the Ubuntu community, or a 10 year security maintenance
+##                 commitment from Canonical when an Ubuntu Pro subscription is attached.
+##   multiverse  - Community maintained of restricted. Software from this repository is
+##                 ENTIRELY UNSUPPORTED by the Ubuntu team, and may not be under a free
+##                 licence. Please satisfy yourself as to your rights to use the software.
+##                 Also, please note that software in multiverse WILL NOT receive any
+##                 review or updates from the Ubuntu security team.
+##
+## See the sources.list(5) manual page for further settings.
+Types: deb
+URIs: {{mirror}}
+Suites: {{codename}} {{codename}}-updates {{codename}}-backports
+Components: main universe restricted multiverse
+Signed-By: {{primary_key | default('/usr/share/keyrings/ubuntu-archive-keyring.gpg', true)}}
+
+## Ubuntu security updates. Aside from URIs and Suites,
+## this should mirror your choices in the previous section.
+Types: deb
+URIs: {{security}}
+Suites: {{codename}}-security
+Components: main universe restricted multiverse
+Signed-By: {{security_key | default(primary_key, true) | default('/usr/share/keyrings/ubuntu-archive-keyring.gpg', true)}}

./file-list.txt

systemd-network-diff.txt	0 bytes
new-debian13/system-info.txt	2192 bytes
new-debian13/var/log/cloud-init.log	330986 bytes
new-debian13/var/log/cloud-init-output.log	62023 bytes
new-debian13/var/lib/dpkg/status	1172686 bytes
new-debian13/etc/hostname	16 bytes
new-debian13/etc/modprobe.d/dkms.conf	127 bytes
new-debian13/etc/modprobe.d/blacklist.conf	34 bytes
new-debian13/etc/debian_version	5 bytes
new-debian13/etc/systemd/system/sshd-keygen@.service.d/disable-sshd-keygen-if-cloud-init-active.conf	410 bytes
new-debian13/etc/systemd/system/syncthing.service	270 bytes
new-debian13/etc/network/if-up.d/ethtool	1689 bytes
new-debian13/etc/network/if-pre-up.d/ethtool	348 bytes
new-debian13/etc/modules	212 bytes
new-debian13/etc/fstab	177 bytes
new-debian13/etc/resolv.conf	134 bytes
new-debian13/etc/dhcp/debug	1426 bytes
new-debian13/etc/dhcp/dhclient-exit-hooks.d/resolved	5600 bytes
new-debian13/etc/dhcp/dhclient-exit-hooks.d/timesyncd	1396 bytes
new-debian13/etc/dhcp/dhclient-exit-hooks.d/rfc3442-classless-routes	1756 bytes
new-debian13/etc/dhcp/dhclient-exit-hooks.d/hook-dhclient	805 bytes
new-debian13/etc/dhcp/dhclient-enter-hooks.d/resolved-enter	421 bytes
new-debian13/etc/dhcp/dhclient.conf	1735 bytes
new-debian13/etc/NetworkManager/dispatcher.d/cloud-init-hook-network-manager	719 bytes
new-debian13/etc/default/grub	494 bytes
new-debian13/etc/default/grub.d/15_timeout.cfg	15 bytes
new-debian13/etc/default/grub.d/10_cloud.cfg	99 bytes
new-debian13/etc/modules-load.d/zfs.conf	4 bytes
new-debian13/etc/netplan/50-cloud-init.yaml	157 bytes
new-debian13/etc/apt/sources.list.d/debian.sources	383 bytes
new-debian13/etc/initramfs-tools/initramfs.conf	1583 bytes
new-debian13/etc/initramfs-tools/update-initramfs.conf	378 bytes
new-debian13/etc/initramfs-tools/modules	250 bytes
new-debian13/etc/cloud/cloud.cfg	2724 bytes
new-debian13/etc/cloud/cloud.cfg.d/README	167 bytes
new-debian13/etc/cloud/cloud.cfg.d/01_debian_cloud.cfg	309 bytes
new-debian13/etc/cloud/cloud.cfg.d/05_logging.cfg	2071 bytes
new-debian13/etc/cloud/cloud.cfg.d/99-ssh.cfg	48 bytes
new-debian13/etc/cloud/templates/hosts.redhat.tmpl	912 bytes
new-debian13/etc/cloud/templates/chrony.conf.sles.tmpl	1090 bytes
new-debian13/etc/cloud/templates/ntp.conf.sles.tmpl	2807 bytes
new-debian13/etc/cloud/templates/ntp.conf.fedora.tmpl	2126 bytes
new-debian13/etc/cloud/templates/sources.list.debian.tmpl	1439 bytes
new-debian13/etc/cloud/templates/sources.list.ubuntu.deb822.tmpl	3091 bytes
new-debian13/etc/cloud/templates/chrony.conf.sle-micro.tmpl	1090 bytes
new-debian13/etc/cloud/templates/chrony.conf.alpine.tmpl	1212 bytes
new-debian13/etc/cloud/templates/ntp.conf.almalinux.tmpl	1902 bytes
new-debian13/etc/cloud/templates/chrony.conf.debian.tmpl	1209 bytes
new-debian13/etc/cloud/templates/chrony.conf.freebsd.tmpl	14315 bytes
new-debian13/etc/cloud/templates/hosts.alpine.tmpl	893 bytes
new-debian13/etc/cloud/templates/ntp.conf.debian.tmpl	2202 bytes
new-debian13/etc/cloud/templates/timesyncd.conf.tmpl	203 bytes
new-debian13/etc/cloud/templates/chrony.conf.cloudlinux.tmpl	1280 bytes
new-debian13/etc/cloud/templates/hosts.aosc.tmpl	931 bytes
new-debian13/etc/cloud/templates/ntp.conf.photon.tmpl	1902 bytes
new-debian13/etc/cloud/templates/hosts.suse.tmpl	1067 bytes
new-debian13/etc/cloud/templates/chrony.conf.centos.tmpl	1280 bytes
new-debian13/etc/cloud/templates/hosts.gentoo.tmpl	910 bytes
new-debian13/etc/cloud/templates/chrony.conf.cos.tmpl	873 bytes
new-debian13/etc/cloud/templates/chrony.conf.rhel.tmpl	1280 bytes
new-debian13/etc/cloud/templates/chrony.conf.sle_hpc.tmpl	1090 bytes
new-debian13/etc/cloud/templates/ntpd.conf.openbsd.tmpl	543 bytes
new-debian13/etc/cloud/templates/chrony.conf.opensuse-tumbleweed.tmpl	1090 bytes
new-debian13/etc/cloud/templates/ntp.conf.opensuse.tmpl	2807 bytes
new-debian13/etc/cloud/templates/chrony.conf.almalinux.tmpl	1280 bytes
new-debian13/etc/cloud/templates/ntp.conf.alpine.tmpl	255 bytes
new-debian13/etc/cloud/templates/hosts.debian.tmpl	845 bytes
new-debian13/etc/cloud/templates/chrony.conf.opensuse.tmpl	1090 bytes
new-debian13/etc/cloud/templates/resolv.conf.tmpl	921 bytes
new-debian13/etc/cloud/templates/ntp.conf.rhel.tmpl	1904 bytes
new-debian13/etc/cloud/templates/ntp.conf.cloudlinux.tmpl	1902 bytes
new-debian13/etc/cloud/templates/chef_client.rb.tmpl	1667 bytes
new-debian13/etc/cloud/templates/hosts.photon.tmpl	874 bytes
new-debian13/etc/cloud/templates/chrony.conf.ubuntu.tmpl	1378 bytes
new-debian13/etc/cloud/templates/host.mariner.tmpl	898 bytes
new-debian13/etc/cloud/templates/hosts.arch.tmpl	841 bytes
new-debian13/etc/cloud/templates/chrony.conf.opensuse-microos.tmpl	1090 bytes
new-debian13/etc/cloud/templates/systemd.resolved.conf.tmpl	504 bytes
new-debian13/etc/cloud/templates/sources.list.ubuntu.tmpl	2504 bytes
new-debian13/etc/cloud/templates/ntp.conf.freebsd.tmpl	4229 bytes
new-debian13/etc/cloud/templates/chrony.conf.photon.tmpl	1368 bytes
new-debian13/etc/cloud/templates/ntp.conf.ubuntu.tmpl	2561 bytes
new-debian13/etc/cloud/templates/chrony.conf.fedora.tmpl	1368 bytes
new-debian13/etc/cloud/templates/hosts.mariner.tmpl	876 bytes
new-debian13/etc/cloud/templates/chrony.conf.opensuse-leap.tmpl	1090 bytes
new-debian13/etc/cloud/templates/hosts.freebsd.tmpl	911 bytes
new-debian13/etc/cloud/templates/hosts.azurelinux.tmpl	882 bytes
new-debian13/etc/cloud/templates/sources.list.debian.deb822.tmpl	1557 bytes
new-debian13/etc/cloud/templates/chrony.conf.rocky.tmpl	1280 bytes
new-debian13/etc/cloud/templates/ntp.conf.rocky.tmpl	1902 bytes
new-debian13/etc/cloud/clean.d/README	883 bytes
new-debian13/etc/hosts	565 bytes
new-debian13/boot/grub/x86_64-efi/appleldr.mod	4984 bytes
new-debian13/boot/grub/x86_64-efi/ntfscomp.mod	5688 bytes
new-debian13/boot/grub/x86_64-efi/tr.mod	3624 bytes
new-debian13/boot/grub/x86_64-efi/macbless.mod	4840 bytes
new-debian13/boot/grub/x86_64-efi/usbserial_ftdi.mod	3304 bytes
new-debian13/boot/grub/x86_64-efi/gcry_sha1.mod	8136 bytes
new-debian13/boot/grub/x86_64-efi/uhci.mod	9984 bytes
new-debian13/boot/grub/x86_64-efi/scsi.mod	7072 bytes
new-debian13/boot/grub/x86_64-efi/jfs.mod	9544 bytes
new-debian13/boot/grub/x86_64-efi/fat.mod	8712 bytes
new-debian13/boot/grub/x86_64-efi/nativedisk.mod	6624 bytes
new-debian13/boot/grub/x86_64-efi/gcry_arcfour.mod	2312 bytes
new-debian13/boot/grub/x86_64-efi/syslinuxcfg.mod	29720 bytes
new-debian13/boot/grub/x86_64-efi/cbtable.mod	1528 bytes
new-debian13/boot/grub/x86_64-efi/ehci.mod	25648 bytes
new-debian13/boot/grub/x86_64-efi/png.mod	11032 bytes
new-debian13/boot/grub/x86_64-efi/xnu.mod	42176 bytes
new-debian13/boot/grub/x86_64-efi/ldm.mod	8216 bytes
new-debian13/boot/grub/x86_64-efi/spkmodem.mod	2976 bytes
new-debian13/boot/grub/x86_64-efi/cpuid.mod	2456 bytes
new-debian13/boot/grub/x86_64-efi/part_msdos.mod	2928 bytes
new-debian13/boot/grub/x86_64-efi/video_bochs.mod	8264 bytes
new-debian13/boot/grub/x86_64-efi/configfile.mod	3168 bytes
new-debian13/boot/grub/x86_64-efi/odc.mod	4568 bytes
new-debian13/boot/grub/x86_64-efi/ufs2.mod	7968 bytes
new-debian13/boot/grub/x86_64-efi/affs.mod	8216 bytes
new-debian13/boot/grub/x86_64-efi/video.lst	41 bytes
new-debian13/boot/grub/x86_64-efi/smbios.mod	8168 bytes
new-debian13/boot/grub/x86_64-efi/cpio_be.mod	4576 bytes
new-debian13/boot/grub/x86_64-efi/gcry_tiger.mod	13728 bytes
new-debian13/boot/grub/x86_64-efi/cbfs.mod	5864 bytes
new-debian13/boot/grub/x86_64-efi/normal.mod	177344 bytes
new-debian13/boot/grub/x86_64-efi/bitmap.mod	3096 bytes
new-debian13/boot/grub/x86_64-efi/video.mod	8800 bytes
new-debian13/boot/grub/x86_64-efi/play.mod	3856 bytes
new-debian13/boot/grub/x86_64-efi/raid6rec.mod	3160 bytes
new-debian13/boot/grub/x86_64-efi/raid5rec.mod	1880 bytes
new-debian13/boot/grub/x86_64-efi/bitmap_scale.mod	5216 bytes
new-debian13/boot/grub/x86_64-efi/gcry_rijndael.mod	20416 bytes
new-debian13/boot/grub/x86_64-efi/cbmemc.mod	3768 bytes
new-debian13/boot/grub/x86_64-efi/gcry_dsa.mod	3320 bytes
new-debian13/boot/grub/x86_64-efi/sfs.mod	7912 bytes
new-debian13/boot/grub/x86_64-efi/reiserfs.mod	14040 bytes
new-debian13/boot/grub/x86_64-efi/efinet.mod	10968 bytes
new-debian13/boot/grub/x86_64-efi/fshelp.mod	4360 bytes
new-debian13/boot/grub/x86_64-efi/efitextmode.mod	3664 bytes
new-debian13/boot/grub/x86_64-efi/xnu_uuid_test.mod	3024 bytes
new-debian13/boot/grub/x86_64-efi/squash4.mod	10336 bytes
new-debian13/boot/grub/x86_64-efi/gcry_whirlpool.mod	22760 bytes
new-debian13/boot/grub/x86_64-efi/minix3_be.mod	6000 bytes
new-debian13/boot/grub/x86_64-efi/pbkdf2_test.mod	3328 bytes
new-debian13/boot/grub/x86_64-efi/net.mod	136624 bytes
new-debian13/boot/grub/x86_64-efi/morse.mod	3128 bytes
new-debian13/boot/grub/x86_64-efi/luks.mod	5944 bytes
new-debian13/boot/grub/x86_64-efi/hfspluscomp.mod	4208 bytes
new-debian13/boot/grub/x86_64-efi/password_pbkdf2.mod	4416 bytes
new-debian13/boot/grub/x86_64-efi/ext2.mod	8792 bytes
new-debian13/boot/grub/x86_64-efi/peimage.mod	9576 bytes
new-debian13/boot/grub/x86_64-efi/diskfilter.mod	13008 bytes
new-debian13/boot/grub/x86_64-efi/setjmp_test.mod	2520 bytes
new-debian13/boot/grub/x86_64-efi/parttool.lst	17 bytes
new-debian13/boot/grub/x86_64-efi/afs.mod	8656 bytes
new-debian13/boot/grub/x86_64-efi/acpi.mod	15728 bytes
new-debian13/boot/grub/x86_64-efi/mdraid1x.mod	2576 bytes
new-debian13/boot/grub/x86_64-efi/memdisk.mod	3224 bytes
new-debian13/boot/grub/x86_64-efi/f2fs.mod	10240 bytes
new-debian13/boot/grub/x86_64-efi/load.cfg	98 bytes
new-debian13/boot/grub/x86_64-efi/usbms.mod	10704 bytes
new-debian13/boot/grub/x86_64-efi/part_plan.mod	2400 bytes
new-debian13/boot/grub/x86_64-efi/fixvideo.mod	2784 bytes
new-debian13/boot/grub/x86_64-efi/extcmd.mod	7520 bytes
new-debian13/boot/grub/x86_64-efi/part_bsd.mod	4144 bytes
new-debian13/boot/grub/x86_64-efi/gcry_rsa.mod	3224 bytes
new-debian13/boot/grub/x86_64-efi/videoinfo.mod	5400 bytes
new-debian13/boot/grub/x86_64-efi/pcidump.mod	3416 bytes
new-debian13/boot/grub/x86_64-efi/priority_queue.mod	2192 bytes
new-debian13/boot/grub/x86_64-efi/eval.mod	2104 bytes
new-debian13/boot/grub/x86_64-efi/linux16.mod	8544 bytes
new-debian13/boot/grub/x86_64-efi/macho.mod	10704 bytes
new-debian13/boot/grub/x86_64-efi/gcry_crc.mod	11728 bytes
new-debian13/boot/grub/x86_64-efi/moddep.lst	5318 bytes
new-debian13/boot/grub/x86_64-efi/setjmp.mod	912 bytes
new-debian13/boot/grub/x86_64-efi/videotest_checksum.mod	3584 bytes
new-debian13/boot/grub/x86_64-efi/keystatus.mod	2856 bytes
new-debian13/boot/grub/x86_64-efi/plainmount.mod	11192 bytes
new-debian13/boot/grub/x86_64-efi/pbkdf2.mod	1896 bytes
new-debian13/boot/grub/x86_64-efi/file.mod	26576 bytes
new-debian13/boot/grub/x86_64-efi/bsd.mod	49992 bytes
new-debian13/boot/grub/x86_64-efi/luks2.mod	20896 bytes
new-debian13/boot/grub/x86_64-efi/gfxterm_background.mod	4320 bytes
new-debian13/boot/grub/x86_64-efi/lvm.mod	12408 bytes
new-debian13/boot/grub/x86_64-efi/xzio.mod	19648 bytes
new-debian13/boot/grub/x86_64-efi/partmap.lst	111 bytes
new-debian13/boot/grub/x86_64-efi/grub.efi	151552 bytes
new-debian13/boot/grub/x86_64-efi/gfxmenu.mod	59968 bytes
new-debian13/boot/grub/x86_64-efi/msdospart.mod	3592 bytes
new-debian13/boot/grub/x86_64-efi/rdmsr.mod	3000 bytes
new-debian13/boot/grub/x86_64-efi/test_blockarg.mod	1960 bytes
new-debian13/boot/grub/x86_64-efi/random.mod	3600 bytes
new-debian13/boot/grub/x86_64-efi/cs5536.mod	3840 bytes
new-debian13/boot/grub/x86_64-efi/gcry_md4.mod	4008 bytes
new-debian13/boot/grub/x86_64-efi/ohci.mod	15616 bytes
new-debian13/boot/grub/x86_64-efi/terminal.mod	6584 bytes
new-debian13/boot/grub/x86_64-efi/lspci.mod	7136 bytes
new-debian13/boot/grub/x86_64-efi/tar.mod	5144 bytes
new-debian13/boot/grub/x86_64-efi/terminfo.mod	19296 bytes
new-debian13/boot/grub/x86_64-efi/usbtest.mod	5544 bytes
new-debian13/boot/grub/x86_64-efi/trig.mod	1936 bytes
new-debian13/boot/grub/x86_64-efi/videotest.mod	5408 bytes
new-debian13/boot/grub/x86_64-efi/gcry_rmd160.mod	7760 bytes
new-debian13/boot/grub/x86_64-efi/backtrace.mod	2416 bytes
new-debian13/boot/grub/x86_64-efi/cryptodisk.mod	22840 bytes
new-debian13/boot/grub/x86_64-efi/functional_test.mod	46600 bytes
new-debian13/boot/grub/x86_64-efi/legacycfg.mod	45424 bytes
new-debian13/boot/grub/x86_64-efi/part_dvh.mod	2128 bytes
new-debian13/boot/grub/x86_64-efi/hfsplus.mod	11384 bytes
new-debian13/boot/grub/x86_64-efi/aout.mod	1376 bytes
new-debian13/boot/grub/x86_64-efi/at_keyboard.mod	6704 bytes
new-debian13/boot/grub/x86_64-efi/help.mod	3960 bytes
new-debian13/boot/grub/x86_64-efi/keylayouts.mod	6304 bytes
new-debian13/boot/grub/x86_64-efi/relocator.mod	26680 bytes
new-debian13/boot/grub/x86_64-efi/gcry_twofish.mod	33272 bytes
new-debian13/boot/grub/x86_64-efi/gptsync.mod	5288 bytes
new-debian13/boot/grub/x86_64-efi/usbserial_common.mod	2768 bytes
new-debian13/boot/grub/x86_64-efi/dm_nv.mod	2696 bytes
new-debian13/boot/grub/x86_64-efi/gcry_blowfish.mod	9024 bytes
new-debian13/boot/grub/x86_64-efi/loadenv.mod	9056 bytes
new-debian13/boot/grub/x86_64-efi/bfs.mod	9880 bytes
new-debian13/boot/grub/x86_64-efi/div_test.mod	8064 bytes
new-debian13/boot/grub/x86_64-efi/video_fb.mod	29744 bytes
new-debian13/boot/grub/x86_64-efi/mdraid09_be.mod	2688 bytes
new-debian13/boot/grub/x86_64-efi/loopback.mod	5224 bytes
new-debian13/boot/grub/x86_64-efi/command.lst	3707 bytes
new-debian13/boot/grub/x86_64-efi/search.mod	5448 bytes
new-debian13/boot/grub/x86_64-efi/lssal.mod	3624 bytes
new-debian13/boot/grub/x86_64-efi/gzio.mod	12800 bytes
new-debian13/boot/grub/x86_64-efi/parttool.mod	7448 bytes
new-debian13/boot/grub/x86_64-efi/font.mod	19616 bytes
new-debian13/boot/grub/x86_64-efi/usb_keyboard.mod	5688 bytes
new-debian13/boot/grub/x86_64-efi/cbtime.mod	4392 bytes
new-debian13/boot/grub/x86_64-efi/gcry_md5.mod	4464 bytes
new-debian13/boot/grub/x86_64-efi/part_acorn.mod	2200 bytes
new-debian13/boot/grub/x86_64-efi/iso9660.mod	13496 bytes
new-debian13/boot/grub/x86_64-efi/exfctest.mod	2056 bytes
new-debian13/boot/grub/x86_64-efi/ufs1_be.mod	8120 bytes
new-debian13/boot/grub/x86_64-efi/adler32.mod	1808 bytes
new-debian13/boot/grub/x86_64-efi/pata.mod	7392 bytes
new-debian13/boot/grub/x86_64-efi/serial.mod	17944 bytes
new-debian13/boot/grub/x86_64-efi/video_cirrus.mod	8856 bytes
new-debian13/boot/grub/x86_64-efi/afsplitter.mod	2112 bytes
new-debian13/boot/grub/x86_64-efi/part_apple.mod	2952 bytes
new-debian13/boot/grub/x86_64-efi/geli.mod	8712 bytes
new-debian13/boot/grub/x86_64-efi/multiboot2.mod	24952 bytes
new-debian13/boot/grub/x86_64-efi/cmp_test.mod	6656 bytes
new-debian13/boot/grub/x86_64-efi/bufio.mod	2880 bytes
new-debian13/boot/grub/x86_64-efi/echo.mod	2920 bytes
new-debian13/boot/grub/x86_64-efi/regexp.mod	79144 bytes
new-debian13/boot/grub/x86_64-efi/minix2_be.mod	5944 bytes
new-debian13/boot/grub/x86_64-efi/legacy_password_test.mod	15816 bytes
new-debian13/boot/grub/x86_64-efi/xnu_uuid.mod	3192 bytes
new-debian13/boot/grub/x86_64-efi/loadbios.mod	4480 bytes
new-debian13/boot/grub/x86_64-efi/zfscrypt.mod	8464 bytes
new-debian13/boot/grub/x86_64-efi/zfs.mod	58792 bytes
new-debian13/boot/grub/x86_64-efi/sleep_test.mod	3176 bytes
new-debian13/boot/grub/x86_64-efi/datetime.mod	2792 bytes
new-debian13/boot/grub/x86_64-efi/elf.mod	8856 bytes
new-debian13/boot/grub/x86_64-efi/iorw.mod	4240 bytes
new-debian13/boot/grub/x86_64-efi/linux.mod	28136 bytes
new-debian13/boot/grub/x86_64-efi/chain.mod	8424 bytes
new-debian13/boot/grub/x86_64-efi/password.mod	2864 bytes
new-debian13/boot/grub/x86_64-efi/hashsum.mod	8336 bytes
new-debian13/boot/grub/x86_64-efi/ntfs.mod	16224 bytes
new-debian13/boot/grub/x86_64-efi/lsmmap.mod	2824 bytes
new-debian13/boot/grub/x86_64-efi/minix2.mod	5848 bytes
new-debian13/boot/grub/x86_64-efi/progress.mod	3072 bytes
new-debian13/boot/grub/x86_64-efi/date.mod	3104 bytes
new-debian13/boot/grub/x86_64-efi/gcry_sha512.mod	6200 bytes
new-debian13/boot/grub/x86_64-efi/memrw.mod	4208 bytes
new-debian13/boot/grub/x86_64-efi/gfxterm_menu.mod	7616 bytes
new-debian13/boot/grub/x86_64-efi/bswap_test.mod	3152 bytes
new-debian13/boot/grub/x86_64-efi/ata.mod	8864 bytes
new-debian13/boot/grub/x86_64-efi/ls.mod	6392 bytes
new-debian13/boot/grub/x86_64-efi/gcry_camellia.mod	27712 bytes
new-debian13/boot/grub/x86_64-efi/tpm.mod	8136 bytes
new-debian13/boot/grub/x86_64-efi/tga.mod	6832 bytes
new-debian13/boot/grub/x86_64-efi/cat.mod	4320 bytes
new-debian13/boot/grub/x86_64-efi/boot.mod	3704 bytes
new-debian13/boot/grub/x86_64-efi/cmp.mod	3304 bytes
new-debian13/boot/grub/x86_64-efi/hello.mod	1768 bytes
new-debian13/boot/grub/x86_64-efi/pgp.mod	19232 bytes
new-debian13/boot/grub/x86_64-efi/lsefimmap.mod	3576 bytes
new-debian13/boot/grub/x86_64-efi/part_sunpc.mod	2408 bytes
new-debian13/boot/grub/x86_64-efi/usbserial_usbdebug.mod	2232 bytes
new-debian13/boot/grub/x86_64-efi/hexdump.mod	4600 bytes
new-debian13/boot/grub/x86_64-efi/core.efi	151552 bytes
new-debian13/boot/grub/x86_64-efi/zstd.mod	80928 bytes
new-debian13/boot/grub/x86_64-efi/gcry_sha256.mod	5416 bytes
new-debian13/boot/grub/x86_64-efi/test.mod	7896 bytes
new-debian13/boot/grub/x86_64-efi/gcry_idea.mod	3928 bytes
new-debian13/boot/grub/x86_64-efi/newc.mod	4728 bytes
new-debian13/boot/grub/x86_64-efi/part_amiga.mod	2568 bytes
new-debian13/boot/grub/x86_64-efi/part_sun.mod	2160 bytes
new-debian13/boot/grub/x86_64-efi/reboot.mod	1528 bytes
new-debian13/boot/grub/x86_64-efi/all_video.mod	704 bytes
new-debian13/boot/grub/x86_64-efi/gettext.mod	8456 bytes
new-debian13/boot/grub/x86_64-efi/mdraid09.mod	2680 bytes
new-debian13/boot/grub/x86_64-efi/lsefisystab.mod	4496 bytes
new-debian13/boot/grub/x86_64-efi/setpci.mod	8144 bytes
new-debian13/boot/grub/x86_64-efi/gcry_serpent.mod	16176 bytes
new-debian13/boot/grub/x86_64-efi/strtoull_test.mod	3176 bytes
new-debian13/boot/grub/x86_64-efi/disk.mod	3000 bytes
new-debian13/boot/grub/x86_64-efi/div.mod	1256 bytes
new-debian13/boot/grub/x86_64-efi/testload.mod	3792 bytes
new-debian13/boot/grub/x86_64-efi/usbserial_pl2303.mod	3672 bytes
new-debian13/boot/grub/x86_64-efi/bli.mod	3512 bytes
new-debian13/boot/grub/x86_64-efi/cmdline_cat_test.mod	4488 bytes
new-debian13/boot/grub/x86_64-efi/search_label.mod	4856 bytes
new-debian13/boot/grub/x86_64-efi/fs.lst	219 bytes
new-debian13/boot/grub/x86_64-efi/romfs.mod	5808 bytes
new-debian13/boot/grub/x86_64-efi/hdparm.mod	10456 bytes
new-debian13/boot/grub/x86_64-efi/gfxterm.mod	16856 bytes
new-debian13/boot/grub/x86_64-efi/crypto.lst	936 bytes
new-debian13/boot/grub/x86_64-efi/crc64.mod	2016 bytes
new-debian13/boot/grub/x86_64-efi/offsetio.mod	2160 bytes
new-debian13/boot/grub/x86_64-efi/lsefi.mod	5016 bytes
new-debian13/boot/grub/x86_64-efi/multiboot.mod	22008 bytes
new-debian13/boot/grub/x86_64-efi/terminal.lst	162 bytes
new-debian13/boot/grub/x86_64-efi/efi_uga.mod	6864 bytes
new-debian13/boot/grub/x86_64-efi/efi_gop.mod	12608 bytes
new-debian13/boot/grub/x86_64-efi/minix3.mod	5920 bytes
new-debian13/boot/grub/x86_64-efi/efifwsetup.mod	2584 bytes
new-debian13/boot/grub/x86_64-efi/ahci.mod	22056 bytes
new-debian13/boot/grub/x86_64-efi/ctz_test.mod	2544 bytes
new-debian13/boot/grub/x86_64-efi/true.mod	1800 bytes
new-debian13/boot/grub/x86_64-efi/minix.mod	5736 bytes
new-debian13/boot/grub/x86_64-efi/read.mod	2808 bytes
new-debian13/boot/grub/x86_64-efi/datehook.mod	2912 bytes
new-debian13/boot/grub/x86_64-efi/part_dfly.mod	2584 bytes
new-debian13/boot/grub/x86_64-efi/sleep.mod	3256 bytes
new-debian13/boot/grub/x86_64-efi/minix_be.mod	5824 bytes
new-debian13/boot/grub/x86_64-efi/wrmsr.mod	2336 bytes
new-debian13/boot/grub/x86_64-efi/part_gpt.mod	3184 bytes
new-debian13/boot/grub/x86_64-efi/btrfs.mod	28352 bytes
new-debian13/boot/grub/x86_64-efi/gcry_rfc2268.mod	2984 bytes
new-debian13/boot/grub/x86_64-efi/cbls.mod	5576 bytes
new-debian13/boot/grub/x86_64-efi/ufs1.mod	7952 bytes
new-debian13/boot/grub/x86_64-efi/probe.mod	5616 bytes
new-debian13/boot/grub/x86_64-efi/mmap.mod	9120 bytes
new-debian13/boot/grub/x86_64-efi/nilfs2.mod	10184 bytes
new-debian13/boot/grub/x86_64-efi/mpi.mod	44032 bytes
new-debian13/boot/grub/x86_64-efi/crypto.mod	6968 bytes
new-debian13/boot/grub/x86_64-efi/video_colors.mod	10048 bytes
new-debian13/boot/grub/x86_64-efi/halt.mod	7432 bytes
new-debian13/boot/grub/x86_64-efi/archelp.mod	4696 bytes
new-debian13/boot/grub/x86_64-efi/tftp.mod	8560 bytes
new-debian13/boot/grub/x86_64-efi/exfat.mod	8624 bytes
new-debian13/boot/grub/x86_64-efi/minicmd.mod	5920 bytes
new-debian13/boot/grub/x86_64-efi/jpeg.mod	11136 bytes
new-debian13/boot/grub/x86_64-efi/cpio.mod	4568 bytes
new-debian13/boot/grub/x86_64-efi/gcry_cast5.mod	14664 bytes
new-debian13/boot/grub/x86_64-efi/gcry_seed.mod	14992 bytes
new-debian13/boot/grub/x86_64-efi/modinfo.sh	2577 bytes
new-debian13/boot/grub/x86_64-efi/mul_test.mod	2360 bytes
new-debian13/boot/grub/x86_64-efi/usb.mod	15664 bytes
new-debian13/boot/grub/x86_64-efi/procfs.mod	3728 bytes
new-debian13/boot/grub/x86_64-efi/http.mod	9520 bytes
new-debian13/boot/grub/x86_64-efi/shift_test.mod	3064 bytes
new-debian13/boot/grub/x86_64-efi/lsacpi.mod	7096 bytes
new-debian13/boot/grub/x86_64-efi/hfs.mod	10192 bytes
new-debian13/boot/grub/x86_64-efi/search_fs_uuid.mod	4904 bytes
new-debian13/boot/grub/x86_64-efi/udf.mod	12832 bytes
new-debian13/boot/grub/x86_64-efi/time.mod	2288 bytes
new-debian13/boot/grub/x86_64-efi/testspeed.mod	3416 bytes
new-debian13/boot/grub/x86_64-efi/zfsinfo.mod	10416 bytes
new-debian13/boot/grub/x86_64-efi/search_fs_file.mod	4840 bytes
new-debian13/boot/grub/x86_64-efi/xfs.mod	11512 bytes
new-debian13/boot/grub/x86_64-efi/gcry_des.mod	16776 bytes
new-debian13/boot/grub/x86_64-efi/blocklist.mod	2952 bytes
new-debian13/boot/grub/x86_64-efi/json.mod	5744 bytes
new-debian13/boot/grub/x86_64-efi/signature_test.mod	8200 bytes
new-debian13/boot/grub/x86_64-efi/lzopio.mod	6744 bytes
new-debian13/boot/grub/locale/pl.mo	140053 bytes
new-debian13/boot/grub/locale/de.mo	141112 bytes
new-debian13/boot/grub/locale/en@piglatin.mo	147016 bytes
new-debian13/boot/grub/locale/hu.mo	127835 bytes
new-debian13/boot/grub/locale/ja.mo	43864 bytes
new-debian13/boot/grub/locale/ro.mo	148318 bytes
new-debian13/boot/grub/locale/de_CH.mo	141119 bytes
new-debian13/boot/grub/locale/eo.mo	42309 bytes
new-debian13/boot/grub/locale/en@arabic.mo	175960 bytes
new-debian13/boot/grub/locale/nb.mo	118998 bytes
new-debian13/boot/grub/locale/da.mo	111681 bytes
new-debian13/boot/grub/locale/gl.mo	96475 bytes
new-debian13/boot/grub/locale/fr.mo	147754 bytes
new-debian13/boot/grub/locale/he.mo	83723 bytes
new-debian13/boot/grub/locale/nl.mo	119172 bytes
new-debian13/boot/grub/locale/zh_TW.mo	29235 bytes
new-debian13/boot/grub/locale/en@cyrillic.mo	166040 bytes
new-debian13/boot/grub/locale/hr.mo	120913 bytes
new-debian13/boot/grub/locale/sl.mo	87794 bytes
new-debian13/boot/grub/locale/id.mo	27729 bytes
new-debian13/boot/grub/locale/ast.mo	119242 bytes
new-debian13/boot/grub/locale/es.mo	122218 bytes
new-debian13/boot/grub/locale/ca.mo	119925 bytes
new-debian13/boot/grub/locale/zh_CN.mo	130080 bytes
new-debian13/boot/grub/locale/tr.mo	77716 bytes
new-debian13/boot/grub/locale/de@hebrew.mo	212344 bytes
new-debian13/boot/grub/locale/lg.mo	7733 bytes
new-debian13/boot/grub/locale/ru.mo	158850 bytes
new-debian13/boot/grub/locale/en@greek.mo	166037 bytes
new-debian13/boot/grub/locale/en@hebrew.mo	190500 bytes
new-debian13/boot/grub/locale/pt_BR.mo	81011 bytes
new-debian13/boot/grub/locale/ko.mo	146377 bytes
new-debian13/boot/grub/locale/pt.mo	122438 bytes
new-debian13/boot/grub/locale/vi.mo	152271 bytes
new-debian13/boot/grub/locale/pa.mo	57713 bytes
new-debian13/boot/grub/locale/fi.mo	122963 bytes
new-debian13/boot/grub/locale/lt.mo	94844 bytes
new-debian13/boot/grub/locale/sv.mo	119048 bytes
new-debian13/boot/grub/locale/it.mo	116895 bytes
new-debian13/boot/grub/locale/en@quot.mo	129725 bytes
new-debian13/boot/grub/locale/sr.mo	178532 bytes
new-debian13/boot/grub/locale/uk.mo	187098 bytes
new-debian13/boot/grub/locale/ka.mo	150445 bytes
new-debian13/boot/grub/i386-pc/ntfscomp.mod	4308 bytes
new-debian13/boot/grub/i386-pc/tr.mod	2320 bytes
new-debian13/boot/grub/i386-pc/macbless.mod	3212 bytes
new-debian13/boot/grub/i386-pc/usbserial_ftdi.mod	2272 bytes
new-debian13/boot/grub/i386-pc/gcry_sha1.mod	8536 bytes
new-debian13/boot/grub/i386-pc/uhci.mod	6492 bytes
new-debian13/boot/grub/i386-pc/scsi.mod	4612 bytes
new-debian13/boot/grub/i386-pc/jfs.mod	6404 bytes
new-debian13/boot/grub/i386-pc/fat.mod	6132 bytes
new-debian13/boot/grub/i386-pc/nativedisk.mod	4148 bytes
new-debian13/boot/grub/i386-pc/gcry_arcfour.mod	1580 bytes
new-debian13/boot/grub/i386-pc/syslinuxcfg.mod	17344 bytes
new-debian13/boot/grub/i386-pc/cbtable.mod	1048 bytes
new-debian13/boot/grub/i386-pc/ehci.mod	16128 bytes
new-debian13/boot/grub/i386-pc/png.mod	7984 bytes
new-debian13/boot/grub/i386-pc/xnu.mod	27288 bytes
new-debian13/boot/grub/i386-pc/ldm.mod	6260 bytes
new-debian13/boot/grub/i386-pc/spkmodem.mod	2008 bytes
new-debian13/boot/grub/i386-pc/cpuid.mod	1652 bytes
new-debian13/boot/grub/i386-pc/part_msdos.mod	2284 bytes
new-debian13/boot/grub/i386-pc/video_bochs.mod	5548 bytes
new-debian13/boot/grub/i386-pc/configfile.mod	2204 bytes
new-debian13/boot/grub/i386-pc/odc.mod	2964 bytes
new-debian13/boot/grub/i386-pc/pxe.mod	3672 bytes
new-debian13/boot/grub/i386-pc/ufs2.mod	5348 bytes
new-debian13/boot/grub/i386-pc/affs.mod	5644 bytes
new-debian13/boot/grub/i386-pc/vga_text.mod	2128 bytes
new-debian13/boot/grub/i386-pc/video.lst	33 bytes
new-debian13/boot/grub/i386-pc/smbios.mod	5504 bytes
new-debian13/boot/grub/i386-pc/cpio_be.mod	2980 bytes
new-debian13/boot/grub/i386-pc/pxechain.mod	2608 bytes
new-debian13/boot/grub/i386-pc/gcry_tiger.mod	13472 bytes
new-debian13/boot/grub/i386-pc/cbfs.mod	3872 bytes
new-debian13/boot/grub/i386-pc/normal.mod	115092 bytes
new-debian13/boot/grub/i386-pc/bitmap.mod	2188 bytes
new-debian13/boot/grub/i386-pc/video.mod	5928 bytes
new-debian13/boot/grub/i386-pc/play.mod	2448 bytes
new-debian13/boot/grub/i386-pc/raid6rec.mod	2188 bytes
new-debian13/boot/grub/i386-pc/raid5rec.mod	1288 bytes
new-debian13/boot/grub/i386-pc/bitmap_scale.mod	3596 bytes
new-debian13/boot/grub/i386-pc/gcry_rijndael.mod	19300 bytes
new-debian13/boot/grub/i386-pc/cbmemc.mod	2440 bytes
new-debian13/boot/grub/i386-pc/gcry_dsa.mod	2180 bytes
new-debian13/boot/grub/i386-pc/sfs.mod	5100 bytes
new-debian13/boot/grub/i386-pc/reiserfs.mod	8664 bytes
new-debian13/boot/grub/i386-pc/fshelp.mod	2924 bytes
new-debian13/boot/grub/i386-pc/xnu_uuid_test.mod	1924 bytes
new-debian13/boot/grub/i386-pc/squash4.mod	7200 bytes
new-debian13/boot/grub/i386-pc/gcry_whirlpool.mod	24504 bytes
new-debian13/boot/grub/i386-pc/efiemu32.o	7644 bytes
new-debian13/boot/grub/i386-pc/lsapm.mod	2236 bytes
new-debian13/boot/grub/i386-pc/minix3_be.mod	3816 bytes
new-debian13/boot/grub/i386-pc/pbkdf2_test.mod	2088 bytes
new-debian13/boot/grub/i386-pc/net.mod	59412 bytes
new-debian13/boot/grub/i386-pc/morse.mod	2316 bytes
new-debian13/boot/grub/i386-pc/luks.mod	3924 bytes
new-debian13/boot/grub/i386-pc/hfspluscomp.mod	2972 bytes
new-debian13/boot/grub/i386-pc/password_pbkdf2.mod	2732 bytes
new-debian13/boot/grub/i386-pc/ext2.mod	6120 bytes
new-debian13/boot/grub/i386-pc/diskfilter.mod	9816 bytes
new-debian13/boot/grub/i386-pc/vbe.mod	9684 bytes
new-debian13/boot/grub/i386-pc/boot.img	512 bytes
new-debian13/boot/grub/i386-pc/setjmp_test.mod	1624 bytes
new-debian13/boot/grub/i386-pc/parttool.lst	17 bytes
new-debian13/boot/grub/i386-pc/afs.mod	6048 bytes
new-debian13/boot/grub/i386-pc/acpi.mod	10576 bytes
new-debian13/boot/grub/i386-pc/mdraid1x.mod	1880 bytes
new-debian13/boot/grub/i386-pc/memdisk.mod	2096 bytes
new-debian13/boot/grub/i386-pc/f2fs.mod	6628 bytes
new-debian13/boot/grub/i386-pc/mda_text.mod	2020 bytes
new-debian13/boot/grub/i386-pc/usbms.mod	6936 bytes
new-debian13/boot/grub/i386-pc/part_plan.mod	1732 bytes
new-debian13/boot/grub/i386-pc/sendkey.mod	6996 bytes
new-debian13/boot/grub/i386-pc/extcmd.mod	4620 bytes
new-debian13/boot/grub/i386-pc/part_bsd.mod	2680 bytes
new-debian13/boot/grub/i386-pc/gcry_rsa.mod	1960 bytes
new-debian13/boot/grub/i386-pc/videoinfo.mod	3976 bytes
new-debian13/boot/grub/i386-pc/pcidump.mod	2364 bytes
new-debian13/boot/grub/i386-pc/priority_queue.mod	1512 bytes
new-debian13/boot/grub/i386-pc/pci.mod	1316 bytes
new-debian13/boot/grub/i386-pc/eval.mod	1368 bytes
new-debian13/boot/grub/i386-pc/linux16.mod	5516 bytes
new-debian13/boot/grub/i386-pc/macho.mod	7376 bytes
new-debian13/boot/grub/i386-pc/gcry_crc.mod	10516 bytes
new-debian13/boot/grub/i386-pc/moddep.lst	5791 bytes
new-debian13/boot/grub/i386-pc/setjmp.mod	628 bytes
new-debian13/boot/grub/i386-pc/efiemu64.o	11048 bytes
new-debian13/boot/grub/i386-pc/videotest_checksum.mod	2280 bytes
new-debian13/boot/grub/i386-pc/keystatus.mod	1832 bytes
new-debian13/boot/grub/i386-pc/plainmount.mod	7260 bytes
new-debian13/boot/grub/i386-pc/pbkdf2.mod	1312 bytes
new-debian13/boot/grub/i386-pc/file.mod	17100 bytes
new-debian13/boot/grub/i386-pc/bsd.mod	31272 bytes
new-debian13/boot/grub/i386-pc/luks2.mod	14300 bytes
new-debian13/boot/grub/i386-pc/gfxterm_background.mod	2796 bytes
new-debian13/boot/grub/i386-pc/lvm.mod	8512 bytes
new-debian13/boot/grub/i386-pc/xzio.mod	14940 bytes
new-debian13/boot/grub/i386-pc/partmap.lst	111 bytes
new-debian13/boot/grub/i386-pc/gfxmenu.mod	39012 bytes
new-debian13/boot/grub/i386-pc/msdospart.mod	2392 bytes
new-debian13/boot/grub/i386-pc/rdmsr.mod	1832 bytes
new-debian13/boot/grub/i386-pc/test_blockarg.mod	1272 bytes
new-debian13/boot/grub/i386-pc/random.mod	3668 bytes
new-debian13/boot/grub/i386-pc/cs5536.mod	3584 bytes
new-debian13/boot/grub/i386-pc/gcry_md4.mod	3024 bytes
new-debian13/boot/grub/i386-pc/ohci.mod	10288 bytes
new-debian13/boot/grub/i386-pc/terminal.mod	4432 bytes
new-debian13/boot/grub/i386-pc/lspci.mod	4768 bytes
new-debian13/boot/grub/i386-pc/tar.mod	3504 bytes
new-debian13/boot/grub/i386-pc/terminfo.mod	12212 bytes
new-debian13/boot/grub/i386-pc/usbtest.mod	3560 bytes
new-debian13/boot/grub/i386-pc/trig.mod	1656 bytes
new-debian13/boot/grub/i386-pc/videotest.mod	4216 bytes
new-debian13/boot/grub/i386-pc/gcry_rmd160.mod	8200 bytes
new-debian13/boot/grub/i386-pc/backtrace.mod	1576 bytes
new-debian13/boot/grub/i386-pc/cryptodisk.mod	14720 bytes
new-debian13/boot/grub/i386-pc/functional_test.mod	34144 bytes
new-debian13/boot/grub/i386-pc/legacycfg.mod	30056 bytes
new-debian13/boot/grub/i386-pc/part_dvh.mod	1424 bytes
new-debian13/boot/grub/i386-pc/hfsplus.mod	8116 bytes
new-debian13/boot/grub/i386-pc/aout.mod	956 bytes
new-debian13/boot/grub/i386-pc/at_keyboard.mod	4116 bytes
new-debian13/boot/grub/i386-pc/help.mod	2584 bytes
new-debian13/boot/grub/i386-pc/keylayouts.mod	4968 bytes
new-debian13/boot/grub/i386-pc/relocator.mod	15036 bytes
new-debian13/boot/grub/i386-pc/gcry_twofish.mod	36800 bytes
new-debian13/boot/grub/i386-pc/gptsync.mod	3740 bytes
new-debian13/boot/grub/i386-pc/usbserial_common.mod	1924 bytes
new-debian13/boot/grub/i386-pc/dm_nv.mod	1768 bytes
new-debian13/boot/grub/i386-pc/gcry_blowfish.mod	7976 bytes
new-debian13/boot/grub/i386-pc/loadenv.mod	5744 bytes
new-debian13/boot/grub/i386-pc/efiemu.mod	23624 bytes
new-debian13/boot/grub/i386-pc/bfs.mod	6764 bytes
new-debian13/boot/grub/i386-pc/div_test.mod	5504 bytes
new-debian13/boot/grub/i386-pc/ntldr.mod	2504 bytes
new-debian13/boot/grub/i386-pc/video_fb.mod	21312 bytes
new-debian13/boot/grub/i386-pc/mdraid09_be.mod	1964 bytes
new-debian13/boot/grub/i386-pc/loopback.mod	3312 bytes
new-debian13/boot/grub/i386-pc/command.lst	3931 bytes
new-debian13/boot/grub/i386-pc/search.mod	3688 bytes
new-debian13/boot/grub/i386-pc/truecrypt.mod	3556 bytes
new-debian13/boot/grub/i386-pc/gzio.mod	8744 bytes
new-debian13/boot/grub/i386-pc/parttool.mod	4632 bytes
new-debian13/boot/grub/i386-pc/font.mod	13840 bytes
new-debian13/boot/grub/i386-pc/usb_keyboard.mod	3740 bytes
new-debian13/boot/grub/i386-pc/cbtime.mod	2752 bytes
new-debian13/boot/grub/i386-pc/gcry_md5.mod	3632 bytes
new-debian13/boot/grub/i386-pc/part_acorn.mod	1588 bytes
new-debian13/boot/grub/i386-pc/iso9660.mod	9252 bytes
new-debian13/boot/grub/i386-pc/exfctest.mod	1380 bytes
new-debian13/boot/grub/i386-pc/ufs1_be.mod	5652 bytes
new-debian13/boot/grub/i386-pc/adler32.mod	1200 bytes
new-debian13/boot/grub/i386-pc/pata.mod	4808 bytes
new-debian13/boot/grub/i386-pc/915resolution.mod	7820 bytes
new-debian13/boot/grub/i386-pc/serial.mod	9948 bytes
new-debian13/boot/grub/i386-pc/video_cirrus.mod	6020 bytes
new-debian13/boot/grub/i386-pc/afsplitter.mod	1508 bytes
new-debian13/boot/grub/i386-pc/part_apple.mod	2052 bytes
new-debian13/boot/grub/i386-pc/geli.mod	5600 bytes
new-debian13/boot/grub/i386-pc/multiboot2.mod	15932 bytes
new-debian13/boot/grub/i386-pc/cmp_test.mod	4580 bytes
new-debian13/boot/grub/i386-pc/bufio.mod	2092 bytes
new-debian13/boot/grub/i386-pc/echo.mod	1896 bytes
new-debian13/boot/grub/i386-pc/regexp.mod	50888 bytes
new-debian13/boot/grub/i386-pc/minix2_be.mod	3864 bytes
new-debian13/boot/grub/i386-pc/legacy_password_test.mod	14396 bytes
new-debian13/boot/grub/i386-pc/verifiers.mod	2608 bytes
new-debian13/boot/grub/i386-pc/xnu_uuid.mod	2084 bytes
new-debian13/boot/grub/i386-pc/zfscrypt.mod	5468 bytes
new-debian13/boot/grub/i386-pc/zfs.mod	40876 bytes
new-debian13/boot/grub/i386-pc/sleep_test.mod	2312 bytes
new-debian13/boot/grub/i386-pc/datetime.mod	2148 bytes
new-debian13/boot/grub/i386-pc/elf.mod	5824 bytes
new-debian13/boot/grub/i386-pc/iorw.mod	2780 bytes
new-debian13/boot/grub/i386-pc/linux.mod	13504 bytes
new-debian13/boot/grub/i386-pc/chain.mod	3396 bytes
new-debian13/boot/grub/i386-pc/password.mod	1820 bytes
new-debian13/boot/grub/i386-pc/hashsum.mod	5164 bytes
new-debian13/boot/grub/i386-pc/ntfs.mod	10632 bytes
new-debian13/boot/grub/i386-pc/lsmmap.mod	1792 bytes
new-debian13/boot/grub/i386-pc/minix2.mod	3724 bytes
new-debian13/boot/grub/i386-pc/core.img	28366 bytes
new-debian13/boot/grub/i386-pc/progress.mod	2144 bytes
new-debian13/boot/grub/i386-pc/date.mod	2096 bytes
new-debian13/boot/grub/i386-pc/gcry_sha512.mod	7724 bytes
new-debian13/boot/grub/i386-pc/memrw.mod	2796 bytes
new-debian13/boot/grub/i386-pc/gfxterm_menu.mod	4888 bytes
new-debian13/boot/grub/i386-pc/bswap_test.mod	2280 bytes
new-debian13/boot/grub/i386-pc/ata.mod	5544 bytes
new-debian13/boot/grub/i386-pc/ls.mod	3868 bytes
new-debian13/boot/grub/i386-pc/gcry_camellia.mod	33532 bytes
new-debian13/boot/grub/i386-pc/tga.mod	4592 bytes
new-debian13/boot/grub/i386-pc/cat.mod	2816 bytes
new-debian13/boot/grub/i386-pc/boot.mod	2628 bytes
new-debian13/boot/grub/i386-pc/cmp.mod	2208 bytes
new-debian13/boot/grub/i386-pc/hello.mod	1140 bytes
new-debian13/boot/grub/i386-pc/pgp.mod	11388 bytes
new-debian13/boot/grub/i386-pc/part_sunpc.mod	1588 bytes
new-debian13/boot/grub/i386-pc/cmosdump.mod	1164 bytes
new-debian13/boot/grub/i386-pc/usbserial_usbdebug.mod	1460 bytes
new-debian13/boot/grub/i386-pc/hexdump.mod	3052 bytes
new-debian13/boot/grub/i386-pc/vga.mod	4940 bytes
new-debian13/boot/grub/i386-pc/zstd.mod	45736 bytes
new-debian13/boot/grub/i386-pc/hwmatch.mod	2452 bytes
new-debian13/boot/grub/i386-pc/gcry_sha256.mod	4324 bytes
new-debian13/boot/grub/i386-pc/drivemap.mod	5296 bytes
new-debian13/boot/grub/i386-pc/test.mod	5208 bytes
new-debian13/boot/grub/i386-pc/gcry_idea.mod	2872 bytes
new-debian13/boot/grub/i386-pc/newc.mod	3152 bytes
new-debian13/boot/grub/i386-pc/part_amiga.mod	1812 bytes
new-debian13/boot/grub/i386-pc/part_sun.mod	1436 bytes
new-debian13/boot/grub/i386-pc/reboot.mod	1628 bytes
new-debian13/boot/grub/i386-pc/all_video.mod	492 bytes
new-debian13/boot/grub/i386-pc/gettext.mod	4892 bytes
new-debian13/boot/grub/i386-pc/mdraid09.mod	2104 bytes
new-debian13/boot/grub/i386-pc/setpci.mod	5208 bytes
new-debian13/boot/grub/i386-pc/gcry_serpent.mod	17740 bytes
new-debian13/boot/grub/i386-pc/strtoull_test.mod	2112 bytes
new-debian13/boot/grub/i386-pc/disk.mod	2364 bytes
new-debian13/boot/grub/i386-pc/div.mod	956 bytes
new-debian13/boot/grub/i386-pc/testload.mod	2712 bytes
new-debian13/boot/grub/i386-pc/usbserial_pl2303.mod	2632 bytes
new-debian13/boot/grub/i386-pc/cmdline_cat_test.mod	2944 bytes
new-debian13/boot/grub/i386-pc/search_label.mod	3124 bytes
new-debian13/boot/grub/i386-pc/fs.lst	219 bytes
new-debian13/boot/grub/i386-pc/romfs.mod	4080 bytes
new-debian13/boot/grub/i386-pc/hdparm.mod	6504 bytes
new-debian13/boot/grub/i386-pc/gfxterm.mod	9872 bytes
new-debian13/boot/grub/i386-pc/biosdisk.mod	4616 bytes
new-debian13/boot/grub/i386-pc/plan9.mod	6268 bytes
new-debian13/boot/grub/i386-pc/crypto.lst	936 bytes
new-debian13/boot/grub/i386-pc/crc64.mod	1552 bytes
new-debian13/boot/grub/i386-pc/offsetio.mod	1444 bytes
new-debian13/boot/grub/i386-pc/multiboot.mod	14900 bytes
new-debian13/boot/grub/i386-pc/terminal.lst	202 bytes
new-debian13/boot/grub/i386-pc/minix3.mod	3648 bytes
new-debian13/boot/grub/i386-pc/ahci.mod	15608 bytes
new-debian13/boot/grub/i386-pc/ctz_test.mod	1684 bytes
new-debian13/boot/grub/i386-pc/true.mod	1152 bytes
new-debian13/boot/grub/i386-pc/minix.mod	3592 bytes
new-debian13/boot/grub/i386-pc/read.mod	1764 bytes
new-debian13/boot/grub/i386-pc/datehook.mod	1720 bytes
new-debian13/boot/grub/i386-pc/part_dfly.mod	1712 bytes
new-debian13/boot/grub/i386-pc/sleep.mod	2116 bytes
new-debian13/boot/grub/i386-pc/minix_be.mod	3732 bytes
new-debian13/boot/grub/i386-pc/wrmsr.mod	1448 bytes
new-debian13/boot/grub/i386-pc/part_gpt.mod	2300 bytes
new-debian13/boot/grub/i386-pc/btrfs.mod	20048 bytes
new-debian13/boot/grub/i386-pc/gcry_rfc2268.mod	2260 bytes
new-debian13/boot/grub/i386-pc/cbls.mod	3336 bytes
new-debian13/boot/grub/i386-pc/ufs1.mod	5236 bytes
new-debian13/boot/grub/i386-pc/probe.mod	3500 bytes
new-debian13/boot/grub/i386-pc/freedos.mod	2612 bytes
new-debian13/boot/grub/i386-pc/mmap.mod	8480 bytes
new-debian13/boot/grub/i386-pc/gdb.mod	25096 bytes
new-debian13/boot/grub/i386-pc/nilfs2.mod	6732 bytes
new-debian13/boot/grub/i386-pc/mpi.mod	27464 bytes
new-debian13/boot/grub/i386-pc/crypto.mod	4896 bytes
new-debian13/boot/grub/i386-pc/video_colors.mod	5612 bytes
new-debian13/boot/grub/i386-pc/halt.mod	4616 bytes
new-debian13/boot/grub/i386-pc/archelp.mod	3024 bytes
new-debian13/boot/grub/i386-pc/tftp.mod	5360 bytes
new-debian13/boot/grub/i386-pc/exfat.mod	5988 bytes
new-debian13/boot/grub/i386-pc/minicmd.mod	3568 bytes
new-debian13/boot/grub/i386-pc/jpeg.mod	7804 bytes
new-debian13/boot/grub/i386-pc/cpio.mod	2744 bytes
new-debian13/boot/grub/i386-pc/gcry_cast5.mod	16304 bytes
new-debian13/boot/grub/i386-pc/gcry_seed.mod	14772 bytes
new-debian13/boot/grub/i386-pc/modinfo.sh	2639 bytes
new-debian13/boot/grub/i386-pc/mul_test.mod	1972 bytes
new-debian13/boot/grub/i386-pc/usb.mod	10368 bytes
new-debian13/boot/grub/i386-pc/procfs.mod	2272 bytes
new-debian13/boot/grub/i386-pc/cmostest.mod	1824 bytes
new-debian13/boot/grub/i386-pc/http.mod	5828 bytes
new-debian13/boot/grub/i386-pc/shift_test.mod	2424 bytes
new-debian13/boot/grub/i386-pc/lsacpi.mod	4740 bytes
new-debian13/boot/grub/i386-pc/hfs.mod	6856 bytes
new-debian13/boot/grub/i386-pc/search_fs_uuid.mod	3192 bytes
new-debian13/boot/grub/i386-pc/udf.mod	8784 bytes
new-debian13/boot/grub/i386-pc/time.mod	1456 bytes
new-debian13/boot/grub/i386-pc/testspeed.mod	2244 bytes
new-debian13/boot/grub/i386-pc/zfsinfo.mod	6484 bytes
new-debian13/boot/grub/i386-pc/search_fs_file.mod	3128 bytes
new-debian13/boot/grub/i386-pc/xfs.mod	8196 bytes
new-debian13/boot/grub/i386-pc/gcry_des.mod	19084 bytes
new-debian13/boot/grub/i386-pc/blocklist.mod	2004 bytes
new-debian13/boot/grub/i386-pc/json.mod	4268 bytes
new-debian13/boot/grub/i386-pc/signature_test.mod	6360 bytes
new-debian13/boot/grub/i386-pc/lzopio.mod	4816 bytes
new-debian13/boot/grub/fonts/unicode.pf2	2411806 bytes
new-debian13/boot/grub/grubenv	1024 bytes
new-debian13/boot/grub/grub.cfg	11984 bytes
old-debian12/system-info.txt	1289 bytes
old-debian12/var/log/cloud-init.log	249626 bytes
old-debian12/var/log/cloud-init-output.log	52470 bytes
old-debian12/var/lib/dpkg/status	957918 bytes
old-debian12/etc/hostname	16 bytes
old-debian12/etc/modprobe.d/dkms.conf	127 bytes
old-debian12/etc/modprobe.d/blacklist.conf	34 bytes
old-debian12/etc/debian_version	6 bytes
old-debian12/etc/systemd/system/sshd-keygen@.service.d/disable-sshd-keygen-if-cloud-init-active.conf	410 bytes
old-debian12/etc/systemd/system/syncthing.service	270 bytes
old-debian12/etc/network/if-up.d/ethtool	1685 bytes
old-debian12/etc/network/if-pre-up.d/ethtool	344 bytes
old-debian12/etc/modules	248 bytes
old-debian12/etc/fstab	177 bytes
old-debian12/etc/resolv.conf	134 bytes
old-debian12/etc/dhcp/debug	1426 bytes
old-debian12/etc/dhcp/dhclient-exit-hooks.d/timesyncd	1388 bytes
old-debian12/etc/dhcp/dhclient-exit-hooks.d/rfc3442-classless-routes	1756 bytes
old-debian12/etc/dhcp/dhclient-exit-hooks.d/hook-dhclient	805 bytes
old-debian12/etc/dhcp/dhclient.conf	1735 bytes
old-debian12/etc/NetworkManager/dispatcher.d/cloud-init-hook-network-manager	719 bytes
old-debian12/etc/default/grub	487 bytes
old-debian12/etc/default/grub.d/15_timeout.cfg	15 bytes
old-debian12/etc/default/grub.d/10_cloud.cfg	99 bytes
old-debian12/etc/default/grub.d/init-select.cfg	274 bytes
old-debian12/etc/modules-load.d/zfs.conf	4 bytes
old-debian12/etc/netplan/50-cloud-init.yaml	812 bytes
old-debian12/etc/apt/sources.list.d/debian.sources	375 bytes
old-debian12/etc/apt/sources.list.d/docker.list	115 bytes
old-debian12/etc/apt/sources.list	322 bytes
old-debian12/etc/initramfs-tools/initramfs.conf	1583 bytes
old-debian12/etc/initramfs-tools/update-initramfs.conf	378 bytes
old-debian12/etc/initramfs-tools/modules	250 bytes
old-debian12/etc/cloud/cloud.cfg	2796 bytes
old-debian12/etc/cloud/cloud.cfg.d/README	167 bytes
old-debian12/etc/cloud/cloud.cfg.d/01_debian_cloud.cfg	309 bytes
old-debian12/etc/cloud/cloud.cfg.d/05_logging.cfg	2070 bytes
old-debian12/etc/cloud/cloud.cfg.d/99-ssh.cfg	48 bytes
old-debian12/etc/cloud/templates/hosts.redhat.tmpl	912 bytes
old-debian12/etc/cloud/templates/chrony.conf.sles.tmpl	991 bytes
old-debian12/etc/cloud/templates/ntp.conf.sles.tmpl	2755 bytes
old-debian12/etc/cloud/templates/ntp.conf.fedora.tmpl	2074 bytes
old-debian12/etc/cloud/templates/sources.list.debian.tmpl	1439 bytes
old-debian12/etc/cloud/templates/chrony.conf.alpine.tmpl	1113 bytes
old-debian12/etc/cloud/templates/chrony.conf.debian.tmpl	1111 bytes
old-debian12/etc/cloud/templates/chrony.conf.freebsd.tmpl	14216 bytes
old-debian12/etc/cloud/templates/hosts.alpine.tmpl	919 bytes
old-debian12/etc/cloud/templates/ntp.conf.debian.tmpl	2150 bytes
old-debian12/etc/cloud/templates/timesyncd.conf.tmpl	203 bytes
old-debian12/etc/cloud/templates/ntp.conf.photon.tmpl	1850 bytes
old-debian12/etc/cloud/templates/hosts.suse.tmpl	1067 bytes
old-debian12/etc/cloud/templates/chrony.conf.centos.tmpl	1181 bytes
old-debian12/etc/cloud/templates/hosts.gentoo.tmpl	910 bytes
old-debian12/etc/cloud/templates/chrony.conf.cos.tmpl	775 bytes
old-debian12/etc/cloud/templates/chrony.conf.rhel.tmpl	1181 bytes
old-debian12/etc/cloud/templates/ntpd.conf.openbsd.tmpl	491 bytes
old-debian12/etc/cloud/templates/ntp.conf.opensuse.tmpl	2755 bytes
old-debian12/etc/cloud/templates/ntp.conf.alpine.tmpl	203 bytes
old-debian12/etc/cloud/templates/hosts.debian.tmpl	845 bytes
old-debian12/etc/cloud/templates/chrony.conf.opensuse.tmpl	991 bytes
old-debian12/etc/cloud/templates/resolv.conf.tmpl	921 bytes
old-debian12/etc/cloud/templates/ntp.conf.rhel.tmpl	1852 bytes
old-debian12/etc/cloud/templates/chef_client.rb.tmpl	1667 bytes
old-debian12/etc/cloud/templates/hosts.photon.tmpl	874 bytes
old-debian12/etc/cloud/templates/chrony.conf.ubuntu.tmpl	1280 bytes
old-debian12/etc/cloud/templates/host.mariner.tmpl	898 bytes
old-debian12/etc/cloud/templates/hosts.arch.tmpl	841 bytes
old-debian12/etc/cloud/templates/systemd.resolved.conf.tmpl	504 bytes
old-debian12/etc/cloud/templates/sources.list.ubuntu.tmpl	2504 bytes
old-debian12/etc/cloud/templates/ntp.conf.freebsd.tmpl	4159 bytes
old-debian12/etc/cloud/templates/chrony.conf.photon.tmpl	1269 bytes
old-debian12/etc/cloud/templates/ntp.conf.ubuntu.tmpl	2509 bytes
old-debian12/etc/cloud/templates/chrony.conf.fedora.tmpl	1269 bytes
old-debian12/etc/cloud/templates/hosts.freebsd.tmpl	911 bytes
old-debian12/etc/cloud/clean.d/README	883 bytes
old-debian12/etc/hosts	565 bytes
old-debian12/boot/grub/x86_64-efi/appleldr.mod	5128 bytes
old-debian12/boot/grub/x86_64-efi/ntfscomp.mod	5648 bytes
old-debian12/boot/grub/x86_64-efi/tr.mod	3568 bytes
old-debian12/boot/grub/x86_64-efi/macbless.mod	4736 bytes
old-debian12/boot/grub/x86_64-efi/usbserial_ftdi.mod	3328 bytes
old-debian12/boot/grub/x86_64-efi/gcry_sha1.mod	8064 bytes
old-debian12/boot/grub/x86_64-efi/uhci.mod	9864 bytes
old-debian12/boot/grub/x86_64-efi/scsi.mod	6976 bytes
old-debian12/boot/grub/x86_64-efi/jfs.mod	9384 bytes
old-debian12/boot/grub/x86_64-efi/fat.mod	8584 bytes
old-debian12/boot/grub/x86_64-efi/nativedisk.mod	6624 bytes
old-debian12/boot/grub/x86_64-efi/gcry_arcfour.mod	2280 bytes
old-debian12/boot/grub/x86_64-efi/syslinuxcfg.mod	29320 bytes
old-debian12/boot/grub/x86_64-efi/cbtable.mod	1504 bytes
old-debian12/boot/grub/x86_64-efi/ehci.mod	24792 bytes
old-debian12/boot/grub/x86_64-efi/png.mod	10816 bytes
old-debian12/boot/grub/x86_64-efi/xnu.mod	41728 bytes
old-debian12/boot/grub/x86_64-efi/ldm.mod	8056 bytes
old-debian12/boot/grub/x86_64-efi/spkmodem.mod	2968 bytes
old-debian12/boot/grub/x86_64-efi/cpuid.mod	2480 bytes
old-debian12/boot/grub/x86_64-efi/part_msdos.mod	2912 bytes
old-debian12/boot/grub/x86_64-efi/video_bochs.mod	8456 bytes
old-debian12/boot/grub/x86_64-efi/configfile.mod	3160 bytes
old-debian12/boot/grub/x86_64-efi/odc.mod	4552 bytes
old-debian12/boot/grub/x86_64-efi/ufs2.mod	7848 bytes
old-debian12/boot/grub/x86_64-efi/affs.mod	8016 bytes
old-debian12/boot/grub/x86_64-efi/video.lst	41 bytes
old-debian12/boot/grub/x86_64-efi/smbios.mod	8328 bytes
old-debian12/boot/grub/x86_64-efi/cpio_be.mod	4552 bytes
old-debian12/boot/grub/x86_64-efi/gcry_tiger.mod	13152 bytes
old-debian12/boot/grub/x86_64-efi/cbfs.mod	5816 bytes
old-debian12/boot/grub/x86_64-efi/normal.mod	174760 bytes
old-debian12/boot/grub/x86_64-efi/bitmap.mod	3064 bytes
old-debian12/boot/grub/x86_64-efi/video.mod	8688 bytes
old-debian12/boot/grub/x86_64-efi/play.mod	3848 bytes
old-debian12/boot/grub/x86_64-efi/raid6rec.mod	3320 bytes
old-debian12/boot/grub/x86_64-efi/raid5rec.mod	1864 bytes
old-debian12/boot/grub/x86_64-efi/bitmap_scale.mod	5248 bytes
old-debian12/boot/grub/x86_64-efi/gcry_rijndael.mod	20432 bytes
old-debian12/boot/grub/x86_64-efi/cbmemc.mod	3752 bytes
old-debian12/boot/grub/x86_64-efi/gcry_dsa.mod	3288 bytes
old-debian12/boot/grub/x86_64-efi/sfs.mod	7880 bytes
old-debian12/boot/grub/x86_64-efi/reiserfs.mod	13736 bytes
old-debian12/boot/grub/x86_64-efi/efinet.mod	9952 bytes
old-debian12/boot/grub/x86_64-efi/fshelp.mod	4360 bytes
old-debian12/boot/grub/x86_64-efi/xnu_uuid_test.mod	3024 bytes
old-debian12/boot/grub/x86_64-efi/squash4.mod	10024 bytes
old-debian12/boot/grub/x86_64-efi/gcry_whirlpool.mod	22752 bytes
old-debian12/boot/grub/x86_64-efi/minix3_be.mod	5896 bytes
old-debian12/boot/grub/x86_64-efi/pbkdf2_test.mod	3352 bytes
old-debian12/boot/grub/x86_64-efi/net.mod	93168 bytes
old-debian12/boot/grub/x86_64-efi/morse.mod	3152 bytes
old-debian12/boot/grub/x86_64-efi/luks.mod	6424 bytes
old-debian12/boot/grub/x86_64-efi/hfspluscomp.mod	4208 bytes
old-debian12/boot/grub/x86_64-efi/password_pbkdf2.mod	4328 bytes
old-debian12/boot/grub/x86_64-efi/ext2.mod	8664 bytes
old-debian12/boot/grub/x86_64-efi/diskfilter.mod	13168 bytes
old-debian12/boot/grub/x86_64-efi/setjmp_test.mod	2520 bytes
old-debian12/boot/grub/x86_64-efi/parttool.lst	17 bytes
old-debian12/boot/grub/x86_64-efi/afs.mod	8512 bytes
old-debian12/boot/grub/x86_64-efi/acpi.mod	16016 bytes
old-debian12/boot/grub/x86_64-efi/mdraid1x.mod	2560 bytes
old-debian12/boot/grub/x86_64-efi/memdisk.mod	3176 bytes
old-debian12/boot/grub/x86_64-efi/f2fs.mod	10064 bytes
old-debian12/boot/grub/x86_64-efi/load.cfg	98 bytes
old-debian12/boot/grub/x86_64-efi/usbms.mod	10976 bytes
old-debian12/boot/grub/x86_64-efi/part_plan.mod	2416 bytes
old-debian12/boot/grub/x86_64-efi/fixvideo.mod	2768 bytes
old-debian12/boot/grub/x86_64-efi/extcmd.mod	7512 bytes
old-debian12/boot/grub/x86_64-efi/part_bsd.mod	4064 bytes
old-debian12/boot/grub/x86_64-efi/gcry_rsa.mod	3216 bytes
old-debian12/boot/grub/x86_64-efi/videoinfo.mod	5208 bytes
old-debian12/boot/grub/x86_64-efi/pcidump.mod	3424 bytes
old-debian12/boot/grub/x86_64-efi/priority_queue.mod	2160 bytes
old-debian12/boot/grub/x86_64-efi/eval.mod	2088 bytes
old-debian12/boot/grub/x86_64-efi/linux16.mod	8472 bytes
old-debian12/boot/grub/x86_64-efi/macho.mod	10624 bytes
old-debian12/boot/grub/x86_64-efi/gcry_crc.mod	11744 bytes
old-debian12/boot/grub/x86_64-efi/moddep.lst	5237 bytes
old-debian12/boot/grub/x86_64-efi/setjmp.mod	912 bytes
old-debian12/boot/grub/x86_64-efi/videotest_checksum.mod	3584 bytes
old-debian12/boot/grub/x86_64-efi/keystatus.mod	2872 bytes
old-debian12/boot/grub/x86_64-efi/pbkdf2.mod	1824 bytes
old-debian12/boot/grub/x86_64-efi/file.mod	26488 bytes
old-debian12/boot/grub/x86_64-efi/bsd.mod	48384 bytes
old-debian12/boot/grub/x86_64-efi/luks2.mod	20584 bytes
old-debian12/boot/grub/x86_64-efi/gfxterm_background.mod	4304 bytes
old-debian12/boot/grub/x86_64-efi/lvm.mod	11840 bytes
old-debian12/boot/grub/x86_64-efi/xzio.mod	19576 bytes
old-debian12/boot/grub/x86_64-efi/partmap.lst	111 bytes
old-debian12/boot/grub/x86_64-efi/grub.efi	147456 bytes
old-debian12/boot/grub/x86_64-efi/gfxmenu.mod	59224 bytes
old-debian12/boot/grub/x86_64-efi/msdospart.mod	3592 bytes
old-debian12/boot/grub/x86_64-efi/rdmsr.mod	3008 bytes
old-debian12/boot/grub/x86_64-efi/test_blockarg.mod	1952 bytes
old-debian12/boot/grub/x86_64-efi/random.mod	3552 bytes
old-debian12/boot/grub/x86_64-efi/cs5536.mod	3848 bytes
old-debian12/boot/grub/x86_64-efi/gcry_md4.mod	4008 bytes
old-debian12/boot/grub/x86_64-efi/ohci.mod	15344 bytes
old-debian12/boot/grub/x86_64-efi/terminal.mod	6584 bytes
old-debian12/boot/grub/x86_64-efi/lspci.mod	7120 bytes
old-debian12/boot/grub/x86_64-efi/tar.mod	5072 bytes
old-debian12/boot/grub/x86_64-efi/terminfo.mod	19080 bytes
old-debian12/boot/grub/x86_64-efi/usbtest.mod	5504 bytes
old-debian12/boot/grub/x86_64-efi/trig.mod	1936 bytes
old-debian12/boot/grub/x86_64-efi/videotest.mod	5304 bytes
old-debian12/boot/grub/x86_64-efi/gcry_rmd160.mod	7824 bytes
old-debian12/boot/grub/x86_64-efi/backtrace.mod	2400 bytes
old-debian12/boot/grub/x86_64-efi/cryptodisk.mod	18568 bytes
old-debian12/boot/grub/x86_64-efi/functional_test.mod	46464 bytes
old-debian12/boot/grub/x86_64-efi/legacycfg.mod	45272 bytes
old-debian12/boot/grub/x86_64-efi/part_dvh.mod	2096 bytes
old-debian12/boot/grub/x86_64-efi/hfsplus.mod	10952 bytes
old-debian12/boot/grub/x86_64-efi/aout.mod	1368 bytes
old-debian12/boot/grub/x86_64-efi/at_keyboard.mod	6560 bytes
old-debian12/boot/grub/x86_64-efi/help.mod	3856 bytes
old-debian12/boot/grub/x86_64-efi/keylayouts.mod	6496 bytes
old-debian12/boot/grub/x86_64-efi/relocator.mod	26208 bytes
old-debian12/boot/grub/x86_64-efi/gcry_twofish.mod	33664 bytes
old-debian12/boot/grub/x86_64-efi/gptsync.mod	5232 bytes
old-debian12/boot/grub/x86_64-efi/usbserial_common.mod	2768 bytes
old-debian12/boot/grub/x86_64-efi/dm_nv.mod	2712 bytes
old-debian12/boot/grub/x86_64-efi/gcry_blowfish.mod	9264 bytes
old-debian12/boot/grub/x86_64-efi/loadenv.mod	9000 bytes
old-debian12/boot/grub/x86_64-efi/bfs.mod	9592 bytes
old-debian12/boot/grub/x86_64-efi/div_test.mod	7808 bytes
old-debian12/boot/grub/x86_64-efi/video_fb.mod	28144 bytes
old-debian12/boot/grub/x86_64-efi/mdraid09_be.mod	2712 bytes
old-debian12/boot/grub/x86_64-efi/loopback.mod	5064 bytes
old-debian12/boot/grub/x86_64-efi/command.lst	3677 bytes
old-debian12/boot/grub/x86_64-efi/search.mod	5336 bytes
old-debian12/boot/grub/x86_64-efi/lssal.mod	3704 bytes
old-debian12/boot/grub/x86_64-efi/gzio.mod	12368 bytes
old-debian12/boot/grub/x86_64-efi/parttool.mod	7192 bytes
old-debian12/boot/grub/x86_64-efi/font.mod	19224 bytes
old-debian12/boot/grub/x86_64-efi/usb_keyboard.mod	5656 bytes
old-debian12/boot/grub/x86_64-efi/cbtime.mod	4384 bytes
old-debian12/boot/grub/x86_64-efi/gcry_md5.mod	4464 bytes
old-debian12/boot/grub/x86_64-efi/part_acorn.mod	2208 bytes
old-debian12/boot/grub/x86_64-efi/iso9660.mod	12232 bytes
old-debian12/boot/grub/x86_64-efi/exfctest.mod	2048 bytes
old-debian12/boot/grub/x86_64-efi/ufs1_be.mod	8008 bytes
old-debian12/boot/grub/x86_64-efi/adler32.mod	1832 bytes
old-debian12/boot/grub/x86_64-efi/pata.mod	7352 bytes
old-debian12/boot/grub/x86_64-efi/serial.mod	14456 bytes
old-debian12/boot/grub/x86_64-efi/video_cirrus.mod	8840 bytes
old-debian12/boot/grub/x86_64-efi/afsplitter.mod	2024 bytes
old-debian12/boot/grub/x86_64-efi/part_apple.mod	2888 bytes
old-debian12/boot/grub/x86_64-efi/geli.mod	9088 bytes
old-debian12/boot/grub/x86_64-efi/multiboot2.mod	23680 bytes
old-debian12/boot/grub/x86_64-efi/cmp_test.mod	6232 bytes
old-debian12/boot/grub/x86_64-efi/bufio.mod	2752 bytes
old-debian12/boot/grub/x86_64-efi/echo.mod	2912 bytes
old-debian12/boot/grub/x86_64-efi/regexp.mod	77736 bytes
old-debian12/boot/grub/x86_64-efi/minix2_be.mod	5864 bytes
old-debian12/boot/grub/x86_64-efi/legacy_password_test.mod	15816 bytes
old-debian12/boot/grub/x86_64-efi/xnu_uuid.mod	3184 bytes
old-debian12/boot/grub/x86_64-efi/loadbios.mod	4544 bytes
old-debian12/boot/grub/x86_64-efi/zfscrypt.mod	8392 bytes
old-debian12/boot/grub/x86_64-efi/zfs.mod	57328 bytes
old-debian12/boot/grub/x86_64-efi/sleep_test.mod	3008 bytes
old-debian12/boot/grub/x86_64-efi/datetime.mod	2928 bytes
old-debian12/boot/grub/x86_64-efi/elf.mod	6144 bytes
old-debian12/boot/grub/x86_64-efi/iorw.mod	4240 bytes
old-debian12/boot/grub/x86_64-efi/linux.mod	20216 bytes
old-debian12/boot/grub/x86_64-efi/chain.mod	8728 bytes
old-debian12/boot/grub/x86_64-efi/password.mod	2832 bytes
old-debian12/boot/grub/x86_64-efi/hashsum.mod	8048 bytes
old-debian12/boot/grub/x86_64-efi/ntfs.mod	15984 bytes
old-debian12/boot/grub/x86_64-efi/lsmmap.mod	2832 bytes
old-debian12/boot/grub/x86_64-efi/minix2.mod	5760 bytes
old-debian12/boot/grub/x86_64-efi/progress.mod	3072 bytes
old-debian12/boot/grub/x86_64-efi/date.mod	3104 bytes
old-debian12/boot/grub/x86_64-efi/gcry_sha512.mod	5976 bytes
old-debian12/boot/grub/x86_64-efi/memrw.mod	4208 bytes
old-debian12/boot/grub/x86_64-efi/gfxterm_menu.mod	7616 bytes
old-debian12/boot/grub/x86_64-efi/bswap_test.mod	3080 bytes
old-debian12/boot/grub/x86_64-efi/ata.mod	8512 bytes
old-debian12/boot/grub/x86_64-efi/ls.mod	6312 bytes
old-debian12/boot/grub/x86_64-efi/gcry_camellia.mod	28176 bytes
old-debian12/boot/grub/x86_64-efi/tpm.mod	6280 bytes
old-debian12/boot/grub/x86_64-efi/tga.mod	6304 bytes
old-debian12/boot/grub/x86_64-efi/cat.mod	4248 bytes
old-debian12/boot/grub/x86_64-efi/boot.mod	3648 bytes
old-debian12/boot/grub/x86_64-efi/cmp.mod	2952 bytes
old-debian12/boot/grub/x86_64-efi/hello.mod	1760 bytes
old-debian12/boot/grub/x86_64-efi/pgp.mod	19112 bytes
old-debian12/boot/grub/x86_64-efi/lsefimmap.mod	3568 bytes
old-debian12/boot/grub/x86_64-efi/part_sunpc.mod	2416 bytes
old-debian12/boot/grub/x86_64-efi/usbserial_usbdebug.mod	2240 bytes
old-debian12/boot/grub/x86_64-efi/hexdump.mod	4552 bytes
old-debian12/boot/grub/x86_64-efi/core.efi	147456 bytes
old-debian12/boot/grub/x86_64-efi/zstd.mod	78664 bytes
old-debian12/boot/grub/x86_64-efi/gcry_sha256.mod	5104 bytes
old-debian12/boot/grub/x86_64-efi/test.mod	7584 bytes
old-debian12/boot/grub/x86_64-efi/gcry_idea.mod	3864 bytes
old-debian12/boot/grub/x86_64-efi/newc.mod	4672 bytes
old-debian12/boot/grub/x86_64-efi/part_amiga.mod	2520 bytes
old-debian12/boot/grub/x86_64-efi/part_sun.mod	2160 bytes
old-debian12/boot/grub/x86_64-efi/reboot.mod	1520 bytes
old-debian12/boot/grub/x86_64-efi/all_video.mod	704 bytes
old-debian12/boot/grub/x86_64-efi/gettext.mod	8344 bytes
old-debian12/boot/grub/x86_64-efi/linuxefi.mod	9168 bytes
old-debian12/boot/grub/x86_64-efi/mdraid09.mod	2648 bytes
old-debian12/boot/grub/x86_64-efi/lsefisystab.mod	4304 bytes
old-debian12/boot/grub/x86_64-efi/setpci.mod	8208 bytes
old-debian12/boot/grub/x86_64-efi/gcry_serpent.mod	16344 bytes
old-debian12/boot/grub/x86_64-efi/strtoull_test.mod	3160 bytes
old-debian12/boot/grub/x86_64-efi/disk.mod	2976 bytes
old-debian12/boot/grub/x86_64-efi/div.mod	1240 bytes
old-debian12/boot/grub/x86_64-efi/testload.mod	3768 bytes
old-debian12/boot/grub/x86_64-efi/usbserial_pl2303.mod	3656 bytes
old-debian12/boot/grub/x86_64-efi/cmdline_cat_test.mod	4496 bytes
old-debian12/boot/grub/x86_64-efi/search_label.mod	4712 bytes
old-debian12/boot/grub/x86_64-efi/fs.lst	219 bytes
old-debian12/boot/grub/x86_64-efi/romfs.mod	5704 bytes
old-debian12/boot/grub/x86_64-efi/hdparm.mod	10248 bytes
old-debian12/boot/grub/x86_64-efi/gfxterm.mod	16520 bytes
old-debian12/boot/grub/x86_64-efi/crypto.lst	936 bytes
old-debian12/boot/grub/x86_64-efi/crc64.mod	2032 bytes
old-debian12/boot/grub/x86_64-efi/offsetio.mod	2136 bytes
old-debian12/boot/grub/x86_64-efi/lsefi.mod	5152 bytes
old-debian12/boot/grub/x86_64-efi/multiboot.mod	20728 bytes
old-debian12/boot/grub/x86_64-efi/terminal.lst	162 bytes
old-debian12/boot/grub/x86_64-efi/efi_uga.mod	7032 bytes
old-debian12/boot/grub/x86_64-efi/efi_gop.mod	12640 bytes
old-debian12/boot/grub/x86_64-efi/minix3.mod	5792 bytes
old-debian12/boot/grub/x86_64-efi/efifwsetup.mod	2040 bytes
old-debian12/boot/grub/x86_64-efi/ahci.mod	21816 bytes
old-debian12/boot/grub/x86_64-efi/ctz_test.mod	2528 bytes
old-debian12/boot/grub/x86_64-efi/true.mod	1792 bytes
old-debian12/boot/grub/x86_64-efi/minix.mod	5640 bytes
old-debian12/boot/grub/x86_64-efi/read.mod	2336 bytes
old-debian12/boot/grub/x86_64-efi/datehook.mod	2912 bytes
old-debian12/boot/grub/x86_64-efi/part_dfly.mod	2568 bytes
old-debian12/boot/grub/x86_64-efi/sleep.mod	3272 bytes
old-debian12/boot/grub/x86_64-efi/minix_be.mod	5736 bytes
old-debian12/boot/grub/x86_64-efi/wrmsr.mod	2328 bytes
old-debian12/boot/grub/x86_64-efi/part_gpt.mod	3152 bytes
old-debian12/boot/grub/x86_64-efi/btrfs.mod	27456 bytes
old-debian12/boot/grub/x86_64-efi/gcry_rfc2268.mod	3000 bytes
old-debian12/boot/grub/x86_64-efi/cbls.mod	5552 bytes
old-debian12/boot/grub/x86_64-efi/ufs1.mod	7816 bytes
old-debian12/boot/grub/x86_64-efi/probe.mod	5480 bytes
old-debian12/boot/grub/x86_64-efi/mmap.mod	9320 bytes
old-debian12/boot/grub/x86_64-efi/nilfs2.mod	9872 bytes
old-debian12/boot/grub/x86_64-efi/mpi.mod	43544 bytes
old-debian12/boot/grub/x86_64-efi/crypto.mod	6832 bytes
old-debian12/boot/grub/x86_64-efi/video_colors.mod	9920 bytes
old-debian12/boot/grub/x86_64-efi/halt.mod	7544 bytes
old-debian12/boot/grub/x86_64-efi/archelp.mod	4536 bytes
old-debian12/boot/grub/x86_64-efi/tftp.mod	7752 bytes
old-debian12/boot/grub/x86_64-efi/exfat.mod	8456 bytes
old-debian12/boot/grub/x86_64-efi/minicmd.mod	5824 bytes
old-debian12/boot/grub/x86_64-efi/jpeg.mod	10728 bytes
old-debian12/boot/grub/x86_64-efi/cpio.mod	4552 bytes
old-debian12/boot/grub/x86_64-efi/gcry_cast5.mod	14712 bytes
old-debian12/boot/grub/x86_64-efi/gcry_seed.mod	12504 bytes
old-debian12/boot/grub/x86_64-efi/modinfo.sh	2513 bytes
old-debian12/boot/grub/x86_64-efi/mul_test.mod	2312 bytes
old-debian12/boot/grub/x86_64-efi/usb.mod	15544 bytes
old-debian12/boot/grub/x86_64-efi/procfs.mod	3712 bytes
old-debian12/boot/grub/x86_64-efi/http.mod	9032 bytes
old-debian12/boot/grub/x86_64-efi/shift_test.mod	2992 bytes
old-debian12/boot/grub/x86_64-efi/lsacpi.mod	7008 bytes
old-debian12/boot/grub/x86_64-efi/hfs.mod	10160 bytes
old-debian12/boot/grub/x86_64-efi/search_fs_uuid.mod	4768 bytes
old-debian12/boot/grub/x86_64-efi/udf.mod	12216 bytes
old-debian12/boot/grub/x86_64-efi/time.mod	2272 bytes
old-debian12/boot/grub/x86_64-efi/testspeed.mod	3416 bytes
old-debian12/boot/grub/x86_64-efi/zfsinfo.mod	10448 bytes
old-debian12/boot/grub/x86_64-efi/search_fs_file.mod	4648 bytes
old-debian12/boot/grub/x86_64-efi/xfs.mod	11272 bytes
old-debian12/boot/grub/x86_64-efi/gcry_des.mod	16320 bytes
old-debian12/boot/grub/x86_64-efi/blocklist.mod	2904 bytes
old-debian12/boot/grub/x86_64-efi/json.mod	4760 bytes
old-debian12/boot/grub/x86_64-efi/signature_test.mod	8144 bytes
old-debian12/boot/grub/x86_64-efi/lzopio.mod	6720 bytes
old-debian12/boot/grub/locale/pl.mo	125110 bytes
old-debian12/boot/grub/locale/de.mo	126120 bytes
old-debian12/boot/grub/locale/en@piglatin.mo	130742 bytes
old-debian12/boot/grub/locale/hu.mo	124455 bytes
old-debian12/boot/grub/locale/ja.mo	44778 bytes
old-debian12/boot/grub/locale/ro.mo	48394 bytes
old-debian12/boot/grub/locale/de_CH.mo	38861 bytes
old-debian12/boot/grub/locale/eo.mo	42753 bytes
old-debian12/boot/grub/locale/en@arabic.mo	156521 bytes
old-debian12/boot/grub/locale/nb.mo	115686 bytes
old-debian12/boot/grub/locale/da.mo	112645 bytes
old-debian12/boot/grub/locale/gl.mo	97369 bytes
old-debian12/boot/grub/locale/fr.mo	131785 bytes
old-debian12/boot/grub/locale/nl.mo	120604 bytes
old-debian12/boot/grub/locale/zh_TW.mo	29713 bytes
old-debian12/boot/grub/locale/en@cyrillic.mo	147664 bytes
old-debian12/boot/grub/locale/hr.mo	122210 bytes
old-debian12/boot/grub/locale/sl.mo	88650 bytes
old-debian12/boot/grub/locale/id.mo	28246 bytes
old-debian12/boot/grub/locale/ast.mo	120553 bytes
old-debian12/boot/grub/locale/es.mo	123550 bytes
old-debian12/boot/grub/locale/ca.mo	120975 bytes
old-debian12/boot/grub/locale/zh_CN.mo	82609 bytes
old-debian12/boot/grub/locale/tr.mo	78518 bytes
old-debian12/boot/grub/locale/de@hebrew.mo	189962 bytes
old-debian12/boot/grub/locale/lg.mo	8376 bytes
old-debian12/boot/grub/locale/ru.mo	160770 bytes
old-debian12/boot/grub/locale/en@greek.mo	147661 bytes
old-debian12/boot/grub/locale/en@hebrew.mo	169450 bytes
old-debian12/boot/grub/locale/pt_BR.mo	78830 bytes
old-debian12/boot/grub/locale/ko.mo	51383 bytes
old-debian12/boot/grub/locale/pt.mo	123810 bytes
old-debian12/boot/grub/locale/vi.mo	128946 bytes
old-debian12/boot/grub/locale/pa.mo	57875 bytes
old-debian12/boot/grub/locale/fi.mo	124342 bytes
old-debian12/boot/grub/locale/lt.mo	95787 bytes
old-debian12/boot/grub/locale/sv.mo	119990 bytes
old-debian12/boot/grub/locale/it.mo	118131 bytes
old-debian12/boot/grub/locale/en@quot.mo	115385 bytes
old-debian12/boot/grub/locale/sr.mo	158723 bytes
old-debian12/boot/grub/locale/uk.mo	167297 bytes
old-debian12/boot/grub/i386-pc/ntfscomp.mod	4328 bytes
old-debian12/boot/grub/i386-pc/tr.mod	2352 bytes
old-debian12/boot/grub/i386-pc/macbless.mod	3200 bytes
old-debian12/boot/grub/i386-pc/usbserial_ftdi.mod	2296 bytes
old-debian12/boot/grub/i386-pc/gcry_sha1.mod	8592 bytes
old-debian12/boot/grub/i386-pc/uhci.mod	6492 bytes
old-debian12/boot/grub/i386-pc/scsi.mod	4644 bytes
old-debian12/boot/grub/i386-pc/jfs.mod	6528 bytes
old-debian12/boot/grub/i386-pc/fat.mod	6124 bytes
old-debian12/boot/grub/i386-pc/nativedisk.mod	4156 bytes
old-debian12/boot/grub/i386-pc/gcry_arcfour.mod	1612 bytes
old-debian12/boot/grub/i386-pc/syslinuxcfg.mod	17420 bytes
old-debian12/boot/grub/i386-pc/cbtable.mod	1048 bytes
old-debian12/boot/grub/i386-pc/ehci.mod	16128 bytes
old-debian12/boot/grub/i386-pc/png.mod	8052 bytes
old-debian12/boot/grub/i386-pc/xnu.mod	27468 bytes
old-debian12/boot/grub/i386-pc/ldm.mod	6336 bytes
old-debian12/boot/grub/i386-pc/spkmodem.mod	2024 bytes
old-debian12/boot/grub/i386-pc/cpuid.mod	1664 bytes
old-debian12/boot/grub/i386-pc/part_msdos.mod	2280 bytes
old-debian12/boot/grub/i386-pc/video_bochs.mod	5588 bytes
old-debian12/boot/grub/i386-pc/configfile.mod	2224 bytes
old-debian12/boot/grub/i386-pc/odc.mod	2984 bytes
old-debian12/boot/grub/i386-pc/pxe.mod	3680 bytes
old-debian12/boot/grub/i386-pc/ufs2.mod	5436 bytes
old-debian12/boot/grub/i386-pc/affs.mod	5580 bytes
old-debian12/boot/grub/i386-pc/vga_text.mod	2140 bytes
old-debian12/boot/grub/i386-pc/video.lst	33 bytes
old-debian12/boot/grub/i386-pc/smbios.mod	5564 bytes
old-debian12/boot/grub/i386-pc/cpio_be.mod	3020 bytes
old-debian12/boot/grub/i386-pc/pxechain.mod	2616 bytes
old-debian12/boot/grub/i386-pc/gcry_tiger.mod	12244 bytes
old-debian12/boot/grub/i386-pc/cbfs.mod	3900 bytes
old-debian12/boot/grub/i386-pc/normal.mod	115096 bytes
old-debian12/boot/grub/i386-pc/bitmap.mod	2184 bytes
old-debian12/boot/grub/i386-pc/video.mod	5980 bytes
old-debian12/boot/grub/i386-pc/play.mod	2452 bytes
old-debian12/boot/grub/i386-pc/raid6rec.mod	2204 bytes
old-debian12/boot/grub/i386-pc/raid5rec.mod	1292 bytes
old-debian12/boot/grub/i386-pc/bitmap_scale.mod	3616 bytes
old-debian12/boot/grub/i386-pc/gcry_rijndael.mod	19312 bytes
old-debian12/boot/grub/i386-pc/cbmemc.mod	2448 bytes
old-debian12/boot/grub/i386-pc/gcry_dsa.mod	2188 bytes
old-debian12/boot/grub/i386-pc/sfs.mod	5128 bytes
old-debian12/boot/grub/i386-pc/reiserfs.mod	8800 bytes
old-debian12/boot/grub/i386-pc/fshelp.mod	2920 bytes
old-debian12/boot/grub/i386-pc/xnu_uuid_test.mod	1924 bytes
old-debian12/boot/grub/i386-pc/squash4.mod	7252 bytes
old-debian12/boot/grub/i386-pc/gcry_whirlpool.mod	24588 bytes
old-debian12/boot/grub/i386-pc/efiemu32.o	7616 bytes
old-debian12/boot/grub/i386-pc/lsapm.mod	2236 bytes
old-debian12/boot/grub/i386-pc/minix3_be.mod	3868 bytes
old-debian12/boot/grub/i386-pc/pbkdf2_test.mod	2100 bytes
old-debian12/boot/grub/i386-pc/net.mod	58196 bytes
old-debian12/boot/grub/i386-pc/morse.mod	2348 bytes
old-debian12/boot/grub/i386-pc/luks.mod	4356 bytes
old-debian12/boot/grub/i386-pc/hfspluscomp.mod	2988 bytes
old-debian12/boot/grub/i386-pc/password_pbkdf2.mod	2712 bytes
old-debian12/boot/grub/i386-pc/ext2.mod	6216 bytes
old-debian12/boot/grub/i386-pc/diskfilter.mod	9868 bytes
old-debian12/boot/grub/i386-pc/vbe.mod	9828 bytes
old-debian12/boot/grub/i386-pc/boot.img	512 bytes
old-debian12/boot/grub/i386-pc/setjmp_test.mod	1624 bytes
old-debian12/boot/grub/i386-pc/parttool.lst	17 bytes
old-debian12/boot/grub/i386-pc/afs.mod	6032 bytes
old-debian12/boot/grub/i386-pc/acpi.mod	10868 bytes
old-debian12/boot/grub/i386-pc/mdraid1x.mod	1852 bytes
old-debian12/boot/grub/i386-pc/memdisk.mod	2100 bytes
old-debian12/boot/grub/i386-pc/f2fs.mod	6640 bytes
old-debian12/boot/grub/i386-pc/mda_text.mod	2044 bytes
old-debian12/boot/grub/i386-pc/usbms.mod	6912 bytes
old-debian12/boot/grub/i386-pc/part_plan.mod	1732 bytes
old-debian12/boot/grub/i386-pc/sendkey.mod	7068 bytes
old-debian12/boot/grub/i386-pc/extcmd.mod	4672 bytes
old-debian12/boot/grub/i386-pc/part_bsd.mod	2680 bytes
old-debian12/boot/grub/i386-pc/gcry_rsa.mod	1968 bytes
old-debian12/boot/grub/i386-pc/videoinfo.mod	3892 bytes
old-debian12/boot/grub/i386-pc/pcidump.mod	2416 bytes
old-debian12/boot/grub/i386-pc/priority_queue.mod	1516 bytes
old-debian12/boot/grub/i386-pc/pci.mod	1316 bytes
old-debian12/boot/grub/i386-pc/eval.mod	1368 bytes
old-debian12/boot/grub/i386-pc/linux16.mod	5524 bytes
old-debian12/boot/grub/i386-pc/macho.mod	7500 bytes
old-debian12/boot/grub/i386-pc/gcry_crc.mod	10564 bytes
old-debian12/boot/grub/i386-pc/moddep.lst	5709 bytes
old-debian12/boot/grub/i386-pc/setjmp.mod	628 bytes
old-debian12/boot/grub/i386-pc/efiemu64.o	10120 bytes
old-debian12/boot/grub/i386-pc/videotest_checksum.mod	2284 bytes
old-debian12/boot/grub/i386-pc/keystatus.mod	1904 bytes
old-debian12/boot/grub/i386-pc/pbkdf2.mod	1312 bytes
old-debian12/boot/grub/i386-pc/file.mod	16932 bytes
old-debian12/boot/grub/i386-pc/bsd.mod	30672 bytes
old-debian12/boot/grub/i386-pc/luks2.mod	14376 bytes
old-debian12/boot/grub/i386-pc/gfxterm_background.mod	2796 bytes
old-debian12/boot/grub/i386-pc/lvm.mod	8544 bytes
old-debian12/boot/grub/i386-pc/xzio.mod	15460 bytes
old-debian12/boot/grub/i386-pc/partmap.lst	111 bytes
old-debian12/boot/grub/i386-pc/gfxmenu.mod	39136 bytes
old-debian12/boot/grub/i386-pc/msdospart.mod	2396 bytes
old-debian12/boot/grub/i386-pc/rdmsr.mod	1848 bytes
old-debian12/boot/grub/i386-pc/test_blockarg.mod	1272 bytes
old-debian12/boot/grub/i386-pc/random.mod	2784 bytes
old-debian12/boot/grub/i386-pc/cs5536.mod	3588 bytes
old-debian12/boot/grub/i386-pc/gcry_md4.mod	3048 bytes
old-debian12/boot/grub/i386-pc/ohci.mod	10420 bytes
old-debian12/boot/grub/i386-pc/terminal.mod	4448 bytes
old-debian12/boot/grub/i386-pc/lspci.mod	4828 bytes
old-debian12/boot/grub/i386-pc/tar.mod	3548 bytes
old-debian12/boot/grub/i386-pc/terminfo.mod	12356 bytes
old-debian12/boot/grub/i386-pc/usbtest.mod	3568 bytes
old-debian12/boot/grub/i386-pc/trig.mod	1668 bytes
old-debian12/boot/grub/i386-pc/videotest.mod	4216 bytes
old-debian12/boot/grub/i386-pc/gcry_rmd160.mod	8248 bytes
old-debian12/boot/grub/i386-pc/backtrace.mod	1576 bytes
old-debian12/boot/grub/i386-pc/cryptodisk.mod	12044 bytes
old-debian12/boot/grub/i386-pc/functional_test.mod	34168 bytes
old-debian12/boot/grub/i386-pc/legacycfg.mod	30132 bytes
old-debian12/boot/grub/i386-pc/part_dvh.mod	1424 bytes
old-debian12/boot/grub/i386-pc/hfsplus.mod	7860 bytes
old-debian12/boot/grub/i386-pc/aout.mod	956 bytes
old-debian12/boot/grub/i386-pc/at_keyboard.mod	4068 bytes
old-debian12/boot/grub/i386-pc/help.mod	2512 bytes
old-debian12/boot/grub/i386-pc/keylayouts.mod	5032 bytes
old-debian12/boot/grub/i386-pc/relocator.mod	14952 bytes
old-debian12/boot/grub/i386-pc/gcry_twofish.mod	36816 bytes
old-debian12/boot/grub/i386-pc/gptsync.mod	3740 bytes
old-debian12/boot/grub/i386-pc/usbserial_common.mod	1916 bytes
old-debian12/boot/grub/i386-pc/dm_nv.mod	1772 bytes
old-debian12/boot/grub/i386-pc/gcry_blowfish.mod	8000 bytes
old-debian12/boot/grub/i386-pc/loadenv.mod	5748 bytes
old-debian12/boot/grub/i386-pc/efiemu.mod	23696 bytes
old-debian12/boot/grub/i386-pc/bfs.mod	6740 bytes
old-debian12/boot/grub/i386-pc/div_test.mod	5560 bytes
old-debian12/boot/grub/i386-pc/ntldr.mod	2504 bytes
old-debian12/boot/grub/i386-pc/video_fb.mod	21016 bytes
old-debian12/boot/grub/i386-pc/mdraid09_be.mod	1968 bytes
old-debian12/boot/grub/i386-pc/loopback.mod	3240 bytes
old-debian12/boot/grub/i386-pc/command.lst	3887 bytes
old-debian12/boot/grub/i386-pc/search.mod	3624 bytes
old-debian12/boot/grub/i386-pc/truecrypt.mod	3728 bytes
old-debian12/boot/grub/i386-pc/gzio.mod	8788 bytes
old-debian12/boot/grub/i386-pc/parttool.mod	4644 bytes
old-debian12/boot/grub/i386-pc/font.mod	13520 bytes
old-debian12/boot/grub/i386-pc/usb_keyboard.mod	3764 bytes
old-debian12/boot/grub/i386-pc/cbtime.mod	2772 bytes
old-debian12/boot/grub/i386-pc/gcry_md5.mod	3668 bytes
old-debian12/boot/grub/i386-pc/part_acorn.mod	1584 bytes
old-debian12/boot/grub/i386-pc/iso9660.mod	8604 bytes
old-debian12/boot/grub/i386-pc/exfctest.mod	1380 bytes
old-debian12/boot/grub/i386-pc/ufs1_be.mod	5724 bytes
old-debian12/boot/grub/i386-pc/adler32.mod	1228 bytes
old-debian12/boot/grub/i386-pc/pata.mod	4812 bytes
old-debian12/boot/grub/i386-pc/915resolution.mod	7780 bytes
old-debian12/boot/grub/i386-pc/serial.mod	7696 bytes
old-debian12/boot/grub/i386-pc/video_cirrus.mod	6004 bytes
old-debian12/boot/grub/i386-pc/afsplitter.mod	1516 bytes
old-debian12/boot/grub/i386-pc/part_apple.mod	2052 bytes
old-debian12/boot/grub/i386-pc/geli.mod	5884 bytes
old-debian12/boot/grub/i386-pc/multiboot2.mod	15068 bytes
old-debian12/boot/grub/i386-pc/cmp_test.mod	4608 bytes
old-debian12/boot/grub/i386-pc/bufio.mod	2032 bytes
old-debian12/boot/grub/i386-pc/echo.mod	1896 bytes
old-debian12/boot/grub/i386-pc/regexp.mod	51032 bytes
old-debian12/boot/grub/i386-pc/minix2_be.mod	3868 bytes
old-debian12/boot/grub/i386-pc/legacy_password_test.mod	14404 bytes
old-debian12/boot/grub/i386-pc/verifiers.mod	2656 bytes
old-debian12/boot/grub/i386-pc/xnu_uuid.mod	2084 bytes
old-debian12/boot/grub/i386-pc/zfscrypt.mod	5488 bytes
old-debian12/boot/grub/i386-pc/zfs.mod	40672 bytes
old-debian12/boot/grub/i386-pc/sleep_test.mod	2260 bytes
old-debian12/boot/grub/i386-pc/datetime.mod	2232 bytes
old-debian12/boot/grub/i386-pc/elf.mod	4064 bytes
old-debian12/boot/grub/i386-pc/iorw.mod	2800 bytes
old-debian12/boot/grub/i386-pc/linux.mod	13172 bytes
old-debian12/boot/grub/i386-pc/chain.mod	3448 bytes
old-debian12/boot/grub/i386-pc/password.mod	1820 bytes
old-debian12/boot/grub/i386-pc/hashsum.mod	5168 bytes
old-debian12/boot/grub/i386-pc/ntfs.mod	10664 bytes
old-debian12/boot/grub/i386-pc/lsmmap.mod	1820 bytes
old-debian12/boot/grub/i386-pc/minix2.mod	3704 bytes
old-debian12/boot/grub/i386-pc/core.img	26945 bytes
old-debian12/boot/grub/i386-pc/progress.mod	2136 bytes
old-debian12/boot/grub/i386-pc/date.mod	2148 bytes
old-debian12/boot/grub/i386-pc/gcry_sha512.mod	8804 bytes
old-debian12/boot/grub/i386-pc/memrw.mod	2832 bytes
old-debian12/boot/grub/i386-pc/gfxterm_menu.mod	4912 bytes
old-debian12/boot/grub/i386-pc/bswap_test.mod	2252 bytes
old-debian12/boot/grub/i386-pc/ata.mod	5524 bytes
old-debian12/boot/grub/i386-pc/ls.mod	3856 bytes
old-debian12/boot/grub/i386-pc/gcry_camellia.mod	33516 bytes
old-debian12/boot/grub/i386-pc/tga.mod	4588 bytes
old-debian12/boot/grub/i386-pc/cat.mod	2884 bytes
old-debian12/boot/grub/i386-pc/boot.mod	2628 bytes
old-debian12/boot/grub/i386-pc/cmp.mod	2056 bytes
old-debian12/boot/grub/i386-pc/hello.mod	1140 bytes
old-debian12/boot/grub/i386-pc/pgp.mod	11468 bytes
old-debian12/boot/grub/i386-pc/part_sunpc.mod	1580 bytes
old-debian12/boot/grub/i386-pc/cmosdump.mod	1216 bytes
old-debian12/boot/grub/i386-pc/usbserial_usbdebug.mod	1460 bytes
old-debian12/boot/grub/i386-pc/hexdump.mod	3216 bytes
old-debian12/boot/grub/i386-pc/vga.mod	4932 bytes
old-debian12/boot/grub/i386-pc/zstd.mod	45868 bytes
old-debian12/boot/grub/i386-pc/hwmatch.mod	2468 bytes
old-debian12/boot/grub/i386-pc/gcry_sha256.mod	4376 bytes
old-debian12/boot/grub/i386-pc/drivemap.mod	5316 bytes
old-debian12/boot/grub/i386-pc/test.mod	5132 bytes
old-debian12/boot/grub/i386-pc/gcry_idea.mod	2884 bytes
old-debian12/boot/grub/i386-pc/newc.mod	3208 bytes
old-debian12/boot/grub/i386-pc/part_amiga.mod	1812 bytes
old-debian12/boot/grub/i386-pc/part_sun.mod	1452 bytes
old-debian12/boot/grub/i386-pc/reboot.mod	1636 bytes
old-debian12/boot/grub/i386-pc/all_video.mod	492 bytes
old-debian12/boot/grub/i386-pc/gettext.mod	4940 bytes
old-debian12/boot/grub/i386-pc/mdraid09.mod	2112 bytes
old-debian12/boot/grub/i386-pc/setpci.mod	5224 bytes
old-debian12/boot/grub/i386-pc/gcry_serpent.mod	17700 bytes
old-debian12/boot/grub/i386-pc/strtoull_test.mod	2112 bytes
old-debian12/boot/grub/i386-pc/disk.mod	2332 bytes
old-debian12/boot/grub/i386-pc/div.mod	956 bytes
old-debian12/boot/grub/i386-pc/testload.mod	2736 bytes
old-debian12/boot/grub/i386-pc/usbserial_pl2303.mod	2632 bytes
old-debian12/boot/grub/i386-pc/cmdline_cat_test.mod	2960 bytes
old-debian12/boot/grub/i386-pc/search_label.mod	3072 bytes
old-debian12/boot/grub/i386-pc/fs.lst	219 bytes
old-debian12/boot/grub/i386-pc/romfs.mod	4064 bytes
old-debian12/boot/grub/i386-pc/hdparm.mod	6560 bytes
old-debian12/boot/grub/i386-pc/gfxterm.mod	9892 bytes
old-debian12/boot/grub/i386-pc/biosdisk.mod	4636 bytes
old-debian12/boot/grub/i386-pc/plan9.mod	6292 bytes
old-debian12/boot/grub/i386-pc/crypto.lst	936 bytes
old-debian12/boot/grub/i386-pc/crc64.mod	1572 bytes
old-debian12/boot/grub/i386-pc/offsetio.mod	1460 bytes
old-debian12/boot/grub/i386-pc/multiboot.mod	13920 bytes
old-debian12/boot/grub/i386-pc/terminal.lst	202 bytes
old-debian12/boot/grub/i386-pc/minix3.mod	3704 bytes
old-debian12/boot/grub/i386-pc/ahci.mod	15392 bytes
old-debian12/boot/grub/i386-pc/ctz_test.mod	1680 bytes
old-debian12/boot/grub/i386-pc/true.mod	1152 bytes
old-debian12/boot/grub/i386-pc/minix.mod	3608 bytes
old-debian12/boot/grub/i386-pc/read.mod	1488 bytes
old-debian12/boot/grub/i386-pc/datehook.mod	1716 bytes
old-debian12/boot/grub/i386-pc/part_dfly.mod	1708 bytes
old-debian12/boot/grub/i386-pc/sleep.mod	2144 bytes
old-debian12/boot/grub/i386-pc/minix_be.mod	3768 bytes
old-debian12/boot/grub/i386-pc/wrmsr.mod	1448 bytes
old-debian12/boot/grub/i386-pc/part_gpt.mod	2292 bytes
old-debian12/boot/grub/i386-pc/btrfs.mod	20120 bytes
old-debian12/boot/grub/i386-pc/gcry_rfc2268.mod	2316 bytes
old-debian12/boot/grub/i386-pc/cbls.mod	3340 bytes
old-debian12/boot/grub/i386-pc/ufs1.mod	5340 bytes
old-debian12/boot/grub/i386-pc/probe.mod	3456 bytes
old-debian12/boot/grub/i386-pc/freedos.mod	2612 bytes
old-debian12/boot/grub/i386-pc/mmap.mod	8544 bytes
old-debian12/boot/grub/i386-pc/gdb.mod	25036 bytes
old-debian12/boot/grub/i386-pc/nilfs2.mod	6756 bytes
old-debian12/boot/grub/i386-pc/mpi.mod	27896 bytes
old-debian12/boot/grub/i386-pc/crypto.mod	4944 bytes
old-debian12/boot/grub/i386-pc/video_colors.mod	5568 bytes
old-debian12/boot/grub/i386-pc/halt.mod	4684 bytes
old-debian12/boot/grub/i386-pc/archelp.mod	2920 bytes
old-debian12/boot/grub/i386-pc/tftp.mod	5040 bytes
old-debian12/boot/grub/i386-pc/exfat.mod	6012 bytes
old-debian12/boot/grub/i386-pc/minicmd.mod	3568 bytes
old-debian12/boot/grub/i386-pc/jpeg.mod	7740 bytes
old-debian12/boot/grub/i386-pc/cpio.mod	2776 bytes
old-debian12/boot/grub/i386-pc/gcry_cast5.mod	16356 bytes
old-debian12/boot/grub/i386-pc/gcry_seed.mod	14824 bytes
old-debian12/boot/grub/i386-pc/modinfo.sh	2575 bytes
old-debian12/boot/grub/i386-pc/mul_test.mod	2016 bytes
old-debian12/boot/grub/i386-pc/usb.mod	10376 bytes
old-debian12/boot/grub/i386-pc/procfs.mod	2292 bytes
old-debian12/boot/grub/i386-pc/cmostest.mod	1808 bytes
old-debian12/boot/grub/i386-pc/http.mod	5700 bytes
old-debian12/boot/grub/i386-pc/shift_test.mod	2396 bytes
old-debian12/boot/grub/i386-pc/lsacpi.mod	4740 bytes
old-debian12/boot/grub/i386-pc/hfs.mod	6980 bytes
old-debian12/boot/grub/i386-pc/search_fs_uuid.mod	3156 bytes
old-debian12/boot/grub/i386-pc/udf.mod	8512 bytes
old-debian12/boot/grub/i386-pc/time.mod	1456 bytes
old-debian12/boot/grub/i386-pc/testspeed.mod	2264 bytes
old-debian12/boot/grub/i386-pc/zfsinfo.mod	6588 bytes
old-debian12/boot/grub/i386-pc/search_fs_file.mod	3052 bytes
old-debian12/boot/grub/i386-pc/xfs.mod	8264 bytes
old-debian12/boot/grub/i386-pc/gcry_des.mod	19104 bytes
old-debian12/boot/grub/i386-pc/blocklist.mod	1984 bytes
old-debian12/boot/grub/i386-pc/json.mod	3504 bytes
old-debian12/boot/grub/i386-pc/signature_test.mod	6380 bytes
old-debian12/boot/grub/i386-pc/lzopio.mod	4760 bytes
old-debian12/boot/grub/fonts/unicode.pf2	2392304 bytes
old-debian12/boot/grub/grubenv	1024 bytes
old-debian12/boot/grub/grub.cfg	7482 bytes
cloud-diff.txt	52454 bytes
live-rescue.txt	29453 bytes
interfaces-diff.txt	1098 bytes
oldroot-backup/system-info.txt	86 bytes
NetworkManager-diff.txt	0 bytes
file-list.txt	77824 bytes
run.log	211 bytes

./interfaces-diff.txt

diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/network/if-pre-up.d/ethtool /sda1/setups/network-report-20261020-010656/new-debian13/etc/network/if-pre-up.d/ethtool
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/network/if-pre-up.d/ethtool	2022-12-20 11:18:39.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/network/if-pre-up.d/ethtool	2025-08-23 19:10:25.000000000 +0000
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-ETHTOOL=/sbin/ethtool
+ETHTOOL=/usr/sbin/ethtool
 
 test -x $ETHTOOL || exit 0
 
diff -ruN /sda1/setups/network-report-20261020-010656/old-debian12/etc/network/if-up.d/ethtool /sda1/setups/network-report-20261020-010656/new-debian13/etc/network/if-up.d/ethtool
--- /sda1/setups/network-report-20261020-010656/old-debian12/etc/network/if-up.d/ethtool	2022-12-20 11:18:39.000000000 +0000
+++ /sda1/setups/network-report-20261020-010656/new-debian13/etc/network/if-up.d/ethtool	2025-08-23 19:10:25.000000000 +0000
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-ETHTOOL=/sbin/ethtool
+ETHTOOL=/usr/sbin/ethtool
 
 test -x $ETHTOOL || exit 0
 

./live-rescue.txt

2026-10-20T01:07:04+00:00
Linux rescue 6.1.0-43-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.162-1 (2026-02-08) x86_64 GNU/Linux
BOOT_IMAGE=/live/vmlinuz boot=live components noautologin hostname=rescue net.ifnames=0 console=tty1 console=ttyS0,115200n8 ip=frommedia toram contabo-rc=http://195.179.224.16/misc/cloudinit_rescue/update.sh initrd=/live/initrd.img

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 promiscuity 0  allmulti 0 minmtu 0 maxmtu 0 addrgenmode eui64 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 tso_max_size 524280 tso_max_segs 65535 gro_max_size 65536 
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
    link/ether 00:50:56:5e:95:7b brd ff:ff:ff:ff:ff:ff promiscuity 0  allmulti 0 minmtu 68 maxmtu 65535 addrgenmode eui64 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 tso_max_size 65536 tso_max_segs 65535 gro_max_size 65536 parentbus virtio parentdev virtio2 
    altname enp0s18
    altname ens18
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    altname enp0s18
    altname ens18
    inet 109.199.123.73/20 brd 109.199.127.255 scope global eth0
       valid_lft forever preferred_lft forever
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 state UNKNOWN qlen 1000
    inet6 ::1/128 scope host noprefixroute 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 state UP qlen 1000
    inet6 2a02:c207:2293:6396::1/64 scope global 
       valid_lft forever preferred_lft forever
    inet6 fe80::250:56ff:fe5e:957b/64 scope link 
       valid_lft forever preferred_lft forever
default via 109.199.112.1 dev eth0 onlink 
109.199.112.0/20 dev eth0 proto kernel scope link src 109.199.123.73 
local 109.199.123.73 dev eth0 table local proto kernel scope host src 109.199.123.73 
broadcast 109.199.127.255 dev eth0 table local proto kernel scope link src 109.199.123.73 
local 127.0.0.0/8 dev lo table local proto kernel scope host src 127.0.0.1 
local 127.0.0.1 dev lo table local proto kernel scope host src 127.0.0.1 
broadcast 127.255.255.255 dev lo table local proto kernel scope link src 127.0.0.1 
2a02:c207:2293:6396::/64 dev eth0 proto kernel metric 256 pref medium
fe80::/64 dev eth0 proto kernel metric 256 pref medium
default via fe80::1 dev eth0 metric 1024 onlink pref medium
local ::1 dev lo table local proto kernel metric 0 pref medium
local 2a02:c207:2293:6396::1 dev eth0 table local proto kernel metric 0 pref medium
local fe80::250:56ff:fe5e:957b dev eth0 table local proto kernel metric 0 pref medium
multicast ff00::/8 dev eth0 table local proto kernel metric 256 pref medium
0:	from all lookup local
32766:	from all lookup main
32767:	from all lookup default

# Managed by update.sh
nameserver 195.179.224.53
nameserver 209.126.15.53
nameserver 2a02:c202:5028::53
nameserver 2605:a140:5028::53

/sda1/setups/network-diagnostic.sh: line 130: lspci: command not found

Module                  Size  Used by
ext4                  983040  1
crc16                  16384  1 ext4
mbcache                16384  1 ext4
jbd2                  167936  1 ext4
crc32c_generic         16384  0
binfmt_misc            28672  1
intel_rapl_msr         20480  0
intel_rapl_common      32768  1 intel_rapl_msr
ghash_clmulni_intel    16384  0
sha512_ssse3           49152  0
sha512_generic         16384  1 sha512_ssse3
sha256_ssse3           32768  0
sha1_ssse3             32768  0
bochs                  16384  0
drm_vram_helper        20480  1 bochs
drm_ttm_helper         16384  2 bochs,drm_vram_helper
aesni_intel           393216  0
ttm                    94208  2 drm_vram_helper,drm_ttm_helper
crypto_simd            16384  1 aesni_intel
virtio_balloon         24576  0
cryptd                 28672  2 crypto_simd,ghash_clmulni_intel
pcspkr                 16384  0
drm_kms_helper        212992  4 bochs,drm_vram_helper
sg                     40960  0
evdev                  28672  2
joydev                 28672  0
serio_raw              20480  0
drm                   614400  6 drm_kms_helper,bochs,drm_vram_helper,drm_ttm_helper,ttm
fuse                  176128  3
efi_pstore             16384  0
dm_mod                184320  0
configfs               57344  1
qemu_fw_cfg            20480  0
ip_tables              36864  0
x_tables               61440  1 ip_tables
autofs4                53248  2
squashfs               73728  1
loop                   32768  2
overlay               163840  1
isofs                  53248  0
sd_mod                 65536  1
t10_pi                 16384  1 sd_mod
crc64_rocksoft         20480  1 t10_pi
crc64                  20480  1 crc64_rocksoft
crc_t10dif             20480  1 t10_pi
crct10dif_generic      16384  0
sr_mod                 28672  0
cdrom                  81920  2 isofs,sr_mod
virtio_net             73728  0
net_failover           24576  1 virtio_net
failover               16384  1 net_failover
ata_generic            16384  0
virtio_scsi            28672  1
crct10dif_pclmul       16384  1
uhci_hcd               57344  0
crct10dif_common       16384  3 crct10dif_generic,crc_t10dif,crct10dif_pclmul
ata_piix               45056  0
virtio_pci             24576  0
ehci_hcd              102400  0
virtio_pci_legacy_dev    16384  1 virtio_pci
crc32_pclmul           16384  0
libata                401408  2 ata_piix,ata_generic
crc32c_intel           24576  2
virtio_pci_modern_dev    20480  1 virtio_pci
psmouse               184320  0
virtio                 20480  4 virtio_balloon,virtio_scsi,virtio_pci,virtio_net
virtio_ring            45056  4 virtio_balloon,virtio_scsi,virtio_pci,virtio_net
i2c_piix4              28672  0
usbcore               348160  2 ehci_hcd,uhci_hcd
floppy                 86016  0
scsi_mod              286720  5 virtio_scsi,sd_mod,libata,sg,sr_mod
usb_common             16384  3 usbcore,ehci_hcd,uhci_hcd
scsi_common            16384  4 scsi_mod,libata,sg,sr_mod
button                 24576  0

NAME    FSTYPE     FSVER            LABEL                          UUID                                 FSAVAIL FSUSE% MOUNTPOINTS
loop0   squashfs   4.0                                                                                        0   100% /usr/lib/live/mount/rootfs/filesystem.squashfs
                                                                                                                       /run/live/rootfs/filesystem.squashfs
sda                                                                                                                    
├─sda1  ext4       1.0                                             f5b59259-3f9f-4129-bdf5-4503c42a19a8   25.3G    70% /sda1
├─sda2  zfs_member 5000             backup                         16288197709878219905                                
├─sda14                                                                                                                
└─sda15 vfat       FAT16                                           CD6E-EBF6                                           
sr0     iso9660    Joliet Extension Debian bookworm 20260220-09:54 2026-02-20-08-54-33-00                              
sr1     iso9660                     cidata                         2026-10-20-00-31-15-00                              

TARGET                                                  SOURCE                                                                FSTYPE      OPTIONS
/                                                       overlay                                                               overlay     rw,noatime,lowerdir=/run/live/rootfs/filesystem.squashfs/,upperdir=/run/live/overlay/rw,workdir=/run/live/overlay/work,redirect_dir=on
├─/sys                                                  sysfs                                                                 sysfs       rw,nosuid,nodev,noexec,relatime
│ ├─/sys/kernel/security                                securityfs                                                            securityfs  rw,nosuid,nodev,noexec,relatime
│ ├─/sys/fs/cgroup                                      cgroup2                                                               cgroup2     rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot
│ ├─/sys/fs/pstore                                      pstore                                                                pstore      rw,nosuid,nodev,noexec,relatime
│ ├─/sys/fs/bpf                                         bpf                                                                   bpf         rw,nosuid,nodev,noexec,relatime,mode=700
│ ├─/sys/kernel/debug                                   debugfs                                                               debugfs     rw,nosuid,nodev,noexec,relatime
│ ├─/sys/kernel/tracing                                 tracefs                                                               tracefs     rw,nosuid,nodev,noexec,relatime
│ ├─/sys/fs/fuse/connections                            fusectl                                                               fusectl     rw,nosuid,nodev,noexec,relatime
│ └─/sys/kernel/config                                  configfs                                                              configfs    rw,nosuid,nodev,noexec,relatime
├─/proc                                                 proc                                                                  proc        rw,nosuid,nodev,noexec,relatime
│ └─/proc/sys/fs/binfmt_misc                            systemd-1                                                             autofs      rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=450
│   └─/proc/sys/fs/binfmt_misc                          binfmt_misc                                                           binfmt_misc rw,nosuid,nodev,noexec,relatime
├─/dev                                                  udev                                                                  devtmpfs    rw,nosuid,relatime,size=9184904k,nr_inodes=2296226,mode=755,inode64
│ ├─/dev/pts                                            devpts                                                                devpts      rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000
│ ├─/dev/shm                                            tmpfs                                                                 tmpfs       rw,nosuid,nodev,inode64
│ ├─/dev/hugepages                                      hugetlbfs                                                             hugetlbfs   rw,relatime,pagesize=2M
│ └─/dev/mqueue                                         mqueue                                                                mqueue      rw,nosuid,nodev,noexec,relatime
├─/run                                                  tmpfs                                                                 tmpfs       rw,nosuid,nodev,noexec,relatime,size=1841584k,mode=755,inode64
│ ├─/run/live/rootfs/filesystem.squashfs                /dev/loop0                                                            squashfs    ro,noatime,errors=continue
│ ├─/run/live/medium                                    /dev/shm                                                              tmpfs       rw,relatime,size=627480k,inode64
│ ├─/run/live/overlay                                   tmpfs                                                                 tmpfs       rw,noatime,size=9207908k,mode=755,inode64
│ ├─/run/lock                                           tmpfs                                                                 tmpfs       rw,nosuid,nodev,noexec,relatime,size=5120k,inode64
│ ├─/run/credentials/systemd-sysusers.service           ramfs                                                                 ramfs       ro,nosuid,nodev,noexec,relatime,mode=700
│ ├─/run/credentials/systemd-sysctl.service             ramfs                                                                 ramfs       ro,nosuid,nodev,noexec,relatime,mode=700
│ ├─/run/credentials/systemd-tmpfiles-setup-dev.service ramfs                                                                 ramfs       ro,nosuid,nodev,noexec,relatime,mode=700
│ ├─/run/user/0                                         tmpfs                                                                 tmpfs       rw,nosuid,nodev,relatime,size=1841580k,nr_inodes=460395,mode=700,inode64
│ └─/run/credentials/systemd-tmpfiles-setup.service     ramfs                                                                 ramfs       ro,nosuid,nodev,noexec,relatime,mode=700
├─/usr/lib/live/mount                                   tmpfs[/live]                                                          tmpfs       rw,nosuid,nodev,noexec,relatime,size=1841584k,mode=755,inode64
│ ├─/usr/lib/live/mount/medium                          /dev/shm                                                              tmpfs       rw,relatime,size=627480k,inode64
│ ├─/usr/lib/live/mount/rootfs/filesystem.squashfs      /dev/loop0                                                            squashfs    ro,noatime,errors=continue
│ └─/usr/lib/live/mount/overlay                         tmpfs                                                                 tmpfs       rw,noatime,size=9207908k,mode=755,inode64
├─/tmp                                                  tmpfs                                                                 tmpfs       rw,nosuid,nodev,relatime,inode64
├─/sda1                                                 /dev/sda1                                                             ext4        rw,relatime
└─/oldsda1                                              backup.wikinam.org:/wikinam/online/wikinam/nextcloud.wikinam.org/root fuse.sshfs  rw,nosuid,nodev,relatime,user_id=0,group_id=0

  UNIT                                 LOAD      ACTIVE   SUB     DESCRIPTION
● apparmor.service                     not-found inactive dead    apparmor.service
  apt-daily-upgrade.service            loaded    inactive dead    Daily apt upgrade and clean activities
  apt-daily.service                    loaded    inactive dead    Daily apt download activities
● auditd.service                       not-found inactive dead    auditd.service
  blk-availability.service             loaded    active   exited  Availability of block devices
● chronyd.service                      not-found inactive dead    chronyd.service
  cloud-config.service                 loaded    active   exited  Apply the settings specified in cloud-config
  cloud-final.service                  loaded    active   exited  Execute cloud user/final scripts
  cloud-init-hotplugd.service          loaded    inactive dead    cloud-init hotplug hook daemon
  cloud-init-local.service             loaded    active   exited  Initial cloud-init job (pre-networking)
  cloud-init.service                   loaded    active   exited  Initial cloud-init job (metadata service crawler)
● connman.service                      not-found inactive dead    connman.service
  contabo-rc.service                   loaded    inactive dead    Fetch and execute Contabo RC script from kernel cmdline
  cron.service                         loaded    active   running Regular background program processing daemon
  dbus.service                         loaded    active   running D-Bus System Message Bus
● display-manager.service              not-found inactive dead    display-manager.service
  dm-event.service                     loaded    inactive dead    Device-mapper event daemon
  dpkg-db-backup.service               loaded    inactive dead    Daily dpkg database backup service
  e2scrub_all.service                  loaded    inactive dead    Online ext4 Metadata Check for All Filesystems
  e2scrub_reap.service                 loaded    inactive dead    Remove Stale Online ext4 Metadata Check Snapshots
  emergency.service                    loaded    inactive dead    Emergency Shell
● fcoe.service                         not-found inactive dead    fcoe.service
  fstrim.service                       loaded    inactive dead    Discard unused blocks on filesystems from /etc/fstab
  getty-static.service                 loaded    inactive dead    getty on tty2-tty6 if dbus and logind are not available
  getty@tty1.service                   loaded    active   running Getty on tty1
● hv_kvp_daemon.service                not-found inactive dead    hv_kvp_daemon.service
  ifupdown-pre.service                 loaded    active   exited  Helper to synchronize boot up for ifupdown
  initrd-cleanup.service               loaded    inactive dead    Cleaning Up and Shutting Down Daemons
  initrd-parse-etc.service             loaded    inactive dead    Mountpoints Configured in the Real Root
  initrd-switch-root.service           loaded    inactive dead    Switch Root
  initrd-udevadm-cleanup-db.service    loaded    inactive dead    Cleanup udev Database
● iscsi-shutdown.service               not-found inactive dead    iscsi-shutdown.service
● iscsi.service                        not-found inactive dead    iscsi.service
● iscsid.service                       not-found inactive dead    iscsid.service
  kmod-static-nodes.service            loaded    active   exited  Create List of Static Device Nodes
  live-config.service                  loaded    active   exited  live-config contains the components that configure a live system during the boot process (late userspace).
  live-tools.service                   loaded    inactive dead    live-tools - System Support Scripts
  logrotate.service                    loaded    inactive dead    Rotate log files
  lvm2-lvmpolld.service                loaded    inactive dead    LVM2 poll daemon
  lvm2-monitor.service                 loaded    active   exited  Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling
  man-db.service                       loaded    inactive dead    Daily man-db regeneration
  modprobe@configfs.service            loaded    inactive dead    Load Kernel Module configfs
  modprobe@dm_mod.service              loaded    inactive dead    Load Kernel Module dm_mod
  modprobe@drm.service                 loaded    inactive dead    Load Kernel Module drm
  modprobe@efi_pstore.service          loaded    inactive dead    Load Kernel Module efi_pstore
  modprobe@fuse.service                loaded    inactive dead    Load Kernel Module fuse
  modprobe@loop.service                loaded    inactive dead    Load Kernel Module loop
  networking.service                   loaded    active   exited  Raise network interfaces
● NetworkManager.service               not-found inactive dead    NetworkManager.service
● plymouth-quit-wait.service           not-found inactive dead    plymouth-quit-wait.service
● plymouth-start.service               not-found inactive dead    plymouth-start.service
● rbdmap.service                       not-found inactive dead    rbdmap.service
  rc-local.service                     loaded    inactive dead    /etc/rc.local Compatibility
  reboot-notifier.service              loaded    active   running reboot notifier API
  rescue.service                       loaded    inactive dead    Rescue Shell
  resolvconf.service                   loaded    active   exited  Nameserver information manager
  serial-getty@ttyS0.service           loaded    active   running Serial Getty on ttyS0
● snapd.seeded.service                 not-found inactive dead    snapd.seeded.service
  ssh.service                          loaded    active   running OpenBSD Secure Shell server
● sshd-keygen.service                  not-found inactive dead    sshd-keygen.service
● syslog.service                       not-found inactive dead    syslog.service
  systemd-ask-password-console.service loaded    inactive dead    Dispatch Password Requests to Console
  systemd-ask-password-wall.service    loaded    inactive dead    Forward Password Requests to Wall
  systemd-binfmt.service               loaded    active   exited  Set Up Additional Binary Formats
  systemd-firstboot.service            loaded    inactive dead    First Boot Wizard
  systemd-fsck-root.service            loaded    inactive dead    File System Check on Root Device
  systemd-fsckd.service                loaded    inactive dead    File System Check Daemon to report status
● systemd-hwdb-update.service          not-found inactive dead    systemd-hwdb-update.service
  systemd-initctl.service              loaded    inactive dead    initctl Compatibility Daemon
  systemd-journal-flush.service        loaded    active   exited  Flush Journal to Persistent Storage
  systemd-journald.service             loaded    active   running Journal Service
  systemd-logind.service               loaded    active   running User Login Management
  systemd-machine-id-commit.service    loaded    inactive dead    Commit a transient machine-id on disk
  systemd-modules-load.service         loaded    active   exited  Load Kernel Modules
  systemd-networkd-wait-online.service loaded    inactive dead    Wait for Network to be Configured
  systemd-networkd.service             loaded    inactive dead    Network Configuration
● systemd-oomd.service                 not-found inactive dead    systemd-oomd.service
  systemd-pcrphase-initrd.service      loaded    inactive dead    TPM2 PCR Barrier (initrd)
  systemd-pcrphase-sysinit.service     loaded    inactive dead    TPM2 PCR Barrier (Initialization)
  systemd-pcrphase.service             loaded    inactive dead    TPM2 PCR Barrier (User)
  systemd-pstore.service               loaded    inactive dead    Platform Persistent Storage Archival
  systemd-random-seed.service          loaded    active   exited  Load/Save Random Seed
  systemd-remount-fs.service           loaded    active   exited  Remount Root and Kernel File Systems
  systemd-repart.service               loaded    inactive dead    Repartition Root Disk
  systemd-sysctl.service               loaded    active   exited  Apply Kernel Variables
  systemd-sysext.service               loaded    inactive dead    Merge System Extension Images into /usr/ and /opt/
  systemd-sysusers.service             loaded    active   exited  Create System Users
  systemd-tmpfiles-clean.service       loaded    inactive dead    Cleanup of Temporary Directories
  systemd-tmpfiles-setup-dev.service   loaded    active   exited  Create Static Device Nodes in /dev
  systemd-tmpfiles-setup.service       loaded    active   exited  Create System Files and Directories
  systemd-udev-settle.service          loaded    inactive dead    Wait for udev To Complete Device Initialization
  systemd-udev-trigger.service         loaded    active   exited  Coldplug All udev Devices
  systemd-udevd.service                loaded    active   running Rule-based Manager for Device Events and Files
● systemd-update-done.service          not-found inactive dead    systemd-update-done.service
  systemd-update-utmp-runlevel.service loaded    inactive dead    Record Runlevel Change in UTMP
  systemd-update-utmp.service          loaded    active   exited  Record System Boot/Shutdown in UTMP
  systemd-user-sessions.service        loaded    active   exited  Permit User Sessions
● systemd-vconsole-setup.service       not-found inactive dead    systemd-vconsole-setup.service
  user-runtime-dir@0.service           loaded    active   exited  User Runtime Directory /run/user/0
  user@0.service                       loaded    active   running User Manager for UID 0

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.
100 loaded units listed.
To show all installed unit files use 'systemctl list-unit-files'.

Oct 20 00:31:39 localhost.localdomain kernel: sd 2:0:0:0: Power-on or device reset occurred
Oct 20 00:31:39 localhost.localdomain systemd[1]: Failed to open /dev/shm device, ignoring: Inappropriate ioctl for device
Oct 20 00:31:39 localhost.localdomain kernel: device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
Oct 20 00:31:39 localhost.localdomain systemd[1]: Failed to open /dev/shm device, ignoring: Inappropriate ioctl for device
Oct 20 00:31:39 localhost.localdomain systemd[1]: Failed to open /dev/shm device, ignoring: Inappropriate ioctl for device
Oct 20 00:31:39 localhost.localdomain systemd[1]: Failed to open /dev/shm device, ignoring: Inappropriate ioctl for device
Oct 20 00:31:39 localhost.localdomain systemd[1]: Failed to open /dev/shm device, ignoring: Inappropriate ioctl for device
Oct 20 00:31:39 localhost.localdomain systemd[1]: Failed to open /dev/shm device, ignoring: Inappropriate ioctl for device
Oct 20 00:31:40 localhost.localdomain systemd[1]: Failed to open /dev/shm device, ignoring: Inappropriate ioctl for device
Oct 20 00:31:40 rescue sudo[566]:     root : unknown user user ; PWD=/ ; USER=user ;
Oct 20 00:31:40 rescue sudo[593]:     root : unknown user user ; PWD=/ ; USER=user ;
Oct 20 00:31:40 rescue systemd[1]: Failed to open /dev/shm device, ignoring: Inappropriate ioctl for device
Oct 20 00:31:40 rescue systemd[1]: Failed to open /dev/shm device, ignoring: Inappropriate ioctl for device
Oct 20 00:31:43 rescue systemd[1]: Failed to open /dev/shm device, ignoring: Inappropriate ioctl for device
Oct 20 00:31:43 rescue systemd[1]: Failed to open /dev/shm device, ignoring: Inappropriate ioctl for device
Oct 20 00:32:51 rescue systemd[1]: Failed to open /dev/shm device, ignoring: Inappropriate ioctl for device
Oct 20 00:32:51 rescue systemd[1]: Failed to open /dev/shm device, ignoring: Inappropriate ioctl for device
Oct 20 00:41:15 rescue systemd[1]: Failed to open /dev/shm device, ignoring: Inappropriate ioctl for device
Oct 20 00:41:15 rescue systemd[2442]: Failed to open /dev/shm device, ignoring: Inappropriate ioctl for device
Oct 20 00:43:16 rescue systemd[2442]: Failed to open /dev/shm device, ignoring: Inappropriate ioctl for device
Oct 20 00:43:16 rescue systemd[1]: Failed to open /dev/shm device, ignoring: Inappropriate ioctl for device
Oct 20 00:46:42 rescue systemd[1]: Failed to open /dev/shm device, ignoring: Inappropriate ioctl for device
Oct 20 00:46:42 rescue systemd[2442]: Failed to open /dev/shm device, ignoring: Inappropriate ioctl for device
Oct 20 00:46:42 rescue systemd[2442]: Failed to open /dev/shm device, ignoring: Inappropriate ioctl for device
Oct 20 00:46:42 rescue systemd[1]: Failed to open /dev/shm device, ignoring: Inappropriate ioctl for device
Oct 20 00:53:18 rescue systemd[2442]: Failed to open /dev/shm device, ignoring: Inappropriate ioctl for device
Oct 20 00:53:18 rescue systemd[1]: Failed to open /dev/shm device, ignoring: Inappropriate ioctl for device
Oct 20 00:58:20 rescue sshd[2815]: error: kex_exchange_identification: Connection closed by remote host
Oct 20 01:00:59 rescue sshd[3022]: error: kex_exchange_identification: Connection closed by remote host
Oct 20 01:01:05 rescue sshd[3023]: error: kex_exchange_identification: read: Connection reset by peer
Oct 20 01:01:40 rescue sshd[3029]: error: kex_exchange_identification: Connection closed by remote host
Oct 20 01:04:47 rescue sshd[3266]: error: kex_exchange_identification: read: Connection reset by peer
Oct 20 01:05:50 rescue sshd[3282]: error: kex_protocol_error: type 20 seq 2 [preauth]
Oct 20 01:05:50 rescue sshd[3282]: error: kex_protocol_error: type 30 seq 3 [preauth]
Oct 20 01:05:52 rescue sshd[3282]: error: kex_protocol_error: type 20 seq 4 [preauth]
Oct 20 01:05:52 rescue sshd[3282]: error: kex_protocol_error: type 30 seq 5 [preauth]
Oct 20 01:05:54 rescue sshd[3282]: error: kex_protocol_error: type 20 seq 6 [preauth]
Oct 20 01:05:54 rescue sshd[3282]: error: kex_protocol_error: type 30 seq 7 [preauth]
Oct 20 01:06:13 rescue sshd[3285]: error: kex_protocol_error: type 20 seq 2 [preauth]
Oct 20 01:06:13 rescue sshd[3285]: error: kex_protocol_error: type 30 seq 3 [preauth]
Oct 20 01:06:17 rescue sshd[3285]: error: kex_protocol_error: type 20 seq 4 [preauth]
Oct 20 01:06:17 rescue sshd[3285]: error: kex_protocol_error: type 30 seq 5 [preauth]
Oct 20 01:06:19 rescue sshd[3285]: error: kex_protocol_error: type 20 seq 6 [preauth]
Oct 20 01:06:19 rescue sshd[3285]: error: kex_protocol_error: type 30 seq 7 [preauth]
Oct 20 01:06:50 rescue sshd[3288]: error: kex_protocol_error: type 20 seq 2 [preauth]
Oct 20 01:06:50 rescue sshd[3288]: error: kex_protocol_error: type 30 seq 3 [preauth]
Oct 20 01:06:51 rescue sshd[3288]: error: kex_protocol_error: type 20 seq 4 [preauth]
Oct 20 01:06:51 rescue sshd[3288]: error: kex_protocol_error: type 30 seq 5 [preauth]
Oct 20 01:06:53 rescue sshd[3288]: error: kex_protocol_error: type 20 seq 6 [preauth]
Oct 20 01:06:53 rescue sshd[3288]: error: kex_protocol_error: type 30 seq 7 [preauth]

./new-debian13/boot/grub/grub.cfg

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

serial --speed=115200
if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1  f5b59259-3f9f-4129-bdf5-4503c42a19a8
else
  search --no-floppy --fs-uuid --set=root f5b59259-3f9f-4129-bdf5-4503c42a19a8
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
fi
terminal_output gfxterm serial
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=0
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=cyan/blue
set menu_color_highlight=white/blue
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
}
set linux_gfx_mode=
export linux_gfx_mode
menuentry 'Debian GNU/Linux' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-f5b59259-3f9f-4129-bdf5-4503c42a19a8' {
	load_video
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1  f5b59259-3f9f-4129-bdf5-4503c42a19a8
	else
	  search --no-floppy --fs-uuid --set=root f5b59259-3f9f-4129-bdf5-4503c42a19a8
	fi
	echo	'Loading Linux 6.12.113+deb13-cloud-amd64 ...'
	linux	/boot/vmlinuz-6.12.113+deb13-cloud-amd64 root=PARTUUID=ee829b50-dbb1-4461-a46b-5fc08bfe425d ro console=tty0 console=ttyS0,115200 earlyprintk=ttyS0,115200 consoleblank=0 
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initrd.img-6.12.113+deb13-cloud-amd64
}
submenu 'Advanced options for Debian GNU/Linux' $menuentry_id_option 'gnulinux-advanced-f5b59259-3f9f-4129-bdf5-4503c42a19a8' {
	menuentry 'Debian GNU/Linux, with Linux 6.12.113+deb13-cloud-amd64' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-6.12.113+deb13-cloud-amd64-advanced-f5b59259-3f9f-4129-bdf5-4503c42a19a8' {
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1  f5b59259-3f9f-4129-bdf5-4503c42a19a8
		else
		  search --no-floppy --fs-uuid --set=root f5b59259-3f9f-4129-bdf5-4503c42a19a8
		fi
		echo	'Loading Linux 6.12.113+deb13-cloud-amd64 ...'
		linux	/boot/vmlinuz-6.12.113+deb13-cloud-amd64 root=PARTUUID=ee829b50-dbb1-4461-a46b-5fc08bfe425d ro console=tty0 console=ttyS0,115200 earlyprintk=ttyS0,115200 consoleblank=0 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-6.12.113+deb13-cloud-amd64
	}
	menuentry 'Debian GNU/Linux, with Linux 6.12.113+deb13-cloud-amd64 (recovery mode)' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-6.12.113+deb13-cloud-amd64-recovery-f5b59259-3f9f-4129-bdf5-4503c42a19a8' {
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1  f5b59259-3f9f-4129-bdf5-4503c42a19a8
		else
		  search --no-floppy --fs-uuid --set=root f5b59259-3f9f-4129-bdf5-4503c42a19a8
		fi
		echo	'Loading Linux 6.12.113+deb13-cloud-amd64 ...'
		linux	/boot/vmlinuz-6.12.113+deb13-cloud-amd64 root=PARTUUID=ee829b50-dbb1-4461-a46b-5fc08bfe425d ro single console=tty0 console=ttyS0,115200 earlyprintk=ttyS0,115200 consoleblank=0
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-6.12.113+deb13-cloud-amd64
	}
	menuentry 'Debian GNU/Linux, with Linux 6.12.113+deb13-amd64' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-6.12.113+deb13-amd64-advanced-f5b59259-3f9f-4129-bdf5-4503c42a19a8' {
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1  f5b59259-3f9f-4129-bdf5-4503c42a19a8
		else
		  search --no-floppy --fs-uuid --set=root f5b59259-3f9f-4129-bdf5-4503c42a19a8
		fi
		echo	'Loading Linux 6.12.113+deb13-amd64 ...'
		linux	/boot/vmlinuz-6.12.113+deb13-amd64 root=PARTUUID=ee829b50-dbb1-4461-a46b-5fc08bfe425d ro console=tty0 console=ttyS0,115200 earlyprintk=ttyS0,115200 consoleblank=0 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-6.12.113+deb13-amd64
	}
	menuentry 'Debian GNU/Linux, with Linux 6.12.113+deb13-amd64 (recovery mode)' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-6.12.113+deb13-amd64-recovery-f5b59259-3f9f-4129-bdf5-4503c42a19a8' {
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1  f5b59259-3f9f-4129-bdf5-4503c42a19a8
		else
		  search --no-floppy --fs-uuid --set=root f5b59259-3f9f-4129-bdf5-4503c42a19a8
		fi
		echo	'Loading Linux 6.12.113+deb13-amd64 ...'
		linux	/boot/vmlinuz-6.12.113+deb13-amd64 root=PARTUUID=ee829b50-dbb1-4461-a46b-5fc08bfe425d ro single console=tty0 console=ttyS0,115200 earlyprintk=ttyS0,115200 consoleblank=0
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-6.12.113+deb13-amd64
	}
	menuentry 'Debian GNU/Linux, with Linux 6.1.0-54-cloud-amd64' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-6.1.0-54-cloud-amd64-advanced-f5b59259-3f9f-4129-bdf5-4503c42a19a8' {
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1  f5b59259-3f9f-4129-bdf5-4503c42a19a8
		else
		  search --no-floppy --fs-uuid --set=root f5b59259-3f9f-4129-bdf5-4503c42a19a8
		fi
		echo	'Loading Linux 6.1.0-54-cloud-amd64 ...'
		linux	/boot/vmlinuz-6.1.0-54-cloud-amd64 root=PARTUUID=ee829b50-dbb1-4461-a46b-5fc08bfe425d ro console=tty0 console=ttyS0,115200 earlyprintk=ttyS0,115200 consoleblank=0 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-6.1.0-54-cloud-amd64
	}
	menuentry 'Debian GNU/Linux, with Linux 6.1.0-54-cloud-amd64 (recovery mode)' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-6.1.0-54-cloud-amd64-recovery-f5b59259-3f9f-4129-bdf5-4503c42a19a8' {
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1  f5b59259-3f9f-4129-bdf5-4503c42a19a8
		else
		  search --no-floppy --fs-uuid --set=root f5b59259-3f9f-4129-bdf5-4503c42a19a8
		fi
		echo	'Loading Linux 6.1.0-54-cloud-amd64 ...'
		linux	/boot/vmlinuz-6.1.0-54-cloud-amd64 root=PARTUUID=ee829b50-dbb1-4461-a46b-5fc08bfe425d ro single console=tty0 console=ttyS0,115200 earlyprintk=ttyS0,115200 consoleblank=0
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-6.1.0-54-cloud-amd64
	}
	menuentry 'Debian GNU/Linux, with Linux 6.1.0-52-cloud-amd64' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-6.1.0-52-cloud-amd64-advanced-f5b59259-3f9f-4129-bdf5-4503c42a19a8' {
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1  f5b59259-3f9f-4129-bdf5-4503c42a19a8
		else
		  search --no-floppy --fs-uuid --set=root f5b59259-3f9f-4129-bdf5-4503c42a19a8
		fi
		echo	'Loading Linux 6.1.0-52-cloud-amd64 ...'
		linux	/boot/vmlinuz-6.1.0-52-cloud-amd64 root=PARTUUID=ee829b50-dbb1-4461-a46b-5fc08bfe425d ro console=tty0 console=ttyS0,115200 earlyprintk=ttyS0,115200 consoleblank=0 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-6.1.0-52-cloud-amd64
	}
	menuentry 'Debian GNU/Linux, with Linux 6.1.0-52-cloud-amd64 (recovery mode)' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-6.1.0-52-cloud-amd64-recovery-f5b59259-3f9f-4129-bdf5-4503c42a19a8' {
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1  f5b59259-3f9f-4129-bdf5-4503c42a19a8
		else
		  search --no-floppy --fs-uuid --set=root f5b59259-3f9f-4129-bdf5-4503c42a19a8
		fi
		echo	'Loading Linux 6.1.0-52-cloud-amd64 ...'
		linux	/boot/vmlinuz-6.1.0-52-cloud-amd64 root=PARTUUID=ee829b50-dbb1-4461-a46b-5fc08bfe425d ro single console=tty0 console=ttyS0,115200 earlyprintk=ttyS0,115200 consoleblank=0
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-6.1.0-52-cloud-amd64
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg
fi
### END /etc/grub.d/41_custom ###

./new-debian13/boot/grub/grubenv

# GRUB Environment Block
# WARNING: Do not edit this file by tools other than grub-editenv!!!
##################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################

./new-debian13/boot/grub/i386-pc/command.lst

*acpi: acpi
*all_functional_test: functional_test
*background_image: gfxterm_background
*cat: cat
*cmp: cmp
*cpuid: cpuid
*crc: hashsum
*cryptomount: cryptodisk
*drivemap: drivemap
*echo: echo
*extract_syslinux_entries_configfile: syslinuxcfg
*extract_syslinux_entries_source: syslinuxcfg
*file: file
*functional_test: functional_test
*gettext: gettext
*halt: halt
*hashsum: hashsum
*hdparm: hdparm
*hello: hello
*help: help
*hexdump: hexdump
*inb: iorw
*inl: iorw
*inw: iorw
*keystatus: keystatus
*kfreebsd: bsd
*knetbsd: bsd
*kopenbsd: bsd
*list_env: loadenv
*load_env: loadenv
*loopback: loopback
*ls: ls
*lsacpi: lsacpi
*lspci: lspci
*md5sum: hashsum
*menuentry: normal
*pcidump: pcidump
*plainmount: plainmount
*plan9: plan9
*probe: probe
*rdmsr: rdmsr
*read: read
*read_byte: memrw
*read_dword: memrw
*read_word: memrw
*regexp: regexp
*save_env: loadenv
*search: search
*sendkey: sendkey
*serial: serial
*setpci: setpci
*sha1sum: hashsum
*sha256sum: hashsum
*sha512sum: hashsum
*sleep: sleep
*smbios: smbios
*submenu: normal
*syslinux_configfile: syslinuxcfg
*syslinux_source: syslinuxcfg
*terminfo: terminfo
*test_blockarg: test_blockarg
*testspeed: testspeed
*tr: tr
*trust: pgp
*verify_detached: pgp
*xnu_splash: xnu
*zfskey: zfscrypt
.: configfile
915resolution: 915resolution
[: test
authenticate: normal
background_color: gfxterm_background
backtrace: backtrace
badram: mmap
blocklist: blocklist
boot: boot
break: normal
cat: minicmd
cbmemc: cbmemc
chainloader: chain
clear: normal
cmosclean: cmostest
cmosdump: cmosdump
cmosset: cmostest
cmostest: cmostest
configfile: configfile
continue: normal
coreboot_boottime: cbtime
cutmem: mmap
date: date
distrust: pgp
dump: minicmd
efiemu_loadcore: efiemu
efiemu_prepare: efiemu
efiemu_unload: efiemu
eval: eval
exit: minicmd
export: normal
extract_entries_configfile: configfile
extract_entries_source: configfile
extract_legacy_entries_configfile: legacycfg
extract_legacy_entries_source: legacycfg
false: true
freedos: freedos
gdbstub: gdb
gdbstub_break: gdb
gdbstub_stop: gdb
gptsync: gptsync
help: minicmd
hexdump_random: random
hwmatch: hwmatch
initrd16: linux16
initrd: linux
keymap: keylayouts
kfreebsd_loadenv: bsd
kfreebsd_module: bsd
kfreebsd_module_elf: bsd
knetbsd_module: bsd
knetbsd_module_elf: bsd
kopenbsd_ramdisk: bsd
legacy_check_password: legacycfg
legacy_configfile: legacycfg
legacy_initrd: legacycfg
legacy_initrd_nounzip: legacycfg
legacy_kernel: legacycfg
legacy_password: legacycfg
legacy_source: legacycfg
linux16: linux16
linux: linux
list_trusted: pgp
loadfont: font
lsapm: lsapm
lscoreboot: cbls
lsfonts: font
lsmmap: lsmmap
lsmod: minicmd
macppcbless: macbless
mactelbless: macbless
module2: multiboot2
module: multiboot
multiboot2: multiboot2
multiboot: multiboot
nativedisk: nativedisk
net_add_addr: net
net_add_dns: net
net_add_route: net
net_bootp6: net
net_bootp: net
net_del_addr: net
net_del_dns: net
net_del_route: net
net_dhcp: net
net_get_dhcp_option: net
net_ipv6_autoconf: net
net_ls_addr: net
net_ls_cards: net
net_ls_dns: net
net_ls_routes: net
net_nslookup: net
net_set_vlan: net
normal: normal
normal_exit: normal
ntldr: ntldr
outb: iorw
outl: iorw
outw: iorw
parttool: parttool
password: password
password_pbkdf2: password_pbkdf2
play: play
pxechainloader: pxechain
reboot: reboot
return: normal
rmmod: minicmd
search.file: search_fs_file
search.fs_label: search_label
search.fs_uuid: search_fs_uuid
setparams: normal
shift: normal
source: configfile
terminal_input: terminal
terminal_output: terminal
test: test
testload: testload
time: time
true: true
truecrypt: truecrypt
usb: usbtest
vbeinfo: videoinfo
vbetest: videotest
videoinfo: videoinfo
videotest: videotest
write_byte: memrw
write_dword: memrw
write_word: memrw
wrmsr: wrmsr
xnu_devprop_load: xnu
xnu_kernel64: xnu
xnu_kernel: xnu
xnu_kext: xnu
xnu_kextdir: xnu
xnu_mkext: xnu
xnu_ramdisk: xnu
xnu_resume: xnu
xnu_uuid: xnu_uuid
zfs-bootfs: zfsinfo
zfsinfo: zfsinfo

./new-debian13/boot/grub/i386-pc/crypto.lst

RIJNDAEL: gcry_rijndael
RIJNDAEL192: gcry_rijndael
RIJNDAEL256: gcry_rijndael
AES128: gcry_rijndael
AES-128: gcry_rijndael
AES-192: gcry_rijndael
AES-256: gcry_rijndael
ADLER32: adler32
CRC64: crc64
ARCFOUR: gcry_arcfour
BLOWFISH: gcry_blowfish
CAMELLIA128: gcry_camellia
CAMELLIA192: gcry_camellia
CAMELLIA256: gcry_camellia
CAST5: gcry_cast5
CRC32: gcry_crc
CRC32RFC1510: gcry_crc
CRC24RFC2440: gcry_crc
DES: gcry_des
3DES: gcry_des
DSA: gcry_dsa
IDEA: gcry_idea
MD4: gcry_md4
MD5: gcry_md5
RFC2268_40: gcry_rfc2268
AES: gcry_rijndael
AES192: gcry_rijndael
AES256: gcry_rijndael
RIPEMD160: gcry_rmd160
RSA: gcry_rsa
SEED: gcry_seed
SERPENT128: gcry_serpent
SERPENT192: gcry_serpent
SERPENT256: gcry_serpent
SHA1: gcry_sha1
SHA224: gcry_sha256
SHA256: gcry_sha256
SHA512: gcry_sha512
SHA384: gcry_sha512
TIGER192: gcry_tiger
TIGER: gcry_tiger
TIGER2: gcry_tiger
TWOFISH: gcry_twofish
TWOFISH128: gcry_twofish
WHIRLPOOL: gcry_whirlpool

./new-debian13/boot/grub/i386-pc/fs.lst

affs
afs
bfs
btrfs
cbfs
cpio
cpio_be
exfat
ext2
f2fs
fat
hfs
hfsplus
iso9660
jfs
minix
minix2
minix2_be
minix3
minix3_be
minix_be
newc
nilfs2
ntfs
odc
procfs
reiserfs
romfs
sfs
squash4
tar
udf
ufs1
ufs1_be
ufs2
xfs
zfs

./new-debian13/boot/grub/i386-pc/moddep.lst

videotest: font gfxmenu video
odc: archelp
loopback: extcmd
macho:
gcry_des: crypto
memrw: extcmd
terminfo: extcmd
f2fs: fshelp
part_gpt:
romfs: fshelp
read: extcmd
aout:
gcry_arcfour: crypto
vga_text:
tftp: net
newc: archelp
minix2_be:
afsplitter: crypto
elf:
videotest_checksum: font functional_test video_fb
password_pbkdf2: crypto gcry_sha512 normal pbkdf2
gcry_seed: crypto
pcidump: extcmd pci
bsd: aout boot cpuid crypto elf extcmd gcry_md5 mmap relocator serial vbe verifiers video
sfs: fshelp
reiserfs: fshelp
part_sunpc:
zstd:
gfxmenu: bitmap bitmap_scale font gfxterm normal trig video video_colors
915resolution:
backtrace:
jfs:
help: extcmd normal
configfile: normal
cbls: cbtable
gfxterm_menu: font functional_test normal procfs video_fb
gcry_idea: crypto
tr: extcmd
shift_test: functional_test
ohci: boot cs5536 pci usb
afs: fshelp
spkmodem: terminfo
usb_keyboard: keylayouts usb
xzio: crypto
syslinuxcfg: extcmd normal
search_fs_file:
wrmsr:
vga: video video_fb
usbms: scsi usb
test_blockarg: extcmd normal
true:
affs: fshelp
iso9660: fshelp
exfat: fshelp
smbios: acpi extcmd
setjmp_test: functional_test setjmp
gfxterm: font video
disk:
xfs: fshelp
testspeed: extcmd normal
cpio_be: archelp
functional_test: btrfs extcmd video video_fb
pxechain: boot pxe relocator video
bswap_test: functional_test
sleep: extcmd normal
memdisk:
gcry_rijndael: crypto
mdraid09_be: diskfilter
gettext:
gcry_sha1: crypto
hfspluscomp: gzio hfsplus
cmp: extcmd
random: acpi hexdump
offsetio:
file: elf extcmd macho offsetio
usbserial_usbdebug: serial usb usbserial_common
video_colors:
morse:
hashsum: crypto extcmd normal
usb: pci
halt: acpi extcmd
gdb: backtrace serial
gfxterm_background: bitmap bitmap_scale extcmd gfxterm video video_colors
search_fs_uuid:
gcry_dsa: mpi pgp
keystatus: extcmd
linux: boot mmap normal relocator vbe verifiers video
geli: crypto cryptodisk gcry_sha256 gcry_sha512 pbkdf2
cmdline_cat_test: font functional_test normal procfs video_fb
rdmsr: extcmd
part_sun:
cbtable:
plan9: boot extcmd relocator verifiers video
sendkey: boot extcmd
pbkdf2_test: functional_test gcry_sha1 pbkdf2
video_bochs: pci video video_fb
verifiers:
bufio:
usbserial_ftdi: serial usb usbserial_common
legacy_password_test: functional_test legacycfg
cpuid: extcmd
hwmatch: normal pci regexp
hdparm: extcmd hexdump
bfs: fshelp
gcry_blowfish: crypto
test:
nilfs2: fshelp
gcry_rsa: mpi pgp
cryptodisk: crypto extcmd procfs
nativedisk:
minicmd:
signature_test: functional_test procfs
ata: scsi
udf: fshelp
gzio: gcry_crc
xnu_uuid: gcry_md5
uhci: pci usb
pata: ata pci
mul_test: functional_test
adler32: crypto
terminal:
div:
ehci: boot cs5536 pci usb
crypto:
part_bsd: part_msdos
luks2: afsplitter crypto cryptodisk json pbkdf2
cs5536: pci
biosdisk:
lsapm:
gcry_sha512: crypto
password: crypto normal
efiemu: acpi cpuid crypto gcry_crc smbios
fshelp:
sleep_test: datetime functional_test
iorw: extcmd
bli: part_gpt
xnu: bitmap bitmap_scale boot efiemu extcmd macho mmap random relocator verifiers video
mmap: boot
exfctest: functional_test
zfsinfo: zfs
ldm: diskfilter part_gpt part_msdos
cmostest:
eval: normal
part_dvh:
ext2: fshelp
blocklist:
net: boot bufio datetime priority_queue
drivemap: boot extcmd mmap
part_acorn:
videoinfo: video
btrfs: gzio lzopio raid6rec zstd
lsmmap:
strtoull_test: functional_test
bitmap:
vbe: video video_fb
ntfs: fshelp
multiboot: boot elf linux lsapm mmap net relocator vbe video
gcry_crc: crypto
png: bitmap bufio
json:
jpeg: bitmap bufio
macbless: disk
div_test: div functional_test
regexp: extcmd normal
parttool: normal
usbserial_pl2303: serial usb usbserial_common
cpio: archelp
gcry_rmd160: crypto
fat: fshelp
ufs1_be:
truecrypt: boot gzio mmap relocator video
archelp:
ntldr: boot chain relocator video
http: net
zfs: gzio
raid6rec: diskfilter
minix2:
mda_text:
lsacpi: acpi extcmd
datehook: datetime
loadenv: disk extcmd
bitmap_scale: bitmap
probe: extcmd
minix3:
tar: archelp
hfs: fshelp
procfs: archelp
boot:
keylayouts:
progress: normal
kernel:
usbtest: usb
relocator: mmap
acpi: extcmd mmap
tga: bitmap bufio
reboot: relocator
serial: acpi extcmd pci terminfo
zfscrypt: crypto extcmd gcry_rijndael gcry_sha1 pbkdf2 zfs
dm_nv: diskfilter
cmp_test: functional_test
luks: afsplitter crypto cryptodisk pbkdf2
font: bufio video
raid5rec: diskfilter
crc64: crypto
datetime:
ctz_test: functional_test
video:
pci:
cbmemc: cbtable normal terminfo
cmosdump:
hfsplus: fshelp
gcry_cast5: crypto
extcmd:
squash4: fshelp gzio lzopio xzio
part_plan:
minix_be:
gcry_whirlpool: crypto
pxe: boot net
gcry_tiger: crypto
search: extcmd search_fs_file search_fs_uuid search_label
lspci: extcmd pci
cbtime: cbtable
video_fb:
minix3_be:
trig:
msdospart: disk parttool
priority_queue:
gcry_twofish: crypto
plainmount: crypto cryptodisk extcmd
part_dfly:
xnu_uuid_test: functional_test
diskfilter:
testload:
part_apple:
hexdump: extcmd
date: datetime
pbkdf2: crypto
gcry_sha256: crypto
ls: datetime extcmd normal
usbserial_common: serial usb
ntfscomp: ntfs
lzopio: crypto
video_cirrus: pci video video_fb
hello: extcmd
scsi:
linux16: boot linux mmap relocator video
cat: extcmd
ahci: ata boot pci
pgp: crypto extcmd gcry_sha1 mpi verifiers
normal: boot bufio crypto datetime extcmd gettext net terminal verifiers
ufs1:
mdraid09: diskfilter
lvm: diskfilter
cbfs: archelp
chain: boot relocator video
ufs2:
time:
setpci: extcmd pci
gptsync: disk
freedos: boot chain relocator video
search_label:
setjmp:
multiboot2: acpi boot elf linux lsapm mmap net relocator vbe video
gcry_rfc2268: crypto
mdraid1x: diskfilter
mpi: crypto
legacycfg: crypto gcry_md5 linux normal password
play:
part_amiga:
minix:
echo: extcmd
gcry_serpent: crypto
gcry_md4: crypto
gcry_md5: crypto
part_msdos:
gcry_camellia: crypto
at_keyboard: boot keylayouts
all_video: vbe vga video_bochs video_cirrus

./new-debian13/boot/grub/i386-pc/modinfo.sh

#!/bin/bash

# User-controllable options
grub_modinfo_target_cpu=i386
grub_modinfo_platform=pc
grub_disk_cache_stats=0
grub_boot_time_stats=0
grub_have_font_source=1

# Autodetected config
grub_have_asm_uscore=0
grub_bss_start_symbol="__bss_start"
grub_end_symbol="end"

# Build environment
grub_target_cc='cc'
grub_target_cc_version='cc (Debian 14.2.0-19) 14.2.0'
grub_target_cflags='-std=gnu99 -fno-common -Os -m32 -Wall -W -Wshadow -Wpointer-arith -Wundef -Wchar-subscripts -Wcomment -Wdeprecated-declarations -Wdisabled-optimization -Wdiv-by-zero -Wfloat-equal -Wformat-extra-args -Wformat-security -Wformat-y2k -Wimplicit -Wimplicit-function-declaration -Wimplicit-int -Wmain -Wmissing-braces -Wmissing-format-attribute -Wmultichar -Wparentheses -Wreturn-type -Wsequence-point -Wshadow -Wsign-compare -Wswitch -Wtrigraphs -Wunknown-pragmas -Wunused -Wunused-function -Wunused-label -Wunused-parameter -Wunused-value  -Wunused-variable -Wwrite-strings -Wnested-externs -Wstrict-prototypes -g -Wredundant-decls -Wmissing-prototypes -Wmissing-declarations  -Wextra -Wattributes -Wendif-labels -Winit-self -Wint-to-pointer-cast -Winvalid-pch -Wmissing-field-initializers -Wnonnull -Woverflow -Wvla -Wpointer-to-int-cast -Wstrict-aliasing -Wvariadic-macros -Wvolatile-register-var -Wpointer-sign -Wmissing-include-dirs -Wmissing-prototypes -Wmissing-declarations -Wformat=2 -march=i386 -mrtd -mregparm=3 -falign-functions=1 -falign-loops=1 -falign-jumps=1 -freg-struct-return -mno-mmx -mno-sse -mno-sse2 -mno-sse3 -mno-3dnow -Wa,-mx86-used-note=no -msoft-float -fno-omit-frame-pointer -fno-dwarf2-cfi-asm -mno-stack-arg-probe -fno-asynchronous-unwind-tables -fno-unwind-tables -fno-ident -fno-PIE -fno-pie -fno-stack-protector -Wtrampolines -Werror'
grub_target_cppflags='-Wno-unused-but-set-variable -Wall -W  -DGRUB_MACHINE_PCBIOS=1 -DGRUB_MACHINE=I386_PC -m32 -nostdinc -isystem /usr/lib/gcc/x86_64-linux-gnu/14/include -I$(top_srcdir)/include -I$(top_builddir)/include'
grub_target_ccasflags=' -m32 -g  -Wa,-mx86-used-note=no -msoft-float -fno-PIE -fno-pie'
grub_target_ldflags='-no-pie -m32 -Wl,-melf_i386 -no-pie -Wl,--build-id=none'
grub_cflags=''
grub_cppflags=' -D_FILE_OFFSET_BITS=64'
grub_ccasflags=''
grub_ldflags=''
grub_target_strip='strip'
grub_target_nm='nm'
grub_target_ranlib='ranlib'
grub_target_objconf=''
grub_target_obj2elf=''
grub_target_img_base_ldopt='-Wl,-Ttext'
grub_target_img_ldflags='@TARGET_IMG_BASE_LDFLAGS@'

# Version
grub_version="2.12"
grub_package="grub"
grub_package_string="GRUB 2.12-9+deb13u2"
grub_package_version="2.12-9+deb13u2"
grub_package_name="GRUB"
grub_package_bugreport="bug-grub@gnu.org"

./new-debian13/boot/grub/i386-pc/partmap.lst

part_acorn
part_amiga
part_apple
part_bsd
part_dfly
part_dvh
part_gpt
part_msdos
part_plan
part_sun
part_sunpc

./new-debian13/boot/grub/i386-pc/parttool.lst

msdos: msdospart

./new-debian13/boot/grub/i386-pc/terminal.lst

iat_keyboard: at_keyboard
iserial: serial
iserial_*: serial
oaudio: morse
ocbmemc: cbmemc
ogfxterm: gfxterm
omda_text: mda_text
oserial: serial
oserial_*: serial
ospkmodem: spkmodem
ovga_text: vga_text

./new-debian13/boot/grub/i386-pc/video.lst

vbe
vga
video_bochs
video_cirrus

./new-debian13/boot/grub/x86_64-efi/command.lst

*acpi: acpi
*all_functional_test: functional_test
*background_image: gfxterm_background
*cat: cat
*cmp: cmp
*cpuid: cpuid
*crc: hashsum
*cryptomount: cryptodisk
*echo: echo
*extract_syslinux_entries_configfile: syslinuxcfg
*extract_syslinux_entries_source: syslinuxcfg
*file: file
*functional_test: functional_test
*gettext: gettext
*hashsum: hashsum
*hdparm: hdparm
*hello: hello
*help: help
*hexdump: hexdump
*inb: iorw
*inl: iorw
*inw: iorw
*keystatus: keystatus
*kfreebsd: bsd
*knetbsd: bsd
*kopenbsd: bsd
*list_env: loadenv
*load_env: loadenv
*loopback: loopback
*ls: ls
*lsacpi: lsacpi
*lspci: lspci
*md5sum: hashsum
*menuentry: normal
*pcidump: pcidump
*plainmount: plainmount
*probe: probe
*rdmsr: rdmsr
*read: read
*read_byte: memrw
*read_dword: memrw
*read_word: memrw
*regexp: regexp
*save_env: loadenv
*search: search
*serial: serial
*setpci: setpci
*sha1sum: hashsum
*sha256sum: hashsum
*sha512sum: hashsum
*sleep: sleep
*smbios: smbios
*submenu: normal
*syslinux_configfile: syslinuxcfg
*syslinux_source: syslinuxcfg
*terminfo: terminfo
*test_blockarg: test_blockarg
*testspeed: testspeed
*tr: tr
*trust: pgp
*verify_detached: pgp
*xnu_splash: xnu
*zfskey: zfscrypt
.: configfile
[: test
appleloader: appleldr
authenticate: normal
background_color: gfxterm_background
backtrace: backtrace
badram: mmap
blocklist: blocklist
boot: boot
break: normal
cat: minicmd
cbmemc: cbmemc
chainloader: chain
clear: normal
configfile: configfile
continue: normal
coreboot_boottime: cbtime
cutmem: mmap
date: date
distrust: pgp
dump: minicmd
efitextmode: efitextmode
eval: eval
exit: minicmd
export: normal
extract_entries_configfile: configfile
extract_entries_source: configfile
extract_legacy_entries_configfile: legacycfg
extract_legacy_entries_source: legacycfg
fakebios: loadbios
false: true
fix_video: fixvideo
fwsetup: efifwsetup
gptsync: gptsync
halt: halt
help: minicmd
hexdump_random: random
initrd16: linux16
initrd: linux
keymap: keylayouts
kfreebsd_loadenv: bsd
kfreebsd_module: bsd
kfreebsd_module_elf: bsd
knetbsd_module: bsd
knetbsd_module_elf: bsd
kopenbsd_ramdisk: bsd
legacy_check_password: legacycfg
legacy_configfile: legacycfg
legacy_initrd: legacycfg
legacy_initrd_nounzip: legacycfg
legacy_kernel: legacycfg
legacy_password: legacycfg
legacy_source: legacycfg
linux16: linux16
linux: linux
list_trusted: pgp
loadbios: loadbios
loadfont: font
lscoreboot: cbls
lsefi: lsefi
lsefimmap: lsefimmap
lsefisystab: lsefisystab
lsfonts: font
lsmmap: lsmmap
lsmod: minicmd
lssal: lssal
macppcbless: macbless
mactelbless: macbless
module2: multiboot2
module: multiboot
multiboot2: multiboot2
multiboot: multiboot
nativedisk: nativedisk
net_add_addr: net
net_add_dns: net
net_add_route: net
net_bootp6: net
net_bootp: net
net_del_addr: net
net_del_dns: net
net_del_route: net
net_dhcp: net
net_get_dhcp_option: net
net_ipv6_autoconf: net
net_ls_addr: net
net_ls_cards: net
net_ls_dns: net
net_ls_routes: net
net_nslookup: net
net_set_vlan: net
normal: normal
normal_exit: normal
outb: iorw
outl: iorw
outw: iorw
parttool: parttool
password: password
password_pbkdf2: password_pbkdf2
play: play
reboot: reboot
return: normal
rmmod: minicmd
search.file: search_fs_file
search.fs_label: search_label
search.fs_uuid: search_fs_uuid
setparams: normal
shift: normal
source: configfile
terminal_input: terminal
terminal_output: terminal
test: test
testload: testload
time: time
true: true
usb: usbtest
videoinfo: videoinfo
videotest: videotest
write_byte: memrw
write_dword: memrw
write_word: memrw
wrmsr: wrmsr
xnu_devprop_load: xnu
xnu_kernel64: xnu
xnu_kernel: xnu
xnu_kext: xnu
xnu_kextdir: xnu
xnu_mkext: xnu
xnu_ramdisk: xnu
xnu_resume: xnu
xnu_uuid: xnu_uuid
zfs-bootfs: zfsinfo
zfsinfo: zfsinfo

./new-debian13/boot/grub/x86_64-efi/crypto.lst

RIJNDAEL: gcry_rijndael
RIJNDAEL192: gcry_rijndael
RIJNDAEL256: gcry_rijndael
AES128: gcry_rijndael
AES-128: gcry_rijndael
AES-192: gcry_rijndael
AES-256: gcry_rijndael
ADLER32: adler32
CRC64: crc64
ARCFOUR: gcry_arcfour
BLOWFISH: gcry_blowfish
CAMELLIA128: gcry_camellia
CAMELLIA192: gcry_camellia
CAMELLIA256: gcry_camellia
CAST5: gcry_cast5
CRC32: gcry_crc
CRC32RFC1510: gcry_crc
CRC24RFC2440: gcry_crc
DES: gcry_des
3DES: gcry_des
DSA: gcry_dsa
IDEA: gcry_idea
MD4: gcry_md4
MD5: gcry_md5
RFC2268_40: gcry_rfc2268
AES: gcry_rijndael
AES192: gcry_rijndael
AES256: gcry_rijndael
RIPEMD160: gcry_rmd160
RSA: gcry_rsa
SEED: gcry_seed
SERPENT128: gcry_serpent
SERPENT192: gcry_serpent
SERPENT256: gcry_serpent
SHA1: gcry_sha1
SHA224: gcry_sha256
SHA256: gcry_sha256
SHA512: gcry_sha512
SHA384: gcry_sha512
TIGER192: gcry_tiger
TIGER: gcry_tiger
TIGER2: gcry_tiger
TWOFISH: gcry_twofish
TWOFISH128: gcry_twofish
WHIRLPOOL: gcry_whirlpool

./new-debian13/boot/grub/x86_64-efi/fs.lst

affs
afs
bfs
btrfs
cbfs
cpio
cpio_be
exfat
ext2
f2fs
fat
hfs
hfsplus
iso9660
jfs
minix
minix2
minix2_be
minix3
minix3_be
minix_be
newc
nilfs2
ntfs
odc
procfs
reiserfs
romfs
sfs
squash4
tar
udf
ufs1
ufs1_be
ufs2
xfs
zfs

./new-debian13/boot/grub/x86_64-efi/load.cfg

search.fs_uuid f5b59259-3f9f-4129-bdf5-4503c42a19a8 root hd0,gpt1 
set prefix=($root)'/boot/grub'

./new-debian13/boot/grub/x86_64-efi/moddep.lst

videotest: font gfxmenu video
odc: archelp
loopback: extcmd
macho:
gcry_des: crypto
memrw: extcmd
terminfo: extcmd
f2fs: fshelp
part_gpt:
romfs: fshelp
read: extcmd
lsefimmap:
aout:
gcry_arcfour: crypto
tftp: net
newc: archelp
minix2_be:
afsplitter: crypto
elf:
videotest_checksum: font functional_test video_fb
password_pbkdf2: crypto gcry_sha512 normal pbkdf2
gcry_seed: crypto
pcidump: extcmd
bsd: aout boot cpuid crypto elf extcmd gcry_md5 mmap relocator serial video
sfs: fshelp
reiserfs: fshelp
part_sunpc:
zstd:
gfxmenu: bitmap bitmap_scale font gfxterm normal trig video video_colors
backtrace:
jfs:
help: extcmd normal
configfile: normal
cbls: cbtable
gfxterm_menu: font functional_test normal procfs video_fb
gcry_idea: crypto
tr: extcmd
shift_test: functional_test
ohci: boot cs5536 usb
afs: fshelp
spkmodem: terminfo
usb_keyboard: keylayouts usb
xzio: crypto
syslinuxcfg: extcmd normal
search_fs_file:
wrmsr:
usbms: scsi usb
test_blockarg: extcmd normal
true:
affs: fshelp
iso9660: fshelp
exfat: fshelp
smbios: extcmd
setjmp_test: functional_test setjmp
gfxterm: font video
efinet: net
disk:
appleldr: boot
xfs: fshelp
testspeed: extcmd normal
cpio_be: archelp
functional_test: btrfs extcmd video video_fb
bswap_test: functional_test
sleep: extcmd normal
memdisk:
gcry_rijndael: crypto
mdraid09_be: diskfilter
gettext:
gcry_sha1: crypto
hfspluscomp: gzio hfsplus
cmp: extcmd
random: hexdump
offsetio:
file: elf extcmd macho offsetio
usbserial_usbdebug: serial usb usbserial_common
video_colors:
morse:
hashsum: crypto extcmd normal
usb:
halt: acpi
gfxterm_background: bitmap bitmap_scale extcmd gfxterm video video_colors
search_fs_uuid:
gcry_dsa: mpi pgp
keystatus: extcmd
linux: boot mmap relocator video
geli: crypto cryptodisk gcry_sha256 gcry_sha512 pbkdf2
cmdline_cat_test: font functional_test normal procfs video_fb
rdmsr: extcmd
part_sun:
cbtable:
pbkdf2_test: functional_test gcry_sha1 pbkdf2
video_bochs: video video_fb
bufio:
usbserial_ftdi: serial usb usbserial_common
legacy_password_test: functional_test legacycfg
cpuid: extcmd
hdparm: extcmd hexdump
bfs: fshelp
gcry_blowfish: crypto
test:
nilfs2: fshelp
gcry_rsa: mpi pgp
cryptodisk: crypto extcmd procfs
nativedisk:
minicmd:
signature_test: functional_test procfs
ata: scsi
udf: fshelp
gzio: gcry_crc
xnu_uuid: gcry_md5
uhci: usb
pata: ata
mul_test: functional_test
adler32: crypto
terminal:
div:
ehci: boot cs5536 usb
crypto:
part_bsd: part_msdos
luks2: afsplitter crypto cryptodisk json pbkdf2
cs5536:
gcry_sha512: crypto
password: crypto normal
fshelp:
sleep_test: datetime functional_test
iorw: extcmd
efitextmode:
bli: part_gpt
xnu: bitmap bitmap_scale boot extcmd macho mmap random relocator video
mmap:
exfctest: functional_test
zfsinfo: zfs
ldm: diskfilter part_gpt part_msdos
eval: normal
part_dvh:
lssal:
ext2: fshelp
blocklist:
net: boot bufio datetime priority_queue
part_acorn:
videoinfo: video
btrfs: gzio lzopio raid6rec zstd
lsmmap: mmap
strtoull_test: functional_test
bitmap:
ntfs: fshelp
multiboot: boot elf linux mmap net relocator video
tpm:
gcry_crc: crypto
png: bitmap bufio
json:
jpeg: bitmap bufio
macbless: disk
div_test: div functional_test
regexp: extcmd normal
parttool: normal
usbserial_pl2303: serial usb usbserial_common
cpio: archelp
gcry_rmd160: crypto
fat: fshelp
ufs1_be:
archelp:
http: net
zfs: gzio
raid6rec: diskfilter
lsefisystab:
minix2:
lsacpi: acpi extcmd
datehook: datetime
loadenv: disk extcmd
bitmap_scale: bitmap
probe: extcmd
minix3:
tar: archelp
loadbios:
hfs: fshelp
procfs: archelp
boot:
keylayouts:
progress: normal
kernel:
usbtest: usb
relocator: mmap
acpi: extcmd mmap
tga: bitmap bufio
reboot:
serial: extcmd terminfo
zfscrypt: crypto extcmd gcry_rijndael gcry_sha1 pbkdf2 zfs
efi_uga: video video_fb
dm_nv: diskfilter
cmp_test: functional_test
luks: afsplitter crypto cryptodisk pbkdf2
font: bufio video
raid5rec: diskfilter
crc64: crypto
datetime:
efifwsetup:
ctz_test: functional_test
video:
cbmemc: cbtable normal terminfo
hfsplus: fshelp
gcry_cast5: crypto
extcmd:
squash4: fshelp gzio lzopio xzio
part_plan:
minix_be:
gcry_whirlpool: crypto
gcry_tiger: crypto
fixvideo:
search: extcmd search_fs_file search_fs_uuid search_label
lspci: extcmd
cbtime: cbtable
video_fb:
peimage: setjmp
minix3_be:
trig:
msdospart: disk parttool
priority_queue:
gcry_twofish: crypto
plainmount: crypto cryptodisk extcmd
part_dfly:
xnu_uuid_test: functional_test
diskfilter:
testload:
part_apple:
hexdump: extcmd
date: datetime
pbkdf2: crypto
gcry_sha256: crypto
ls: datetime extcmd normal
usbserial_common: serial usb
ntfscomp: ntfs
lzopio: crypto
video_cirrus: video video_fb
hello: extcmd
scsi:
linux16: boot linux mmap relocator video
cat: extcmd
ahci: ata boot
pgp: crypto extcmd gcry_sha1 mpi
normal: boot bufio crypto datetime extcmd gettext net terminal
ufs1:
mdraid09: diskfilter
lvm: diskfilter
chain: boot efinet net
cbfs: archelp
ufs2:
time:
setpci: extcmd
gptsync: disk
search_label:
setjmp:
multiboot2: acpi boot elf linux mmap net relocator video
gcry_rfc2268: crypto
mdraid1x: diskfilter
mpi: crypto
legacycfg: crypto gcry_md5 normal password
play:
part_amiga:
efi_gop: video video_fb
minix:
echo: extcmd
lsefi:
gcry_serpent: crypto
gcry_md4: crypto
gcry_md5: crypto
part_msdos:
gcry_camellia: crypto
at_keyboard: boot keylayouts
all_video: efi_gop efi_uga video_bochs video_cirrus

./new-debian13/boot/grub/x86_64-efi/modinfo.sh

#!/bin/bash

# User-controllable options
grub_modinfo_target_cpu=x86_64
grub_modinfo_platform=efi
grub_disk_cache_stats=0
grub_boot_time_stats=0
grub_have_font_source=1

# Autodetected config
grub_have_asm_uscore=0
grub_bss_start_symbol=""
grub_end_symbol=""

# Build environment
grub_target_cc='cc'
grub_target_cc_version='cc (Debian 14.2.0-19) 14.2.0'
grub_target_cflags='-std=gnu99 -fno-common -Os -m64 -Wall -W -Wshadow -Wpointer-arith -Wundef -Wchar-subscripts -Wcomment -Wdeprecated-declarations -Wdisabled-optimization -Wdiv-by-zero -Wfloat-equal -Wformat-extra-args -Wformat-security -Wformat-y2k -Wimplicit -Wimplicit-function-declaration -Wimplicit-int -Wmain -Wmissing-braces -Wmissing-format-attribute -Wmultichar -Wparentheses -Wreturn-type -Wsequence-point -Wshadow -Wsign-compare -Wswitch -Wtrigraphs -Wunknown-pragmas -Wunused -Wunused-function -Wunused-label -Wunused-parameter -Wunused-value  -Wunused-variable -Wwrite-strings -Wnested-externs -Wstrict-prototypes -g -Wredundant-decls -Wmissing-prototypes -Wmissing-declarations  -Wextra -Wattributes -Wendif-labels -Winit-self -Wint-to-pointer-cast -Winvalid-pch -Wmissing-field-initializers -Wnonnull -Woverflow -Wvla -Wpointer-to-int-cast -Wstrict-aliasing -Wvariadic-macros -Wvolatile-register-var -Wpointer-sign -Wmissing-include-dirs -Wmissing-prototypes -Wmissing-declarations -Wformat=2 -freg-struct-return -mno-mmx -mno-sse -mno-sse2 -mno-sse3 -mno-3dnow -Wa,-mx86-used-note=no -msoft-float -fno-omit-frame-pointer -fno-dwarf2-cfi-asm -mno-stack-arg-probe -fno-asynchronous-unwind-tables -fno-unwind-tables -fno-ident -mcmodel=large -mno-red-zone -fno-PIE -fno-pie -fno-stack-protector -Wtrampolines -Werror'
grub_target_cppflags='-Wno-unused-but-set-variable -Wall -W  -DGRUB_MACHINE_EFI=1 -DGRUB_MACHINE=X86_64_EFI -m64 -nostdinc -isystem /usr/lib/gcc/x86_64-linux-gnu/14/include -I$(top_srcdir)/include -I$(top_builddir)/include'
grub_target_ccasflags=' -m64 -g  -Wa,-mx86-used-note=no -msoft-float -fno-PIE -fno-pie'
grub_target_ldflags='-no-pie -m64 -Wl,-melf_x86_64 -no-pie -Wl,--build-id=none'
grub_cflags=''
grub_cppflags=' -D_FILE_OFFSET_BITS=64'
grub_ccasflags=''
grub_ldflags=''
grub_target_strip='strip'
grub_target_nm='nm'
grub_target_ranlib='ranlib'
grub_target_objconf=''
grub_target_obj2elf=''
grub_target_img_base_ldopt='-Wl,-Ttext'
grub_target_img_ldflags='@TARGET_IMG_BASE_LDFLAGS@'

# Version
grub_version="2.12"
grub_package="grub"
grub_package_string="GRUB 2.12-9+deb13u2"
grub_package_version="2.12-9+deb13u2"
grub_package_name="GRUB"
grub_package_bugreport="bug-grub@gnu.org"

./new-debian13/boot/grub/x86_64-efi/partmap.lst

part_acorn
part_amiga
part_apple
part_bsd
part_dfly
part_dvh
part_gpt
part_msdos
part_plan
part_sun
part_sunpc

./new-debian13/boot/grub/x86_64-efi/parttool.lst

msdos: msdospart

./new-debian13/boot/grub/x86_64-efi/terminal.lst

iat_keyboard: at_keyboard
iserial: serial
iserial_*: serial
oaudio: morse
ocbmemc: cbmemc
ogfxterm: gfxterm
oserial: serial
oserial_*: serial
ospkmodem: spkmodem

./new-debian13/boot/grub/x86_64-efi/video.lst

efi_gop
efi_uga
video_bochs
video_cirrus

./new-debian13/etc/NetworkManager/dispatcher.d/cloud-init-hook-network-manager

#!/bin/sh
# This file is part of cloud-init. See LICENSE file for license information.

# This script hooks into NetworkManager(8) via its scripts
# arguments are 'interface-name' and 'action'
#
is_azure() {
    local dmi_path="/sys/class/dmi/id/board_vendor" vendor=""
    if [ -e "$dmi_path" ] && read vendor < "$dmi_path"; then
        [ "$vendor" = "Microsoft Corporation" ] && return 0
    fi
    return 1
}

is_enabled() {
    # only execute hooks if cloud-init is enabled and on azure
    [ -e /run/cloud-init/enabled ] || return 1
    is_azure
}

if is_enabled; then
    case "$1:$2" in
        *:up) exec cloud-init dhclient-hook up "$1";;
        *:down) exec cloud-init dhclient-hook down "$1";;
    esac
fi

./new-debian13/etc/apt/sources.list.d/debian.sources

Types: deb
URIs: https://deb.debian.org/debian
Suites: trixie trixie-updates
Components: main contrib non-free non-free-firmware
Signed-By: /usr/share/keyrings/debian-archive-keyring.gpg

Types: deb
URIs: https://security.debian.org/debian-security
Suites: trixie-security
Components: main contrib non-free non-free-firmware
Signed-By: /usr/share/keyrings/debian-archive-keyring.gpg

./new-debian13/etc/cloud/clean.d/README

-- cloud-init's clean.d run-parts directory --

This directory is provided for third party applications which need
additional configuration artifact cleanup from the filesystem when
the command `cloud-init clean` is invoked.

The `cloud-init clean` operation is typically performed by image creators
when preparing a golden image for clone and redeployment. The clean command
removes any cloud-init semaphores, allowing cloud-init to treat the next
boot of this image as the "first boot". When the image is next booted
cloud-init will performing all initial configuration based on any valid
datasource meta-data and user-data.

Any executable scripts in this subdirectory will be invoked in lexicographical
order with run-parts by the command: sudo cloud-init clean.

Typical format of such scripts would be a ##-<some-app> like the following:
  /etc/cloud/clean.d/99-live-installer

./new-debian13/etc/cloud/cloud.cfg

# The top level settings are used as module
# and system configuration.
# A set of users which may be applied and/or used by various modules
# when a 'default' entry is found it will reference the 'default_user'
# from the distro configuration specified below
users:
   - default


# If this is set, 'root' will not be able to ssh in and they
# will get a message to login instead as the default $user
disable_root: true

# This will cause the set+update hostname module to not operate (if true)
preserve_hostname: false

apt:
   # This prevents cloud-init from rewriting apt's sources.list file,
   # which has been a source of surprise.
   preserve_sources_list: true

# If you use datasource_list array, keep array items in a single line.
# If you use multi line array, ds-identify script won't read array items.
# Example datasource config
# datasource:
#    Ec2:
#      metadata_urls: [ 'blah.com' ]
#      timeout: 5 # (defaults to 50 seconds)
#      max_wait: 10 # (defaults to 120 seconds)




# The modules that run in the 'init' stage
cloud_init_modules:
 - seed_random
 - bootcmd
 - write-files
 - growpart
 - resizefs
 - disk_setup
 - mounts
 - set_hostname
 - update_hostname
 - update_etc_hosts
 - ca-certs
 - rsyslog
 - users-groups
 - ssh

# The modules that run in the 'config' stage
cloud_config_modules:
 - snap
 - ssh-import-id
 - keyboard
 - locale
 - set-passwords
 - grub-dpkg
 - apt-pipelining
 - apt-configure
 - ntp
 - timezone
 - disable-ec2-metadata
 - runcmd
 - byobu

# The modules that run in the 'final' stage
cloud_final_modules:
 - package-update-upgrade-install
 - fan
 - landscape
 - lxd
 - write-files-deferred
 - puppet
 - chef
 - mcollective
 - salt-minion
 - reset_rmc
 - scripts-vendor
 - scripts-per-once
 - scripts-per-boot
 - scripts-per-instance
 - scripts-user
 - ssh-authkey-fingerprints
 - keys-to-console
 - install-hotplug
 - phone-home
 - final-message
 - power-state-change

# System and/or distro specific settings
# (not accessible to handlers/transforms)
system_info:
   # This will affect which distro class gets used
   distro: debian
   # Default user name + that default users groups (if added/used)
   default_user:
     name: debian
     lock_passwd: True
     gecos: Debian
     groups: [adm, audio, cdrom, dialout, dip, floppy, plugdev, sudo, video]
     sudo: ["ALL=(ALL) NOPASSWD:ALL"]
     shell: /bin/bash
   # Other config here will be given to the distro class and/or path classes
   paths:
      cloud_dir: /var/lib/cloud/
      templates_dir: /etc/cloud/templates/
   package_mirrors:
     - arches: [default]
       failsafe:
         primary: https://deb.debian.org/debian
         security: https://deb.debian.org/debian-security
   ssh_svcname: ssh

./new-debian13/etc/cloud/cloud.cfg.d/01_debian_cloud.cfg

apt:
  generate_mirrorlists: true

system_info:
  default_user:
    name: debian
    sudo: ALL=(ALL) NOPASSWD:ALL
    shell: /bin/bash
    lock_passwd: True
    gecos: Debian
    groups: [adm, audio, cdrom, dialout, dip, floppy, plugdev, sudo, video]
    sudo: ["ALL=(ALL) NOPASSWD:ALL"]
    shell: /bin/bash

./new-debian13/etc/cloud/cloud.cfg.d/05_logging.cfg

## This yaml formatted config file handles setting
## logger information.  The values that are necessary to be set
## are seen at the bottom.  The top '_log' are only used to remove
## redundancy in a syslog and fallback-to-file case.
##
## The 'log_cfgs' entry defines a list of logger configs
## Each entry in the list is tried, and the first one that
## works is used.  If a log_cfg list entry is an array, it will
## be joined with '\n'.
_log:
 - &log_base |
   [loggers]
   keys=root,cloudinit
   
   [handlers]
   keys=consoleHandler,cloudLogHandler
   
   [formatters]
   keys=simpleFormatter,arg0Formatter
   
   [logger_root]
   level=DEBUG
   handlers=consoleHandler,cloudLogHandler
   
   [logger_cloudinit]
   level=DEBUG
   qualname=cloudinit
   handlers=
   propagate=1
   
   [handler_consoleHandler]
   class=StreamHandler
   level=WARNING
   formatter=arg0Formatter
   args=(sys.stderr,)
   
   [formatter_arg0Formatter]
   format=%(asctime)s - %(filename)s[%(levelname)s]: %(message)s
   
   [formatter_simpleFormatter]
   format=[CLOUDINIT] %(filename)s[%(levelname)s]: %(message)s
 - &log_file |
   [handler_cloudLogHandler]
   class=FileHandler
   level=DEBUG
   formatter=arg0Formatter
   args=('/var/log/cloud-init.log', 'a', 'UTF-8')
 - &log_syslog |
   [handler_cloudLogHandler]
   class=handlers.SysLogHandler
   level=DEBUG
   formatter=simpleFormatter
   args=("/dev/log", handlers.SysLogHandler.LOG_USER)

log_cfgs:
# Array entries in this list will be joined into a string
# that defines the configuration.
#
# If you want logs to go to syslog, uncomment the following line.
# - [ *log_base, *log_syslog ]
#
# The default behavior is to just log to a file.
# This mechanism that does not depend on a system service to operate.
 - [ *log_base, *log_file ]
# A file path can also be used.
# - /etc/log.conf

# This tells cloud-init to redirect its stdout and stderr to
# 'tee -a /var/log/cloud-init-output.log' so the user can see output
# there without needing to look on the console.
output: {all: '| tee -a /var/log/cloud-init-output.log'}

./new-debian13/etc/cloud/cloud.cfg.d/99-ssh.cfg

disable_root: 0
ssh_pwauth: 1
ssh_deletekeys: 0

./new-debian13/etc/cloud/cloud.cfg.d/README

# All files with the '.cfg' extension in this directory will be read by
# cloud-init. They are read in lexical order. Later files overwrite values in
# earlier files.

./new-debian13/etc/cloud/templates/chef_client.rb.tmpl

## template:jinja
{#
This file is only utilized if the module 'cc_chef' is enabled in
cloud-config. Specifically, in order to enable it
you need to add the following to config:
  chef:
    validation_key: XYZ
    validation_cert: XYZ
    validation_name: XYZ
    server_url: XYZ
-#}
{{generated_by}}
{#
The reason these are not in quotes is because they are ruby
symbols that will be placed inside here, and not actual strings...
#}
{% if chef_license %}
chef_license           "{{chef_license}}"
{% endif%}
{% if log_level %}
log_level              {{log_level}}
{% endif %}
{% if ssl_verify_mode %}
ssl_verify_mode        {{ssl_verify_mode}}
{% endif %}
{% if log_location %}
log_location           "{{log_location}}"
{% endif %}
{% if validation_name %}
validation_client_name "{{validation_name}}"
{% endif %}
{% if validation_cert %}
validation_key         "{{validation_key}}"
{% endif %}
{% if client_key %}
client_key             "{{client_key}}"
{% endif %}
{% if server_url %}
chef_server_url        "{{server_url}}"
{% endif %}
{% if environment %}
environment            "{{environment}}"
{% endif %}
{% if node_name %}
node_name              "{{node_name}}"
{% endif %}
{% if json_attribs %}
json_attribs           "{{json_attribs}}"
{% endif %}
{% if file_cache_path %}
file_cache_path        "{{file_cache_path}}"
{% endif %}
{% if file_backup_path %}
file_backup_path       "{{file_backup_path}}"
{% endif %}
{% if pid_file %}
pid_file               "{{pid_file}}"
{% endif %}
{% if show_time %}
Chef::Log::Formatter.show_time = true
{% endif %}
{% if encrypted_data_bag_secret %}
encrypted_data_bag_secret "{{encrypted_data_bag_secret}}"
{% endif %}

./new-debian13/etc/cloud/templates/chrony.conf.almalinux.tmpl

## template:jinja
# Use public servers from the pool.ntp.org project.
# Please consider joining the pool (http://www.pool.ntp.org/join.html).
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}
{% for peer in peers -%}
peer {{peer}}
{% endfor %}
{% for a in allow -%}
allow {{a}}
{% endfor %}

# Record the rate at which the system clock gains/losses time.
driftfile /var/lib/chrony/drift

# Allow the system clock to be stepped in the first three updates
# if its offset is larger than 1 second.
makestep 1.0 3

# Enable kernel synchronization of the real-time clock (RTC).
rtcsync

# Enable hardware timestamping on all interfaces that support it.
#hwtimestamp *

# Increase the minimum number of selectable sources required to adjust
# the system clock.
#minsources 2

# Allow NTP client access from local network.
#allow 192.168.0.0/16

# Serve time even if not synchronized to a time source.
#local stratum 10

# Specify file containing keys for NTP authentication.
#keyfile /etc/chrony.keys

# Specify directory for log files.
logdir /var/log/chrony

# Select which information is logged.
#log measurements statistics tracking

./new-debian13/etc/cloud/templates/chrony.conf.alpine.tmpl

## template:jinja
# Welcome to the chrony configuration file. See chrony.conf(5) for more
# information about usable directives.
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}
{% for peer in peers -%}
peer {{peer}}
{% endfor %}
{% for a in allow -%}
allow {{a}}
{% endfor %}

# This directive specifies the location of the file containing ID/key pairs for
# NTP authentication.
keyfile /etc/chrony/chrony.keys

# This directive specifies the file into which chronyd will store the rate
# information.
driftfile /var/lib/chrony/chrony.drift

# Uncomment the following line to turn logging on.
#log tracking measurements statistics

# Log files location.
logdir /var/log/chrony

# Stop bad estimates upsetting machine clock.
maxupdateskew 100.0

# This directive enables kernel synchronisation (every 11 minutes) of the
# real-time clock. Note that it can’t be used along with the 'rtcfile' directive.
rtcsync

# Step the system clock instead of slewing it if the adjustment is larger than
# one second, but only in the first three clock updates.
makestep 1 3

./new-debian13/etc/cloud/templates/chrony.conf.centos.tmpl

## template:jinja
# Use public servers from the pool.ntp.org project.
# Please consider joining the pool (http://www.pool.ntp.org/join.html).
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}
{% for peer in peers -%}
peer {{peer}}
{% endfor %}
{% for a in allow -%}
allow {{a}}
{% endfor %}

# Record the rate at which the system clock gains/losses time.
driftfile /var/lib/chrony/drift

# Allow the system clock to be stepped in the first three updates
# if its offset is larger than 1 second.
makestep 1.0 3

# Enable kernel synchronization of the real-time clock (RTC).
rtcsync

# Enable hardware timestamping on all interfaces that support it.
#hwtimestamp *

# Increase the minimum number of selectable sources required to adjust
# the system clock.
#minsources 2

# Allow NTP client access from local network.
#allow 192.168.0.0/16

# Serve time even if not synchronized to a time source.
#local stratum 10

# Specify file containing keys for NTP authentication.
#keyfile /etc/chrony.keys

# Specify directory for log files.
logdir /var/log/chrony

# Select which information is logged.
#log measurements statistics tracking

./new-debian13/etc/cloud/templates/chrony.conf.cloudlinux.tmpl

## template:jinja
# Use public servers from the pool.ntp.org project.
# Please consider joining the pool (http://www.pool.ntp.org/join.html).
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}
{% for peer in peers -%}
peer {{peer}}
{% endfor %}
{% for a in allow -%}
allow {{a}}
{% endfor %}

# Record the rate at which the system clock gains/losses time.
driftfile /var/lib/chrony/drift

# Allow the system clock to be stepped in the first three updates
# if its offset is larger than 1 second.
makestep 1.0 3

# Enable kernel synchronization of the real-time clock (RTC).
rtcsync

# Enable hardware timestamping on all interfaces that support it.
#hwtimestamp *

# Increase the minimum number of selectable sources required to adjust
# the system clock.
#minsources 2

# Allow NTP client access from local network.
#allow 192.168.0.0/16

# Serve time even if not synchronized to a time source.
#local stratum 10

# Specify file containing keys for NTP authentication.
#keyfile /etc/chrony.keys

# Specify directory for log files.
logdir /var/log/chrony

# Select which information is logged.
#log measurements statistics tracking

./new-debian13/etc/cloud/templates/chrony.conf.cos.tmpl

## template:jinja
# Welcome to the chrony configuration file. See chrony.conf(5) for more
# information about usable directives.

{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}
{% for peer in peers -%}
peer {{peer}}
{% endfor %}
{% for a in allow -%}
allow {{a}}
{% endfor %}

# This directive specify the file into which chronyd will store the rate
# information.
driftfile /var/lib/chrony/chrony.drift

# This directive enables kernel synchronisation (every 11 minutes) of the
# real-time clock. Note that it can’t be used along with the 'rtcfile' directive.
rtcsync

# Step the system clock instead of slewing it if the adjustment is larger than
# one second, but only in the first three clock updates.
makestep 1 3

./new-debian13/etc/cloud/templates/chrony.conf.debian.tmpl

## template:jinja
# Welcome to the chrony configuration file. See chrony.conf(5) for more
# information about usable directives.
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}
{% for peer in peers -%}
peer {{peer}}
{% endfor %}
{% for a in allow -%}
allow {{a}}
{% endfor %}

# This directive specify the location of the file containing ID/key pairs for
# NTP authentication.
keyfile /etc/chrony/chrony.keys

# This directive specify the file into which chronyd will store the rate
# information.
driftfile /var/lib/chrony/chrony.drift

# Uncomment the following line to turn logging on.
#log tracking measurements statistics

# Log files location.
logdir /var/log/chrony

# Stop bad estimates upsetting machine clock.
maxupdateskew 100.0

# This directive enables kernel synchronisation (every 11 minutes) of the
# real-time clock. Note that it can’t be used along with the 'rtcfile' directive.
rtcsync

# Step the system clock instead of slewing it if the adjustment is larger than
# one second, but only in the first three clock updates.
makestep 1 3

./new-debian13/etc/cloud/templates/chrony.conf.fedora.tmpl

## template:jinja
# Use public servers from the pool.ntp.org project.
# Please consider joining the pool (http://www.pool.ntp.org/join.html).
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}
{% for peer in peers -%}
peer {{peer}}
{% endfor %}
{% for a in allow -%}
allow {{a}}
{% endfor %}

# Record the rate at which the system clock gains/losses time.
driftfile /var/lib/chrony/drift

# Allow the system clock to be stepped in the first three updates
# if its offset is larger than 1 second.
makestep 1.0 3

# Enable kernel synchronization of the real-time clock (RTC).
rtcsync

# Enable hardware timestamping on all interfaces that support it.
#hwtimestamp *

# Increase the minimum number of selectable sources required to adjust
# the system clock.
#minsources 2

# Allow NTP client access from local network.
#allow 192.168.0.0/16

# Serve time even if not synchronized to a time source.
#local stratum 10

# Specify file containing keys for NTP authentication.
#keyfile /etc/chrony.keys

# Get TAI-UTC offset and leap seconds from the system tz database.
leapsectz right/UTC

# Specify directory for log files.
logdir /var/log/chrony

# Select which information is logged.
#log measurements statistics tracking

./new-debian13/etc/cloud/templates/chrony.conf.freebsd.tmpl

## template:jinja
#######################################################################
#
# This is an example chrony configuration file.  You should copy it to
# /usr/local/etc/chrony.conf after uncommenting and editing the options that you
# want to enable.  The more obscure options are not included.  Refer
# to the documentation for these.
#
#######################################################################
### COMMENTS
# Any of the following lines are comments (you have a choice of
# comment start character):
# a comment
% a comment
! a comment
; a comment
#
# Below, the '!' form is used for lines that you might want to
# uncomment and edit to make your own chrony.conf file.
#
#######################################################################
#######################################################################
### SPECIFY YOUR NTP SERVERS
# Most computers using chrony will send measurement requests to one or
# more 'NTP servers'.  You will probably find that your Internet Service
# Provider or company have one or more NTP servers that you can specify.
# Failing that, there are a lot of public NTP servers.  There is a list
# you can access at http://support.ntp.org/bin/view/Servers/WebHome or
# you can use servers from the pool.ntp.org project.

{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}

# This is a reasonable default setting to have on in typical cases for
# a workstation with a full-time internet connection:
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}

{% for peer in peers -%}
peer {{peer}}
{% endfor %}
{% for a in allow -%}
allow {{a}}
{% endfor %}
#######################################################################
### AVOIDING POTENTIALLY BOGUS CHANGES TO YOUR CLOCK
#
# To avoid changes being made to your computer's gain/loss compensation
# when the measurement history is too erratic, you might want to enable
# one of the following lines.  The first seems good with servers on the
# Internet, the second seems OK for a LAN environment.

! maxupdateskew 100
! maxupdateskew 5

# If you want to increase the minimum number of selectable sources
# required to update the system clock in order to make the
# synchronisation more reliable, uncomment (and edit) the following
# line.

! minsources 2

# If your computer has a good stable clock (e.g. it is not a virtual
# machine), you might also want to reduce the maximum assumed drift
# (frequency error) of the clock (the value is specified in ppm).

! maxdrift 100

# By default, chronyd allows synchronisation to an unauthenticated NTP
# source (i.e. specified without the nts and key options) if it agrees with
# a majority of authenticated NTP sources, or if no authenticated source is
# specified.  If you don't want chronyd to ever synchronise to an
# unauthenticated NTP source, uncomment the first from the following lines.
# If you don't want to synchronise to an unauthenticated NTP source only
# when an authenticated source is specified, uncomment the second line.
# If you want chronyd to ignore authentication in the source selection,
# uncomment the third line.

! authselectmode require
! authselectmode prefer
! authselectmode ignore

#######################################################################
### FILENAMES ETC
# Chrony likes to keep information about your computer's clock in files.
# The 'driftfile' stores the computer's clock gain/loss rate in parts
# per million.  When chronyd starts, the system clock can be tuned
# immediately so that it doesn't gain or lose any more time.  You
# generally want this, so it is uncommented.

driftfile /var/db/chrony/drift

# If you want to enable NTP authentication with symmetric keys, you will need
# to uncomment the following line and edit the file to set up the keys.

! keyfile /usr/local/etc/chrony.keys

# If you specify an NTP server with the nts option to enable authentication
# with the Network Time Security (NTS) mechanism, or enable server NTS with
# the ntsservercert and ntsserverkey directives below, the following line will
# allow the client/server to save the NTS keys and cookies in order to reduce
# the number of key establishments (NTS-KE sessions).

ntsdumpdir /var/db/chrony

# If chronyd is configured to act as an NTP server and you want to enable NTS
# for its clients, you will need a TLS certificate and private key.  Uncomment
# and edit the following lines to specify the locations of the certificate and
# key.

! ntsservercert /etc/.../foo.example.net.crt
! ntsserverkey /etc/.../foo.example.net.key

# chronyd can save the measurement history for the servers to files when
# it exits.  This is useful in 2 situations:
#
# 1. If you stop chronyd and restart it with the '-r' option (e.g. after
# an upgrade), the old measurements will still be relevant when chronyd
# is restarted.  This will reduce the time needed to get accurate
# gain/loss measurements.
#
# 2. On Linux, if you use the RTC support and start chronyd with
# '-r -s' on bootup, measurements from the last boot will still be
# useful (the real time clock is used to 'flywheel' chronyd between
# boots).
#
# Uncomment the following line to use this.

! dumpdir /var/db/chrony

# chronyd writes its process ID to a file.  If you try to start a second
# copy of chronyd, it will detect that the process named in the file is
# still running and bail out.  If you want to change the path to the PID
# file, uncomment this line and edit it.  The default path is shown.

! pidfile /var/run/chrony/chronyd.pid

# If the system timezone database is kept up to date and includes the
# right/UTC timezone, chronyd can use it to determine the current
# TAI-UTC offset and when will the next leap second occur.

! leapsectz right/UTC

#######################################################################
### INITIAL CLOCK CORRECTION
# This option is useful to quickly correct the clock on start if it's
# off by a large amount.  The value '1.0' means that if the error is less
# than 1 second, it will be gradually removed by speeding up or slowing
# down your computer's clock until it is correct.  If the error is above
# 1 second, an immediate time jump will be applied to correct it.  The
# value '3' means the step is allowed only in the first three updates of
# the clock.  Some software can get upset if the system clock jumps
# (especially backwards), so be careful!

! makestep 1.0 3

#######################################################################
### LEAP SECONDS
# A leap second is an occasional one-second correction of the UTC
# time scale.  By default, chronyd tells the kernel to insert/delete
# the leap second, which makes a backward/forward step to correct the
# clock for it.  As with the makestep directive, this jump can upset
# some applications.  If you prefer chronyd to make a gradual
# correction, causing the clock to be off for a longer time, uncomment
# the following line.

! leapsecmode slew

#######################################################################
### LOGGING
# If you want to log information about the time measurements chronyd has
# gathered, you might want to enable the following lines.  You probably
# only need this if you really enjoy looking at the logs, you want to
# produce some graphs of your system's timekeeping performance, or you
# need help in debugging a problem.
#
# If you enable logging, you may want to add an entry to a log rotation
# utility's configuration (e.g., newsyslog(8)).  'chronyc cyclelogs'
# should be used to signal chronyd that a log file has been renamed.

! logdir /var/log/chrony
! log measurements statistics tracking

# If you have real time clock support enabled (see below), you might want
# this line instead:

! log measurements statistics tracking rtc

#######################################################################
### ACTING AS AN NTP SERVER
# You might want the computer to be an NTP server for other computers.
#
# By default, chronyd does not allow any clients to access it.  You need
# to explicitly enable access using 'allow' and 'deny' directives.
#
# e.g. to enable client access from the 192.168.*.* class B subnet,

! allow 192.168/16

# .. but disallow the 192.168.100.* subnet of that,

! deny 192.168.100/24

# You can have as many allow and deny directives as you need.  The order
# is unimportant.

# If you want to present your computer's time for others to synchronise
# with, even if you don't seem to be synchronised to any NTP servers
# yourself, enable the following line.  The value 10 may be varied
# between 1 and 15.  You should avoid small values because you will look
# like a real NTP server.  The value 10 means that you appear to be 10
# NTP 'hops' away from an authoritative source (atomic clock, GPS
# receiver, radio clock etc).

! local stratum 10

# Normally, chronyd will keep track of how many times each client
# machine accesses it.  The information can be accessed by the 'clients'
# command of chronyc.  You can disable this facility by uncommenting the
# following line.  This will save a bit of memory if you have many
# clients and it will also disable support for the interleaved mode.

! noclientlog

# The clientlog size is limited to 512KB by default.  If you have many
# clients, you might want to increase the limit.

! clientloglimit 4194304

# By default, chronyd tries to respond to all valid NTP requests from
# allowed addresses.  If you want to limit the response rate for NTP
# clients that are sending requests too frequently, uncomment and edit
# the following line.

! ratelimit interval 3 burst 8

#######################################################################
### REPORTING BIG CLOCK CHANGES
# Perhaps you want to know if chronyd suddenly detects any large error
# in your computer's clock.  This might indicate a fault or a problem
# with the server(s) you are using, for example.
#
# The next option causes a message to be written to syslog when chronyd
# has to correct an error above 0.5 seconds (you can use any amount you
# like).

! logchange 0.5

# The next option will send email to the named person when chronyd has
# to correct an error above 0.5 seconds.  (If you need to send mail to
# several people, you need to set up a mailing list or sendmail alias
# for them and use the address of that.)

! mailonchange wibble@foo.example.net 0.5

#######################################################################
### COMMAND ACCESS
# The program chronyc is used to show the current operation of chronyd
# and to change parts of its configuration whilst it is running.

# By default chronyd binds to the loopback interface.  Uncomment the
# following lines to allow receiving command packets from remote hosts.

! bindcmdaddress 0.0.0.0
! bindcmdaddress ::

# Normally, chronyd will only allow connections from chronyc on the same
# machine as itself.  This is for security.  If you have a subnet
# 192.168.*.* and you want to be able to use chronyc from any machine on
# it, you could uncomment the following line.  (Edit this to your own
# situation.)

! cmdallow 192.168/16

# You can add as many 'cmdallow' and 'cmddeny' lines as you like.  The
# syntax and meaning is the same as for 'allow' and 'deny', except that
# 'cmdallow' and 'cmddeny' control access to the chronyd's command port.

# Rate limiting can be enabled also for command packets.  (Note,
# commands from localhost are never limited.)

! cmdratelimit interval -4 burst 16

#######################################################################
### HARDWARE TIMESTAMPING
# On Linux, if the network interface controller and its driver support
# hardware timestamping, it can significantly improve the accuracy of
# synchronisation. It can be enabled on specified interfaces only, or it
# can be enabled on all interfaces that support it.

! hwtimestamp eth0
! hwtimestamp *

#######################################################################
### REAL TIME CLOCK
# chronyd can characterise the system's real-time clock.  This is the
# clock that keeps running when the power is turned off, so that the
# machine knows the approximate time when it boots again.  The error at
# a particular epoch and gain/loss rate can be written to a file and
# used later by chronyd when it is started with the '-s' option.
#
# You need to have 'enhanced RTC support' compiled into your Linux
# kernel.  (Note, these options apply only to Linux.)

! rtcfile /var/db/chrony/rtc

# Your RTC can be set to keep Universal Coordinated Time (UTC) or local
# time.  (Local time means UTC +/- the effect of your timezone.)  If you
# use UTC, chronyd will function correctly even if the computer is off
# at the epoch when you enter or leave summer time (aka daylight saving
# time).  However, if you dual boot your system with Microsoft Windows,
# that will work better if your RTC maintains local time.  You take your
# pick!

! rtconutc

# By default chronyd assumes that the enhanced RTC device is accessed as
# /dev/rtc.  If it's accessed somewhere else on your system (e.g. you're
# using devfs), uncomment and edit the following line.

! rtcdevice /dev/misc/rtc

# Alternatively, if not using the -s option, this directive can be used
# to enable a mode in which the RTC is periodically set to the system
# time, with no tracking of its drift.

! rtcsync

#######################################################################
### REAL TIME SCHEDULER
# This directive tells chronyd to use the real-time FIFO scheduler with the
# specified priority (which must be between 0 and 100).  This should result
# in reduced latency.  You don't need it unless you really have a requirement
# for extreme clock stability.  Works only on Linux.  Note that the "-P"
# command-line switch will override this.

! sched_priority 1

#######################################################################
### LOCKING CHRONYD INTO RAM
# This directive tells chronyd to use the mlockall() syscall to lock itself
# into RAM so that it will never be paged out.  This should result in reduced
# latency.  You don't need it unless you really have a requirement
# for extreme clock stability.  Works only on Linux.  Note that the "-m"
# command-line switch will also enable this feature.

! lock_all

./new-debian13/etc/cloud/templates/chrony.conf.opensuse-leap.tmpl

## template:jinja
# Use public servers from the pool.ntp.org project.
# Please consider joining the pool (http://www.pool.ntp.org/join.html).
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}
{% for peer in peers -%}
peer {{peer}}
{% endfor %}
{% for a in allow -%}
allow {{a}}
{% endfor %}

# Record the rate at which the system clock gains/losses time.
driftfile /var/lib/chrony/drift

# In first three updates step the system clock instead of slew
# if the adjustment is larger than 1 second.
makestep 1.0 3

# Enable kernel synchronization of the real-time clock (RTC).
rtcsync

# Allow NTP client access from local network.
#allow 192.168/16

# Serve time even if not synchronized to any NTP server.
#local stratum 10

# Specify file containing keys for NTP authentication.
#keyfile /etc/chrony.keys

# Specify directory for log files.
logdir /var/log/chrony

# Select which information is logged.
#log measurements statistics tracking

./new-debian13/etc/cloud/templates/chrony.conf.opensuse-microos.tmpl

## template:jinja
# Use public servers from the pool.ntp.org project.
# Please consider joining the pool (http://www.pool.ntp.org/join.html).
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}
{% for peer in peers -%}
peer {{peer}}
{% endfor %}
{% for a in allow -%}
allow {{a}}
{% endfor %}

# Record the rate at which the system clock gains/losses time.
driftfile /var/lib/chrony/drift

# In first three updates step the system clock instead of slew
# if the adjustment is larger than 1 second.
makestep 1.0 3

# Enable kernel synchronization of the real-time clock (RTC).
rtcsync

# Allow NTP client access from local network.
#allow 192.168/16

# Serve time even if not synchronized to any NTP server.
#local stratum 10

# Specify file containing keys for NTP authentication.
#keyfile /etc/chrony.keys

# Specify directory for log files.
logdir /var/log/chrony

# Select which information is logged.
#log measurements statistics tracking

./new-debian13/etc/cloud/templates/chrony.conf.opensuse-tumbleweed.tmpl

## template:jinja
# Use public servers from the pool.ntp.org project.
# Please consider joining the pool (http://www.pool.ntp.org/join.html).
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}
{% for peer in peers -%}
peer {{peer}}
{% endfor %}
{% for a in allow -%}
allow {{a}}
{% endfor %}

# Record the rate at which the system clock gains/losses time.
driftfile /var/lib/chrony/drift

# In first three updates step the system clock instead of slew
# if the adjustment is larger than 1 second.
makestep 1.0 3

# Enable kernel synchronization of the real-time clock (RTC).
rtcsync

# Allow NTP client access from local network.
#allow 192.168/16

# Serve time even if not synchronized to any NTP server.
#local stratum 10

# Specify file containing keys for NTP authentication.
#keyfile /etc/chrony.keys

# Specify directory for log files.
logdir /var/log/chrony

# Select which information is logged.
#log measurements statistics tracking

./new-debian13/etc/cloud/templates/chrony.conf.opensuse.tmpl

## template:jinja
# Use public servers from the pool.ntp.org project.
# Please consider joining the pool (http://www.pool.ntp.org/join.html).
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}
{% for peer in peers -%}
peer {{peer}}
{% endfor %}
{% for a in allow -%}
allow {{a}}
{% endfor %}

# Record the rate at which the system clock gains/losses time.
driftfile /var/lib/chrony/drift

# In first three updates step the system clock instead of slew
# if the adjustment is larger than 1 second.
makestep 1.0 3

# Enable kernel synchronization of the real-time clock (RTC).
rtcsync

# Allow NTP client access from local network.
#allow 192.168/16

# Serve time even if not synchronized to any NTP server.
#local stratum 10

# Specify file containing keys for NTP authentication.
#keyfile /etc/chrony.keys

# Specify directory for log files.
logdir /var/log/chrony

# Select which information is logged.
#log measurements statistics tracking

./new-debian13/etc/cloud/templates/chrony.conf.photon.tmpl

## template:jinja
# Use public servers from the pool.ntp.org project.
# Please consider joining the pool (http://www.pool.ntp.org/join.html).
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}
{% for peer in peers -%}
peer {{peer}}
{% endfor %}
{% for a in allow -%}
allow {{a}}
{% endfor %}

# Record the rate at which the system clock gains/losses time.
driftfile /var/lib/chrony/drift

# Allow the system clock to be stepped in the first three updates
# if its offset is larger than 1 second.
makestep 1.0 3

# Enable kernel synchronization of the real-time clock (RTC).
rtcsync

# Enable hardware timestamping on all interfaces that support it.
#hwtimestamp *

# Increase the minimum number of selectable sources required to adjust
# the system clock.
#minsources 2

# Allow NTP client access from local network.
#allow 192.168.0.0/16

# Serve time even if not synchronized to a time source.
#local stratum 10

# Specify file containing keys for NTP authentication.
#keyfile /etc/chrony.keys

# Get TAI-UTC offset and leap seconds from the system tz database.
leapsectz right/UTC

# Specify directory for log files.
logdir /var/log/chrony

# Select which information is logged.
#log measurements statistics tracking

./new-debian13/etc/cloud/templates/chrony.conf.rhel.tmpl

## template:jinja
# Use public servers from the pool.ntp.org project.
# Please consider joining the pool (http://www.pool.ntp.org/join.html).
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}
{% for peer in peers -%}
peer {{peer}}
{% endfor %}
{% for a in allow -%}
allow {{a}}
{% endfor %}

# Record the rate at which the system clock gains/losses time.
driftfile /var/lib/chrony/drift

# Allow the system clock to be stepped in the first three updates
# if its offset is larger than 1 second.
makestep 1.0 3

# Enable kernel synchronization of the real-time clock (RTC).
rtcsync

# Enable hardware timestamping on all interfaces that support it.
#hwtimestamp *

# Increase the minimum number of selectable sources required to adjust
# the system clock.
#minsources 2

# Allow NTP client access from local network.
#allow 192.168.0.0/16

# Serve time even if not synchronized to a time source.
#local stratum 10

# Specify file containing keys for NTP authentication.
#keyfile /etc/chrony.keys

# Specify directory for log files.
logdir /var/log/chrony

# Select which information is logged.
#log measurements statistics tracking

./new-debian13/etc/cloud/templates/chrony.conf.rocky.tmpl

## template:jinja
# Use public servers from the pool.ntp.org project.
# Please consider joining the pool (http://www.pool.ntp.org/join.html).
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}
{% for peer in peers -%}
peer {{peer}}
{% endfor %}
{% for a in allow -%}
allow {{a}}
{% endfor %}

# Record the rate at which the system clock gains/losses time.
driftfile /var/lib/chrony/drift

# Allow the system clock to be stepped in the first three updates
# if its offset is larger than 1 second.
makestep 1.0 3

# Enable kernel synchronization of the real-time clock (RTC).
rtcsync

# Enable hardware timestamping on all interfaces that support it.
#hwtimestamp *

# Increase the minimum number of selectable sources required to adjust
# the system clock.
#minsources 2

# Allow NTP client access from local network.
#allow 192.168.0.0/16

# Serve time even if not synchronized to a time source.
#local stratum 10

# Specify file containing keys for NTP authentication.
#keyfile /etc/chrony.keys

# Specify directory for log files.
logdir /var/log/chrony

# Select which information is logged.
#log measurements statistics tracking

./new-debian13/etc/cloud/templates/chrony.conf.sle-micro.tmpl

## template:jinja
# Use public servers from the pool.ntp.org project.
# Please consider joining the pool (http://www.pool.ntp.org/join.html).
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}
{% for peer in peers -%}
peer {{peer}}
{% endfor %}
{% for a in allow -%}
allow {{a}}
{% endfor %}

# Record the rate at which the system clock gains/losses time.
driftfile /var/lib/chrony/drift

# In first three updates step the system clock instead of slew
# if the adjustment is larger than 1 second.
makestep 1.0 3

# Enable kernel synchronization of the real-time clock (RTC).
rtcsync

# Allow NTP client access from local network.
#allow 192.168/16

# Serve time even if not synchronized to any NTP server.
#local stratum 10

# Specify file containing keys for NTP authentication.
#keyfile /etc/chrony.keys

# Specify directory for log files.
logdir /var/log/chrony

# Select which information is logged.
#log measurements statistics tracking

./new-debian13/etc/cloud/templates/chrony.conf.sle_hpc.tmpl

## template:jinja
# Use public servers from the pool.ntp.org project.
# Please consider joining the pool (http://www.pool.ntp.org/join.html).
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}
{% for peer in peers -%}
peer {{peer}}
{% endfor %}
{% for a in allow -%}
allow {{a}}
{% endfor %}

# Record the rate at which the system clock gains/losses time.
driftfile /var/lib/chrony/drift

# In first three updates step the system clock instead of slew
# if the adjustment is larger than 1 second.
makestep 1.0 3

# Enable kernel synchronization of the real-time clock (RTC).
rtcsync

# Allow NTP client access from local network.
#allow 192.168/16

# Serve time even if not synchronized to any NTP server.
#local stratum 10

# Specify file containing keys for NTP authentication.
#keyfile /etc/chrony.keys

# Specify directory for log files.
logdir /var/log/chrony

# Select which information is logged.
#log measurements statistics tracking

./new-debian13/etc/cloud/templates/chrony.conf.sles.tmpl

## template:jinja
# Use public servers from the pool.ntp.org project.
# Please consider joining the pool (http://www.pool.ntp.org/join.html).
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}
{% for peer in peers -%}
peer {{peer}}
{% endfor %}
{% for a in allow -%}
allow {{a}}
{% endfor %}

# Record the rate at which the system clock gains/losses time.
driftfile /var/lib/chrony/drift

# In first three updates step the system clock instead of slew
# if the adjustment is larger than 1 second.
makestep 1.0 3

# Enable kernel synchronization of the real-time clock (RTC).
rtcsync

# Allow NTP client access from local network.
#allow 192.168/16

# Serve time even if not synchronized to any NTP server.
#local stratum 10

# Specify file containing keys for NTP authentication.
#keyfile /etc/chrony.keys

# Specify directory for log files.
logdir /var/log/chrony

# Select which information is logged.
#log measurements statistics tracking

./new-debian13/etc/cloud/templates/chrony.conf.ubuntu.tmpl

## template:jinja
# Welcome to the chrony configuration file. See chrony.conf(5) for more
# information about usable directives.

# Use servers from the NTP Pool Project. Approved by Ubuntu Technical Board
# on 2011-02-08 (LP: #104525). See http://www.pool.ntp.org/join.html for
# more information.
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}
{% for peer in peers -%}
peer {{peer}}
{% endfor %}
{% for a in allow -%}
allow {{a}}
{% endfor %}

# This directive specify the location of the file containing ID/key pairs for
# NTP authentication.
keyfile /etc/chrony/chrony.keys

# This directive specify the file into which chronyd will store the rate
# information.
driftfile /var/lib/chrony/chrony.drift

# Uncomment the following line to turn logging on.
#log tracking measurements statistics

# Log files location.
logdir /var/log/chrony

# Stop bad estimates upsetting machine clock.
maxupdateskew 100.0

# This directive enables kernel synchronisation (every 11 minutes) of the
# real-time clock. Note that it can’t be used along with the 'rtcfile' directive.
rtcsync

# Step the system clock instead of slewing it if the adjustment is larger than
# one second, but only in the first three clock updates.
makestep 1 3

./new-debian13/etc/cloud/templates/host.mariner.tmpl

+## template:jinja
+{#
+This file /etc/cloud/templates/hosts.mariner.tmpl is only utilized
+if enabled in cloud-config.  Specifically, in order to enable it
+you need to add the following to config:
+  manage_etc_hosts: True
+-#}
+# Your system has configured 'manage_etc_hosts' as True.
+# As a result, if you wish for changes to this file to persist
+# then you will need to either
+# a.) make changes to the master file in /etc/cloud/templates/hosts.mariner.tmpl
+# b.) change or remove the value of 'manage_etc_hosts' in
+#     /etc/cloud/cloud.cfg or cloud-config from user-data
+#
+# The following lines are desirable for IPv4 capable hosts
+127.0.0.1 {{fqdn}} {{hostname}}
+127.0.0.1 localhost.localdomain localhost
+127.0.0.1 localhost4.localdomain4 localhost4
+
+# The following lines are desirable for IPv6 capable hosts
+::1 {{fqdn}} {{hostname}}
+::1 localhost6.localdomain6 localhost6

./new-debian13/etc/cloud/templates/hosts.alpine.tmpl

## template:jinja
{#
This file /etc/cloud/templates/hosts.alpine.tmpl is only utilized
if enabled in cloud-config.  Specifically, in order to enable it
you need to add the following to config:
  manage_etc_hosts: True
-#}
# Your system has configured 'manage_etc_hosts' as True.
# As a result, if you wish for changes to this file to persist
# then you will need to either
# a.) make changes to the master file in /etc/cloud/templates/hosts.alpine.tmpl
# b.) change or remove the value of 'manage_etc_hosts' in
#     /etc/cloud/cloud.cfg or cloud-config from user-data
#
# The following lines are desirable for IPv4 capable hosts
127.0.0.1 localhost.localdomain localhost
127.0.0.1 localhost4.localdomain4 localhost4
127.0.1.1 {{fqdn}} {{hostname}}

# The following lines are desirable for IPv6 capable hosts
::1 localhost6.localdomain6 localhost6

ff02::1 ip6-allnodes
ff02::2 ip6-allrouters

./new-debian13/etc/cloud/templates/hosts.aosc.tmpl

## template:jinja
{#
This file (/etc/cloud/templates/hosts.aosc.tmpl) is only utilized
if enabled in cloud-config.  Specifically, in order to enable it
you need to add the following to config:
   manage_etc_hosts: True
-#}
# Your system has configured 'manage_etc_hosts' as True.
# As a result, if you wish for changes to this file to persist
# then you will need to either
# a.) make changes to the master file in /etc/cloud/templates/hosts.aosc.tmpl
# b.) change or remove the value of 'manage_etc_hosts' in
#     /etc/cloud/cloud.cfg or cloud-config from user-data
#
#<ip-address>   <hostname.domain.org>   <hostname>
{# The value '{{hostname}}' will be replaced with the local-hostname -#}
127.0.0.1       {{fqdn}} {{hostname}}
127.0.0.1       localhost

# The following lines are desirable for IPv6 capable hosts
::1             localhost ip6-localhost ip6-loopback
ff02::1         ip6-allnodes
ff02::2         ip6-allrouters

./new-debian13/etc/cloud/templates/hosts.arch.tmpl

## template:jinja
{#
This file (/etc/cloud/templates/hosts.arch.tmpl) is only utilized
if enabled in cloud-config.  Specifically, in order to enable it
you need to add the following to config:
   manage_etc_hosts: True
-#}
# Your system has configured 'manage_etc_hosts' as True.
# As a result, if you wish for changes to this file to persist
# then you will need to either
# a.) make changes to the master file in /etc/cloud/templates/hosts.arch.tmpl
# b.) change or remove the value of 'manage_etc_hosts' in
#     /etc/cloud/cloud.cfg or cloud-config from user-data
#
{# The value '{{hostname}}' will be replaced with the local-hostname -#}
127.0.1.1 {{fqdn}} {{hostname}}
127.0.0.1 localhost

# The following lines are desirable for IPv6 capable hosts
::1 localhost ip6-localhost ip6-loopback
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters

./new-debian13/etc/cloud/templates/hosts.azurelinux.tmpl

## template:jinja
{#
This file /etc/cloud/templates/hosts.azurelinux.tmpl is only utilized
if enabled in cloud-config.  Specifically, in order to enable it
you need to add the following to config:
  manage_etc_hosts: True
-#}
# Your system has configured 'manage_etc_hosts' as True.
# As a result, if you wish for changes to this file to persist
# then you will need to either
# a.) make changes to the master file in /etc/cloud/templates/hosts.azurelinux.tmpl
# b.) change or remove the value of 'manage_etc_hosts' in
#     /etc/cloud/cloud.cfg or cloud-config from user-data
#
# The following lines are desirable for IPv4 capable hosts
127.0.0.1 {{fqdn}} {{hostname}}
127.0.0.1 localhost.localdomain localhost
127.0.0.1 localhost4.localdomain4 localhost4

# The following lines are desirable for IPv6 capable hosts
::1 {{fqdn}} {{hostname}}
::1 localhost6.localdomain6 localhost6

./new-debian13/etc/cloud/templates/hosts.debian.tmpl

## template:jinja
{#
This file (/etc/cloud/templates/hosts.debian.tmpl) is only utilized
if enabled in cloud-config.  Specifically, in order to enable it
you need to add the following to config:
   manage_etc_hosts: True
-#}
# Your system has configured 'manage_etc_hosts' as True.
# As a result, if you wish for changes to this file to persist
# then you will need to either
# a.) make changes to the master file in /etc/cloud/templates/hosts.debian.tmpl
# b.) change or remove the value of 'manage_etc_hosts' in
#     /etc/cloud/cloud.cfg or cloud-config from user-data
#
{# The value '{{hostname}}' will be replaced with the local-hostname -#}
127.0.1.1 {{fqdn}} {{hostname}}
127.0.0.1 localhost

# The following lines are desirable for IPv6 capable hosts
::1 localhost ip6-localhost ip6-loopback
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters

./new-debian13/etc/cloud/templates/hosts.freebsd.tmpl

## template:jinja
{#
This file /etc/cloud/templates/hosts.freebsd.tmpl is only utilized
if enabled in cloud-config.  Specifically, in order to enable it
you need to add the following to config:
  manage_etc_hosts: True
-#}
# Your system has configured 'manage_etc_hosts' as True.
# As a result, if you wish for changes to this file to persist
# then you will need to either
# a.) make changes to the master file in /etc/cloud/templates/hosts.freebsd.tmpl
# b.) change or remove the value of 'manage_etc_hosts' in
#     /etc/cloud/cloud.cfg or cloud-config from user-data

# The following lines are desirable for IPv6 capable hosts
::1 {{fqdn}} {{hostname}}
::1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6

# The following lines are desirable for IPv4 capable hosts
127.0.0.1 {{fqdn}} {{hostname}}
127.0.0.1 localhost.localdomain localhost
127.0.0.1 localhost4.localdomain4 localhost4

./new-debian13/etc/cloud/templates/hosts.gentoo.tmpl

## template:jinja
{#
This file /etc/cloud/templates/hosts.gentoo.tmpl is only utilized
if enabled in cloud-config.  Specifically, in order to enable it
you need to add the following to config:
  manage_etc_hosts: True
-#}
# Your system has configured 'manage_etc_hosts' as True.
# As a result, if you wish for changes to this file to persist
# then you will need to either
# a.) make changes to the master file in /etc/cloud/templates/hosts.gentoo.tmpl
# b.) change or remove the value of 'manage_etc_hosts' in
#     /etc/cloud/cloud.cfg or cloud-config from user-data
#
# The following lines are desirable for IPv4 capable hosts
127.0.0.1 {{fqdn}} {{hostname}}
127.0.0.1 localhost.localdomain localhost
127.0.0.1 localhost4.localdomain4 localhost4

# The following lines are desirable for IPv6 capable hosts
::1 {{fqdn}} {{hostname}}
::1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6

./new-debian13/etc/cloud/templates/hosts.mariner.tmpl

## template:jinja
{#
This file /etc/cloud/templates/hosts.mariner.tmpl is only utilized
if enabled in cloud-config.  Specifically, in order to enable it
you need to add the following to config:
  manage_etc_hosts: True
-#}
# Your system has configured 'manage_etc_hosts' as True.
# As a result, if you wish for changes to this file to persist
# then you will need to either
# a.) make changes to the master file in /etc/cloud/templates/hosts.mariner.tmpl
# b.) change or remove the value of 'manage_etc_hosts' in
#     /etc/cloud/cloud.cfg or cloud-config from user-data
#
# The following lines are desirable for IPv4 capable hosts
127.0.0.1 {{fqdn}} {{hostname}}
127.0.0.1 localhost.localdomain localhost
127.0.0.1 localhost4.localdomain4 localhost4

# The following lines are desirable for IPv6 capable hosts
::1 {{fqdn}} {{hostname}}
::1 localhost6.localdomain6 localhost6

./new-debian13/etc/cloud/templates/hosts.photon.tmpl

## template:jinja
{#
This file /etc/cloud/templates/hosts.photon.tmpl is only utilized
if enabled in cloud-config.  Specifically, in order to enable it
you need to add the following to config:
  manage_etc_hosts: True
-#}
# Your system has configured 'manage_etc_hosts' as True.
# As a result, if you wish for changes to this file to persist
# then you will need to either
# a.) make changes to the master file in /etc/cloud/templates/hosts.photon.tmpl
# b.) change or remove the value of 'manage_etc_hosts' in
#     /etc/cloud/cloud.cfg or cloud-config from user-data
#
# The following lines are desirable for IPv4 capable hosts
127.0.0.1 {{fqdn}} {{hostname}}
127.0.0.1 localhost.localdomain localhost
127.0.0.1 localhost4.localdomain4 localhost4

# The following lines are desirable for IPv6 capable hosts
::1 {{fqdn}} {{hostname}}
::1 localhost6.localdomain6 localhost6

./new-debian13/etc/cloud/templates/hosts.redhat.tmpl

## template:jinja
{#
This file /etc/cloud/templates/hosts.redhat.tmpl is only utilized
if enabled in cloud-config.  Specifically, in order to enable it
you need to add the following to config:
  manage_etc_hosts: True
-#}
# Your system has configured 'manage_etc_hosts' as True.
# As a result, if you wish for changes to this file to persist
# then you will need to either
# a.) make changes to the master file in /etc/cloud/templates/hosts.redhat.tmpl
# b.) change or remove the value of 'manage_etc_hosts' in
#     /etc/cloud/cloud.cfg or cloud-config from user-data
# 
# The following lines are desirable for IPv4 capable hosts
127.0.0.1 {{fqdn}} {{hostname}}
127.0.0.1 localhost.localdomain localhost
127.0.0.1 localhost4.localdomain4 localhost4

# The following lines are desirable for IPv6 capable hosts
::1 {{fqdn}} {{hostname}}
::1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6

./new-debian13/etc/cloud/templates/hosts.suse.tmpl

## template:jinja
{#
This file /etc/cloud/templates/hosts.suse.tmpl is only utilized
if enabled in cloud-config.  Specifically, in order to enable it
you need to add the following to config:
  manage_etc_hosts: True
-#}
# Your system has configured 'manage_etc_hosts' as True.
# As a result, if you wish for changes to this file to persist
# then you will need to either
# a.) make changes to the master file in /etc/cloud/templates/hosts.suse.tmpl
# b.) change or remove the value of 'manage_etc_hosts' in
#     /etc/cloud/cloud.cfg or cloud-config from user-data
#
# The following lines are desirable for IPv4 capable hosts
127.0.1.1 {{fqdn}} {{hostname}}
127.0.0.1 localhost.localdomain localhost
127.0.0.1 localhost4.localdomain4 localhost4

# The following lines are desirable for IPv6 capable hosts
::1 {{fqdn}} {{hostname}}
::1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
::1 localhost ipv6-localhost ipv6-loopback


fe00::0 ipv6-localnet
ff00::0 ipv6-mcastprefix
ff02::1 ipv6-allnodes
ff02::2 ipv6-allrouters
ff02::3 ipv6-allhosts

./new-debian13/etc/cloud/templates/ntp.conf.almalinux.tmpl

## template:jinja

# For more information about this file, see the man pages
# ntp.conf(5), ntp_acc(5), ntp_auth(5), ntp_clock(5), ntp_misc(5), ntp_mon(5).

driftfile /var/lib/ntp/drift

# Permit time synchronization with our time source, but do not
# permit the source to query or modify the service on this system.
restrict default kod nomodify notrap nopeer noquery
restrict -6 default kod nomodify notrap nopeer noquery

# Permit all access over the loopback interface.  This could
# be tightened as well, but to do so would effect some of
# the administrative functions.
restrict 127.0.0.1
restrict -6 ::1

# Hosts on local network are less restricted.
#restrict 192.168.1.0 mask 255.255.255.0 nomodify notrap

# Use public servers from the pool.ntp.org project.
# Please consider joining the pool (http://www.pool.ntp.org/join.html).
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}
{% for peer in peers -%}
peer {{peer}}
{% endfor %}

#broadcast 192.168.1.255 autokey	# broadcast server
#broadcastclient			# broadcast client
#broadcast 224.0.1.1 autokey		# multicast server
#multicastclient 224.0.1.1		# multicast client
#manycastserver 239.255.254.254		# manycast server
#manycastclient 239.255.254.254 autokey # manycast client

# Enable public key cryptography.
#crypto

includefile /etc/ntp/crypto/pw

# Key file containing the keys and key identifiers used when operating
# with symmetric key cryptography.
keys /etc/ntp/keys

# Specify the key identifiers which are trusted.
#trustedkey 4 8 42

# Specify the key identifier to use with the ntpdc utility.
#requestkey 8

# Specify the key identifier to use with the ntpq utility.
#controlkey 8

# Enable writing of statistics records.
#statistics clockstats cryptostats loopstats peerstats

./new-debian13/etc/cloud/templates/ntp.conf.alpine.tmpl

## template:jinja
# /etc/ntp.conf
#
# Configuration for Busybox ntpd - it only supports "server" lines.

{% if servers %}# Servers
{% endif %}
{% for server in servers -%}
server {{server}}
{% endfor %}
{% for peer in peers -%}
peer {{peer}}
{% endfor %}

./new-debian13/etc/cloud/templates/ntp.conf.cloudlinux.tmpl

## template:jinja

# For more information about this file, see the man pages
# ntp.conf(5), ntp_acc(5), ntp_auth(5), ntp_clock(5), ntp_misc(5), ntp_mon(5).

driftfile /var/lib/ntp/drift

# Permit time synchronization with our time source, but do not
# permit the source to query or modify the service on this system.
restrict default kod nomodify notrap nopeer noquery
restrict -6 default kod nomodify notrap nopeer noquery

# Permit all access over the loopback interface.  This could
# be tightened as well, but to do so would effect some of
# the administrative functions.
restrict 127.0.0.1
restrict -6 ::1

# Hosts on local network are less restricted.
#restrict 192.168.1.0 mask 255.255.255.0 nomodify notrap

# Use public servers from the pool.ntp.org project.
# Please consider joining the pool (http://www.pool.ntp.org/join.html).
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}
{% for peer in peers -%}
peer {{peer}}
{% endfor %}

#broadcast 192.168.1.255 autokey	# broadcast server
#broadcastclient			# broadcast client
#broadcast 224.0.1.1 autokey		# multicast server
#multicastclient 224.0.1.1		# multicast client
#manycastserver 239.255.254.254		# manycast server
#manycastclient 239.255.254.254 autokey # manycast client

# Enable public key cryptography.
#crypto

includefile /etc/ntp/crypto/pw

# Key file containing the keys and key identifiers used when operating
# with symmetric key cryptography.
keys /etc/ntp/keys

# Specify the key identifiers which are trusted.
#trustedkey 4 8 42

# Specify the key identifier to use with the ntpdc utility.
#requestkey 8

# Specify the key identifier to use with the ntpq utility.
#controlkey 8

# Enable writing of statistics records.
#statistics clockstats cryptostats loopstats peerstats

./new-debian13/etc/cloud/templates/ntp.conf.debian.tmpl

## template:jinja

# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help

driftfile /var/lib/ntp/ntp.drift

# Enable this if you want statistics to be logged.
#statsdir /var/log/ntpstats/

statistics loopstats peerstats clockstats
filegen loopstats file loopstats type day enable
filegen peerstats file peerstats type day enable
filegen clockstats file clockstats type day enable


# You do need to talk to an NTP server or two (or three).
#server ntp.your-provider.example

# pool.ntp.org maps to about 1000 low-stratum NTP servers.  Your server will
# pick a different set every time it starts up.  Please consider joining the
# pool: <http://www.pool.ntp.org/join.html>
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}
{% for peer in peers -%}
peer {{peer}}
{% endfor %}

# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
# might also be helpful.
#
# Note that "restrict" applies to both servers and clients, so a configuration
# that might be intended to block requests from certain clients could also end
# up blocking replies from your own upstream servers.

# By default, exchange time with everybody, but don't allow configuration.
restrict -4 default kod notrap nomodify nopeer noquery limited
restrict -6 default kod notrap nomodify nopeer noquery limited

# Local users may interrogate the ntp server more closely.
restrict 127.0.0.1
restrict ::1

# Needed for adding pool entries
restrict source notrap nomodify noquery

# Clients from this (example!) subnet have unlimited access, but only if
# cryptographically authenticated.
#restrict 192.168.123.0 mask 255.255.255.0 notrust


# If you want to provide time to your local subnet, change the next line.
# (Again, the address is an example only.)
#broadcast 192.168.123.255

# If you want to listen to time broadcasts on your local subnet, de-comment the
# next lines.  Please do this only if you trust everybody on the network!
#disable auth
#broadcastclient

./new-debian13/etc/cloud/templates/ntp.conf.fedora.tmpl

## template:jinja

# For more information about this file, see the man pages
# ntp.conf(5), ntp_acc(5), ntp_auth(5), ntp_clock(5), ntp_misc(5), ntp_mon(5).

driftfile /var/lib/ntp/drift

# Permit time synchronization with our time source, but do not
# permit the source to query or modify the service on this system.
restrict default nomodify notrap nopeer noquery

# Permit all access over the loopback interface.  This could
# be tightened as well, but to do so would effect some of
# the administrative functions.
restrict 127.0.0.1 
restrict ::1

# Hosts on local network are less restricted.
#restrict 192.168.1.0 mask 255.255.255.0 nomodify notrap

# Use public servers from the pool.ntp.org project.
# Please consider joining the pool (http://www.pool.ntp.org/join.html).
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}
{% for peer in peers -%}
peer {{peer}}
{% endfor %}

#broadcast 192.168.1.255 autokey	# broadcast server
#broadcastclient			# broadcast client
#broadcast 224.0.1.1 autokey		# multicast server
#multicastclient 224.0.1.1		# multicast client
#manycastserver 239.255.254.254		# manycast server
#manycastclient 239.255.254.254 autokey # manycast client

# Enable public key cryptography.
#crypto

includefile /etc/ntp/crypto/pw

# Key file containing the keys and key identifiers used when operating
# with symmetric key cryptography. 
keys /etc/ntp/keys

# Specify the key identifiers which are trusted.
#trustedkey 4 8 42

# Specify the key identifier to use with the ntpdc utility.
#requestkey 8

# Specify the key identifier to use with the ntpq utility.
#controlkey 8

# Enable writing of statistics records.
#statistics clockstats cryptostats loopstats peerstats

# Disable the monitoring facility to prevent amplification attacks using ntpdc
# monlist command when default restrict does not include the noquery flag. See
# CVE-2013-5211 for more details.
# Note: Monitoring will not be disabled with the limited restriction flag.
disable monitor

./new-debian13/etc/cloud/templates/ntp.conf.freebsd.tmpl

## template:jinja

#
# $FreeBSD$
#
# Default NTP servers for the FreeBSD operating system.
#
# Don't forget to enable ntpd in /etc/rc.conf with:
# ntpd_enable="YES"
#
# The driftfile is by default /var/db/ntpd.drift, check
# /etc/defaults/rc.conf on how to change the location.
#

#
# Set the target and limit for adding servers configured via pool statements
# or discovered dynamically via mechanisms such as broadcast and manycast.
# Ntpd automatically adds maxclock-1 servers from configured pools, and may
# add as many as maxclock*2 if necessary to ensure that at least minclock
# servers are providing good consistent time.
#
tos minclock 3 maxclock 6

#
# The following pool statements will give you a random set of IPv4 and IPv6
# NTP servers geographically close to you.  A single pool statement adds
# multiple servers from the pool, according to the tos minclock/maxclock
# targets.
# See http://www.pool.ntp.org/ for details.  Note, pool.ntp.org encourages
# users with a static IP and good upstream NTP servers to add a server
# to the pool.  See http://www.pool.ntp.org/join.html if you are interested.
#
# The option `iburst' is used for faster initial synchronization.
#
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{% for peer in peers -%}
peer {{peer}}
{% endfor %}

#
# To configure a specific server, such as an organization-wide local
# server, add lines similar to the following.  One or more specific
# servers can be configured in addition to, or instead of, any server
# pools specified above.  When both are configured, ntpd first adds all
# the specific servers, then adds servers from the pool until the tos
# minclock/maxclock targets are met.
#
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}

#
# Security:
#
# By default, only allow time queries and block all other requests
# from unauthenticated clients.
#
# The "restrict source" line allows peers to be mobilized when added by
# ntpd from a pool, but does not enable mobilizing a new peer association
# by other dynamic means (broadcast, manycast, ntpq commands, etc).
#
# See http://support.ntp.org/bin/view/Support/AccessRestrictions
# for more information.
#
restrict default limited kod nomodify notrap noquery nopeer
restrict source  limited kod nomodify notrap noquery

#
# Alternatively, the following rules would block all unauthorized access.
#
#restrict default ignore
#
# In this case, all remote NTP time servers also need to be explicitly
# allowed or they would not be able to exchange time information with
# this server.
#
# Please note that this example doesn't work for the servers in
# the pool.ntp.org domain since they return multiple A records.
#
#restrict 0.pool.ntp.org nomodify nopeer noquery notrap
#restrict 1.pool.ntp.org nomodify nopeer noquery notrap
#restrict 2.pool.ntp.org nomodify nopeer noquery notrap
#
# The following settings allow unrestricted access from the localhost
restrict 127.0.0.1
restrict ::1

#
# If a server loses sync with all upstream servers, NTP clients
# no longer follow that server. The local clock can be configured
# to provide a time source when this happens, but it should usually
# be configured on just one server on a network. For more details see
# http://support.ntp.org/bin/view/Support/UndisciplinedLocalClock
# The use of Orphan Mode may be preferable.
#
#server 127.127.1.0
#fudge 127.127.1.0 stratum 10

# See http://support.ntp.org/bin/view/Support/ConfiguringNTP#Section_6.14.
# for documentation regarding leapfile. Updates to the file can be obtained
# from ftp://time.nist.gov/pub/ or ftp://tycho.usno.navy.mil/pub/ntp/.
# Use either leapfile in /etc/ntp or periodically updated leapfile in /var/db.
#leapfile "/etc/ntp/leap-seconds"
leapfile "/var/db/ntpd.leap-seconds.list"

# Specify the number of megabytes of memory that should be allocated and
# locked. -1 (default) means "do not lock the process into memory".
# 0 means "lock whatever memory the process wants into memory". Any other
# number means to lock up to that number of megabytes into memory.
# 0 may result in a segfault when ASLR with stack gap randomization
# is enabled.
#rlimit memlock 32

./new-debian13/etc/cloud/templates/ntp.conf.opensuse.tmpl

## template:jinja

##
## Radio and modem clocks by convention have addresses in the 
## form 127.127.t.u, where t is the clock type and u is a unit 
## number in the range 0-3. 
##
## Most of these clocks require support in the form of a 
## serial port or special bus peripheral. The particular  
## device is normally specified by adding a soft link 
## /dev/device-u to the particular hardware device involved, 
## where u correspond to the unit number above. 
## 
## Generic DCF77 clock on serial port (Conrad DCF77)
## Address:     127.127.8.u
## Serial Port: /dev/refclock-u
##  
## (create soft link /dev/refclock-0 to the particular ttyS?)
##
# server 127.127.8.0 mode 5 prefer

##
## Undisciplined Local Clock. This is a fake driver intended for backup
## and when no outside source of synchronized time is available.
##
# server 127.127.1.0		# local clock (LCL)
# fudge  127.127.1.0 stratum 10	# LCL is unsynchronized

##
## Add external Servers using
## # rcntpd addserver <yourserver>
## The servers will only be added to the currently running instance, not
## to /etc/ntp.conf.
##
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}
{% for peer in peers -%}
peer {{peer}}
{% endfor %}

# Access control configuration; see /usr/share/doc/packages/ntp/html/accopt.html for
# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
# might also be helpful.
#
# Note that "restrict" applies to both servers and clients, so a configuration
# that might be intended to block requests from certain clients could also end
# up blocking replies from your own upstream servers.

# By default, exchange time with everybody, but don't allow configuration.
restrict -4 default notrap nomodify nopeer noquery
restrict -6 default notrap nomodify nopeer noquery

# Local users may interrogate the ntp server more closely.
restrict 127.0.0.1
restrict ::1

# Clients from this (example!) subnet have unlimited access, but only if
# cryptographically authenticated.
#restrict 192.168.123.0 mask 255.255.255.0 notrust

##
## Miscellaneous stuff
##

driftfile /var/lib/ntp/drift/ntp.drift # path for drift file

logfile   /var/log/ntp		# alternate log file
# logconfig =syncstatus + sysevents
# logconfig =all

# statsdir /tmp/		# directory for statistics files
# filegen peerstats  file peerstats  type day enable
# filegen loopstats  file loopstats  type day enable
# filegen clockstats file clockstats type day enable

#
# Authentication stuff
#
keys /etc/ntp.keys		# path for keys file
trustedkey 1			# define trusted keys
requestkey 1			# key (7) for accessing server variables
controlkey 1			# key (6) for accessing server variables

./new-debian13/etc/cloud/templates/ntp.conf.photon.tmpl

## template:jinja

# For more information about this file, see the man pages
# ntp.conf(5), ntp_acc(5), ntp_auth(5), ntp_clock(5), ntp_misc(5), ntp_mon(5).

driftfile /var/lib/ntp/drift

# Permit time synchronization with our time source, but do not
# permit the source to query or modify the service on this system.
restrict default kod nomodify notrap nopeer noquery
restrict -6 default kod nomodify notrap nopeer noquery

# Permit all access over the loopback interface.  This could
# be tightened as well, but to do so would effect some of
# the administrative functions.
restrict 127.0.0.1
restrict -6 ::1

# Hosts on local network are less restricted.
#restrict 192.168.1.0 mask 255.255.255.0 nomodify notrap

# Use public servers from the pool.ntp.org project.
# Please consider joining the pool (http://www.pool.ntp.org/join.html).
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}
{% for peer in peers -%}
peer {{peer}}
{% endfor %}

#broadcast 192.168.1.255 autokey	# broadcast server
#broadcastclient			# broadcast client
#broadcast 224.0.1.1 autokey		# multicast server
#multicastclient 224.0.1.1		# multicast client
#manycastserver 239.255.254.254		# manycast server
#manycastclient 239.255.254.254 autokey # manycast client

# Enable public key cryptography.
#crypto

includefile /etc/ntp/crypto/pw

# Key file containing the keys and key identifiers used when operating
# with symmetric key cryptography.
keys /etc/ntp/keys

# Specify the key identifiers which are trusted.
#trustedkey 4 8 42

# Specify the key identifier to use with the ntpdc utility.
#requestkey 8

# Specify the key identifier to use with the ntpq utility.
#controlkey 8

# Enable writing of statistics records.
#statistics clockstats cryptostats loopstats peerstats

./new-debian13/etc/cloud/templates/ntp.conf.rhel.tmpl

## template:jinja

# For more information about this file, see the man pages
# ntp.conf(5), ntp_acc(5), ntp_auth(5), ntp_clock(5), ntp_misc(5), ntp_mon(5).

driftfile /var/lib/ntp/drift

# Permit time synchronization with our time source, but do not
# permit the source to query or modify the service on this system.
restrict default kod nomodify notrap nopeer noquery
restrict -6 default kod nomodify notrap nopeer noquery

# Permit all access over the loopback interface.  This could
# be tightened as well, but to do so would effect some of
# the administrative functions.
restrict 127.0.0.1 
restrict -6 ::1

# Hosts on local network are less restricted.
#restrict 192.168.1.0 mask 255.255.255.0 nomodify notrap

# Use public servers from the pool.ntp.org project.
# Please consider joining the pool (http://www.pool.ntp.org/join.html).
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}
{% for peer in peers -%}
peer {{peer}}
{% endfor %}

#broadcast 192.168.1.255 autokey	# broadcast server
#broadcastclient			# broadcast client
#broadcast 224.0.1.1 autokey		# multicast server
#multicastclient 224.0.1.1		# multicast client
#manycastserver 239.255.254.254		# manycast server
#manycastclient 239.255.254.254 autokey # manycast client

# Enable public key cryptography.
#crypto

includefile /etc/ntp/crypto/pw

# Key file containing the keys and key identifiers used when operating
# with symmetric key cryptography. 
keys /etc/ntp/keys

# Specify the key identifiers which are trusted.
#trustedkey 4 8 42

# Specify the key identifier to use with the ntpdc utility.
#requestkey 8

# Specify the key identifier to use with the ntpq utility.
#controlkey 8

# Enable writing of statistics records.
#statistics clockstats cryptostats loopstats peerstats

./new-debian13/etc/cloud/templates/ntp.conf.rocky.tmpl

## template:jinja

# For more information about this file, see the man pages
# ntp.conf(5), ntp_acc(5), ntp_auth(5), ntp_clock(5), ntp_misc(5), ntp_mon(5).

driftfile /var/lib/ntp/drift

# Permit time synchronization with our time source, but do not
# permit the source to query or modify the service on this system.
restrict default kod nomodify notrap nopeer noquery
restrict -6 default kod nomodify notrap nopeer noquery

# Permit all access over the loopback interface.  This could
# be tightened as well, but to do so would effect some of
# the administrative functions.
restrict 127.0.0.1
restrict -6 ::1

# Hosts on local network are less restricted.
#restrict 192.168.1.0 mask 255.255.255.0 nomodify notrap

# Use public servers from the pool.ntp.org project.
# Please consider joining the pool (http://www.pool.ntp.org/join.html).
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}
{% for peer in peers -%}
peer {{peer}}
{% endfor %}

#broadcast 192.168.1.255 autokey	# broadcast server
#broadcastclient			# broadcast client
#broadcast 224.0.1.1 autokey		# multicast server
#multicastclient 224.0.1.1		# multicast client
#manycastserver 239.255.254.254		# manycast server
#manycastclient 239.255.254.254 autokey # manycast client

# Enable public key cryptography.
#crypto

includefile /etc/ntp/crypto/pw

# Key file containing the keys and key identifiers used when operating
# with symmetric key cryptography.
keys /etc/ntp/keys

# Specify the key identifiers which are trusted.
#trustedkey 4 8 42

# Specify the key identifier to use with the ntpdc utility.
#requestkey 8

# Specify the key identifier to use with the ntpq utility.
#controlkey 8

# Enable writing of statistics records.
#statistics clockstats cryptostats loopstats peerstats

./new-debian13/etc/cloud/templates/ntp.conf.sles.tmpl

## template:jinja

##
## Radio and modem clocks by convention have addresses in the 
## form 127.127.t.u, where t is the clock type and u is a unit 
## number in the range 0-3. 
##
## Most of these clocks require support in the form of a 
## serial port or special bus peripheral. The particular  
## device is normally specified by adding a soft link 
## /dev/device-u to the particular hardware device involved, 
## where u correspond to the unit number above. 
## 
## Generic DCF77 clock on serial port (Conrad DCF77)
## Address:     127.127.8.u
## Serial Port: /dev/refclock-u
##  
## (create soft link /dev/refclock-0 to the particular ttyS?)
##
# server 127.127.8.0 mode 5 prefer

##
## Undisciplined Local Clock. This is a fake driver intended for backup
## and when no outside source of synchronized time is available.
##
# server 127.127.1.0		# local clock (LCL)
# fudge  127.127.1.0 stratum 10	# LCL is unsynchronized

##
## Add external Servers using
## # rcntpd addserver <yourserver>
## The servers will only be added to the currently running instance, not
## to /etc/ntp.conf.
##
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}
{% for peer in peers -%}
peer {{peer}}
{% endfor %}

# Access control configuration; see /usr/share/doc/packages/ntp/html/accopt.html for
# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
# might also be helpful.
#
# Note that "restrict" applies to both servers and clients, so a configuration
# that might be intended to block requests from certain clients could also end
# up blocking replies from your own upstream servers.

# By default, exchange time with everybody, but don't allow configuration.
restrict -4 default notrap nomodify nopeer noquery
restrict -6 default notrap nomodify nopeer noquery

# Local users may interrogate the ntp server more closely.
restrict 127.0.0.1
restrict ::1

# Clients from this (example!) subnet have unlimited access, but only if
# cryptographically authenticated.
#restrict 192.168.123.0 mask 255.255.255.0 notrust

##
## Miscellaneous stuff
##

driftfile /var/lib/ntp/drift/ntp.drift # path for drift file

logfile   /var/log/ntp		# alternate log file
# logconfig =syncstatus + sysevents
# logconfig =all

# statsdir /tmp/		# directory for statistics files
# filegen peerstats  file peerstats  type day enable
# filegen loopstats  file loopstats  type day enable
# filegen clockstats file clockstats type day enable

#
# Authentication stuff
#
keys /etc/ntp.keys		# path for keys file
trustedkey 1			# define trusted keys
requestkey 1			# key (7) for accessing server variables
controlkey 1			# key (6) for accessing server variables

./new-debian13/etc/cloud/templates/ntp.conf.ubuntu.tmpl

## template:jinja

# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help

driftfile /var/lib/ntp/ntp.drift

# Enable this if you want statistics to be logged.
#statsdir /var/log/ntpstats/

statistics loopstats peerstats clockstats
filegen loopstats file loopstats type day enable
filegen peerstats file peerstats type day enable
filegen clockstats file clockstats type day enable

# Specify one or more NTP servers.

# Use servers from the NTP Pool Project. Approved by Ubuntu Technical Board
# on 2011-02-08 (LP: #104525). See http://www.pool.ntp.org/join.html for
# more information.
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}
{% for peer in peers -%}
peer {{peer}}
{% endfor %}

# Use Ubuntu's ntp server as a fallback.
# pool ntp.ubuntu.com

# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
# might also be helpful.
#
# Note that "restrict" applies to both servers and clients, so a configuration
# that might be intended to block requests from certain clients could also end
# up blocking replies from your own upstream servers.

# By default, exchange time with everybody, but don't allow configuration.
restrict -4 default kod notrap nomodify nopeer noquery limited
restrict -6 default kod notrap nomodify nopeer noquery limited

# Local users may interrogate the ntp server more closely.
restrict 127.0.0.1
restrict ::1

# Needed for adding pool entries
restrict source notrap nomodify noquery

# Clients from this (example!) subnet have unlimited access, but only if
# cryptographically authenticated.
#restrict 192.168.123.0 mask 255.255.255.0 notrust


# If you want to provide time to your local subnet, change the next line.
# (Again, the address is an example only.)
#broadcast 192.168.123.255

# If you want to listen to time broadcasts on your local subnet, de-comment the
# next lines.  Please do this only if you trust everybody on the network!
#disable auth
#broadcastclient

#Changes required to use pps synchronisation as explained in documentation:
#http://www.ntp.org/ntpfaq/NTP-s-config-adv.htm#AEN3918

#server 127.127.8.1 mode 135 prefer    # Meinberg GPS167 with PPS
#fudge 127.127.8.1 time1 0.0042        # relative to PPS for my hardware

#server 127.127.22.1                   # ATOM(PPS)
#fudge 127.127.22.1 flag3 1            # enable PPS API

./new-debian13/etc/cloud/templates/ntpd.conf.openbsd.tmpl

## template:jinja

# $OpenBSD: ntpd.conf,v 1.16 2019/11/06 19:04:12 deraadt Exp $
#
# See ntpd.conf(5) and /etc/examples/ntpd.conf

{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
servers {{pool}}
{% endfor %}
{% for server in servers -%}# servers
server {{server}}
{% endfor %}
{% for peer in peers -%}
peer {{peer}}
{% endfor %}
sensor *

constraint from "9.9.9.9"              # quad9 v4 without DNS
constraint from "2620:fe::fe"          # quad9 v6 without DNS
constraints from "www.google.com"      # intentionally not 8.8.8.8

./new-debian13/etc/cloud/templates/resolv.conf.tmpl

## template:jinja
# Your system has been configured with 'manage-resolv-conf' set to true.
# As a result, cloud-init has written this file with configuration data
# that it has been provided. Cloud-init, by default, will write this file
# a single time (PER_ONCE).
#
{% if nameservers is defined %}
{% for server in nameservers %}
nameserver {{server}}
{% endfor %}

{% endif -%}
{% if searchdomains is defined %}
search {% for search in searchdomains %}{{search}} {% endfor %}

{% endif %}
{% if domain is defined %}
domain {{domain}}
{% endif %}
{% if sortlist is defined %}

sortlist {% for sort in sortlist %}{{sort}} {% endfor %}
{% endif %}
{#
    Flags and options are required to be on the
    same line preceded by "options" keyword
#}
{% if options or flags %}

options
{%- for flag in flags %}
 {{flag-}}
{% endfor %}

{%- for key, value in options.items()|sort %}
 {{key}}:{{value-}}
{% endfor %}
{% endif %}

./new-debian13/etc/cloud/templates/sources.list.debian.deb822.tmpl

## template:jinja
## Note, this file is written by cloud-init on first boot of an instance
## modifications made here will not survive a re-bundle.
## if you wish to make changes you can:
## a.) add 'apt_preserve_sources_list: true' to /etc/cloud/cloud.cfg
##     or do the same in user-data
## b.) add supplemental sources in /etc/apt/sources.list.d
## c.) make changes to template file
##      /etc/cloud/templates/sources.list.debian.deb822.tmpl

# For how to upgrade to newer versions of the distribution, see:
# http://www.debian.org/releases/stable/i386/release-notes/ch-upgrading.html

## See the sources.list(5) manual page for further settings.

## Comment any of the following Suites to avoid getting updates from the
## specific Suite.
##
## N.B. software from {{codename}}-backports repository may not have been
## tested as extensively as that contained in the main release, although it
## includes newer versions of some applications which may provide useful
## features.
Types: deb deb-src
URIs: {{mirror}}
Suites: {{codename}} {{codename}}-updates {{codename}}-backports
Components: main
Signed-By: {{primary_key | default('/usr/share/keyrings/debian-archive-keyring.gpg', true)}}

## Major bug fix updates produced after the final release of the distribution.
Types: deb deb-src
URIs: {{security}}
Suites: {{codename}}{% if codename in ('buster', 'stretch') %}/updates{% else %}-security{% endif +%}
Components: main
Signed-By: {{security_key | default(primary_key, true) | default('/usr/share/keyrings/debian-archive-keyring.gpg', true)}}

./new-debian13/etc/cloud/templates/sources.list.debian.tmpl

## template:jinja
## Note, this file is written by cloud-init on first boot of an instance
## modifications made here will not survive a re-bundle.
## if you wish to make changes you can:
## a.) add 'apt_preserve_sources_list: true' to /etc/cloud/cloud.cfg
##     or do the same in user-data
## b.) add sources in /etc/apt/sources.list.d
## c.) make changes to template file /etc/cloud/templates/sources.list.debian.tmpl
###

# See http://www.debian.org/releases/stable/i386/release-notes/ch-upgrading.html
# for how to upgrade to newer versions of the distribution.
deb {{mirror}} {{codename}} main
deb-src {{mirror}} {{codename}} main

## Major bug fix updates produced after the final release of the
## distribution.
deb {{security}} {{codename}}{% if codename in ('buster', 'stretch') %}/updates{% else %}-security{% endif %} main
deb-src {{security}} {{codename}}{% if codename in ('buster', 'stretch') %}/updates{% else %}-security{% endif %} main
deb {{mirror}} {{codename}}-updates main
deb-src {{mirror}} {{codename}}-updates main

## Uncomment the following two lines to add software from the 'backports'
## repository.
## 
## N.B. software from this repository may not have been tested as
## extensively as that contained in the main release, although it includes
## newer versions of some applications which may provide useful features.
deb {{mirror}} {{codename}}-backports main
deb-src {{mirror}} {{codename}}-backports main

./new-debian13/etc/cloud/templates/sources.list.ubuntu.deb822.tmpl

## template:jinja
## Note, this file is written by cloud-init on first boot of an instance
## modifications made here will not survive a re-bundle.
##
## If you wish to make changes you can:
## a.) add 'apt_preserve_sources_list: true' to /etc/cloud/cloud.cfg
##     or do the same in user-data
## b.) add supplemental sources in /etc/apt/sources.list.d
## c.) make changes to template file
##      /etc/cloud/templates/sources.list.ubuntu.deb822.tmpl
##

# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.

## Ubuntu distribution repository
##
## The following settings can be adjusted to configure which packages to use from Ubuntu.
## Mirror your choices (except for URIs and Suites) in the security section below to
## ensure timely security updates.
##
## Types: Append deb-src to enable the fetching of source package.
## URIs: A URL to the repository (you may add multiple URLs)
## Suites: The following additional suites can be configured
##   <name>-updates   - Major bug fix updates produced after the final release of the
##                      distribution.
##   <name>-backports - software from this repository may not have been tested as
##                      extensively as that contained in the main release, although it includes
##                      newer versions of some applications which may provide useful features.
##                      Also, please note that software in backports WILL NOT receive any review
##                      or updates from the Ubuntu security team.
## Components: Aside from main, the following components can be added to the list
##   restricted  - Software that may not be under a free license, or protected by patents.
##   universe    - Community maintained packages. Software in this repository receives maintenance
##                 from volunteers in the Ubuntu community, or a 10 year security maintenance
##                 commitment from Canonical when an Ubuntu Pro subscription is attached.
##   multiverse  - Community maintained of restricted. Software from this repository is
##                 ENTIRELY UNSUPPORTED by the Ubuntu team, and may not be under a free
##                 licence. Please satisfy yourself as to your rights to use the software.
##                 Also, please note that software in multiverse WILL NOT receive any
##                 review or updates from the Ubuntu security team.
##
## See the sources.list(5) manual page for further settings.
Types: deb
URIs: {{mirror}}
Suites: {{codename}} {{codename}}-updates {{codename}}-backports
Components: main universe restricted multiverse
Signed-By: {{primary_key | default('/usr/share/keyrings/ubuntu-archive-keyring.gpg', true)}}

## Ubuntu security updates. Aside from URIs and Suites,
## this should mirror your choices in the previous section.
Types: deb
URIs: {{security}}
Suites: {{codename}}-security
Components: main universe restricted multiverse
Signed-By: {{security_key | default(primary_key, true) | default('/usr/share/keyrings/ubuntu-archive-keyring.gpg', true)}}

./new-debian13/etc/cloud/templates/sources.list.ubuntu.tmpl

## template:jinja
## Note, this file is written by cloud-init on first boot of an instance
## modifications made here will not survive a re-bundle.
## if you wish to make changes you can:
## a.) add 'apt_preserve_sources_list: true' to /etc/cloud/cloud.cfg
##     or do the same in user-data
## b.) add sources in /etc/apt/sources.list.d
## c.) make changes to template file /etc/cloud/templates/sources.list.tmpl

# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
deb {{mirror}} {{codename}} main restricted
# deb-src {{mirror}} {{codename}} main restricted

## Major bug fix updates produced after the final release of the
## distribution.
deb {{mirror}} {{codename}}-updates main restricted
# deb-src {{mirror}} {{codename}}-updates main restricted

## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team. Also, please note that software in universe WILL NOT receive any
## review or updates from the Ubuntu security team.
deb {{mirror}} {{codename}} universe
# deb-src {{mirror}} {{codename}} universe
deb {{mirror}} {{codename}}-updates universe
# deb-src {{mirror}} {{codename}}-updates universe

## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team, and may not be under a free licence. Please satisfy yourself as to
## your rights to use the software. Also, please note that software in
## multiverse WILL NOT receive any review or updates from the Ubuntu
## security team.
deb {{mirror}} {{codename}} multiverse
# deb-src {{mirror}} {{codename}} multiverse
deb {{mirror}} {{codename}}-updates multiverse
# deb-src {{mirror}} {{codename}}-updates multiverse

## N.B. software from this repository may not have been tested as
## extensively as that contained in the main release, although it includes
## newer versions of some applications which may provide useful features.
## Also, please note that software in backports WILL NOT receive any review
## or updates from the Ubuntu security team.
deb {{mirror}} {{codename}}-backports main restricted universe multiverse
# deb-src {{mirror}} {{codename}}-backports main restricted universe multiverse

deb {{security}} {{codename}}-security main restricted
# deb-src {{security}} {{codename}}-security main restricted
deb {{security}} {{codename}}-security universe
# deb-src {{security}} {{codename}}-security universe
deb {{security}} {{codename}}-security multiverse
# deb-src {{security}} {{codename}}-security multiverse

./new-debian13/etc/cloud/templates/systemd.resolved.conf.tmpl

## template:jinja
# Your system has been configured with 'manage-resolv-conf' set to true.
# As a result, cloud-init has written this file with configuration data
# that it has been provided. Cloud-init, by default, will write this file
# a single time (PER_ONCE).
#
[Resolve]
LLMNR=false
{% if nameservers is defined %}
DNS={% for server in nameservers %}{{server}} {% endfor %}
{% endif %}

{% if searchdomains is defined %}
Domains={% for search in searchdomains %}{{search}} {% endfor %}
{% endif %}

./new-debian13/etc/cloud/templates/timesyncd.conf.tmpl

## template:jinja
# cloud-init generated file
# See timesyncd.conf(5) for details.

[Time]
{% if servers or pools -%}
NTP={% for host in servers|list + pools|list %}{{ host }} {% endfor -%}
{% endif -%}

./new-debian13/etc/debian_version

13.7

./new-debian13/etc/default/grub

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT=""
GRUB_CMDLINE_LINUX="console=tty0 console=ttyS0,115200 earlyprintk=ttyS0,115200 consoleblank=0"
GRUB_TERMINAL_OUTPUT="gfxterm serial"
GRUB_SERIAL_COMMAND="serial --speed=115200"

./new-debian13/etc/default/grub.d/10_cloud.cfg

# Use PARTUUID instead of UUID for root=
GRUB_DISABLE_LINUX_UUID=true
GRUB_DISABLE_LINUX_PARTUUID=

./new-debian13/etc/default/grub.d/15_timeout.cfg

GRUB_TIMEOUT=0

./new-debian13/etc/dhcp/debug

#
# The purpose of this script is just to show the variables that are
# available to all the scripts in this directory. All these scripts are
# called from dhclient-script, which exports all the variables shown
# before. If you want to debug a problem with your DHCP setup you can
# enable this script and take a look at /tmp/dhclient-script.debug.

# To enable this script set the following variable to "yes"
RUN="no"

if [ "$RUN" = "yes" ]; then
	echo "$(date): entering ${1%/*}, dumping variables." \
		>> /tmp/dhclient-script.debug

	# loop over the 4 possible prefixes: (empty), cur_, new_, old_
	for prefix in '' 'cur_' 'new_' 'old_'; do
		# loop over the DHCP variables passed to dhclient-script
		for basevar in reason interface medium alias_ip_address \
			       ip_address host_name network_number subnet_mask \
			       broadcast_address routers static_routes \
			       rfc3442_classless_static_routes \
			       domain_name domain_search domain_name_servers \
			       netbios_name_servers netbios_scope \
			       ntp_servers \
			       ip6_address ip6_prefix ip6_prefixlen \
			       dhcp6_domain_search dhcp6_name_servers ; do
			var="${prefix}${basevar}"
			eval "content=\$$var"

			# show only variables with values set
			if [ -n "${content}" ]; then
				echo "$var='${content}'" >> /tmp/dhclient-script.debug
			fi
		done
	done

	echo '--------------------------' >> /tmp/dhclient-script.debug
fi

./new-debian13/etc/dhcp/dhclient-enter-hooks.d/resolved-enter

#!/bin/sh
## Sourced, not exec'ed, but helps syntax highlighting
#
# Script fragment disabling make_resolv_conf(),
# to be used in conjunction with dhclient-exit-hooks.d/resolved
#

if systemctl is-enabled systemd-resolved > /dev/null 2>&1; then
    # Undefine the nasty default make_resolv_conf() to avoid it overriding
    # /etc/resolv.conf (or /run/systemd/resolve/stub-resolv.conf)
    make_resolv_conf() { : ; }
fi

./new-debian13/etc/dhcp/dhclient-exit-hooks.d/hook-dhclient

#!/bin/sh
# This file is part of cloud-init. See LICENSE file for license information.

# This script writes DHCP lease information into the cloud-init run directory
# It is sourced, not executed.  For more information see dhclient-script(8).

is_azure() {
    local dmi_path="/sys/class/dmi/id/board_vendor" vendor=""
    if [ -e "$dmi_path" ] && read vendor < "$dmi_path"; then
        [ "$vendor" = "Microsoft Corporation" ] && return 0
    fi
    return 1
}

is_enabled() {
    # only execute hooks if cloud-init is enabled and on azure
    [ -e /run/cloud-init/enabled ] || return 1
    is_azure
}

if is_enabled; then
   case "$reason" in
      BOUND) cloud-init dhclient-hook up "$interface";;
      DOWN|RELEASE|REBOOT|STOP|EXPIRE)
         cloud-init dhclient-hook down "$interface";;
   esac
fi

./new-debian13/etc/dhcp/dhclient-exit-hooks.d/resolved

#!/bin/sh
## Sourced, not exec'ed, but helps syntax highlighting
#
# Script fragment to make dhclient supply nameserver information to resolved
#

# Tips:
# * Be careful about changing the environment since this is sourced
# * This script fragment uses bash features
# * As of isc-dhcp-client 4.2 the "reason" (for running the script) can be one of the following.
#   (Listed on man page:) MEDIUM(0) PREINIT(0)  BOUND(M)  RENEW(M)  REBIND(M)  REBOOT(M)         EXPIRE(D)  FAIL(D) RELEASE(D)  STOP(D) NBI(-) TIMEOUT(M)
#   (Also used in master script:)                                                                                                                         ARPCHECK(0), ARPSEND(0)
#   (Also used in master script:)   PREINIT6(0) BOUND6(M) RENEW6(M) REBIND6(M)        DEPREF6(0) EXPIRE6(D)         RELEASE6(D) STOP6(D)
#   (0) = master script does not run make_resolv_conf
#   (M) = master script runs make_resolv_conf
#   (D) = master script downs interface
#   (-) = master script does nothing with this

if systemctl is-enabled systemd-resolved > /dev/null 2>&1; then
    local mystatedir statedir ifindex

    if [ ! "$interface" ] ; then
        return
    fi
    ifindex=$(cat "/sys/class/net/$interface/ifindex")
    if [ ! "$ifindex" ]; then
        return
    fi
    mystatedir=/run/network
    mkdir -p $mystatedir

    statedir=/run/systemd/resolve/netif
    mkdir -p $statedir
    chown systemd-resolve:systemd-resolve $statedir

    local oldstate="$(mktemp)"
    # ignore errors due to nonexistent file
    md5sum "$mystatedir/isc-dhcp-v4-$interface" "$mystatedir/isc-dhcp-v6-$interface" "$mystatedir/ifupdown-inet-$interface" "$mystatedir/ifupdown-inet6-$interface" > "$oldstate" 2> /dev/null || true

    case "$reason" in
      BOUND|RENEW|REBIND|REBOOT|TIMEOUT|BOUND6|RENEW6|REBIND6)
        if [ -n "$new_domain_name_servers" ] ; then
            cat <<EOF >"$mystatedir/isc-dhcp-v4-$interface"
DNS="$new_domain_name_servers"
EOF
            if [ -n "$new_domain_name" ] || [ -n "$new_domain_search" ] ; then
                cat <<EOF >>"$mystatedir/isc-dhcp-v4-$interface"
DOMAINS="$new_domain_search $new_domain_name"
EOF
            fi
        fi
        if [ -n "$new_dhcp6_name_servers" ] ; then
            cat <<EOF >"$mystatedir/isc-dhcp-v6-$interface"
DNS6="$new_dhcp6_name_servers"
EOF
            if [ -n "$new_dhcp6_domain_search" ] ; then
                cat <<EOF >>"$mystatedir/isc-dhcp-v6-$interface"
DOMAINS6="$new_dhcp6_domain_search"
EOF
            fi
        fi
        ;;

      EXPIRE|FAIL|RELEASE|STOP)
        rm -f "/run/network/isc-dhcp-v4-$interface"
        ;;
      EXPIRE6|RELEASE6|STOP6)
        rm -f "/run/network/isc-dhcp-v6-$interface"
        ;;
    esac

    local newstate="$(mktemp)"
    # ignore errors due to nonexistent file
    md5sum "$mystatedir/isc-dhcp-v4-$interface" "$mystatedir/isc-dhcp-v6-$interface" "$mystatedir/ifupdown-inet-$interface" "$mystatedir/ifupdown-inet6-$interface" > "$newstate" 2> /dev/null || true
    if ! cmp --silent "$oldstate" "$newstate" 2>/dev/null; then
        local DNS DNS6 DOMAINS DOMAINS6 DEFAULT_ROUTE
        # v4 first
        if [ -e "$mystatedir/isc-dhcp-v4-$interface" ]; then
            . "$mystatedir/isc-dhcp-v4-$interface"
        fi
        # v4 manual config overrides
        if [ -e "$mystatedir/ifupdown-inet-$interface" ]; then
            . "$mystatedir/ifupdown-inet-$interface"
        fi
        # v6 preffered
        if [ -e "$mystatedir/isc-dhcp-v6-$interface" ]; then
            . "$mystatedir/isc-dhcp-v6-$interface"
        fi
        # v6 manual config overrides
        if [ -e "$mystatedir/ifupdown-inet6-$interface" ]; then
            . "$mystatedir/ifupdown-inet6-$interface"
        fi
        local resolvectl_failed=
        if [ "$DNS" ] || [ "$DNS6" ] ; then
            cat <<EOF >"$statedir/$ifindex"
# This is private data. Do not parse.
LLMNR=yes
MDNS=no
SERVERS=$(echo $DNS6 $DNS)
DOMAINS=$(echo $DOMAINS6 $DOMAINS)
EOF
            if [ -n "$DEFAULT_ROUTE" ]; then
                cat <<EOF >>"$statedir/$ifindex"
DEFAULT_ROUTE=$DEFAULT_ROUTE
EOF
            fi
            chown systemd-resolve:systemd-resolve "$statedir/$ifindex"
            # In addition to creating the state file (needed if we run before
            # resolved is started), also feed the information directly to
            # resolved.
            if systemctl --quiet is-active systemd-resolved; then
                resolvectl llmnr "$ifindex" yes || resolvectl_failed=$?
                resolvectl mdns "$ifindex" no || resolvectl_failed=$?
                if [ "$DOMAINS6" ] || [ "$DOMAINS" ]; then
                    resolvectl domain "$ifindex" $DOMAINS6 $DOMAINS || resolvectl_failed=$?
                else
                    resolvectl domain "$ifindex" "" || resolvectl_failed=$?
                fi
                resolvectl dns "$ifindex" $DNS6 $DNS || resolvectl_failed=$?
                if [ "$DEFAULT_ROUTE" ]; then
                    resolvectl default-route "$ifindex" $DEFAULT_ROUTE || resolvectl_failed=$?
                fi
            fi
        else
            rm -f "$statedir/$ifindex"
            if systemctl --quiet is-active systemd-resolved; then
                resolvectl revert "$ifindex" || resolvectl_failed=$?
            fi
        fi

        # resolved was running, but without dbus, it means state files
        # will not be read & resolvectl commands failed, restart it
        if [ "$resolvectl_failed" ]; then
                systemctl try-restart systemd-resolved
        fi
    fi
    rm -f "$oldstate" "$newstate"
fi

./new-debian13/etc/dhcp/dhclient-exit-hooks.d/rfc3442-classless-routes

# set classless routes based on the format specified in RFC3442
# e.g.:
#   new_rfc3442_classless_static_routes='24 192 168 10 192 168 1 1 8 10 10 17 66 41'
# specifies the routes:
#   192.168.10.0/24 via 192.168.1.1
#   10.0.0.0/8 via 10.10.17.66.41

RUN="yes"


if [ "$RUN" = "yes" ]; then
	if [ -n "$new_rfc3442_classless_static_routes" ]; then
		if [ "$reason" = "BOUND" ] || [ "$reason" = "REBOOT" ]; then

			set -- $new_rfc3442_classless_static_routes

			while [ $# -gt 0 ]; do
				net_length=$1
				via_arg=''

				case $net_length in
					32|31|30|29|28|27|26|25)
						if [ $# -lt 9 ]; then
							return 1
						fi
						net_address="${2}.${3}.${4}.${5}"
						gateway="${6}.${7}.${8}.${9}"
						shift 9
						;;
					24|23|22|21|20|19|18|17)
						if [ $# -lt 8 ]; then
							return 1
						fi
						net_address="${2}.${3}.${4}.0"
						gateway="${5}.${6}.${7}.${8}"
						shift 8
						;;
					16|15|14|13|12|11|10|9)
						if [ $# -lt 7 ]; then
							return 1
						fi
						net_address="${2}.${3}.0.0"
						gateway="${4}.${5}.${6}.${7}"
						shift 7
						;;
					8|7|6|5|4|3|2|1)
						if [ $# -lt 6 ]; then
							return 1
						fi
						net_address="${2}.0.0.0"
						gateway="${3}.${4}.${5}.${6}"
						shift 6
						;;
					0)	# default route
						if [ $# -lt 5 ]; then
							return 1
						fi
						net_address="0.0.0.0"
						gateway="${2}.${3}.${4}.${5}"
						shift 5
						;;
					*)	# error
						return 1
						;;
				esac

				# take care of link-local routes
				if [ "${gateway}" != '0.0.0.0' ]; then
					via_arg="via ${gateway}"
				fi

				# set route (ip detects host routes automatically)
				ip -4 route add "${net_address}/${net_length}" \
					${via_arg} dev "${interface}" >/dev/null 2>&1
			done
		fi
	fi
fi

./new-debian13/etc/dhcp/dhclient-exit-hooks.d/timesyncd

TIMESYNCD_CONF=/run/systemd/timesyncd.conf.d/01-dhclient.conf

timesyncd_servers_setup_remove() {
        if [ ! -d /run/systemd/system ]; then
                return
        fi
        if [ ! -x /usr/lib/systemd/systemd-timesyncd ]; then
                return
        fi

        if [ -e $TIMESYNCD_CONF ]; then
                rm -f $TIMESYNCD_CONF
                systemctl try-restart systemd-timesyncd.service || true
        fi
}

timesyncd_servers_setup_add() {
        if [ ! -d /run/systemd/system ]; then
                return
        fi
        if [ ! -x /usr/lib/systemd/systemd-timesyncd ]; then
                return
        fi

        if [ -e $TIMESYNCD_CONF ] && [ "$new_ntp_servers" = "$old_ntp_servers" ]; then
                return
        fi

        if [ -z "$new_ntp_servers" ]; then
                timesyncd_servers_setup_remove
                return
        fi

        mkdir -p $(dirname $TIMESYNCD_CONF)
        cat <<EOF > ${TIMESYNCD_CONF}.new
# NTP server entries received from DHCP server
[Time]
NTP=$new_ntp_servers
EOF
        mv ${TIMESYNCD_CONF}.new ${TIMESYNCD_CONF}
        systemctl try-restart systemd-timesyncd.service || true
}


case $reason in
        BOUND|RENEW|REBIND|REBOOT)
                timesyncd_servers_setup_add
                ;;
        EXPIRE|FAIL|RELEASE|STOP)
                timesyncd_servers_setup_remove
                ;;
esac

./new-debian13/etc/dhcp/dhclient.conf

# Configuration file for /sbin/dhclient.
#
# This is a sample configuration file for dhclient. See dhclient.conf's
#	man page for more information about the syntax of this file
#	and a more comprehensive list of the parameters understood by
#	dhclient.
#
# Normally, if the DHCP server provides reasonable information and does
#	not leave anything out (like the domain name, for example), then
#	few changes must be made to this file, if any.
#

option rfc3442-classless-static-routes code 121 = array of unsigned integer 8;

send host-name = gethostname();
request subnet-mask, broadcast-address, time-offset, routers,
	domain-name, domain-name-servers, domain-search, host-name,
	dhcp6.name-servers, dhcp6.domain-search, dhcp6.fqdn, dhcp6.sntp-servers,
	netbios-name-servers, netbios-scope, interface-mtu,
	rfc3442-classless-static-routes, ntp-servers;

#send dhcp-client-identifier 1:0:a0:24:ab:fb:9c;
#send dhcp-lease-time 3600;
#supersede domain-name "fugue.com home.vix.com";
#prepend domain-name-servers 127.0.0.1;
#require subnet-mask, domain-name-servers;
#timeout 60;
#retry 60;
#reboot 10;
#select-timeout 5;
#initial-interval 2;
#script "/sbin/dhclient-script";
#media "-link0 -link1 -link2", "link0 link1";
#reject 192.33.137.209;

#alias {
#  interface "eth0";
#  fixed-address 192.5.5.213;
#  option subnet-mask 255.255.255.255;
#}

#lease {
#  interface "eth0";
#  fixed-address 192.33.137.200;
#  medium "link0 link1";
#  option host-name "andare.swiftmedia.com";
#  option subnet-mask 255.255.255.0;
#  option broadcast-address 192.33.137.255;
#  option routers 192.33.137.250;
#  option domain-name-servers 127.0.0.1;
#  renew 2 2000/1/12 00:00:01;
#  rebind 2 2000/1/12 00:00:01;
#  expire 2 2000/1/12 00:00:01;
#}

./new-debian13/etc/fstab

PARTUUID=ee829b50-dbb1-4461-a46b-5fc08bfe425d / ext4 rw,discard,errors=remount-ro,x-systemd.growfs 0 1
PARTUUID=ccd36580-fca6-4e71-886d-2c5bc9d728b7 /boot/efi vfat defaults 0 0

./new-debian13/etc/hostname

NextCloudBackup

./new-debian13/etc/hosts

# Your system has configured 'manage_etc_hosts' as True.
# As a result, if you wish for changes to this file to persist
# then you will need to either
# a.) make changes to the master file in /etc/cloud/templates/hosts.debian.tmpl
# b.) change or remove the value of 'manage_etc_hosts' in
#     /etc/cloud/cloud.cfg or cloud-config from user-data
#
127.0.1.1 vmi2936396.contaboserver.net vmi2936396
127.0.0.1 localhost

# The following lines are desirable for IPv6 capable hosts
::1 localhost ip6-localhost ip6-loopback
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters

./new-debian13/etc/initramfs-tools/initramfs.conf

#
# initramfs.conf
# Configuration file for mkinitramfs(8). See initramfs.conf(5).
#
# Note that configuration options from this file can be overridden
# by config files in the /etc/initramfs-tools/conf.d directory.

#
# MODULES: [ most | netboot | dep | list ]
#
# most - Add most filesystem and all harddrive drivers.
#
# dep - Try and guess which modules to load.
#
# netboot - Add the base modules, network modules, but skip block devices.
#
# list - Only include modules from the 'additional modules' list
#

MODULES=most

#
# BUSYBOX: [ y | n | auto ]
#
# Use busybox shell and utilities.  If set to n, klibc utilities will be used.
# If set to auto (or unset), busybox will be used if installed and klibc will
# be used otherwise.
#

BUSYBOX=auto

#
# KEYMAP: [ y | n ]
#
# Load a keymap during the initramfs stage.
#

KEYMAP=n

#
# COMPRESS: [ gzip | bzip2 | lz4 | lzma | lzop | xz | zstd ]
#

COMPRESS=zstd

#
# COMPRESSLEVEL: ...
#
# Set a compression level for the compressor.
# Defaults vary by compressor.
#
# Valid values are:
# 1 -  9 for gzip|bzip2|lzma|lzop
# 0 -  9 for  lz4|xz
# 0 - 19 for zstd
#
# COMPRESSLEVEL=3

#
# DEVICE: ...
#
# Specify a specific network interface, like eth0
# Overridden by optional ip= or BOOTIF= bootarg
#

DEVICE=

#
# NFSROOT: [ auto | HOST:MOUNT ]
#

NFSROOT=auto

#
# RUNSIZE: ...
#
# The size of the /run tmpfs mount point, like 256M or 10%
# Overridden by optional initramfs.runsize= bootarg
#

RUNSIZE=10%

#
# FSTYPE: ...
#
# The filesystem type(s) to support, or "auto" to use the current root
# filesystem type
#

FSTYPE=auto

./new-debian13/etc/initramfs-tools/modules

# List of modules that you want to include in your initramfs.
# They will be loaded at boot time in the order below.
#
# Syntax:  module_name [args ...]
#
# You must run update-initramfs(8) to effect this change.
#
# Examples:
#
# raid1
# sd_mod
zfs

./new-debian13/etc/initramfs-tools/update-initramfs.conf

#
# Configuration file for update-initramfs(8)
#

#
# update_initramfs [ yes | all | no ]
#
# Default is yes
# If set to all update-initramfs will update all initramfs
# If set to no disables any update to initramfs beside kernel upgrade

update_initramfs=yes

#
# backup_initramfs [ yes | no ]
#
# Default is no
# If set to no leaves no .bak backup files.

backup_initramfs=no

./new-debian13/etc/modprobe.d/blacklist.conf

blacklist pcspkr
blacklist floppy

./new-debian13/etc/modprobe.d/dkms.conf

# modprobe information used for DKMS modules
#
# This is a stub file, should be edited when needed,
# used by default by DKMS.

./new-debian13/etc/modules

# /etc/modules is obsolete and has been replaced by /etc/modules-load.d/.
# Please see modules-load.d(5) and modprobe.d(5) for details.
#
# Updating this file still works, but it is undocumented and unsupported.

./new-debian13/etc/modules-load.d/zfs.conf

zfs

./new-debian13/etc/netplan/50-cloud-init.yaml

network:
  version: 2
  ethernets:
    eth0:
      match:
        macaddress: "00:50:56:5e:95:7b"
      dhcp4: true
      dhcp6: true
      set-name: "eth0"

./new-debian13/etc/network/if-pre-up.d/ethtool

#!/bin/sh

ETHTOOL=/usr/sbin/ethtool

test -x $ETHTOOL || exit 0

[ "$IFACE" != "lo" ] || exit 0

# Gather together the mixed bag of settings applied with -s/--change
SETTINGS="\
${IF_ETHERNET_PORT:+ port $IF_ETHERNET_PORT}\
${IF_DRIVER_MESSAGE_LEVEL:+ msglvl $IF_DRIVER_MESSAGE_LEVEL}\
"
[ -z "$SETTINGS" ] || $ETHTOOL --change "$IFACE" $SETTINGS

./new-debian13/etc/network/if-up.d/ethtool

#!/bin/sh

ETHTOOL=/usr/sbin/ethtool

test -x $ETHTOOL || exit 0

[ "$IFACE" != "lo" ] || exit 0

# Find settings with a given prefix and print them as they appeared in
# /etc/network/interfaces, only with the prefix removed.
# This actually prints each name and value on a separate line, but that
# doesn't matter to the shell.
gather_settings () {
    set | sed -n "
/^IF_$1[A-Za-z0-9_]*=/ {
    h;                             # hold line
    s/^IF_$1//; s/=.*//; s/_/-/g;  # get name without prefix
    y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/;  # lower-case
    p;
    g;                             # restore line
    s/^[^=]*=//; s/^'\(.*\)'/\1/;  # get value
    p;
}"
}

# Gather together the mixed bag of settings applied with -s/--change
SETTINGS="\
${IF_LINK_SPEED:+ speed $IF_LINK_SPEED}\
${IF_LINK_DUPLEX:+ duplex $IF_LINK_DUPLEX}\
"

# WOL has an optional pass-key
set -- $IF_ETHERNET_WOL
SETTINGS="$SETTINGS${1:+ wol $1}${2:+ sopass $2}"

# Autonegotiation can be on|off or an advertising mask
case "$IF_ETHERNET_AUTONEG" in
'')	;;
on|off)	SETTINGS="$SETTINGS autoneg $IF_ETHERNET_AUTONEG" ;;
*)	SETTINGS="$SETTINGS autoneg on advertise $IF_ETHERNET_AUTONEG" ;;
esac

[ -z "$SETTINGS" ] || $ETHTOOL --change "$IFACE" $SETTINGS

SETTINGS="$(gather_settings ETHERNET_PAUSE_)"
[ -z "$SETTINGS" ] || $ETHTOOL --pause "$IFACE" $SETTINGS

SETTINGS="$(gather_settings HARDWARE_IRQ_COALESCE_)"
[ -z "$SETTINGS" ] || $ETHTOOL --coalesce "$IFACE" $SETTINGS

SETTINGS="$(gather_settings HARDWARE_DMA_RING_)"
[ -z "$SETTINGS" ] || $ETHTOOL --set-ring "$IFACE" $SETTINGS

SETTINGS="$(gather_settings OFFLOAD_)"
[ -z "$SETTINGS" ] || $ETHTOOL --offload "$IFACE" $SETTINGS

./new-debian13/etc/resolv.conf

# Managed by update.sh
nameserver 209.126.15.53
nameserver 195.179.224.53
nameserver 2a02:c202:5028::53
nameserver 2605:a140:5028::53

./new-debian13/etc/systemd/system/sshd-keygen@.service.d/disable-sshd-keygen-if-cloud-init-active.conf

# In some cloud-init enabled images the sshd-keygen template service may race
# with cloud-init during boot causing issues with host key generation.  This
# drop-in config adds a condition to sshd-keygen@.service if it exists and
# prevents the sshd-keygen units from running *if* cloud-init is going to run.
#
[Unit]
ConditionPathExists=!/run/systemd/generator.early/multi-user.target.wants/cloud-init.target

./new-debian13/etc/systemd/system/syncthing.service

[Unit]
Description=Syncthing for www-data
After=network.target

[Service]
User=www-data
Group=www-data
ExecStart=/usr/bin/syncthing serve --no-browser --home=/var/lib/syncthing
Restart=on-failure
ProtectSystem=full
ProtectHome=true

[Install]
WantedBy=multi-user.target

./new-debian13/system-info.txt

Source root: /sda1

OS release:
PRETTY_NAME="Debian GNU/Linux 13 (trixie)"
NAME="Debian GNU/Linux"
VERSION_ID="13"
VERSION="13 (trixie)"
VERSION_CODENAME=trixie
DEBIAN_VERSION_FULL=13.7
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

Network packages:
Package: cloud-initramfs-growroot
Status: install ok installed
Version: 0.18.debian14

Package: isc-dhcp-client
Status: install ok installed
Version: 4.4.3-P1-8

Package: netplan.io
Status: install ok installed
Version: 1.1.2-7


Network-related service links:
/sda1/etc/systemd/system/sysinit.target.wants/systemd-network-generator.service -> /lib/systemd/system/systemd-network-generator.service
/sda1/etc/systemd/system/sysinit.target.wants/systemd-resolved.service -> /lib/systemd/system/systemd-resolved.service
/sda1/etc/systemd/system/network-online.target.wants/systemd-networkd-wait-online.service -> /lib/systemd/system/systemd-networkd-wait-online.service
/sda1/etc/systemd/system/multi-user.target.wants/systemd-networkd.service -> /lib/systemd/system/systemd-networkd.service
/sda1/etc/systemd/system/cloud-init.target.wants/cloud-init-local.service -> /lib/systemd/system/cloud-init-local.service
/sda1/etc/systemd/system/cloud-init.target.wants/cloud-init-main.service -> /usr/lib/systemd/system/cloud-init-main.service
/sda1/etc/systemd/system/cloud-init.target.wants/cloud-init-network.service -> /usr/lib/systemd/system/cloud-init-network.service
/sda1/etc/systemd/system/cloud-init.target.wants/cloud-final.service -> /lib/systemd/system/cloud-final.service
/sda1/etc/systemd/system/cloud-init.target.wants/cloud-init.service -> /lib/systemd/system/cloud-init.service
/sda1/etc/systemd/system/cloud-init.target.wants/cloud-config.service -> /lib/systemd/system/cloud-config.service
/sda1/etc/systemd/system/cloud-init.target.wants/cloud-init-hotplugd.socket -> /lib/systemd/system/cloud-init-hotplugd.socket
/sda1/etc/systemd/system/dbus-org.freedesktop.network1.service -> /lib/systemd/system/systemd-networkd.service
/sda1/etc/systemd/system/sockets.target.wants/systemd-networkd.socket -> /lib/systemd/system/systemd-networkd.socket

./new-debian13/var/lib/dpkg/status

Package: adduser
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 428
Maintainer: Debian Adduser Developers <adduser@packages.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 3.152
Depends: passwd (>= 1:4.17.2-5)
Suggests: liblocale-gettext-perl, perl, cron, quota
Conffiles:
 /etc/adduser.conf ef23042097ebb0d1075254f888c3c394
 /etc/deluser.conf 11a06baf8245fd8d690b99024d228c1f
Description: add and remove users and groups
 This package includes the 'adduser' and 'deluser' commands for creating
 and removing users.
 .
  - 'adduser' creates new users and groups and adds existing users to
    existing groups;
  - 'deluser' removes users and groups and removes users from a given
    group.
 .
 Adding users with 'adduser' is much easier than adding them manually.
 'Adduser' will choose UID and GID values that conform to Debian policy,
 create a home directory, copy skeletal user configuration, and
 automate setting initial values for the user's password, real name
 and so on.
 .
 'Deluser' can back up and remove users' home directories
 and mail spool or all the files they own on the system.
 .
 A custom script can be executed after each of the commands.
 .
 'Adduser' and 'Deluser' are intended to be used by the local
 administrator in lieu of the tools from the 'useradd' suite, and
 they provide support for easy use from Debian package maintainer
 scripts, functioning as kind of a policy layer to make those scripts
 easier and more stable to write and maintain.

Package: alsa-topology-conf
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 420
Maintainer: Debian ALSA Maintainers <pkg-alsa-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.2.5.1-3
Replaces: libasound2-data (<< 1.2.1)
Breaks: libasound2-data (<< 1.2.1)
Enhances: libasound2-data
Description: ALSA topology configuration files
 This package contains ALSA topology configuration files that can be used
 by libasound2 for specific audio hardware.
 .
 ALSA is the Advanced Linux Sound Architecture.
Homepage: https://www.alsa-project.org/

Package: alsa-ucm-conf
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1353
Maintainer: Debian ALSA Maintainers <pkg-alsa-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.2.14-1
Depends: libasound2t64
Description: ALSA Use Case Manager configuration files
 This package contains ALSA Use Case Manager configuration of audio
 input/output names and routing for specific audio hardware. They can be
 used with the alsaucm tool.
 .
 Installing these configuration files is absolutely necessary to make some
 sound hardware work. Its installation is highly recommended in order to
 use ALSA-backed hardware.
 .
 ALSA is the Advanced Linux Sound Architecture.
Homepage: https://www.alsa-project.org/

Package: apache2
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 582
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: amd64
Version: 2.4.69-1~deb13u1
Provides: httpd, httpd-cgi
Depends: apache2-bin (= 2.4.69-1~deb13u1), apache2-data (= 2.4.69-1~deb13u1), apache2-utils (= 2.4.69-1~deb13u1), media-types, procps, perl:any
Pre-Depends: init-system-helpers (>= 1.54~)
Recommends: ssl-cert
Suggests: apache2-doc, apache2-suexec-pristine | apache2-suexec-custom, ufw, www-browser
Conffiles:
 /etc/apache2/apache2.conf 354c9e6d2b88a0a3e0548f853840674c
 /etc/apache2/conf-available/charset.conf e6fbb8adf631932851d6cc522c1e48d7
 /etc/apache2/conf-available/localized-error-pages.conf f542d267bfce7815f9453eb1476e5f73
 /etc/apache2/conf-available/other-vhosts-access-log.conf 2cad303fc4221d6b0068a8b37597b9fb
 /etc/apache2/conf-available/security.conf 332668933023a463046fa90d9b057193
 /etc/apache2/conf-available/serve-cgi-bin.conf c146ad61e8853896938a5d30d7aa6c89
 /etc/apache2/envvars e4431a53c868ae0dfcde68564f3ce6a7
 /etc/apache2/magic a6d370833a02f53db6a0a30800704994
 /etc/apache2/mods-available/access_compat.load f7f77b3eb4005749b583ff14b49f8bf1
 /etc/apache2/mods-available/actions.conf aa7020bed65647b011cfb36e8567aa99
 /etc/apache2/mods-available/actions.load 95dcfd2efdd41666de5f31dd72e01e41
 /etc/apache2/mods-available/alias.conf a1632bd99783ef6ca8a47a6005d04d56
 /etc/apache2/mods-available/alias.load 7742296502ce1d2f970cc87322d8ffba
 /etc/apache2/mods-available/allowmethods.load b377b96eb4dddd88f9428d9cc2fd87ea
 /etc/apache2/mods-available/asis.load d1003c9fa12b4d3ed35ea3827a689492
 /etc/apache2/mods-available/auth_basic.load a92c34a3ce5e67e2ecbd272155ebe072
 /etc/apache2/mods-available/auth_digest.load f29d047cd59013e2fa6724d677c7970b
 /etc/apache2/mods-available/auth_form.load 731420a769dd8ad537d68bfdbdd6a506
 /etc/apache2/mods-available/authn_anon.load 03cbe85c698911a3d3235b4855726481
 /etc/apache2/mods-available/authn_core.load c6420ed74b0095f8408aba3e11db4907
 /etc/apache2/mods-available/authn_dbd.load 86e21a672a4f245715a788f9873174ed
 /etc/apache2/mods-available/authn_dbm.load 4e37546871dbcba8550a0d781f6fbfa8
 /etc/apache2/mods-available/authn_file.load ecdeeab8cfec4a9dd0c065a4d6948c31
 /etc/apache2/mods-available/authn_socache.load 260e21e1eb5caa7bcabe8a2fae11445f
 /etc/apache2/mods-available/authnz_fcgi.load b12a39427b0b3a8d2ffb03cfc029da18
 /etc/apache2/mods-available/authnz_ldap.load d65845f053d08b82da239c73c9094c35
 /etc/apache2/mods-available/authz_core.load 90ad8f57655bcd98b7b07864736ab954
 /etc/apache2/mods-available/authz_dbd.load c746b8c3bf3fca950ca41fcd553328b4
 /etc/apache2/mods-available/authz_dbm.load 8cd42e62d8ca0701f9aad080ec968493
 /etc/apache2/mods-available/authz_groupfile.load 97a3e14926ce7bf5f2d2a7b93ece648d
 /etc/apache2/mods-available/authz_host.load f529587409471e3feb62256bccaf538a
 /etc/apache2/mods-available/authz_owner.load 9ed1ea15654bb594453438154b642539
 /etc/apache2/mods-available/authz_user.load bcf988f105564ec1e14b78df56a01cd8
 /etc/apache2/mods-available/autoindex.conf 958f2742a80ae30f95507fb84e9eb018
 /etc/apache2/mods-available/autoindex.load b9f9d364f1b4c96c45b6db353180aa15
 /etc/apache2/mods-available/brotli.load da4d337dd726ab27221b06d92c998e36
 /etc/apache2/mods-available/buffer.load ae1e21b4fd2c2e8236ec641cae9814bd
 /etc/apache2/mods-available/cache.load ea99aba14e9aa25c27653b9958239a6e
 /etc/apache2/mods-available/cache_disk.conf 0b2be6d48bbad8b4e32eef623e3670bc
 /etc/apache2/mods-available/cache_disk.load 56ebd9819aa70a7ff8ac04e4922049f2
 /etc/apache2/mods-available/cache_socache.load 4b548216cee2e910e9059e426f81e60c
 /etc/apache2/mods-available/cern_meta.load 2c2d9adcb273f934304e7dfb5775f7b9
 /etc/apache2/mods-available/cgi.load 32a1c48f0e29feb415c9460378728d82
 /etc/apache2/mods-available/cgid.conf d7410fcd5d57c404144ed32e2d5c551f
 /etc/apache2/mods-available/cgid.load c3ee2eac02c248b5a39fb1a7afee4cb9
 /etc/apache2/mods-available/charset_lite.load 1585fcd1b631c2e9b166e170cb162c54
 /etc/apache2/mods-available/data.load b6cc5b9e815f551335596cd1e25ffc34
 /etc/apache2/mods-available/dav.load 2ee48948add72e6b8682d041acbcab7f
 /etc/apache2/mods-available/dav_fs.conf 9d5c750538bf58538c558b907ca924f1
 /etc/apache2/mods-available/dav_fs.load 17f662fd023dbaaab9d89f9a11ae58c1
 /etc/apache2/mods-available/dav_lock.load faad09687e64ebb9670aa0b8095d6642
 /etc/apache2/mods-available/dbd.load f03fe275174a5ed97b0f5f5726ccea60
 /etc/apache2/mods-available/deflate.conf 2f28f35168069262fb1055abab5848fe
 /etc/apache2/mods-available/deflate.load 6a7a23153796456ee919abdf728fd972
 /etc/apache2/mods-available/dialup.load dbc3535a9e5dfd799cf16b5c0d58f137
 /etc/apache2/mods-available/dir.conf 4dbfa06e481b9a2e874247fc8c157c3b
 /etc/apache2/mods-available/dir.load 397aadae1b8b18e3a7a233cf7c297f99
 /etc/apache2/mods-available/dump_io.load 8231c51ef692e0766625ece087484fe4
 /etc/apache2/mods-available/echo.load 226a145f19c43d9f921c35eacfd61cb2
 /etc/apache2/mods-available/env.load 3e8963a7df7c047be50a552d80a4f853
 /etc/apache2/mods-available/expires.load dac64edc06fe538c2edd7b3f1f3b03f1
 /etc/apache2/mods-available/ext_filter.load d3c4acfca1322274a9a8504e8cef27e9
 /etc/apache2/mods-available/file_cache.load f097659127628ec6f9c6a558d0baf566
 /etc/apache2/mods-available/filter.load 8df0170e37a8925238860657d6c60fe5
 /etc/apache2/mods-available/headers.load ba7d09162b65d09397bd58be33138e4d
 /etc/apache2/mods-available/heartbeat.load b78970d35346bfe5eb5817d228cb209c
 /etc/apache2/mods-available/heartmonitor.load b4da13d1c05a7dd1bdeb272300c1fc83
 /etc/apache2/mods-available/http2.conf 5bc6b4b533d920c8b677f3bb37734a0f
 /etc/apache2/mods-available/http2.load e18e0c7e38196e7d7580ecedaaa72e3b
 /etc/apache2/mods-available/ident.load 51ba623a8a2bd71c512f847d02e0934f
 /etc/apache2/mods-available/imagemap.load 51d5109d8bc2bafc17af03beace4d8a4
 /etc/apache2/mods-available/include.load 9cf2fa9ceb6571b5fab4603daad44c83
 /etc/apache2/mods-available/info.conf 1fd47a9adf023a925301c58490417cf9
 /etc/apache2/mods-available/info.load c1faffe40b8bed9f2b817b9dc0503bb6
 /etc/apache2/mods-available/lbmethod_bybusyness.load 094b7c1d424cc4a1dee6f77d301e1888
 /etc/apache2/mods-available/lbmethod_byrequests.load f33d55ab5bbf907340426e31f99f6701
 /etc/apache2/mods-available/lbmethod_bytraffic.load e656d80b48c020b7d77ece23368e04f1
 /etc/apache2/mods-available/lbmethod_heartbeat.load 944703ff299a25cf068de7f6a2374465
 /etc/apache2/mods-available/ldap.conf f1c3882b24335ef261a90696e060813e
 /etc/apache2/mods-available/ldap.load 735ac5f246738e11a53f6c515b8dfc48
 /etc/apache2/mods-available/log_debug.load d062328e5987fa686615394768339abe
 /etc/apache2/mods-available/log_forensic.load 7177e2427eb7c78f1ab10c034a809793
 /etc/apache2/mods-available/lua.load 5e445ce688a49e0a1fcfcaa414fe21f9
 /etc/apache2/mods-available/macro.load 40e0509b4b2d307cdfe4de75fa89dc91
 /etc/apache2/mods-available/md.load 4fa08b541b4bac4a4849e6fd6d69c973
 /etc/apache2/mods-available/mime.conf 5e9b0033f29b5bf2d9e736f7719ef1f9
 /etc/apache2/mods-available/mime.load 9c858dc2ad2825dc3f862ecba90cf6ec
 /etc/apache2/mods-available/mime_magic.conf b0b89da0f5d38b6c7177113018fc475d
 /etc/apache2/mods-available/mime_magic.load ab5c69aa0c91f11157e9bfc4972f8cce
 /etc/apache2/mods-available/mpm_event.conf 157cee0c8592d9e8bbffcd33abac3e2a
 /etc/apache2/mods-available/mpm_event.load 08816d280ebbd94b8c5961fc6f7168b5
 /etc/apache2/mods-available/mpm_prefork.conf 2c7263c7cd86af07dcedf627d0ad2ade
 /etc/apache2/mods-available/mpm_prefork.load 9bcdffe5055526e0929ecd49ee311c9e
 /etc/apache2/mods-available/mpm_worker.conf b57019603bf38326fcb7f9c0785a3c34
 /etc/apache2/mods-available/mpm_worker.load 0c6640977f0f046a55fdaf76eb54adef
 /etc/apache2/mods-available/negotiation.conf b023fc6578d5b64059df4dfe689cb779
 /etc/apache2/mods-available/negotiation.load fd7bf44d833446a35f0199d7cbcc9793
 /etc/apache2/mods-available/proxy.conf a3c7629e7a55080e9c2f4ff1c70a98b2
 /etc/apache2/mods-available/proxy.load 3d3719c88d01152e817f74fc2fd6ce9e
 /etc/apache2/mods-available/proxy_ajp.load e058e03c1d4f9e4d8e2c439ed75cc501
 /etc/apache2/mods-available/proxy_balancer.conf 8a37d3a532dbb4866d4dd58162812f85
 /etc/apache2/mods-available/proxy_balancer.load 9c6e6ff2195159c8af97f7673e8d2ada
 /etc/apache2/mods-available/proxy_connect.conf 2fb7604796a1712d3fa4310c0a4a6c56
 /etc/apache2/mods-available/proxy_connect.load 6bc4b5de977f70a0b6ae98ab04383c0c
 /etc/apache2/mods-available/proxy_express.load f2ad6e7e80d2750cdca5986657e7835e
 /etc/apache2/mods-available/proxy_fcgi.load 09cbda44eecbf1cbab48b30045217e3c
 /etc/apache2/mods-available/proxy_fdpass.load 9e5584db5f748a2fb71b582a255a976e
 /etc/apache2/mods-available/proxy_ftp.conf 12809c2f356d9c05dbdc887375a6bf1b
 /etc/apache2/mods-available/proxy_ftp.load c05db1b229a7957f0032c0d79ed7e3c9
 /etc/apache2/mods-available/proxy_hcheck.load 92898c1ef9124193fa5d9e13408e0372
 /etc/apache2/mods-available/proxy_html.conf 6012bbc4155b99642dba050df6c9028f
 /etc/apache2/mods-available/proxy_html.load dac7646a0a7242de76f788b4da14390b
 /etc/apache2/mods-available/proxy_http.load 161b514c355c6daa95f11371fb9c184c
 /etc/apache2/mods-available/proxy_http2.load 8a2cdbe25537eb8cb9007e351274f852
 /etc/apache2/mods-available/proxy_scgi.load cb11d685e60db26bbdad456263bf63b7
 /etc/apache2/mods-available/proxy_uwsgi.load 37493bab0af283fd186d2797a9f5f95b
 /etc/apache2/mods-available/proxy_wstunnel.load d2e5c21b886333f1662fe74591260d5d
 /etc/apache2/mods-available/ratelimit.load fb40aa030d5458dd99a0c9d1141bcde4
 /etc/apache2/mods-available/reflector.load 306c71fae73733506db9099d106ba642
 /etc/apache2/mods-available/remoteip.load 81a6511c79ab338aef51a6c185152231
 /etc/apache2/mods-available/reqtimeout.conf 30ef0f5bd709e44eeee85e9f847000c0
 /etc/apache2/mods-available/reqtimeout.load 7fd814775dc3f3c9e6753ef874978f96
 /etc/apache2/mods-available/request.load 36c1b324cd545e3e29b50b5e2a8357e8
 /etc/apache2/mods-available/rewrite.load 55e18fb7df64c8f390904b972637c17d
 /etc/apache2/mods-available/sed.load 8ba3c7ff4243e6a45b6e3c372fc0de1b
 /etc/apache2/mods-available/session.load b552f1e184865c597ae397876fb3a0a6
 /etc/apache2/mods-available/session_cookie.load 89aff7a7f8b4347965d4cf6ea3c5beb9
 /etc/apache2/mods-available/session_crypto.load 066002be7d8c6c381553dbded41db1b6
 /etc/apache2/mods-available/session_dbd.load cf86e56f8ee26f5dccc39c2f690d7f79
 /etc/apache2/mods-available/setenvif.conf 5b6b9d2a0448f4c5aec4a5a3454bc77b
 /etc/apache2/mods-available/setenvif.load 6f670fad5b6f6b14fa72c9cd3058469b
 /etc/apache2/mods-available/slotmem_plain.load fd33fcd86c77d4d5044ad904e7f38360
 /etc/apache2/mods-available/slotmem_shm.load 127df94eaf6987ad67b964f01eec3251
 /etc/apache2/mods-available/socache_dbm.load 9f11810517a6bf2eba31b336ebbfad70
 /etc/apache2/mods-available/socache_memcache.load c0101bc50501b12e7c8c74014560404b
 /etc/apache2/mods-available/socache_redis.load 5c6ee35e3b89ea7ffdb19a2b344ada94
 /etc/apache2/mods-available/socache_shmcb.load 9efb84889b8e1683ce104033bf30973d
 /etc/apache2/mods-available/speling.load 095570b0cb18ebdfc357a2241c6932ea
 /etc/apache2/mods-available/ssl.conf 050cb6f2d13ef650c353cce86ad3b839
 /etc/apache2/mods-available/ssl.load 8cc37c9d0db67f76c2871ed1d38c07b3
 /etc/apache2/mods-available/status.conf a2068bd13eadd9b0b9168d94e21c37b6
 /etc/apache2/mods-available/status.load 00976ea5115f286bbc21357581d0b65e
 /etc/apache2/mods-available/substitute.load 50e63dc17612e22484a88f537e8aec8e
 /etc/apache2/mods-available/suexec.load 335169c85f4afc14524846789d46af06
 /etc/apache2/mods-available/unique_id.load 6c13959015fb35276572070b44e63380
 /etc/apache2/mods-available/userdir.conf 202509138f19284efb527eff4cfb042a
 /etc/apache2/mods-available/userdir.load c034025405561ea48fbcb67fd1998f4d
 /etc/apache2/mods-available/usertrack.load 8400042dd4374fad5eedf33ffb3c68f0
 /etc/apache2/mods-available/vhost_alias.load fdd42d34966c329cdee2435dfe72ee24
 /etc/apache2/mods-available/xml2enc.load 1f7ab653ed3601bd265871cdf252a224
 /etc/apache2/ports.conf e0eadfd8b9250d90d5c3004171eb78f6
 /etc/apache2/sites-available/000-default.conf 45ed6a20d7ff26b62d873585bc1b42ca
 /etc/apache2/sites-available/default-ssl.conf 58d23841f0ea37f6c3c1f1c7bda9c6d7
 /etc/cron.daily/apache2 c788ffaa4c682c91e6a1cd7f53840d62
 /etc/default/apache-htcacheclean ae8721a0bc5b4e2ef7a5258b1e9db5c5
 /etc/init.d/apache-htcacheclean 29fe315052a1c5fbe9dc9f29485ed906
 /etc/init.d/apache2 379d9173b08f87449abc0fbd44926194
 /etc/logrotate.d/apache2 a38d9e980faebcda9a1998fd0f90b69e
 /etc/ufw/applications.d/apache2-utils.ufw.profile f8d4fd920e598ceb4379613c6261f6af
Description: Apache HTTP Server
 The Apache HTTP Server Project's goal is to build a secure, efficient and
 extensible HTTP server as standards-compliant open source software. The
 result has long been the number one web server on the Internet.
 .
 Installing this package results in a full installation, including the
 configuration files, init scripts and support scripts.
Homepage: https://httpd.apache.org/

Package: apache2-bin
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 5182
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: amd64
Source: apache2
Version: 2.4.69-1~deb13u1
Provides: apache2-api-20120211, apache2-api-20120211-openssl1.1
Depends: perl:any, libapr1t64 (>= 1.7.0), libaprutil1-dbd-sqlite3 | libaprutil1-dbd-mysql | libaprutil1-dbd-odbc | libaprutil1-dbd-pgsql | libaprutil1-dbd-freetds, libaprutil1-ldap, libaprutil1t64 (>= 1.6.0), libbrotli1 (>= 0.6.0), libc6 (>= 2.38), libcrypt1 (>= 1:4.1.0), libcurl4t64 (>= 7.28.0), libjansson4 (>= 2.14), libldap2 (>= 2.6.2), liblua5.4-0 (>= 5.4.6), libnghttp2-14 (>= 1.50.0), libpcre2-8-0 (>= 10.22), libssl3t64 (>= 3.0.0), libxml2 (>= 2.7.4), zlib1g (>= 1:1.1.4)
Suggests: apache2-doc, apache2-suexec-pristine | apache2-suexec-custom, www-browser
Breaks: fossil (<< 1:2.24-5~)
Description: Apache HTTP Server (modules and other binary files)
 The Apache HTTP Server Project's goal is to build a secure, efficient and
 extensible HTTP server as standards-compliant open source software. The
 result has long been the number one web server on the Internet.
 .
 This package contains the binaries only and does not set up a working
 web-server instance. Install the "apache2" package to get a fully working
 instance.
Homepage: https://httpd.apache.org/

Package: apache2-data
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 847
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: apache2
Version: 2.4.69-1~deb13u1
Description: Apache HTTP Server (common files)
 The Apache HTTP Server Project's goal is to build a secure, efficient and
 extensible HTTP server as standards-compliant open source software. The
 result has long been the number one web server on the Internet.
 .
 This package contains architecture-independent common files such as icons,
 error pages and static index files.
Homepage: https://httpd.apache.org/

Package: apache2-utils
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 450
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: apache2
Version: 2.4.69-1~deb13u1
Depends: libapr1t64 (>= 1.4.8-2~), libaprutil1t64 (>= 1.5.0), libc6 (>= 2.38), libcrypt1 (>= 1:4.1.0), libssl3t64 (>= 3.0.0)
Description: Apache HTTP Server (utility programs for web servers)
 Provides some add-on programs useful for any web server.  These include:
  - ab (Apache benchmark tool)
  - fcgistarter (Start a FastCGI program)
  - logresolve (Resolve IP addresses to hostnames in logfiles)
  - htpasswd (Manipulate basic authentication files)
  - htdigest (Manipulate digest authentication files)
  - htdbm (Manipulate basic authentication files in DBM format, using APR)
  - htcacheclean (Clean up the disk cache)
  - rotatelogs (Periodically stop writing to a logfile and open a new one)
  - split-logfile (Split a single log including multiple vhosts)
  - checkgid (Checks whether the caller can setgid to the specified group)
  - check_forensic (Extract mod_log_forensic output from Apache log files)
  - httxt2dbm (Generate dbm files for use with RewriteMap)
Homepage: https://httpd.apache.org/

Package: apparmor
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 3068
Maintainer: Debian AppArmor Team <pkg-apparmor-team@lists.alioth.debian.org>
Architecture: amd64
Version: 4.1.0-1
Replaces: fcitx-data (<< 1:4.2.9.1-1ubuntu2)
Depends: debconf, debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.38)
Suggests: apparmor-profiles-extra, apparmor-utils
Breaks: apparmor-profiles-extra (<< 1.21), fcitx-data (<< 1:4.2.9.1-1ubuntu2), snapd (<< 2.44.3+20.04~)
Conffiles:
 /etc/apparmor.d/1password a9fbdb7bc17bb4c908208c2c51e35f33
 /etc/apparmor.d/Discord 67bd979bd52072a84fc19480c5dd8ead
 /etc/apparmor.d/MongoDB_Compass 3f33e671cd57320de31656afa9886136
 /etc/apparmor.d/QtWebEngineProcess 0fe91825545b5a8375ad4f06219eb47b
 /etc/apparmor.d/Xorg 25cd9acc04162704f4a7d1653913bb8f
 /etc/apparmor.d/abi/3.0 f97e410509c5def279aa227c7de12e06
 /etc/apparmor.d/abi/4.0 f17b0a97806d733b5b884d8a1c2fea37
 /etc/apparmor.d/abi/kernel-5.4-outoftree-network 57b68acd4e6418fe5a06dc8c04713e3d
 /etc/apparmor.d/abi/kernel-5.4-vanilla 77047e6f0b014fa8bf27681998382044
 /etc/apparmor.d/abstractions/X 5806074c4a1addf58b361f9586434091
 /etc/apparmor.d/abstractions/apache2-common 904b490fb92cef37b2fa236bfbc1630f
 /etc/apparmor.d/abstractions/apparmor_api/change_profile ebc3b740aa2c79ff9a09f072e67ab569
 /etc/apparmor.d/abstractions/apparmor_api/examine 7a0bb94ed3f1c4746e10159933e83376
 /etc/apparmor.d/abstractions/apparmor_api/find_mountpoint 33f8d5e37df9caec4028d295c8988ba1
 /etc/apparmor.d/abstractions/apparmor_api/introspect 9937e7f2a2ca88cd947570f18df7a942
 /etc/apparmor.d/abstractions/apparmor_api/is_enabled 16256dfcfa3c4bc6f97a956fcc254fb5
 /etc/apparmor.d/abstractions/aspell 0443ce39f2e74dde8bc99d67578ea777
 /etc/apparmor.d/abstractions/audio c0ac7361d58a8c0b1b2ab3d440ca9577
 /etc/apparmor.d/abstractions/authentication d21c8ea53bfc1712f086be6cd367194d
 /etc/apparmor.d/abstractions/base 75ee3729f08b8df570d52727200e70ca
 /etc/apparmor.d/abstractions/bash 9663d039f0152b70cc659e4a25bef566
 /etc/apparmor.d/abstractions/consoles 3414c1cb4c1a951888a84761d1455c6d
 /etc/apparmor.d/abstractions/crypto 0b2705ea2a45989da8cbf6f72f633ecb
 /etc/apparmor.d/abstractions/cups-client aa077a620ae08407f42e743bb9661165
 /etc/apparmor.d/abstractions/dbus 5722cf7a9deb175a1ad0b2bd2311e358
 /etc/apparmor.d/abstractions/dbus-accessibility 99eef485f32c58839618af9a5a4b355b
 /etc/apparmor.d/abstractions/dbus-accessibility-strict 53a9eb9b0c2c0125eefa2990d2db5cf7
 /etc/apparmor.d/abstractions/dbus-network-manager-strict 122f241d720192cb38d6967bc23e356f
 /etc/apparmor.d/abstractions/dbus-session 35d364589e04be56979be11e2f7e31d5
 /etc/apparmor.d/abstractions/dbus-session-strict 1181eeeb79d894eaf2744bf7033a06d8
 /etc/apparmor.d/abstractions/dbus-strict 9d0a9ef3255f550687366cd4126f34d0
 /etc/apparmor.d/abstractions/dconf d72f07955f65089718b126f432177b55
 /etc/apparmor.d/abstractions/devices-usb 46738c324ffb6ed02604cbd6bb8ef4d3
 /etc/apparmor.d/abstractions/devices-usb-read e937f11891d50a4fa0e4947b6977c937
 /etc/apparmor.d/abstractions/dovecot-common c039273aaa213aca51a5213cdd15fed2
 /etc/apparmor.d/abstractions/dri-common 1d2f9b132358d514c1f93560b1988acb
 /etc/apparmor.d/abstractions/dri-enumerate 625ff20775a56ffba1fb3f0afb983617
 /etc/apparmor.d/abstractions/enchant cd0a41e810a99aeeab33aa7d074ff510
 /etc/apparmor.d/abstractions/exo-open c9c0e92a3d96bd795af54343ca2f7247
 /etc/apparmor.d/abstractions/fcitx 7b92a08259791096efa9ec4aaf42c65d
 /etc/apparmor.d/abstractions/fcitx-strict 1e6ee44d280a11a849bb777d1ca9379b
 /etc/apparmor.d/abstractions/fonts 2a254d9d6f5bc6ac1dc73214193083cd
 /etc/apparmor.d/abstractions/freedesktop.org 664072bd486c679d2a0b5aa4643daa6c
 /etc/apparmor.d/abstractions/gio-open e056aa1df18785c584f2f8e734a865b6
 /etc/apparmor.d/abstractions/gnome 8f5adb68ce9ba21cd218f4ccd0e342eb
 /etc/apparmor.d/abstractions/gnupg 2b9899ae239d51a6cd93ccc82c52d234
 /etc/apparmor.d/abstractions/groff 9ac220293c87a17fbd9c8664231b7136
 /etc/apparmor.d/abstractions/gtk c3e77ec5a57f6c5996749b636b257d40
 /etc/apparmor.d/abstractions/gvfs-open 0aa5a1831e2f3321032fcbb78c75e17f
 /etc/apparmor.d/abstractions/hosts_access 9932e0e59cf8a3b86aff275430db7f79
 /etc/apparmor.d/abstractions/ibus cbdc8f7f4aa4192caa920edf6b27c101
 /etc/apparmor.d/abstractions/kde 9d3df34ba20b1d1f2a171e6003a64a50
 /etc/apparmor.d/abstractions/kde-globals-write 66b5c9d5f6b1be675ea41b93e2a40e86
 /etc/apparmor.d/abstractions/kde-icon-cache-write 5812ee3c6e213036512c4dd28a45b0c0
 /etc/apparmor.d/abstractions/kde-language-write f99c8ecacf0f94aafb402e4bda6ff9f0
 /etc/apparmor.d/abstractions/kde-open5 dc4ab3305486c36b4fc34b8d075cb706
 /etc/apparmor.d/abstractions/kerberosclient 70be1b7c525d98654011a7f0bf8b9634
 /etc/apparmor.d/abstractions/ldapclient fa595508690d29fb8ef3bc7f35cd3d34
 /etc/apparmor.d/abstractions/libpam-systemd bab0769af2d7ec03fb89ebcc7dba5133
 /etc/apparmor.d/abstractions/likewise e2eff3c963b34543b78a2e7e92c2832b
 /etc/apparmor.d/abstractions/mdns f60fb04172f264ca93dd91f376c6d198
 /etc/apparmor.d/abstractions/mesa bd29b5ab13805dbc1a0a81fc63970027
 /etc/apparmor.d/abstractions/mir 3ca5ef4b46fdf1e182a96d6560ff26e1
 /etc/apparmor.d/abstractions/mozc a3d1ff87b7822abd5fcaed6844dc296a
 /etc/apparmor.d/abstractions/mysql b12fe1f2bbab642e5851c281986057d0
 /etc/apparmor.d/abstractions/nameservice 0bfb6b6b48e8b71a40b3772204ec1722
 /etc/apparmor.d/abstractions/nameservice-strict a7caf547d8c0ac5fd11723218f2208b8
 /etc/apparmor.d/abstractions/nis 30256a48a705a362b6bc496d2024aa3c
 /etc/apparmor.d/abstractions/nss-systemd 7ed15a941f68ba8326ba03d6d282a4c1
 /etc/apparmor.d/abstractions/nvidia 4927cd22ab0f892bc619cc0f1912923e
 /etc/apparmor.d/abstractions/opencl 2760fba2c4606e11942737d471cd94e7
 /etc/apparmor.d/abstractions/opencl-common 7d6341d69734db1e449b00784d465c70
 /etc/apparmor.d/abstractions/opencl-intel 7434f8469b7ac7dd5e3dc77acdf40b99
 /etc/apparmor.d/abstractions/opencl-mesa e157c360ed8cc0a1f5f883be73f2a416
 /etc/apparmor.d/abstractions/opencl-nvidia 3f7bdad6f0b991ca1de64bf855d01664
 /etc/apparmor.d/abstractions/opencl-pocl 88d670a534ccdb1b48cff6f90163b563
 /etc/apparmor.d/abstractions/openssl fb8cf830a6be79f9c356e0d73f880ce4
 /etc/apparmor.d/abstractions/orbit2 e7ac7aea7951ccb6e9078265f9a2b9ff
 /etc/apparmor.d/abstractions/p11-kit ca4ba017568739d7150f162ec69036e0
 /etc/apparmor.d/abstractions/perl e1913931bfed156d33fe313d49f5bd0d
 /etc/apparmor.d/abstractions/php e1e93bdbc2c95b820f34d81e863edb80
 /etc/apparmor.d/abstractions/php-worker fa7a754d5b039a507084094a3d3a8e68
 /etc/apparmor.d/abstractions/php5 cf013176d89542d9b5931cd1c6ff5096
 /etc/apparmor.d/abstractions/postfix-common 48ff0b5d3ffd8a97e305c85ed7b10475
 /etc/apparmor.d/abstractions/private-files 971749f2d6112faa125c848f739c8752
 /etc/apparmor.d/abstractions/private-files-strict 3dd8bfaf6f4405b56e526de085087369
 /etc/apparmor.d/abstractions/python d4115aba2e29fc49196619af73de8edc
 /etc/apparmor.d/abstractions/qt5 225b633954b4552cd1e1a7b6c0034956
 /etc/apparmor.d/abstractions/qt5-compose-cache-write 3cbd481cf1e9aadae90118b4614c9f7b
 /etc/apparmor.d/abstractions/qt5-settings-write 2341b9405a1923ce1f7c614ac68138c0
 /etc/apparmor.d/abstractions/qt6 2a3ee46c6fb23f699698c0bb4e2bfdd1
 /etc/apparmor.d/abstractions/qt6-compose-cache-write 25936cd91d82ab739be7949d33736b9b
 /etc/apparmor.d/abstractions/qt6-settings-write e2d8e128c2138a2656d9d9adf1408f8d
 /etc/apparmor.d/abstractions/recent-documents-write 57bfcdf4fc0f790c4a51f2678f4fdd17
 /etc/apparmor.d/abstractions/ruby 647a1c14accb31774540d8b7e14811a5
 /etc/apparmor.d/abstractions/samba 80ac5ea6902855b6e9cc84cf90c86a23
 /etc/apparmor.d/abstractions/samba-rpcd dd45d69fae139d7d3121af8f2a28d884
 /etc/apparmor.d/abstractions/smbpass 98782c8623443b1ac4477222824526ee
 /etc/apparmor.d/abstractions/snap_browsers d62388a5173f6945ebb1f41b9ec5c07b
 /etc/apparmor.d/abstractions/ssl_certs 5bf050da765885e2e2c3440d1ffe2d6a
 /etc/apparmor.d/abstractions/ssl_keys f804c6623c0b8584153ca06051342c00
 /etc/apparmor.d/abstractions/svn-repositories f281784467cdf8f7f830337a5ba7f5c9
 /etc/apparmor.d/abstractions/terminfo d8f33832aa43cfbe19207384af0e3396
 /etc/apparmor.d/abstractions/transmission-common c1459adbbdbef0304bc0d1030fb55476
 /etc/apparmor.d/abstractions/trash 77f74bce1c671f56cf013ec880664499
 /etc/apparmor.d/abstractions/ubuntu-bittorrent-clients bc214039e36aed33834aefca14fcb9e1
 /etc/apparmor.d/abstractions/ubuntu-browsers 1964f219262f91c8b97b3cab3c5b1a15
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/java a9387035914b3de93f96c99418dd306a
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/kde fb384b79814196058f69c581734c2bf3
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/mailto 8ee5eeea9b891d9dd037cb16b37605a6
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/multimedia e8cda78bbc9882532d0f3c8048e85d7c
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/plugins-common a015fbc234f8ecba0c1db8d1c50efb0b
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/productivity 6fbd4a5744bbd882c3eec994bc6d0fb0
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/text-editors 3d486fae7348f69946dfd58f5b6e9747
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/ubuntu-integration 3a29e910c7229ebf8efb8d7186d82f6f
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/ubuntu-integration-xul d0ff22a6313a0fbf4a4f7da7b5576307
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/user-files ad32d9011654972455c717bbe978b705
 /etc/apparmor.d/abstractions/ubuntu-console-browsers 6215673c66fd3e54cb6e1271f9aa0029
 /etc/apparmor.d/abstractions/ubuntu-console-email 0ff7d2311f36eba04ef50ec8261de8de
 /etc/apparmor.d/abstractions/ubuntu-email 3aef68a8ce2190e2b0c32f3889fe2fbb
 /etc/apparmor.d/abstractions/ubuntu-feed-readers 6d9f88c53a369529a5ff52573a051d90
 /etc/apparmor.d/abstractions/ubuntu-gnome-terminal 8063a4cbeb334a914c7bf2a65e5f2c3c
 /etc/apparmor.d/abstractions/ubuntu-helpers 765e4a4c6e05724fa6335c306dbd3ef8
 /etc/apparmor.d/abstractions/ubuntu-konsole 3226c189b7aacae0b2616827fac54510
 /etc/apparmor.d/abstractions/ubuntu-media-players edc01db2f2804479007c463b005d7708
 /etc/apparmor.d/abstractions/ubuntu-unity7-base 9f95ccd27db1a6d581f512b6d8045d13
 /etc/apparmor.d/abstractions/ubuntu-unity7-launcher 6a9c25f230ba41e8289514d9a8f0f87e
 /etc/apparmor.d/abstractions/ubuntu-unity7-messaging 69b93d5b6693179432ec7c33e1f30434
 /etc/apparmor.d/abstractions/ubuntu-xterm 7a896bda3883f05f19e46468fa01ec8b
 /etc/apparmor.d/abstractions/user-download 2c764a6e080a4549661404fe74d2bef2
 /etc/apparmor.d/abstractions/user-mail fc821b70bcb3f4735ae58cbc328f60cc
 /etc/apparmor.d/abstractions/user-manpages da6ee9a1273a3544813d0d280814ceb4
 /etc/apparmor.d/abstractions/user-tmp 637812127e85496565b15f092aa9028c
 /etc/apparmor.d/abstractions/user-write 5b2101d68ba7e9e1bb58b9806672ae5a
 /etc/apparmor.d/abstractions/video 8a9597db8db7dea3702c052a3378114b
 /etc/apparmor.d/abstractions/vulkan fdc603571a8600504f3dee14553e596b
 /etc/apparmor.d/abstractions/wayland d8ef4acb801443585a0fa309234b63d7
 /etc/apparmor.d/abstractions/web-data e46da21cb61d259f7410a72a32d2319d
 /etc/apparmor.d/abstractions/winbind 489fca3c058879cff0c69f160f453e82
 /etc/apparmor.d/abstractions/wutmp 40ffe49f2e745abc11c417a289c79dcb
 /etc/apparmor.d/abstractions/xad 40464a5c359d30d98d72702aba58255e
 /etc/apparmor.d/abstractions/xdg-desktop 5a0a148ee79a27a546e5618ecc17a0f8
 /etc/apparmor.d/abstractions/xdg-open 989de0df5dce3d28f223ec7e83288728
 /etc/apparmor.d/balena-etcher 41dc7a55c7739f6ca133d29413a414e0
 /etc/apparmor.d/brave c7e3828647deb93ba1524ba49f6b6c78
 /etc/apparmor.d/buildah 692a0246f1d9bde5bcd97a1c540ea4bf
 /etc/apparmor.d/busybox 69240224e4d5a5e2c6a7a9a84b39196f
 /etc/apparmor.d/cam d1ac502776782c6b264cda89a769b509
 /etc/apparmor.d/ch-checkns e6ed1d0331ec1651b1c117cfa791aca7
 /etc/apparmor.d/ch-run 4e8f28caf0d00397377439eb470caa0c
 /etc/apparmor.d/chrome 76e226068a9df356c67e7a3d470d1ebb
 /etc/apparmor.d/chromium 9bda08a9542da1fba8f05ad1c3965dc8
 /etc/apparmor.d/code 0f9bad29b9cf3ea8ab27f6b6f3796129
 /etc/apparmor.d/crun e098756fa8f9f1c8ca4049af47a74fd4
 /etc/apparmor.d/devhelp bd1226d7e9b4988bb3933684a4406914
 /etc/apparmor.d/element-desktop d39b0c4bff076ea329f5dbbaa82e2ba7
 /etc/apparmor.d/epiphany 6bda34c482685db22cea75a6ad7476ea
 /etc/apparmor.d/evolution b1f70bc4c650108fa213e8279225e0ec
 /etc/apparmor.d/firefox f1829bd518068599ea95e4b5a58b64c1
 /etc/apparmor.d/flatpak 6f8173f861fc3d78a5046d899d0b4b59
 /etc/apparmor.d/foliate c92d766801e2ac02123e0db70b97ea55
 /etc/apparmor.d/geary 6440c82a66a81d652075b99712a3cbda
 /etc/apparmor.d/github-desktop 2122e73f32672b2e657ae1458eb26727
 /etc/apparmor.d/goldendict de9f3bb31c80756ae55a31e8ed4a3be6
 /etc/apparmor.d/ipa_verify df74e854eac8b988f15d8b21f3f5ae44
 /etc/apparmor.d/kchmviewer b57ea6f66a082f50fc24ec3922bedd6f
 /etc/apparmor.d/keybase de653466fa5c38e2dd697794250c10a9
 /etc/apparmor.d/lc-compliance c6602ecb174135de2520abe7e2d66aeb
 /etc/apparmor.d/libcamerify d61830a55b0f5803dcb120e38ff514da
 /etc/apparmor.d/linux-sandbox 03ce2ec6971f9afeee6f7c2e9688baac
 /etc/apparmor.d/local/README c2697f764b5164f3b9195857290df7df
 /etc/apparmor.d/loupe 9cd53d4893feabf3a85bed91253b520f
 /etc/apparmor.d/lsb_release e658932af849b5084d780d69b792d6f6
 /etc/apparmor.d/lxc-attach 8e84c6f99b66f14957215c1ca65df341
 /etc/apparmor.d/lxc-create 9c61264b7dcdec579c99143f3b219cdb
 /etc/apparmor.d/lxc-destroy 3c5bf3780350b4854af5f6f1f6d86f39
 /etc/apparmor.d/lxc-execute 4727b3eba3181e290839953309d2db87
 /etc/apparmor.d/lxc-stop 4b96d873788cc6e9d064dd3bc495a4fe
 /etc/apparmor.d/lxc-unshare a9053aae62b0daa1d7fd9e62bafdcbeb
 /etc/apparmor.d/lxc-usernsexec 6bd0e80c5e92542b6b2d02352ee540ae
 /etc/apparmor.d/mmdebstrap a7e1ac1d7f16053f735f3b44a67840ee
 /etc/apparmor.d/msedge 285ddc96bdcca201f8ed35e38229a92a
 /etc/apparmor.d/nautilus 57287a789351c7416b3d96538253ced2
 /etc/apparmor.d/notepadqq 6c24799230bc8f06b33b3b461c7972c0
 /etc/apparmor.d/nvidia_modprobe 58c3ceb2fff91ebc2d14f8736651e8c0
 /etc/apparmor.d/obsidian 6bbf1654bfcd4ac1d702cd1adcfde542
 /etc/apparmor.d/opam 52c194ff83de698797647437047841d3
 /etc/apparmor.d/opera b09f37170593933806df51b1a2c136f9
 /etc/apparmor.d/pageedit c20709c6b0a79f13e964d92f7eb81a2f
 /etc/apparmor.d/plasmashell acb9b228db1a48a40babe30c5a720fbf
 /etc/apparmor.d/polypane b1cd95df33baaf4384ef5c14492ba096
 /etc/apparmor.d/privacybrowser dbb425e0980c7e1e9033b43aba864b76
 /etc/apparmor.d/qcam 5952fc84b00d8aec0e8e9d805bd31af2
 /etc/apparmor.d/qmapshack ce57b415f0b224b6b9e1674d3184568d
 /etc/apparmor.d/qutebrowser 1c9fc541582fe736ecc9b7eae42c20ad
 /etc/apparmor.d/rootlesskit a6718e232ff378f3271467a9124b4eea
 /etc/apparmor.d/rpm 1d6b51dd975371cc952856f4a3d625a6
 /etc/apparmor.d/rssguard cd9ed0429e53ea8b5d31e2d544585e5c
 /etc/apparmor.d/runc 7804e9ca52364d066d77b4e933a32e9d
 /etc/apparmor.d/sbuild aa6c48a176c7675b6379b3bc472f7b36
 /etc/apparmor.d/sbuild-abort 980aa7886c7d699fa82e00a05622f2ae
 /etc/apparmor.d/sbuild-adduser 112a248da646bc163dcd4c85cc513398
 /etc/apparmor.d/sbuild-apt a2760d995c3ed6351c6caa6036c77824
 /etc/apparmor.d/sbuild-checkpackages 28df04c2d77357791628b469d714b3cd
 /etc/apparmor.d/sbuild-clean 285348466992f20ba2c7f0be636582eb
 /etc/apparmor.d/sbuild-createchroot 60dd7e9294a900cb99ed562cd80b1697
 /etc/apparmor.d/sbuild-destroychroot 8fb5a5b82e1f063987637cb36f72e1c2
 /etc/apparmor.d/sbuild-distupgrade 7c03b762f860a178b2698f2692e72d58
 /etc/apparmor.d/sbuild-hold 977854e2589f32cdc821bc5273ca8992
 /etc/apparmor.d/sbuild-shell 4367cf117ad4d7c5ec799b5e28977fc3
 /etc/apparmor.d/sbuild-unhold 76bfc378e4c878a202c071ae483a1a0c
 /etc/apparmor.d/sbuild-update bb9fdcd6d13eeced28e306f04543a060
 /etc/apparmor.d/sbuild-upgrade acec41521c50aedd7dc9743f29e32437
 /etc/apparmor.d/scide 69d5df4d85f2d888fc6f3a2a02ae710e
 /etc/apparmor.d/signal-desktop 7e8b436217279ba903f2e9d84390a498
 /etc/apparmor.d/slack dcc561b40dfc7cd959533469d8a07083
 /etc/apparmor.d/slirp4netns 277e090c982c497832514e3cc8b225ba
 /etc/apparmor.d/steam 26615466c8cae2bfb8300d7474cb864c
 /etc/apparmor.d/stress-ng e3b5a8e8e142b48a79c4250371ac7a32
 /etc/apparmor.d/surfshark 1b389518cbaf6005b81044bd61424fe0
 /etc/apparmor.d/systemd-coredump fea0984f8368c0b1952b20b5d1727683
 /etc/apparmor.d/toybox 79e154a4d3eb631f3089396bd8713c5e
 /etc/apparmor.d/transmission 770afac60d6dce42130c7318a1eb702d
 /etc/apparmor.d/trinity 4a6f33f1d61c65a63138ad7f58e25d53
 /etc/apparmor.d/tunables/alias 3a4f5cae71b044f38c481adbe3642b33
 /etc/apparmor.d/tunables/apparmorfs e2074b490a25348fe38bb14a67189b50
 /etc/apparmor.d/tunables/dovecot 337ca6dc41c0ae4c156a7b111c946bb4
 /etc/apparmor.d/tunables/etc eaa7eb0aed2f57f233df1534219add7b
 /etc/apparmor.d/tunables/global 5bcd8895cb67489d5b619d24c14af7b1
 /etc/apparmor.d/tunables/home 18eda20e8b1a8d45955d582cd18dd621
 /etc/apparmor.d/tunables/home.d/site.local 3b274206fb06833ee3e151e351dad51b
 /etc/apparmor.d/tunables/kernelvars 1e1c274b547b8946eed0eff158300e03
 /etc/apparmor.d/tunables/multiarch 580f535cd1df7ac32d04cac4974274cd
 /etc/apparmor.d/tunables/multiarch.d/site.local 3c9eef1fbfb41fc452060086262e7bcb
 /etc/apparmor.d/tunables/proc 2065e74ad990713ead4b32002acdc82c
 /etc/apparmor.d/tunables/run 96ac843a343694802ade445fd351e43a
 /etc/apparmor.d/tunables/securityfs 94e4dd81e625ebb7e0ceb02fbd492612
 /etc/apparmor.d/tunables/share e11aafffd58011c5d832b98bc71372a7
 /etc/apparmor.d/tunables/sys 30f2fdf4695c26642ea02b5a2063cfbc
 /etc/apparmor.d/tunables/system 584175552218d1e2b143c27e4c193213
 /etc/apparmor.d/tunables/xdg-user-dirs 7eeab5e5987a04857db2f367b07ab4bb
 /etc/apparmor.d/tup 523fab6a982527f3477970aaa64b3e76
 /etc/apparmor.d/tuxedo-control-center 53cb9b6edee094984349ab0a1a38efda
 /etc/apparmor.d/unix-chkpwd e5ae1333886f1bead76b451a30cdc792
 /etc/apparmor.d/unprivileged_userns 5914011d9c5d9ac6454f3c0d704401ac
 /etc/apparmor.d/userbindmount 40677d9a5e9228b9203aa9b917b1dfab
 /etc/apparmor.d/uwsgi-core 1563f58f3bd1b679b27c5093b766daf4
 /etc/apparmor.d/vdens d5453365eeb2ef78bdabd230d2e528b6
 /etc/apparmor.d/virtiofsd 7a292c9bcbf7ed74ae7e3df8ad325b7b
 /etc/apparmor.d/vivaldi-bin 1838b1259fdf616a38b954132af05b30
 /etc/apparmor.d/vpnns 0f96d656c110471b7f355107b9e0d366
 /etc/apparmor.d/wike 5f663fc016cc49b2846bd749f0e54306
 /etc/apparmor.d/wpcom 8f77cd143ac7083c6678368773a21034
 /etc/apparmor/parser.conf d7e40e67ab0b99e89a8a81f15714b13b
 /etc/init.d/apparmor 42e157dc91f6554abefa2160c2bc42db
Description: user-space parser utility for AppArmor
 apparmor provides the system initialization scripts needed to use the
 AppArmor Mandatory Access Control system, including the AppArmor Parser
 which is required to convert AppArmor text profiles into machine-readable
 policies that are loaded into the kernel for use with the AppArmor Linux
 Security Module.
Homepage: https://apparmor.net/

Package: apt
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 4480
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: amd64
Version: 3.0.3
Replaces: apt-transport-https (<< 1.5~alpha4~), apt-utils (<< 1.3~exp2~)
Provides: apt-transport-https (= 3.0.3)
Depends: base-passwd (>= 3.6.1) | adduser, sqv (>= 1.3.0), libapt-pkg7.0 (>= 3.0.3), debian-archive-keyring, libc6 (>= 2.38), libgcc-s1 (>= 3.0), libseccomp2 (>= 2.4.2), libssl3t64 (>= 3.0.0), libstdc++6 (>= 13.1), libsystemd0
Recommends: ca-certificates
Suggests: apt-doc, aptitude | synaptic | wajig, dpkg-dev (>= 1.17.2), gnupg | gnupg2 | gnupg1, powermgmt-base
Breaks: apt-transport-https (<< 1.5~alpha4~), apt-utils (<< 1.3~exp2~), aptitude (<< 0.8.10)
Conflicts: apt-verify, libnettle8 (<< 3.9.1-2.2~)
Conffiles:
 /etc/apt/apt.conf.d/01autoremove 879455db9b938ce287b23383629aedce
 /etc/cron.daily/apt-compat 1400ab07a4a2905b04c33e3e93d42b7b
 /etc/logrotate.d/apt 179f2ed4f85cbaca12fa3d69c2a4a1c3
Description: commandline package manager
 This package provides commandline tools for searching and
 managing as well as querying information about packages
 as a low-level access to all features of the libapt-pkg library.
 .
 These include:
  * apt-get for retrieval of packages and information about them
    from authenticated sources and for installation, upgrade and
    removal of packages together with their dependencies
  * apt-cache for querying available information about installed
    as well as installable packages
  * apt-cdrom to use removable media as a source for packages
  * apt-config as an interface to the configuration settings
  * apt-extracttemplates is used by debconf to prompt for configuration
    questions before installation.

Package: apt-listchanges
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 553
Maintainer: Jonathan Kamens <jik@kamens.us>
Architecture: all
Multi-Arch: foreign
Version: 4.8
Depends: apt, python3-apt, python3-debconf, sensible-utils, ucf, debconf (>= 0.5) | debconf-2.0, python3:any
Suggests: default-mta | mail-transport-agent, python3-gi, www-browser, x-terminal-emulator
Conffiles:
 /etc/apt/apt.conf.d/20listchanges 105aa4aeb0527308bf3a0c70151d7684
Description: package change history notification tool
 The tool apt-listchanges can compare a new version of a
 package with the one currently installed and show what has been
 changed, by extracting the relevant entries from the Debian changelog
 and NEWS files.
 .
 It can be run on several .deb archives at a time to get a list of all
 changes that would be caused by installing or upgrading a group of
 packages. When configured as an APT plugin it will do this
 automatically during upgrades.
Homepage: https://salsa.debian.org/debian/apt-listchanges/

Package: apt-utils
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1086
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: amd64
Source: apt
Version: 3.0.3
Depends: apt (= 3.0.3), libapt-pkg7.0 (>= 2.9.27+exp1), libc6 (>= 2.34), libdb5.3t64, libgcc-s1 (>= 3.0), libstdc++6 (>= 13.1)
Description: package management related utility programs
 This package contains some less used commandline utilities related
 to package management with APT.
 .
  * apt-ftparchive is used to create Packages and other index files
    needed to publish an archive of Debian packages
  * apt-sortpkgs is a Packages/Sources file normalizer.

Package: atop
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 704
Maintainer: Marc Haber <atop@packages.debian.org>
Architecture: amd64
Version: 2.11.1-3
Depends: libc6 (>= 2.38), libglib2.0-0t64 (>= 2.12.0), libncursesw6 (>= 6), libtinfo6 (>= 6), zlib1g (>= 1:1.2.0)
Pre-Depends: init-system-helpers (>= 1.54~)
Recommends: cron | cron-daemon
Conffiles:
 /etc/cron.d/atop b87c00462cdeb6daa99a7ba0194d19b6
 /etc/default/atop cc501492119fc4d871ddae741b09ef51
 /etc/init.d/atop 250a9814cceca6b8c5f67f1f2997823d
 /etc/init.d/atopacct 379b5ddeee020e51c69508a4226ca2b3
Description: Monitor for system resources and process activity
 Atop is an ASCII full-screen performance monitor, similar to the top command,
 but atop only shows the active system-resources and processes, and only shows
 the deviations since the previous interval.  At regular intervals, it shows
 system-level activity related to the CPU, memory, swap, disks and network
 layers, and it shows for every active process the CPU utilization in system
 and user mode, the virtual and resident memory growth, priority, username,
 state, and exit code. The process level activity is also shown for processes
 which finished during the last interval, to get a complete overview about the
 consumers of things such as CPU time.
 .
  Author: Gerlof Langeveld <gerlof@ATComputing.nl>
Homepage: https://atoptool.nl/

Package: augeas-lenses
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 2017
Maintainer: Hilko Bengen <bengen@debian.org>
Architecture: all
Multi-Arch: foreign
Source: augeas
Version: 1.14.1-1.1~deb13u1
Suggests: augeas-doc
Description: Set of lenses needed by libaugeas0 to parse config files
 Augeas parses configuration files described in lenses into a tree structure,
 which it exposes through its public API. Changes made through the API are
 written back to the initially read files.
 .
 Lenses are the building blocks of the file <-> tree transformation; they
 combine parsing a file and building the tree (the get transformation), with
 turning the tree back into an (updated) file (the put transformation).
 .
 The transformation works very hard to preserve comments and formatting
 details. It is controlled by ``lens'' definitions that describe the file
 format and the transformation into a tree. This package includes the official
 set of lenses.
Homepage: http://augeas.net/

Package: autoconf
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 2197
Maintainer: Alex Myczko <tar@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2.72-3.1
Depends: perl (>> 5.005), m4 (>= 1.4.13), debianutils (>= 1.8)
Recommends: automake | automaken
Suggests: autoconf-archive, gnu-standards, autoconf-doc, libtool, gettext
Breaks: gettext (<< 0.10.39), pkg-config (<< 0.25-1.1)
Conffiles:
 /etc/emacs/site-start.d/50autoconf.el 297521889d690871ec9d89c5eeff745a
Description: automatic configure script builder
 The standard for FSF source packages.  This is only useful if you
 write your own programs or if you extensively modify other people's
 programs.
 .
 For an extensive library of additional Autoconf macros, install the
 `autoconf-archive' package.
 .
 This version of autoconf is not compatible with scripts meant for
 Autoconf 2.13 or earlier.
Homepage: https://www.gnu.org/software/autoconf/

Package: automake
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 1906
Maintainer: Eric Dorland <eric@debian.org>
Architecture: all
Multi-Arch: foreign
Source: automake-1.17
Version: 1:1.17-4
Provides: automake-1.16, automake-1.17, automaken
Depends: autoconf, autotools-dev
Suggests: autoconf-doc, gnu-standards
Description: Tool for generating GNU Standards-compliant Makefiles
 Automake is a tool for automatically generating `Makefile.in's from
 files called `Makefile.am'.
 .
 The goal of Automake is to remove the burden of Makefile maintenance
 from the back of the individual GNU maintainer (and put it on the back
 of the Automake maintainer).
 .
 The `Makefile.am' is basically a series of `make' macro definitions
 (with rules being thrown in occasionally).  The generated
 `Makefile.in's are compliant with the GNU Makefile standards.
Homepage: https://www.gnu.org/software/automake/

Package: autotools-dev
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 147
Maintainer: Henrique de Moraes Holschuh <hmh@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 20240727.1
Replaces: autoconf (<< 2.70~)
Breaks: autoconf (<< 2.70~)
Enhances: cdbs, debhelper
Description: Update infrastructure for config.{guess,sub} files
 This package installs an up-to-date version of config.guess and
 config.sub, used by the automake and libtool packages.  It provides
 the canonical copy of those files for other packages as well.
 .
 It also documents in /usr/share/doc/autotools-dev/README.Debian.gz
 best practices and guidelines for using autoconf, automake and
 friends on Debian packages.  This is a must-read for any developers
 packaging software that uses the GNU autotools, or GNU gettext.
 .
 Additionally this package provides seamless integration into Debhelper
 or CDBS, allowing maintainers to easily update config.{guess,sub} files
 in their packages.
Homepage: https://savannah.gnu.org/projects/config/

Package: base-files
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 500
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 13.8+deb13u7
Replaces: base, dpkg (<= 1.15.0), miscutils
Provides: base, usr-is-merged
Pre-Depends: awk
Breaks: debian-security-support (<< 2019.04.25), initscripts (<< 2.88dsf-13.3), sendfile (<< 2.1b.20080616-5.2~)
Conffiles:
 /etc/debian_version 5243b35d3894c513d1189360c303199a
 /etc/dpkg/origins/debian c47b6815f67ad1aeccb0d4529bd0b990
 /etc/host.conf 4eb63731c9f5e30903ac4fc07a7fe3d6
 /etc/issue d0c7919a5e2641d60400de08201a49e2
 /etc/issue.net 37827eb4e7d268f39255c01fc49b009e
 /etc/update-motd.d/10-uname 9e1b832b7b06f566156e7c9e0548247b
Description: Debian base system miscellaneous files
 This package contains the basic filesystem hierarchy of a Debian system, and
 several important miscellaneous files, such as /etc/debian_version,
 /etc/host.conf, /etc/issue, /etc/motd, /etc/profile, and others,
 and the text of several common licenses in use on Debian systems.

Package: base-passwd
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 272
Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 3.6.7
Replaces: base
Depends: libc6 (>= 2.34), libdebconfclient0 (>= 0.145), libselinux1 (>= 3.1~)
Recommends: debconf (>= 0.5) | debconf-2.0
Description: Debian base system master password and group files
 These are the canonical master copies of the user database files
 (/etc/passwd and /etc/group), containing the Debian-allocated user and
 group IDs. The update-passwd tool is provided to keep the system databases
 synchronized with these master files.

Package: bash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 7196
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: bash (5.2.37-2)
Version: 5.2.37-2+b10
Depends: base-files (>= 2.1.12), debianutils (>= 5.6-0.1)
Pre-Depends: libc6 (>= 2.38), libtinfo6 (>= 6)
Recommends: bash-completion
Suggests: bash-doc
Conffiles:
 /etc/bash.bashrc 72d453119aaa1e96c7c8a7a8fedcf582
 /etc/skel/.bash_logout 22bfb8c1dd94b5f3813a2b25da67463f
 /etc/skel/.bashrc ee35a240758f374832e809ae0ea4883a
 /etc/skel/.profile f4e81ade7d6f9fb342541152d08e7a97
Description: GNU Bourne Again SHell
 Bash is an sh-compatible command language interpreter that executes
 commands read from the standard input or from a file.  Bash also
 incorporates useful features from the Korn and C shells (ksh and csh).
 .
 Bash is ultimately intended to be a conformant implementation of the
 IEEE POSIX Shell and Tools specification (IEEE Working Group 1003.2).
 .
 The Programmable Completion Code, by Ian Macdonald, is now found in
 the bash-completion package.
Homepage: http://tiswww.case.edu/php/chet/bash/bashtop.html

Package: bash-completion
Status: install ok installed
Priority: standard
Section: shells
Installed-Size: 1952
Maintainer: Gabriel F. T. Gomes <gabriel@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1:2.16.0-7
Provides: dh-sequence-bash-completion
Conffiles:
 /etc/bash_completion a81b3f1cb197219b815942f4fc7fa94e
 /etc/bash_completion.d/000_bash_completion_compat.bash 3834d4b9bcbc9a8bdb847f1a6727ae7a
 /etc/profile.d/bash_completion.sh 3593c6b58d5ede41aedc83dff04c35f7
Description: programmable completion for the bash shell
 bash completion extends bash's standard completion behavior to achieve
 complex command lines with just a few keystrokes.  This project was
 conceived to produce programmable completion routines for the most
 common Linux/UNIX commands, reducing the amount of typing sysadmins
 and programmers need to do on a daily basis.
Homepage: https://github.com/scop/bash-completion

Package: bind9-dnsutils
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 525
Maintainer: Debian DNS Team <team+dns@tracker.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: bind9
Version: 1:9.20.29-1~deb13u1
Provides: dnsutils
Depends: bind9-host | host, bind9-libs (= 1:9.20.29-1~deb13u1), libc6 (>= 2.38), libedit2 (>= 2.11-20080614-0), libidn2-0 (>= 2.0.0), libjemalloc2 (>= 3.5.0), libkrb5-3 (>= 1.6.dfsg.2), libprotobuf-c1 (>= 1.0.0)
Description: Clients provided with BIND 9
 The Berkeley Internet Name Domain (BIND 9) implements an Internet domain
 name server.  BIND 9 is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package delivers various client programs related to DNS that are
 derived from the BIND 9 source tree.
 .
  - dig - query the DNS in various ways
  - nslookup - the older way to do it
  - nsupdate - perform dynamic updates (See RFC2136)
Homepage: https://www.isc.org/downloads/bind/

Package: bind9-host
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 141
Maintainer: Debian DNS Team <team+dns@tracker.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: bind9
Version: 1:9.20.29-1~deb13u1
Replaces: bind-host (<< 1:9.13.6~)
Provides: host
Depends: bind9-libs (= 1:9.20.29-1~deb13u1), libc6 (>= 2.38), libidn2-0 (>= 2.0.0)
Breaks: bind-host (<< 1:9.13.6~)
Description: DNS Lookup Utility
 This package provides the 'host' DNS lookup utility in the form that
 is bundled with the BIND 9 sources.
Homepage: https://www.isc.org/downloads/bind/

Package: bind9-libs
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 3657
Maintainer: Debian DNS Team <team+dns@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: bind9
Version: 1:9.20.29-1~deb13u1
Replaces: bind-libs (<< 1:9.13.6~)
Depends: libc6 (>= 2.38), libfstrm0 (>= 0.2.0), libgssapi-krb5-2 (>= 1.17), libjemalloc2 (>= 4.0.0), libjson-c5 (>= 0.15), libkrb5-3 (>= 1.6.dfsg.2), liblmdb0 (>= 0.9.7), libmaxminddb0 (>= 1.3.0), libnghttp2-14 (>= 1.12.0), libprotobuf-c1 (>= 1.0.1), libssl3t64 (>= 3.4.0), liburcu8t64 (>= 0.13.0), libuv1t64 (>= 1.38.0), libxml2 (>= 2.7.4), zlib1g (>= 1:1.1.4)
Breaks: bind-libs (<< 1:9.13.6~)
Description: Shared Libraries used by BIND 9
 The Berkeley Internet Name Domain (BIND 9) implements an Internet domain
 name server.  BIND 9 is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package contains a bundle of shared libraries used by BIND 9.
Homepage: https://www.isc.org/downloads/bind/

Package: binutils
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 1073
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Version: 2.44-3
Replaces: binutils-aarch64-linux-gnu (<< 2.43.90), binutils-common (<< 2.43.90), binutils-i686-linux-gnu (<< 2.43.90), binutils-riscv64-linux-gnu (<< 2.43.90), binutils-x86-64-linux-gnu (<< 2.43.90)
Provides: elf-binutils
Depends: libbinutils (= 2.44-3), libc6 (>= 2.38), libgcc-s1 (>= 3.3.1), libgprofng0 (>= 2.44), libstdc++6 (>= 13.1), binutils-common (= 2.44-3), binutils-x86-64-linux-gnu (= 2.44-3)
Suggests: binutils-doc (>= 2.44-3), gprofng-gui, binutils-gold
Breaks: binutils-aarch64-linux-gnu (<< 2.43.90), binutils-i686-linux-gnu (<< 2.43.90), binutils-riscv64-linux-gnu (<< 2.43.90), binutils-x86-64-linux-gnu (<< 2.43.90)
Conflicts: binutils-mingw-w64-i686 (<< 2.23.52.20130612-1+3), binutils-mingw-w64-x86-64 (<< 2.23.52.20130612-1+3), binutils-multiarch (<< 2.27-8), modutils (<< 2.4.19-1)
Conffiles:
 /etc/gprofng.rc 9ef0ad52fe3e0ad424927ad653d29983
Description: GNU assembler, linker and binary utilities
 The programs in this package are used to assemble, link and manipulate
 binary and object files.  They may be used in conjunction with a compiler
 and various libraries to build programs.
Homepage: https://www.gnu.org/software/binutils/

Package: binutils-common
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 16098
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: binutils
Version: 2.44-3
Replaces: binutils (<< 2.38.50.20220527-2), binutils-multiarch (<< 2.38.50.20220527-2)
Breaks: binutils (<< 2.38.50.20220527-2), binutils-multiarch (<< 2.38.50.20220527-2)
Conffiles:
 /etc/gprofng.rc d8f321679d2ce58b1399e4e6de17fcc9 remove-on-upgrade
Description: Common files for the GNU assembler, linker and binary utilities
 This package contains the localization files used by binutils packages for
 various target architectures and parts of the binutils documentation. It is
 not useful on its own.
Homepage: https://www.gnu.org/software/binutils/

Package: binutils-x86-64-linux-gnu
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 5990
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: binutils
Version: 2.44-3
Replaces: binutils (<< 2.29-6), binutils-dev (<< 2.38.50.20220609-2)
Depends: binutils-common (= 2.44-3), libbinutils (= 2.44-3), libc6 (>= 2.38), libctf-nobfd0 (>= 2.36), libctf0 (>= 2.36), libjansson4 (>= 2.14), libsframe1 (>= 2.41), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4)
Suggests: binutils-doc (= 2.44-3)
Breaks: binutils (<< 2.29-6), binutils-dev (<< 2.38.50.20220609-2)
Description: GNU binary utilities, for x86-64-linux-gnu target
 This package provides GNU assembler, linker and binary utilities
 for the x86-64-linux-gnu target.
 .
 You don't need this package unless you plan to cross-compile programs
 for x86-64-linux-gnu and x86-64-linux-gnu is not your native
 platform.
Homepage: https://www.gnu.org/software/binutils/

Package: bsd-mailx
Status: install ok installed
Priority: optional
Section: mail
Installed-Size: 169
Maintainer: Robert Luberda <robert@debian.org>
Architecture: amd64
Version: 8.1.2-0.20220412cvs-1.1
Provides: mail-reader, mailx
Depends: default-mta | mail-transport-agent, libbsd0 (>= 0.11.0), libc6 (>= 2.34), liblockfile1 (>= 1.0)
Conffiles:
 /etc/mail.rc 2bd8160a85f53c20e55ebd375fc89431
Description: simple mail user agent
 bsd-mailx is the traditional simple command-line-mode mail user agent.
 Even if you don't use it, it may be required by other programs.
 .
 The /usr/bin/mail command provided by this package is a very simple one,
 and does not include many features that can be found in more advanced
 mail user agents.
 .
 For example bsd-mailx DOES NOT support:
  - MIME           (i.e. no attachments, no UTF-8 or other charsets support);
  - SMTP protocol  (/usr/sbin/sendmail interface only is used);
  - POP3/IMAP      (bsd-mailx reads local mailboxes only);
  - maildir format (traditional mbox only format is supported).
 .
 If the above features are needed, please consider installing another package
 providing similar /usr/bin/mail interface:
  - s-nail package,
  - or mailutils package.

Package: bsdextrautils
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 339
Maintainer: Chris Hofstaedtler <zeha@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.41.5-0+deb13u1
Replaces: bsdmainutils (<< 12.1.3)
Depends: libc6 (>= 2.38), libsmartcols1 (= 2.41.5-0+deb13u1), libtinfo6 (>= 6)
Breaks: bsdmainutils (<< 12.1.3)
Description: extra utilities from 4.4BSD-Lite
 This package contains some extra BSD utilities: col, colcrt, colrm, column,
 hd, hexdump, look, ul.
 Other BSD utilities are provided by bsdutils and calendar.
Homepage: https://github.com/util-linux/util-linux

Package: bsdutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 401
Maintainer: Chris Hofstaedtler <zeha@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux (2.41.5-0+deb13u1)
Version: 1:2.41.5-0+deb13u1
Pre-Depends: libc6 (>= 2.38), libsystemd0 (>= 254)
Recommends: bsdextrautils
Description: basic utilities from 4.4BSD-Lite
 This package contains the bare minimum of BSD utilities needed for a Debian
 system: logger, renice, script, scriptlive, scriptreplay and wall. The
 remaining standard BSD utilities are provided by bsdextrautils.
Homepage: https://github.com/util-linux/util-linux

Package: build-essential
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 17
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Version: 12.12
Depends: libc6-dev | libc-dev, gcc (>= 4:14.2), g++ (>= 4:14.2), make, dpkg-dev (>= 1.22.11)
Description: Informational list of build-essential packages
 If you do not plan to build Debian packages, you don't need this
 package.  Starting with dpkg (>= 1.14.18) this package is required
 for building Debian packages.
 .
 This package contains an informational list of packages which are
 considered essential for building Debian packages.  This package also
 depends on the packages on that list, to make it easy to have the
 build-essential packages installed.
 .
 If you have this package installed, you only need to install whatever
 a package specifies as its build-time dependencies to build the
 package.  Conversely, if you are determining what your package needs
 to build-depend on, you can always leave out the packages this
 package depends on.
 .
 This package is NOT the definition of what packages are
 build-essential; the real definition is in the Debian Policy Manual.
 This package contains merely an informational list, which is all
 most people need.   However, if this package and the manual disagree,
 the manual is correct.

Package: bzip2
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 113
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.0.8-6
Replaces: libbz2 (<< 0.9.5d-3)
Depends: libbz2-1.0 (= 1.0.8-6), libc6 (>= 2.34)
Suggests: bzip2-doc
Description: high-quality block-sorting file compressor - utilities
 bzip2 is a freely available, patent free, data compressor.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding.  Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
Homepage: https://sourceware.org/bzip2/

Package: bzip2-doc
Status: install ok installed
Priority: optional
Section: doc
Installed-Size: 603
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: all
Multi-Arch: foreign
Source: bzip2
Version: 1.0.8-6
Replaces: bzip2 (<< 1.0.4-0ubuntu2)
Description: high-quality block-sorting file compressor - documentation
 This package contains the bzip2 user manual in HTML, PDF, PS and Texinfo
 formats.
 .
 bzip2 is a freely available, patent free, data compressor.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding.  Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
Homepage: https://sourceware.org/bzip2/

Package: ca-certificates
Status: install ok installed
Priority: standard
Section: misc
Installed-Size: 390
Maintainer: Julien Cristau <jcristau@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 20250419
Depends: openssl (>= 1.1.1), debconf (>= 0.5) | debconf-2.0
Breaks: ca-certificates-java (<< 20121112+nmu1)
Enhances: openssl
Description: Common CA certificates
 Contains the certificate authorities shipped with Mozilla's browser to allow
 SSL-based applications to check for the authenticity of SSL connections.
 .
 Please note that Debian can neither confirm nor deny whether the
 certificate authorities whose certificates are included in this package
 have in any way been audited for trustworthiness or RFC 3647 compliance.
 Full responsibility to assess them belongs to the local system
 administrator.

Package: cabextract
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 83
Maintainer: Eric Sharkey <sharkey@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.11-2
Depends: libc6 (>= 2.34), libmspack0t64 (>= 0.4)
Enhances: konqueror
Description: Microsoft Cabinet file unpacker
 Cabextract is a program which unpacks cabinet (.cab) files, which
 are a form of archive Microsoft uses to distribute their software
 and things like Windows Font Packs.

Package: certbot
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 169
Maintainer: Debian Let's Encrypt <team+letsencrypt@tracker.debian.org>
Architecture: all
Source: python-certbot
Version: 4.0.0-2+deb13u1
Replaces: letsencrypt
Provides: letsencrypt
Depends: python3-certbot (= 4.0.0-2+deb13u1), debconf (>= 0.5) | debconf-2.0, python3:any
Suggests: python-certbot-doc, python3-certbot-apache, python3-certbot-nginx
Conffiles:
 /etc/cron.d/certbot 284af9ad9d67d7d7e9092fdae2d86273
 /etc/letsencrypt/cli.ini d409bf370c29a96fe865b5536b2135da
 /etc/logrotate.d/certbot a815a66a333f2637c00055fcd44b02d4
Description: automatically configure HTTPS using Let's Encrypt
 The objective of Certbot, Let's Encrypt, and the ACME (Automated
 Certificate Management Environment) protocol is to make it possible
 to set up an HTTPS server and have it automatically obtain a
 browser-trusted certificate, without any human intervention. This is
 accomplished by running a certificate management agent on the web
 server.
 .
 This agent is used to:
 .
   - Automatically prove to the Let's Encrypt CA that you control the website
   - Obtain a browser-trusted certificate and set it up on your web server
   - Keep track of when your certificate is going to expire, and renew it
   - Help you revoke the certificate if that ever becomes necessary.
 .
 This package contains the main application, including the standalone
 and the manual authenticators.
Homepage: https://certbot.eff.org/

Package: cloud-guest-utils
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 71
Maintainer: Debian Cloud Team <debian-cloud@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: cloud-utils
Version: 0.33-1
Depends: e2fsprogs, fdisk, python3:any
Recommends: gdisk
Suggests: cloud-init
Description: cloud guest utilities
 This package contains programs useful inside cloud instance.
 It contains 'growpart' for resizing a partition during boot, which is normally
 done with the aid of cloud-init.
Homepage: https://launchpad.net/cloud-utils

Package: cloud-image-utils
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 66
Maintainer: Debian Cloud Team <debian-cloud@lists.debian.org>
Architecture: all
Source: cloud-utils
Version: 0.33-1
Depends: ca-certificates, e2fsprogs, file, genisoimage, qemu-utils, wget, python3:any
Recommends: distro-info
Suggests: mtools
Description: cloud image management utilities
 This package provides a useful set of utilities for working with cloud
 images.  It contains tools to help in modifying cloud images, running, and
 querying data related to cloud-images.
Homepage: https://launchpad.net/cloud-utils

Package: cloud-init
Status: deinstall ok config-files
Priority: optional
Section: admin
Installed-Size: 3141
Maintainer: Debian Cloud Team <debian-cloud@lists.debian.org>
Architecture: all
Version: 25.1.4-1+deb13u1
Config-Version: 25.1.4-1+deb13u1
Replaces: cloud-init-22.4.2
Depends: eject, fdisk | util-linux (<< 2.29.2-3~), gdisk, dhcpcd-base | udhcpc | isc-dhcp-client, locales, lsb-release, netcat-openbsd, procps, python3-configobj, python3-jinja2, python3-jsonpatch, python3-jsonschema, python3-oauthlib, python3-requests, python3-yaml, python3:any
Recommends: cloud-guest-utils, eatmydata, sudo
Suggests: btrfs-progs, e2fsprogs, python3-passlib, xfsprogs
Conflicts: cloud-init-22.4.2, firewalld
Conffiles:
 /etc/cloud/cloud.cfg 2cce71be45160aaa4994cd5d59bc6d1d
 /etc/cloud/cloud.cfg.d/05_logging.cfg a7649f3a7332b9e9e0511dfa195d0212
 /etc/cloud/cloud.cfg.d/README f5175bd4df5c37ce781f93d20f59561a
 /etc/cloud/templates/chef_client.rb.tmpl a0844ddc9a42776d41a03d62d10ea139
 /etc/cloud/templates/chrony.conf.almalinux.tmpl 2b0c99a31899253b34b47bd268f71fb4
 /etc/cloud/templates/chrony.conf.alpine.tmpl 21bb9d935203b2c6b6e48e9bc1f19edf
 /etc/cloud/templates/chrony.conf.centos.tmpl 2b0c99a31899253b34b47bd268f71fb4
 /etc/cloud/templates/chrony.conf.cloudlinux.tmpl 2b0c99a31899253b34b47bd268f71fb4
 /etc/cloud/templates/chrony.conf.cos.tmpl 2e9b606515d8ff657da32ae0f4ccdac1
 /etc/cloud/templates/chrony.conf.debian.tmpl 4c8532b3e1eebdb394c3ba55023ad823
 /etc/cloud/templates/chrony.conf.fedora.tmpl dc525caa704a06d4ba2bcd5cdb7b62b4
 /etc/cloud/templates/chrony.conf.freebsd.tmpl ff57b67c379e6c79ed04a56b8a254720
 /etc/cloud/templates/chrony.conf.opensuse-leap.tmpl 6528e9df5f2d117578155200e5a95372
 /etc/cloud/templates/chrony.conf.opensuse-microos.tmpl 6528e9df5f2d117578155200e5a95372
 /etc/cloud/templates/chrony.conf.opensuse-tumbleweed.tmpl 6528e9df5f2d117578155200e5a95372
 /etc/cloud/templates/chrony.conf.opensuse.tmpl 6528e9df5f2d117578155200e5a95372
 /etc/cloud/templates/chrony.conf.photon.tmpl dc525caa704a06d4ba2bcd5cdb7b62b4
 /etc/cloud/templates/chrony.conf.rhel.tmpl 2b0c99a31899253b34b47bd268f71fb4
 /etc/cloud/templates/chrony.conf.rocky.tmpl 2b0c99a31899253b34b47bd268f71fb4
 /etc/cloud/templates/chrony.conf.sle-micro.tmpl 6528e9df5f2d117578155200e5a95372
 /etc/cloud/templates/chrony.conf.sle_hpc.tmpl 6528e9df5f2d117578155200e5a95372
 /etc/cloud/templates/chrony.conf.sles.tmpl 6528e9df5f2d117578155200e5a95372
 /etc/cloud/templates/chrony.conf.ubuntu.tmpl 981b6e81533cbfe2011a72cf83f0f858
 /etc/cloud/templates/hosts.alpine.tmpl ebd6639b19c7cad09a9d26cc3f0e87fb
 /etc/cloud/templates/hosts.aosc.tmpl 52a0f0b61020f43501fb2df8e4d43d78
 /etc/cloud/templates/hosts.arch.tmpl 8721e41953e3d91348b3bb9a17208c1a
 /etc/cloud/templates/hosts.azurelinux.tmpl 8b32f0f7bec51a9b38038afc3cb30174
 /etc/cloud/templates/hosts.debian.tmpl 941773df489d046d87ae491c3c95d8ec
 /etc/cloud/templates/hosts.freebsd.tmpl b93d8b13209900227fd7e1731ae23b0c
 /etc/cloud/templates/hosts.gentoo.tmpl de3df962ed420b5fa8ad0b338b8f262b
 /etc/cloud/templates/hosts.mariner.tmpl efe7d77432bb8a0726cd67c248c5d824
 /etc/cloud/templates/hosts.photon.tmpl 236edf211d757237c91834a5316dd083
 /etc/cloud/templates/hosts.redhat.tmpl bd5a1edd50c1d8b27c5f51ed44040c19
 /etc/cloud/templates/hosts.suse.tmpl 7a535f28d538e6bccaaa4dd7b9dd13c8
 /etc/cloud/templates/ntp.conf.almalinux.tmpl ede6809854d8767251e947d425f47eb3
 /etc/cloud/templates/ntp.conf.alpine.tmpl 72ab2dadd37b2afb1bfd7a002c30bdae
 /etc/cloud/templates/ntp.conf.cloudlinux.tmpl ede6809854d8767251e947d425f47eb3
 /etc/cloud/templates/ntp.conf.debian.tmpl ffffa430eb391dc04f3b732b31c830dc
 /etc/cloud/templates/ntp.conf.fedora.tmpl 0af38f6ab6df1b9cb007fc4a3bda7d76
 /etc/cloud/templates/ntp.conf.freebsd.tmpl 890f9f7536d187ed40a009f9ccd7011d
 /etc/cloud/templates/ntp.conf.opensuse.tmpl c0e6d499119291d838478c1fcf69b7d8
 /etc/cloud/templates/ntp.conf.photon.tmpl ede6809854d8767251e947d425f47eb3
 /etc/cloud/templates/ntp.conf.rhel.tmpl 768aa847ff2bf1ae6972718da754a3f2
 /etc/cloud/templates/ntp.conf.rocky.tmpl ede6809854d8767251e947d425f47eb3
 /etc/cloud/templates/ntp.conf.sles.tmpl c0e6d499119291d838478c1fcf69b7d8
 /etc/cloud/templates/ntp.conf.ubuntu.tmpl c4917fcac8096871f30136d046d2dade
 /etc/cloud/templates/ntpd.conf.openbsd.tmpl 71f53f45ca254d2abd3b48a17879b1d5
 /etc/cloud/templates/resolv.conf.tmpl a32413c9f622d5dfa784ef43e3e9e2be
 /etc/cloud/templates/sources.list.debian.deb822.tmpl 1179d72e4e1ea981968beaaf3740c09e
 /etc/cloud/templates/sources.list.debian.tmpl a7e69f77a32f15648cee0423fd1ed2bd
 /etc/cloud/templates/sources.list.ubuntu.deb822.tmpl 4531340ef6e63ffeda6c35e8cf219bfd
 /etc/cloud/templates/sources.list.ubuntu.tmpl d6b118c48d33b72eb035f8c673292923
 /etc/cloud/templates/systemd.resolved.conf.tmpl a454bfaea86f3758d0078819985d711c
 /etc/cloud/templates/timesyncd.conf.tmpl 9c6b3af8058efc219987863f45bb9198
 /etc/init.d/cloud-config a7405b87db8157de1090b8617ad893a4
 /etc/init.d/cloud-final 4e0a881043630da421024ad62d41dabc
 /etc/init.d/cloud-init-local 4c3fb25e0e0052077a86cd6af0d98b0c
 /etc/init.d/cloud-init-main dd06a356e63a1aa6649564d41189c6fd
 /etc/logrotate.d/cloud-init d05104a2bceea6b8132da35dfabef104
 /etc/profile.d/Z99-cloud-locale-test.sh 723364a6fa4178e87d79419dc15202fd
 /etc/systemd/system/sshd-keygen@.service.d/disable-sshd-keygen-if-cloud-init-active.conf e7c2c31c4ceae9e9a4a5c4ef1c165727 obsolete
 /etc/init.d/cloud-init 81e6e95a2d2c8a45ea5b1ac4bc11e491 obsolete
 /etc/dhcp/dhclient-exit-hooks.d/hook-dhclient aa6f407b6895c130f2809755373e739f obsolete
 /etc/cloud/templates/host.mariner.tmpl 12321ebb370f349597bf08c8b66d870f obsolete
 /etc/cloud/clean.d/README 022cf5eee551fc4956f021dac31dc939 obsolete
 /etc/NetworkManager/dispatcher.d/cloud-init-hook-network-manager 5fe06610f28360e90a8c04febddd384b obsolete
Description: initialization system for infrastructure cloud instances
 Cloud-init provides a framework and tool to configure and customize virtual
 machine instances for Infrastructure-as-a-Service (IaaS) clouds platforms. It
 can for example set a default locale and hostname, generate SSH private host
 keys, install SSH public keys for logging into a default account, set up
 ephemeral mount points, and run user-provided scripts.
 .
 Various methods are supported for passing data to the instance at launch
 time, including the standard interfaces of multiple platforms.
Homepage: https://launchpad.net/cloud-init

Package: cloud-initramfs-growroot
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 21
Maintainer: Debian Cloud <debian-cloud@lists.debian.org>
Architecture: all
Source: cloud-initramfs-tools
Version: 0.18.debian14
Depends: cloud-utils (>= 0.26-2~), initramfs-tools, fdisk | util-linux (<< 2.29.2-3~)
Description: automatically resize the root partition on first boot
 This package adds functionality to an initramfs built by initramfs-tools.
 When installed, the initramfs will repartition a disk to make the
 root volume consume all space that follows it.
 .
 You most likely do not want this package unless you know what you are
 doing.  It is primarily interesting in a virtualized environment when
 a disk can provisioned with a size larger than its original size.
 In this case, with this package installed, you can automatically use
 the new space without requiring a reboot to re-read the partition table.
Homepage: https://launchpad.net/cloud-initramfs-tools

Package: cloud-utils
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 20
Maintainer: Debian Cloud Team <debian-cloud@lists.debian.org>
Architecture: all
Version: 0.33-1
Depends: cloud-guest-utils, cloud-image-utils
Description: metapackage for installation of upstream cloud-utils source
 This metapackage will depend on all sub-packages built by the
 upstream cloud-utils source.
Homepage: https://launchpad.net/cloud-utils

Package: containerd.io
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 86930
Maintainer: Containerd team <help@containerd.io>
Architecture: amd64
Version: 2.4.2-2~debian.12~bookworm
Replaces: containerd, runc
Provides: containerd, runc
Depends: libc6 (>= 2.34), libseccomp2 (>= 2.5.0)
Conflicts: containerd, runc
Conffiles:
 /etc/containerd/config.toml 1d862b12f2cb082816175b28ee501789
Description: An open and reliable container runtime
Homepage: https://containerd.io

Package: coreutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 18457
Maintainer: Michael Stone <mstone@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 9.7-3
Pre-Depends: libacl1 (>= 2.2.23), libattr1 (>= 1:2.4.48), libc6 (>= 2.38), libcap2 (>= 1:2.10), libgmp10 (>= 2:6.3.0+dfsg), libselinux1 (>= 3.1~), libssl3t64 (>= 3.0.0), libsystemd0 (>= 254)
Description: GNU core utilities
 This package contains the basic file, shell and text manipulation
 utilities which are expected to exist on every operating system.
 .
 Specifically, this package includes:
 arch base64 basename cat chcon chgrp chmod chown chroot cksum comm cp
 csplit cut date dd df dir dircolors dirname du echo env expand expr
 factor false flock fmt fold groups head hostid id install join link ln
 logname ls md5sum mkdir mkfifo mknod mktemp mv nice nl nohup nproc numfmt
 od paste pathchk pinky pr printenv printf ptx pwd readlink realpath rm
 rmdir runcon sha*sum seq shred sleep sort split stat stty sum sync tac
 tail tee test timeout touch tr true truncate tsort tty uname unexpand
 uniq unlink users vdir wc who whoami yes
Homepage: https://gnu.org/software/coreutils

Package: cpio
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 1197
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.15+dfsg-2
Replaces: cpio-mt
Depends: libc6 (>= 2.38)
Suggests: libarchive-dev
Conflicts: cpio-mt, mt-st (<< 0.6)
Description: GNU cpio -- a program to manage archives of files
 GNU cpio is a tool for creating and extracting archives, or copying
 files from one place to another.  It handles a number of cpio formats
 as well as reading and writing tar files.
Homepage: https://www.gnu.org/software/cpio/

Package: cpp
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 18
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: gcc-defaults (1.220)
Version: 4:14.2.0-1
Depends: cpp-14 (>= 14.2.0-6~), cpp-x86-64-linux-gnu (= 4:14.2.0-1)
Suggests: cpp-doc
Conflicts: cpp-doc (<< 1:2.95.3), gcc (<< 4:13.2.0-3)
Description: GNU C preprocessor (cpp)
 The GNU C preprocessor is a macro processor that is used automatically
 by the GNU C compiler to transform programs before actual compilation.
 .
 This package has been separated from gcc for the benefit of those who
 require the preprocessor but not the compiler.
 .
 This is a dependency package providing the default GNU C preprocessor.

Package: cpp-12
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 34374
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Source: gcc-12
Version: 12.4.0-5
Depends: gcc-12-base (= 12.4.0-5), libc6 (>= 2.38), libgmp10 (>= 2:6.3.0+dfsg), libisl23 (>= 0.15), libmpc3 (>= 1.1.0), libmpfr6 (>= 3.1.3), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4)
Suggests: gcc-12-locales (>= 12), cpp-12-doc (>= 12)
Breaks: hardening-wrapper (<< 2.8+nmu3), libmagics++-dev (<< 2.28.0-4)
Description: GNU C preprocessor
 A macro processor that is used automatically by the GNU C compiler
 to transform programs before actual compilation.
 .
 This package has been separated from gcc for the benefit of those who
 require the preprocessor but not the compiler.
Homepage: http://gcc.gnu.org/

Package: cpp-14
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 11
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Source: gcc-14
Version: 14.2.0-19
Depends: gcc-14-base (= 14.2.0-19), cpp-14-x86-64-linux-gnu (= 14.2.0-19)
Suggests: gcc-14-locales (>= 14)
Breaks: hardening-wrapper (<< 2.8+nmu3), libmagics++-dev (<< 2.28.0-4)
Description: GNU C preprocessor
 A macro processor that is used automatically by the GNU C compiler
 to transform programs before actual compilation.
 .
 This package has been separated from gcc for the benefit of those who
 require the preprocessor but not the compiler.
Homepage: http://gcc.gnu.org/

Package: cpp-14-x86-64-linux-gnu
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 34503
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gcc-14
Version: 14.2.0-19
Depends: gcc-14-base (= 14.2.0-19), libc6 (>= 2.38), libgmp10 (>= 2:6.3.0+dfsg), libisl23 (>= 0.15), libmpc3 (>= 1.1.0), libmpfr6 (>= 3.1.3), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4)
Suggests: gcc-14-locales (>= 14), cpp-14-doc (>= 14)
Breaks: hardening-wrapper (<< 2.8+nmu3), libmagics++-dev (<< 2.28.0-4)
Description: GNU C preprocessor for x86_64-linux-gnu
 A macro processor that is used automatically by the GNU C compiler
 to transform programs before actual compilation.
 .
 This package has been separated from gcc for the benefit of those who
 require the preprocessor configured for x86_64-linux-gnu architecture but not
 the compiler.
Homepage: http://gcc.gnu.org/

Package: cpp-x86-64-linux-gnu
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 17
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gcc-defaults (1.220)
Version: 4:14.2.0-1
Replaces: cpp (<< 4:13.2.0-3)
Depends: cpp-14-x86-64-linux-gnu (>= 14.2.0-6~)
Suggests: cpp-doc
Breaks: cpp (<< 4:13.2.0-3)
Description: GNU C preprocessor (cpp) for the amd64 architecture
 The GNU C preprocessor is a macro processor that is used automatically
 by the GNU C compiler to transform programs before actual compilation.
 .
 This package has been separated from gcc for the benefit of those who
 require the preprocessor but not the cross-compiler for amd64 architecture.
 .
 This is a dependency package providing the default GNU C preprocessor
 for the amd64 architecture.

Package: cron
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 249
Maintainer: Georges Khaznadar <georgesk@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 3.0pl1-197
Replaces: bcron, cronie, systemd-cron
Provides: cron-daemon
Depends: libc6 (>= 2.34), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), sensible-utils, libpam-runtime
Pre-Depends: init-system-helpers (>= 1.54~), cron-daemon-common
Recommends: default-mta | mail-transport-agent
Suggests: anacron, logrotate, checksecurity, supercat, bat
Conflicts: bcron, cronie, systemd-cron
Conffiles:
 /etc/default/cron c3a7b773d9234e1948c5885753bb7c05
 /etc/init.d/cron af02c6044a6166137218843d7556e2fd
 /etc/pam.d/cron 11e788a7f7cd5477b10da2c7fd5ecdf0
 /etc/supercat/spcrc-crontab f4a36df1ac8298dc249f712026bafff8
 /etc/supercat/spcrc-crontab-light ed8b59882050d7de508a1eab088734e9
Description: process scheduling daemon
 The cron daemon is a background process that runs particular programs at
 particular times (for example, every minute, day, week, or month), as
 specified in a crontab. By default, users may also create crontabs of
 their own so that processes are run on their behalf.
 .
 Output from the commands is usually mailed to the system administrator
 (or to the user in question); you should probably install a mail system
 as well so that you can receive these messages.
 .
 This cron package does not provide any system maintenance tasks. Basic
 periodic maintenance tasks are provided by other packages, such
 as checksecurity.
Homepage: https://ftp.isc.org/isc/cron/

Package: cron-daemon-common
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 56
Maintainer: Georges Khaznadar <georgesk@debian.org>
Architecture: all
Multi-Arch: foreign
Source: cron
Version: 3.0pl1-197
Replaces: bcron (<< 0.11-9.1), cron (<< 3.0pl1-140), cronie (<< 1.6.1-5), systemd-cron (<< 1.15.18-1.1)
Depends: systemd | systemd-standalone-sysusers | systemd-sysusers, adduser
Breaks: systemd-cron (<< 1.15.19-5~)
Conflicts: bcron (<< 0.11-9.1), cron (<< 3.0pl1-140), cronie (<< 1.6.1-5), systemd-cron (<< 1.15.18-1.1)
Conffiles:
 /etc/cron.d/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.daily/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.hourly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.monthly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.weekly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.yearly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/crontab e34d8e317f0057ea65f179d5b35d699c
Description: process scheduling daemon's configuration files
 The cron daemon is a background process that runs particular programs at
 particular times (for example, every minute, day, week, or month), as
 specified in a crontab. By default, users may also create crontabs of
 their own so that processes are run on their behalf.
 .
 This package provides configuration files which must be there to
 define scheduled process sets.
Homepage: https://ftp.isc.org/isc/cron/

Package: curl
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 495
Maintainer: Debian Curl Maintainers <team+curl@tracker.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 8.14.1-2+deb13u7
Depends: libc6 (>= 2.34), libcurl4t64 (= 8.14.1-2+deb13u7), zlib1g (>= 1:1.1.4)
Recommends: bash-completion
Description: command line tool for transferring data with URL syntax
 curl is a command line tool for transferring data with URL syntax, supporting
 DICT, FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3,
 POP3S, RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 curl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP form
 based upload, proxies, cookies, user+password authentication (Basic, Digest,
 NTLM, Negotiate, kerberos...), file transfer resume, proxy tunneling and a
 busload of other useful tricks.
Homepage: https://curl.se/

Package: dash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 207
Maintainer: Andrej Shadura <andrewsh@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 0.5.12-12
Depends: debianutils (>= 5.6-0.1)
Pre-Depends: libc6 (>= 2.38)
Description: POSIX-compliant shell
 The Debian Almquist Shell (dash) is a POSIX-compliant shell derived
 from ash.
 .
 Since it executes scripts faster than bash, and has fewer library
 dependencies (making it more robust against software or hardware
 failures), it is used as the default system shell on Debian systems.
Homepage: http://gondor.apana.org.au/~herbert/dash/

Package: dbus
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 154
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.16.2-2
Provides: dbus-system-bus (= 1.16.2-2), default-dbus-system-bus
Depends: dbus-bin (= 1.16.2-2), dbus-daemon (= 1.16.2-2), dbus-system-bus-common (>= 1.16.2-2), base-files (>= 13.4~), libc6 (>= 2.34), libdbus-1-3 (= 1.16.2-2), libexpat1 (>= 2.1~beta3), libsystemd0
Pre-Depends: init-system-helpers (>= 1.54~)
Suggests: default-dbus-session-bus | dbus-session-bus
Conffiles:
 /etc/default/dbus 0d0f25a2f993509c857eb262f6e22015
 /etc/init.d/dbus d78b20b35de983cf6f1475dcf8cb21a1
Description: simple interprocess messaging system (system message bus)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more. It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML. D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 It comes with several bindings, including GLib, Python, Qt and Java.
 .
 This package provides a fully-functional D-Bus system bus with activation
 support, used for communication between system services, and depends on
 most of the other components of the reference implementation of D-Bus.
 .
 To provide a complete D-Bus session bus, install one of the packages
 that implement the dbus-session-bus virtual package, such as
 dbus-user-session. The recommended implementation is indicated by
 the default-dbus-session-bus virtual package.
Homepage: https://dbus.freedesktop.org/

Package: dbus-bin
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 190
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: dbus
Version: 1.16.2-2
Replaces: dbus (<< 1.13.18-2~)
Depends: libc6 (>= 2.38), libdbus-1-3 (= 1.16.2-2)
Breaks: dbus (<< 1.13.18-2~)
Description: simple interprocess messaging system (command line utilities)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package contains the D-Bus command-line utilities such as dbus-send
 and dbus-monitor.
Homepage: https://dbus.freedesktop.org/

Package: dbus-daemon
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 352
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: dbus
Version: 1.16.2-2
Replaces: dbus (<< 1.13.18-2~)
Depends: dbus-bin (= 1.16.2-2), dbus-session-bus-common (>= 1.16.2-2), libapparmor1 (>= 2.8.94), libaudit1 (>= 1:2.2.1), libc6 (>= 2.34), libcap-ng0 (>= 0.7.9), libdbus-1-3 (= 1.16.2-2), libexpat1 (>= 2.1~beta3), libselinux1 (>= 3.1~), libsystemd0
Breaks: dbus (<< 1.13.18-2~)
Description: simple interprocess messaging system (reference message bus)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package contains dbus-daemon, the reference implementation of a
 D-Bus message bus, and dbus-run-session, a utility to start a temporary
 session dbus-daemon in a constrained environment or for automated tests.
 .
 To provide a complete D-Bus session bus, install one of the packages
 that implement the dbus-session-bus virtual package, such as
 dbus-user-session. The recommended implementation is indicated by
 the default-dbus-session-bus virtual package.
Homepage: https://dbus.freedesktop.org/

Package: dbus-session-bus-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 80
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: dbus
Version: 1.16.2-2
Replaces: dbus (<< 1.13.18-2~)
Breaks: dbus (<< 1.13.18-2~)
Description: simple interprocess messaging system (session bus configuration)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package contains the configuration files defining the behaviour of
 the D-Bus session bus, used for applications and per-user services.
 These are used by the reference implementation in the dbus package,
 and by the reimplementation in the dbus-broker package.
 .
 To provide a complete D-Bus session bus, install one of the packages
 that implement the dbus-session-bus virtual package, such as
 dbus-user-session. The recommended implementation is indicated by
 the default-dbus-session-bus virtual package.
Homepage: https://dbus.freedesktop.org/

Package: dbus-system-bus-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 91
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: dbus
Version: 1.16.2-2
Replaces: dbus (<< 1.13.18-2~)
Depends: adduser (>= 3.130) | systemd-sysusers
Breaks: dbus (<< 1.13.18-2~)
Description: simple interprocess messaging system (system bus configuration)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package contains the configuration files defining the behaviour of
 the D-Bus system bus, used for system services such as networking and
 storage management services. It is also responsible for creating the
 'messagebus' system user account used to run the system bus.
 These are used by the reference implementation in the dbus package,
 and by the reimplementation in the dbus-broker package.
 .
 To provide a complete D-Bus system bus, install one of the packages
 that implement the dbus-system-bus virtual package, such as dbus.
 The recommended implementation is indicated by the default-dbus-system-bus
 virtual package.
Homepage: https://dbus.freedesktop.org/

Package: dbus-user-session
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 84
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: dbus
Version: 1.16.2-2
Provides: dbus-session-bus, default-dbus-session-bus
Depends: dbus-daemon (= 1.16.2-2) | dbus-broker, dbus-session-bus-common (>= 1.16.2-2), libpam-systemd, systemd
Recommends: systemd-sysv
Conffiles:
 /etc/X11/Xsession.d/20dbus_xdg-runtime f11c70d9f51a152cedf939d36ef038bf
Description: simple interprocess messaging system (systemd --user integration)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 On systemd systems, this package opts in to the session model in which
 a user's session starts the first time they log in, and does not end
 until all their login sessions have ended. This model merges all
 parallel non-graphical login sessions (text mode, ssh, cron, etc.), and up
 to one graphical session, into a single "user-session" or "super-session"
 within which all background D-Bus services are shared.
 .
 Multiple graphical sessions per user are not currently supported in this
 mode; as a result, it is particularly suitable for gdm, which responds to
 requests to open a parallel graphical session by switching to the existing
 graphical session and unlocking it.
 .
 To retain dbus' traditional session semantics, in which login sessions
 are artificially isolated from each other, remove this package and install
 dbus-x11 instead.
 .
 See the dbus package description for more information about D-Bus in general.
Homepage: https://dbus.freedesktop.org/

Package: debconf
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 497
Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.5.91
Replaces: debconf-tiny
Provides: debconf-2.0
Recommends: apt (>= 2.9.11~) | apt-utils, debconf-i18n
Suggests: debconf-doc, debconf-kde-helper, debconf-utils, libgtk3-perl, libnet-ldap-perl, libterm-readline-gnu-perl, perl, whiptail | dialog
Conflicts: debconf-tiny, whiptail-utf8 (<= 0.50.17-13)
Conffiles:
 /etc/apt/apt.conf.d/70debconf 7e9d09d5801a42b4926b736b8eeabb73
 /etc/debconf.conf 1cd82ead5651f0753b1ff6d9b31bd235
Description: Debian configuration management system
 Debconf is a configuration management system for debian packages. Packages
 use Debconf to ask questions when they are installed.

Package: debian-archive-keyring
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 302
Maintainer: Debian Release Team <packages@release.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2025.1
Conffiles:
 /etc/apt/trusted.gpg.d/debian-archive-bookworm-automatic.asc 55eec060916a9d4a0db7560ab4d7bdce
 /etc/apt/trusted.gpg.d/debian-archive-bookworm-security-automatic.asc bec0a1224f667bcd1e231b874db9bc4f
 /etc/apt/trusted.gpg.d/debian-archive-bookworm-stable.asc fac2ec9faba2c2d82c70a6e2805c5b79
 /etc/apt/trusted.gpg.d/debian-archive-bullseye-automatic.asc 1f30ce1ba8532d523017acb1a69c106a
 /etc/apt/trusted.gpg.d/debian-archive-bullseye-security-automatic.asc 9fbe7b0d8ebb38e240aeec6b0830ac7b
 /etc/apt/trusted.gpg.d/debian-archive-bullseye-stable.asc 85a4c0e5c747a38509b33562d4c950be
 /etc/apt/trusted.gpg.d/debian-archive-trixie-automatic.asc 556202307f6f23e343c1ba12790507be
 /etc/apt/trusted.gpg.d/debian-archive-trixie-security-automatic.asc f421db9e00d9a98c66c396b2a210f52c
 /etc/apt/trusted.gpg.d/debian-archive-trixie-stable.asc 91c5c0b4f6878239622087c64866c909
Description: OpenPGP archive certificates of the Debian archive
 The Debian project digitally signs its Release files. This package
 contains the archive certificates used for that.

Package: debianutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 225
Maintainer: Ileana Dumitrescu <ileanadumitrescu95@gmail.com>
Architecture: amd64
Multi-Arch: foreign
Version: 5.23.2
Pre-Depends: libc6 (>= 2.38)
Breaks: ifupdown (<< 0.8.36+nmu1), printer-driver-pnm2ppa (<< 1.13-12), x11-common (<< 1:7.7+23~)
Description: Miscellaneous utilities specific to Debian
 This package provides a number of small utilities which are used
 primarily by the installation scripts of Debian packages, although
 you may use them directly.
 .
 The specific utilities included are:
 add-shell installkernel ischroot remove-shell run-parts savelog
 update-shells which

Package: diffutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 1768
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: amd64
Version: 1:3.10-4
Replaces: diff
Pre-Depends: libc6 (>= 2.38)
Suggests: diffutils-doc, wdiff
Description: File comparison utilities
 The diffutils package provides the diff, diff3, sdiff, and cmp programs.
 .
 `diff' shows differences between two files, or each corresponding file
 in two directories.  `cmp' shows the offsets and line numbers where
 two files differ.  `cmp' can also show all the characters that
 differ between the two files, side by side.  `diff3' shows differences
 among three files.  `sdiff' merges two files interactively.
 .
 The set of differences produced by `diff' can be used to distribute
 updates to text files (such as program source code) to other people.
 This method is especially useful when the differences are small compared
 to the complete files.  Given `diff' output, the `patch' program can
 update, or "patch", a copy of the file.
Homepage: https://www.gnu.org/software/diffutils/

Package: dirmngr
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 967
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2 (2.4.7-21+deb13u1)
Version: 2.4.7-21+deb13u1+b5
Depends: adduser, gpgconf (= 2.4.7-21+deb13u1+b5), init-system-helpers (>= 1.52), libassuan9 (>= 2.5.0), libc6 (>= 2.38), libgcrypt20 (>= 1.11.0), libgnutls30t64 (>= 3.8.1), libgpg-error0 (>= 1.49), libksba8 (>= 1.6.3), libldap2 (>= 2.6.2), libnpth0t64 (>= 1.8)
Recommends: gnupg (= 2.4.7-21+deb13u1)
Suggests: dbus-user-session, libpam-systemd, pinentry-gnome3, tor
Enhances: gpg, gpgsm, squid
Description: GNU privacy guard - network certificate management service
 dirmngr is a server for managing and downloading OpenPGP and X.509
 certificates, as well as updates and status signals related to those
 certificates.  For OpenPGP, this means pulling from the public
 HKP/HKPS keyservers, or from LDAP servers.  For X.509 this includes
 Certificate Revocation Lists (CRLs) and Online Certificate Status
 Protocol updates (OCSP).  It is capable of using Tor for network
 access.
 .
 dirmngr is used for network access by gpg, gpgsm, and dirmngr-client,
 among other tools.  Unless this package is installed, the parts of
 the GnuPG suite that try to interact with the network will fail.
Homepage: https://www.gnupg.org/

Package: distro-info-data
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 19
Maintainer: Benjamin Drung <bdrung@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.66+deb13u2
Breaks: distro-info (<< 1.0~)
Description: information about the distributions' releases (data files)
 Information about all releases of Debian and Ubuntu. The distro-info script
 will give you the codename for e.g. the latest stable release of your
 distribution. To get information about a specific distribution there are the
 debian-distro-info and the ubuntu-distro-info scripts.
 .
 This package contains the data files.

Package: dkms
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 235
Maintainer: Dynamic Kernel Module System Team <dkms@packages.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 3.2.2-1~deb13u1
Provides: dkms-autopkgtest (= 3.2.2-1~deb13u1)
Depends: kmod, dpkg-dev, make | build-essential, patch
Recommends: gcc | c-compiler, fakeroot, sudo
Suggests: menu, e2fsprogs
Breaks: adv-17v35x-dkms (<< 5.0.7.0-1.0), asic0x-dkms (<< 1.0.1-1.0), aufs-dkms (<< 5.2+20190909-1.1.0), backfire-dkms (<< 1.0-1.0), batman-adv-dkms (<< 2011.1.0-1.0), batmand-gateway-dkms (<< 0.3.2-9.0), bbswitch-dkms (<< 0.8-12~), blcr-dkms (<< 0.8.6~b3-1.0), blktap-dkms (<< 2.0.93-0.10.0), broadcom-sta-dkms (<< 6.30.223.271-25.1~), dahdi-dkms (<< 1:3.1.0+git20230717~dfsg-10.1~), dpdk-igb-uio-dkms (<< 20.08-1.0), dpdk-rte-kni-dkms (<< 18.11.11-1.0), fglrx-modules-dkms (<< 1:15.12-2.0), flashcache-dkms (<< 3.1.3+git20150701-5.0), fuse4bsd-dkms (<< 0.3.9~pre1.20080208-8.0), iscsitarget-dkms (<< 1.4.20.3+svn502-2.0), kpatch-dkms (<< 0.6.0-0.2.0), mali-midgard-dkms (<< 16.0+pristine-4.0), nat-rtsp-dkms (<< 0.7+5.3-0.3~), ndiswrapper-dkms (<< 1.60-8.0), nvidia-kernel-dkms (<< 535.230), nvidia-tesla-535-kernel-dkms (<< 535.230), open-vm-tools-dkms (<< 2:10.1.15-1.0), openswan-modules-dkms (<< 1:2.6.38-1.0), openvswitch-datapath-dkms (<< 2.1.0+git20140411-3.0), oss4-dkms (<< 4.2-build2020-5~), sl-modem-dkms (<< 2.9.11~20110321-16.0), spl-dkms (<< 2.1), sysdig-dkms (<< 0.27.1-0.3.0), tp-smapi-dkms (<< 0.44-1.2~), virtualbox-dkms (<< 5), virtualbox-guest-dkms (<< 7), virtualbox-ose-dkms (<< 5), virtualbox-ose-guest-dkms (<< 5), wireguard-dkms (<< 1.0.20210606-1.0)
Conffiles:
 /etc/dkms/framework.conf b00acc9784d2b9eeecf04859814c11f1
 /etc/dkms/framework.conf.d/autoinstall_all_kernels.conf 286e4befeeacc4743650454dcae4c495
 /etc/kernel/header_postinst.d/dkms fc03dacfb23ec3159bd902bfe08eb467
 /etc/kernel/postinst.d/dkms fc03dacfb23ec3159bd902bfe08eb467
 /etc/kernel/preinst.d/dkms 5e1c5b7a9854f66ba241acddb8c16570
 /etc/kernel/prerm.d/dkms 836298635388feb06617728d25625d0d
 /etc/modprobe.d/dkms.conf 74452a1f23577a0bb30d764a895429d0
Description: Dynamic Kernel Module System (DKMS)
 DKMS is a framework designed to allow individual kernel modules to be upgraded
 without changing the whole kernel. It is also very easy to rebuild modules as
 you upgrade kernels.
Homepage: https://github.com/dell/dkms

Package: dmidecode
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 229
Maintainer: Jörg Frings-Fürst <debian@jff.email>
Architecture: amd64
Multi-Arch: foreign
Version: 3.6-2
Depends: libc6 (>= 2.34)
Description: SMBIOS/DMI table decoder
 Dmidecode reports information about the system's hardware as described in the
 system BIOS according to the SMBIOS/DMI standard.
 .
 This information typically includes system manufacturer, model name, serial
 number, BIOS version, asset tag as well as a lot of other details of varying
 level of interest and reliability depending on the manufacturer. This will
 often include usage status for the CPU sockets, expansion slots (e.g. AGP, PCI,
 ISA) and memory module slots, and the list of I/O ports (e.g. serial, parallel,
 USB).
 .
 Beware that DMI data have proven to be too unreliable to be blindly trusted.
 Dmidecode does not scan the hardware, it only reports what the BIOS told it to.
Homepage: https://nongnu.org/dmidecode/

Package: dmsetup
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 243
Maintainer: Debian LVM Team <team+lvm@tracker.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: lvm2 (2.03.31-2)
Version: 2:1.02.205-2
Depends: libc6 (>= 2.38), libdevmapper1.02.1 (>= 2:1.02.197)
Description: Linux Kernel Device Mapper userspace library
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but software raid,
 and other drivers that create "virtual" block devices.
 .
 This package contains a utility for modifying device mappings.
Homepage: https://sourceware.org/lvm2/

Package: dnsutils
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 24
Maintainer: Debian DNS Team <team+dns@tracker.debian.org>
Architecture: all
Source: bind9
Version: 1:9.18.49-1~deb12u2
Depends: bind9-dnsutils
Description: Transitional package for bind9-dnsutils
 This is a transitional package. It can safely be removed.
Homepage: https://www.isc.org/downloads/bind/

Package: docker-buildx-plugin
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 74106
Maintainer: Docker <support@docker.com>
Architecture: amd64
Version: 0.38.0-1~debian.12~bookworm
Replaces: docker-ce-cli
Enhances: docker-ce-cli
Description: Docker Buildx plugin extends build capabilities with BuildKit.
Homepage: https://github.com/docker/buildx

Package: docker-ce
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 113613
Maintainer: Docker <support@docker.com>
Architecture: amd64
Version: 5:29.9.1-1~debian.12~bookworm
Replaces: docker-ce-cli (<< 5:28.0.0)
Depends: containerd.io (>= 2.1.5), docker-ce-cli, iptables, nftables, libc6 (>= 2.34), libsystemd0
Pre-Depends: init-system-helpers (>= 1.54~)
Recommends: apparmor, ca-certificates, docker-ce-rootless-extras, git, pigz, procps, xz-utils
Suggests: cgroupfs-mount | cgroup-lite
Conflicts: docker.io
Conffiles:
 /etc/default/docker 01f06689327cb8ded58332709d28670c
 /etc/init.d/docker 4d456f2a4d37184f6ae185a400058582
Description: Docker: the open-source application container engine
 Docker is a product for you to build, ship and run any application as a
 lightweight container
 .
 Docker containers are both hardware-agnostic and platform-agnostic. This means
 they can run anywhere, from your laptop to the largest cloud compute instance
 and everything in between - and they don't require you to use a particular
 language, framework or packaging system. That makes them great building blocks
 for deploying and scaling web apps, databases, and backend services without
 depending on a particular stack or provider.
Homepage: https://www.docker.com

Package: docker-ce-cli
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 46553
Maintainer: Docker <support@docker.com>
Architecture: amd64
Source: docker-ce
Version: 5:29.9.1-1~debian.12~bookworm
Replaces: docker-ce (<< 5:0)
Depends: libc6 (>= 2.34)
Recommends: docker-buildx-plugin, docker-compose-plugin
Suggests: docker-model-plugin
Breaks: docker-ce (<< 5:0)
Conflicts: docker-cli, docker.io
Description: Docker CLI: the open-source application container engine
 Docker is a product for you to build, ship and run any application as a
 lightweight container
 .
 Docker containers are both hardware-agnostic and platform-agnostic. This means
 they can run anywhere, from your laptop to the largest cloud compute instance
 and everything in between - and they don't require you to use a particular
 language, framework or packaging system. That makes them great building blocks
 for deploying and scaling web apps, databases, and backend services without
 depending on a particular stack or provider.
Homepage: https://www.docker.com

Package: docker-ce-rootless-extras
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 25448
Maintainer: Docker <support@docker.com>
Architecture: amd64
Source: docker-ce
Version: 5:29.9.1-1~debian.12~bookworm
Replaces: rootlesskit
Depends: dbus-user-session, libc6 (>= 2.34)
Breaks: rootlesskit
Conflicts: rootlesskit
Enhances: docker-ce
Description: Rootless support for Docker.
 Use dockerd-rootless.sh to run the daemon.
 Use dockerd-rootless-setuptool.sh to setup systemd for dockerd-rootless.sh.
Homepage: https://docs.docker.com/go/rootless/

Package: docker-compose-plugin
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 31912
Maintainer: Docker <support@docker.com>
Architecture: amd64
Version: 5.6.0-1~debian.12~bookworm
Recommends: docker-buildx-plugin (>= 0.17.0)
Enhances: docker-ce-cli
Description: Docker Compose (V2) plugin for the Docker CLI.
 .
 This plugin provides the 'docker compose' subcommand.
 .
 The binary can also be run standalone as a direct replacement for
 Docker Compose V1 ('docker-compose').
Homepage: https://github.com/docker/compose

Package: dpkg
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 6587
Maintainer: Dpkg Developers <debian-dpkg@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.22.22
Depends: tar (>= 1.28-1)
Pre-Depends: libbz2-1.0, libc6 (>= 2.38), liblzma5 (>= 5.4.0), libmd0 (>= 0.0.0), libselinux1 (>= 3.1~), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4)
Suggests: apt, debsig-verify
Breaks: libapt-pkg5.0 (<< 1.7~b), lsb-base (<< 10.2019031300)
Conffiles:
 /etc/alternatives/README 7be88b21f7e386c8d5a8790c2461c92b
 /etc/cron.daily/dpkg 94bb6c1363245e46256908a5d52ba4fb
 /etc/dpkg/dpkg.cfg f4413ffb515f8f753624ae3bb365b81b
 /etc/logrotate.d/alternatives 5fe0af6ce1505fefdc158d9e5dbf6286
 /etc/logrotate.d/dpkg 9e25c8505966b5829785f34a548ae11f
Description: Debian package management system
 This package provides the low-level infrastructure for handling the
 installation and removal of Debian software packages.
 .
 For Debian package development tools, install dpkg-dev.
Homepage: https://wiki.debian.org/Teams/Dpkg

Package: dpkg-dev
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1725
Maintainer: Dpkg Developers <debian-dpkg@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: dpkg
Version: 1.22.22
Provides: dpkg-build-api (= 0), dpkg-build-api (= 1)
Depends: perl:any, libdpkg-perl (= 1.22.22), tar (>= 1.28-1), bzip2, xz-utils (>= 5.4.0), patch (>= 2.7), make, binutils
Recommends: build-essential, gcc | c-compiler, fakeroot, sq | sqop | rsop | gosop | pgpainless-cli | gpg-sq | gnupg, sqv | sqopv | rsopv | sopv | gosop | pgpainless-cli | gpgv-sq | gpgv, libalgorithm-merge-perl
Suggests: debian-keyring, debian-tag2upload-keyring
Breaks: debhelper (<< 10.10.1~), gosop (<< 1.1.0~), libsop-java-java (<< 4.0.7~), pgpainless-cli (<< 1.3.13~), rsop (<< 0.4.0~), sq (<< 0.40.0~), sqop (<< 0.27.2~), sqv (<< 1.3.0~)
Conffiles:
 /etc/dpkg/shlibs.default 1a2b9d0a869e2aa885ae3621c557fb95
 /etc/dpkg/shlibs.override 84b1e69080569cc5c613a50887af5200
Description: Debian package development tools
 This package provides the development tools (including dpkg-source)
 required to unpack, build and upload Debian source packages.
 .
 Most Debian source packages will require additional tools to build;
 for example, most packages need make and the C compiler gcc.
Homepage: https://wiki.debian.org/Teams/Dpkg

Package: dracut-install
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 100
Maintainer: Thomas Lange <lange@debian.org>
Architecture: amd64
Source: dracut
Version: 106-6
Replaces: dracut-core (<< 060+5-7~)
Depends: libc6 (>= 2.38), libkmod2 (>= 33~)
Breaks: dracut-core (<< 060+5-7~)
Description: dracut is an event driven initramfs infrastructure (dracut-install)
 This package just contains the dracut-install command to be used by
 initramfs generating tools.
Homepage: https://github.com/dracut-ng/dracut-ng/wiki

Package: e2fsprogs
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 1537
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: foreign
Source: e2fsprogs (1.47.2-3)
Version: 1.47.2-3+b12
Depends: logsave
Pre-Depends: libblkid1 (>= 2.36), libc6 (>= 2.38), libcom-err2 (>= 1.43.9), libext2fs2t64 (= 1.47.2-3+b12), libss2 (>= 1.38), libuuid1 (>= 2.16)
Recommends: e2fsprogs-l10n
Suggests: gpart, parted, fuse2fs, e2fsck-static, libarchive13t64
Conffiles:
 /etc/cron.d/e2scrub_all 244b6578e16a06d6fd61269241931284
 /etc/e2scrub.conf df38534cc670c70a91cf9b035845d244
 /etc/mke2fs.conf 6ce04fdb2ca015186862d66bcab35311
Description: ext2/ext3/ext4 file system utilities
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package contains programs for creating, checking, and maintaining
 ext2/3/4-based file systems.  It also includes the "badblocks" program,
 which can be used to scan for bad blocks on a disk or other storage device.
Homepage: http://e2fsprogs.sourceforge.net
Important: yes

Package: eject
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 158
Maintainer: Chris Hofstaedtler <zeha@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.41.5-0+deb13u1
Depends: libc6 (>= 2.38), libmount1 (= 2.41.5-0+deb13u1)
Description: ejects CDs and operates CD-Changers under Linux
 This program will eject CD-ROMs (assuming your drive supports the CDROMEJECT
 ioctl). It also allows setting the autoeject feature.
 .
 On supported ATAPI/IDE multi-disc CD-ROM changers, it allows changing
 the active disc.
 .
 You can also use eject to properly disconnect external mass-storage
 devices like digital cameras or portable music players.
Homepage: https://github.com/util-linux/util-linux

Package: ethtool
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 775
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Version: 1:6.14.2-1
Depends: libc6 (>= 2.34), libmnl0 (>= 1.0.3-4~)
Conffiles:
 /etc/network/if-pre-up.d/ethtool 09b4a447e5048a4ea0bc34732bd0278c
 /etc/network/if-up.d/ethtool a522a7b2b1d3e2d9a06e9690674a5d38
Description: display or change Ethernet device settings
 ethtool can be used to query and change settings such as speed, auto-
 negotiation and checksum offload on many network devices, especially
 Ethernet devices.
Homepage: https://www.kernel.org/pub/software/network/ethtool/

Package: exim4-base
Status: install ok installed
Priority: optional
Section: mail
Installed-Size: 1731
Maintainer: Exim4 Maintainers <pkg-exim4-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: exim4
Version: 4.98.2-1+deb13u5
Replaces: exim, exim-tls, exim4-daemon-custom, exim4-daemon-heavy, exim4-daemon-light
Depends: adduser, cron | cron-daemon | anacron | systemd-sysv, exim4-config (>= 4.94) | exim4-config-2, libfile-fcntllock-perl, netbase, debconf (>= 0.5) | debconf-2.0, perl:any, libc6 (>= 2.38), libdb5.3t64
Recommends: bsd-mailx | mailx, psmisc
Suggests: exim4-doc-html | exim4-doc-info, eximon4, file, gnutls-bin | openssl, mail-reader, spf-tools-perl, swaks
Breaks: exim4-daemon-custom (<< 4.98.2), exim4-daemon-heavy (<< 4.98.2), exim4-daemon-light (<< 4.98.2)
Conflicts: exim, exim-tls
Conffiles:
 /etc/cron.daily/exim4-base 0a2e69b6b6cb71430ba4beb14dc7f589
 /etc/init.d/exim4 4dccb6bed35fbf4c276f98637b21bebb
 /etc/logrotate.d/exim4-base 4d781cffa032e64fb3c5653335609ae4
 /etc/logrotate.d/exim4-paniclog d48b0301871643773ad3c2a63984241b
Description: support files for all Exim MTA (v4) packages
 Exim (v4) is a mail transport agent. exim4-base provides the support
 files needed by all exim4 daemon packages. You need an additional package
 containing the main executable. The available packages are:
 .
  exim4-daemon-light
  exim4-daemon-heavy
 .
 If you build exim4 from the source package locally, you can also
 build an exim4-daemon-custom package tailored to your own feature set.
 .
 The Debian exim4 packages have their own web page,
 http://wiki.debian.org/PkgExim4. There is also a Debian-specific
 FAQ list. Information about the way the Debian packages are
 configured can be found in
 /usr/share/doc/exim4-base/README.Debian.gz, which additionally contains
 information about the way the Debian binary packages are built. The
 very extensive upstream documentation is shipped in
 /usr/share/doc/exim4-base/spec.txt.gz. To repeat the debconf-driven
 configuration process in a standard setup, invoke dpkg-reconfigure
 exim4-config. There is a Debian-centered mailing list,
 pkg-exim4-users@lists.alioth.debian.org. Please ask Debian-specific
 questions there, and only write to the upstream exim-users mailing
 list if you are sure that your question is not Debian-specific. You
 can find the subscription web page on
 http://lists.alioth.debian.org/mailman/listinfo/pkg-exim4-users
Homepage: https://www.exim.org/

Package: exim4-config
Status: install ok installed
Priority: optional
Section: mail
Installed-Size: 908
Maintainer: Exim4 Maintainers <pkg-exim4-maintainers@lists.alioth.debian.org>
Architecture: all
Source: exim4
Version: 4.98.2-1+deb13u5
Provides: exim4-config-2
Depends: adduser, debconf (>= 0.5) | debconf-2.0
Recommends: ca-certificates
Breaks: exim4-daemon-heavy (<< 4.94), exim4-daemon-light (<< 4.94)
Conflicts: citadel-server, courier-mta, dma, esmtp-run, exim, exim-tls, exim4-config, exim4-config-2, hula-mta, masqmail, msmtp-mta, mta-dummy, nullmailer, opensmtpd, postfix, qmail-run, sendmail-bin, smail, ssmtp, xmail, zmailer
Conffiles:
 /etc/email-addresses 6bea09fbb18e4676012105fa5fc726c6
 /etc/exim4/conf.d/acl/00_exim4-config_header e572a7b9954b20950242db2a92b35044
 /etc/exim4/conf.d/acl/20_exim4-config_local_deny_exceptions 516070107501d48a3106d755cb199e95
 /etc/exim4/conf.d/acl/30_exim4-config_check_mail bbe4979288d9cd20868d13ca01e6bfc3
 /etc/exim4/conf.d/acl/30_exim4-config_check_rcpt d75f6a32ddb7c1d7e5926d8f52378309
 /etc/exim4/conf.d/acl/40_exim4-config_check_data ef4e89a4da7150ed05ee350b388d7dc9
 /etc/exim4/conf.d/auth/00_exim4-config_header d0ee6ea0b33d9796573bb024ffca20d4
 /etc/exim4/conf.d/auth/30_exim4-config_examples 2f4818cf17d41d2d5e08e5f1d978792e
 /etc/exim4/conf.d/main/01_exim4-config_listmacrosdefs b883950ef2581f980d43bea65426870b
 /etc/exim4/conf.d/main/02_exim4-config_options a46cef268a1981a735df77d1f3b4d782
 /etc/exim4/conf.d/main/03_exim4-config_tlsoptions aa191d3c37c9fc8ae79438e6622b7310
 /etc/exim4/conf.d/main/90_exim4-config_log_selector 888348df8f7bd25a0a77d3c05e8fffe3
 /etc/exim4/conf.d/retry/00_exim4-config_header 309f5bf0859ad91e03c5402d6afe6895
 /etc/exim4/conf.d/retry/30_exim4-config 1ec62a67290abfba32e536ecbf4346e7
 /etc/exim4/conf.d/rewrite/00_exim4-config_header d98361da23f34490d191bf2280728dec
 /etc/exim4/conf.d/rewrite/31_exim4-config_rewriting a293d4c1007ffc86ff1124c84c998f01
 /etc/exim4/conf.d/router/00_exim4-config_header c0ecc395e9a49487b484126cac4d9559
 /etc/exim4/conf.d/router/100_exim4-config_domain_literal d0184d959778b1bb20155912b583d362
 /etc/exim4/conf.d/router/150_exim4-config_hubbed_hosts 1d4a3bab1738f10f931b73ad60c7bb8d
 /etc/exim4/conf.d/router/200_exim4-config_primary 9a81bb494ab18397b54341e6d9d66ea8
 /etc/exim4/conf.d/router/300_exim4-config_real_local 07c6277988b181918f790ffe68c245da
 /etc/exim4/conf.d/router/400_exim4-config_system_aliases 7dc0cee575163f1d9761f1cf317f8299
 /etc/exim4/conf.d/router/500_exim4-config_hubuser bbc413dcaa4a7fc3cb5c75d3591fac27
 /etc/exim4/conf.d/router/600_exim4-config_userforward a70d7456ced9cfa42b05dd460bf269d7
 /etc/exim4/conf.d/router/700_exim4-config_procmail e89eb01b13b2acf673fbbb2c2dfa5999
 /etc/exim4/conf.d/router/800_exim4-config_maildrop e38b464ff80a81c2edfd44b68e79a6ed
 /etc/exim4/conf.d/router/850_exim4-config_lowuid 99478279a2d9b0c3681ff8ebd4dac48b
 /etc/exim4/conf.d/router/900_exim4-config_local_user 20c8ced8346125170242584e575a95ff
 /etc/exim4/conf.d/router/mmm_mail4root 8a16022dfc39cae4f508dfab20a8f760
 /etc/exim4/conf.d/transport/00_exim4-config_header 9568ac286553a79b8447c9060fed7798
 /etc/exim4/conf.d/transport/10_exim4-config_transport-macros 82bdd46b7bfecb990fb10e49415f5af3
 /etc/exim4/conf.d/transport/30_exim4-config_address_file fe97ddf4165820356e90c05fa744f796
 /etc/exim4/conf.d/transport/30_exim4-config_address_pipe dfcd9d71f1bb4c55ac29cccead29117e
 /etc/exim4/conf.d/transport/30_exim4-config_address_reply 9145131105953b0125a228ab9b7c6500
 /etc/exim4/conf.d/transport/30_exim4-config_mail_spool 1eafbf68af18442a08ef3d955b7b172f
 /etc/exim4/conf.d/transport/30_exim4-config_maildir_home 3edfd11b8e9a8919a9a14cbc24637d68
 /etc/exim4/conf.d/transport/30_exim4-config_maildrop_pipe c9f289c2504ed26493f3050190b44ad7
 /etc/exim4/conf.d/transport/30_exim4-config_procmail_pipe 82379d31ca4bf60d9667f408cb55dbbf
 /etc/exim4/conf.d/transport/30_exim4-config_remote_smtp 20cf395bd41d4282a57f552ade770531
 /etc/exim4/conf.d/transport/30_exim4-config_remote_smtp_smarthost d0b6f6f30aadc68e3cfbaefa79166516
 /etc/exim4/conf.d/transport/35_exim4-config_address_directory c2a777e8db8fac4f83c2da0c95952598
 /etc/exim4/exim4.conf.template c525fc300eb68ae537480a6f26b6364b
 /etc/exim4/passwd.client 4b0013712a87d147c8303fa761e3c771
 /etc/ppp/ip-up.d/exim4 3bdeb981ac0242a967a5400d022d25ff
Description: configuration for the Exim MTA (v4)
 Exim (v4) is a mail transport agent. exim4-config provides the configuration
 for the exim4 daemon packages. The configuration framework has been split
 off the main package to allow sites to replace the configuration scheme
 with their own without having to change the actual exim4 packages.
 .
 Sites with special configuration needs (having a lot of identically
 configured machines for example) can use this to distribute their own
 custom configuration via the packaging system, using the magic
 available with dpkg's conffile handling, without having to do local
 changes on all of these machines.
 .
 The Debian exim4 packages have their own web page,
 http://wiki.debian.org/PkgExim4. There is also a Debian-specific
 FAQ list. Information about the way the Debian packages are
 configured can be found in
 /usr/share/doc/exim4-base/README.Debian.gz, which additionally contains
 information about the way the Debian binary packages are built. The
 very extensive upstream documentation is shipped in
 /usr/share/doc/exim4-base/spec.txt.gz. To repeat the debconf-driven
 configuration process in a standard setup, invoke dpkg-reconfigure
 exim4-config. There is a Debian-centered mailing list,
 pkg-exim4-users@lists.alioth.debian.org. Please ask Debian-specific
 questions there, and only write to the upstream exim-users mailing
 list if you are sure that your question is not Debian-specific. You
 can find the subscription web page on
 http://lists.alioth.debian.org/mailman/listinfo/pkg-exim4-users
Homepage: https://www.exim.org/

Package: exim4-daemon-light
Status: install ok installed
Priority: optional
Section: mail
Installed-Size: 1614
Maintainer: Exim4 Maintainers <pkg-exim4-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: exim4
Version: 4.98.2-1+deb13u5
Replaces: exim4-base (<= 4.61-1), mail-transport-agent
Provides: default-mta, exim4-localscanapi-6.0, mail-transport-agent
Depends: exim4-base (>= 4.98.2), debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.38), libcrypt1 (>= 1:4.1.0), libdb5.3t64, libgnutls-dane0t64 (>= 3.7.0), libgnutls30t64 (>= 3.8.6), libidn12 (>= 1.13), libidn2-0 (>= 0.6), libnsl2 (>= 1.0), libpcre2-8-0 (>= 10.22)
Conflicts: mail-transport-agent
Description: lightweight Exim MTA (v4) daemon
 Exim (v4) is a mail transport agent. This package contains the exim4
 daemon with only basic features enabled. It works well with the
 standard setups that are provided by Debian and includes support for
 TLS encryption and the dlopen patch to allow dynamic loading of a
 local_scan function.
 .
 The Debian exim4 packages have their own web page,
 http://wiki.debian.org/PkgExim4. There is also a Debian-specific
 FAQ list. Information about the way the Debian packages are
 configured can be found in
 /usr/share/doc/exim4-base/README.Debian.gz, which additionally contains
 information about the way the Debian binary packages are built. The
 very extensive upstream documentation is shipped in
 /usr/share/doc/exim4-base/spec.txt.gz. To repeat the debconf-driven
 configuration process in a standard setup, invoke dpkg-reconfigure
 exim4-config. There is a Debian-centered mailing list,
 pkg-exim4-users@lists.alioth.debian.org. Please ask Debian-specific
 questions there, and only write to the upstream exim-users mailing
 list if you are sure that your question is not Debian-specific. You
 can find the subscription web page on
 http://lists.alioth.debian.org/mailman/listinfo/pkg-exim4-users
Homepage: https://www.exim.org/

Package: fakeroot
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 225
Maintainer: Clint Adams <clint@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.37.1.1-1
Depends: libfakeroot (>= 1.37.1.1-1), libc6 (>= 2.38)
Description: tool for simulating superuser privileges
 fakeroot provides a fake "root environment" by means of LD_PRELOAD and
 SysV IPC (or TCP) trickery. It puts wrappers around getuid(), chown(),
 stat(), and other file-manipulation functions, so that unprivileged
 users can (for instance) populate .deb archives with root-owned files;
 various build tools use fakeroot for this by default.
 .
 This package contains fakeroot command and the daemon that remembers
 fake ownership/permissions of files manipulated by fakeroot
 processes.

Package: fdisk
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 529
Maintainer: Chris Hofstaedtler <zeha@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.41.5-0+deb13u1
Depends: libc6 (>= 2.38), libfdisk1 (= 2.41.5-0+deb13u1), libmount1 (= 2.41.5-0+deb13u1), libncursesw6 (>= 6), libreadline8t64 (>= 6.0), libsmartcols1 (= 2.41.5-0+deb13u1), libtinfo6 (>= 6)
Recommends: sensible-utils
Description: collection of partitioning utilities
 This package contains the classic fdisk, sfdisk and cfdisk partitioning
 utilities from the util-linux suite.
 .
 The utilities included in this package allow you to partition
 your hard disk. The utilities supports both modern and legacy
 partition tables (eg. GPT, MBR, etc).
 .
 The fdisk utility is the classical text-mode utility.
 The cfdisk utility gives a more userfriendly curses based interface.
 The sfdisk utility is mostly for automation and scripting uses.
Homepage: https://github.com/util-linux/util-linux

Package: ffmpeg
Status: install ok installed
Priority: optional
Section: video
Installed-Size: 2680
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 7:7.1.5-0+deb13u1
Depends: libavcodec61 (>= 7:7.1.5), libavdevice61 (>= 7:7.1.5), libavfilter10 (>= 7:7.1.5), libavformat61 (>= 7:7.1.5), libavutil59 (>= 7:7.1.5), libc6 (>= 2.35), libplacebo349 (>= 7.349.0), libpostproc58 (>= 7:7.1.5), libsdl2-2.0-0 (>= 2.0.12), libswresample5 (>= 7:7.1.5), libswscale8 (>= 7:7.1.5)
Suggests: ffmpeg-doc
Description: Tools for transcoding, streaming and playing of multimedia files
 FFmpeg is the leading multimedia framework, able to decode, encode, transcode,
 mux, demux, stream, filter and play pretty much anything that humans and
 machines have created. It supports the most obscure ancient formats up to the
 cutting edge.
 .
 This package contains:
  * ffmpeg: a command line tool to convert multimedia files between formats
  * ffplay: a simple media player based on SDL and the FFmpeg libraries
  * ffprobe: a simple multimedia stream analyzer
  * qt-faststart: a utility to rearrange Quicktime files
Homepage: https://ffmpeg.org/

Package: file
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 79
Maintainer: Christoph Biedl <debian.axhn@manchmal.in-ulm.de>
Architecture: amd64
Multi-Arch: foreign
Version: 1:5.46-5
Depends: libc6 (>= 2.38), libmagic1t64 (= 1:5.46-5)
Breaks: debhelper (<< 12.2~)
Description: Recognize the type of data in a file using "magic" numbers
 The file command is "a file type guesser", a command-line tool that
 tells you in words what kind of data a file contains.
 .
 This package contains the file program itself.
Homepage: https://www.darwinsys.com/file/

Package: findutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 2160
Maintainer: Andreas Metzler <ametzler@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 4.10.0-3
Pre-Depends: libc6 (>= 2.38), libselinux1 (>= 3.1~)
Breaks: binstats (<< 1.08-8.1), guilt (<< 0.36-0.2), libpython3.4-minimal (<< 3.4.4-2), libpython3.5-minimal (<< 3.5.1-3), lsat (<< 0.9.7.1-2.1), mc (<< 3:4.8.11-1), switchconf (<< 0.0.9-2.1)
Description: utilities for finding files--find, xargs
 GNU findutils provides utilities to find files meeting specified
 criteria and perform various actions on the files which are found.
 This package contains 'find' and 'xargs'; however, 'locate' has
 been split off into a separate package.
Homepage: https://savannah.gnu.org/projects/findutils/

Package: firewalld
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 2467
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 2.3.1-1+deb13u1
Depends: default-dbus-system-bus | dbus-system-bus, gir1.2-glib-2.0, gir1.2-nm-1.0, polkitd, python3-dbus, python3-gi, python3-nftables (>= 0.9.3-2~), python3-firewall (= 2.3.1-1+deb13u1), python3:any
Recommends: ipset, iptables, python3-cap-ng
Conffiles:
 /etc/firewalld/firewalld.conf aaf5e916ab5da85d1b8edd7b40164b1c
 /etc/logrotate.d/firewalld 1807a9d374ef509073a3b3552f8c29ea
Description: dynamically managed firewall with support for network zones
 firewalld is a dynamically managed firewall daemon with support for
 network/firewall zones to define the trust level of network connections
 or interfaces. It has support for IPv4, IPv6 firewall settings and for
 ethernet bridges and has a separation of runtime and persistent
 configuration options.
 It also provides a D-Bus interface for services or applications to add
 and apply firewall rules on-the-fly.
Homepage: https://www.firewalld.org/

Package: firmware-ath9k-htc
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 153
Maintainer: John Scott <jscott@posteo.net>
Architecture: all
Multi-Arch: foreign
Source: open-ath9k-htc-firmware
Version: 1.4.0-110-ge888634+dfsg1-0.1
Replaces: firmware-atheros (<= 20230210-1)
Breaks: firmware-atheros (<= 20230210-1)
Description: firmware for AR7010 and AR9271 USB wireless adapters
 The Qualcomm Atheros AR7010 and AR9271 chipsets are used in USB
 wireless adapters which are 802.11n-capable. This package contains
 the free firmware they require to function, and which gets loaded
 onto the devices during use.
Homepage: https://github.com/qca/open-ath9k-htc-firmware

Package: firmware-carl9170
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 44
Maintainer: John Scott <jscott@posteo.net>
Architecture: all
Source: carl9170fw
Version: 1.9.9-450-gad1c721+dfsg-0.1
Conflicts: firmware-linux-free (<< 20200122-5)
Description: firmware for AR9170 USB wireless adapters
 This is the carl9170 firmware for Qualcomm Atheros AR9170
 802.11n USB wireless adapters. This gets loaded onto the
 device during use, and is intended to be used in conjunction
 with the carl9170 driver.
Built-Using: gcc-13 (= 13.3.0-8), newlib (= 4.4.0.20231231-4)
Homepage: https://wireless.wiki.kernel.org/en/users/Drivers/carl9170

Package: firmware-linux-free
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 96
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: firmware-free
Version: 20241210-2
Recommends: firmware-carl9170, firmware-ath9k-htc
Suggests: initramfs-tools
Description: Binary firmware for various drivers in the Linux kernel
 This package provides firmware which was previously included in the Linux
 kernel and which is compliant with the Debian Free Software Guidelines.
Homepage: https://gitlab.com/kernel-firmware/linux-firmware

Package: fontconfig
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 681
Maintainer: Debian freedesktop.org maintainers <pkg-freedesktop-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.15.0-2.3
Depends: libc6 (>= 2.38), libfontconfig1 (>= 2.13.0), libfreetype6 (>= 2.2.1), fontconfig-config
Description: generic font configuration library - support binaries
 Fontconfig is a font configuration and customization library, which
 does not depend on the X Window System. It is designed to locate
 fonts within the system and select them according to requirements
 specified by applications.
 .
 Fontconfig is not a rasterization library, nor does it impose a
 particular rasterization library on the application. The X-specific
 library 'Xft' uses fontconfig along with freetype to specify and
 rasterize fonts.
 .
 This package contains a program to maintain the fontconfig cache
 (fc-cache), a sample program to list installed fonts (fc-list), a program
 to test the matching rules (fc-match) and a program to dump the binary
 cache files in string form (fc-cat). It no longer makes fonts managed by defoma
 available to fontconfig applications.
Homepage: https://www.freedesktop.org/wiki/Software/fontconfig/

Package: fontconfig-config
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 533
Maintainer: Debian freedesktop.org maintainers <pkg-freedesktop-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: fontconfig
Version: 2.15.0-2.3
Depends: debconf (>= 0.5) | debconf-2.0, fonts-dejavu-core | fonts-liberation | fonts-croscore | fonts-freefont-otf | fonts-freefont-ttf | fonts-urw-base35 | fonts-texgyre | fonts-noto-core
Breaks: libfontconfig1 (<< 2.13.0)
Conffiles:
 /etc/fonts/conf.d/README ad6182d0b838d9d8f39219a37b88b24d
 /etc/fonts/fonts.conf 9632eb1c8b4d81e0e300cd733a4beefe
Description: generic font configuration library - configuration
 Fontconfig is a font configuration and customization library, which
 does not depend on the X Window System. It is designed to locate
 fonts within the system and select them according to requirements
 specified by applications.
 .
 This package contains the configuration files and scripts for fontconfig.
Homepage: https://www.freedesktop.org/wiki/Software/fontconfig/

Package: fonts-dejavu
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 35
Maintainer: Debian Fonts Task Force <debian-fonts@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2.37-8
Depends: fonts-dejavu-core, fonts-dejavu-mono, fonts-dejavu-extra
Description: metapackage to pull in fonts-dejavu-core, -mono and -extra
 DejaVu provides an expanded version of the Vera font family aiming for
 quality and broader Unicode coverage while retaining the original Vera
 style. DejaVu currently works towards conformance with the Multilingual
 European Standards (MES-1 and MES-2) for Unicode coverage. The DejaVu
 fonts provide serif, sans and monospaced variants.
 .
 Use this package if you want all DejaVu variants.
 .
 DejaVu fonts are intended for use on low-resolution devices (mainly
 computer screens) but can be used in printing as well.
Homepage: https://dejavu-fonts.github.io/

Package: fonts-dejavu-core
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 2292
Maintainer: Debian Fonts Task Force <debian-fonts@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: fonts-dejavu
Version: 2.37-8
Depends: fonts-dejavu-mono
Conffiles:
 /etc/fonts/conf.avail/20-unhint-small-dejavu-lgc-sans.conf 6488b24401e477e35aa71237054c8ada
 /etc/fonts/conf.avail/20-unhint-small-dejavu-lgc-serif.conf 0b01522fe76b4e5b8ab3d12383371348
 /etc/fonts/conf.avail/20-unhint-small-dejavu-sans.conf f7df7bba810dd953dd78212900f4dcad
 /etc/fonts/conf.avail/20-unhint-small-dejavu-serif.conf e90c678d46f49bb9d6ba469b64e80c0c
 /etc/fonts/conf.avail/57-dejavu-sans.conf 2156c2353cfcc81f33150cf889193c28
 /etc/fonts/conf.avail/57-dejavu-serif.conf 2604487cb2eee1bdb7010ea716faf408
 /etc/fonts/conf.avail/58-dejavu-lgc-sans.conf b4a8f51e45aa24fdee47b3f838cc0205
 /etc/fonts/conf.avail/58-dejavu-lgc-serif.conf 5f0b00e681b1f40b65dd336696ee0bbb
Description: Vera font family derivate with additional characters
 DejaVu provides an expanded version of the Vera font family aiming for
 quality and broader Unicode coverage while retaining the original Vera
 style. DejaVu currently works towards conformance with the Multilingual
 European Standards (MES-1 and MES-2) for Unicode coverage. The DejaVu
 fonts provide serif, sans and monospaced variants.
 .
 This package only contains the sans, sans-bold, serif and serif-bold
 variants. For additional variants, see the fonts-dejavu-mono and
 fonts-dejavu-extra packages.
 .
 DejaVu fonts are intended for use on low-resolution devices (mainly
 computer screens) but can be used in printing as well.
Homepage: https://dejavu-fonts.github.io/

Package: fonts-dejavu-extra
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 6733
Maintainer: Debian Fonts Task Force <debian-fonts@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: fonts-dejavu
Version: 2.37-8
Depends: fonts-dejavu-core
Description: Vera font family derivate with additional characters (extra variants)
 DejaVu provides an expanded version of the Vera font family aiming for
 quality and broader Unicode coverage while retaining the original Vera
 style. DejaVu currently works towards conformance with the Multilingual
 European Standards (MES-1 and MES-2) for Unicode coverage. The DejaVu
 fonts provide serif, sans and monospaced variants.
 .
 This package includes additional variants, such as oblique, italic,
 bold-oblique, bold-italic and the condensed forms.
 .
 DejaVu fonts are intended for use on low-resolution devices (mainly
 computer screens) but can be used in printing as well.
Homepage: https://dejavu-fonts.github.io/

Package: fonts-dejavu-mono
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 1281
Maintainer: Debian Fonts Task Force <debian-fonts@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: fonts-dejavu
Version: 2.37-8
Replaces: fonts-dejavu-core (<< 2.37-7~), fonts-dejavu-extra (<< 2.37-7~)
Breaks: fonts-dejavu-core (<< 2.37-7~), fonts-dejavu-extra (<< 2.37-7~)
Conffiles:
 /etc/fonts/conf.avail/20-unhint-small-dejavu-lgc-sans-mono.conf 10d6f2176d76ee9b89a19a17811257f2
 /etc/fonts/conf.avail/20-unhint-small-dejavu-sans-mono.conf 0cbf30e4580c5a8570da071ab12c5e4d
 /etc/fonts/conf.avail/57-dejavu-sans-mono.conf b9a76edd2aeb35cd1095e378963e2cdd
 /etc/fonts/conf.avail/58-dejavu-lgc-sans-mono.conf d2ee39274982cb4f831783cff742c8bc
Description: Vera font family derivate with additional characters
 DejaVu provides an expanded version of the Vera font family aiming for
 quality and broader Unicode coverage while retaining the original Vera
 style. DejaVu currently works towards conformance with the Multilingual
 European Standards (MES-1 and MES-2) for Unicode coverage. The DejaVu
 fonts provide serif, sans and monospaced variants.
 .
 This package only contains the monospaced variants. For additional
 variants, see the fonts-dejavu-core and fonts-dejavu-extra packages.
 .
 DejaVu fonts are intended for use on low-resolution devices (mainly
 computer screens) but can be used in printing as well.
Homepage: https://dejavu-fonts.github.io/

Package: fonts-droid-fallback
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 7339
Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: fonts-android
Version: 1:8.1.0r7-1~1.gbp36536b
Replaces: fonts-droid (<< 1:6.0.0r26-1~)
Recommends: fonts-noto-mono
Suggests: fonts-noto
Breaks: fonts-droid (<< 1:6.0.0r26-1~)
Conffiles:
 /etc/fonts/conf.avail/65-droid-sans-fallback.conf b53978fe17be3c725aa002da2496257c
Description: handheld device font with extensive style and language support (fallback)
 This package provides DroidSans Fallback variants, Fallback and
 FallbackFull.
 .
 Each contains extensive character set coverage including
 Western Europe, Eastern/Central Europe, Baltic, Cyrillic, Greek and
 Turkish support. The Droid Sans regular font also includes support for
 Arabic, Simplified and Traditional Chinese, Hebrew, Japanese, Korean and
 Thai.
 .
 Droid was designed by Ascender's Steve Matteson and hinted to provide
 optimal quality for screen text.
 .
 Please note that fonts-noto grew out of fonts-droid and is the same but
 better.  You need fonts-droid-fallback (former fonts-droid) in case you
 need to deal with some legacy documents.
Homepage: https://android.googlesource.com/platform/frameworks/base/

Package: fonts-liberation
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 4287
Maintainer: Debian Fonts Task Force <debian-fonts@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1:2.1.5-3
Replaces: fonts-liberation2 (<< 1:2.1.5-2~)
Recommends: fonts-liberation-sans-narrow
Breaks: fonts-liberation2 (<< 1:2.1.5-2~)
Description: fonts with the same metrics as Times, Arial and Courier
 The Liberation font family is a set of serif, sans-serif and
 monospaced fonts with exactly the same metrics as the non-free
 Microsoft fonts Times New Roman, Arial and Courier New.
Homepage: https://github.com/liberationfonts

Package: fonts-liberation-sans-narrow
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 498
Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1:1.07.6-4
Replaces: fonts-liberation (<< 1:1.07.6-1~)
Breaks: fonts-liberation (<< 1:1.07.6-1~)
Enhances: fonts-liberation
Description: Sans-serif Narrow fonts to replace commonly used Arial Narrow
 The Liberation Sans Narrow Fonts are intended to be replacements for
 the Arial Narrow.
Homepage: https://github.com/liberationfonts/liberation-sans-narrow

Package: fonts-liberation2
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 15
Maintainer: Debian Fonts Task Force <debian-fonts@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: fonts-liberation
Version: 1:2.1.5-3
Depends: fonts-liberation (>= 1:2.1.5-2~)
Description: transitional dummy package
 This package is a dummy package. It can be safely removed.
Homepage: https://github.com/liberationfonts

Package: fonts-noto
Status: install ok installed
Priority: optional
Section: metapackages
Installed-Size: 31
Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 20201225-2
Depends: fonts-noto-core
Recommends: fonts-noto-cjk, fonts-noto-cjk-extra, fonts-noto-color-emoji, fonts-noto-extra, fonts-noto-mono, fonts-noto-ui-core, fonts-noto-ui-extra, fonts-noto-unhinted
Description: metapackage to pull in all Noto fonts
 Noto is a collection of font families,
 each visually harmonized across scripts.
 .
 Use this package if you want all Noto fonts.
 .
 The name "Noto" is short for "No Tofu",
 describing the aim of covering all living Unicode scripts
 (currently 65 are covered, at least partly.
 .
 Tofu (豆腐) is Japanese jargon
 for unicode replacement character "�" (U+FFFD)
 often displayed as replacement for unassigned or unknown characters.
Homepage: https://www.google.com/get/noto/

Package: fonts-noto-cjk
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 91217
Maintainer: Debian Fonts Team <debian-fonts@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1:20240730+repack1-1
Suggests: fonts-noto-cjk-extra
Description: "No Tofu" font families with large Unicode coverage (CJK regular and bold)
 Noto is a collection of font families, each visually harmonized across
 scripts.
 .
 This package contains Noto font families for Traditional Chinese,
 Simplified Chinese, Japanese and Korean:
 .
  * Noto Sans CJK JP
  * Noto Sans CJK KR
  * Noto Sans CJK SC
  * Noto Sans CJK TC
  * Noto Sans Mono CJK JP
  * Noto Sans Mono CJK KR
  * Noto Sans Mono CJK SC
  * Noto Sans Mono CJK TC
  * Noto Serif CJK JP
  * Noto Serif CJK KR
  * Noto Serif CJK SC
  * Noto Serif CJK TC
 .
 These fonts are derived from the font family Source Han Sans.
 .
 The name "Noto" is short for "No Tofu", describing the aim of covering
 all living Unicode scripts.
 .
 Tofu (豆腐) is Japanese jargon for unicode replacement character "�"
 (U+FFFD) often displayed as replacement for unassigned or unknown
 characters.
 .
 This package contains regular and bold fonts.
Homepage: https://github.com/notofonts/noto-cjk

Package: fonts-noto-cjk-extra
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 214826
Maintainer: Debian Fonts Team <debian-fonts@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: fonts-noto-cjk
Version: 1:20240730+repack1-1
Replaces: fonts-noto-cjk (<< 1:1.004+repack3-2~)
Depends: fonts-noto-cjk
Breaks: fonts-noto-cjk (<< 1:1.004+repack3-2~)
Description: "No Tofu" font families with large Unicode coverage (CJK all weight)
 Noto is a collection of font families, each visually harmonized across
 scripts.
 .
 This package contains Noto font families for Traditional Chinese,
 Simplified Chinese, Japanese and Korean:
 .
  * Noto Sans CJK JP
  * Noto Sans CJK KR
  * Noto Sans CJK SC
  * Noto Sans CJK TC
  * Noto Sans Mono CJK JP
  * Noto Sans Mono CJK KR
  * Noto Sans Mono CJK SC
  * Noto Sans Mono CJK TC
  * Noto Serif CJK JP
  * Noto Serif CJK KR
  * Noto Serif CJK SC
  * Noto Serif CJK TC
 .
 These fonts are derived from the font family Source Han Sans.
 .
 The name "Noto" is short for "No Tofu", describing the aim of covering
 all living Unicode scripts.
 .
 Tofu (豆腐) is Japanese jargon for unicode replacement character "�"
 (U+FFFD) often displayed as replacement for unassigned or unknown
 characters.
 .
 This package contains all weight fonts.
Homepage: https://github.com/notofonts/noto-cjk

Package: fonts-noto-color-emoji
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 11013
Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2.051-0+deb13u1
Description: color emoji font from Google
 Noto is a collection of font families, each visually harmonized across
 scripts.
 .
 The name "Noto" is short for "No Tofu", describing the aim of covering
 all living Unicode scripts.
 .
 Tofu (豆腐) is Japanese jargon for unicode replacement character "�"
 (U+FFFD) often displayed as replacement for unassigned or unknown
 characters.
 .
 This package contains the color emoji font used on "stock" Android devices
 such as the Google Pixel.
Homepage: https://fonts.google.com/noto/specimen/Noto+Color+Emoji

Package: fonts-noto-core
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 42551
Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: fonts-noto
Version: 20201225-2
Replaces: fonts-noto (<< 2015-05-11+cjk-1~), fonts-noto-hinted (<< 20181130-2~), fonts-noto-unhinted (<< 20201027-1~)
Depends: fonts-noto-mono
Breaks: fonts-noto (<< 2015-05-11+cjk-1~), fonts-noto-hinted (<< 20181130-2~), fonts-noto-unhinted (<< 20201027-1~)
Conffiles:
 /etc/fonts/conf.avail/30-droid-noto.conf a34074694dce0a5ccc5844ec0a1315ea
Description: "No Tofu" font families with large Unicode coverage (core)
 Noto is a collection of font families,
 each visually harmonized across scripts.
 .
 This package contains core weights for these Noto font families:
 .
  * Noto Kufi Arabic
  * Noto Looped Lao Bold
  * Noto Looped Lao Regular
  * Noto Looped Thai Bold
  * Noto Looped Thai Regular
  * Noto Music
  * Noto Naskh Arabic
  * Noto Nastaliq Urdu
  * Noto Rashi Hebrew
  * Noto Sans
  * Noto Sans Adlam
  * Noto Sans Adlam Unjoined
  * Noto Sans AnatoHiero
  * Noto Sans Arabic
  * Noto Sans Armenian
  * Noto Sans Avestan
  * Noto Sans Balinese
  * Noto Sans Bamum
  * Noto Sans Bassa Vah
  * Noto Sans Batak
  * Noto Sans Bengali
  * Noto Sans Bhaiksuki
  * Noto Sans Brahmi
  * Noto Sans Buginese
  * Noto Sans Buhid
  * Noto Sans CanAborig
  * Noto Sans Carian
  * Noto Sans CaucAlban
  * Noto Sans Chakma
  * Noto Sans Cham
  * Noto Sans Cherokee
  * Noto Sans Coptic
  * Noto Sans Cuneiform
  * Noto Sans Cypriot
  * Noto Sans Deseret
  * Noto Sans Devanagari
  * Noto Sans Display
  * Noto Sans Duployan
  * Noto Sans EgyptHiero
  * Noto Sans Elbasan
  * Noto Sans Elymaic
  * Noto Sans Ethiopic
  * Noto Sans Georgian
  * Noto Sans Glagolitic
  * Noto Sans Gothic
  * Noto Sans Grantha
  * Noto Sans Gujarati
  * Noto Sans Gunjala Gondi
  * Noto Sans Gurmukhi
  * Noto Sans Hanifi Rohingya
  * Noto Sans Hanunoo
  * Noto Sans Hatran
  * Noto Sans Hebrew
  * Noto Sans ImpAramaic
  * Noto Sans Indic Siyaq Numbers
  * Noto Sans InsPahlavi
  * Noto Sans InsParthi
  * Noto Sans Javanese
  * Noto Sans Kaithi
  * Noto Sans Kannada
  * Noto Sans Kayah Li
  * Noto Sans Kharoshthi
  * Noto Sans Khmer
  * Noto Sans Khojki
  * Noto Sans Khudawadi
  * Noto Sans Lao
  * Noto Sans Lepcha
  * Noto Sans Limbu
  * Noto Sans Linear A
  * Noto Sans Linear B
  * Noto Sans Lisu
  * Noto Sans Lycian
  * Noto Sans Lydian
  * Noto Sans Mahajani
  * Noto Sans Malayalam
  * Noto Sans Mandaic
  * Noto Sans Manichaean
  * Noto Sans Marchen
  * Noto Sans Masaram Gondi
  * Noto Sans Math
  * Noto Sans Mayan Numerals
  * Noto Sans Medefaidrin
  * Noto Sans MeeteiMayek
  * Noto Sans Mende Kikakui
  * Noto Sans Meroitic
  * Noto Sans Miao
  * Noto Sans Modi
  * Noto Sans Mongolian
  * Noto Sans Mro
  * Noto Sans Multani
  * Noto Sans Myanmar
  * Noto Sans NKo
  * Noto Sans Nabataean
  * Noto Sans NewTaiLue
  * Noto Sans Newa
  * Noto Sans Nushu
  * Noto Sans Ogham
  * Noto Sans Ol Chiki
  * Noto Sans Old Italic
  * Noto Sans Old Permic
  * Noto Sans Old Turkic
  * Noto Sans OldHung
  * Noto Sans OldNorArab
  * Noto Sans OldPersian
  * Noto Sans OldSogdian
  * Noto Sans OldSouArab
  * Noto Sans Oriya
  * Noto Sans Osage
  * Noto Sans Osmanya
  * Noto Sans Pahawh Hmong
  * Noto Sans Palmyrene
  * Noto Sans PauCinHau
  * Noto Sans PhagsPa
  * Noto Sans Phoenician
  * Noto Sans PsaPahlavi
  * Noto Sans Rejang
  * Noto Sans Runic
  * Noto Sans Samaritan
  * Noto Sans Saurashtra
  * Noto Sans Sharada
  * Noto Sans Shavian
  * Noto Sans Siddham
  * Noto Sans SignWrit
  * Noto Sans Sinhala
  * Noto Sans Sogdian
  * Noto Sans Sora Sompeng
  * Noto Sans Soyombo
  * Noto Sans Sundanese
  * Noto Sans Syloti Nagri
  * Noto Sans Symbols
  * Noto Sans Symbols2
  * Noto Sans Syriac
  * Noto Sans Tagalog
  * Noto Sans Tagbanwa
  * Noto Sans Tai Le
  * Noto Sans Tai Tham
  * Noto Sans Tai Viet
  * Noto Sans Takri
  * Noto Sans Tamil
  * Noto Sans Tamil Supplement
  * Noto Sans Telugu
  * Noto Sans Thaana
  * Noto Sans Thai
  * Noto Sans Tifinagh
  * Noto Sans Tifinagh APT
  * Noto Sans Tifinagh Adrar
  * Noto Sans Tifinagh Agraw Imazighen
  * Noto Sans Tifinagh Ahaggar
  * Noto Sans Tifinagh Air
  * Noto Sans Tifinagh Azawagh
  * Noto Sans Tifinagh Ghat
  * Noto Sans Tifinagh Hawad
  * Noto Sans Tifinagh Rhissa Ixa
  * Noto Sans Tifinagh SIL
  * Noto Sans Tifinagh Tawellemmet
  * Noto Sans Tirhuta
  * Noto Sans Ugaritic
  * Noto Sans Vai
  * Noto Sans Wancho
  * Noto Sans WarangCiti
  * Noto Sans Yi
  * Noto Sans Zanabazar
  * Noto Serif
  * Noto Serif Ahom
  * Noto Serif Armenian
  * Noto Serif Balinese
  * Noto Serif Bengali
  * Noto Serif Devanagari
  * Noto Serif Display
  * Noto Serif Dogra
  * Noto Serif Ethiopic
  * Noto Serif Georgian
  * Noto Serif Grantha
  * Noto Serif Gujarati
  * Noto Serif Gurmukhi
  * Noto Serif Hebrew
  * Noto Serif Hmong Nyiakeng
  * Noto Serif Kannada
  * Noto Serif Khmer
  * Noto Serif Khojki
  * Noto Serif Lao
  * Noto Serif Malayalam
  * Noto Serif Myanmar
  * Noto Serif Sinhala
  * Noto Serif Tamil
  * Noto Serif Tangut
  * Noto Serif Telugu
  * Noto Serif Thai
  * Noto Serif Tibetan
  * Noto Serif Yezidi
  * Noto Traditional Nushu
  * NotoSerifTamilSlantedmisc:Depends=
 .
 This package also pulls the fonts-noto-mono package to make up a
 base package set with Noto fonts.
 .
 The name "Noto" is short for "No Tofu",
 describing the aim of covering all living Unicode scripts
 (currently 65 are covered, at least partly.
 .
 Tofu (豆腐) is Japanese jargon
 for unicode replacement character "�" (U+FFFD)
 often displayed as replacement for unassigned or unknown characters.
Homepage: https://www.google.com/get/noto/

Package: fonts-noto-extra
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 334234
Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: fonts-noto
Version: 20201225-2
Replaces: fonts-noto-unhinted (<< 20201027-1~)
Breaks: fonts-noto-unhinted (<< 20201027-1~)
Enhances: fonts-noto-core, fonts-noto-mono
Description: "No Tofu" font families with large Unicode coverage (extra)
 Noto is a collection of font families,
 each visually harmonized across scripts.
 .
 This package contains extra weights for these Noto font families:
 .
  * Noto Kufi Arabic Black
  * Noto Kufi Arabic Extra Bold
  * Noto Kufi Arabic Extra Light
  * Noto Kufi Arabic Light
  * Noto Kufi Arabic Medium
  * Noto Kufi Arabic Semi Bold
  * Noto Kufi Arabic Thin
  * Noto Looped Lao Black
  * Noto Looped Lao Cond Blk
  * Noto Looped Lao Cond Bold
  * Noto Looped Lao Cond ExBd
  * Noto Looped Lao Cond ExLt
  * Noto Looped Lao Cond Lt
  * Noto Looped Lao Cond Med
  * Noto Looped Lao Cond SmBd
  * Noto Looped Lao Cond Thin
  * Noto Looped Lao Condensed
  * Noto Looped Lao ExCd Blk
  * Noto Looped Lao ExCd Bold
  * Noto Looped Lao ExCd ExBd
  * Noto Looped Lao ExCd ExLt
  * Noto Looped Lao ExCd Lt
  * Noto Looped Lao ExCd Med
  * Noto Looped Lao ExCd SmBd
  * Noto Looped Lao ExCd Thin
  * Noto Looped Lao ExtLight
  * Noto Looped Lao ExtraBold
  * Noto Looped Lao ExtraCond
  * Noto Looped Lao Light
  * Noto Looped Lao Medium
  * Noto Looped Lao SemiBold
  * Noto Looped Lao SemiCond
  * Noto Looped Lao SmCd Blk
  * Noto Looped Lao SmCd Bold
  * Noto Looped Lao SmCd ExBd
  * Noto Looped Lao SmCd ExtLt
  * Noto Looped Lao SmCd Lt
  * Noto Looped Lao SmCd Med
  * Noto Looped Lao SmCd SmBd
  * Noto Looped Lao SmCd Thin
  * Noto Looped Lao Thin
  * Noto Looped Thai Black
  * Noto Looped Thai Cond Blk
  * Noto Looped Thai Cond Bold
  * Noto Looped Thai Cond ExBd
  * Noto Looped Thai Cond ExLt
  * Noto Looped Thai Cond Lt
  * Noto Looped Thai Cond Med
  * Noto Looped Thai Cond SmBd
  * Noto Looped Thai Cond Thin
  * Noto Looped Thai Condensed
  * Noto Looped Thai ExCd Blk
  * Noto Looped Thai ExCd Bold
  * Noto Looped Thai ExCd ExBd
  * Noto Looped Thai ExCd ExLt
  * Noto Looped Thai ExCd Lt
  * Noto Looped Thai ExCd Med
  * Noto Looped Thai ExCd SmBd
  * Noto Looped Thai ExCd Thin
  * Noto Looped Thai ExtLight
  * Noto Looped Thai ExtraBold
  * Noto Looped Thai ExtraCond
  * Noto Looped Thai Light
  * Noto Looped Thai Medium
  * Noto Looped Thai SemiBold
  * Noto Looped Thai SemiCond
  * Noto Looped Thai SmCd Blk
  * Noto Looped Thai SmCd Bold
  * Noto Looped Thai SmCd ExBd
  * Noto Looped Thai SmCd ExLt
  * Noto Looped Thai SmCd Lt
  * Noto Looped Thai SmCd Med
  * Noto Looped Thai SmCd SmBd
  * Noto Looped Thai SmCd Thin
  * Noto Looped Thai Thin
  * Noto Naskh Arabic Medium
  * Noto Naskh Arabic Semi Bold
  * Noto Sans Arabic Blk
  * Noto Sans Arabic Cond
  * Noto Sans Arabic Cond Blk
  * Noto Sans Arabic Cond ExtBd
  * Noto Sans Arabic Cond ExtLt
  * Noto Sans Arabic Cond Light
  * Noto Sans Arabic Cond Med
  * Noto Sans Arabic Cond SemBd
  * Noto Sans Arabic Cond Thin
  * Noto Sans Arabic ExtBd
  * Noto Sans Arabic ExtCond
  * Noto Sans Arabic ExtCond Blk
  * Noto Sans Arabic ExtCond ExtBd
  * Noto Sans Arabic ExtCond ExtLt
  * Noto Sans Arabic ExtCond Light
  * Noto Sans Arabic ExtCond Med
  * Noto Sans Arabic ExtCond SemBd
  * Noto Sans Arabic ExtCond Thin
  * Noto Sans Arabic ExtLt
  * Noto Sans Arabic Light
  * Noto Sans Arabic Med
  * Noto Sans Arabic SemBd
  * Noto Sans Arabic SemCond
  * Noto Sans Arabic SemCond Blk
  * Noto Sans Arabic SemCond ExtBd
  * Noto Sans Arabic SemCond ExtLt
  * Noto Sans Arabic SemCond Light
  * Noto Sans Arabic SemCond Med
  * Noto Sans Arabic SemCond SemBd
  * Noto Sans Arabic SemCond Thin
  * Noto Sans Arabic Thin
  * Noto Sans Armenian Black
  * Noto Sans Armenian Condensed
  * Noto Sans Armenian Condensed Black
  * Noto Sans Armenian Condensed ExtraBold
  * Noto Sans Armenian Condensed ExtraLight
  * Noto Sans Armenian Condensed Light
  * Noto Sans Armenian Condensed Medium
  * Noto Sans Armenian Condensed SemiBold
  * Noto Sans Armenian Condensed Thin
  * Noto Sans Armenian ExtraBold
  * Noto Sans Armenian ExtraCondensed
  * Noto Sans Armenian ExtraCondensed Black
  * Noto Sans Armenian ExtraCondensed ExtraBold
  * Noto Sans Armenian ExtraCondensed ExtraLight
  * Noto Sans Armenian ExtraCondensed Light
  * Noto Sans Armenian ExtraCondensed Medium
  * Noto Sans Armenian ExtraCondensed SemiBold
  * Noto Sans Armenian ExtraCondensed Thin
  * Noto Sans Armenian ExtraLight
  * Noto Sans Armenian Light
  * Noto Sans Armenian Medium
  * Noto Sans Armenian SemiBold
  * Noto Sans Armenian SemiCondensed
  * Noto Sans Armenian SemiCondensed Black
  * Noto Sans Armenian SemiCondensed ExtraBold
  * Noto Sans Armenian SemiCondensed ExtraLight
  * Noto Sans Armenian SemiCondensed Light
  * Noto Sans Armenian SemiCondensed Medium
  * Noto Sans Armenian SemiCondensed SemiBold
  * Noto Sans Armenian SemiCondensed Thin
  * Noto Sans Armenian Thin
  * Noto Sans Balinese Medium
  * Noto Sans Balinese SemiBold
  * Noto Sans Bamum Medium
  * Noto Sans Bamum SemiBold
  * Noto Sans Bengali Black
  * Noto Sans Bengali Condensed
  * Noto Sans Bengali ExtraBold
  * Noto Sans Bengali ExtraCondensed
  * Noto Sans Bengali ExtraLight
  * Noto Sans Bengali Light
  * Noto Sans Bengali Medium
  * Noto Sans Bengali SemiBold
  * Noto Sans Bengali SemiCondensed
  * Noto Sans Bengali Thin
  * Noto Sans Black
  * Noto Sans CanAborig Bk
  * Noto Sans CanAborig Lt
  * Noto Sans CanAborig Md
  * Noto Sans CanAborig SmBd
  * Noto Sans CanAborig Th
  * Noto Sans CanAborig XBd
  * Noto Sans CanAborig XLt
  * Noto Sans Cham Blk
  * Noto Sans Cham ExtBd
  * Noto Sans Cham ExtLt
  * Noto Sans Cham Light
  * Noto Sans Cham Med
  * Noto Sans Cham SemBd
  * Noto Sans Cham Thin
  * Noto Sans Cherokee Blk
  * Noto Sans Cherokee ExtBd
  * Noto Sans Cherokee ExtLt
  * Noto Sans Cherokee Light
  * Noto Sans Cherokee Med
  * Noto Sans Cherokee SemBd
  * Noto Sans Cherokee Thin
  * Noto Sans Condensed
  * Noto Sans Condensed Black
  * Noto Sans Condensed ExtraBold
  * Noto Sans Condensed ExtraLight
  * Noto Sans Condensed Light
  * Noto Sans Condensed Medium
  * Noto Sans Condensed SemiBold
  * Noto Sans Condensed Thin
  * Noto Sans Devanagari Black
  * Noto Sans Devanagari Condensed
  * Noto Sans Devanagari Condensed Black
  * Noto Sans Devanagari Condensed ExtraBold
  * Noto Sans Devanagari Condensed ExtraLight
  * Noto Sans Devanagari Condensed Light
  * Noto Sans Devanagari Condensed Medium
  * Noto Sans Devanagari Condensed SemiBold
  * Noto Sans Devanagari Condensed Thin
  * Noto Sans Devanagari ExtraBold
  * Noto Sans Devanagari ExtraCondensed
  * Noto Sans Devanagari ExtraCondensed Black
  * Noto Sans Devanagari ExtraCondensed ExtraBold
  * Noto Sans Devanagari ExtraCondensed ExtraLight
  * Noto Sans Devanagari ExtraCondensed Light
  * Noto Sans Devanagari ExtraCondensed Medium
  * Noto Sans Devanagari ExtraCondensed SemiBold
  * Noto Sans Devanagari ExtraCondensed Thin
  * Noto Sans Devanagari ExtraLight
  * Noto Sans Devanagari Light
  * Noto Sans Devanagari Medium
  * Noto Sans Devanagari SemiBold
  * Noto Sans Devanagari SemiCondensed
  * Noto Sans Devanagari SemiCondensed Black
  * Noto Sans Devanagari SemiCondensed ExtraBold
  * Noto Sans Devanagari SemiCondensed ExtraLight
  * Noto Sans Devanagari SemiCondensed Light
  * Noto Sans Devanagari SemiCondensed Medium
  * Noto Sans Devanagari SemiCondensed SemiBold
  * Noto Sans Devanagari SemiCondensed Thin
  * Noto Sans Devanagari Thin
  * Noto Sans Display Black
  * Noto Sans Display Condensed
  * Noto Sans Display Condensed Black
  * Noto Sans Display Condensed ExtraBold
  * Noto Sans Display Condensed ExtraLight
  * Noto Sans Display Condensed Light
  * Noto Sans Display Condensed Medium
  * Noto Sans Display Condensed SemiBold
  * Noto Sans Display Condensed Thin
  * Noto Sans Display ExtraBold
  * Noto Sans Display ExtraCondensed
  * Noto Sans Display ExtraCondensed Black
  * Noto Sans Display ExtraCondensed ExtraBold
  * Noto Sans Display ExtraCondensed ExtraLight
  * Noto Sans Display ExtraCondensed Light
  * Noto Sans Display ExtraCondensed Medium
  * Noto Sans Display ExtraCondensed SemiBold
  * Noto Sans Display ExtraCondensed Thin
  * Noto Sans Display ExtraLight
  * Noto Sans Display Light
  * Noto Sans Display Medium
  * Noto Sans Display SemiBold
  * Noto Sans Display SemiCondensed
  * Noto Sans Display SemiCondensed Black
  * Noto Sans Display SemiCondensed ExtraBold
  * Noto Sans Display SemiCondensed ExtraLight
  * Noto Sans Display SemiCondensed Light
  * Noto Sans Display SemiCondensed Medium
  * Noto Sans Display SemiCondensed SemiBold
  * Noto Sans Display SemiCondensed Thin
  * Noto Sans Display Thin
  * Noto Sans Ethiopic Blk
  * Noto Sans Ethiopic Cond
  * Noto Sans Ethiopic Cond Blk
  * Noto Sans Ethiopic Cond ExtBd
  * Noto Sans Ethiopic Cond ExtLt
  * Noto Sans Ethiopic Cond Light
  * Noto Sans Ethiopic Cond Med
  * Noto Sans Ethiopic Cond SemBd
  * Noto Sans Ethiopic Cond Thin
  * Noto Sans Ethiopic ExtBd
  * Noto Sans Ethiopic ExtCond
  * Noto Sans Ethiopic ExtCond Blk
  * Noto Sans Ethiopic ExtCond ExtBd
  * Noto Sans Ethiopic ExtCond ExtLt
  * Noto Sans Ethiopic ExtCond Light
  * Noto Sans Ethiopic ExtCond Med
  * Noto Sans Ethiopic ExtCond SemBd
  * Noto Sans Ethiopic ExtCond Thin
  * Noto Sans Ethiopic ExtLt
  * Noto Sans Ethiopic Light
  * Noto Sans Ethiopic Med
  * Noto Sans Ethiopic SemBd
  * Noto Sans Ethiopic SemCond
  * Noto Sans Ethiopic SemCond Blk
  * Noto Sans Ethiopic SemCond ExtBd
  * Noto Sans Ethiopic SemCond ExtLt
  * Noto Sans Ethiopic SemCond Light
  * Noto Sans Ethiopic SemCond Med
  * Noto Sans Ethiopic SemCond SemBd
  * Noto Sans Ethiopic SemCond Thin
  * Noto Sans Ethiopic Thin
  * Noto Sans ExtraBold
  * Noto Sans ExtraCondensed
  * Noto Sans ExtraCondensed Black
  * Noto Sans ExtraCondensed ExtraBold
  * Noto Sans ExtraCondensed ExtraLight
  * Noto Sans ExtraCondensed Light
  * Noto Sans ExtraCondensed Medium
  * Noto Sans ExtraCondensed SemiBold
  * Noto Sans ExtraCondensed Thin
  * Noto Sans ExtraLight
  * Noto Sans Georgian Blk
  * Noto Sans Georgian Cond
  * Noto Sans Georgian Cond Blk
  * Noto Sans Georgian Cond ExtBd
  * Noto Sans Georgian Cond ExtLt
  * Noto Sans Georgian Cond Light
  * Noto Sans Georgian Cond Med
  * Noto Sans Georgian Cond SemBd
  * Noto Sans Georgian Cond Thin
  * Noto Sans Georgian ExtBd
  * Noto Sans Georgian ExtCond
  * Noto Sans Georgian ExtCond Blk
  * Noto Sans Georgian ExtCond ExtBd
  * Noto Sans Georgian ExtCond ExtLt
  * Noto Sans Georgian ExtCond Light
  * Noto Sans Georgian ExtCond Med
  * Noto Sans Georgian ExtCond SemBd
  * Noto Sans Georgian ExtCond Thin
  * Noto Sans Georgian ExtLt
  * Noto Sans Georgian Light
  * Noto Sans Georgian Med
  * Noto Sans Georgian SemBd
  * Noto Sans Georgian SemCond
  * Noto Sans Georgian SemCond Blk
  * Noto Sans Georgian SemCond ExtBd
  * Noto Sans Georgian SemCond ExtLt
  * Noto Sans Georgian SemCond Light
  * Noto Sans Georgian SemCond Med
  * Noto Sans Georgian SemCond SemBd
  * Noto Sans Georgian SemCond Thin
  * Noto Sans Georgian Thin
  * Noto Sans Gujarati Black
  * Noto Sans Gujarati Condensed
  * Noto Sans Gujarati Condensed Black
  * Noto Sans Gujarati Condensed ExtraBold
  * Noto Sans Gujarati Condensed ExtraLight
  * Noto Sans Gujarati Condensed Light
  * Noto Sans Gujarati Condensed Medium
  * Noto Sans Gujarati Condensed SemiBold
  * Noto Sans Gujarati Condensed Thin
  * Noto Sans Gujarati ExtraBold
  * Noto Sans Gujarati ExtraCondensed
  * Noto Sans Gujarati ExtraCondensed Black
  * Noto Sans Gujarati ExtraCondensed ExtraBold
  * Noto Sans Gujarati ExtraCondensed ExtraLight
  * Noto Sans Gujarati ExtraCondensed Light
  * Noto Sans Gujarati ExtraCondensed Medium
  * Noto Sans Gujarati ExtraCondensed SemiBold
  * Noto Sans Gujarati ExtraCondensed Thin
  * Noto Sans Gujarati ExtraLight
  * Noto Sans Gujarati Light
  * Noto Sans Gujarati Medium
  * Noto Sans Gujarati SemiBold
  * Noto Sans Gujarati SemiCondensed
  * Noto Sans Gujarati SemiCondensed Black
  * Noto Sans Gujarati SemiCondensed ExtraBold
  * Noto Sans Gujarati SemiCondensed ExtraLight
  * Noto Sans Gujarati SemiCondensed Light
  * Noto Sans Gujarati SemiCondensed Medium
  * Noto Sans Gujarati SemiCondensed SemiBold
  * Noto Sans Gujarati SemiCondensed Thin
  * Noto Sans Gujarati Thin
  * Noto Sans Gurmukhi Black
  * Noto Sans Gurmukhi Condensed
  * Noto Sans Gurmukhi Condensed Black
  * Noto Sans Gurmukhi Condensed ExtraBold
  * Noto Sans Gurmukhi Condensed ExtraLight
  * Noto Sans Gurmukhi Condensed Light
  * Noto Sans Gurmukhi Condensed Medium
  * Noto Sans Gurmukhi Condensed SemiBold
  * Noto Sans Gurmukhi Condensed Thin
  * Noto Sans Gurmukhi ExtraBold
  * Noto Sans Gurmukhi ExtraCondensed
  * Noto Sans Gurmukhi ExtraCondensed Black
  * Noto Sans Gurmukhi ExtraCondensed ExtraBold
  * Noto Sans Gurmukhi ExtraCondensed ExtraLight
  * Noto Sans Gurmukhi ExtraCondensed Light
  * Noto Sans Gurmukhi ExtraCondensed Medium
  * Noto Sans Gurmukhi ExtraCondensed SemiBold
  * Noto Sans Gurmukhi ExtraCondensed Thin
  * Noto Sans Gurmukhi ExtraLight
  * Noto Sans Gurmukhi Light
  * Noto Sans Gurmukhi Medium
  * Noto Sans Gurmukhi SemiBold
  * Noto Sans Gurmukhi SemiCondensed
  * Noto Sans Gurmukhi SemiCondensed Black
  * Noto Sans Gurmukhi SemiCondensed ExtraBold
  * Noto Sans Gurmukhi SemiCondensed ExtraLight
  * Noto Sans Gurmukhi SemiCondensed Light
  * Noto Sans Gurmukhi SemiCondensed Medium
  * Noto Sans Gurmukhi SemiCondensed SemiBold
  * Noto Sans Gurmukhi SemiCondensed Thin
  * Noto Sans Gurmukhi Thin
  * Noto Sans Hanifi Rohingya Medium
  * Noto Sans Hanifi Rohingya SemiBold
  * Noto Sans Hebrew Blk
  * Noto Sans Hebrew Cond
  * Noto Sans Hebrew Cond Blk
  * Noto Sans Hebrew Cond ExtBd
  * Noto Sans Hebrew Cond ExtLt
  * Noto Sans Hebrew Cond Light
  * Noto Sans Hebrew Cond Med
  * Noto Sans Hebrew Cond SemBd
  * Noto Sans Hebrew Cond Thin
  * Noto Sans Hebrew ExtBd
  * Noto Sans Hebrew ExtCond
  * Noto Sans Hebrew ExtCond Blk
  * Noto Sans Hebrew ExtCond ExtBd
  * Noto Sans Hebrew ExtCond ExtLt
  * Noto Sans Hebrew ExtCond Light
  * Noto Sans Hebrew ExtCond Med
  * Noto Sans Hebrew ExtCond SemBd
  * Noto Sans Hebrew ExtCond Thin
  * Noto Sans Hebrew ExtLt
  * Noto Sans Hebrew Light
  * Noto Sans Hebrew Med
  * Noto Sans Hebrew SemBd
  * Noto Sans Hebrew SemCond
  * Noto Sans Hebrew SemCond Blk
  * Noto Sans Hebrew SemCond ExtBd
  * Noto Sans Hebrew SemCond ExtLt
  * Noto Sans Hebrew SemCond Light
  * Noto Sans Hebrew SemCond Med
  * Noto Sans Hebrew SemCond SemBd
  * Noto Sans Hebrew SemCond Thin
  * Noto Sans Hebrew Thin
  * Noto Sans Kannada Black
  * Noto Sans Kannada Condensed
  * Noto Sans Kannada Condensed Black
  * Noto Sans Kannada Condensed ExtraBold
  * Noto Sans Kannada Condensed ExtraLight
  * Noto Sans Kannada Condensed Light
  * Noto Sans Kannada Condensed Medium
  * Noto Sans Kannada Condensed SemiBold
  * Noto Sans Kannada Condensed Thin
  * Noto Sans Kannada ExtraBold
  * Noto Sans Kannada ExtraCondensed
  * Noto Sans Kannada ExtraCondensed Black
  * Noto Sans Kannada ExtraCondensed ExtraBold
  * Noto Sans Kannada ExtraCondensed ExtraLight
  * Noto Sans Kannada ExtraCondensed Light
  * Noto Sans Kannada ExtraCondensed Medium
  * Noto Sans Kannada ExtraCondensed SemiBold
  * Noto Sans Kannada ExtraCondensed Thin
  * Noto Sans Kannada ExtraLight
  * Noto Sans Kannada Light
  * Noto Sans Kannada Medium
  * Noto Sans Kannada SemiBold
  * Noto Sans Kannada SemiCondensed
  * Noto Sans Kannada SemiCondensed Black
  * Noto Sans Kannada SemiCondensed ExtraBold
  * Noto Sans Kannada SemiCondensed ExtraLight
  * Noto Sans Kannada SemiCondensed Light
  * Noto Sans Kannada SemiCondensed Medium
  * Noto Sans Kannada SemiCondensed SemiBold
  * Noto Sans Kannada SemiCondensed Thin
  * Noto Sans Kannada Thin
  * Noto Sans Kayah Li Medium
  * Noto Sans Kayah Li SemiBold
  * Noto Sans Khmer Black
  * Noto Sans Khmer Condensed
  * Noto Sans Khmer Condensed Black
  * Noto Sans Khmer Condensed ExtraBold
  * Noto Sans Khmer Condensed ExtraLight
  * Noto Sans Khmer Condensed Light
  * Noto Sans Khmer Condensed Medium
  * Noto Sans Khmer Condensed SemiBold
  * Noto Sans Khmer Condensed Thin
  * Noto Sans Khmer ExtraBold
  * Noto Sans Khmer ExtraCondensed
  * Noto Sans Khmer ExtraCondensed Black
  * Noto Sans Khmer ExtraCondensed ExtraBold
  * Noto Sans Khmer ExtraCondensed ExtraLight
  * Noto Sans Khmer ExtraCondensed Light
  * Noto Sans Khmer ExtraCondensed Medium
  * Noto Sans Khmer ExtraCondensed SemiBold
  * Noto Sans Khmer ExtraCondensed Thin
  * Noto Sans Khmer ExtraLight
  * Noto Sans Khmer Light
  * Noto Sans Khmer Medium
  * Noto Sans Khmer SemiBold
  * Noto Sans Khmer SemiCondensed
  * Noto Sans Khmer SemiCondensed Black
  * Noto Sans Khmer SemiCondensed ExtraBold
  * Noto Sans Khmer SemiCondensed ExtraLight
  * Noto Sans Khmer SemiCondensed Light
  * Noto Sans Khmer SemiCondensed Medium
  * Noto Sans Khmer SemiCondensed SemiBold
  * Noto Sans Khmer SemiCondensed Thin
  * Noto Sans Khmer Thin
  * Noto Sans Lao Blk
  * Noto Sans Lao Cond
  * Noto Sans Lao Cond Blk
  * Noto Sans Lao Cond ExtBd
  * Noto Sans Lao Cond ExtLt
  * Noto Sans Lao Cond Light
  * Noto Sans Lao Cond Med
  * Noto Sans Lao Cond SemBd
  * Noto Sans Lao Cond Thin
  * Noto Sans Lao ExtBd
  * Noto Sans Lao ExtCond
  * Noto Sans Lao ExtCond Blk
  * Noto Sans Lao ExtCond ExtBd
  * Noto Sans Lao ExtCond ExtLt
  * Noto Sans Lao ExtCond Light
  * Noto Sans Lao ExtCond Med
  * Noto Sans Lao ExtCond SemBd
  * Noto Sans Lao ExtCond Thin
  * Noto Sans Lao ExtLt
  * Noto Sans Lao Light
  * Noto Sans Lao Med
  * Noto Sans Lao SemBd
  * Noto Sans Lao SemCond
  * Noto Sans Lao SemCond Blk
  * Noto Sans Lao SemCond ExtBd
  * Noto Sans Lao SemCond ExtLt
  * Noto Sans Lao SemCond Light
  * Noto Sans Lao SemCond Med
  * Noto Sans Lao SemCond SemBd
  * Noto Sans Lao SemCond Thin
  * Noto Sans Lao Thin
  * Noto Sans Light
  * Noto Sans Lisu Medium
  * Noto Sans Lisu Semi Bold
  * Noto Sans Malayalam Black
  * Noto Sans Malayalam Condensed
  * Noto Sans Malayalam Condensed Black
  * Noto Sans Malayalam Condensed ExtraBold
  * Noto Sans Malayalam Condensed ExtraLight
  * Noto Sans Malayalam Condensed Light
  * Noto Sans Malayalam Condensed Medium
  * Noto Sans Malayalam Condensed SemiBold
  * Noto Sans Malayalam Condensed Thin
  * Noto Sans Malayalam ExtraBold
  * Noto Sans Malayalam ExtraCondensed
  * Noto Sans Malayalam ExtraCondensed Black
  * Noto Sans Malayalam ExtraCondensed ExtraBold
  * Noto Sans Malayalam ExtraCondensed ExtraLight
  * Noto Sans Malayalam ExtraCondensed Light
  * Noto Sans Malayalam ExtraCondensed Medium
  * Noto Sans Malayalam ExtraCondensed SemiBold
  * Noto Sans Malayalam ExtraCondensed Thin
  * Noto Sans Malayalam ExtraLight
  * Noto Sans Malayalam Light
  * Noto Sans Malayalam Medium
  * Noto Sans Malayalam SemiBold
  * Noto Sans Malayalam SemiCondensed
  * Noto Sans Malayalam SemiCondensed Black
  * Noto Sans Malayalam SemiCondensed ExtraBold
  * Noto Sans Malayalam SemiCondensed ExtraLight
  * Noto Sans Malayalam SemiCondensed Light
  * Noto Sans Malayalam SemiCondensed Medium
  * Noto Sans Malayalam SemiCondensed SemiBold
  * Noto Sans Malayalam SemiCondensed Thin
  * Noto Sans Malayalam Thin
  * Noto Sans Medefaidrin Medium
  * Noto Sans Medefaidrin SemiBold
  * Noto Sans Medium
  * Noto Sans MeeteiMayek Black
  * Noto Sans MeeteiMayek ExtraBold
  * Noto Sans MeeteiMayek ExtraLight
  * Noto Sans MeeteiMayek Light
  * Noto Sans MeeteiMayek Medium
  * Noto Sans MeeteiMayek SemiBold
  * Noto Sans MeeteiMayek Thin
  * Noto Sans Mono Black
  * Noto Sans Mono Condensed
  * Noto Sans Mono Condensed Black
  * Noto Sans Mono Condensed ExtraBold
  * Noto Sans Mono Condensed ExtraLight
  * Noto Sans Mono Condensed Light
  * Noto Sans Mono Condensed Medium
  * Noto Sans Mono Condensed SemiBold
  * Noto Sans Mono Condensed Thin
  * Noto Sans Mono ExtraBold
  * Noto Sans Mono ExtraCondensed
  * Noto Sans Mono ExtraCondensed Black
  * Noto Sans Mono ExtraCondensed ExtraBold
  * Noto Sans Mono ExtraCondensed ExtraLight
  * Noto Sans Mono ExtraCondensed Light
  * Noto Sans Mono ExtraCondensed Medium
  * Noto Sans Mono ExtraCondensed SemiBold
  * Noto Sans Mono ExtraCondensed Thin
  * Noto Sans Mono ExtraLight
  * Noto Sans Mono Light
  * Noto Sans Mono Medium
  * Noto Sans Mono SemiBold
  * Noto Sans Mono SemiCondensed
  * Noto Sans Mono SemiCondensed Black
  * Noto Sans Mono SemiCondensed ExtraBold
  * Noto Sans Mono SemiCondensed ExtraLight
  * Noto Sans Mono SemiCondensed Light
  * Noto Sans Mono SemiCondensed Medium
  * Noto Sans Mono SemiCondensed SemiBold
  * Noto Sans Mono SemiCondensed Thin
  * Noto Sans Mono Thin
  * Noto Sans Myanmar Blk
  * Noto Sans Myanmar Cond
  * Noto Sans Myanmar Cond Blk
  * Noto Sans Myanmar Cond ExtBd
  * Noto Sans Myanmar Cond ExtLt
  * Noto Sans Myanmar Cond Light
  * Noto Sans Myanmar Cond Med
  * Noto Sans Myanmar Cond SemBd
  * Noto Sans Myanmar Cond Thin
  * Noto Sans Myanmar ExtBd
  * Noto Sans Myanmar ExtCond
  * Noto Sans Myanmar ExtCond Blk
  * Noto Sans Myanmar ExtCond ExtBd
  * Noto Sans Myanmar ExtCond ExtLt
  * Noto Sans Myanmar ExtCond Light
  * Noto Sans Myanmar ExtCond Med
  * Noto Sans Myanmar ExtCond SemBd
  * Noto Sans Myanmar ExtCond Thin
  * Noto Sans Myanmar ExtLt
  * Noto Sans Myanmar Light
  * Noto Sans Myanmar Med
  * Noto Sans Myanmar SemBd
  * Noto Sans Myanmar SemCond
  * Noto Sans Myanmar SemCond Blk
  * Noto Sans Myanmar SemCond ExtBd
  * Noto Sans Myanmar SemCond ExtLt
  * Noto Sans Myanmar SemCond Light
  * Noto Sans Myanmar SemCond Med
  * Noto Sans Myanmar SemCond SemBd
  * Noto Sans Myanmar SemCond Thin
  * Noto Sans Myanmar Thin
  * Noto Sans Ol Chiki Medium
  * Noto Sans Ol Chiki SemiBold
  * Noto Sans Oriya Blk
  * Noto Sans Oriya Cond
  * Noto Sans Oriya Cond Blk
  * Noto Sans Oriya Cond Bold
  * Noto Sans Oriya Cond Thin
  * Noto Sans Oriya ExtCond
  * Noto Sans Oriya ExtCond Blk
  * Noto Sans Oriya ExtCond Bold
  * Noto Sans Oriya ExtCond Thin
  * Noto Sans Oriya Thin
  * Noto Sans SemiBold
  * Noto Sans SemiCondensed
  * Noto Sans SemiCondensed Black
  * Noto Sans SemiCondensed ExtraBold
  * Noto Sans SemiCondensed ExtraLight
  * Noto Sans SemiCondensed Light
  * Noto Sans SemiCondensed Medium
  * Noto Sans SemiCondensed SemiBold
  * Noto Sans SemiCondensed Thin
  * Noto Sans Sinhala Black
  * Noto Sans Sinhala Condensed
  * Noto Sans Sinhala Condensed Black
  * Noto Sans Sinhala Condensed ExtraBold
  * Noto Sans Sinhala Condensed ExtraLight
  * Noto Sans Sinhala Condensed Light
  * Noto Sans Sinhala Condensed Medium
  * Noto Sans Sinhala Condensed SemiBold
  * Noto Sans Sinhala Condensed Thin
  * Noto Sans Sinhala ExtraBold
  * Noto Sans Sinhala ExtraCondensed
  * Noto Sans Sinhala ExtraCondensed Black
  * Noto Sans Sinhala ExtraCondensed ExtraBold
  * Noto Sans Sinhala ExtraCondensed ExtraLight
  * Noto Sans Sinhala ExtraCondensed Light
  * Noto Sans Sinhala ExtraCondensed Medium
  * Noto Sans Sinhala ExtraCondensed SemiBold
  * Noto Sans Sinhala ExtraCondensed Thin
  * Noto Sans Sinhala ExtraLight
  * Noto Sans Sinhala Light
  * Noto Sans Sinhala Medium
  * Noto Sans Sinhala SemiBold
  * Noto Sans Sinhala SemiCondensed
  * Noto Sans Sinhala SemiCondensed Black
  * Noto Sans Sinhala SemiCondensed ExtraBold
  * Noto Sans Sinhala SemiCondensed ExtraLight
  * Noto Sans Sinhala SemiCondensed Light
  * Noto Sans Sinhala SemiCondensed Medium
  * Noto Sans Sinhala SemiCondensed SemiBold
  * Noto Sans Sinhala SemiCondensed Thin
  * Noto Sans Sinhala Thin
  * Noto Sans Sora Sompeng Medium
  * Noto Sans Sora Sompeng Semi Bold
  * Noto Sans Sundanese
  * Noto Sans Symbols Black
  * Noto Sans Symbols ExtraBold
  * Noto Sans Symbols ExtraLight
  * Noto Sans Symbols Light
  * Noto Sans Symbols Medium
  * Noto Sans Symbols SemiBold
  * Noto Sans Symbols Thin
  * Noto Sans Syriac Black
  * Noto Sans Syriac Thin
  * Noto Sans Tai Tham Medium
  * Noto Sans Tai Tham SemiBold
  * Noto Sans Tamil Black
  * Noto Sans Tamil Condensed
  * Noto Sans Tamil Condensed Black
  * Noto Sans Tamil Condensed ExtraBold
  * Noto Sans Tamil Condensed ExtraLight
  * Noto Sans Tamil Condensed Light
  * Noto Sans Tamil Condensed Medium
  * Noto Sans Tamil Condensed SemiBold
  * Noto Sans Tamil Condensed Thin
  * Noto Sans Tamil ExtraBold
  * Noto Sans Tamil ExtraCondensed
  * Noto Sans Tamil ExtraCondensed Black
  * Noto Sans Tamil ExtraCondensed ExtraBold
  * Noto Sans Tamil ExtraCondensed ExtraLight
  * Noto Sans Tamil ExtraCondensed Light
  * Noto Sans Tamil ExtraCondensed Medium
  * Noto Sans Tamil ExtraCondensed SemiBold
  * Noto Sans Tamil ExtraCondensed Thin
  * Noto Sans Tamil ExtraLight
  * Noto Sans Tamil Light
  * Noto Sans Tamil Medium
  * Noto Sans Tamil SemiBold
  * Noto Sans Tamil SemiCondensed
  * Noto Sans Tamil SemiCondensed Black
  * Noto Sans Tamil SemiCondensed ExtraBold
  * Noto Sans Tamil SemiCondensed ExtraLight
  * Noto Sans Tamil SemiCondensed Light
  * Noto Sans Tamil SemiCondensed Medium
  * Noto Sans Tamil SemiCondensed SemiBold
  * Noto Sans Tamil SemiCondensed Thin
  * Noto Sans Tamil Thin
  * Noto Sans Telugu Black
  * Noto Sans Telugu Condensed
  * Noto Sans Telugu Condensed Black
  * Noto Sans Telugu Condensed ExtraBold
  * Noto Sans Telugu Condensed ExtraLight
  * Noto Sans Telugu Condensed Light
  * Noto Sans Telugu Condensed Medium
  * Noto Sans Telugu Condensed SemiBold
  * Noto Sans Telugu Condensed Thin
  * Noto Sans Telugu ExtraBold
  * Noto Sans Telugu ExtraCondensed
  * Noto Sans Telugu ExtraCondensed Black
  * Noto Sans Telugu ExtraCondensed ExtraBold
  * Noto Sans Telugu ExtraCondensed ExtraLight
  * Noto Sans Telugu ExtraCondensed Light
  * Noto Sans Telugu ExtraCondensed Medium
  * Noto Sans Telugu ExtraCondensed SemiBold
  * Noto Sans Telugu ExtraCondensed Thin
  * Noto Sans Telugu ExtraLight
  * Noto Sans Telugu Light
  * Noto Sans Telugu Medium
  * Noto Sans Telugu SemiBold
  * Noto Sans Telugu SemiCondensed
  * Noto Sans Telugu SemiCondensed Black
  * Noto Sans Telugu SemiCondensed ExtraBold
  * Noto Sans Telugu SemiCondensed ExtraLight
  * Noto Sans Telugu SemiCondensed Light
  * Noto Sans Telugu SemiCondensed Medium
  * Noto Sans Telugu SemiCondensed SemiBold
  * Noto Sans Telugu SemiCondensed Thin
  * Noto Sans Telugu Thin
  * Noto Sans Thaana Black
  * Noto Sans Thaana ExtraBold
  * Noto Sans Thaana ExtraLight
  * Noto Sans Thaana Light
  * Noto Sans Thaana Medium
  * Noto Sans Thaana SemiBold
  * Noto Sans Thaana Thin
  * Noto Sans Thai Blk
  * Noto Sans Thai Cond
  * Noto Sans Thai Cond Blk
  * Noto Sans Thai Cond ExtBd
  * Noto Sans Thai Cond ExtLt
  * Noto Sans Thai Cond Light
  * Noto Sans Thai Cond Med
  * Noto Sans Thai Cond SemBd
  * Noto Sans Thai Cond Thin
  * Noto Sans Thai ExtBd
  * Noto Sans Thai ExtCond
  * Noto Sans Thai ExtCond Blk
  * Noto Sans Thai ExtCond ExtBd
  * Noto Sans Thai ExtCond ExtLt
  * Noto Sans Thai ExtCond Light
  * Noto Sans Thai ExtCond Med
  * Noto Sans Thai ExtCond SemBd
  * Noto Sans Thai ExtCond Thin
  * Noto Sans Thai ExtLt
  * Noto Sans Thai Light
  * Noto Sans Thai Med
  * Noto Sans Thai SemBd
  * Noto Sans Thai SemCond
  * Noto Sans Thai SemCond Blk
  * Noto Sans Thai SemCond ExtBd
  * Noto Sans Thai SemCond ExtLt
  * Noto Sans Thai SemCond Light
  * Noto Sans Thai SemCond Med
  * Noto Sans Thai SemCond SemBd
  * Noto Sans Thai SemCond Thin
  * Noto Sans Thai Thin
  * Noto Sans Thin
  * Noto Serif Armenian Black
  * Noto Serif Armenian Condensed
  * Noto Serif Armenian Condensed Black
  * Noto Serif Armenian Condensed ExtraBold
  * Noto Serif Armenian Condensed ExtraLight
  * Noto Serif Armenian Condensed Light
  * Noto Serif Armenian Condensed Medium
  * Noto Serif Armenian Condensed SemiBold
  * Noto Serif Armenian Condensed Thin
  * Noto Serif Armenian ExtraBold
  * Noto Serif Armenian ExtraCondensed
  * Noto Serif Armenian ExtraCondensed Black
  * Noto Serif Armenian ExtraCondensed ExtraBold
  * Noto Serif Armenian ExtraCondensed ExtraLight
  * Noto Serif Armenian ExtraCondensed Light
  * Noto Serif Armenian ExtraCondensed Medium
  * Noto Serif Armenian ExtraCondensed SemiBold
  * Noto Serif Armenian ExtraCondensed Thin
  * Noto Serif Armenian ExtraLight
  * Noto Serif Armenian Light
  * Noto Serif Armenian Medium
  * Noto Serif Armenian SemiBold
  * Noto Serif Armenian SemiCondensed
  * Noto Serif Armenian SemiCondensed Black
  * Noto Serif Armenian SemiCondensed ExtraBold
  * Noto Serif Armenian SemiCondensed ExtraLight
  * Noto Serif Armenian SemiCondensed Light
  * Noto Serif Armenian SemiCondensed Medium
  * Noto Serif Armenian SemiCondensed SemiBold
  * Noto Serif Armenian SemiCondensed Thin
  * Noto Serif Armenian Thin
  * Noto Serif Bengali Black
  * Noto Serif Bengali Condensed
  * Noto Serif Bengali Condensed Black
  * Noto Serif Bengali Condensed ExtraBold
  * Noto Serif Bengali Condensed ExtraLight
  * Noto Serif Bengali Condensed Light
  * Noto Serif Bengali Condensed Medium
  * Noto Serif Bengali Condensed SemiBold
  * Noto Serif Bengali Condensed Thin
  * Noto Serif Bengali ExtraBold
  * Noto Serif Bengali ExtraCondensed
  * Noto Serif Bengali ExtraCondensed Black
  * Noto Serif Bengali ExtraCondensed ExtraBold
  * Noto Serif Bengali ExtraCondensed ExtraLight
  * Noto Serif Bengali ExtraCondensed Light
  * Noto Serif Bengali ExtraCondensed Medium
  * Noto Serif Bengali ExtraCondensed SemiBold
  * Noto Serif Bengali ExtraCondensed Thin
  * Noto Serif Bengali ExtraLight
  * Noto Serif Bengali Light
  * Noto Serif Bengali Medium
  * Noto Serif Bengali SemiBold
  * Noto Serif Bengali SemiCondensed
  * Noto Serif Bengali SemiCondensed Black
  * Noto Serif Bengali SemiCondensed ExtraBold
  * Noto Serif Bengali SemiCondensed ExtraLight
  * Noto Serif Bengali SemiCondensed Light
  * Noto Serif Bengali SemiCondensed Medium
  * Noto Serif Bengali SemiCondensed SemiBold
  * Noto Serif Bengali SemiCondensed Thin
  * Noto Serif Bengali Thin
  * Noto Serif Black
  * Noto Serif Condensed
  * Noto Serif Condensed Black
  * Noto Serif Condensed ExtraBold
  * Noto Serif Condensed ExtraLight
  * Noto Serif Condensed Light
  * Noto Serif Condensed Medium
  * Noto Serif Condensed SemiBold
  * Noto Serif Condensed Thin
  * Noto Serif Devanagari Black
  * Noto Serif Devanagari Condensed
  * Noto Serif Devanagari Condensed Black
  * Noto Serif Devanagari Condensed ExtraBold
  * Noto Serif Devanagari Condensed ExtraLight
  * Noto Serif Devanagari Condensed Light
  * Noto Serif Devanagari Condensed Medium
  * Noto Serif Devanagari Condensed SemiBold
  * Noto Serif Devanagari Condensed Thin
  * Noto Serif Devanagari ExtraBold
  * Noto Serif Devanagari ExtraCondensed
  * Noto Serif Devanagari ExtraCondensed Black
  * Noto Serif Devanagari ExtraCondensed ExtraBold
  * Noto Serif Devanagari ExtraCondensed ExtraLight
  * Noto Serif Devanagari ExtraCondensed Light
  * Noto Serif Devanagari ExtraCondensed Medium
  * Noto Serif Devanagari ExtraCondensed SemiBold
  * Noto Serif Devanagari ExtraCondensed Thin
  * Noto Serif Devanagari ExtraLight
  * Noto Serif Devanagari Light
  * Noto Serif Devanagari Medium
  * Noto Serif Devanagari SemiBold
  * Noto Serif Devanagari SemiCondensed
  * Noto Serif Devanagari SemiCondensed Black
  * Noto Serif Devanagari SemiCondensed ExtraBold
  * Noto Serif Devanagari SemiCondensed ExtraLight
  * Noto Serif Devanagari SemiCondensed Light
  * Noto Serif Devanagari SemiCondensed Medium
  * Noto Serif Devanagari SemiCondensed SemiBold
  * Noto Serif Devanagari SemiCondensed Thin
  * Noto Serif Devanagari Thin
  * Noto Serif Display Black
  * Noto Serif Display Condensed
  * Noto Serif Display Condensed Black
  * Noto Serif Display Condensed ExtraBold
  * Noto Serif Display Condensed ExtraLight
  * Noto Serif Display Condensed Light
  * Noto Serif Display Condensed Medium
  * Noto Serif Display Condensed SemiBold
  * Noto Serif Display Condensed Thin
  * Noto Serif Display ExtraBold
  * Noto Serif Display ExtraCondensed
  * Noto Serif Display ExtraCondensed Black
  * Noto Serif Display ExtraCondensed ExtraBold
  * Noto Serif Display ExtraCondensed ExtraLight
  * Noto Serif Display ExtraCondensed Light
  * Noto Serif Display ExtraCondensed Medium
  * Noto Serif Display ExtraCondensed SemiBold
  * Noto Serif Display ExtraCondensed Thin
  * Noto Serif Display ExtraLight
  * Noto Serif Display Light
  * Noto Serif Display Medium
  * Noto Serif Display SemiBold
  * Noto Serif Display SemiCondensed
  * Noto Serif Display SemiCondensed Black
  * Noto Serif Display SemiCondensed ExtraBold
  * Noto Serif Display SemiCondensed ExtraLight
  * Noto Serif Display SemiCondensed Light
  * Noto Serif Display SemiCondensed Medium
  * Noto Serif Display SemiCondensed SemiBold
  * Noto Serif Display SemiCondensed Thin
  * Noto Serif Display Thin
  * Noto Serif Ethiopic Bk
  * Noto Serif Ethiopic Cn
  * Noto Serif Ethiopic Cn Bk
  * Noto Serif Ethiopic Cn Lt
  * Noto Serif Ethiopic Cn Md
  * Noto Serif Ethiopic Cn SmBd
  * Noto Serif Ethiopic Cn Th
  * Noto Serif Ethiopic Cn XBd
  * Noto Serif Ethiopic Cn XLt
  * Noto Serif Ethiopic Lt
  * Noto Serif Ethiopic Md
  * Noto Serif Ethiopic SmBd
  * Noto Serif Ethiopic SmCn
  * Noto Serif Ethiopic SmCn Bk
  * Noto Serif Ethiopic SmCn Lt
  * Noto Serif Ethiopic SmCn Md
  * Noto Serif Ethiopic SmCn SmBd
  * Noto Serif Ethiopic SmCn Th
  * Noto Serif Ethiopic SmCn XBd
  * Noto Serif Ethiopic SmCn XLt
  * Noto Serif Ethiopic Th
  * Noto Serif Ethiopic XBd
  * Noto Serif Ethiopic XCn
  * Noto Serif Ethiopic XCn Bk
  * Noto Serif Ethiopic XCn Lt
  * Noto Serif Ethiopic XCn Md
  * Noto Serif Ethiopic XCn SmBd
  * Noto Serif Ethiopic XCn Th
  * Noto Serif Ethiopic XCn XBd
  * Noto Serif Ethiopic XCn XLt
  * Noto Serif Ethiopic XLt
  * Noto Serif ExtraBold
  * Noto Serif ExtraCondensed
  * Noto Serif ExtraCondensed Black
  * Noto Serif ExtraCondensed ExtraBold
  * Noto Serif ExtraCondensed ExtraLight
  * Noto Serif ExtraCondensed Light
  * Noto Serif ExtraCondensed Medium
  * Noto Serif ExtraCondensed SemiBold
  * Noto Serif ExtraCondensed Thin
  * Noto Serif ExtraLight
  * Noto Serif Georgian Bk
  * Noto Serif Georgian Cn
  * Noto Serif Georgian Cn Bk
  * Noto Serif Georgian Cn Lt
  * Noto Serif Georgian Cn Md
  * Noto Serif Georgian Cn SmBd
  * Noto Serif Georgian Cn Th
  * Noto Serif Georgian Cn XBd
  * Noto Serif Georgian Cn XLt
  * Noto Serif Georgian Lt
  * Noto Serif Georgian Md
  * Noto Serif Georgian SmBd
  * Noto Serif Georgian SmCn
  * Noto Serif Georgian SmCn Bk
  * Noto Serif Georgian SmCn Lt
  * Noto Serif Georgian SmCn Md
  * Noto Serif Georgian SmCn SmBd
  * Noto Serif Georgian SmCn Th
  * Noto Serif Georgian SmCn XBd
  * Noto Serif Georgian SmCn XLt
  * Noto Serif Georgian Th
  * Noto Serif Georgian XBd
  * Noto Serif Georgian XCn
  * Noto Serif Georgian XCn Bk
  * Noto Serif Georgian XCn Lt
  * Noto Serif Georgian XCn Md
  * Noto Serif Georgian XCn SmBd
  * Noto Serif Georgian XCn Th
  * Noto Serif Georgian XCn XBd
  * Noto Serif Georgian XCn XLt
  * Noto Serif Georgian XLt
  * Noto Serif Gujarati Black
  * Noto Serif Gujarati ExtraBold
  * Noto Serif Gujarati ExtraLight
  * Noto Serif Gujarati Light
  * Noto Serif Gujarati Medium
  * Noto Serif Gujarati SemiBold
  * Noto Serif Gujarati Thin
  * Noto Serif Gurmukhi Black
  * Noto Serif Gurmukhi ExtraBold
  * Noto Serif Gurmukhi ExtraLight
  * Noto Serif Gurmukhi Light
  * Noto Serif Gurmukhi Medium
  * Noto Serif Gurmukhi SemiBold
  * Noto Serif Gurmukhi Thin
  * Noto Serif Hebrew Blk
  * Noto Serif Hebrew Cond
  * Noto Serif Hebrew Cond Blk
  * Noto Serif Hebrew Cond ExtBd
  * Noto Serif Hebrew Cond ExtLt
  * Noto Serif Hebrew Cond Light
  * Noto Serif Hebrew Cond Med
  * Noto Serif Hebrew Cond SemBd
  * Noto Serif Hebrew Cond Thin
  * Noto Serif Hebrew ExtBd
  * Noto Serif Hebrew ExtCond
  * Noto Serif Hebrew ExtCond Blk
  * Noto Serif Hebrew ExtCond ExtBd
  * Noto Serif Hebrew ExtCond ExtLt
  * Noto Serif Hebrew ExtCond Light
  * Noto Serif Hebrew ExtCond Med
  * Noto Serif Hebrew ExtCond SemBd
  * Noto Serif Hebrew ExtCond Thin
  * Noto Serif Hebrew ExtLt
  * Noto Serif Hebrew Light
  * Noto Serif Hebrew Med
  * Noto Serif Hebrew SemBd
  * Noto Serif Hebrew SemCond
  * Noto Serif Hebrew SemCond Blk
  * Noto Serif Hebrew SemCond ExtBd
  * Noto Serif Hebrew SemCond ExtLt
  * Noto Serif Hebrew SemCond Light
  * Noto Serif Hebrew SemCond Med
  * Noto Serif Hebrew SemCond SemBd
  * Noto Serif Hebrew SemCond Thin
  * Noto Serif Hebrew Thin
  * Noto Serif Hmong Nyiakeng Medium
  * Noto Serif Hmong Nyiakeng SemiBold
  * Noto Serif Kannada Black
  * Noto Serif Kannada ExtraBold
  * Noto Serif Kannada ExtraLight
  * Noto Serif Kannada Light
  * Noto Serif Kannada Medium
  * Noto Serif Kannada SemiBold
  * Noto Serif Kannada Thin
  * Noto Serif Khmer Black
  * Noto Serif Khmer Condensed
  * Noto Serif Khmer Condensed Black
  * Noto Serif Khmer Condensed ExtraBold
  * Noto Serif Khmer Condensed ExtraLight
  * Noto Serif Khmer Condensed Light
  * Noto Serif Khmer Condensed Medium
  * Noto Serif Khmer Condensed SemiBold
  * Noto Serif Khmer Condensed Thin
  * Noto Serif Khmer ExtraBold
  * Noto Serif Khmer ExtraCondensed
  * Noto Serif Khmer ExtraCondensed Black
  * Noto Serif Khmer ExtraCondensed ExtraBold
  * Noto Serif Khmer ExtraCondensed ExtraLight
  * Noto Serif Khmer ExtraCondensed Light
  * Noto Serif Khmer ExtraCondensed Medium
  * Noto Serif Khmer ExtraCondensed SemiBold
  * Noto Serif Khmer ExtraCondensed Thin
  * Noto Serif Khmer ExtraLight
  * Noto Serif Khmer Light
  * Noto Serif Khmer Medium
  * Noto Serif Khmer SemiBold
  * Noto Serif Khmer SemiCondensed
  * Noto Serif Khmer SemiCondensed Black
  * Noto Serif Khmer SemiCondensed ExtraBold
  * Noto Serif Khmer SemiCondensed ExtraLight
  * Noto Serif Khmer SemiCondensed Light
  * Noto Serif Khmer SemiCondensed Medium
  * Noto Serif Khmer SemiCondensed SemiBold
  * Noto Serif Khmer SemiCondensed Thin
  * Noto Serif Khmer Thin
  * Noto Serif Lao Blk
  * Noto Serif Lao Cond
  * Noto Serif Lao Cond Blk
  * Noto Serif Lao Cond ExtBd
  * Noto Serif Lao Cond ExtLt
  * Noto Serif Lao Cond Light
  * Noto Serif Lao Cond Med
  * Noto Serif Lao Cond SemBd
  * Noto Serif Lao Cond Thin
  * Noto Serif Lao ExtBd
  * Noto Serif Lao ExtCond
  * Noto Serif Lao ExtCond Blk
  * Noto Serif Lao ExtCond ExtBd
  * Noto Serif Lao ExtCond ExtLt
  * Noto Serif Lao ExtCond Light
  * Noto Serif Lao ExtCond Med
  * Noto Serif Lao ExtCond SemBd
  * Noto Serif Lao ExtCond Thin
  * Noto Serif Lao ExtLt
  * Noto Serif Lao Light
  * Noto Serif Lao Med
  * Noto Serif Lao SemBd
  * Noto Serif Lao SemCond
  * Noto Serif Lao SemCond Blk
  * Noto Serif Lao SemCond ExtBd
  * Noto Serif Lao SemCond ExtLt
  * Noto Serif Lao SemCond Light
  * Noto Serif Lao SemCond Med
  * Noto Serif Lao SemCond SemBd
  * Noto Serif Lao SemCond Thin
  * Noto Serif Lao Thin
  * Noto Serif Light
  * Noto Serif Malayalam Black
  * Noto Serif Malayalam ExtraBold
  * Noto Serif Malayalam ExtraLight
  * Noto Serif Malayalam Light
  * Noto Serif Malayalam Medium
  * Noto Serif Malayalam SemiBold
  * Noto Serif Malayalam Thin
  * Noto Serif Medium
  * Noto Serif Myanmar Blk
  * Noto Serif Myanmar Cond Blk
  * Noto Serif Myanmar Cond ExtBd
  * Noto Serif Myanmar Cond ExtLt
  * Noto Serif Myanmar Cond Med
  * Noto Serif Myanmar Cond SemBd
  * Noto Serif Myanmar Cond Thin
  * Noto Serif Myanmar Condensed
  * Noto Serif Myanmar Condensed Bold
  * Noto Serif Myanmar Condensed Light
  * Noto Serif Myanmar ExtBd
  * Noto Serif Myanmar ExtCond
  * Noto Serif Myanmar ExtCond Blk
  * Noto Serif Myanmar ExtCond ExtBd
  * Noto Serif Myanmar ExtCond ExtLt
  * Noto Serif Myanmar ExtCond Light
  * Noto Serif Myanmar ExtCond Med
  * Noto Serif Myanmar ExtCond SemBd
  * Noto Serif Myanmar ExtCond Thin
  * Noto Serif Myanmar ExtLt
  * Noto Serif Myanmar Light
  * Noto Serif Myanmar Med
  * Noto Serif Myanmar SemBd
  * Noto Serif Myanmar SemCond
  * Noto Serif Myanmar SemCond Blk
  * Noto Serif Myanmar SemCond ExtBd
  * Noto Serif Myanmar SemCond ExtLt
  * Noto Serif Myanmar SemCond Light
  * Noto Serif Myanmar SemCond Med
  * Noto Serif Myanmar SemCond SemBd
  * Noto Serif Myanmar SemCond Thin
  * Noto Serif Myanmar Thin
  * Noto Serif SemiBold
  * Noto Serif SemiCondensed
  * Noto Serif SemiCondensed Black
  * Noto Serif SemiCondensed ExtraBold
  * Noto Serif SemiCondensed ExtraLight
  * Noto Serif SemiCondensed Light
  * Noto Serif SemiCondensed Medium
  * Noto Serif SemiCondensed SemiBold
  * Noto Serif SemiCondensed Thin
  * Noto Serif Sinhala Black
  * Noto Serif Sinhala Condensed
  * Noto Serif Sinhala Condensed Black
  * Noto Serif Sinhala Condensed ExtraBold
  * Noto Serif Sinhala Condensed ExtraLight
  * Noto Serif Sinhala Condensed Light
  * Noto Serif Sinhala Condensed Medium
  * Noto Serif Sinhala Condensed SemiBold
  * Noto Serif Sinhala Condensed Thin
  * Noto Serif Sinhala ExtraBold
  * Noto Serif Sinhala ExtraCondensed
  * Noto Serif Sinhala ExtraCondensed Black
  * Noto Serif Sinhala ExtraCondensed ExtraBold
  * Noto Serif Sinhala ExtraCondensed ExtraLight
  * Noto Serif Sinhala ExtraCondensed Light
  * Noto Serif Sinhala ExtraCondensed Medium
  * Noto Serif Sinhala ExtraCondensed SemiBold
  * Noto Serif Sinhala ExtraCondensed Thin
  * Noto Serif Sinhala ExtraLight
  * Noto Serif Sinhala Light
  * Noto Serif Sinhala Medium
  * Noto Serif Sinhala SemiBold
  * Noto Serif Sinhala SemiCondensed
  * Noto Serif Sinhala SemiCondensed Black
  * Noto Serif Sinhala SemiCondensed ExtraBold
  * Noto Serif Sinhala SemiCondensed ExtraLight
  * Noto Serif Sinhala SemiCondensed Light
  * Noto Serif Sinhala SemiCondensed Medium
  * Noto Serif Sinhala SemiCondensed SemiBold
  * Noto Serif Sinhala SemiCondensed Thin
  * Noto Serif Sinhala Thin
  * Noto Serif Tamil Black
  * Noto Serif Tamil Condensed
  * Noto Serif Tamil Condensed Black
  * Noto Serif Tamil Condensed ExtraBold
  * Noto Serif Tamil Condensed ExtraLight
  * Noto Serif Tamil Condensed Light
  * Noto Serif Tamil Condensed Medium
  * Noto Serif Tamil Condensed SemiBold
  * Noto Serif Tamil Condensed Thin
  * Noto Serif Tamil ExtraBold
  * Noto Serif Tamil ExtraCondensed
  * Noto Serif Tamil ExtraCondensed Black
  * Noto Serif Tamil ExtraCondensed ExtraBold
  * Noto Serif Tamil ExtraCondensed ExtraLight
  * Noto Serif Tamil ExtraCondensed Light
  * Noto Serif Tamil ExtraCondensed Medium
  * Noto Serif Tamil ExtraCondensed SemiBold
  * Noto Serif Tamil ExtraCondensed Thin
  * Noto Serif Tamil ExtraLight
  * Noto Serif Tamil Light
  * Noto Serif Tamil Medium
  * Noto Serif Tamil SemiBold
  * Noto Serif Tamil SemiCondensed
  * Noto Serif Tamil SemiCondensed Black
  * Noto Serif Tamil SemiCondensed ExtraBold
  * Noto Serif Tamil SemiCondensed ExtraLight
  * Noto Serif Tamil SemiCondensed Light
  * Noto Serif Tamil SemiCondensed Medium
  * Noto Serif Tamil SemiCondensed SemiBold
  * Noto Serif Tamil SemiCondensed Thin
  * Noto Serif Tamil Thin
  * Noto Serif Telugu Black
  * Noto Serif Telugu ExtraBold
  * Noto Serif Telugu ExtraLight
  * Noto Serif Telugu Light
  * Noto Serif Telugu Medium
  * Noto Serif Telugu SemiBold
  * Noto Serif Telugu Thin
  * Noto Serif Thai Blk
  * Noto Serif Thai Cond
  * Noto Serif Thai Cond Blk
  * Noto Serif Thai Cond ExtBd
  * Noto Serif Thai Cond ExtLt
  * Noto Serif Thai Cond Light
  * Noto Serif Thai Cond Med
  * Noto Serif Thai Cond SemBd
  * Noto Serif Thai Cond Thin
  * Noto Serif Thai ExtBd
  * Noto Serif Thai ExtCond
  * Noto Serif Thai ExtCond Blk
  * Noto Serif Thai ExtCond ExtBd
  * Noto Serif Thai ExtCond ExtLt
  * Noto Serif Thai ExtCond Light
  * Noto Serif Thai ExtCond Med
  * Noto Serif Thai ExtCond SemBd
  * Noto Serif Thai ExtCond Thin
  * Noto Serif Thai ExtLt
  * Noto Serif Thai Light
  * Noto Serif Thai Med
  * Noto Serif Thai SemBd
  * Noto Serif Thai SemCond
  * Noto Serif Thai SemCond Blk
  * Noto Serif Thai SemCond ExtBd
  * Noto Serif Thai SemCond ExtLt
  * Noto Serif Thai SemCond Light
  * Noto Serif Thai SemCond Med
  * Noto Serif Thai SemCond SemBd
  * Noto Serif Thai SemCond Thin
  * Noto Serif Thai Thin
  * Noto Serif Thin
  * Noto Serif Tibetan Black
  * Noto Serif Tibetan ExtraBold
  * Noto Serif Tibetan ExtraLight
  * Noto Serif Tibetan Light
  * Noto Serif Tibetan Medium
  * Noto Serif Tibetan SemiBold
  * Noto Serif Tibetan Thin
  * Noto Serif Yezidi Medium
  * Noto Serif Yezidi SemiBold
  * NotoSerifTamilSlanted Black
  * NotoSerifTamilSlanted Condensed
  * NotoSerifTamilSlanted Condensed Black
  * NotoSerifTamilSlanted Condensed ExtraBold
  * NotoSerifTamilSlanted Condensed ExtraLight
  * NotoSerifTamilSlanted Condensed Light
  * NotoSerifTamilSlanted Condensed Medium
  * NotoSerifTamilSlanted Condensed SemiBold
  * NotoSerifTamilSlanted Condensed Thin
  * NotoSerifTamilSlanted ExtraBold
  * NotoSerifTamilSlanted ExtraCondensed
  * NotoSerifTamilSlanted ExtraCondensed Black
  * NotoSerifTamilSlanted ExtraCondensed ExtraBold
  * NotoSerifTamilSlanted ExtraCondensed ExtraLight
  * NotoSerifTamilSlanted ExtraCondensed Light
  * NotoSerifTamilSlanted ExtraCondensed Medium
  * NotoSerifTamilSlanted ExtraCondensed SemiBold
  * NotoSerifTamilSlanted ExtraCondensed Thin
  * NotoSerifTamilSlanted ExtraLight
  * NotoSerifTamilSlanted Light
  * NotoSerifTamilSlanted Medium
  * NotoSerifTamilSlanted SemiBold
  * NotoSerifTamilSlanted SemiCondensed
  * NotoSerifTamilSlanted SemiCondensed Black
  * NotoSerifTamilSlanted SemiCondensed ExtraBold
  * NotoSerifTamilSlanted SemiCondensed ExtraLight
  * NotoSerifTamilSlanted SemiCondensed Light
  * NotoSerifTamilSlanted SemiCondensed Medium
  * NotoSerifTamilSlanted SemiCondensed SemiBold
  * NotoSerifTamilSlanted SemiCondensed Thin
  * NotoSerifTamilSlanted Thinmisc:Depends=
 .
 The name "Noto" is short for "No Tofu",
 describing the aim of covering all living Unicode scripts
 (currently 65 are covered, at least partly.
 .
 Tofu (豆腐) is Japanese jargon
 for unicode replacement character "�" (U+FFFD)
 often displayed as replacement for unassigned or unknown characters.
Homepage: https://www.google.com/get/noto/

Package: fonts-noto-mono
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 1156
Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: fonts-noto
Version: 20201225-2
Replaces: fonts-noto-core (<< 20201027-2~), fonts-noto-unhinted (<< 20201027-3~)
Breaks: fonts-noto-core (<< 20201027-2~), fonts-noto-unhinted (<< 20201027-3~)
Enhances: fonts-noto-core
Conffiles:
 /etc/fonts/conf.avail/30-droid-noto-mono.conf 3637d988826c19a1859d29b79ee01e87
Description: "No Tofu" monospaced font family with large Unicode coverage
 Noto is a collection of font families,
 each visually harmonized across scripts.
 .
 This package contains Noto Mono font family
 (formerly known as Droid Mono),
 and core weights for the Noto Sans Mono font family.
 Beware that Noto Mono has a much smaller repertoire
 than Noto Sans or Noto Serif.
 .
 The name "Noto" is short for "No Tofu",
 describing the aim of covering all living Unicode scripts.
 .
 Tofu (豆腐) is Japanese jargon
 for unicode replacement character "�" (U+FFFD)
 often displayed as replacement for unassigned or unknown characters.
Homepage: https://www.google.com/get/noto/

Package: fonts-noto-ui-core
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 5060
Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: fonts-noto
Version: 20201225-2
Replaces: fonts-noto (<< 2015-05-11+cjk-1~), fonts-noto-hinted (<< 20181130-2~), fonts-noto-unhinted (<< 20181227-2~)
Suggests: fonts-noto-core
Breaks: fonts-noto (<< 2015-05-11+cjk-1~), fonts-noto-hinted (<< 20181130-2~), fonts-noto-unhinted (<< 20181227-2~)
Description: "No Tofu" font families with large Unicode coverage (UI core)
 Noto is a collection of font families,
 each visually harmonized across scripts.
 .
 This package contains core weights for these Noto UI font families:
 .
  * Noto Looped Lao UI Bold
  * Noto Looped Lao UI Regular
  * Noto Looped Thai UI Bold
  * Noto Looped Thai UI Regular
  * Noto Naskh Arabic UI
  * Noto Sans Arabic UI
  * Noto Sans Bengali UI
  * Noto Sans Devanagari UI
  * Noto Sans Gujarati UI
  * Noto Sans Gurmukhi UI
  * Noto Sans Kannada UI
  * Noto Sans Khmer UI
  * Noto Sans Lao UI
  * Noto Sans Malayalam UI
  * Noto Sans Myanmar UI
  * Noto Sans Oriya UI
  * Noto Sans Sinhala UI
  * Noto Sans Tamil UI
  * Noto Sans Telugu UI
  * Noto Sans Thai UImisc:Depends=
 .
 Noto UI fonts are for text display in UI elements
 (e.g. buttons, menus) that have a height limit.
 .
 The name "Noto" is short for "No Tofu",
 describing the aim of covering all living Unicode scripts.
 .
 Tofu (豆腐) is Japanese jargon
 for unicode replacement character "�" (U+FFFD)
 often displayed as replacement for unassigned or unknown characters.
Homepage: https://www.google.com/get/noto/

Package: fonts-noto-ui-extra
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 72046
Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: fonts-noto
Version: 20201225-2
Replaces: fonts-noto-unhinted (<< 20201027-1~)
Suggests: fonts-noto-extra
Breaks: fonts-noto-unhinted (<< 20201027-1~)
Enhances: fonts-noto-ui-core
Description: "No Tofu" font families with large Unicode coverage (UI extra)
 Noto is a collection of font families,
 each visually harmonized across scripts.
 .
 This package contains extra weights for these Noto UI font families:
 .
  * Noto Looped Lao UI Black
  * Noto Looped Lao UI Cond Blk
  * Noto Looped Lao UI Cond Bold
  * Noto Looped Lao UI Cond ExBd
  * Noto Looped Lao UI Cond ExLt
  * Noto Looped Lao UI Cond Lt
  * Noto Looped Lao UI Cond Med
  * Noto Looped Lao UI Cond SmBd
  * Noto Looped Lao UI Cond Thin
  * Noto Looped Lao UI Condensed
  * Noto Looped Lao UI ExCd Blk
  * Noto Looped Lao UI ExCd Bold
  * Noto Looped Lao UI ExCd ExBd
  * Noto Looped Lao UI ExCd ExLt
  * Noto Looped Lao UI ExCd Lt
  * Noto Looped Lao UI ExCd Med
  * Noto Looped Lao UI ExCd SmBd
  * Noto Looped Lao UI ExCd Thin
  * Noto Looped Lao UI ExtLight
  * Noto Looped Lao UI ExtraBold
  * Noto Looped Lao UI ExtraCond
  * Noto Looped Lao UI Light
  * Noto Looped Lao UI Medium
  * Noto Looped Lao UI SemiBold
  * Noto Looped Lao UI SemiCond
  * Noto Looped Lao UI SmCd Blk
  * Noto Looped Lao UI SmCd Bold
  * Noto Looped Lao UI SmCd ExBd
  * Noto Looped Lao UI SmCd ExtLt
  * Noto Looped Lao UI SmCd Lt
  * Noto Looped Lao UI SmCd Med
  * Noto Looped Lao UI SmCd SmBd
  * Noto Looped Lao UI SmCd Thin
  * Noto Looped Lao UI Thin
  * Noto Looped Thai UI Black
  * Noto Looped Thai UI Cond Blk
  * Noto Looped Thai UI Cond Bold
  * Noto Looped Thai UI Cond ExBd
  * Noto Looped Thai UI Cond ExLt
  * Noto Looped Thai UI Cond Lt
  * Noto Looped Thai UI Cond Med
  * Noto Looped Thai UI Cond SmBd
  * Noto Looped Thai UI Cond Thin
  * Noto Looped Thai UI Condensed
  * Noto Looped Thai UI ExCd Blk
  * Noto Looped Thai UI ExCd Bold
  * Noto Looped Thai UI ExCd ExBd
  * Noto Looped Thai UI ExCd ExLt
  * Noto Looped Thai UI ExCd Lt
  * Noto Looped Thai UI ExCd Med
  * Noto Looped Thai UI ExCd SmBd
  * Noto Looped Thai UI ExCd Thin
  * Noto Looped Thai UI ExtLight
  * Noto Looped Thai UI ExtraBold
  * Noto Looped Thai UI ExtraCond
  * Noto Looped Thai UI Light
  * Noto Looped Thai UI Medium
  * Noto Looped Thai UI SemiBold
  * Noto Looped Thai UI SemiCond
  * Noto Looped Thai UI SmCd Blk
  * Noto Looped Thai UI SmCd Bold
  * Noto Looped Thai UI SmCd ExBd
  * Noto Looped Thai UI SmCd ExLt
  * Noto Looped Thai UI SmCd Lt
  * Noto Looped Thai UI SmCd Med
  * Noto Looped Thai UI SmCd SmBd
  * Noto Looped Thai UI SmCd Thin
  * Noto Looped Thai UI Thin
  * Noto Naskh Arabic UI Medium
  * Noto Naskh Arabic UI Semi Bold
  * Noto Sans Arabic UI Bk
  * Noto Sans Arabic UI Cn
  * Noto Sans Arabic UI Cn Bk
  * Noto Sans Arabic UI Cn Lt
  * Noto Sans Arabic UI Cn Md
  * Noto Sans Arabic UI Cn SmBd
  * Noto Sans Arabic UI Cn Th
  * Noto Sans Arabic UI Cn XBd
  * Noto Sans Arabic UI Cn XLt
  * Noto Sans Arabic UI Lt
  * Noto Sans Arabic UI Md
  * Noto Sans Arabic UI SmBd
  * Noto Sans Arabic UI SmCn
  * Noto Sans Arabic UI SmCn Bk
  * Noto Sans Arabic UI SmCn Lt
  * Noto Sans Arabic UI SmCn Md
  * Noto Sans Arabic UI SmCn SmBd
  * Noto Sans Arabic UI SmCn Th
  * Noto Sans Arabic UI SmCn XBd
  * Noto Sans Arabic UI SmCn XLt
  * Noto Sans Arabic UI Th
  * Noto Sans Arabic UI XBd
  * Noto Sans Arabic UI XCn
  * Noto Sans Arabic UI XCn Bk
  * Noto Sans Arabic UI XCn Lt
  * Noto Sans Arabic UI XCn Md
  * Noto Sans Arabic UI XCn SmBd
  * Noto Sans Arabic UI XCn Th
  * Noto Sans Arabic UI XCn XBd
  * Noto Sans Arabic UI XCn XLt
  * Noto Sans Arabic UI XLt
  * Noto Sans Bengali UI Black
  * Noto Sans Bengali UI Condensed
  * Noto Sans Bengali UI ExtraBold
  * Noto Sans Bengali UI ExtraCondensed
  * Noto Sans Bengali UI ExtraLight
  * Noto Sans Bengali UI Light
  * Noto Sans Bengali UI Medium
  * Noto Sans Bengali UI SemiBold
  * Noto Sans Bengali UI SemiCondensed
  * Noto Sans Bengali UI Thin
  * Noto Sans Devanagari UI Black
  * Noto Sans Devanagari UI Condensed
  * Noto Sans Devanagari UI Condensed Black
  * Noto Sans Devanagari UI Condensed ExtraBold
  * Noto Sans Devanagari UI Condensed ExtraLight
  * Noto Sans Devanagari UI Condensed Light
  * Noto Sans Devanagari UI Condensed Medium
  * Noto Sans Devanagari UI Condensed SemiBold
  * Noto Sans Devanagari UI Condensed Thin
  * Noto Sans Devanagari UI ExtraBold
  * Noto Sans Devanagari UI ExtraCondensed
  * Noto Sans Devanagari UI ExtraCondensed Black
  * Noto Sans Devanagari UI ExtraCondensed ExtraBold
  * Noto Sans Devanagari UI ExtraCondensed ExtraLight
  * Noto Sans Devanagari UI ExtraCondensed Light
  * Noto Sans Devanagari UI ExtraCondensed Medium
  * Noto Sans Devanagari UI ExtraCondensed SemiBold
  * Noto Sans Devanagari UI ExtraCondensed Thin
  * Noto Sans Devanagari UI ExtraLight
  * Noto Sans Devanagari UI Light
  * Noto Sans Devanagari UI Medium
  * Noto Sans Devanagari UI SemiBold
  * Noto Sans Devanagari UI SemiCondensed
  * Noto Sans Devanagari UI SemiCondensed Black
  * Noto Sans Devanagari UI SemiCondensed ExtraBold
  * Noto Sans Devanagari UI SemiCondensed ExtraLight
  * Noto Sans Devanagari UI SemiCondensed Light
  * Noto Sans Devanagari UI SemiCondensed Medium
  * Noto Sans Devanagari UI SemiCondensed SemiBold
  * Noto Sans Devanagari UI SemiCondensed Thin
  * Noto Sans Devanagari UI Thin
  * Noto Sans Gujarati UI Black
  * Noto Sans Gujarati UI Condensed
  * Noto Sans Gujarati UI Condensed Black
  * Noto Sans Gujarati UI Condensed ExtraBold
  * Noto Sans Gujarati UI Condensed ExtraLight
  * Noto Sans Gujarati UI Condensed Light
  * Noto Sans Gujarati UI Condensed Medium
  * Noto Sans Gujarati UI Condensed SemiBold
  * Noto Sans Gujarati UI Condensed Thin
  * Noto Sans Gujarati UI ExtraBold
  * Noto Sans Gujarati UI ExtraCondensed
  * Noto Sans Gujarati UI ExtraCondensed Black
  * Noto Sans Gujarati UI ExtraCondensed ExtraBold
  * Noto Sans Gujarati UI ExtraCondensed ExtraLight
  * Noto Sans Gujarati UI ExtraCondensed Light
  * Noto Sans Gujarati UI ExtraCondensed Medium
  * Noto Sans Gujarati UI ExtraCondensed SemiBold
  * Noto Sans Gujarati UI ExtraCondensed Thin
  * Noto Sans Gujarati UI ExtraLight
  * Noto Sans Gujarati UI Light
  * Noto Sans Gujarati UI Medium
  * Noto Sans Gujarati UI SemiBold
  * Noto Sans Gujarati UI SemiCondensed
  * Noto Sans Gujarati UI SemiCondensed Black
  * Noto Sans Gujarati UI SemiCondensed ExtraBold
  * Noto Sans Gujarati UI SemiCondensed ExtraLight
  * Noto Sans Gujarati UI SemiCondensed Light
  * Noto Sans Gujarati UI SemiCondensed Medium
  * Noto Sans Gujarati UI SemiCondensed SemiBold
  * Noto Sans Gujarati UI SemiCondensed Thin
  * Noto Sans Gujarati UI Thin
  * Noto Sans Gurmukhi UI Black
  * Noto Sans Gurmukhi UI Condensed
  * Noto Sans Gurmukhi UI Condensed Black
  * Noto Sans Gurmukhi UI Condensed ExtraBold
  * Noto Sans Gurmukhi UI Condensed ExtraLight
  * Noto Sans Gurmukhi UI Condensed Light
  * Noto Sans Gurmukhi UI Condensed Medium
  * Noto Sans Gurmukhi UI Condensed SemiBold
  * Noto Sans Gurmukhi UI Condensed Thin
  * Noto Sans Gurmukhi UI ExtraBold
  * Noto Sans Gurmukhi UI ExtraCondensed
  * Noto Sans Gurmukhi UI ExtraCondensed Black
  * Noto Sans Gurmukhi UI ExtraCondensed ExtraBold
  * Noto Sans Gurmukhi UI ExtraCondensed ExtraLight
  * Noto Sans Gurmukhi UI ExtraCondensed Light
  * Noto Sans Gurmukhi UI ExtraCondensed Medium
  * Noto Sans Gurmukhi UI ExtraCondensed SemiBold
  * Noto Sans Gurmukhi UI ExtraCondensed Thin
  * Noto Sans Gurmukhi UI ExtraLight
  * Noto Sans Gurmukhi UI Light
  * Noto Sans Gurmukhi UI Medium
  * Noto Sans Gurmukhi UI SemiBold
  * Noto Sans Gurmukhi UI SemiCondensed
  * Noto Sans Gurmukhi UI SemiCondensed Black
  * Noto Sans Gurmukhi UI SemiCondensed ExtraBold
  * Noto Sans Gurmukhi UI SemiCondensed ExtraLight
  * Noto Sans Gurmukhi UI SemiCondensed Light
  * Noto Sans Gurmukhi UI SemiCondensed Medium
  * Noto Sans Gurmukhi UI SemiCondensed SemiBold
  * Noto Sans Gurmukhi UI SemiCondensed Thin
  * Noto Sans Gurmukhi UI Thin
  * Noto Sans Kannada UI Black
  * Noto Sans Kannada UI Condensed
  * Noto Sans Kannada UI Condensed Black
  * Noto Sans Kannada UI Condensed ExtraBold
  * Noto Sans Kannada UI Condensed ExtraLight
  * Noto Sans Kannada UI Condensed Light
  * Noto Sans Kannada UI Condensed Medium
  * Noto Sans Kannada UI Condensed SemiBold
  * Noto Sans Kannada UI Condensed Thin
  * Noto Sans Kannada UI ExtraBold
  * Noto Sans Kannada UI ExtraCondensed
  * Noto Sans Kannada UI ExtraCondensed Black
  * Noto Sans Kannada UI ExtraCondensed ExtraBold
  * Noto Sans Kannada UI ExtraCondensed ExtraLight
  * Noto Sans Kannada UI ExtraCondensed Light
  * Noto Sans Kannada UI ExtraCondensed Medium
  * Noto Sans Kannada UI ExtraCondensed SemiBold
  * Noto Sans Kannada UI ExtraCondensed Thin
  * Noto Sans Kannada UI ExtraLight
  * Noto Sans Kannada UI Light
  * Noto Sans Kannada UI Medium
  * Noto Sans Kannada UI SemiBold
  * Noto Sans Kannada UI SemiCondensed
  * Noto Sans Kannada UI SemiCondensed Black
  * Noto Sans Kannada UI SemiCondensed ExtraBold
  * Noto Sans Kannada UI SemiCondensed ExtraLight
  * Noto Sans Kannada UI SemiCondensed Light
  * Noto Sans Kannada UI SemiCondensed Medium
  * Noto Sans Kannada UI SemiCondensed SemiBold
  * Noto Sans Kannada UI SemiCondensed Thin
  * Noto Sans Kannada UI Thin
  * Noto Sans Khmer UI Black
  * Noto Sans Khmer UI Condensed
  * Noto Sans Khmer UI Condensed Black
  * Noto Sans Khmer UI Condensed ExtraBold
  * Noto Sans Khmer UI Condensed ExtraLight
  * Noto Sans Khmer UI Condensed Light
  * Noto Sans Khmer UI Condensed Medium
  * Noto Sans Khmer UI Condensed SemiBold
  * Noto Sans Khmer UI Condensed Thin
  * Noto Sans Khmer UI ExtraBold
  * Noto Sans Khmer UI ExtraCondensed
  * Noto Sans Khmer UI ExtraCondensed Black
  * Noto Sans Khmer UI ExtraCondensed ExtraBold
  * Noto Sans Khmer UI ExtraCondensed ExtraLight
  * Noto Sans Khmer UI ExtraCondensed Light
  * Noto Sans Khmer UI ExtraCondensed Medium
  * Noto Sans Khmer UI ExtraCondensed SemiBold
  * Noto Sans Khmer UI ExtraCondensed Thin
  * Noto Sans Khmer UI ExtraLight
  * Noto Sans Khmer UI Light
  * Noto Sans Khmer UI Medium
  * Noto Sans Khmer UI SemiBold
  * Noto Sans Khmer UI SemiCondensed
  * Noto Sans Khmer UI SemiCondensed Black
  * Noto Sans Khmer UI SemiCondensed ExtraBold
  * Noto Sans Khmer UI SemiCondensed ExtraLight
  * Noto Sans Khmer UI SemiCondensed Light
  * Noto Sans Khmer UI SemiCondensed Medium
  * Noto Sans Khmer UI SemiCondensed SemiBold
  * Noto Sans Khmer UI SemiCondensed Thin
  * Noto Sans Khmer UI Thin
  * Noto Sans Lao UI Blk
  * Noto Sans Lao UI Cond
  * Noto Sans Lao UI Cond Blk
  * Noto Sans Lao UI Cond ExtBd
  * Noto Sans Lao UI Cond ExtLt
  * Noto Sans Lao UI Cond Light
  * Noto Sans Lao UI Cond Med
  * Noto Sans Lao UI Cond SemBd
  * Noto Sans Lao UI Cond Thin
  * Noto Sans Lao UI ExtBd
  * Noto Sans Lao UI ExtCond
  * Noto Sans Lao UI ExtCond Blk
  * Noto Sans Lao UI ExtCond ExtBd
  * Noto Sans Lao UI ExtCond ExtLt
  * Noto Sans Lao UI ExtCond Light
  * Noto Sans Lao UI ExtCond Med
  * Noto Sans Lao UI ExtCond SemBd
  * Noto Sans Lao UI ExtCond Thin
  * Noto Sans Lao UI ExtLt
  * Noto Sans Lao UI Light
  * Noto Sans Lao UI Med
  * Noto Sans Lao UI SemBd
  * Noto Sans Lao UI SemCond
  * Noto Sans Lao UI SemCond Blk
  * Noto Sans Lao UI SemCond ExtBd
  * Noto Sans Lao UI SemCond ExtLt
  * Noto Sans Lao UI SemCond Light
  * Noto Sans Lao UI SemCond Med
  * Noto Sans Lao UI SemCond SemBd
  * Noto Sans Lao UI SemCond Thin
  * Noto Sans Lao UI Thin
  * Noto Sans Malayalam UI Black
  * Noto Sans Malayalam UI Condensed
  * Noto Sans Malayalam UI Condensed Black
  * Noto Sans Malayalam UI Condensed ExtraBold
  * Noto Sans Malayalam UI Condensed ExtraLight
  * Noto Sans Malayalam UI Condensed Light
  * Noto Sans Malayalam UI Condensed Medium
  * Noto Sans Malayalam UI Condensed SemiBold
  * Noto Sans Malayalam UI Condensed Thin
  * Noto Sans Malayalam UI ExtraBold
  * Noto Sans Malayalam UI ExtraCondensed
  * Noto Sans Malayalam UI ExtraCondensed Black
  * Noto Sans Malayalam UI ExtraCondensed ExtraBold
  * Noto Sans Malayalam UI ExtraCondensed ExtraLight
  * Noto Sans Malayalam UI ExtraCondensed Light
  * Noto Sans Malayalam UI ExtraCondensed Medium
  * Noto Sans Malayalam UI ExtraCondensed SemiBold
  * Noto Sans Malayalam UI ExtraCondensed Thin
  * Noto Sans Malayalam UI ExtraLight
  * Noto Sans Malayalam UI Light
  * Noto Sans Malayalam UI Medium
  * Noto Sans Malayalam UI SemiBold
  * Noto Sans Malayalam UI SemiCondensed
  * Noto Sans Malayalam UI SemiCondensed Black
  * Noto Sans Malayalam UI SemiCondensed ExtraBold
  * Noto Sans Malayalam UI SemiCondensed ExtraLight
  * Noto Sans Malayalam UI SemiCondensed Light
  * Noto Sans Malayalam UI SemiCondensed Medium
  * Noto Sans Malayalam UI SemiCondensed SemiBold
  * Noto Sans Malayalam UI SemiCondensed Thin
  * Noto Sans Malayalam UI Thin
  * Noto Sans Myanmar UI Black
  * Noto Sans Myanmar UI Condensed
  * Noto Sans Myanmar UI Condensed Black
  * Noto Sans Myanmar UI Condensed ExtraBold
  * Noto Sans Myanmar UI Condensed ExtraLight
  * Noto Sans Myanmar UI Condensed Light
  * Noto Sans Myanmar UI Condensed Medium
  * Noto Sans Myanmar UI Condensed SemiBold
  * Noto Sans Myanmar UI Condensed Thin
  * Noto Sans Myanmar UI ExtraBold
  * Noto Sans Myanmar UI ExtraCondensed
  * Noto Sans Myanmar UI ExtraCondensed Black
  * Noto Sans Myanmar UI ExtraCondensed ExtraBold
  * Noto Sans Myanmar UI ExtraCondensed ExtraLight
  * Noto Sans Myanmar UI ExtraCondensed Light
  * Noto Sans Myanmar UI ExtraCondensed Medium
  * Noto Sans Myanmar UI ExtraCondensed SemiBold
  * Noto Sans Myanmar UI ExtraCondensed Thin
  * Noto Sans Myanmar UI ExtraLight
  * Noto Sans Myanmar UI Light
  * Noto Sans Myanmar UI Medium
  * Noto Sans Myanmar UI SemiBold
  * Noto Sans Myanmar UI SemiCondensed
  * Noto Sans Myanmar UI SemiCondensed Black
  * Noto Sans Myanmar UI SemiCondensed ExtraBold
  * Noto Sans Myanmar UI SemiCondensed ExtraLight
  * Noto Sans Myanmar UI SemiCondensed Light
  * Noto Sans Myanmar UI SemiCondensed Medium
  * Noto Sans Myanmar UI SemiCondensed SemiBold
  * Noto Sans Myanmar UI SemiCondensed Thin
  * Noto Sans Myanmar UI Thin
  * Noto Sans Oriya UI Blk
  * Noto Sans Oriya UI Cond
  * Noto Sans Oriya UI Cond Blk
  * Noto Sans Oriya UI Cond Bold
  * Noto Sans Oriya UI Cond Thin
  * Noto Sans Oriya UI ExtCond
  * Noto Sans Oriya UI ExtCond Blk
  * Noto Sans Oriya UI ExtCond Bold
  * Noto Sans Oriya UI ExtCond Thin
  * Noto Sans Oriya UI Thin
  * Noto Sans Sinhala UI Black
  * Noto Sans Sinhala UI Condensed
  * Noto Sans Sinhala UI Condensed Black
  * Noto Sans Sinhala UI Condensed ExtraBold
  * Noto Sans Sinhala UI Condensed ExtraLight
  * Noto Sans Sinhala UI Condensed Light
  * Noto Sans Sinhala UI Condensed Medium
  * Noto Sans Sinhala UI Condensed SemiBold
  * Noto Sans Sinhala UI Condensed Thin
  * Noto Sans Sinhala UI ExtraBold
  * Noto Sans Sinhala UI ExtraCondensed
  * Noto Sans Sinhala UI ExtraCondensed Black
  * Noto Sans Sinhala UI ExtraCondensed ExtraBold
  * Noto Sans Sinhala UI ExtraCondensed ExtraLight
  * Noto Sans Sinhala UI ExtraCondensed Light
  * Noto Sans Sinhala UI ExtraCondensed Medium
  * Noto Sans Sinhala UI ExtraCondensed SemiBold
  * Noto Sans Sinhala UI ExtraCondensed Thin
  * Noto Sans Sinhala UI ExtraLight
  * Noto Sans Sinhala UI Light
  * Noto Sans Sinhala UI Medium
  * Noto Sans Sinhala UI SemiBold
  * Noto Sans Sinhala UI SemiCondensed
  * Noto Sans Sinhala UI SemiCondensed Black
  * Noto Sans Sinhala UI SemiCondensed ExtraBold
  * Noto Sans Sinhala UI SemiCondensed ExtraLight
  * Noto Sans Sinhala UI SemiCondensed Light
  * Noto Sans Sinhala UI SemiCondensed Medium
  * Noto Sans Sinhala UI SemiCondensed SemiBold
  * Noto Sans Sinhala UI SemiCondensed Thin
  * Noto Sans Sinhala UI Thin
  * Noto Sans Tamil UI Black
  * Noto Sans Tamil UI Condensed
  * Noto Sans Tamil UI Condensed Black
  * Noto Sans Tamil UI Condensed ExtraBold
  * Noto Sans Tamil UI Condensed ExtraLight
  * Noto Sans Tamil UI Condensed Light
  * Noto Sans Tamil UI Condensed Medium
  * Noto Sans Tamil UI Condensed SemiBold
  * Noto Sans Tamil UI Condensed Thin
  * Noto Sans Tamil UI ExtraBold
  * Noto Sans Tamil UI ExtraCondensed
  * Noto Sans Tamil UI ExtraCondensed Black
  * Noto Sans Tamil UI ExtraCondensed ExtraBold
  * Noto Sans Tamil UI ExtraCondensed ExtraLight
  * Noto Sans Tamil UI ExtraCondensed Light
  * Noto Sans Tamil UI ExtraCondensed Medium
  * Noto Sans Tamil UI ExtraCondensed SemiBold
  * Noto Sans Tamil UI ExtraCondensed Thin
  * Noto Sans Tamil UI ExtraLight
  * Noto Sans Tamil UI Light
  * Noto Sans Tamil UI Medium
  * Noto Sans Tamil UI SemiBold
  * Noto Sans Tamil UI SemiCondensed
  * Noto Sans Tamil UI SemiCondensed Black
  * Noto Sans Tamil UI SemiCondensed ExtraBold
  * Noto Sans Tamil UI SemiCondensed ExtraLight
  * Noto Sans Tamil UI SemiCondensed Light
  * Noto Sans Tamil UI SemiCondensed Medium
  * Noto Sans Tamil UI SemiCondensed SemiBold
  * Noto Sans Tamil UI SemiCondensed Thin
  * Noto Sans Tamil UI Thin
  * Noto Sans Telugu UI Black
  * Noto Sans Telugu UI Condensed
  * Noto Sans Telugu UI Condensed Black
  * Noto Sans Telugu UI Condensed ExtraBold
  * Noto Sans Telugu UI Condensed ExtraLight
  * Noto Sans Telugu UI Condensed Light
  * Noto Sans Telugu UI Condensed Medium
  * Noto Sans Telugu UI Condensed SemiBold
  * Noto Sans Telugu UI Condensed Thin
  * Noto Sans Telugu UI ExtraBold
  * Noto Sans Telugu UI ExtraCondensed
  * Noto Sans Telugu UI ExtraCondensed Black
  * Noto Sans Telugu UI ExtraCondensed ExtraBold
  * Noto Sans Telugu UI ExtraCondensed ExtraLight
  * Noto Sans Telugu UI ExtraCondensed Light
  * Noto Sans Telugu UI ExtraCondensed Medium
  * Noto Sans Telugu UI ExtraCondensed SemiBold
  * Noto Sans Telugu UI ExtraCondensed Thin
  * Noto Sans Telugu UI ExtraLight
  * Noto Sans Telugu UI Light
  * Noto Sans Telugu UI Medium
  * Noto Sans Telugu UI SemiBold
  * Noto Sans Telugu UI SemiCondensed
  * Noto Sans Telugu UI SemiCondensed Black
  * Noto Sans Telugu UI SemiCondensed ExtraBold
  * Noto Sans Telugu UI SemiCondensed ExtraLight
  * Noto Sans Telugu UI SemiCondensed Light
  * Noto Sans Telugu UI SemiCondensed Medium
  * Noto Sans Telugu UI SemiCondensed SemiBold
  * Noto Sans Telugu UI SemiCondensed Thin
  * Noto Sans Telugu UI Thin
  * Noto Sans Thai UI Blk
  * Noto Sans Thai UI Cond
  * Noto Sans Thai UI Cond Blk
  * Noto Sans Thai UI Cond ExtBd
  * Noto Sans Thai UI Cond ExtLt
  * Noto Sans Thai UI Cond Light
  * Noto Sans Thai UI Cond Med
  * Noto Sans Thai UI Cond SemBd
  * Noto Sans Thai UI Cond Thin
  * Noto Sans Thai UI ExtBd
  * Noto Sans Thai UI ExtCond
  * Noto Sans Thai UI ExtCond Blk
  * Noto Sans Thai UI ExtCond ExtBd
  * Noto Sans Thai UI ExtCond ExtLt
  * Noto Sans Thai UI ExtCond Light
  * Noto Sans Thai UI ExtCond Med
  * Noto Sans Thai UI ExtCond SemBd
  * Noto Sans Thai UI ExtCond Thin
  * Noto Sans Thai UI ExtLt
  * Noto Sans Thai UI Light
  * Noto Sans Thai UI Med
  * Noto Sans Thai UI SemBd
  * Noto Sans Thai UI SemCond
  * Noto Sans Thai UI SemCond Blk
  * Noto Sans Thai UI SemCond ExtBd
  * Noto Sans Thai UI SemCond ExtLt
  * Noto Sans Thai UI SemCond Light
  * Noto Sans Thai UI SemCond Med
  * Noto Sans Thai UI SemCond SemBd
  * Noto Sans Thai UI SemCond Thin
  * Noto Sans Thai UI Thinmisc:Depends=
 .
 Noto UI fonts are for text display in UI elements
 (e.g. buttons, menus) that have a height limit.
 .
 The name "Noto" is short for "No Tofu",
 describing the aim of covering all living Unicode scripts.
 .
 Tofu (豆腐) is Japanese jargon
 for unicode replacement character "�" (U+FFFD)
 often displayed as replacement for unassigned or unknown characters.
Homepage: https://www.google.com/get/noto/

Package: fonts-noto-unhinted
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 31
Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: fonts-noto
Version: 20201225-2
Enhances: fonts-croscore, fonts-noto-core, fonts-noto-extra, fonts-noto-mono
Description: "No Tofu" font families with large Unicode coverage (unhinted)
 Noto is a collection of font families,
 each visually harmonized across scripts.
 .
 This package contains Noto font families which lacks hinting:
 .
 [ currently this package is empty: all Noto families has hinting ]
 .
 The name "Noto" is short for "No Tofu",
 describing the aim of covering all living Unicode scripts
 (currently 65 are covered, at least partly.
 .
 Tofu (豆腐) is Japanese jargon
 for unicode replacement character "�" (U+FFFD)
 often displayed as replacement for unassigned or unknown characters.
Homepage: https://www.google.com/get/noto/

Package: fonts-ubuntu
Status: install ok installed
Priority: optional
Section: non-free/fonts
Installed-Size: 4339
Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.83-6
Description: sans-serif font set from Ubuntu
 The Ubuntu Font Family is a set of contemporary sans-serif fonts developed
 between 2010-2011. Dalton Maag performed the font design work and
 implementation with funding from Canonical. The fonts have been the default
 fonts for Ubuntu since 2010.
Homepage: https://design.ubuntu.com/font/

Package: fonts-urw-base35
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 15560
Maintainer: Debian Fonts Task Force <debian-fonts@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 20200910-8
Replaces: gsfonts (<< 2:20200910-2~), gsfonts-x11 (<< 2:20200910-2~)
Depends: xfonts-utils
Suggests: fonts-freefont-otf | fonts-freefont-ttf, fonts-texgyre
Breaks: gsfonts (<< 2:20200910-2~), gsfonts-x11 (<< 2:20200910-2~)
Conffiles:
 /etc/X11/fonts/Type1/fonts-urw-base35.alias 32ee9a005b7c7a089bdd5a5c4ee19c89
 /etc/X11/fonts/Type1/fonts-urw-base35.scale 1027533ffa7574e6b30b528d72287445
 /etc/ghostscript/fontmap.d/10fonts-urw-base35.conf a97fb8d980202e59cc253c9c21bb2d30
Description: font set metric-compatible with the 35 PostScript Level 2 Base Fonts
 A commercial-quality set of PostScript Type 1 fonts, metric-compatible
 with the 35 PostScript Language Level 2 Base Fonts. This package contains
 outlines in .t1 format and metrics in .afm format of the following fonts:
 .
  C059
  D050000L
  Nimbus Mono PS
  Nimbus Roman
  Nimbus Sans
  Nimbus Sans Narrow
  P052
  Standard Symbols PS
  URW Bookman
  URW Gothic
  Z003
 .
 This package also makes the fonts available to an X server under both
 their "urw" names and via fonts.alias under the official "adobe" names.
 .
 Extensive remakes of these fonts in the OpenType format are available in the
 GUST TeX Gyre collection in the fonts-texgyre package. The Cyrillic glyphs
 added to the now obsolete urwcyr fork of these fonts have been merged into
 the GNU FreeFont collection available in the fonts-freefont-otf or
 fonts-freefont-ttf packages.
Homepage: https://github.com/ArtifexSoftware/urw-base35-fonts

Package: fuse3
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 109
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Version: 3.17.2-3
Provides: fuse (= 3.17.2-3)
Depends: libc6 (>= 2.38), libfuse3-4 (= 3.17.2-3), adduser, mount (>= 2.19.1), sed (>= 4)
Conflicts: fuse (<< 3.17.2-3)
Conffiles:
 /etc/fuse.conf 5df72dde927a769eb88afe8e3458ac3f
Description: Filesystem in Userspace (3.x version)
 Filesystem in Userspace (FUSE) is a simple interface for userspace programs to
 export a virtual filesystem to the Linux kernel. It also aims to provide a
 secure method for non privileged users to create and mount their own filesystem
 implementations.
Homepage: https://github.com/libfuse/libfuse/wiki

Package: g++
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 13
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Source: gcc-defaults (1.220)
Version: 4:14.2.0-1
Provides: c++-compiler
Depends: cpp (= 4:14.2.0-1), cpp-x86-64-linux-gnu (= 4:14.2.0-1), gcc (= 4:14.2.0-1), g++-14 (>= 14.2.0-6~), g++-x86-64-linux-gnu (= 4:14.2.0-1), gcc-14 (>= 14.2.0-6~)
Suggests: g++-multilib
Description: GNU C++ compiler
 This is the GNU C++ compiler, a fairly portable optimizing compiler for C++.
 .
 This is a dependency package providing the default GNU C++ compiler.

Package: g++-12
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 36698
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Source: gcc-12
Version: 12.4.0-5
Provides: c++-compiler, c++abi2-dev
Depends: gcc-12-base (= 12.4.0-5), gcc-12 (= 12.4.0-5), libstdc++-12-dev (= 12.4.0-5), libc6 (>= 2.38), libgmp10 (>= 2:6.3.0+dfsg), libisl23 (>= 0.15), libmpc3 (>= 1.1.0), libmpfr6 (>= 3.1.3), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4)
Suggests: g++-12-multilib, gcc-12-doc (>= 12)
Description: GNU C++ compiler
 This is the GNU C++ compiler, a fairly portable optimizing compiler for C++.
Homepage: http://gcc.gnu.org/

Package: g++-14
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 35
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Source: gcc-14
Version: 14.2.0-19
Provides: c++-compiler, c++abi2-dev
Depends: g++-14-x86-64-linux-gnu (= 14.2.0-19), gcc-14-base (= 14.2.0-19), gcc-14 (= 14.2.0-19)
Suggests: g++-14-multilib, gcc-14-doc (>= 14)
Description: GNU C++ compiler
 This is the GNU C++ compiler, a fairly portable optimizing compiler for C++.
Homepage: http://gcc.gnu.org/

Package: g++-14-x86-64-linux-gnu
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 36931
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gcc-14
Version: 14.2.0-19
Provides: c++-compiler-x86-64-linux-gnu
Depends: gcc-14-base (= 14.2.0-19), gcc-14-x86-64-linux-gnu (= 14.2.0-19), libstdc++-14-dev (= 14.2.0-19), libc6 (>= 2.38), libgmp10 (>= 2:6.3.0+dfsg), libisl23 (>= 0.15), libmpc3 (>= 1.1.0), libmpfr6 (>= 3.1.3), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.2.2)
Suggests: gcc-14-doc (>= 14)
Description: GNU C++ compiler for x86_64-linux-gnu architecture
 This is the GNU C++ compiler, a fairly portable optimizing compiler for C++.
 .
 This package contains C++ cross-compiler for x86_64-linux-gnu architecture.
Homepage: http://gcc.gnu.org/

Package: g++-x86-64-linux-gnu
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 11
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gcc-defaults (1.220)
Version: 4:14.2.0-1
Replaces: g++ (<< 4:13.2.0-3)
Depends: cpp-x86-64-linux-gnu (= 4:14.2.0-1), gcc-x86-64-linux-gnu (= 4:14.2.0-1), g++-14-x86-64-linux-gnu (>= 14.2.0-6~)
Breaks: g++ (<< 4:13.2.0-3)
Description: GNU C++ compiler for the amd64 architecture
 This is the GNU C++ compiler, a fairly portable optimizing compiler for C++.
 .
 This is a dependency package providing the default GNU C++ cross-compiler
 for the amd64 architecture.

Package: galera-4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2642
Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Architecture: amd64
Version: 26.4.23-0+deb13u1
Replaces: galera-3 (<< 26.4)
Provides: galera4, percona-xtradb-cluster-galera-26, wsrep
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.0), libssl3t64 (>= 3.0.0), libstdc++6 (>= 14)
Pre-Depends: adduser
Breaks: galera-3 (<< 26.4)
Conflicts: garbd-2, garbd-3, garbd2, garbd3, percona-galera-3, percona-galera-4, percona-xtradb-cluster-galera, percona-xtradb-cluster-galera-2.x, percona-xtradb-cluster-galera-3.x, percona-xtradb-cluster-galera-4.x, percona-xtradb-cluster-garbd-2.x, percona-xtradb-cluster-garbd-3.x
Description: Replication framework for transactional applications
 Galera is a fast synchronous multimaster wsrep provider (replication engine)
 for transactional databases and similar applications. For more information
 about wsrep API see https://github.com/codership/wsrep-API. For a description
 of Galera replication engine see http://galeracluster.com.
 .
 This package contains the Galera library/plugin.
Homepage: https://www.galeracluster.com/

Package: gawk
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 2911
Maintainer: Adrian Bunk <bunk@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gawk (1:5.2.1-2)
Version: 1:5.2.1-2+b1
Provides: awk
Pre-Depends: libc6 (>= 2.34), libgmp10 (>= 2:6.3.0+dfsg), libmpfr6 (>= 3.1.3), libreadline8t64 (>= 6.0), libsigsegv2 (>= 2.9)
Suggests: gawk-doc
Conffiles:
 /etc/profile.d/gawk.csh b3d9e29a36f945b2065b2f88d18dadaa
 /etc/profile.d/gawk.sh bfc054c0862d0fad98ca641b951c7061
Description: GNU awk, a pattern scanning and processing language
 `awk', a program that you can use to select particular records in a
 file and perform operations upon them.
 .
 Gawk is the GNU Project's implementation of the AWK programming language.
 It conforms to the definition of the language in the POSIX 1003.2 Command
 Language And Utilities Standard. This version in turn is based on the
 description in The AWK Programming Language, by Aho, Kernighan, and
 Weinberger, with the additional features defined in the System V Release
 4 version of UNIX awk. Gawk also provides more recent Bell Labs awk
 extensions, and some GNU-specific extensions.
Homepage: http://www.gnu.org/software/gawk/

Package: gcc
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 36
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Source: gcc-defaults (1.220)
Version: 4:14.2.0-1
Provides: c-compiler
Depends: cpp (= 4:14.2.0-1), cpp-x86-64-linux-gnu (= 4:14.2.0-1), gcc-14 (>= 14.2.0-6~), gcc-x86-64-linux-gnu (= 4:14.2.0-1)
Recommends: libc6-dev | libc-dev
Suggests: gcc-multilib, make, manpages-dev, autoconf, automake, libtool, flex, bison, gdb, gcc-doc
Conflicts: gcc-doc (<< 1:2.95.3)
Description: GNU C compiler
 This is the GNU C compiler, a fairly portable optimizing compiler for C.
 .
 This is a dependency package providing the default GNU C compiler.

Package: gcc-12
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 69344
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Version: 12.4.0-5
Replaces: cpp-12 (<< 7.1.1-8)
Provides: c-compiler
Depends: cpp-12 (= 12.4.0-5), gcc-12-base (= 12.4.0-5), libcc1-0 (>= 12.4.0-5), binutils (>= 2.44), libgcc-12-dev (= 12.4.0-5), libc6 (>= 2.38), libgcc-s1 (>= 3.0), libgmp10 (>= 2:6.3.0+dfsg), libisl23 (>= 0.15), libmpc3 (>= 1.1.0), libmpfr6 (>= 3.1.3), libstdc++6 (>= 5), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4)
Recommends: libc6-dev (>= 2.23-1~)
Suggests: gcc-12-multilib, gcc-12-doc (>= 12), gcc-12-locales (>= 12)
Description: GNU C compiler
 This is the GNU C compiler, a fairly portable optimizing compiler for C.
Homepage: http://gcc.gnu.org/

Package: gcc-12-base
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 106
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.4.0-5
Breaks: gnat (<< 12), gnat-10 (<< 10.3)
Description: GCC, the GNU Compiler Collection (base package)
 This package contains files common to all languages and libraries
 contained in the GNU Compiler Collection (GCC).
Homepage: http://gcc.gnu.org/

Package: gcc-14
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 622
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Version: 14.2.0-19
Replaces: cpp-14 (<< 7.1.1-8)
Provides: c-compiler
Depends: gcc-14-x86-64-linux-gnu (= 14.2.0-19), gcc-14-base (= 14.2.0-19), cpp-14 (= 14.2.0-19), binutils (>= 2.39)
Recommends: libc6-dev (>= 2.23-1~)
Suggests: gcc-14-multilib, gcc-14-doc (>= 14), gcc-14-locales (>= 14)
Description: GNU C compiler
 This is the GNU C compiler, a fairly portable optimizing compiler for C.
Homepage: http://gcc.gnu.org/

Package: gcc-14-base
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 112
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-14
Version: 14.2.0-19
Breaks: gnat (<< 7)
Description: GCC, the GNU Compiler Collection (base package)
 This package contains files common to all languages and libraries
 contained in the GNU Compiler Collection (GCC).
Homepage: http://gcc.gnu.org/

Package: gcc-14-x86-64-linux-gnu
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 68460
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gcc-14
Version: 14.2.0-19
Provides: c-compiler-x86-64-linux-gnu
Depends: cpp-14-x86-64-linux-gnu (= 14.2.0-19), gcc-14-base (= 14.2.0-19), libcc1-0 (>= 14.2.0-19), binutils-x86-64-linux-gnu (>= 2.39), libgcc-14-dev (= 14.2.0-19), libc6 (>= 2.38), libgcc-s1 (>= 3.0), libgmp10 (>= 2:6.3.0+dfsg), libisl23 (>= 0.15), libmpc3 (>= 1.1.0), libmpfr6 (>= 3.1.3), libstdc++6 (>= 5), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4)
Recommends: libc6-dev (>= 2.23-1~)
Suggests: gcc-14-doc (>= 14), gcc-14-locales (>= 14)
Description: GNU C compiler for the x86_64-linux-gnu architecture
 This is the GNU C compiler for the x86_64-linux-gnu architecture,
 a fairly portable optimizing compiler for C.
Homepage: http://gcc.gnu.org/

Package: gcc-x86-64-linux-gnu
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 23
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gcc-defaults (1.220)
Version: 4:14.2.0-1
Replaces: gcc (<< 4:13.2.0-3)
Depends: cpp-x86-64-linux-gnu (= 4:14.2.0-1), gcc-14-x86-64-linux-gnu (>= 14.2.0-6~)
Recommends: libc6-dev, libc-dev
Suggests: make, manpages-dev, autoconf, automake, libtool, flex, bison, gdb-x86-64-linux-gnu, gcc-doc
Breaks: gcc (<< 4:13.2.0-3)
Description: GNU C compiler for the amd64 architecture
 This is the GNU C compiler, a fairly portable optimizing compiler for C.
 .
 This is a dependency package providing the default GNU C cross-compiler
 for the amd64 architecture.

Package: gdisk
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 940
Maintainer: Jonathan Carter <jcc@debian.org>
Architecture: amd64
Version: 1.0.10-2
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.0), libncursesw6 (>= 6), libpopt0 (>= 1.14), libstdc++6 (>= 13.1), libtinfo6 (>= 6), libuuid1 (>= 2.16)
Recommends: groff-base
Description: GPT fdisk text-mode partitioning tool
 GPT fdisk (aka gdisk) is a text-mode partitioning
 tool that provides utilities for Globally Unique
 Identifier (GUID) Partition Table (GPT) disks.
 .
 Features:
 .
  - Edit GUID partition table definitions
  - In place conversion of BSD disklabels to GPT
  - In place conversion of MBR to GPT
  - In place conversion of GPT to MBR
  - Create hybrid MBR/GPT layouts
  - Repair damaged GPT data structures
  - Repair damaged MBR structures
  - Back up GPT data to a file (and restore from file)
Homepage: http://sourceforge.net/projects/gptfdisk/

Package: genisoimage
Status: install ok installed
Priority: optional
Section: otherosfs
Installed-Size: 1647
Maintainer: Joerg Jaspert <joerg@debian.org>
Architecture: amd64
Source: cdrkit
Version: 9:1.1.11-4
Replaces: mkisofs
Provides: mkisofs
Depends: libbz2-1.0, libc6 (>= 2.38), libmagic1t64 (>= 5.12), zlib1g (>= 1:1.1.4)
Suggests: wodim, cdrkit-doc
Conflicts: mkhybrid, mkisofs
Description: Creates ISO-9660 CD-ROM filesystem images
 genisoimage is a pre-mastering program for creating ISO-9660 CD-ROM
 filesystem images, which can then be written to CD or DVD media using
 the wodim program. genisoimage includes support for making bootable
 "El Torito" CDs, as well as CDs with support for the
 Macintosh HFS filesystem.
 .
 The package also includes extra tools useful for working with ISO images:
  * mkzftree - create ISO-9660 image with compressed contents
  * dirsplit - easily separate large directory contents into disks of
    predefined size
  * geteltorito - extract an El Torito boot image from a CD image
 .
 Please install cdrkit-doc if you want most of the documentation and
 README files.

Package: gettext-base
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 740
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gettext
Version: 0.23.1-2
Depends: libc6 (>= 2.38)
Description: GNU Internationalization utilities for the base system
 This package includes the gettext and ngettext programs which allow
 other packages to internationalize the messages given by shell scripts.
Homepage: https://www.gnu.org/software/gettext/

Package: ghostscript
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 183
Maintainer: Debian Printing Team <debian-printing@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 10.05.1~dfsg-1+deb13u3
Replaces: ghostscript-x (<< 10.02.0~dfsg-1)
Provides: ghostscript-x (= 10.05.1~dfsg-1+deb13u3), postscript-viewer
Depends: libgs10 (= 10.05.1~dfsg-1+deb13u3), libc6 (>= 2.34)
Suggests: texlive-binaries
Breaks: manpages-l10n (<< 4.22)
Conflicts: ghostscript-x (<< 10.02.0~dfsg-1)
Description: interpreter for the PostScript language and for PDF
 GPL Ghostscript is used for PostScript/PDF preview and printing.
 Usually as a back-end to a program such as ghostview,
 it can display PostScript and PDF documents in an X11 environment.
 .
 Furthermore, it can render PostScript and PDF files as graphics
 to be printed on non-PostScript printers.
 Supported printers include common dot-matrix, inkjet and laser models.
 .
 The suggested texlive-binaries package is only required when using dvipdf.
Homepage: https://www.ghostscript.com/

Package: gir1.2-girepository-2.0
Status: install ok installed
Priority: optional
Section: introspection
Installed-Size: 106
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gobject-introspection
Version: 1.84.0-1
Replaces: gir1.2-glib-2.0 (<< 1.78.1-7~)
Depends: gir1.2-gobject-2.0 (>= 2.82.0), libgirepository-1.0-1 (>= 1.75.6)
Breaks: gir1.2-glib-2.0 (<< 1.78.1-7~), gjs (<< 1.78.1-2~), pygobject (<< 3.46.0-3~)
Description: Introspection data for GIRepository library
 GObject Introspection is a project for providing machine readable
 introspection data of the API of C libraries. This introspection
 data can be used in several different use cases, for example
 automatic code generation for bindings, API verification and documentation
 generation.
 .
 This package contains the introspection data for the GIRepository library,
 which can be used to manipulate the search path used by language bindings
 and load introspection data.
Homepage: https://wiki.gnome.org/GObjectIntrospection

Package: gir1.2-glib-2.0
Status: install ok installed
Priority: optional
Section: introspection
Installed-Size: 779
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: glib2.0
Version: 2.84.4-3~deb13u5
Provides: gir1.2-gio-2.0 (= 2.84.4-3~deb13u5), gir1.2-giounix-2.0 (= 2.84.4-3~deb13u5), gir1.2-glibunix-2.0 (= 2.84.4-3~deb13u5), gir1.2-gmodule-2.0 (= 2.84.4-3~deb13u5), gir1.2-gobject-2.0 (= 2.84.4-3~deb13u5)
Depends: libglib2.0-0t64 (= 2.84.4-3~deb13u5)
Breaks: libgirepository-1.0-1 (<< 1.78.1-3~)
Description: Introspection data for GLib, GObject, Gio and GModule
 GObject Introspection is a project for providing machine readable
 introspection data of the API of C libraries. This introspection
 data can be used in several different use cases, for example
 automatic code generation for bindings, API verification and documentation
 generation.
 .
 This package contains the introspection data for the GLib, GObject,
 GModule and Gio libraries, in the typelib format used to generate
 bindings for dynamic languages like JavaScript and Python.
Homepage: https://gitlab.gnome.org/GNOME/glib

Package: gir1.2-nm-1.0
Status: install ok installed
Priority: optional
Section: introspection
Installed-Size: 368
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: network-manager
Version: 1.52.1-1
Depends: gir1.2-gio-2.0, libnm0 (>= 1.52.0)
Description: GObject introspection data for the libnm library
 NetworkManager is a system network service that manages your network devices
 and connections, attempting to keep active network connectivity when
 available. It manages ethernet, Wi-Fi, mobile broadband (WWAN), and PPPoE
 devices, and provides VPN integration with a variety of different VPN
 services.
 .
 This package contains introspection data for NetworkManager using libnm.
 .
 It can be used by packages using the GIRepository format to generate
 dynamic bindings.
Homepage: https://networkmanager.dev/

Package: git
Status: install ok installed
Priority: optional
Section: vcs
Installed-Size: 49154
Maintainer: Jonathan Nieder <jrnieder@gmail.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1:2.47.3-0+deb13u1
Provides: git-completion, git-core
Depends: libc6 (>= 2.38), libcurl3t64-gnutls (>= 7.56.1), libexpat1 (>= 2.0.1), libpcre2-8-0 (>= 10.34), zlib1g (>= 1:1.2.2), perl, liberror-perl, git-man (>> 1:2.47.3), git-man (<< 1:2.47.3-.)
Recommends: ca-certificates, patch, less, ssh-client
Suggests: gettext-base, git-doc, git-email, git-gui, gitk, gitweb, git-cvs, git-mediawiki, git-svn
Breaks: bash-completion (<< 1:1.90-1), cogito (<= 0.18.2+), dgit (<< 5.1~), git-buildpackage (<< 0.6.5), git-el (<< 1:2.32.0~rc2-1~), gitosis (<< 0.2+20090917-7), gitpkg (<< 0.15), guilt (<< 0.33), openssh-client (<< 1:6.8), stgit (<< 0.15), stgit-contrib (<< 0.15)
Conffiles:
 /etc/bash_completion.d/git-prompt 7baac5c3ced94ebf2c0e1dde65c3b1a6
Description: fast, scalable, distributed revision control system
 Git is popular version control system designed to handle very large
 projects with speed and efficiency; it is used for many high profile
 open source projects, most notably the Linux kernel.
 .
 Git falls in the category of distributed source code management tools.
 Every Git working directory is a full-fledged repository with full
 revision tracking capabilities, not dependent on network access or a
 central server.
 .
 This package provides the git main components with minimal dependencies.
 Additional functionality, e.g. a graphical user interface and revision
 tree visualizer, tools for interoperating with other VCS's, or a web
 interface, is provided as separate git* packages.
Homepage: https://git-scm.com/

Package: git-man
Status: install ok installed
Priority: optional
Section: doc
Installed-Size: 2251
Maintainer: Jonathan Nieder <jrnieder@gmail.com>
Architecture: all
Multi-Arch: foreign
Source: git
Version: 1:2.47.3-0+deb13u1
Description: fast, scalable, distributed revision control system (manual pages)
 Git is popular version control system designed to handle very large
 projects with speed and efficiency; it is used for many high profile
 open source projects, most notably the Linux kernel.
 .
 Git falls in the category of distributed source code management tools.
 Every Git working directory is a full-fledged repository with full
 revision tracking capabilities, not dependent on network access or a
 central server.
 .
 This package provides reference documentation for use by the 'man'
 utility and the 'git help' command.
Homepage: https://git-scm.com/

Package: gnupg
Status: install ok installed
Priority: optional
Section: metapackages
Installed-Size: 468
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: gnupg2
Version: 2.4.7-21+deb13u1
Depends: dirmngr (<< 2.4.7-21+deb13u1.1~), dirmngr (>= 2.4.7-21+deb13u1), gnupg-l10n (= 2.4.7-21+deb13u1), gpg (<< 2.4.7-21+deb13u1.1~), gpg (>= 2.4.7-21+deb13u1), gpg-agent (<< 2.4.7-21+deb13u1.1~), gpg-agent (>= 2.4.7-21+deb13u1), gpgsm (<< 2.4.7-21+deb13u1.1~), gpgsm (>= 2.4.7-21+deb13u1)
Recommends: gnupg-utils (<< 2.4.7-21+deb13u1.1~), gnupg-utils (>= 2.4.7-21+deb13u1), gpg-wks-client (<< 2.4.7-21+deb13u1.1~), gpg-wks-client (>= 2.4.7-21+deb13u1), gpgv (<< 2.4.7-21+deb13u1.1~), gpgv (>= 2.4.7-21+deb13u1)
Suggests: gpg-wks-server (<< 2.4.7-21+deb13u1.1~), gpg-wks-server (>= 2.4.7-21+deb13u1), parcimonie, xloadimage
Breaks: debsig-verify (<< 0.15), dirmngr (<< 2.4.7-21+deb13u1), libgnupg-interface-perl (<< 0.52-3), libgnupg-perl (<= 0.19-1), libmail-gnupg-perl (<= 0.22-1), monkeysphere (<< 0.38~), php-crypt-gpg (<= 1.4.1-1), python-apt (<= 1.1.0~beta4), python-gnupg (<< 0.3.8-3), python3-apt (<= 1.1.0~beta4)
Description: GNU privacy guard - a free PGP replacement
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC4880.
 .
 This package contains the full suite of GnuPG tools for cryptographic
 communications and data storage.
Homepage: https://www.gnupg.org/

Package: gnupg-l10n
Status: install ok installed
Priority: optional
Section: localization
Installed-Size: 5010
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: gnupg2
Version: 2.4.7-21+deb13u1
Enhances: dirmngr, gpg, gpg-agent
Description: GNU privacy guard - localization files
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC 4880.
 .
 This package contains the translation files for the use of GnuPG in
 non-English locales.
Homepage: https://www.gnupg.org/

Package: gnupg-utils
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 749
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2 (2.4.7-21+deb13u1)
Version: 2.4.7-21+deb13u1+b5
Replaces: gnupg (<< 2.1.21-4), gnupg-agent (<< 2.1.21-4)
Depends: libbz2-1.0, libc6 (>= 2.38), libgcrypt20 (>= 1.11.0), libgpg-error0 (>= 1.50), libksba8 (>= 1.6.3), zlib1g (>= 1:1.1.4)
Recommends: gpg, gpg-agent, gpgconf, gpgsm
Breaks: gnupg (<< 2.1.21-4), gnupg-agent (<< 2.1.21-4)
Description: GNU privacy guard - utility programs
 GnuPG is GNU's tool for secure communication and data storage.
 .
 This package contains several useful utilities for manipulating
 OpenPGP data and other related cryptographic elements.  It includes:
 .
  * addgnupghome -- create .gnupg home directories
  * applygnupgdefaults -- run gpgconf --apply-defaults for all users
  * gpgparsemail -- parse an e-mail message into annotated format
  * gpgsplit -- split a sequence of OpenPGP packets into files
  * gpgtar -- encrypt or sign files in an archive
  * kbxutil -- list, export, import Keybox data
  * lspgpot -- convert PGP ownertrust values to GnuPG
  * migrate-pubring-from-classic-gpg -- use only "modern" formats
  * symcryptrun -- use simple symmetric encryption tool in GnuPG framework
  * watchgnupg -- watch socket-based logs
Homepage: https://www.gnupg.org/

Package: gpg
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1594
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2 (2.4.7-21+deb13u1)
Version: 2.4.7-21+deb13u1+b5
Replaces: gnupg (<< 2.1.21-4), keyboxd (<< 2.4.7-4)
Provides: keyboxd (= 2.4.7-21+deb13u1+b5)
Depends: gpgconf (= 2.4.7-21+deb13u1+b5), init-system-helpers (>= 1.52), libassuan9 (>= 2.5.1), libbz2-1.0, libc6 (>= 2.38), libgcrypt20 (>= 1.11.0), libgpg-error0 (>= 1.49), libksba8 (>= 1.6.3), libnpth0t64 (>= 1.2), libreadline8t64 (>= 6.0), libsqlite3-0 (>= 3.14.0), zlib1g (>= 1:1.1.4)
Recommends: gnupg (= 2.4.7-21+deb13u1)
Breaks: gnupg (<< 2.1.21-4), keyboxd (<< 2.4.7-4)
Description: GNU Privacy Guard -- minimalist public key operations
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC4880.
 .
 This package contains /usr/bin/gpg itself, and is useful on its own
 only for public key operations (encryption, signature verification,
 listing OpenPGP certificates, etc).  If you want full capabilities
 (including secret key operations, network access, etc), please
 install the "gnupg" package, which pulls in the full suite of tools.
Homepage: https://www.gnupg.org/

Package: gpg-agent
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 899
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2 (2.4.7-21+deb13u1)
Version: 2.4.7-21+deb13u1+b5
Replaces: gnupg-agent (<< 2.1.21-4)
Provides: gnupg-agent
Depends: gpgconf (= 2.4.7-21+deb13u1+b5), pinentry-curses | pinentry, init-system-helpers (>= 1.52), libassuan9 (>= 2.5.1), libc6 (>= 2.38), libgcrypt20 (>= 1.11.0), libgpg-error0 (>= 1.49), libnpth0t64 (>= 1.2)
Recommends: gnupg (= 2.4.7-21+deb13u1)
Suggests: dbus-user-session, libpam-systemd, pinentry-gnome3, scdaemon, tpm2daemon
Breaks: gnupg-agent (<< 2.1.21-4)
Conffiles:
 /etc/X11/Xsession.d/90gpg-agent 444b1f7d2bc0f05b8fff51f58bd99ed9
 /etc/logcheck/ignore.d.server/gpg-agent 2d0fbc91a955ba69408ca033d7ae2455
Description: GNU privacy guard - cryptographic agent
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC4880.
 .
 This package contains the agent program gpg-agent which handles all
 secret key material for OpenPGP and S/MIME use.  The agent also
 provides a passphrase cache, which is used by pre-2.1 versions of
 GnuPG for OpenPGP operations.  Without this package, trying to do
 secret-key operations with any part of the modern GnuPG suite will
 fail.
Homepage: https://www.gnupg.org/

Package: gpg-wks-client
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 258
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2 (2.4.7-21+deb13u1)
Version: 2.4.7-21+deb13u1+b5
Depends: dirmngr (= 2.4.7-21+deb13u1+b5), gpg (= 2.4.7-21+deb13u1+b5), gpg-agent (= 2.4.7-21+deb13u1+b5), libassuan9 (>= 2.5.0), libc6 (>= 2.38), libgcrypt20 (>= 1.11.0), libgpg-error0 (>= 1.48)
Recommends: gnupg (= 2.4.7-21+deb13u1)
Description: GNU privacy guard - Web Key Service client
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC4880.
 .
 This package provides the GnuPG client for the Web Key Service
 protocol.
 .
 A Web Key Service is a service that allows users to upload keys per
 mail to be verified over https as described in
 https://tools.ietf.org/html/draft-koch-openpgp-webkey-service
 .
 For more information see: https://wiki.gnupg.org/WKS
Homepage: https://www.gnupg.org/

Package: gpg-wks-server
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 226
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2 (2.4.7-21+deb13u1)
Version: 2.4.7-21+deb13u1+b5
Depends: default-mta | mail-transport-agent, gpg (= 2.4.7-21+deb13u1+b5), gpg-agent (= 2.4.7-21+deb13u1+b5), libc6 (>= 2.38), libgcrypt20 (>= 1.11.0), libgpg-error0 (>= 1.48)
Recommends: gnupg (= 2.4.7-21+deb13u1)
Description: GNU privacy guard - Web Key Service server
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC4880.
 .
 This package provides the GnuPG server for the Web Key Service
 protocol.
 .
 A Web Key Service is a service that allows users to upload keys per
 mail to be verified over https as described in
 https://tools.ietf.org/html/draft-koch-openpgp-webkey-service
 .
 For more information see: https://wiki.gnupg.org/WKS
Homepage: https://www.gnupg.org/

Package: gpgconf
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 371
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2 (2.4.7-21+deb13u1)
Version: 2.4.7-21+deb13u1+b5
Replaces: gnupg (<< 2.1.21-4), gnupg-agent (<< 2.1.21-4)
Depends: libassuan9 (>= 2.5.0), libc6 (>= 2.38), libgcrypt20 (>= 1.11.0), libgpg-error0 (>= 1.48), libreadline8t64 (>= 6.0)
Breaks: gnupg (<< 2.1.21-4), gnupg-agent (<< 2.1.21-4)
Description: GNU privacy guard - core configuration utilities
 GnuPG is GNU's tool for secure communication and data storage.
 .
 This package contains core utilities used by different tools in the
 suite offered by GnuPG.  It can be used to programmatically edit
 config files for tools in the GnuPG suite, to launch or terminate
 per-user daemons (if installed), etc.
Homepage: https://www.gnupg.org/

Package: gpgsm
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 664
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2 (2.4.7-21+deb13u1)
Version: 2.4.7-21+deb13u1+b5
Depends: gpgconf (= 2.4.7-21+deb13u1+b5), libassuan9 (>= 2.5.0), libc6 (>= 2.38), libgcrypt20 (>= 1.11.0), libgpg-error0 (>= 1.49), libksba8 (>= 1.6.3), libnpth0t64 (>= 1.2), libreadline8t64 (>= 6.0)
Recommends: gnupg (= 2.4.7-21+deb13u1)
Description: GNU privacy guard - S/MIME version
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC4880.
 .
 This package contains the gpgsm program. gpgsm is a tool to provide
 digital encryption and signing services on X.509 certificates and the
 CMS protocol. gpgsm includes complete certificate management.
Homepage: https://www.gnupg.org/

Package: gpgv
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 560
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2 (2.4.7-21+deb13u1)
Version: 2.4.7-21+deb13u1+b5
Depends: libbz2-1.0, libc6 (>= 2.38), libgcrypt20 (>= 1.11.0), libgpg-error0 (>= 1.49), zlib1g (>= 1:1.1.4)
Suggests: gnupg
Breaks: python-debian (<< 0.1.29)
Description: GNU privacy guard - signature verification tool
 GnuPG is GNU's tool for secure communication and data storage.
 .
 gpgv is actually a stripped-down version of gpg which is only able
 to check signatures. It is somewhat smaller than the fully-blown gpg
 and uses a different (and simpler) way to check that the public keys
 used to make the signature are valid. There are no configuration
 files and only a few options are implemented.
Homepage: https://www.gnupg.org/

Package: grep
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 1266
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 3.11-4
Provides: rgrep
Pre-Depends: libc6 (>= 2.34), libpcre2-8-0 (>= 10.32)
Conflicts: rgrep
Description: GNU grep, egrep and fgrep
 'grep' is a utility to search for text in files; it can be used from the
 command line or in scripts.  Even if you don't want to use it, other packages
 on your system probably will.
 .
 The GNU family of grep utilities may be the "fastest grep in the west".
 GNU grep is based on a fast lazy-state deterministic matcher (about
 twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper
 search for a fixed string that eliminates impossible text from being
 considered by the full regexp matcher without necessarily having to
 look at every character. The result is typically many times faster
 than Unix grep or egrep. (Regular expressions containing backreferencing
 will run more slowly, however.)
Homepage: https://www.gnu.org/software/grep/

Package: groff-base
Status: install ok installed
Priority: important
Section: text
Installed-Size: 4184
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: groff
Version: 1.23.0-9
Depends: libc6 (>= 2.38), libgcc-s1 (>= 4.0), libstdc++6 (>= 4.1.1), libuchardet0 (>= 0.0.1)
Suggests: groff
Conffiles:
 /etc/groff/man.local 0430e21404e7bde42b0e0fee0fd60c00
 /etc/groff/mdoc.local 93e49c8bd131bfa85a469d836dd7a28a
Description: GNU troff text-formatting system (base system components)
 This package contains the traditional UN*X text formatting tools
 troff, nroff, tbl, eqn, and pic. These utilities, together with the
 man-db package, are essential for displaying the on-line manual pages.
 .
 groff-base is a stripped-down package containing the necessary components
 to read manual pages in ASCII, Latin-1, and UTF-8, plus the PostScript
 device (groff's default). Users who want a full groff installation, with
 the standard set of devices, fonts, macros, and documentation, should
 install the groff package.
Homepage: https://www.gnu.org/software/groff/

Package: grub-cloud-amd64
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 14
Maintainer: Debian Cloud Team <debian-cloud@lists.debian.org>
Architecture: amd64
Source: grub-cloud
Version: 0.1.1
Depends: grub2-common (>= 2.02+dfsg1-7), grub-efi-amd64-bin, grub-efi-amd64-signed, grub-pc-bin, shim-signed
Conffiles:
 /etc/default/grub bb1ef86254b1b4acb543c21b2c1512db
Description: GRand Unified Bootloader (cloud setup)
 This package contains the cloud image setup of GRUB and installs GRUB for the
 PC/BIOS and the EFI-AMD64 architecture.
 .
 You don't want to use this package outside of cloud images.

Package: grub-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 17639
Maintainer: GRUB Maintainers <pkg-grub-devel@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: foreign
Source: grub2
Version: 2.12-9+deb13u2
Replaces: grub-coreboot (<< 2.00-4), grub-efi (<< 1.99-1), grub-efi-amd64 (<< 2.00-4), grub-efi-ia32 (<< 2.00-4), grub-efi-ia64 (<< 2.00-4), grub-ieee1275 (<< 2.00-4), grub-linuxbios (<< 1.96+20080831-1), grub-pc (<< 2.00-4), grub-yeeloong (<< 2.00-4), init-select
Depends: libc6 (>= 2.38), libdevmapper1.02.1 (>= 2:1.02.197), libefiboot1t64 (>= 38), libefivar1t64 (>= 38), libfreetype6 (>= 2.2.1), libfuse3-4 (>= 3.17.2), liblzma5 (>= 5.1.1alpha+20120614), gettext-base
Recommends: os-prober (>= 1.33)
Suggests: multiboot-doc, grub-emu, mtools, xorriso (>= 0.5.6.pl00), desktop-base (>= 4.0.6), console-setup
Breaks: apport (<< 2.1.1), friendly-recovery (<< 0.2.13), grub-efi-amd64-signed (<< 1+2.12~rc1), grub-efi-arm64-signed (<< 1+2.12~rc1), grub-efi-ia32-signed (<< 1+2.12~rc1), lupin-support (<< 0.55), mdadm (<< 2.6.7-2)
Conflicts: init-select
Conffiles:
 /etc/grub.d/00_header 033e1905144dec9fd7d73b4d223f20cd
 /etc/grub.d/05_debian_theme fe5f9d6282150de338d13b2867af0390
 /etc/grub.d/10_linux 276ce7766b5c0f524b40c0b9c5592d93
 /etc/grub.d/20_linux_xen 3f307089941f675beb576783669ac9e1
 /etc/grub.d/25_bli e071d24e35e554a6e6446068f59715f6
 /etc/grub.d/30_os-prober 9e7e433ed21c635b0d102a06da4ae5e2
 /etc/grub.d/30_uefi-firmware 2d918e14d15f40c01398a7534702870d
 /etc/grub.d/40_custom babe7de352fe18de5a238569cf4b8a11
 /etc/grub.d/41_custom 1d876baff8ca3841aa6ba057e881a2e4
 /etc/grub.d/README be58f42dfe74feb6eeb98c6a843c743f
Description: GRand Unified Bootloader (common files)
 This package contains common files shared by the distinct flavours of GRUB.
 It is shared between GRUB Legacy and GRUB 2, although a number of files
 specific to GRUB 2 are here as long as they do not break GRUB Legacy.
 .
 grub-mkrescue needs the suggested packages mtools (for UEFI targets) and
 xorriso.
Built-Using: lzo2 (= 2.10-3)
Homepage: https://www.gnu.org/software/grub/

Package: grub-efi-amd64-bin
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 3304
Maintainer: GRUB Maintainers <pkg-grub-devel@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: foreign
Source: grub2
Version: 2.12-9+deb13u2
Replaces: grub-common (<= 1.97~beta2-1), grub-efi-amd64 (<< 1.99-1), grub2 (<< 2.12-9+deb13u2)
Depends: grub-common (= 2.12-9+deb13u2), grub-efi-amd64-unsigned
Recommends: grub-efi-amd64-signed, efibootmgr
Breaks: grub-efi-amd64-signed (<< 1+2.12~rc1)
Description: GRand Unified Bootloader, version 2 (EFI-AMD64 modules)
 GRUB is a portable, powerful bootloader.  This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
  - Scripting in grub.cfg using BASH-like syntax.
  - Support for modern partition maps such as GPT.
  - Modular generation of grub.cfg via update-grub.  Packages providing GRUB
    add-ons can plug in their own script rules and trigger updates by invoking
    update-grub.
 .
 This package contains GRUB modules that have been built for use with the
 EFI-AMD64 architecture, as used by Intel Macs (unless a BIOS interface has
 been activated).  It can be installed in parallel with other flavours, but
 will not automatically install GRUB as the active boot loader nor
 automatically update grub.cfg on upgrade unless grub-efi-amd64 is also
 installed.
Homepage: https://www.gnu.org/software/grub/
Efi-Vendor: debian

Package: grub-efi-amd64-signed
Protected: yes
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 9492
Maintainer: GRUB Maintainers <pkg-grub-devel@alioth-lists.debian.net>
Architecture: amd64
Version: 1+2.12+9+deb13u2
Depends: grub-common (= 2.12-9+deb13u2)
Recommends: shim-signed
Description: GRand Unified Bootloader, version 2 (amd64 UEFI signed by Debian)
 GRUB is a portable, powerful bootloader.  This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
  - Scripting in grub.cfg using BASH-like syntax.
  - Support for modern partition maps such as GPT.
  - Modular generation of grub.cfg via update-grub.  Packages providing GRUB
    add-ons can plug in their own script rules and trigger updates by invoking
    update-grub.
 .
 This package contains the binaries signed by the Debian UEFI CA to be used by
 shim-signed.
Built-Using: grub2 (= 2.12-9+deb13u2)

Package: grub-efi-amd64-unsigned
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 9487
Maintainer: GRUB Maintainers <pkg-grub-devel@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: foreign
Source: grub2
Version: 2.12-9+deb13u2
Replaces: grub-efi-amd64-bin (<< 2.12-3~)
Depends: grub-common (= 2.12-9+deb13u2)
Breaks: grub-efi-amd64-bin (<< 2.12-3~)
Description: GRand Unified Bootloader, version 2 (EFI-AMD64 images)
 GRUB is a portable, powerful bootloader.  This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
  - Scripting in grub.cfg using BASH-like syntax.
  - Support for modern partition maps such as GPT.
  - Modular generation of grub.cfg via update-grub.  Packages providing GRUB
    add-ons can plug in their own script rules and trigger updates by invoking
    update-grub.
 .
 This package contains GRUB images that have been built for use with the
 EFI-AMD64 architecture, as used by Intel Macs (unless a BIOS interface has
 been activated).  It can be installed in parallel with other flavours, but
 will not automatically install GRUB as the active boot loader nor
 automatically update grub.cfg on upgrade unless grub-efi-amd64 is also
 installed.
Homepage: https://www.gnu.org/software/grub/
Efi-Vendor: debian

Package: grub-pc-bin
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 3171
Maintainer: GRUB Maintainers <pkg-grub-devel@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: foreign
Source: grub2
Version: 2.12-9+deb13u2
Replaces: grub-common (<= 1.97~beta2-1), grub-pc (<< 1.99-1), grub2 (<< 2.12-9+deb13u2)
Depends: libc6 (>= 2.38), libdevmapper1.02.1 (>= 2:1.02.197), grub-common (= 2.12-9+deb13u2)
Suggests: desktop-base (>= 4.0.6)
Description: GRand Unified Bootloader, version 2 (PC/BIOS modules)
 GRUB is a portable, powerful bootloader.  This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
  - Scripting in grub.cfg using BASH-like syntax.
  - Support for modern partition maps such as GPT.
  - Modular generation of grub.cfg via update-grub.  Packages providing GRUB
    add-ons can plug in their own script rules and trigger updates by invoking
    update-grub.
  - VESA-based graphical mode with background image support and complete 24-bit
    color set.
  - Support for extended charsets.  Users can write UTF-8 text to their menu
    entries.
 .
 This package contains GRUB modules that have been built for use with the
 traditional PC/BIOS architecture.  It can be installed in parallel with
 other flavours, but will not automatically install GRUB as the active boot
 loader nor automatically update grub.cfg on upgrade unless grub-pc is also
 installed.
Homepage: https://www.gnu.org/software/grub/

Package: grub2-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1404
Maintainer: GRUB Maintainers <pkg-grub-devel@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: foreign
Source: grub2
Version: 2.12-9+deb13u2
Replaces: grub, grub-cloud-amd64 (<< 0.0.4), grub-common (<< 1.99-1), grub-coreboot (<< 2.02+dfsg1-7), grub-doc (<< 0.97-32), grub-efi-amd64 (<< 2.02+dfsg1-7), grub-efi-arm (<< 2.02+dfsg1-7), grub-efi-arm64 (<< 2.02+dfsg1-7), grub-efi-ia32 (<< 2.02+dfsg1-7), grub-efi-ia64 (<< 2.02+dfsg1-7), grub-ieee1275 (<< 2.02+dfsg1-7), grub-legacy, grub-legacy-doc (<< 0.97-59), grub-pc (<< 2.02+dfsg1-7), grub-uboot (<< 2.02+dfsg1-7), grub-xen (<< 2.02+dfsg1-7), grub-yeeloong (<< 2.02+dfsg1-7)
Depends: grub-common (= 2.12-9+deb13u2), dpkg (>= 1.15.4), libc6 (>= 2.38), libdevmapper1.02.1 (>= 2:1.02.197), libefiboot1t64 (>= 38), libefivar1t64 (>= 38), liblzma5 (>= 5.1.1alpha+20120614)
Breaks: grub (<< 0.97-54), grub-cloud-amd64 (<< 0.0.4), grub-coreboot (<< 2.02+dfsg1-7), grub-doc (<< 0.97-32), grub-efi-amd64 (<< 2.02+dfsg1-7), grub-efi-arm (<< 2.02+dfsg1-7), grub-efi-arm64 (<< 2.02+dfsg1-7), grub-efi-ia32 (<< 2.02+dfsg1-7), grub-efi-ia64 (<< 2.02+dfsg1-7), grub-ieee1275 (<< 2.02+dfsg1-7), grub-legacy (<< 0.97-83~), grub-legacy-doc (<< 0.97-59), grub-pc (<< 2.02+dfsg1-7), grub-uboot (<< 2.02+dfsg1-7), grub-xen (<< 2.02+dfsg1-7), grub-yeeloong (<< 2.02+dfsg1-7), shim (<< 0.9+1474479173.6c180c6-0ubuntu1~)
Conffiles:
 /etc/kernel/postinst.d/zz-update-grub 5a98abefbfe97dbed36db7899251e433
 /etc/kernel/postrm.d/zz-update-grub 5a98abefbfe97dbed36db7899251e433
Description: GRand Unified Bootloader (common files for version 2)
 This package contains common files shared by the distinct flavours of GRUB.
 The files in this package are specific to GRUB 2, and would break GRUB
 Legacy if installed on the same system.
Homepage: https://www.gnu.org/software/grub/

Package: gsfonts
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 65
Maintainer: Debian Fonts Task Force <debian-fonts@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: fonts-urw-base35 (20200910-8)
Version: 2:20200910-8
Depends: fonts-urw-base35 (>= 20200910-2~)
Breaks: grace (<= 1:5.1.25-12)
Description: transitional dummy package (gsfonts -> fonts-urw-base35)
 This package is a dummy package to enable the gsfonts to fonts-urw-base35
 transition. It can be safely removed.
Homepage: https://github.com/ArtifexSoftware/urw-base35-fonts

Package: gzip
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 256
Maintainer: Milan Kupcevic <milan@debian.org>
Architecture: amd64
Version: 1.13-1+deb13u1
Pre-Depends: libc6 (>= 2.38)
Suggests: less
Conflicts: zutils (<< 1.13-2~)
Description: GNU compression utilities
 This package provides the standard GNU file compression utilities, which
 are also the default compression tools for Debian.  They typically operate
 on files with names ending in '.gz', but can also decompress files ending
 in '.Z' created with 'compress'.
Homepage: https://www.gnu.org/software/gzip/

Package: heif-gdk-pixbuf
Status: install ok installed
Priority: optional
Section: graphics
Installed-Size: 43
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libheif
Version: 1.23.4-1~deb13u1
Depends: libheif1 (= 1.23.4-1~deb13u1), libc6 (>= 2.4), libgdk-pixbuf-2.0-0 (>= 2.22.0), libglib2.0-0t64 (>= 2.12.0)
Description: HEIF and AVIF file format decoder and encoder - gdk-pixbuf loader
 libheif is an ISO/IEC 23008-12:2017 HEIF and AVIF (AV1 Image File Format) file
 format decoder and encoder. There is partial support for ISO/IEC 23008-12:2022
 (2nd Edition) capabilities.
 .
 HEIF and AVIF are new image file formats employing HEVC (H.265) or AV1 image
 coding, respectively, for the best compression ratios currently possible.
 .
 libheif supports various codecs provided by plugins for image decoding and
 encoding.
 .
 A gdk-pixbuf loader module for applications such as "gpicview" and "pcmanfm"
 is provided by this package.
Homepage: http://www.libheif.org

Package: hicolor-icon-theme
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 780
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.18-2
Description: default fallback theme for FreeDesktop.org icon themes
 This is the default fallback theme used by implementations of the
 Freedesktop.org Icon Theme specification.

Package: hostname
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 50
Maintainer: Michael Meskes <meskes@debian.org>
Architecture: amd64
Version: 3.25
Replaces: nis (<< 3.17-30)
Pre-Depends: libc6 (>= 2.34)
Breaks: nis (<< 3.17-30)
Description: utility to set/show the host name or domain name
 This package provides commands which can be used to display the system's
 DNS name, and to display or set its hostname or NIS domain name.

Package: htop
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 424
Maintainer: Daniel Lange <DLange@debian.org>
Architecture: amd64
Version: 3.4.1-5
Depends: libc6 (>= 2.38), libncursesw6 (>= 6), libtinfo6 (>= 6)
Suggests: lm-sensors, lsof, strace
Description: interactive processes viewer
 Htop is an ncursed-based process viewer similar to top, but it
 allows one to scroll the list vertically and horizontally to see
 all processes and their full command lines.
 .
 Tasks related to processes (killing, renicing) can be done without
 entering their PIDs.
Homepage: https://htop.dev/

Package: i965-va-driver
Status: install ok installed
Priority: optional
Section: video
Installed-Size: 1776
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: intel-vaapi-driver
Version: 2.4.1+dfsg1-2
Provides: va-driver
Depends: libva-driver-abi-1.22, libc6 (>= 2.38), libdrm-intel1 (>= 2.4.46), libdrm2 (>= 2.3.1)
Suggests: i965-va-driver-shaders
Enhances: libva2
Description: VAAPI driver for Intel G45 & HD Graphics family
 The VA-API (Video Acceleration API) enables hardware accelerated video
 decode/encode at various entry-points (VLD, IDCT, Motion Compensation
 etc.) for the prevailing coding standards today (MPEG-2, MPEG-4
 ASP/H.263, MPEG-4 AVC/H.264, and VC-1/WMV3). It provides an interface
 to fully expose the video decode capabilities in today's GPUs.
 .
 This package contains the video decode and encode driver backend for the
 Intel G45 chipsets and Intel HD Graphics for the Intel Core processor family.
 The supported platforms include:
  * Cantiga, Intel GMA 4500MHD (GM45)
  * Ironlake, Intel HD Graphics for 2010 Intel Core processor family
  * Sandy Bridge, Intel HD Graphics for 2011 Intel Core processor family
  * Ivy Bridge
  * Haswell
  * Broadwell
  * Skylake
  * Kaby Lake
  * Coffee Lake
  * Cannon Lake
Homepage: https://github.com/intel/intel-vaapi-driver/

Package: icu-devtools
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 756
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: icu
Version: 76.1-4
Replaces: icu-tools (<< 76.1~rc-1~), libicu-dev (<< 76.1-4)
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.0), libicu76 (>= 76.1-1~), libstdc++6 (>= 13.1)
Breaks: icu-tools (<< 76.1~rc-1~), libicu-dev (<< 76.1-4)
Description: Development utilities for International Components for Unicode
 ICU is a C++ and C library that provides robust and full-featured
 Unicode and locale support. This package contains programs used to
 manipulate data files found in the ICU sources and is a dependency of
 libicu-dev.  End users would generally not need to install this package.
Homepage: https://icu.unicode.org/

Package: imagemagick
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 84
Maintainer: ImageMagick Packaging Team <pkg-gmagick-im-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 8:7.1.1.43+dfsg1-1+deb13u12
Depends: imagemagick-7.q16 (>= 8:6.9.2.10+dfsg-2~)
Description: image manipulation programs -- binaries
 ImageMagick is a software suite to create, edit, and compose bitmap images.
 It can read, convert and write images in a variety of formats (over 100)
 including DPX, EXR, GIF, JPEG, JPEG-2000, PDF, PhotoCD, PNG, Postscript,
 SVG, and TIFF. Use ImageMagick to translate, flip, mirror, rotate, scale,
 shear and transform images, adjust image colors, apply various special
 effects, or draw text, lines, polygons, ellipses and Bézier curves.
 All manipulations can be achieved through shell commands as well as through
 an X11 graphical interface (display).
 .
 This is a dependency package.
 .
 This package include links to channel depth specific binaries and manual
 pages.
Homepage: https://www.imagemagick.org/

Package: imagemagick-6-common
Status: deinstall ok config-files
Priority: optional
Section: graphics
Installed-Size: 545
Maintainer: ImageMagick Packaging Team <pkg-gmagick-im-team@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: imagemagick
Version: 8:6.9.11.60+dfsg-1.6+deb12u13
Config-Version: 8:6.9.11.60+dfsg-1.6+deb12u13
Replaces: imagemagick-common (<< 8:6.9.2.10+dfsg-1~), libmagickcore-6.q16 (<< 8:6.9.6.2+dfsg-3~)
Provides: imagemagick-common
Breaks: imagemagick-common (<< 8:6.9.2.10+dfsg-1~), libmagickcore-6.q16-2 (<< 8:6.9.6.2+dfsg-3~), libmagickcore-6.q16-3 (<< 8:6.9.6.8+dfsg-1~), libmagickcore-6.q16-4 (<< 8:6.9.8.9+dfsg-1~), libmagickcore-6.q16hdri-4 (<< 8:6.9.8.9+dfsg-1~)
Conffiles:
 /etc/ImageMagick-6/coder.xml 2cd28d60bb45db29bba17f35dc58ccb9
 /etc/ImageMagick-6/colors.xml 7a58fb76b799bf829c55eecd08db28c2
 /etc/ImageMagick-6/delegates.xml 00f88a4ce8130b4dd764e8926289b26a
 /etc/ImageMagick-6/log.xml 29c0a0702c3729fec215ce53438eb608
 /etc/ImageMagick-6/magic.xml 04b219d820811a6cb1bc7af03b52b626
 /etc/ImageMagick-6/mime.xml a0c1c972c13db8986951e0016f5be31b
 /etc/ImageMagick-6/policy.xml ac16a7083b092130e93334bbd077e50c
 /etc/ImageMagick-6/quantization-table.xml 948aa1faac66b697266eaa55e8a052e5
 /etc/ImageMagick-6/thresholds.xml 99375e73d2a9a3acca91bf1011d15656
 /etc/ImageMagick-6/type-apple.xml 94aac3cbd6fdb6ccf338e8e60c3a6fcc
 /etc/ImageMagick-6/type-dejavu.xml 2914462b5aec3bf19f4f706c018e904f
 /etc/ImageMagick-6/type-ghostscript.xml 76f2f31af66d562422aa56095cf67284
 /etc/ImageMagick-6/type-urw-base35.xml 0cbc7447c3b14e3a26025cf0bec201f7
 /etc/ImageMagick-6/type-windows.xml 3a8000b7f83d4108e7c3024c1bcc403c
 /etc/ImageMagick-6/type.xml a355c73d6843b2bfb5b5d7bb9cf2a5de
Description: image manipulation programs -- infrastructure
 imagemagick-common contains the filesystem infrastructure required for
 further installation of imagemagick in any configuration; it does not provide
 a full installation of binaries, libraries, and utilities
 required to run imagemagick.
 .
 This package is independent of channel depth.
Homepage: https://www.imagemagick.org/

Package: imagemagick-6.q16
Status: install ok installed
Priority: optional
Section: graphics
Installed-Size: 625
Maintainer: ImageMagick Packaging Team <pkg-gmagick-im-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: imagemagick
Version: 8:6.9.11.60+dfsg-1.6+deb12u13
Replaces: imagemagick (<< 8:6.9.2.10+dfsg-2~)
Provides: imagemagick, imagemagick-6.defaultquantum
Depends: libc6 (>= 2.34), libmagickcore-6.q16-6 (>= 8:6.9.10.2), libmagickwand-6.q16-6 (>= 8:6.9.10.2), hicolor-icon-theme
Recommends: libmagickcore-6.q16-6-extra, ghostscript, netpbm
Suggests: imagemagick-doc, autotrace, cups-bsd | lpr | lprng, curl, enscript, ffmpeg, gimp, gnuplot, grads, graphviz, groff-base, hp2xx, html2ps, libwmf-bin, mplayer, povray, radiance, sane-utils, texlive-base-bin, transfig, ufraw-batch, xdg-utils
Breaks: libmagickcore-dev (<< 8:6.9.2.10+dfsg-2~)
Description: image manipulation programs -- quantum depth Q16
 ImageMagick is a software suite to create, edit, and compose bitmap images.
 It can read, convert and write images in a variety of formats (over 100)
 including DPX, EXR, GIF, JPEG, JPEG-2000, PDF, PhotoCD, PNG, Postscript,
 SVG, and TIFF. Use ImageMagick to translate, flip, mirror, rotate, scale,
 shear and transform images, adjust image colors, apply various special
 effects, or draw text, lines, polygons, ellipses and Bézier curves.
 All manipulations can be achieved through shell commands as well as through
 an X11 graphical interface (display).
 .
 For working with the SVG, WMF, OpenEXR, DjVu and Graphviz formats,
 you need to install the libmagickcore-6.q16-6-extra package.
 .
 This version of imagemagick is compiled for a channel
 depth of 16 bits (Q16).
Homepage: https://www.imagemagick.org/

Package: imagemagick-7-common
Status: install ok installed
Priority: optional
Section: graphics
Installed-Size: 468
Maintainer: ImageMagick Packaging Team <pkg-gmagick-im-team@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: imagemagick
Version: 8:7.1.1.43+dfsg1-1+deb13u12
Replaces: imagemagick-6-common (<< 8:7.0.0-1~), imagemagick-common (<< 8:6.9.12.98+dfsg1-1~)
Provides: imagemagick-6-common (= 8:7.1.1.43+dfsg1-1+deb13u12), imagemagick-common (= 8:7.1.1.43+dfsg1-1+deb13u12)
Breaks: imagemagick-6-common (<< 8:7.0.0-1~), imagemagick-common (<< 8:6.9.12.98+dfsg1-1~)
Conffiles:
 /etc/ImageMagick-7/colors.xml 7a58fb76b799bf829c55eecd08db28c2
 /etc/ImageMagick-7/delegates.xml fd0d19e16ca3eeac88109d3b4eaaaddd
 /etc/ImageMagick-7/log.xml 29c0a0702c3729fec215ce53438eb608
 /etc/ImageMagick-7/mime.xml 38997fbb930f4a344b0f755278863931
 /etc/ImageMagick-7/policy.xml 2205eb7b44d24afed7a53583c5bd42c1
 /etc/ImageMagick-7/quantization-table.xml 948aa1faac66b697266eaa55e8a052e5
 /etc/ImageMagick-7/thresholds.xml 88370f6d426e50628949a43a71d1398a
 /etc/ImageMagick-7/type-apple.xml 94aac3cbd6fdb6ccf338e8e60c3a6fcc
 /etc/ImageMagick-7/type-dejavu.xml fdb9405e0c0f1f729e6b62cb2f4c9f55
 /etc/ImageMagick-7/type-ghostscript.xml e283f0f7916ca637a6bcb713f754d9be
 /etc/ImageMagick-7/type-urw-base35-type1.xml 97b3389352c8e35aec41bbcc646ac837
 /etc/ImageMagick-7/type-urw-base35.xml 857d7928b3ec119f6374e2a856f65290
 /etc/ImageMagick-7/type-windows.xml 3a8000b7f83d4108e7c3024c1bcc403c
 /etc/ImageMagick-7/type.xml dc579c4388d995a444490ad5de853a2f
Description: image manipulation programs -- infrastructure
 imagemagick-common contains the filesystem infrastructure required for
 further installation of imagemagick in any configuration; it does not provide
 a full installation of binaries, libraries, and utilities
 required to run imagemagick.
 .
 This package is independent of channel depth.
Homepage: https://www.imagemagick.org/

Package: imagemagick-7.q16
Status: install ok installed
Priority: optional
Section: graphics
Installed-Size: 853
Maintainer: ImageMagick Packaging Team <pkg-gmagick-im-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: imagemagick
Version: 8:7.1.1.43+dfsg1-1+deb13u12
Replaces: imagemagick (<< 8:6.9.2.10+dfsg-2~)
Provides: imagemagick, imagemagick-7.defaultquantum (= 8:7.1.1.43+dfsg1-1+deb13u12)
Depends: libc6 (>= 2.34), libmagickcore-7.q16-10 (>= 8:7.1.1.21), libmagickwand-7.q16-10 (>= 8:7.1.1.21), hicolor-icon-theme
Recommends: libmagickcore-7.q16-10-extra, ghostscript, netpbm
Suggests: imagemagick-7-doc, autotrace, cups-bsd | lpr | lprng, curl, enscript, ffmpeg, gimp, gnuplot, grads, graphviz, groff-base, hp2xx, html2ps, libwmf-bin, mplayer, povray, radiance, sane-utils, texlive-base-bin, transfig, libraw-bin, xdg-utils
Breaks: libmagickcore-dev (<< 8:6.9.2.10+dfsg-2~)
Description: image manipulation programs -- quantum depth Q16
 ImageMagick is a software suite to create, edit, and compose bitmap images.
 It can read, convert and write images in a variety of formats (over 100)
 including DPX, EXR, GIF, JPEG, JPEG-2000, PDF, PhotoCD, PNG, Postscript,
 SVG, and TIFF. Use ImageMagick to translate, flip, mirror, rotate, scale,
 shear and transform images, adjust image colors, apply various special
 effects, or draw text, lines, polygons, ellipses and Bézier curves.
 All manipulations can be achieved through shell commands as well as through
 an X11 graphical interface (display).
 .
 For working with the SVG, WMF, OpenEXR, DjVu and Graphviz formats,
 you need to install the libmagickcore-7.q16-10-extra package.
 .
 This version of imagemagick is compiled for a channel
 depth of 16 bits (Q16).
Homepage: https://www.imagemagick.org/

Package: init
Protected: yes
Status: install ok installed
Priority: important
Section: metapackages
Installed-Size: 17
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: init-system-helpers
Version: 1.69~deb13u1
Pre-Depends: systemd-sysv | sysvinit-core
Description: metapackage ensuring an init system is installed
 This package is a metapackage which allows you to select from the available
 init systems while ensuring that one of these is available on the system at
 all times.
Important: yes

Package: init-system-helpers
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 133
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.69~deb13u1
Description: helper tools for all init systems
 This package contains helper tools that are necessary for switching between
 the various init systems that Debian contains (e. g. sysvinit or
 systemd). An example is deb-systemd-helper, a script that enables systemd unit
 files without depending on a running systemd.
 .
 It also includes the "service", "invoke-rc.d", and "update-rc.d" scripts which
 provide an abstraction for enabling, disabling, starting, and stopping
 services for all supported Debian init systems as specified by the policy.
 .
 While this package is maintained by pkg-systemd-maintainers, it is NOT
 specific to systemd at all. Maintainers of other init systems are welcome to
 include their helpers in this package.

Package: initramfs-tools
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 52
Maintainer: Debian kernel team <debian-kernel@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.148.4
Provides: linux-initramfs-tool
Depends: initramfs-tools-core (= 0.148.4), linux-base
Suggests: bash-completion
Conflicts: linux-initramfs-tool
Conffiles:
 /etc/initramfs-tools/update-initramfs.conf e2026d4603e7161efaccca519aeb1297
 /etc/kernel/postinst.d/initramfs-tools acdcb03834b59261f917ae04ddc3fe6e
 /etc/kernel/postrm.d/initramfs-tools 90fb918898fffccddcbdaef13bf13b2a
Description: generic modular initramfs generator (automation)
 This package builds a bootable initramfs for Linux kernel packages.  The
 initramfs is loaded along with the kernel and is responsible for
 mounting the root filesystem and starting the main init system.

Package: initramfs-tools-bin
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 44
Maintainer: Debian kernel team <debian-kernel@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: initramfs-tools
Version: 0.148.4
Replaces: initramfs-tools-core (<< 0.148~)
Depends: libc6 (>= 2.34)
Breaks: initramfs-tools-core (<< 0.148~)
Description: generic modular initramfs generator (binary tools)
 This package contains the unmkinitramfs program that can be used to
 unpack an initramfs image.

Package: initramfs-tools-core
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 166
Maintainer: Debian kernel team <debian-kernel@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: initramfs-tools
Version: 0.148.4
Depends: coreutils (>= 8.24), cpio (>= 2.12), dracut-install, initramfs-tools-bin (>= 0.148.4), klibc-utils (>= 2.0.4-8~), kmod, logsave | e2fsprogs (<< 1.45.3-1~), udev
Recommends: zstd, busybox | busybox-static
Suggests: bash-completion
Breaks: miniramfs (<< 1.0.3~)
Conffiles:
 /etc/initramfs-tools/initramfs.conf 7cd32817dcb81991da2e2a928a32fdb0
Description: generic modular initramfs generator (core tools)
 This package contains the mkinitramfs program that can be used to
 create a bootable initramfs for a Linux kernel.  The initramfs should
 be loaded along with the kernel and is then responsible for mounting
 the root filesystem and starting the main init system.

Package: inotify-tools
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 161
Maintainer: Joao Eriberto Mota Filho <eriberto@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: inotify-tools (4.23.9.0-2)
Version: 4.23.9.0-2+b1
Depends: libc6 (>= 2.38), libinotifytools0 (>= 4.23.8.0)
Description: command-line programs providing a simple interface to inotify
 inotify (inode notify) is a Linux kernel subsystem that monitors events in
 filesystems and reports those events to applications in real time via API.
 .
 inotify can be used to monitor individual files or directories. When a
 directory is monitored, inotify will return events for the directory itself
 and for files inside the directory.
 .
 inotify-tools is a set of command-line programs for Linux providing a simple
 interface to inotify. These programs can be used to monitor and act upon
 filesystem events. inotify-tools consists of four utilities: inotifywait,
 inotifywatch, fsnotifywait and fsnotifywatch.
 .
 inotifywait efficiently waits for changes to files, making it appropriate
 for use in shell scripts.
 .
 inotifywatch collects filesystem usage statistics and outputs counts of each
 inotify event.
 .
 fsnotifywait and fsnotifywatch are similar to inotifywait and inotifywatch,
 but they are using Linux's fanotify(7) interface by default. The fanotify API
 also provides notification and interception of filesystem events. Additional
 capabilities compared to the inotify(7) API include the ability to monitor
 all of the objects in a mounted filesystem, the ability to make access
 permission decisions, and the possibility to read or modify files before
 access by other applications.
 .
 inotify-tools is also useful for security activities in firewall systems or
 to detect changes and injections of new files in webservers by intruders.
Homepage: https://github.com/rvoicilas/inotify-tools/wiki/

Package: intel-media-va-driver
Status: install ok installed
Priority: optional
Section: video
Installed-Size: 17751
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: intel-media-driver
Version: 25.2.3+dfsg1-1
Provides: va-driver
Depends: libva-driver-abi-1.22, libc6 (>= 2.38), libgcc-s1 (>= 3.0), libigdgmm12 (>= 22.7.2+ds1), libstdc++6 (>= 14)
Description: VAAPI driver for the Intel GEN8+ Graphics family
 The VA-API (Video Acceleration API) enables hardware accelerated video
 decode/encode at various entry-points (VLD, IDCT, Motion Compensation
 etc.) for the prevailing coding standards today (MPEG-2, MPEG-4
 ASP/H.263, MPEG-4 AVC/H.264, and VC-1/WMV3). It provides an interface
 to fully expose the video decode capabilities in today's GPUs.
 .
 This package contains the video decode and encode driver backend for
 the Intel HD Graphics of the Intel Core processor family. The supported
 platforms include:
  * Broadwell
  * Skylake
  * Broxton
  * Apollo Lake
  * Kaby Lake
  * Coffee Lake
  * Whiskey Lake
  * Cannon Lake
  * Ice Lake
 .
 Only a limited set of encoders is available via this driver: JPEG
 (Skylake and newer), AVC (Boxton and newer), HEVC and VP9 (Ice Lake and
 newer). Media shaders are only available on Ice Lake and newer.
Homepage: https://github.com/intel/media-driver

Package: iotop
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 108
Maintainer: Paul Wise <pabs@debian.org>
Architecture: amd64
Source: iotop (0.6-42-ga14256a-0.3)
Version: 0.6-42-ga14256a-0.3+b1
Depends: python3 (<< 3.14), python3 (>= 3.13~), python3:any
Description: simple top-like I/O monitor
 iotop does for I/O usage what top(1) does for CPU usage. It watches I/O
 usage information output by the Linux kernel and displays a table of
 current I/O usage by processes on the system. It is handy for answering
 the question "Why is the disk churning so much?".
 .
 iotop can only run under a Linux 2.6.20 or later kernel built with the
 CONFIG_TASKSTATS, CONFIG_TASK_DELAY_ACCT, CONFIG_TASK_IO_ACCOUNTING and
 CONFIG_VM_EVENT_COUNTERS build config options on.
Homepage: http://guichaz.free.fr/iotop/

Package: iproute2
Status: install ok installed
Priority: important
Section: net
Installed-Size: 3774
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 6.15.0-1
Replaces: iproute2-doc
Provides: arpd
Depends: debconf (>= 0.5) | debconf-2.0, libbpf1 (>= 1:0.6.0), libc6 (>= 2.38), libcap2 (>= 1:2.10), libdb5.3t64, libelf1t64 (>= 0.131), libmnl0 (>= 1.0.3-4~), libselinux1 (>= 3.1~), libtirpc3t64 (>= 1.0.2), libxtables12 (>= 1.6.0+snapshot20161117), libcap2-bin
Suggests: python3:any
Breaks: iproute2-doc
Conflicts: arpd
Description: networking and traffic control tools
 The iproute2 suite is a collection of utilities for networking and
 traffic control.
 .
 These tools communicate with the Linux kernel via the (rt)netlink
 interface, providing advanced features not available through the
 legacy net-tools commands 'ifconfig' and 'route'.
Homepage: https://wiki.linuxfoundation.org/networking/iproute2

Package: ipset
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 140
Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>
Architecture: amd64
Source: ipset (7.22-1)
Version: 7.22-1+b1
Provides: ipset-7.22
Depends: libc6 (>= 2.34), libipset13t64 (>= 7.15-1~)
Recommends: iptables
Breaks: xtables-addons-common (<< 1.41~)
Description: administration tool for kernel IP sets
 IP sets are a framework inside the Linux 2.4.x and 2.6.x kernel which can be
 administered by the ipset(8) utility. Depending on the type, currently an
 IP set may store IP addresses, (TCP/UDP) port numbers or IP addresses with
 MAC addresses in a  way which ensures lightning speed when matching an
 entry against a set.
 .
 If you want to
 .
  * store multiple IP addresses or port numbers and match against the
    entire collection using a single iptables rule.
  * dynamically update iptables rules against IP addresses or ports without
    performance penalty.
  * express complex IP address and ports based rulesets with a single
    iptables rule and benefit from the speed of IP sets.
 .
 then IP sets may be the proper tool for you.
Homepage: https://ipset.netfilter.org/

Package: iptables
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 2406
Maintainer: Debian Netfilter Packaging Team <team+pkg-netfilter-team@tracker.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.8.11-2
Depends: libip4tc2 (= 1.8.11-2), libip6tc2 (= 1.8.11-2), libxtables12 (= 1.8.11-2), netbase (>= 6.0), libc6 (>= 2.38), libmnl0 (>= 1.0.3-4~), libnetfilter-conntrack3 (>= 1.0.6), libnfnetlink0 (>= 1.0.2), libnftnl11 (>= 1.1.6)
Recommends: nftables
Suggests: firewalld, kmod
Description: administration tools for packet filtering and NAT
 The iptables/xtables framework has been replaced by nftables. You should
 consider migrating now.
 .
 iptables is the userspace command line program used to configure
 the Linux packet filtering and NAT ruleset. It is targeted towards systems
 and networks administrators.
 .
 This package contains several different utilities, the most important ones:
 .
 iptables-nft, iptables-nft-save, iptables-nft-restore (nft-based version)
 .
 iptables-legacy, iptables-legacy-save, iptables-legacy-restore (legacy version)
 .
 ip6tables-nft, ip6tables-nft-save, ip6tables-nft-restore (nft-based version)
 .
 ip6tables-legacy, ip6tables-legacy-save, ip6tables-legacy-restore (legacy
 version)
 .
 arptables-nft, arptables-nft-save, arptables-nft-restore (nft-based version)
 .
 ebtables-nft, ebtables-nft-save, ebtables-nft-restore (nft-based version)
Homepage: https://www.netfilter.org/

Package: iputils-ping
Status: install ok installed
Priority: important
Section: net
Installed-Size: 187
Maintainer: Noah Meyerhans <noahm@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: iputils
Version: 3:20240905-3
Provides: ping
Depends: libc6 (>= 2.38), libcap2 (>= 1:2.10), libidn2-0 (>= 0.6)
Recommends: linux-sysctl-defaults
Description: Tools to test the reachability of network hosts
 The ping command sends ICMP ECHO_REQUEST packets to a host in order to
 test if the host is reachable via the network.
 .
 This package includes a ping6 utility which supports IPv6 network
 connections.
Homepage: https://github.com/iputils/iputils/

Package: isc-dhcp-client
Status: install ok installed
Priority: important
Section: net
Installed-Size: 2884
Maintainer: Debian ISC DHCP Maintainers <isc-dhcp@packages.debian.org>
Architecture: amd64
Source: isc-dhcp
Version: 4.4.3-P1-8
Provides: dhcp-client
Depends: libc6 (>= 2.38), debianutils (>= 2.8.2), iproute2
Recommends: isc-dhcp-common
Suggests: resolvconf, avahi-autoipd, isc-dhcp-client-ddns
Conflicts: isc-dhcp-client-ddns (<< 4.4.3-P1-4.1)
Conffiles:
 /etc/apparmor.d/usr.sbin.dhclient 086451165ca0fa9290b556260ba6d7fe
 /etc/dhcp/debug 521717b5f9e08db15893d3d062c59aeb
 /etc/dhcp/dhclient-enter-hooks.d/resolved-enter 4ecfd14e38e7362cd6aeb3e438c2ec43
 /etc/dhcp/dhclient-exit-hooks.d/resolved 716b09be4007df8a828a1af7b37baefc
 /etc/dhcp/dhclient-exit-hooks.d/rfc3442-classless-routes 95e21c32fa7f603db75f1dc33db53cf5
 /etc/dhcp/dhclient.conf 649563ef7a61912664a400a5263958a6
Description: DHCP client for automatically obtaining an IP address (deprecated)
 This is the Internet Software Consortium's DHCP client.
 .
 Dynamic Host Configuration Protocol (DHCP) is a protocol like BOOTP
 (actually dhcpd includes much of the functionality of bootpd). It
 gives client machines "leases" for IP addresses and can
 automatically set their network configuration. If your machine
 depends on DHCP (especially likely if it's a workstation on a large
 network, or a laptop, or attached to a cable modem), keep this or
 another DHCP client installed.
 .
 Extra documentation can be found in the package isc-dhcp-common.
 .
 ISC has decided to stop maintaining the client and relay parts of isc-dhcp,
 and they will be removed after the 4.4.3 release, keeping only the server
 component. Please, consider using an alternative for isc-dhcp-client
 (dhclient).
 .
 More information can be found in the ISC official announcement:
 https://www.isc.org/blogs/dhcp-client-relay-eom/
 .
 ISC has deprecated the DHCP project. See:
 https://www.isc.org/blogs/isc-dhcp-eol/.
Homepage: http://www.isc.org

Package: klibc-utils
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 479
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: klibc
Version: 2.0.14-1
Depends: libklibc (= 2.0.14-1)
Description: small utilities built with klibc for early boot
 This package contains a collection of programs that are linked
 against klibc. These duplicate some of the functionality of a
 regular Linux toolset, but are typically much smaller than their
 full-function counterparts.  They are intended for inclusion in
 initramfs images and embedded systems.
Homepage: https://git.kernel.org/cgit/libs/klibc/klibc.git

Package: kmod
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 255
Maintainer: Marco d'Itri <md@linux.it>
Architecture: amd64
Multi-Arch: foreign
Version: 34.2-2
Replaces: bash-completion (<< 1:2.16.0-1)
Depends: libc6 (>= 2.38), libssl3t64 (>= 3.0.0), libkmod2 (= 34.2-2)
Breaks: bash-completion (<< 1:2.16.0-1)
Description: tools for managing Linux kernel modules
 This package contains a set of programs for loading, inserting, and
 removing kernel modules for Linux.
 It replaces module-init-tools.

Package: less
Status: install ok installed
Priority: important
Section: text
Installed-Size: 376
Maintainer: Milan Kupcevic <milan@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 668-1
Depends: libc6 (>= 2.34), libtinfo6 (>= 6)
Description: pager program similar to more
 This package provides "less", a file pager (that is, a memory-efficient
 utility for displaying text one screenful at a time). Less has many
 more features than the basic pager "more". As part of the GNU project,
 it is widely regarded as the standard pager on UNIX-derived systems.
 .
 Also provided are "lessecho", a simple utility for ensuring arguments
 with spaces are correctly quoted; "lesskey", a tool for modifying the
 standard (vi-like) keybindings; and "lesspipe", a filter for specific
 types of input, such as .doc or .txt.gz files.
Homepage: http://www.greenwoodsoftware.com/less/

Package: libaacs0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 150
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libaacs (0.11.1-4)
Version: 0.11.1-4+b1
Depends: libc6 (>= 2.33), libgcrypt20 (>= 1.11.0)
Recommends: libbdplus0
Enhances: libbluray2
Description: free-and-libre implementation of AACS
 libaacs is a research project to implement the Advanced Access Content
 System specification. It provides, through an open-source library, a
 way to understand how the AACS works.
 .
 This package DOES NOT provide any key or certificate that could be used
 to decode encrypted copyrighted material. It is based on the official
 public AACS specification only.
 .
 This package provides the shared library.
Homepage: https://www.videolan.org/developers/libaacs.html

Package: libabsl20220623
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1913
Maintainer: Benjamin Barenblat <bbaren@debian.org>
Architecture: amd64
Multi-Arch: same
Source: abseil
Version: 20220623.1-1+deb12u2
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libstdc++6 (>= 11)
Description: extensions to the C++ standard library
 Abseil is an open-source collection of C++ library code designed to augment the
 C++ standard library. The Abseil library code is collected from Google's C++
 codebase and has been extensively tested and used in production. In some cases,
 Abseil provides pieces missing from the C++ standard; in others, Abseil
 provides alternatives to the standard for special needs.
 .
 This package contains Abseil's shared libraries.
Homepage: https://abseil.io/

Package: libabsl20240722
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2561
Maintainer: Benjamin Barenblat <bbaren@debian.org>
Architecture: amd64
Multi-Arch: same
Source: abseil
Version: 20240722.0-4
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.4), libstdc++6 (>= 13.1)
Description: extensions to the C++ standard library
 Abseil is an open-source collection of C++ library code designed to augment the
 C++ standard library. The Abseil library code is collected from Google's C++
 codebase and has been extensively tested and used in production. In some cases,
 Abseil provides pieces missing from the C++ standard; in others, Abseil
 provides alternatives to the standard for special needs.
 .
 This package contains Abseil's shared libraries.
Homepage: https://abseil.io/

Package: libacl1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 74
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: amd64
Multi-Arch: same
Source: acl (2.3.2-2)
Version: 2.3.2-2+b1
Depends: libc6 (>= 2.38)
Description: access control list - shared library
 This package contains the shared library containing the POSIX 1003.1e
 draft standard 17 functions for manipulating access control lists.
Homepage: https://savannah.nongnu.org/projects/acl/

Package: libaio1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 37
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libaio
Version: 0.3.113-4
Depends: libc6 (>= 2.4)
Description: Linux kernel AIO access library - shared library
 This library enables userspace to use Linux kernel asynchronous I/O
 system calls, important for the performance of databases and other
 advanced applications.
 .
 This package contains the shared library.
Homepage: https://pagure.io/libaio

Package: libaio1t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 39
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libaio (0.3.113-8)
Version: 0.3.113-8+b1
Depends: libc6 (>= 2.4)
Description: Linux kernel AIO access library - shared library
 This library enables userspace to use Linux kernel asynchronous I/O
 system calls, important for the performance of databases and other
 advanced applications.
 .
 This package contains the shared library.
Homepage: https://pagure.io/libaio

Package: libalgorithm-diff-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 129
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.201-1
Depends: perl:any
Recommends: libalgorithm-diff-xs-perl
Description: module to find differences between files
 Algorithm::Diff is a Perl module that allows users to analyze text based on a
 Longest Common Subsequence (LCS) algorithm. It can compare two files and find
 the differences between them, which can produce the same information as the
 common Unix tool 'diff'.
 .
 There is an XS-optimized implementation of the core loop, which accelerates
 some types of diff output (see libalgorithm-diff-xs-perl).
Homepage: https://metacpan.org/release/Algorithm-Diff

Package: libalgorithm-diff-xs-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 46
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Version: 0.04-9
Depends: perl (>= 5.40.1-2), perlapi-5.40.1, libc6 (>= 2.14), libalgorithm-diff-perl
Description: module to find differences between files (XS accelerated)
 Algorithm::Diff::XS is a Perl diff utility module based on Joe Schaefer's
 excellent but not very well-known Algorithm::LCS module, with a drop-in
 interface identical to Algorithm::Diff.
 .
 Note that only the LCSidx function is optimized in XS at the moment, which
 means only compact_diff will get significantly faster for large data sets,
 while diff and sdiff will run in identical speed as Algorithm::Diff.
Homepage: https://metacpan.org/release/Algorithm-Diff-XS

Package: libalgorithm-merge-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 43
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.08-5
Depends: perl:any, libalgorithm-diff-perl
Description: Perl module for three-way merge of textual data
 Algorithm::Merge provides three-way merge and diff functions, complementing
 the functionality offered by Algorithm::Diff (libalgorithm-diff-perl). Given
 three sets of items, known as the original, left and right, this module can
 take a three-way difference or merge them. Taking a difference provides an
 array reference that is very similar to the behaviour of Algorithm::Diff. One
 can also implement custom conflict resolution using the CONFLICT callback.
Homepage: https://metacpan.org/release/Algorithm-Merge

Package: libaom-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 8584
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: aom
Version: 3.12.1-1+deb13u1
Depends: libaom3 (= 3.12.1-1+deb13u1)
Description: AV1 Video Codec Library -- Development Files
 AOMedia Video 1 (AV1) is an open and royalty free video encoding format
 optimized for the Internet and the successor of VP9. aom is the
 reference encoder and decoder implementation published by the Alliance
 for Open Media.
 .
 This package contains the development files.
Homepage: https://aomedia.googlesource.com/aom/

Package: libaom3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 5579
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: aom
Version: 3.12.1-1+deb13u1
Depends: libc6 (>= 2.34)
Description: AV1 Video Codec Library
 AOMedia Video 1 (AV1) is an open and royalty free video encoding format
 optimized for the Internet and the successor of VP9. aom is the
 reference encoder and decoder implementation published by the Alliance
 for Open Media.
 .
 This package contains the shared library.
Homepage: https://aomedia.googlesource.com/aom/

Package: libapache2-mod-php8.2
Status: deinstall ok config-files
Priority: optional
Section: httpd
Installed-Size: 5474
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.34-1~deb12u1
Config-Version: 8.2.34-1~deb12u1
Provides: libapache2-mod-php, php-json, php8.2-json, phpapi-20220829
Depends: libmagic1, media-types | mime-support, php8.2-cli, php8.2-common (= 8.2.34-1~deb12u1), php8.2-opcache, tzdata, ucf, apache2-api-20120211, apache2-bin (>= 2.4.16), libargon2-1 (>= 0~20171227), libc6 (>= 2.35), libpcre2-8-0 (>= 10.32), libsodium23 (>= 1.0.18), libssl3 (>= 3.0.0), libxml2 (>= 2.8.0), zlib1g (>= 1:1.1.4)
Recommends: apache2
Suggests: php-pear
Conffiles:
 /etc/apache2/mods-available/php8.2.conf 002a0a2a5863242ae11e2d2d4dfcafe4
 /etc/apache2/mods-available/php8.2.load c68f6273d32f252336bd75585aec958e
Description: server-side, HTML-embedded scripting language (Apache 2 module)
 This package provides the PHP module for the Apache 2 webserver (as
 found in the apache2-mpm-prefork package).  Please note that this package
 ONLY works with Apache's prefork MPM, as it is not compiled thread-safe.
 .
 The following extensions are built in: Core date filter hash json libxml
 openssl pcre random Reflection session sodium SPL standard zlib.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: libapache2-mod-php8.4
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 5880
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.4
Version: 8.4.26-1~deb13u1
Provides: libapache2-mod-php, php-json, php8.4-json, phpapi-20240924
Depends: media-types | mime-support, php8.4-cli, php8.4-common (= 8.4.26-1~deb13u1), php8.4-opcache, tzdata, ucf, apache2-api-20120211, apache2-bin (>= 2.4.16), libargon2-1 (>= 0~20171227), libc6 (>= 2.38), libpcre2-8-0 (>= 10.32), libsodium23 (>= 1.0.18), libssl3t64 (>= 3.0.0), libxml2 (>= 2.9.4), zlib1g (>= 1:1.1.4)
Recommends: apache2
Suggests: php-pear
Conffiles:
 /etc/apache2/mods-available/php8.4.conf 002a0a2a5863242ae11e2d2d4dfcafe4
 /etc/apache2/mods-available/php8.4.load d937f2aece88b695ccacb4e4a086e2bc
Description: server-side, HTML-embedded scripting language (Apache 2 module)
 This package provides the PHP module for the Apache 2 webserver (as
 found in the apache2-mpm-prefork package).  Please note that this package
 ONLY works with Apache's prefork MPM, as it is not compiled thread-safe.
 .
 The following extensions are built in: Core date filter hash json libxml
 openssl pcre random Reflection session sodium SPL standard zlib.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: libapparmor1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 115
Maintainer: Debian AppArmor Team <pkg-apparmor-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: apparmor
Version: 4.1.0-1
Replaces: libapparmor-perl (<< 3.0.3-3)
Depends: libc6 (>= 2.38)
Breaks: libapparmor-perl (<< 3.0.3-3)
Description: changehat AppArmor library
 libapparmor1 provides a shared library one can compile programs
 against in order to use various AppArmor functionality,
 such as transitioning to a different AppArmor profile or hat.
Homepage: https://apparmor.net/

Package: libapr1t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 301
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: apr
Version: 1.7.5-1
Replaces: libapr1
Provides: libapr1 (= 1.7.5-1)
Depends: libc6 (>= 2.38), libuuid1 (>= 2.16)
Breaks: libapr1 (<< 1.7.5-1)
Conflicts: libapr1.0
Description: Apache Portable Runtime Library
 APR is Apache's Portable Runtime Library, designed to be a support library
 that provides a predictable and consistent interface to underlying
 platform-specific implementations.
Homepage: https://apr.apache.org/

Package: libaprutil1-dbd-sqlite3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 48
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: apr-util
Version: 1.6.3-3+deb13u1
Depends: libaprutil1t64 (= 1.6.3-3+deb13u1), libc6 (>= 2.38), libsqlite3-0 (>= 3.5.9)
Description: Apache Portable Runtime Utility Library - SQLite3 Driver
 APR is Apache's Portable Runtime Library, designed to be a support library
 that provides a predictable and consistent interface to underlying
 platform-specific implementations.
 .
 APR Util is a utilities library implemented on top of apr, providing database
 access, xml parsing, and other useful functionality.
 .
 This package contains the SQLite3 database driver.
Homepage: https://apr.apache.org/

Package: libaprutil1-ldap
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 40
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: apr-util
Version: 1.6.3-3+deb13u1
Depends: libaprutil1t64 (= 1.6.3-3+deb13u1), libc6 (>= 2.4), libldap2 (>= 2.6.2)
Description: Apache Portable Runtime Utility Library - LDAP Driver
 APR is Apache's Portable Runtime Library, designed to be a support library
 that provides a predictable and consistent interface to underlying
 platform-specific implementations.
 .
 APR Util is a utilities library implemented on top of apr, providing database
 access, xml parsing, and other useful functionality.
 .
 This package contains the LDAP driver.
Homepage: https://apr.apache.org/

Package: libaprutil1t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 284
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: apr-util
Version: 1.6.3-3+deb13u1
Replaces: libaprutil1
Provides: libaprutil1 (= 1.6.3-3+deb13u1)
Depends: libapr1t64 (>= 1.6.2), libc6 (>= 2.38), libcrypt1 (>= 1:4.1.0), libdb5.3t64, libexpat1 (>= 2.0.1), libgdbm6t64 (>= 1.16), libssl3t64 (>= 3.0.0)
Breaks: libaprutil1 (<< 1.6.3-3+deb13u1)
Description: Apache Portable Runtime Utility Library
 APR is Apache's Portable Runtime Library, designed to be a support library
 that provides a predictable and consistent interface to underlying
 platform-specific implementations.
 .
 APR Util is a utilities library implemented on top of apr, providing database
 access, xml parsing, and other useful functionality.
Homepage: https://apr.apache.org/

Package: libapt-pkg6.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3297
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: apt
Version: 2.6.1
Provides: libapt-pkg (= 2.6.1)
Depends: libbz2-1.0, libc6 (>= 2.34), libgcc-s1 (>= 3.0), libgcrypt20 (>= 1.10.0), liblz4-1 (>= 0.0~r127), liblzma5 (>= 5.1.1alpha+20120614), libstdc++6 (>= 11), libsystemd0 (>= 221), libudev1 (>= 183), libxxhash0 (>= 0.7.1), libzstd1 (>= 1.5.2), zlib1g (>= 1:1.2.2.3)
Recommends: apt (>= 2.6.1)
Breaks: appstream (<< 0.9.0-3~), apt (<< 1.6~), aptitude (<< 0.8.9), dpkg (<< 1.20.8), libapt-inst1.5 (<< 0.9.9~)
Description: package management runtime library
 This library provides the common functionality for searching and
 managing packages as well as information about packages.
 Higher-level package managers can depend upon this library.
 .
 This includes:
  * retrieval of information about packages from multiple sources
  * retrieval of packages and all dependent packages
    needed to satisfy a request either through an internal
    solver or by interfacing with an external one
  * authenticating the sources and validating the retrieved data
  * installation and removal of packages in the system
  * providing different transports to retrieve data over cdrom, ftp,
    http(s), rsh as well as an interface to add more transports like
    tor+http(s) (apt-transport-tor).

Package: libapt-pkg7.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3855
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: apt
Version: 3.0.3
Provides: libapt-pkg (= 3.0.3)
Depends: libbz2-1.0, libc6 (>= 2.38), libgcc-s1 (>= 3.0), liblz4-1 (>= 0.0~r127), liblzma5 (>= 5.1.1alpha+20120614), libssl3t64 (>= 3.0.0), libstdc++6 (>= 14), libsystemd0 (>= 221), libudev1 (>= 183), libxxhash0 (>= 0.8), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.2.2.3)
Recommends: apt (>= 3.0.3)
Breaks: appstream (<< 0.9.0-3~), apt (<< 1.6~), aptitude (<< 0.8.9), dpkg (<< 1.20.8), libapt-inst1.5 (<< 0.9.9~)
Conflicts: libnettle8 (<< 3.9.1-2.2~)
Description: package management runtime library
 This library provides the common functionality for searching and
 managing packages as well as information about packages.
 Higher-level package managers can depend upon this library.
 .
 This includes:
  * retrieval of information about packages from multiple sources
  * retrieval of packages and all dependent packages
    needed to satisfy a request either through an internal
    solver or by interfacing with an external one
  * authenticating the sources and validating the retrieved data
  * installation and removal of packages in the system
  * providing different transports to retrieve data over cdrom and
    http(s) as well as an interface to add more transports like
    tor+http(s) (apt-transport-tor).

Package: libarchive-zip-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 318
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.68-1
Depends: perl:any
Description: Perl module for manipulation of ZIP archives
 The Archive::Zip module allows a Perl program to create, manipulate,
 read, and write Zip archive files.
 .
 Zip archives can be created, or you can read from existing zip files.
 Once created, they can be written to files, streams, or strings.
 .
 Members can be added, removed, extracted, replaced, rearranged, and
 enumerated.  They can also be renamed or have their dates, comments,
 or other attributes queried or modified.  Their data can be
 compressed or uncompressed as needed.  Members can be created from
 members in existing Zip files, or from existing directories, files,
 or strings.
Homepage: https://metacpan.org/release/Archive-Zip

Package: libargon2-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 58
Maintainer: Debian Security Tools <team+pkg-security@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: argon2 (0~20190702+dfsg-4)
Version: 0~20190702+dfsg-4+b2
Depends: libc6 (>= 2.34)
Breaks: cryptsetup-initramfs (<< 2:2.6.1-2)
Description: memory-hard hashing function - runtime library
 Argon2 is a password-hashing function that can be used to hash passwords
 for credential storage, key derivation, or other applications.
 .
 There are two main versions of Argon2: Argon2i and Argon2d.
 Argon2i is the safest against side-channel attacks, while Argon2d provides
 the highest resistance against GPU cracking attacks.
 .
 Argon2i and Argon2d are parametrized by:
  * A time cost, which defines the amount of computation realized and
    therefore the execution time, given in number of iterations
  * A memory cost, which defines the memory usage, given in kibibytes
  * A parallelism degree, which defines the number of parallel threads
 .
 This package includes the dynamic library against which programs are linked.
Homepage: https://github.com/P-H-C/phc-winner-argon2

Package: libasan8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 10695
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-14
Version: 14.2.0-19
Depends: gcc-14-base (= 14.2.0-19), libc6 (>= 2.34), libgcc-s1 (>= 3.3)
Description: AddressSanitizer -- a fast memory error detector
 AddressSanitizer (ASan) is a fast memory error detector.  It finds
 use-after-free and {heap,stack,global}-buffer overflow bugs in C/C++ programs.
Homepage: http://gcc.gnu.org/

Package: libasound2-data
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 197
Maintainer: Debian ALSA Maintainers <pkg-alsa-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: alsa-lib
Version: 1.2.14-1+deb13u1
Replaces: libasound2t64 (<< 1.2.14-1+deb13u1)
Recommends: alsa-ucm-conf, alsa-topology-conf
Suggests: alsa-utils
Breaks: libasound2t64 (<< 1.2.14-1+deb13u1)
Description: Configuration files and profiles for ALSA drivers
 This package contains configuration files for ALSA drivers.
 .
 ALSA is the Advanced Linux Sound Architecture.
Homepage: https://www.alsa-project.org/

Package: libasound2t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1265
Maintainer: Debian ALSA Maintainers <pkg-alsa-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: alsa-lib
Version: 1.2.14-1+deb13u1
Replaces: libasound2
Provides: libasound2 (= 1.2.14-1+deb13u1)
Depends: libasound2-data (>= 1.2.14-1+deb13u1), libc6 (>= 2.38)
Suggests: libasound2-plugins (>= 1.0.24)
Breaks: alsa-utils (<< 1.2.1), libasound2 (<< 1.2.14-1+deb13u1)
Description: shared library for ALSA applications
 This package contains the ALSA library and its standard plugins, as well
 as the required configuration files.
 .
 ALSA is the Advanced Linux Sound Architecture.
Homepage: https://www.alsa-project.org/

Package: libass9
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 286
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libass
Version: 1:0.17.3-1+deb13u1
Depends: libc6 (>= 2.38), libfontconfig1 (>= 2.13.0), libfreetype6 (>= 2.3.5), libfribidi0 (>= 1.0.0), libharfbuzz0b (>= 1.2.6), libunibreak6 (>= 1.0)
Description: library for SSA/ASS subtitles rendering
 SubStation Alpha (SSA) is a subtitle file format that allows more
 advanced subtitles than the conventional SRT and similar formats.
 .
 This package contains the shared library for libass.
Homepage: https://github.com/libass/libass

Package: libassuan0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 117
Maintainer: Debian GnuPG-Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libassuan
Version: 2.5.5-5
Depends: libc6 (>= 2.34), libgpg-error0 (>= 1.33)
Description: IPC library for the GnuPG components
 Libassuan is a small library implementing the so-called "Assuan
 protocol". This protocol is used for IPC between most newer GnuPG
 components. Both server and client side functions are provided.
Homepage: https://www.gnupg.org/related_software/libassuan/index.html

Package: libassuan9
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 136
Maintainer: Debian GnuPG-Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libassuan
Version: 3.0.2-2
Depends: libc6 (>= 2.38), libgpg-error0 (>= 1.33)
Description: IPC library for the GnuPG components
 Libassuan is a small library implementing the so-called "Assuan
 protocol". This protocol is used for IPC between most newer GnuPG
 components. Both server and client side functions are provided.
Homepage: https://www.gnupg.org/related_software/libassuan/index.html

Package: libasyncns0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 39
Maintainer: Tanguy Ortolo <tanguy+debian@ortolo.eu>
Architecture: amd64
Multi-Arch: same
Source: libasyncns (0.8-6)
Version: 0.8-6+b5
Depends: libc6 (>= 2.34)
Description: Asynchronous name service query library
 libasyncns is a C library for Linux/Unix for executing name service queries
 asynchronously. It is an asynchronous wrapper around getaddrinfo(3),
 getnameinfo(3), res_query(3) and res_search(3) from libc and libresolv.
Homepage: http://0pointer.de/lennart/projects/libasyncns/

Package: libatomic1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 45
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-14
Version: 14.2.0-19
Depends: gcc-14-base (= 14.2.0-19), libc6 (>= 2.14)
Description: support library providing __atomic built-in functions
 library providing __atomic built-in functions. When an atomic call cannot
 be turned into lock-free instructions, GCC will make calls into this library.
Homepage: http://gcc.gnu.org/

Package: libattr1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 60
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: amd64
Multi-Arch: same
Source: attr
Version: 1:2.5.2-3
Depends: libc6 (>= 2.4)
Conffiles:
 /etc/xattr.conf 743ca3f83ea263f1f56ad1f63f907bdb
Description: extended attribute handling - shared library
 Contains the runtime environment required by programs that make use
 of extended attributes.
Homepage: https://savannah.nongnu.org/projects/attr/

Package: libaudit-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 25
Maintainer: Laurent Bigonville <bigon@debian.org>
Architecture: all
Multi-Arch: foreign
Source: audit
Version: 1:4.0.2-2+deb13u1
Conffiles:
 /etc/libaudit.conf cdc703f9d27f0d980271a9e95d0f18b2
Description: Dynamic library for security auditing - common files
 The audit-libs package contains the dynamic libraries needed for
 applications to use the audit framework. It is used to monitor systems for
 security related events.
 .
 This package contains the libaudit.conf configuration file and the associated
 manpage.
Homepage: https://people.redhat.com/sgrubb/audit/

Package: libaudit1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 198
Maintainer: Laurent Bigonville <bigon@debian.org>
Architecture: amd64
Multi-Arch: same
Source: audit
Version: 1:4.0.2-2+deb13u1
Depends: libaudit-common (>= 1:4.0.2-2+deb13u1), libc6 (>= 2.38), libcap-ng0 (>= 0.7.9)
Description: Dynamic library for security auditing
 The audit-libs package contains the dynamic libraries needed for
 applications to use the audit framework. It is used to monitor systems for
 security related events.
Homepage: https://people.redhat.com/sgrubb/audit/

Package: libaugeas0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 599
Maintainer: Hilko Bengen <bengen@debian.org>
Architecture: amd64
Multi-Arch: same
Source: augeas
Version: 1.14.1-1.1~deb13u1
Depends: libc6 (>= 2.38), libselinux1 (>= 3.1~), libxml2 (>= 2.7.4), augeas-lenses
Suggests: augeas-tools
Description: Augeas configuration editing library and API
 Augeas is a configuration editing tool. It parses configuration files in their
 native formats and transforms them into a tree. Configuration changes are made
 by manipulating this tree and saving it back into native config files.
 .
 The transformation works very hard to preserve comments and formatting
 details. It is controlled by ``lens'' definitions that describe the file
 format and the transformation into a tree.
Homepage: http://augeas.net/

Package: libauthen-sasl-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 122
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2.1700-1
Depends: perl:any
Suggests: libdigest-hmac-perl, libgssapi-perl
Description: Authen::SASL - SASL Authentication framework
 SASL is a generic mechanism for authentication used by several network
 protocols. Authen::SASL provides an implementation framework that all
 protocols should be able to share.
 .
 The framework allows different implementations of the connection class
 to be plugged in. At the time of writing there were two such plugins:
  - Authen::SASL::Perl
    This module implements several mechanisms and is implemented
    entirely in Perl.
  - Authen::SASL::XS
    This module uses the Cyrus SASL C-library (both version 1 and 2 are
    supported).
  - Authen::SASL::Cyrus
    This module is the predecessor to Authen::SASL::XS. Until version 2.16,
    Authen::SASL::Cyrus was loaded as an alternative to Authen::SASL::XS.
Homepage: https://metacpan.org/release/Authen-SASL

Package: libavahi-client3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 119
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: avahi
Version: 0.8-16
Depends: libavahi-common3 (= 0.8-16), libc6 (>= 2.34), libdbus-1-3 (>= 1.10)
Description: Avahi client library
 Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
 It allows programs to publish and discover services and hosts
 running on a local network with no specific configuration. For
 example you can plug into a network and instantly find printers to
 print to, files to look at and people to talk to.
 .
 This package contains the library for Avahi's C API which  allows you
 to integrate mDNS/DNS-SD functionality into your application.
Homepage: https://avahi.org/

Package: libavahi-common-data
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 760
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: avahi
Version: 0.8-16
Description: Avahi common data files
 Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
 It allows programs to publish and discover services and hosts
 running on a local network with no specific configuration. For
 example you can plug into a network and instantly find printers to
 print to, files to look at and people to talk to.
 .
 This package contains common data files for avahi.
Homepage: https://avahi.org/

Package: libavahi-common3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 96
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: avahi
Version: 0.8-16
Depends: libc6 (>= 2.38), libavahi-common-data (= 0.8-16)
Description: Avahi common library
 Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
 It allows programs to publish and discover services and hosts
 running on a local network with no specific configuration. For
 example you can plug into a network and instantly find printers to
 print to, files to look at and people to talk to.
 .
 This package contains the Avahi common library, which is a set of common
 functions used by many of Avahis components and client applications.
Homepage: https://avahi.org/

Package: libavc1394-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 65
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libavc1394 (0.5.4-5)
Version: 0.5.4-5+b2
Depends: libc6 (>= 2.29), libraw1394-11 (>= 2.1.2)
Description: control IEEE 1394 audio/video devices
 libavc1394 is a programming interface for the 1394 Trade Association AV/C
 (Audio/Video Control) Digital Interface Command Set. It allows you to
 remote control camcorders and similar devices connected to your computer
 via an IEEE 1394 (aka Firewire) link.
 .
 This package includes the libraries needed to run executables using
 libavc1394.
Homepage: http://sourceforge.net/projects/libavc1394/

Package: libavcodec59
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 14701
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ffmpeg
Version: 7:5.1.9-0+deb12u1
Depends: libaom3 (>= 3.2.0), libavutil57 (= 7:5.1.9-0+deb12u1), libc6 (>= 2.35), libcairo2 (>= 1.2.4), libcodec2-1.0 (>= 1.0.5), libdav1d6 (>= 0.9.0), libglib2.0-0 (>= 2.12.0), libgsm1 (>= 1.0.18), libjxl0.7 (>= 0.7.0), liblzma5 (>= 5.1.1alpha+20120614), libmfx1 (>= 18.4.0), libmp3lame0 (>= 3.100), libopenjp2-7 (>= 2.0.0), libopus0 (>= 1.1), librav1e0 (>= 0.5.1), librsvg2-2 (>= 2.14.4), libshine3 (>= 3.1.0), libsnappy1v5 (>= 1.1.9), libspeex1 (>= 1.2~), libsvtav1enc1 (>= 1.4.1+dfsg), libswresample4 (>= 7:5.0), libtheora0 (>= 1.0), libtwolame0 (>= 0.3.10), libva2 (>= 2.9.0), libvorbis0a (>= 1.1.2), libvorbisenc2 (>= 1.1.2), libvpx7 (>= 1.12.0), libwebp7 (>= 1.2.4), libwebpmux3 (>= 1.2.4), libx264-164 (>= 2:0.164.3095+gitbaee400), libx265-199 (>= 3.5), libxvidcore4 (>= 1.2.2), libzvbi0 (>= 0.2.35), zlib1g (>= 1:1.2.0)
Suggests: libcuda1, libnvcuvid1, libnvidia-encode1
Description: FFmpeg library with de/encoders for audio/video codecs - runtime files
 FFmpeg is the leading multimedia framework, able to decode, encode, transcode,
 mux, demux, stream, filter and play pretty much anything that humans and
 machines have created. It supports the most obscure ancient formats up to the
 cutting edge.
 .
 This library provides a generic encoding/decoding framework and
 contains multiple decoders and encoders for audio, video and subtitle streams,
 and several bitstream filters.
 .
 The shared architecture provides various services ranging from bit stream I/O
 to DSP optimizations, and makes it suitable for implementing robust and fast
 codecs as well as for experimentation.
 .
 This package contains the runtime files.
Homepage: https://ffmpeg.org/

Package: libavcodec61
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 16613
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ffmpeg
Version: 7:7.1.5-0+deb13u1
Depends: libaom3 (>= 3.2.0), libavutil59 (= 7:7.1.5-0+deb13u1), libc6 (>= 2.35), libcairo2 (>= 1.2.4), libcodec2-1.2 (>= 1.2.0), libdav1d7 (>= 1.1.0), libglib2.0-0t64 (>= 2.12.0), libgsm1 (>= 1.0.18), libjxl0.11 (>= 0.8.0), liblzma5 (>= 5.1.1alpha+20120614), libmp3lame0 (>= 3.100), libopenjp2-7 (>= 2.0.0), libopus0 (>= 1.1), librav1e0.7 (>= 0.5.1), librsvg2-2 (>= 2.52.5), libshine3 (>= 3.1.0), libsnappy1v5 (>= 1.2.2), libspeex1 (>= 1.2~), libsvtav1enc2 (>= 2.2.1), libswresample5 (>= 7:7.1.5), libtheoradec1 (>= 1.0), libtheoraenc1 (>= 1.0), libtwolame0 (>= 0.3.10), libva2 (>= 2.9.0), libvorbis0a (>= 1.1.2), libvorbisenc2 (>= 1.1.2), libvpl2 (>= 1:2.14.0), libvpx9 (>= 1.12.0), libwebp7 (>= 1.5.0), libwebpmux3 (>= 1.5.0), libx264-164 (>= 2:0.164.3108+git31e19f9), libx265-215 (>= 4.1), libxvidcore4 (>= 1.2.2), libzvbi0t64 (>= 0.2.35), zlib1g (>= 1:1.2.0)
Suggests: libcuda1, libnvcuvid1, libnvidia-encode1
Description: FFmpeg library with de/encoders for audio/video codecs - runtime files
 FFmpeg is the leading multimedia framework, able to decode, encode, transcode,
 mux, demux, stream, filter and play pretty much anything that humans and
 machines have created. It supports the most obscure ancient formats up to the
 cutting edge.
 .
 This library provides a generic encoding/decoding framework and
 contains multiple decoders and encoders for audio, video and subtitle streams,
 and several bitstream filters.
 .
 The shared architecture provides various services ranging from bit stream I/O
 to DSP optimizations, and makes it suitable for implementing robust and fast
 codecs as well as for experimentation.
 .
 This package contains the runtime files.
Homepage: https://ffmpeg.org/

Package: libavdevice59
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 300
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ffmpeg
Version: 7:5.1.9-0+deb12u1
Depends: libasound2 (>= 1.0.16), libavc1394-0 (>= 0.5.3), libavcodec59 (>= 7:5.0), libavfilter8 (>= 7:5.1), libavformat59 (= 7:5.1.9-0+deb12u1), libavutil57 (= 7:5.1.9-0+deb12u1), libc6 (>= 2.34), libcaca0 (>= 0.99.beta20), libcdio-cdda2 (>= 10.2+2.0.0), libcdio-paranoia2 (>= 10.2+2.0.0), libdc1394-25 (>= 2.2.6), libdrm2 (>= 2.4.101), libgl1, libiec61883-0 (>= 1.2.0), libjack-jackd2-0 (>= 1.9.10+20150825) | libjack-0.125, libopenal1 (>= 1.14), libpulse0 (>= 0.99.1), libraw1394-11 (>= 2.1.2), libsdl2-2.0-0 (>= 2.0.12), libx11-6, libxcb-shape0, libxcb-shm0, libxcb-xfixes0, libxcb1, libxext6, libxv1
Description: FFmpeg library for handling input and output devices - runtime files
 FFmpeg is the leading multimedia framework, able to decode, encode, transcode,
 mux, demux, stream, filter and play pretty much anything that humans and
 machines have created. It supports the most obscure ancient formats up to the
 cutting edge.
 .
 This library provides a generic framework for grabbing from and rendering to
 many common multimedia input/output devices, and supports several input and
 output devices, including Video4Linux2, VfW, DShow, and ALSA.
 .
 This package contains the runtime files.
Homepage: https://ffmpeg.org/

Package: libavdevice61
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 301
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ffmpeg
Version: 7:7.1.5-0+deb13u1
Depends: libasound2t64 (>= 1.0.16), libavc1394-0 (>= 0.5.3), libavcodec61 (>= 7:7.1.5), libavfilter10 (>= 7:7.1.5), libavformat61 (= 7:7.1.5-0+deb13u1), libavutil59 (= 7:7.1.5-0+deb13u1), libc6 (>= 2.34), libcaca0 (>= 0.99.beta20), libcdio-cdda2t64 (>= 10.2+2.0.0), libcdio-paranoia2t64 (>= 10.2+2.0.0), libdc1394-25 (>= 2.2.6), libdrm2 (>= 2.4.101), libgl1, libiec61883-0 (>= 1.2.0), libjack-jackd2-0 (>= 1.9.10+20150825) | libjack-0.125, libopenal1 (>= 1.14), libpulse0 (>= 0.99.1), libraw1394-11 (>= 2.1.2), libsdl2-2.0-0 (>= 2.0.12), libx11-6, libxcb-shape0, libxcb-shm0, libxcb-xfixes0, libxcb1, libxext6, libxv1
Description: FFmpeg library for handling input and output devices - runtime files
 FFmpeg is the leading multimedia framework, able to decode, encode, transcode,
 mux, demux, stream, filter and play pretty much anything that humans and
 machines have created. It supports the most obscure ancient formats up to the
 cutting edge.
 .
 This library provides a generic framework for grabbing from and rendering to
 many common multimedia input/output devices, and supports several input and
 output devices, including Video4Linux2, VfW, DShow, and ALSA.
 .
 This package contains the runtime files.
Homepage: https://ffmpeg.org/

Package: libavfilter10
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 14159
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ffmpeg
Version: 7:7.1.5-0+deb13u1
Depends: libass9 (>= 1:0.15.0), libavcodec61 (= 7:7.1.5-0+deb13u1), libavformat61 (>= 7:7.1.5), libavutil59 (= 7:7.1.5-0+deb13u1), libbs2b0 (>= 3.1.0+dfsg), libc6 (>= 2.38), libflite1 (>= 1.4-release-9~), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.2.1), libfribidi0 (>= 0.19.2), libharfbuzz0b (>= 0.9.9), liblilv-0-0 (>= 0.14.2~dfsg0), libmysofa1 (>= 0.7~), libplacebo349 (>= 7.349.0), libpocketsphinx3 (>= 0.8+5prealpha+1), libpostproc58 (>= 7:7.1.5), librubberband2 (>= 3.3.0+dfsg), libsphinxbase3t64 (>= 0.8+5prealpha), libstdc++6 (>= 13.1), libswresample5 (>= 7:7.1.5), libswscale8 (>= 7:7.1.5), libva2 (>= 1.7.3), libvidstab1.1, libvpl2 (>= 1:2.14.0), libzimg2 (>= 0.3.1), libzmq5 (>= 3.2.3+dfsg), ocl-icd-libopencl1 | libopencl1, ocl-icd-libopencl1 (>= 1.0) | libopencl-1.2-1, zlib1g (>= 1:1.1.4)
Description: FFmpeg library containing media filters - runtime files
 FFmpeg is the leading multimedia framework, able to decode, encode, transcode,
 mux, demux, stream, filter and play pretty much anything that humans and
 machines have created. It supports the most obscure ancient formats up to the
 cutting edge.
 .
 This library provides a generic audio/video filtering framework containing
 several filters, sources and sinks.
 .
 This package contains the runtime files.
Homepage: https://ffmpeg.org/

Package: libavfilter8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 12411
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ffmpeg
Version: 7:5.1.9-0+deb12u1
Depends: libass9 (>= 1:0.13.6), libavcodec59 (= 7:5.1.9-0+deb12u1), libavformat59 (>= 7:5.0), libavutil57 (= 7:5.1.9-0+deb12u1), libbs2b0 (>= 3.1.0+dfsg), libc6 (>= 2.35), libflite1 (>= 1.4-release-9~), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.2.1), libfribidi0 (>= 0.19.2), liblilv-0-0 (>= 0.14.2~dfsg0), libmfx1 (>= 18.4.0), libmysofa1 (>= 0.7~), libplacebo208 (>= 4.208.0), libpocketsphinx3 (>= 0.8+5prealpha+1), libpostproc56 (>= 7:5.0), librubberband2 (>= 3.1.2+dfsg0), libsphinxbase3 (>= 0.8+5prealpha), libstdc++6 (>= 11), libswresample4 (>= 7:5.1), libswscale6 (>= 7:5.0), libva2 (>= 1.7.3), libvidstab1.1, libzimg2 (>= 0.3.1), libzmq5 (>= 3.2.3+dfsg), ocl-icd-libopencl1 | libopencl1, ocl-icd-libopencl1 (>= 1.0) | libopencl-1.2-1, zlib1g (>= 1:1.1.4)
Description: FFmpeg library containing media filters - runtime files
 FFmpeg is the leading multimedia framework, able to decode, encode, transcode,
 mux, demux, stream, filter and play pretty much anything that humans and
 machines have created. It supports the most obscure ancient formats up to the
 cutting edge.
 .
 This library provides a generic audio/video filtering framework containing
 several filters, sources and sinks.
 .
 This package contains the runtime files.
Homepage: https://ffmpeg.org/

Package: libavformat59
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2819
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ffmpeg
Version: 7:5.1.9-0+deb12u1
Depends: libavcodec59 (= 7:5.1.9-0+deb12u1), libavutil57 (= 7:5.1.9-0+deb12u1), libbluray2 (>= 1:0.2.2), libbz2-1.0, libc6 (>= 2.35), libchromaprint1 (>= 1.3.2), libgme0 (>= 0.5.5), libgnutls30 (>= 3.7.5), libopenmpt0 (>= 0.3.0), librabbitmq4 (>= 0.6.0), librist4 (>= 0.2.6+dfsg), libsrt1.5-gnutls (>= 1.5.1), libssh-gcrypt-4 (>= 0.8.0), libxml2 (>= 2.7.4), libzmq5 (>= 4.0.1+dfsg), zlib1g (>= 1:1.2.0.2)
Description: FFmpeg library with (de)muxers for multimedia containers - runtime files
 FFmpeg is the leading multimedia framework, able to decode, encode, transcode,
 mux, demux, stream, filter and play pretty much anything that humans and
 machines have created. It supports the most obscure ancient formats up to the
 cutting edge.
 .
 This library provides a generic framework for multiplexing and demultiplexing
 (muxing and demuxing) audio, video and subtitle streams. It encompasses
 multiple muxers and demuxers for multimedia container formats. It also
 supports several input and output protocols to access a media resource.
 .
 This package contains the runtime files.
Homepage: https://ffmpeg.org/

Package: libavformat61
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3047
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ffmpeg
Version: 7:7.1.5-0+deb13u1
Depends: libavcodec61 (= 7:7.1.5-0+deb13u1), libavutil59 (= 7:7.1.5-0+deb13u1), libbluray2 (>= 1:0.2.2), libbz2-1.0, libc6 (>= 2.35), libchromaprint1 (>= 1.3.2), libdvdnav4 (>= 6.1.0), libdvdread8t64 (>= 6.1.0), libgme0 (>= 0.5.5), libgnutls30t64 (>= 3.8.1), libopenmpt0t64 (>= 0.3.0), librabbitmq4 (>= 0.6.0), librist4 (>= 0.2.6+dfsg), libsrt1.5-gnutls (>= 1.5.4), libssh-4 (>= 0.8.0), libxml2 (>= 2.7.4), libzmq5 (>= 4.0.1+dfsg), zlib1g (>= 1:1.2.0.2)
Description: FFmpeg library with (de)muxers for multimedia containers - runtime files
 FFmpeg is the leading multimedia framework, able to decode, encode, transcode,
 mux, demux, stream, filter and play pretty much anything that humans and
 machines have created. It supports the most obscure ancient formats up to the
 cutting edge.
 .
 This library provides a generic framework for multiplexing and demultiplexing
 (muxing and demuxing) audio, video and subtitle streams. It encompasses
 multiple muxers and demuxers for multimedia container formats. It also
 supports several input and output protocols to access a media resource.
 .
 This package contains the runtime files.
Homepage: https://ffmpeg.org/

Package: libavif15
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 203
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libavif
Version: 0.11.1-1+deb12u1
Depends: libaom3 (>= 3.2.0), libc6 (>= 2.14), libdav1d6 (>= 0.1.0), libgav1-1 (>= 0.18.0), librav1e0 (>= 0.5.1), libsvtav1enc1 (>= 1.4.1+dfsg), libyuv0 (>= 0.0~git20221206)
Description: Library for handling .avif files
 This library aims to be a friendly, portable C implementation of the AV1
 Image File Format as described in https://aomediacodec.github.io/av1-avif/.
 .
 This package provides the shared library files.
Homepage: https://github.com/AOMediaCodec/libavif

Package: libavif16
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 288
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libavif
Version: 1.2.1-1.2
Depends: libaom3 (>= 3.2.0), libc6 (>= 2.34), libdav1d7 (>= 0.1.0), libgav1-1 (>= 0.18.0), librav1e0.7 (>= 0.5.1), libsvtav1enc2 (>= 2.2.1), libyuv0 (>= 0.0.1904)
Description: Library for handling .avif files
 This library aims to be a friendly, portable C implementation of the AV1
 Image File Format as described in https://aomediacodec.github.io/av1-avif/.
 .
 This package provides the shared library files.
Homepage: https://github.com/AOMediaCodec/libavif

Package: libavutil57
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1031
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ffmpeg
Version: 7:5.1.9-0+deb12u1
Depends: libc6 (>= 2.35), libdrm2 (>= 2.4.66), libmfx1 (>= 18.4.0), libva-drm2 (>= 1.3), libva-x11-2 (>= 1.3), libva2 (>= 2.1.0), libvdpau1 (>= 0.2), libx11-6, ocl-icd-libopencl1 | libopencl1, ocl-icd-libopencl1 (>= 1.0) | libopencl-1.2-1
Description: FFmpeg library with functions for simplifying programming - runtime files
 FFmpeg is the leading multimedia framework, able to decode, encode, transcode,
 mux, demux, stream, filter and play pretty much anything that humans and
 machines have created. It supports the most obscure ancient formats up to the
 cutting edge.
 .
 This library is a utility library to aid portable multimedia programming.
 It contains safe portable string functions, random number generators, data
 structures, additional mathematics functions, cryptography and multimedia
 related functionality (like enumerations for pixel and sample formats).
 It is not a library for code needed by both libavcodec and libavformat.
 The goal for this library is to be modular, small, efficient and useful.
 .
 This package contains the runtime files.
Homepage: https://ffmpeg.org/

Package: libavutil59
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1252
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ffmpeg
Version: 7:7.1.5-0+deb13u1
Depends: libc6 (>= 2.35), libdrm2 (>= 2.4.66), libva-drm2 (>= 1.3), libva-x11-2 (>= 1.3), libva2 (>= 2.21.0), libvdpau1 (>= 0.2), libvpl2 (>= 1:2.14.0), libx11-6, ocl-icd-libopencl1 | libopencl1, ocl-icd-libopencl1 (>= 1.0) | libopencl-1.2-1
Description: FFmpeg library with functions for simplifying programming - runtime files
 FFmpeg is the leading multimedia framework, able to decode, encode, transcode,
 mux, demux, stream, filter and play pretty much anything that humans and
 machines have created. It supports the most obscure ancient formats up to the
 cutting edge.
 .
 This library is a utility library to aid portable multimedia programming.
 It contains safe portable string functions, random number generators, data
 structures, additional mathematics functions, cryptography and multimedia
 related functionality (like enumerations for pixel and sample formats).
 It is not a library for code needed by both libavcodec and libavformat.
 The goal for this library is to be modular, small, efficient and useful.
 .
 This package contains the runtime files.
Homepage: https://ffmpeg.org/

Package: libbdplus0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 144
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libbdplus (0.2.0-4)
Version: 0.2.0-4+b1
Depends: libc6 (>= 2.33), libgcrypt20 (>= 1.11.0), libgpg-error0 (>= 1.14)
Recommends: libaacs0
Enhances: libbluray2
Description: implementation of BD+ for reading Blu-ray Discs
 libbdplus is a research project to implement the BD+ System Specifications.
 It provides, through an open-source library, a way to understand how the BD+
 works.
 .
 This package DOES NOT provide any key, certificate, configuration
 file or virtual machine that could be used to decode encrypted
 copyrighted material.
 .
 This package provides the shared library.
Homepage: https://www.videolan.org/developers/libbdplus.html

Package: libbinutils
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 2390
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: binutils
Version: 2.44-3
Replaces: binutils (<< 2.29-6)
Depends: libc6 (>= 2.38), libsframe1, libzstd1 (>= 1.5.5), zlib1g (>= 1:1.2.0), binutils-common (= 2.44-3)
Breaks: binutils (<< 2.29-6)
Description: GNU binary utilities (private shared library)
 This package includes the private shared libraries libbfd and libopcodes.
Homepage: https://www.gnu.org/software/binutils/

Package: libblas3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 521
Maintainer: Debian Science Team <debian-science-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: lapack
Version: 3.12.1-6
Provides: libblas.so.3
Depends: libc6 (>= 2.4), libgcc-s1 (>= 3.0)
Description: Basic Linear Algebra Reference implementations, shared library
 BLAS (Basic Linear Algebra Subroutines) is a set of efficient
 routines for most of the basic vector and matrix operations.
 They are widely used as the basis for other high quality linear
 algebra software, for example lapack and linpack.  This
 implementation is the Fortran 77 reference implementation found
 at netlib.
 .
 This package contains a shared version of the library.
Homepage: https://www.netlib.org/lapack/

Package: libblkid1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 453
Maintainer: Chris Hofstaedtler <zeha@debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.41.5-0+deb13u1
Depends: libc6 (>= 2.38)
Description: block device ID library
 The blkid library allows system programs such as fsck and mount to
 quickly and easily find block devices by filesystem UUID or label.
 This allows system administrators to avoid specifying filesystems by
 hard-coded device names and use a logical naming system instead.
Homepage: https://github.com/util-linux/util-linux

Package: libbluray2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 353
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libbluray (1:1.3.4-1)
Version: 1:1.3.4-1+b2
Depends: libc6 (>= 2.34), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.2.1), libudfread0 (>= 1.1.1), libxml2 (>= 2.7.4)
Recommends: libaacs0
Suggests: libbluray-bdj
Description: Blu-ray disc playback support library (shared library)
 libbluray is an open-source library designed for Blu-Ray Discs playback for
 media players, like VLC or MPlayer. This research project is developed by an
 international team of developers from Doom9. libbluray integrates navigation,
 playlist parsing, menus, and BD-J.
 .
 NB: Most commercial Blu-Ray are restricted by AACS or BD+ technologies and this
 library is not enough to playback those discs.
 .
 This package provides the shared library.
Homepage: https://www.videolan.org/developers/libbluray.html

Package: libbpf1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 452
Maintainer: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Architecture: amd64
Multi-Arch: same
Source: libbpf (1.5.0-3)
Version: 1:1.5.0-3
Depends: libc6 (>= 2.38), libelf1t64 (>= 0.144), zlib1g (>= 1:1.2.3.3)
Description: eBPF helper library (shared library)
 libbpf is a library for loading eBPF programs and reading and
 manipulating eBPF objects from user-space.
 .
 This package contains the shared library.

Package: libbrotli-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1001
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: amd64
Multi-Arch: same
Source: brotli (1.1.0-2)
Version: 1.1.0-2+b7
Depends: libbrotli1 (= 1.1.0-2+b7)
Description: library implementing brotli encoder and decoder (development files)
 Brotli is a generic-purpose lossless compression algorithm
 that compresses data using a combination of a modern variant
 of the LZ77 algorithm, Huffman coding and 2nd order context modeling,
 with a compression ratio comparable to the best currently available
 general-purpose compression methods. It is similar in speed with
 deflate but offers more dense compression.
 .
 This package installs development files.
Homepage: https://github.com/google/brotli

Package: libbrotli1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 870
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: amd64
Multi-Arch: same
Source: brotli (1.1.0-2)
Version: 1.1.0-2+b7
Depends: libc6 (>= 2.29)
Description: library implementing brotli encoder and decoder (shared libraries)
 Brotli is a generic-purpose lossless compression algorithm
 that compresses data using a combination of a modern variant
 of the LZ77 algorithm, Huffman coding and 2nd order context modeling,
 with a compression ratio comparable to the best currently available
 general-purpose compression methods. It is similar in speed with
 deflate but offers more dense compression.
 .
 This package installs shared libraries.
Homepage: https://github.com/google/brotli

Package: libbs2b0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 46
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libbs2b (3.1.0+dfsg-8)
Version: 3.1.0+dfsg-8+b1
Depends: libc6 (>= 2.29), libstdc++6 (>= 4.1.1)
Description: Bauer stereophonic-to-binaural DSP library
 The Bauer stereophonic-to-binaural DSP (bs2b) is designed to improve
 headphone listening of stereo audio records.
 .
 Typical stereo recordings are made for listening with speakers.
 What's missing in headphones is the sound going from each channel
 to the opposite ear, arriving a short time later for the extra distance
 traveled, and with a bit of high frequency roll-off for the shadowing
 effect of the head. The time delay to the far ear should also be
 somewhat longer at low frequencies than at high frequencies. bs2b
 implements both of these ideas to transform stereophonic recordings
 for headphone listening.
Homepage: https://bs2b.sourceforge.net/

Package: libbsd0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 214
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libbsd
Version: 0.12.2-2
Depends: libc6 (>= 2.38), libmd0 (>= 1.0.3-2)
Description: utility functions from BSD systems - shared library
 This library provides some C functions such as strlcpy() that are commonly
 available on BSD systems but not on others like GNU systems.
 .
 For a detailed list of the provided functions, please see the libbsd-dev
 package description.
Homepage: https://libbsd.freedesktop.org/

Package: libbz2-1.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 96
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: same
Source: bzip2
Version: 1.0.8-6
Depends: libc6 (>= 2.4)
Description: high-quality block-sorting file compressor library - runtime
 This package contains libbzip2 which is used by the bzip2 compressor.
 .
 bzip2 is a freely available, patent free, data compressor.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding.  Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
Homepage: https://sourceware.org/bzip2/

Package: libbz2-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 99
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: same
Source: bzip2
Version: 1.0.8-6
Replaces: bzip2 (<< 0.9.5d-3)
Depends: libbz2-1.0 (= 1.0.8-6), libc6-dev | libc-dev
Recommends: bzip2-doc
Description: high-quality block-sorting file compressor library - development
 Static libraries and include files for the bzip2 compressor library.
 .
 bzip2 is a freely available, patent free, data compressor.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding.  Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
Homepage: https://sourceware.org/bzip2/

Package: libc-bin
Essential: yes
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 2122
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: glibc
Version: 2.41-12+deb13u4
Depends: libc6 (>> 2.41), libc6 (<< 2.42)
Recommends: manpages
Breaks: dh-lua (<< 27+nmu1~)
Conffiles:
 /etc/bindresvport.blacklist 4c09213317e4e3dd3c71d74404e503c5
 /etc/default/nss d6d5d6f621fb3ead2548076ce81e309c
 /etc/gai.conf 28fa76ff5a9e0566eaa1e11f1ce51f09
 /etc/ld.so.conf 4317c6de8564b68d628c21efa96b37e4
 /etc/ld.so.conf.d/libc.conf d4d833fd095fb7b90e1bb4a547f16de6
Description: GNU C Library: Binaries
 This package contains utility programs related to the GNU C Library.
 .
  * getconf: query system configuration variables
  * getent: get entries from administrative databases
  * iconv, iconvconfig: convert between character encodings
  * ldd, ldconfig: print/configure shared library dependencies
  * locale, localedef: show/generate locale definitions
  * tzselect, zdump, zic: select/dump/compile time zones
Homepage: https://www.gnu.org/software/libc/libc.html

Package: libc-dev-bin
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 126
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: glibc
Version: 2.41-12+deb13u4
Depends: libc6 (>> 2.41), libc6 (<< 2.42)
Recommends: manpages, manpages-dev
Suggests: libc-devtools (>> 2.41)
Description: GNU C Library: Development binaries
 This package contains utility programs related to the GNU C Library
 development package.
 .
  * gencat: generate message catalogs
Homepage: https://www.gnu.org/software/libc/libc.html

Package: libc-devtools
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 175
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: glibc
Version: 2.41-12+deb13u4
Replaces: libc-dev-bin (<< 2.31-8)
Depends: libc6 (>= 2.38), libgd3 (>= 2.1.0~alpha~)
Recommends: libc-dev (= 2.41-12+deb13u4), manpages, manpages-dev
Breaks: libc-dev-bin (<< 2.31-8)
Description: GNU C Library: Development tools
 This package contains development tools shipped by the GNU C
 Library.
 .
  * memusage, memusagestat: profile a program's memory usage
  * mtrace: interpret the malloc trace log
  * sotruss: trace shared library calls
  * sprof: display shared object profiling data
Homepage: https://www.gnu.org/software/libc/libc.html

Package: libc-l10n
Status: install ok installed
Priority: standard
Section: localization
Installed-Size: 4739
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: glibc
Version: 2.41-12+deb13u4
Description: GNU C Library: localization files
 This package contains the translation files for the GNU C library and
 utility programs.
Homepage: https://www.gnu.org/software/libc/libc.html

Package: libc6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 13226
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: glibc
Version: 2.41-12+deb13u4
Replaces: libc6-amd64
Depends: libgcc-s1
Recommends: libidn2-0 (>= 2.0.5~)
Suggests: glibc-doc, debconf | debconf-2.0, libc-l10n, locales, libnss-nis, libnss-nisplus
Breaks: base-files (<< 13.3~), chrony (<< 4.2-3~), dhcpcd (<< 1:10.1.0-7~), fakechroot (<< 2.19-3.5), firefox (<< 91~), firefox-esr (<< 91~), gnumach-image-1.8-486 (<< 2:1.8+git20210923~), gnumach-image-1.8-486-dbg (<< 2:1.8+git20210923~), gnumach-image-1.8-xen-486 (<< 2:1.8+git20210923~), gnumach-image-1.8-xen-486-dbg (<< 2:1.8+git20210923~), hurd (<< 1:0.9.git20220301-2), libamdhip64-5 (<< 5.7.1-5+b1), libhiprtc-builtins5 (<< 5.7.1-5+b1), librccl1 (<< 5.4.3-3+b1), libswupdate0.1 (<< 2024.12.1+dfsg-1+b3), locales (<< 2.41), locales-all (<< 2.41), lua-swupdate (<< 2024.12.1+dfsg-1+b3), nscd (<< 2.41), pd-scaf (<< 1:0.14.1+darcs20180201-6+b4), postgresql-15-pllua (<< 1:2.0.12-4), postgresql-17-pllua (<< 1:2.0.12-3+b2), python3-iptables (<< 1.0.0-2), python3-mrgingham (<< 1.25-1), python3-onnxruntime (<< 1.20.1+dfsg-2~), sysvinit (<< 3.09-2~), sysvinit-core (<< 3.09-2~), tinydns (<< 1:1.05-14), uwsgi-plugin-pypy3 (<< 0.0.2+b1), valgrind (<< 1:3.19.0-1~)
Conffiles:
 /etc/ld.so.conf.d/x86_64-linux-gnu.conf d4e7a7b88a71b5ffd9e2644e71a0cfab
Description: GNU C Library: Shared libraries
 Contains the standard libraries that are used by nearly all programs on
 the system. This package includes shared versions of the standard C library
 and the standard math library, as well as many others.
Homepage: https://www.gnu.org/software/libc/libc.html

Package: libc6-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 12542
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: glibc
Version: 2.41-12+deb13u4
Replaces: libc6 (<= 2.32-1)
Provides: libc-dev (= 2.41-12+deb13u4)
Depends: libc6 (= 2.41-12+deb13u4), libc-dev-bin (= 2.41-12+deb13u4), linux-libc-dev, libcrypt-dev, rpcsvc-proto
Suggests: glibc-doc, manpages-dev
Breaks: binutils (<< 2.38), catch (<< 1.12.2-0.1), heimdal-multidev (<= 7.7.0+dfsg-4), igblast (<= 1.19.0-1), libassimp-dev (<= 5.2.4~ds0-1), libasyncns-dev (<= 0.8-6+b2), libatm1-dev (<= 1:2.5.1-4), libaws20-dev (<= 20.2-2+b1), libboinc-app-dev (<= 7.20.2+dfsg-1), libbson-dev (<= 1.22.0-1), libc6-dev-amd64-cross (<< 2.41~), libcups2-dev (<= 2.4.2-1), libdeal.ii-dev (<= 9.4.0-1), libdkim-dev (<= 1:1.0.21-4+b2), libdolfin-dev-common (<= 2019.2.0~git20220407.d29e24d-5), libdpkg-perl (<< 1.22.22), libeckit-dev (<= 1.20.0-1), libfclib-dev (<= 3.1.0+dfsg-2), libfltk1.3-dev (<= 1.3.8-4+b1), libghc-resolv-dev (<= 0.1.2.0-3), libghc-resolv-prof (<= 0.1.2.0-3), libglib2.0-dev (<= 2.72.3-1), libgloox-dev (<= 1.0.24-2+b1), libhesiod-dev (<= 3.2.1-3.1+b1), libinfinity-0.7-dev (<= 0.7.2-1+b1), libinsighttoolkit4-dev (<= 4.13.3withdata-dfsg2-3+b1), libinsighttoolkit5-dev (<= 5.2.1-5+b1), libismrmrd-dev (<= 1.8.0-2), libldap-dev (<= 2.5.12+dfsg-2), liblog4cplus-dev (<= 2.0.7-1), libloudmouth1-dev (<= 1.5.4-1), libmgl-dev (<= 8.0.1-2), libmimalloc2.0 (<= 2.0.6+ds-1), libminc-dev (<= 2.4.03-5), libmongoc-dev (<= 1.22.1-1), libmrpt-ros1bridge-dev (<= 1:2.4.9+ds-4+b2), libmysqlclient-dev (<= 8.0.29-1), libnetcdf-dev (<= 1:4.9.0-3), libnetcdf-mpi-dev (<= 1:4.9.0-1), libnetcdf-pnetcdf-dev (<= 1:4.9.0-1), libnfsidmap-dev (<= 1:2.6.1-2), libns3-dev (<= 3.36.1+dfsg-4), libola-dev (<= 0.10.8.nojsmin-2), libopenafs-dev (<= 1.8.8.1-3), libopendkim-dev (<= 2.11.0~beta2-7), libopendmarc-dev (<= 1.4.2-1), libopenms-dev (<= 2.6.0+cleaned1-3+b1), libopenzwave1.6-dev (<= 1.6.1914+ds-1), libpg-query-dev (<= 13-2.1.2-2), librbl-dev (<= 2.11.0~beta2-7), libre-dev (<= 1.1.0-1+b1), libshishi-dev (<= 1.0.2-11), libslurm-dev (<= 21.08.8.2-1), libsocksd0-dev (<= 1.4.2+dfsg-7+b4), libspf2-dev (<= 1.2.10-7.1+b1), libstrophe-dev (<= 0.12.1-2), libtaningia-dev (<= 0.2.2-2+b1), libtrilinos-amesos-dev (<= 13.2.0-3), libtrilinos-amesos2-dev (<= 13.2.0-3), libtrilinos-anasazi-dev (<= 13.2.0-3), libtrilinos-aztecoo-dev (<= 13.2.0-3), libtrilinos-belos-dev (<= 13.2.0-3), libtrilinos-epetra-dev (<= 13.2.0-3), libtrilinos-epetraext-dev (<= 13.2.0-3), libtrilinos-galeri-dev (<= 13.2.0-3), libtrilinos-ifpack-dev (<= 13.2.0-3), libtrilinos-ifpack2-dev (<= 13.2.0-3), libtrilinos-intrepid-dev (<= 13.2.0-3), libtrilinos-intrepid2-dev (<= 13.2.0-3), libtrilinos-isorropia-dev (<= 13.2.0-3), libtrilinos-kokkos-dev (<= 13.2.0-3), libtrilinos-kokkos-kernels-dev (<= 13.2.0-3), libtrilinos-komplex-dev (<= 13.2.0-3), libtrilinos-ml-dev (<= 13.2.0-3), libtrilinos-moertel-dev (<= 13.2.0-3), libtrilinos-muelu-dev (<= 13.2.0-3), libtrilinos-nox-dev (<= 13.2.0-3), libtrilinos-phalanx-dev (<= 13.2.0-3), libtrilinos-pike-dev (<= 13.2.0-3), libtrilinos-piro-dev (<= 13.2.0-3), libtrilinos-pliris-dev (<= 13.2.0-3), libtrilinos-rol-dev (<= 13.2.0-3), libtrilinos-rtop-dev (<= 13.2.0-3), libtrilinos-rythmos-dev (<= 13.2.0-3), libtrilinos-sacado-dev (<= 13.2.0-3), libtrilinos-shylu-dev (<= 13.2.0-3), libtrilinos-stokhos-dev (<= 13.2.0-3), libtrilinos-stratimikos-dev (<= 13.2.0-3), libtrilinos-teko-dev (<= 13.2.0-3), libtrilinos-teuchos-dev (<= 13.2.0-3), libtrilinos-thyra-dev (<= 13.2.0-3), libtrilinos-tpetra-dev (<= 13.2.0-3), libtrilinos-trilinoscouplings-dev (<= 13.2.0-3), libtrilinos-triutils-dev (<= 13.2.0-3), libtrilinos-xpetra-dev (<= 13.2.0-3), libtrilinos-zoltan2-dev (<= 13.2.0-3), libvbr-dev (<= 2.11.0~beta2-7), libvisp-dev (<= 3.5.0-2+b1), libvotca-dev (<= 2022-3), libvtk6-dev (<= 6.3.0+dfsg2-8.1+b1), libvtk7-dev (<= 7.1.1+dfsg2-10.2), open-vm-tools-dev (<= 2:12.0.5-2), pidgin-librvp (<= 0.9.7cvs-3), proftpd-dev (<= 1.3.7d+dfsg-2), slurm-wlm-basic-plugins-dev (<= 21.08.8.2-1)
Conflicts: libc0.3-dev, libc6.1-dev
Description: GNU C Library: Development Libraries and Header Files
 Contains the symlinks, headers, and object files needed to compile
 and link programs which use the standard C library.
Homepage: https://www.gnu.org/software/libc/libc.html

Package: libcaca0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 899
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libcaca
Version: 0.99.beta20-5+deb13u1
Depends: libc6 (>= 2.34), libncursesw6 (>= 6), libslang2 (>= 2.2.4), libstdc++6 (>= 13.1), libtinfo6 (>= 6), zlib1g (>= 1:1.1.4)
Description: colour ASCII art library
 libcaca is the Colour AsCii Art library. It provides high level functions
 for colour text drawing, simple primitives for line, polygon and ellipse
 drawing, as well as powerful image to text conversion routines.
 .
 This package contains the shared library for libcaca.
Homepage: http://caca.zoy.org/wiki/libcaca

Package: libcairo-gobject2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 197
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: cairo (1.18.4-1)
Version: 1.18.4-1+b1
Depends: libcairo2 (= 1.18.4-1+b1), libglib2.0-0t64 (>= 2.68.0)
Description: Cairo 2D vector graphics library (GObject library)
 Cairo is a multi-platform library providing anti-aliased
 vector-based rendering for multiple target backends.
 .
 This package contains the GObject library, providing wrapper GObject types
 for all cairo types.
Homepage: https://cairographics.org/

Package: libcairo2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1391
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: cairo (1.18.4-1)
Version: 1.18.4-1+b1
Depends: libc6 (>= 2.38), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.11.1), libpixman-1-0 (>= 0.40.0), libpng16-16t64 (>= 1.6.46), libx11-6, libxcb-render0, libxcb-shm0, libxcb1 (>= 1.6), libxext6, libxrender1, zlib1g (>= 1:1.1.4)
Description: Cairo 2D vector graphics library
 Cairo is a multi-platform library providing anti-aliased
 vector-based rendering for multiple target backends. Paths consist
 of line segments and cubic splines and can be rendered at any width
 with various join and cap styles. All colors may be specified with
 optional translucence (opacity/alpha) and combined using the
 extended Porter/Duff compositing algebra as found in the X Render
 Extension.
 .
 Cairo exports a stateful rendering API similar in spirit to the path
 construction, text, and painting operators of PostScript, (with the
 significant addition of translucence in the imaging model). When
 complete, the API is intended to support the complete imaging model of
 PDF 1.4.
 .
 This package contains the shared libraries.
Homepage: https://cairographics.org/

Package: libcap-ng0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 66
Maintainer: Håvard F. Aasen <havard.f.aasen@pfft.no>
Architecture: amd64
Multi-Arch: same
Source: libcap-ng (0.8.5-4)
Version: 0.8.5-4+b1
Depends: libc6 (>= 2.38)
Description: alternate POSIX capabilities library
 This library implements the user-space interfaces to the POSIX
 1003.1e capabilities available in Linux kernels.  These capabilities are
 a partitioning of the all powerful root privilege into a set of distinct
 privileges.
 .
 The libcap-ng library is intended to make programming with POSIX
 capabilities much easier than the traditional libcap library.
 .
 This package contains dynamic libraries for libcap-ng.
Homepage: https://people.redhat.com/sgrubb/libcap-ng

Package: libcap2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 92
Maintainer: Christian Kastner <ckk@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libcap2 (1:2.75-10+deb13u1)
Version: 1:2.75-10+deb13u1+b3
Depends: libc6 (>= 2.38)
Description: POSIX 1003.1e capabilities (library)
 Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities
 available in Linux kernels. These capabilities are a partitioning of the all
 powerful root privilege into a set of distinct privileges.
 .
 This package contains the shared library.
Homepage: https://sites.google.com/site/fullycapable/

Package: libcap2-bin
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 132
Maintainer: Christian Kastner <ckk@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: libcap2 (1:2.75-10+deb13u1)
Version: 1:2.75-10+deb13u1+b3
Replaces: libcap-bin
Depends: libc6 (>= 2.38), libcap2 (>= 1:2.63)
Recommends: libpam-cap
Breaks: libcap-bin
Description: POSIX 1003.1e capabilities (utilities)
 Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities
 available in Linux kernels. These capabilities are a partitioning of the all
 powerful root privilege into a set of distinct privileges.
 .
 This package contains additional utilities.
Homepage: https://sites.google.com/site/fullycapable/

Package: libcbor0.10
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 94
Maintainer: Vincent Bernat <bernat@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libcbor
Version: 0.10.2-2
Depends: libc6 (>= 2.14)
Description: library for parsing and generating CBOR (RFC 7049)
 CBOR is a general-purpose schema-less binary data format, defined in
 RFC 7049. This package provides a C library for parsing and generating
 CBOR. The main features are:
 .
  - Complete RFC conformance
  - Robust C99 implementation
  - Layered architecture offers both control and convenience
  - Flexible memory management
  - No shared global state - threading friendly
  - Proper handling of UTF-8
  - Full support for streams & incremental processing
  - Extensive documentation and test suite
  - No runtime dependencies, small footprint
 .
 This package contains the runtime library.
Homepage: https://github.com/PJK/libcbor

Package: libcbor0.8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 98
Maintainer: Vincent Bernat <bernat@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libcbor (0.8.0-2)
Version: 0.8.0-2+b1
Depends: libc6 (>= 2.14)
Description: library for parsing and generating CBOR (RFC 7049)
 CBOR is a general-purpose schema-less binary data format, defined in
 RFC 7049. This package provides a C library for parsing and generating
 CBOR. The main features are:
 .
  - Complete RFC conformance
  - Robust C99 implementation
  - Layered architecture offers both control and convenience
  - Flexible memory management
  - No shared global state - threading friendly
  - Proper handling of UTF-8
  - Full support for streams & incremental processing
  - Extensive documentation and test suite
  - No runtime dependencies, small footprint
 .
 This package contains the runtime library.
Homepage: https://github.com/PJK/libcbor

Package: libcc1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 140
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-14
Version: 14.2.0-19
Depends: gcc-14-base (= 14.2.0-19), libc6 (>= 2.14), libgcc-s1 (>= 3.0), libstdc++6 (>= 5.2)
Description: GCC cc1 plugin for GDB
 libcc1 is a plugin for GDB.
Homepage: http://gcc.gnu.org/

Package: libcdio-cdda2t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 55
Maintainer: Philippe SWARTVAGHER <phil.swart@gmx.fr>
Architecture: amd64
Multi-Arch: same
Source: libcdio-paranoia (10.2+2.0.2-1)
Version: 10.2+2.0.2-1+b1
Replaces: libcdio-cdda2
Provides: libcdio-cdda2 (= 10.2+2.0.2-1+b1)
Depends: libc6 (>= 2.33), libcdio19t64 (>= 2.1.0)
Breaks: libcdio-cdda2 (<< 10.2+2.0.2-1)
Description: library to read and control digital audio CDs
 This library is made to read and control digital audio CDs. It does
 not play such CDs, it only reads them digitally. As it uses libcdio as
 a backend, it supports the same kind of CDROM drives (and images) as
 libcdio.
Homepage: https://www.gnu.org/software/libcdio/

Package: libcdio-paranoia2t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 55
Maintainer: Philippe SWARTVAGHER <phil.swart@gmx.fr>
Architecture: amd64
Multi-Arch: same
Source: libcdio-paranoia (10.2+2.0.2-1)
Version: 10.2+2.0.2-1+b1
Replaces: libcdio-paranoia2
Provides: libcdio-paranoia2 (= 10.2+2.0.2-1+b1)
Depends: libc6 (>= 2.14), libcdio-cdda2t64 (>= 10.2+2.0.0), libcdio19t64 (>= 2.1.0)
Breaks: libcdio-paranoia2 (<< 10.2+2.0.2-1)
Description: library to read digital audio CDs with error correction
 This library is made to read digital audio CDs, with error
 correction. It does its best to correct errors and jitter that happen
 when reading such discs. As it uses libcdio as a backend, it supports
 the same kind of CDROM drives (and images) as libcdio.
Homepage: https://www.gnu.org/software/libcdio/

Package: libcdio19t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 191
Maintainer: Gabriel F. T. Gomes <gabriel@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libcdio
Version: 2.2.0-4.1~deb13u1
Replaces: libcdio19
Provides: libcdio19 (= 2.2.0-4.1~deb13u1)
Depends: libc6 (>= 2.33)
Breaks: libcdio19 (<< 2.2.0-4.1~deb13u1), libiso9660++-0 (<< 2.2.0), libiso9660++-0t64 (<< 2.2.0), libiso9660-11 (<< 2.2.0), libiso9660-11t64 (<< 2.2.0)
Description: library to read and control CD-ROM
 This library is to encapsulate CD-ROM reading and
 control. Applications wishing to be oblivious of the OS- and
 device-dependant properties of a CD-ROM can use this library.
 .
 Some support for disk image types like BIN/CUE and NRG is available,
 so applications that use this library also have the ability to read
 disc images as though they were CD's.
Homepage: https://www.gnu.org/software/libcdio/

Package: libcgi-fast-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 29
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 1:2.17-1
Depends: perl:any, libcgi-pm-perl, libfcgi-perl
Description: CGI subclass for work with FCGI
 CGI::Fast is a subclass of the CGI object created by CGI.pm. It is
 specialized to work with the FCGI module, which greatly speeds up CGI scripts
 by turning them into persistently running server processes. Scripts that
 perform time-consuming initialization processes, such as loading large
 modules or opening persistent database connections, will see large
 performance improvements.
Homepage: https://metacpan.org/release/CGI-Fast

Package: libcgi-pm-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 478
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 4.68-1
Depends: perl:any, libhtml-parser-perl, liburi-perl
Recommends: libcgi-fast-perl
Description: module for Common Gateway Interface applications
 CGI.pm is a Perl module that provides classes useful for creating Web forms
 and for parsing their contents. It defines CGI objects, entities that contain
 the values of the current query string and other state variables.
Homepage: https://metacpan.org/release/CGI

Package: libchromaprint1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 113
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: chromaprint
Version: 1.5.1-7
Depends: libc6 (>= 2.29), libgcc-s1 (>= 3.4), libstdc++6 (>= 13.1)
Description: audio fingerprint library
 Chromaprint is a library for calculating audio fingerprints
 which are used by the Acoustid service. Its main purpose is to provide an
 accurate identifier for record tracks
Homepage: https://acoustid.org/chromaprint

Package: libcjson1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 86
Maintainer: Maytham Alsudany <maytha8thedev@gmail.com>
Architecture: amd64
Multi-Arch: same
Source: cjson
Version: 1.7.18-3.1+deb13u1
Depends: libc6 (>= 2.14)
Description: Ultralightweight JSON parser in ANSI C
 cJSON is a ultralightweight json parse.
 .
 It aims to be the dumbest possible parser that you can get your job done with.
 .
 It's a single file of C, and a single header file.
 .
 This package contains the shared libraries.
Homepage: https://github.com/DaveGamble/cJSON

Package: libclone-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 42
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libclone-perl (0.47-1)
Version: 0.47-1+b1
Depends: perl (>= 5.40.0-6), perlapi-5.40.0, libc6 (>= 2.14)
Description: module for recursively copying Perl datatypes
 The Clone module provides a clone() method which makes recursive copies of
 nested hash, array, scalar and reference types, including tied variables and
 objects.
 .
 It is faster (although less flexible) than Storable's dclone. Its
 functionality is _not_ serializing in-memory objects (i.e. as
 Data::Dumper or YAML::Dump do), but deep-copying them over to new
 in-memory structures.
Homepage: https://metacpan.org/release/Clone

Package: libcodec2-1.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 16473
Maintainer: A. Maitland Bottoms <bottoms@debian.org>
Architecture: amd64
Multi-Arch: same
Source: codec2
Version: 1.0.5-1
Depends: libc6 (>= 2.32)
Description: Codec2 runtime library
 Next-Generation Digital Voice for Two-Way Radio
 .
 Codec2 is an audio codec especially designed for compressing voice at
 very low bit-rates for applications such as digital voice radio.
 .
 This package contains the codec2 runtime library.
Homepage: http://rowetel.com/codec2.html

Package: libcodec2-1.2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 16506
Maintainer: A. Maitland Bottoms <bottoms@debian.org>
Architecture: amd64
Multi-Arch: same
Source: codec2
Version: 1.2.0-3
Depends: libc6 (>= 2.32)
Description: Codec2 runtime library
 Next-Generation Digital Voice for Two-Way Radio
 .
 Codec2 is an audio codec especially designed for compressing voice at
 very low bit-rates for applications such as digital voice radio.
 .
 This package contains the codec2 runtime library.
Homepage: http://rowetel.com/codec2.html

Package: libcom-err2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 64
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs (1.47.2-3)
Version: 1.47.2-3+b12
Replaces: libcom-err2t64, libcomerr2 (<< 1.43.9-1~)
Provides: libcom-err2t64 (= 1.47.2-3+b12), libcomerr2 (= 1.47.2-3+b12)
Depends: libc6 (>= 2.38)
Breaks: libcom-err2t64 (<< 1.47.0-2.4~exp1~), libcomerr2 (<< 1.43.9-1~)
Description: common error description library
 libcomerr is an attempt to present a common error-handling mechanism to
 manipulate the most common form of error code in a fashion that does not
 have the problems identified with mechanisms commonly in use.
Homepage: http://e2fsprogs.sourceforge.net

Package: libcompress-raw-lzma-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 132
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libcompress-raw-lzma-perl (2.213-1)
Version: 2.213-1+b1
Depends: perl (>= 5.40.0-6), perlapi-5.40.0, libc6 (>= 2.4), liblzma5 (>= 5.1.1alpha+20120614)
Description: low-level interface to lzma compression library
 Compress::Raw::Lzma provides a low-level Perl interface for reading and
 writing of lzma and xz files/buffers.
 .
 Although the primary purpose for the existence of Compress::Raw::Lzma is for
 use by the IO::Compress::Lzma, IO::Uncompress::UnLzma, IO::Compress::Xz and
 IO::Uncompress::UnXz modules (packaged as libio-compress-lzma-perl), it can
 be used on its own for simple compression/uncompression tasks.
Homepage: https://metacpan.org/release/Compress-Raw-Lzma

Package: libconfig-inifiles-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 122
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 3.000003-3+deb13u1
Description: read .ini-style configuration files
 Config::IniFiles provides a way to have readable configuration files
 outside your Perl script. Configurations can be imported (inherited,
 stacked, ...), sections can be grouped, and settings can be accessed
 from a tied hash.
Homepage: https://metacpan.org/release/Config-IniFiles/

Package: libcrypt-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 345
Maintainer: Marco d'Itri <md@linux.it>
Architecture: amd64
Multi-Arch: same
Source: libxcrypt
Version: 1:4.4.38-1
Replaces: libc6-dev (<< 2.29-4), libcrypt1-dev, libcrypt2-dev, manpages-dev (<< 5.01-1)
Provides: libcrypt1-dev
Depends: libcrypt1 (= 1:4.4.38-1)
Breaks: libc6-dev (<< 2.29-4), manpages-dev (<< 5.01-1)
Conflicts: libcrypt1-dev, libcrypt2-dev
Description: libcrypt development files
 This package contains the files needed for developing applications that
 use libcrypt.

Package: libcrypt1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 234
Maintainer: Marco d'Itri <md@linux.it>
Architecture: amd64
Multi-Arch: same
Source: libxcrypt
Version: 1:4.4.38-1
Replaces: libc6 (<< 2.29-4)
Depends: libc6 (>= 2.38)
Conflicts: libpam0g (<< 1.4.0-10)
Description: libcrypt shared library
 libxcrypt is a modern library for one-way hashing of passwords.
 It supports DES, MD5, NTHASH, SUNMD5, SHA-2-256, SHA-2-512, and
 bcrypt-based password hashes
 It provides the traditional Unix 'crypt' and 'crypt_r' interfaces,
 as well as a set of extended interfaces like 'crypt_gensalt'.

Package: libcryptsetup12
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 652
Maintainer: Debian Cryptsetup Team <pkg-cryptsetup-devel@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: same
Source: cryptsetup
Version: 2:2.7.5-2
Depends: libblkid1 (>= 2.24.2), libc6 (>= 2.38), libdevmapper1.02.1 (>= 2:1.02.197), libjson-c5 (>= 0.15), libssl3t64 (>= 3.2.0), libuuid1 (>= 2.16)
Description: disk encryption support - shared library
 Cryptsetup provides an interface for configuring encryption on block
 devices (such as /home or swap partitions), using the Linux kernel
 device mapper target dm-crypt. It features integrated Linux Unified Key
 Setup (LUKS) support.
 .
 This package provides the libcryptsetup shared library.
Homepage: https://gitlab.com/cryptsetup/cryptsetup

Package: libctf-nobfd0
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 293
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: binutils
Version: 2.44-3
Replaces: libbinutils (<< 2.33.50.20191128-1~)
Depends: libc6 (>= 2.14), zlib1g (>= 1:1.2.0)
Breaks: libbinutils (<< 2.33.50.20191128-1~)
Description: Compact C Type Format library (runtime, no BFD dependency)
 This package includes the libctf-nobfd shared library.  The Compact C Type
 Format (CTF) is a way of representing information about a binary program
Homepage: https://www.gnu.org/software/binutils/

Package: libctf0
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 232
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: binutils
Version: 2.44-3
Depends: libbinutils (= 2.44-3), libc6 (>= 2.33), zlib1g (>= 1:1.2.0)
Description: Compact C Type Format library (runtime, BFD dependency)
 This package includes the libctf shared library.  The Compact C Type
 Format (CTF) is a way of representing information about a binary program
Homepage: https://www.gnu.org/software/binutils/

Package: libcups2t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 700
Maintainer: Debian Printing Team <debian-printing@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: cups
Version: 2.4.10-3+deb13u2
Replaces: libcups2
Provides: libcups2 (= 2.4.10-3+deb13u2)
Depends: libavahi-client3 (>= 0.6.16), libavahi-common3 (>= 0.6.16), libc6 (>= 2.38), libgnutls30t64 (>= 3.8.1), libgssapi-krb5-2 (>= 1.17), zlib1g (>= 1:1.2.0)
Suggests: cups-common
Breaks: libcups2 (<< 2.4.10-3+deb13u2)
Description: Common UNIX Printing System(tm) - Core library
 The Common UNIX Printing System (or CUPS(tm)) is a printing system and
 general replacement for lpd and the like.  It supports the Internet
 Printing Protocol (IPP), and has its own filtering driver model for
 handling various document types.
 .
 This package provides the base shared libraries for CUPS.
Homepage: https://github.com/OpenPrinting/cups/

Package: libcurl3t64-gnutls
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 997
Maintainer: Debian Curl Maintainers <team+curl@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: curl
Version: 8.14.1-2+deb13u7
Replaces: libcurl3-gnutls
Provides: libcurl3-gnutls (= 8.14.1-2+deb13u7)
Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.38), libgnutls30t64 (>= 3.8.6), libgssapi-krb5-2 (>= 1.17), libidn2-0 (>= 2.0.0), libldap2 (>= 2.6.2), libnettle8t64, libnghttp2-14 (>= 1.50.0), libnghttp3-9 (>= 0.15.0), libngtcp2-16 (>= 1.1.0), libngtcp2-crypto-gnutls8 (>= 1.1.0), libpsl5t64 (>= 0.16.0), librtmp1 (>= 2.3), libssh2-1t64 (>= 1.11.1), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.2.3.4)
Recommends: ca-certificates
Breaks: libcurl3-gnutls (<< 8.14.1-2+deb13u7)
Description: easy-to-use client-side URL transfer library (GnuTLS flavour)
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 SSL support is provided by GnuTLS.
Homepage: https://curl.se/

Package: libcurl4t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1013
Maintainer: Debian Curl Maintainers <team+curl@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: curl
Version: 8.14.1-2+deb13u7
Replaces: libcurl3, libcurl4
Provides: libcurl4 (= 8.14.1-2+deb13u7)
Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.38), libgssapi-krb5-2 (>= 1.17), libidn2-0 (>= 2.0.0), libldap2 (>= 2.6.2), libnghttp2-14 (>= 1.50.0), libnghttp3-9 (>= 0.15.0), libpsl5t64 (>= 0.16.0), librtmp1 (>= 2.3), libssh2-1t64 (>= 1.11.1), libssl3t64 (>= 3.3.0), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.2.3.4)
Recommends: ca-certificates
Breaks: libcurl4 (<< 8.14.1-2+deb13u7)
Conflicts: libcurl3
Description: easy-to-use client-side URL transfer library (OpenSSL flavour)
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 SSL support is provided by OpenSSL.
Homepage: https://curl.se/

Package: libdata-dump-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 67
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 1.25-1
Depends: perl:any
Description: Perl module to help dump data structures
 Data::Dump provides a single function called dump that takes a list of values
 as its argument and produces a string as its result. The string contains Perl
 code that, when evaled, produces a deep copy of the original arguments. The
 string is formatted for easy reading.
 .
 If called in void context, the dump is printed on standard error instead of
 being returned. If you don't like importing a function that overrides Perl's
 not-so-useful builtin, then you can also import the same function as "pp"
 (the mnemonic for "pretty-print").
Homepage: https://metacpan.org/release/Data-Dump

Package: libdatrie1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 77
Maintainer: Theppitak Karoonboonyanan <thep@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libdatrie (0.2.13-3)
Version: 0.2.13-3+b1
Depends: libc6 (>= 2.14)
Description: Double-array trie library
 This package provides shared libraries needed to run programs that use the
 datrie library. It is usually automatically installed.
Homepage: https://linux.thai.net/projects/libthai

Package: libdav1d-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 131
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: dav1d
Version: 1.5.1-1
Depends: libdav1d7 (= 1.5.1-1)
Description: fast and small AV1 video stream decoder (development files)
 dav1d is an AOMedia Video 1 (AV1) cross-platform decoder and focused on speed
 and correctness.
 .
 dav1d supports the following features:
  * support for all features of the AV1 bitstream
  * support for all bitdepth, 8, 10 and 12bits
  * support for all chroma subsamplings 4:2:0, 4:2:2, 4:4:4 and grayscale
  * full acceleration for AVX-2 chips
  * full acceleration for SSSE3+ chips
  * full acceleration for ARMv8 chips
  * partial acceleration for ARMv7 chips
 .
 This package provides the development files for libdav1d.
Homepage: https://www.videolan.org/projects/dav1d.html

Package: libdav1d6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1616
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: dav1d
Version: 1.0.0-2+deb12u1
Depends: libc6 (>= 2.34)
Description: fast and small AV1 video stream decoder (shared library)
 dav1d is an AOMedia Video 1 (AV1) cross-platform decoder and focused on speed
 and correctness.
 .
 dav1d supports the following features:
  * support for all features of the AV1 bitstream
  * support for all bitdepth, 8, 10 and 12bits
  * support for all chroma subsamplings 4:2:0, 4:2:2, 4:4:4 and grayscale
  * full acceleration for AVX-2 chips
  * full acceleration for SSSE3+ chips
  * full acceleration for ARMv8 chips
  * partial acceleration for ARMv7 chips
 .
 This package provides the shared library.
Homepage: https://www.videolan.org/projects/dav1d.html

Package: libdav1d7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1730
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: dav1d
Version: 1.5.1-1
Depends: libc6 (>= 2.34)
Description: fast and small AV1 video stream decoder (shared library)
 dav1d is an AOMedia Video 1 (AV1) cross-platform decoder and focused on speed
 and correctness.
 .
 dav1d supports the following features:
  * support for all features of the AV1 bitstream
  * support for all bitdepth, 8, 10 and 12bits
  * support for all chroma subsamplings 4:2:0, 4:2:2, 4:4:4 and grayscale
  * full acceleration for AVX-2 chips
  * full acceleration for SSSE3+ chips
  * full acceleration for ARMv8 chips
  * partial acceleration for ARMv7 chips
 .
 This package provides the shared library.
Homepage: https://www.videolan.org/projects/dav1d.html

Package: libdb5.3t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1854
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: amd64
Multi-Arch: same
Source: db5.3
Version: 5.3.28+dfsg2-9
Replaces: libdb5.3
Provides: libdb5.3 (= 5.3.28+dfsg2-9)
Depends: libc6 (>= 2.38)
Breaks: libdb5.3 (<< 5.3.28+dfsg2-9)
Description: Berkeley v5.3 Database Libraries [runtime]
 This is the runtime package for programs that use the v5.3 Berkeley
 database library.
Homepage: http://www.oracle.com/technetwork/database/database-technologies/berkeleydb/overview/index.html

Package: libdbd-mariadb-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 263
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: libdbd-mariadb-perl (1.22-1)
Version: 1.22-1+b4
Depends: perl (>= 5.40.0-6), perl-dbdabi-94, perlapi-5.40.0, libc6 (>= 2.15), libmariadb3 (>= 3.0.0), libdbi-perl
Description: Perl5 database interface to the MariaDB/MySQL databases
 DBD::MariaDB is a Perl5 Database Interface driver for the MariaDB/MySQL
 databases. In other words: DBD::MariaDB is an interface between the Perl
 programming language and the MariaDB/MySQL programming API that comes with
 the MariaDB/MySQL relational database management systems. Most functions
 provided by this programming API are supported.
 .
 DBD::MariaDB is a fork of DBD::mysql (libdbd-mysql-perl) with inprovements in
 MariaDB compatibility, Perl Unicode support, and some security related bug
 fixes, at the cost of not being 100% backwards compatible.
Homepage: https://metacpan.org/release/DBD-MariaDB

Package: libdbi-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 2545
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Version: 1.652-2~deb13u1
Provides: dh-sequence-perl-dbi, perl-dbdabi-94
Depends: perl (>= 5.40.1-6), perlapi-5.40.1, libc6 (>= 2.38)
Suggests: libclone-perl (>= 0.47), libmldbm-perl, libnet-daemon-perl, libsql-statement-perl
Description: Perl Database Interface (DBI)
 DBI (DataBase Interface) is a Perl framework that provides a common interface
 to access various backend databases in a uniform manner. DBD (DataBase Driver)
 modules provide implementations for various backend data storage mechanisms
 including networked relational databases (particularly SQL databases) and even
 web services such as the Google search engine.
 .
 It is extremely portable and available for a wide range of operating systems,
 architectures and data stores, including:
 .
  * Oracle
  * Microsoft SQL Server
  * IBM DB2
  * SQLite
  * PostgreSQL
  * Firebird
  * MySQL
Homepage: https://dbi.perl.org/

Package: libdbus-1-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 445
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: dbus
Version: 1.16.2-2
Depends: libc6 (>= 2.38), libsystemd0
Recommends: dbus
Description: simple interprocess messaging system (library)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more. It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML. D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 It comes with several bindings, including GLib, Python, Qt and Java.
 .
 The message bus daemon can be found in the dbus-daemon package.
Homepage: https://dbus.freedesktop.org/

Package: libdc1394-25
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 280
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libdc1394
Version: 2.2.6-5
Depends: libc6 (>= 2.34), libraw1394-11 (>= 2.1.2), libusb-1.0-0 (>= 2:1.0.9)
Description: high level programming interface for IEEE 1394 digital cameras
 libdc1394 is a library that is intended to provide a high level
 programming interface for application developers who wish to control
 IEEE 1394 based cameras that conform to the 1394-based Digital Camera
 Specification (found at http://www.1394ta.org/).
 .
 This version of libdc1394 supports both the old and new (juju) FireWire stack.
 It automatically detects which one to use at runtime.
 .
 This package contains shared libraries.
Homepage: https://sourceforge.net/projects/libdc1394/

Package: libde265-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 490
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libde265
Version: 1.0.15-1+deb13u2
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.0), libstdc++6 (>= 13.1)
Description: Open H.265 video codec implementation
 libde265 is an open source implementation of the H.265 video codec.
 It is written from scratch in plain C for simplicity and efficiency.
 Its simple API makes it easy to integrate it into other software.
Homepage: https://github.com/strukturag/libde265

Package: libde265-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 47
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libde265
Version: 1.0.15-1+deb13u2
Depends: libde265-0 (= 1.0.15-1+deb13u2)
Description: Open H.265 video codec implementation - development files
 libde265 is an open source implementation of the H.265 video codec.
 It is written from scratch in plain C for simplicity and efficiency.
 Its simple API makes it easy to integrate it into other software.
 .
 The development headers for compiling programs that use libde265
 are provided by this package.
Homepage: https://github.com/strukturag/libde265

Package: libdebconfclient0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 38
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: cdebconf
Version: 0.280
Depends: libc6 (>= 2.38)
Description: Debian Configuration Management System (C-implementation library)
 Debconf is a configuration management system for Debian packages. It is
 used by some packages to prompt you for information before they are
 installed. cdebconf is a reimplementation of the original debconf in C.
 .
 This library allows C programs to interface with cdebconf.

Package: libdecor-0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 62
Maintainer: Debian SDL packages maintainers <pkg-sdl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libdecor-0
Version: 0.2.2-2
Replaces: libdecor
Depends: libc6 (>= 2.38), libwayland-client0 (>= 1.20.0)
Recommends: default-libdecor-0-plugin-1 | libdecor-0-plugin-1
Conflicts: libdecor
Description: client-side window decoration library
 libdecor is a library that can help Wayland clients draw window
 decorations for them. It aims to provide multiple backends that implements the
 decoration drawing.
 .
 This package contains the runtime library.
Homepage: https://gitlab.freedesktop.org/libdecor/libdecor

Package: libdecor-0-plugin-1-cairo
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 74
Maintainer: Debian SDL packages maintainers <pkg-sdl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libdecor-0
Version: 0.2.2-2
Replaces: libdecor-plugin-cairo
Provides: libdecor-0-plugin-1
Depends: libc6 (>= 2.38), libcairo2 (>= 1.14.0), libdbus-1-3 (>= 1.9.14), libdecor-0-0 (= 0.2.2-2), libglib2.0-0t64 (>= 2.12.0), libpango-1.0-0 (>= 1.14.0), libpangocairo-1.0-0 (>= 1.14.0), libwayland-client0 (>= 1.20.0), libwayland-cursor0 (>= 1.0.2)
Conflicts: libdecor-plugin-cairo
Description: libdecor decoration plugin using Cairo
 libdecor is a library that can help Wayland clients draw window
 decorations for them. It aims to provide multiple backends that implements the
 decoration drawing.
 .
 This package contains a backend that draws window decorations using Cairo.
Homepage: https://gitlab.freedesktop.org/libdecor/libdecor

Package: libdeflate-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 150
Maintainer: Deflate Team <libdeflate@packages.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libdeflate
Version: 1.23-2
Depends: libdeflate0 (= 1.23-2)
Description: headers for whole-buffer compression and decompression library
 The supported formats are:
  * DEFLATE (raw)
  * zlib (a.k.a. DEFLATE with a zlib wrapper)
  * gzip (a.k.a. DEFLATE with a gzip wrapper)
 .
 libdeflate is heavily optimized. It is significantly faster than the zlib
 library, both for compression and decompression, and especially on x86
 processors. In addition, libdeflate provides optional high compression modes
 that provide a better compression ratio than the zlib's "level 9".
 .
 This package provides the development headers.
Homepage: https://github.com/ebiggers/libdeflate

Package: libdeflate0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 102
Maintainer: Deflate Team <libdeflate@packages.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libdeflate
Version: 1.23-2
Depends: libc6 (>= 2.14)
Description: fast, whole-buffer DEFLATE-based compression and decompression
 The supported formats are:
  * DEFLATE (raw)
  * zlib (a.k.a. DEFLATE with a zlib wrapper)
  * gzip (a.k.a. DEFLATE with a gzip wrapper)
 .
 libdeflate is heavily optimized. It is significantly faster than the zlib
 library, both for compression and decompression, and especially on x86
 processors. In addition, libdeflate provides optional high compression modes
 that provide a better compression ratio than the zlib's "level 9".
Homepage: https://github.com/ebiggers/libdeflate

Package: libdevmapper1.02.1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 481
Maintainer: Debian LVM Team <team+lvm@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: lvm2 (2.03.31-2)
Version: 2:1.02.205-2
Depends: libc6 (>= 2.38), libselinux1 (>= 3.1~), libudev1 (>= 183), dmsetup (>= 2:1.02.205-2~)
Description: Linux Kernel Device Mapper userspace library
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but software raid,
 and other drivers that create "virtual" block devices.
 .
 This package contains the (user-space) shared library for accessing the
 device-mapper; it allows usage of the device-mapper through a clean,
 consistent interface (as opposed to through kernel ioctls).
Homepage: https://sourceware.org/lvm2/

Package: libdjvulibre-text
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 340
Maintainer: Barak A. Pearlmutter <bap@debian.org>
Architecture: all
Multi-Arch: foreign
Source: djvulibre
Version: 3.5.28-2.2
Replaces: djview3 (= 3.5.20-9), djvulibre-desktop (<< 3.5.20-9), libdjvulibre15
Description: Linguistic support files for libdjvulibre
 Runtime linguistic support files for the libdjvulibre library.
Homepage: http://djvu.sourceforge.net/

Package: libdjvulibre21
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1837
Maintainer: Barak A. Pearlmutter <bap@debian.org>
Architecture: amd64
Multi-Arch: same
Source: djvulibre
Version: 3.5.28-2.2
Replaces: libdjvulibre1, libdjvulibre15
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.0), libjpeg62-turbo (>= 1.3.1), libstdc++6 (>= 14), libdjvulibre-text (>= 3.5.28-2.2)
Conflicts: libdjvulibre1
Description: Runtime support for the DjVu image format
 DjVu runtime library.
Homepage: http://djvu.sourceforge.net/

Package: libdpkg-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 2091
Maintainer: Dpkg Developers <debian-dpkg@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: dpkg
Version: 1.22.22
Depends: perl:any, dpkg (>= 1.18.11)
Recommends: libfile-fcntllock-perl, liblocale-gettext-perl, bzip2, xz-utils (>= 5.4.0)
Suggests: debian-keyring, debian-tag2upload-keyring, sq | sqop | rsop | gosop | pgpainless-cli | gpg-sq | gnupg, sqv | sqopv | rsopv | sopv | gosop | pgpainless-cli | gpgv-sq | gpgv, gcc | c-compiler, binutils, patch, sensible-utils, git, bzr
Breaks: dgit (<< 3.13~), gosop (<< 1.1.0~), libsop-java-java (<< 4.0.7~), pgpainless-cli (<< 1.3.13~), pkg-kde-tools (<< 0.15.28~), rsop (<< 0.4.0~), sq (<< 0.40.0~), sqop (<< 0.27.2~), sqv (<< 1.3.0~)
Description: Dpkg perl modules
 This package provides the perl modules used by the scripts
 in dpkg-dev. They cover a wide range of functionality. Among them
 there are the following public modules:
 .
  - Dpkg: core variables
  - Dpkg::Arch: architecture handling functions
  - Dpkg::BuildFlags: set, modify and query compilation build flags
  - Dpkg::BuildInfo: build information functions
  - Dpkg::BuildOptions: parse and manipulate DEB_BUILD_OPTIONS
  - Dpkg::BuildProfiles: parse and manipulate build profiles
  - Dpkg::Changelog: parse changelogs
  - Dpkg::Changelog::Entry: represents a changelog entry
  - Dpkg::Changelog::Parse: generic changelog parser for dpkg-parsechangelog
  - Dpkg::Checksums: generate and parse checksums
  - Dpkg::Compression: simple database of available compression methods
  - Dpkg::Compression::FileHandle: transparently (de)compress files
  - Dpkg::Compression::Process: wrapper around compression tools
  - Dpkg::Conf: parse dpkg configuration files
  - Dpkg::Control: parse and manipulate Debian control information
    (.dsc, .changes, Packages/Sources entries, etc.)
  - Dpkg::Control::Changelog: represent fields output by dpkg-parsechangelog
  - Dpkg::Control::Fields: manage (list of known) control fields
  - Dpkg::Control::Hash: parse and manipulate a block of RFC822-like fields
  - Dpkg::Control::Info: parse files like debian/control
  - Dpkg::Control::Tests: parse files like debian/tests/control
  - Dpkg::Control::Tests::Entry: represents a debian/tests/control stanza
  - Dpkg::Deps: parse and manipulate dependencies
  - Dpkg::Deps::Simple: represents a single dependency statement
  - Dpkg::Deps::Multiple: base module to represent multiple dependencies
  - Dpkg::Deps::Union: list of unrelated dependencies
  - Dpkg::Deps::AND: list of AND dependencies
  - Dpkg::Deps::OR: list of OR dependencies
  - Dpkg::Deps::KnownFacts: list of installed and virtual packages
  - Dpkg::Exit: push, pop and run exit handlers
  - Dpkg::Gettext: wrapper around Locale::gettext
  - Dpkg::IPC: spawn sub-processes and feed/retrieve data
  - Dpkg::Index: collections of Dpkg::Control (Packages/Sources files for
    example)
  - Dpkg::Interface::Storable: base object serializer
  - Dpkg::Path: common path handling functions
  - Dpkg::Source::Format: manipulate debian/source/format files
  - Dpkg::Source::Package: extract Debian source packages
  - Dpkg::Substvars: substitute variables in strings
  - Dpkg::Vendor: identify current distribution vendor
  - Dpkg::Version: parse and manipulate Debian package versions
 .
 All the packages listed in Suggests or Recommends are used by some of the
 modules.
Homepage: https://wiki.debian.org/Teams/Dpkg

Package: libdrm-amdgpu1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 81
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libdrm
Version: 2.4.124-2
Depends: libc6 (>= 2.38), libdrm2 (>= 2.4.108)
Description: Userspace interface to amdgpu-specific kernel DRM services -- runtime
 This library implements the userspace interface to the kernel DRM
 services.  DRM stands for "Direct Rendering Manager", which is the
 kernelspace portion of the "Direct Rendering Infrastructure" (DRI).
 The DRI is currently used on Linux to provide hardware-accelerated
 OpenGL drivers.
Homepage: https://gitlab.freedesktop.org/mesa/drm/

Package: libdrm-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 45
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: libdrm
Version: 2.4.124-2
Description: Userspace interface to kernel DRM services -- common files
 This library implements the userspace interface to the kernel DRM
 services.  DRM stands for "Direct Rendering Manager", which is the
 kernelspace portion of the "Direct Rendering Infrastructure" (DRI).
 The DRI is currently used on Linux to provide hardware-accelerated
 OpenGL drivers.
 .
 This package provides common files for libdrm.
Homepage: https://gitlab.freedesktop.org/mesa/drm/

Package: libdrm-intel1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 182
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libdrm
Version: 2.4.124-2
Depends: libc6 (>= 2.34), libdrm2 (>= 2.4.108), libpciaccess0
Description: Userspace interface to intel-specific kernel DRM services -- runtime
 This library implements the userspace interface to the kernel DRM
 services.  DRM stands for "Direct Rendering Manager", which is the
 kernelspace portion of the "Direct Rendering Infrastructure" (DRI).
 The DRI is currently used on Linux to provide hardware-accelerated
 OpenGL drivers.
Homepage: https://gitlab.freedesktop.org/mesa/drm/

Package: libdrm-nouveau2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 71
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libdrm
Version: 2.4.124-2
Depends: libc6 (>= 2.38), libdrm2 (>= 2.4.108)
Description: Userspace interface to nouveau-specific kernel DRM services -- runtime
 This library implements the userspace interface to the kernel DRM
 services.  DRM stands for "Direct Rendering Manager", which is the
 kernelspace portion of the "Direct Rendering Infrastructure" (DRI).
 The DRI is currently used on Linux to provide hardware-accelerated
 OpenGL drivers.
Homepage: https://gitlab.freedesktop.org/mesa/drm/

Package: libdrm-radeon1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 83
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libdrm
Version: 2.4.124-2
Depends: libc6 (>= 2.4), libdrm2 (>= 2.4.108)
Description: Userspace interface to radeon-specific kernel DRM services -- runtime
 This library implements the userspace interface to the kernel DRM
 services.  DRM stands for "Direct Rendering Manager", which is the
 kernelspace portion of the "Direct Rendering Infrastructure" (DRI).
 The DRI is currently used on Linux to provide hardware-accelerated
 OpenGL drivers.
Homepage: https://gitlab.freedesktop.org/mesa/drm/

Package: libdrm2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 128
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libdrm
Version: 2.4.124-2
Depends: libdrm-common (>= 2.4.124-2), libc6 (>= 2.38)
Description: Userspace interface to kernel DRM services -- runtime
 This library implements the userspace interface to the kernel DRM
 services.  DRM stands for "Direct Rendering Manager", which is the
 kernelspace portion of the "Direct Rendering Infrastructure" (DRI).
 The DRI is currently used on Linux to provide hardware-accelerated
 OpenGL drivers.
 .
 This package provides the runtime environment for libdrm.
Homepage: https://gitlab.freedesktop.org/mesa/drm/

Package: libduktape207
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 319
Maintainer: Debian IoT Maintainers <debian-iot-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: duktape (2.7.0-2)
Version: 2.7.0-2+b2
Depends: libc6 (>= 2.38)
Description: embeddable Javascript engine, library
 Duktape is an embeddable Javascript engine, with a focus on portability
 and compact footprint.
 .
 Duktape is easy to integrate into a C/C++ project: add duktape.c, duktape.h,
 and duk_config.h to your build, and use the Duktape API to call Ecmascript
 functions from C code and vice versa.
 .
 This package contains the shared library.
Homepage: https://duktape.org

Package: libdvdnav4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 132
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libdvdnav (6.1.1-3)
Version: 6.1.1-3+b1
Depends: libc6 (>= 2.4), libdvdread8t64 (>= 6.1.0)
Suggests: libdvdcss2
Description: DVD navigation library
 libdvdnav is a DVD navigation library, which provides an interface to the
 advanced features of DVDs, like menus and navigation. It contains the VM and
 other parts useful for writing DVD players. It's based on Ogle, but was
 modified to be used by xine and mplayer.
Homepage: https://www.videolan.org/developers/libdvdnav.html

Package: libdvdread8t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 191
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libdvdread
Version: 6.1.3-2
Replaces: libdvdread8
Provides: libdvdread8 (= 6.1.3-2)
Depends: libc6 (>= 2.34)
Suggests: libdvdcss2
Breaks: libdvdread8 (<< 6.1.3-2)
Description: library for reading DVDs
 libdvdread provides the functionality that is required to access many DVDs. It
 parses IFO files, reads NAV-blocks, and performs CSS authentication and
 descrambling.
 .
 libdvdread probes for libdvdcss at runtime and if found, will use it to
 decrypt sections of the DVD as necessary. libdvdcss needs to be installed from
 third-party repositories (see README.css), it's not included in Debian.
Homepage: https://www.videolan.org/developers/libdvdnav.html

Package: libdw1t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 789
Maintainer: Debian Elfutils Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: elfutils
Version: 0.192-4
Replaces: libdw1
Provides: libdw1 (= 0.192-4)
Depends: libbz2-1.0, libc6 (>= 2.38), libelf1t64 (= 0.192-4), liblzma5 (>= 5.1.1alpha+20120614), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.2.2.3)
Breaks: libdw1 (<< 0.192-4)
Description: library that provides access to the DWARF debug information
 libdw1t64 provides a library that provides access to DWARF debug information
 stored inside ELF files.
 .
 This library is part of elfutils.
Homepage: https://sourceware.org/elfutils/

Package: libedit2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 262
Maintainer: LLVM Packaging Team <pkg-llvm-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libedit
Version: 3.1-20250104-1
Replaces: libedit-dev (<< 3.1-20180525-2~)
Depends: libbsd0 (>= 0.1.3), libc6 (>= 2.38), libtinfo6 (>= 6)
Description: BSD editline and history libraries
 Command line editor library provides generic line editing,
 history, and tokenization functions.
 .
 It slightly resembles GNU readline.
Homepage: https://www.thrysoee.dk/editline/

Package: libefiboot1t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 138
Maintainer: Debian UEFI Maintainers <debian-efi@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: efivar (38-3.1)
Version: 38-3.1+b1
Replaces: libefiboot1
Provides: libefiboot1 (= 38-3.1+b1)
Depends: libc6 (>= 2.38), libefivar1t64 (>= 38)
Breaks: libefiboot1 (<< 38-3.1)
Description: Library to manage UEFI variables
 Library to allow for the manipulation of UEFI variables related to booting.
Homepage: https://github.com/rhinstaller/efivar

Package: libefivar1t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 227
Maintainer: Debian UEFI Maintainers <debian-efi@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: efivar (38-3.1)
Version: 38-3.1+b1
Replaces: libefivar1
Provides: libefivar1 (= 38-3.1+b1)
Depends: libc6 (>= 2.38)
Breaks: libefivar1 (<< 38-3.1)
Description: Library to manage UEFI variables
 Library to allow for the simple manipulation of UEFI variables.
Homepage: https://github.com/rhinstaller/efivar

Package: libegl-mesa0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 414
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: mesa
Version: 25.0.7-2+deb13u1
Provides: libegl-vendor
Depends: libc6 (>= 2.38), libdrm2 (>= 2.4.121), libexpat1 (>= 2.0.1), libgbm1 (= 25.0.7-2+deb13u1), libgcc-s1 (>= 3.4), libwayland-client0 (>= 1.23.0), libwayland-server0 (>= 1.15.0), libx11-xcb1, libxcb-dri3-0 (>= 1.13), libxcb-present0, libxcb-randr0 (>= 1.3), libxcb-shm0, libxcb-xfixes0, libxcb1 (>= 1.6), mesa-libgallium (= 25.0.7-2+deb13u1)
Description: free implementation of the EGL API -- Mesa vendor library
 This package contains the EGL native platform graphics interface library.
 EGL provides a platform-agnostic mechanism for creating rendering surfaces
 for use with other graphics libraries, such as OpenGL|ES.
 .
 This package contains the Mesa vendor library for EGL.
Homepage: https://mesa3d.org/

Package: libegl1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 116
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libglvnd (1.7.0-1)
Version: 1.7.0-1+b2
Depends: libc6 (>= 2.38), libglvnd0 (= 1.7.0-1+b2), libegl-mesa0
Description: Vendor neutral GL dispatch library -- EGL support
 This is an implementation of the vendor-neutral dispatch layer for
 arbitrating OpenGL API calls between multiple vendors on a per-screen basis.
 .
 This package contains support for EGL.
Homepage: https://gitlab.freedesktop.org/glvnd/libglvnd

Package: libelf1t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1228
Maintainer: Debian Elfutils Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: elfutils
Version: 0.192-4
Replaces: libelf1
Provides: libelf1 (= 0.192-4)
Depends: libc6 (>= 2.38), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4)
Breaks: libelf1 (<< 0.192-4)
Description: library to read and write ELF files
 The libelf1t64 package provides a shared library which allows reading and
 writing ELF files on a high level.  Third party programs depend on
 this package to read internals of ELF files.  The programs of the
 elfutils package use it also to generate new ELF files.
 .
 This library is part of elfutils.
Homepage: https://sourceware.org/elfutils/

Package: libencode-locale-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 33
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.05-3
Depends: perl:any
Description: utility to determine the locale encoding
 In many applications it's wise to let Perl use Unicode for the strings it
 processes. Most of the interfaces Perl has to the outside world are still byte
 based. Programs therefore need to decode byte strings that enter the program
 from the outside and encode them again on the way out.
 .
 The POSIX locale system is used to specify both the language conventions
 requested by the user and the preferred character set to consume and output.
 The Encode::Locale module looks up the charset and encoding (called a CODESET
 in the locale jargon) and arranges for the Encode module to know this encoding
 under the name "locale". It means bytes obtained from the environment can be
 converted to Unicode strings by calling Encode::encode(locale => $bytes) and
 converted back again with Encode::decode(locale => $string).
Homepage: https://metacpan.org/release/Encode-Locale

Package: libepoxy0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1363
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libepoxy
Version: 1.5.10-2
Depends: libc6 (>= 2.34)
Description: OpenGL function pointer management library
 It hides the complexity of dlopen(), dlsym(), glXGetProcAddress(),
 eglGetProcAddress(), etc. from the app developer, with very little
 knowledge needed on their part.  They get to read GL specs and write
 code using undecorated function names like glCompileShader().
Homepage: https://github.com/anholt/libepoxy

Package: liberror-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 71
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.17030-1
Depends: perl:any
Description: Perl module for error/exception handling in an OO-ish way
 The Error module provides two interfaces.  Firstly "Error" provides a
 procedural interface to exception handling. Secondly "Error" is a base class
 for errors/exceptions that can either be thrown, for subsequent catch, or can
 simply be recorded.
 .
 Errors in the class "Error" should not be thrown directly, but the user
 should throw errors from a sub-class of "Error".
 .
 Warning: Using the "Error" module is no longer recommended due to the
 black-magical nature of its syntactic sugar, which often tends to break. Its
 maintainers have stopped actively writing code that uses it, and discourage
 people from doing so.
 .
 Recommended alternatives are Exception::Class (libexception-class-perl),
 Error::Exception (not packaged), TryCatch (libtrycatch-perl), and Try::Tiny
 (libtry-tiny-perl).
Homepage: https://metacpan.org/release/Error

Package: libevent-2.1-7t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 443
Maintainer: Nicolas Mora <babelouest@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libevent
Version: 2.1.13-stable-1~deb13u1
Replaces: libevent-2.1-7
Provides: libevent-2.1-7 (= 2.1.13-stable-1~deb13u1)
Depends: libc6 (>= 2.38)
Breaks: libevent-2.1-7 (<< 2.1.13-stable-1~deb13u1)
Description: Asynchronous event notification library
 Libevent is an asynchronous event notification library that provides a
 mechanism to execute a callback function when a specific event occurs
 on a file descriptor or after a timeout has been reached.
 .
 It is meant to replace the asynchronous event loop found in
 event driven network servers. Currently, libevent supports /dev/poll,
 kqueue(2), event ports, select(2), poll(2) and epoll(4).
 .
 For backward compatibility and to transition to "libevent_core only"
 or "libevent_core + libevent_extra", the libevent source package builds
 the libevent library that includes everything in libevent_core and
 libevent_extra.
Homepage: https://libevent.org/

Package: libevent-core-2.1-7t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 306
Maintainer: Nicolas Mora <babelouest@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libevent
Version: 2.1.13-stable-1~deb13u1
Replaces: libevent-core-2.1-7
Provides: libevent-core-2.1-7 (= 2.1.13-stable-1~deb13u1)
Depends: libc6 (>= 2.38)
Breaks: libevent-core-2.1-7 (<< 2.1.13-stable-1~deb13u1)
Description: Asynchronous event notification library (core)
 Libevent is an asynchronous event notification library that provides a
 mechanism to execute a callback function when a specific event occurs
 on a file descriptor or after a timeout has been reached.
 .
 It is meant to replace the asynchronous event loop found in
 event driven network servers. Currently, libevent supports /dev/poll,
 kqueue(2), event ports, select(2), poll(2) and epoll(4).
 .
 The libevent_core library includes event loops, timers, buffer code,
 and various small compatibility functions.
 .
 If you're writing software that only uses libevent's event loop, you
 should link against only the libevent_core library.
Homepage: https://libevent.org/

Package: libexpat1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 427
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: expat
Version: 2.9.0-1~deb13u1
Pre-Depends: libc6 (>= 2.36)
Description: XML parsing C library - runtime library
 This package contains the runtime, shared library of expat, the C
 library for parsing XML. Expat is a stream-oriented parser in
 which an application registers handlers for things the parser
 might find in the XML document (like start tags).
Homepage: https://libexpat.github.io/

Package: libext2fs2t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 557
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs (1.47.2-3)
Version: 1.47.2-3+b12
Replaces: e2fslibs (<< 1.43.9-1~), libext2fs2
Provides: e2fslibs (= 1.47.2-3+b12), libext2fs2 (= 1.47.2-3+b12)
Depends: libc6 (>= 2.38)
Breaks: e2fslibs (<< 1.43.9-1~), libext2fs2 (<< 1.47.2-3)
Description: ext2/ext3/ext4 file system libraries
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package provides the ext2fs and e2p libraries, for userspace software
 that directly accesses extended file systems. Programs that use libext2fs
 include e2fsck, mke2fs, and tune2fs. Programs that use libe2p include
 dumpe2fs, chattr, and lsattr.
Homepage: http://e2fsprogs.sourceforge.net

Package: libfakeroot
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 157
Maintainer: Clint Adams <clint@debian.org>
Architecture: amd64
Multi-Arch: same
Source: fakeroot
Version: 1.37.1.1-1
Replaces: fakeroot (<< 1.20-2~)
Depends: libc6 (>= 2.38)
Breaks: fakeroot (<< 1.20-2~)
Conffiles:
 /etc/ld.so.conf.d/fakeroot-x86_64-linux-gnu.conf f9f2331782e9078d5472c77e1d9cd869
Description: tool for simulating superuser privileges - shared libraries
 fakeroot provides a fake "root environment" by means of LD_PRELOAD and
 SysV IPC (or TCP) trickery. It puts wrappers around getuid(), chown(),
 stat(), and other file-manipulation functions, so that unprivileged
 users can (for instance) populate .deb archives with root-owned files;
 various build tools use fakeroot for this by default.
 .
 This package contains the LD_PRELOAD libraries.

Package: libfcgi-bin
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 41
Maintainer: Boris Pek <tehnick@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: libfcgi
Version: 2.4.5-0.1
Replaces: libfcgi0t64 (<< 2.4.0-8.4)
Depends: libc6 (>= 2.34), libfcgi0t64 (>= 2.4.5)
Breaks: libfcgi0t64 (<< 2.4.0-8.4)
Description: FastCGI bridge from CGI
 FastCGI is a language independent, scalable, open extension
 to CGI that provides high performance without the limitations
 of server specific APIs.
 .
 This package contains the cgi-fcgi utility to bridge between CGI
 and FastCGI.
Homepage: https://github.com/FastCGI-Archives

Package: libfcgi-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 71
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: libfcgi-perl (0.82+ds-3)
Version: 0.82+ds-3+b2
Depends: perl (>= 5.40.0-6), perlapi-5.40.0, libc6 (>= 2.4), libfcgi0t64 (>= 2.4.2)
Description: helper module for FastCGI
 FCGI is a simple Perl module for writing FastCGI applications. FastCGI is a
 language-independent, scalable, open extension to CGI that provides faster
 performance by keeping programs persistent in memory and allowing them to
 handle multiple requests. This module provides the core interface needed to
 write these applications.
 .
 For complex applications, you should consider a more full-featured solution
 such as Plack or Catalyst (see libcatalyst-perl).
Homepage: https://metacpan.org/release/FCGI

Package: libfcgi0t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 92
Maintainer: Boris Pek <tehnick@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libfcgi
Version: 2.4.5-0.1
Replaces: libfcgi0, libfcgi0c2, libfcgi0ldbl
Provides: libfcgi, libfcgi0ldbl (= 2.4.5-0.1)
Depends: libc6 (>= 2.15), libgcc-s1 (>= 3.0), libstdc++6 (>= 13.1)
Recommends: libfcgi-bin (= 2.4.5-0.1)
Breaks: libfcgi0ldbl (<< 2.4.5-0.1)
Conflicts: libfcgi0, libfcgi0c2
Description: shared library of FastCGI
 FastCGI is a language independent, scalable, open extension
 to CGI that provides high performance without the limitations
 of server specific APIs.
 .
 This package contains the shared libraries.
Homepage: https://github.com/FastCGI-Archives

Package: libfdisk1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 588
Maintainer: Chris Hofstaedtler <zeha@debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.41.5-0+deb13u1
Depends: libblkid1 (= 2.41.5-0+deb13u1), libc6 (>= 2.38), libuuid1 (= 2.41.5-0+deb13u1)
Description: fdisk partitioning library
 The libfdisk library is used for manipulating partition tables. It is
 the core of the fdisk, cfdisk, and sfdisk tools.
Homepage: https://github.com/util-linux/util-linux

Package: libffi8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 72
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libffi
Version: 3.4.8-2
Replaces: libffi8ubuntu1 (<< 3.4.2-1)
Provides: libffi8ubuntu1 (= 3.4.8-2)
Depends: libc6 (>= 2.34)
Breaks: libffi8ubuntu1 (<< 3.4.2-1)
Description: Foreign Function Interface library runtime
 A foreign function interface is the popular name for the interface that
 allows code written in one language to call code written in another
 language.
Homepage: https://sourceware.org/libffi/

Package: libfftw3-bin
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 259
Maintainer: Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: fftw3 (3.3.10-2)
Version: 3.3.10-2+b1
Depends: libc6 (>= 2.34), libfftw3-double3 (>= 3.3.10), libfftw3-long3 (>= 3.3.10), libfftw3-quad3 (>= 3.3.10), libfftw3-single3 (>= 3.3.10)
Description: Library for computing Fast Fourier Transforms - Tools
 The FFTW library computes Fast Fourier Transforms (FFT) in one or more
 dimensions. It is extremely fast.
 .
 This package contains the wisdom management tools.
Homepage: https://fftw.org

Package: libfftw3-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 15592
Maintainer: Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: fftw3 (3.3.10-2)
Version: 3.3.10-2+b1
Depends: libfftw3-bin (= 3.3.10-2+b1), libfftw3-double3 (= 3.3.10-2+b1), libfftw3-long3 (= 3.3.10-2+b1), libfftw3-quad3 (= 3.3.10-2+b1), libfftw3-single3 (= 3.3.10-2+b1)
Suggests: libfftw3-doc
Description: Library for computing Fast Fourier Transforms - development
 The FFTW library computes Fast Fourier Transforms (FFT) in one or more
 dimensions. It is extremely fast. This package contains the statically linked
 library, header files and test programs.
 .
 This package contains the header files and static libraries.
 For documentation, see libfftw3-doc.
Homepage: https://fftw.org

Package: libfftw3-double3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2304
Maintainer: Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: fftw3 (3.3.10-2)
Version: 3.3.10-2+b1
Depends: libc6 (>= 2.34), libgomp1 (>= 4.9)
Suggests: libfftw3-bin, libfftw3-dev
Description: Library for computing Fast Fourier Transforms - Double precision
 The FFTW library computes Fast Fourier Transforms (FFT) in one or more
 dimensions. It is extremely fast. This package contains the shared library
 for double precision transforms.
 .
 To get the static library and the header files, you need to install
 libfftw3-dev. For documentation, see libfftw3-doc.
Homepage: https://fftw.org

Package: libfftw3-long3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1108
Maintainer: Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: fftw3 (3.3.10-2)
Version: 3.3.10-2+b1
Depends: libc6 (>= 2.34), libgomp1 (>= 4.9)
Suggests: libfftw3-bin, libfftw3-dev
Description: Library for computing Fast Fourier Transforms - Long precision
 The FFTW library computes Fast Fourier Transforms (FFT) in one or more
 dimensions. It is extremely fast. This package contains the shared library
 for long double precision transforms.
 .
 To get the static library and the header files, you need to install
 libfftw3-dev. For documentation, see libfftw3-doc.
Homepage: https://fftw.org

Package: libfftw3-quad3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2184
Maintainer: Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: fftw3 (3.3.10-2)
Version: 3.3.10-2+b1
Depends: libc6 (>= 2.34), libgomp1 (>= 4.9), libquadmath0 (>= 4.6)
Suggests: libfftw3-bin, libfftw3-dev
Description: Library for computing Fast Fourier Transforms - Quad precision
 The FFTW library computes Fast Fourier Transforms (FFT) in one or more
 dimensions. It is extremely fast. This package contains the shared library
 for quad precision transforms.
 .
 To get the static library and the header files, you need to install
 libfftw3-dev. For documentation, see libfftw3-doc.
Homepage: https://fftw.org

Package: libfftw3-single3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2388
Maintainer: Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: fftw3 (3.3.10-2)
Version: 3.3.10-2+b1
Depends: libc6 (>= 2.34), libgomp1 (>= 4.9)
Suggests: libfftw3-bin, libfftw3-dev
Description: Library for computing Fast Fourier Transforms - Single precision
 The FFTW library computes Fast Fourier Transforms (FFT) in one or more
 dimensions. It is extremely fast. This package contains the shared library
 for single precision transforms.
 .
 To get the static library and the header files, you need to install
 libfftw3-dev. For documentation, see libfftw3-doc.
Homepage: https://fftw.org

Package: libfido2-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 250
Maintainer: Debian Authentication Maintainers <pkg-auth-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libfido2 (1.15.0-1)
Version: 1.15.0-1+b1
Depends: libc6 (>= 2.38), libcbor0.10 (>= 0.10.2), libssl3t64 (>= 3.0.0), libudev1 (>= 183), zlib1g (>= 1:1.1.4)
Description: library for generating and verifying FIDO 2.0 objects
 A library for communicating with a FIDO device over USB or NFC, and for
 verifying attestation and assertion signatures. FIDO U2F (CTAP 1) and FIDO
 2.0 (CTAP 2) are supported.
 .
 This package contains the library.
Homepage: https://developers.yubico.com/libfido2/

Package: libfile-basedir-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 39
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.09-2
Depends: perl:any, libipc-system-simple-perl
Description: Perl module to use the freedesktop basedir specification
 The File::BaseDir module can be used to find directories and files as
 specified by the XDG Base Directory Specification. It takes care of
 defaults and uses File::Spec to make the output platform specific.
 .
 For this module the XDG basedir specification 0.6 was used.
Homepage: https://metacpan.org/release/File-BaseDir

Package: libfile-desktopentry-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 46
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.22-3
Depends: perl:any, libfile-basedir-perl, liburi-perl
Recommends: x-terminal-emulator
Description: Perl module to handle freedesktop .desktop files
 File::DesktopEntry is used to work with .desktop files. The
 format of these files is specified by the freedesktop "Desktop
 Entry" specification. For this module version 1.0 of the
 specification was used:
 .
 <http://standards.freedesktop.org/desktop-entry-spec/desktop-entry-spec-1.0.html>
Homepage: https://metacpan.org/release/File-DesktopEntry

Package: libfile-fcntllock-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 130
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: libfile-fcntllock-perl (0.22-4)
Version: 0.22-4+b4
Depends: perl (>= 5.40.0-6), perlapi-5.40.0, libc6 (>= 2.28)
Suggests: gcc | c-compiler
Description: Perl module for file locking with fcntl(2)
 File::FcntlLock is a Perl module to do file locking in an object oriented
 fashion using the fcntl(2) system call. This allows locks on parts of a file
 as well as on the whole file and overcomes some known problems with flock(2),
 on which Perl's flock() function is based.
 .
 Furthermore due to its design it supports reliable locking over NFS.
Homepage: https://metacpan.org/release/File-FcntlLock

Package: libfile-listing-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 33
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 6.16-1
Depends: perl:any, libhttp-date-perl
Description: module to parse directory listings
 File::Listing exports a single function called parse_dir(), which can be used
 to parse directory listings.
 .
 The first parameter to parse_dir() is the directory listing to parse. It can
 be a scalar, a reference to an array of directory lines or a glob
 representing a filehandle to read the directory listing from.
 .
 The second parameter is the time zone to use when parsing time stamps in the
 listing. If this value is undefined, then the local time zone is assumed.
 .
 The third parameter is the type of listing to assume. Currently supported
 formats are 'unix', 'apache' and 'dosftp'. The default value 'unix'.
Homepage: https://metacpan.org/release/File-Listing

Package: libfile-mimeinfo-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 113
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.35-1
Depends: perl:any, libencode-locale-perl, libfile-basedir-perl, libfile-desktopentry-perl, shared-mime-info
Recommends: libio-stringy-perl
Description: Perl module to determine file types
 File::MimeInfo can be used to determine the mime type of a file. It tries to
 implement the freedesktop specification for a shared MIME database.
 .
 This package also contains two related utilities:
  * mimetype: determine a file's mimetype
  * mimeopen: open files according to their mimetype
Homepage: https://metacpan.org/release/File-MimeInfo

Package: libflac12
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 458
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: flac
Version: 1.4.2+ds-2
Depends: libc6 (>= 2.33), libogg0 (>= 1.0rc3)
Description: Free Lossless Audio Codec - runtime C library
 FLAC stands for Free Lossless Audio Codec. Grossly oversimplified, FLAC is
 similar to MP3, but lossless.  The FLAC project consists of:
 .
  * The stream format
  * libFLAC, which implements a reference encoder, stream decoder, and file
    decoder
  * flac, which is a command-line wrapper around libFLAC to encode and decode
    .flac files
  * Input plugins for various music players (Winamp, XMMS, and more in the
    works)
 .
 This package contains the runtime library libFLAC.
Homepage: https://xiph.org/flac/

Package: libflac14
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 479
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: flac
Version: 1.5.0+ds-2
Depends: libc6 (>= 2.34), libogg0 (>= 1.1.0)
Description: Free Lossless Audio Codec - runtime C library
 FLAC stands for Free Lossless Audio Codec. Grossly oversimplified, FLAC is
 similar to MP3, but lossless.  The FLAC project consists of:
 .
  * The stream format
  * libFLAC, which implements a reference encoder, stream decoder, and file
    decoder
  * flac, which is a command-line wrapper around libFLAC to encode and decode
    .flac files
  * Input plugins for various music players (Winamp, XMMS, and more in the
    works)
 .
 This package contains the runtime library libFLAC.
Homepage: https://xiph.org/flac/

Package: libflite1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 27558
Maintainer: Debian Accessibility Team <pkg-a11y-devel@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: same
Source: flite
Version: 2.2-7
Depends: libasound2t64 (>= 1.0.16), libc6 (>= 2.38)
Description: Small run-time speech synthesis engine - shared libraries
 Flite is a small fast run-time speech synthesis engine.  It is the
 latest addition to the suite of free software synthesis tools
 including University of Edinburgh's Festival Speech Synthesis System
 and Carnegie Mellon University's FestVox project, tools, scripts and
 documentation for building synthetic voices.  However, flite itself
 does not require either of these systems to run.
 .
 It currently only supports the English and Indic languages.
 .
 This package contains the shared library objects of Festival Lite
Homepage: http://cmuflite.org

Package: libfont-afm-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 69
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.20-4
Depends: perl:any
Description: Perl interface to Adobe Font Metrics files
 This module implements the Font::AFM class. Objects of this class are
 initialised from an AFM-file and allow you to obtain information
 about the font and the metrics of the various glyphs in the font.
 .
 All measurements in AFM files are given in terms of units equal to
 1/1000 of the scale factor of the font being used. To compute actual
 sizes in a document, these amounts should be multiplied by (scale
 factor of font)/1000.
Homepage: https://metacpan.org/release/Font-AFM

Package: libfontconfig1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 592
Maintainer: Debian freedesktop.org maintainers <pkg-freedesktop-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: fontconfig
Version: 2.15.0-2.3
Provides: libfontconfig
Depends: libc6 (>= 2.38), libexpat1 (>= 2.0.1), libfreetype6 (>= 2.9.1), fontconfig-config (>= 2.15.0-2.3)
Breaks: xpdf (<= 3.03-11)
Description: generic font configuration library - runtime
 Fontconfig is a font configuration and customization library, which
 does not depend on the X Window System. It is designed to locate
 fonts within the system and select them according to requirements
 specified by applications.
 .
 This package contains the runtime library needed to launch applications
 using fontconfig.
Homepage: https://www.freedesktop.org/wiki/Software/fontconfig/

Package: libfontenc1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 59
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libfontenc (1:1.1.8-1)
Version: 1:1.1.8-1+b2
Depends: libc6 (>= 2.38), zlib1g (>= 1:1.1.4)
Description: X11 font encoding library
 libfontenc is a library which helps font libraries portably determine
 and deal with different encodings of fonts.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libfontenc

Package: libfreetype-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2156
Maintainer: Hugh McMaster <hmc@debian.org>
Architecture: amd64
Multi-Arch: same
Source: freetype
Version: 2.13.3+dfsg-1+deb13u1
Replaces: libfreetype6-dev (<< 2.10.1)
Provides: libfreetype6-dev (= 2.13.3+dfsg-1+deb13u1)
Depends: libfreetype6 (= 2.13.3+dfsg-1+deb13u1), libbrotli-dev, libbz2-dev, libc6-dev | libc-dev, libpng-dev, zlib1g-dev | libz-dev
Suggests: freetype2-doc (= 2.13.3+dfsg-1+deb13u1)
Breaks: libfreetype6-dev (<< 2.10.1)
Description: FreeType 2 font engine, development files
 The FreeType project is a team of volunteers who develop free,
 portable and high-quality software solutions for digital typography.
 They specifically target embedded systems and focus on providing small,
 efficient and ubiquitous products.
 .
 This package contains all of the supplementary files you need to develop your
 own programs using the FreeType 2 library.
Homepage: https://freetype.org

Package: libfreetype6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 963
Maintainer: Hugh McMaster <hmc@debian.org>
Architecture: amd64
Multi-Arch: same
Source: freetype
Version: 2.13.3+dfsg-1+deb13u1
Depends: libbrotli1 (>= 0.6.0), libbz2-1.0, libc6 (>= 2.33), libpng16-16t64 (>= 1.6.46), zlib1g (>= 1:1.1.4)
Description: FreeType 2 font engine, shared library files
 The FreeType project is a team of volunteers who develop free,
 portable and high-quality software solutions for digital typography.
 They specifically target embedded systems and focus on providing small,
 efficient and ubiquitous products.
 .
 The FreeType 2 library is their new software font engine.  It has been
 designed to provide the following important features:
  * A universal and simple API to manage font files
  * Support for several font formats through loadable modules
  * High-quality anti-aliasing
  * High portability & performance
 .
 Supported font formats include:
  * TrueType files (.ttf) and collections (.ttc)
  * Type 1 font files both in ASCII (.pfa) or binary (.pfb) format
  * Type 1 Multiple Master fonts.  The FreeType 2 API also provides
    routines to manage design instances easily
  * Type 1 CID-keyed fonts
  * OpenType/CFF (.otf) fonts
  * CFF/Type 2 fonts
  * Adobe CEF fonts (.cef), used to embed fonts in SVG documents with
    the Adobe SVG viewer plugin.
  * Windows FNT/FON bitmap fonts
 .
 This package contains the files needed to run programs that use the
 FreeType 2 library.
Homepage: https://freetype.org

Package: libfribidi0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 146
Maintainer: Debian Hebrew Packaging Team <team+hebrew@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: fribidi
Version: 1.0.16-1
Depends: libc6 (>= 2.4)
Description: Free Implementation of the Unicode BiDi algorithm
 FriBiDi is a BiDi algorithm implementation for Hebrew and/or Arabic
 languages.
 This package contains the shared libraries.
Homepage: http://www.fribidi.org/

Package: libfstrm0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 71
Maintainer: Robert Edmonds <edmonds@debian.org>
Architecture: amd64
Multi-Arch: same
Source: fstrm (0.6.1-1)
Version: 0.6.1-1+b3
Depends: libc6 (>= 2.38)
Description: Frame Streams (fstrm) library
 Frame Streams is a light weight, binary clean protocol that allows for the
 transport of arbitrarily encoded data payload sequences with minimal framing
 overhead -- just four bytes per data frame. Frame Streams does not specify an
 encoding format for data frames and can be used with any data serialization
 format that produces byte sequences, such as Protocol Buffers, XML, JSON,
 MessagePack, YAML, etc. Frame Streams can be used as both a streaming
 transport over a reliable byte stream socket (TCP sockets, TLS connections,
 AF_UNIX sockets, etc.) for data in motion as well as a file format for data
 at rest. A "Content Type" header identifies the type of payload being carried
 over an individual Frame Stream and allows cooperating programs to determine
 how to interpret a given sequence of data payloads.
 .
 This is the "fstrm" implementation of Frame Streams in C.
 .
 This package contains the shared library.
Homepage: https://github.com/farsightsec/fstrm

Package: libfuse2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 345
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: fuse (2.9.9-6)
Version: 2.9.9-6+b1
Depends: libc6 (>= 2.34)
Suggests: fuse
Conflicts: fuse (<< 2.9.9-6+b1)
Description: Filesystem in Userspace (library)
 Filesystem in Userspace (FUSE) is a simple interface for userspace programs to
 export a virtual filesystem to the Linux kernel. It also aims to provide a
 secure method for non privileged users to create and mount their own filesystem
 implementations.
 .
 This package contains the shared library.
Homepage: https://github.com/libfuse/libfuse/wiki

Package: libfuse3-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 305
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: fuse3
Version: 3.14.0-4
Depends: libc6 (>= 2.34)
Suggests: fuse3
Description: Filesystem in Userspace (library) (3.x version)
 Filesystem in Userspace (FUSE) is a simple interface for userspace programs to
 export a virtual filesystem to the Linux kernel. It also aims to provide a
 secure method for non privileged users to create and mount their own filesystem
 implementations.
 .
 This package contains the shared library.
Homepage: https://github.com/libfuse/libfuse/wiki

Package: libfuse3-4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 325
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: fuse3
Version: 3.17.2-3
Depends: libc6 (>= 2.38)
Suggests: fuse3
Description: Filesystem in Userspace (library) (3.x version)
 Filesystem in Userspace (FUSE) is a simple interface for userspace programs to
 export a virtual filesystem to the Linux kernel. It also aims to provide a
 secure method for non privileged users to create and mount their own filesystem
 implementations.
 .
 This package contains the shared library.
Homepage: https://github.com/libfuse/libfuse/wiki

Package: libgav1-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1154
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libgav1 (0.19.0-3)
Version: 0.19.0-3+b1
Depends: libabsl20240722 (>= 20240722.0-1), libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 12)
Description: AV1 decoder developed by Google -- runtime library
 This package contains the runtime, shared library of gav1. Gav1 is
 a new decoder implementation for AV1 video encoding format (supporting
 profiles 0 and 1).
Homepage: https://chromium.googlesource.com/codecs/libgav1/

Package: libgbm1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 128
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: mesa
Version: 25.0.7-2+deb13u1
Depends: libc6 (>= 2.38), libdrm2 (>= 2.4.121), libexpat1 (>= 2.0.1), libwayland-server0 (>= 1.15.0), mesa-libgallium (= 25.0.7-2+deb13u1)
Description: generic buffer management API -- runtime
 This package contains the GBM buffer management library.  It provides a
 mechanism for allocating buffers for graphics rendering tied to Mesa.
 .
 GBM is intended to be used as a native platform for EGL on drm or openwfd.
Homepage: https://mesa3d.org/

Package: libgcc-12-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 14282
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.4.0-5
Replaces: libtsan2 (<< 12-20211113-2~)
Depends: gcc-12-base (= 12.4.0-5), libgcc-s1 (>= 12.4.0-5), libgomp1 (>= 12.4.0-5), libitm1 (>= 12.4.0-5), libatomic1 (>= 12.4.0-5), libasan8 (>= 12.4.0-5), liblsan0 (>= 12.4.0-5), libtsan2 (>= 12.4.0-5), libubsan1 (>= 12.4.0-5), libquadmath0 (>= 12.4.0-5)
Recommends: libc6-dev (>= 2.23-1~)
Breaks: libtsan2 (<< 12-20211113-2~)
Description: GCC support library (development files)
 This package contains the headers and static library files necessary for
 building C programs which use libgcc, libgomp, libquadmath, libssp or libitm.
Homepage: http://gcc.gnu.org/

Package: libgcc-14-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 17357
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-14
Version: 14.2.0-19
Replaces: libtsan2 (<< 12-20211113-2~)
Depends: gcc-14-base (= 14.2.0-19), libgcc-s1 (>= 14.2.0-19), libgomp1 (>= 14.2.0-19), libitm1 (>= 14.2.0-19), libatomic1 (>= 14.2.0-19), libasan8 (>= 14.2.0-19), liblsan0 (>= 14.2.0-19), libtsan2 (>= 14.2.0-19), libubsan1 (>= 14.2.0-19), libhwasan0 (>= 14.2.0-19), libquadmath0 (>= 14.2.0-19)
Recommends: libc6-dev (>= 2.23-1~)
Breaks: libtsan2 (<< 12-20211113-2~)
Description: GCC support library (development files)
 This package contains the headers and static library files necessary for
 building C programs which use libgcc, libgomp, libquadmath, libssp or libitm.
Homepage: http://gcc.gnu.org/

Package: libgcc-s1
Protected: yes
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 197
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-14
Version: 14.2.0-19
Replaces: libgcc1 (<< 1:10)
Provides: libgcc1 (= 1:14.2.0-19)
Depends: gcc-14-base (= 14.2.0-19), libc6 (>= 2.35)
Description: GCC support library
 Shared version of the support library, a library of internal subroutines
 that GCC uses to overcome shortcomings of particular machines, or
 special needs for some languages.
Homepage: http://gcc.gnu.org/
Important: yes

Package: libgcrypt20
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1999
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Version: 1.11.0-7+deb13u1
Depends: libc6 (>= 2.38), libgpg-error0 (>= 1.50)
Suggests: rng-tools
Description: LGPL Crypto library - runtime library
 libgcrypt contains cryptographic functions.  Many important free
 ciphers, hash algorithms and public key signing algorithms have been
 implemented:
 .
 Arcfour, Blowfish, CAST5, DES, AES, Twofish, Serpent, rfc2268 (rc2), SEED,
 Poly1305, Camellia, ChaCha20, IDEA, Salsa, SM4, Blake-2, CRC, MD2, MD4, MD5,
 RIPE-MD160, SM3, SHA-1, SHA-256, SHA-512, SHA3-224, SHA3-256, SHA3-384,
 SHA3-512, SHAKE128, SHAKE256, Tiger, Whirlpool, DSA, DSA2, ElGamal, RSA, ECC
 (Curve25519, sec256k1, GOST R 34.10-2001 and GOST R 34.10-2012, etc.)
Homepage: https://gnupg.org/software/libgcrypt/

Package: libgd3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 457
Maintainer: GD Team <team+gd@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libgd2
Version: 2.3.3-14~deb13u1
Depends: libavif16 (>= 1.2.1), libc6 (>= 2.38), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.2.1), libheif1 (>= 1.3.2), libimagequant0 (>= 2.11.10), libjpeg62-turbo (>= 1.3.1), libpng16-16t64 (>= 1.6.46), libtiff6 (>= 4.0.3), libwebp7 (>= 1.5.0), libxpm4
Suggests: libgd-tools
Description: GD Graphics Library
 GD is a graphics library. It allows your code to quickly draw images
 complete with lines, arcs, text, multiple colours, cut and paste from
 other images, flood fills, and write out the result as a PNG file.
 This is particularly useful in World Wide Web applications, where PNG is
 one of the formats accepted for inline images by most browsers.
 .
 This is the runtime package of the library.
Homepage: https://libgd.github.io/

Package: libgdbm-compat4t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 75
Maintainer: Nicolas Mora <babelouest@debian.org>
Architecture: amd64
Multi-Arch: same
Source: gdbm
Version: 1.24-2
Replaces: libgdbm-compat4
Provides: libgdbm-compat4 (= 1.24-2)
Depends: libc6 (>= 2.33), libgdbm6t64 (>= 1.16)
Breaks: libgdbm-compat4 (<< 1.24-2)
Description: GNU dbm database routines (legacy support runtime version) 
 GNU dbm ('gdbm') is a library of database functions that use extendible
 hashing and works similarly to the standard UNIX 'dbm' functions.
 .
 The basic use of 'gdbm' is to store key/data pairs in a data file, thus
 providing a persistent version of the 'dictionary' Abstract Data Type
 ('hash' to perl programmers).
 This package includes library files, required to run old programs,
 that use legacy 'dbm' interface. For new programs, please use modern
 interface, provided by libgdbm6t64 and libgdbm-dev.
Homepage: https://gnu.org/software/gdbm

Package: libgdbm6t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 138
Maintainer: Nicolas Mora <babelouest@debian.org>
Architecture: amd64
Multi-Arch: same
Source: gdbm
Version: 1.24-2
Replaces: libgdbm6
Provides: libgdbm6 (= 1.24-2)
Depends: libc6 (>= 2.34)
Suggests: gdbm-l10n (= 1.24-2)
Breaks: libgdbm6 (<< 1.24-2)
Description: GNU dbm database routines (runtime version) 
 GNU dbm ('gdbm') is a library of database functions that use extendible
 hashing and works similarly to the standard UNIX 'dbm' functions.
 .
 The basic use of 'gdbm' is to store key/data pairs in a data file, thus
 providing a persistent version of the 'dictionary' Abstract Data Type
 ('hash' to perl programmers).
Homepage: https://gnu.org/software/gdbm

Package: libgdk-pixbuf-2.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 486
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gdk-pixbuf
Version: 2.42.12+dfsg-4+deb13u1
Depends: libgdk-pixbuf2.0-common (>= 2.42.12+dfsg-4+deb13u1), shared-mime-info, libc6 (>= 2.34), libglib2.0-0t64 (>= 2.80.0), libjpeg62-turbo (>= 1.3.1), libpng16-16t64 (>= 1.6.46), libtiff6 (>= 4.0.3)
Recommends: libgdk-pixbuf2.0-bin
Description: GDK Pixbuf library
 The GDK Pixbuf library provides:
  - Image loading and saving facilities.
  - Fast scaling and compositing of pixbufs.
  - Simple animation loading (ie. animated GIFs)
Homepage: https://www.gtk.org/

Package: libgdk-pixbuf2.0-bin
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 76
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gdk-pixbuf
Version: 2.42.12+dfsg-4+deb13u1
Depends: libc6 (>= 2.34), libgdk-pixbuf-2.0-0 (>= 2.35.4), libglib2.0-0t64 (>= 2.16.0)
Description: GDK Pixbuf library (thumbnailer)
 The GDK Pixbuf library provides:
  - Image loading and saving facilities.
  - Fast scaling and compositing of pixbufs.
  - Simple animation loading (ie. animated GIFs)
 .
 This package contains the GDK pixdata compression utility, the thumbnailer
 and a utility for converting images into C code.
Homepage: https://www.gtk.org/

Package: libgdk-pixbuf2.0-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2552
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: gdk-pixbuf
Version: 2.42.12+dfsg-4+deb13u1
Description: GDK Pixbuf library - data files
 This package contains the common files and translations for the GDK
 Pixbuf library.
Homepage: https://www.gtk.org/

Package: libgfortran5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3152
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-14
Version: 14.2.0-19
Depends: gcc-14-base (= 14.2.0-19), libc6 (>= 2.38), libgcc-s1 (>= 4.3)
Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Description: Runtime library for GNU Fortran applications
 Library needed for GNU Fortran applications linked against the
 shared library.
Homepage: http://gcc.gnu.org/

Package: libgirepository-1.0-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 322
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gobject-introspection
Version: 1.84.0-1
Provides: libgirepository-1.0-1-with-libffi8 (= 1.84.0-1)
Depends: libc6 (>= 2.29), libffi8 (>= 3.4), libglib2.0-0t64 (>= 2.82.0)
Breaks: libcjs0 (<< 4.8.2-1+b1), libgjs0g (<< 1.68.4-1+b1), libglib-object-introspection-perl (<< 0.051-2~), python-gi (<< 3.42.0-1+b1), python3-gi (<< 3.42.0-1+b1), ruby-gobject-introspection (<< 3.4.3-1+b2)
Description: Library for handling GObject introspection data (runtime library)
 GObject Introspection is a project for providing machine readable
 introspection data of the API of C libraries. This introspection
 data can be used in several different use cases, for example
 automatic code generation for bindings, API verification and documentation
 generation.
 .
 GObject Introspection contains tools to generate and handle the
 introspection data.
 .
 This package contains a C library for handling the introspection data.
Homepage: https://wiki.gnome.org/GObjectIntrospection

Package: libgl1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 653
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libglvnd (1.7.0-1)
Version: 1.7.0-1+b2
Depends: libc6 (>= 2.34), libglvnd0 (= 1.7.0-1+b2), libglx0 (= 1.7.0-1+b2)
Description: Vendor neutral GL dispatch library -- legacy GL support
 This is an implementation of the vendor-neutral dispatch layer for
 arbitrating OpenGL API calls between multiple vendors on a per-screen basis.
 .
 This package contains support for old libGL for compatibility reasons.
Homepage: https://gitlab.freedesktop.org/glvnd/libglvnd

Package: libgl1-mesa-dri
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 241
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: mesa
Version: 25.0.7-2+deb13u1
Depends: libgbm1 (= 25.0.7-2+deb13u1), libvulkan1, libc6 (>= 2.34)
Description: free implementation of the OpenGL API -- DRI modules
 This version of Mesa provides GLX and DRI capabilities: it is capable of
 both direct and indirect rendering.  For direct rendering, it can use DRI
 modules from the libgl1-mesa-dri package to accelerate drawing.
 .
 This package does not include the OpenGL library itself, only the DRI
 modules for accelerating direct rendering.
 .
 For a complete description of Mesa, please look at the
 libglx-mesa0 package.
Homepage: https://mesa3d.org/

Package: libglapi-mesa
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 268
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: mesa
Version: 22.3.6-1+deb12u2
Depends: libc6 (>= 2.34)
Description: free implementation of the GL API -- shared library
 The Mesa GL API module is responsible for dispatching all the gl*
 functions. It is intended to be mainly used by both the libgles1-mesa
 and libgles2-mesa packages.
Homepage: https://mesa3d.org/

Package: libgles2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 106
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libglvnd (1.7.0-1)
Version: 1.7.0-1+b2
Depends: libc6 (>= 2.34), libglvnd0 (= 1.7.0-1+b2)
Description: Vendor neutral GL dispatch library -- GLESv2 support
 This is an implementation of the vendor-neutral dispatch layer for
 arbitrating OpenGL API calls between multiple vendors on a per-screen basis.
 .
 This package contains support for GLESv2.
Homepage: https://gitlab.freedesktop.org/glvnd/libglvnd

Package: libglib2.0-0
Status: deinstall ok config-files
Priority: optional
Section: libs
Installed-Size: 4135
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: glib2.0
Version: 2.74.6-2+deb12u9
Config-Version: 2.74.6-2+deb12u9
Depends: libc6 (>= 2.34), libffi8 (>= 3.4), libmount1 (>= 2.35.2-7~), libpcre2-8-0 (>= 10.22), libselinux1 (>= 3.1~), zlib1g (>= 1:1.2.2)
Recommends: libglib2.0-data, shared-mime-info, xdg-user-dirs
Suggests: low-memory-monitor
Breaks: gimp (<< 2.10.14-3~), glib-networking-tests (<< 2.70.0~), gnome-keyring (<< 40.0-3~), libedataserver-1.2-26 (<< 3.44.3-2~), libgirepository-1.0-1 (<< 1.62.0-4~), libgladeui-2-6 (<< 3.22.2), libsoup2.4-tests (<< 2.72.0-3~)
Description: GLib library of C routines
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK+, GIMP, and GNOME.
 .
 This package contains the shared libraries.
Homepage: https://wiki.gnome.org/Projects/GLib

Package: libglib2.0-0t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 4449
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: glib2.0
Version: 2.84.4-3~deb13u5
Replaces: libglib2.0-0 (<< 2.80.0-7~)
Provides: libgio-2.0-0 (= 2.84.4-3~deb13u5), libglib-2.0-0 (= 2.84.4-3~deb13u5), libglib2.0-0 (= 2.84.4-3~deb13u5), libgmodule-2.0-0 (= 2.84.4-3~deb13u5), libgobject-2.0-0 (= 2.84.4-3~deb13u5), libgthread-2.0-0 (= 2.84.4-3~deb13u5)
Depends: libatomic1 (>= 4.8), libc6 (>= 2.38), libffi8 (>= 3.4), libmount1 (>= 2.40~rc2), libpcre2-8-0 (>= 10.22), libselinux1 (>= 3.1~), zlib1g (>= 1:1.2.2)
Recommends: libglib2.0-data, shared-mime-info, xdg-user-dirs
Suggests: low-memory-monitor
Breaks: glib-networking-tests (<< 2.70.0~), gnome-keyring (<< 40.0-3~), gnome-shell (<< 44.9-2~), libedataserver-1.2-26 (<< 3.44.3-2~), libgladeui-2-6 (<< 3.22.2), libglib2.0-0 (<< 2.80.0-7~), libsoup2.4-tests (<< 2.72.0-3~)
Description: GLib library of C routines
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK+, GIMP, and GNOME.
 .
 This package contains the shared libraries.
Homepage: https://gitlab.gnome.org/GNOME/glib

Package: libglib2.0-data
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 9832
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: glib2.0
Version: 2.84.4-3~deb13u5
Description: Common files for GLib library
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK+, GIMP, and GNOME.
 .
 This package is needed for the runtime libraries to display messages in
 languages other than English.
Homepage: https://gitlab.gnome.org/GNOME/glib

Package: libglvnd0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 733
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libglvnd (1.7.0-1)
Version: 1.7.0-1+b2
Replaces: libgldispatch0-nvidia
Depends: libc6 (>= 2.38)
Breaks: libgldispatch0-nvidia
Description: Vendor neutral GL dispatch library
 This is an implementation of the vendor-neutral dispatch layer for
 arbitrating OpenGL API calls between multiple vendors on a per-screen basis.
 .
 This package contains the GL dispatch library.
Homepage: https://gitlab.freedesktop.org/glvnd/libglvnd

Package: libglx-mesa0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 516
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: mesa
Version: 25.0.7-2+deb13u1
Provides: libglx-vendor
Depends: libc6 (>= 2.38), libdrm2 (>= 2.4.121), libexpat1 (>= 2.0.1), libx11-6 (>= 2:1.4.99.1), libx11-xcb1, libxcb-dri3-0, libxcb-glx0 (>= 1.8), libxcb-present0, libxcb-shm0, libxcb-xfixes0, libxcb1, libxext6, libxxf86vm1, mesa-libgallium (= 25.0.7-2+deb13u1), libgl1-mesa-dri
Breaks: glx-diversions (<< 0.8.4~), libopengl-perl (<< 0.6704+dfsg-2)
Description: free implementation of the OpenGL API -- GLX vendor library
 Mesa is a 3-D graphics library with an API which is very similar to
 that of OpenGL.  To the extent that Mesa utilizes the OpenGL command
 syntax or state machine, it is being used with authorization from
 Silicon Graphics, Inc.  However, the authors make no claim that Mesa
 is in any way a compatible replacement for OpenGL or associated with
 Silicon Graphics, Inc.
 .
 This version of Mesa provides GLX and DRI capabilities: it is capable of
 both direct and indirect rendering.  For direct rendering, it can use DRI
 modules from the libgl1-mesa-dri package to accelerate drawing.
 .
 This package does not include the modules themselves: these can be found
 in the libgl1-mesa-dri package.
Homepage: https://mesa3d.org/

Package: libglx0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 163
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libglvnd (1.7.0-1)
Version: 1.7.0-1+b2
Depends: libc6 (>= 2.38), libglvnd0 (= 1.7.0-1+b2), libx11-6 (>= 2:1.4.99.1), libglx-mesa0
Description: Vendor neutral GL dispatch library -- GLX support
 This is an implementation of the vendor-neutral dispatch layer for
 arbitrating OpenGL API calls between multiple vendors on a per-screen basis.
 .
 This package contains support for GLX.
Homepage: https://gitlab.freedesktop.org/glvnd/libglvnd

Package: libgme0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 343
Maintainer: Ileana Dumitrescu <ileanadumitrescu95@gmail.com>
Architecture: amd64
Multi-Arch: same
Source: game-music-emu (0.6.3-7)
Version: 0.6.3-7+b2
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.0), libstdc++6 (>= 11), zlib1g (>= 1:1.1.4)
Description: Playback library for video game music files - shared library
 game-music-emu is a collection of video game music file emulators that
 support the following formats and systems:
  * AY        ZX Spectrum/Amstrad CPC
  * GBS       Nintendo Game Boy
  * GYM       Sega Genesis/Mega Drive
  * HES       NEC TurboGrafx-16/PC Engine
  * KSS       MSX Home Computer/other Z80 systems (doesn't support FM sound)
  * NSF/NSFE  Nintendo NES/Famicom (with VRC 6, Namco 106, and FME-7 sound)
  * SAP       Atari systems using POKEY sound chip
  * SPC       Super Nintendo/Super Famicom
  * VGM/VGZ   Sega Master System/Mark III, Sega Genesis/Mega Drive, BBC Micro
 .
 This package contains the shared libraries necessary to run programs
 using libgme.
Homepage: https://github.com/libgme/game-music-emu

Package: libgmp10
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 882
Maintainer: Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gmp
Version: 2:6.3.0+dfsg-3
Depends: libc6 (>= 2.38)
Breaks: postgresql-pgmp (<< 1.0.3-1)
Description: Multiprecision arithmetic library
 GNU MP is a programmer's library for arbitrary precision
 arithmetic (ie, a bignum package).  It can operate on signed
 integer, rational, and floating point numeric types.
 .
 It has a rich set of functions, and the functions have a regular
 interface.
Homepage: https://gmplib.org/

Package: libgnutls-dane0t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 546
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gnutls28
Version: 3.8.9-3+deb13u4
Replaces: libgnutls-dane0
Provides: libgnutls-dane0 (= 3.8.9-3+deb13u4)
Depends: libgnutls30t64 (= 3.8.9-3+deb13u4), libc6 (>= 2.34), libunbound8 (>= 1.8.0)
Suggests: dns-root-data
Breaks: libgnutls-dane0 (<< 3.8.9-3+deb13u4)
Description: GNU TLS library - DANE security support
 GnuTLS is a portable library which implements the Transport Layer
 Security (TLS 1.0, 1.1, 1.2, 1.3) and Datagram
 Transport Layer Security (DTLS 1.0, 1.2) protocols.
 .
 GnuTLS features support for:
  - certificate path validation, as well as DANE and trust on first use.
  - the Online Certificate Status Protocol (OCSP).
  - public key methods, including RSA and Elliptic curves, as well as password
    and key authentication methods such as SRP and PSK protocols.
  - all the strong encryption algorithms, including AES and Camellia.
  - CPU-assisted cryptography with VIA padlock and AES-NI instruction sets.
  - HSMs and cryptographic tokens, via PKCS #11.
 .
 This package contains the runtime library for DANE (DNS-based Authentication
 of Named Entities) support.
Homepage: https://www.gnutls.org/

Package: libgnutls30t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3504
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gnutls28
Version: 3.8.9-3+deb13u4
Replaces: libgnutls30
Provides: libgnutls30 (= 3.8.9-3+deb13u4)
Depends: libc6 (>= 2.38), libgmp10 (>= 2:6.3.0+dfsg), libhogweed6t64 (>= 3.10), libidn2-0 (>= 2.0.0), libnettle8t64 (>= 3.10), libp11-kit0 (>= 0.25.1), libtasn1-6 (>= 4.14), libunistring5 (>= 1.1)
Suggests: gnutls-bin
Breaks: libgnutls30 (<< 3.8.9-3+deb13u4)
Description: GNU TLS library - main runtime library
 GnuTLS is a portable library which implements the Transport Layer
 Security (TLS 1.0, 1.1, 1.2, 1.3) and Datagram
 Transport Layer Security (DTLS 1.0, 1.2) protocols.
 .
 GnuTLS features support for:
  - certificate path validation, as well as DANE and trust on first use.
  - the Online Certificate Status Protocol (OCSP).
  - public key methods, including RSA and Elliptic curves, as well as password
    and key authentication methods such as SRP and PSK protocols.
  - all the strong encryption algorithms, including AES and Camellia.
  - CPU-assisted cryptography with VIA padlock and AES-NI instruction sets.
  - HSMs and cryptographic tokens, via PKCS #11.
 .
 This package contains the main runtime library.
Homepage: https://www.gnutls.org/

Package: libgomp1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 368
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-14
Version: 14.2.0-19
Depends: gcc-14-base (= 14.2.0-19), libc6 (>= 2.38)
Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Description: GCC OpenMP (GOMP) support library
 GOMP is an implementation of OpenMP for the C, C++, and Fortran compilers
 in the GNU Compiler Collection.
Homepage: http://gcc.gnu.org/

Package: libgpg-error0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 208
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libgpg-error
Version: 1.51-4
Depends: libc6 (>= 2.38)
Recommends: libgpg-error-l10n
Description: GnuPG development runtime library
 Library that defines common error values, messages, and common
 runtime functionality for all GnuPG components.  Among these are GPG,
 GPGSM, GPGME, GPG-Agent, libgcrypt, pinentry, SmartCard Daemon and
 possibly more in the future.
 .
 It will likely be renamed "gpgrt" in the future.
Homepage: https://www.gnupg.org/related_software/libgpg-error/

Package: libgpm2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 45
Maintainer: Axel Beckert <abe@debian.org>
Architecture: amd64
Multi-Arch: same
Source: gpm (1.20.7-11)
Version: 1.20.7-11+b2
Depends: libc6 (>= 2.38)
Suggests: gpm
Description: General Purpose Mouse - shared library
 This package provides a library that handles mouse requests
 and delivers them to applications. See the description for the 'gpm'
 package for more information.
Homepage: https://nico.schottelius.org/software/gpm/

Package: libgprofng0
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 4034
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: binutils
Version: 2.44-3
Depends: libbinutils (= 2.44-3), libc6 (>= 2.38), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 14), zlib1g (>= 1:1.1.4)
Description: GNU Next Generation profiler (runtime library)
 Gprofng is the GNU Next Generation profiler for analyzing the performance
 of Linux applications.  Gprofng allows you to:
 .
  - Profile C / C++ / Java / Scala applications without needing to recompile
  - Profile multi-threaded applications
  - Analyze and compare multiple experiments
  - Use time-based sampling and / or hardware event counters
 .
 This package includes the libgprofng shared library.
Homepage: https://www.gnu.org/software/binutils/

Package: libgraphite2-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 191
Maintainer: Debian LibreOffice Maintainers <debian-openoffice@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: graphite2
Version: 1.3.14-2+deb13u1
Replaces: libgraphite2-2.0.0
Provides: libgraphite2-2.0.0
Depends: libc6 (>= 2.14)
Breaks: libgraphite2-2.0.0 (<< 1.2.0)
Description: Font rendering engine for Complex Scripts -- library
 Graphite is a system that can be used to create and use "smart fonts" capable
 of displaying writing systems with various complex behaviors, such as:
 contextual shaping, ligatures, reordering, split glyphs, bidirectionality,
 stacking diacritics and complex positioning.
 .
 This library was designed and developed by the NRSI (Non-Roman Script
 Initiative) within SIL International (www.sil.org) to act as a complement to
 other smart font rendering technologies with limited practical local
 extensibility. Its purpose is to help meet the needs of a very large number
 of "minority language" communities for local extensibility of complex script
 behaviors.
 .
 The behavior of the rendering engine for a given writing system is specified
 through extra tables added to a TrueType font.  These tables are generated by
 compiling a GDL (Graphite Description Language) source file into a font using
 grcompiler.
 .
 This package contains the shared library.
Homepage: https://graphite.sil.org/

Package: libgs-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 316
Maintainer: Debian Printing Team <debian-printing@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: ghostscript
Version: 10.05.1~dfsg-1+deb13u3
Replaces: libgs9-common (<< 10)
Breaks: libgs9-common (<< 10)
Description: interpreter for the PostScript language and for PDF - ICC profiles
 GPL Ghostscript is used for PostScript/PDF preview and printing.
 Usually as a back-end to a program such as ghostview,
 it can display PostScript and PDF documents in an X11 environment.
 .
 This package provides common ICC profiles.
Homepage: https://www.ghostscript.com/

Package: libgs10
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 22216
Maintainer: Debian Printing Team <debian-printing@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ghostscript
Version: 10.05.1~dfsg-1+deb13u3
Depends: libgs10-common (= 10.05.1~dfsg-1+deb13u3), poppler-data, libc6 (>= 2.38), libcups2t64 (>= 2.3~b6), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.10.1), libidn12 (>= 1.13), libijs-0.35 (>= 0.35), libjbig2dec0 (>= 0.16+20190905), libjpeg62-turbo (>= 1.3.1), liblcms2-2 (>= 2.6), libopenjp2-7 (>= 2.0.0), libpaper2 (>= 2.2.5), libpng16-16t64 (>= 1.6.46), libtiff6 (>= 4.0.3), libx11-6, libxt6t64, zlib1g (>= 1:1.2.0)
Description: interpreter for the PostScript language and for PDF - Library
 GPL Ghostscript is used for PostScript/PDF preview and printing.
 Usually as a back-end to a program such as ghostview,
 it can display PostScript and PDF documents in an X11 environment.
 .
 This package provides the Ghostscript library
 which makes the facilities of GPL Ghostscript available
 to applications.
Homepage: https://www.ghostscript.com/

Package: libgs10-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2266
Maintainer: Debian Printing Team <debian-printing@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: ghostscript
Version: 10.05.1~dfsg-1+deb13u3
Replaces: libgs-common (<< 10.0.0~dfsg-5)
Depends: fonts-urw-base35 (>= 20200910), libgs-common
Recommends: fonts-droid-fallback
Breaks: libgs-common (<< 10.0.0~dfsg-5)
Description: interpreter for the PostScript language and for PDF - common files
 GPL Ghostscript is used for PostScript/PDF preview and printing.
 Usually as a back-end to a program such as ghostview,
 it can display PostScript and PDF documents in an X11 environment.
 .
 This package provides common architecture-independent files
 needed by the GPL Ghostscript library.
 .
 By default, GPL Ghostscript uses a font from the fonts-droid package
 to approximate glyphs in PDFs
 for which the requested CJK TrueType font is missing.
 If the fonts-droid package is not installed,
 these glyphs will be rendered as bullets.
Homepage: https://www.ghostscript.com/

Package: libgsm1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 90
Maintainer: Debian Mobcom Maintainers <Debian-mobcom-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libgsm (1.0.22-1)
Version: 1.0.22-1+b2
Depends: libc6 (>= 2.4)
Conflicts: libgsm-dev
Description: Shared libraries for GSM speech compressor
 This package contains runtime shared libraries for libgsm, an
 implementation of the European GSM 06.10 provisional standard for
 full-rate speech transcoding, prI-ETS 300 036, which uses RPE/LTP
 (residual pulse excitation/long term prediction) coding at 13 kbit/s.
 .
 GSM 06.10 compresses frames of 160 13-bit samples (8 kHz sampling
 rate, i.e. a frame rate of 50 Hz) into 260 bits; for compatibility
 with typical UNIX applications, this implementation turns frames of
 160 16-bit linear samples into 33-byte frames (1650 Bytes/s).
 The quality of the algorithm is good enough for reliable speaker
 recognition; even music often survives transcoding in recognizable
 form (given the bandwidth limitations of 8 kHz sampling rate).
 .
 The interfaces offered are a front end modelled after compress(1), and
 a library API.  Compression and decompression run faster than realtime
 on most SPARCstations.  The implementation has been verified against the
 ETSI standard test patterns.
Homepage: http://www.quut.com/gsm/

Package: libgssapi-krb5-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 434
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.21.3-5+deb13u1
Depends: libkrb5-3 (= 1.21.3-5+deb13u1), libc6 (>= 2.38), libcom-err2 (>= 1.43.9), libk5crypto3 (>= 1.20), libkrb5support0 (= 1.21.3-5+deb13u1)
Suggests: krb5-doc, krb5-user
Description: MIT Kerberos runtime libraries - krb5 GSS-API Mechanism
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library for the MIT Kerberos
 implementation of GSS-API used by applications and Kerberos clients.
Homepage: https://web.mit.edu/kerberos/

Package: libharfbuzz0b
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1346
Maintainer: أحمد المحمودي (Ahmed El-Mahmoudy) <aelmahmoudy@users.sourceforge.net>
Architecture: amd64
Multi-Arch: same
Source: harfbuzz
Version: 10.2.0-1+deb13u1
Replaces: libharfbuzz0, libharfbuzz0a
Depends: libc6 (>= 2.38), libfreetype6 (>= 2.11.1), libglib2.0-0t64 (>= 2.32.0), libgraphite2-3 (>= 1.2.2)
Conflicts: libharfbuzz0, libharfbuzz0a
Description: OpenType text shaping engine (shared library)
 HarfBuzz is an implementation of the OpenType Layout engine (aka layout
 engine) and the script-specific logic (aka shaping engine).
 .
 This package contains the shared libraries.
Homepage: https://harfbuzz.github.io/

Package: libheif-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 402
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libheif
Version: 1.23.4-1~deb13u1
Depends: libheif1 (= 1.23.4-1~deb13u1), libbrotli-dev, libsharpyuv-dev, libz-dev
Description: HEIF and AVIF file format decoder and encoder - development files
 libheif is an ISO/IEC 23008-12:2017 HEIF and AVIF (AV1 Image File Format) file
 format decoder and encoder. There is partial support for ISO/IEC 23008-12:2022
 (2nd Edition) capabilities.
 .
 HEIF and AVIF are new image file formats employing HEVC (H.265) or AV1 image
 coding, respectively, for the best compression ratios currently possible.
 .
 libheif supports various codecs provided by plugins for image decoding and
 encoding.
 .
 The development headers for compiling programs that use libheif are provided
 by this package.
Homepage: http://www.libheif.org

Package: libheif-examples
Status: install ok installed
Priority: optional
Section: video
Installed-Size: 522
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Source: libheif
Version: 1.23.4-1~deb13u1
Depends: libheif1 (= 1.23.4-1~deb13u1), libc6 (>= 2.38), libgcc-s1 (>= 3.0), libjpeg62-turbo (>= 1:2.0.2), libpng16-16t64 (>= 1.6.46), libstdc++6 (>= 13.1), libtiff6 (>= 4.0.3), libwebp7 (>= 1.5.0), libwebpmux3 (>= 1.5.0)
Description: HEIF and AVIF file format decoder and encoder - examples
 libheif is an ISO/IEC 23008-12:2017 HEIF and AVIF (AV1 Image File Format) file
 format decoder and encoder. There is partial support for ISO/IEC 23008-12:2022
 (2nd Edition) capabilities.
 .
 HEIF and AVIF are new image file formats employing HEVC (H.265) or AV1 image
 coding, respectively, for the best compression ratios currently possible.
 .
 libheif supports various codecs provided by plugins for image decoding and
 encoding.
 .
 Sample applications using libheif are provided by this package.
Homepage: http://www.libheif.org

Package: libheif-plugin-aomenc
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 90
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libheif
Version: 1.23.4-1~deb13u1
Depends: libheif1 (= 1.23.4-1~deb13u1), libaom3 (>= 3.2.0), libc6 (>= 2.14), libgcc-s1 (>= 3.0), libstdc++6 (>= 13)
Description: HEIF and AVIF file format decoder and encoder - aomenc plugin
 libheif is an ISO/IEC 23008-12:2017 HEIF and AVIF (AV1 Image File Format) file
 format decoder and encoder. There is partial support for ISO/IEC 23008-12:2022
 (2nd Edition) capabilities.
 .
 HEIF and AVIF are new image file formats employing HEVC (H.265) or AV1 image
 coding, respectively, for the best compression ratios currently possible.
 .
 libheif supports various codecs provided by plugins for image decoding and
 encoding.
 .
 This package contains the aomenc plugin that uses libaom to encode AV1 images.
 .
 libaom: https://aomedia.org/
Homepage: http://www.libheif.org

Package: libheif-plugin-dav1d
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 70
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libheif
Version: 1.23.4-1~deb13u1
Depends: libheif1 (= 1.23.4-1~deb13u1), libc6 (>= 2.14), libdav1d7 (>= 0.1.0), libgcc-s1 (>= 3.0), libstdc++6 (>= 13)
Description: HEIF and AVIF file format decoder and encoder - dav1d plugin
 libheif is an ISO/IEC 23008-12:2017 HEIF and AVIF (AV1 Image File Format) file
 format decoder and encoder. There is partial support for ISO/IEC 23008-12:2022
 (2nd Edition) capabilities.
 .
 HEIF and AVIF are new image file formats employing HEVC (H.265) or AV1 image
 coding, respectively, for the best compression ratios currently possible.
 .
 libheif supports various codecs provided by plugins for image decoding and
 encoding.
 .
 This package contains the dav1d plugin that uses dav1d to decode AV1 images.
 .
 dav1d: https://www.videolan.org/projects/dav1d.html
Homepage: http://www.libheif.org

Package: libheif-plugin-libde265
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 62
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libheif
Version: 1.23.4-1~deb13u1
Depends: libheif1 (= 1.23.4-1~deb13u1), libc6 (>= 2.14), libde265-0 (>= 1.0.7), libgcc-s1 (>= 3.0), libstdc++6 (>= 13)
Description: HEIF and AVIF file format decoder and encoder - libde265 plugin
 libheif is an ISO/IEC 23008-12:2017 HEIF and AVIF (AV1 Image File Format) file
 format decoder and encoder. There is partial support for ISO/IEC 23008-12:2022
 (2nd Edition) capabilities.
 .
 HEIF and AVIF are new image file formats employing HEVC (H.265) or AV1 image
 coding, respectively, for the best compression ratios currently possible.
 .
 libheif supports various codecs provided by plugins for image decoding and
 encoding.
 .
 This package contains the libde265 plugin that uses libde265 to decode HEVC
 images.
 .
 libde265: https://www.libde265.org/
Homepage: http://www.libheif.org

Package: libheif-plugin-x265
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 74
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libheif
Version: 1.23.4-1~deb13u1
Depends: libheif1 (= 1.23.4-1~deb13u1), libc6 (>= 2.14), libgcc-s1 (>= 3.0), libstdc++6 (>= 13), libx265-215 (>= 4.1)
Description: HEIF and AVIF file format decoder and encoder - x265 plugin
 libheif is an ISO/IEC 23008-12:2017 HEIF and AVIF (AV1 Image File Format) file
 format decoder and encoder. There is partial support for ISO/IEC 23008-12:2022
 (2nd Edition) capabilities.
 .
 HEIF and AVIF are new image file formats employing HEVC (H.265) or AV1 image
 coding, respectively, for the best compression ratios currently possible.
 .
 libheif supports various codecs provided by plugins for image decoding and
 encoding.
 .
 This package contains the x265 plugin that uses x265 to encode HEVC images.
 .
 x265: https://www.videolan.org/developers/x265.html
Homepage: http://www.libheif.org

Package: libheif1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2681
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libheif
Version: 1.23.4-1~deb13u1
Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.38), libgcc-s1 (>= 3.0), libsharpyuv0 (>= 1.5.0), libstdc++6 (>= 13.1), zlib1g (>= 1:1.1.4), libheif-plugin-libde265 (= 1.23.4-1~deb13u1), libheif-plugin-dav1d (= 1.23.4-1~deb13u1) | libheif-plugin-aomdec (= 1.23.4-1~deb13u1)
Recommends: libheif-plugin-x265 (= 1.23.4-1~deb13u1), libheif-plugin-aomenc (= 1.23.4-1~deb13u1)
Suggests: libheif-plugin-ffmpegdec (= 1.23.4-1~deb13u1), libheif-plugin-jpegdec (= 1.23.4-1~deb13u1), libheif-plugin-jpegenc (= 1.23.4-1~deb13u1), libheif-plugin-j2kdec (= 1.23.4-1~deb13u1), libheif-plugin-j2kenc (= 1.23.4-1~deb13u1), libheif-plugin-kvazaar (= 1.23.4-1~deb13u1), libheif-plugin-rav1e (= 1.23.4-1~deb13u1), libheif-plugin-svtenc (= 1.23.4-1~deb13u1)
Description: HEIF and AVIF file format decoder and encoder - shared library
 libheif is an ISO/IEC 23008-12:2017 HEIF and AVIF (AV1 Image File Format) file
 format decoder and encoder. There is partial support for ISO/IEC 23008-12:2022
 (2nd Edition) capabilities.
 .
 HEIF and AVIF are new image file formats employing HEVC (H.265) or AV1 image
 coding, respectively, for the best compression ratios currently possible.
 .
 libheif supports various codecs provided by plugins for image decoding and
 encoding.
 .
 This package contains the shared library.
Homepage: http://www.libheif.org

Package: libhogweed6t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 483
Maintainer: Magnus Holmgren <holmgren@debian.org>
Architecture: amd64
Multi-Arch: same
Source: nettle
Version: 3.10.1-1
Replaces: libhogweed6
Provides: libhogweed6 (= 3.10.1-1)
Depends: libc6 (>= 2.14), libgmp10 (>= 2:6.3.0+dfsg), libnettle8t64
Breaks: libhogweed6 (<< 3.10.1-1)
Description: low level cryptographic library (public-key cryptos)
 Nettle is a cryptographic library that is designed to fit easily in more or
 less any context: In crypto toolkits for object-oriented languages (C++,
 Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel
 space.
 .
 It tries to solve a problem of providing a common set of cryptographic
 algorithms for higher-level applications by implementing a
 context-independent set of cryptographic algorithms. In that light, Nettle
 doesn't do any memory allocation or I/O, it simply provides the
 cryptographic algorithms for the application to use in any environment and
 in any way it needs.
 .
 This package contains the asymmetric cryptographic algorithms, which,
 require the GNU multiple precision arithmetic library (libgmp) for
 their large integer computations.
Homepage: https://www.lysator.liu.se/~nisse/nettle/

Package: libhtml-form-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 93
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 6.12-1
Depends: perl:any, libhtml-parser-perl, libhttp-message-perl, liburi-perl
Description: module that represents an HTML form element
 Objects of the HTML::Form class represents a single HTML <form> ... </form>
 instance. A form consists of a sequence of inputs that usually have names,
 and which can take on various values. The state of a form can be tweaked and
 it can then be asked to provide HTTP::Request objects that can be passed to
 the request() method of LWP::UserAgent.
Homepage: https://metacpan.org/release/HTML-Form

Package: libhtml-format-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 122
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2.16-2
Provides: libhtml-formatter-perl (= 2.16-2)
Depends: perl:any, libfont-afm-perl, libhtml-tree-perl
Description: module for transforming HTML into various formats
 HTML::Formatter is a base class for various formatters, which are modules
 that traverse an HTML syntax tree and produce various output file formats.
 There are currently three formatter classes included:
 .
  * HTML::FormatText for converting to plain human-readable text
  * HTML::FormatPS for converting to PostScript
  * HTML::FormatRTF for converting to Microsoft's Rich Text Format (RTF)
Homepage: https://metacpan.org/release/HTML-Formatter

Package: libhtml-parser-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 229
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Version: 3.83-2~deb13u1
Depends: perl (>= 5.40.1-6), perlapi-5.40.1, libc6 (>= 2.14), libhtml-tagset-perl, liburi-perl
Recommends: libhttp-message-perl
Suggests: libdata-dump-perl
Enhances: libwww-perl
Description: collection of modules that parse HTML text documents
 HTML::Parser is a collection of modules useful for handling HTML documents.
 These modules used to be part of the libwww-perl distribution, but are now
 unbundled in order to facilitate a separate development track.
 .
 Objects of the HTML::Parser class will recognize markup and separate it from
 content data. As different kinds of markup are recognized, the corresponding
 event handler is invoked. The document to be parsed may also be supplied in
 arbitrary chunks, making on-the-fly parsing of network documents possible.
Homepage: https://metacpan.org/release/HTML-Parser

Package: libhtml-tagset-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 40
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 3.24-1
Depends: perl:any
Description: data tables pertaining to HTML
 HTML::Tagset contains data tables useful in dealing with HTML.  For instance,
 it provides %HTML::Tagset::emptyElement, which lists all of the HTML elements
 which cannot have content.  It provides no functions or methods.
Homepage: https://metacpan.org/release/HTML-Tagset

Package: libhtml-template-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 188
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 2.97-2
Depends: perl:any, libcgi-pm-perl | perl (<< 5.19)
Suggests: libipc-sharedcache-perl
Description: module for using HTML templates with Perl
 HTML::Template attempts to make using HTML templates simple and
 natural. It extends standard HTML with the pseudo tags <TMPL_VAR>,
 <TMPL_LOOP>, <TMPL_INCLUDE>, <TMPL_IF> and <TMPL_ELSE>. These are used
 to implement some basic logic - variable substitution, loops,
 conditional branches - inside the HTML template, while leaving the more
 complex computations to separate Perl code. This keeps the template
 accessible for designers and other non-Perl people, without limiting
 the programmer.
 .
 HTML::Template optionally stores its cache in shared memory using the
 IPC::SharedCache module. Please install libipc-sharedcache-perl and
 pass the shared_cache option to HTML::Template if you want to make use
 of this.
Homepage: https://metacpan.org/release/HTML-Template

Package: libhtml-tree-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 491
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 5.07-3
Depends: perl:any, libhtml-parser-perl, libhtml-tagset-perl
Recommends: libhtml-format-perl, libwww-perl
Description: Perl module to represent and create HTML syntax trees
 HTML::Tree is a collection of modules that represent, create and extract
 information from HTML syntax trees.  These modules used to be part of
 the libwww-perl distribution, but are now unbundled in order to
 facilitate a separate development track.
Homepage: https://metacpan.org/release/HTML-Tree

Package: libhttp-cookies-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 51
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 6.11-1
Depends: perl:any, libhttp-date-perl, libhttp-message-perl
Description: HTTP cookie jars
 This class is for objects that represent a "cookie jar" -- that is, a
 database of all the HTTP cookies that a given LWP::UserAgent object knows
 about.
 .
 Cookies are a general mechanism which server side connections can use to both
 store and retrieve information on the client side of the connection. For more
 information about cookies refer to
 <URL:http://curl.haxx.se/rfc/cookie_spec.html> and
 <URL:http://www.cookiecentral.com/>. HTTP::Cookies also implements the new
 style cookies described in RFC 2965. The two variants of cookies are supposed
 to be able to coexist happily.
 .
 Instances of the class HTTP::Cookies are able to store a collection of
 Set-Cookie2: and Set-Cookie: headers and are able to use this information to
 initialize Cookie-headers in HTTP::Request objects. The state of a
 HTTP::Cookies object can be saved in and restored from files.
Homepage: https://metacpan.org/release/HTTP-Cookies

Package: libhttp-daemon-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 59
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 6.16-1+deb13u1
Depends: perl:any, libhttp-date-perl, libhttp-message-perl, libio-socket-ip-perl, liblwp-mediatypes-perl, libsocket-perl
Description: simple http server class
 Instances of the HTTP::Daemon class are HTTP/1.1 servers that listen on a
 socket for incoming requests. The HTTP::Daemon is a subclass of
 IO::Socket::IP, so you can perform socket operations directly on it too.
 .
 The accept() method will return when a connection from a client is available.
 The returned value will be an HTTP::Daemon::ClientConn object which is
 another IO::Socket::IP subclass. Calling the get_request() method on this
 object will read data from the client and return an HTTP::Request object. The
 ClientConn object also provide methods to send back various responses.
 .
 This HTTP daemon does not fork(2) for you. Your application, i.e. the user of
 the HTTP::Daemon is responsible for forking if that is desirable. Also note
 that the user is responsible for generating responses that conform to the
 HTTP/1.1 protocol.
Homepage: https://metacpan.org/release/HTTP-Daemon

Package: libhttp-date-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 30
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 6.06-1
Depends: perl:any, libtime-local-perl (>= 1.28), libtimedate-perl
Description: module of date conversion routines
 HTTP::Date provides functions that deal the date formats used by the HTTP
 protocol (and then some more). Only the first two functions, time2str() and
 str2time(), are exported by default.
Homepage: https://metacpan.org/release/HTTP-Date

Package: libhttp-message-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 200
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 7.00-2
Depends: perl:any, libclone-perl (>= 0.46), libcompress-raw-bzip2-perl, libcompress-raw-zlib-perl, libencode-locale-perl, libencode-perl, libhttp-date-perl, libio-html-perl, liblwp-mediatypes-perl, liburi-perl
Recommends: libio-compress-brotli-perl
Breaks: libhtml-form-perl (<< 6.11-2~)
Description: perl interface to HTTP style messages
 The HTTP::Message distribution contains classes useful for representing the
 messages passed in HTTP style communication. These are classes representing
 requests, responses and the headers contained within them.
 .
 The HTTP::Headers class encapsulates HTTP-style message headers. The headers
 consist of attribute-value pairs also called fields, which may be repeated,
 and which are printed in a particular order. The field names are cases
 insensitive.
 .
 Instances of this class are usually created as member variables of the
 HTTP::Request and HTTP::Response classes, internal to the library.
Homepage: https://metacpan.org/release/HTTP-Message

Package: libhttp-negotiate-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 36
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 6.01-2
Depends: perl:any, libhttp-message-perl
Description: implementation of content negotiation
 HTTP::Negotiate provides a complete implementation of the HTTP content
 negotiation algorithm. Content negotiation allows for the selection of a
 preferred content representation based upon attributes of the negotiable
 variants and the value of the various Accept* header fields in the request.
Homepage: https://metacpan.org/release/HTTP-Negotiate

Package: libhwasan0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 4850
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-14
Version: 14.2.0-19
Depends: gcc-14-base (= 14.2.0-19), libc6 (>= 2.34), libgcc-s1 (>= 3.3)
Description: AddressSanitizer -- a fast memory error detector
 AddressSanitizer (HWASan) is a fast memory error detector.  It finds
 use-after-free and {heap,stack,global}-buffer overflow bugs in C/C++ programs.
Homepage: http://gcc.gnu.org/

Package: libhwy1t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 4747
Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: highway (1.2.0-2)
Version: 1.2.0-2+b2
Replaces: libhwy1
Provides: libhwy1 (= 1.2.0-2+b2)
Depends: libc6 (>= 2.25), libgcc-s1 (>= 3.0), libstdc++6 (>= 5.2)
Breaks: libhwy1 (<< 1.2.0-2)
Description: Efficient and performance-portable SIMD wrapper (runtime files)
 This library provides type-safe and source-code portable wrappers over
 existing platform-specific intrinsics. Its design aims for simplicity,
 reliable efficiency across platforms, and immediate usability with current
 compilers.
 .
 This package installs the highway runtime files.
Homepage: https://github.com/google/highway

Package: libice-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 246
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libice
Version: 2:1.1.1-1
Depends: libice6 (= 2:1.1.1-1), x11proto-dev
Suggests: libice-doc
Description: X11 Inter-Client Exchange library (development headers)
 This package provides the main interface to the X11 Inter-Client Exchange
 library, which allows for communication of data between X clients.
 .
 This package contains the development headers for the library found in libice6.
 Non-developers likely have little use for this package.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libICE

Package: libice6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 142
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libice
Version: 2:1.1.1-1
Depends: libc6 (>= 2.38), x11-common
Description: X11 Inter-Client Exchange library
 This package provides the main interface to the X11 Inter-Client Exchange
 library, which allows for communication of data between X clients.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libICE

Package: libicu-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 50061
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: icu
Version: 76.1-4
Replaces: icu-devtools (<< 76.1~rc-1~)
Depends: libicu76 (= 76.1-4), icu-devtools (>= 76.1-4), libc6-dev | libc-dev
Suggests: icu-doc
Breaks: icu-devtools (<< 76.1~rc-1~)
Description: Development files for International Components for Unicode
 ICU is a C++ and C library that provides robust and full-featured
 Unicode and locale support.  This package contains the development
 files for ICU.
Homepage: https://icu.unicode.org/

Package: libicu72
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 36170
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: icu
Version: 72.1-3+deb12u1
Replaces: libiculx63 (<< 63.1-5)
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libstdc++6 (>= 12)
Breaks: libiculx63 (<< 63.1-5), openttd (<< 1.8.0-2~)
Description: International Components for Unicode
 ICU is a C++ and C library that provides robust and full-featured
 Unicode and locale support.  This package contains the runtime
 libraries for ICU.
Homepage: https://icu.unicode.org/

Package: libicu76
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 37371
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: icu
Version: 76.1-4
Replaces: libiculx63 (<< 63.1-5)
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.0), libstdc++6 (>= 14)
Breaks: libiculx63 (<< 63.1-5), openttd (<< 1.8.0-2~)
Description: International Components for Unicode
 ICU is a C++ and C library that provides robust and full-featured
 Unicode and locale support.  This package contains the runtime
 libraries for ICU.
Homepage: https://icu.unicode.org/

Package: libidn12
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 233
Maintainer: Debian Libidn Team <help-libidn@gnu.org>
Architecture: amd64
Multi-Arch: same
Source: libidn
Version: 1.43-1
Depends: libc6 (>= 2.14)
Description: GNU Libidn library, implementation of IETF IDN specifications
 GNU Libidn is a fully documented implementation of the Stringprep,
 Punycode and IDNA specifications.  Libidn's purpose is to encode and
 decode internationalized domain names.  The Nameprep, XMPP, SASLprep,
 and iSCSI profiles are supported.
 .
 This package contains the shared library.
Homepage: https://www.gnu.org/software/libidn/

Package: libidn2-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 446
Maintainer: Debian Libidn team <help-libidn@gnu.org>
Architecture: amd64
Multi-Arch: same
Source: libidn2
Version: 2.3.8-2
Depends: libc6 (>= 2.14), libunistring5 (>= 1.1)
Description: Internationalized domain names (IDNA2008/TR46) library
 Libidn2 implements the revised algorithm for internationalized domain
 names called IDNA2008/TR46.
 .
 This package contains runtime libraries.
Homepage: https://www.gnu.org/software/libidn/#libidn2

Package: libiec61883-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 82
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libiec61883
Version: 1.2.0-7
Depends: libc6 (>= 2.4), libraw1394-11 (>= 2.1.2)
Description: partial implementation of IEC 61883 (shared lib)
 Implementation of IEC 61883, part 1 (CIP, plug registers, and CMP), part 2
 (DV-SD), part 4 (MPEG2-TS), and part 6 (AMDTP). Outside of IIDC, nearly all
 FireWire multimedia devices use IEC 61883 protocols.
 .
 The libiec61883 library provides a higher level API for streaming DV,
 MPEG-2 and audio over Linux IEEE 1394. This includes both reception and
 transmission. It uses the new "rawiso" API of libraw1394, which
 transparently provides mmap-ed DMA for efficient data transfer. It also
 represents the third generation of I/O technology for Linux 1394 for
 these media types thereby removing the complexities of additional kernel
 modules, /dev nodes, and procfs. It also consolidates features for plug
 control registers and connection management that previously existed in
 experimental form in an unreleased version of libavc1394.
Homepage: https://ieee1394.docs.kernel.org/en/latest/libiec61883.html

Package: libigdgmm12
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 858
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: intel-gmmlib
Version: 22.7.2+ds1-1
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libstdc++6 (>= 13.1)
Description: Intel Graphics Memory Management Library -- shared library
 The Intel Graphics Memory Management Library provides device specific
 and buffer management for the Intel Graphics Compute Runtime for
 OpenCL and the Intel Media Driver for VAAPI.
 .
 This library is only useful for Broadwell and newer CPUs.
 .
 This package includes the shared library.
Homepage: https://github.com/intel/gmmlib

Package: libijs-0.35
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 48
Maintainer: Debian Printing Team <debian-printing@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ijs
Version: 0.35-15.2
Depends: libc6 (>= 2.14)
Description: IJS raster image transport protocol: shared library
 IJS is, first and foremost, a protocol for transmission of raster page
 images. This snapshot provides a reference implementation of the protocol,
 the design of which is still in flux. When the protocol specification is
 published, it will be authoritative. Applications should feel free to link
 against the library provided in this package, adapt that code for their own
 needs, or roll a completely new implementation.
 .
 IJS is a client-server protocol, used to write ghostscript drivers. The
 drivers are separate programs. The client and server communicate via pipes,
 though shared memory may be used additionally in the future. Currently IJS
 is used by the hpijs and ijsgimpprint drivers.
 .
 Code for both the client- and server-side is included in the library. This
 package provides the shared library.
Homepage: http://www.linuxprinting.org/ijs/

Package: libimage-exiftool-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 27607
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 13.25+dfsg-1
Provides: exiftool
Depends: perl:any
Recommends: libarchive-zip-perl, libcompress-raw-lzma-perl, libio-compress-brotli-perl, libunicode-linebreak-perl
Suggests: libposix-strptime-perl
Description: library and program to read and write meta information in multimedia files
 Image::ExifTool is a customizable set of Perl modules plus a full-featured
 command-line application called exiftool for reading and writing meta
 information in a wide variety of files, including the maker note information
 of many digital cameras by various manufacturers such as Canon, Casio, DJI,
 FLIR, FujiFilm, GE, HP, JVC/Victor, Kodak, Leaf, Minolta/Konica-Minolta,
 Nikon, Nintendo, Olympus/Epson, Panasonic/Leica, Pentax/Asahi, Phase One,
 Reconyx, Ricoh, Samsung, Sanyo, Sigma/Foveon and Sony.
 .
 The following modules/packages are recommended for specific features, e.g.
 decoding compressed and/or encrypted information from the indicated file
 types, calculating digest values for some information types, etc.:
 .
  * Archive::Zip / libarchive-zip-perl: ZIP, DOCX, PPTX, XLSX, ODP, ODS, ODT,
    EIP, iWork
  * Unicode::LineBreak / libunicode-linebreak-perl: for column-alignment of
    alternate language output
  * POSIX::strptime / libposix-strptime-perl: for inverse date/time conversion
  * Time::Piece (in perl core): alternative to POSIX::strptime
  * IO::Compress::RawDeflate + IO::Uncompress::RawInflate (in perl core): for
    reading FLIF images
  * Compress::Raw::Lzma / libcompress-raw-lzma-perl: for reading encoded
    7z files
  * IO::Compress::Brotli + IO::Uncompress::Brotli / libio-compress-brotli-perl:
    for writing/reading compressed JXL metadata
Homepage: https://exiftool.org/

Package: libimagequant0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 91
Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libimagequant (2.18.0-1)
Version: 2.18.0-1+b2
Depends: libc6 (>= 2.29), libgomp1 (>= 4.9)
Description: palette quantization library
 Small, portable C library for high-quality conversion of RGBA
 images to 8-bit indexed-color (palette) images.
 .
 This library powers pngquant and other PNG optimizers.
Homepage: https://github.com/ImageOptim/libimagequant

Package: libimath-3-1-29t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 334
Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: imath (3.1.12-1)
Version: 3.1.12-1+b3
Replaces: libimath-3-1-29
Provides: libimath-3-1-29 (= 3.1.12-1+b3)
Depends: libc6 (>= 2.4), libstdc++6 (>= 13.1)
Breaks: libimath-3-1-29 (<< 3.1.12-1)
Description: Utility libraries from ASF used by OpenEXR - runtime
 Imath is a basic, light-weight, and efficient C++ representation of
 2D and 3D vectors and matrices and other simple but useful
 mathematical objects, functions, and data types common in computer
 graphics applications, including the “half” 16-bit floating-point type.
 .
 Imath also includes optional Python bindings for all types and
 functions, including optimized implementations of vector and
 matrix arrays.
 .
 This package provides the runtime libraries.
Homepage: https://www.openexr.com

Package: libinotifytools0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 67
Maintainer: Joao Eriberto Mota Filho <eriberto@debian.org>
Architecture: amd64
Multi-Arch: same
Source: inotify-tools (4.23.9.0-2)
Version: 4.23.9.0-2+b1
Depends: libc6 (>= 2.38)
Description: utility wrapper around inotify
 inotify (inode notify) is a Linux kernel subsystem that monitors events in
 filesystems and reports those events to applications in real time via API.
 .
 inotify can be used to monitor individual files or directories. When a
 directory is monitored, inotify will return events for the directory itself
 and for files inside the directory.
 .
 libinotifytools is a thin layer on top of the kernel interface which makes
 it easy to set up watches on many files at once, read events without having
 to deal with low-level I/O and several utility functions for inotify-related
 string formatting.
Homepage: https://github.com/rvoicilas/inotify-tools/wiki/

Package: libio-compress-brotli-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 61
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: libio-compress-brotli-perl (0.004001-2)
Version: 0.004001-2+b3
Depends: perl (>= 5.40.0-6), perlapi-5.40.0, libbrotli1 (>= 0.6.0), libc6 (>= 2.4)
Description: modules to read/write Brotli buffers/streams
 The IO-Compress-Brotli distribution wraps the Brotli library, offering Perl
 modules for compressing Brotli buffers and streams, IO::Compress::Brotli, and
 decompressing them, IO::Uncompress::Brotli.
 .
 Brotli is a data compression format primarily used in web fonts and
 HTTP compression.
Homepage: https://metacpan.org/release/IO-Compress-Brotli

Package: libio-html-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 41
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.004-3
Depends: perl:any
Description: open an HTML file with automatic charset detection
 IO::HTML provides an easy way to open a file containing HTML while
 automatically determining its encoding.  It uses the HTML5 encoding
 sniffing algorithm specified in section 8.2.2.1 of the draft standard.
Homepage: https://metacpan.org/release/IO-HTML

Package: libio-socket-ssl-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 678
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 2.089-1
Depends: perl:any, libnet-ssleay-perl, netbase
Recommends: libio-socket-ip-perl | libio-socket-inet6-perl, libsocket-perl | libsocket6-perl, liburi-perl | libnet-libidn-perl | libnet-idn-encode-perl
Suggests: ca-certificates
Description: Perl module implementing object oriented interface to SSL sockets
 This module is a true drop-in replacement for IO::Socket::INET that
 uses SSL to encrypt data before it is transferred to a remote server
 or client.  IO::Socket::SSL supports all the extra features that one
 needs to write a full-featured SSL client or server application:
 multiple SSL contexts, cipher selection, certificate verification, and
 SSL version selection.  As an extra bonus, it works perfectly with
 mod_perl.
 .
 IO::Socket::SSL uses IPv6 if libio-socket-ip-perl (>= 0.20) or
 libio-socket-inet6-perl is installed.
Homepage: https://metacpan.org/release/IO-Socket-SSL

Package: libio-stringy-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 124
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 2.113-2
Depends: perl:any
Description: modules for I/O on in-core objects (strings/arrays)
 IO::Stringy primarily provides modules for performing both traditional and
 object-oriented I/O on things *other* than normal filehandles; in particular,
 IO::Scalar, IO::ScalarArray, and IO::Lines.
 .
 The libio-stringy-perl package provides the following modules:
 .
  * IO::AtomicFile  - write a file which is updated atomically
  * IO::InnerFile   - define a file inside another file
  * IO::Lines       - IO:: interface for reading/writing an array of lines
  * IO::Scalar      - IO:: interface for reading/writing a scalar
  * IO::ScalarArray - IO:: interface for reading/writing an array of scalars
  * IO::Stringy     - I/O on in-core objects like strings and arrays
  * IO::Wrap        - wrap raw filehandles in IO::Handle interface
  * IO::WrapTie     - wrap tieable objects in IO::Handle interface
Homepage: https://metacpan.org/release/IO-Stringy

Package: libip4tc2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 66
Maintainer: Debian Netfilter Packaging Team <team+pkg-netfilter-team@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: iptables
Version: 1.8.11-2
Depends: libc6 (>= 2.14)
Description: netfilter libip4tc library
 The iptables/xtables framework has been replaced by nftables. You should
 consider migrating now.
 .
 This package contains the user-space iptables (IPv4) C library from the
 Netfilter xtables framework.
 .
 iptables IPv4 ruleset ADT and kernel interface.
 .
 This library has been considered private for years (and still is), in the
 sense of changing symbols and backward compatibility not guaranteed.
Homepage: https://www.netfilter.org/

Package: libip6tc2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 66
Maintainer: Debian Netfilter Packaging Team <team+pkg-netfilter-team@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: iptables
Version: 1.8.11-2
Depends: libc6 (>= 2.14)
Description: netfilter libip6tc library
 The iptables/xtables framework has been replaced by nftables. You should
 consider migrating now.
 .
 This package contains the user-space iptables (IPv6) C library from the
 Netfilter xtables framework.
 .
 iptables IPv6 ruleset ADT and kernel interface.
 .
 This library has been considered private for years (and still is), in the
 sense of changing symbols and backward compatibility not guaranteed.
Homepage: https://www.netfilter.org/

Package: libipc-system-simple-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 64
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.30-2
Depends: perl:any
Description: Perl module to run commands simply, with detailed diagnostics
 IPC::System::Simple takes the hard work out of calling external commands; it
 provides replacements for system() and the backtick operator that will either
 succeed, or die with rich diagnostic messages on errors.
 .
 The module also includes the ability to specify acceptable exit values, trap
 errors, or process diagnostics.
Homepage: https://metacpan.org/release/IPC-System-Simple

Package: libipset13t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 270
Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ipset (7.22-1)
Version: 7.22-1+b1
Replaces: libipset13
Provides: libipset13 (= 7.22-1+b1)
Depends: libc6 (>= 2.34), libmnl0 (>= 1.0.3-4~)
Breaks: libipset13 (<< 7.22-1)
Description: library for IP sets
 IP sets are a framework inside the Linux 2.4.x and 2.6.x kernel which can be
 administered by the ipset(8) utility. Depending on the type, currently an
 IP set may store IP addresses, (TCP/UDP) port numbers or IP addresses with
 MAC addresses in a  way which ensures lightning speed when matching an
 entry against a set.
 .
 If you want to
 .
  * store multiple IP addresses or port numbers and match against the
    entire collection using a single iptables rule.
  * dynamically update iptables rules against IP addresses or ports without
    performance penalty.
  * express complex IP address and ports based rulesets with a single
    iptables rule and benefit from the speed of IP sets.
 .
 then IP sets may be the proper tool for you.
 .
 This package contains the shared libraries needed to run programs that use
 the IP sets library.
Homepage: https://ipset.netfilter.org/

Package: libisl23
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2253
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: isl
Version: 0.27-1
Replaces: libisl-dbg (<< 0.19)
Depends: libc6 (>= 2.14), libgmp10 (>= 2:6.3.0+dfsg)
Breaks: libisl-dbg (<< 0.19)
Description: manipulating sets and relations of integer points bounded by linear constraints
 isl is a library for manipulating sets and relations of integer points
 bounded by linear constraints. Supported operations on sets include
 intersection, union, set difference, emptiness check, convex hull,
 (integer) affine hull, integer projection, and computing the lexicographic
 minimum using parametric integer programming. It also includes an ILP solver
 based on generalized basis reduction.
 .
 This package contains the runtime library.
Homepage: https://openhub.net/p/isl

Package: libitm1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 115
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-14
Version: 14.2.0-19
Depends: gcc-14-base (= 14.2.0-19), libc6 (>= 2.34)
Description: GNU Transactional Memory Library
 GNU Transactional Memory Library (libitm) provides transaction support for
 accesses to the memory of a process, enabling easy-to-use synchronization of
 accesses to shared memory by several threads.
Homepage: http://gcc.gnu.org/

Package: libjack-jackd2-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1165
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: jackd2
Version: 1.9.22~dfsg-4
Replaces: libjack-0.116, libjack-0.125
Provides: libjack-0.116, libjack-0.125
Depends: libc6 (>= 2.38), libdb5.3t64, libgcc-s1 (>= 3.0), libopus0 (>= 1.3.1-2~), libsamplerate0 (>= 0.1.7), libstdc++6 (>= 14)
Suggests: jackd2 (= 1.9.22~dfsg-4)
Conflicts: libjack-0.116, libjack-0.125, libjack0
Description: JACK Audio Connection Kit (libraries)
 JACK is a low-latency sound server, allowing multiple applications to
 connect to one audio device, and to share audio between themselves.
 .
 This package contains the shared libraries.
Homepage: https://jackaudio.org/

Package: libjansson4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 100
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: amd64
Multi-Arch: same
Source: jansson (2.14-2)
Version: 2.14-2+b3
Depends: libc6 (>= 2.38)
Description: C library for encoding, decoding and manipulating JSON data
 Jansson is a C library for encoding, decoding and manipulating JSON data.
 .
 It features:
  * Simple and intuitive API and data model
  * Comprehensive documentation
  * No dependencies on other libraries
  * Full Unicode support (UTF-8)
  * Extensive test suite
Homepage: http://www.digip.org/jansson/

Package: libjbig-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 94
Maintainer: Michael van der Kolff <mvanderkolff@gmail.com>
Architecture: amd64
Multi-Arch: same
Source: jbigkit (2.1-6.1)
Version: 2.1-6.1+b2
Depends: libjbig0 (= 2.1-6.1+b2)
Description: JBIGkit development files
 JBIG-KIT provides a portable library of compression and decompression functions
 with a documented interface that you can include very easily into your image or
 document processing software.
 .
 This package contains the headers for the library.
 .
 Please note: There is no statically linked library in this package, and what
 was previously two libraries with a single common file has been merged into
 one library (libjbig).
Homepage: http://www.cl.cam.ac.uk/~mgk25/jbigkit/

Package: libjbig0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 85
Maintainer: Michael van der Kolff <mvanderkolff@gmail.com>
Architecture: amd64
Multi-Arch: same
Source: jbigkit (2.1-6.1)
Version: 2.1-6.1+b2
Depends: libc6 (>= 2.4)
Description: JBIGkit libraries
 JBIG-KIT provides a portable library of compression and decompression functions
 with a documented interface that you can include very easily into your image or
 document processing software.
 .
 This package contains the dynamically linked library.
Homepage: http://www.cl.cam.ac.uk/~mgk25/jbigkit/

Package: libjbig2dec0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 180
Maintainer: Debian Printing Team <debian-printing@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: jbig2dec
Version: 0.20-1+deb13u1
Depends: libc6 (>= 2.14)
Description: JBIG2 decoder library - shared libraries
 jbig2dec is a decoder library and example utility implementing the JBIG2
 bi-level image compression spec. Also known as ITU T.88 and ISO IEC
 14492, and included by reference in Adobe's PDF version 1.4 and later.
 .
 This package contains the shared library libjbig2dec.
Homepage: https://jbig2dec.com/

Package: libjemalloc2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 876
Maintainer: Faidon Liambotis <paravoid@debian.org>
Architecture: amd64
Multi-Arch: same
Source: jemalloc
Version: 5.3.0-3
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.3), libstdc++6 (>= 4.4)
Description: general-purpose scalable concurrent malloc(3) implementation
 A library providing a malloc(3) implementation for multi-threaded processes on
 multi-processor systems.
 .
 Notable features are reduced lock contention, predictable low fragmentation,
 and introspection with heap profiling.
Homepage: https://jemalloc.net/

Package: libjpeg-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 108
Maintainer: Ondřej Surý <ondrej@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libjpeg-turbo
Version: 1:2.1.5-4
Depends: libjpeg62-turbo-dev (>= 1:2.1.5-4)
Conflicts: libjpeg62-dev, libjpeg7-dev, libjpeg8-dev, libjpeg9-dev
Description: Development files for the JPEG library [dummy package]
 This package depends on default Debian implementation of
 libjpeg.so.62 JPEG library.
Homepage: https://www.libjpeg-turbo.org/

Package: libjpeg62-turbo
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 694
Maintainer: Ondřej Surý <ondrej@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libjpeg-turbo
Version: 1:2.1.5-4
Replaces: libjpeg62
Provides: libjpeg62 (= 1:2.1.5-4)
Depends: libc6 (>= 2.14)
Conflicts: libjpeg62
Description: libjpeg-turbo JPEG runtime library
 The libjpeg-turbo JPEG library is a library for handling JPEG files.
 .
 libjpeg-turbo is a JPEG image codec that uses SIMD instructions (MMX,
 SSE2, NEON) to accelerate baseline JPEG compression and decompression
 on x86, x86-64, and ARM systems.  The libjpeg-turbo JPEG library is
 an API/ABI compatible with the IJG JPEG library.
 .
 This package contains the shared runtime library.
Homepage: https://www.libjpeg-turbo.org/

Package: libjpeg62-turbo-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1119
Maintainer: Ondřej Surý <ondrej@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libjpeg-turbo
Version: 1:2.1.5-4
Replaces: libjpeg62-dev, libjpeg7-dev, libjpeg8-dev, libjpeg9-dev
Provides: libjpeg-dev
Depends: libc-dev, libjpeg62-turbo (= 1:2.1.5-4)
Conflicts: libjpeg62-dev, libjpeg7-dev, libjpeg8-dev, libjpeg9-dev
Description: Development files for the libjpeg-turbo JPEG library
 The libjpeg-turbo JPEG library is a library for handling JPEG files.
 .
 libjpeg-turbo is a JPEG image codec that uses SIMD instructions (MMX,
 SSE2, NEON) to accelerate baseline JPEG compression and decompression
 on x86, x86-64, and ARM systems.  The libjpeg-turbo JPEG library is
 an API/ABI compatible with the IJG JPEG library.
 .
 This package contains the static library, headers and documentation.
Homepage: https://www.libjpeg-turbo.org/

Package: libjson-c5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 112
Maintainer: Nicolas Mora <babelouest@debian.org>
Architecture: amd64
Multi-Arch: same
Source: json-c
Version: 0.18+ds-1
Depends: libc6 (>= 2.38)
Description: JSON manipulation library - shared library
 This library allows you to easily construct JSON objects in C,
 output them as JSON formatted strings and parse JSON formatted
 strings back into the C representation of JSON objects.
Homepage: https://github.com/json-c/json-c/wiki

Package: libjxl0.11
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3643
Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: jpeg-xl
Version: 0.11.2-0.1~deb13u3
Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.38), libgcc-s1 (>= 3.4), libhwy1t64 (>= 1.0.0), liblcms2-2 (>= 2.13), libstdc++6 (>= 12)
Description: JPEG XL Image Coding System - "JXL" (shared libraries)
 The JPEG XL Image Coding System (ISO/IEC 18181) is a lossy and
 lossless image compression format. It has a rich feature set and is
 particularly optimized for responsive web environments, so that
 content renders well on a wide range of devices. Moreover, it includes
 several features that help transition from the legacy JPEG format.
 .
 This package installs shared libraries.
Homepage: https://github.com/libjxl/libjxl

Package: libjxl0.7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3472
Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: jpeg-xl
Version: 0.7.0-10+deb12u1
Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.35), libgcc-s1 (>= 3.4), libhwy1 (>= 0.16.0), liblcms2-2 (>= 2.13), libstdc++6 (>= 12)
Description: JPEG XL Image Coding System - "JXL" (shared libraries)
 The JPEG XL Image Coding System (ISO/IEC 18181) is a lossy and
 lossless image compression format. It has a rich feature set and is
 particularly optimized for responsive web environments, so that
 content renders well on a wide range of devices. Moreover, it includes
 several features that help transition from the legacy JPEG format.
 .
 This package installs shared libraries.
Homepage: https://github.com/libjxl/libjxl

Package: libjxr-tools
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 72
Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: jxrlib
Version: 1.2~git20170615.f752187-5.3
Depends: libc6 (>= 2.34), libjxr0t64 (>= 1.0)
Description: JPEG-XR lib - command line apps
 JPEG XR is an approved ISO/IEC International standard (its official
 designation is ISO/IEC 29199-2).
 .
 JPEG XR started its life in Microsoft Research. It publicly first appeared as
 the HD Photo format in Windows Vista.
 .
 For web developers, JPEG XR has a large number of interesting features, see
 the table below. Some of these are big advantages over other image formats
 like JPEG, PNG, OpenEXR, and TIFF.
  - Better Compression (40% smaller than JPEG)
  - Lossless Mode (better compression than PNG)
  - Alpha Channel (compress color lossy and alpha losslessly)
  - Extended Bitdepth (supports 8-, 16-, and 32-bit/channel)
  - Progressive Decode
  - Advanced Decoding Features (tile-based layout, for efficient
    region-of-interest access.)
 .
 Provides command line tools for JPEG XR libs (JxrDecApp & JxrEncApp)
Homepage: https://github.com/4creators/jxrlib

Package: libjxr0t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 437
Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: jxrlib
Version: 1.2~git20170615.f752187-5.3
Replaces: libjxr0
Provides: libjxr0 (= 1.2~git20170615.f752187-5.3)
Depends: libc6 (>= 2.29)
Breaks: libjxr0 (<< 1.2~git20170615.f752187-5.3)
Description: JPEG-XR lib - libraries
 JPEG XR is an approved ISO/IEC International standard (its official
 designation is ISO/IEC 29199-2).
 .
 JPEG XR started its life in Microsoft Research. It publicly first appeared as
 the HD Photo format in Windows Vista.
 .
 For web developers, JPEG XR has a large number of interesting features, see
 the table below. Some of these are big advantages over other image formats
 like JPEG, PNG, OpenEXR, and TIFF.
  - Better Compression (40% smaller than JPEG)
  - Lossless Mode (better compression than PNG)
  - Alpha Channel (compress color lossy and alpha losslessly)
  - Extended Bitdepth (supports 8-, 16-, and 32-bit/channel)
  - Progressive Decode
  - Advanced Decoding Features (tile-based layout, for efficient
    region-of-interest access.)
Homepage: https://github.com/4creators/jxrlib

Package: libk5crypto3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 266
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.21.3-5+deb13u1
Depends: libc6 (>= 2.38), libkrb5support0 (= 1.21.3-5+deb13u1)
Suggests: krb5-doc, krb5-user
Breaks: libgssapi-krb5-2 (<= 1.18~), libkrb5-3 (<= 1.18~)
Description: MIT Kerberos runtime libraries - Crypto Library
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime cryptography libraries used by
 applications and Kerberos clients.
Homepage: https://web.mit.edu/kerberos/

Package: libkeyutils1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 41
Maintainer: Christian Kastner <ckk@debian.org>
Architecture: amd64
Multi-Arch: same
Source: keyutils
Version: 1.6.3-6
Depends: libc6 (>= 2.14)
Description: Linux Key Management Utilities (library)
 Keyutils is a set of utilities for managing the key retention facility in the
 kernel, which can be used by filesystems, block devices and more to gain and
 retain the authorization and encryption keys required to perform secure
 operations.
 .
 This package provides a wrapper library for the key management facility system
 calls.
Homepage: https://git.kernel.org/pub/scm/linux/kernel/git/dhowells/keyutils.git

Package: libklibc
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 98
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: klibc
Version: 2.0.14-1
Description: minimal libc subset for use with initramfs
 klibc is intended to be a minimalistic libc subset for use with
 initramfs.  It is deliberately written for small size, minimal
 entanglement, and portability, not speed.  It is definitely a work in
 progress, and a lot of things are still missing.
Homepage: https://git.kernel.org/cgit/libs/klibc/klibc.git

Package: libkmod2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 144
Maintainer: Marco d'Itri <md@linux.it>
Architecture: amd64
Multi-Arch: same
Source: kmod
Version: 34.2-2
Depends: libc6 (>= 2.38), libssl3t64 (>= 3.0.0)
Description: libkmod shared library
 This library provides an API for insertion, removal, configuration and
 listing of kernel modules.

Package: libkrb5-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1074
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.21.3-5+deb13u1
Depends: libkrb5support0 (= 1.21.3-5+deb13u1), libc6 (>= 2.38), libcom-err2 (>= 1.43.9), libk5crypto3 (>= 1.20), libkeyutils1 (>= 1.5.9), libssl3t64 (>= 3.0.0)
Recommends: krb5-locales
Suggests: krb5-doc, krb5-user
Breaks: libapache2-mod-auth-kerb (<= 5.4-2.4)
Description: MIT Kerberos runtime libraries
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library for the main Kerberos v5 API
 used by applications and Kerberos clients.
Homepage: https://web.mit.edu/kerberos/

Package: libkrb5support0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 137
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.21.3-5+deb13u1
Depends: libc6 (>= 2.38)
Breaks: krb5-admin-server (<< 1.20.1-4~), krb5-kdc (<< 1.20.1-4~), krb5-pkinit (<< 1.20.1-4~), krb5-user (<< 1.20.1-4~), libgssapi-krb5-2 (<< 1.20), libk5crypto3 (<< 1.20.1-4~), libkadm5clnt-mit9 (<< 1.13~alpha1-1), libkadm5srv-mit12 (<< 1.20.1-4~), libkadm5srv-mit9 (<< 1.13~alpha1-1), libkdb5-10t64 (<< 1.20.1-4~), libkdb5-8 (<< 1.16), libkrb5-3 (<< 1.20.1-4~)
Description: MIT Kerberos runtime libraries - Support library
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains an internal runtime support library used by other
 Kerberos libraries.
Homepage: https://web.mit.edu/kerberos/

Package: libksba8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 330
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libksba (1.6.7-2)
Version: 1.6.7-2+b1
Depends: libc6 (>= 2.38), libgpg-error0 (>= 1.46)
Description: X.509 and CMS support library
 KSBA (pronounced Kasbah) is a library to make X.509 certificates as
 well as the CMS easily accessible by other applications.  Both
 specifications are building blocks of S/MIME and TLS.
 .
 KSBA provides these subsystems: ASN.1 Parser, BER Decoder, BER
 Encoder, Certificate Handling and CMS Handling.
 .
 This package contains the runtime library files.
Homepage: https://www.gnupg.org/related_software/libksba/

Package: liblapack3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 7453
Maintainer: Debian Science Team <debian-science-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: lapack
Version: 3.12.1-6
Provides: liblapack.so.3
Depends: libblas3 | libblas.so.3, libc6 (>= 2.29), libgcc-s1 (>= 4.0), libgfortran5 (>= 8)
Description: Library of linear algebra routines 3 - shared version
 LAPACK version 3.X is a comprehensive FORTRAN library that does
 linear algebra operations including matrix inversions, least
 squared solutions to linear sets of equations, eigenvector
 analysis, singular value decomposition, etc. It is a very
 comprehensive and reputable package that has found extensive
 use in the scientific community.
 .
 This package contains a shared version of the library.
Homepage: https://www.netlib.org/lapack/

Package: liblastlog2-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 75
Maintainer: Chris Hofstaedtler <zeha@debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.41.5-0+deb13u1
Depends: libc6 (>= 2.38), libsqlite3-0 (>= 3.5.9)
Description: lastlog2 database shared library
 Y2038 safe lastlog database implementation, library files.
Homepage: https://github.com/util-linux/util-linux

Package: liblcms2-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 454
Maintainer: Thomas Weber <tweber@debian.org>
Architecture: amd64
Multi-Arch: same
Source: lcms2
Version: 2.16-2+deb13u2
Depends: libc6 (>= 2.29)
Suggests: liblcms2-utils
Description: Little CMS 2 color management library
 LittleCMS 2 intends to be a small-footprint color management engine, with
 special focus on accuracy and performance. It uses the International Color
 Consortium standard (ICC) of color management. LittleCMS 2 is a full
 implementation of ICC specification 4.2 plus all addendums. It fully supports
 all V2 and V4 profiles, including abstract, devicelink and named color
 profiles.
 .
 This package contains the shared library of liblcms2.
Homepage: http://www.littlecms.com/

Package: liblcms2-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2897
Maintainer: Thomas Weber <tweber@debian.org>
Architecture: amd64
Multi-Arch: same
Source: lcms2
Version: 2.16-2+deb13u2
Replaces: liblcms-dev
Provides: liblcms-dev
Depends: liblcms2-2 (= 2.16-2+deb13u2)
Conflicts: liblcms-dev
Description: Little CMS 2 color management library development headers
 LittleCMS 2 intends to be a small-footprint color management engine, with
 special focus on accuracy and performance. It uses the International Color
 Consortium standard (ICC) of color management. Little CMS 2 is a full
 implementation of ICC specification 4.2 plus all addendums. It fully supports
 all V2 and V4 profiles, including abstract, devicelink and named color
 profiles.
 .
 This package contains the development headers used for building software that
 uses Little CMS.
Homepage: http://www.littlecms.com/

Package: libldap-2.5-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 553
Maintainer: Debian OpenLDAP Maintainers <pkg-openldap-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: openldap
Version: 2.5.13+dfsg-5
Replaces: libldap-2.3-0, libldap2
Depends: libc6 (>= 2.34), libgnutls30 (>= 3.7.5), libsasl2-2 (>= 2.1.28+dfsg)
Recommends: libldap-common
Conflicts: ldap-utils (<= 2.1.23-1)
Description: OpenLDAP libraries
 These are the run-time libraries for the OpenLDAP (Lightweight Directory
 Access Protocol) servers and clients.
Homepage: https://www.openldap.org/

Package: libldap-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 99
Maintainer: Debian OpenLDAP Maintainers <pkg-openldap-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: openldap
Version: 2.6.10+dfsg-1
Conffiles:
 /etc/ldap/ldap.conf 9d6275762648fab5505ab15ba6102d52
Description: OpenLDAP common files for libraries
 These are common files for the run-time libraries for the OpenLDAP
 (Lightweight Directory Access Protocol) servers and clients.
Homepage: https://www.openldap.org/

Package: libldap2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 576
Maintainer: Debian OpenLDAP Maintainers <pkg-openldap-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: openldap
Version: 2.6.10+dfsg-1
Depends: libc6 (>= 2.38), libsasl2-2 (>= 2.1.28+dfsg1), libssl3t64 (>= 3.0.0)
Recommends: libldap-common
Description: OpenLDAP libraries
 These are the run-time libraries for the OpenLDAP (Lightweight Directory
 Access Protocol) servers and clients.
Homepage: https://www.openldap.org/

Package: liblerc-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1031
Maintainer: Debian GIS Project <pkg-grass-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: lerc
Version: 4.0.0+ds-5
Depends: liblerc4 (= 4.0.0+ds-5)
Description: Limited Error Raster Compression library (Development files)
 LERC is an open-source image or raster format which
 supports rapid encoding and decoding for any pixel
 type (not just RGB or Byte). Users set the maximum
 compression error per pixel while encoding, so the
 precision of the original input image is preserved
 (within user defined error bounds).
 .
 This is a development package of LERC.
Homepage: https://github.com/Esri/lerc

Package: liblerc4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 603
Maintainer: Debian GIS Project <pkg-grass-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: lerc
Version: 4.0.0+ds-5
Depends: libc6 (>= 2.29), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 11)
Description: Limited Error Raster Compression library
 LERC is an open-source image or raster format which
 supports rapid encoding and decoding for any pixel
 type (not just RGB or Byte). Users set the maximum
 compression error per pixel while encoding, so the
 precision of the original input image is preserved
 (within user defined error bounds).
Homepage: https://github.com/Esri/lerc

Package: liblilv-0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 122
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: lilv
Version: 0.24.26-1
Depends: libc6 (>= 2.34), libserd-0-0 (>= 0.30.2), libsord-0-0 (>= 0.14.0~dfsg0), libsratom-0-0 (>= 0.4.6~dfsg0), libzix-0-0 (>= 0.6.2)
Description: library for simple use of LV2 plugins
 Lilv (formerly SLV2) is a library for LV2 hosts intended to make using
 LV2 Plugins as simple as possible (without sacrificing capabilities).
 .
 Lilv is the successor to SLV2, rewritten to be significantly faster
 and have minimal dependencies.
 .
 This package provides the shared library.
Homepage: https://drobilla.net/software/lilv.html

Package: liblinear4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 108
Maintainer: Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: liblinear (2.3.0+dfsg-5)
Version: 2.3.0+dfsg-5+b2
Depends: libblas3 | libblas.so.3, libc6 (>= 2.38), libgcc-s1 (>= 3.0), libstdc++6 (>= 5)
Suggests: liblinear-tools (= 2.3.0+dfsg-5+b2), liblinear-dev (= 2.3.0+dfsg-5+b2)
Description: Library for Large Linear Classification
 LIBLINEAR is a library for learning linear classifiers for large scale
 applications. It supports Support Vector Machines (SVM) with L2 and L1
 loss, logistic regression, multi class classification and also Linear
 Programming Machines (L1-regularized SVMs). Its computational complexity
 scales linearly with the number of training examples making it one of
 the fastest SVM solvers around. It also provides Python bindings.
 .
 This package contains the shared libraries.
Homepage: https://www.csie.ntu.edu.tw/~cjlin/liblinear/

Package: libllvm15
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 114610
Maintainer: LLVM Packaging Team <pkg-llvm-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: llvm-toolchain-15 (1:15.0.6-4)
Version: 1:15.0.6-4+b1
Depends: libc6 (>= 2.36), libedit2 (>= 2.11-20080614-0), libffi8 (>= 3.4), libgcc-s1 (>= 3.3), libstdc++6 (>= 12), libtinfo6 (>= 6), libxml2 (>= 2.7.4), libz3-4 (>= 4.8.12), zlib1g (>= 1:1.2.0)
Description: Modular compiler and toolchain technologies, runtime library
 LLVM is a collection of libraries and tools that make it easy to build
 compilers, optimizers, just-in-time code generators, and many other
 compiler-related programs.
 .
 This package contains the LLVM runtime library.
Homepage: https://www.llvm.org/

Package: libllvm19
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 126696
Maintainer: LLVM Packaging Team <pkg-llvm-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: llvm-toolchain-19 (1:19.1.7-3)
Version: 1:19.1.7-3+b1
Replaces: llvm-19-dev (<< 1:19.1.0~++rc3-1~exp2)
Depends: libc6 (>= 2.38), libedit2 (>= 2.11-20080614-0), libffi8 (>= 3.4), libgcc-s1 (>= 4.3), libstdc++6 (>= 12), libxml2 (>= 2.7.4), libz3-4 (>= 4.13.3), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.2.0)
Breaks: llvm-19-dev (<< 1:19.1.0~++rc3-1~exp2)
Description: Modular compiler and toolchain technologies, runtime library
 LLVM is a collection of libraries and tools that make it easy to build
 compilers, optimizers, just-in-time code generators, and many other
 compiler-related programs.
 .
 This package contains the LLVM runtime library.
Homepage: https://www.llvm.org/

Package: liblmdb0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 104
Maintainer: LMDB <lmdb@packages.debian.org>
Architecture: amd64
Multi-Arch: same
Source: lmdb (0.9.31-1)
Version: 0.9.31-1+b2
Depends: libc6 (>= 2.38)
Description: Lightning Memory-Mapped Database shared library
 This package contains the LMDB shared library.
 .
 Lighting Memory-Mapped Database (LMDB) is an ultra-fast, ultra-compact
 key-value embedded data store developed for the OpenLDAP Project.  It uses
 memory-mapped files, so it has the read performance of a pure in-memory
 database while still offering the persistence of standard disk-based
 databases, and is only limited to the size of the virtual address space, (it
 is not limited to the size of physical RAM).
Homepage: https://symas.com/mdb/

Package: liblocale-gettext-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 53
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: liblocale-gettext-perl (1.07-7)
Version: 1.07-7+b1
Depends: libc6 (>= 2.3)
Pre-Depends: perl-base (>= 5.40.0-6), perlapi-5.40.0
Description: module using libc functions for internationalization in Perl
 The Locale::gettext module permits access from perl to the gettext() family of
 functions for retrieving message strings from databases constructed
 to internationalize software.
 .
 It provides gettext(), dgettext(), dcgettext(), textdomain(),
 bindtextdomain(), bind_textdomain_codeset(), ngettext(), dcngettext()
 and dngettext().
Homepage: https://metacpan.org/release/Locale-gettext

Package: liblockfile-bin
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 47
Maintainer: Miquel van Smoorenburg <miquels@cistron.nl>
Architecture: amd64
Multi-Arch: foreign
Source: liblockfile
Version: 1.17-2
Replaces: liblockfile1 (<< 1.09-1)
Depends: libc6 (>= 2.38)
Breaks: liblockfile1 (<< 1.09-1)
Description: support binaries for and cli utilities based on liblockfile
 This package contains support binaries for the liblockfile library,
 and the command-line utility ``dotlockfile''.
Homepage: https://github.com/miquels/liblockfile

Package: liblockfile1
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 39
Maintainer: Miquel van Smoorenburg <miquels@cistron.nl>
Architecture: amd64
Multi-Arch: same
Source: liblockfile
Version: 1.17-2
Depends: libc6 (>= 2.38), liblockfile-bin (>= 1.17-2)
Description: NFS-safe locking library
 Liblockfile is a shared library with NFS-safe locking functions.
Homepage: https://github.com/miquels/liblockfile

Package: liblqr-1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 84
Maintainer: Bernd Zeimetz <bzed@debian.org>
Architecture: amd64
Multi-Arch: same
Source: liblqr (0.4.2-2.1)
Version: 0.4.2-2.1+b2
Depends: libc6 (>= 2.27), libglib2.0-0t64 (>= 2.24.0)
Description: converts plain array images into multi-size representation
 The LiquidRescale (lqr) library provides a C/C++ API for performing
 non-uniform resizing of images by the seam-carving technique.
 .
 The library takes images in plain array format as input and converts
 them to a multi-size representation.
 .
 Following is a list of features:
 .
   * Areas in the image can be marked for preservation or discard
   * Once the image has been fully processed, the scaling can be done
     in real-time. In fact, the information can be saved and read out
     later without any further processing
   * The resizing is done with a single function which automatically
     performs all the necessary operations; it can also work in
     successive steps without wasting computational time
   * Possibility to tune the carving operation by letting the seams be
     less connected, or more rigid, or both
   * Can export and import the visibility map (the seams)
   * Other images can be attached and undergo the same carving process
     as the parent image
   * The automatic feature detection algorithm can be tuned by
     selecting among different energy gradient functions
   * Reports progress through a customizable interface
   * A signalling system permits one to cleanly handle errors
 .
 The library implements the algorithm described in the paper "Seam
 Carving for Content-Aware Image Resizing" by Shai Avidan and Ariel
 Shamir, which can be found at
 http://www.faculty.idc.ac.il/arik/imret.pdf
 .
 This package contains the shared library.
Homepage: http://liblqr.wikidot.com/

Package: liblsan0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3782
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-14
Version: 14.2.0-19
Depends: gcc-14-base (= 14.2.0-19), libc6 (>= 2.34), libgcc-s1 (>= 3.3)
Description: LeakSanitizer -- a memory leak detector (runtime)
 LeakSanitizer (Lsan) is a memory leak detector which is integrated
 into AddressSanitizer.
Homepage: http://gcc.gnu.org/

Package: liblsof0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 229
Maintainer: Andres Salomon <dilinger@debian.org>
Architecture: amd64
Source: lsof
Version: 4.99.4+dfsg-2
Depends: libc6 (>= 2.34), libselinux1 (>= 3.1~)
Description: utility to list open files (shared library)
 Lsof is a Unix-specific diagnostic tool.  Its name stands
 for LiSt Open Files, and it does just that.  It lists
 information about any files that are open, by processes
 currently running on the system.
 .
 This package contains the shared libraries used by the tool.
Homepage: https://github.com/lsof-org/lsof

Package: libltdl-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 973
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libtool
Version: 2.5.4-4
Replaces: libbtldl3-dev
Provides: libltdl3-dev
Depends: libltdl7 (= 2.5.4-4), automake-1.17
Recommends: libtool
Suggests: libtool-doc
Conflicts: libltdl3-dev
Description: System independent dlopen wrapper for GNU libtool (headers)
 This package contains the header files and static libraries for the
 libltdl package.
 .
 A small library that aims at hiding the various difficulties of
 dlopening libraries from programmers.  It is a system independent
 dlopen wrapper for GNU libtool.
 .
 It supports the following dlopen interfaces:
   * dlopen (Solaris, Linux and various BSD flavors)
   * shl_load (HP-UX)
   * LoadLibrary (Win16 and Win32)
   * load_add_on (BeOS)
   * GNU DLD (emulates dynamic linking for static libraries)
   * libtool's dlpreopen
Homepage: https://www.gnu.org/software/libtool/

Package: libltdl7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 447
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libtool
Version: 2.5.4-4
Depends: libc6 (>= 2.38)
Description: System independent dlopen wrapper for GNU libtool
 This package contains the run-time libltdl library.
 .
 A small library that aims at hiding the various difficulties of
 dlopening libraries from programmers.  It is a system independent
 dlopen wrapper for GNU libtool.
 .
 It supports the following dlopen interfaces:
   * dlopen (Solaris, Linux and various BSD flavors)
   * shl_load (HP-UX)
   * LoadLibrary (Win16 and Win32)
   * load_add_on (BeOS)
   * GNU DLD (emulates dynamic linking for static libraries)
   * libtool's dlpreopen
Homepage: https://www.gnu.org/software/libtool/

Package: liblua5.3-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 512
Maintainer: Debian Lua Team <pkg-lua-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: lua5.3 (5.3.6-2)
Version: 5.3.6-2+b4
Depends: libc6 (>= 2.38), libstdc++6 (>= 4.1.1)
Description: Shared library for the Lua interpreter version 5.3
 Lua is a powerful, light-weight programming language designed for extending
 applications.  The language engine is accessible as a library, having a C
 API which allows the application to exchange data with Lua programs and also
 to extend Lua with C functions.  Lua is also used as a general-purpose,
 stand-alone language through the simple command line interpreter provided.
 .
 This package contains runtime libraries.  You shouldn't need to install it
 explicitly.
Homepage: https://www.lua.org

Package: liblua5.4-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 580
Maintainer: Debian Lua Team <pkg-lua-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: lua5.4 (5.4.7-1)
Version: 5.4.7-1+b2
Depends: libc6 (>= 2.38), libstdc++6 (>= 4.1.1)
Description: Shared library for the Lua interpreter version 5.4
 Lua is a powerful, light-weight programming language designed for extending
 applications.  The language engine is accessible as a library, having a C
 API which allows the application to exchange data with Lua programs and also
 to extend Lua with C functions.  Lua is also used as a general-purpose,
 stand-alone language through the simple command line interpreter provided.
 .
 This package contains runtime libraries.  You shouldn't need to install it
 explicitly.
Homepage: http://www.lua.org

Package: liblwp-mediatypes-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 74
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 6.04-2
Depends: perl:any
Description: module to guess media type for a file or a URL
 LWP::MediaTypes provides functions for handling media (also known as MIME)
 types and encodings. The mapping from file extensions to media types is
 defined by the media.types file. If the ~/.media.types file exists it is used
 instead. For backwards compatibility it will also look for ~/.mime.types.
Homepage: https://metacpan.org/release/LWP-MediaTypes

Package: liblwp-protocol-https-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 26
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 6.14-1
Depends: perl:any, ca-certificates, libio-socket-ssl-perl, libnet-http-perl, libwww-perl
Suggests: libcrypt-ssleay-perl
Description: HTTPS driver for LWP::UserAgent
 The LWP::Protocol::https module provides support for using HTTPS schemed URLs
 with LWP. LWP::Protocol::https is a plug-in to the LWP protocol handling, so
 you don't use it directly. Once the module is installed LWP is able to access
 sites using HTTP over SSL/TLS.
 .
 If hostname verification is requested by LWP::UserAgent's ssl_opts, and
 neither SSL_ca_file nor SSL_ca_path is set, then SSL_ca_file is implied to be
 the one provided by ca-certificates.
 .
 This module used to be bundled with libwww-perl, but it was unbundled in
 v6.02 in order to be able to declare its dependencies properly for the CPAN
 tool-chain. Applications that need HTTPS support can just declare their
 dependency on LWP::Protocol::https and will no longer need to know what
 underlying modules to install.
Homepage: https://metacpan.org/release/LWP-Protocol-https

Package: liblz4-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 173
Maintainer: Nobuhiro Iwamatsu <iwamatsu@debian.org>
Architecture: amd64
Multi-Arch: same
Source: lz4
Version: 1.10.0-4
Replaces: liblz4-1a
Depends: libc6 (>= 2.14), libxxhash0 (>= 0.6.5)
Breaks: liblz4-1a
Description: Fast LZ compression algorithm library - runtime
 LZ4 is a very fast lossless compression algorithm, providing compression speed
 at 400 MB/s per core, scalable with multi-cores CPU. It also features an
 extremely fast decoder, with speed in multiple GB/s per core, typically
 reaching RAM speed limits on multi-core systems.
 .
 This package includes the shared library.
Homepage: https://github.com/lz4/lz4

Package: liblzf1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 36
Maintainer: Timo Röhling <roehling@debian.org>
Architecture: amd64
Multi-Arch: same
Source: liblzf (3.6-4)
Version: 3.6-4+b3
Depends: libc6 (>= 2.4)
Description: Very small data compression library
 This library implements the very, very fast LZF compression algorithm written
 in C. Compression ratios are moderate with 40 to 50 percent for typical
 binary data, but decompression speed is basically at unoptimized memcpy
 speed.
Homepage: http://software.schmorp.de/pkg/liblzf.html

Package: liblzma-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 844
Maintainer: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Architecture: amd64
Multi-Arch: same
Source: xz-utils
Version: 5.8.1-1+deb13u2
Depends: liblzma5 (= 5.8.1-1+deb13u2)
Suggests: liblzma-doc
Description: XZ-format compression library - development files
 XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
 compression format, which provides memory-hungry but powerful
 compression (often better than bzip2) and fast, easy decompression.
 .
 The native format of liblzma is XZ; it also supports raw (headerless)
 streams and the older LZMA format used by lzma. (For 7-Zip's related
 format, use the p7zip package instead.) This package provides the
 development library needed to build programs using liblzma.
Homepage: https://tukaani.org/xz/

Package: liblzma5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 435
Maintainer: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Architecture: amd64
Multi-Arch: same
Source: xz-utils
Version: 5.8.1-1+deb13u2
Depends: libc6 (>= 2.34)
Breaks: liblzma2 (<< 5.1.1alpha+20110809-3~)
Description: XZ-format compression library
 XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
 compression format, which provides memory-hungry but powerful
 compression (often better than bzip2) and fast, easy decompression.
 .
 The native format of liblzma is XZ; it also supports raw (headerless)
 streams and the older LZMA format used by lzma. (For 7-Zip's related
 format, use the p7zip package instead.)
Homepage: https://tukaani.org/xz/

Package: liblzo2-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 173
Maintainer: Stephen Kitt <skitt@debian.org>
Architecture: amd64
Multi-Arch: same
Source: lzo2 (2.10-3)
Version: 2.10-3+b1
Depends: libc6 (>= 2.14)
Description: data compression library
 LZO is a portable, lossless data compression library.
 It offers pretty fast compression and very fast decompression.
 Decompression requires no memory.  In addition there are slower
 compression levels achieving a quite competitive compression ratio
 while still decompressing at this very high speed.
Homepage: https://www.oberhumer.com/opensource/lzo/

Package: libmagic-mgc
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 10154
Maintainer: Christoph Biedl <debian.axhn@manchmal.in-ulm.de>
Architecture: amd64
Multi-Arch: foreign
Source: file
Version: 1:5.46-5
Description: File type determination library using "magic" numbers (compiled magic file)
 This package provides the compiled magic file "magic.mgc". It has
 been separated from libmagic1t64 in order to meet the multiarch
 requirements without breaking applications that expect this file
 at its absolute path.
Homepage: https://www.darwinsys.com/file/

Package: libmagic1
Status: deinstall ok config-files
Priority: optional
Section: libs
Installed-Size: 232
Maintainer: Christoph Biedl <debian.axhn@manchmal.in-ulm.de>
Architecture: amd64
Multi-Arch: same
Source: file
Version: 1:5.44-3
Config-Version: 1:5.44-3
Depends: libbz2-1.0, libc6 (>= 2.33), liblzma5 (>= 5.1.1alpha+20120614), zlib1g (>= 1:1.1.4), libmagic-mgc (= 1:5.44-3)
Suggests: file
Conffiles:
 /etc/magic 272913026300e7ae9b5e2d51f138e674 obsolete
 /etc/magic.mime 272913026300e7ae9b5e2d51f138e674 obsolete
Description: Recognize the type of data in a file using "magic" numbers - library
 This library can be used to classify files according to magic number
 tests. It implements the core functionality of the file command.
Homepage: https://www.darwinsys.com/file/

Package: libmagic1t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 244
Maintainer: Christoph Biedl <debian.axhn@manchmal.in-ulm.de>
Architecture: amd64
Multi-Arch: same
Source: file
Version: 1:5.46-5
Replaces: libmagic1
Provides: libmagic1 (= 1:5.46-5)
Depends: libbz2-1.0, libc6 (>= 2.38), liblzma5 (>= 5.1.1alpha+20120614), zlib1g (>= 1:1.1.4), libmagic-mgc (= 1:5.46-5)
Suggests: file
Breaks: libmagic1 (<< 1:5.46-5)
Conffiles:
 /etc/magic 272913026300e7ae9b5e2d51f138e674
 /etc/magic.mime 272913026300e7ae9b5e2d51f138e674
Description: Recognize the type of data in a file using "magic" numbers - library
 This library can be used to classify files according to magic number
 tests. It implements the core functionality of the file command.
Homepage: https://www.darwinsys.com/file/

Package: libmagickcore-6.q16-6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 6645
Maintainer: ImageMagick Packaging Team <pkg-gmagick-im-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: imagemagick
Version: 8:6.9.11.60+dfsg-1.6+deb12u13
Depends: libbz2-1.0, libc6 (>= 2.35), libfftw3-double3 (>= 3.3.10), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.10.1), libgcc-s1 (>= 3.3.1), libgomp1 (>= 6), libheif1 (>= 1.4.0), libjbig0 (>= 2.0), libjpeg62-turbo (>= 1.3.1), liblcms2-2 (>= 2.6), liblqr-1-0 (>= 0.4.0), libltdl7 (>= 2.4.7), liblzma5 (>= 5.1.1alpha+20120614), libopenjp2-7 (>= 2.0.0), libpng16-16 (>= 1.6.2-1), libtiff6 (>= 4.5.0~rc1), libwebp7 (>= 1.2.4), libwebpdemux2 (>= 1.2.4), libwebpmux3 (>= 1.2.4), libx11-6, libxext6, libxml2 (>= 2.7.4), zlib1g (>= 1:1.1.4), imagemagick-6-common (>= 8:6.9.6.2+dfsg-3)
Pre-Depends: dpkg (>= 1.17.6)
Recommends: ghostscript, gsfonts
Suggests: libmagickcore-6.q16-6-extra
Description: low-level image manipulation library -- quantum depth Q16
 The MagickCore API is a low-level interface between the C programming language
 and the ImageMagick image processing libraries and is recommended for
 wizard-level programmers only. Unlike the MagickWand C API which uses only a
 few opaque types and accessors, with MagickCore you almost exclusively access
 the structure members directly.
 .
 This package contains the C libraries needed to run executables that make
 use of MagickCore.
 .
 This version of libmagickcore is compiled for a channel
 depth of 16 bits (Q16).
Homepage: https://www.imagemagick.org/

Package: libmagickcore-6.q16-6-extra
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 401
Maintainer: ImageMagick Packaging Team <pkg-gmagick-im-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: imagemagick
Version: 8:6.9.11.60+dfsg-1.6+deb12u13
Provides: libmagickcore-6.q16-1-extra, libmagickcore-6.q16-2-extra, libmagickcore-6.q16-3-extra, libmagickcore-6.q16-4-extra, libmagickcore-6.q16-5-extra, libmagickcore-extra
Depends: libc6 (>= 2.35), libcairo2 (>= 1.6.0), libdjvulibre21 (>= 3.5.28), libglib2.0-0 (>= 2.12.0), libmagickcore-6.q16-6 (>= 8:6.9.11.24), libmagickwand-6.q16-6 (>= 8:6.9.10.2), libopenexr-3-1-30 (>= 3.1.5), libpango-1.0-0 (>= 1.22.0), libpangocairo-1.0-0 (>= 1.14.0), libwmflite-0.2-7 (>= 0.2.12), libxml2 (>= 2.7.4)
Recommends: libjxr-tools
Suggests: inkscape
Enhances: libmagickcore-6.q16-6
Description: low-level image manipulation library - extra codecs (Q16)
 This package adds support for SVG, WMF, OpenEXR, DjVu and Graphviz to
 MagickCore.
 .
 This version of libmagickcore-extra is compiled for a channel
 depth of 16 bits (Q16).
Homepage: https://www.imagemagick.org/

Package: libmagickcore-7.q16-10
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 7159
Maintainer: ImageMagick Packaging Team <pkg-gmagick-im-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: imagemagick
Version: 8:7.1.1.43+dfsg1-1+deb13u12
Depends: libbz2-1.0, libc6 (>= 2.38), libfftw3-double3 (>= 3.3.10), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.10.1), libgcc-s1 (>= 3.3.1), libgomp1 (>= 6), libheif1 (>= 1.17.0), libjbig0 (>= 2.0), libjpeg62-turbo (>= 1.3.1), liblcms2-2 (>= 2.6), liblqr-1-0 (>= 0.4.0), libltdl7 (>= 2.5.4), liblzma5 (>= 5.1.1alpha+20120614), libopenjp2-7 (>= 2.0.0), libpng16-16t64 (>= 1.6.46), libraw23t64 (>= 0.16.0), libtiff6 (>= 4.5.0~rc1), libwebp7 (>= 1.5.0), libwebpdemux2 (>= 1.5.0), libwebpmux3 (>= 1.5.0), libx11-6, libxext6, libxml2 (>= 2.7.4), zlib1g (>= 1:1.1.4), imagemagick-7-common (>= 8:7.0.0~)
Pre-Depends: dpkg (>= 1.17.6)
Recommends: ghostscript, fonts-urw-base35
Suggests: libmagickcore-7.q16-10-extra
Description: low-level image manipulation library -- quantum depth Q16
 The MagickCore API is a low-level interface between the C programming language
 and the ImageMagick image processing libraries and is recommended for
 wizard-level programmers only. Unlike the MagickWand C API which uses only a
 few opaque types and accessors, with MagickCore you almost exclusively access
 the structure members directly.
 .
 This package contains the C libraries needed to run executables that make
 use of MagickCore.
 .
 This version of libmagickcore is compiled for a channel
 depth of 16 bits (Q16).
Homepage: https://www.imagemagick.org/

Package: libmagickcore-7.q16-10-extra
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 296
Maintainer: ImageMagick Packaging Team <pkg-gmagick-im-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: imagemagick
Version: 8:7.1.1.43+dfsg1-1+deb13u12
Provides: libmagickcore-extra
Depends: libc6 (>= 2.38), libcairo2 (>= 1.6.0), libdjvulibre21 (>= 3.5.28), libglib2.0-0t64 (>= 2.12.0), libmagickcore-7.q16-10 (>= 8:7.1.1.21), libmagickwand-7.q16-10 (>= 8:7.1.1.21), libopenexr-3-1-30 (>= 3.1.13), libpango-1.0-0 (>= 1.22.0), libpangocairo-1.0-0 (>= 1.14.0), libwmflite-0.2-7 (>= 0.2.12), libxml2 (>= 2.7.4)
Recommends: libjxr-tools
Suggests: inkscape
Enhances: libmagickcore-7.q16-10
Description: low-level image manipulation library - extra codecs (Q16)
 This package adds support for SVG, WMF, OpenEXR, DjVu and Graphviz to
 MagickCore.
 .
 This version of libmagickcore-extra is compiled for a channel
 depth of 16 bits (Q16).
Homepage: https://www.imagemagick.org/

Package: libmagickwand-6.q16-6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1389
Maintainer: ImageMagick Packaging Team <pkg-gmagick-im-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: imagemagick
Version: 8:6.9.11.60+dfsg-1.6+deb12u13
Depends: libc6 (>= 2.33), libgcc-s1 (>= 3.3.1), libgomp1 (>= 4.9), libmagickcore-6.q16-6 (>= 8:6.9.11.60+dfsg-1.6+deb12u13), libx11-6, imagemagick-6-common (>= 8:6.9.6.2+dfsg-3)
Pre-Depends: dpkg (>= 1.17.6)
Description: image manipulation library -- quantum depth Q16
 The MagickWand API is the recommended interface between the C programming
 language and the ImageMagick image processing libraries. Unlike the
 MagickCore C API, MagickWand uses only a few opaque types. Accessors are
 available to set or get important wand properties.
 .
 This package contains the C libraries needed to run executables that make
 use of MagickWand.
 .
 This version of libmagickwand is compiled for a channel
 depth of 16 bits (Q16).
Homepage: https://www.imagemagick.org/

Package: libmagickwand-7.q16-10
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1460
Maintainer: ImageMagick Packaging Team <pkg-gmagick-im-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: imagemagick
Version: 8:7.1.1.43+dfsg1-1+deb13u12
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.3.1), libgomp1 (>= 4.9), libmagickcore-7.q16-10 (>= 8:7.1.1.43+dfsg1-1+deb13u12), libx11-6, imagemagick-7-common (>= 8:7.0.0~)
Pre-Depends: dpkg (>= 1.17.6)
Description: image manipulation library -- quantum depth Q16
 The MagickWand API is the recommended interface between the C programming
 language and the ImageMagick image processing libraries. Unlike the
 MagickCore C API, MagickWand uses only a few opaque types. Accessors are
 available to set or get important wand properties.
 .
 This package contains the C libraries needed to run executables that make
 use of MagickWand.
 .
 This version of libmagickwand is compiled for a channel
 depth of 16 bits (Q16).
Homepage: https://www.imagemagick.org/

Package: libmailtools-perl
Status: install ok installed
Priority: optional
Section: mail
Installed-Size: 229
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 2.22-1
Depends: perl:any, libnet-perl, libnet-smtp-ssl-perl, libtest-simple-perl, libtimedate-perl
Description: modules to manipulate email in perl programs
 MailTools is a set of perl modules which provide an easy interface to
 manipulating email in an object-oriented fashion.
 .
  Mail::Address - Parse mail addresses
  Mail::Cap - Parse mailcap files
  Mail::Field - Base class for manipulation of mail header fields
  Mail::Field::AddrList - object representation of e-mail address lists
  Mail::Field::Date - a date header field
  Mail::Field::Generic - implementation for inspecific fields
  Mail::Filter - Filter mail through multiple subroutines
  Mail::Header - manipulate MIME headers
  Mail::Internet - manipulate email messages
  Mail::Mailer - Simple interface to electronic mailing mechanisms
  Mail::Send - Simple electronic mail interface
  Mail::Util - mail utility functions
Homepage: https://metacpan.org/release/MailTools

Package: libmariadb3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 587
Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: mariadb
Version: 1:11.8.6-0+deb13u1
Replaces: libmariadbclient18
Depends: mariadb-common, libc6 (>= 2.34), libssl3t64 (>= 3.0.0), zlib1g (>= 1:1.1.4)
Breaks: libmariadbclient18
Conflicts: mariadb-galera-server-10.0, mariadb-galera-server-5.5, mariadb-server-10.0, mariadb-server-5.1, mariadb-server-5.2, mariadb-server-5.3, mariadb-server-5.5
Description: MariaDB database client library
 MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MariaDB are speed, robustness and
 ease of use.
 .
 This package includes the client library.
Homepage: https://mariadb.org/

Package: libmaxminddb0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 57
Maintainer: Faidon Liambotis <paravoid@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libmaxminddb
Version: 1.12.2-1
Depends: libc6 (>= 2.33)
Suggests: mmdb-bin
Description: IP geolocation database library
 The libmaxminddb library provides a C library for reading MaxMind DB files,
 including the GeoIP2 databases from MaxMind. This is a custom binary format
 designed to facilitate fast lookups of IP addresses while allowing for great
 flexibility in the type of data associated with an address.
 .
 The MaxMind DB format is an open format. The spec is available at
 https://maxmind.github.io/MaxMind-DB/. This spec is licensed under the Creative
 Commons Attribution-ShareAlike 3.0 Unported License.
Homepage: https://maxmind.github.io/libmaxminddb/

Package: libmbedcrypto16
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 776
Maintainer: Debian IoT Maintainers <debian-iot-maintainers@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: same
Source: mbedtls
Version: 3.6.6-0.1~deb13u1
Depends: libc6 (>= 2.25)
Description: lightweight crypto and SSL/TLS library - crypto library
 mbed TLS (formerly known as PolarSSL) is a lean open source crypto library for
 providing SSL and TLS support in your programs. It offers an intuitive API and
 documented header files, so you can actually understand what the code does.
 It features:
  - Symmetric algorithms, like AES, Blowfish, Triple-DES, DES, ARC4, Camellia
    and XTEA
  - Hash algorithms, like SHA-1, SHA-2, RIPEMD-160 and MD5
  - Entropy pool and random generators, like CTR-DRBG and HMAC-DRBG
  - Public key algorithms, like RSA, Elliptic Curves, Diffie-Hellman, ECDSA
    and ECDH
  - TLS 1.0, 1.1 and 1.2
  - Abstraction layers for ciphers, hashes, public key operations, platform
    abstraction and threading
 .
 This package contains the shared library handling cryptography.
Homepage: https://www.trustedfirmware.org/projects/mbed-tls/

Package: libmbedcrypto7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 615
Maintainer: Andrea Pappacoda <andrea@pappacoda.it>
Architecture: amd64
Multi-Arch: same
Source: mbedtls
Version: 2.28.3-1
Depends: libc6 (>= 2.14)
Description: lightweight crypto and SSL/TLS library - crypto library
 mbed TLS (formerly known as PolarSSL) is a lean open source crypto library for
 providing SSL and TLS support in your programs. It offers an intuitive API and
 documented header files, so you can actually understand what the code does.
 It features:
  - Symmetric algorithms, like AES, Blowfish, Triple-DES, DES, ARC4, Camellia
    and XTEA
  - Hash algorithms, like SHA-1, SHA-2, RIPEMD-160 and MD5
  - Entropy pool and random generators, like CTR-DRBG and HMAC-DRBG
  - Public key algorithms, like RSA, Elliptic Curves, Diffie-Hellman, ECDSA
    and ECDH
  - TLS 1.0, 1.1 and 1.2
  - Abstraction layers for ciphers, hashes, public key operations, platform
    abstraction and threading
 .
 This package contains the shared library handling cryptography.
Homepage: https://www.trustedfirmware.org/projects/mbed-tls/

Package: libmd0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 94
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libmd (1.1.0-2)
Version: 1.1.0-2+b1
Depends: libc6 (>= 2.33)
Description: message digest functions from BSD systems - shared library
 The libmd library provides various message digest ("hash") functions,
 as found on various BSDs on a library with the same name and with a
 compatible API.
Homepage: https://www.hadrons.org/software/libmd/

Package: libmfx1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 27346
Maintainer: Timo Aaltonen <tjaalton@debian.org>
Architecture: amd64
Multi-Arch: same
Source: intel-mediasdk
Version: 22.5.4-1
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libstdc++6 (>= 12), libva2 (>= 2.9.0)
Description: Intel Media SDK -- shared library
 Intel® Media SDK provides an API to access hardware-accelerated video decode,
 encode and filtering on Intel® platforms with integrated graphics.
 .
 Supported video encoders: HEVC, AVC, MPEG-2, JPEG
 Supported Video decoders: HEVC, AVC, VP8, MPEG-2, VC1, JPEG
 Supported video pre-processing filters: Color Conversion, Deinterlace, Denoise,
 Resize, Rotate, Composition
 .
 This package contains the shared library.
Homepage: https://github.com/Intel-Media-SDK/MediaSDK

Package: libmime-charset-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 96
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.013.1-2
Depends: perl:any
Suggests: libencode-eucjpascii-perl, libencode-hanextra-perl, libpod2-base-perl
Description: module for MIME character set information
 MIME::Charset provides information about character sets specified in the MIME
 (Multipurpose Internet Mail Extensions) format. It is often used to describe
 character set and encoding information for messages on the Internet.
 .
 This module allows one to work with character sets and encodings, providing
 a simple facility for converting between them.
Homepage: https://metacpan.org/release/MIME-Charset

Package: libmnl0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 45
Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libmnl
Version: 1.0.5-3
Depends: libc6 (>= 2.14)
Description: minimalistic Netlink communication library
 libmnl is a minimalistic user-space library oriented to Netlink developers.
 There are a lot of common tasks in parsing, validating, constructing of
 both the Netlink header and TLVs that are repetitive and easy to get wrong.
 This library aims to provide simple helpers that allows you to re-use code
 and to avoid re-inventing the wheel.
 .
 The main features of this library are:
 .
 Small: the shared library requires around 30KB for an x86-based computer.
 .
 Simple: this library avoids complexity and elaborated abstractions that
 tend to hide Netlink details.
 .
 Easy to use: the library simplifies the work for Netlink-wise developers.
 It provides functions to make socket handling, message building,
 validating, parsing and sequence tracking, easier.
 .
 Easy to re-use: you can use the library to build your own abstraction
 layer on top of this library.
 .
 Decoupling: the interdependency of the main bricks that compose the
 library is reduced, i.e. the library provides many helpers, but the
 programmer is not forced to use them.
 .
 This package contains the shared libraries needed to run programs that use
 the minimalistic Netlink communication library.
Homepage: https://netfilter.org/projects/libmnl/

Package: libmount1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 565
Maintainer: Chris Hofstaedtler <zeha@debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.41.5-0+deb13u1
Depends: libblkid1 (= 2.41.5-0+deb13u1), libc6 (>= 2.38), libselinux1 (>= 3.1~)
Suggests: cryptsetup-bin
Description: device mounting library
 This device mounting library is used by mount and umount helpers.
Homepage: https://github.com/util-linux/util-linux

Package: libmp3lame0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 548
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: lame (3.100-6)
Version: 3.100-6+b3
Depends: libc6 (>= 2.38)
Description: MP3 encoding library
 LAME (recursive acronym for "LAME Ain't an MP3 Encoder") is a research
 project for learning about and improving MP3 encoding technology.
 LAME includes an MP3 encoding library, a simple frontend application,
 and other tools for sound analysis, as well as convenience tools.
 .
 This package contains the shared library.
Homepage: https://lame.sourceforge.io/

Package: libmpc3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 154
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: mpclib3 (1.3.1-1)
Version: 1.3.1-1+b3
Depends: libc6 (>= 2.4), libgmp10 (>= 2:6.3.0+dfsg), libmpfr6 (>= 4.0.0)
Description: multiple precision complex floating-point library
 MPC is a portable library written in C for arbitrary precision
 arithmetic on complex numbers providing correct rounding. For the time
 being, it contains all arithmetic operations over complex numbers, the
 exponential and the logarithm functions, the trigonometric and
 hyperbolic functions.
 .
 Ultimately, it should implement a multiprecision equivalent of the ISO
 C99 standard.
 .
 It builds upon the GNU MP and the MPFR libraries.
Homepage: http://www.multiprecision.org/mpc/

Package: libmpfr6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1225
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: mpfr4
Version: 4.2.2-1
Depends: libc6 (>= 2.14), libgmp10 (>= 2:6.3.0+dfsg)
Breaks: libcgal13 (<< 4.11-2+b1), libflint-2.5.2 (<< 2.5.2-17+b2), libgiac0 (<< 1.2.3.57+dfsg1-2+b4), libgmp3 (<< 4.1.4-3), libmpc3 (<< 1.1.0-1~), libnormaliz3 (<< 3.5.1+ds-4), sagemath (<< 8.1-2+b2)
Description: multiple precision floating-point computation
 MPFR provides a library for multiple-precision floating-point computation
 with correct rounding.  The computation is both efficient and has a
 well-defined semantics. It copies the good ideas from the
 ANSI/IEEE-754 standard for double-precision floating-point arithmetic
 (53-bit mantissa).
Homepage: https://www.mpfr.org/

Package: libmpg123-0t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 397
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: mpg123
Version: 1.32.10-1+deb13u1
Replaces: libmpg123-0
Provides: libmpg123-0 (= 1.32.10-1+deb13u1)
Depends: libc6 (>= 2.33)
Breaks: libmpg123-0 (<< 1.32.10-1+deb13u1)
Description: MPEG layer 1/2/3 audio decoder (shared library)
 mpg123 is a real time MPEG 1.0/2.0/2.5 audio player/decoder for layers
 1, 2 and 3 (MPEG 1.0 layer 3 also known as MP3).
 .
 This package contains the C libraries needed to run executables that use
 the mpg123 library.
Homepage: http://mpg123.org/

Package: libmspack0t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 113
Maintainer: Marc Dequènes (Duck) <Duck@DuckCorp.org>
Architecture: amd64
Multi-Arch: same
Source: libmspack (0.11-1.1)
Version: 0.11-1.1+b1
Replaces: libmspack0
Provides: libmspack0 (= 0.11-1.1+b1)
Depends: libc6 (>= 2.14)
Breaks: libmspack0 (<< 0.11-1.1)
Description: library for Microsoft compression formats (shared library)
 The purpose of libmspack is to provide both compression and decompression of
 some loosely related file formats used by Microsoft. The intention is to
 support all of the following formats: COMPRESS.EXE [SZDD],
 Microsoft Help (.HLP), COMPRESS.EXE [KWAJ], Microsoft Cabinet (.CAB),
 HTML Help (.CHM), Microsoft eBook (.LIT), Windows Imaging Format (.WIM),
 Exchange Offline Address Book (.LZX).
Homepage: https://www.cabextract.org.uk/libmspack/

Package: libmysofa1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1267
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libmysofa
Version: 1.3.3+dfsg-1
Depends: libc6 (>= 2.38), zlib1g (>= 1:1.1.4)
Description: library to read HRTFs stored in the AES69-2015 SOFA format
 libmysofa is a light weight C-library intended to read SOFA (Spatially Oriented
 Format for Acoustics) files for spatial rendering.
 It hardly has any library dependencies and is suitable for embedded devices.
 .
 It reads SOFA files and checks whether the data complies to the
 "SimpleFreeFieldHRIR" conventions. In addition, it provides functions to
 look-up and interpolate the filters for a given orientation and to normalize
 the HRTFs (Head-Related Transfer Functions) to a reference level.
 .
 This package contains the shared objects necessary to run an application using
 libmysofa.
Homepage: https://github.com/hoene/libmysofa

Package: libncurses6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 342
Maintainer: Ncurses Maintainers <ncurses@packages.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.5+20250216-2
Depends: libtinfo6 (= 6.5+20250216-2), libc6 (>= 2.34)
Recommends: libgpm2
Breaks: cowdancer (<< 0.89~)
Description: shared libraries for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncurses.
Homepage: https://invisible-island.net/ncurses/

Package: libncursesw6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 419
Maintainer: Ncurses Maintainers <ncurses@packages.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.5+20250216-2
Depends: libtinfo6 (= 6.5+20250216-2), libc6 (>= 2.34)
Recommends: libgpm2
Description: shared libraries for terminal handling (wide character support)
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncursesw, which includes support for wide characters.
Homepage: https://invisible-island.net/ncurses/

Package: libnet-dbus-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 597
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: libnet-dbus-perl (1.2.0-2)
Version: 1.2.0-2+b3
Depends: perl (>= 5.40.0-6), perlapi-5.40.0, libc6 (>= 2.4), libdbus-1-3 (>= 1.9.14), libxml-twig-perl
Description: Perl extension for the DBus bindings
 Net::DBus provides a Perl API for the DBus message system. The DBus Perl
 interface is currently operating against the 0.32 development version of
 DBus, but should work with later versions too, providing the API changes have
 not been too drastic.
 .
 Users of this package are either typically, service providers in which case
 the Net::DBus::Service and Net::DBus::Object modules are of most relevance,
 or are client consumers, in which case Net::DBus::RemoteService and
 Net::DBus::RemoteObject are of most relevance.
Homepage: https://metacpan.org/release/Net-DBus

Package: libnet-http-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 61
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 6.23-1
Depends: perl:any, libio-socket-ip-perl, liburi-perl
Recommends: libio-socket-ssl-perl
Description: module providing low-level HTTP connection client
 The Net::HTTP class is a low-level HTTP client.  An instance of the
 Net::HTTP class represents a connection to an HTTP server.  The
 HTTP protocol is described in RFC 2616.  The Net::HTTP class
 supports HTTP/1.0 and HTTP/1.1. Net::HTTP is a sub-class of IO::Socket::INET.
 You can mix its methods with reading and writing from the socket directly.
 This is not necessarily a good idea, unless you know what you are doing.
Homepage: https://metacpan.org/release/Net-HTTP

Package: libnet-smtp-ssl-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 20
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 1.04-2
Depends: libio-socket-ssl-perl, perl:any
Recommends: libauthen-sasl-perl
Description: Perl module providing SSL support to Net::SMTP
 Net::SMTP::SSL implements the same API as Net::SMTP, but uses IO::Socket::SSL
 for its network operations. Due to the nature of Net::SMTP's new method, it is
 not overridden to make use of a default port for the SMTPS service. Perhaps
 future versions will be smart like that. Port 465 is usually what you want,
 and it's not a pain to specify that.
 .
 This package is deprecated. Net::SMTP (in perl core) has support for SMTP
 over SSL, and also for STARTTLS, since version 1.28 (included in Perl 5.22).
Homepage: https://metacpan.org/release/Net-SMTP-SSL

Package: libnet-ssleay-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 1363
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Version: 1.94-3
Depends: perl (>= 5.40.1-2), perl-openssl-abi-3, perlapi-5.40.1, libc6 (>= 2.14), libssl3t64 (>= 3.2.0)
Description: Perl module for Secure Sockets Layer (SSL)
 Net::SSLeay is a perl module that allows you to call Secure Sockets Layer
 (SSL) functions of the SSLeay library directly from your perl scripts. It
 is useful if you want to program robots that access secure web servers or
 if you want to build your own applications over SSL encrypted tunnels. If
 you just want to view web pages on https servers, you do not need this -
 your web browser already knows to do that.
Homepage: https://metacpan.org/release/Net-SSLeay

Package: libnetfilter-conntrack3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 144
Maintainer: Debian Netfilter Packaging Team <team+pkg-netfilter-team@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libnetfilter-conntrack
Version: 1.1.0-1
Depends: libc6 (>= 2.14), libmnl0 (>= 1.0.3-4~), libnfnetlink0 (>= 1.0.2)
Description: Netfilter netlink-conntrack library
 libnetfilter_conntrack is a userspace library providing a programming
 interface (API) to the in-kernel connection tracking state table.
Homepage: https://www.netfilter.org/projects/libnetfilter_conntrack/

Package: libnetpbm11t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 433
Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: netpbm-free
Version: 2:11.10.02-1
Replaces: libnetpbm11
Provides: libnetpbm11 (= 2:11.10.02-1)
Depends: libc6 (>= 2.38)
Breaks: libnetpbm11 (<< 2:11.10.02-1)
Description: Graphics conversion tools shared libraries
 Netpbm is a toolkit for manipulation of graphic images, including
 conversion of images between a variety of different formats. There
 are over 220 separate tools in the package including converters for
 more than 80 graphics formats.
 .
 This package contains the shared libraries used by netpbm.
Homepage: https://netpbm.sourceforge.net/

Package: libnetplan0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 309
Maintainer: Debian netplan Maintainers <team+netplan@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: netplan.io
Version: 0.106-2+deb12u1
Depends: libc6 (>= 2.33), libglib2.0-0 (>= 2.70.0), libuuid1 (>= 2.16), libyaml-0-2
Description: YAML network configuration abstraction runtime library
 netplan reads YAML network configuration files which are written
 by administrators, installers, cloud image instantiations, or other OS
 deployments. During early boot it then generates backend specific
 configuration files in /run to hand off control of devices to a particular
 networking daemon.
 .
 Currently supported backends are networkd and NetworkManager.
 .
 This package contains the necessary runtime library files.
Homepage: https://netplan.io/

Package: libnetplan1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 381
Maintainer: Debian Networking Team <team+networking@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: netplan.io
Version: 1.1.2-7
Depends: libc6 (>= 2.38), libglib2.0-0t64 (>= 2.76.0), libuuid1 (>= 2.16), libyaml-0-2
Description: Declarative network configuration runtime library
 Netplan reads YAML network configuration files which are written
 by administrators, installers, cloud image instantiations, or other OS
 deployments. During early boot it then generates backend specific
 configuration files in /run to hand off control of devices to a particular
 networking daemon.
 .
 Currently supported backends are networkd and NetworkManager.
 .
 This package contains the necessary runtime library files.
Homepage: https://netplan.io/

Package: libnettle8t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 560
Maintainer: Magnus Holmgren <holmgren@debian.org>
Architecture: amd64
Multi-Arch: same
Source: nettle
Version: 3.10.1-1
Replaces: libnettle8
Provides: libnettle8 (= 3.10.1-1)
Depends: libc6 (>= 2.17)
Breaks: libnettle8 (<< 3.10.1-1)
Description: low level cryptographic library (symmetric and one-way cryptos)
 Nettle is a cryptographic library that is designed to fit easily in more or
 less any context: In crypto toolkits for object-oriented languages (C++,
 Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel
 space.
 .
 It tries to solve a problem of providing a common set of cryptographic
 algorithms for higher-level applications by implementing a
 context-independent set of cryptographic algorithms. In that light, Nettle
 doesn't do any memory allocation or I/O, it simply provides the
 cryptographic algorithms for the application to use in any environment and
 in any way it needs.
 .
 This package contains the symmetric and one-way cryptographic
 algorithms. To avoid having this package depend on libgmp, the
 asymmetric cryptos reside in a separate library, libhogweed.
Homepage: https://www.lysator.liu.se/~nisse/nettle/

Package: libnewt0.52
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 365
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Architecture: amd64
Multi-Arch: same
Source: newt
Version: 0.52.25-1
Depends: libc6 (>= 2.38), libslang2 (>= 2.2.4)
Recommends: libfribidi0
Description: Not Erik's Windowing Toolkit - text mode windowing with slang
 Newt is a windowing toolkit for text mode built from the slang library.
 It allows color text mode applications to easily use stackable windows,
 push buttons, check boxes, radio buttons, lists, entry fields, labels,
 and displayable text. Scrollbars are supported, and forms may be nested
 to provide extra functionality. This package contains the shared library
 for programs that have been built with newt.
Homepage: https://pagure.io/newt

Package: libnfnetlink0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 51
Maintainer: Debian Netfilter Packaging Team <team+pkg-netfilter-team@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libnfnetlink
Version: 1.0.2-3
Depends: libc6 (>= 2.14)
Description: Netfilter netlink library
 libnfnetlink is the low-level library for netfilter related
 kernel/userspace communication. It provides a generic messaging
 infrastructure for in-kernel netfilter subsystems (such as
 nfnetlink_log, nfnetlink_queue, nfnetlink_conntrack) and their
 respective users and/or management tools in userspace.
Homepage: https://git.netfilter.org/libnfnetlink

Package: libnftables1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1054
Maintainer: Debian Netfilter Packaging Team <team+pkg-netfilter-team@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: nftables
Version: 1.1.3-1
Depends: libc6 (>= 2.38), libgmp10 (>= 2:6.3.0+dfsg), libjansson4 (>= 2.14), libmnl0 (>= 1.0.3-4~), libnftnl11 (>= 1.2.9), libxtables12 (>= 1.6.0+snapshot20161117)
Description: Netfilter nftables high level userspace API library
 This library provides high level semantics to interact with the nftables
 framework by Netfilter project.
 .
 nftables replaces the old popular iptables, ip6tables, arptables and ebtables.
 .
 Netfilter software and nftables in particular are used in applications such
 as Internet connection sharing, firewalls, IP accounting, transparent
 proxying, advanced routing and traffic control.
 .
 A Linux kernel >= 3.13 is required. However, >= 4.14 is recommended.
 .
 This package contains the libnftables library.
Homepage: https://www.netfilter.org/

Package: libnftnl11
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 244
Maintainer: Debian Netfilter Packaging Team <team+pkg-netfilter-team@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libnftnl
Version: 1.2.9-1
Depends: libc6 (>= 2.34), libmnl0 (>= 1.0.3-4~)
Description: Netfilter nftables userspace API library
 libnftnl is the low-level library for Netfilter 4th generation
 framework nftables.
 .
 Is the user-space library for low-level interaction with
 nftables Netlink's API over libmnl.
Homepage: https://git.netfilter.org/libnftnl

Package: libnghttp2-14
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 229
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: amd64
Multi-Arch: same
Source: nghttp2
Version: 1.64.0-1.1+deb13u1
Depends: libc6 (>= 2.17)
Description: library implementing HTTP/2 protocol (shared library)
 This is an implementation of the Hypertext Transfer Protocol version
 2 in C. The framing layer of HTTP/2 is implemented as a reusable C
 library.
 .
 This package installs a shared library.
Homepage: https://nghttp2.org/

Package: libnghttp3-9
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 201
Maintainer: Debian Curl Maintainers <team+curl@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: nghttp3
Version: 1.8.0-1
Depends: libc6 (>= 2.14)
Description: HTTP/3 library with QUIC and QPACK (library)
 nghttp3 implements HTTP/3 functions in C. For now it supports several
 HTTP actions like request, response and server push.
 .
 This package contains the shared library.
Homepage: https://github.com/ngtcp2/nghttp3

Package: libngtcp2-16
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 335
Maintainer: Debian Curl Maintainers <team+curl@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ngtcp2
Version: 1.11.0-1+deb13u1
Depends: libc6 (>= 2.25)
Description: implementation of QUIC protocol (library)
 ngtcp2 project is an effort to implement QUIC protocol which is
 now being discussed in IETF QUICWG for its standardization.
 .
 This package contains the shared library.
Homepage: https://github.com/ngtcp2/ngtcp2

Package: libngtcp2-crypto-gnutls8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 80
Maintainer: Debian Curl Maintainers <team+curl@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ngtcp2
Version: 1.11.0-1+deb13u1
Depends: libc6 (>= 2.14), libgnutls30t64 (>= 3.8.2), libngtcp2-16 (>= 1.1.0)
Description: implementation of QUIC protocol (library)
 ngtcp2 project is an effort to implement QUIC protocol which is
 now being discussed in IETF QUICWG for its standardization.
 .
 This package contains the shared library.
Homepage: https://github.com/ngtcp2/ngtcp2

Package: libnl-3-200
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 180
Maintainer: Heiko Stuebner <mmind@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libnl3
Version: 3.7.0-2
Depends: libc6 (>= 2.38)
Conffiles:
 /etc/libnl-3/classid 3e07259e58674631830b152e983ca995
 /etc/libnl-3/pktloc 7613dbc41b2dc3258195b6b6abd0f179
Description: library for dealing with netlink sockets
 This is a library for applications dealing with netlink sockets.
 The library provides an interface for raw netlink messaging and various
 netlink family specific interfaces.
Homepage: https://github.com/thom311/libnl

Package: libnl-genl-3-200
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 53
Maintainer: Heiko Stuebner <mmind@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libnl3
Version: 3.7.0-2
Depends: libnl-3-200 (= 3.7.0-2), libc6 (>= 2.4)
Description: library for dealing with netlink sockets - generic netlink
 This is a library for applications dealing with netlink sockets.
 The library provides an interface for raw netlink messaging and various
 netlink family specific interfaces.
 .
 API to the generic netlink protocol, an extended version of the netlink
 protocol.
Homepage: https://github.com/thom311/libnl

Package: libnm0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1596
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: network-manager
Version: 1.52.1-1
Depends: libc6 (>= 2.34), libglib2.0-0t64 (>= 2.44.0), libgnutls30t64 (>= 3.7.2), libudev1 (>= 183)
Description: GObject-based client library for NetworkManager
 NetworkManager is a system network service that manages your network devices
 and connections, attempting to keep active network connectivity when
 available. It manages ethernet, Wi-Fi, mobile broadband (WWAN), and PPPoE
 devices, and provides VPN integration with a variety of different VPN
 services.
 .
 This package contains a convenience library to ease the access to
 NetworkManager.
Homepage: https://networkmanager.dev/

Package: libnorm1t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 513
Maintainer: Luca Boccassi <bluca@debian.org>
Architecture: amd64
Multi-Arch: same
Source: norm (1.5.9+dfsg-3.1)
Version: 1.5.9+dfsg-3.1+b2
Replaces: libnorm1
Provides: libnorm1 (= 1.5.9+dfsg-3.1+b2)
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.0), libstdc++6 (>= 5)
Breaks: libnorm1 (<< 1.5.9+dfsg-3.1)
Description: NACK-Oriented Reliable Multicast (NORM) library
 The NORM protocol is designed to provide end-to-end reliable transport of
 bulk data objects or streams over generic IP multicast routing and forwarding
 services.
 libnorm provides a shared library and an API to use such protocol.
Homepage: https://www.nrl.navy.mil/itd/ncs/products/norm

Package: libnpth0t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 57
Maintainer: Eric Dorland <eric@debian.org>
Architecture: amd64
Multi-Arch: same
Source: npth
Version: 1.8-3
Replaces: libnpth0
Provides: libnpth0 (= 1.8-3)
Depends: libc6 (>= 2.34)
Breaks: libnpth0 (<< 1.8-3)
Description: replacement for GNU Pth using system threads
 nPth is a non-preemptive threads implementation using an API very
 similar to the one known from GNU Pth. It has been designed as a
 replacement of GNU Pth for non-ancient operating systems. In
 contrast to GNU Pth it is based on the system's standard threads
 implementation. Thus nPth allows the use of libraries which are not
 compatible to GNU Pth.
Homepage: https://www.gnupg.org/

Package: libnsl-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 348
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libnsl (1.3.0-3)
Version: 1.3.0-3+b3
Replaces: libc6-dev (<< 2.31-4)
Depends: libnsl2 (= 1.3.0-3+b3), libtirpc-dev
Breaks: libc6-dev (<< 2.31-4)
Description: libnsl development files
 This package contains the files needed for developing applications that
 use libnsl.
Homepage: https://github.com/thkukuk/libnsl

Package: libnsl2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 132
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libnsl (1.3.0-3)
Version: 1.3.0-3+b3
Depends: libc6 (>= 2.38), libtirpc3t64 (>= 1.0.2)
Description: Public client interface for NIS(YP) and NIS+
 This package contains the libnsl library, which contains the public client
 interface for NIS(YP) and NIS+. This code was formerly part of glibc, but is
 now standalone to be able to link against TI-RPC for IPv6 support.
Homepage: https://github.com/thkukuk/libnsl

Package: libnss-myhostname
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 258
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 257.13-1~deb13u1
Depends: libc6 (>= 2.38), libcap2 (>= 1:2.10)
Description: nss module providing fallback resolution for the current hostname
 This package contains a plugin for the Name Service Switch, providing host
 name resolution for the locally configured system hostname as returned by
 gethostname(2). It returns all locally configured public IP addresses or -- if
 none are configured, the IPv4 address 127.0.0.2 (which is on the local
 loopback) and the IPv6 address ::1 (which is the local host).
 .
 A lot of software relies on that the local host name is resolvable. This
 package provides an alternative to the fragile and error-prone manual editing
 of /etc/hosts.
 .
 Installing this package automatically adds myhostname to /etc/nsswitch.conf.
Homepage: https://systemd.io

Package: libnuma1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 75
Maintainer: Ian Wienand <ianw@debian.org>
Architecture: amd64
Multi-Arch: same
Source: numactl
Version: 2.0.19-1
Depends: libc6 (>= 2.38)
Description: Libraries for controlling NUMA policy
 Library to control specific NUMA (Non-Uniform Memory Architecture)
 scheduling or memory placement policies.
Homepage: https://github.com/numactl/numactl

Package: libnvpair3linux
Status: install ok installed
Priority: optional
Section: contrib/libs
Installed-Size: 196
Maintainer: Debian ZFS on Linux maintainers <pkg-zfsonlinux-devel@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: same
Source: zfs-linux
Version: 2.3.9-0+deb13u1
Replaces: libnvpair1, libnvpair3
Depends: libc6 (>= 2.38), libtirpc3t64 (>= 1.0.2)
Breaks: libnvpair1, libnvpair3
Description: Solaris name-value library for Linux
 This library provides routines for packing and unpacking nv pairs for
 transporting data across process boundaries, transporting between
 kernel and userland, and possibly saving onto disk files.
Homepage: https://zfsonlinux.org/

Package: libogg0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 62
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libogg (1.3.5-3)
Version: 1.3.5-3+b2
Depends: libc6 (>= 2.14)
Description: Ogg bitstream library
 Libogg is a library for manipulating ogg bitstreams.  It handles
 both making ogg bitstreams and getting packets from ogg bitstreams.
Homepage: https://xiph.org/ogg/

Package: libonig5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 677
Maintainer: Jörg Frings-Fürst <debian@jff.email>
Architecture: amd64
Multi-Arch: same
Source: libonig (6.9.9-1)
Version: 6.9.9-1+b1
Depends: libc6 (>= 2.14)
Description: regular expressions library
 Oniguruma is a library for working with regular expressions.
 .
 Different character encoding for every regular expression object can
 be specified.
Homepage: https://github.com/kkos/oniguruma

Package: libopenal-data
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 260
Maintainer: Debian Games Team <pkg-games-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: openal-soft
Version: 1:1.24.2-1
Replaces: libopenal1 (<< 1:1.14-5)
Breaks: libopenal1 (<< 1:1.14-5)
Conffiles:
 /etc/openal/alsoft.conf 1aa44b799c8a38f1dcd66db2ff98a97c
Description: Software implementation of the OpenAL audio API (data files)
 OpenAL, the Open Audio Library, is a joint effort to create an open,
 vendor-neutral, cross-platform API for interactive, primarily spatialized
 audio. OpenAL's primary audience are application developers and desktop
 users that rely on portable standards like OpenGL, for games and other
 multimedia applications.
 .
 This package installs data files used by the OpenAL Soft shared library.
Homepage: https://github.com/kcat/openal-soft

Package: libopenal1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1574
Maintainer: Debian Games Team <pkg-games-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: openal-soft
Version: 1:1.24.2-1
Depends: libopenal-data (= 1:1.24.2-1), libc6 (>= 2.38), libgcc-s1 (>= 4.0), libstdc++6 (>= 14)
Recommends: libasound2t64 (>= 1.0.16), libpulse0 (>= 0.99.1)
Suggests: libportaudio2 (>= 19+svn20101113), libsndio7.0 (>= 1.8.1)
Description: Software implementation of the OpenAL audio API (shared library)
 OpenAL, the Open Audio Library, is a joint effort to create an open,
 vendor-neutral, cross-platform API for interactive, primarily spatialized
 audio. OpenAL's primary audience are application developers and desktop
 users that rely on portable standards like OpenGL, for games and other
 multimedia applications.
 .
 This library is meant as a compatible update/replacement to the OpenAL Sample
 Implementation (the SI). The SI has been unmaintained for quite a while, and
 would require a lot of work to clean up. This is a fork the old Windows version
 to attempt an accelerated ALSA version of an OpenAL implementation.
 .
 OpenAL Soft supports mono, stereo, 4-channel, 5.1, 6.1, and 7.1 output, as
 opposed to the SI's 4-channel max (though it did have some provisions for 6
 channel, this was not 5.1, and was seemingly a "late" addition). OpenAL Soft
 does not support the Vorbis and MP3 extensions, however those were considered
 deprecated even in the SI. It does, though, support some of the newer
 extensions like AL_EXT_FLOAT32 and AL_EXT_MCFORMATS for multi-channel and
 floating-point formats, as well as ALC_EXT_EFX for environmental audio effects,
 and others.
 .
 This package installs the OpenAL Soft shared library.
Homepage: https://github.com/kcat/openal-soft

Package: libopenexr-3-1-30
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 6288
Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: openexr
Version: 3.1.13-2
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libimath-3-1-29t64 (>= 3.1.12), libstdc++6 (>= 14), zlib1g (>= 1:1.2.0)
Description: runtime files for the OpenEXR image library
 OpenEXR is a high dynamic-range (HDR) image file format developed by
 Industrial Light & Magic for use in computer imaging applications.
 .
 OpenEXR's features include:
    * Higher dynamic range and colour precision than existing 8- and
      10-bit image file formats.
    * Support for the "half" 16-bit floating-point pixel format.
    * Multiple lossless image compression algorithms. Some of the
      included codecs can achieve 2:1 lossless compression ratios on
      images with film grain.
    * Extensibility. New compression codecs and image types can easily
      be added by extending the C++ classes included in the OpenEXR
      software distribution. New image attributes (strings, vectors,
      integers, etc.) can be added to OpenEXR image headers without
      affecting backward compatibility with existing OpenEXR
      applications.
 .
 This package contains the following shared library:
    * IlmImf - a library that reads and writes OpenEXR images.
Homepage: https://www.openexr.com

Package: libopenjp2-7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 532
Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: openjpeg2
Version: 2.5.3-2.1~deb13u2
Depends: libc6 (>= 2.34)
Description: JPEG 2000 image compression/decompression library
 OpenJPEG is a library for handling the JPEG 2000 image compression format.
 JPEG 2000 is a wavelet-based image compression standard and permits progressive
 transmission by pixel and resolution accuracy for progressive downloads of an
 encoded image. It supports lossless and lossy compression, supports higher
 compression than JPEG 1991, and has resilience to errors in the image.
 .
 This package contains the runtime files for openjpeg 2.x
Homepage: https://www.openjpeg.org

Package: libopenjp2-7-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 874
Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: openjpeg2
Version: 2.5.3-2.1~deb13u2
Depends: libopenjp2-7 (= 2.5.3-2.1~deb13u2)
Description: development files for OpenJPEG, a JPEG 2000 image library
 OpenJPEG is a library for handling the JPEG 2000 image compression format.
 JPEG 2000 is a wavelet-based image compression standard and permits progressive
 transmission by pixel and resolution accuracy for progressive downloads of an
 encoded image. It supports lossless and lossy compression, supports higher
 compression than JPEG 1991, and has resilience to errors in the image.
 .
 This package contains the development files for openjpeg 2.x
Homepage: https://www.openjpeg.org

Package: libopenmpt0t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2355
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libopenmpt (0.7.13-1)
Version: 0.7.13-1+b1
Replaces: libopenmpt0
Provides: libopenmpt0 (= 0.7.13-1+b1)
Depends: libc6 (>= 2.32), libgcc-s1 (>= 4.0), libmpg123-0t64 (>= 1.28.0), libstdc++6 (>= 13.1), libvorbis0a (>= 1.1.2), libvorbisfile3 (>= 1.1.2), zlib1g (>= 1:1.1.4)
Breaks: libopenmpt0 (<< 0.7.13-1)
Description: module music library based on OpenMPT -- shared library
 libopenmpt is a cross-platform C++ and C library to decode tracked music
 files (modules) into a raw PCM audio stream. It is based on the player code
 of the OpenMPT project, a descendant of the original ModPlug Tracker.
 .
 This package contains the main shared library.
Homepage: https://lib.openmpt.org/libopenmpt/

Package: libopus0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3494
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: opus
Version: 1.5.2-2
Depends: libc6 (>= 2.29)
Suggests: opus-tools
Description: Opus codec runtime library
 The Opus codec is designed for interactive speech and audio transmission over
 the Internet. It is designed by the IETF Codec Working Group and incorporates
 technology from Skype's SILK codec and Xiph.Org's CELT codec.
 .
 It is intended to suit a wide range of interactive audio applications,
 including Voice over IP, videoconferencing, in-game chat, and even remote live
 music performances.  It can scale from low bit-rate narrowband speech to very
 high quality stereo music. The current features are:
 .
  Bit-rates from 6 kb/s 510 kb/s
  Sampling rates from 8 to 48 kHz
  Frame sizes from 2.5 ms to 60 ms
  Support for both constant bit-rate (CBR) and variable bit-rate (VBR)
  Audio bandwidth from narrowband to full-band
  Support for speech and music
  Support for mono and stereo
  Support for up to 255 channels (multistream frames)
  Dynamically adjustable bitrate, audio bandwidth, and frame size
  Good loss robustness and packet loss concealment (PLC)
  Floating point and fixed-point implementation
 .
 This package provides the Opus runtime library.
Homepage: http://www.opus-codec.org

Package: libp11-kit0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1882
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: p11-kit
Version: 0.25.5-3
Depends: libc6 (>= 2.38), libffi8 (>= 3.4)
Description: library for loading and coordinating access to PKCS#11 modules - runtime
 The p11-kit library provides a way to load and enumerate Public-Key
 Cryptography Standard #11 modules, along with a standard configuration
 setup for installing PKCS#11 modules so that they're discoverable. It
 also solves problems with coordinating the use of PKCS#11 by different
 components or libraries living in the same process.
 .
 This package contains the shared library required for applications loading
 and accessing PKCS#11 modules.
Homepage: https://p11-glue.github.io/p11-glue/p11-kit.html

Package: libpam-modules
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 923
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: amd64
Multi-Arch: same
Source: pam
Version: 1.7.0-5
Replaces: libpam-umask, libpam0g-util
Provides: libpam-mkhomedir, libpam-motd, libpam-umask
Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.38), libcrypt1 (>= 1:4.3.0), libdb5.3t64, libpam0g (>= 1.4.1), libselinux1 (>= 3.1~), libsystemd0 (>= 254), debconf (>= 0.5) | debconf-2.0, libpam-modules-bin (= 1.7.0-5)
Conflicts: libpam-mkhomedir, libpam-motd, libpam-umask
Conffiles:
 /etc/security/access.conf 55930ab185d7c100b58da36cd44f1dc5
 /etc/security/faillock.conf 164da8ffb87f3074179bc60b71d0b99f
 /etc/security/group.conf f1e26e8db6f7abd2d697d7dad3422c36
 /etc/security/limits.conf 0b1967ff9042a716ce6b01cb999aa1f5
 /etc/security/namespace.conf 6b3796403421d66db7defc46517711bc
 /etc/security/namespace.init 260eb0c3368ffaaf861e003e27618476
 /etc/security/pam_env.conf 89cc8702173d5cd51abc152ae9f8d6bc
 /etc/security/pwhistory.conf 46472157dab7894436c6ba3ccdfcaca6
 /etc/security/sepermit.conf 3d82df292d497bbeaaf8ebef18cd14f1
 /etc/security/time.conf 06e05c6079e839c8833ac7c3abfde192
Description: Pluggable Authentication Modules for PAM
 This package completes the set of modules for PAM. It includes the
  pam_unix.so module as well as some specialty modules.
Homepage: http://www.linux-pam.org/

Package: libpam-modules-bin
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 206
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: pam
Version: 1.7.0-5
Replaces: libpam-modules (<< 1.5.2-5~)
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.38), libcrypt1 (>= 1:4.3.0), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), libsystemd0 (>= 254)
Description: Pluggable Authentication Modules for PAM - helper binaries
 This package contains helper binaries used by the standard set of PAM
 modules in the libpam-modules package.
Homepage: http://www.linux-pam.org/

Package: libpam-runtime
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1028
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: all
Multi-Arch: foreign
Source: pam
Version: 1.7.0-5
Replaces: libpam-modules (<< 1.7.0), libpam-modules-bin (<< 1.7.0)
Depends: debconf (>= 0.5) | debconf-2.0, debconf (>= 1.5.19) | cdebconf, libpam-modules (>= 1.0.1-6)
Breaks: libpam-modules (<< 1.7.0), libpam-modules-bin (<< 1.7.0)
Conffiles:
 /etc/pam.conf 87fc76f18e98ee7d3848f6b81b3391e5
 /etc/pam.d/other 31aa7f2181889ffb00b87df4126d1701
Description: Runtime support for the PAM library
 Contains configuration files and  directories required for
 authentication  to work on Debian systems.  This package is required
 on almost all installations.
Homepage: http://www.linux-pam.org/

Package: libpam-systemd
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 700
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 257.13-1~deb13u1
Provides: default-logind (= 257.13-1~deb13u1), logind (= 257.13-1~deb13u1)
Depends: libc6 (>= 2.39), libcap2 (>= 1:2.10), libpam0g (>= 0.99.7.1), systemd (= 257.13-1~deb13u1), libpam-runtime, default-dbus-system-bus | dbus-system-bus, systemd-sysv
Recommends: dbus-user-session
Suggests: libcryptsetup12, libidn2-0, libp11-kit0, libtss2-rc0t64
Conflicts: libpam-elogind-compat
Description: system and service manager - PAM module
 This package contains the PAM module which registers user sessions in
 the systemd control group hierarchy for logind.
 .
 If in doubt, do install this package.
 .
 Packages that depend on logind functionality need to depend on libpam-systemd.
Homepage: https://systemd.io

Package: libpam0g
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 194
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: amd64
Multi-Arch: same
Source: pam
Version: 1.7.0-5
Replaces: libpam0g-util, libpam0t64 (<< 1.5.3-5)
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.34), debconf (>= 0.5) | debconf-2.0
Suggests: libpam-doc
Breaks: libpam0t64 (<< 1.5.3-5)
Description: Pluggable Authentication Modules library
 Contains the shared library for Linux-PAM, a library that enables the
 local system administrator to choose how applications authenticate users.
 In other words, without rewriting or recompiling a PAM-aware application,
 it is possible to switch between the authentication mechanism(s) it uses.
 One may entirely upgrade the local authentication system without touching
 the applications themselves.
Homepage: http://www.linux-pam.org/

Package: libpango-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 554
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: pango1.0
Version: 1.56.3-1
Depends: fontconfig (>= 2.15.0), libc6 (>= 2.38), libfribidi0 (>= 1.0.0), libglib2.0-0t64 (>= 2.80.0), libharfbuzz0b (>= 8.4.0), libthai0 (>= 0.1.25)
Description: Layout and rendering of internationalized text
 Pango is a library for layout and rendering of text, with an emphasis
 on internationalization. Pango can be used anywhere that text layout is
 needed. however, most of the work on Pango-1.0 was done using the GTK+
 widget toolkit as a test platform. Pango forms the core of text and
 font handling for GTK+-2.0.
 .
 Pango is designed to be modular; the core Pango layout can be used with
 four different font backends:
  - Core X windowing system fonts
  - Client-side fonts on X using the Xft library
  - Direct rendering of scalable fonts using the FreeType library
  - Native fonts on Microsoft backends
 .
 This package contains the shared libraries.
Homepage: https://www.pango.org/

Package: libpangocairo-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 103
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: pango1.0
Version: 1.56.3-1
Depends: libc6 (>= 2.4), libcairo2 (>= 1.18.0), libfontconfig1 (>= 2.15.0), libglib2.0-0t64 (>= 2.80.0), libharfbuzz0b (>= 8.4.0), libpango-1.0-0 (= 1.56.3-1), libpangoft2-1.0-0 (= 1.56.3-1)
Description: Layout and rendering of internationalized text
 Pango is a library for layout and rendering of text, with an emphasis
 on internationalization. Pango can be used anywhere that text layout is
 needed. however, most of the work on Pango-1.0 was done using the GTK+
 widget toolkit as a test platform. Pango forms the core of text and
 font handling for GTK+-2.0.
 .
 Pango is designed to be modular; the core Pango layout can be used with
 four different font backends:
  - Core X windowing system fonts
  - Client-side fonts on X using the Xft library
  - Direct rendering of scalable fonts using the FreeType library
  - Native fonts on Microsoft backends
 .
 This package contains the shared libraries.
Homepage: https://www.pango.org/

Package: libpangoft2-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 158
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: pango1.0
Version: 1.56.3-1
Depends: libc6 (>= 2.38), libfontconfig1 (>= 2.15.0), libfreetype6 (>= 2.2.1), libglib2.0-0t64 (>= 2.80.0), libharfbuzz0b (>= 8.4.0), libpango-1.0-0 (= 1.56.3-1)
Description: Layout and rendering of internationalized text
 Pango is a library for layout and rendering of text, with an emphasis
 on internationalization. Pango can be used anywhere that text layout is
 needed. however, most of the work on Pango-1.0 was done using the GTK+
 widget toolkit as a test platform. Pango forms the core of text and
 font handling for GTK+-2.0.
 .
 Pango is designed to be modular; the core Pango layout can be used with
 four different font backends:
  - Core X windowing system fonts
  - Client-side fonts on X using the Xft library
  - Direct rendering of scalable fonts using the FreeType library
  - Native fonts on Microsoft backends
 .
 This package contains the shared libraries.
Homepage: https://www.pango.org/

Package: libpaper-utils
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 68
Maintainer: Giuseppe Sacco <eppesuig@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: libpaper (2.2.5-0.3)
Version: 2.2.5-0.3+b2
Depends: libc6 (>= 2.38), libpaper2 (>= 2.2.5), sensible-utils
Description: Paper sizes catalogue (utilities)
 Libpaper supports paper size configuration and automates recognition of
 many different paper sizes for programs that need to deal with paper.
 .
 This package contains the command-line utilities, which can also be used as
 a convenient interface for programs written in languages that cannot
 conveniently use the shared library.
Built-Using: gnulib (= 20250303-1), libiberty (= 20250315-1)
Homepage: https://github.com/rrthomas/libpaper

Package: libpaper1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 56
Maintainer: Giuseppe Sacco <eppesuig@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libpaper
Version: 1.1.29
Replaces: libpaperg (<< 1.1.9)
Provides: libpaperg
Depends: libc6 (>= 2.33), debconf (>= 0.5) | debconf-2.0, ucf (>= 0.28), dpkg (>= 1.17.2)
Recommends: libpaper-utils
Description: library for handling paper characteristics
 The libpaper paper-handling library automates recognition of many
 different paper types and sizes for programs that need to deal with
 printed output.

Package: libpaper2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 70
Maintainer: Giuseppe Sacco <eppesuig@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libpaper (2.2.5-0.3)
Version: 2.2.5-0.3+b2
Provides: libpaperg
Depends: libc6 (>= 2.14), debconf (>= 0.5) | debconf-2.0
Recommends: libpaper-utils
Conffiles:
 /etc/paperspecs 45a157b7a0f2d644bb22e4888bc867dc
Description: Paper sizes catalogue
 Libpaper supports paper size configuration and automates recognition of
 many different paper sizes for programs that need to deal with paper.
 .
 This package contains the shared libraries.
Homepage: https://github.com/rrthomas/libpaper

Package: libparted2t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 545
Maintainer: Parted Maintainer Team <parted-maintainers@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: same
Source: parted
Version: 3.6-5
Replaces: libparted2
Provides: libparted, libparted2 (= 3.6-5)
Depends: dmidecode, libblkid1 (>= 2.17.2), libc6 (>= 2.38), libdevmapper1.02.1 (>= 2:1.02.197), libuuid1 (>= 2.16)
Suggests: libparted-dev, libparted-i18n (= 3.6-5), parted
Conflicts: libparted2 (<< 3.6-5)
Description: disk partition manipulator - shared library
 GNU Parted is a program that allows you to create, destroy, resize,
 move, and copy disk partitions. This is useful for creating space
 for new operating systems, reorganizing disk usage, and copying data
 to new hard disks.
 .
 This package contains the shared library.
Homepage: https://www.gnu.org/software/parted

Package: libpcap0.8t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 390
Maintainer: Debian Security Tools <team+pkg-security@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libpcap
Version: 1.10.5-2
Replaces: libpcap0.8, libpcap0.8-dev (<< 1.10.4-3)
Provides: libpcap0.8 (= 1.10.5-2)
Depends: libc6 (>= 2.38), libdbus-1-3 (>= 1.10)
Breaks: libpcap0.8 (<< 1.10.5-2)
Description: system interface for user-level packet capture
 libpcap (Packet CAPture) provides a portable framework for low-level
 network monitoring.  Applications include network statistics collection,
 security monitoring, network debugging, etc.
 .
 Since almost every system vendor provides a different interface for
 packet capture, and since there are several tools that require this
 functionality, the libpcap authors created this system-independent API
 to ease in porting and to alleviate the need for several
 system-dependent packet capture modules in each application.
Homepage: https://www.tcpdump.org/

Package: libpci3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 143
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: amd64
Multi-Arch: same
Source: pciutils
Version: 1:3.13.0-2
Depends: libc6 (>= 2.38), libudev1 (>= 196), zlib1g (>= 1:1.1.4), pci.ids (>= 0.0~2019.11.10-2)
Description: PCI utilities (shared library)
 This package contains the libpci shared library files.
 .
 The libpci library provides portable access to configuration
 registers of devices connected to the PCI bus.
Homepage: https://mj.ucw.cz/sw/pciutils/

Package: libpciaccess0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 97
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libpciaccess (0.17-3)
Version: 0.17-3+b3
Depends: libc6 (>= 2.38), zlib1g (>= 1:1.1.4)
Suggests: pciutils
Description: Generic PCI access library for X
 Provides functionality for X to access the PCI bus and devices
 in a platform-independent way.

Package: libpcre2-8-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 774
Maintainer: Matthew Vernon <matthew@debian.org>
Architecture: amd64
Multi-Arch: same
Source: pcre2
Version: 10.46-1~deb13u3
Depends: libc6 (>= 2.34)
Description: New Perl Compatible Regular Expression Library- 8 bit runtime files
 This is PCRE2, the new implementation of PCRE, a library of functions
 to support regular expressions whose syntax and semantics are as
 close as possible to those of the Perl 5 language. New projects
 should use this library in preference to the older library,
 confusingly called pcre3 in Debian.
 .
 This package contains the 8 bit runtime library, which operates on
 ASCII and UTF-8 input.
Homepage: https://github.com/PCRE2Project/pcre2

Package: libpcre2-posix3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 90
Maintainer: Matthew Vernon <matthew@debian.org>
Architecture: amd64
Multi-Arch: same
Source: pcre2
Version: 10.46-1~deb13u3
Replaces: libpcre2-posix0
Depends: libc6 (>= 2.4), libpcre2-8-0 (>= 10.22)
Conflicts: libpcre2-posix0
Description: New Perl Compatible Regular Expression Library - posix-compatible runtime files
 This is PCRE2, the new implementation of PCRE, a library of functions
 to support regular expressions whose syntax and semantics are as
 close as possible to those of the Perl 5 language. New projects
 should use this library in preference to the older library,
 confusingly called pcre3 in Debian.
 .
 This package contains the runtime library for the posix-compatible API.
Homepage: https://github.com/PCRE2Project/pcre2

Package: libpcre3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 680
Maintainer: Matthew Vernon <matthew@debian.org>
Architecture: amd64
Multi-Arch: same
Source: pcre3
Version: 2:8.39-15
Depends: libc6 (>= 2.34)
Breaks: approx (<< 4.4-1~), cduce (<< 0.5.3-2~), cmigrep (<< 1.5-7~), galax (<< 1.1-7~), libpcre-ocaml (<< 6.0.1~), liquidsoap (<< 0.9.2-3~), ocsigen (<< 1.3.3-1~)
Conflicts: libpcre3-dev (<= 4.3-3)
Description: Old Perl 5 Compatible Regular Expression Library - runtime files
 This is a library of functions to support regular expressions whose syntax
 and semantics are as close as possible to those of the Perl 5 language.
 .
 New packages should use the newer pcre2 packages, and existing
 packages should migrate to pcre2.
 .
 This package contains the runtime libraries.

Package: libperl5.36
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 28875
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: amd64
Multi-Arch: same
Source: perl
Version: 5.36.0-7+deb12u4
Replaces: libarchive-tar-perl (<= 1.38-2), libcompress-raw-bzip2-perl (<< 2.103), libcompress-raw-zlib-perl (<< 2.105), libcompress-zlib-perl (<< 2.106), libdigest-md5-perl (<< 2.58), libdigest-sha-perl (<< 6.02), libencode-perl (<< 3.17), libio-compress-base-perl (<< 2.106), libio-compress-bzip2-perl (<< 2.106), libio-compress-perl (<< 2.106), libio-compress-zlib-perl (<< 2.106), libmime-base64-perl (<< 3.16), libmodule-corelist-perl (<< 2.14-2), libstorable-perl (<< 3.26), libsys-syslog-perl (<< 0.36), libthreads-perl (<< 2.27), libthreads-shared-perl (<< 1.64), libtime-hires-perl (<< 1.9770), libtime-piece-perl (<< 1.3401), perl (<< 5.22.0~), perl-base (<< 5.22.0~)
Depends: libbz2-1.0, libc6 (>= 2.35), libcrypt1 (>= 1:4.1.0), libdb5.3, libgdbm-compat4 (>= 1.18-3), libgdbm6 (>= 1.21), zlib1g (>= 1:1.2.2.3), perl-modules-5.36 (>= 5.36.0-7+deb12u4)
Suggests: sensible-utils
Breaks: libcompress-raw-bzip2-perl (<< 2.103), libcompress-raw-zlib-perl (<< 2.105), libcompress-zlib-perl (<< 2.106), libdigest-md5-perl (<< 2.58), libdigest-sha-perl (<< 6.02), libencode-perl (<< 3.17), libfilter-perl (<< 1.60), libio-compress-base-perl (<< 2.106), libio-compress-bzip2-perl (<< 2.106), libio-compress-perl (<< 2.106), libio-compress-zlib-perl (<< 2.106), libmime-base64-perl (<< 3.16), libstorable-perl (<< 3.26), libsys-syslog-perl (<< 0.36), libthreads-perl (<< 2.27), libthreads-shared-perl (<< 1.64), libtime-hires-perl (<< 1.9770), libtime-piece-perl (<< 1.3401)
Description: shared Perl library
 This package contains the shared Perl library, used by applications
 which embed a Perl interpreter.
 .
 It also contains the architecture-dependent parts of the standard
 library (and depends on perl-modules-5.36 which contains the
 architecture-independent parts).
Homepage: http://dev.perl.org/perl5/

Package: libperl5.40
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 29322
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: amd64
Multi-Arch: same
Source: perl
Version: 5.40.1-6+deb13u1
Replaces: libarchive-tar-perl (<= 1.38-2), libcompress-raw-bzip2-perl (<< 2.212), libcompress-raw-zlib-perl (<< 2.212), libcompress-zlib-perl (<< 2.212), libdigest-md5-perl (<< 2.58.01), libdigest-sha-perl (<< 6.04), libencode-perl (<< 3.21), libio-compress-base-perl (<< 2.212), libio-compress-bzip2-perl (<< 2.212), libio-compress-perl (<< 2.212), libio-compress-zlib-perl (<< 2.212), libmime-base64-perl (<< 3.16.01), libmodule-corelist-perl (<< 2.14-2), libstorable-perl (<< 3.32), libsys-syslog-perl (<< 0.36), libthreads-perl (<< 2.40), libthreads-shared-perl (<< 1.69), libtime-hires-perl (<< 1.9777), libtime-piece-perl (<< 1.3401.01), perl (<< 5.22.0~), perl-base (<< 5.22.0~)
Depends: libbz2-1.0, libc6 (>= 2.38), libcrypt1 (>= 1:4.1.0), libdb5.3t64, libgdbm-compat4t64 (>= 1.18-3), libgdbm6t64 (>= 1.21), zlib1g (>= 1:1.2.3.4), perl-modules-5.40 (>= 5.40.1-6+deb13u1)
Suggests: sensible-utils
Breaks: libcompress-raw-bzip2-perl (<< 2.212), libcompress-raw-zlib-perl (<< 2.212), libcompress-zlib-perl (<< 2.212), libdigest-md5-perl (<< 2.58.01), libdigest-sha-perl (<< 6.04), libencode-perl (<< 3.21), libfilter-perl (<< 1.64), libio-compress-base-perl (<< 2.212), libio-compress-bzip2-perl (<< 2.212), libio-compress-perl (<< 2.212), libio-compress-zlib-perl (<< 2.212), libmime-base64-perl (<< 3.16.01), libstorable-perl (<< 3.32), libsys-syslog-perl (<< 0.36), libthreads-perl (<< 2.40), libthreads-shared-perl (<< 1.69), libtime-hires-perl (<< 1.9777), libtime-piece-perl (<< 1.3401.01)
Description: shared Perl library
 This package contains the shared Perl library, used by applications
 which embed a Perl interpreter.
 .
 It also contains the architecture-dependent parts of the standard
 library (and depends on perl-modules-5.40 which contains the
 architecture-independent parts).
Homepage: https://dev.perl.org/perl5/

Package: libpgm-5.3-0t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 329
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libpgm (5.3.128~dfsg-2.1)
Version: 5.3.128~dfsg-2.1+b1
Replaces: libpgm-5.3-0
Provides: libpgm-5.3-0 (= 5.3.128~dfsg-2.1+b1)
Depends: libc6 (>= 2.34)
Breaks: libpgm-5.3-0 (<< 5.3.128~dfsg-2.1)
Description: OpenPGM shared library
 OpenPGM is an open source implementation of the Pragmatic General Multicast
 (PGM) specification in RFC 3208 available at www.ietf.org. PGM is a reliable
 and scalable multicast protocol that enables receivers to detect loss,
 request retransmission of lost data, or notify an application of
 unrecoverable loss. PGM is a receiver-reliable protocol, which means the
 receiver is responsible for ensuring all data is received, absolving the
 sender of reception responsibility. PGM runs over a best effort datagram
 service, currently OpenPGM uses IP multicast but could be implemented above
 switched fabrics such as InfiniBand.
 .
 This is the runtime package for programs that use the OpenPGM library.
Homepage: https://github.com/steve-o/openpgm

Package: libpipeline1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 101
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libpipeline
Version: 1.5.8-1
Depends: libc6 (>= 2.34)
Description: Unix process pipeline manipulation library
 This is a C library for setting up and running pipelines of processes,
 without needing to involve shell command-line parsing which is often
 error-prone and insecure.
Homepage: https://libpipeline.gitlab.io/libpipeline/

Package: libpixman-1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 715
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: pixman
Version: 0.44.0-3
Depends: libc6 (>= 2.29)
Description: pixel-manipulation library for X and cairo
 A library for manipulating pixel regions -- a set of Y-X banded
 rectangles, image compositing using the Porter/Duff model
 and implicit mask generation for geometric primitives including
 trapezoids, triangles, and rectangles.
Homepage: http://pixman.org/

Package: libpkgconf3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 101
Maintainer: Andrej Shadura <andrewsh@debian.org>
Architecture: amd64
Multi-Arch: same
Source: pkgconf
Version: 1.8.1-4
Depends: libc6 (>= 2.38)
Description: shared library for pkgconf
 pkgconf is an implementation of the pkg-config system, which helps to configure
 compiler and linker flags for development frameworks.
 .
 pkgconf is a replacement for pkg-config, providing additional functionality
 while also maintaining compatibility.
 .
 libpkgconf is a library which provides access to most of pkgconf's
 functionality, to allow other tooling such as compilers and IDEs to
 discover and use libraries configured by pkgconf.
 .
 This package ships a shared library for libpkgconf.
Homepage: http://pkgconf.org/

Package: libplacebo208
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 7716
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libplacebo
Version: 4.208.0-3
Depends: libc6 (>= 2.34), libepoxy0 (>= 1.4.3), libgcc-s1 (>= 3.4), liblcms2-2 (>= 2.6), libstdc++6 (>= 11), libvulkan1 (>= 1.2.131.2)
Description: GPU-accelerated video/image rendering primitives (shared library)
 The library provides useful GPU-accelerated image processing primitives based
 on GLSL. It includes shader routines for decoding and transforming colors,
 tone mapping, dithering, and for various algorithms that sample from images,
 such as debanding and scaling.
 .
 This package contains the shared library.
Homepage: https://code.videolan.org/videolan/libplacebo

Package: libplacebo349
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 9190
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libplacebo
Version: 7.349.0-3
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.4), liblcms2-2 (>= 2.6), libstdc++6 (>= 13.1), libvulkan1 (>= 1.2.131.2)
Description: GPU-accelerated video/image rendering primitives (shared library)
 The library provides useful GPU-accelerated image processing primitives based
 on GLSL. It includes shader routines for decoding and transforming colors,
 tone mapping, dithering, and for various algorithms that sample from images,
 such as debanding and scaling.
 .
 This package contains the shared library.
Homepage: https://code.videolan.org/videolan/libplacebo

Package: libpng-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1054
Maintainer: Maintainers of libpng1.6 packages <libpng1.6@packages.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libpng1.6
Version: 1.6.48-1+deb13u6
Replaces: libpng16-dev (<< 1.6.20-3), libpng16-devtools (<< 1.6.21-1)
Depends: libpng16-16t64 (= 1.6.48-1+deb13u6), zlib1g-dev
Recommends: libpng-tools
Breaks: libpng16-dev (<< 1.6.20-3), libpng16-devtools (<< 1.6.21-1)
Conflicts: libpng12-0-dev, libpng12-dev, libpng2-dev, libpng3-dev
Description: PNG library - development (version 1.6)
 libpng is a library implementing an interface for reading and writing
 PNG (Portable Network Graphics) format files.
 .
 This package contains the header and development files needed to build
 programs and packages using libpng.
Homepage: http://libpng.org/pub/png/libpng.html

Package: libpng-tools
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 195
Maintainer: Maintainers of libpng1.6 packages <libpng1.6@packages.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: libpng1.6
Version: 1.6.48-1+deb13u6
Replaces: libpng16-tools (<< 1.6.21-1)
Depends: libc6 (>= 2.34), libpng16-16t64 (= 1.6.48-1+deb13u6), zlib1g (>= 1:1.2.3.4)
Breaks: libpng16-tools (<< 1.6.21-1)
Description: PNG library - tools (version 1.6)
 libpng is a library implementing an interface for reading and writing
 PNG (Portable Network Graphics) format files.
 .
 This package contains a program to interact with libpng from the
 command line.
Homepage: http://libpng.org/pub/png/libpng.html

Package: libpng16-16t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 444
Maintainer: Maintainers of libpng1.6 packages <libpng1.6@packages.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libpng1.6
Version: 1.6.48-1+deb13u6
Replaces: libpng16-16
Provides: libpng16-16 (= 1.6.48-1+deb13u6)
Depends: libc6 (>= 2.29), zlib1g (>= 1:1.2.3.4)
Breaks: libpng16-16 (<< 1.6.48-1+deb13u6)
Description: PNG library - runtime (version 1.6)
 libpng is a library implementing an interface for reading and writing
 PNG (Portable Network Graphics) format files.
 .
 This package contains the runtime library files needed to run software
 using libpng.
Homepage: http://libpng.org/pub/png/libpng.html

Package: libpocketsphinx3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 318
Maintainer: Debian Accessibility Team <pkg-a11y-devel@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: same
Source: pocketsphinx (0.8+5prealpha+1-15)
Version: 0.8+5prealpha+1-15+b4
Depends: libc6 (>= 2.29), libsphinxbase3t64 (>= 0.8+5prealpha+1)
Recommends: pocketsphinx-en-us
Description: Speech recognition tool - front-end library
 CMU Sphinx is a large vocabulary, speaker-independent continuous speech
 recognition engine.
 .
 This package contains the frontend shared library
Homepage: http://cmusphinx.sourceforge.net/

Package: libpolkit-agent-1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 71
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: policykit-1
Version: 126-2
Depends: libc6 (>= 2.38), libglib2.0-0t64 (>= 2.80.0), libpolkit-gobject-1-0 (= 126-2)
Description: polkit Authentication Agent API
 polkit is a toolkit for defining and handling the policy that
 allows unprivileged processes to speak to privileged processes.
 It was previously named PolicyKit.
 .
 This package contains a library for accessing the authentication agent.
Homepage: https://github.com/polkit-org/polkit/

Package: libpolkit-gobject-1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 158
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: policykit-1
Version: 126-2
Depends: libc6 (>= 2.38), libglib2.0-0t64 (>= 2.80.0), libsystemd0 (>= 213)
Description: polkit Authorization API
 polkit is a toolkit for defining and handling the policy that
 allows unprivileged processes to speak to privileged processes.
 It was previously named PolicyKit.
 .
 This package contains a library for accessing polkit.
Homepage: https://github.com/polkit-org/polkit/

Package: libpopt0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 245
Maintainer: Håvard F. Aasen <havard.f.aasen@pfft.no>
Architecture: amd64
Multi-Arch: same
Source: popt
Version: 1.19+dfsg-2
Depends: libc6 (>= 2.38)
Description: lib for parsing cmdline parameters
 Popt was heavily influenced by the getopt() and getopt_long() functions,
 but it allows more powerful argument expansion. It can parse arbitrary
 argv[] style arrays and automatically set variables based on command
 line arguments. It also allows command line arguments to be aliased via
 configuration files and includes utility functions for parsing arbitrary
 strings into argv[] arrays using shell-like rules.
 .
 This package contains the runtime library and locale data.
Homepage: https://github.com/rpm-software-management/popt

Package: libpostproc56
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 239
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ffmpeg
Version: 7:5.1.9-0+deb12u1
Depends: libavutil57 (>= 7:5.0), libc6 (>= 2.14)
Description: FFmpeg library for post processing - runtime files
 FFmpeg is the leading multimedia framework, able to decode, encode, transcode,
 mux, demux, stream, filter and play pretty much anything that humans and
 machines have created. It supports the most obscure ancient formats up to the
 cutting edge.
 .
 This library provides video post processing.
 .
 This package contains the runtime files.
Homepage: https://ffmpeg.org/

Package: libpostproc58
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 184
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ffmpeg
Version: 7:7.1.5-0+deb13u1
Depends: libavutil59 (>= 7:7.1.5), libc6 (>= 2.14)
Description: FFmpeg library for post processing - runtime files
 FFmpeg is the leading multimedia framework, able to decode, encode, transcode,
 mux, demux, stream, filter and play pretty much anything that humans and
 machines have created. It supports the most obscure ancient formats up to the
 cutting edge.
 .
 This library provides video post processing.
 .
 This package contains the runtime files.
Homepage: https://ffmpeg.org/

Package: libproc2-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 237
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: same
Source: procps
Version: 2:4.0.4-9
Replaces: procps (<< 1:3.3.2-1)
Depends: libc6 (>= 2.38), libsystemd0
Description: library for accessing process information from /proc
 The libproc2 library is a way of accessing information out of the /proc
 filesystem.
 .
 This package contains the shared libraries necessary to run programs
 compiled with libproc2.
Homepage: https://gitlab.com/procps-ng/procps

Package: libprotobuf-c1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 62
Maintainer: Robert Edmonds <edmonds@debian.org>
Architecture: amd64
Multi-Arch: same
Source: protobuf-c
Version: 1.5.1-1
Depends: libc6 (>= 2.14)
Description: Protocol Buffers C shared library (protobuf-c)
 Protocol Buffers are a flexible, efficient, automated mechanism for
 serializing structured data - similar to XML, but smaller, faster, and
 simpler. You define how you want your data to be structured once, then you can
 use special generated source code to easily write and read your structured
 data to and from a variety of data streams and using a variety of languages.
 You can even update your data structure without breaking deployed programs
 that are compiled against the "old" format.
 .
 This is the "protobuf-c" implementation of Protocol Buffers in C.
 .
 This package contains the shared library.
Homepage: https://github.com/protobuf-c/protobuf-c

Package: libpsl5t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 100
Maintainer: Tim Rühsen <tim.ruehsen@gmx.de>
Architecture: amd64
Multi-Arch: same
Source: libpsl (0.21.2-1.1)
Version: 0.21.2-1.1+b1
Replaces: libpsl5
Provides: libpsl5 (= 0.21.2-1.1+b1)
Depends: libidn2-0 (>= 0.16), libc6 (>= 2.33), libunistring5 (>= 1.1)
Recommends: publicsuffix (>= 20150507)
Breaks: libpsl5 (<< 0.21.2-1.1)
Description: Library for Public Suffix List (shared libraries)
 Libpsl allows checking domains against the Public Suffix List.
 It can be used to avoid privacy-leaking 'super-cookies',
 'super domain' certificates, for domain highlighting purposes
 sorting domain lists by site and more.
 .
 Please see https://publicsuffix.org for more detailed information.
 .
 This package contains runtime libraries.
Homepage: https://github.com/rockdaboot/libpsl

Package: libpthread-stubs0-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 17
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libpthread-stubs
Version: 0.5-1
Description: pthread stubs not provided by native libc, development files
 This library provides weak aliases for pthread functions not provided
 in libc or otherwise available by default.  Libraries like libxcb rely
 on pthread stubs to use pthreads optionally, becoming thread-safe when
 linked to libpthread, while avoiding any performance hit when running
 single-threaded. libpthread-stubs supports this behavior even on
 platforms which do not supply all the necessary pthread stubs.
 .
 On platforms which already supply all the necessary pthread stubs, this
 package ships only the pkg-config file pthread-stubs.pc, to allow
 libraries to unconditionally express a dependency on pthread-stubs and
 still obtain correct behavior.

Package: libpulse0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 973
Maintainer: Pulseaudio maintenance team <pkg-pulseaudio-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: pulseaudio (17.0+dfsg1-2)
Version: 17.0+dfsg1-2+b1
Depends: libasyncns0 (>= 0.3), libc6 (>= 2.38), libdbus-1-3 (>= 1.10), libsndfile1 (>= 1.0.20), libsystemd0, libx11-6, libx11-xcb1, libxcb1
Suggests: pulseaudio
Conffiles:
 /etc/pulse/client.conf 16bb1fd7704eae3f0e7dde080b83e197
Description: PulseAudio client libraries
 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 Client libraries used by applications that access a PulseAudio sound server
 via PulseAudio's native interface.
Homepage: http://pulseaudio.org

Package: libpython3-stdlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 28
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: python3-defaults
Version: 3.13.5-1
Depends: libpython3.13-stdlib (>= 3.13.5-1~)
Description: interactive high-level object-oriented language (default python3 version)
 This package contains the majority of the standard library for the Python
 language (default python3 version).
 .
 This package is a dependency package, which depends on Debian's default
 Python 3 version's standard library (currently v3.13).
Homepage: https://www.python.org/

Package: libpython3.11-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 5232
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: python3.11
Version: 3.11.2-6+deb12u9
Depends: libc6 (>= 2.14), libssl3 (>= 3.0.0)
Recommends: libpython3.11-stdlib
Conflicts: binfmt-support (<< 1.1.2)
Conffiles:
 /etc/python3.11/sitecustomize.py d6b276695157bde06a56ba1b2bc53670
Description: Minimal subset of the Python language (version 3.11)
 This package contains some essential modules. It is normally not
 used on it's own, but as a dependency of python3.11-minimal.

Package: libpython3.11-stdlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 8334
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: python3.11
Version: 3.11.2-6+deb12u9
Replaces: python3-gdbm (<< 3.9.9-1~)
Depends: libpython3.11-minimal (= 3.11.2-6+deb12u9), media-types | mime-support, libbz2-1.0, libc6 (>= 2.34), libcrypt1 (>= 1:4.1.0), libdb5.3, libffi8 (>= 3.4), liblzma5 (>= 5.1.1alpha+20120614), libncursesw6 (>= 6.1), libnsl2 (>= 1.0), libreadline8 (>= 7.0~beta), libsqlite3-0 (>= 3.36.0), libtinfo6 (>= 6), libtirpc3 (>= 1.0.2), libuuid1 (>= 2.20.1)
Breaks: python3-gdbm (<< 3.9.9-1~)
Description: Interactive high-level object-oriented language (standard library, version 3.11)
 Python is a high-level, interactive, object-oriented language. Its 3.11 version
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
 .
 This package contains Python 3.11's standard library. It is normally not
 used on its own, but as a dependency of python3.11.

Package: libpython3.13-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 5452
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: python3.13
Version: 3.13.5-2+deb13u5
Replaces: libpython3.13-stdlib (<< 3.13.1-3~)
Depends: libc6 (>= 2.14), libssl3t64 (>= 3.4.0)
Recommends: libpython3.13-stdlib
Breaks: libpython3.13-stdlib (<< 3.13.1-3~)
Conflicts: binfmt-support (<< 1.1.2)
Conffiles:
 /etc/python3.13/sitecustomize.py d6b276695157bde06a56ba1b2bc53670
Description: Minimal subset of the Python language (version 3.13)
 This package contains some essential modules. It is normally not
 used on it's own, but as a dependency of python3.13-minimal.

Package: libpython3.13-stdlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 8898
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: python3.13
Version: 3.13.5-2+deb13u5
Depends: libpython3.13-minimal (= 3.13.5-2+deb13u5), media-types | mime-support, netbase, tzdata, libbz2-1.0, libc6 (>= 2.38), libdb5.3t64, libffi8 (>= 3.4), liblzma5 (>= 5.1.1alpha+20120614), libncursesw6 (>= 6.1), libreadline8t64 (>= 7.0~beta), libsqlite3-0 (>= 3.36.0), libtinfo6 (>= 6), libuuid1 (>= 2.20.1)
Description: Interactive high-level object-oriented language (standard library, version 3.13)
 Python is a high-level, interactive, object-oriented language. Its 3.13 version
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
 .
 This package contains Python 3.13's standard library. It is normally not
 used on its own, but as a dependency of python3.13.

Package: libquadmath0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 296
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-14
Version: 14.2.0-19
Depends: gcc-14-base (= 14.2.0-19), libc6 (>= 2.38)
Description: GCC Quad-Precision Math Library
 A library, which provides quad-precision mathematical functions on targets
 supporting the __float128 datatype. The library is used to provide on such
 targets the REAL(16) type in the GNU Fortran compiler.
Homepage: http://gcc.gnu.org/

Package: librabbitmq4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 119
Maintainer: Florian Ernst <florian@debian.org>
Architecture: amd64
Multi-Arch: same
Source: librabbitmq
Version: 0.15.0-1+deb13u2
Depends: libc6 (>= 2.17), libssl3t64 (>= 3.0.0)
Description: AMQP client library written in C
 RabbitMQ provides robust messaging for applications. It is easy to use, fit
 for purpose at cloud scale and supported on all major operating systems and
 developer platforms. librabbitmq is a C-language AMQP client library for use
 with AMQP servers such as RabbitMQ speaking protocol versions 0-9-1.
 .
 This package includes the library itself.
Homepage: https://github.com/alanxz/rabbitmq-c

Package: librav1e0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2664
Maintainer: Debian Rust Maintainers <pkg-rust-maintainers@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: same
Source: rust-rav1e
Version: 0.5.1-6
Depends: libc6 (>= 2.34), libgcc-s1 (>= 4.2)
Description: Fastest and safest AV1 encoder - shared library
 rav1e is a encoder for the AV1 video codec.
 .
 This package contains the shared library.
Homepage: https://github.com/xiph/rav1e

Package: librav1e0.7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3238
Maintainer: Debian Rust Maintainers <pkg-rust-maintainers@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: same
Source: rust-rav1e (0.7.1-9)
Version: 0.7.1-9+b2
Depends: libc6 (>= 2.34), libgcc-s1 (>= 4.2)
Description: Fastest and safest AV1 encoder - shared library
 rav1e is a encoder for the AV1 video codec.
 .
 This package contains the shared library.
Homepage: https://github.com/xiph/rav1e/

Package: libraw-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 3649
Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libraw
Version: 0.21.4-2+deb13u1
Depends: libraw23t64 (= 0.21.4-2+deb13u1), liblcms2-dev
Description: raw image decoder library (development files)
 LibRaw is a library for reading RAW files obtained from digital photo cameras
 (CRW/CR2, NEF, RAF, DNG, and others).
 .
 This package contains the static library and header files.
Homepage: https://www.libraw.org

Package: libraw1394-11
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 98
Maintainer: Guus Sliepen <guus@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libraw1394 (2.1.2-2)
Version: 2.1.2-2+b2
Depends: libc6 (>= 2.14)
Suggests: libraw1394-doc
Description: library for direct access to IEEE 1394 bus (aka FireWire)
 libraw1394 is the only supported interface to the kernel side raw1394
 of the Linux IEEE-1394 subsystem, which provides direct access to the
 connected 1394 buses to user space.  Through libraw1394/raw1394,
 applications can directly send to and receive from other nodes without
 requiring a kernel driver for the protocol in question.
Homepage: https://ieee1394.wiki.kernel.org/

Package: libraw20
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2278
Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libraw
Version: 0.20.2-2.1+deb12u2
Depends: libc6 (>= 2.33), libgcc-s1 (>= 3.0), libgomp1 (>= 6), libjpeg62-turbo (>= 1.3.1), liblcms2-2 (>= 2.2+git20110628), libstdc++6 (>= 5.2)
Description: raw image decoder library
 LibRaw is a library for reading RAW files obtained from digital photo cameras
 (CRW/CR2, NEF, RAF, DNG, and others).
 .
 This package contains the shared library.
Homepage: https://www.libraw.org

Package: libraw23t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2450
Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libraw
Version: 0.21.4-2+deb13u1
Replaces: libraw23
Provides: libraw23 (= 0.21.4-2+deb13u1)
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.0), libgomp1 (>= 6), libjpeg62-turbo (>= 1.3.1), liblcms2-2 (>= 2.2+git20110628), libstdc++6 (>= 5.2)
Breaks: libraw23 (<< 0.21.4-2+deb13u1)
Description: raw image decoder library
 LibRaw is a library for reading RAW files obtained from digital photo cameras
 (CRW/CR2, NEF, RAF, DNG, and others).
 .
 This package contains the shared library.
Homepage: https://www.libraw.org

Package: libreadline8t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 485
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: readline
Version: 8.2-6
Replaces: libreadline8
Provides: libreadline8 (= 8.2-6)
Depends: readline-common, libc6 (>= 2.38), libtinfo6 (>= 6)
Breaks: libreadline8 (<< 8.2-6)
Description: GNU readline and history libraries, run-time libraries
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.
Homepage: https://tiswww.case.edu/php/chet/readline/rltop.html

Package: libregexp-ipv6-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 19
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.03-3
Depends: perl
Description: Regular expression for IPv6 addresses
 Regexp::IPv6 exports the $IPv6_re regular expression that matches any valid
 IPv6 address as described in "RFC 2373 - 2.2 Text Representation of
 Addresses" but ::. Any string not compliant with such RFC will be rejected.
Homepage: https://metacpan.org/release/Regexp-IPv6/

Package: librist4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 187
Maintainer: Florian Ernst <florian@debian.org>
Architecture: amd64
Multi-Arch: same
Source: librist
Version: 0.2.11+dfsg-1
Depends: libc6 (>= 2.38), libcjson1 (>= 1.7.5), libmbedcrypto16 (>= 3.6.0)
Description: Reliable Internet Stream Transport -- shared library
 Reliable Internet Stream Transport (RIST) is a transport protocol
 designed for reliable transmission of video over lossy networks
 (including the Internet) with low latency and high quality.
 .
 RIST is intended as a more reliable successor to Secure Reliable
 Transport (SRT), and as an open alternative to proprietary commercial
 options such as Zixi, VideoFlow, QVidium, and DVEO (Dozer).
 .
 This package contains the shared library.
Homepage: https://code.videolan.org/rist/librist

Package: librsvg2-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 6160
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: librsvg
Version: 2.60.0+dfsg-1+deb13u1
Depends: libc6 (>= 2.38), libcairo-gobject2 (>= 1.10.0), libcairo2 (>= 1.15.8), libdav1d7 (>= 0.1.0), libgcc-s1 (>= 4.2), libgdk-pixbuf-2.0-0 (>= 2.25.2), libglib2.0-0t64 (>= 2.54.0), libpango-1.0-0 (>= 1.48.11), libpangocairo-1.0-0 (>= 1.48.11), libxml2 (>= 2.9.0)
Recommends: librsvg2-common
Suggests: librsvg2-bin
Description: SAX-based renderer library for SVG files (runtime)
 The rsvg library is an efficient renderer for Scalable Vector Graphics
 (SVG) pictures.
 .
 This package contains the runtime library, necessary to run
 applications using librsvg.
Homepage: https://wiki.gnome.org/Projects/LibRsvg

Package: librsvg2-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 400
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: librsvg
Version: 2.60.0+dfsg-1+deb13u1
Depends: librsvg2-2 (= 2.60.0+dfsg-1+deb13u1), libc6 (>= 2.34), libgcc-s1 (>= 4.2), libgdk-pixbuf-2.0-0 (>= 2.23.5-2), libglib2.0-0t64 (>= 2.50.0)
Description: SAX-based renderer library for SVG files (extra runtime)
 The rsvg library is an efficient renderer for Scalable Vector Graphics
 (SVG) pictures.
 .
 This package includes the gdk-pixbuf loader allowing
 to load SVG images transparently inside GTK+ applications.
Homepage: https://wiki.gnome.org/Projects/LibRsvg

Package: librtmp1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 144
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: rtmpdump (2.4+20151223.gitfa8646d.1-2)
Version: 2.4+20151223.gitfa8646d.1-2+b5
Depends: libc6 (>= 2.34), libgmp10 (>= 2:6.3.0+dfsg), libgnutls30t64 (>= 3.8.1), libhogweed6t64, libnettle8t64, zlib1g (>= 1:1.1.4)
Description: toolkit for RTMP streams (shared library)
 A small dumper for media content streamed over the RTMP protocol (like BBC's
 iPlayer high quality streams). Supplying an RTMP URL will result in a dumped
 flv file, which can be played/transcoded with standard tools.
 .
 This package contains the shared libraries, header files needed by
 programs that want to use librtmp.
Homepage: http://rtmpdump.mplayerhq.hu/

Package: librubberband2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 406
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: rubberband (3.3.0+dfsg-2)
Version: 3.3.0+dfsg-2+b3
Depends: libc6 (>= 2.34), libfftw3-double3 (>= 3.3.10), libgcc-s1 (>= 3.0), libsamplerate0 (>= 0.1.7), libstdc++6 (>= 13.1)
Description: audio time-stretching and pitch-shifting library
 Rubber Band is a library and utility program that permits you to
 change the tempo and pitch of an audio recording independently of one
 another.
Homepage: https://www.breakfastquay.com/rubberband/

Package: libsamplerate0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1494
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libsamplerate (0.2.2-4)
Version: 0.2.2-4+b2
Depends: libc6 (>= 2.14)
Description: Audio sample rate conversion library
 libsamplerate (aka Secret Rabbit Code) is a library for audio rate conversion.
 .
 libsamplerate currently provides three different sample rate conversion
 algorithms; zero order hold, linear interpolation and FIR filter interpolation
 (using filters derived from the mathematical SINC function). The first two
 algorithms (zero order hold and linear) are included for completeness and are
 not recommended for any application where high quality sample rate conversion
 is required. For the FIR/Sinc algorithm, three converters are provided;
 SRC_SINC_FASTEST, SRC_SINC_MEDIUM_QUALITY and SRC_SINC_BEST_QUALITY to allow a
 trade off between conversion speed and conversion quality.
 .
 libsamplerate is capable of downsampling to 1/256 of the original sample rate
 and upsampling to 256 times the original sample rate. It is also capable of
 time varying conversions for vary speed effects and synchronising of two
 unlocked sample rates.
Homepage: https://libsndfile.github.io/libsamplerate/

Package: libsasl2-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 156
Maintainer: Debian Cyrus Team <team+cyrus@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: cyrus-sasl2
Version: 2.1.28+dfsg1-9
Replaces: libsasl2
Depends: libsasl2-modules-db (>= 2.1.28+dfsg1-9), libc6 (>= 2.38), libssl3t64 (>= 3.0.0)
Recommends: libsasl2-modules (>= 2.1.28+dfsg1-9)
Description: Cyrus SASL - authentication abstraction library
 This is the Cyrus SASL API implementation, version 2.1.
 .
 SASL is the Simple Authentication and Security Layer, a method for
 adding authentication support to connection-based protocols. To use
 SASL, a protocol includes a command for identifying and
 authenticating a user to a server and for optionally negotiating
 protection of subsequent protocol interactions. If its use is
 negotiated, a security layer is inserted between the protocol and the
 connection. See RFC 2222 for more information.
 .
 Any of: ANONYMOUS, SCRAM, CRAM-MD5, DIGEST-MD5, GSSAPI (MIT or Heimdal
 Kerberos 5), NTLM, OTP, PLAIN, or LOGIN can be used.
Homepage: https://www.cyrusimap.org/sasl/

Package: libsasl2-modules-db
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 70
Maintainer: Debian Cyrus Team <team+cyrus@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: cyrus-sasl2
Version: 2.1.28+dfsg1-9
Depends: libc6 (>= 2.14), libdb5.3t64
Description: Cyrus SASL - pluggable authentication modules (DB)
 This is the Cyrus SASL API implementation, version 2.1. See package
 libsasl2-2 and RFC 2222 for more information.
 .
 This package provides the DB plugin, which supports Berkeley DB lookups.
Homepage: https://www.cyrusimap.org/sasl/

Package: libsdl2-2.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2055
Maintainer: Debian SDL packages maintainers <pkg-sdl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libsdl2
Version: 2.32.4+dfsg-1
Replaces: libsdl-1.3-0
Depends: libasound2t64 (>= 1.0.27), libc6 (>= 2.38), libdecor-0-0 (>= 0.1.1-2~), libdrm2 (>= 2.4.71), libgbm1 (>= 17.1.0~rc2), libpulse0 (>= 5.0), libsamplerate0 (>= 0.1.7), libwayland-client0 (>= 1.20.0), libwayland-cursor0 (>= 1.18), libwayland-egl1 (>= 1.18), libx11-6 (>= 2:1.2.99.901), libxcursor1 (>> 1.1.2), libxext6, libxfixes3 (>= 1:5.0), libxi6 (>= 2:1.6.99.1), libxkbcommon0 (>= 0.5.0), libxrandr2 (>= 2:1.2.99.3), libxss1
Suggests: xdg-utils
Conflicts: libsdl-1.3-0
Description: Simple DirectMedia Layer
 SDL is a library that allows programs portable low level access to a video
 framebuffer, audio output, mouse, and keyboard.
 .
 This package contains the shared library.
Homepage: https://www.libsdl.org/

Package: libseccomp2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 201
Maintainer: Kees Cook <kees@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libseccomp
Version: 2.6.0-2
Depends: libc6 (>= 2.14)
Description: high level interface to Linux seccomp filter
 This library provides a high level interface to constructing, analyzing
 and installing seccomp filters via a BPF passed to the Linux Kernel's
 prctl() syscall.
Homepage: https://github.com/seccomp/libseccomp

Package: libselinux1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 229
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libselinux
Version: 3.8.1-1
Depends: libc6 (>= 2.38), libpcre2-8-0 (>= 10.22)
Description: SELinux runtime shared libraries
 This package provides the shared libraries for Security-enhanced
 Linux that provides interfaces (e.g. library functions for the
 SELinux kernel APIs like getcon(), other support functions like
 getseuserbyname()) to SELinux-aware applications. Security-enhanced
 Linux is a patch of the Linux kernel and a number of utilities with
 enhanced security functionality designed to add mandatory access
 controls to Linux.  The Security-enhanced Linux kernel contains new
 architectural components originally developed to improve the security
 of the Flask operating system. These architectural components provide
 general support for the enforcement of many kinds of mandatory access
 control policies, including those based on the concepts of Type
 Enforcement, Role-based Access Control, and Multi-level Security.
 .
 libselinux1 provides an API for SELinux applications to get and set
 process and file security contexts and to obtain security policy
 decisions.  Required for any applications that use the SELinux
 API. libselinux may use the shared libsepol to manipulate the binary
 policy if necessary (e.g. to downgrade the policy format to an older
 version supported by the kernel) when loading policy.
Homepage: https://github.com/SELinuxProject

Package: libsemanage-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 21
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: libsemanage
Version: 3.8.1-1
Conffiles:
 /etc/selinux/semanage.conf 8e8dfac33a09c1b53ca08bf6d4201b10
Description: Common files for SELinux policy management libraries
 This package provides the common files used by the shared libraries
 for SELinux policy management.
 .
 Security-enhanced Linux is a patch of the Linux kernel and a
 number of utilities with enhanced security functionality designed to
 add mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement, Role-based Access
 Control, and Multi-level Security.
Homepage: https://selinuxproject.org

Package: libsemanage2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 313
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libsemanage
Version: 3.8.1-1
Depends: libsemanage-common (>= 3.8.1-1), libaudit1 (>= 1:2.2.1), libbz2-1.0, libc6 (>= 2.38), libselinux1 (>= 3.8.1), libsepol2 (>= 3.8.1)
Description: SELinux policy management library
 This package provides the shared libraries for SELinux policy management.
 It uses libsepol for binary policy manipulation and libselinux for
 interacting with the SELinux system.  It also exec's helper programs
 for loading policy and for checking whether the file_contexts
 configuration is valid (load_policy and setfiles from
 policycoreutils) presently, although this may change at least for the
 bootstrapping case
 .
 Security-enhanced Linux is a patch of the Linux kernel and a
 number of utilities with enhanced security functionality designed to
 add mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement, Role-based Access
 Control, and Multi-level Security.
Homepage: https://selinuxproject.org

Package: libsensors-config
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 37
Maintainer: Aurelien Jarno <aurel32@debian.org>
Architecture: all
Multi-Arch: foreign
Source: lm-sensors
Version: 1:3.6.2-2
Suggests: lm-sensors
Conffiles:
 /etc/sensors.d/.placeholder d41d8cd98f00b204e9800998ecf8427e
 /etc/sensors3.conf c8c2025da229e44c249f71ed24bdfa4d
Description: lm-sensors configuration files
 Lm-sensors is a hardware health monitoring package for Linux. It allows you
 to access information from temperature, voltage, and fan speed sensors. It
 works with most newer systems.
 .
 This library is only functional with a Linux kernel, it is provided on
 non-Linux systems for portability reasons only.
 .
 This package contains the configuration files.
Homepage: https://github.com/hramrach/lm-sensors

Package: libsensors5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 100
Maintainer: Aurelien Jarno <aurel32@debian.org>
Architecture: amd64
Multi-Arch: same
Source: lm-sensors
Version: 1:3.6.2-2
Depends: libsensors-config, libc6 (>= 2.38)
Suggests: lm-sensors
Description: library to read temperature/voltage/fan sensors
 Lm-sensors is a hardware health monitoring package for Linux. It allows you
 to access information from temperature, voltage, and fan speed sensors. It
 works with most newer systems.
 .
 This library is only functional with a Linux kernel, it is provided on
 non-Linux systems for portability reasons only.
 .
 This package contains a shared library for querying lm-sensors.
Homepage: https://github.com/hramrach/lm-sensors

Package: libsepol2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 835
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libsepol
Version: 3.8.1-1
Depends: libc6 (>= 2.38)
Description: SELinux library for manipulating binary security policies
 Security-enhanced Linux is a patch of the Linux kernel and a number
 of utilities with enhanced security functionality designed to add
 mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement®, Role-based Access
 Control, and Multi-level Security.
 .
 libsepol provides an API for the manipulation of SELinux binary policies.
 It is used by checkpolicy (the policy compiler) and similar tools, as well
 as by programs like load_policy that need to perform specific transformations
 on binary policies such as customizing policy boolean settings.
Homepage: https://selinuxproject.org

Package: libserd-0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 123
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: serd
Version: 0.32.4-1
Depends: libc6 (>= 2.29)
Suggests: serdi
Description: lightweight RDF syntax library
 Serd is a lightweight C library for RDF syntax which supports reading
 and writing Turtle and NTriples.
 .
 Serd is not intended to be a swiss-army knife of RDF syntax, but rather
 is suited to resource limited applications, or situations where a simple
 reader/writer with minimal dependencies is ideal (e.g. in LV2 hosts or
 plugins).
 .
 Serd is:
  * small: Serd is implemented in under 2500 lines1 of standard C code.
  * portable and dependency-free: Serd uses only the C standard library,
    and has no external dependencies, making it a lightweight dependency
    in every sense.
  * fast and lightweight: Serd (and the included serdi tool) can be used
    to stream abbreviated Turtle (unlike many other tools which can not
    stream since they must first build an internal model to abbreviate).
    In other words, Serd can re-serialise an unbounded amount of Turtle
    using a fixed amount of memory, preserving the abbreviations in the
    input.
  * conformant and well-tested: Serd is written to the Turtle, NTriples
    and URI specifications, and includes a comprehensive test suite which
    includes all the normative examples from the Turtle specification, all
    the "normal" examples from the URI specification, and additional tests
    added specifically for Serd. The test suite has over 96% code coverage
    (by line), and runs with zero memory errors or leaks.
Homepage: https://drobilla.net/software/serd.html

Package: libsframe1
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 110
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: binutils
Version: 2.44-3
Depends: libc6 (>= 2.14)
Description: Library to handle the SFrame format (runtime library)
 SFrame stands for Simple Frame format.  SFrame format keeps track
 of the minimal necessary information needed for generating stack traces.
 .
 This package includes the libsframe shared library.
Homepage: https://www.gnu.org/software/binutils/

Package: libsharpyuv-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 170
Maintainer: Jeff Breidenbach <jab@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libwebp
Version: 1.5.0-0.1
Depends: libsharpyuv0 (= 1.5.0-0.1)
Description: Library for sharp RGB to YUV conversion (development files)
 This library provides the function to convert RGB to YUV420 using
 a downsampling algorithm that minimizes artefacts caused by chroma
 subsampling.
 .
 This package provides the development files.
Homepage: https://developers.google.com/speed/webp/

Package: libsharpyuv0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 143
Maintainer: Jeff Breidenbach <jab@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libwebp
Version: 1.5.0-0.1
Depends: libc6 (>= 2.29)
Description: Library for sharp RGB to YUV conversion
 This library provides the function to convert RGB to YUV420 using
 a downsampling algorithm that minimizes artefacts caused by chroma
 subsampling.
 .
 This package provides the shared library files.
Homepage: https://developers.google.com/speed/webp/

Package: libshine3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 61
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: shine (3.1.1-2)
Version: 3.1.1-2+b2
Depends: libc6 (>= 2.29)
Description: Fixed-point MP3 encoding library - runtime files
 Shine can be used to encode audio data on architectures with no floating
 point processing unit (FPU) at a much better rate than encoding
 libraries implemented using floating-point arithmetic.
 .
 This package contains the files needed to run a program compiled using
 Shine.
Homepage: https://github.com/savonet/shine

Package: libsigsegv2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 64
Maintainer: Debian Common Lisp Team <debian-common-lisp@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libsigsegv (2.14-1)
Version: 2.14-1+b2
Depends: libc6 (>= 2.4)
Description: Library for handling page faults in a portable way
 GNU libsigsegv is a library that allows handling page faults in a
 portable way. It is used e.g. for generational garbage collectors
 and stack overflow handlers.
 .
 This package contains the shared library.
Homepage: https://www.gnu.org/software/libsigsegv/

Package: libslang2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2395
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Architecture: amd64
Multi-Arch: same
Source: slang2 (2.3.3-5)
Version: 2.3.3-5+b2
Depends: libc6 (>= 2.38)
Description: S-Lang programming library - runtime version
 S-Lang is a C programmer's library that includes routines for the rapid
 development of sophisticated, user friendly, multi-platform applications.
 .
 This package contains only the shared library libslang.so.* and copyright
 information. It is only necessary for programs that use this library (such
 as jed and slrn). If you plan on doing development with S-Lang, you will
 need the companion -dev package as well.
Built-Using: unicode-data (= 15.1.0-1)
Homepage: http://www.jedsoft.org/slang/

Package: libsm-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 107
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libsm
Version: 2:1.2.6-1
Depends: libsm6 (= 2:1.2.6-1), x11proto-dev, libice-dev (>= 1:1.0.0-1), uuid-dev
Suggests: libsm-doc
Description: X11 Session Management library (development headers)
 This package provides the main interface to the X11 Session Management
 library, which allows for applications to both manage sessions, and make use
 of session managers to save and restore their state for later use.
 .
 This package contains the development headers for the library found in libsm6.
 Non-developers likely have little use for this package.
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libSM
Homepage: https://www.x.org

Package: libsm6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 74
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libsm
Version: 2:1.2.6-1
Depends: libc6 (>= 2.14), libice6 (>= 1:1.0.0), libuuid1 (>= 2.16)
Description: X11 Session Management library
 This package provides the main interface to the X11 Session Management
 library, which allows for applications to both manage sessions, and make use
 of session managers to save and restore their state for later use.
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libSM
Homepage: https://www.x.org

Package: libsmartcols1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 377
Maintainer: Chris Hofstaedtler <zeha@debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.41.5-0+deb13u1
Depends: libc6 (>= 2.38)
Description: smart column output alignment library
 This smart column output alignment library is used by fdisk utilities.
Homepage: https://github.com/util-linux/util-linux

Package: libsnappy1v5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 93
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: snappy
Version: 1.2.2-1
Depends: libc6 (>= 2.14), libstdc++6 (>= 5.2)
Conflicts: libsnappy1
Description: fast compression/decompression library
 Snappy is a compression/decompression library. It does not aim for
 maximum compression, or compatibility with any other compression
 library; instead, it aims for very high speeds and reasonable
 compression.
 .
 For instance, compared to the fastest mode of zlib, Snappy
 is an order of magnitude faster for most inputs, but the resulting
 compressed files are anywhere from 20% to 100% bigger. On a single core
 of a Core i7 processor in 64-bit mode, Snappy compresses at about 250
 MB/sec or more and decompresses at about 500 MB/sec or more.
Homepage: https://google.github.io/snappy/

Package: libsndfile1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 595
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libsndfile
Version: 1.2.2-2+deb13u1
Depends: libc6 (>= 2.38), libflac14 (>= 1.5.0), libmp3lame0 (>= 3.100), libmpg123-0t64 (>= 1.28.0), libogg0 (>= 1.3.0), libopus0 (>= 1.1), libvorbis0a (>= 1.2.3), libvorbisenc2 (>= 1.1.2)
Description: Library for reading/writing audio files
 libsndfile is a library of C routines for reading and writing files containing
 sampled audio data.
 .
 Various versions of WAV (integer, floating point, GSM, and compressed formats);
 Microsoft PCM, A-law and u-law formats; AIFF, AIFC and RIFX; various AU/SND
 formats (Sun/NeXT, Dec AU, G721 and G723 ADPCM); RAW header-less PCM files;
 Amiga IFF/8SVX/16SV PCM files; Ensoniq PARIS  (.PAF); Apple's Core Audio Format
 (CAF) and others.
Homepage: https://libsndfile.github.io/libsndfile/

Package: libsndio7.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 92
Maintainer: Peter Piwowarski <peterjpiwowarski@gmail.com>
Architecture: amd64
Multi-Arch: same
Source: sndio
Version: 1.10.0-0.1
Replaces: libsndio7.1 (<= 1.8.1-1~exp2)
Depends: libasound2t64 (>= 1.0.17), libbsd0 (>= 0.0), libc6 (>= 2.38)
Suggests: sndiod
Breaks: libsndio7.1 (<= 1.8.1-1~exp2)
Description: Small audio and MIDI framework from OpenBSD, runtime libraries
 Sndio is a small, simple audio and MIDI framework, developed by the OpenBSD
 project. It provides a lightweight audio and MIDI server and a well-documented
 userspace API to access the server or audio hardware in a uniform way. Sndio is
 designed to work well for both desktop and professional music applications, and
 supports features found in more complex sound systems such as per-application
 volume control, software mixing, and network transparency.
 .
 This package contains the sndio userspace libraries.
Homepage: https://www.sndio.org/

Package: libsodium23
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 431
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libsodium
Version: 1.0.18-1+deb13u1
Depends: libc6 (>= 2.34)
Description: Network communication, cryptography and signaturing library
 NaCl (pronounced "salt") is a new easy-to-use high-speed software library for
 network communication, encryption, decryption, signatures, etc.
 .
 NaCl's goal is to provide all of the core operations needed to build
 higher-level cryptographic tools.
 .
 Sodium is a portable, cross-compilable, installable, packageable fork of NaCl,
 with a compatible API.
Homepage: https://www.libsodium.org/

Package: libsombok3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 128
Maintainer: Emmanuel Bouthenot <kolter@debian.org>
Architecture: amd64
Multi-Arch: same
Source: sombok (2.4.0-2)
Version: 2.4.0-2+b2
Depends: libthai0 (>= 0.1.12), libc6 (>= 2.14)
Description: Unicode Text Segmentation library
 Sombok library performs Line Breaking Algorithm described in Unicode
 Standards Annex #14 (UAX #14). East_Asian_Width informative properties
 defined by Annex #11 (UAX #11) may be concerned to determin breaking
 positions. This library also implements “default” Grapheme Cluster
 segmentation described in Annex #29 (UAX #29).
Homepage: https://github.com/hatukanezumi/sombok

Package: libsord-0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 54
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: sord
Version: 0.16.18-1
Depends: libc6 (>= 2.14), libserd-0-0 (>= 0.30), libzix-0-0 (>= 0.4.2)
Suggests: sordi
Description: library for storing RDF data in memory
 Sord is a lightweight C library for storing Resource
 Description Framework (RDF) data in memory.
 .
 Sord includes man pages for the library (man sord) and a
 simple command line utility (man sordi).
Homepage: https://drobilla.net/software/sord.html

Package: libsoxr0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 237
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libsoxr (0.1.3-4)
Version: 0.1.3-4+b2
Depends: libc6 (>= 2.29), libgomp1 (>= 4.9)
Description: High quality 1D sample-rate conversion library
 The SoX Resampler library `libsoxr' performs one-dimensional sample-rate
 conversion - it may be used, for example, to resample PCM-encoded audio.
 .
 It aims to give fast and high quality results for any constant (rational or
 irrational) resampling ratio. Phase-response, preserved bandwidth, aliasing,
 and rejection level parameters are all configurable; alternatively, simple
 `preset' configurations may be selected.
 .
 A simple API is provided that allows interfacing using commonly-used sample
 formats and buffering schemes.
Homepage: http://sourceforge.net/projects/soxr/

Package: libspeex1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 137
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: speex
Version: 1.2.1-3
Depends: libc6 (>= 2.29)
Suggests: speex
Description: Speex codec library (runtime library)
 Speex is an audio codec especially designed for compressing voice at low
 bit-rates for applications such as voice over IP (VoIP). In some senses,
 it is meant to be complementary to the Vorbis codec which places a greater
 emphasis on high-quality music reproduction.
 .
 This package provides the speex runtime library.
Homepage: https://www.speex.org/

Package: libsphinxbase3t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 334
Maintainer: Debian Accessibility Team <pkg-a11y-devel@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: same
Source: sphinxbase (0.8+5prealpha+1-21)
Version: 0.8+5prealpha+1-21+b1
Replaces: libsphinxbase3
Provides: libsphinxbase3 (= 0.8+5prealpha+1-21+b1)
Depends: libblas3 | libblas.so.3, libc6 (>= 2.34), liblapack3 | liblapack.so.3, libpulse0 (>= 0.99.1)
Breaks: libsphinxbase3 (<< 0.8+5prealpha+1-21)
Description: Speech recognition tool - shared library
 CMU Sphinx is a large vocabulary, speaker-independent continuous speech
 recognition engine.
 .
 This package contains the shared library.
Homepage: https://cmusphinx.sourceforge.net/

Package: libsqlite3-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1834
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: sqlite3
Version: 3.46.1-7+deb13u2
Depends: libc6 (>= 2.38)
Breaks: crowdsec (<< 1.4), python-migrate (<< 0.11.0-4~), python3-migrate (<< 0.11.0-4~)
Description: SQLite 3 shared library
 SQLite is a C library that implements an SQL database engine.
 Programs that link with the SQLite library can have SQL database
 access without running a separate RDBMS process.
Homepage: https://www.sqlite.org/

Package: libsratom-0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 61
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: sratom
Version: 0.6.18-1
Depends: libc6 (>= 2.14), libserd-0-0 (>= 0.30.2), libsord-0-0 (>= 0.16.16)
Description: library for serialising LV2 atoms to/from Turtle
 Sratom is a new C library for serialising LV2 atoms to/from Turtle.
 It is intended to be a full serialisation solution for LV2 atoms,
 allowing implementations to serialise binary atoms to strings and
 read them back again. This is particularly useful for saving plugin
 state, or implementing plugin control with network transparency.
 Sratom uses Serd and Sord to do the work, it is a small library
 implemented in a single source file, suitable for direct inclusion
 in projects if avoiding a dependency is desired.
Homepage: https://drobilla.net/software/sratom/

Package: libsrt1.5-gnutls
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1012
Maintainer: Florian Ernst <florian@debian.org>
Architecture: amd64
Multi-Arch: same
Source: srt
Version: 1.5.4-1+deb13u1
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.0), libgnutls30t64 (>= 3.7.0), libnettle8t64, libstdc++6 (>= 14)
Description: Secure Reliable Transport UDP streaming library (GnuTLS flavour)
 SRT is a latency-aware UDP transport mechanism optimized for video streams.
 It detects and compensates for jitter and bandwidth fluctuations due to
 network congestion. It mitigates packet loss and supports AES encryption.
 .
 SSL support is provided by GnuTLS.
Homepage: https://github.com/Haivision/srt

Package: libss2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 80
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs (1.47.2-3)
Version: 1.47.2-3+b12
Replaces: e2fsprogs (<< 1.34-1), libss2t64
Provides: libss2t64 (= 1.47.2-3+b12)
Depends: libcom-err2, libc6 (>= 2.34)
Breaks: libss2t64 (<< 1.47.0-2.4~exp1~)
Description: command-line interface parsing library
 libss provides a simple command-line interface parser which will
 accept input from the user, parse the command into an argv argument
 vector, and then dispatch it to a handler function.
 .
 It was originally inspired by the Multics SubSystem library.
Homepage: http://e2fsprogs.sourceforge.net

Package: libssh-4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 583
Maintainer: Laurent Bigonville <bigon@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libssh
Version: 0.11.5-0+deb13u1
Depends: libc6 (>= 2.34), libgssapi-krb5-2 (>= 1.17), libssl3t64 (>= 3.0.0), zlib1g (>= 1:1.1.4)
Description: tiny C SSH library (OpenSSL flavor)
 The ssh library was designed to be used by programmers needing a working SSH
 implementation by the mean of a library. The complete control of the client
 is made by the programmer. With libssh, you can remotely execute programs,
 transfer files, use a secure and transparent tunnel for your remote programs.
 With its SFTP implementation, you can play with remote files easily.
 .
 This package contains shared libraries linked against OpenSSL.
Homepage: https://www.libssh.org/

Package: libssh-gcrypt-4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 637
Maintainer: Laurent Bigonville <bigon@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libssh
Version: 0.10.6-0+deb12u2
Depends: libc6 (>= 2.33), libgcrypt20 (>= 1.10.0), libgpg-error0 (>= 1.14), libgssapi-krb5-2 (>= 1.17), zlib1g (>= 1:1.1.4)
Description: tiny C SSH library (gcrypt flavor)
 The ssh library was designed to be used by programmers needing a working SSH
 implementation by the mean of a library. The complete control of the client
 is made by the programmer. With libssh, you can remotely execute programs,
 transfer files, use a secure and transparent tunnel for your remote programs.
 With its SFTP implementation, you can play with remote files easily.
 .
 This package contains shared libraries linked against gcrypt.
Homepage: https://www.libssh.org/

Package: libssh2-1t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 441
Maintainer: Nicolas Mora <babelouest@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libssh2
Version: 1.11.1-1+deb13u2
Replaces: libssh2-1
Provides: libssh2-1 (= 1.11.1-1+deb13u2)
Depends: libc6 (>= 2.25), libssl3t64 (>= 3.0.0), zlib1g (>= 1:1.1.4)
Breaks: libssh2-1 (<< 1.11.1-1+deb13u2)
Description: SSH2 client-side library
 libssh2 is a client-side C library implementing the SSH2 protocol.
 It supports regular terminal, SCP and SFTP (v1-v5) sessions;
 port forwarding, X11 forwarding; password, key-based and
 keyboard-interactive authentication.
 .
 This package contains the runtime library.
Homepage: https://libssh2.org/

Package: libssl3t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 8115
Maintainer: Debian OpenSSL Team <pkg-openssl-devel@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: same
Source: openssl
Version: 3.5.7-1~deb13u3
Replaces: libssl3
Provides: libssl3 (= 3.5.7-1~deb13u3)
Depends: libc6 (>= 2.38), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4), openssl-provider-legacy
Breaks: freeradius (<< 3.2.7+dfsg-1+deb13u1), libssl3 (<< 3.5.7-1~deb13u3), openssh-client (<< 1:9.4p1), openssh-server (<< 1:9.4p1), python3-m2crypto (<< 0.38.0-4)
Description: Secure Sockets Layer toolkit - shared libraries
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 It provides the libssl and libcrypto shared libraries.
Homepage: https://openssl-library.org

Package: libstdc++-12-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 19512
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.4.0-5
Provides: libstdc++-dev
Depends: gcc-12-base (= 12.4.0-5), libgcc-12-dev (= 12.4.0-5), libstdc++6 (>= 12.4.0-5), libc6-dev (>= 2.23-1~)
Suggests: libstdc++-12-doc
Description: GNU Standard C++ Library v3 (development files)
 This package contains the headers and static library files necessary for
 building C++ programs which use libstdc++.
 .
 libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
 was included up to g++-2.95. The first version of libstdc++-v3 appeared
 in g++-3.0.
Homepage: http://gcc.gnu.org/

Package: libstdc++-14-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 22065
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-14
Version: 14.2.0-19
Provides: libstdc++-dev
Depends: gcc-14-base (= 14.2.0-19), libgcc-14-dev (= 14.2.0-19), libstdc++6 (>= 14.2.0-19), libc6-dev (>= 2.23-1~)
Suggests: libstdc++-14-doc
Description: GNU Standard C++ Library v3 (development files)
 This package contains the headers and static library files necessary for
 building C++ programs which use libstdc++.
 .
 libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
 was included up to g++-2.95. The first version of libstdc++-v3 appeared
 in g++-3.0.
Homepage: http://gcc.gnu.org/

Package: libstdc++6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3019
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-14
Version: 14.2.0-19
Replaces: libstdc++6-14-dbg (<< 4.9.0-3)
Depends: gcc-14-base (= 14.2.0-19), libc6 (>= 2.38), libgcc-s1 (>= 4.3)
Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Conflicts: scim (<< 1.4.2-1)
Description: GNU Standard C++ Library v3
 This package contains an additional runtime library for C++ programs
 built with the GNU compiler.
 .
 libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
 was included up to g++-2.95. The first version of libstdc++-v3 appeared
 in g++-3.0.
Homepage: http://gcc.gnu.org/

Package: libsvtav1enc1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 6632
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: svt-av1
Version: 1.4.1+dfsg-1
Depends: libc6 (>= 2.34)
Description: Scalable Video Technology for AV1 (libsvtav1enc shared library)
 The Scalable Video Technology for AV1 (SVT-AV1 Encoder and Decoder) is an
 AV1-compliant encoder/decoder library core. The SVT-AV1 encoder development
 is a work-in-progress targeting performance levels applicable to both VOD and
 Live encoding / transcoding video applications. The SVT-AV1 decoder
 implementation is targeting future codec research activities.
 .
 This package provides the shared library libsvtav1enc.
Homepage: https://gitlab.com/AOMediaCodec/SVT-AV1

Package: libsvtav1enc2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 7839
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: svt-av1
Version: 2.3.0+dfsg-1
Depends: libc6 (>= 2.34)
Description: Scalable Video Technology for AV1 (libsvtav1enc shared library)
 The Scalable Video Technology for AV1 (SVT-AV1 Encoder) is an
 AV1-compliant encoder library core. The SVT-AV1 encoder development
 is a work-in-progress targeting performance levels applicable to both VOD and
 Live encoding / transcoding video applications. The SVT-AV1 decoder
 implementation is targeting future codec research activities.
 .
 This package provides the shared library libsvtav1enc.
Homepage: https://gitlab.com/AOMediaCodec/SVT-AV1

Package: libswresample4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 236
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ffmpeg
Version: 7:5.1.9-0+deb12u1
Depends: libavutil57 (>= 7:5.1), libc6 (>= 2.29), libsoxr0 (>= 0.1.0)
Description: FFmpeg library for audio resampling, rematrixing etc. - runtime files
 FFmpeg is the leading multimedia framework, able to decode, encode, transcode,
 mux, demux, stream, filter and play pretty much anything that humans and
 machines have created. It supports the most obscure ancient formats up to the
 cutting edge.
 .
 This library performs highly optimized audio resampling, rematrixing
 and sample format conversion operations.
 Specifically, this library performs the following conversions:
  * Resampling is the process of changing the audio rate, for example from a
    high sample rate of 44100Hz to 8000Hz. Audio conversion from high to low
    sample rate is a lossy process. Several resampling options and algorithms
    are available.
  * Rematrixing is the process of changing the channel layout, for example from
    stereo to mono. When the input channels cannot be mapped to the output
    streams, the process is lossy, since it involves different gain factors
    and mixing. Various other audio conversions (e.g. stretching and padding)
    are enabled through dedicated options.
  * Format conversion is the process of converting the type of samples, for
    example from 16-bit signed samples to unsigned 8-bit or float samples.
    It also handles packing conversion, when passing from packed layout (all
    samples belonging to distinct channels interleaved in the same buffer), to
    planar layout (all samples belonging to the same channel stored in a
    dedicated buffer or "plane").
 .
 This package contains the runtime files.
Homepage: https://ffmpeg.org/

Package: libswresample5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 241
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ffmpeg
Version: 7:7.1.5-0+deb13u1
Depends: libavutil59 (>= 7:7.1.5), libc6 (>= 2.29), libsoxr0 (>= 0.1.0)
Description: FFmpeg library for audio resampling, rematrixing etc. - runtime files
 FFmpeg is the leading multimedia framework, able to decode, encode, transcode,
 mux, demux, stream, filter and play pretty much anything that humans and
 machines have created. It supports the most obscure ancient formats up to the
 cutting edge.
 .
 This library performs highly optimized audio resampling, rematrixing
 and sample format conversion operations.
 Specifically, this library performs the following conversions:
  * Resampling is the process of changing the audio rate, for example from a
    high sample rate of 44100Hz to 8000Hz. Audio conversion from high to low
    sample rate is a lossy process. Several resampling options and algorithms
    are available.
  * Rematrixing is the process of changing the channel layout, for example from
    stereo to mono. When the input channels cannot be mapped to the output
    streams, the process is lossy, since it involves different gain factors
    and mixing. Various other audio conversions (e.g. stretching and padding)
    are enabled through dedicated options.
  * Format conversion is the process of converting the type of samples, for
    example from 16-bit signed samples to unsigned 8-bit or float samples.
    It also handles packing conversion, when passing from packed layout (all
    samples belonging to distinct channels interleaved in the same buffer), to
    planar layout (all samples belonging to the same channel stored in a
    dedicated buffer or "plane").
 .
 This package contains the runtime files.
Homepage: https://ffmpeg.org/

Package: libswscale6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 760
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ffmpeg
Version: 7:5.1.9-0+deb12u1
Depends: libavutil57 (= 7:5.1.9-0+deb12u1), libc6 (>= 2.34)
Description: FFmpeg library for image scaling and various conversions - runtime files
 FFmpeg is the leading multimedia framework, able to decode, encode, transcode,
 mux, demux, stream, filter and play pretty much anything that humans and
 machines have created. It supports the most obscure ancient formats up to the
 cutting edge.
 .
 This library performs highly optimized image scaling and colorspace and pixel
 format conversion operations.
 Specifically, this library performs the following conversions:
  * Rescaling is the process of changing the video size. Several rescaling
    options and algorithms are available. This is usually a lossy process.
  * Pixel format conversion is the process of converting the image format and
    colorspace of the image, for example from planar YUV420P to RGB24 packed.
    It also handles packing conversion, that is converts from packed layout
    (all pixels belonging to distinct planes interleaved in the same buffer),
    to planar layout (all samples belonging to the same plane stored in a
    dedicated buffer or "plane"). This is usually a lossy process in case the
    source and destination colorspaces differ.
 .
 This package contains the runtime files.
Homepage: https://ffmpeg.org/

Package: libswscale8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 781
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ffmpeg
Version: 7:7.1.5-0+deb13u1
Depends: libavutil59 (= 7:7.1.5-0+deb13u1), libc6 (>= 2.34)
Description: FFmpeg library for image scaling and various conversions - runtime files
 FFmpeg is the leading multimedia framework, able to decode, encode, transcode,
 mux, demux, stream, filter and play pretty much anything that humans and
 machines have created. It supports the most obscure ancient formats up to the
 cutting edge.
 .
 This library performs highly optimized image scaling and colorspace and pixel
 format conversion operations.
 Specifically, this library performs the following conversions:
  * Rescaling is the process of changing the video size. Several rescaling
    options and algorithms are available. This is usually a lossy process.
  * Pixel format conversion is the process of converting the image format and
    colorspace of the image, for example from planar YUV420P to RGB24 packed.
    It also handles packing conversion, that is converts from packed layout
    (all pixels belonging to distinct planes interleaved in the same buffer),
    to planar layout (all samples belonging to the same plane stored in a
    dedicated buffer or "plane"). This is usually a lossy process in case the
    source and destination colorspaces differ.
 .
 This package contains the runtime files.
Homepage: https://ffmpeg.org/

Package: libsystemd-shared
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 6825
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 257.13-1~deb13u1
Depends: libacl1 (>= 2.2.23), libaudit1 (>= 1:2.2.1), libblkid1 (>= 2.30.2), libc6 (>= 2.39), libcap2 (>= 1:2.10), libcrypt1 (>= 1:4.4.0), libmount1 (>= 2.30), libpam0g (>= 0.99.7.1), libseccomp2 (>= 2.4.1), libselinux1 (>= 3.1~), libssl3t64 (>= 3.4.0)
Recommends: libkmod2, libzstd1
Suggests: libarchive13t64, libbpf1, libcryptsetup12, libdw1t64, libelf1t64, libfido2-1, libgcrypt20, libidn2-0, libip4tc2, liblz4-1, liblzma5, libp11-kit0, libpcre2-8-0, libpwquality1, libqrencode4, libtss2-rc0t64
Description: systemd shared private library
 This internal shared library provides common code used by various systemd
 components. It is supposed to decrease memory and disk footprint.
 The shared library is not meant for public use and is not API or ABI stable.
Homepage: https://systemd.io

Package: libsystemd0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1223
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 257.13-1~deb13u1
Depends: libc6 (>= 2.39), libcap2 (>= 1:2.10)
Recommends: libzstd1
Suggests: libgcrypt20, liblz4-1, liblzma5
Description: systemd utility library
 This library provides APIs to interface with various system components such as
 the system journal, the system service manager, D-Bus and more.
Homepage: https://systemd.io

Package: libtasn1-6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 122
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Version: 4.20.0-2+deb13u1
Depends: libc6 (>= 2.38)
Description: Manage ASN.1 structures (runtime)
 Manage ASN1 (Abstract Syntax Notation One) structures.
 The main features of this library are:
   * on-line ASN1 structure management that doesn't require any C code
     file generation.
   * off-line ASN1 structure management with C code file generation
     containing an array.
   * DER (Distinguish Encoding Rules) encoding
   * no limits for INTEGER and ENUMERATED values
 .
 This package contains runtime libraries.
Homepage: https://www.gnu.org/software/libtasn1/

Package: libterm-readkey-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 74
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: libterm-readkey-perl (2.38-2)
Version: 2.38-2+b4
Depends: perl (>= 5.40.0-6), perlapi-5.40.0, libc6 (>= 2.28)
Description: perl module for simple terminal control
 Term::ReadKey is a compiled perl module dedicated to providing simple
 control over terminal driver modes (cbreak, raw, cooked, etc.) support for
 non-blocking reads, if the architecture allows, and some generalized handy
 functions for working with terminals. One of the main goals is to have the
 functions as portable as possible, so you can just plug in "use
 Term::ReadKey" on any architecture and have a good likelihood of it working.
Homepage: https://metacpan.org/release/TermReadKey

Package: libtext-charwidth-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 42
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libtext-charwidth-perl (0.04-11)
Version: 0.04-11+b4
Depends: libc6 (>= 2.4), perl-base (>= 5.40.0-6), perlapi-5.40.0
Description: get display widths of characters on the terminal
 Text::CharWidth permits one to get the display widths of characters
 and strings on the terminal, using wcwidth() and wcswidth() from libc.
 .
 It provides mbwidth(), mbswidth(), and mblen().
Homepage: https://metacpan.org/release/Text-CharWidth

Package: libtext-iconv-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 50
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libtext-iconv-perl (1.7-8)
Version: 1.7-8+b4
Depends: libc6 (>= 2.4), perl-base (>= 5.40.0-6), perlapi-5.40.0
Description: module to convert between character sets in Perl
 The iconv() family of functions from XPG4 defines an API for converting
 between character sets (e.g. UTF-8 to Latin1, EBCDIC to ASCII). They
 are provided by libc6.
 .
 This package allows access to them from Perl via the Text::Iconv
 package.
Homepage: https://metacpan.org/release/Text-Iconv

Package: libtext-wrapi18n-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 26
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.06-10
Depends: libtext-charwidth-perl
Description: internationalized substitute of Text::Wrap
 The Text::WrapI18N module is a substitution for Text::Wrap, supporting
 multibyte characters such as UTF-8, EUC-JP, and GB2312, fullwidth characters
 such as east Asian characters, combining characters such as diacritical marks
 and Thai, and languages which don't use whitespaces between words such as
 Chinese and Japanese.
 .
 It provides wrap().
Homepage: https://metacpan.org/release/Text-WrapI18N

Package: libthai-data
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 618
Maintainer: Theppitak Karoonboonyanan <thep@debian.org>
Architecture: all
Multi-Arch: foreign
Source: libthai
Version: 0.1.29-2
Breaks: libthai0 (<< 0.1.10)
Description: Data files for Thai language support library
 LibThai is a set of Thai language support routines aimed to ease
 developers' tasks to incorporate Thai language support in their applications.
 It includes important Thai-specific functions e.g. word breaking, input and
 output methods as well as basic character and string supports.
 .
 This package contains data files needed by the LibThai library.
Homepage: https://linux.thai.net/projects/libthai

Package: libthai0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 92
Maintainer: Theppitak Karoonboonyanan <thep@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libthai (0.1.29-2)
Version: 0.1.29-2+b1
Depends: libthai-data (>= 0.1.10), libc6 (>= 2.14), libdatrie1 (>= 0.2.0)
Enhances: libqtcore4, libqtgui4
Description: Thai language support library
 LibThai is a set of Thai language support routines aimed to ease
 developers' tasks to incorporate Thai language support in their applications.
 It includes important Thai-specific functions e.g. word breaking, input and
 output methods as well as basic character and string supports.
 .
 This package contains the shared libraries needed to run programs that use
 the LibThai library.
Homepage: https://linux.thai.net/projects/libthai

Package: libtheora0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 312
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libtheora
Version: 1.2.0~alpha1+dfsg-6
Depends: libc6 (>= 2.14), libcairo2 (>= 1.2.4), libogg0 (>= 1.1.0), libtheoradec1 (= 1.2.0~alpha1+dfsg-6), libtheoraenc1 (= 1.2.0~alpha1+dfsg-6)
Description: Theora Video Compression Codec (shared library - libtheora)
 Theora is an open video codec being developed by the Xiph.org Foundation as
 part of their Ogg project. Theora is originally derived from On2's VP3 codec,
 and has improved on it significantly with the merging of code from the
 Thusnelda branch.
 .
 This package contains the shared library libtheora.
Homepage: https://www.theora.org/

Package: libtheoradec1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 136
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libtheora
Version: 1.2.0~alpha1+dfsg-6
Replaces: libtheora0 (<< 1.2.0~alpha1+dfsg-1)
Depends: libc6 (>= 2.14), libcairo2 (>= 1.2.4)
Breaks: libtheora0 (<< 1.2.0~alpha1+dfsg-1)
Description: Theora Video Compression Codec (shared library - libtheoradec)
 Theora is an open video codec being developed by the Xiph.org Foundation as
 part of their Ogg project. Theora is originally derived from On2's VP3 codec,
 and has improved on it significantly with the merging of code from the
 Thusnelda branch.
 .
 This package contains the shared library libtheoradec.
Homepage: https://www.theora.org/

Package: libtheoraenc1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 255
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libtheora
Version: 1.2.0~alpha1+dfsg-6
Replaces: libtheora0 (<< 1.2.0~alpha1+dfsg-1)
Depends: libc6 (>= 2.14), libogg0 (>= 1.1.0)
Breaks: libtheora0 (<< 1.2.0~alpha1+dfsg-1)
Description: Theora Video Compression Codec (shared library - libtheoraenc)
 Theora is an open video codec being developed by the Xiph.org Foundation as
 part of their Ogg project. Theora is originally derived from On2's VP3 codec,
 and has improved on it significantly with the merging of code from the
 Thusnelda branch.
 .
 This package contains the shared library libtheoraenc.
Homepage: https://www.theora.org/

Package: libtie-ixhash-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 34
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.23-4
Depends: perl:any
Description: Perl module to order associative arrays
 Tie::IxHash implements Perl hashes that preserve the order in which the
 hash elements were added. The order is not affected when values
 corresponding to existing keys in the IxHash are changed. The elements can
 also be set to any arbitrary supplied order. The familiar perl array
 operations can also be performed on the IxHash.
Homepage: https://metacpan.org/release/Tie-IxHash

Package: libtiff-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1368
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: tiff
Version: 4.7.0-3+deb13u3
Replaces: libtiff4-dev (<< 4.0.3-6~), libtiff5-alt-dev (<< 4.0.3-6~), libtiff5-dev (<< 4.0.10-1~)
Depends: libc6-dev | libc-dev, libjbig-dev, libjpeg-dev, liblzma-dev, libzstd-dev, libwebp-dev, libtiff6 (= 4.7.0-3+deb13u3), libtiffxx6 (= 4.7.0-3+deb13u3), zlib1g-dev, libdeflate-dev, liblerc-dev
Breaks: libtiff4-dev (<< 4.0.3-6~), libtiff5-alt-dev (<< 4.0.3-6~), libtiff5-dev (<< 4.0.10-1~)
Description: Tag Image File Format library (TIFF), development files
 libtiff is a library providing support for the Tag Image File Format
 (TIFF), a widely used format for storing image data.  This package
 includes the development files, static library, and header files.
Homepage: https://libtiff.gitlab.io/libtiff/

Package: libtiff6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 766
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: tiff
Version: 4.7.0-3+deb13u3
Depends: libc6 (>= 2.33), libdeflate0 (>= 1.0), libjbig0 (>= 2.0), libjpeg62-turbo (>= 1.3.1), liblerc4 (>= 3.0), liblzma5 (>= 5.1.1alpha+20120614), libwebp7 (>= 1.5.0), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4)
Breaks: libimager-perl (<< 1.022+dfsg)
Description: Tag Image File Format (TIFF) library
 libtiff is a library providing support for the Tag Image File Format
 (TIFF), a widely used format for storing image data.  This package
 includes the shared library.
Homepage: https://libtiff.gitlab.io/libtiff/

Package: libtiffxx6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 182
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: tiff
Version: 4.7.0-3+deb13u3
Depends: libc6 (>= 2.4), libstdc++6 (>= 13.1), libtiff6 (>= 4.0.3)
Description: Tag Image File Format (TIFF) library -- C++ interface
 libtiff is a library providing support for the Tag Image File Format
 (TIFF), a widely used format for storing image data.  This package
 includes the shared library for the experimental C++ interfaces.
Homepage: https://libtiff.gitlab.io/libtiff/

Package: libtimedate-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 127
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2.3300-2
Depends: perl:any
Description: collection of modules to manipulate date/time information
 TimeDate is a collection of Perl modules useful for manipulating date and
 time information. Date::Parse can parse absolute date specifications in a
 wide variety of input formats and many languages (via Date::Language).
 .
 This package also includes Date::Format, which can format dates into strings,
 as well as Time::Zone, which contains miscellaneous time zone functions.
Homepage: https://metacpan.org/release/TimeDate

Package: libtinfo6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 569
Maintainer: Ncurses Maintainers <ncurses@packages.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.5+20250216-2
Depends: libc6 (>= 2.34)
Breaks: tmux (<< 3.3a-4)
Description: shared low-level terminfo library for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared low-level terminfo library.
Homepage: https://invisible-island.net/ncurses/

Package: libtirpc-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 32
Maintainer: Josue Ortega <josue@debian.org>
Architecture: all
Multi-Arch: foreign
Source: libtirpc
Version: 1.3.6+ds-1
Replaces: libtirpc1, libtirpc3t64 (<< 1.1.4-0.1~)
Breaks: libtirpc1, libtirpc3t64 (<< 1.1.4-0.1~)
Conffiles:
 /etc/netconfig ca8db53e3af4d735335c2607d21c7195
Description: transport-independent RPC library - common files
 This package contains a port of Sun's transport-independent RPC library to
 Linux. The library is intended as a replacement for the RPC code in the GNU C
 library, providing among others support for RPC (and in turn, NFS) over IPv6.
 .
 This package contains the netconfig configuration file as well as the
 associated manpage.
Homepage: http://sourceforge.net/projects/libtirpc

Package: libtirpc-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 738
Maintainer: Josue Ortega <josue@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libtirpc
Version: 1.3.6+ds-1
Depends: libtirpc3t64 (= 1.3.6+ds-1)
Description: transport-independent RPC library - development files
 This package contains a port of Sun's transport-independent RPC library to
 Linux. The library is intended as a replacement for the RPC code in the GNU C
 library, providing among others support for RPC (and in turn, NFS) over IPv6.
 .
 This package contains the files needed for development against libtirpc.
Homepage: http://sourceforge.net/projects/libtirpc

Package: libtirpc3t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 236
Maintainer: Josue Ortega <josue@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libtirpc
Version: 1.3.6+ds-1
Replaces: libtirpc3
Provides: libtirpc3 (= 1.3.6+ds-1)
Depends: libc6 (>= 2.38), libgssapi-krb5-2 (>= 1.17), libtirpc-common (>= 1.3.6+ds-1)
Breaks: libtirpc3 (<< 1.3.6+ds-1), nfs-common (<< 1:1.2.8-7), nfs-kernel-server (<< 1:1.2.8-7)
Description: transport-independent RPC library
 This package contains a port of Sun's transport-independent RPC library to
 Linux. The library is intended as a replacement for the RPC code in the GNU C
 library, providing among others support for RPC (and in turn, NFS) over IPv6.
Homepage: http://sourceforge.net/projects/libtirpc

Package: libtool
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 1245
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2.5.4-4
Depends: gcc | c-compiler, cpp, libc6-dev | libc-dev, file, autotools-dev
Recommends: libltdl-dev
Suggests: libtool-doc, autoconf, automaken, gfortran | fortran95-compiler, gcj-jdk
Description: Generic library support script
 This is GNU libtool, a generic library support script.  Libtool hides
 the complexity of generating special library types (such as shared
 libraries) behind a consistent interface.  To use libtool, add the
 new generic library building commands to your Makefile, Makefile.in,
 or Makefile.am.  See the documentation for details.  Libtool supports
 building static libraries on all platforms.
 .
 Libtool supports generation of C, C++, Fortran and Java libraries.
Homepage: https://www.gnu.org/software/libtool/

Package: libtry-tiny-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 46
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.32-1
Depends: perl:any
Suggests: libsub-name-perl
Description: module providing minimalistic try/catch
 Try::Tiny is a Perl module that provides bare bones try/catch statements. It
 is designed to eliminate common mistakes with eval blocks, and NOTHING else.
 .
 The main focus of this module is to provide simple and reliable error
 handling for those having a hard time installing TryCatch, but who still want
 to write correct eval blocks without 5 lines of boilerplate each time.
Homepage: https://metacpan.org/release/Try-Tiny

Package: libtsan2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 8807
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-14
Version: 14.2.0-19
Depends: gcc-14-base (= 14.2.0-19), libc6 (>= 2.34), libgcc-s1 (>= 3.4)
Description: ThreadSanitizer -- a Valgrind-based detector of data races (runtime)
 ThreadSanitizer (Tsan) is a data race detector for C/C++ programs.
 The Linux and Mac versions are based on Valgrind.
Homepage: http://gcc.gnu.org/

Package: libtwolame0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 155
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: twolame (0.4.0-2)
Version: 0.4.0-2+b2
Depends: libc6 (>= 2.29)
Description: MPEG Audio Layer 2 encoding library
 TwoLAME is an optimized MPEG Audio Layer 2 encoder. It is based on tooLAME by
 Mike Cheng, which in turn is based upon the ISO dist10 code and portions of
 LAME.
 .
 TwoLAME does NOT support MPEG Audio Layer 3 (MP3) encoding due to patent
 issues surrounding MP3.
 .
 However, as most MPEG Audio players are able to play layer 2 (MP2) files,
 TwoLAME makes a very good drop-in replacement for LAME and other layer 3
 encoders.
 .
 This package contains the shared library.
Homepage: http://www.twolame.org

Package: libubsan1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3319
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-14
Version: 14.2.0-19
Depends: gcc-14-base (= 14.2.0-19), libc6 (>= 2.34), libgcc-s1 (>= 3.3), libstdc++6 (>= 4.1.1)
Description: UBSan -- undefined behaviour sanitizer (runtime)
 UndefinedBehaviorSanitizer can be enabled via -fsanitize=undefined.
 Various computations will be instrumented to detect undefined behavior
 at runtime. Available for C and C++.
Homepage: http://gcc.gnu.org/

Package: libuchardet0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 216
Maintainer: James Cowgill <jcowgill@debian.org>
Architecture: amd64
Multi-Arch: same
Source: uchardet (0.0.8-1)
Version: 0.0.8-1+b2
Depends: libc6 (>= 2.14), libgcc-s1 (>= 3.0), libstdc++6 (>= 4.1.1)
Description: universal charset detection library - shared library
 uchardet is a C language binding of the original C++ implementation
 of the universal charset detection library by Mozilla.
 .
 uchardet is a encoding detector library, which takes a sequence of
 bytes in an unknown character encoding without any additional
 information, and attempts to determine the encoding of the text.
 .
 This package contains the shared library.
Homepage: https://www.freedesktop.org/wiki/Software/uchardet/

Package: libudev1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 357
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 257.13-1~deb13u1
Depends: libc6 (>= 2.38), libcap2 (>= 1:2.10)
Suggests: libidn2-0
Description: libudev shared library
 This library provides APIs to introspect and enumerate devices on the local
 system.
Homepage: https://systemd.io

Package: libudfread0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 57
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libudfread (1.1.2-1)
Version: 1.1.2-1+b2
Depends: libc6 (>= 2.14)
Description: UDF reader library
 This library allows reading UDF filesystems, like raw devices and image files.
 .
 The library is created and maintained by VideoLAN Project and is used by
 projects like VLC and Kodi.
Homepage: https://www.videolan.org/developers/libudfread.html

Package: libunbound8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1420
Maintainer: unbound packagers <unbound@packages.debian.org>
Architecture: amd64
Multi-Arch: same
Source: unbound
Version: 1.26.1-0+deb13u1
Depends: libc6 (>= 2.38), libevent-2.1-7t64 (>= 2.1.8-stable), libssl3t64 (>= 3.4.0)
Description: library implementing DNS resolution and validation
 libunbound performs and validates DNS lookups; it can be used to convert
 hostnames to IP addresses and back and obtain other information from the
 DNS. Cryptographic validation of results is performed with DNSSEC.
Homepage: https://www.unbound.net/

Package: libunibreak6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 150
Maintainer: Debian Qt/KDE Maintainers <debian-qt-kde@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libunibreak
Version: 6.1-3
Depends: libc6 (>= 2.4)
Description: line breaking library for Unicode (shared library)
 libunibreak is an implementation of the Unicode line breaking algorithm
 described at http://www.unicode.org/reports/tr29/tr29-21.html
 .
 This package contains shared library to dynamically link with.
Homepage: https://github.com/adah1972/libunibreak

Package: libunicode-linebreak-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 261
Maintainer: Emmanuel Bouthenot <kolter@debian.org>
Architecture: amd64
Source: libunicode-linebreak-perl (0.0.20190101-1)
Version: 0.0.20190101-1+b9
Depends: perl (>= 5.40.0-8), perlapi-5.40.0, libc6 (>= 2.4), libsombok3 (>= 2.3.1-1~), libmime-charset-perl (>= 1.006.2)
Description: UAX #14 Unicode Line Breaking Algorithm
 Unicode::LineBreak performs Line Breaking Algorithm described in Unicode
 Standards Annex #14 [UAX #14]. East_Asian_Width informative properties
 defined by Annex #11 [UAX #11] will be concerned to determine breaking
 positions.
Homepage: https://github.com/hatukanezumi/Unicode-LineBreak

Package: libunistring2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1807
Maintainer: Jörg Frings-Fürst <debian@jff.email>
Architecture: amd64
Multi-Arch: same
Source: libunistring
Version: 1.0-2
Depends: libc6 (>= 2.34)
Description: Unicode string library for C
 The 'libunistring' library implements Unicode strings (in the UTF-8,
 UTF-16, and UTF-32 encodings), together with functions for Unicode
 characters (character names, classifications, properties) and
 functions for string processing (formatted output, width, word
 breaks, line breaks, normalization, case folding, regular
 expressions).
 .
 This package contains the shared library.
Homepage: https://www.gnu.org/software/libunistring/

Package: libunistring5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2092
Maintainer: Jörg Frings-Fürst <debian@jff.email>
Architecture: amd64
Multi-Arch: same
Source: libunistring
Version: 1.3-2
Depends: libc6 (>= 2.34)
Description: Unicode string library for C
 The 'libunistring' library implements Unicode strings (in the UTF-8,
 UTF-16, and UTF-32 encodings), together with functions for Unicode
 characters (character names, classifications, properties) and
 functions for string processing (formatted output, width, word
 breaks, line breaks, normalization, case folding, regular
 expressions).
 .
 This package contains the shared library.
Homepage: https://www.gnu.org/software/libunistring/

Package: liburcu8t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 363
Maintainer: Jon Bernard <jbernard@debian.org>
Architecture: amd64
Multi-Arch: same
Source: liburcu
Version: 0.15.2-2
Replaces: liburcu8
Provides: liburcu8 (= 0.15.2-2)
Depends: libc6 (>= 2.38)
Breaks: liburcu8 (<< 0.15.2-2)
Description: userspace RCU (read-copy-update) library
 This data synchronization library provides read-side access which scales
 linearly with the number of cores. It does so by allowing multiples copies of
 a given data structure to live at the same time, and by monitoring the data
 structure accesses to detect grace periods after which memory reclamation is
 possible.
Homepage: https://liburcu.org/

Package: liburi-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 283
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 5.30-1
Depends: perl:any, libencode-perl, libscalar-list-utils-perl
Suggests: libbusiness-isbn-perl, libmime-base32-perl, libregexp-ipv6-perl, libwww-perl
Breaks: sqitch (<< 1.3.1-2~)
Description: module to manipulate and access URI strings
 URI is a collection of Perl modules that represent and manipulate Uniform
 Resource Identifier (URI) references as specified in RFC 2396.
 .
 URI objects can be used to access and manipulate the various components
 that make up these strings.  There are also methods to combine URIs in
 various ways.
 .
 The URI class replaces the URI::URL class that used to be distributed with
 libwww-perl. This package also includes an emulation of the old URI::URL
 interface, which implements both the old and the new interface.
Homepage: https://metacpan.org/release/URI

Package: liburing2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 117
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: amd64
Multi-Arch: same
Source: liburing
Version: 2.9-1
Depends: libc6 (>= 2.4)
Description: Linux kernel io_uring access library - shared library
 This library provides helpers to setup and teardown io_uring instances,
 and also a simplified interface for applications that do not need (or
 want) to deal with the full kernel side implementation.
 .
 This package contains the shared library.
Homepage: https://github.com/axboe/liburing

Package: libusb-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 157
Maintainer: Aurelien Jarno <aurel32@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libusb-1.0
Version: 2:1.0.28-1
Depends: libc6 (>= 2.38), libudev1 (>= 183)
Description: userspace USB programming library
 Library for programming USB applications without the knowledge
 of Linux kernel internals.
 .
 This package contains what you need to run programs that use this
 library.
Homepage: http://www.libusb.info

Package: libutempter0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 50
Maintainer: Christian Göttsche <cgzones@googlemail.com>
Architecture: amd64
Multi-Arch: same
Source: libutempter
Version: 1.2.1-4
Depends: libc6 (>= 2.34)
Description: privileged helper for utmp/wtmp updates (runtime)
 The libutempter library provides interface for terminal emulators such as
 screen and xterm to record user sessions to utmp and wtmp files.
 .
 The utempter is a privileged helper used by libutempter library to manipulate
 utmp and wtmp files.
Homepage: https://git.altlinux.org/people/ldv/packages/?p=libutempter.git

Package: libuuid1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 98
Maintainer: Chris Hofstaedtler <zeha@debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.41.5-0+deb13u1
Replaces: libuuid1t64
Provides: libuuid1t64 (= 2.41.5-0+deb13u1)
Depends: libc6 (>= 2.38)
Suggests: uuid-runtime
Breaks: libuuid1t64 (<< 2.41.5-0+deb13u1)
Description: Universally Unique ID library
 The libuuid library generates and parses 128-bit Universally Unique
 IDs (UUIDs). A UUID is an identifier that is unique within the space
 of all such identifiers across both space and time. It can be used for
 multiple purposes, from tagging objects with an extremely short lifetime
 to reliably identifying very persistent objects across a network.
 .
 See RFC 4122 for more information.
Homepage: https://github.com/util-linux/util-linux

Package: libuutil3linux
Status: install ok installed
Priority: optional
Section: contrib/libs
Installed-Size: 156
Maintainer: Debian ZFS on Linux maintainers <pkg-zfsonlinux-devel@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: same
Source: zfs-linux
Version: 2.3.9-0+deb13u1
Replaces: libuutil1, libuutil3
Depends: libc6 (>= 2.38)
Breaks: libuutil1, libuutil3
Description: Solaris userland utility library for Linux
 This library provides a variety of glue functions for ZFS on Linux:
  * libspl: The Solaris Porting Layer userland library, which provides APIs
    that make it possible to run Solaris user code in a Linux environment
    with relatively minimal modification.
  * libavl: The Adelson-Velskii Landis balanced binary tree manipulation
    library.
  * libefi: The Extensible Firmware Interface library for GUID disk
    partitioning.
  * libshare: NFS, SMB, and iSCSI service integration for ZFS.
Homepage: https://zfsonlinux.org/

Package: libuv1t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 321
Maintainer: Dominique Dumont <dod@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libuv1
Version: 1.50.0-2
Replaces: libuv1
Provides: libuv1 (= 1.50.0-2)
Depends: libc6 (>= 2.38)
Breaks: libuv1 (<< 1.48.0-1.1)
Description: asynchronous event notification library - runtime library
 Libuv is the asynchronous library behind Node.js. Very similar to libevent or
 libev, it provides the main elements for event driven systems: watching and
 waiting for availability in a set of sockets, and some other events like timers
 or asynchronous messages. However, libuv also comes with some other extras
 like:
  * files watchers and asynchronous operations
  * a portable TCP and UDP API, as well as asynchronous DNS resolution
  * processes and threads management, and a portable inter-process
    communications mechanism, with pipes and work queues
  * a plugins mechanism for loading libraries dynamically
  * interface with external libraries that also need to access the I/O.
 .
 This package includes the dynamic library against which you can link
 your program.
Homepage: https://github.com/libuv/libuv

Package: libva-drm2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 44
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libva
Version: 2.22.0-3
Depends: libc6 (>= 2.34), libdrm2 (>= 2.4.60), libva2 (>= 2.22.0), libva2 (<< 2.22.0.1)
Description: Video Acceleration (VA) API for Linux -- DRM runtime
 Video Acceleration API (VA API) is a library ("libVA") and API specification
 which enables and provides access to graphics hardware (GPU) acceleration for
 video processing on Linux and UNIX based operating systems. Accelerated
 processing includes video decoding, video encoding, subpicture blending and
 rendering. The specification was originally designed by Intel for its GMA
 (Graphics Media Accelerator) series of GPU hardware, the API is however not
 limited to GPUs or Intel specific hardware, as other hardware and manufacturers
 can also freely use this API for hardware accelerated video decoding.
 .
 This package provides the libva-drm library.
Homepage: https://github.com/intel/libva

Package: libva-x11-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 57
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libva
Version: 2.22.0-3
Depends: libc6 (>= 2.33), libdrm2 (>= 2.4.60), libva2 (>= 2.22.0), libva2 (<< 2.22.0.1), libx11-6 (>= 2:1.4.99.1), libx11-xcb1, libxcb-dri3-0, libxcb1, libxext6, libxfixes3
Description: Video Acceleration (VA) API for Linux -- X11 runtime
 Video Acceleration API (VA API) is a library ("libVA") and API specification
 which enables and provides access to graphics hardware (GPU) acceleration for
 video processing on Linux and UNIX based operating systems. Accelerated
 processing includes video decoding, video encoding, subpicture blending and
 rendering. The specification was originally designed by Intel for its GMA
 (Graphics Media Accelerator) series of GPU hardware, the API is however not
 limited to GPUs or Intel specific hardware, as other hardware and manufacturers
 can also freely use this API for hardware accelerated video decoding.
 .
 This package provides the libva-x11 library.
Homepage: https://github.com/intel/libva

Package: libva2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 250
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libva
Version: 2.22.0-3
Provides: libva-driver-abi-1.0, libva-driver-abi-1.17, libva-driver-abi-1.18, libva-driver-abi-1.19, libva-driver-abi-1.20, libva-driver-abi-1.21, libva-driver-abi-1.22, libva-driver-abi-1.8
Depends: libc6 (>= 2.38)
Recommends: va-driver-all | va-driver
Description: Video Acceleration (VA) API for Linux -- runtime
 Video Acceleration API (VA API) is a library ("libVA") and API specification
 which enables and provides access to graphics hardware (GPU) acceleration for
 video processing on Linux and UNIX based operating systems. Accelerated
 processing includes video decoding, video encoding, subpicture blending and
 rendering. The specification was originally designed by Intel for its GMA
 (Graphics Media Accelerator) series of GPU hardware, the API is however not
 limited to GPUs or Intel specific hardware, as other hardware and manufacturers
 can also freely use this API for hardware accelerated video decoding.
 .
 This package provides the main libva library.
Homepage: https://github.com/intel/libva

Package: libvdpau-va-gl1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 285
Maintainer: Vincent Bernat <bernat@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libvdpau-va-gl
Version: 0.4.2-2
Provides: vdpau-driver
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libgl1, libstdc++6 (>= 11), libva-x11-2 (>= 1.0.3), libva2 (>= 1.7.3), libx11-6, libvdpau1
Enhances: libvdpau1
Conffiles:
 /etc/X11/Xsession.d/20vdpau-va-gl 2048b94e02fb348cbedd187dfad63fbe
Description: VDPAU driver with OpenGL/VAAPI backend
 Many applications can use VDPAU to accelerate portions of the video
 decoding process and video post-processing to the GPU video
 hardware. Unfortunately, there is no such library for many graphic
 chipsets. Some applications also support VA-API but many of them,
 including Adobe Flash Player, don't.
 .
 This library proposes a generic VDPAU library. It uses OpenGL under
 the hood to accelerate drawing and scaling and VA-API (if available)
 to accelerate video decoding.
Homepage: https://github.com/i-rinat/libvdpau-va-gl

Package: libvdpau1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 111
Maintainer: Debian NVIDIA Maintainers <pkg-nvidia-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libvdpau (1.5-3)
Version: 1.5-3+b1
Depends: libc6 (>= 2.38), libx11-6 (>= 2:1.4.99.1), libxext6
Recommends: vdpau-driver-all | vdpau-driver
Conffiles:
 /etc/vdpau_wrapper.cfg bc89239208609c5d031b74c99a45747d
Description: Video Decode and Presentation API for Unix (libraries)
 VDPAU (Video Decode and Presentation API for Unix) is an open source
 library (libvdpau) and API designed by NVIDIA originally for its GeForce
 8 series and later GPU hardware, targeted at the X Window System on Unix
 operating-systems (including Linux, FreeBSD, and Solaris). This VDPAU API
 allows video programs to offload portions of the video decoding process
 and video post-processing to the GPU video-hardware.
 .
 This package contains the VDPAU wrapper and trace libraries.
Homepage: https://www.freedesktop.org/wiki/Software/VDPAU/

Package: libvidstab1.1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 99
Maintainer: Keng-Yu Lin <kengyu@lexical.tw>
Architecture: amd64
Multi-Arch: same
Source: libvidstab (1.1.0-2)
Version: 1.1.0-2+b2
Depends: libc6 (>= 2.29), libgomp1 (>= 4.9)
Description: video stabilization library (shared library)
 Imagine you captured a nice video with your camcorder, compact camera or
 even cell phone while skiing, cycling or whatever sports and the video is
 basically just jiggled.
 .
 Modern cameras come along with hardware stabilisation, however this does
 not work if you have really strong vibrations - rather the contrary -
 sometimes this mechanism starts to oscillate.
 .
 Vid.Stab is your friend in this matter. It is designed to stabilize even
 strongly jiggled clips.
 .
 This package contains the shared library.
Homepage: http://public.hronopik.de/vid.stab/

Package: libvorbis0a
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 208
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libvorbis
Version: 1.3.7-3
Depends: libc6 (>= 2.29), libogg0 (>= 1.1.0)
Description: decoder library for Vorbis General Audio Compression Codec
 Ogg Vorbis is a fully open, non-proprietary, patent-and-royalty-free,
 general-purpose compressed audio format for audio and music at fixed
 and variable bitrates from 16 to 128 kbps/channel.
 .
 The Vorbis library is the primary Ogg Vorbis library.
Homepage: https://www.xiph.org/vorbis/

Package: libvorbisenc2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 698
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libvorbis
Version: 1.3.7-3
Depends: libc6 (>= 2.4), libvorbis0a (= 1.3.7-3)
Description: encoder library for Vorbis General Audio Compression Codec
 Ogg Vorbis is a fully open, non-proprietary, patent-and-royalty-free,
 general-purpose compressed audio format for audio and music at fixed
 and variable bitrates from 16 to 128 kbps/channel.
 .
 The Vorbisenc library provides a convenient API for setting up an encoding
 environment using libvorbis.
Homepage: https://www.xiph.org/vorbis/

Package: libvorbisfile3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 58
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libvorbis
Version: 1.3.7-3
Depends: libc6 (>= 2.14), libogg0 (>= 1.1.0), libvorbis0a (= 1.3.7-3)
Description: high-level API for Vorbis General Audio Compression Codec
 Ogg Vorbis is a fully open, non-proprietary, patent-and-royalty-free,
 general-purpose compressed audio format for audio and music at fixed
 and variable bitrates from 16 to 128 kbps/channel.
 .
 The Vorbisfile library provides a convenient high-level API for decoding
 and basic manipulation of all Vorbis-I audio streams.
Homepage: https://www.xiph.org/vorbis/

Package: libvpl2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 415
Maintainer: Timo Aaltonen <tjaalton@debian.org>
Architecture: amd64
Source: libvpl (1:2.14.0-1)
Version: 1:2.14.0-1+b1
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.0), libstdc++6 (>= 11)
Description: Intel Video Processing Library -- shared library
 Intel Video Processing Library (Intel VPL) provides access to hardware
 accelerated video decode, encode, and processing capabilities on Intel
 GPUs to support AI visual inference, media delivery, cloud gaming, and virtual
 desktop infrastructure use cases.
 .
 This repository contains the following components:
 .
  - Copies of the Intel® VPL API header files
  - Intel VPL Dispatcher
  - Examples demonstrating API usage
 .
 This package includes the dispatcher library.
Homepage: https://github.com/intel/libvpl

Package: libvpx7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3061
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libvpx
Version: 1.12.0-1+deb12u5
Depends: libc6 (>= 2.34)
Description: VP8 and VP9 video codec (shared library)
 VP8 and VP9 are open video codecs, originally developed by On2 and released
 as open source by Google Inc. They are the successor of the VP3 codec,
 on which the Theora codec was based.
 .
 This package contains the shared libraries.
Homepage: https://www.webmproject.org

Package: libvpx9
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3545
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libvpx
Version: 1.15.0-2.1+deb13u1
Depends: libc6 (>= 2.34)
Description: VP8 and VP9 video codec (shared library)
 VP8 and VP9 are open video codecs, originally developed by On2 and released
 as open source by Google Inc. They are the successor of the VP3 codec,
 on which the Theora codec was based.
 .
 This package contains the shared libraries.
Homepage: https://www.webmproject.org

Package: libvulkan1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 555
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: vulkan-loader
Version: 1.4.309.0-1
Replaces: libvulkan-dev (<< 1.1.70+dfsg1-2), vulkan-loader
Depends: libc6 (>= 2.38)
Recommends: mesa-vulkan-drivers | vulkan-icd
Breaks: libvulkan-dev (<< 1.1.70+dfsg1-2), vulkan-loader
Description: Vulkan loader library
 The Loader implements the main VK library. It handles layer management and
 driver management. The loader fully supports multi-gpu operation. As part of
 this, it dispatches API calls to the correct driver, and to the correct
 layers, based on the GPU object selected by the application.
 .
 This package includes the loader library.
Homepage: https://github.com/KhronosGroup/Vulkan-Loader

Package: libwayland-client0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 94
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: wayland
Version: 1.23.1-3
Depends: libc6 (>= 2.38), libffi8 (>= 3.4)
Description: wayland compositor infrastructure - client library
 Wayland is a protocol for a compositor to talk to its clients as well
 as a C library implementation of that protocol. The compositor can be
 a standalone display server running on Linux kernel modesetting and
 evdev input devices, an X application, or a wayland client
 itself. The clients can be traditional applications, X servers
 (rootless or fullscreen) or other display servers.
 .
 This package ships the library that implements the client side of
 the Wayland protocol.
Homepage: https://wayland.freedesktop.org/

Package: libwayland-cursor0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 51
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: wayland
Version: 1.23.1-3
Depends: libc6 (>= 2.28), libwayland-client0 (>= 1.20.0)
Description: wayland compositor infrastructure - cursor library
 Wayland is a protocol for a compositor to talk to its clients as well
 as a C library implementation of that protocol. The compositor can be
 a standalone display server running on Linux kernel modesetting and
 evdev input devices, an X application, or a wayland client
 itself. The clients can be traditional applications, X servers
 (rootless or fullscreen) or other display servers.
 .
 This package ships a helper library to manage cursors.
Homepage: https://wayland.freedesktop.org/

Package: libwayland-egl1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 30
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: wayland
Version: 1.23.1-3
Depends: libc6 (>= 2.2.5)
Description: wayland compositor infrastructure - EGL library
 Wayland is a protocol for a compositor to talk to its clients as well
 as a C library implementation of that protocol. The compositor can be
 a standalone display server running on Linux kernel modesetting and
 evdev input devices, an X application, or a wayland client
 itself. The clients can be traditional applications, X servers
 (rootless or fullscreen) or other display servers.
 .
 This package ships the library that implements the Wayland EGL platform
 of the Wayland protocol.
Homepage: https://wayland.freedesktop.org/

Package: libwayland-server0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 112
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: wayland
Version: 1.23.1-3
Depends: libc6 (>= 2.38), libffi8 (>= 3.4)
Description: wayland compositor infrastructure - server library
 Wayland is a protocol for a compositor to talk to its clients as well
 as a C library implementation of that protocol. The compositor can be
 a standalone display server running on Linux kernel modesetting and
 evdev input devices, an X application, or a wayland client
 itself. The clients can be traditional applications, X servers
 (rootless or fullscreen) or other display servers.
 .
 This package ships the library that implements the server side of
 the Wayland protocol.
Homepage: https://wayland.freedesktop.org/

Package: libwebp-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1800
Maintainer: Jeff Breidenbach <jab@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libwebp
Version: 1.5.0-0.1
Depends: libwebp7 (= 1.5.0-0.1), libwebpdemux2 (= 1.5.0-0.1), libwebpmux3 (= 1.5.0-0.1), libwebpdecoder3 (= 1.5.0-0.1), libsharpyuv-dev
Description: Lossy compression of digital photographic images (development files)
 Image Compression format, based on the VP8 codec.
 WebP uses the modern VP8 compression format to deliver efficient
 compression of images for the web. More than 30% extra gain over
 optimized JPEG, for same quality, is not unusual.
Homepage: https://developers.google.com/speed/webp/

Package: libwebp7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 631
Maintainer: Jeff Breidenbach <jab@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libwebp
Version: 1.5.0-0.1
Depends: libc6 (>= 2.34), libsharpyuv0 (>= 1.5.0)
Description: Lossy compression of digital photographic images (shared library)
 Image Compression format, based on the VP8 codec.
 WebP uses the modern VP8 compression format to deliver efficient
 compression of images for the web. More than 30% extra gain over
 optimized JPEG, for same quality, is not unusual.
Homepage: https://developers.google.com/speed/webp/

Package: libwebpdecoder3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 391
Maintainer: Jeff Breidenbach <jab@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libwebp
Version: 1.5.0-0.1
Depends: libc6 (>= 2.34)
Description: Library for the WebP graphics format (decode only)
 This package provides the decoder functions for the WebP
 graphics format as a shared library.
Homepage: https://developers.google.com/speed/webp/

Package: libwebpdemux2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 139
Maintainer: Jeff Breidenbach <jab@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libwebp
Version: 1.5.0-0.1
Depends: libc6 (>= 2.14), libwebp7 (>= 1.5.0)
Description: Lossy compression of digital photographic images (libwebpdemux library)
 Image Compression format, based on the VP8 codec.
 WebP uses the modern VP8 compression format to deliver efficient
 compression of images for the web. More than 30% extra gain over
 optimized JPEG, for same quality, is not unusual.
Homepage: https://developers.google.com/speed/webp/

Package: libwebpmux3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 171
Maintainer: Jeff Breidenbach <jab@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libwebp
Version: 1.5.0-0.1
Depends: libc6 (>= 2.29), libwebp7 (>= 1.5.0)
Description: Lossy compression of digital photographic images (libwebpmux library)
 Image Compression format, based on the VP8 codec.
 WebP uses the modern VP8 compression format to deliver efficient
 compression of images for the web. More than 30% extra gain over
 optimized JPEG, for same quality, is not unusual.
Homepage: https://developers.google.com/speed/webp/

Package: libwmflite-0.2-7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 202
Maintainer: Yangfl <mmyangfl@gmail.com>
Architecture: amd64
Multi-Arch: same
Source: libwmf (0.2.13-1.1)
Version: 0.2.13-1.1+b3
Replaces: libwmf0.2-7 (<< 0.2.12-1)
Depends: libc6 (>= 2.14)
Breaks: libwmf0.2-7 (<< 0.2.12-1)
Description: Windows metafile conversion lite library
 Windows metafile (WMF) is a picture format used by many Windows
 programs, e.g. Microsoft Word.  libwmf is a library for interpreting
 metafile images and either displaying them using X or converting them
 to standard formats such as PNG, JPEG, PS, EPS and SVG(Z)...
 .
 This package contains the lite library.
Homepage: http://wvware.sourceforge.net/libwmf.html

Package: libwrap0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 110
Maintainer: Marco d'Itri <md@linux.it>
Architecture: amd64
Multi-Arch: same
Source: tcp-wrappers
Version: 7.6.q-36
Depends: libc6 (>= 2.33)
Description: Wietse Venema's TCP wrappers library
 Wietse Venema's network logger, also known as TCPD or LOG_TCP.
 .
 These programs log the client host name of incoming telnet,
 ftp, rsh, rlogin, finger etc. requests.
 .
 Security options are:
  - access control per host, domain and/or service;
  - detection of host name spoofing or host address spoofing;
  - booby traps to implement an early-warning system.

Package: libwtmpdb0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 50
Maintainer: Andrew Bower <andrew@bower.uk>
Architecture: amd64
Multi-Arch: same
Source: wtmpdb
Version: 0.73.0-3+deb13u1
Depends: libc6 (>= 2.38), libsqlite3-0 (>= 3.5.9)
Conffiles:
 /etc/logrotate.d/wtmpdb a55e14a8c5b9889d799ae2a29578ba86
Description: wtmp database shared library
 Year 2038-safe wtmp database implementation, library files.
 .
 This library provides an abstraction for reading and manipulating
 wtmpdb login and reboot records.
Homepage: https://github.com/thkukuk/wtmpdb/

Package: libwww-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 416
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 6.78-1
Depends: perl:any, ca-certificates, libencode-locale-perl, libfile-listing-perl, libhtml-parser-perl, libhtml-tagset-perl, libhtml-tree-perl, libhttp-cookies-perl, libhttp-date-perl, libhttp-message-perl, libhttp-negotiate-perl, liblwp-mediatypes-perl, liblwp-protocol-https-perl, libnet-http-perl, libtry-tiny-perl, liburi-perl, libwww-robotrules-perl, netbase
Recommends: libdata-dump-perl, libhtml-form-perl, libhtml-format-perl, libhttp-daemon-perl, libmailtools-perl
Suggests: libauthen-ntlm-perl
Description: simple and consistent interface to the world-wide web
 libwww-perl (also known as LWP) is a collection of Perl modules that provide
 a simple and consistent programming interface (API) to the World-Wide Web.
 The main focus of the library is to provide classes and functions that allow
 you to write WWW clients. It also contains general purpose modules, as well
 as a simple HTTP/1.1-compatible server implementation.
Homepage: https://metacpan.org/release/libwww-perl

Package: libwww-robotrules-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 36
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 6.02-1
Replaces: libwww-perl (<< 6.00)
Depends: perl, liburi-perl
Breaks: libwww-perl (<< 6.00)
Description: database of robots.txt-derived permissions
 WWW::RobotRules parses /robots.txt files as specified in "A Standard for
 Robot Exclusion", at <http://www.robotstxt.org/wc/norobots.html>. Webmasters
 can use the /robots.txt file to forbid conforming robots from accessing parts
 of their web site.
 .
 The parsed files are kept in a WWW::RobotRules object, and this object
 provides methods to check if access to a given URL is prohibited. The same
 WWW::RobotRules object can be used for one or more parsed /robots.txt files
 on any number of hosts.
Homepage: https://metacpan.org/release/WWW-RobotRules

Package: libx11-6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1638
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libx11
Version: 2:1.8.12-1
Depends: libc6 (>= 2.38), libxcb1 (>= 1.11.1), libx11-data
Breaks: libx11-xcb1 (<< 2:1.7.0-2)
Description: X11 client-side library
 This package provides a client interface to the X Window System, otherwise
 known as 'Xlib'.  It provides a complete API for the basic functions of the
 window system.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 https://gitlab.freedesktop.org/xorg/lib/libX11

Package: libx11-data
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 1576
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: libx11
Version: 2:1.8.12-1
Description: X11 client-side library
 This package provides the locale data files for libx11.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 https://gitlab.freedesktop.org/xorg/lib/libX11

Package: libx11-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2730
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libx11
Version: 2:1.8.12-1
Replaces: x11proto-dev (<< 2019.2)
Depends: libx11-6 (= 2:1.8.12-1), libxau-dev, libxdmcp-dev, x11proto-dev (>= 2019.2-1), xtrans-dev, libxcb1-dev
Suggests: libx11-doc
Description: X11 client-side library (development headers)
 This package provides a client interface to the X Window System, otherwise
 known as 'Xlib'.  It provides a complete API for the basic functions of the
 window system.
 .
 This package contains the development headers for the library found in
 libx11-6. Non-developers likely have little use for this package.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 https://gitlab.freedesktop.org/xorg/lib/libX11

Package: libx11-protocol-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 459
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.56-9
Depends: perl:any
Recommends: perl | libio-socket-ip-perl
Description: Perl module for the X Window System Protocol, version 11
 X11::Protocol is a client-side interface to the X11 Protocol (see X(1) for
 information about X11), allowing perl programs to display windows and
 graphics on X11 servers.
Homepage: https://metacpan.org/release/X11-Protocol

Package: libx11-xcb1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 306
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libx11
Version: 2:1.8.12-1
Depends: libx11-6 (= 2:1.8.12-1)
Description: Xlib/XCB interface library
 libX11-xcb provides functions needed by clients which take advantage of
 Xlib/XCB to mix calls to both Xlib and XCB over the same X connection.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 More information about XCB can be found at:
 <URL:https://xcb.freedesktop.org>
 .
 This module can be found at
 https://gitlab.freedesktop.org/xorg/lib/libX11

Package: libx264-164
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1918
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: x264 (2:0.164.3108+git31e19f9-2)
Version: 2:0.164.3108+git31e19f9-2+b1
Depends: libc6 (>= 2.38)
Description: x264 video coding library
 libx264 is an advanced encoding library for creating H.264 (MPEG-4 AVC)
 video streams.
 .
 This package contains the libx264 shared library.
Homepage: https://www.videolan.org/developers/x264.html

Package: libx265-199
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 16203
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: x265 (3.5-2)
Version: 3.5-2+b1
Depends: libc6 (>= 2.34), libnuma1 (>= 2.0.11), libstdc++6 (>= 4.1.1)
Description: H.265/HEVC video stream encoder (shared library)
 libx265 is an encoding library for creating H.265/High Efficiency Video Coding
 (HEVC) video streams.
 .
 This package contains the shared library.
Homepage: http://x265.org

Package: libx265-215
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 16788
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: x265
Version: 4.1-2
Depends: libc6 (>= 2.38), libnuma1 (>= 2.0.11), libstdc++6 (>= 4.1.1)
Description: H.265/HEVC video stream encoder (shared library)
 libx265 is an encoding library for creating H.265/High Efficiency Video Coding
 (HEVC) video streams.
 .
 This package contains the shared library.
Homepage: https://bitbucket.org/multicoreware/x265_git

Package: libx265-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 22522
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: x265
Version: 4.1-2
Depends: libx265-215 (= 4.1-2)
Suggests: libx265-doc
Description: H.265/HEVC video stream encoder (development files)
 libx265 is an encoding library for creating H.265/High Efficiency Video Coding
 (HEVC) video streams.
 .
 This is the development package which contains headers and libraries for
 libx265.
Homepage: https://bitbucket.org/multicoreware/x265_git

Package: libxau-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 65
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxau
Version: 1:1.0.11-1
Depends: libxau6 (= 1:1.0.11-1), x11proto-dev
Description: X11 authorisation library (development headers)
 This package provides the main interface to the X11 authorisation handling,
 which controls authorisation for X connections, both client-side and
 server-side.
 .
 This package contains the development headers for the library found in libxau6.
 Non-developers likely have little use for this package.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 https://gitlab.freedesktop.org/xorg/lib/libxau

Package: libxau6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 42
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxau
Version: 1:1.0.11-1
Depends: libc6 (>= 2.33)
Description: X11 authorisation library
 This package provides the main interface to the X11 authorisation handling,
 which controls authorisation for X connections, both client-side and
 server-side.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 https://gitlab.freedesktop.org/xorg/lib/libxau

Package: libxaw7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 534
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxaw
Version: 2:1.0.16-1
Depends: libc6 (>= 2.34), libx11-6, libxext6, libxmu6 (>= 2:1.1.3), libxpm4, libxt6t64
Description: X11 Athena Widget library
 libXaw7 provides the second version of Xaw, the Athena Widgets toolkit,
 which is largely used by legacy X applications.  This version is the
 most common version, as version 6 is considered deprecated, and version
 8, which adds Xprint support, is unsupported and not widely used.
 In general, use of a more modern toolkit such as GTK+ is recommended.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXaw

Package: libxcb-dri2-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 137
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxcb (1.17.0-2)
Version: 1.17.0-2+b1
Depends: libc6 (>= 2.4), libxcb1
Description: X C Binding, dri2 extension
 This package contains the library files needed to run software using
 libxcb-dri2, the dri2 extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org

Package: libxcb-dri3-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 137
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxcb (1.17.0-2)
Version: 1.17.0-2+b1
Depends: libc6 (>= 2.4), libxcb1 (>= 1.12)
Description: X C Binding, dri3 extension
 This package contains the library files needed to run software using
 libxcb-dri3, the dri3 extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org

Package: libxcb-glx0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 249
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxcb (1.17.0-2)
Version: 1.17.0-2+b1
Depends: libc6 (>= 2.4), libxcb1
Description: X C Binding, glx extension
 This package contains the library files needed to run software using
 libxcb-glx, the glx extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org

Package: libxcb-present0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 128
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxcb (1.17.0-2)
Version: 1.17.0-2+b1
Depends: libc6 (>= 2.4), libxcb1
Description: X C Binding, present extension
 This package contains the library files needed to run software using
 libxcb-present, the present extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org

Package: libxcb-randr0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 197
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxcb (1.17.0-2)
Version: 1.17.0-2+b1
Depends: libc6 (>= 2.4), libxcb1 (>= 1.9.2)
Description: X C Binding, randr extension
 This package contains the library files needed to run software using
 libxcb-randr, the randr extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org

Package: libxcb-render0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 181
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxcb (1.17.0-2)
Version: 1.17.0-2+b1
Depends: libc6 (>= 2.14), libxcb1 (>= 1.8)
Description: X C Binding, render extension
 This package contains the library files needed to run software using
 libxcb-render, the render extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org

Package: libxcb-shape0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 128
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxcb (1.17.0-2)
Version: 1.17.0-2+b1
Depends: libc6 (>= 2.4), libxcb1
Description: X C Binding, shape extension
 This package contains the library files needed to run software using
 libxcb-shape, the shape extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org

Package: libxcb-shm0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 127
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxcb (1.17.0-2)
Version: 1.17.0-2+b1
Depends: libc6 (>= 2.4), libxcb1 (>= 1.12)
Description: X C Binding, shm extension
 This package contains the library files needed to run software using
 libxcb-shm, the shm extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org

Package: libxcb-sync1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 150
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxcb (1.17.0-2)
Version: 1.17.0-2+b1
Depends: libc6 (>= 2.14), libxcb1
Description: X C Binding, sync extension
 This package contains the library files needed to run software using
 libxcb-sync, the sync extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org

Package: libxcb-xfixes0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 152
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxcb (1.17.0-2)
Version: 1.17.0-2+b1
Depends: libc6 (>= 2.4), libxcb1
Description: X C Binding, xfixes extension
 This package contains the library files needed to run software using
 libxcb-xfixes, the xfixes extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org

Package: libxcb1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 301
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxcb (1.17.0-2)
Version: 1.17.0-2+b1
Depends: libc6 (>= 2.38), libxau6 (>= 1:1.0.9), libxdmcp6
Description: X C Binding
 This package contains the library files needed to run software using libxcb,
 the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org

Package: libxcb1-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 779
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxcb (1.17.0-2)
Version: 1.17.0-2+b1
Depends: libxcb1 (= 1.17.0-2+b1), libxau-dev, libxdmcp-dev
Suggests: libxcb-doc
Description: X C Binding, development files
 This package contains the header and library files needed to build software
 using libxcb, the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org

Package: libxcomposite1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 39
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxcomposite
Version: 1:0.4.6-1
Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.4.99.1)
Description: X11 Composite extension library
 libXcomposite provides an X Window System client interface to the Composite
 extension to the X protocol.
 .
 The Composite extension allows clients called compositing managers to control
 the final drawing of the screen.  Rendering is done into an off-screen buffer.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXcomposite

Package: libxcursor1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 81
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxcursor
Version: 1:1.2.3-1
Depends: libc6 (>= 2.38), libx11-6 (>= 2:1.4.99.1), libxfixes3, libxrender1
Description: X cursor management library
 Xcursor is a simple library designed to help locate and load cursors for the
 X Window System.  Cursors can be loaded from files or memory and can exist in
 several sizes; the library automatically picks the best size.  When using
 images loaded from files, Xcursor prefers to use the Render extension's
 CreateCursor request for rendering cursors.  Where the Render extension is
 not supported, Xcursor maps the cursor image to a standard X cursor and uses
 the core X protocol CreateCursor request.
 .
 Preferred themes for cursors can be installed if desired, via
 xcursor-themes or other cursor-theme or icon-theme packages,
 configured with update-alternatives --config x-cursor-theme.
Homepage: https://www.x.org

Package: libxdmcp-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 85
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxdmcp
Version: 1:1.1.5-1
Depends: libxdmcp6 (= 1:1.1.5-1), x11proto-dev
Description: X11 authorisation library (development headers)
 This package provides the main interface to the X11 display manager control
 protocol library, which allows for remote logins to display managers.
 .
 This package contains the development headers for the library found in
 libxdmcp6. Non-developers likely have little use for this package.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 https://gitlab.freedesktop.org/xorg/lib/libXdmcp

Package: libxdmcp6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 59
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxdmcp
Version: 1:1.1.5-1
Depends: libc6 (>= 2.36)
Description: X11 Display Manager Control Protocol library
 This package provides the main interface to the X11 display manager control
 protocol library, which allows for remote logins to display managers.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 https://gitlab.freedesktop.org/xorg/lib/libXdmcp

Package: libxext-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 329
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxext (2:1.3.4-1)
Version: 2:1.3.4-1+b3
Depends: libxext6 (= 2:1.3.4-1+b3), x11proto-dev, libx11-dev
Suggests: libxext-doc
Description: X11 miscellaneous extensions library (development headers)
 libXext provides an X Window System client interface to several extensions to
 the X protocol.
 .
 The supported protocol extensions are:
  - DOUBLE-BUFFER (DBE), the Double Buffer extension;
  - DPMS, the VESA Display Power Management System extension;
  - Extended-Visual-Information (EVI), an extension for gathering extra
    information about the X server's visuals;
  - LBX, the Low Bandwidth X extension;
  - MIT-SHM, the MIT X client/server shared memory extension;
  - MIT-SUNDRY-NONSTANDARD, a miscellaneous extension by MIT;
  - Multi-Buffering, the multi-buffering and stereo display extension;
  - SECURITY, the X security extension;
  - SHAPE, the non-rectangular shaped window extension;
  - SYNC, the X synchronization extension;
  - TOG-CUP, the Open Group's Colormap Utilization extension;
  - XC-APPGROUP, the X Consortium's Application Group extension;
  - XC-MISC, the X Consortium's resource ID querying extension;
  - XTEST, the X test extension (this is one of two client-side
    implementations; the other is in the libXtst library, provided by the
    libxtst6 package);
 .
 libXext also provides a small set of utility functions to aid authors of
 client APIs for X protocol extensions.
 .
 This package contains the development headers for the library found in
 libxext6. Non-developers likely have little use for this package.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXext

Package: libxext6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 129
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxext (2:1.3.4-1)
Version: 2:1.3.4-1+b3
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0)
Description: X11 miscellaneous extension library
 libXext provides an X Window System client interface to several extensions to
 the X protocol.
 .
 The supported protocol extensions are:
  - DOUBLE-BUFFER (DBE), the Double Buffer extension;
  - DPMS, the VESA Display Power Management System extension;
  - Extended-Visual-Information (EVI), an extension for gathering extra
    information about the X server's visuals;
  - LBX, the Low Bandwidth X extension;
  - MIT-SHM, the MIT X client/server shared memory extension;
  - MIT-SUNDRY-NONSTANDARD, a miscellaneous extension by MIT;
  - Multi-Buffering, the multi-buffering and stereo display extension;
  - SECURITY, the X security extension;
  - SHAPE, the non-rectangular shaped window extension;
  - SYNC, the X synchronization extension;
  - TOG-CUP, the Open Group's Colormap Utilization extension;
  - XC-APPGROUP, the X Consortium's Application Group extension;
  - XC-MISC, the X Consortium's resource ID querying extension;
  - XTEST, the X test extension (this is one of two client-side
    implementations; the other is in the libXtst library, provided by the
    libxtst6 package);
 .
 libXext also provides a small set of utility functions to aid authors of
 client APIs for X protocol extensions.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXext

Package: libxfixes3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 55
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxfixes (1:6.0.0-2)
Version: 1:6.0.0-2+b4
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0)
Description: X11 miscellaneous 'fixes' extension library
 libXfixes provides an X Window System client interface to the 'XFIXES'
 extension to the X protocol.
 .
 It provides support for Region types, and some cursor functions.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXfixes

Package: libxft2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 131
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: xft (2.3.6-1)
Version: 2.3.6-1+b4
Depends: libc6 (>= 2.14), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.3.5), libx11-6, libxrender1
Description: FreeType-based font drawing library for X
 Xft provides a client-side font API for X applications, making the FreeType
 font rasterizer available to X clients.  Fontconfig is used for font
 specification resolution.  Where available, the RENDER extension handles
 glyph drawing; otherwise, the core X protocol is used.

Package: libxi6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 143
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxi
Version: 2:1.8.2-1
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0), libxext6
Description: X11 Input extension library
 libXi provides an X Window System client interface to the XINPUT
 extension to the X protocol.
 .
 The Input extension allows setup and configuration of multiple input devices,
 and hotplugging of input devices (to be added and removed on the fly).
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXi
Homepage: https://www.x.org/

Package: libxinerama1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 42
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxinerama (2:1.1.4-3)
Version: 2:1.1.4-3+b4
Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.6.0), libxext6
Description: X11 Xinerama extension library
 libXinerama provides an X Window System client interface to the XINERAMA
 extension to the X protocol.
 .
 The Xinerama (also known as panoramiX) extension allows for multiple screens
 attached to a single display to be treated as belonging together, and to give
 desktop applications a better idea of the monitor layout.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXinerama

Package: libxkbcommon0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 317
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxkbcommon
Version: 1.7.0-2
Depends: xkb-data, libc6 (>= 2.38)
Description: library interface to the XKB compiler - shared library
 This package provides a library to handle keyboard descriptions, including
 loading them from disk, parsing them and handling their state. It's mainly
 meant for client toolkits, window systems, and other system applications;
 currently that includes Wayland, kmscon, GTK+, Clutter, and more.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 https://github.com/xkbcommon/libxkbcommon.git
Homepage: https://www.xkbcommon.org/

Package: libxkbfile1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 187
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxkbfile (1:1.1.0-1)
Version: 1:1.1.0-1+b4
Depends: libc6 (>= 2.14), libx11-6
Description: X11 keyboard file manipulation library
 libxkbfile provides an interface to read and manipulate description files for
 XKB, the X11 keyboard configuration extension.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libxkbfile

Package: libxml-parser-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 684
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Version: 2.47-2~deb13u1
Depends: perl (>= 5.40.1-6), perlapi-5.40.1, libc6 (>= 2.14), libexpat1 (>= 2.0.1), liburi-perl, libwww-perl
Description: Perl module for parsing XML files
 The XML::Parser module provides ways to parse XML documents.  It is built on
 top of XML::Parser::Expat, which is a lower level interface to James Clark's
 expat library. Each call to one of the parsing methods creates a new instance
 of XML::Parser::Expat which is then used to parse the document. Expat options
 may be provided when the XML::Parser object is created. These options are
 then passed on to the Expat object on each parse call. They can also be given
 as extra arguments to the parse methods, in which case they override options
 given at XML::Parser creation time.
 .
 The behavior of the parser is controlled either by Style and/or Handlers
 options, or by setHandlers method. These all provide mechanisms for
 XML::Parser to set the handlers needed by XML::Parser::Expat. If neither
 Style nor Handlers are specified, then parsing just checks the document for
 being well-formed.
 .
 When underlying handlers get called, they receive as their first parameter
 the Expat object, not the Parser object.
Homepage: https://metacpan.org/release/XML-Parser

Package: libxml-twig-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 570
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 1:3.52-3
Depends: perl:any, libxml-parser-perl
Recommends: libhtml-parser-perl, libtext-iconv-perl, libtie-ixhash-perl, libwww-perl, libxml-xpathengine-perl | libxml-xpath-perl
Suggests: libunicode-map8-perl, libunicode-string-perl, xml-twig-tools
Description: Perl module for processing huge XML documents in tree mode
 The XML::Twig module provides a way to process XML documents.  It is built on
 top of XML::Parser.
 .
 The module offers a tree interface to the document, while allowing to
 output the parts of it that have been completely processed.
 .
 It allows minimal resource (CPU and memory) usage by building the
 tree only for the parts of the documents that need actual processing,
 through the use of the twig_roots and twig_print_outside_roots
 options.  The finish and finish_print methods also help to increase
 performance.
 .
 XML::Twig tries to make simple things easy so it tries its best to
 takes care of a lot of the (usually) annoying (but sometimes
 necessary) features that come with XML and XML::Parser.
Homepage: https://metacpan.org/release/XML-Twig

Package: libxml-xpathengine-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 129
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.14-2
Depends: perl:any
Description: re-usable XPath engine for DOM-like trees
 XML::XPathEngine provides an XPath engine, that can be re-used by other
 module/classes that implement trees.
 .
 In order to use the XPath engine, nodes in the user module need to mimic
 DOM nodes. The degree of similarity between the user tree and a DOM dictates
 how much of the XPath features can be used. A module implementing all of the
 DOM should be able to use this module very easily (you might need to add
 the cmp method on nodes in order to get ordered result sets).
 .
 This module is derived from Matt Sergeant's XML::XPath.
Homepage: https://metacpan.org/release/XML-XPathEngine

Package: libxml2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1916
Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Version: 2.12.7+dfsg+really2.9.14-2.1+deb13u3
Depends: libc6 (>= 2.38), liblzma5 (>= 5.1.1alpha+20120614), zlib1g (>= 1:1.2.3.4)
Conflicts: w3c-dtd-xhtml
Description: GNOME XML library
 XML is a metalanguage to let you design your own markup language.
 A regular markup language defines a way to describe information in
 a certain class of documents (eg HTML). XML lets you define your
 own customized markup languages for many classes of document. It
 can do this because it's written in SGML, the international standard
 metalanguage for markup languages.
 .
 This package provides a library providing an extensive API to handle
 such XML data files.
Homepage: http://xmlsoft.org

Package: libxml2-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 3364
Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxml2
Version: 2.12.7+dfsg+really2.9.14-2.1+deb13u3
Depends: libxml2 (= 2.12.7+dfsg+really2.9.14-2.1+deb13u3)
Suggests: pkg-config
Description: GNOME XML library - development files
 XML is a metalanguage to let you design your own markup language.
 A regular markup language defines a way to describe information in
 a certain class of documents (eg HTML). XML lets you define your
 own customized markup languages for many classes of document. It
 can do this because it's written in SGML, the international standard
 metalanguage for markup languages.
 .
 Install this package if you wish to develop your own programs using
 the GNOME XML library.
Homepage: http://xmlsoft.org

Package: libxmu6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 139
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxmu (2:1.1.3-3)
Version: 2:1.1.3-3+b4
Depends: libc6 (>= 2.14), libx11-6, libxext6, libxt6t64
Description: X11 miscellaneous utility library
 libXmu provides a set of miscellaneous utility convenience functions for X
 libraries to use.  libXmuu is a lighter-weight version that does not depend
 on libXt or libXext; for more information, see libxmuu1.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXmu

Package: libxmuu1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 53
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxmu (2:1.1.3-3)
Version: 2:1.1.3-3+b4
Depends: libc6 (>= 2.4), libx11-6
Description: X11 miscellaneous micro-utility library
 libXmuu provides a set of miscellaneous utility convenience functions for X
 libraries to use.  It is a lighter version of libXmu that does not depend
 on libXt or libXext; for more information on libXmu, see libxmu6.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXmu

Package: libxpm4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 113
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxpm
Version: 1:3.5.17-1+deb13u1
Depends: libc6 (>= 2.38), libx11-6
Description: X11 pixmap library
 The X PixMap image format is an extension of the monochrome X BitMap
 format specified in the X protocol, and is commonly used in traditional
 X applications.
 .
 This package provides runtime support for XPM format.
Homepage: https://www.x.org

Package: libxrandr2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 85
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxrandr (2:1.5.4-1)
Version: 2:1.5.4-1+b3
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0), libxext6, libxrender1
Description: X11 RandR extension library
 libXrandr provides an X Window System client interface to the RandR
 extension to the X protocol.
 .
 The RandR extension allows for run-time configuration of display attributes
 such as resolution, rotation, and reflection.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 https://gitlab.freedesktop.org/xorg/lib/libXrandr

Package: libxrender1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 72
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxrender
Version: 1:0.9.12-1
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0)
Description: X Rendering Extension client library
 The X Rendering Extension (Render) introduces digital image composition as
 the foundation of a new rendering model within the X Window System.
 Rendering geometric figures is accomplished by client-side tessellation into
 either triangles or trapezoids.  Text is drawn by loading glyphs into the
 server and rendering sets of them.  The Xrender library exposes this
 extension to X clients.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXrender

Package: libxshmfence1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 36
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxshmfence
Version: 1.3.3-1
Depends: libc6 (>= 2.38)
Description: X shared memory fences - shared library
 This library provides an interface to shared-memory fences for
 synchronization between the X server and direct-rendering clients.
 .
 This package contains the xshmfence shared library.
Homepage: https://gitlab.freedesktop.org/xorg/lib/libxshmfence

Package: libxslt1.1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 497
Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxslt
Version: 1.1.35-1.2+deb13u3
Depends: libc6 (>= 2.38), libgcrypt20 (>= 1.11.0), libxml2 (>= 2.9.0)
Description: XSLT 1.0 processing library - runtime library
 XSLT is an XML language for defining transformations of XML files from
 XML to some other arbitrary format, such as XML, HTML, plain text, etc.
 using standard XSLT stylesheets. libxslt is a C library which
 implements XSLT version 1.0.
 .
 This package contains the libxslt library used by applications for XSLT
 transformations.
Homepage: https://gitlab.gnome.org/GNOME/libxslt/-/wikis/home

Package: libxss1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 42
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxss (1:1.2.3-1)
Version: 1:1.2.3-1+b3
Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.4.99.1), libxext6, x11-common
Description: X11 Screen Saver extension library
 libXss provides an X Window System client interface to the MIT-SCREEN-SAVER
 extension to the X protocol.
 .
 The Screen Saver extension allows clients behaving as screen savers to
 register themselves with the X server, to better integrate themselves with
 the running session.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 https://gitlab.freedesktop.org/xorg/lib/libXScrnSaver

Package: libxt-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1398
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxt (1:1.2.1-1.2)
Version: 1:1.2.1-1.2+b2
Depends: libxt6t64 (= 1:1.2.1-1.2+b2), libx11-dev, x11proto-dev, libsm-dev
Suggests: libxt-doc
Description: X11 toolkit intrinsics library (development headers)
 libXt provides the X Toolkit Intrinsics, an abstract widget library upon
 which other toolkits are based.  Xt is the basis for many toolkits, including
 the Athena widgets (Xaw), and LessTif (a Motif implementation).
 .
 This package contains the development headers for the library found in
 libxt6.  Non-developers likely have little use for this package.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXt

Package: libxt6t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 490
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxt (1:1.2.1-1.2)
Version: 1:1.2.1-1.2+b2
Replaces: libxt6
Provides: libxt6 (= 1:1.2.1-1.2+b2)
Depends: libc6 (>= 2.33), libice6 (>= 1:1.0.0), libsm6, libx11-6
Breaks: libxt6 (<< 1:1.2.1-1.2)
Description: X11 toolkit intrinsics library
 libXt provides the X Toolkit Intrinsics, an abstract widget library upon
 which other toolkits are based.  Xt is the basis for many toolkits, including
 the Athena widgets (Xaw), and LessTif (a Motif implementation).
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXt

Package: libxtables12
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 101
Maintainer: Debian Netfilter Packaging Team <team+pkg-netfilter-team@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: iptables
Version: 1.8.11-2
Depends: libc6 (>= 2.34)
Description: netfilter xtables library
 The iptables/xtables framework has been replaced by nftables. You should
 consider migrating now.
 .
 However, even if a given system may be fully running on native nftables,
 there are other reasons why libxtables might be installed. For one, nftables
 itself uses it to be able to display old rulesets that were created using
 xtables extensions (to help folks migrate). Other third-party software might
 also be linked to this library.
 .
 This library being installed in the system should be harmless in any case.
 .
 This package contains the user-space interface to the Netfilter xtables
 kernel framework.
Homepage: https://www.netfilter.org/

Package: libxtst6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 59
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxtst
Version: 2:1.2.5-1
Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.6.0), libxext6, x11-common
Description: X11 Testing -- Record extension library
 libXtst provides an X Window System client interface to the Record
 extension to the X protocol.
 .
 The Record extension allows X clients to synthesise input events, which
 is useful for automated testing.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXtst

Package: libxv1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 52
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxv (2:1.0.11-1.1)
Version: 2:1.0.11-1.1+b3
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0), libxext6
Description: X11 Video extension library
 libXv provides an X Window System client interface to the XVideo
 extension to the X protocol.
 .
 The XVideo extension allows for accelerated drawing of videos.  Hardware
 adaptors are exposed to clients, which may draw in a number of colourspaces,
 including YUV.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXv

Package: libxvidcore4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 752
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: xvidcore (2:1.3.7-1)
Version: 2:1.3.7-1+b2
Depends: libc6 (>= 2.34)
Description: Open source MPEG-4 video codec (library)
 Xvid (formerly XviD) is an open source MPEG-4 video codec, implementing MPEG-4
 Simple Profile, Advanced Simple Profile, and Advanced Video Coding standards.
 It is written in C with assembler optimizations for quality and speed
 (including MMX, SSE, and 3Dnow! code for i386 and AltiVec for PowerPC), and is
 especially optimized towards offline, multi-pass compression for storage and
 archival purposes.
 .
 This package contains the shared library.
Homepage: https://labs.xvid.com/source/

Package: libxxf86dga1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 52
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxxf86dga (2:1.1.5-1)
Version: 2:1.1.5-1+b3
Depends: libc6 (>= 2.34), libx11-6 (>= 2:1.6.0), libxext6
Description: X11 Direct Graphics Access extension library
 libXxf86dga provides the XFree86-DGA extension, which allows direct
 graphics access to a framebuffer-like region, and also allows relative
 mouse reporting, et al.  It is mainly used by games and emulators for
 games.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 https://gitlab.freedesktop.org/xorg/lib/libXxf86dga

Package: libxxf86vm1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 48
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxxf86vm (1:1.1.4-1)
Version: 1:1.1.4-1+b4
Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.6.0), libxext6
Description: X11 XFree86 video mode extension library
 libXxf86vm provides an interface to the XFree86-VidModeExtension
 extension, which allows client applications to get and set video mode
 timings in extensive detail.  It is used by the xvidtune program in
 particular.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXxf86vm

Package: libxxhash0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 92
Maintainer: Josue Ortega <josue@debian.org>
Architecture: amd64
Multi-Arch: same
Source: xxhash
Version: 0.8.3-2
Depends: libc6 (>= 2.14)
Description: shared library for xxhash
 xxHash is an Extremely fast Hash algorithm, running at RAM speed limits.
 It successfully completes the SMHasher test suite which evaluates collision,
 dispersion and randomness qualities of hash functions. Code is highly portable,
 and hashes are identical on all platforms (little / big endian).
 .
 This package contains the shared library.
Homepage: https://cyan4973.github.io/xxHash

Package: libyaml-0-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 147
Maintainer: Florian Ernst <florian@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libyaml
Version: 0.2.5-2
Depends: libc6 (>= 2.14)
Description: Fast YAML 1.1 parser and emitter library
 LibYAML is a C library for parsing and emitting data in YAML 1.1, a
 human-readable data serialization format.
Homepage: https://github.com/yaml/libyaml

Package: libyuv0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 696
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libyuv
Version: 0.0.1904.20250204-1
Replaces: libyuv
Provides: libyuv
Depends: libc6 (>= 2.14), libgcc-s1 (>= 3.0), libjpeg62-turbo (>= 1.3.1), libstdc++6 (>= 5)
Conflicts: libyuv
Description: Library for YUV scaling (shared library)
 libyuv is an open source project that includes YUV scaling and
 conversion functionality.
 .
 This package provides the shared library.
Homepage: https://chromium.googlesource.com/libyuv/libyuv/

Package: libz3-4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 27142
Maintainer: LLVM Packaging Team <pkg-llvm-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: z3
Version: 4.13.3-1
Replaces: libz3-dev (<< 4.4.1)
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.4), libstdc++6 (>= 14)
Breaks: libz3-dev (<< 4.4.1)
Description: theorem prover from Microsoft Research - runtime libraries
 Z3 is a state-of-the-art theorem prover from Microsoft Research. It can be
 used to check the satisfiability of logical formulas over one or more
 theories. Z3 offers a compelling match for software analysis and verification
 tools, since several common software constructs map directly into supported
 theories.
 .
 This package contains runtime libraries. You shouldn't have to install it
 manually.
Homepage: https://github.com/Z3Prover/z3

Package: libzfs6linux
Status: install ok installed
Priority: optional
Section: contrib/libs
Installed-Size: 680
Maintainer: Debian ZFS on Linux maintainers <pkg-zfsonlinux-devel@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: same
Source: zfs-linux
Version: 2.3.9-0+deb13u1
Replaces: libzfs2, libzfs4, libzfs4linux
Depends: libblkid1 (>= 2.16), libc6 (>= 2.38), libnvpair3linux (>= 0.8.2), libssl3t64 (>= 3.0.0), libudev1 (>= 183), libuuid1 (>= 2.16), libuutil3linux (>= 0.8.2), zlib1g (>= 1:1.1.4)
Recommends: libcurl4
Breaks: libzfs2, libzfs4, libzfs4linux
Description: OpenZFS filesystem library for Linux - general support
 OpenZFS is a storage platform that encompasses the functionality of
 traditional filesystems and volume managers. It supports data checksums,
 compression, encryption, snapshots, and more.
 .
 The OpenZFS library provides support for managing OpenZFS filesystems.
Homepage: https://zfsonlinux.org/

Package: libzimg2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 881
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: zimg (3.0.5+ds1-1)
Version: 3.0.5+ds1-1+b2
Depends: libc6 (>= 2.32), libgcc-s1 (>= 3.0), libstdc++6 (>= 14)
Description: scaling, colorspace, depth conversion library (shared library)
 The "z" library implements the commonly required image processing basics of
 scaling, colorspace conversion, and depth conversion. A simple API enables
 conversion between any supported formats to operate with minimal knowledge
 from the programmer.
 .
 This package constains the shared library.
Homepage: https://github.com/sekrit-twc/zimg

Package: libzip-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 388
Maintainer: Debian Libzip Maintainers <libzip@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libzip
Version: 1.11.3-2
Depends: libzip5 (= 1.11.3-2), zipcmp (= 1.11.3-2), zipmerge (= 1.11.3-2), ziptool (= 1.11.3-2), zlib1g-dev
Description: library for reading, creating, and modifying zip archives (development)
 libzip is a C library for reading, creating, and modifying zip archives. Files
 can be added from data buffers, files, or compressed data copied directly from
 other zip archives. Changes made without closing the archive can be reverted.
 .
 This package contains the static libraries and headers for developing
 applications that use the libzip library API.
Homepage: https://libzip.org

Package: libzip4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 146
Maintainer: Stefan Schörghofer <amd1212@4md.gr>
Architecture: amd64
Multi-Arch: same
Source: libzip (1.7.3-1)
Version: 1.7.3-1+b1
Depends: libbz2-1.0, libc6 (>= 2.33), libssl3 (>= 3.0.0), zlib1g (>= 1:1.1.4)
Description: library for reading, creating, and modifying zip archives (runtime)
 libzip is a C library for reading, creating, and modifying zip archives. Files
 can be added from data buffers, files, or compressed data copied directly from
 other zip archives. Changes made without closing the archive can be reverted.
 .
 This package contains the files necessary for running applications that
 use the libzip library.
Homepage: https://libzip.org

Package: libzip5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 160
Maintainer: Debian Libzip Maintainers <libzip@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libzip
Version: 1.11.3-2
Depends: libbz2-1.0, libc6 (>= 2.36), liblzma5 (>= 5.1.1alpha+20120614), libssl3t64 (>= 3.0.0), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4)
Description: library for reading, creating, and modifying zip archives (runtime)
 libzip is a C library for reading, creating, and modifying zip archives. Files
 can be added from data buffers, files, or compressed data copied directly from
 other zip archives. Changes made without closing the archive can be reverted.
 .
 This package contains the files necessary for running applications that
 use the libzip library.
Homepage: https://libzip.org

Package: libzix-0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 75
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: zix
Version: 0.6.2-1
Depends: libc6 (>= 2.34)
Description: library of portability wrappers and data structures (shared library)
 Zix provides a lightweight library of portability wrappers and data
 structures. Components of Zix include bump allocator, B-tree, hash table, and
 binary tree implementations. The wrappers include filesystem and threading
 abstractions.
 .
 This package provides the shared library.
Homepage: https://gitlab.com/drobilla/zix

Package: libzmq5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 843
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: zeromq3 (4.3.5-1)
Version: 4.3.5-1+b3
Depends: libbsd0 (>= 0.0), libc6 (>= 2.38), libgcc-s1 (>= 3.0), libgssapi-krb5-2 (>= 1.17), libnorm1t64 (>= 1.5r6), libpgm-5.3-0t64 (>= 5.1.116~dfsg), libsodium23 (>= 1.0.3), libstdc++6 (>= 12)
Description: lightweight messaging kernel (shared library)
 ØMQ is a library which extends the standard socket interfaces with features
 traditionally provided by specialised messaging middleware products.
 .
 ØMQ sockets provide an abstraction of asynchronous message queues, multiple
 messaging patterns, message filtering (subscriptions), seamless access to
 multiple transport protocols and more.
 .
 This package contains the libzmq shared library.
Homepage: https://www.zeromq.org/

Package: libzpool6linux
Status: install ok installed
Priority: optional
Section: contrib/libs
Installed-Size: 4502
Maintainer: Debian ZFS on Linux maintainers <pkg-zfsonlinux-devel@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: same
Source: zfs-linux
Version: 2.3.9-0+deb13u1
Replaces: libzpool2, libzpool5, libzpool5linux
Depends: libblkid1 (>= 2.16), libc6 (>= 2.38), libnvpair3linux (>= 0.8.2), libudev1 (>= 183), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Breaks: libzpool2, libzpool5, libzpool5linux
Description: OpenZFS pool library for Linux
 OpenZFS is a storage platform that encompasses the functionality of
 traditional filesystems and volume managers. It supports data checksums,
 compression, encryption, snapshots, and more.
 .
 This zpool library provides support for managing zpools.
Homepage: https://zfsonlinux.org/

Package: libzstd-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1309
Maintainer: RPM packaging team <team+pkg-rpm@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libzstd
Version: 1.5.7+dfsg-1
Depends: libzstd1 (= 1.5.7+dfsg-1)
Description: fast lossless compression algorithm -- development files
 Zstd, short for Zstandard, is a fast lossless compression algorithm, targeting
 real-time compression scenarios at zlib-level compression ratio.
 .
 This package contains the headers and static library.
Homepage: https://github.com/facebook/zstd

Package: libzstd1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 847
Maintainer: RPM packaging team <team+pkg-rpm@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libzstd
Version: 1.5.7+dfsg-1
Depends: libc6 (>= 2.34)
Description: fast lossless compression algorithm
 Zstd, short for Zstandard, is a fast lossless compression algorithm, targeting
 real-time compression scenarios at zlib-level compression ratio.
 .
 This package contains the shared library.
Homepage: https://github.com/facebook/zstd

Package: libzvbi-common
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 192
Maintainer: Ileana Dumitrescu <ileanadumitrescu95@gmail.com>
Architecture: all
Multi-Arch: foreign
Source: zvbi
Version: 0.2.44-1
Replaces: libzvbi-0.1 (<= 0.2.1-3)
Description: Vertical Blanking Interval decoder (VBI) - common files
 The vertical blanking interval (VBI) is an interval in a television signal
 that temporarily suspends transmission of the signal for the electron gun
 to move back up to the first line of the television screen to trace the
 next screen field.
 .
 The vertical blanking interval can be used to carry data, since anything
 sent during the VBI would naturally not be displayed; various test signals,
 closed captioning, and other digital data can be sent during this time
 period. These include information like closed-caption data, Teletext
 (primarily in Europe), and now Intercast and the ATVEC Internet television
 encodings.
 .
 The Zapping VBI library, in short ZVBI, provides functions to capture and
 decode VBI data. It is written in plain ANSI C with few dependencies on
 other tools and libraries, licensed under GPL. Some features:
   * Captures raw VBI samples from V4L, V4L2 and FreeBSD BKTR devices, sliced
     VBI data from Linux DVB devices;
   * Implements a VBI Proxy to share one VBI device between multiple
     applications;
   * Has a robust and versatile bit slicer which handles a wide range of data
     services;
   * Functions to capture multiple data services at once, such as Closed
     Caption (both NTSC and PAL), Teletext, VPS, WSS, XDS;
   * Level 3.5 Teletext decoder with support for all Teletext character sets,
     graphics, 4096 colors, with built-in page cache including search
     functions;
   * Closed Caption decoder which supports roll-up, pop-up and paint-on style
     caption, color, expanded character set, text attributes and free text
     placement;
   * Renders Teletext and Caption pages, can export to HTML, PNG and other
     formats.
   * Can determine network names;
   * Can find Teletext subtitle and program pages;
   * Functions to extract data transmissions in Teletext streams (currently
     Page Format Clear and Independent Data Line Format A);
   * Can multiplex and demultiplex DVB VBI PES and TS streams.
 .
 This package contains internationalization files.
Homepage: https://github.com/zapping-vbi/zvbi

Package: libzvbi0t64
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 744
Maintainer: Ileana Dumitrescu <ileanadumitrescu95@gmail.com>
Architecture: amd64
Multi-Arch: same
Source: zvbi
Version: 0.2.44-1
Replaces: libzvbi-0.1 (<= 0.2.1-3), libzvbi0
Provides: libzvbi0 (= 0.2.44-1)
Depends: libc6 (>= 2.38), libpng16-16t64 (>= 1.6.46), libzvbi-common (= 0.2.44-1)
Breaks: libzvbi0 (<< 0.2.44-1)
Description: Vertical Blanking Interval decoder (VBI) - runtime files
 The vertical blanking interval (VBI) is an interval in a television signal
 that temporarily suspends transmission of the signal for the electron gun
 to move back up to the first line of the television screen to trace the
 next screen field.
 .
 The vertical blanking interval can be used to carry data, since anything
 sent during the VBI would naturally not be displayed; various test signals,
 closed captioning, and other digital data can be sent during this time
 period. These include information like closed-caption data, Teletext
 (primarily in Europe), and now Intercast and the ATVEC Internet television
 encodings.
 .
 The Zapping VBI library, in short ZVBI, provides functions to capture and
 decode VBI data. It is written in plain ANSI C with few dependencies on
 other tools and libraries, licensed under GPL. Some features:
   * Captures raw VBI samples from V4L, V4L2 and FreeBSD BKTR devices, sliced
     VBI data from Linux DVB devices;
   * Implements a VBI Proxy to share one VBI device between multiple
     applications;
   * Has a robust and versatile bit slicer which handles a wide range of data
     services;
   * Functions to capture multiple data services at once, such as Closed
     Caption (both NTSC and PAL), Teletext, VPS, WSS, XDS;
   * Level 3.5 Teletext decoder with support for all Teletext character sets,
     graphics, 4096 colors, with built-in page cache including search
     functions;
   * Closed Caption decoder which supports roll-up, pop-up and paint-on style
     caption, color, expanded character set, text attributes and free text
     placement;
   * Renders Teletext and Caption pages, can export to HTML, PNG and other
     formats.
   * Can determine network names;
   * Can find Teletext subtitle and program pages;
   * Functions to extract data transmissions in Teletext streams (currently
     Page Format Clear and Independent Data Line Format A);
   * Can multiplex and demultiplex DVB VBI PES and TS streams.
Homepage: https://github.com/zapping-vbi/zvbi

Package: linux-base
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 76
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 4.12.1
Replaces: kernel-common (<= 13.018+nmu1)
Depends: debconf (>= 0.5) | debconf-2.0
Breaks: kernel-common (<= 13.018+nmu1), linux-perf (<< 5.16.2-1~exp1)
Description: Linux image base package
 This package contains files and support scripts for all Linux
 images.

Package: linux-compiler-gcc-12-x86
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 1246
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: linux
Version: 6.1.190-1
Depends: gcc-12
Description: Compiler for Linux on x86 (meta-package)
 This package depends on GCC of the appropriate version and architecture
 for Linux on amd64, i386 and x32.
Homepage: https://www.kernel.org/

Package: linux-headers-6.1.0-51-cloud-amd64
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 2642
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux
Version: 6.1.177-1
Depends: linux-headers-6.1.0-51-common (= 6.1.177-1), linux-kbuild-6.1 (>= 6.1.177-1), linux-compiler-gcc-12-x86
Description: Header files for Linux 6.1.0-51-cloud-amd64
 This package provides the architecture-specific kernel header files for
 Linux kernel 6.1.0-51-cloud-amd64, generally used for building out-of-tree
 kernel modules.  These files are going to be installed into
 /usr/src/linux-headers-6.1.0-51-cloud-amd64, and can be used for building
 modules that load into the kernel provided by the
 linux-image-6.1.0-51-cloud-amd64 package.
Homepage: https://www.kernel.org/

Package: linux-headers-6.1.0-51-common
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 56968
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: linux
Version: 6.1.177-1
Description: Common header files for Linux 6.1.0-51
 This package provides the common kernel header files for Linux kernel
 version 6.1.0-51, generally used for building out-of-tree kernel modules.
 To obtain a complete set of headers you also need to install the
 linux-headers-6.1.0-51-(flavour) package, matching the flavour of the
 kernel you intend the build for.
Homepage: https://www.kernel.org/

Package: linux-headers-6.1.0-52-cloud-amd64
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 2667
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux
Version: 6.1.180-1
Depends: linux-headers-6.1.0-52-common (= 6.1.180-1), linux-kbuild-6.1 (>= 6.1.180-1), linux-compiler-gcc-12-x86
Description: Header files for Linux 6.1.0-52-cloud-amd64
 This package provides the architecture-specific kernel header files for
 Linux kernel 6.1.0-52-cloud-amd64, generally used for building out-of-tree
 kernel modules.  These files are going to be installed into
 /usr/src/linux-headers-6.1.0-52-cloud-amd64, and can be used for building
 modules that load into the kernel provided by the
 linux-image-6.1.0-52-cloud-amd64 package.
Homepage: https://www.kernel.org/

Package: linux-headers-6.1.0-52-common
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 57004
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: linux
Version: 6.1.180-1
Description: Common header files for Linux 6.1.0-52
 This package provides the common kernel header files for Linux kernel
 version 6.1.0-52, generally used for building out-of-tree kernel modules.
 To obtain a complete set of headers you also need to install the
 linux-headers-6.1.0-52-(flavour) package, matching the flavour of the
 kernel you intend the build for.
Homepage: https://www.kernel.org/

Package: linux-headers-6.1.0-54-amd64
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 4101
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux
Version: 6.1.190-1
Depends: linux-headers-6.1.0-54-common (= 6.1.190-1), linux-kbuild-6.1 (>= 6.1.190-1), linux-compiler-gcc-12-x86
Description: Header files for Linux 6.1.0-54-amd64
 This package provides the architecture-specific kernel header files for
 Linux kernel 6.1.0-54-amd64, generally used for building out-of-tree
 kernel modules.  These files are going to be installed into
 /usr/src/linux-headers-6.1.0-54-amd64, and can be used for building
 modules that load into the kernel provided by the
 linux-image-6.1.0-54-amd64 package.
Homepage: https://www.kernel.org/

Package: linux-headers-6.1.0-54-cloud-amd64
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 2742
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux
Version: 6.1.190-1
Depends: linux-headers-6.1.0-54-common (= 6.1.190-1), linux-kbuild-6.1 (>= 6.1.190-1), linux-compiler-gcc-12-x86
Description: Header files for Linux 6.1.0-54-cloud-amd64
 This package provides the architecture-specific kernel header files for
 Linux kernel 6.1.0-54-cloud-amd64, generally used for building out-of-tree
 kernel modules.  These files are going to be installed into
 /usr/src/linux-headers-6.1.0-54-cloud-amd64, and can be used for building
 modules that load into the kernel provided by the
 linux-image-6.1.0-54-cloud-amd64 package.
Homepage: https://www.kernel.org/

Package: linux-headers-6.1.0-54-common
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 57114
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: linux
Version: 6.1.190-1
Description: Common header files for Linux 6.1.0-54
 This package provides the common kernel header files for Linux kernel
 version 6.1.0-54, generally used for building out-of-tree kernel modules.
 To obtain a complete set of headers you also need to install the
 linux-headers-6.1.0-54-(flavour) package, matching the flavour of the
 kernel you intend the build for.
Homepage: https://www.kernel.org/

Package: linux-headers-6.12.113+deb13-amd64
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 10296
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux
Version: 6.12.113-1
Depends: linux-base (>= 4.12~), linux-headers-6.12.113+deb13-common (= 6.12.113-1), linux-image-6.12.113+deb13-amd64 (= 6.12.113-1) | linux-image-6.12.113+deb13-amd64-unsigned (= 6.12.113-1), linux-kbuild-6.12.113+deb13, gcc-14
Description: Header files for Linux 6.12.113+deb13-amd64
 This package provides the architecture-specific kernel header files for
 Linux kernel 6.12.113+deb13-amd64, generally used for building out-of-tree
 kernel modules.  These files are going to be installed into
 /usr/src/linux-headers-6.12.113+deb13-amd64, and can be used for building
 modules that load into the kernel provided by the
 linux-image-6.12.113+deb13-amd64 package.
Homepage: https://www.kernel.org/

Package: linux-headers-6.12.113+deb13-common
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 61466
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: linux
Version: 6.12.113-1
Description: Common header files for Linux 6.12.113+deb13
 This package provides the common kernel header files for Linux kernel
 version 6.12.113+deb13, generally used for building out-of-tree kernel
 modules.  These files are going to be installed into
 /usr/src/linux-headers-6.12.113+deb13-common.
 .
 To obtain a complete set of headers you also need to install the
 linux-headers-6.12.113+deb13-(flavour) package, matching the flavour of
 the kernel you intend the build for.
Homepage: https://www.kernel.org/

Package: linux-headers-amd64
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 13
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux-signed-amd64 (6.12.113+1)
Version: 6.12.113-1
Provides: linux-headers-generic
Depends: linux-headers-6.12.113+deb13-amd64 (= 6.12.113-1)
Description: Header files for Linux amd64 configuration (meta-package)
 This package depends on the architecture-specific header files for the
 latest Linux kernel amd64 configuration.
Homepage: https://www.kernel.org/

Package: linux-image-6.1.0-34-cloud-amd64
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 104546
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux-signed-amd64 (6.1.135+1)
Version: 6.1.135-1
Config-Version: 6.1.135-1
Replaces: linux-image-6.1.0-34-cloud-amd64-unsigned
Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool
Recommends: firmware-linux-free, apparmor
Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux
Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~)
Conflicts: linux-image-6.1.0-34-cloud-amd64-unsigned
Description: Linux 6.1 for x86-64 cloud (signed)
 The Linux kernel 6.1 and modules for use on cloud platforms including
 Amazon EC2, Microsoft Azure, and Google Compute Engine.
 .
 The kernel image and modules are signed for use with Secure Boot.
Built-Using: linux (= 6.1.135-1)
Homepage: https://www.kernel.org/

Package: linux-image-6.1.0-41-cloud-amd64
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 104875
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux-signed-amd64 (6.1.158+1)
Version: 6.1.158-1
Config-Version: 6.1.158-1
Replaces: linux-image-6.1.0-41-cloud-amd64-unsigned
Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool
Recommends: firmware-linux-free, apparmor
Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux
Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~)
Conflicts: linux-image-6.1.0-41-cloud-amd64-unsigned
Description: Linux 6.1 for x86-64 cloud (signed)
 The Linux kernel 6.1 and modules for use on cloud platforms including
 Amazon EC2, Microsoft Azure, and Google Compute Engine.
 .
 The kernel image and modules are signed for use with Secure Boot.
Built-Using: linux (= 6.1.158-1)
Homepage: https://www.kernel.org/

Package: linux-image-6.1.0-42-cloud-amd64
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 104908
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux-signed-amd64 (6.1.159+1)
Version: 6.1.159-1
Config-Version: 6.1.159-1
Replaces: linux-image-6.1.0-42-cloud-amd64-unsigned
Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool
Recommends: firmware-linux-free, apparmor
Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux
Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~)
Conflicts: linux-image-6.1.0-42-cloud-amd64-unsigned
Description: Linux 6.1 for x86-64 cloud (signed)
 The Linux kernel 6.1 and modules for use on cloud platforms including
 Amazon EC2, Microsoft Azure, and Google Compute Engine.
 .
 The kernel image and modules are signed for use with Secure Boot.
Built-Using: linux (= 6.1.159-1)
Homepage: https://www.kernel.org/

Package: linux-image-6.1.0-43-cloud-amd64
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 104948
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux-signed-amd64 (6.1.162+1)
Version: 6.1.162-1
Config-Version: 6.1.162-1
Replaces: linux-image-6.1.0-43-cloud-amd64-unsigned
Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool
Recommends: firmware-linux-free, apparmor
Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux
Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~)
Conflicts: linux-image-6.1.0-43-cloud-amd64-unsigned
Description: Linux 6.1 for x86-64 cloud (signed)
 The Linux kernel 6.1 and modules for use on cloud platforms including
 Amazon EC2, Microsoft Azure, and Google Compute Engine.
 .
 The kernel image and modules are signed for use with Secure Boot.
Built-Using: linux (= 6.1.162-1)
Homepage: https://www.kernel.org/

Package: linux-image-6.1.0-44-cloud-amd64
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 104952
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux-signed-amd64 (6.1.164+1)
Version: 6.1.164-1
Config-Version: 6.1.164-1
Replaces: linux-image-6.1.0-44-cloud-amd64-unsigned
Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool
Recommends: firmware-linux-free, apparmor
Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux
Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~)
Conflicts: linux-image-6.1.0-44-cloud-amd64-unsigned
Description: Linux 6.1 for x86-64 cloud (signed)
 The Linux kernel 6.1 and modules for use on cloud platforms including
 Amazon EC2, Microsoft Azure, and Google Compute Engine.
 .
 The kernel image and modules are signed for use with Secure Boot.
Built-Using: linux (= 6.1.164-1)
Homepage: https://www.kernel.org/

Package: linux-image-6.1.0-45-cloud-amd64
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 105025
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux-signed-amd64 (6.1.170+1)
Version: 6.1.170-1
Config-Version: 6.1.170-1
Replaces: linux-image-6.1.0-45-cloud-amd64-unsigned
Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool
Recommends: firmware-linux-free, apparmor
Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux
Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~)
Conflicts: linux-image-6.1.0-45-cloud-amd64-unsigned
Description: Linux 6.1 for x86-64 cloud (signed)
 The Linux kernel 6.1 and modules for use on cloud platforms including
 Amazon EC2, Microsoft Azure, and Google Compute Engine.
 .
 The kernel image and modules are signed for use with Secure Boot.
Built-Using: linux (= 6.1.170-1)
Homepage: https://www.kernel.org/

Package: linux-image-6.1.0-47-cloud-amd64
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 105026
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux-signed-amd64 (6.1.170+3)
Version: 6.1.170-3
Config-Version: 6.1.170-3
Replaces: linux-image-6.1.0-47-cloud-amd64-unsigned
Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool
Recommends: firmware-linux-free, apparmor
Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux
Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~)
Conflicts: linux-image-6.1.0-47-cloud-amd64-unsigned
Description: Linux 6.1 for x86-64 cloud (signed)
 The Linux kernel 6.1 and modules for use on cloud platforms including
 Amazon EC2, Microsoft Azure, and Google Compute Engine.
 .
 The kernel image and modules are signed for use with Secure Boot.
Built-Using: linux (= 6.1.170-3)
Homepage: https://www.kernel.org/

Package: linux-image-6.1.0-48-cloud-amd64
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 105025
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux-signed-amd64 (6.1.172+1)
Version: 6.1.172-1
Config-Version: 6.1.172-1
Replaces: linux-image-6.1.0-48-cloud-amd64-unsigned
Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool
Recommends: firmware-linux-free, apparmor
Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux
Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~)
Conflicts: linux-image-6.1.0-48-cloud-amd64-unsigned
Description: Linux 6.1 for x86-64 cloud (signed)
 The Linux kernel 6.1 and modules for use on cloud platforms including
 Amazon EC2, Microsoft Azure, and Google Compute Engine.
 .
 The kernel image and modules are signed for use with Secure Boot.
Built-Using: linux (= 6.1.172-1)
Homepage: https://www.kernel.org/

Package: linux-image-6.1.0-49-cloud-amd64
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 105023
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux-signed-amd64 (6.1.174+1)
Version: 6.1.174-1
Config-Version: 6.1.174-1
Replaces: linux-image-6.1.0-49-cloud-amd64-unsigned
Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool
Recommends: firmware-linux-free, apparmor
Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux
Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~)
Conflicts: linux-image-6.1.0-49-cloud-amd64-unsigned
Description: Linux 6.1 for x86-64 cloud (signed)
 The Linux kernel 6.1 and modules for use on cloud platforms including
 Amazon EC2, Microsoft Azure, and Google Compute Engine.
 .
 The kernel image and modules are signed for use with Secure Boot.
Built-Using: linux (= 6.1.174-1)
Homepage: https://www.kernel.org/

Package: linux-image-6.1.0-50-cloud-amd64
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 105110
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux-signed-amd64 (6.1.176+1)
Version: 6.1.176-1
Config-Version: 6.1.176-1
Replaces: linux-image-6.1.0-50-cloud-amd64-unsigned
Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool
Recommends: firmware-linux-free, apparmor
Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux
Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~)
Conflicts: linux-image-6.1.0-50-cloud-amd64-unsigned
Description: Linux 6.1 for x86-64 cloud (signed)
 The Linux kernel 6.1 and modules for use on cloud platforms including
 Amazon EC2, Microsoft Azure, and Google Compute Engine.
 .
 The kernel image and modules are signed for use with Secure Boot.
Built-Using: linux (= 6.1.176-1)
Homepage: https://www.kernel.org/

Package: linux-image-6.1.0-51-cloud-amd64
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 105123
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux-signed-amd64 (6.1.177+1)
Version: 6.1.177-1
Config-Version: 6.1.177-1
Replaces: linux-image-6.1.0-51-cloud-amd64-unsigned
Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool
Recommends: firmware-linux-free, apparmor
Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux
Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~)
Conflicts: linux-image-6.1.0-51-cloud-amd64-unsigned
Description: Linux 6.1 for x86-64 cloud (signed)
 The Linux kernel 6.1 and modules for use on cloud platforms including
 Amazon EC2, Microsoft Azure, and Google Compute Engine.
 .
 The kernel image and modules are signed for use with Secure Boot.
Built-Using: linux (= 6.1.177-1)
Homepage: https://www.kernel.org/

Package: linux-image-6.1.0-52-cloud-amd64
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 105212
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux-signed-amd64 (6.1.180+1)
Version: 6.1.180-1
Replaces: linux-image-6.1.0-52-cloud-amd64-unsigned
Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool
Recommends: firmware-linux-free, apparmor
Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux
Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~)
Conflicts: linux-image-6.1.0-52-cloud-amd64-unsigned
Description: Linux 6.1 for x86-64 cloud (signed)
 The Linux kernel 6.1 and modules for use on cloud platforms including
 Amazon EC2, Microsoft Azure, and Google Compute Engine.
 .
 The kernel image and modules are signed for use with Secure Boot.
Built-Using: linux (= 6.1.180-1)
Homepage: https://www.kernel.org/

Package: linux-image-6.1.0-53-cloud-amd64
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 105252
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux-signed-amd64 (6.1.187+1)
Version: 6.1.187-1
Config-Version: 6.1.187-1
Replaces: linux-image-6.1.0-53-cloud-amd64-unsigned
Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool
Recommends: firmware-linux-free, apparmor
Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux
Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~)
Conflicts: linux-image-6.1.0-53-cloud-amd64-unsigned
Description: Linux 6.1 for x86-64 cloud (signed)
 The Linux kernel 6.1 and modules for use on cloud platforms including
 Amazon EC2, Microsoft Azure, and Google Compute Engine.
 .
 The kernel image and modules are signed for use with Secure Boot.
Built-Using: linux (= 6.1.187-1)
Homepage: https://www.kernel.org/

Package: linux-image-6.1.0-54-cloud-amd64
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 105390
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux-signed-amd64 (6.1.190+1)
Version: 6.1.190-1
Replaces: linux-image-6.1.0-54-cloud-amd64-unsigned
Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool
Recommends: firmware-linux-free, apparmor
Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux
Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~)
Conflicts: linux-image-6.1.0-54-cloud-amd64-unsigned
Description: Linux 6.1 for x86-64 cloud (signed)
 The Linux kernel 6.1 and modules for use on cloud platforms including
 Amazon EC2, Microsoft Azure, and Google Compute Engine.
 .
 The kernel image and modules are signed for use with Secure Boot.
Built-Using: linux (= 6.1.190-1)
Homepage: https://www.kernel.org/

Package: linux-image-6.12.113+deb13-amd64
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 108828
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux-signed-amd64 (6.12.113+1)
Version: 6.12.113-1
Replaces: linux-image-6.12.113+deb13-amd64-unsigned
Depends: kmod, initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool
Pre-Depends: linux-base (>= 4.12~)
Recommends: apparmor
Suggests: firmware-linux-free, linux-doc-6.12, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux
Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~)
Conflicts: linux-image-6.12.113+deb13-amd64-unsigned
Description: Linux 6.12 for 64-bit PCs (signed)
 The Linux kernel 6.12 and modules for use on PCs with AMD64, Intel 64 or
 VIA Nano processors.
 .
 The kernel image is signed for use with Secure Boot.
Built-Using: linux (= 6.12.113-1)
Homepage: https://www.kernel.org/

Package: linux-image-6.12.113+deb13-cloud-amd64
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 34844
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux-signed-amd64 (6.12.113+1)
Version: 6.12.113-1
Replaces: linux-image-6.12.113+deb13-cloud-amd64-unsigned
Depends: kmod, initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool
Pre-Depends: linux-base (>= 4.12~)
Recommends: apparmor
Suggests: firmware-linux-free, linux-doc-6.12, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux
Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~)
Conflicts: linux-image-6.12.113+deb13-cloud-amd64-unsigned
Description: Linux 6.12 for x86-64 cloud (signed)
 The Linux kernel 6.12 and modules for use on cloud platforms including
 Amazon EC2, Microsoft Azure, and Google Compute Engine.
 .
 The kernel image is signed for use with Secure Boot.
Built-Using: linux (= 6.12.113-1)
Homepage: https://www.kernel.org/

Package: linux-image-cloud-amd64
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 13
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux-signed-amd64 (6.12.113+1)
Version: 6.12.113-1
Provides: linux-latest-modules-6.12.113+deb13-cloud-amd64, virtualbox-guest-modules, wireguard-modules (= 1.0.0)
Depends: linux-image-6.12.113+deb13-cloud-amd64 (= 6.12.113-1)
Description: Linux for x86-64 cloud (meta-package)
 This package depends on the latest Linux kernel and modules for use on
 cloud platforms including Amazon EC2, Microsoft Azure, and Google Compute
 Engine.
Homepage: https://www.kernel.org/

Package: linux-kbuild-6.1
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 2350
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: linux
Version: 6.1.190-1
Depends: libc6 (>= 2.34), libelf1 (>= 0.142), libssl3 (>= 3.0.0)
Description: Kbuild infrastructure for Linux 6.1
 This package provides the kbuild infrastructure for the headers packages
 for Linux kernel version 6.1.
Homepage: https://www.kernel.org/

Package: linux-kbuild-6.12.113+deb13
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 3193
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: linux
Version: 6.12.113-1
Depends: libc6 (>= 2.38), libelf1t64 (>= 0.144), libssl3t64 (>= 3.0.0), zlib1g (>= 1:1.2.3.4), pahole
Description: Kbuild infrastructure for Linux 6.12.113+deb13
 This package provides the kbuild infrastructure for the headers packages
 for Linux kernel version 6.12.
Homepage: https://www.kernel.org/

Package: linux-libc-dev
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 11075
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: linux
Version: 6.12.113-1
Description: Linux support headers for userspace development
 This package provides userspaces headers from the Linux kernel.  These
 files are going to be installed into /usr/include, and are used by the
 installed headers for GNU libc and other system libraries.
Homepage: https://www.kernel.org/

Package: linux-sysctl-defaults
Status: install ok installed
Priority: important
Section: kernel
Installed-Size: 19
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: linux-base
Version: 4.12.1
Description: default sysctl configuration for Linux
 This package contains a sysctl configuration file setting some
 sensible defaults for Linux.

Package: locales
Status: install ok installed
Priority: standard
Section: localization
Installed-Size: 15775
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: all
Source: glibc
Version: 2.41-12+deb13u4
Depends: libc-bin (>> 2.41), libc-l10n (>> 2.41), debconf (>= 0.5) | debconf-2.0
Conffiles:
 /etc/locale.alias 171695b82f06f6f00e397da76492556c
Description: GNU C Library: National Language (locale) data [support]
 Machine-readable data files, shared objects and programs used by the
 C library for localization (l10n) and internationalization (i18n) support.
 .
 This package contains tools to generate locale definitions from source
 files (included in this package). It allows you to customize which
 definitions actually get generated. This is a space-saver over how this
 package used to be, with all locales generated by default. This created
 a package that unpacked to an excess of 30 megs.
Homepage: https://www.gnu.org/software/libc/libc.html

Package: login
Protected: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 287
Maintainer: Chris Hofstaedtler <zeha@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux (2.41.5-0+deb13u1)
Version: 1:4.16.0-2+really2.41.5-0+deb13u1
Depends: libpam-modules, libpam-runtime, libaudit1 (>= 1:2.2.1), libc6 (>= 2.38), libcrypt1 (>= 1:4.1.0), libpam0g (>= 0.99.7.1)
Pre-Depends: login.defs (>= 1:4.16.0-1~)
Conffiles:
 /etc/pam.d/login b6129a3c1af42a9977b29f490ecd057e
Description: system login tools
 This package provides support for console-based logins and for
 changing effective user or group IDs, including:
  * login, the program that invokes a user shell on a virtual terminal,
  * nologin, a dummy shell for disabled user accounts,
  * newgrp, a program to change the effective group IDs.
Homepage: https://github.com/util-linux/util-linux

Package: login.defs
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 214
Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: shadow
Version: 1:4.17.4-2
Replaces: login (<< 1:4.16.0-2~)
Conffiles:
 /etc/login.defs f4e7091da823fd58589e991a2f9c2d96
Description: system user management configuration
 This package provides the login.defs configuration file,
 used by otherwise unrelated tools managing system users.
Homepage: https://github.com/shadow-maint/shadow

Package: logsave
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 59
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: foreign
Source: e2fsprogs (1.47.2-3)
Version: 1.47.2-3+b12
Replaces: e2fsprogs (<< 1.45.3-1)
Depends: libc6 (>= 2.34)
Breaks: e2fsprogs (<< 1.45.3-1)
Description: save the output of a command in a log file
 The logsave program will execute cmd_prog with the specified
 argument(s), and save a copy of its output to logfile.  If the
 containing directory for logfile does not exist, logsave will
 accumulate the output in memory until it can be written out.  A copy
 of the output will also be written to standard output.
Homepage: http://e2fsprogs.sourceforge.net

Package: lsb-release
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 17
Maintainer: Gioele Barabucci <gioele@svario.it>
Architecture: all
Multi-Arch: foreign
Source: lsb-release-minimal
Version: 12.1-1
Description: Linux Standard Base version reporting utility (minimal implementation)
 The Linux Standard Base (http://www.linuxbase.org/) is a standard
 core system that third-party applications written for Linux can
 depend upon.
 .
 The lsb_release command is a simple tool to help identify the Linux
 distribution being used and its compliance with the Linux Standard Base.
 .
 This package contains a bare-bones implementation that uses the
 information in /etc/os-release instead of relying on LSB packages.
Homepage: https://gioele.io/lsb-release-minimal

Package: lsof
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 492
Maintainer: Andres Salomon <dilinger@debian.org>
Architecture: amd64
Version: 4.99.4+dfsg-2
Depends: liblsof0 (= 4.99.4+dfsg-2), libc6 (>= 2.34), libselinux1 (>= 3.1~), libtirpc3t64 (>= 1.0.2)
Description: utility to list open files
 Lsof is a Unix-specific diagnostic tool.  Its name stands
 for LiSt Open Files, and it does just that.  It lists
 information about any files that are open, by processes
 currently running on the system.
 .
 This package contains the classic lsof command line tool.
Homepage: https://github.com/lsof-org/lsof

Package: lua-lpeg
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 279
Maintainer: Debian Lua Team <pkg-lua-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Version: 1.1.0-2
Provides: lua5.1-lpeg, lua5.2-lpeg, lua5.3-lpeg, lua5.4-lpeg
Depends: libc6 (>= 2.14)
Breaks: lua-json (<< 1.3.4-3~)
Description: LPeg library for the Lua language
 LPeg is a new pattern-matching library for Lua, based on Parsing Expression
 Grammars (PEGs). PEGs look similar to regular expressions or context-free
 grammars in Backus-Naur form (BNF) notation. PEGs make a good replacement for
 regular expressions, because they are strictly more powerful. For example, a
 regular expression inherently cannot find matched pairs of parentheses, because
 it is not recursive, but a PEG can.
Homepage: https://www.inf.puc-rio.br/~roberto/lpeg/
Lua-Versions: 5.1 5.2 5.3 5.4

Package: luit
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 135
Maintainer: Thomas E. Dickey <dickey@invisible-island.net>
Architecture: amd64
Multi-Arch: foreign
Version: 2.0.20240910-1
Replaces: x11-utils (<< 7.7+6)
Provides: luit
Depends: libc6 (>= 2.34)
Breaks: x11-utils (<< 7.7+6)
Description: locale and ISO 2022 support for Unicode terminals
 Luit is a filter that can be run between an arbitrary application and a
 UTF-8 terminal emulator.  It will convert application output  from  the
 locale's  encoding  into  UTF-8,  and convert terminal input from UTF-8
 into the locale's encoding.
 .
 This is version 2.0 of luit, which can use encoding information from
 either the font-encoding data-files in the "xfonts-encodings" package,
 or the standard locale support in the C runtime library.
Homepage: https://invisible-island.net/luit/

Package: m4
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 683
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.4.19-8
Depends: libc6 (>= 2.38)
Suggests: m4-doc
Description: macro processing language
 GNU `m4' is an implementation of the traditional UNIX macro
 processor.  It is mostly SVR4 compatible, although it has some
 extensions (for example, handling more than 9 positional parameters to
 macros).  `m4' also has builtin functions for including files, running
 shell commands, doing arithmetic, etc.  Autoconf needs GNU `m4' for
 generating `configure' scripts, but not for running them.
Homepage: https://www.gnu.org/software/m4/

Package: mailcap
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 87
Maintainer: Mime-Support Packagers <team+debian-mimesupport-packagers@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 3.74
Replaces: mime-support (<< 3.65)
Provides: run-mailcap
Depends: perl, media-types
Recommends: bzip2, file, xz-utils
Breaks: mime-support (<< 3.65)
Conffiles:
 /etc/mailcap.order ba07e08a7fe3741d0b8339127963190e
Description: Debian's mailcap system, and support programs
 The mailcap system associates media types with programs that can handle them,
 using system and user configuration files.  A file's media type is determined
 by its extension or by running the "file" command if available.
 .
 Other packages register their programs as viewers/editors/composers/etc by
 placing mailcap entry files or FreeDesktop menu entries in predetermined
 directories monitored by this package's dpkg triggers.
 .
 This package provides a "run-mailcap" program to open arbitrary files, and in
 addition the "see", "edit", "compose", and "print" aliases to display, alter,
 create, and print (respectively).
 .
 This package also provides the "debian-view" utility to handle Debian packages
 interactively.

Package: make
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 1766
Maintainer: Stephen Kitt <skitt@debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: make-dfsg
Version: 4.4.1-2
Replaces: make-guile
Depends: libc6 (>= 2.38)
Suggests: make-doc
Conflicts: make-guile
Description: utility for directing compilation
 GNU Make is a utility which controls the generation of executables
 and other target files of a program from the program's source
 files. It determines automatically which pieces of a large program
 need to be (re)created, and issues the commands to (re)create
 them. Make can be used to organize any task in which targets (files)
 are to be automatically updated based on input files whenever the
 corresponding input is newer --- it is not limited to building
 computer programs. Indeed, Make is a general purpose dependency
 solver.
Homepage: https://www.gnu.org/software/make/

Package: man-db
Status: install ok installed
Priority: important
Section: doc
Installed-Size: 3153
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.13.1-1
Replaces: man
Provides: man, man-browser
Depends: bsdextrautils | bsdmainutils (<< 12.1.1~), groff-base, debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.38), libgdbm6t64 (>= 1.16), libpipeline1 (>= 1.5.0), libseccomp2 (>= 2.1.0), zlib1g (>= 1:1.1.4)
Suggests: apparmor, groff, less, www-browser
Conflicts: man
Conffiles:
 /etc/apparmor.d/usr.bin.man 4f614d75041882370498f7fe2d43a44b
 /etc/cron.daily/man-db 62423d7fa68568c9c0aefceac182d9ea
 /etc/cron.weekly/man-db eebc5bb3e1dac973301570da3f453334
 /etc/manpath.config 6d70333de0a08c7a71018da458201eb6
Description: tools for reading manual pages
 This package provides the man command, the primary way of examining the
 system help files (manual pages). Other utilities provided include the
 whatis and apropos commands for searching the manual page database, the
 manpath utility for determining the manual page search path, and the
 maintenance utilities mandb, catman and zsoelim. man-db uses the groff
 suite of programs to format and display the manual pages.
Homepage: https://man-db.gitlab.io/man-db/

Package: manpages
Status: install ok installed
Priority: standard
Section: doc
Installed-Size: 1668
Maintainer: Dr. Tobias Quathamer <toddy@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 6.9.1-1
Replaces: initscripts (<< 3.0.0-1), inn2-dev (<< 2.6.5-1), manpages-dev (<< 5.09-2)
Suggests: man-browser
Breaks: initscripts (<< 3.0.0-1), inn2-dev (<< 2.6.5-1), manpages-dev (<< 5.09-2)
Description: Manual pages about using a GNU/Linux system
 This package contains GNU/Linux manual pages for these sections:
  4 = Devices (e.g. hd, sd).
  5 = File formats and protocols, syntaxes of several system
      files (e.g. wtmp, /etc/passwd, nfs).
  7 = Conventions and standards, macro packages, etc.
      (e.g. nroff, ascii).
 .
 Beside the intro man page describing the section, a few manual
 pages from sections 1,6 and 8 are also provided.
 .
 The man pages describe syntaxes of several system files.
Homepage: https://www.kernel.org/doc/man-pages/

Package: manpages-dev
Status: install ok installed
Priority: optional
Section: doc
Installed-Size: 3978
Maintainer: Dr. Tobias Quathamer <toddy@debian.org>
Architecture: all
Multi-Arch: foreign
Source: manpages
Version: 6.9.1-1
Replaces: glibc-doc (<< 2.37-16), inn2-dev (<< 2.7.0-1), manpages (<< 6.7-1)
Depends: manpages
Suggests: man-browser
Breaks: glibc-doc (<< 2.37-16), inn2-dev (<< 2.7.0-1), manpages (<< 6.7-1)
Description: Manual pages about using GNU/Linux for development
 These man pages describe the Linux programming interface, including
 these two sections:
  2 = Linux system calls.
  3 = Library calls (note that a more comprehensive source of information
      may be found in the glibc-doc and glibc-doc-reference packages).
Homepage: https://www.kernel.org/doc/man-pages/

Package: mariadb-client
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 64750
Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Architecture: amd64
Source: mariadb
Version: 1:11.8.6-0+deb13u1
Replaces: mariadb-client-10.0, mariadb-client-10.1, mariadb-client-10.2, mariadb-client-10.3, mariadb-client-10.4, mariadb-client-10.5, mariadb-client-10.6, mariadb-client-5.5, mariadb-client-compat (<< 1:11.8.6-0+deb13u1), mariadb-client-core (<< 1:11.8.6-0+deb13u1), mariadb-client-core-10.0, mariadb-client-core-10.1, mariadb-client-core-10.2, mariadb-client-core-10.3, mariadb-client-core-10.4, mariadb-client-core-10.5, mariadb-client-core-10.6, mariadb-server (<< 1:11.8.6-0+deb13u1), mariadb-server-10.0, mariadb-server-10.1, mariadb-server-10.2, mariadb-server-10.3, mariadb-server-10.4, mariadb-server-10.5 (<< 1:10.11), mariadb-server-10.6, mysql-client-5.5, mysql-client-5.6, mysql-client-5.7, mysql-client-8.0, mysql-client-core (<< 9.9~), mysql-server-5.5, mysql-server-5.7, mysql-server-core (<< 9.9~), mysql-server-core-8.0, mytop, percona-server-server-5.6, percona-xtradb-cluster-server-5.6, percona-xtradb-cluster-server-5.7, virtual-mysql-client
Provides: virtual-mysql-client
Depends: debianutils (>= 1.6), libconfig-inifiles-perl, mariadb-client-core (>= 1:11.8.6-0+deb13u1), perl:any, libc6 (>= 2.38), libgcc-s1 (>= 3.0), libpcre2-posix3 (>= 10.34), libssl3t64 (>= 3.0.0), libstdc++6 (>= 14), zlib1g (>= 1:1.2.0)
Recommends: libdbd-mariadb-perl | libdbd-mysql-perl, libdbi-perl, libterm-readkey-perl
Breaks: mariadb-client-10.0, mariadb-client-10.1, mariadb-client-10.2, mariadb-client-10.3, mariadb-client-10.4, mariadb-client-10.5, mariadb-client-10.6, mariadb-client-5.5, mariadb-client-compat (<< 1:11.8.6-0+deb13u1), mariadb-client-core (<< 1:11.8.6-0+deb13u1), mariadb-client-core-10.0, mariadb-client-core-10.1, mariadb-client-core-10.2, mariadb-client-core-10.3, mariadb-client-core-10.4, mariadb-client-core-10.5, mariadb-client-core-10.6, mariadb-server (<< 1:11.8.6-0+deb13u1), mariadb-server-10.0, mariadb-server-10.1, mariadb-server-10.2, mariadb-server-10.3, mariadb-server-10.4, mariadb-server-10.5 (<< 1:10.11), mariadb-server-10.6, mysql-client-5.5, mysql-client-5.6, mysql-client-5.7, mysql-client-8.0, mysql-client-core (<< 9.9~), mysql-server-5.5, mysql-server-5.7, mysql-server-core (<< 9.9~), mysql-server-core-8.0, percona-server-server-5.6, percona-xtradb-cluster-server-5.6, percona-xtradb-cluster-server-5.7
Conflicts: mysql-client-core-5.5, mysql-client-core-5.6, mysql-client-core-5.7, mysql-client-core-8.0, mytop, virtual-mysql-client
Conffiles:
 /etc/mysql/mariadb.conf.d/50-client.cnf a8028d231dad4d2658bfd8b0db11f85e
 /etc/mysql/mariadb.conf.d/50-mariadb-clients.cnf 4053917ba6f381811d49188c5803bcdf
 /etc/mysql/mariadb.conf.d/60-galera.cnf 655c85e18aeac0f013c8a87c6d182180
 /etc/mysql/mariadb.conf.d/50-mysql-clients.cnf 2e0e48974b270cb20c2b66aa71f6cd92 obsolete
Description: MariaDB database client binaries
 MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MariaDB are speed, robustness and
 ease of use.
 .
 This package includes the client binaries and the additional tools
 innotop and mariadb-report (mysqlreport).
Homepage: https://mariadb.org/

Package: mariadb-client-core
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 15066
Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Architecture: amd64
Source: mariadb
Version: 1:11.8.6-0+deb13u1
Replaces: mariadb-client-10.0, mariadb-client-core-10.0, mariadb-client-core-10.1, mariadb-client-core-10.2, mariadb-client-core-10.3, mariadb-client-core-10.4, mariadb-client-core-10.5, mariadb-client-core-10.6, mariadb-client-core-5.5, mariadb-server-10.0, mariadb-server-10.1, mariadb-server-core (<< 1:11.8.6-0+deb13u1), mariadb-server-core-10.3, mariadb-server-core-10.4, mariadb-server-core-10.5, mariadb-server-core-10.6, mysql-client-core (<< 9.9~), mysql-client-core-5.5, mysql-client-core-5.6, mysql-client-core-5.7, mysql-client-core-8.0, mysql-cluster-community-client-plugins, mysql-server-core (<< 9.9~), mysql-server-core-5.5, mysql-server-core-5.6, mysql-server-core-5.7, mysql-server-core-8.0, percona-server-server-5.6, percona-server-server-5.7, percona-server-server-8.0, percona-xtradb-cluster-server-5.6, percona-xtradb-cluster-server-5.7, percona-xtradb-cluster-server-8.0, virtual-mysql-client-core
Provides: virtual-mysql-client-core
Depends: libmariadb3 (>= 10.5.4), mariadb-common (>= 1:11.8.6-0+deb13u1), libc6 (>= 2.38), libedit2 (>= 2.11-20080614-0), libgcc-s1 (>= 3.0), libncurses6 (>= 6), libssl3t64 (>= 3.0.0), libstdc++6 (>= 4.1.1), libtinfo6 (>= 6), zlib1g (>= 1:1.1.4)
Breaks: mariadb-client-10.0, mariadb-client-core-10.0, mariadb-client-core-10.1, mariadb-client-core-10.2, mariadb-client-core-10.3, mariadb-client-core-10.4, mariadb-client-core-10.5, mariadb-client-core-10.6, mariadb-client-core-5.5, mariadb-server-10.0, mariadb-server-10.1, mariadb-server-core (<< 1:11.8.6-0+deb13u1), mariadb-server-core-10.3, mariadb-server-core-10.4, mariadb-server-core-10.5, mariadb-server-core-10.6, mysql-client-core (<< 9.9~), mysql-client-core-5.5, mysql-client-core-5.6, mysql-client-core-5.7, mysql-client-core-8.0, mysql-cluster-community-client-plugins, mysql-server-core (<< 9.9~), mysql-server-core-5.5, mysql-server-core-5.6, mysql-server-core-5.7, mysql-server-core-8.0, percona-server-server-5.6, percona-server-server-5.7, percona-server-server-8.0, percona-xtradb-cluster-server-5.6, percona-xtradb-cluster-server-5.7, percona-xtradb-cluster-server-8.0
Conflicts: mysql-client-5.5, mysql-client-5.6, mysql-client-5.7, mysql-client-8.0, virtual-mysql-client-core
Description: MariaDB database core client binaries
 MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MariaDB are speed, robustness and
 ease of use.
 .
 This package includes the core client files, as used by Akonadi.
Homepage: https://mariadb.org/

Package: mariadb-common
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 70
Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: mariadb
Version: 1:11.8.6-0+deb13u1
Depends: mysql-common (>= 5.6.25)
Conffiles:
 /etc/mysql/mariadb.cnf f78499dd07dccc3238cc15dd937b87bb
Description: MariaDB database common config files (/etc/mysql/mariadb.conf.d/)
 MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MariaDB are speed, robustness and
 ease of use.
 .
 This package includes configuration files common to all MariaDB programs.
Homepage: https://mariadb.org/

Package: mariadb-plugin-provider-bzip2
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 85
Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Architecture: amd64
Source: mariadb
Version: 1:11.8.6-0+deb13u1
Depends: mariadb-server-core (= 1:11.8.6-0+deb13u1), libbz2-1.0
Conffiles:
 /etc/mysql/mariadb.conf.d/provider_bzip2.cnf 6c0ab650087968bec0b0070644a32750
Description: BZip2 compression support in the server and storage engines
 The various MariaDB storage engines, such as InnoDB, RocksDB, Mroonga,
 can use different compression libraries.
 .
 Plugin provides BZip2 (https://sourceware.org/bzip2/) compression
 .
 Note that these affect InnoDB and Mroonga only;
 RocksDB still uses the compression algorithms from its own library
Homepage: https://mariadb.org/

Package: mariadb-plugin-provider-lz4
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 85
Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Architecture: amd64
Source: mariadb
Version: 1:11.8.6-0+deb13u1
Depends: mariadb-server-core (= 1:11.8.6-0+deb13u1), liblz4-1 (>= 0.0~r130)
Conffiles:
 /etc/mysql/mariadb.conf.d/provider_lz4.cnf 5dc12c9891064bc1e8a2667e1f13507f
Description: LZ4 compression support in the server and storage engines
 The various MariaDB storage engines, such as InnoDB, RocksDB, Mroonga,
 can use different compression libraries.
 .
 Plugin provides LZ4 (http://lz4.github.io/lz4/) compression
 .
 Note that these affect InnoDB and Mroonga only;
 RocksDB still uses the compression algorithms from its own library
Homepage: https://mariadb.org/

Package: mariadb-plugin-provider-lzma
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 86
Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Architecture: amd64
Source: mariadb
Version: 1:11.8.6-0+deb13u1
Depends: mariadb-server-core (= 1:11.8.6-0+deb13u1), liblzma5 (>= 5.1.1alpha+20110809)
Conffiles:
 /etc/mysql/mariadb.conf.d/provider_lzma.cnf 69ea1a502df249cf2257fa231827ab0a
Description: LZMA compression support in the server and storage engines
 The various MariaDB storage engines, such as InnoDB, RocksDB, Mroonga,
 can use different compression libraries.
 .
 Plugin provides LZMA (https://tukaani.org/lzma/) compression
 .
 Note that these affect InnoDB and Mroonga only;
 RocksDB still uses the compression algorithms from its own library
Homepage: https://mariadb.org/

Package: mariadb-plugin-provider-lzo
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 85
Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Architecture: amd64
Source: mariadb
Version: 1:11.8.6-0+deb13u1
Depends: mariadb-server-core (= 1:11.8.6-0+deb13u1), liblzo2-2 (>= 2.02)
Conffiles:
 /etc/mysql/mariadb.conf.d/provider_lzo.cnf 4753866a6c3ac054a75c87782b450b5b
Description: LZO compression support in the server and storage engines
 The various MariaDB storage engines, such as InnoDB, RocksDB, Mroonga,
 can use different compression libraries.
 .
 Plugin provides LZO (http://www.oberhumer.com/opensource/lzo/) compression
 .
 Note that these affect InnoDB and Mroonga only;
 RocksDB still uses the compression algorithms from its own library
Homepage: https://mariadb.org/

Package: mariadb-plugin-provider-snappy
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 85
Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Architecture: amd64
Source: mariadb
Version: 1:11.8.6-0+deb13u1
Depends: mariadb-server-core (= 1:11.8.6-0+deb13u1), libsnappy1v5 (>= 1.2.2)
Conffiles:
 /etc/mysql/mariadb.conf.d/provider_snappy.cnf 97735326f1364fa9e7bd76893334fce0
Description: Snappy compression support in the server and storage engines
 The various MariaDB storage engines, such as InnoDB, RocksDB, Mroonga,
 can use different compression libraries.
 .
 Plugin provides Snappy (https://github.com/google/snappy) compression
 .
 Note that these affect InnoDB and Mroonga only;
 RocksDB still uses the compression algorithms from its own library
Homepage: https://mariadb.org/

Package: mariadb-server
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 55145
Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Architecture: amd64
Source: mariadb
Version: 1:11.8.6-0+deb13u1
Replaces: handlersocket-mysql-5.5, mariadb-galera-server, mariadb-galera-server-10.0, mariadb-galera-server-5.5, mariadb-server-10.0, mariadb-server-10.1, mariadb-server-10.2, mariadb-server-10.3, mariadb-server-10.4, mariadb-server-10.5 (<< 1:10.11), mariadb-server-10.6, mariadb-server-5.5, mariadb-tokudb-engine-10.0, mariadb-tokudb-engine-10.1, mariadb-tokudb-engine-5.5, mysql-client-5.5, mysql-client-5.7, mysql-client-core (<< 9.9~), mysql-client-core-8.0, mysql-server (<< 9.9~), mysql-server-5.5, mysql-server-5.6, mysql-server-5.7, mysql-server-8.0, mysql-server-core (<< 9.9~), percona-server-server-5.6, percona-xtradb-cluster-server-5.6, percona-xtradb-cluster-server-5.7, virtual-mysql-server
Provides: virtual-mysql-server
Depends: galera-4 (>= 26.4), gawk, iproute2, libdbi-perl, lsof, mariadb-client (>= 1:11.8.6-0+deb13u1), mariadb-server-core (>= 1:11.8.6-0+deb13u1), passwd, perl (>= 5.6), psmisc, rsync, socat, debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.38), libgcc-s1 (>= 3.0), libpam0g (>= 0.99.7.1), libssl3t64 (>= 3.0.0), libstdc++6 (>= 14), zlib1g (>= 1:1.1.4)
Pre-Depends: adduser (>= 3.40), debconf, mariadb-common (>= 1:11.8.6-0+deb13u1), procps, init-system-helpers (>= 1.54~)
Recommends: libhtml-template-perl, mariadb-plugin-provider-bzip2, mariadb-plugin-provider-lz4, mariadb-plugin-provider-lzma, mariadb-plugin-provider-lzo, mariadb-plugin-provider-snappy, pv
Suggests: mailx, mariadb-test, netcat-openbsd
Breaks: cqrlog (<< 1.9.0-5~), galera-3 (<< 26.4), handlersocket-mysql-5.5, mariadb-galera-server, mariadb-galera-server-10.0, mariadb-galera-server-5.5, mariadb-server-10.0, mariadb-server-10.1, mariadb-server-10.2, mariadb-server-10.3, mariadb-server-10.4, mariadb-server-10.5 (<< 1:10.11), mariadb-server-10.6, mariadb-server-5.5, mariadb-tokudb-engine-10.0, mariadb-tokudb-engine-10.1, mariadb-tokudb-engine-5.5, mysql-client-5.5, mysql-client-5.7, mysql-client-core (<< 9.9~), mysql-client-core-8.0, mysql-server (<< 9.9~), mysql-server-5.5, mysql-server-5.6, mysql-server-5.7, mysql-server-8.0, mysql-server-core (<< 9.9~)
Conflicts: handlersocket-mysql-5.5, mariadb-tokudb-engine-10.0, mariadb-tokudb-engine-10.1, mariadb-tokudb-engine-5.5, mysql-server-core-5.5, mysql-server-core-5.6, mysql-server-core-5.7, mysql-server-core-8.0, percona-server-server-5.6, percona-xtradb-cluster-server-5.6, percona-xtradb-cluster-server-5.7, virtual-mysql-server
Conffiles:
 /etc/apparmor.d/usr.sbin.mariadbd dacafa122cb26bc12319782acc6aff47
 /etc/init.d/mariadb 630ae8109b947bb8e568f15e61bbee43
 /etc/logcheck/ignore.d.paranoid/mariadb-server e0e3191cc12a25fdd6f57889a204295d
 /etc/logcheck/ignore.d.server/mariadb-server 4f612f8c23f0463cf34ccbd851009388
 /etc/logcheck/ignore.d.workstation/mariadb-server 4f612f8c23f0463cf34ccbd851009388
 /etc/logrotate.d/mariadb 9694f545cc2483ce09930879b2fb9aa6
 /etc/mysql/debian-start bd839b84cc19c7d170338f9ebf6338bc
 /etc/mysql/mariadb.conf.d/50-mysqld_safe.cnf ae130218a23989c3a504c95831610b4b
 /etc/mysql/mariadb.conf.d/50-server.cnf 2802b3fb90ac1fc563b5f98602ca96e4
 /etc/security/user_map.conf 126cbe3b479937c707031f9576702be9
Description: MariaDB database server binaries
 MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MariaDB are speed, robustness and
 ease of use.
 .
 This package includes the server binaries.
Homepage: https://mariadb.org/

Package: mariadb-server-core
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 47699
Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Architecture: amd64
Source: mariadb
Version: 1:11.8.6-0+deb13u1
Replaces: mariadb-client-10.1, mariadb-server (<< 1:11.8.6-0+deb13u1), mariadb-server-10.0, mariadb-server-10.1, mariadb-server-10.2, mariadb-server-10.3, mariadb-server-10.4, mariadb-server-10.5 (<< 1:10.11), mariadb-server-10.6, mariadb-server-compat (<< 1:11.8.6-0+deb13u1), mariadb-server-core-10.0, mariadb-server-core-10.1, mariadb-server-core-10.2, mariadb-server-core-10.3, mariadb-server-core-10.4, mariadb-server-core-10.5, mariadb-server-core-10.6, mariadb-server-core-5.5, mysql-client-5.5, mysql-client-5.6, mysql-client-5.7, mysql-client-8.0, mysql-server-core (<< 9.9~), mysql-server-core-5.5, mysql-server-core-5.6, mysql-server-core-5.7, mysql-server-core-8.0, percona-server-server-5.6, percona-xtradb-cluster-server-5.6, percona-xtradb-cluster-server-5.7, virtual-mysql-server-core
Provides: virtual-mysql-server-core
Depends: mariadb-common (>= 1:11.8.6-0+deb13u1), libaio1t64 (>= 0.3.93), libc6 (>= 2.38), libcrypt1 (>= 1:4.1.0), libgcc-s1 (>= 3.0), libnuma1 (>= 2.0.11), libpcre2-8-0 (>= 10.22), libssl3t64 (>= 3.0.0), libstdc++6 (>= 14), libsystemd0 (>= 227), liburing2 (>= 2.3), zlib1g (>= 1:1.2.0)
Breaks: mariadb-client-10.1, mariadb-server-10.0, mariadb-server-10.1, mariadb-server-10.2, mariadb-server-10.3, mariadb-server-10.4, mariadb-server-10.5 (<< 1:10.11), mariadb-server-compat (<< 1:11.8.6-0+deb13u1), mariadb-server-core-10.0, mariadb-server-core-10.1, mariadb-server-core-10.2, mariadb-server-core-10.3, mariadb-server-core-10.4, mariadb-server-core-10.5, mariadb-server-core-10.6, mariadb-server-core-5.5, mysql-client-5.5, mysql-client-5.6, mysql-server-core (<< 9.9~), mysql-server-core-5.5, mysql-server-core-5.6, mysql-server-core-5.7, mysql-server-core-8.0, percona-server-server-5.6, percona-xtradb-cluster-server-5.6, percona-xtradb-cluster-server-5.7
Conflicts: mariadb-galera-server-5.5, mysql-server-5.5, mysql-server-5.6, mysql-server-5.7, mysql-server-8.0, virtual-mysql-server-core
Description: MariaDB database core server files
 MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MariaDB are speed, robustness and
 ease of use.
 .
 This package includes the core server files, as used by Akonadi.
Homepage: https://mariadb.org/

Package: mawk
Status: install ok installed
Priority: required
Section: interpreters
Installed-Size: 292
Maintainer: Boyuan Yang <byang@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.3.4.20250131-1
Provides: awk
Depends: libc6 (>= 2.38)
Description: Pattern scanning and text processing language
 Mawk is an interpreter for the AWK Programming Language. The AWK
 language is useful for manipulation of data files, text retrieval and
 processing, and for prototyping and experimenting with algorithms. Mawk
 is a new awk meaning it implements the AWK language as defined in Aho,
 Kernighan and Weinberger, The AWK Programming Language, Addison-Wesley
 Publishing, 1988. (Hereafter referred to as the AWK book.) Mawk conforms
 to the POSIX 1003.2 (draft 11.3) definition of the AWK language
 which contains a few features not described in the AWK book, and mawk
 provides a small number of extensions.
 .
 Mawk is smaller and much faster than gawk. It has some compile-time
 limits such as NF = 32767 and sprintf buffer = 1020.
Homepage: https://invisible-island.net/mawk/

Package: mc
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1590
Maintainer: Dmitry Smirnov <onlyjob@debian.org>
Architecture: amd64
Version: 3:4.8.33-1+deb13u1
Provides: mcedit
Depends: libc6 (>= 2.38), libext2fs2t64 (>= 1.37), libglib2.0-0t64 (>= 2.78.0), libgpm2 (>= 1.20.7), libslang2 (>= 2.2.4), libssh2-1t64 (>= 1.2.8), mc-data (= 3:4.8.33-1+deb13u1)
Recommends: mailcap, perl, sensible-utils, unzip
Suggests: antiword, arc | arcanist, arj, binutils, bzip2, cabextract, catdoc, texlive-binaries, clzip | lunzip | lzd | lzip | lziprecover | minilzip | pdlzip | plzip, cpio, ctorrent, dbview, default-jdk-headless, djview4, djvulibre-bin, elinks, epub-utils | ncbi-entrez-direct, exif, file, genisoimage, gettext, ghostscript, glade, gputils, groff-base, gv, imagemagick, info, jlha-utils | lhasa, kchmviewer, libaspell-dev, libbatik-java, libchm-bin, liblz4-tool, libxml2-utils, links2, links | w3m | lynx, lyx, xz-utils, man-db, mikmod, mpg321, mplayer, odt2txt | unoconv, p7zip-full, par2, poedit | potool, poppler-utils, procyon-decompiler, python3:any, python3-boto, python3-tz, rar, rpm, sox, sqlite3, timidity, unace | unace-nonfree, unalz, unar, unrar | unrar-free, vorbis-tools, wimtools, wv, xpdf | pdf-viewer, xpmutils, zip, zstd
Conffiles:
 /etc/mc/edit.indent.rc 008c6d0205315a87a977c7cd74a1526e
 /etc/mc/filehighlight.ini a1a86f5c5a9da71d696f5893e44cc06f
 /etc/mc/mc.default.keymap 5bd8a5c94b4442efbd73194128d329bd
 /etc/mc/mc.emacs.keymap b45f6d20134b4645fa60fc000b04e1f7
 /etc/mc/mc.ext.ini 61b9a87a7235301e343ac914f0f561f6
 /etc/mc/mc.menu 5c8b37bc2cba135a37540f4d7d253832
 /etc/mc/mc.vim.keymap 4462265b3011301ca61829b53f04b110
 /etc/mc/mcedit.menu 8db98bd6c57ab17599bac4a76f61cf4d
 /etc/mc/sfs.ini ee326ba11249b6cb7fb0d7c68f98ae42
Description: Midnight Commander - a powerful file manager
 GNU Midnight Commander is a text-mode full-screen file manager. It
 uses a two panel interface and a subshell for command execution. It
 includes an internal editor with syntax highlighting and an internal
 viewer with support for binary files. Also included is Virtual
 Filesystem (VFS), that allows files on remote systems (e.g. FTP, SSH
 servers) and files inside archives to be manipulated like real files.
Homepage: https://www.midnight-commander.org

Package: mc-data
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 6277
Maintainer: Dmitry Smirnov <onlyjob@debian.org>
Architecture: all
Multi-Arch: foreign
Source: mc
Version: 3:4.8.33-1+deb13u1
Replaces: mc (<< 3:4.8.1)
Breaks: mc (<< 3:4.8.1)
Description: Midnight Commander - a powerful file manager -- data files
 GNU Midnight Commander is a text-mode full-screen file manager. It
 uses a two panel interface and a subshell for command execution. It
 includes an internal editor with syntax highlighting and an internal
 viewer with support for binary files. Also included is Virtual
 Filesystem (VFS), that allows files on remote systems (e.g. FTP, SSH
 servers) and files inside archives to be manipulated like real files.
 .
 This package provides architecture independent files
Homepage: https://www.midnight-commander.org

Package: media-types
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 98
Maintainer: Mime-Support Packagers <team+debian-mimesupport-packagers@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 13.0.0
Replaces: mime-support (<< 3.65)
Breaks: mime-support (<< 3.65)
Conffiles:
 /etc/mime.types e82584dba9cd994ba21979bdb32d746e
Description: List of standard media types and their usual file extension
 This package installs the configuration file /etc/mime.types, that lists
 standard media types (originally known as "MIME" types) and their usual file
 extension.  This provides a simple way for programs to have a first guess at a
 file's content.  On standard Debian desktop systems, one will also find more
 sophisticated tools, for instance provided by the "file" and "xdg-utils"
 packages.
 .
 The /etc/mime.types file is compiled by hand using mostly information provided
 by the Internet Assigned Numbers Authority (IANA).

Package: mesa-libgallium
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 41615
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: mesa
Version: 25.0.7-2+deb13u1
Provides: libglapi-mesa
Depends: libc6 (>= 2.38), libdrm-amdgpu1 (>= 2.4.121), libdrm-intel1 (>= 2.4.121), libdrm2 (>= 2.4.121), libelf1t64 (>= 0.142), libexpat1 (>= 2.0.1), libgcc-s1 (>= 3.4), libllvm19 (>= 1:19.1.0), libsensors5 (>= 1:3.5.0), libstdc++6 (>= 11), libx11-xcb1, libxcb-dri3-0 (>= 1.13), libxcb-present0, libxcb-randr0, libxcb-sync1, libxcb-xfixes0, libxcb1 (>= 1.9.2), libxshmfence1, libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4)
Description: shared infrastructure for Mesa drivers
 This package contains libgallium, a private library shared between
 multiple Mesa drivers. This library is an implementation detail of Mesa
 and should not be used directly by user code.
Homepage: https://mesa3d.org/

Package: mesa-va-drivers
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 47
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: mesa
Version: 25.0.7-2+deb13u1
Replaces: vdpau-va-driver (<< 0.7.4-5)
Provides: va-driver
Depends: mesa-libgallium (= 25.0.7-2+deb13u1)
Breaks: vdpau-va-driver (<< 0.7.4-5)
Enhances: libva2
Description: Mesa VA-API video acceleration drivers
 These libraries provide the Video Acceleration API (VA-API) for Unix.
 They provide accelerated video playback (incl. H.264) and video
 post-processing for the supported graphics cards.
 .
 This package enables support for VA-API for some gallium drivers.
Homepage: https://mesa3d.org/

Package: mesa-vdpau-drivers
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 62
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: mesa
Version: 25.0.7-2+deb13u1
Provides: vdpau-driver
Depends: libvdpau1
Enhances: libvdpau1
Description: Mesa VDPAU video acceleration drivers
 These libraries provide the Video Decode and Presentation API for Unix.
 They provide accelerated video playback (incl. H.264) and video
 post-processing for the supported graphics cards.
 .
 This package enables support for VDPAU for some gallium drivers.
Homepage: https://mesa3d.org/

Package: mesa-vulkan-drivers
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 81104
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: mesa
Version: 25.0.7-2+deb13u1
Provides: vulkan-icd
Depends: libvulkan1, libc6 (>= 2.39), libdrm-amdgpu1 (>= 2.4.121), libdrm2 (>= 2.4.121), libelf1t64 (>= 0.142), libexpat1 (>= 2.0.1), libgcc-s1 (>= 4.2), libllvm19 (>= 1:19.1.0), libstdc++6 (>= 11), libwayland-client0 (>= 1.23.0), libx11-xcb1, libxcb-dri3-0 (>= 1.17.0), libxcb-present0 (>= 1.17.0), libxcb-randr0 (>= 1.13), libxcb-shm0, libxcb-sync1, libxcb-xfixes0, libxcb1 (>= 1.9.2), libxshmfence1, libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4)
Description: Mesa Vulkan graphics drivers
 Vulkan is a low-overhead 3D graphics and compute API. This package
 includes Vulkan drivers provided by the Mesa project.
Homepage: https://mesa3d.org/

Package: mokutil
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 79
Maintainer: Debian UEFI Maintainers <debian-efi@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 0.7.2-1
Depends: libc6 (>= 2.34), libcrypt1 (>= 1:4.1.0), libefivar1t64 (>= 38), libkeyutils1 (>= 1.5.9), libssl3t64 (>= 3.0.0)
Description: tools for manipulating machine owner keys
 This program provides the means to enroll and erase the machine owner
 keys (MOK) stored in the database of shim.

Package: mount
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 497
Maintainer: Chris Hofstaedtler <zeha@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.41.5-0+deb13u1
Pre-Depends: libblkid1 (= 2.41.5-0+deb13u1), libc6 (>= 2.38), libmount1 (= 2.41.5-0+deb13u1), libselinux1 (>= 3.1~), libsmartcols1 (= 2.41.5-0+deb13u1)
Suggests: nfs-common
Description: tools for mounting and manipulating filesystems
 This package provides the mount(8), umount(8), swapon(8),
 swapoff(8), and losetup(8) commands.
Homepage: https://github.com/util-linux/util-linux

Package: mysql-common
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 33
Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: mysql-defaults (1.1.1)
Version: 5.8+1.1.1
Replaces: mariadb-server-5.5, mysql-common-5.6, mysql-server-5.5, percona-xtradb-cluster-common-5.5
Provides: mysql-common-5.6
Breaks: mariadb-common (<< 10.0.20-3~)
Conflicts: mariadb-server-5.5, mysql-common-5.6, mysql-server-5.5, percona-xtradb-cluster-common-5.5
Conffiles:
 /etc/mysql/conf.d/mysql.cnf 61e0993270966cc6bc96b46c01ade21f
 /etc/mysql/conf.d/mysqldump.cnf 20890decb4486ce539753193908fb356
 /etc/mysql/my.cnf.fallback cfe2bc1819d5e200eca8ca6912f714af
Description: MySQL database common files, e.g. /etc/mysql/my.cnf
 MySQL is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MySQL are speed, robustness and
 ease of use.
 .
 This package includes files needed by all versions of the client library,
 e.g. /etc/mysql/my.cnf.

Package: nano
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 2839
Maintainer: Jordi Mallach <jordi@debian.org>
Architecture: amd64
Version: 8.4-1+deb13u1
Replaces: nano-tiny (<< 2.8.6-2), pico
Depends: libc6 (>= 2.38), libncursesw6 (>= 6), libtinfo6 (>= 6)
Suggests: hunspell
Breaks: nano-tiny (<< 2.8.6-2)
Conflicts: pico
Conffiles:
 /etc/nanorc b30e7a873df86d742e539d3e3f2a3826
Description: small, friendly text editor inspired by Pico
 GNU nano is an easy-to-use text editor originally designed as a replacement
 for Pico, the ncurses-based editor from the non-free mailer package Pine
 (itself now available under the Apache License as Alpine).
 .
 However, GNU nano also implements many features missing in Pico, including:
  - undo/redo
  - line numbering
  - syntax coloring
  - soft-wrapping of overlong lines
  - selecting text by holding Shift
  - interactive search and replace (with regular expression support)
  - a go-to line (and column) command
  - support for multiple file buffers
  - auto-indentation
  - tab completion of filenames and search terms
  - toggling features while running
  - and full internationalization support
Homepage: https://www.nano-editor.org/

Package: ncdu
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 119
Maintainer: Christian Göttsche <cgzones@googlemail.com>
Architecture: amd64
Version: 1.22-1
Depends: libc6 (>= 2.34), libncursesw6 (>= 6), libtinfo6 (>= 6)
Description: ncurses disk usage viewer
 Ncdu is a ncurses-based du viewer. It provides a fast and easy-to-use interface
 through famous du utility. It allows one to browse through the directories and
 show percentages of disk usage with ncurses library.
Homepage: https://dev.yorhel.nl/ncdu/

Package: ncurses-base
Essential: yes
Status: install ok installed
Priority: required
Section: misc
Installed-Size: 389
Maintainer: Ncurses Maintainers <ncurses@packages.debian.org>
Architecture: all
Multi-Arch: foreign
Source: ncurses
Version: 6.5+20250216-2
Replaces: ncurses-term (<< 6.4+20230603)
Provides: ncurses-runtime
Breaks: cryptsetup-initramfs (<< 2:2.6.1), ncurses-term (<< 6.4+20230625), neovim (<< 0.6.0), vim-common (<< 2:9.0.1000-2)
Conffiles:
 /etc/terminfo/README 45b6df19fb5e21f55717482fa7a30171
Description: basic terminal type definitions
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains terminfo data files to support the most common types of
 terminal, including ansi, dumb, linux, rxvt, screen, sun, vt100, vt102, vt220,
 vt52, and xterm.
Homepage: https://invisible-island.net/ncurses/

Package: ncurses-bin
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 665
Maintainer: Ncurses Maintainers <ncurses@packages.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: ncurses
Version: 6.5+20250216-2
Pre-Depends: libc6 (>= 2.34), libtinfo6 (>= 6.4+20230603)
Description: terminal-related programs and man pages
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the programs used for manipulating the terminfo
 database and individual terminfo entries, as well as some programs for
 resetting terminals and such.
Homepage: https://invisible-island.net/ncurses/

Package: netbase
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 35
Maintainer: Marco d'Itri <md@linux.it>
Architecture: all
Multi-Arch: foreign
Version: 6.5
Replaces: ebtables (<< 2.0.11-2)
Breaks: ebtables (<< 2.0.11-2)
Conffiles:
 /etc/ethertypes 73ca398498fe517e724cc9238612e10d
 /etc/protocols 0c247591a720f534fe543401bd4844d6
 /etc/rpc 2d7748cd0feba2e43ee52d4d7f834188
 /etc/services c7e42bc25f943cb5e1e9e7efdbd23783
Description: Basic TCP/IP networking system
 This package provides the necessary infrastructure for basic TCP/IP based
 networking.
 .
 In particular, it supplies common name-to-number mappings in /etc/services,
 /etc/rpc, /etc/protocols and /etc/ethertypes.

Package: netcat-openbsd
Status: install ok installed
Priority: important
Section: net
Installed-Size: 109
Maintainer: Guilhem Moulin <guilhem@debian.org>
Architecture: amd64
Version: 1.229-1
Provides: netcat
Depends: libbsd0 (>= 0.2.0), libc6 (>= 2.38)
Description: TCP/IP swiss army knife
 A simple Unix utility which reads and writes data across network connections
 using TCP or UDP protocol. It is designed to be a reliable "back-end" tool
 that can be used directly or easily driven by other programs and scripts. At
 the same time it is a feature-rich network debugging and exploration tool,
 since it can create almost any kind of connection you would need and has
 several interesting built-in capabilities.
 .
 This package contains the OpenBSD rewrite of netcat, including support for
 IPv6, proxies, and Unix sockets.

Package: nethogs
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 101
Maintainer: Paulo Roberto Alves de Oliveira (aka kretcheu) <kretcheu@gmail.com>
Architecture: amd64
Version: 0.8.8-1
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.0), libncurses6 (>= 6), libpcap0.8t64 (>= 0.9.8), libstdc++6 (>= 13.1), libtinfo6 (>= 6)
Description: Net top tool grouping bandwidth per process
 NetHogs is a small 'net top' tool. Instead of breaking the traffic down per
 protocol or per subnet, like most tools do, it groups bandwidth by process.
 NetHogs does not rely on a special kernel module to be loaded.
Homepage: https://github.com/raboof/nethogs

Package: netpbm
Status: install ok installed
Priority: optional
Section: graphics
Installed-Size: 8609
Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: netpbm-free
Version: 2:11.10.02-1
Provides: pbmwbmp, pnmtopng
Depends: libnetpbm11t64 (= 2:11.10.02-1), libc6 (>= 2.38), libjpeg62-turbo (>= 1.3.1), libpng16-16t64 (>= 1.6.46), libtiff6 (>= 4.0.3), libx11-6, libxml2 (>= 2.7.4), zlib1g (>= 1:1.1.4)
Recommends: ghostscript
Description: Graphics conversion tools between image formats
 Netpbm is a toolkit for manipulation of graphic images, including
 conversion of images between a variety of different formats. There
 are over 220 separate tools in the package including converters for
 more than 80 graphics formats.
Homepage: https://netpbm.sourceforge.net/

Package: netplan-generator
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 291
Maintainer: Debian Networking Team <team+networking@tracker.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: netplan.io
Version: 1.1.2-7
Replaces: netplan.io (<< 0.106.1-8~)
Depends: libc6 (>= 2.34), libglib2.0-0t64 (>= 2.70.0), libnetplan1 (= 1.1.2-7), systemd (>= 248~)
Suggests: network-manager | wpasupplicant, openvswitch-switch, iw
Breaks: netplan.io (<< 0.106.1-8~)
Description: Declarative network configuration for various backends at boot
 Netplan reads YAML network configuration files which are written
 by administrators, installers, cloud image instantiations, or other OS
 deployments. During early boot it then generates backend specific
 configuration files in /run to hand off control of devices to a particular
 networking daemon.
 .
 Currently supported backends are networkd and NetworkManager.
 .
 This package provides a systemd-generator to configure various networking
 daemons at boot time.
Homepage: https://netplan.io/

Package: netplan.io
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 340
Maintainer: Debian Networking Team <team+networking@tracker.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.1.2-7
Depends: python3:any, libc6 (>= 2.34), libglib2.0-0t64 (>= 2.70.0), libnetplan1 (= 1.1.2-7), libsystemd0 (>= 243), ethtool, iproute2, netplan-generator, python3-netplan, python3-yaml, systemd (>= 248~), udev
Recommends: python3-rich
Suggests: systemd-resolved
Description: Declarative network configuration for various backends at runtime
 Netplan reads YAML network configuration files which are written
 by administrators, installers, cloud image instantiations, or other OS
 deployments. During early boot it then generates backend specific
 configuration files in /run to hand off control of devices to a particular
 networking daemon.
 .
 Currently supported backends are networkd and NetworkManager.
 .
 This package provides a runtime CLI to control the Netplan backends,
 e.g. to re-generate configuration or apply changes.
Homepage: https://netplan.io/

Package: nftables
Status: install ok installed
Priority: important
Section: net
Installed-Size: 185
Maintainer: Debian Netfilter Packaging Team <team+pkg-netfilter-team@tracker.debian.org>
Architecture: amd64
Version: 1.1.3-1
Depends: libnftables1 (= 1.1.3-1), libc6 (>= 2.34), libedit2 (>= 3.1-20130611-0)
Recommends: netbase
Suggests: firewalld
Conffiles:
 /etc/nftables.conf 4d4241fcd44b9a69b74f69d571f35a20
Description: Program to control packet filtering rules by Netfilter project
 This software provides an in-kernel packet classification framework that is
 based on a network-specific Virtual Machine (VM) and the nft userspace
 command line tool. The nftables framework reuses the existing Netfilter
 subsystems such as the existing hook infrastructure, the connection tracking
 system, NAT, userspace queueing and logging subsystem.
 .
 nftables replaces the old popular iptables, ip6tables, arptables and ebtables.
 .
 Netfilter software and nftables in particular are used in applications such
 as Internet connection sharing, firewalls, IP accounting, transparent
 proxying, advanced routing and traffic control.
 .
 A Linux kernel >= 3.13 is required. However, >= 4.14 is recommended.
Homepage: https://www.netfilter.org/

Package: nmap
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 4536
Maintainer: Debian Security Tools <team+pkg-security@tracker.debian.org>
Architecture: amd64
Version: 7.95+dfsg-3
Depends: nmap-common (= 7.95+dfsg-3), libc6 (>= 2.38), libgcc-s1 (>= 3.0), liblinear4 (>= 2.01+dfsg), liblua5.4-0 (>= 5.4.6), libpcap0.8t64 (>= 1.5.1), libpcre2-8-0 (>= 10.32), libssh2-1t64 (>= 1.11.0), libssl3t64 (>= 3.0.0), libstdc++6 (>= 11), zlib1g (>= 1:1.1.4)
Suggests: ncat, ndiff, zenmap
Description: The Network Mapper
 Nmap is a utility for network exploration or security auditing. It
 supports ping scanning (determine which hosts are up), many port
 scanning techniques, version detection (determine service protocols
 and application versions listening behind ports), and TCP/IP
 fingerprinting (remote host OS or device identification). Nmap also
 offers flexible target and port specification, decoy/stealth scanning,
 sunRPC scanning, and more. Most Unix and Windows platforms are
 supported in both GUI and commandline modes. Several popular handheld
 devices are also supported, including the Sharp Zaurus and the iPAQ.
Homepage: https://nmap.org/

Package: nmap-common
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 22237
Maintainer: Debian Security Tools <team+pkg-security@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Source: nmap
Version: 7.95+dfsg-3
Recommends: nmap
Description: Architecture independent files for nmap
 Nmap is a utility for network exploration or security auditing. It
 supports ping scanning (determine which hosts are up), many port
 scanning techniques, version detection (determine service protocols
 and application versions listening behind ports), and TCP/IP
 fingerprinting (remote host OS or device identification). Nmap also
 offers flexible target and port specification, decoy/stealth scanning,
 sunRPC scanning, and more. Most Unix and Windows platforms are
 supported in both GUI and commandline modes. Several popular handheld
 devices are also supported, including the Sharp Zaurus and the iPAQ.
 .
 This package contains the nmap files shared by all architectures.
Homepage: https://nmap.org/

Package: ocl-icd-libopencl1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 161
Maintainer: Debian OpenCL Maintainers <pkg-opencl-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ocl-icd
Version: 2.3.3-1
Replaces: amd-app, libopencl1, nvidia-libopencl1-dev
Provides: libopencl-1.1-1, libopencl-1.2-1, libopencl-2.0-1, libopencl-2.1-1, libopencl-2.2-1, libopencl-3.0-1, libopencl1
Depends: libc6 (>= 2.34)
Suggests: opencl-icd
Conflicts: amd-app, libopencl1, nvidia-libopencl1-dev
Description: Generic OpenCL ICD Loader
 OpenCL (Open Computing Language) is a multivendor open standard for
 general-purpose parallel programming of heterogeneous systems that include
 CPUs, GPUs and other processors.
 .
 This package contains an installable client driver loader (ICD Loader)
 library that can be used to load any (free or non-free) installable client
 driver (ICD) for OpenCL. It acts as a demultiplexer so several ICD can
 be installed and used together.
Homepage: https://github.com/OCL-dev/ocl-icd

Package: openssh-client
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 5011
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: openssh
Version: 1:10.0p1-7+deb13u4
Replaces: openssh-sk-helper, ssh, ssh-krb5
Provides: ssh-client
Depends: adduser, init-system-helpers (>= 1.66~), passwd, libc6 (>= 2.38), libedit2 (>= 2.11-20080614-0), libfido2-1 (>= 1.8.0), libgssapi-krb5-2 (>= 1.17), libselinux1 (>= 3.1~), libssl3t64 (>= 3.0.0), zlib1g (>= 1:1.1.4)
Recommends: xauth
Suggests: keychain, libpam-ssh, monkeysphere, ssh-askpass
Breaks: openssh-sk-helper
Conflicts: sftp
Conffiles:
 /etc/ssh/ssh_config 0f05748bffda634f4fb2b23dce8db1c4
Description: secure shell (SSH) client, for secure access to remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the ssh, scp and sftp clients, the ssh-agent
 and ssh-add programs to make public key authentication more convenient,
 and the ssh-keygen, ssh-keyscan, ssh-copy-id and ssh-argv0 utilities.
 .
 In some countries it may be illegal to use any encryption at all
 without a special permit.
 .
 ssh replaces the insecure rsh, rcp and rlogin programs, which are
 obsolete for most purposes.
Homepage: https://www.openssh.com/

Package: openssh-server
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 3429
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: openssh
Version: 1:10.0p1-7+deb13u4
Replaces: openssh-client (<< 1:7.9p1-8), ssh, ssh-krb5
Provides: ssh-server
Depends: libpam-modules, libpam-runtime, lsb-base, openssh-client (= 1:10.0p1-7+deb13u4), openssh-sftp-server, procps, ucf, debconf (>= 0.5) | debconf-2.0, runit-helper (>= 2.14.0~), systemd | systemd-standalone-sysusers | systemd-sysusers, libaudit1 (>= 1:2.2.1), libc6 (>= 2.38), libcom-err2 (>= 1.43.9), libcrypt1 (>= 1:4.1.0), libgssapi-krb5-2 (>= 1.17), libkrb5-3 (>= 1.13~alpha1+dfsg), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), libssl3t64 (>= 3.0.0), libwrap0 (>= 7.6-4~), libwtmpdb0 (>= 0.13.0), zlib1g (>= 1:1.1.4)
Pre-Depends: init-system-helpers (>= 1.54~)
Recommends: default-logind | logind | libpam-systemd, ncurses-term, xauth
Suggests: molly-guard, monkeysphere, ssh-askpass, ufw
Breaks: runit (<< 2.1.2-51~)
Conflicts: sftp, ssh-socks, ssh2
Conffiles:
 /etc/default/ssh 500e3cf069fe9a7b9936108eb9d9c035
 /etc/init.d/ssh 3649a6fe8c18ad1d5245fd91737de507
 /etc/pam.d/sshd 72487a556c4f0e23fd25ce21fc294ca8
 /etc/ssh/moduli c98cdde8efe28fedcde0028e61b5a53c
 /etc/sv/ssh/.meta/installed d41d8cd98f00b204e9800998ecf8427e
 /etc/sv/ssh/finish f5f032f6f3e569c821346294d410b636
 /etc/sv/ssh/log/run 63e0ec3e1080dafc68d6d71d42b150a9
 /etc/sv/ssh/run 411f69ac55d12f0c98998552846b1c78
 /etc/ufw/applications.d/openssh-server 486b78d54b93cc9fdc950c1d52ff479e
Description: secure shell (SSH) server, for secure access from remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the sshd server.
 .
 In some countries it may be illegal to use any encryption at all
 without a special permit.
 .
 sshd replaces the insecure rshd program, which is obsolete for most
 purposes.
Homepage: https://www.openssh.com/

Package: openssh-sftp-server
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 173
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: openssh
Version: 1:10.0p1-7+deb13u4
Replaces: openssh-server (<< 1:6.5p1-5)
Depends: openssh-client (= 1:10.0p1-7+deb13u4), libc6 (>= 2.38)
Recommends: openssh-server | ssh-server
Breaks: openssh-server (<< 1:6.5p1-5)
Enhances: openssh-server, ssh-server
Description: secure shell (SSH) sftp server module, for SFTP access from remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the SFTP server module for the SSH server. It
 is needed if you want to access your SSH server with SFTP. The SFTP
 server module also works with other SSH daemons like dropbear.
 .
 OpenSSH's sftp and sftp-server implement revision 3 of the SSH filexfer
 protocol described in:
 .
  http://www.openssh.com/txt/draft-ietf-secsh-filexfer-02.txt
 .
 Newer versions of the draft will not be supported, though some features
 are individually implemented as extensions.
Homepage: https://www.openssh.com/

Package: openssl
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 2510
Maintainer: Debian OpenSSL Team <pkg-openssl-devel@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: foreign
Version: 3.5.7-1~deb13u3
Depends: libc6 (>= 2.34), libssl3t64 (>= 3.5.0)
Suggests: ca-certificates
Conffiles:
 /etc/ssl/openssl.cnf bfdc30bd205b6ca2c15a46b17721c6f2
Description: Secure Sockets Layer toolkit - cryptographic utility
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 It contains the general-purpose command line binary /usr/bin/openssl,
 useful for cryptographic operations such as:
  * creating RSA, DH, and DSA key parameters;
  * creating X.509 certificates, CSRs, and CRLs;
  * calculating message digests;
  * encrypting and decrypting with ciphers;
  * testing SSL/TLS clients and servers;
  * handling S/MIME signed or encrypted mail.
Homepage: https://openssl-library.org

Package: openssl-provider-legacy
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 424
Maintainer: Debian OpenSSL Team <pkg-openssl-devel@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: foreign
Source: openssl
Version: 3.5.7-1~deb13u3
Replaces: libssl3 (<< 3.3.1-5), libssl3t64 (<< 3.3.1-5)
Depends: libc6 (>= 2.14), libssl3t64 (>= 3.0.3)
Breaks: libssl3 (<< 3.3.1-5), libssl3t64 (<< 3.3.1-5)
Description: Secure Sockets Layer toolkit - cryptographic utility
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 This package contains the legacy provider. The OpenSSL legacy provider
 supplies OpenSSL implementations of algorithms that have been deemed legacy.
 Such algorithms have commonly fallen out of use, have been deemed insecure by
 the cryptography community, or something similar.
 For details see OSSL_PROVIDER-legacy man page.
Homepage: https://openssl-library.org

Package: pahole
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1587
Maintainer: Domenico Andreoli <cavok@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: dwarves
Version: 1.30-1
Replaces: dwarves (<< 1.22)
Depends: libbpf1 (>= 1:1.5.0), libc6 (>= 2.38), libdw1t64 (>= 0.157), libelf1t64 (>= 0.142), zlib1g (>= 1:1.1.4)
Breaks: dwarves (<< 1.22)
Description: set of advanced DWARF utilities
 This package contains tools that use the DWARF debugging information
 inserted in ELF binaries by the compiler. This information is used by
 debuggers (e.g. GDB), and other tools such as systemtap.
 .
 Utilities in the dwarves suite include:
 .
  - pahole: finds alignment holes in structs and classes in languages
    such as C/C++, CPU cacheline alignment. Helps repack those structures
    to achieve more cache hits.
  - codiff: a diff like tool to compare the effects changes in source
    code generate on the resulting binaries
  - pfunct: displays all sorts of information about functions, inlines, etc.
  - pdwtags: pretty-prints DWARF information
  - pglobal: lists global symbols
  - prefcnt: counts DWARF tags usage
  - syscse: system call sign extender
  - dtagnames: lists tag names
Homepage: https://git.kernel.org/pub/scm/devel/pahole/pahole.git

Package: parted
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 122
Maintainer: Parted Maintainer Team <parted-maintainers@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: foreign
Version: 3.6-5
Depends: libparted2t64 (= 3.6-5), libc6 (>= 2.38), libreadline8t64 (>= 6.0), libtinfo6 (>= 6), libuuid1 (>= 2.16)
Suggests: parted-doc
Conflicts: parted-doc (<< 3.5-2~)
Description: disk partition manipulator
 GNU Parted is a program that allows you to create, destroy, resize,
 move, and copy disk partitions. This is useful for creating space
 for new operating systems, reorganizing disk usage, and copying data
 to new hard disks.
 .
 This package contains the binary and manual page. Further
 documentation is available in parted-doc.
 .
 Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS, and PC98
 partitioning formats, as well as a "loop" (raw disk) type which
 allows use on RAID/LVM. It can detect and remove ASFS/AFFS/APFS,
 Btrfs, ext2/3/4, FAT16/32, HFS, JFS, linux-swap, UFS, XFS, and ZFS
 file systems. Parted also has the ability to create and modify file
 systems of some of these types, but using it to perform file system
 operations is now deprecated.
 .
 The nature of this software means that any bugs could cause massive
 data loss. While there are no such bugs known at the moment, they
 could exist, so please back up all important files before running
 it, and do so at your own risk.
Homepage: https://www.gnu.org/software/parted

Package: passwd
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 4758
Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: shadow
Version: 1:4.17.4-2
Replaces: login (<< 1:4.16.0-2~)
Depends: base-passwd (>= 3.6.4), libpam-modules, login.defs, libacl1 (>= 2.2.23), libattr1 (>= 1:2.4.44), libaudit1 (>= 1:2.2.1), libbsd0 (>= 0.11.0), libc6 (>= 2.38), libcrypt1 (>= 1:4.1.0), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), libsemanage2 (>= 2.0.32)
Recommends: sensible-utils
Conffiles:
 /etc/default/useradd e03965d134c26725cbc51a57969da6c9
 /etc/pam.d/chfn 4d466e00a348ba426130664d795e8afa
 /etc/pam.d/chpasswd 9900720564cb4ee98b7da29e2d183cb2
 /etc/pam.d/chsh a6e9b589e90009334ffd030d819290a6
 /etc/pam.d/newusers 1454e29bfa9f2a10836563e76936cea5
 /etc/pam.d/passwd eaf2ad85b5ccd06cceb19a3e75f40c63
Description: change and administer password and group data
 This package includes passwd, chsh, chfn, and many other programs to
 maintain password and group data.
 .
 Shadow passwords are supported.  See /usr/share/doc/passwd/README.Debian
Homepage: https://github.com/shadow-maint/shadow

Package: patch
Status: install ok installed
Priority: optional
Section: vcs
Installed-Size: 242
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.8-2
Depends: libc6 (>= 2.34)
Suggests: ed, diffutils-doc
Description: Apply a diff file to an original
 Patch will take a patch file containing any of the four forms
 of difference listing produced by the diff program and apply
 those differences to an original file, producing a patched
 version.
Homepage: https://savannah.gnu.org/projects/patch/

Package: pci.ids
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1509
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.0~2025.06.09-1
Replaces: pciutils (<< 1:3.6.2-4~)
Breaks: pciutils (<< 1:3.6.2-4~)
Description: PCI ID Repository
 This package contains the pci.ids file, a public repository of all known
 ID's used in PCI devices: ID's of vendors, devices, subsystems and device
 classes. It is used in various programs to display full human-readable
 names instead of cryptic numeric codes.
Homepage: https://pci-ids.ucw.cz/

Package: pciutils
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 266
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1:3.13.0-2
Depends: libc6 (>= 2.34), libkmod2 (>= 5~), libpci3 (= 1:3.13.0-2)
Suggests: bzip2, wget | curl | lynx
Description: PCI utilities
 This package contains various utilities for inspecting and setting of
 devices connected to the PCI bus.
Homepage: https://mj.ucw.cz/sw/pciutils/

Package: perl
Status: install ok installed
Priority: standard
Section: perl
Installed-Size: 841
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: amd64
Multi-Arch: allowed
Version: 5.40.1-6+deb13u1
Replaces: perl-base (<< 5.36.0-2), perl-modules (<< 5.22.0~)
Provides: libansicolor-perl (= 5.01), libarchive-tar-perl (= 3.02.001), libattribute-handlers-perl (= 1.03), libautodie-perl (= 2.37), libcompress-raw-bzip2-perl (= 2.212), libcompress-raw-zlib-perl (= 2.212), libcompress-zlib-perl (= 2.212), libcpan-meta-perl (= 2.150010), libcpan-meta-requirements-perl (= 2.143), libcpan-meta-yaml-perl (= 0.018), libdigest-md5-perl (= 2.58.01), libdigest-perl (= 1.20), libdigest-sha-perl (= 6.04), libencode-perl (= 3.21), libexperimental-perl (= 0.032), libextutils-cbuilder-perl (= 0.280240), libextutils-command-perl (= 7.70), libextutils-install-perl (= 2.22), libextutils-parsexs-perl (= 3.510000), libfile-spec-perl (= 3.9100), libhttp-tiny-perl (= 0.088), libi18n-langtags-perl (= 0.45), libio-compress-base-perl (= 2.212), libio-compress-bzip2-perl (= 2.212), libio-compress-perl (= 2.212), libio-compress-zlib-perl (= 2.212), libio-zlib-perl (= 1.15), libjson-pp-perl (= 4.16000), liblocale-maketext-perl (= 1.33), liblocale-maketext-simple-perl (= 0.21.01), libmath-bigint-perl (= 2.003002), libmath-complex-perl (= 1.6200), libmime-base64-perl (= 3.16.01), libmodule-corelist-perl (= 5.20250118.40), libmodule-load-conditional-perl (= 0.74), libmodule-load-perl (= 0.36), libmodule-metadata-perl (= 1.000038), libnet-perl (= 1:3.15), libnet-ping-perl (= 2.76), libparams-check-perl (= 0.38), libparent-perl (= 0.241), libparse-cpan-meta-perl (= 2.150010), libperl-ostype-perl (= 1.010), libpod-escapes-perl (= 1.07), libpod-simple-perl (= 3.45), libstorable-perl (= 3.32), libsys-syslog-perl (= 0.36), libterm-table-perl (= 0.018), libtest-harness-perl (= 3.48), libtest-simple-perl (= 1.302199), libtest-tester-perl (= 1.302199), libtest-use-ok-perl (= 1.302199), libtext-balanced-perl (= 2.06), libthread-queue-perl (= 3.14), libthreads-perl (= 2.40), libthreads-shared-perl (= 1.69), libtime-hires-perl (= 1.9777), libtime-local-perl (= 1.3500), libtime-piece-perl (= 1.3401.01), libunicode-collate-perl (= 1.31), libversion-perl (= 1:0.9930), libversion-requirements-perl, podlators-perl (= 5.01.02)
Depends: perl-base (= 5.40.1-6+deb13u1), perl-modules-5.40 (>= 5.40.1-6+deb13u1), libperl5.40 (= 5.40.1-6+deb13u1)
Recommends: netbase
Suggests: perl-doc, libterm-readline-gnu-perl | libterm-readline-perl-perl, make, libtap-harness-archive-perl
Breaks: apt-show-versions (<< 0.22.10), libdist-inkt-perl (<< 0.024-5), libmarc-charset-perl (<< 1.35-3), libperl-dev (<< 5.24.0~), perl-doc (<< 5.40.1-1), perl-modules-5.22, perl-modules-5.24, perl-modules-5.26 (<< 5.26.2-5)
Conflicts: libjson-pp-perl (<< 2.27200-2)
Conffiles:
 /etc/perl/Net/libnet.cfg fb2946cae573b8ed3d654a180d458733
Description: Larry Wall's Practical Extraction and Report Language
 Perl is a highly capable, feature-rich programming language with over
 20 years of development. Perl 5 runs on over 100 platforms from
 portables to mainframes. Perl is suitable for both rapid prototyping
 and large scale development projects.
 .
 Perl 5 supports many programming styles, including procedural,
 functional, and object-oriented. In addition to this, it is supported
 by an ever-growing collection of reusable modules which accelerate
 development. Some of these modules include Web frameworks, database
 integration, networking protocols, and encryption. Perl provides
 interfaces to C and C++ for custom extension development.
Homepage: https://dev.perl.org/perl5/

Package: perl-base
Essential: yes
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 7815
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: amd64
Source: perl
Version: 5.40.1-6+deb13u1
Replaces: libfile-path-perl (<< 2.18), libfile-temp-perl (<< 0.2311), libio-socket-ip-perl (<< 0.42), libscalar-list-utils-perl (<< 1:1.63), libsocket-perl (<< 2.038), libxsloader-perl (<< 0.32), perl (<< 5.10.1-12), perl-modules (<< 5.20.1-3)
Provides: libfile-path-perl (= 2.18), libfile-temp-perl (= 0.2311), libio-socket-ip-perl (= 0.42), libscalar-list-utils-perl (= 1:1.63), libsocket-perl (= 2.038), libxsloader-perl (= 0.32), perlapi-5.40.0, perlapi-5.40.1
Pre-Depends: libc6 (>= 2.38), libcrypt1 (>= 1:4.1.0)
Suggests: perl, sensible-utils
Breaks: amanda-common (<< 1:3.3.9-2), backuppc (<< 4.4.0-7~), bucardo (<< 5.5.0-1.1), debconf (<< 1.5.61), dh-haskell (<< 0.3), duck (<< 0.14.1), intltool (<< 0.51.0-4), kio-perldoc (<< 20.04.1-1), latexml (<< 0.8.4-2), libdevel-mat-dumper-perl (<< 0.42-3), libencode-arabic-perl (<< 14.2-2), libexception-class-perl (<< 1.42), libfile-path-perl (<< 2.18), libfile-spec-perl (<< 3.9100), libfile-temp-perl (<< 0.2311), libgnupg-interface-perl (<< 1.02-4), libio-socket-ip-perl (<< 0.42), liblexical-failure-perl (<< 0.001000), libmp3-tag-perl (<< 1.13-1.2), libnumber-format-perl (<< 1.76), libsbuild-perl (<< 0.67.0-1), libscalar-list-utils-perl (<< 1:1.63), libsocket-perl (<< 2.038), libur-perl (<< 0.470+ds-3), libxsloader-perl (<< 0.32), mailagent (<< 1:3.1-81-2), perl (<< 5.40.1~), perl-modules (<< 5.40.1~), pod2pdf (<< 0.42-5.1), slic3r (<< 1.2.9+dfsg-6.1), slic3r-prusa (<< 1.37.0+dfsg-1.1), texinfo (<< 6.1.0.dfsg.1-8)
Conflicts: defoma (<< 0.11.12), doc-base (<< 0.10.3), mono-gac (<< 2.10.8.1-3), safe-rm (<< 0.8), update-inetd (<< 4.41)
Description: minimal Perl system
 Perl is a scripting language used in many system scripts and utilities.
 .
 This package provides a Perl interpreter and the small subset of the
 standard run-time library required to perform basic tasks. For a full
 Perl installation, install "perl" (and its dependencies, "perl-modules-5.40"
 and "perl-doc").
Homepage: https://dev.perl.org/perl5/

Package: perl-modules-5.36
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 17821
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: all
Multi-Arch: foreign
Source: perl
Version: 5.36.0-7+deb12u4
Replaces: libansicolor-perl (<< 5.01), libarchive-tar-perl (<< 2.40), libattribute-handlers-perl (<< 1.02), libautodie-perl (<< 2.34), libcpan-meta-perl (<< 2.150010), libcpan-meta-requirements-perl (<< 2.140), libcpan-meta-yaml-perl (<< 0.018), libdigest-perl (<< 1.20), libexperimental-perl (<< 0.028), libextutils-cbuilder-perl (<< 0.280236), libextutils-command-perl (<< 7.64), libextutils-install-perl (<< 2.20), libextutils-parsexs-perl (<< 3.450000), libfile-spec-perl (<< 3.8400), libhttp-tiny-perl (<< 0.080), libi18n-langtags-perl (<< 0.45), libio-zlib-perl (<< 1.11), libjson-pp-perl (<< 4.07000), liblocale-maketext-perl (<< 1.31), liblocale-maketext-simple-perl (<< 0.21.01), libmath-bigint-perl (<< 1.999830), libmath-complex-perl (<< 1.5902), libmodule-corelist-perl (<< 5.20220520), libmodule-load-conditional-perl (<< 0.74), libmodule-load-perl (<< 0.36), libmodule-metadata-perl (<< 1.000037), libnet-perl (<< 1:3.14), libnet-ping-perl (<< 2.74), libparams-check-perl (<< 0.38), libparent-perl (<< 0.238), libparse-cpan-meta-perl (<< 2.150010), libperl-ostype-perl (<< 1.010), libpod-escapes-perl (<< 1.07), libpod-simple-perl (<< 3.43), libtest-harness-perl (<< 3.44), libtest-simple-perl (<< 1.302190), libtest-tester-perl (<< 1.302190), libtest-use-ok-perl (<< 1.302190), libtext-balanced-perl (<< 2.04), libthread-queue-perl (<< 3.14), libtime-local-perl (<< 1.3000), libunicode-collate-perl (<< 1.31), libversion-perl (<< 1:0.9929), perl-base (<< 5.22.0~), perl-modules, podlators-perl (<< 4.14)
Provides: perl-modules
Depends: perl-base (>= 5.36.0-1)
Pre-Depends: dpkg (>= 1.17.17)
Recommends: perl (>= 5.36.0-1)
Breaks: libansicolor-perl (<< 5.01), libarchive-tar-perl (<< 2.40), libattribute-handlers-perl (<< 1.02), libautodie-perl (<< 2.34), libcpan-meta-perl (<< 2.150010), libcpan-meta-requirements-perl (<< 2.140), libcpan-meta-yaml-perl (<< 0.018), libdigest-perl (<< 1.20), libexperimental-perl (<< 0.028), libextutils-cbuilder-perl (<< 0.280236), libextutils-command-perl (<< 7.64), libextutils-install-perl (<< 2.20), libextutils-parsexs-perl (<< 3.450000), libfile-spec-perl (<< 3.8400), libhttp-tiny-perl (<< 0.080), libi18n-langtags-perl (<< 0.45), libio-zlib-perl (<< 1.11), libjson-pp-perl (<< 4.07000), liblocale-maketext-perl (<< 1.31), liblocale-maketext-simple-perl (<< 0.21.01), libmath-bigint-perl (<< 1.999830), libmath-complex-perl (<< 1.5902), libmodule-corelist-perl (<< 5.20220520), libmodule-load-conditional-perl (<< 0.74), libmodule-load-perl (<< 0.36), libmodule-metadata-perl (<< 1.000037), libnet-perl (<< 1:3.14), libnet-ping-perl (<< 2.74), libparams-check-perl (<< 0.38), libparent-perl (<< 0.238), libparse-cpan-meta-perl (<< 2.150010), libperl-ostype-perl (<< 1.010), libpod-escapes-perl (<< 1.07), libpod-simple-perl (<< 3.43), libtest-harness-perl (<< 3.44), libtest-simple-perl (<< 1.302190), libtest-tester-perl (<< 1.302190), libtest-use-ok-perl (<< 1.302190), libtext-balanced-perl (<< 2.04), libthread-queue-perl (<< 3.14), libtime-local-perl (<< 1.3000), libunicode-collate-perl (<< 1.31), libversion-perl (<< 1:0.9929), maildirsync (<< 1.2-2.1), perl (<< 5.36.0~), podlators-perl (<< 4.14)
Conflicts: perl-modules (<< 5.22.0~)
Description: Core Perl modules
 Architecture independent Perl modules.  These modules are part of Perl and
 required if the `perl' package is installed.
 .
 Note that this package only exists to save archive space and should be
 considered an internal implementation detail of the `perl' package.
 Other packages should not depend on `perl-modules-5.36' directly, they
 should use `perl' (which depends on `perl-modules-5.36') instead.
Homepage: http://dev.perl.org/perl5/

Package: perl-modules-5.40
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 19993
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: all
Multi-Arch: foreign
Source: perl
Version: 5.40.1-6+deb13u1
Replaces: libansicolor-perl (<< 5.01), libarchive-tar-perl (<< 3.02.001), libattribute-handlers-perl (<< 1.03), libautodie-perl (<< 2.37), libcpan-meta-perl (<< 2.150010), libcpan-meta-requirements-perl (<< 2.143), libcpan-meta-yaml-perl (<< 0.018), libdigest-perl (<< 1.20), libexperimental-perl (<< 0.032), libextutils-cbuilder-perl (<< 0.280240), libextutils-command-perl (<< 7.70), libextutils-install-perl (<< 2.22), libextutils-parsexs-perl (<< 3.510000), libfile-spec-perl (<< 3.9100), libhttp-tiny-perl (<< 0.088), libi18n-langtags-perl (<< 0.45), libio-zlib-perl (<< 1.15), libjson-pp-perl (<< 4.16000), liblocale-maketext-perl (<< 1.33), liblocale-maketext-simple-perl (<< 0.21.01), libmath-bigint-perl (<< 2.003002), libmath-complex-perl (<< 1.6200), libmodule-corelist-perl (<< 5.20250118.40), libmodule-load-conditional-perl (<< 0.74), libmodule-load-perl (<< 0.36), libmodule-metadata-perl (<< 1.000038), libnet-perl (<< 1:3.15), libnet-ping-perl (<< 2.76), libparams-check-perl (<< 0.38), libparent-perl (<< 0.241), libparse-cpan-meta-perl (<< 2.150010), libperl-ostype-perl (<< 1.010), libpod-escapes-perl (<< 1.07), libpod-simple-perl (<< 3.45), libterm-table-perl (<< 0.018), libtest-harness-perl (<< 3.48), libtest-simple-perl (<< 1.302199), libtest-tester-perl (<< 1.302199), libtest-use-ok-perl (<< 1.302199), libtest2-suite-perl (<< 0.000162), libtext-balanced-perl (<< 2.06), libthread-queue-perl (<< 3.14), libtime-local-perl (<< 1.3500), libunicode-collate-perl (<< 1.31), libversion-perl (<< 1:0.9930), perl-base (<< 5.22.0~), perl-modules, podlators-perl (<< 5.01.02)
Provides: perl-modules
Depends: perl-base (>= 5.40.1-1)
Recommends: perl (>= 5.40.1-1)
Breaks: libansicolor-perl (<< 5.01), libarchive-tar-perl (<< 3.02.001), libattribute-handlers-perl (<< 1.03), libautodie-perl (<< 2.37), libcpan-meta-perl (<< 2.150010), libcpan-meta-requirements-perl (<< 2.143), libcpan-meta-yaml-perl (<< 0.018), libdigest-perl (<< 1.20), libexperimental-perl (<< 0.032), libextutils-cbuilder-perl (<< 0.280240), libextutils-command-perl (<< 7.70), libextutils-install-perl (<< 2.22), libextutils-parsexs-perl (<< 3.510000), libfile-spec-perl (<< 3.9100), libhttp-tiny-perl (<< 0.088), libi18n-langtags-perl (<< 0.45), libio-zlib-perl (<< 1.15), libjson-pp-perl (<< 4.16000), liblocale-maketext-perl (<< 1.33), liblocale-maketext-simple-perl (<< 0.21.01), libmath-bigint-perl (<< 2.003002), libmath-complex-perl (<< 1.6200), libmodule-corelist-perl (<< 5.20250118.40), libmodule-load-conditional-perl (<< 0.74), libmodule-load-perl (<< 0.36), libmodule-metadata-perl (<< 1.000038), libnet-perl (<< 1:3.15), libnet-ping-perl (<< 2.76), libparams-check-perl (<< 0.38), libparent-perl (<< 0.241), libparse-cpan-meta-perl (<< 2.150010), libperl-ostype-perl (<< 1.010), libpod-escapes-perl (<< 1.07), libpod-simple-perl (<< 3.45), libterm-table-perl (<< 0.018), libtest-harness-perl (<< 3.48), libtest-simple-perl (<< 1.302199), libtest-tester-perl (<< 1.302199), libtest-use-ok-perl (<< 1.302199), libtest2-suite-perl (<< 0.000162), libtext-balanced-perl (<< 2.06), libthread-queue-perl (<< 3.14), libtime-local-perl (<< 1.3500), libunicode-collate-perl (<< 1.31), libversion-perl (<< 1:0.9930), maildirsync (<< 1.2-2.1), perl (<< 5.40.1~), podlators-perl (<< 5.01.02)
Conflicts: perl-modules (<< 5.22.0~)
Description: Core Perl modules
 Architecture independent Perl modules.  These modules are part of Perl and
 required if the `perl' package is installed.
 .
 Note that this package only exists to save archive space and should be
 considered an internal implementation detail of the `perl' package.
 Other packages should not depend on `perl-modules-5.40' directly, they
 should use `perl' (which depends on `perl-modules-5.40') instead.
Homepage: https://dev.perl.org/perl5/

Package: perl-openssl-defaults
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 27
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: perl-openssl-defaults (7)
Version: 7+b2
Provides: dh-sequence-perl-openssl, perl-openssl-abi-3
Depends: libc6 (>= 2.34), libssl3t64 (>= 3.0.0)
Suggests: debhelper
Description: version compatibility baseline for Perl OpenSSL packages
 A subset of Perl XS module packages expose the OpenSSL binary interface
 to Perl code. This can lead to incompatibilities if these packages are
 linked against different versions of OpenSSL.
 .
 This package provides a virtual package "perl-openssl-abi-x" that
 corresponds to the libssl-dev package SONAME it was built against.
 The packages that need to stay compatible with each other can depend
 on this.
 .
 Tools are also provided for generating this dependency with minimum
 hassle. See the instructions in README.Debian.

Package: php
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 10
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Source: php-defaults (96)
Version: 2:8.4+96
Depends: php8.4
Description: server-side, HTML-embedded scripting language (default)
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
 .
 This package is a dependency package, which depends on latest stable
 PHP version (currently 8.4).

Package: php-apcu
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 13
Maintainer: Debian PHP PECL Maintainers <team+php-pecl@tracker.debian.org>
Architecture: all
Version: 5.1.24-1
Depends: php8.4-apcu
Pre-Depends: php-common (>= 2:69~)
Suggests: php-gd
Conflicts: php-xcache, php-yac
Description: APC User Cache for PHP
 The APCu is userland caching: APC (Alternative PHP Cache) stripped of
 opcode caching after the deployment of Zend OpCache in PHP 5.5 as the
 primary solution to opcode caching in future versions of PHP.
 .
 The APCu is a fast solution for userland caching (and dumping) of PHP
 variables locally, it is not distributed like MemcacheD, but they can
 be used together for optimal caching.
 .
 This is empty package that depends on default PHP version.
Homepage: https://pecl.php.net/package/APCu

Package: php-bcmath
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 10
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Source: php-defaults (96)
Version: 2:8.4+96
Depends: php-common, php8.4-bcmath
Description: Bcmath module for PHP [default]
 This package provides a Bcmath module for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
 .
 This package is a dependency package, which depends on Debian's default
 PHP version (currently 8.4).

Package: php-cli
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 21
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Source: php-defaults (96)
Version: 2:8.4+96
Depends: php8.4-cli
Description: command-line interpreter for the PHP scripting language (default)
 This package provides the /usr/bin/php command interpreter, useful for
 testing PHP scripts from a shell or performing general shell scripting tasks.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
 .
 This package is a dependency package, which depends on latest stable
 PHP version (currently 8.4).

Package: php-common
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 69
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Source: php-defaults (96)
Version: 2:96
Depends: psmisc (>= 22.15-1~)
Breaks: php-amqp (<< 2.1.2-5~), php-apcu (<< 5.1.24-1~), php-ast (<< 1.1.2-3~), php-ds (<< 1.5.0-5~), php-excimer (<< 1.2.3-1~), php-gearman (<< 2.1.2-4~), php-gmagick (<< 2.0.6~rc1++-5~), php-gnupg (<< 1.5.1-6~), php-igbinary (<< 3.2.16-4~), php-imagick (<< 3.7.0-12~), php-imap (<< 3:1.0.3-1), php-libvirt-php (<< 0.5.8-7~), php-mailparse (<< 3.1.8-1~), php-maxminddb (<< 1.12.0-1~), php-mcrypt (<< 3:1.0.7-5~), php-memcache (<< 8.2-5~), php-memcached (<< 3.3.0-3~), php-mongodb (<< 1.20.1-1~), php-msgpack (<< 1:3.0.0-1~), php-oauth (<< 2.0.9-1~), php-pcov (<< 1.0.11-9~), php-pecl-http (<< 4.2.6-3~), php-pq (<< 2.2.3-5~), php-ps (<< 1.4.4++-4~), php-pspell (<< 3:1.0.1-3~), php-psr (<< 1.2.0-9~), php-raphf (<< 2.0.1++-4~), php-redis (<< 6.1.0-3~), php-rrd (<< 2.0.3++-5~), php-smbclient (<< 1.1.2-3~), php-solr (<< 2.7.0-4~), php-ssh2 (<< 1.4.1-4~), php-stomp (<< 2.0.3-5~), php-uopz (<< 7.1.1++-4~), php-uploadprogress (<< 2.0.2++-4~), php-uuid (<< 1.2.1-2~), php-xdebug (<< 3.4.0-2~), php-xmlrpc (<< 3:1.0.0~rc3-10~), php-yac (<< 2.3.1++-4~), php-yaml (<< 2.2.4-1~), php-zmq (<< 1.1.3-30~), php-zstd (<< 0.14.0-1~), php5.6-common, php7.0-common, php7.1-common, php7.2-common, php7.3-common, php7.4-common, php8.0-common, php8.1-common, php8.2-common, php8.3-common
Conffiles:
 /etc/cron.d/php e6fa2d74078ac0ac6fd730decf3b3736
Description: Common files for PHP packages
 This package contains common utilities shared among all packaged PHP
 versions.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.

Package: php-curl
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 10
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Source: php-defaults (96)
Version: 2:8.4+96
Depends: php-common, php8.4-curl
Description: CURL module for PHP [default]
 This package provides a CURL module for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
 .
 This package is a dependency package, which depends on Debian's default
 PHP version (currently 8.4).

Package: php-gd
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 10
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Source: php-defaults (96)
Version: 2:8.4+96
Depends: php-common, php8.4-gd
Description: GD module for PHP [default]
 This package provides a GD module for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
 .
 This package is a dependency package, which depends on Debian's default
 PHP version (currently 8.4).

Package: php-gmp
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 10
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Source: php-defaults (96)
Version: 2:8.4+96
Depends: php-common, php8.4-gmp
Description: GMP module for PHP [default]
 This package provides a GMP module for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
 .
 This package is a dependency package, which depends on Debian's default
 PHP version (currently 8.4).

Package: php-imagick
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 18
Maintainer: Debian PHP PECL Maintainers <team+php-pecl@tracker.debian.org>
Architecture: all
Version: 3.8.0-2
Depends: php8.4-imagick
Pre-Depends: php-common (>= 2:69~)
Recommends: fonts-dejavu-core, ghostscript
Description: Provides a wrapper to the ImageMagick library
 Imagick is a native php extension to create and modify images using the
 ImageMagick API.
 .
 This is empty package that depends on default PHP version.
Homepage: http://pecl.php.net/package/imagick

Package: php-intl
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 10
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Source: php-defaults (96)
Version: 2:8.4+96
Depends: php-common, php8.4-intl
Description: Internationalisation module for PHP [default]
 This package provides a Internationalisation module for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
 .
 This package is a dependency package, which depends on Debian's default
 PHP version (currently 8.4).

Package: php-json
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 10
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Source: php-defaults (96)
Version: 2:8.4+96
Depends: php-common, php8.4-json
Description: JSON module for PHP [default]
 This package provides a JSON module for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
 .
 This package is a dependency package, which depends on Debian's default
 PHP version (currently 8.4).

Package: php-ldap
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 10
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Source: php-defaults (96)
Version: 2:8.4+96
Depends: php-common, php8.4-ldap
Description: LDAP module for PHP [default]
 This package provides a LDAP module for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
 .
 This package is a dependency package, which depends on Debian's default
 PHP version (currently 8.4).

Package: php-mbstring
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 10
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Source: php-defaults (96)
Version: 2:8.4+96
Depends: php-common, php8.4-mbstring
Description: MBSTRING module for PHP [default]
 This package provides a MBSTRING module for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
 .
 This package is a dependency package, which depends on Debian's default
 PHP version (currently 8.4).

Package: php-mysql
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 10
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Source: php-defaults (96)
Version: 2:8.4+96
Depends: php-common, php8.4-mysql
Description: MySQL module for PHP [default]
 This package provides a MySQL module for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
 .
 This package is a dependency package, which depends on Debian's default
 PHP version (currently 8.4).

Package: php-redis
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 13
Maintainer: Debian PHP PECL Maintainers <team+php-pecl@tracker.debian.org>
Architecture: all
Version: 6.2.0-1
Depends: php8.4-redis, php-igbinary
Pre-Depends: php-common (>= 2:69~)
Suggests: redis-server
Description: PHP extension for interfacing with Redis
 This extension allows php applications to communicate with the Redis
 persistent key-value store.  The php-redis module provides an easy
 object oriented interface.
 .
 This is empty package that depends on default PHP version.
Homepage: https://pecl.php.net/package/redis

Package: php-xml
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 10
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Source: php-defaults (96)
Version: 2:8.4+96
Depends: php-common, php8.4-xml
Description: DOM, SimpleXML, WDDX, XML, and XSL module for PHP [default]
 This package provides a DOM, SimpleXML, WDDX, XML, and XSL module for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
 .
 This package is a dependency package, which depends on Debian's default
 PHP version (currently 8.4).

Package: php-zip
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 10
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Source: php-defaults (96)
Version: 2:8.4+96
Depends: php-common, php8.4-zip
Description: Zip module for PHP [default]
 This package provides a Zip module for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
 .
 This package is a dependency package, which depends on Debian's default
 PHP version (currently 8.4).

Package: php8.2-apcu
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 174
Maintainer: Debian PHP PECL Maintainers <team+php-pecl@tracker.debian.org>
Architecture: amd64
Source: php-apcu
Version: 5.1.22+4.0.11-2
Config-Version: 5.1.22+4.0.11-2
Replaces: php-apcu (<< 5.1.22+4.0.11-2~)
Provides: php-apcu
Depends: php8.2-common, phpapi-20220829, libc6 (>= 2.34)
Pre-Depends: php-common (>= 2:69~)
Suggests: php-gd
Breaks: php-apcu (<< 5.1.22+4.0.11-2~)
Conflicts: php-xcache, php-yac
Conffiles:
 /etc/php/8.2/mods-available/apcu.ini 63cdaa57c6c9a68ce51c0862bc1b74a0
Description: APC User Cache for PHP
 The APCu is userland caching: APC (Alternative PHP Cache) stripped of
 opcode caching after the deployment of Zend OpCache in PHP 5.5 as the
 primary solution to opcode caching in future versions of PHP.
 .
 The APCu is a fast solution for userland caching (and dumping) of PHP
 variables locally, it is not distributed like MemcacheD, but they can
 be used together for optimal caching.
Homepage: https://pecl.php.net/package/APCu

Package: php8.2-bcmath
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 68
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.34-1~deb12u1
Config-Version: 8.2.34-1~deb12u1
Provides: php-bcmath
Depends: php-common (>= 1:81~), ucf, php8.2-common (= 8.2.34-1~deb12u1), libc6 (>= 2.14)
Description: Bcmath module for PHP
 This package provides the Bcmath module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.2-cli
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 5589
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.34-1~deb12u1
Config-Version: 8.2.34-1~deb12u1
Provides: php-cli, php-json, php8.2-json, phpapi-20220829
Depends: libedit2 (>= 2.11-20080614-4), libmagic1, media-types | mime-support, php8.2-common (= 8.2.34-1~deb12u1), php8.2-opcache, php8.2-readline, tzdata, ucf, libargon2-1 (>= 0~20171227), libc6 (>= 2.35), libpcre2-8-0 (>= 10.32), libsodium23 (>= 1.0.18), libssl3 (>= 3.0.0), libxml2 (>= 2.8.0), zlib1g (>= 1:1.1.4)
Suggests: php-pear
Description: command-line interpreter for the PHP scripting language
 This package provides the /usr/bin/php8.2 command interpreter, useful for
 testing PHP scripts from a shell or performing general shell scripting tasks.
 .
 The following extensions are built in: Core date filter hash json libxml
 openssl pcntl pcre random Reflection session sodium SPL standard zlib.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.2-common
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 8454
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.34-1~deb12u1
Config-Version: 8.2.34-1~deb12u1
Provides: php-calendar, php-ctype, php-exif, php-ffi, php-fileinfo, php-ftp, php-iconv, php-pdo, php-phar, php-posix, php-shmop, php-sockets, php-sysvmsg, php-sysvsem, php-sysvshm, php-tokenizer, php8.2-calendar, php8.2-ctype, php8.2-exif, php8.2-ffi, php8.2-fileinfo, php8.2-ftp, php8.2-gettext, php8.2-iconv, php8.2-pdo, php8.2-phar, php8.2-posix, php8.2-shmop, php8.2-sockets, php8.2-sysvmsg, php8.2-sysvsem, php8.2-sysvshm, php8.2-tokenizer
Depends: php-common (>= 1:81~), ucf, libc6 (>= 2.34), libffi8 (>= 3.4), libssl3 (>= 3.0.0)
Breaks: gforge-common (<< 6), php7.0-curl (<< 7.0.33-1~), php7.2-sodium (<< 7.2.12~)
Description: documentation, examples and common module for PHP
 This package provides the documentation, examples and common module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.2-curl
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 148
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.34-1~deb12u1
Config-Version: 8.2.34-1~deb12u1
Provides: php-curl
Depends: php-common (>= 1:81~), ucf, php8.2-common (= 8.2.34-1~deb12u1), libc6 (>= 2.14), libcurl4 (>= 7.63.0)
Breaks: php7.0-curl (<< 7.0.33-1~)
Description: CURL module for PHP
 This package provides the CURL module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.2-gd
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 136
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.34-1~deb12u1
Config-Version: 8.2.34-1~deb12u1
Provides: php-gd
Depends: php-common (>= 1:81~), ucf, php8.2-common (= 8.2.34-1~deb12u1), libc6 (>= 2.4), libgd3 (>= 2.3.3)
Description: GD module for PHP
 This package provides the GD module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.2-gmp
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 104
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.34-1~deb12u1
Config-Version: 8.2.34-1~deb12u1
Provides: php-gmp
Depends: php-common (>= 1:81~), ucf, php8.2-common (= 8.2.34-1~deb12u1), libc6 (>= 2.4), libgmp10 (>= 2:6.2.1+dfsg1)
Description: GMP module for PHP
 This package provides the GMP module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.2-igbinary
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 117
Maintainer: Debian PHP PECL Maintainers <team+php-pecl@tracker.debian.org>
Architecture: amd64
Source: php-igbinary
Version: 3.2.13-1
Config-Version: 3.2.13-1
Replaces: php-igbinary (<< 3.2.13-1~)
Provides: php-igbinary
Depends: php8.2-common, phpapi-20220829, libc6 (>= 2.14)
Pre-Depends: php-common (>= 2:69~)
Breaks: php-igbinary (<< 3.2.13-1~)
Conffiles:
 /etc/php/8.2/mods-available/igbinary.ini 14c4abd8fcffef929339f328f10f6e80
Description: igbinary PHP serializer
 Igbinary is a drop in replacement for the standard PHP serializer.
 Instead of time and space consuming textual representation, igbinary
 stores PHP data structures in a compact binary form.  Savings are
 significant when using memcached or similar memory based storages for
 serialized data.
Homepage: http://pecl.php.net/package/igbinary

Package: php8.2-imagick
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 480
Maintainer: Debian PHP PECL Maintainers <team+php-pecl@tracker.debian.org>
Architecture: amd64
Source: php-imagick
Version: 3.7.0-4
Config-Version: 3.7.0-4
Replaces: php-imagick (<< 3.7.0-4~)
Provides: php-imagick
Depends: php8.2-common, phpapi-20220829, libc6 (>= 2.33), libgomp1 (>= 9), libmagickcore-6.q16-6 (>= 8:6.9.10.2), libmagickwand-6.q16-6 (>= 8:6.9.10.2)
Pre-Depends: php-common (>= 2:69~)
Recommends: fonts-dejavu-core, ghostscript
Breaks: php-imagick (<< 3.7.0-4~)
Conffiles:
 /etc/php/8.2/mods-available/imagick.ini 5dc8a9511b4fa405099723d80b21b5de
Description: Provides a wrapper to the ImageMagick library
 Imagick is a native php extension to create and modify images using the
 ImageMagick API.
Homepage: http://pecl.php.net/package/imagick

Package: php8.2-intl
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 596
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.34-1~deb12u1
Config-Version: 8.2.34-1~deb12u1
Provides: php-intl
Depends: php-common (>= 1:81~), ucf, php8.2-common (= 8.2.34-1~deb12u1), libc6 (>= 2.14), libgcc-s1 (>= 3.0), libicu72 (>= 72.1~rc-1~), libstdc++6 (>= 4.3)
Description: Internationalisation module for PHP
 This package provides the Internationalisation module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.2-ldap
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 128
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.34-1~deb12u1
Config-Version: 8.2.34-1~deb12u1
Provides: php-ldap
Depends: php-common (>= 1:81~), ucf, php8.2-common (= 8.2.34-1~deb12u1), libc6 (>= 2.14), libldap-2.5-0 (>= 2.5.4)
Description: LDAP module for PHP
 This package provides the LDAP module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.2-mbstring
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 1194
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.34-1~deb12u1
Config-Version: 8.2.34-1~deb12u1
Provides: php-mbstring
Depends: php-common (>= 1:81~), ucf, php8.2-common (= 8.2.34-1~deb12u1), libc6 (>= 2.14), libonig5 (>= 6.8.1)
Description: MBSTRING module for PHP
 This package provides the MBSTRING module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.2-mysql
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 455
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.34-1~deb12u1
Config-Version: 8.2.34-1~deb12u1
Provides: php-mysqli, php-mysqlnd, php-pdo-mysql, php8.2-mysqli, php8.2-mysqlnd, php8.2-pdo-mysql
Depends: php-common (>= 1:81~), ucf, php8.2-common (= 8.2.34-1~deb12u1), libc6 (>= 2.15)
Description: MySQL module for PHP
 This package provides the MySQL module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.2-opcache
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 1028
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.34-1~deb12u1
Config-Version: 8.2.34-1~deb12u1
Provides: php-opcache
Depends: php-common (>= 1:81~), ucf, php8.2-common (= 8.2.34-1~deb12u1), libc6 (>= 2.34), libgcc-s1 (>= 3.3)
Description: Zend OpCache module for PHP
 This package provides the Zend OpCache module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.2-readline
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 64
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.34-1~deb12u1
Config-Version: 8.2.34-1~deb12u1
Provides: php-readline
Depends: php-common (>= 1:81~), ucf, php8.2-common (= 8.2.34-1~deb12u1), libc6 (>= 2.34), libedit2 (>= 3.1-20160903-0)
Description: readline module for PHP
 This package provides the readline module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.2-redis
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 672
Maintainer: Debian PHP PECL Maintainers <team+php-pecl@tracker.debian.org>
Architecture: amd64
Source: php-redis
Version: 5.3.7+4.3.0-3
Config-Version: 5.3.7+4.3.0-3
Replaces: php-redis (<< 5.3.7+4.3.0-3~)
Provides: php-redis
Depends: php8.2-common, php8.2-igbinary, phpapi-20220829, libc6 (>= 2.14), liblz4-1 (>= 0.0~r130), libzstd1 (>= 1.5.2)
Pre-Depends: php-common (>= 2:69~)
Suggests: redis-server
Breaks: php-redis (<< 5.3.7+4.3.0-3~)
Conffiles:
 /etc/php/8.2/mods-available/redis.ini e9ee56ccb1ac17cef91a51375dc24947
Description: PHP extension for interfacing with Redis
 This extension allows php applications to communicate with the Redis
 persistent key-value store.  The php-redis module provides an easy
 object oriented interface.
Homepage: https://pecl.php.net/package/redis

Package: php8.2-xml
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 469
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.34-1~deb12u1
Config-Version: 8.2.34-1~deb12u1
Replaces: php8.2-xsl (<< 7.0.3-6~)
Provides: php-dom, php-simplexml, php-xml, php-xmlreader, php-xmlwriter, php-xsl, php8.2-dom, php8.2-simplexml, php8.2-xmlreader, php8.2-xmlwriter, php8.2-xsl
Depends: php-common (>= 1:81~), ucf, php8.2-common (= 8.2.34-1~deb12u1), libc6 (>= 2.33), libxml2 (>= 2.9.0), libxslt1.1 (>= 1.1.25)
Breaks: php8.2-xsl (<< 7.0.3-6~)
Description: DOM, SimpleXML, XML, and XSL module for PHP
 This package provides the DOM, SimpleXML, XML, and XSL module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.2-zip
Status: deinstall ok config-files
Priority: optional
Section: php
Installed-Size: 120
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.34-1~deb12u1
Config-Version: 8.2.34-1~deb12u1
Provides: php-zip
Depends: php-common (>= 1:81~), ucf, php8.2-common (= 8.2.34-1~deb12u1), libc6 (>= 2.33), libzip4 (>= 1.7.0)
Description: Zip module for PHP
 This package provides the Zip module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.4
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 88
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Version: 8.4.26-1~deb13u1
Provides: php
Depends: libapache2-mod-php8.4 | php8.4-fpm | php8.4-cgi, php8.4-common
Description: server-side, HTML-embedded scripting language (metapackage)
 This package is a metapackage that, when installed, guarantees that you
 have at least one of the four server-side versions of the PHP interpreter
 installed. Removing this package won't remove PHP from your system, however
 it may remove other packages that depend on this one.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.4-apcu
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 174
Maintainer: Debian PHP PECL Maintainers <team+php-pecl@tracker.debian.org>
Architecture: amd64
Source: php-apcu
Version: 5.1.24-1
Replaces: php-apcu (<< 5.1.24-1~)
Provides: php-apcu
Depends: php8.4-common, phpapi-20240924, libc6 (>= 2.38)
Pre-Depends: php-common (>= 2:69~)
Suggests: php-gd
Breaks: php-apcu (<< 5.1.24-1~)
Conflicts: php-xcache, php-yac
Conffiles:
 /etc/php/8.4/mods-available/apcu.ini 63cdaa57c6c9a68ce51c0862bc1b74a0
Description: APC User Cache for PHP
 The APCu is userland caching: APC (Alternative PHP Cache) stripped of
 opcode caching after the deployment of Zend OpCache in PHP 5.5 as the
 primary solution to opcode caching in future versions of PHP.
 .
 The APCu is a fast solution for userland caching (and dumping) of PHP
 variables locally, it is not distributed like MemcacheD, but they can
 be used together for optimal caching.
Homepage: https://pecl.php.net/package/APCu

Package: php8.4-bcmath
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 104
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.4
Version: 8.4.26-1~deb13u1
Provides: php-bcmath
Depends: php-common (>= 2:95~), ucf, php8.4-common (= 8.4.26-1~deb13u1), libc6 (>= 2.14)
Description: Bcmath module for PHP
 This package provides the Bcmath module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.4-cli
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 6012
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.4
Version: 8.4.26-1~deb13u1
Provides: php-cli, php-json, php8.4-json, phpapi-20240924
Depends: libedit2 (>= 2.11-20080614-4), media-types | mime-support, php8.4-common (= 8.4.26-1~deb13u1), php8.4-opcache, php8.4-readline, tzdata, ucf, libargon2-1 (>= 0~20171227), libc6 (>= 2.38), libpcre2-8-0 (>= 10.32), libsodium23 (>= 1.0.18), libssl3t64 (>= 3.0.0), libxml2 (>= 2.9.4), zlib1g (>= 1:1.1.4)
Suggests: php-pear
Description: command-line interpreter for the PHP scripting language
 This package provides the /usr/bin/php8.4 command interpreter, useful for
 testing PHP scripts from a shell or performing general shell scripting tasks.
 .
 The following extensions are built in: Core date filter hash json libxml
 openssl pcntl pcre random Reflection session sodium SPL standard zlib.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.4-common
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 9978
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.4
Version: 8.4.26-1~deb13u1
Provides: php-calendar, php-ctype, php-exif, php-ffi, php-fileinfo, php-ftp, php-iconv, php-pdo, php-phar, php-posix, php-shmop, php-sockets, php-sysvmsg, php-sysvsem, php-sysvshm, php-tokenizer, php8.4-calendar, php8.4-ctype, php8.4-exif, php8.4-ffi, php8.4-fileinfo, php8.4-ftp, php8.4-gettext, php8.4-iconv, php8.4-pdo, php8.4-phar, php8.4-posix, php8.4-shmop, php8.4-sockets, php8.4-sysvmsg, php8.4-sysvsem, php8.4-sysvshm, php8.4-tokenizer
Depends: php-common (>= 2:95~), ucf, libc6 (>= 2.38), libffi8 (>= 3.4), libssl3t64 (>= 3.0.0)
Breaks: gforge-common (<< 6), php7.0-curl (<< 7.0.33-1~), php7.2-sodium (<< 7.2.12~)
Description: documentation, examples and common module for PHP
 This package provides the documentation, examples and common module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.4-curl
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 160
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.4
Version: 8.4.26-1~deb13u1
Provides: php-curl
Depends: php-common (>= 2:95~), ucf, php8.4-common (= 8.4.26-1~deb13u1), libc6 (>= 2.14), libcurl4t64 (>= 7.63.0)
Breaks: php7.0-curl (<< 7.0.33-1~)
Description: CURL module for PHP
 This package provides the CURL module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.4-gd
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 176
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.4
Version: 8.4.26-1~deb13u1
Provides: php-gd
Depends: php-common (>= 2:95~), ucf, php8.4-common (= 8.4.26-1~deb13u1), libc6 (>= 2.4), libgd3 (>= 2.3.3)
Description: GD module for PHP
 This package provides the GD module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.4-gmp
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 104
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.4
Version: 8.4.26-1~deb13u1
Provides: php-gmp
Depends: php-common (>= 2:95~), ucf, php8.4-common (= 8.4.26-1~deb13u1), libc6 (>= 2.4), libgmp10 (>= 2:6.3.0+dfsg)
Description: GMP module for PHP
 This package provides the GMP module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.4-igbinary
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 121
Maintainer: Debian PHP PECL Maintainers <team+php-pecl@tracker.debian.org>
Architecture: amd64
Source: php-igbinary
Version: 3.2.16-4
Replaces: php-igbinary (<< 3.2.16-4~)
Provides: php-igbinary
Depends: php8.4-common, phpapi-20240924, libc6 (>= 2.14)
Pre-Depends: php-common (>= 2:69~)
Breaks: php-igbinary (<< 3.2.16-4~)
Conffiles:
 /etc/php/8.4/mods-available/igbinary.ini 14c4abd8fcffef929339f328f10f6e80
Description: igbinary PHP serializer
 Igbinary is a drop in replacement for the standard PHP serializer.
 Instead of time and space consuming textual representation, igbinary
 stores PHP data structures in a compact binary form.  Savings are
 significant when using memcached or similar memory based storages for
 serialized data.
Homepage: http://pecl.php.net/package/igbinary

Package: php8.4-imagick
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 525
Maintainer: Debian PHP PECL Maintainers <team+php-pecl@tracker.debian.org>
Architecture: amd64
Source: php-imagick
Version: 3.8.0-2
Replaces: php-imagick (<< 3.8.0~)
Provides: php-imagick
Depends: php8.4-common, phpapi-20240924, libc6 (>= 2.38), libgomp1 (>= 9), libmagickcore-7.q16-10 (>= 8:7.1.1.21), libmagickwand-7.q16-10 (>= 8:7.1.1.21)
Pre-Depends: php-common (>= 2:69~)
Recommends: fonts-dejavu-core, ghostscript
Breaks: php-imagick (<< 3.8.0~)
Conffiles:
 /etc/php/8.4/mods-available/imagick.ini 5dc8a9511b4fa405099723d80b21b5de
Description: Provides a wrapper to the ImageMagick library
 Imagick is a native php extension to create and modify images using the
 ImageMagick API.
Homepage: http://pecl.php.net/package/imagick

Package: php8.4-intl
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 680
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.4
Version: 8.4.26-1~deb13u1
Provides: php-intl
Depends: php-common (>= 2:95~), ucf, php8.4-common (= 8.4.26-1~deb13u1), libc6 (>= 2.14), libgcc-s1 (>= 3.0), libicu76 (>= 76.1-1~), libstdc++6 (>= 5)
Description: Internationalisation module for PHP
 This package provides the Internationalisation module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.4-ldap
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 132
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.4
Version: 8.4.26-1~deb13u1
Provides: php-ldap
Depends: php-common (>= 2:95~), ucf, php8.4-common (= 8.4.26-1~deb13u1), libc6 (>= 2.14), libldap2 (>= 2.6.2)
Description: LDAP module for PHP
 This package provides the LDAP module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.4-mbstring
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 1234
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.4
Version: 8.4.26-1~deb13u1
Provides: php-mbstring
Depends: php-common (>= 2:95~), ucf, php8.4-common (= 8.4.26-1~deb13u1), libc6 (>= 2.38), libonig5 (>= 6.8.1)
Description: MBSTRING module for PHP
 This package provides the MBSTRING module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.4-mysql
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 455
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.4
Version: 8.4.26-1~deb13u1
Provides: php-mysqli, php-mysqlnd, php-pdo-mysql, php8.4-mysqli, php8.4-mysqlnd, php8.4-pdo-mysql
Depends: php-common (>= 2:95~), ucf, php8.4-common (= 8.4.26-1~deb13u1), libc6 (>= 2.38), libssl3t64 (>= 3.0.0), zlib1g (>= 1:1.1.4)
Description: MySQL module for PHP
 This package provides the MySQL module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.4-opcache
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 1258
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.4
Version: 8.4.26-1~deb13u1
Provides: php-opcache
Depends: php-common (>= 2:95~), ucf, php8.4-common (= 8.4.26-1~deb13u1), libc6 (>= 2.38), libgcc-s1 (>= 3.3)
Description: Zend OpCache module for PHP
 This package provides the Zend OpCache module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.4-phpdbg
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 6040
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.4
Version: 8.4.26-1~deb13u1
Provides: php-json, php-phpdbg, php8.4-json, phpapi-20240924
Depends: media-types | mime-support, php8.4-cli, php8.4-common (= 8.4.26-1~deb13u1), php8.4-opcache, tzdata, ucf, libargon2-1 (>= 0~20171227), libc6 (>= 2.38), libpcre2-8-0 (>= 10.32), libsodium23 (>= 1.0.18), libssl3t64 (>= 3.0.0), libxml2 (>= 2.9.4), zlib1g (>= 1:1.1.4)
Recommends: php-readline
Description: server-side, HTML-embedded scripting language (PHPDBG binary)
 This package provides the /usr/bin/phpdbg command interpreter, useful for
 stepthrough debugging of PHP code.
 .
 The following extensions are built in: Core date filter hash json libxml
 openssl pcntl pcre random Reflection session sodium SPL standard zlib.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.4-readline
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 64
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.4
Version: 8.4.26-1~deb13u1
Provides: php-readline
Depends: php-common (>= 2:95~), ucf, php8.4-common (= 8.4.26-1~deb13u1), libc6 (>= 2.34), libedit2 (>= 3.1-20230828-1)
Description: readline module for PHP
 This package provides the readline module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.4-redis
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 833
Maintainer: Debian PHP PECL Maintainers <team+php-pecl@tracker.debian.org>
Architecture: amd64
Source: php-redis
Version: 6.2.0-1
Replaces: php-redis (<< 6.2.0~)
Provides: php-redis
Depends: php8.4-common, php8.4-igbinary, phpapi-20240924, libc6 (>= 2.38), liblz4-1 (>= 0.0~r130), libzstd1 (>= 1.5.5)
Pre-Depends: php-common (>= 2:69~)
Suggests: redis-server
Breaks: php-redis (<< 6.2.0~)
Conffiles:
 /etc/php/8.4/mods-available/redis.ini b89730768a6d15f2c55d71c13137d763
Description: PHP extension for interfacing with Redis
 This extension allows php applications to communicate with the Redis
 persistent key-value store.  The php-redis module provides an easy
 object oriented interface.
Homepage: https://pecl.php.net/package/redis

Package: php8.4-xml
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 2572
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.4
Version: 8.4.26-1~deb13u1
Replaces: php8.4-xsl (<< 7.0.3-6~)
Provides: php-dom, php-simplexml, php-xml, php-xmlreader, php-xmlwriter, php-xsl, php8.4-dom, php8.4-simplexml, php8.4-xmlreader, php8.4-xmlwriter, php8.4-xsl
Depends: php-common (>= 2:95~), ucf, php8.4-common (= 8.4.26-1~deb13u1), libc6 (>= 2.33), libxml2 (>= 2.9.4), libxslt1.1 (>= 1.1.27)
Breaks: php8.4-xsl (<< 7.0.3-6~)
Description: DOM, SimpleXML, XML, and XSL module for PHP
 This package provides the DOM, SimpleXML, XML, and XSL module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.4-zip
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 140
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.4
Version: 8.4.26-1~deb13u1
Provides: php-zip
Depends: php-common (>= 2:95~), ucf, php8.4-common (= 8.4.26-1~deb13u1), libc6 (>= 2.33), libzip5 (>= 1.11.1)
Description: Zip module for PHP
 This package provides the Zip module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: pigz
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 153
Maintainer: Eduard Bloch <blade@debian.org>
Architecture: amd64
Version: 2.8-1
Depends: libc6 (>= 2.34), zlib1g (>= 1:1.2.6)
Pre-Depends: dpkg (>= 1.15.6)
Description: Parallel Implementation of GZip
 pigz, which stands for Parallel Implementation of GZip, is a fully functional
 replacement for gzip that takes advantage of multiple processors and multiple
 cores when compressing data.
Homepage: http://zlib.net/pigz/

Package: pinentry-curses
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 150
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: pinentry
Version: 1.3.1-2
Provides: pinentry
Depends: libassuan9 (>= 2.0.1), libc6 (>= 2.38), libgpg-error0 (>= 1.14), libncursesw6 (>= 6), libtinfo6 (>= 6)
Suggests: pinentry-doc
Enhances: gnupg-agent
Description: curses-based PIN or pass-phrase entry dialog for GnuPG
 This package contains a program that allows for secure entry of PINs or
 pass phrases.  That means it tries to take care that the entered
 information is not swapped to disk or temporarily stored anywhere.
 This functionality is particularly useful for entering pass phrases
 when using encryption software such as GnuPG or e-mail clients using
 the same.  It uses an open protocol and is therefore not tied to
 particular software.
 .
 The program contained in this package implements a PIN entry dialog
 using the curses tool kit, meaning that it is useful for users
 working in text mode without the X Window System.  There are sibling
 packages that implement PIN entry dialogs that use an X tool kit.  If
 you install any of the graphical packages then this package is not
 necessary because the sibling packages automatically fall back to
 text mode if X is not active.
Homepage: https://www.gnupg.org/related_software/pinentry/

Package: pkg-config
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 29
Maintainer: Andrej Shadura <andrewsh@debian.org>
Architecture: amd64
Multi-Arch: same
Source: pkgconf
Version: 1.8.1-4
Depends: pkgconf (>= 1.8.1-4)
Conffiles:
 /etc/dpkg/dpkg.cfg.d/pkg-config-hook-config newconffile remove-on-upgrade
Description: manage compile and link flags for libraries (transitional package)
 pkgconf is an implementation of the pkg-config system, which helps to configure
 compiler and linker flags for development frameworks.
 .
 pkgconf is a replacement for pkg-config, providing additional functionality
 while also maintaining compatibility.
 .
 This package only provides a dependency link to the pkgconf package to help
 with package upgrades. It can be safely removed.
Homepage: http://pkgconf.org/

Package: pkgconf
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 65
Maintainer: Andrej Shadura <andrewsh@debian.org>
Architecture: amd64
Multi-Arch: same
Version: 1.8.1-4
Replaces: pkg-config (<< 1.8)
Provides: pkg-config (= 1.8.1-4)
Depends: pkgconf-bin (>= 1.8.1-4)
Breaks: pkg-config (<< 1.8)
Conffiles:
 /etc/dpkg/dpkg.cfg.d/pkgconf-hook-config newconffile remove-on-upgrade
Description: manage compile and link flags for libraries
 pkgconf is an implementation of the pkg-config system, which helps to configure
 compiler and linker flags for development frameworks.
 .
 pkgconf is a replacement for pkg-config, providing additional functionality
 while also maintaining compatibility.
Homepage: http://pkgconf.org/

Package: pkgconf-bin
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 83
Maintainer: Andrej Shadura <andrewsh@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: pkgconf
Version: 1.8.1-4
Replaces: pkg-config (<< 1.8), pkgconf (<< 1.8.0-2~)
Depends: libc6 (>= 2.34), libpkgconf3 (>= 1.8.0)
Breaks: pkgconf (<< 1.8.0-2~)
Description: manage compile and link flags for libraries (binaries)
 pkgconf is an implementation of the pkg-config system, which helps to configure
 compiler and linker flags for development frameworks.
 .
 pkgconf is a replacement for pkg-config, providing additional functionality
 while also maintaining compatibility.
 .
 This package contains the pkgconf binary and related files.
Homepage: http://pkgconf.org/

Package: pocketsphinx-en-us
Status: install ok installed
Priority: optional
Section: sound
Installed-Size: 36991
Maintainer: Debian Accessibility Team <pkg-a11y-devel@alioth-lists.debian.net>
Architecture: all
Multi-Arch: foreign
Source: pocketsphinx
Version: 0.8+5prealpha+1-15
Description: Speech recognition tool - US English language model
 CMU Sphinx is a large vocabulary, speaker-independent continuous speech
 recognition engine.
 .
 This package contains the default US English language model for
 PocketSphinx.
Homepage: http://cmusphinx.sourceforge.net/

Package: polkitd
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 513
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: policykit-1
Version: 126-2
Replaces: policykit-1 (<< 0.120-4~), polkitd-javascript (<< 121+compat0.1-3~)
Depends: adduser | systemd-sysusers, default-dbus-system-bus | dbus-system-bus, default-logind | logind, xml-core (>= 0.14), libc6 (>= 2.38), libduktape207 (>= 2.0.3), libexpat1 (>= 2.0.1), libglib2.0-0t64 (>= 2.80.0), libpam0g (>= 0.99.7.1), libpolkit-agent-1-0 (= 126-2), libpolkit-gobject-1-0 (= 126-2), libsystemd0 (>= 253)
Breaks: policykit-1 (<< 0.120-4~), polkitd-javascript (<< 121+compat0.1-3~)
Description: framework for managing administrative policies and privileges
 polkit is an application-level toolkit for defining and handling the policy
 that allows unprivileged processes to speak to privileged processes.
 It was previously named PolicyKit.
 .
 It is a framework for centralizing the decision making process with respect to
 granting access to privileged operations for unprivileged (desktop)
 applications.
 .
 In a typical use of polkit, an unprivileged application such as gnome-disks
 sends requests via D-Bus or other inter-process communication mechanisms
 to a privileged system service such as udisks, which asks polkitd for
 permission to process those requests. This allows the application to carry
 out privileged tasks without making use of setuid, which avoids several
 common sources of security vulnerabilities.
 .
 This package provides the polkitd D-Bus service and supporting programs.
 The pkexec program is not included, and can be found in the pkexec package.
Homepage: https://github.com/polkit-org/polkit/

Package: poppler-data
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 13086
Maintainer: Hideki Yamane <henrich@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.4.12-1
Pre-Depends: dpkg (>= 1.15.6~)
Suggests: poppler-utils, ghostscript, fonts-japanese-mincho | fonts-ipafont-mincho, fonts-japanese-gothic | fonts-ipafont-gothic, fonts-arphic-ukai, fonts-arphic-uming, fonts-nanum (>= 20131007~)
Enhances: ghostscript
Conffiles:
 /etc/ghostscript/cidfmap.d/90gs-cjk-resource-cns1.conf d3a491137506a332ab747c571e5bee33
 /etc/ghostscript/cidfmap.d/90gs-cjk-resource-gb1.conf 5ec7d7edc178ef73b1f6ac21a3cdc8a0
 /etc/ghostscript/cidfmap.d/90gs-cjk-resource-japan1.conf 9502944d3a420a2763a36517679460f4
 /etc/ghostscript/cidfmap.d/90gs-cjk-resource-japan2.conf 00d6b53125e159d61e2fd0a5056b4b4c
 /etc/ghostscript/cidfmap.d/90gs-cjk-resource-korea1.conf 76ba5a8a08376075902594b9ecd902ed
Description: encoding data for the poppler PDF rendering library
 This package provides the CMap tables required to display PDF documents
 containing CJK characters with libpoppler. They were previously provided
 by the packages cmap-adobe-{cns1,gb1,japan1,japan2,korea1} and
 gs-cjk-resource.
 .
 Users who want to view or create PDF files in Chinese, Japanese, or
 Korean without embedded fonts will need this package.
Homepage: https://poppler.freedesktop.org/

Package: procps
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 2395
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2:4.0.4-9
Replaces: manpages-de (<< 4.9.1-2), manpages-fr (<< 4.9.1-2), manpages-fr-extra (<< 20151231+nmu1), manpages-pl (<< 1:4.9.1-2)
Provides: watch
Depends: libc6 (>= 2.38), libncursesw6 (>= 6), libproc2-0 (>= 2:4.0.4), libsystemd0 (>= 254), libtinfo6 (>= 6), init-system-helpers (>= 1.29~)
Recommends: psmisc, linux-sysctl-defaults
Breaks: manpages-de (<< 4.9.1-2), manpages-fr (<< 4.9.1-2), manpages-fr-extra (<< 20151231+nmu1), manpages-pl (<< 1:4.9.1-2)
Conffiles:
 /etc/sysctl.conf c0c09cba30da0565737cace8000d64ee remove-on-upgrade
 /etc/init.d/procps f9903aa0d9f2f10714269befb4cdba8f
 /etc/sysctl.d/README.sysctl 93eda3f215e9d29316f5597cb4551082
Description: /proc file system utilities
 This package provides command line and full screen utilities for browsing
 procfs, a "pseudo" file system dynamically generated by the kernel to
 provide information about the status of entries in its process table
 (such as whether the process is running, stopped, or a "zombie").
 .
 It contains free, kill, pkill, pgrep, pmap, ps, pwdx, skill, slabtop,
 snice, sysctl, tload, top, uptime, vmstat, w, and watch.
Homepage: https://gitlab.com/procps-ng/procps

Package: progress
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 86
Maintainer: Stephen Kitt <skitt@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 0.17-1
Depends: libc6 (>= 2.34), libncursesw6 (>= 6), libtinfo6 (>= 6)
Description: Coreutils Progress Viewer (formerly known as 'cv')
 This tool can be described as a Tiny, Dirty, Linux-and-OSX-Only
 C command that looks for coreutils basic commands (cp, mv, dd, tar,
 gzip/gunzip, cat, etc.) currently running on your system and
 displays the percentage of copied data. It can also show estimated
 time and throughput, and provide a "top-like" mode (monitoring).
 .
 It simply scans `/proc` for interesting commands, and then looks at
 directories `fd` and `fdinfo` to find opened files and seek positions,
 and reports status for the largest file.
 .
 It's very light, and compatible with virtually any command.
 This program was formerly known as 'cv' on github.
Homepage: https://github.com/Xfennec/progress

Package: psmisc
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 950
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 23.7-2
Replaces: manpages-de (<< 4.9.1-1)
Depends: libc6 (>= 2.38), libtinfo6 (>= 6)
Breaks: manpages-de (<< 4.9.1-1)
Description: utilities that use the proc file system
 This package contains miscellaneous utilities that use the proc FS:
 .
  - fuser: identifies processes that are using files or sockets.
  - killall: kills processes by name (e.g. "killall -HUP named").
  - peekfd: shows the data traveling over a file descriptor.
  - pstree: shows currently running processes as a tree.
  - prtstat: print the contents of /proc/<pid>/stat
Homepage: http://psmisc.sf.net/

Package: publicsuffix
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 570
Maintainer: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Architecture: all
Multi-Arch: foreign
Version: 20250328.1952-0.1
Provides: publicsuffix-dafsa
Description: accurate, machine-readable list of domain name suffixes
 A machine-readable list of domain name suffixes that accept public
 registration.  Each suffix represents the part of a domain name which
 is not under the control of the individual registrant, which makes
 the list useful for grouping cookies, deciding same-origin policies,
 collating spam, and other activities.
Homepage: https://publicsuffix.org

Package: pv
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 267
Maintainer: Antoine Beaupré <anarcat@debian.org>
Architecture: amd64
Version: 1.9.31-1
Depends: libc6 (>= 2.38)
Suggests: doc-base
Description: Shell pipeline element to meter data passing through
 pv (Pipe Viewer) can be inserted into any normal pipeline between two
 processes to give a visual indication of how quickly data is passing through,
 how long it has taken, how near to completion it is, and an estimate of how
 long it will be until completion.
 .
 To use it, insert it in a pipeline between two processes, with the
 appropriate options. Its standard input will be passed through to its
 standard output and progress will be shown on standard error.
Homepage: https://www.ivarch.com/programs/pv.shtml

Package: python-apt-common
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 532
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: python-apt
Version: 3.0.0
Replaces: python-apt (<< 0.7.98+nmu1)
Breaks: python-apt (<< 0.7.98+nmu1)
Enhances: python-apt, python3-apt
Description: Python interface to libapt-pkg (locales)
 The apt_pkg Python interface will provide full access to the internal
 libapt-pkg structures allowing Python programs to easily perform a
 variety of functions.
 .
 This package contains locales.

Package: python3
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 83
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: python3-defaults
Version: 3.13.5-1
Replaces: python3-minimal (<< 3.1.2-2)
Provides: python3-profiler, python3-supported-max (= 3.13), python3-supported-min (= 3.13)
Depends: python3.13 (>= 3.13.5-1~), libpython3-stdlib (= 3.13.5-1)
Pre-Depends: python3-minimal (= 3.13.5-1)
Suggests: python3-doc (>= 3.13.5-1), python3-tk (>= 3.13.5-1~), python3-venv (>= 3.13.5-1)
Conflicts: python3-distutils
Description: interactive high-level object-oriented language (default python3 version)
 Python, the high-level, interactive object oriented language,
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
 .
 This package is a dependency package, which depends on Debian's default
 Python 3 version (currently v3.13).
Homepage: https://www.python.org/

Package: python3-acme
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 258
Maintainer: Debian Let's Encrypt <team+letsencrypt@tracker.debian.org>
Architecture: all
Source: python-acme
Version: 4.0.0-1
Provides: python3-acme-abi-4 (= 4.0)
Depends: ca-certificates, python3-openssl (>= 25.0.0~), python3-cryptography (>= 43.0.0), python3-josepy (>= 2.0.0~), python3-pytz, python3-requests, python3-rfc3339, python3:any
Suggests: python-acme-doc
Description: ACME protocol library for Python 3
 This is a library used by the Let's Encrypt client for the ACME
 (Automated Certificate Management Environment).  The ACME protocol is
 designed as part of the Let's Encrypt project, to make it possible to
 setup an HTTPS server and have it automatically obtain a
 browser-trusted certificate, without any human intervention.  This
 library implements the protocol used for proving the control of a
 domain.  This library is Python 3.
Homepage: https://letsencrypt.org/

Package: python3-apt
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 698
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: python-apt
Version: 3.0.0
Replaces: python-apt (<< 0.7.98+nmu1)
Depends: python3 (<< 3.14), python3 (>= 3.13~), python3:any, libapt-pkg7.0 (>= 2.9.27+exp1), libc6 (>= 2.33), libgcc-s1 (>= 3.0), libstdc++6 (>= 13.1), python-apt-common, distro-info-data
Recommends: lsb-release, iso-codes
Suggests: python-apt-doc, apt
Breaks: apt-xapian-index (<< 0.51~), kthresher (<= 1.4.0-1), python-apt (<< 0.7.98+nmu1)
Description: Python 3 interface to libapt-pkg
 The apt_pkg Python 3 interface will provide full access to the internal
 libapt-pkg structures allowing Python 3 programs to easily perform a
 variety of functions, such as:
 .
  - Access to the APT configuration system
  - Access to the APT package information database
  - Parsing of Debian package control files, and other files with a
    similar structure
 .
 The included 'aptsources' Python interface provides an abstraction of
 the sources.list configuration on the repository and the distro level.

Package: python3-arrow
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 313
Maintainer: Federico Ceratto <federico@debian.org>
Architecture: all
Source: python-arrow
Version: 1.3.0-1.1
Depends: python3-dateutil, python3-typeshed, python3:any
Suggests: python-arrow-doc
Description: Python3 library to manipulate dates, times, and timestamps
 A Python3 library that offers a sensible, human-friendly approach to creating,
 manipulating, formatting and converting dates, times, and timestamps.
 It implements and updates the datetime type, plugging gaps in functionality,
 and provides a module API that supports many common creation scenarios.
 Arrow replaces a number of modules: datetime, time, calendar, dateutil, pytz.
Homepage: https://arrow.readthedocs.io/

Package: python3-attr
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 268
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Source: python-attrs
Version: 25.3.0-1
Depends: python3:any
Suggests: python-attr-doc
Description: Attributes without boilerplate (Python 3)
 attrs is an MIT-licensed Python package with class decorators that ease the
 chores of implementing the most common attribute-related object protocols.
 .
 You just specify the attributes to work with and attrs gives you:
   - a nice human-readable __repr__,
   - a complete set of comparison methods,
   - an initializer,
   - and much more
 without writing dull boilerplate code again and again.
 .
 This package contains attrs packaged for Python 3.
Homepage: https://attrs.readthedocs.org/

Package: python3-augeas
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 107
Maintainer: Free Ekanayaka <freee@debian.org>
Architecture: amd64
Source: python-augeas
Version: 1.2.0-1
Depends: libaugeas0 (>= 1.13.0), libc6 (>= 2.4), python3 (>= 3~), python3-cffi-backend-api-min (<= 9729), python3-cffi-backend-api-max (>= 9729), python3:any
Description: Python3 bindings for Augeas
 Augeas is a library and command line tool that focuses
 on the most basic problem in handling Linux configurations
 programmatically: editing actual configuration files in a
 controlled manner.
 .
 This module provides a Python3 interface to the Augeas API.
Homepage: http://augeas.net/

Package: python3-autocommand
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 61
Maintainer: Jeroen Ploemen <jcfp@debian.org>
Architecture: all
Source: python-autocommand
Version: 2.2.2-3
Depends: python3:any
Description: library to generate argparse parsers from function signatures
 Autocommand is a library to automatically generate and run simple argparse
 parsers from function signatures.
 .
 It turns a function into a command-line program, converting the function's
 parameter signature into command-line arguments, and automatically running
 the function with these arguments if the module was called as __main__.
 Usage messages, invoked with -h or --help, are also created automatically.
Homepage: https://github.com/Lucretiel/autocommand

Package: python3-bcrypt
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 555
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: amd64
Source: python-bcrypt (4.2.0-2.1)
Version: 4.2.0-2.1+b1
Depends: python3 (<< 3.14), python3 (>= 3.13~), python3:any, libc6 (>= 2.34), libgcc-s1 (>= 4.2)
Description: password hashing library for Python 3
 bcrypt is a Python module which provides a password hashing method based on
 the Blowfish password hashing algorithm, as described in
 "A Future-Adaptable Password Scheme" by Niels Provos and David Mazieres:
 http://static.usenix.org/events/usenix99/provos.html.
 .
 This package provides the bcrypt Python module for Python 3.x.
Static-Built-Using: rust-base64 (= 0.22.1-1), rust-bcrypt (= 0.15.1-3), rust-bcrypt-pbkdf (= 0.10.0-1), rust-getrandom (= 0.2.15-1), rust-subtle (= 2.6.1-1)
Homepage: https://github.com/pyca/bcrypt

Package: python3-blinker
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 45
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Source: blinker
Version: 1.9.0-1
Depends: python3:any
Suggests: python-blinker-doc
Description: Fast, simple object-to-object and broadcast signaling (Python3)
 Blinker provides fast & simple object-to-object and broadcast signaling
 for Python objects. Interested signal receivers can subscribe to specific
 senders or receive signals sent by any sender.
 .
 The core of Blinker is quite small but provides powerful features:
  * a global registry of named signals
  * anonymous signals
  * custom name registries
  * permanently or temporarily connected receivers
  * automatically disconnected receivers via weak referencing
  * sending arbitrary data payloads
  * collecting return values from signal receivers
  * thread safety
 .
 This package contains the Python 3 version.
Homepage: https://github.com/pallets-eco/blinker

Package: python3-cap-ng
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 80
Maintainer: Håvard F. Aasen <havard.f.aasen@pfft.no>
Architecture: amd64
Source: libcap-ng (0.8.5-4)
Version: 0.8.5-4+b1
Depends: python3 (<< 3.14), python3 (>= 3.13~), python3:any, libc6 (>= 2.14), libcap-ng0 (>= 0.8.3)
Description: Python3 bindings for libcap-ng
 This library implements the user-space interfaces to the POSIX
 1003.1e capabilities available in Linux kernels.  These capabilities are
 a partitioning of the all powerful root privilege into a set of distinct
 privileges.
 .
 The libcap-ng library is intended to make programming with POSIX
 capabilities much easier than the traditional libcap library.
 .
 This package contains the Python3 bindings for libcap-ng.
Homepage: https://people.redhat.com/sgrubb/libcap-ng

Package: python3-certbot
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1603
Maintainer: Debian Let's Encrypt <team+letsencrypt@tracker.debian.org>
Architecture: all
Source: python-certbot
Version: 4.0.0-2+deb13u1
Replaces: python-letsencrypt
Provides: python3-certbot-abi-4 (= 4.0)
Depends: python3-acme-abi-4 (>= 4.0), python3-requests, python3-acme, python3-configargparse (>= 1.7~), python3-configobj, python3-cryptography (>= 43.0.0), python3-distro, python3-importlib-metadata | python3-supported-min (>= 3.10), python3-josepy (>= 2.0~), python3-parsedatetime, python3-pytz, python3-rfc3339, python3:any
Recommends: certbot
Suggests: python-certbot-doc
Breaks: python-letsencrypt (<= 0.6.0)
Description: main library for certbot
 The objective of Certbot, Let's Enc
 rypt, and the ACME (Automated
 Certificate Management Environment) protocol is to make it possible
 to set up an HTTPS server and have it automatically obtain a
 browser-trusted certificate, without any human intervention. This is
 accomplished by running a certificate management agent on the web
 server.
 .
 This agent is used to:
 .
   - Automatically prove to the Let's Encrypt CA that you control the website
   - Obtain a browser-trusted certificate and set it up on your web server
   - Keep track of when your certificate is going to expire, and renew it
   - Help you revoke the certificate if that ever becomes necessary.
 .
 This package contains the main libraries.
Homepage: https://certbot.eff.org/

Package: python3-certbot-apache
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 882
Maintainer: Debian Let's Encrypt <team+letsencrypt@tracker.debian.org>
Architecture: all
Source: python-certbot-apache
Version: 4.0.0-2
Replaces: python-letsencrypt-apache
Depends: apache2, certbot, python3-certbot-abi-4 (>= 4.0), python3-acme, python3-augeas, python3-certbot, python3:any
Suggests: python-certbot-apache-doc
Breaks: python-letsencrypt-apache
Description: Apache plugin for Certbot
 The objective of Certbot, Let's Encrypt, and the ACME (Automated
 Certificate Management Environment) protocol is to make it possible
 to set up an HTTPS server and have it automatically obtain a
 browser-trusted certificate, without any human intervention. This is
 accomplished by running a certificate management agent on the web
 server.
 .
 This agent is used to:
 .
   - Automatically prove to the Let's Encrypt CA that you control the website
   - Obtain a browser-trusted certificate and set it up on your web server
   - Keep track of when your certificate is going to expire, and renew it
   - Help you revoke the certificate if that ever becomes necessary.
 .
 This package contains the Apache plugin to the main application.
Homepage: https://letsencrypt.org/

Package: python3-certifi
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 41
Maintainer: Sebastien Delafond <seb@debian.org>
Architecture: all
Source: python-certifi
Version: 2025.1.31+ds-1
Depends: ca-certificates, python3:any
Description: root certificates for validating SSL certs and verifying TLS hosts (python3)
 Certifi is a carefully curated collection of Root Certificates for
 validating the trustworthiness of SSL certificates while verifying
 the identity of TLS hosts. It has been extracted from the Requests
 project.
 .
 The version of certifi in this Debian package is patched to return
 the location of Debian-provided CA certificates, instead of those
 packaged by upstream.
 .
 This is the python3 package.
Homepage: https://github.com/certifi/python-certifi

Package: python3-cffi-backend
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 238
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: python-cffi
Version: 1.17.1-3
Provides: python3-cffi-backend-api-9729, python3-cffi-backend-api-max (= 10495), python3-cffi-backend-api-min (= 9729)
Depends: python3 (<< 3.14), python3 (>= 3.13~), libc6 (>= 2.38), libffi8 (>= 3.4)
Description: Foreign Function Interface for Python 3 calling C code - runtime
 Convenient and reliable way of calling C code from Python 3.
 .
 The aim of this project is to provide a convenient and reliable way of calling
 C code from Python. It keeps Python logic in Python, and minimises the C
 required. It is able to work at either the C API or ABI level, unlike most
 other approaches, that only support the ABI level.
 .
 This package contains the runtime support for pre-built cffi modules.
Homepage: https://cffi.readthedocs.org/

Package: python3-chardet
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1141
Maintainer: Piotr Ożarowski <piotr@debian.org>
Architecture: all
Multi-Arch: foreign
Source: chardet
Version: 5.2.0+dfsg-2
Replaces: python-chardet (<< 3.0.4-6)
Depends: python3:any
Breaks: python-chardet (<< 3.0.4-6)
Description: Universal Character Encoding Detector (Python3)
 Chardet is a continuation of Mark Pilgrim's excellent original chardet port
 from C, and Ian Cordasco's charade Python 3-compatible fork.
 Chardet takes a sequence of bytes in an unknown character encoding, and
 attempts to determine the encoding.
 .
 Supported encodings:
  * Big5, GB2312/GB18030, EUC-TW, HZ-GB-2312, and ISO-2022-CN (Traditional
    and Simplified Chinese)
  * EUC-JP, SHIFT_JIS, and ISO-2022-JP (Japanese)
  * EUC-KR and ISO-2022-KR (Korean)
  * KOI8-R, MacCyrillic, IBM855, IBM866, ISO-8859-5, and windows-1251 (Russian)
  * ISO-8859-2 and windows-1250 (Hungarian)
  * ISO-8859-5 and windows-1251 (Bulgarian)
  * ISO-8859-1 and windows-1252 (Western European languages)
  * ISO-8859-7 and windows-1253 (Greek)
  * ISO-8859-8 and windows-1255 (Visual and Logical Hebrew)
  * TIS-620 (Thai)
  * UTF-32 BE, LE, 3412-ordered, or 2143-ordered (with a BOM)
  * UTF-16 BE or LE (with a BOM)
  * UTF-8 (with or without a BOM)
  * ASCII
 .
 This library is a port of the auto-detection code in Mozilla.
 .
 This package contains the Python 3 version of the library.
Homepage: https://github.com/chardet/chardet

Package: python3-charset-normalizer
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 495
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: amd64
Source: python-charset-normalizer
Version: 3.4.2-1
Depends: python3 (<< 3.14), python3 (>= 3.13~), python3:any, libc6 (>= 2.14)
Suggests: python-charset-normalizer-doc
Description: charset, encoding and language detection (Python 3)
 charset-normalizer is a library for detection of charsets, encodings,
 and languages in Python programs. It can be compared to chardet, with
 a different approach, which intends to make it faster and more reliable.
 charset-normalizer can also detect natural languages.
 .
 All IANA character set names for which the Python core library provides
 codecs are supported.
 .
 This package installs the library for Python 3.
Homepage: https://github.com/ousret/charset_normalizer

Package: python3-configargparse
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 114
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Source: python-configargparse
Version: 1.7-2
Depends: python3:any
Description: replacement for argparse with config files and environment variables
 Applications with more than a handful of user-settable options are best
 configured through a combination of command line args, config files,
 hard-coded defaults, and in some cases, environment variables.
 .
 Python’s command line parsing modules such as argparse have very limited
 support for config files and environment variables, so this module extends
 argparse to add these features.
Homepage: https://github.com/zorro3/ConfigArgParse

Package: python3-configobj
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 162
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Source: configobj
Version: 5.0.9-1
Depends: python3:any
Suggests: python-configobj-doc
Description: simple but powerful config file reader and writer for Python 3
 ConfigObj is a simple but powerful config file reader and writer: an
 ini file round tripper. Its main feature is that it is very easy to
 use, with a straightforward programmer's interface and a simple
 syntax for config files. It has lots of other features, though:
 .
  * Nested sections (subsections), to any level
  * List values
  * Multiple line values
  * String interpolation (substitution)
  * Integrated with a powerful validation system
    + including automatic type checking/conversion
    + and allowing default values
    + repeated sections
  * All comments in the file are preserved
  * The order of keys/sections is preserved
  * Full Unicode support
  * Powerful unrepr mode for storing/retrieving Python data-types
 .
  This is the Python 3 version of the package.
Homepage: http://www.voidspace.org.uk/python/configobj.html

Package: python3-cryptography
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 3866
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: amd64
Source: python-cryptography
Version: 43.0.0-3+deb13u1
Depends: python3-bcrypt, python3 (>= 3~), python3-cffi-backend-api-min (<= 9729), python3-cffi-backend-api-max (>= 9729), python3:any, libc6 (>= 2.34), libgcc-s1 (>= 4.2), libssl3t64 (>= 3.0.0)
Suggests: python-cryptography-doc, python3-cryptography-vectors
Description: Python library exposing cryptographic recipes and primitives
 The cryptography library is designed to be a "one-stop-shop" for
 all your cryptographic needs in Python.
 .
 As an alternative to the libraries that came before it, cryptography
 tries to address some of the issues with those libraries:
  - Lack of PyPy and Python 3 support.
  - Lack of maintenance.
  - Use of poor implementations of algorithms (i.e. ones with known
    side-channel attacks).
  - Lack of high level, "Cryptography for humans", APIs.
  - Absence of algorithms such as AES-GCM.
  - Poor introspectability, and thus poor testability.
  - Extremely error prone APIs, and bad defaults.
Homepage: https://cryptography.io/

Package: python3-dateutil
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 324
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Source: python-dateutil
Version: 2.9.0-4
Depends: python3:any, tzdata
Description: powerful extensions to the standard Python 3 datetime module
 It features:
 .
  * computing of relative deltas (next month, next year, next monday, last week
    of month, etc);
  * computing of relative deltas between two given date and/or datetime objects
  * computing of dates based on very flexible recurrence rules, using a superset
    of the iCalendar specification. Parsing of RFC strings is supported as well.
  * generic parsing of dates in almost any string format
  * timezone (tzinfo) implementations for tzfile(5) format files
    (/etc/localtime, /usr/share/zoneinfo, etc), TZ environment string (in all
    known formats), iCalendar format files, given ranges (with help from
    relative deltas), local machine timezone, fixed offset timezone, UTC
    timezone
  * computing of Easter Sunday dates for any given year, using Western, Orthodox
    or Julian algorithms
Homepage: https://github.com/dateutil/dateutil

Package: python3-dbus
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 415
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: dbus-python
Version: 1.4.0-1
Depends: python3 (<< 3.14), python3 (>= 3.13~), python3:any, libc6 (>= 2.4), libdbus-1-3 (>= 1.10), libglib2.0-0t64 (>= 2.16.0)
Recommends: python3-gi
Suggests: python-dbus-doc
Description: simple interprocess messaging system (Python 3 interface)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package provides a Python 3 interface to D-Bus.
 .
 See the dbus description for more information about D-Bus in general.
Homepage: https://www.freedesktop.org/wiki/Software/DBusBindings#Python

Package: python3-debconf
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 19
Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>
Architecture: all
Source: debconf
Version: 1.5.91
Depends: debconf (= 1.5.91), python3:any
Description: interact with debconf from Python 3
 Debconf is a configuration management system for debian packages. Packages
 use Debconf to ask questions when they are installed.
 .
 This package provides a debconf module to allow Python 3 programs to
 interact with a debconf frontend.

Package: python3-debian
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 608
Maintainer: Debian python-debian Maintainers <pkg-python-debian-maint@lists.alioth.debian.org>
Architecture: all
Source: python-debian
Version: 1.0.1
Depends: python3-charset-normalizer, python3:any
Suggests: gpgv, python3-apt, zstd
Description: Python 3 modules to work with Debian-related data formats
 This package provides Python 3 modules that abstract many formats of Debian
 related files. Currently handled are:
  * Debtags information (debian.debtags module)
  * debian/changelog (debian.changelog module)
  * Packages files, pdiffs (debian.debian_support module)
  * Control files of single or multiple RFC822-style paragraphs, e.g.
    debian/control, .changes, .dsc, Packages, Sources, Release, etc.
    (debian.deb822 module)
  * Raw .deb and .ar files, with (read-only) access to contained
    files and meta-information
Homepage: https://salsa.debian.org/python-debian-team/python-debian

Package: python3-debianbts
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 54
Maintainer: Bastian Venthur <venthur@debian.org>
Architecture: all
Source: python-debianbts
Version: 4.1.1
Depends: python3:any
Description: Python interface to Debian's Bug Tracking System
 This package provides the debianbts module, which allows one to query Debian's
 BTS via it's SOAP-interface and returns the answer in Python's native data
 types.

Package: python3-distro
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 83
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Source: python-distro
Version: 1.9.0-1
Depends: lsb-release, python3:any
Description: Linux OS platform information API
 distro (for: Linux Distribution) provides information about the Linux
 distribution it runs on, such as a reliable machine-readable ID, or version
 information.
 .
 It is a renewed alternative implementation for Python's original
 platform.linux_distribution function, but it also provides much more
 functionality which isn't necessarily Python bound like a command-line
 interface.
 .
 This is the Python 3 version of the library.
Homepage: https://github.com/python-distro/distro

Package: python3-distro-info
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 42
Maintainer: Benjamin Drung <bdrung@debian.org>
Architecture: all
Source: distro-info
Version: 1.13
Depends: distro-info-data (>= 0.46), python3:any
Description: information about distributions' releases (Python 3 module)
 Information about all releases of Debian and Ubuntu.
 .
 This package contains a Python 3 module for parsing the data in
 distro-info-data. There is also a command line interface in the distro-info
 package.

Package: python3-firewall
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1238
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: all
Source: firewalld
Version: 2.3.1-1+deb13u1
Depends: gir1.2-glib-2.0, python3-gi, python3-dbus, python3:any
Description: Python3 bindings for firewalld
 firewalld is a dynamically managed firewall daemon with support for
 network/firewall zones to define the trust level of network connections
 or interfaces. It has support for IPv4, IPv6 firewall settings and for
 ethernet bridges and has a separation of runtime and persistent
 configuration options.
 It also provides a D-Bus interface for services or applications to add
 and apply firewall rules on-the-fly.
 .
 This package provides Python3 bindings for firewalld.
Homepage: https://www.firewalld.org/

Package: python3-fqdn
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 30
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Source: python-fqdn
Version: 1.5.1-2
Depends: python3-cached-property | python3-supported-min (>= 3.8), python3:any
Description: Python library to validate fully qualified domain names (FQDNs)
 This package validates FQDNs conforming to the Internet Engineering
 Task Force (IETF) specification (RFC 1123 in particular). The design
 intent is to validate that a string would be traditionally acceptable
 as a public Internet hostname to RFC-conforming software. Configuration
 options can be used to obtain more relaxed checks.
Homepage: https://github.com/ypcrts/fqdn

Package: python3-gi
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 780
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: pygobject (3.50.0-4)
Version: 3.50.0-4+b1
Depends: gir1.2-glib-2.0 (>= 1.64.0), gir1.2-girepository-2.0, python3 (<< 3.14), python3 (>= 3.13~), python3:any, libc6 (>= 2.14), libffi8 (>= 3.4), libgirepository-1.0-1 (>= 1.71.0), libgirepository-1.0-1-with-libffi8 (>= 1.62.0-4~), libglib2.0-0t64 (>= 2.78.0)
Description: Python 3 bindings for gobject-introspection libraries
 GObject is an abstraction layer that allows programming with an object
 paradigm that is compatible with many languages. It is a part of Glib,
 the core library used to build GTK+ and GNOME.
 .
 This package contains the Python 3 binding generator for libraries that
 support gobject-introspection, i. e. which ship a gir1.2-<name>-<version>
 package. With these packages, the libraries can be used from Python 3.
Homepage: https://pygobject.readthedocs.io/

Package: python3-httplib2
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 143
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Source: python-httplib2
Version: 0.22.0-1+deb13u1
Depends: ca-certificates, python3-pyparsing, python3:any
Breaks: python3-wsgi-intercept (<< 1.9.0)
Description: comprehensive HTTP client library written for Python3
 httplib2.py supports many features left out of other HTTP libraries.
  * HTTP and HTTPS
  * Keep-Alive
  * Authentication
  * Caching
  * All Methods
  * Redirects
  * Compression
  * Lost update support
  * Unit Tested
 .
 This package provides module for python3 series.
Homepage: https://github.com/httplib2/httplib2

Package: python3-icu
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 2917
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Source: pyicu (2.14-1)
Version: 2.14-1+b3
Depends: libc6 (>= 2.33), libgcc-s1 (>= 3.0), libicu76 (>= 76.1-1~), libstdc++6 (>= 5), python3 (<< 3.14), python3 (>= 3.13~), python3:any
Description: Python 3 extension wrapping the ICU C++ API
 ICU is a C++ and C library that provides robust and full-featured
 Unicode and locale support. This package provides an extension for
 Python 3 which wraps the ICU C++ API.
Homepage: https://gitlab.pyicu.org/main/pyicu

Package: python3-idna
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 373
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Source: python-idna
Version: 3.10-1+deb13u1
Depends: python3:any
Description: Python IDNA2008 (RFC 5891) handling (Python 3)
 A library to support the Internationalised Domain Names in Applications (IDNA)
 protocol as specified in RFC 5891. This version of the protocol is often
 referred to as “IDNA2008” and can produce different results from the earlier
 standard from 2003.
 .
 The library is also intended to act as a suitable drop-in replacement for the
 “encodings.idna” module that comes with the Python standard library but
 currently only supports the older 2003 specification.
 .
 This package contains the module for Python 3.
Homepage: https://github.com/kjd/idna

Package: python3-inflect
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 145
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Source: python-inflect
Version: 7.3.1-2
Depends: python3-more-itertools, python3-typeguard, python3-typing-extensions | python3-supported-min (>= 3.9), python3:any
Description: Generate plurals, singular nouns, ordinals, indefinite articles (Python 3)
 The inflect Python module correctly generates plurals, singular nouns,
 ordinals and indefinite articles. It can also convert numbers to words.
 .
 This package contains the Python 3 version of this module.
Homepage: https://github.com/jaraco/inflect

Package: python3-isoduration
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 58
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Source: python-isoduration
Version: 20.11.0+git20211126.ae0bd61-2
Depends: python3-arrow, python3:any
Description: Operations with ISO 8601 durations (Python 3 package)
 ISO 8601 supports time durations in string format, for example
 "P3Y6M4DT12H30M5S" represents a duration of 3 years, 6 months, 4 days,
 12 hours, 30 minutes, and 5 seconds. This package supports working
 with such durations, addressing the shortcomings of the isodate package.
Homepage: https://github.com/bolsote/isoduration

Package: python3-jaraco.context
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 36
Maintainer: Jeroen Ploemen <jcfp@debian.org>
Architecture: all
Source: jaraco.context
Version: 6.0.1-1+deb13u1
Depends: python3-setuptools | python3-supported-min (>= 3.12), python3:any
Description: jaraco contextlib extensions
 Various context managers extending functionality of Python's
 contextlib, mostly needed as a dependency of other projects
 involving the same upstream developer.
Homepage: https://github.com/jaraco/jaraco.context

Package: python3-jaraco.functools
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 48
Maintainer: Jeroen Ploemen <jcfp@debian.org>
Architecture: all
Source: python-jaraco.functools
Version: 4.1.0-1
Depends: python3-more-itertools, python3:any
Description: additional functools in the spirit of stdlib's functools
 Jaraco.functools provides additional functools in the spirit of stdlib's
 functools, mostly needed as a dependency of other projects by the same
 upstream developer such as the 'tempora' module.
Homepage: https://github.com/jaraco/jaraco.functools

Package: python3-jinja2
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 532
Maintainer: Piotr Ożarowski <piotr@debian.org>
Architecture: all
Source: jinja2
Version: 3.1.6-1
Replaces: python-jinja2 (<< 2.11.1-1)
Depends: python3-markupsafe (>= 2.0), python3:any
Recommends: python3-babel
Suggests: python-jinja2-doc
Breaks: python-jinja2 (<< 2.11.1-1)
Description: small but fast and easy to use stand-alone template engine
 Jinja2 is a template engine written in pure Python. It provides a Django
 inspired non-XML syntax but supports inline expressions and an optional
 sandboxed environment.
 .
 The key-features are:
  * Configurable syntax. If you are generating LaTeX or other formats with
    Jinja2 you can change the delimiters to something that integrates better
    into the LaTeX markup.
  * Fast. While performance is not the primarily target of Jinja2 it’s
    surprisingly fast. The overhead compared to regular Python code was reduced
    to the very minimum.
  * Easy to debug. Jinja2 integrates directly into the Python traceback system
    which allows you to debug Jinja2 templates with regular Python debugging
    helpers.
  * Secure. It’s possible to evaluate untrusted template code if the optional
    sandbox is enabled. This allows Jinja2 to be used as templating language
    for applications where users may modify the template design.
Homepage: http://jinja.pocoo.org/

Package: python3-josepy
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 104
Maintainer: Debian Let's Encrypt <team+letsencrypt@tracker.debian.org>
Architecture: all
Source: python-josepy
Version: 2.0.0-1
Depends: python3-cryptography (>= 1.5), python3:any
Description: JOSE implementation for Python 3.x
 This package is a Python implementation of the standards developed by
 IETF Javascript Object Signing and Encryption (Active WG), in
 particular the following RFCs:
 .
   - JSON Web Algorithms (JWA)
   - JSON Web Key (JWK)
   - JSON Web Signature (JWS)
 .
 This package was originally developed as part of the ACME protocol
 implementation.  This is the Python 3 library.
Homepage: https://certbot.eff.org/

Package: python3-json-pointer
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 45
Maintainer: Debian OpenStack <team+openstack@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Source: python-json-pointer
Version: 2.4-3
Depends: python3:any
Description: resolve JSON pointers - Python 3.x
 Python-json-pointer is a small library to resolve JSON pointers according to
 the IETF draft specification. JSON Pointer defines a string syntax for
 identifying a specific value within a JavaScript Object Notation (JSON)
 document.
 .
 This package provides the module for Python 3.x.
Homepage: https://github.com/stefankoegl/python-json-pointer

Package: python3-jsonpatch
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 58
Maintainer: Debian OpenStack <team+openstack@tracker.debian.org>
Architecture: all
Source: python-json-patch
Version: 1.32-5
Depends: python3-json-pointer, python3:any
Description: library to apply JSON patches - Python 3.x
 Python-json-patch is a Python module (a library) to apply JSON Patches
 according to the IETF draft specification.
 .
 From the IETF site:
 .
 JavaScript Object Notation (JSON) [RFC4627] is a common format for the
 exchange and storage of structured data.  HTTP PATCH [RFC5789] extends the
 Hypertext Transfer Protocol (HTTP) [RFC2616] with a method to perform partial
 modifications to resources.
 .
 JSON Patch is a format (identified by the media type "application/
 json-patch") for expressing a sequence of operations to apply to a target JSON
 document, suitable for use with the HTTP PATCH method.
 .
 This format is also potentially useful in other cases when it's necessary to
 make partial updates to a JSON document.
 .
 This package provides the Python 3.x module.
Homepage: https://github.com/stefankoegl/python-json-patch

Package: python3-jsonschema
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 485
Maintainer: Debian OpenStack <team+openstack@tracker.debian.org>
Architecture: all
Source: python-jsonschema
Version: 4.19.2-6
Depends: python3-attr, python3-jsonschema-specifications, python3-referencing, python3-rpds-py, python3:any
Recommends: python3-fqdn, python3-idna, python3-isoduration, python3-json-pointer, python3-rfc3339-validator, python3-rfc3986-validator, python3-rfc3987, python3-uritemplate, python3-webcolors
Suggests: python-jsonschema-doc
Description: An(other) implementation of JSON Schema
 JSON Schema is a specification for a JSON-based format for defining the
 structure of JSON data. JSON Schema provides a contract for what JSON data is
 required for a given application and how it can be modified, much like what
 XML Schema provides for XML. JSON Schema is intended to provide validation,
 documentation, and interaction control of JSON data.
 .
 This package has full support for Draft 2020-12, Draft 2019-09, Draft 7,
 Draft 6, Draft 4 and Draft 3.
Homepage: https://github.com/Julian/jsonschema

Package: python3-jsonschema-specifications
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 81
Maintainer: Debian OpenStack <team+openstack@tracker.debian.org>
Architecture: all
Source: python-jsonschema-specifications
Version: 2023.12.1-2
Depends: python3-referencing, python3-rpds-py, python3-importlib-resources | python3-supported-min (>= 3.9), python3:any
Description: JSON Schema meta-schemas and vocabularies, exposed as a Registry
 This package contains JSON support files from the JSON Schema Specifications
 (metaschemas, vocabularies, etc.), packaged for runtime access from Python as
 a referencing-based Schema Registry.
 .
 This package contains the Python 3.x module.
Homepage: https://github.com/python-jsonschema/jsonschema-specifications

Package: python3-jwt
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 118
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Source: pyjwt
Version: 2.10.1-2+deb13u1
Depends: python3:any
Recommends: python3-cryptography
Suggests: python-jwt-doc, python3-crypto
Description: Python 3 implementation of JSON Web Token
 PyJWT implements the JSON Web Token draft 01, a way of representing
 signed content using JSON data structures.
 .
 Supported algorithms for cryptographic signing:
 .
   * HS256 - HMAC using SHA-256 hash algorithm (default)
   * HS384 - HMAC using SHA-384 hash algorithm
   * HS512 - HMAC using SHA-512 hash algorithm
   * ES256 - ECDSA signature algorithm using SHA-256 hash algorithm
   * ES256K - ECDSA signature algorithm with secp256k1 curve using SHA-256
              hash algorithm
   * ES384 - ECDSA signature algorithm using SHA-384 hash algorithm
   * ES512 - ECDSA signature algorithm using SHA-512 hash algorithm
   * RS256 - RSASSA-PKCS1-v1_5 signature algorithm using SHA-256 hash
             algorithm
   * RS384 - RSASSA-PKCS1-v1_5 signature algorithm using SHA-384 hash
             algorithm
   * RS512 - RSASSA-PKCS1-v1_5 signature algorithm using SHA-512 hash
             algorithm
   * PS256 - RSASSA-PSS signature using SHA-256 and MGF1 padding with SHA-256
   * PS384 - RSASSA-PSS signature using SHA-384 and MGF1 padding with SHA-384
   * PS512 - RSASSA-PSS signature using SHA-512 and MGF1 padding with SHA-512
   * EdDSA - Both Ed25519 signature using SHA-512 and Ed448 signature using
             SHA-3 are supported. Ed25519 and Ed448 provide 128-bit and
             224-bit security respectively
 .
 Supported reserved claim names:
   - "exp" (Expiration Time) Claim
 .
 This package contains the Python 3 version of the library.
Homepage: https://github.com/jpadilla/pyjwt

Package: python3-linkify-it
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 79
Maintainer: Georges Khaznadar <georgesk@debian.org>
Architecture: all
Source: linkify-it-py
Version: 2.0.3-1
Depends: python3-uc-micro, python3:any, python3
Description: links recognition library with FULL unicode support
 linkify-it-py is focused on high quality link patterns detection in plain text.
 .
 Why it's awesome:
 .
   - Full unicode support, with astral characters!
   - International domains support.
   - Allows rules extension & custom normalizers.
Homepage: https://github.com/tsutsu3/linkify-it-py

Package: python3-markdown-it
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 287
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Source: markdown-it-py
Version: 3.0.0-3
Depends: python3-mdurl, python3:any, python3-linkify-it
Breaks: python3-mdit-py-plugins (<< 0.4.0-1)
Description: Python port of markdown-it and some its associated plugins
 High speed Python markdown parser based in markdown-it. markdown-it-py
 follows the CommonMark spec for baseline parsing. Also, new syntax
 rules can be added and even replace existing ones. New syntax extensions
 can be added to extend the parser.
Homepage: https://github.com/executablebooks/markdown-it-py

Package: python3-markupsafe
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 53
Maintainer: Piotr Ożarowski <piotr@debian.org>
Architecture: amd64
Source: markupsafe (2.1.5-1)
Version: 2.1.5-1+b3
Depends: python3 (<< 3.14), python3 (>= 3.13~), python3:any, libc6 (>= 2.14)
Description: HTML/XHTML/XML string library
 MarkupSafe is a Python library implementing a unicode subclass that is
 aware of HTML escaping rules. It can be used to implement automatic
 string escaping.
Homepage: https://palletsprojects.com/p/markupsafe/

Package: python3-mdurl
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 42
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Source: mdurl
Version: 0.1.2-1
Depends: python3:any
Description: Python port of the JavaScript mdurl package
 mdurl is a set of URL utilities for the markdown-it-py package. It
 provides a pure-Python implementation of several functions from the
 original JavaScript package, such as .decode(), .parse(), .encode().
Homepage: https://github.com/executablebooks/mdurl

Package: python3-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 112
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: python3-defaults
Version: 3.13.5-1
Depends: dpkg (>= 1.13.20)
Pre-Depends: python3.13-minimal (>= 3.13.5-1~)
Description: minimal subset of the Python language (default python3 version)
 This package contains the interpreter and some essential modules.  It's used
 in the boot process for some basic tasks.
 See /usr/share/doc/python3.13-minimal/README.Debian for a list of the modules
 contained in this package.
Homepage: https://www.python.org/
Cnf-Visible-Pkgname: python3

Package: python3-more-itertools
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 292
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Source: more-itertools
Version: 10.7.0-1
Depends: python3:any
Description: library with routines for operating on iterables, beyond itertools (Python 3)
 Python's itertools library is a gem - you can compose elegant solutions
 for a variety of problems with the functions it provides.
 More-itertools collects additional building blocks, recipes,
 and routines for working with Python iterables.
 .
 This package contains the module for Python 3.
Homepage: https://github.com/more-itertools/more-itertools/

Package: python3-netifaces
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 57
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: netifaces (0.11.0-2)
Version: 0.11.0-2+b6
Depends: python3 (<< 3.14), python3 (>= 3.13~), libc6 (>= 2.4)
Description: portable network interface information - Python 3.x
 netifaces provides a (hopefully portable-ish) way for Python programmers to
 get access to a list of the network interfaces on the local machine, and to
 obtain the addresses of those network interfaces.
 .
 This package contains the module for Python 3.x.
Homepage: https://alastairs-place.net/projects/netifaces/

Package: python3-netplan
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 153
Maintainer: Debian Networking Team <team+networking@tracker.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: netplan.io
Version: 1.1.2-7
Replaces: netplan.io (<< 0.107-3~)
Depends: python3 (>= 3~), python3:any, libc6 (>= 2.4), libnetplan1 (= 1.1.2-7), python3-cffi-backend
Breaks: netplan.io (<< 0.107-3~)
Description: Declarative network configuration Python bindings
 Netplan reads YAML network configuration files which are written
 by administrators, installers, cloud image instantiations, or other OS
 deployments. During early boot it then generates backend specific
 configuration files in /run to hand off control of devices to a particular
 networking daemon.
 .
 Currently supported backends are networkd and NetworkManager.
 .
 This package provides a CFFI based Python bindings to libnetplan.
Homepage: https://netplan.io/

Package: python3-nftables
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 67
Maintainer: Debian Netfilter Packaging Team <team+pkg-netfilter-team@tracker.debian.org>
Architecture: amd64
Source: nftables
Version: 1.1.3-1
Depends: libnftables1 (= 1.1.3-1), python3-jsonschema, python3:any
Description: nftables/libnftables python3 module
 The libnftables library provides high level semantics to interact with the
 nftables framework by the Netfilter project.
 .
 nftables replaces the old popular iptables, ip6tables, arptables and ebtables.
 .
 Netfilter software and nftables in particular are used in applications such
 as Internet connection sharing, firewalls, IP accounting, transparent
 proxying, advanced routing and traffic control.
 .
 A Linux kernel >= 3.13 is required. However, >= 4.14 is recommended.
 .
 This package contains the libnftables python3 bindings.
Homepage: https://www.netfilter.org/

Package: python3-oauthlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 562
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Source: python-oauthlib
Version: 3.2.2-3
Depends: python3:any, python3-blinker, python3-cryptography, python3-jwt
Description: generic, spec-compliant implementation of OAuth for Python3
 OAuthLib is a generic utility which implements the logic of OAuth without
 assuming a specific HTTP request object. It can be used to graft OAuth support
 onto HTTP libraries.
 .
 OAuth 1 is fully supported per the RFC for both clients and providers.
 .
 OAuth 2 client and provider support for:
 .
   - Authorization Code Grant
   - Implicit Grant
   - Client Credentials Grant
   - Resource Owner Password Credentials Grant
   - Refresh Tokens
   - Bearer Tokens
   - Draft MAC tokens
   - Token Revocation
   - OpenID Connect Authentication
 .
 This package contains the Python 3 version of the library.
Homepage: https://github.com/idan/oauthlib

Package: python3-openssl
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 241
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Source: pyopenssl
Version: 25.0.0-1+deb13u1
Depends: python3-typing-extensions | python3-supported-min (>= 3.13), python3-cryptography (<< 45), python3-cryptography (>= 41.0.5), python3:any
Suggests: python-openssl-doc
Description: Python 3 wrapper around the OpenSSL library
 High-level wrapper around a subset of the OpenSSL library, includes
 .
   * SSL.Connection objects, wrapping the methods of Python's portable
     sockets
   * Callbacks written in Python
   * Extensive error-handling mechanism, mirroring OpenSSL's error
     codes
 .
 A lot of the object methods do nothing more than calling a
 corresponding function in the OpenSSL library.
 .
 This package contains the Python 3 version of pyopenssl.
Homepage: https://pyopenssl.org/

Package: python3-parsedatetime
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 184
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Source: parsedatetime
Version: 2.6-3
Depends: python3:any
Recommends: python3-icu
Description: Python 3 module to parse human-readable date/time expressions
 parsedatetime is able to parse, for example, the following:
 .
   * August 25th, 2008
   * 25 Aug 2008
   * Aug 25 5pm
   * 5pm August 25
   * next saturday
   * tomorrow
   * next thursday at 4pm
   * at 4pm
   * eod
   * tomorrow eod
   * eod tuesday
   * eoy
   * eom
   * in 5 minutes
   * 5 minutes from now
   * 5 hours before now
   * 2 hours before noon
   * 2 days from tomorrow
 .
 This package provides the modules for Python 3.
Homepage: https://github.com/bear/parsedatetime

Package: python3-pkg-resources
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 696
Maintainer: Matthias Klose <doko@debian.org>
Architecture: all
Multi-Arch: foreign
Source: setuptools
Version: 78.1.1-0.1
Replaces: python3-setuptools (<< 75.2)
Depends: python3-autocommand, python3-inflect, python3-jaraco.context, python3-jaraco.functools, python3-more-itertools, python3:any
Suggests: python3-setuptools
Breaks: python3-setuptools (<< 75.2)
Description: Package Discovery and Resource Access using pkg_resources
 The pkg_resources module provides an API for Python libraries to
 access their resource files, and for extensible applications and
 frameworks to automatically discover plugins.  It also provides
 runtime support for using C extensions that are inside zipfile-format
 eggs, support for merging packages that have separately-distributed
 modules or subpackages, and APIs for managing Python's current
 "working set" of active packages.
Homepage: https://pypi.python.org/pypi/setuptools

Package: python3-pycurl
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 206
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: amd64
Source: pycurl
Version: 7.45.6-1
Depends: python3 (<< 3.14), python3 (>= 3.13~), python3:any, libc6 (>= 2.15), libcurl3t64-gnutls (>= 8.13.0)
Suggests: libcurl4-gnutls-dev, python-pycurl-doc
Description: Python bindings to libcurl (Python 3)
 This module provides the Python bindings to libcurl. Please refer to
 the libcurl documentation available in libcurl4-gnutls-dev Debian package.
 .
 NOTE: the SSL support is provided by GnuTLS.
 .
 This package contains PyCURL for Python 3.
Homepage: http://pycurl.sourceforge.net

Package: python3-pygments
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 4521
Maintainer: Piotr Ożarowski <piotr@debian.org>
Architecture: all
Multi-Arch: foreign
Source: pygments
Version: 2.18.0+dfsg-2
Replaces: python-pygments (<< 2.3.1+dfsg-4~)
Depends: python3:any
Suggests: python-pygments-doc, ttf-bitstream-vera
Breaks: python-pygments (<< 2.3.1+dfsg-4~)
Description: syntax highlighting package written in Python 3
 Pygments aims to be a generic syntax highlighter for general use in all kinds
 of software such as forum systems, wikis or other applications that need to
 prettify source code.
 .
 Highlights are:
   * a wide range of common languages and markup formats is supported
   * special attention is paid to details, increasing quality by a fair amount
   * support for new languages and formats are added easily
   * a number of output formats, presently HTML, LaTeX and ANSI sequences
   * it is usable as a command-line tool and as a library
Homepage: https://pygments.org/

Package: python3-pyparsing
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 472
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Source: pyparsing
Version: 3.1.2-1
Depends: python3:any
Suggests: python-pyparsing-doc
Breaks: python3-translate (<< 3.6.0~), translate-toolkit (<< 3.6.0~)
Description: alternative to creating and executing simple grammars - Python 3.x
 The parsing module is an alternative approach to creating and
 executing simple grammars, vs. the traditional lex/yacc approach, or
 the use of regular expressions.  The parsing module provides a
 library of classes that client code uses to construct the grammar
 directly in Python code.
 .
 Here's an example:
 .
  from pyparsing import Word, alphas
  greet = Word(alphas) + "," + Word(alphas) + "!"
  hello = "Hello, World!"
  print hello, "->", greet.parseString(hello)
 .
 This package contains the Python 3.x version of python-pyparsing.
Homepage: https://github.com/pyparsing/pyparsing/

Package: python3-pyrsistent
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 257
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: pyrsistent (0.20.0-2)
Version: 0.20.0-2+b1
Depends: python3 (<< 3.14), python3 (>= 3.13~), python3:any, libc6 (>= 2.14)
Description: persistent/functional/immutable data structures for Python
 Pyrsistent is a number of persistent collections (sometimes referred
 to as functional data structures). Persistent in  the sense that they
 are immutable.
 .
 All methods on a data structure that would normally mutate it instead
 return a new copy of the structure containing the requested updates.
 The original structure is left untouched.
 .
 The collection types and key features currently implemented are:
 .
  * PVector, similar to a python list
  * PMap, similar to dict
  * PSet, similar to set
  * PRecord, a PMap on steroids with fixed fields, optional type and
    invariant checking and much more
  * PClass, a Python class fixed fields, optional type and invariant
    checking and much more
  * Checked collections, PVector, PMap and PSet with optional type
    and invariance checks and more
  * PBag, similar to collections.Counter
  * PList, a classic singly linked list
  * PDeque, similar to collections.deque
  * Immutable object type (immutable) built on the named tuple
  * freeze and thaw functions to convert between pythons standard
    collections and pyrsistent collections.
  * Flexible transformations of arbitrarily complex structures built
    from PMaps and PVectors.
Homepage: https://github.com/tobgu/pyrsistent/

Package: python3-pysimplesoap
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 191
Maintainer: Sandro Tosi <morph@debian.org>
Architecture: all
Source: pysimplesoap
Version: 1.16.2-5
Depends: python3-httplib2, python3-pycurl, python3:any
Description: simple and lightweight SOAP Library (Python 3)
 Python simple and lightweight SOAP library for client and server webservices
 interfaces, aimed to be as small and easy as possible, supporting most common
 functionality. Initially it was inspired by PHP Soap Extension (mimicking its
 functionality, simplicity and ease of use), with many advanced features added.
 .
 This package contains the Python 3 version of pysimplesoap .
Homepage: https://github.com/pysimplesoap/pysimplesoap/

Package: python3-pytz
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1191
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Source: python-tz
Version: 2025.2-3
Replaces: python3-tz (<< 2025.1-2)
Depends: tzdata, python3:any
Breaks: python3-tz (<< 2025.1-2)
Description: Python3 version of the Olson timezone database
 python3-pytz brings the Olson tz database into Python. This library allows
 accurate and cross platform timezone calculations using Python 2.3 or higher.
 It also solves the issue of ambiguous times at the end of daylight savings,
 which you can read more about in the Python Library Reference
 (datetime.tzinfo).
 .
 This package contains the Python 3 version of the library.
Homepage: https://pythonhosted.org/pytz/

Package: python3-referencing
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 139
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Source: referencing
Version: 0.36.2-1
Depends: python3-attr, python3-rpds-py, python3-typing-extensions | python3-supported-min (>= 3.13), python3:any
Description: Implementation-agnostic implementation of JSON reference resolution
 A way for e.g. JSON Schema tooling to resolve the $ref keywords
 across all drafts without needing to implement support themselves.
 .
 This library is meant for use both by implementers of JSON
 referencing-related tooling – like JSON Schema implementations
 supporting the $ref keyword – as well as by end-users using said
 implementations who wish to then configure sets of resources (like
 schemas) for use at runtime.
 .
 This package installs the library for Python 3.
Homepage: https://github.com/python-jsonschema/referencing

Package: python3-reportbug
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 374
Maintainer: Reportbug Maintainers <debian-reportbug@lists.debian.org>
Architecture: all
Source: reportbug
Version: 13.2.0
Depends: apt, file, python3-apt, python3-debian, python3-debianbts (>= 2.10), python3-requests, sensible-utils, python3:any
Suggests: reportbug
Description: Python modules for interacting with bug tracking systems
 reportbug is a tool designed to make the reporting of bugs in Debian
 and derived distributions relatively painless.
 .
 This package includes Python modules which may be reusable by other
 tools that want to interact with the Debian bug tracking system.
 .
 To actually report a bug, install the reportbug package.

Package: python3-requests
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 241
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Source: requests
Version: 2.32.3+dfsg-5+deb13u1
Depends: python3-certifi, python3-charset-normalizer, python3-idna, python3-urllib3 (>= 1.21.1), python3:any, ca-certificates, python3-chardet (>= 3.0.2)
Suggests: python3-cryptography, python3-idna (>= 2.5), python3-openssl, python3-socks, python-requests-doc
Breaks: awscli (<< 1.11.139)
Description: elegant and simple HTTP library for Python3, built for human beings
 Requests allow you to send HTTP/1.1 requests. You can add headers, form data,
 multipart files, and parameters with simple Python dictionaries, and access
 the response data in the same way. It's powered by httplib and urllib3, but
 it does all the hard work and crazy hacks for you.
 .
 Features
 .
   - International Domains and URLs
   - Keep-Alive & Connection Pooling
   - Sessions with Cookie Persistence
   - Browser-style SSL Verification
   - Basic/Digest Authentication
   - Elegant Key/Value Cookies
   - Automatic Decompression
   - Unicode Response Bodies
   - Multipart File Uploads
   - Connection Timeouts
 .
 This package contains the Python 3 version of the library.
Homepage: https://requests.readthedocs.io/

Package: python3-rfc3339
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 31
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Source: pyrfc3339
Version: 2.0.1-1
Depends: python3:any
Description: parser and generator of RFC 3339-compliant timestamps (Python 3)
 pyRFC3339 parses and generates RFC 3339-compliant timestamps using Python
 datetime.datetime objects.
 .
 This is the Python 3 module.
Homepage: https://github.com/kurtraschke/pyRFC3339

Package: python3-rfc3339-validator
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 23
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Source: rfc3339-validator
Version: 0.1.4-2
Depends: python3:any
Description: RFC 3339 validator (Python library)
 This package provides a validator for date-time strings to determine
 whether they conform to the Internet Engineering Task Force (IETF)
 Internet Date/Time Format (RFC 3339).
Homepage: https://github.com/naimetti/rfc3339-validator

Package: python3-rfc3986-validator
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 28
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Source: rfc3986-validator
Version: 0.1.1-2
Depends: python3:any
Description: RFC 3986 validator (Python library)
 This package provides a validator for URIs to determine whether they
 conform to the Internet Engineering Task Force (IETF) specification
 (RFC 3986).
Homepage: https://github.com/naimetti/rfc3986-validator

Package: python3-rich
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1072
Maintainer: Sandro Tosi <morph@debian.org>
Architecture: all
Source: rich
Version: 13.9.4-1
Depends: python3-markdown-it, python3-pygments (>= 2.14.0), python3-typing-extensions (>= 3.7.4) | python3-supported-min (>= 3.11), python3:any
Description: render rich text, tables, progress bars, syntax highlighting, markdown and more
 Rich is a Python library for rich text and beautiful formatting in the
 terminal.
 .
 The Rich API makes it easy to add color and style to terminal output. Rich can
 also render pretty tables, progress bars, markdown, syntax highlighted source
 code, tracebacks, and more — out of the box.
 .
 Here's a list of the core functionalities of rich:
 .
  * to effortlessly add rich output to your application, you can import the rich
    print method, which has the same signature as the builtin Python function
  * Rich can be installed in the Python REPL, so that any data structures will
    be pretty printed and highlighted
  * for more control over rich terminal content, import and construct a Console
    object. The Console object has a print method which has an intentionally
    similar interface to the builtin print function
  * to insert an emoji in to console output place the name between two colons
  * Rich can render flexible tables with unicode box characters. There is a
    large variety of formatting options for borders, styles, cell alignment etc
  * Rich can render multiple flicker-free progress bars to track long-running
    tasks.
  * Rich can render content in neat columns with equal or optimal width.
  * Rich can render markdown and does a reasonable job of translating the
    formatting to the terminal
  * Rich can render beautiful tracebacks which are easier to read and show more
    code than standard Python tracebacks. You can set Rich as the default
    traceback handler so all uncaught exceptions will be rendered by Rich.
Homepage: https://github.com/Textualize/rich

Package: python3-rpds-py
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 772
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: amd64
Source: rpds-py (0.21.0-2)
Version: 0.21.0-2+b1
Depends: python3 (<< 3.14), python3 (>= 3.13~), python3:any, libc6 (>= 2.34), libgcc-s1 (>= 4.2)
Description: Python bindings to Rust's persistent data structures (rpds)
 Python bindings to the Rust rpds crate for persistent data structures.
 .
 What's here is quite minimal (in transparency, it was written
 initially to support replacing pyrsistent in the referencing
 library). If you see something missing (which is very likely), a PR
 is definitely welcome to add it.
Homepage: https://github.com/crate-py/rpds

Package: python3-serial
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 458
Maintainer: Matthias Klose <doko@debian.org>
Architecture: all
Source: pyserial
Version: 3.5-2
Depends: python3:any
Suggests: python3-wxgtk3.0 | python3-wxgtk
Description: pyserial - module encapsulating access for the serial port
 This module encapsulates the access for the serial port. It provides
 back-ends for standard Python running on Windows, Linux, BSD (possibly
 any POSIX compliant system). The module named "serial" automatically
 selects the appropriate back-end.
Homepage: https://github.com/pyserial/pyserial

Package: python3-six
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 62
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Source: six
Version: 1.17.0-1
Depends: python3:any
Description: Python 2 and 3 compatibility library
 Six is a Python 2 and 3 compatibility library. It provides utility
 functions for smoothing over the differences between the Python versions
 with the goal of writing Python code that is compatible on both Python
 versions.
Homepage: https://github.com/benjaminp/six

Package: python3-typeguard
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 167
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Source: python-typeguard
Version: 4.4.2-1
Depends: python3-importlib-metadata | python3-supported-min (>= 3.10), python3-typing-extensions (>= 4.10.0), python3:any
Description: Run-time type checker for Python
 This library provides run-time type checking for functions defined with
 argument type annotations. This can be done in one of three ways:
  * calling check_argument_types() from within the function body
  * decorating the function with @typechecked
  * using `with TypeChecker('packagename')`
 .
 This package installs the library for Python 3.
Homepage: https://github.com/agronholm/typeguard

Package: python3-typeshed
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 14753
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Source: typeshed
Version: 0.0~git20241223.ea91db2-1
Replaces: python3-types-toml, python3-types-typed-ast
Provides: python3-types-aiofiles (= 24.1), python3-types-antlr4-python3-runtime (= 4.13), python3-types-assertpy (= 1.1), python3-types-atheris (= 2.3), python3-types-aws-xray-sdk (= 2.14), python3-types-beautifulsoup4 (= 4.12), python3-types-bleach (= 6.2), python3-types-boltons (= 24.1), python3-types-braintree (= 4.31), python3-types-cachetools (= 5.5), python3-types-caldav (= 1.3), python3-types-capturer (= 3.0), python3-types-cffi (= 1.16), python3-types-chevron (= 0.14), python3-types-click-default-group (= 1.2), python3-types-click-spinner (= 0.1), python3-types-colorama (= 0.4), python3-types-commonmark (= 0.9), python3-types-console-menu (= 0.8), python3-types-corus (= 0.10), python3-types-croniter (= 5.0.1), python3-types-dateparser (= 1.2), python3-types-decorator (= 5.1), python3-types-defusedxml (= 0.7), python3-types-deprecated (= 1.2.15), python3-types-docker (= 7.1), python3-types-dockerfile-parse (= 2.0), python3-types-docutils (= 0.21), python3-types-editdistance (= 0.8), python3-types-entrypoints (= 0.4), python3-types-exifread (= 3.0), python3-types-fanstatic (= 1.4), python3-types-first (= 2.0), python3-types-flake8 (= 7.1), python3-types-flake8-bugbear (= 24.12.12), python3-types-flake8-builtins (= 2.5), python3-types-flake8-docstrings (= 1.7), python3-types-flake8-rst-docstrings (= 0.3), python3-types-flake8-simplify (= 0.21), python3-types-flake8-typing-imports (= 1.16), python3-types-flask-cors (= 5.0), python3-types-flask-migrate (= 4.0), python3-types-flask-socketio (= 5.4), python3-types-fpdf2 (= 2.8.2), python3-types-gdb (= 15.0), python3-types-gevent (= 24.11), python3-types-google-cloud-ndb (= 2.3), python3-types-greenlet (= 3.1), python3-types-hdbcli (= 2.23), python3-types-html5lib (= 1.1), python3-types-httplib2 (= 0.22), python3-types-humanfriendly (= 10.0), python3-types-hvac (= 2.3), python3-types-ibm-db (= 3.2.4), python3-types-icalendar (= 6.1), python3-types-influxdb-client (= 1.45), python3-types-inifile (= 0.4), python3-types-jack-client (= 0.5), python3-types-jetson-gpio (= 2.1), python3-types-jmespath (= 1.0), python3-types-jsonschema (= 4.23), python3-types-jwcrypto (= 1.5), python3-types-keyboard (= 0.13), python3-types-ldap3 (= 2.9), python3-types-libsass (= 0.23), python3-types-lupa (= 2.2), python3-types-lzstring (= 1.0), python3-types-m3u8 (= 6.0), python3-types-markdown (= 3.7), python3-types-mock (= 5.1), python3-types-mypy-extensions (= 1.0), python3-types-mysqlclient (= 2.2), python3-types-nanoid (= 2.0.0), python3-types-netaddr (= 1.3), python3-types-netifaces (= 0.11), python3-types-networkx (= 3.4.2), python3-types-oauthlib (= 3.2), python3-types-objgraph (= 3.6), python3-types-olefile (= 0.47), python3-types-openpyxl (= 3.1.5), python3-types-opentracing (= 2.4), python3-types-paramiko (= 3.5), python3-types-parsimonious (= 0.10), python3-types-passlib (= 1.7), python3-types-passpy (= 1.0), python3-types-peewee (= 3.17.8), python3-types-pep8-naming (= 0.14), python3-types-pexpect (= 4.9), python3-types-pika (= 1.3), python3-types-polib (= 1.2), python3-types-portpicker (= 1.6), python3-types-protobuf (= 5.29.1), python3-types-psutil (= 6.1), python3-types-psycopg2 (= 2.9.10), python3-types-pyasn1 (= 0.6), python3-types-pyaudio (= 0.2), python3-types-pyautogui (= 0.9), python3-types-pycocotools (= 2.0), python3-types-pycurl (= 7.45.4), python3-types-pyfarmhash (= 0.4), python3-types-pyflakes (= 3.2), python3-types-pygit2 (= 1.15), python3-types-pygments (= 2.18), python3-types-pyinstaller (= 6.11), python3-types-pyjks (= 20.0), python3-types-pymysql (= 1.1), python3-types-pynput (= 1.7.7), python3-types-pyopenssl (= 24.1), python3-types-pyrfc3339 (= 2.0.1), python3-types-pyscreeze (= 1.0.1), python3-types-pyserial (= 3.5), python3-types-pysftp (= 0.2), python3-types-pytest-lazy-fixture (= 0.6), python3-types-python-crontab (= 3.2), python3-types-python-datemath (= 3.0.1), python3-types-python-dateutil (= 2.9), python3-types-python-http-client (= 3.3.7), python3-types-python-jenkins (= 1.8), python3-types-python-jose (= 3.3), python3-types-python-nmap (= 0.7), python3-types-python-xlib (= 0.33), python3-types-pytz (= 2024.2), python3-types-pywin32 (= 308), python3-types-pyxdg (= 0.28), python3-types-pyyaml (= 6.0), python3-types-qrbill (= 1.1), python3-types-qrcode (= 8.0), python3-types-regex (= 2024.11.6), python3-types-reportlab (= 4.2.5), python3-types-requests (= 2.32), python3-types-requests-oauthlib (= 2.0), python3-types-retry (= 0.9), python3-types-rpi-gpio (= 0.7), python3-types-s2clientprotocol (= 5), python3-types-seaborn (= 0.13.2), python3-types-send2trash (= 1.8), python3-types-setuptools (= 75.6), python3-types-shapely (= 2.0), python3-types-simplejson (= 3.19), python3-types-singledispatch (= 4.1), python3-types-six (= 1.17), python3-types-slumber (= 0.7), python3-types-str2bool (= 1.1), python3-types-tabulate (= 0.9), python3-types-tensorflow (= 2.18.0), python3-types-tgcrypto (= 1.2), python3-types-toml (= 0.10), python3-types-toposort (= 1.10), python3-types-tqdm (= 4.67), python3-types-translationstring (= 1.4), python3-types-tree-sitter-languages (= 1.10), python3-types-ttkthemes (= 3.2), python3-types-ujson (= 5.10), python3-types-unidiff (= 0.7), python3-types-untangle (= 1.2), python3-types-usersettings (= 1.1), python3-types-uwsgi (= 2.0), python3-types-vobject (= 0.9.9), python3-types-waitress (= 3.0.1), python3-types-webob (= 1.8), python3-types-whatthepatch (= 1.0), python3-types-workalendar (= 17.0), python3-types-wtforms (= 3.2.1), python3-types-wurlitzer (= 3.1), python3-types-xdgenvpy (= 3.0), python3-types-xmltodict (= 0.14), python3-types-zstd (= 1.5), python3-types-zxcvbn (= 4.4)
Depends: python3:any
Breaks: python3-types-toml, python3-types-typed-ast
Description: collection of library stubs for Python, with static types
 Typeshed contains external type annotations for the Python standard library
 and Python builtins, as well as third party packages as contributed by people
 external to those projects.
 .
 This data can e.g. be used for static analysis, type checking or type
 inference.
Homepage: https://github.com/python/typeshed

Package: python3-typing-extensions
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 515
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Source: python-typing-extensions
Version: 4.13.2-1
Depends: python3:any
Description: Backported and Experimental Type Hints for Python
 The "typing_extensions" module serves two related purposes:
 .
 1. Enable use of new type system features on older Python versions.
 2. Enable experimentation with new type system PEPs before they are accepted
    and added to the "typing" module.
 .
 "typing_extensions" is treated specially by static type checkers such as mypy
 and pyright. Objects defined in "typing_extensions" are treated the same
 way as equivalent forms in "typing".
Homepage: https://typing-extensions.readthedocs.io/en/latest/

Package: python3-tz
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 14
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Source: python-tz
Version: 2025.2-3
Depends: python3-pytz
Description: transitional package to rename python3-tz
 This is a transitional package. It can safely be removed.
Homepage: https://pythonhosted.org/pytz/

Package: python3-uc-micro
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 43
Maintainer: Georges Khaznadar <georgesk@debian.org>
Architecture: all
Source: uc-micro-py
Version: 1.0.3-1
Depends: python3:any
Description: python port of uc.micro
 Micro subset of unicode data files for linkify-it-py projects
 .
 This package was developped for the package python3-linkify-it
Homepage: https://github.com/tsutsu3/uc.micro-py

Package: python3-urllib3
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 471
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Source: python-urllib3
Version: 2.3.0-3+deb13u2
Depends: python3:any
Recommends: ca-certificates
Suggests: python3-brotli, python3-cryptography, python3-idna, python3-openssl, python3-socks
Description: HTTP library with thread-safe connection pooling for Python3
 urllib3 supports features left out of urllib and urllib2 libraries.
 .
   - Re-use the same socket connection for multiple requests (HTTPConnectionPool
     and HTTPSConnectionPool) (with optional client-side certificate
     verification).
   - File posting (encode_multipart_formdata).
   - Built-in redirection and retries (optional).
   - Supports gzip and deflate decoding.
   - Thread-safe and sanity-safe.
   - Small and easy to understand codebase perfect for extending and
     building upon.
Homepage: https://urllib3.readthedocs.org

Package: python3-yaml
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 552
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: pyyaml (6.0.2-1)
Version: 6.0.2-1+b2
Depends: python3 (<< 3.14), python3 (>= 3.13~), python3:any, libc6 (>= 2.14), libyaml-0-2
Description: YAML parser and emitter for Python3
 Python3-yaml is a complete YAML 1.1 parser and emitter for Python3.  It can
 parse all examples from the specification. The parsing algorithm is simple
 enough to be a reference for YAML parser implementors. A simple extension API
 is also provided.  The package is built using libyaml for improved speed.
Homepage: https://github.com/yaml/pyyaml

Package: python3.11
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 651
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: allowed
Version: 3.11.2-6+deb12u9
Depends: python3.11-minimal (= 3.11.2-6+deb12u9), libpython3.11-stdlib (= 3.11.2-6+deb12u9), media-types | mime-support
Recommends: ca-certificates
Suggests: python3.11-venv, python3.11-doc, binutils
Breaks: python3-all (<< 3.6.5~rc1-1), python3-dev (<< 3.6.5~rc1-1), python3-venv (<< 3.6.5-2)
Description: Interactive high-level object-oriented language (version 3.11)
 Python is a high-level, interactive, object-oriented language. Its 3.11 version
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.

Package: python3.11-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 6743
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: python3.11
Version: 3.11.2-6+deb12u9
Depends: libpython3.11-minimal (= 3.11.2-6+deb12u9), libexpat1 (>= 2.1~beta3), zlib1g (>= 1:1.2.0)
Pre-Depends: libc6 (>= 2.35)
Recommends: python3.11
Suggests: binfmt-support
Conflicts: binfmt-support (<< 1.1.2)
Description: Minimal subset of the Python language (version 3.11)
 This package contains the interpreter and some essential modules.  It can
 be used in the boot process for some basic tasks.
 See /usr/share/doc/python3.11-minimal/README.Debian for a list of the modules
 contained in this package.
Cnf-Visible-Pkgname: python3.11

Package: python3.13
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 830
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: allowed
Version: 3.13.5-2+deb13u5
Depends: python3.13-minimal (= 3.13.5-2+deb13u5), libpython3.13-stdlib (= 3.13.5-2+deb13u5), media-types | mime-support, tzdata
Recommends: ca-certificates
Suggests: python3.13-venv, python3.13-doc, binutils
Breaks: python3-all (<< 3.6.5~rc1-1), python3-dev (<< 3.6.5~rc1-1), python3-venv (<< 3.6.5-2)
Description: Interactive high-level object-oriented language (version 3.13)
 Python is a high-level, interactive, object-oriented language. Its 3.13 version
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.

Package: python3.13-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 6768
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: python3.13
Version: 3.13.5-2+deb13u5
Depends: libpython3.13-minimal (= 3.13.5-2+deb13u5), libexpat1 (>= 2.6.0), zlib1g (>= 1:1.2.0)
Pre-Depends: libc6 (>= 2.38)
Recommends: python3.13
Suggests: binfmt-support
Conflicts: binfmt-support (<< 1.1.2)
Description: Minimal subset of the Python language (version 3.13)
 This package contains the interpreter and some essential modules.  It can
 be used in the boot process for some basic tasks.
 See /usr/share/doc/python3.13-minimal/README.Debian for a list of the modules
 contained in this package.
Cnf-Visible-Pkgname: python3.13

Package: qemu-utils
Status: install ok installed
Priority: optional
Section: otherosfs
Installed-Size: 12510
Maintainer: Debian QEMU Team <pkg-qemu-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: qemu
Version: 1:10.0.13+ds-0+deb13u1
Replaces: qemu-system-common (<< 1:8.0+dfsg-5~)
Depends: libaio1t64 (>= 0.3.93), libc6 (>= 2.38), libfuse3-4 (>= 3.17.2), libglib2.0-0t64 (>= 2.78.0), libgmp10 (>= 2:6.3.0+dfsg), libgnutls30t64 (>= 3.8.2), libhogweed6t64, libnettle8t64 (>= 3.9~), libnuma1 (>= 2.0.11), libselinux1 (>= 3.1~), liburing2 (>= 2.3), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4)
Recommends: qemu-block-extra (= 1:10.0.13+ds-0+deb13u1)
Breaks: qemu-system-common (<< 1:8.0+dfsg-5~)
Description: QEMU utilities
 QEMU is a fast processor emulator: currently the package supports Alpha, ARM,
 CRIS, i386, LoongArch, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, RISC-V,
 S390x, SH4, SPARC, x86-64, Xtensa and other emulations. By using dynamic
 translation it achieves reasonable speed while being easy to port on new host
 CPUs.
 .
 This package provides QEMU related utilities:
  * qemu-img: QEMU disk image utility
  * qemu-io:  QEMU disk exerciser
  * qemu-nbd: QEMU disk network block device server
Homepage: http://www.qemu.org/

Package: readline-common
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 89
Maintainer: Matthias Klose <doko@debian.org>
Architecture: all
Multi-Arch: foreign
Source: readline
Version: 8.2-6
Replaces: libreadline-common, libreadline4 (<< 4.3-16), libreadline5 (<< 5.0-11)
Suggests: readline-doc
Conflicts: libreadline-common, libreadline5 (<< 5.0-11)
Description: GNU readline and history libraries, common files
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.
Homepage: https://tiswww.case.edu/php/chet/readline/rltop.html

Package: redis-server
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 178
Maintainer: Chris Lamb <lamby@debian.org>
Architecture: amd64
Source: redis
Version: 5:8.0.2-3+deb13u3
Depends: redis-tools (= 5:8.0.2-3+deb13u3)
Pre-Depends: init-system-helpers (>= 1.54~)
Conffiles:
 /etc/default/redis-server 36255dd86b15accc2acd4db7f5e21f05
 /etc/init.d/redis-server 2a51c7aa28acf5d7244352e80d0b26ff
 /etc/logrotate.d/redis-server 420ce1e139dd2044c4a3e44a2781a0a3
 /etc/redis/redis.conf eea5feff3e1d9db6219d0ee1c826506c
Description: Persistent key-value database with network interface
 Redis is a key-value database in a similar vein to memcache but the dataset
 is non-volatile. Redis additionally provides native support for atomically
 manipulating and querying data structures such as lists and sets.
 .
 The dataset is stored entirely in memory and periodically flushed to disk.
Homepage: https://redis.io/

Package: redis-tools
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 7009
Maintainer: Chris Lamb <lamby@debian.org>
Architecture: amd64
Source: redis
Version: 5:8.0.2-3+deb13u3
Depends: adduser, libatomic1 (>= 4.8), libc6 (>= 2.38), libjemalloc2 (>= 3.5.0), liblzf1 (>= 1.5), libssl3t64 (>= 3.0.0), libstdc++6 (>= 13.1), libsystemd0
Suggests: ruby-redis
Description: Persistent key-value database with network interface (client)
 Redis is a key-value database in a similar vein to memcache but the dataset
 is non-volatile. Redis additionally provides native support for atomically
 manipulating and querying data structures such as lists and sets.
 .
 This package contains the command line client and other tools.
Homepage: https://redis.io/

Package: reportbug
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 191
Maintainer: Reportbug Maintainers <debian-reportbug@lists.debian.org>
Architecture: all
Version: 13.2.0
Depends: apt, python3-reportbug (= 13.2.0), sensible-utils, python3:any
Suggests: claws-mail (>= 3.8.0), debconf, debsums (>= 2.0.47), default-mta | postfix | exim4 | mail-transport-agent, dlocate, emacs-bin-common, file (>> 1.30), gnupg | pgp, python3-urwid, reportbug-gtk (= 13.2.0), xdg-utils
Conffiles:
 /etc/reportbug.conf 705322b9a62d3b68f7edde9beeb31522
Description: reports bugs in the Debian distribution
 reportbug is a tool designed to make the reporting of bugs in Debian
 and derived distributions relatively painless.  Its features include:
 .
  * Integration with many mail user agents.
  * Access to outstanding bug reports to make it easier to identify
    whether problems have already been reported.
  * Automatic checking for newer versions of packages.
  * Optional automatic verification of integrity of packages via debsums.
  * Support for following-up on outstanding reports.
  * Optional PGP/GnuPG integration.
 .
 Bug reporting in Debian relies on email; reportbug can use a local
 mail transport agent (like exim or sendmail), submit directly through
 an external mail server, or pass messages to an installed mail user
 agent (e.g., mutt) for submission.
 .
 This package also includes the "querybts" script for browsing the
 Debian bug tracking system.

Package: rpcsvc-proto
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 246
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.4.3-1
Replaces: libc-dev-bin (<< 2.31-14), libc6-dev (<< 2.31-14)
Depends: libc6 (>= 2.34)
Breaks: libc-dev-bin (<< 2.31-14), libc6-dev (<< 2.31-14)
Description: RPC protocol compiler and definitions
 rpcgen is a tool that generates C code to implement an RPC protocol. The input
 to rpcgen is a language similar to C known as RPC Language (Remote Procedure
 Call Language).
 .
 This package also includes several rpcsvc header files and RPC protocol
 definitions from SunRPC sources that were previously shipped by glibc.
Homepage: https://github.com/thkukuk/rpcsvc-proto

Package: rsync
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 955
Maintainer: Samuel Henrique <samueloph@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 3.5.0+ds1-0+deb13u1
Depends: libacl1 (>= 2.2.23), libc6 (>= 2.38), liblz4-1 (>= 0.0~r130), libpopt0 (>= 1.14), libssl3t64 (>= 3.0.0), libxxhash0 (>= 0.8.0), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4)
Pre-Depends: init-system-helpers (>= 1.54~)
Suggests: openssh-client, openssh-server, python3, python3-braceexpand
Conffiles:
 /etc/default/rsync b8fd9efa75e2bda2583b0d7c0892a073
 /etc/init.d/rsync 59aa13cd1a70ff254a2991ad0c522ea5
Description: fast, versatile, remote (and local) file-copying tool
 rsync is a fast and versatile file-copying tool which can copy locally
 and to/from a remote host. It offers many options to control its behavior,
 and its remote-update protocol can minimize network traffic to make
 transferring updates between machines fast and efficient.
 .
 It is widely used for backups and mirroring and as an improved copy
 command for everyday use.
 .
 This package provides both the rsync command line tool and optional
 daemon functionality.
Homepage: https://rsync.samba.org/

Package: runit-helper
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 21
Maintainer: Lorenzo Puliti <plorenzo@disroot.org>
Architecture: all
Multi-Arch: foreign
Source: dh-runit
Version: 2.16.4
Description: dh-runit implementation detail
 runit-helper provides code, which actually perform actions on system
 users on behalf of dh-runit package. This separation allows packages
 take advantage of improvement or fixes in 'dh-runit' without
 rebuilding.
 .
 This package is implementation detail of 'dh-runit'. It should never
 be installed manually. No assumption about its content can be made.
Homepage: https://salsa.debian.org/debian/dh-runit

Package: screen
Status: install ok installed
Priority: standard
Section: misc
Installed-Size: 1009
Maintainer: Axel Beckert <abe@debian.org>
Architecture: amd64
Version: 4.9.1-3
Depends: libc6 (>= 2.38), libcrypt1 (>= 1:4.1.0), libpam0g (>= 0.99.7.1), libtinfo6 (>= 6), debianutils (>= 5.3-1~)
Suggests: byobu | screenie | iselect (>= 1.4.0-1), ncurses-term
Conffiles:
 /etc/init.d/screen-cleanup 44ec7824f5ef10df73e92ad064331ea0
 /etc/screenrc 12c245238eb8b653625bba27dc81df6a
Description: terminal multiplexer with VT100/ANSI terminal emulation
 GNU Screen is a terminal multiplexer that runs several separate "screens" on
 a single physical character-based terminal. Each virtual terminal emulates a
 DEC VT100 plus several ANSI X3.64 and ISO 2022 functions. Screen sessions
 can be detached and resumed later on a different terminal.
 .
 Screen also supports a whole slew of other features, including configurable
 input and output translation, serial port support, configurable logging,
 and multi-user support.
Homepage: https://savannah.gnu.org/projects/screen

Package: sed
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 991
Maintainer: Clint Adams <clint@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 4.9-2+deb13u1
Pre-Depends: libacl1 (>= 2.2.23), libc6 (>= 2.38), libselinux1 (>= 3.1~)
Description: GNU stream editor for filtering/transforming text
 sed reads the specified files or the standard input if no
 files are specified, makes editing changes according to a
 list of commands, and writes the results to the standard
 output.
Homepage: https://www.gnu.org/software/sed/

Package: sensible-utils
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 63
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.0.25
Description: Utilities for sensible alternative selection
 This package provides a number of small utilities which are used
 by programs to sensibly select and spawn an appropriate browser,
 editor, pager, or terminal emulator.
 .
 The specific utilities included are: sensible-browser sensible-editor
 sensible-pager sensible-terminal

Package: sgml-base
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 65
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.31+nmu1
Suggests: sgml-base-doc
Description: SGML infrastructure and SGML catalog file support
 This package creates the SGML infrastructure directories and provides
 SGML catalog file support in compliance with the current Debian SGML
 Policy draft:
 .
   * infrastructure directories:
      - /etc/sgml
      - /usr/share/sgml/{declaration,dtd,entities,misc,stylesheet}
      - /usr/share/local/sgml/{declaration,dtd,entities,misc,stylesheet}
 .
   * update-catalog(8): tool for maintaining the root SGML catalog
     file and the package SGML catalog files in the '/etc/sgml' directory.

Package: shared-mime-info
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 5143
Maintainer: Debian freedesktop.org maintainers <pkg-freedesktop-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: shared-mime-info (2.4-5)
Version: 2.4-5+b2
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.0), libglib2.0-0t64 (>= 2.76.0), libstdc++6 (>= 12), libxml2 (>= 2.7.4)
Description: FreeDesktop.org shared MIME database and spec
 This is the shared MIME-info database from the X Desktop Group. It is required
 by any program complying to the Shared MIME-Info Database spec, which is also
 included in this package.
 .
 At this time at least ROX, GNOME, KDE and Xfce use this database.
Homepage: https://freedesktop.org/wiki/Software/shared-mime-info

Package: shim-helpers-amd64-signed
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 987
Maintainer: Debian EFI team <debian-efi@lists.debian.org>
Architecture: amd64
Version: 1+16.1+2~deb13u1
Replaces: shim (<< 15+1533136590.3beb971-3~), shim-signed (<< 1.29)
Depends: shim-unsigned (>= 16.1-2~deb13u1)
Breaks: shim-signed (<< 1.29)
Conflicts: shim (<< 15+1533136590.3beb971-3~)
Description: boot loader to chain-load signed boot loaders (signed by Debian)
 This package provides a minimalist boot loader which allows verifying
 signatures of other UEFI binaries against either the Secure Boot DB/DBX or
 against a built-in signature database.  Its purpose is to allow a small,
 infrequently-changing binary to be signed by the UEFI CA, while allowing
 an OS distributor to revision their main bootloader independently of the CA.
 .
 This package contains the MOK manager and fall-back manager signed by the
 Debian UEFI CA to be used by shim-signed.
Built-Using: shim (= 16.1-2~deb13u1)

Package: shim-signed
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1043
Maintainer: Debian EFI Team <debian-efi@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: shim-signed (1.51~1+deb13u1)
Version: 1.51~1+deb13u1+16.1-2~deb13u1
Depends: debconf (>= 0.5) | debconf-2.0, mokutil, shim-signed-common (>= 1.51~1+deb13u1), grub-efi-amd64-bin | systemd-boot, shim-helpers-amd64-signed (>= 1+15.8+1), grub2-common (>= 2.06-6) | systemd-boot
Pre-Depends: debconf
Description: Secure Boot chain-loading bootloader (Microsoft-signed binary)
 This package provides a minimalist boot loader which allows verifying
 signatures of other UEFI binaries against either the Secure Boot DB/DBX or
 against a built-in signature database.  Its purpose is to allow a small,
 infrequently-changing binary to be signed by the UEFI CA, while allowing
 an OS distributor to revision their main bootloader independently of the CA.
 .
 This package contains the version of the bootloader binary signed by the
 Microsoft UEFI CA(s).
Built-Using: shim (= 16.1-2~deb13u1)

Package: shim-signed-common
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 56
Maintainer: Debian EFI Team <debian-efi@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: shim-signed (1.51~1+deb13u1)
Version: 1.51~1+deb13u1+16.1-2~deb13u1
Replaces: shim-signed (<< 1.32+15+1533136590.3beb971-5)
Depends: debconf (>= 0.5) | debconf-2.0, mokutil, openssl, kmod
Breaks: shim-signed (<< 1.32+15+1533136590.3beb971-5)
Description: Secure Boot chain-loading bootloader (common helper scripts)
 This package provides a minimalist boot loader which allows verifying
 signatures of other UEFI binaries against either the Secure Boot DB/DBX or
 against a built-in signature database.  Its purpose is to allow a small,
 infrequently-changing binary to be signed by the UEFI CA, while allowing
 an OS distributor to revision their main bootloader independently of the CA.
 .
 This package contains common helper scripts for all versions of the
 shim-signed package.

Package: shim-unsigned
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1993
Maintainer: Debian EFI team <debian-efi@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: shim
Version: 16.1-2~deb13u1
Replaces: shim (<< 15+1533136590.3beb971-3~)
Conflicts: shim (<< 15+1533136590.3beb971-3~)
Description: boot loader to chain-load signed boot loaders under Secure Boot
 This package provides a minimalist boot loader which allows verifying
 signatures of other UEFI binaries against either the Secure Boot DB/DBX or
 against a built-in signature database.  Its purpose is to allow a small,
 infrequently-changing binary to be signed by the UEFI CA, while allowing
 an OS distributor to revision their main bootloader independently of the CA.

Package: socat
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 1802
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Version: 1.8.0.3-1+deb13u1
Depends: libc6 (>= 2.38), libssl3t64 (>= 3.0.0), libwrap0 (>= 7.6-4~)
Description: multipurpose relay for bidirectional data transfer
 Socat (for SOcket CAT) establishes two bidirectional byte streams
 and transfers data between them. Data channels may be files, pipes,
 devices (terminal or modem, etc.), or sockets (Unix, IPv4, IPv6, raw,
 UDP, TCP, SSL). It provides forking, logging and tracing, different
 modes for interprocess communication and many more options.
 .
 It can be used, for example, as a TCP relay (one-shot or daemon),
 as an external socksifier, as a shell interface to Unix sockets,
 as an IPv6 relay, as a netcat and rinetd replacement, to redirect
 TCP-oriented programs to a serial line, or to establish a relatively
 secure environment (su and chroot) for running client or server shell
 scripts inside network connections. Socat supports sctp as of 1.7.0.
Homepage: https://www.dest-unreach.org/socat/

Package: sqv
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1855
Maintainer: Debian Rust Maintainers <pkg-rust-maintainers@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: foreign
Source: rust-sequoia-sqv (1.3.0-3)
Version: 1.3.0-3+b2
Depends: libc6 (>= 2.38), libgcc-s1 (>= 4.2), libgmp10 (>= 2:6.3.0+dfsg), libhogweed6t64, libnettle8t64 (>= 3.9~)
Description: OpenPGP signature verification program from Sequoia
 sqv is a single-purpose CLI for verifying OpenPGP signatures, designed
 to be used from scripts.
 .
 OpenPGP users looking for the full range of OpenPGP functionality
 will usually prefer sq, the Sequoia PGP project's primary CLI, which
 provides a richer signature verification interface and other
 functionality like certificate management.
Built-Using: rust-buffered-reader (= 1.3.1-2), rust-nettle (= 7.3.0-1), rust-nettle-sys (= 2.3.1-1), rust-sequoia-openpgp (= 2.0.0-2+deb13u1), rust-sequoia-policy-config (= 0.8.0-1), rustc (= 1.85.0+dfsg3-1)
Static-Built-Using: rust-aho-corasick (= 1.1.3-1), rust-anstream (= 0.6.15-1), rust-anstyle (= 1.0.8-1), rust-anstyle-parse (= 0.2.1-1), rust-anstyle-query (= 1.0.0-1), rust-anyhow (= 1.0.95-1), rust-argon2 (= 0.5.3-1), rust-base64 (= 0.22.1-1), rust-base64ct (= 1.6.0-1), rust-bitflags (= 2.8.0-1), rust-blake2 (= 0.10.6-3), rust-block-buffer (= 0.10.4-1), rust-buffered-reader (= 1.3.1-2), rust-cfg-if (= 1.0.0-1), rust-chrono (= 0.4.39-2), rust-clap (= 4.5.23-1), rust-clap-builder (= 4.5.23-1), rust-clap-lex (= 0.7.4-1), rust-colorchoice (= 1.0.0-1), rust-cpufeatures (= 0.2.16-1), rust-crypto-common (= 0.1.6-1), rust-digest (= 0.10.7-2), rust-dyn-clone (= 1.0.16-1), rust-generic-array (= 0.14.7-1), rust-getrandom (= 0.2.15-1), rust-iana-time-zone (= 0.1.63-1), rust-idna (= 1.0.3-2), rust-idna-adapter (= 1.1.0-1), rust-idna-mapping (= 1.0.0-1), rust-lalrpop-util (= 0.20.0-1), rust-lazy-static (= 1.5.0-1), rust-libc (= 0.2.169-1), rust-linux-raw-sys (= 0.4.14-1), rust-memchr (= 2.7.4-1), rust-memsec (= 0.7.0-1), rust-nettle (= 7.3.0-1), rust-nettle-sys (= 2.3.1-1), rust-num-traits (= 0.2.19-2), rust-password-hash (= 0.5.0-1), rust-rand-core (= 0.6.4-2), rust-regex (= 1.11.1-2), rust-regex-automata (= 0.4.9-2), rust-regex-syntax (= 0.8.5-1), rust-rustix (= 0.38.37-4), rust-sequoia-openpgp (= 2.0.0-2+deb13u1), rust-sequoia-policy-config (= 0.8.0-1), rust-serde (= 1.0.217-1), rust-sha1collisiondetection (= 0.3.2-1), rust-smallvec (= 1.13.2-1), rust-strsim-0.10 (= 0.10.0-4), rust-subtle (= 2.6.1-1), rust-terminal-size (= 0.4.1-2), rust-thiserror (= 2.0.11-1), rust-thiserror-1 (= 1.0.69-1), rust-tinyvec (= 1.6.0-2), rust-tinyvec-macros (= 0.1.0-1), rust-toml-0.5 (= 0.5.11-4), rust-typenum (= 1.17.0-3), rust-unicode-bidi (= 0.3.17-1), rust-unicode-joining-type (= 1.0.0-1), rust-unicode-normalization (= 0.1.24-1), rust-utf8-iter (= 1.0.4-1), rust-utf8parse (= 0.2.1-1), rust-xxhash-rust (= 0.8.15-1), rustc (= 1.85.0+dfsg3-1)
Homepage: https://sequoia-pgp.org/

Package: ssh-import-id
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 48
Maintainer: Andrew Starr-Bochicchio <asb@debian.org>
Architecture: all
Version: 5.10-3
Depends: ca-certificates, openssh-client, python3-requests (>= 1.1.0), python3-distro, wget, python3:any
Recommends: openssh-server
Conffiles:
 /etc/ssh/ssh_import_id 8bfa390040fbeeae70bec14f2dccaf11
Description: securely retrieve an SSH public key and install it locally
 This utility will securely contact a public keyserver (Launchpad.net by
 default, but Github.com is also supported), retrieve one or more user's
 public keys, and append these to the current user's ~/.ssh/authorized_keys
 file.
Homepage: https://launchpad.net/ssh-import-id

Package: sshfs
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 122
Maintainer: Bartosz Fenski <fenio@debian.org>
Architecture: amd64
Source: sshfs-fuse
Version: 3.7.3-1.2~deb13u1
Depends: libc6 (>= 2.38), libfuse3-4 (>= 3.17.2), libglib2.0-0t64 (>= 2.24.0), fuse3, openssh-client
Breaks: fuse (<< 3)
Description: filesystem client based on SSH File Transfer Protocol
 sshfs is a filesystem client based on the SSH File Transfer Protocol.
 Since most SSH servers already support this protocol it is very easy
 to set up: i.e. on the server side there's nothing to do.  On the
 client side mounting the filesystem is as easy as logging into the
 server with ssh.
 .
 sshfs is FUSE (Filesystem in USErspace).
Homepage: https://github.com/libfuse/sshfs

Package: ssl-cert
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 61
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.1.3
Depends: debconf (>= 0.5) | debconf-2.0, openssl (>= 0.9.8g-9), adduser
Description: simple debconf wrapper for OpenSSL
 This package enables unattended installs of packages that
 need to create SSL certificates.
 .
 It is a simple wrapper for OpenSSL's certificate request utility that
 feeds it with the correct user variables.

Package: sudo
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 6705
Maintainer: Debian Sudo Maintainers <sudo@packages.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.9.16p2-3+deb13u2
Replaces: sudo-ldap
Depends: libapparmor1 (>= 2.7.0~beta1+bzr1772), libaudit1 (>= 1:2.2.1), libc6 (>= 2.38), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), libssl3t64 (>= 3.0.0), zlib1g (>= 1:1.2.0.2), libpam-modules
Pre-Depends: init-system-helpers (>= 1.54~)
Conflicts: sudo-ldap
Conffiles:
 /etc/init.d/sudo 4fd40c92739a3bb2242df7cc6af126df
 /etc/pam.d/sudo 7fa5090826481c517f23faa1e21c77a8
 /etc/pam.d/sudo-i 95199b1f3d5a60bcf98058d9f8b70e70
 /etc/sudo.conf b802577e70ce0df065aa94feb3d0566f
 /etc/sudo_logsrvd.conf ad0ba586da300ae3ba46312ad744a6e2
 /etc/sudoers da8bee36494c904ba767f0dd58920878
 /etc/sudoers.d/README bb1eba13940f331e91cfb9294d86a04f
Description: Provide limited super user privileges to specific users
 Sudo is a program designed to allow a sysadmin to give limited root
 privileges to users and log root activity.  The basic philosophy is to give
 as few privileges as possible but still allow people to get their work done.
 .
 This version is built with minimal shared library dependencies, use the
 sudo-ldap package instead if you need LDAP support for sudoers.
Homepage: https://www.sudo.ws/

Package: syncthing
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 23034
Maintainer: Debian Go Packaging Team <team+pkg-go@tracker.debian.org>
Architecture: amd64
Version: 1.29.5~ds1-2
Depends: libc6 (>= 2.34), init-system-helpers (>= 1.52)
Recommends: xdg-utils
Conffiles:
 /etc/ufw/applications.d/syncthing 7bc483737df07a71aa8d483ae79dc3d7
Description: decentralized file synchronization
 Syncthing is an application that lets you synchronize your files across
 multiple devices. This means the creation, modification or deletion of files
 on one machine will automatically be replicated to your other devices.
 Syncthing does not upload your data to the cloud but exchanges your data
 across your machines as soon as they are online at the same time.
 .
 This package contains the main binary: syncthing.
Static-Built-Using: go-md2man-v2 (= 2.0.4-1), golang-1.24 (= 1.24.2-2), golang-blackfriday-v2 (= 2.1.0-1), golang-github-alecthomas-kong (= 0.9.0-1), golang-github-audriusbutkevicius-recli (= 0.0.6-2), golang-github-aws-aws-sdk-go (= 1.49.0-2), golang-github-azure-go-ntlmssp (= 0.0~git20220621.cb9428e-1), golang-github-beorn7-perks (= 1.0.1-3), golang-github-calmh-incontainer (= 0.0~git20221224.b3e71b1-2), golang-github-calmh-xdr (= 2.0.1-8), golang-github-ccding-go-stun (= 0.1.3-1), golang-github-cenkalti-backoff (= 4.3.0-1), golang-github-cespare-xxhash (= 2.3.0-1), golang-github-chmduquesne-rollinghash (= 4.0.0-2), golang-github-go-ldap-ldap (= 3.4.9-1), golang-github-gobwas-glob (= 0.2.3+git20181002.e7a84e9-1), golang-github-gofrs-flock (= 0.8.1-1), golang-github-golang-snappy (= 0.0.2-3), golang-github-google-uuid (= 1.6.0-1), golang-github-greatroar-blobloom (= 0.7.1-1), golang-github-hashicorp-errwrap (= 1.1.0-1), golang-github-hashicorp-go-multierror (= 1.1.1-2), golang-github-hashicorp-golang-lru-v2 (= 2.0.7-2), golang-github-jackpal-gateway (= 1.0.7-1), golang-github-jackpal-go-nat-pmp (= 1.0.2-3), golang-github-jmespath-go-jmespath (= 0.4.0-2), golang-github-julienschmidt-httprouter (= 1.3.0-2), golang-github-kballard-go-shellquote (= 0.0~git20180428.95032a8-2), golang-github-klauspost-compress (= 1.18.0+ds1-1), golang-github-lucas-clemente-quic-go (= 0.50.1-1), golang-github-maxmind-geoipupdate (= 6.1.0-2), golang-github-miscreant-miscreant.go (= 0.0~git20200214.26d3763-3), golang-github-munnerz-goautoneg (= 0.0~git20191010.a7dc8b6-2), golang-github-oschwald-geoip2-golang (= 1.4.0-1), golang-github-oschwald-maxminddb-golang (= 1.12.0-1), golang-github-pierrec-lz4 (= 4.1.18-1), golang-github-pkg-errors (= 0.9.1-3), golang-github-posener-complete (= 1.2.3-2), golang-github-prometheus-client-golang (= 1.21.1-1), golang-github-prometheus-client-model (= 0.6.0-1), golang-github-prometheus-common (= 0.62.0-3), golang-github-prometheus-procfs (= 0.15.1-1), golang-github-puzpuzpuz-xsync (= 3.5.0-3), golang-github-rabbitmq-amqp091-go (= 1.10.0-1), golang-github-rcrowley-go-metrics (= 0.0~git20180125.8732c61-3), golang-github-riywo-loginshell (= 0.0~git20190610.2ed199a-3), golang-github-shirou-gopsutil (= 4.25.2-1), golang-github-syncthing-notify (= 0.0~git20210616.c6b7342-2), golang-github-thejerf-suture (= 4.0.1-1), golang-github-tklauser-go-sysconf (= 0.3.11-1), golang-github-tklauser-numcpus (= 0.3.0-2), golang-github-urfave-cli (= 1.22.14-1), golang-github-vitrun-qart (= 0.1-5), golang-github-willabides-kongplete (= 0.4.0-2), golang-go.crypto (= 1:0.25.0-1), golang-golang-x-exp (= 0.0~git20231006.7918f67-2), golang-golang-x-net (= 1:0.27.0-1), golang-golang-x-sync (= 0.7.0-1), golang-golang-x-sys (= 0.22.0-1), golang-golang-x-text (= 0.22.0-1), golang-golang-x-time (= 0.5.0-1), golang-goleveldb (= 0.0~git20200815.5c35d60-2), golang-google-protobuf (= 1.36.5-1), golang-gopkg-asn1-ber.v1 (= 1.5.4-1), golang-uber-automaxprocs (= 1.5.3-1)
Homepage: https://www.syncthing.net/

Package: systemd
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 9944
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 257.13-1~deb13u1
Provides: systemd-sysusers (= 257.13-1~deb13u1), systemd-tmpfiles (= 257.13-1~deb13u1)
Depends: libacl1 (>= 2.2.23), libapparmor1 (>= 2.13), libc6 (>= 2.41), libmount1 (>= 2.30), libpam0g (>= 0.99.7.1), libseccomp2 (>= 2.3.1), libselinux1 (>= 3.1~), libssl3t64 (>= 3.4.0), libsystemd0 (= 257.13-1~deb13u1), mount
Pre-Depends: libc6 (>= 2.38), libsystemd-shared (= 257.13-1~deb13u1)
Recommends: default-dbus-system-bus | dbus-system-bus, linux-sysctl-defaults, systemd-timesyncd | time-daemon, systemd-cryptsetup
Suggests: systemd-container, systemd-homed, systemd-userdbd, systemd-boot, systemd-resolved, systemd-repart, libtss2-tcti-device0, polkitd
Breaks: dracut-core (<< 102-2~), less (<< 563), sicherboot (<< 0.1.6)
Conflicts: consolekit, libpam-ck-connector, opensysusers (<< 0.7.3-4.1~), systemd-shim
Conffiles:
 /etc/security/limits.d/10-coredump-debian.conf bb509d1c69a68c82ecdcd22c9b1c7d04
 /etc/systemd/journald.conf 226f112ac6367d270670e2c2dd9471d7
 /etc/systemd/logind.conf 2f26319b0e390d5ddd383d04ced8ea00
 /etc/systemd/networkd.conf c8ffe444e15b1f9e8be31e54a6eaf800
 /etc/systemd/pstore.conf 8086c035fbf3bde72f2339a6ee50d2a4
 /etc/systemd/sleep.conf 894f85ddfb666958fad7b7217b7f48c2
 /etc/systemd/system.conf 9c032a82b936a8513e74296bf491a538
 /etc/systemd/user.conf c13845a7cbc3e115e4c23949a3e2b917
Description: system and service manager
 systemd is a system and service manager for Linux. It provides aggressive
 parallelization capabilities, uses socket and D-Bus activation for starting
 services, offers on-demand starting of daemons, keeps track of processes using
 Linux control groups, maintains mount and automount points and implements an
 elaborate transactional dependency-based service control logic.
 .
 Installing the systemd package will not switch your init system unless you
 boot with init=/lib/systemd/systemd or install systemd-sysv in addition.
Homepage: https://systemd.io

Package: systemd-cryptsetup
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 498
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: systemd
Version: 257.13-1~deb13u1
Depends: libc6 (>= 2.38), libcryptsetup12 (>= 2:2.7), libssl3t64 (>= 3.0.0), libsystemd-shared (= 257.13-1~deb13u1)
Conflicts: systemd (<< 256-2~)
Description: Provides cryptsetup, integritysetup and veritysetup utilities
 Utilities and units that integrated cryptsetup/integritysetup/veritysetup
 support in systemd.
Homepage: https://systemd.io

Package: systemd-resolved
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 916
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: systemd
Version: 257.13-1~deb13u1
Replaces: resolvconf
Provides: resolvconf
Depends: libc6 (>= 2.39), libssl3t64 (>= 3.0.0), libsystemd-shared (= 257.13-1~deb13u1), systemd (= 257.13-1~deb13u1), default-dbus-system-bus | dbus-system-bus
Recommends: libnss-myhostname, libnss-resolve, libidn2-0
Suggests: polkitd
Conflicts: resolvconf, systemd (<< 257.4-4~)
Conffiles:
 /etc/systemd/resolved.conf c056212e9cddc090a567d691d727502d
Description: systemd DNS resolver
 This package provides systemd's DNS resolver and the command line tool to
 manage it.
 .
 Installing this package automatically overwrites /etc/resolv.conf and switches
 it to be managed by systemd-resolved.
Homepage: https://systemd.io

Package: systemd-sysv
Protected: yes
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 97
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: systemd
Version: 257.13-1~deb13u1
Replaces: sysvinit-core
Depends: systemd (= 257.13-1~deb13u1)
Pre-Depends: systemd
Recommends: libpam-systemd, libnss-systemd
Conflicts: bfh-container (<< 20211009-22~), file-rc, initscripts, insserv, molly-guard (<< 0.8.2~), orphan-sysvinit-scripts, progress-linux-container (<< 20221002-11~), startpar, systemd-shim, sysv-rc, sysvinit-core
Description: system and service manager - SysV compatibility symlinks
 This package provides manual pages and compatibility symlinks needed for
 systemd to replace sysvinit.
 .
 Installing systemd-sysv will overwrite /sbin/init with a symlink to systemd.
Homepage: https://systemd.io

Package: systemd-timesyncd
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 203
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: systemd
Version: 257.13-1~deb13u1
Replaces: time-daemon
Provides: time-daemon
Depends: libc6 (>= 2.34), libsystemd-shared (= 257.13-1~deb13u1), systemd
Conflicts: systemd (<< 256.2-2~), time-daemon
Conffiles:
 /etc/dhcp/dhclient-exit-hooks.d/timesyncd 1f941d2a11991ff151fe74064f2b5cf4
 /etc/systemd/timesyncd.conf bd00db81a9f876df90e9d5c94b9ca2e7
Description: minimalistic service to synchronize local time with NTP servers
 The package contains the systemd-timesyncd system service that may be used to
 synchronize the local system clock with a remote Network Time Protocol server.
Homepage: https://systemd.io

Package: sysvinit-utils
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 104
Maintainer: Debian sysvinit maintainers <debian-init-diversity@chiark.greenend.org.uk>
Architecture: amd64
Multi-Arch: foreign
Source: sysvinit
Version: 3.14-4
Replaces: lsb-base
Provides: lsb-base (= 11.1.0)
Depends: libc6 (>= 2.38)
Conflicts: lsb-base (<< 11.3~)
Description: System-V-like utilities
 This package contains the important System-V-like utilities.
 .
 Specifically, this package includes:
 init-d-script, fstab-decode, killall5, pidof
 .
 It also contains the library scripts sourced by init-d-script and other
 initscripts that were formerly in lsb-base.
Homepage: https://github.com/slicer69/sysvinit

Package: tar
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 3085
Maintainer: Janos Lenart <ocsi@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.35+dfsg-3.1
Replaces: cpio (<< 2.4.2-39)
Pre-Depends: libacl1 (>= 2.2.23), libc6 (>= 2.38), libselinux1 (>= 3.1~)
Suggests: bzip2, ncompress, xz-utils, tar-scripts, tar-doc
Breaks: dpkg-dev (<< 1.14.26)
Conflicts: cpio (<= 2.4.2-38)
Description: GNU version of the tar archiving utility
 Tar is a program for packaging a set of files as a single archive in tar
 format.  The function it performs is conceptually similar to cpio, and to
 things like PKZIP in the DOS world.  It is heavily used by the Debian package
 management system, and is useful for performing system backups and exchanging
 sets of files with others.
Homepage: https://www.gnu.org/software/tar/

Package: tcpdump
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 1343
Maintainer: Debian Security Tools <team+pkg-security@tracker.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 4.99.5-2
Replaces: apparmor-profiles-extra (<< 1.12~)
Depends: adduser, libc6 (>= 2.38), libpcap0.8t64 (>= 1.9.1), libssl3t64 (>= 3.0.0)
Suggests: apparmor (>= 2.3)
Breaks: apparmor-profiles-extra (<< 1.12~)
Conffiles:
 /etc/apparmor.d/usr.bin.tcpdump 88089d95eec8c04e0a827f3d1309d30a
Description: command-line network traffic analyzer
 This program allows you to dump the traffic on a network. tcpdump
 is able to examine IPv4, ICMPv4, IPv6, ICMPv6, UDP, TCP, SNMP, AFS
 BGP, RIP, PIM, DVMRP, IGMP, SMB, OSPF, NFS and many other packet
 types.
 .
 It can be used to print out the headers of packets on a network
 interface, filter packets that match a certain expression. You can
 use this tool to track down network problems, to detect attacks
 or to monitor network activities.
Homepage: https://www.tcpdump.org/

Package: tmux
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1209
Maintainer: Sebastien Delafond <seb@debian.org>
Architecture: amd64
Version: 3.5a-3
Depends: libc6 (>= 2.38), libevent-core-2.1-7t64 (>= 2.1.8-stable), libjemalloc2 (>= 2.1.1), libsystemd0 (>= 221), libtinfo6 (>= 6.5)
Description: terminal multiplexer
 tmux enables a number of terminals (or windows) to be accessed and
 controlled from a single terminal like screen. tmux runs as a
 server-client system. A server is created automatically when necessary
 and holds a number of sessions, each of which may have a number of
 windows linked to it. Any number of clients may connect to a session,
 or the server may be controlled by issuing commands with tmux.
 Communication takes place through a socket, by default placed in /tmp.
 Moreover tmux provides a consistent and well-documented command
 interface, with the same syntax whether used interactively, as a key
 binding, or from the shell. It offers a choice of vim or Emacs key
 layouts.
Homepage: https://github.com/tmux/tmux/wiki

Package: traceroute
Status: install ok installed
Priority: important
Section: net
Installed-Size: 160
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Version: 1:2.1.6-1
Depends: libc6 (>= 2.38)
Description: Traces the route taken by packets over an IPv4/IPv6 network
 The traceroute utility displays the route used by IP packets on their way to a
 specified network (or Internet) host. Traceroute displays the IP number and
 host name (if possible) of the machines along the route taken by the packets.
 Traceroute is used as a network debugging tool. If you're having network
 connectivity problems, traceroute will show you where the trouble is coming
 from along the route.
 .
 Install traceroute if you need a tool for diagnosing network connectivity
 problems.
Homepage: https://traceroute.sourceforge.net/

Package: ttf-mscorefonts-installer
Status: install ok installed
Priority: optional
Section: contrib/fonts
Installed-Size: 85
Maintainer: Thijs Kinkhorst <thijs@debian.org>
Architecture: all
Multi-Arch: foreign
Source: msttcorefonts
Version: 3.8.1
Provides: msttcorefonts
Depends: wget, ca-certificates, cabextract, xfonts-utils, debconf (>= 0.5) | debconf-2.0
Recommends: fonts-liberation
Description: Installer for Microsoft TrueType core fonts
 This package allows for easy installation of the Microsoft True Type
 Core Fonts for the Web including:
 .
   Andale Mono
   Arial Black
   Arial (Bold, Italic, Bold Italic)
   Comic Sans MS (Bold)
   Courier New (Bold, Italic, Bold Italic)
   Georgia (Bold, Italic, Bold Italic)
   Impact
   Times New Roman (Bold, Italic, Bold Italic)
   Trebuchet (Bold, Italic, Bold Italic)
   Verdana (Bold, Italic, Bold Italic)
   Webdings
 .
 You will need an Internet connection to download these fonts if you
 don't already have them.
 .
 NOTE: the package fonts-liberation contains free variants of the Times,
 Arial and Courier fonts. It's better to use those instead unless you
 specifically need one of the other fonts from this package.

Package: tzdata
Status: install ok installed
Priority: required
Section: localization
Installed-Size: 1358
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2026c-0+deb13u1
Replaces: tzdata-legacy (= 2023c-8), tzdata-legacy (= 2023c-9)
Provides: tzdata-trixie
Depends: debconf (>= 0.5) | debconf-2.0
Breaks: tzdata-legacy (= 2023c-8), tzdata-legacy (= 2023c-9)
Description: time zone and daylight-saving time data
 This package contains data required for the implementation of
 standard local time for many representative locations around the
 globe. It is updated periodically to reflect changes made by
 political bodies to time zone boundaries, UTC offsets, and
 daylight-saving rules.
Homepage: https://www.iana.org/time-zones

Package: ucf
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 148
Maintainer: Mark Hindley <leepen@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 3.0052
Depends: debconf (>= 0.5) | debconf-2.0, libtext-wrapi18n-perl, procps, sensible-utils
Conffiles:
 /etc/ucf.conf 80d388cee26f58a54338acfd8e708c7e
Description: Update Configuration File(s): preserve user changes to config files
 Debian policy mandates that user changes to configuration files must be
 preserved during package upgrades. The easy way to achieve this behavior
 is to make the configuration file a 'conffile', in which case dpkg
 handles the file specially during upgrades, prompting the user as
 needed.
 .
 This is appropriate only if it is possible to distribute a default
 version that will work for most installations, although some system
 administrators may choose to modify it. This implies that the
 default version will be part of the package distribution, and must
 not be modified by the maintainer scripts during installation (or at
 any other time).
 .
 This script attempts to provide conffile-like handling for files that
 may not be labelled conffiles, and are not shipped in a Debian package,
 but handled by the postinst instead. This script allows one to
 maintain files in /etc, preserving user changes and in general
 offering the same facilities while upgrading that dpkg normally
 provides for 'conffiles'.
 .
 Additionally, this script provides facilities for transitioning a
 file that had not been provided with conffile-like protection to come
 under this schema, and attempts to minimize questions asked at
 installation time. Indeed, the transitioning facility is better than the
 one offered by dpkg while transitioning a file from a non-conffile to
 conffile status.

Package: udev
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 10236
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: systemd
Version: 257.13-1~deb13u1
Replaces: systemd (<< 255~rc1-4~)
Depends: libblkid1 (>= 2.37.2), libc6 (>= 2.38), libsystemd-shared (= 257.13-1~deb13u1), systemd | systemd-standalone-sysusers | systemd-sysusers, libkmod2, libudev1 (= 257.13-1~deb13u1)
Breaks: systemd (<< 257.13-1~deb13u1)
Conflicts: systemd (<< 255~rc1-4~)
Conffiles:
 /etc/udev/iocost.conf fad2a2c4c34d796b6802bc62c19cc4ae
 /etc/udev/udev.conf bf60be80a4cc51271a1618edf5a6d66f
Description: /dev/ and hotplug management daemon
 udev is a daemon which dynamically creates and removes device nodes from
 /dev/, handles hotplug events and loads drivers at boot time.
Homepage: https://systemd.io

Package: unattended-upgrades
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 317
Maintainer: Michael Vogt <mvo@debian.org>
Architecture: all
Version: 2.12
Depends: debconf (>= 0.5) | debconf-2.0, debconf, python3, python3-apt (>= 1.9.6~), python3-dbus, python3-distro-info, ucf, lsb-release, lsb-base, xz-utils
Recommends: systemd-sysv | cron | cron-daemon | anacron
Suggests: bsd-mailx, default-mta | mail-transport-agent, needrestart, powermgmt-base, python3-gi
Conffiles:
 /etc/init.d/unattended-upgrades 290829a5efc55b7c435de0bb769f217b
 /etc/kernel/postinst.d/unattended-upgrades 21f0ac567d9738d1a017fc16e0150a35
 /etc/logrotate.d/unattended-upgrades e45049ee847f069a99e3e6ec39155d4a
 /etc/pm/sleep.d/10_unattended-upgrades-hibernate 0f5d54aa2dd322c805c90e409fc2724a
 /etc/update-motd.d/92-unattended-upgrades afa7546d3fe561e1f5783f7b9cf72096
Description: automatic installation of security upgrades
 This package can download and install security upgrades automatically
 and unattended, taking care to only install packages from the
 configured APT source, and checking for dpkg prompts about
 configuration file changes.
 .
 This script is the backend for the APT::Periodic::Unattended-Upgrade
 option.

Package: unzip
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 387
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 6.0-29+deb13u1
Depends: libbz2-1.0, libc6 (>= 2.34)
Suggests: zip
Description: De-archiver for .zip files
 InfoZIP's unzip program. With the exception of multi-volume archives
 (ie, .ZIP files that are split across several disks using PKZIP's /& option),
 this can handle any file produced either by PKZIP, or the corresponding
 InfoZIP zip program.
 .
 This version supports encryption.
Homepage: https://infozip.sourceforge.net/UnZip.html

Package: usr-is-merged
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 16
Maintainer: Marco d'Itri <md@linux.it>
Architecture: all
Multi-Arch: foreign
Source: usrmerge
Version: 39+nmu2
Breaks: cruft-ng (<< 0.4.4~), initramfs-tools (<< 0.121~)
Conflicts: acl (<< 2.2.52-3~), arptables (<< 0.0.4+snapshot20181021-1~), coreutils (<< 8.24-1~), cruft (<< 0.9.44~), cryptsetup (<< 2:1.7.0-1~), davfs2 (<< 1.5.2-1.2~), debianutils (<< 4.5~), dhcpcd (<< 1:5~), ebtables (<< 2.0.10.4+snapshot20181205-1~), elvis-tiny (<< 1.4-24~), kbd (<< 2.0.4-4~), ksh (<< 93u+20120801-3.1~), less (<< 481-2~), libbrlapi-dev (<< 5.3.1-1~), libc0.1 (<< 2.35-4), libc0.3 (<< 2.35-4), libc6 (<< 2.35-4), libc6.1 (<< 2.35-4), libdm0-dev, libjson-c-dev (<< 0.12.1-1.1~), libparted1.8-10 (<< 1.8.8.git.2008.03.24-11.2~), libpng12-0 (<< 1.2.54-6~), libusb-0.1-4 (<< 2:0.1.12-28~), lustre-utils (<< 1.8.5+dfsg-3.2~), mksh (<< 52b-1~), molly-guard (<< 0.7.1+exp1~), musl-dev (<< 1.1.9-1.1~), nano (<< 2.3.99pre3-1~), open-iscsi (<< 2.0.873+git0.3b4b4500-13~), open-vm-tools (<< 2:10.0.5-3227872-2~), policycoreutils (<< 2.4-4~), safe-rm (<< 0.12-6~), tcsh (<< 6.18.01-4~), vsearch (<< 1.9.5-2~), xfsdump (<< 3.1.6+nmu1~), xfslibs-dev (<< 4.9.0+nmu1~), yp-tools (<< 3.3-5~), zsh (<< 5.2-4~)
Description: Transitional package to assert a merged-/usr system
 This package can be successfully installed only on merged-/usr systems.
 .
 It can be safely removed once no other package depends on it anymore.
Homepage: https://wiki.debian.org/UsrMerge

Package: util-linux
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 4986
Maintainer: Chris Hofstaedtler <zeha@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.41.5-0+deb13u1
Replaces: hardlink
Provides: hardlink
Pre-Depends: libpam-modules, libpam-runtime, libblkid1 (= 2.41.5-0+deb13u1), libc6 (>= 2.41), libcap-ng0 (>= 0.7.9), libcrypt1 (>= 1:4.1.0), liblastlog2-2 (= 2.41.5-0+deb13u1), libmount1 (= 2.41.5-0+deb13u1), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), libsmartcols1 (= 2.41.5-0+deb13u1), libsystemd0, libtinfo6 (>= 6), libudev1 (>= 183), libuuid1 (= 2.41.5-0+deb13u1)
Recommends: sensible-utils
Suggests: dosfstools, kbd, util-linux-extra, util-linux-locales, wtmpdb
Conflicts: hardlink
Conffiles:
 /etc/pam.d/runuser b8b44b045259525e0fae9e38fdb2aeeb
 /etc/pam.d/runuser-l 2106ea05877e8913f34b2c77fa02be45
 /etc/pam.d/su 60fbbe65c90d741bc0d380543cefe8af
 /etc/pam.d/su-l 756fef5687fecc0d986e5951427b0c4f
Description: miscellaneous system utilities
 This package contains a number of important utilities, most of which
 are oriented towards maintenance of your system. Some of the more
 important utilities included in this package allow you to view kernel
 messages, create new filesystems, view block device information,
 interface with real time clock, etc.
Homepage: https://github.com/util-linux/util-linux

Package: util-linux-extra
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 1402
Maintainer: Chris Hofstaedtler <zeha@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.41.5-0+deb13u1
Replaces: util-linux (<< 2.40.4-4~)
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.38), libsmartcols1 (= 2.41.5-0+deb13u1), zlib1g (>= 1:1.1.4)
Breaks: initscripts (<< 3.08-2~), util-linux (<< 2.40.4-4~)
Conffiles:
 /etc/init.d/hwclock.sh c06bc68c12cbdd9c7f60ba25ee587efe obsolete
 /etc/default/hwclock 02f94aaf57aff4e2e6751ec7b877a997 obsolete
Description: interactive login tools
 Tools commonly found on systems where humans login interactively,
 or are needed with non-standard system configurations.
Homepage: https://github.com/util-linux/util-linux

Package: uuid-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 134
Maintainer: Chris Hofstaedtler <zeha@debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.41.5-0+deb13u1
Depends: libc6-dev | libc-dev, libuuid1 (= 2.41.5-0+deb13u1)
Description: Universally Unique ID library - headers and static libraries
 The libuuid library generates and parses 128-bit Universally Unique IDs
 (UUIDs). See RFC 4122 for more information.
 .
 This package contains the development environment for the uuid library.
Homepage: https://github.com/util-linux/util-linux

Package: uuid-runtime
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 218
Maintainer: Chris Hofstaedtler <zeha@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.41.5-0+deb13u1
Depends: adduser, systemd | systemd-standalone-sysusers | systemd-sysusers, libc6 (>= 2.38), libsmartcols1 (= 2.41.5-0+deb13u1), libsystemd0, libuuid1 (= 2.41.5-0+deb13u1)
Pre-Depends: libuuid1, init-system-helpers (>= 1.54~)
Conffiles:
 /etc/init.d/uuidd 72734842b2a488f116230d6686e84767
Description: runtime components for the Universally Unique ID library
 The libuuid library generates and parses 128-bit Universally Unique
 IDs (UUIDs). A UUID is an identifier that is unique within the space
 of all such identifiers across both space and time. It can be used for
 multiple purposes, from tagging objects with an extremely short lifetime
 to reliably identifying very persistent objects across a network.
 .
 See RFC 4122 for more information.
 .
 This package contains the uuidgen program and the uuidd daemon.
 .
 The uuidd daemon is used to generate UUIDs, especially time-based
 UUIDs, in a secure and guaranteed-unique fashion, even in the face of
 large numbers of threads trying to grab UUIDs running on different CPUs.
 It is used by libuuid as well as the uuidgen program.
Homepage: https://github.com/util-linux/util-linux

Package: va-driver-all
Status: install ok installed
Priority: optional
Section: video
Installed-Size: 24
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libva
Version: 2.22.0-3
Depends: i965-va-driver | i965-va-driver-shaders, intel-media-va-driver | intel-media-va-driver-non-free, mesa-va-drivers
Description: Video Acceleration (VA) API -- driver metapackage
 This package depends on the full suite of drivers for the Video Acceleration
 API (VA API). It does not provide any drivers itself, and may be removed if
 you wish to only have certain drivers installed.
Homepage: https://github.com/intel/libva

Package: vdpau-driver-all
Status: install ok installed
Priority: optional
Section: video
Installed-Size: 15
Maintainer: Debian NVIDIA Maintainers <pkg-nvidia-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libvdpau (1.5-3)
Version: 1.5-3+b1
Depends: libvdpau-va-gl1, mesa-vdpau-drivers
Suggests: nvidia-vdpau-driver, nvidia-tesla-440-vdpau-driver, nvidia-tesla-418-vdpau-driver, nvidia-legacy-390xx-vdpau-driver, nvidia-legacy-340xx-vdpau-driver, vdpau-driver
Description: Video Decode and Presentation API for Unix (driver metapackage)
 VDPAU (Video Decode and Presentation API for Unix) is an open source
 library (libvdpau) and API designed by NVIDIA originally for its GeForce
 8 series and later GPU hardware, targeted at the X Window System on Unix
 operating-systems (including Linux, FreeBSD, and Solaris). This VDPAU API
 allows video programs to offload portions of the video decoding process
 and video post-processing to the GPU video-hardware.
 .
 This package depends on the full suite of drivers for the VDPAU API.
 It does not provide any drivers itself, and may be removed if you wish to
 only have certain drivers installed.
Homepage: https://www.freedesktop.org/wiki/Software/VDPAU/

Package: vim
Status: install ok installed
Priority: optional
Section: editors
Installed-Size: 3930
Maintainer: Debian Vim Maintainers <team+vim@tracker.debian.org>
Architecture: amd64
Version: 2:9.1.1230-2
Provides: editor
Depends: vim-common (= 2:9.1.1230-2), vim-runtime (= 2:9.1.1230-2), libacl1 (>= 2.2.23), libc6 (>= 2.38), libgpm2 (>= 1.20.7), libselinux1 (>= 3.1~), libsodium23 (>= 1.0.14), libtinfo6 (>= 6)
Suggests: ctags, vim-doc, vim-scripts
Description: Vi IMproved - enhanced vi editor
 Vim is an almost compatible version of the UNIX editor Vi.
 .
 Many new features have been added: multi level undo, syntax
 highlighting, command line history, on-line help, filename
 completion, block operations, folding, Unicode support, etc.
 .
 This package contains a version of vim compiled with a rather
 standard set of features.  This package does not provide a GUI
 version of Vim.  See the other vim-* packages if you need more
 (or less).
Homepage: https://www.vim.org/

Package: vim-common
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 1864
Maintainer: Debian Vim Maintainers <team+vim@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Source: vim
Version: 2:9.1.1230-2
Replaces: vim-runtime (<< 2:9.0.1658-1~)
Recommends: xxd, vim | vim-gtk3 | vim-motif | vim-nox | vim-tiny
Breaks: vim-runtime (<< 2:9.0.1658-1~)
Conffiles:
 /etc/vim/vimrc 268a4e1ec0b630f6b75c83f618229c88
Description: Vi IMproved - Common files
 Vim is an almost compatible version of the UNIX editor Vi.
 .
 This package contains files shared by all non GUI-enabled vim variants
 available in Debian.  Examples of such shared files are: manpages and
 configuration files.
Homepage: https://www.vim.org/

Package: vim-runtime
Status: install ok installed
Priority: optional
Section: editors
Installed-Size: 38417
Maintainer: Debian Vim Maintainers <team+vim@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Source: vim
Version: 2:9.1.1230-2
Recommends: vim | vim-gtk3 | vim-motif | vim-nox | vim-tiny
Breaks: vim-tiny (<< 2:9.1.1230-2)
Enhances: vim-tiny
Description: Vi IMproved - Runtime files
 Vim is an almost compatible version of the UNIX editor Vi.
 .
 This package contains vimtutor and the architecture independent runtime
 files, used, if available, by all vim variants available in Debian.
 Example of such runtime files are: online documentation, rules for
 language-specific syntax highlighting and indentation, color schemes,
 and standard plugins.
Homepage: https://www.vim.org/

Package: vim-tiny
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 1831
Maintainer: Debian Vim Maintainers <team+vim@tracker.debian.org>
Architecture: amd64
Source: vim
Version: 2:9.1.1230-2
Provides: editor
Depends: vim-common (= 2:9.1.1230-2), libacl1 (>= 2.2.23), libc6 (>= 2.34), libselinux1 (>= 3.1~), libtinfo6 (>= 6)
Suggests: indent
Conffiles:
 /etc/vim/vimrc.tiny 2eef1685cce57398be3763940dbced84
Description: Vi IMproved - enhanced vi editor - compact version
 Vim is an almost compatible version of the UNIX editor Vi.
 .
 This package contains a minimal version of Vim compiled with no GUI and
 a small subset of features. This package's sole purpose is to provide
 the vi binary for base installations.
 .
 If a vim binary is wanted, try one of the following more featureful
 packages: vim, vim-nox, vim-motif, or vim-gtk3.
Homepage: https://www.vim.org/

Package: wget
Status: install ok installed
Priority: standard
Section: web
Installed-Size: 3784
Maintainer: Noël Köthe <noel@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.25.0-2
Depends: libc6 (>= 2.38), libgnutls30t64 (>= 3.8.1), libidn2-0 (>= 0.6), libnettle8t64, libpcre2-8-0 (>= 10.22), libpsl5t64 (>= 0.16.0), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Conflicts: wget-ssl
Conffiles:
 /etc/wgetrc c43064699caf6109f4b3da0405c06ebb
Description: retrieves files from the web
 Wget is a network utility to retrieve files from the web
 using HTTP(S) and FTP, the two most widely used internet
 protocols. It works non-interactively, so it will work in
 the background, after having logged off. The program supports
 recursive retrieval of web-authoring pages as well as FTP
 sites -- you can use Wget to make mirrors of archives and
 home pages or to travel the web like a WWW robot.
 .
 Wget works particularly well with slow or unstable connections
 by continuing to retrieve a document until the document is fully
 downloaded. Re-getting files from where it left off works on
 servers (both HTTP and FTP) that support it. Both HTTP and FTP
 retrievals can be time stamped, so Wget can see if the remote
 file has changed since the last retrieval and automatically
 retrieve the new version if it has.
 .
 Wget supports proxy servers; this can lighten the network load,
 speed up retrieval, and provide access behind firewalls.
Homepage: https://www.gnu.org/software/wget/

Package: whiptail
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 61
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: newt
Version: 0.52.25-1
Depends: libc6 (>= 2.38), libnewt0.52 (>= 0.52.25), libpopt0 (>= 1.14), libslang2 (>= 2.2.4)
Description: Displays user-friendly dialog boxes from shell scripts
 Whiptail is a "dialog" replacement using newt instead of ncurses. It
 provides a method of displaying several different types of dialog boxes
 from shell scripts. This allows a developer of a script to interact with
 the user in a much friendlier manner.
Homepage: https://pagure.io/newt

Package: whois
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 388
Maintainer: Marco d'Itri <md@linux.it>
Architecture: amd64
Version: 5.6.3
Depends: libc6 (>= 2.38), libcrypt1 (>= 1:4.1.0), libidn2-0 (>= 0.6)
Description: intelligent WHOIS client
 This package provides a commandline client for the WHOIS (RFC 3912)
 protocol, which queries online servers for information such as contact
 details for domains and IP address assignments.
 It can intelligently select the appropriate WHOIS server for most queries.
 .
 The package also contains mkpasswd, a features-rich front end to the
 password encryption function crypt(3).

Package: x11-common
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 275
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: xorg
Version: 1:7.7+24+deb13u1
Depends: lsb-base
Conffiles:
 /etc/X11/Xreset 05d188ccac2f3360af8fe0c216640233
 /etc/X11/Xreset.d/README b344c222b5daf81926fd3270df374b5f
 /etc/X11/Xresources/x11-common b640adb1cd646ec097f8df5b6deca9f0
 /etc/X11/Xsession 9383a93bc2172001d9b9f46de7dd2256
 /etc/X11/Xsession.d/20x11-common_process-args 6a713578b550facd68a3d9b7be9ddcc7
 /etc/X11/Xsession.d/30x11-common_xresources 61cebe25ee0c64e981b88958dfee6f9c
 /etc/X11/Xsession.d/35x11-common_xhost-local 3080616d080574d7b06c2b2a20af53dd
 /etc/X11/Xsession.d/40x11-common_xsessionrc db544c8543d1cb3762b9859288e77040
 /etc/X11/Xsession.d/50x11-common_determine-startup b4570043736ae7f22947067b6d28ab8d
 /etc/X11/Xsession.d/90x11-common_ssh-agent 71116d351e6eab4ecce9b84229a4ece0
 /etc/X11/Xsession.d/99x11-common_start 3874d5e8f3ec888f69adb126e223e168
 /etc/X11/Xsession.options 210cd520efa87a5197cac01e10b3a84a
 /etc/X11/rgb.txt 09ee098b83d94c7c046d6b55ebe84ae1
 /etc/init.d/x11-common b121acab13ded0fb7e9bc90ad55c9a43
Description: X Window System (X.Org) infrastructure
 x11-common contains the filesystem infrastructure required for further
 installation of the X Window System in any configuration; it does not
 provide a full installation of clients, servers, libraries, and utilities
 required to run the X Window System.
 .
 A number of terms are used to refer to the X Window System, including "X",
 "X Version 11", "X11", "X11R6", and "X11R7".  The version of X used in
 Debian is derived from the version released by the X.Org Foundation, and
 is thus often also referred to as "X.Org".  All of the preceding quoted
 terms are functionally interchangeable in an Debian system.
Homepage: https://www.x.org/

Package: x11-utils
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 651
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 7.7+7
Depends: libc6 (>= 2.38), libfontconfig1 (>= 2.12.6), libgl1, libx11-6, libx11-xcb1 (>= 2:1.8.7), libxaw7 (>= 2:1.0.14), libxcb-shape0, libxcb1 (>= 1.6), libxcomposite1 (>= 1:0.4.5), libxext6, libxft2 (>> 2.1.1), libxi6, libxinerama1 (>= 2:1.1.4), libxkbfile1 (>= 1:1.1.0), libxmu6 (>= 2:1.1.3), libxmuu1 (>= 2:1.1.3), libxrandr2 (>= 2:1.2.0), libxrender1, libxt6t64 (>= 1:1.1.0), libxtst6, libxv1, libxxf86dga1 (>= 2:1.1.5), libxxf86vm1
Recommends: luit
Suggests: mesa-utils
Conffiles:
 /etc/X11/app-defaults/Editres 6d5a5a799a78c744bc39ae05d723c5fc
 /etc/X11/app-defaults/Editres-color 5ec5d0e8c953faaa06af647650f30ce6
 /etc/X11/app-defaults/Viewres 4f77da598593ff07cda9d2d147a07772
 /etc/X11/app-defaults/Viewres-color ff9c397a80443790a97b909050f63282
 /etc/X11/app-defaults/XFontSel ce8235ba771b4092905451264fec68a4
 /etc/X11/app-defaults/Xfd a8b4d28d2ad895e40cfb6fb9c69eeecd
 /etc/X11/app-defaults/Xmessage eed84b35dde8b18e7dcfc80e75c1da67
 /etc/X11/app-defaults/Xmessage-color ca383db9e4e9648bda0952ad6b8a2115
Description: X11 utilities
 An X client is a program that interfaces with an X server (almost always via
 the X libraries), and thus with some input and output hardware like a
 graphics card, monitor, keyboard, and pointing device (such as a mouse).
 .
 This package provides a miscellaneous assortment of X utilities
 that ship with the X Window System, including:
  - appres, editres, listres and viewres, which query the X resource database;
  - xdpyinfo, a display information utility for X;
  - xdriinfo, query configuration information of DRI drivers;
  - xev, an X event displayer;
  - xfd, a tool that displays all the glyphs in a given X font;
  - xfontsel, a tool for browsing and selecting X fonts;
  - xkill, a tool for terminating misbehaving X clients;
  - xlsatoms, which lists interned atoms defined on an X server;
  - xlsclients, which lists client applications running on an X display;
  - xlsfonts, a server font list displayer;
  - xmessage, a tool to display message or dialog boxes;
  - xprop, a property displayer for X;
  - xvinfo, an Xv extension information utility for X;
  - xwininfo, a window information utility for X;
 .
 The editres and viewres programs use bitmap images provided by the
 xbitmaps package.

Package: x11-xserver-utils
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 559
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 7.7+11
Depends: libc6 (>= 2.38), libice6 (>= 1:1.0.0), libx11-6, libxaw7 (>= 2:1.0.16), libxcursor1 (>> 1.1.2), libxext6, libxi6, libxmu6 (>= 2:1.1.3), libxmuu1 (>= 2:1.1.3), libxrandr2 (>= 2:1.5.0), libxt6t64, libxxf86vm1, cpp
Suggests: nickle, cairo-5c, xorg-docs-core
Conffiles:
 /etc/X11/app-defaults/Xvidtune 0493a0782b498e9f0dee51a4013a80e6
Description: X server utilities
 An X client is a program that interfaces with an X server (almost always via
 the X libraries), and thus with some input and output hardware like a
 graphics card, monitor, keyboard, and pointing device (such as a mouse).
 .
 This package provides a miscellaneous assortment of X Server utilities
 that ship with the X Window System, including:
  - iceauth, a tool for manipulating ICE protocol authorization records;
  - rgb;
  - sessreg, a simple program for managing utmp/wtmp entries;
  - xcmsdb, a device color characteristic utility for the X Color Management
    System;
  - xgamma, a tool for querying and setting a monitor's gamma correction;
  - xhost, a very dangerous program that you should never use;
  - xmodmap, a utility for modifying keymaps and pointer button mappings in X;
  - xrandr, a command-line interface to the RandR extension;
  - xrdb, a tool to manage the X server resource database;
  - xrefresh, a tool that forces a redraw of the X screen;
  - xset, a tool for setting miscellaneous X server parameters;
  - xsetmode and xsetpointer, tools for handling X Input devices;
  - xsetroot, a tool for tailoring the appearance of the root window;
  - xstdcmap, a utility to selectively define standard colormap properties;
  - xvidtune, a tool for customizing X server modelines for your monitor.

Package: x11proto-dev
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 1704
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: xorgproto
Version: 2024.1-1
Replaces: x11proto-core-dev (<< 2018.3), x11proto-dri2-dev (<< 2018.3), x11proto-fonts-dev (<< 2018.3), x11proto-gl-dev (<< 2018.3), x11proto-input-dev (<< 2018.3), x11proto-kb-dev (<< 2018.3), x11proto-present-dev (<< 2018.3), x11proto-randr-dev (<< 2018.3), x11proto-record-dev (<< 2018.3), x11proto-render-dev (<< 2:2018.3), x11proto-scrnsaver-dev (<< 2018.3), x11proto-video-dev (<< 2018.3), x11proto-xext-dev (<< 2018.3), x11proto-xf86dga-dev (<< 2018.3), x11proto-xf86dri-dev (<< 2018.3), x11proto-xf86vidmode-dev (<< 2018.3), x11proto-xinerama-dev (<< 2018.3)
Provides: x11proto-core-dev (= 2024.1-1), x11proto-dri2-dev (= 2024.1-1), x11proto-fonts-dev (= 2024.1-1), x11proto-gl-dev (= 2024.1-1), x11proto-input-dev (= 2024.1-1), x11proto-kb-dev (= 2024.1-1), x11proto-present-dev (= 2024.1-1), x11proto-randr-dev (= 2024.1-1), x11proto-record-dev (= 2024.1-1), x11proto-render-dev (= 2024.1-1), x11proto-scrnsaver-dev (= 2024.1-1), x11proto-video-dev (= 2024.1-1), x11proto-xext-dev (= 2024.1-1), x11proto-xf86dga-dev (= 2024.1-1), x11proto-xf86dri-dev (= 2024.1-1), x11proto-xf86vidmode-dev (= 2024.1-1), x11proto-xinerama-dev (= 2024.1-1)
Depends: xorg-sgml-doctools (>= 1:1.5)
Breaks: x11proto-core-dev (<< 2018.3), x11proto-dri2-dev (<< 2018.3), x11proto-fonts-dev (<< 2018.3), x11proto-gl-dev (<< 2018.3), x11proto-input-dev (<< 2018.3), x11proto-kb-dev (<< 2018.3), x11proto-present-dev (<< 2018.3), x11proto-randr-dev (<< 2018.3), x11proto-record-dev (<< 2018.3), x11proto-render-dev (<< 2:2018.3), x11proto-scrnsaver-dev (<< 2018.3), x11proto-video-dev (<< 2018.3), x11proto-xext-dev (<< 2018.3), x11proto-xf86dga-dev (<< 2018.3), x11proto-xf86dri-dev (<< 2018.3), x11proto-xf86vidmode-dev (<< 2018.3), x11proto-xinerama-dev (<< 2018.3)
Description: X11 extension protocols and auxiliary headers
 This package provides development headers describing the wire protocol
 for the X11 core and extension protocols, and also provides a number of
 utility headers, used to abstract OS-specific functions.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This package is built from the X.org xorgproto module.
Homepage: https://www.x.org/

Package: xdg-user-dirs
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 375
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 0.18-2
Depends: libc6 (>= 2.34)
Conffiles:
 /etc/xdg/autostart/xdg-user-dirs.desktop 19075979fa4ac105aa08763bd68e9589
 /etc/xdg/user-dirs.conf 602a95ec7fe4068512bebb712c41102d
 /etc/xdg/user-dirs.defaults b8595963fe74aeb65e854ba9da7f1acb
Description: tool to manage well known user directories
 xdg-user-dirs is a tool to help manage "well known" user directories
 like the desktop folder and the music folder. It also handles
 localization (i.e. translation) of the filenames.
 .
 The way it works is that xdg-user-dirs-update is run very early in the
 login phase. This program reads a configuration file, and a set of
 default directories. It then creates localized versions of these
 directories in the users home directory and sets up a config file in
 $(XDG_CONFIG_HOME)/user-dirs.dirs (XDG_CONFIG_HOME defaults to
 ~/.config) that applications can read to find these directories.
Homepage: https://www.freedesktop.org/wiki/Software/xdg-user-dirs

Package: xdg-utils
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 348
Maintainer: Debian freedesktop.org maintainers <pkg-freedesktop-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.2.1-2
Recommends: libfile-mimeinfo-perl, libnet-dbus-perl, libx11-protocol-perl, x11-utils, x11-xserver-utils
Description: desktop integration utilities from freedesktop.org
 xdg-utils contains utilities for integrating applications with the
 desktop environment, regardless of which desktop environment is used.
 .
 The following utilities are included:
 .
  * xdg-desktop-menu - Install desktop menu items
  * xdg-desktop-icon - Install icons on the user's desktop
  * xdg-email - Compose a new email in the user's preferred email client,
    potentially with subject and other info filled in
  * xdg-icon-resource - Install icon resources
  * xdg-mime - Query and install MIME types and associations
  * xdg-open - Open a URI in the user's preferred application that
    handles the respective URI or file type
  * xdg-screensaver - Enable, disable, or suspend the screensaver
  * xdg-settings - Get or set the default web browser and URI handlers
Homepage: https://www.freedesktop.org/wiki/Software/xdg-utils/

Package: xfonts-encodings
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 667
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1:1.0.4-2.2
Replaces: xfonts-base (<< 1:1.0.0)
Depends: x11-common
Description: Encodings for X.Org fonts
 This package contains the encodings that map to specific characters.

Package: xfonts-utils
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 429
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1:7.7+7
Depends: libc6 (>= 2.38), libfontenc1 (>= 1:1.1.8), libfreetype6 (>= 2.6), zlib1g (>= 1:1.1.4), x11-common, xfonts-encodings
Description: X Window System font utility programs
 xfonts-utils provides a set of utility programs shipped with the X Window
 System that are needed for font management.
 .
 The programs in this package include:
  - bdftopcf, which converts BDF fonts to PCF fonts;
  - bdftruncate and ucs2any, tools to generate fonts with various encodings
    from ISO 10646-encoded fonts
  - mkfontdir, a program to generate fonts.dir files;
  - mkfontscale, a program to generate fonts.scale files;
  - fonttosfnt, a program to wrap bitmap fonts in a sfnt (TrueType) wrapper.

Package: xkb-data
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 6911
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: xkeyboard-config
Version: 2.42-1
Breaks: x11-xkb-utils (<< 7.7+5)
Description: X Keyboard Extension (XKB) configuration data
 This package contains configuration data used by the X Keyboard
 Extension (XKB), which allows selection of keyboard layouts when
 using a graphical interface.
 .
 Every X11 vendor provides its own XKB data files, so keyboard layout
 designers have to send their layouts to several places.  The
 xkeyboard-config project has been launched at FreeDesktop in order
 to provide a central repository that could be used by all vendors.
Homepage: https://www.freedesktop.org/Software/XKeyboardConfig

Package: xml-core
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 114
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.19
Depends: sed (>= 4.1.2-8), sgml-base (>= 1.28)
Suggests: debhelper (>= 9.20120909)
Conffiles:
 /etc/sgml/xml-core.cat 055ba0bd3154c0a58b9bf8a0c9ecf2fa
Description: XML infrastructure and XML catalog file support
 This package creates the XML infrastructure directories and provides
 XML catalog file support in compliance with the current Debian XML
 Policy draft:
 .
   * infrastructure directories:
      - /etc/xml
      - /usr/share/xml/{declaration,entities,misc,schema}
      - /usr/local/share/xml/{declaration,entities,misc,schema}
 .
   * XML catalog schema: OASIS XML Catalog Committee Specification 1.0
 .
   * update-xmlcatalog(8): tool for maintaining the root XML catalog
     file and the package XML catalog files in the '/etc/xml' directory
     as well as local XML catalog files.
 .
   * dh_installxmlcatalogs(1): debhelper tool for installing local XML
     catalog files and registering XML entities in package XML catalog
     files and the root XML catalog file (requires debhelper package)

Package: xorg-sgml-doctools
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 89
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1:1.11-1.1
Description: Common tools for building X.Org SGML documentation
 This package contains tools for building the X.Org SGML documentation.
 Currently it only includes various entity definitions for the current
 release.

Package: xtrans-dev
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 330
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: xtrans
Version: 1.4.0-1
Description: X transport library (development files)
 xtrans includes a number of routines to make X implementations
 transport-independent; at time of writing, it includes support for UNIX
 sockets, IPv4, IPv6, and DECnet.
 .
 xtrans is not actually a library in itself; it includes .c files which are
 then used in the compilation of X servers, libraries, et al.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 https://cgit.freedesktop.org/xorg/lib/libxtrans/

Package: xz-utils
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 1424
Maintainer: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Architecture: amd64
Multi-Arch: foreign
Version: 5.8.1-1+deb13u2
Replaces: lzip (<< 1.8~rc2), manpages-de (<< 4.17.0-2~bpo11+1), manpages-fr (<< 4.17.0-2~bpo11+1), xz-lzma
Provides: lzma
Depends: libc6 (>= 2.34), liblzma5 (>= 5.6.2)
Breaks: lzip (<< 1.8~rc2), manpages-de (<< 4.17.0-2~bpo11+1), manpages-fr (<< 4.17.0-2~bpo11+1), pristine-tar (<< 1.50+nmu1)
Conflicts: lzma (<< 9.22-1), xz-lzma
Description: XZ-format compression utilities
 XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
 compression format, which provides memory-hungry but powerful
 compression (often better than bzip2) and fast, easy decompression.
 .
 This package provides the command line tools for working with XZ
 compression, including xz, unxz, xzcat, xzgrep, and so on. They can
 also handle the older LZMA format, and if invoked via appropriate
 symlinks will emulate the behavior of the commands in the lzma
 package.
 .
 The XZ format is similar to the older LZMA format but includes some
 improvements for general use:
 .
  * 'file' magic for detecting XZ files;
  * crc64 data integrity check;
  * limited random-access reading support;
  * improved support for multithreading (not used in xz-utils);
  * support for flushing the encoder.
Homepage: https://tukaani.org/xz/

Package: zfs-dkms
Status: install ok installed
Priority: optional
Section: contrib/kernel
Installed-Size: 18660
Maintainer: Debian ZFS on Linux maintainers <pkg-zfsonlinux-devel@alioth-lists.debian.net>
Architecture: all
Multi-Arch: foreign
Source: zfs-linux
Version: 2.3.9-0+deb13u1
Replaces: spl-dkms
Provides: zfs-modules
Depends: dkms (>= 3.0.11), file, libc6-dev | libc-dev, lsb-release, libpython3-stdlib, debconf (>= 0.5) | debconf-2.0
Recommends: zfs-zed, zfsutils-linux (>= 2.3.9-0+deb13u1), linux-libc-dev (<< 7.3~), linux-libc-dev (>= 4.18~)
Suggests: debhelper
Breaks: spl-dkms (<< 0.8.0~rc1), zfs-fuse (<< 2.3.9-0+deb13u1)
Description: OpenZFS filesystem kernel modules for Linux
 OpenZFS is a storage platform that encompasses the functionality of
 traditional filesystems and volume managers. It supports data checksums,
 compression, encryption, snapshots, and more.
 .
 This DKMS package includes the SPA, DMU, ZVOL, and ZPL components of
 OpenZFS.
Homepage: https://zfsonlinux.org/

Package: zfs-zed
Status: install ok installed
Priority: optional
Section: contrib/admin
Installed-Size: 285
Maintainer: Debian ZFS on Linux maintainers <pkg-zfsonlinux-devel@alioth-lists.debian.net>
Architecture: amd64
Source: zfs-linux
Version: 2.3.9-0+deb13u1
Depends: zfs-modules | zfs-dkms, zfsutils-linux (>= 2.3.9-0+deb13u1), libc6 (>= 2.38), libnvpair3linux (>= 0.8.2), libudev1 (>= 183), libuuid1 (>= 2.16), libuutil3linux (>= 0.8.2), libzfs6linux (>= 2.2.3)
Pre-Depends: init-system-helpers (>= 1.54~)
Conffiles:
 /etc/init.d/zfs-zed 6f50e7131314fe7244893a41913be998
 /etc/zfs/zed.d/zed-functions.sh 7600be4c2d6c5ea107572de025ff4277
 /etc/zfs/zed.d/zed.rc 2770f05aafad7f672154b981df10373d
Description: OpenZFS Event Daemon
 OpenZFS is a storage platform that encompasses the functionality of
 traditional filesystems and volume managers. It supports data checksums,
 compression, encryption, snapshots, and more.
 .
 ZED (ZFS Event Daemon) monitors events generated by the ZFS kernel
 module. When a zevent (ZFS Event) is posted, ZED will run any ZEDLETs
 (ZFS Event Daemon Linkage for Executable Tasks) that have been enabled
 for the corresponding zevent class.
 .
 This package provides the OpenZFS Event Daemon (zed).
Homepage: https://zfsonlinux.org/

Package: zfsutils-linux
Status: install ok installed
Priority: optional
Section: contrib/admin
Installed-Size: 1891
Maintainer: Debian ZFS on Linux maintainers <pkg-zfsonlinux-devel@alioth-lists.debian.net>
Architecture: amd64
Source: zfs-linux
Version: 2.3.9-0+deb13u1
Replaces: spl (<< 0.7.9-2), spl-dkms
Provides: zfsutils
Depends: libnvpair3linux (= 2.3.9-0+deb13u1), libuutil3linux (= 2.3.9-0+deb13u1), libzfs6linux (= 2.3.9-0+deb13u1), libzpool6linux (= 2.3.9-0+deb13u1), python3, libblkid1 (>= 2.16), libc6 (>= 2.38), libssl3t64 (>= 3.0.0), libudev1 (>= 183), libuuid1 (>= 2.16)
Pre-Depends: init-system-helpers (>= 1.54~)
Recommends: zfs-modules | zfs-dkms, zfs-zed
Suggests: nfs-kernel-server, samba-common-bin (>= 3.0.23), zfs-initramfs | zfs-dracut
Breaks: spl (<< 0.7.9-2), spl-dkms (<< 0.8.0~rc1), zfs-dkms (>> 2.3.9-0+deb13u1...), zfs-dkms (<< 2.3.9-0+deb13u1)
Conflicts: nordugrid-arc-client, zfs, zfs-fuse
Conffiles:
 /etc/cron.d/zfsutils-linux 988b0007fc4d08bb239f7857d7403c87
 /etc/default/zfs c331d379511e423297a088c6060b3db4
 /etc/init.d/zfs-import 24a9fcb38c802596af45889c5478a80a
 /etc/init.d/zfs-load-key 3c4ac504cb55d13fcee88a75e10e76b5
 /etc/init.d/zfs-mount 9604b1722a5202c2be1ccb5c1d11343b
 /etc/init.d/zfs-share f2e9778a29eb0a1ae47509fe54b9cb69
 /etc/sudoers.d/zfs ad829cd4055ab2a8d41f8b5f2b564a3f
 /etc/zfs/zfs-functions bf938c60155f390b37cc2ef9d076ec33
Description: command-line tools to manage OpenZFS filesystems
 OpenZFS is a storage platform that encompasses the functionality of
 traditional filesystems and volume managers. It supports data checksums,
 compression, encryption, snapshots, and more.
 .
 This package provides the zfs and zpool commands to create and administer
 OpenZFS filesystems.
Homepage: https://zfsonlinux.org/

Package: zipcmp
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 52
Maintainer: Debian Libzip Maintainers <libzip@tracker.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: libzip
Version: 1.11.3-2
Depends: libc6 (>= 2.34), libzip5 (>= 1.0), zlib1g (>= 1:1.1.4)
Description: compare contents of zip archives
 zipcmp compares two zip archives and checks if they contain the same files,
 comparing their names, uncompressed sizes, and CRCs. File order and compressed
 size differences are ignored.
Homepage: https://libzip.org

Package: zipmerge
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 36
Maintainer: Debian Libzip Maintainers <libzip@tracker.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: libzip
Version: 1.11.3-2
Depends: libc6 (>= 2.34), libzip5 (>= 1.11.1)
Description: merge zip archives
 zipmerge merges a source zip archives into a target zip archive.
 By default, files in the source zip archives overwrite existing files of the
 same name in the target zip archive.
Homepage: https://libzip.org

Package: ziptool
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 62
Maintainer: Debian Libzip Maintainers <libzip@tracker.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: libzip
Version: 1.11.3-2
Depends: libc6 (>= 2.34), libzip5 (>= 1.11.1)
Description: modify zip archives
 ziptool is a utility for working with zip archives.  It can modify
 details of zip archives according to the commands given, including
 timestamps and other metadata about the included files.
Homepage: https://libzip.org

Package: zlib1g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 173
Maintainer: Mark Brown <broonie@debian.org>
Architecture: amd64
Multi-Arch: same
Source: zlib (1:1.3.dfsg+really1.3.1-1)
Version: 1:1.3.dfsg+really1.3.1-1+b1
Provides: libz1
Depends: libc6 (>= 2.14)
Breaks: libxml2 (<< 2.7.6.dfsg-2), texlive-binaries (<< 2023.20230311.66589-8)
Conflicts: zlib1 (<= 1:1.0.4-7)
Description: compression library - runtime
 zlib is a library implementing the deflate compression method found
 in gzip and PKZIP.  This package includes the shared library.
Homepage: http://zlib.net/

Package: zlib1g-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1317
Maintainer: Mark Brown <broonie@debian.org>
Architecture: amd64
Multi-Arch: same
Source: zlib (1:1.3.dfsg+really1.3.1-1)
Version: 1:1.3.dfsg+really1.3.1-1+b1
Provides: libz-dev
Depends: zlib1g (= 1:1.3.dfsg+really1.3.1-1+b1), libc6-dev | libc-dev
Conflicts: zlib1-dev
Description: compression library - development
 zlib is a library implementing the deflate compression method found
 in gzip and PKZIP.  This package includes the development support
 files.
Homepage: http://zlib.net/

Package: zstd
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 2320
Maintainer: RPM packaging team <team+pkg-rpm@tracker.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: libzstd
Version: 1.5.7+dfsg-1
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), liblz4-1 (>= 1.8.0), liblzma5 (>= 5.1.1alpha+20120614), libstdc++6 (>= 14), zlib1g (>= 1:1.1.4)
Description: fast lossless compression algorithm -- CLI tool
 Zstd, short for Zstandard, is a fast lossless compression algorithm, targeting
 real-time compression scenarios at zlib-level compression ratio.
 .
 This package contains the CLI program implementing zstd.
Homepage: https://github.com/facebook/zstd

Package: zutty
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 507
Maintainer: Ricardo Mones <mones@debian.org>
Architecture: amd64
Version: 0.16.2.20241020+dfsg1-1
Provides: x-terminal-emulator
Depends: libc6 (>= 2.34), libegl1, libfreetype6 (>= 2.2.1), libgcc-s1 (>= 3.0), libgles2 (>= 1.0.0), libstdc++6 (>= 13.1), libx11-6, libxmu6 (>= 2:1.1.3)
Suggests: fonts-anonymous-pro | fonts-dejavu-mono | fonts-firacode | fonts-freefont-ttf | fonts-hack | fonts-inconsolata | fonts-jetbrains-mono | fonts-liberation
Description: Efficient full-featured X11 terminal emulator
 Zutty is a terminal emulator for the X Window System, functionally
 similar to several other X terminal emulators such as xterm, rxvt and
 others. It is also similar to other, much more modern, GPU-accelerated
 terminal emulators.
 .
 Zutty uses a radically simple, yet extremely efficient rendering
 implementation, coupled with a sufficiently complete feature set to
 make it useful for a wide range of users. It also offers high
 throughput with low latency, and strives to conform to relevant
 standards, either published or de-facto.
 .
 Notice this program requires your GPU OpenGL to support compute,
 fragment and vertex shaders, otherwise it will fail to start.
Homepage: https://tomscii.sig7.se/zutty/

./new-debian13/var/log/cloud-init-output.log

Cloud-init v. 22.4.2 running 'init-local' at Sun, 07 Dec 2025 15:40:24 +0000. Up 4.00 seconds.
Cloud-init v. 22.4.2 running 'init' at Sun, 07 Dec 2025 15:40:40 +0000. Up 19.23 seconds.
ci-info: ++++++++++++++++++++++++++++++++++++++Net device info+++++++++++++++++++++++++++++++++++++++
ci-info: +--------+------+-----------------------------+---------------+--------+-------------------+
ci-info: | Device |  Up  |           Address           |      Mask     | Scope  |     Hw-Address    |
ci-info: +--------+------+-----------------------------+---------------+--------+-------------------+
ci-info: |  eth0  | True |        109.199.123.73       | 255.255.240.0 | global | 00:50:56:5e:95:7b |
ci-info: |  eth0  | True |  2a02:c207:2293:6396::1/64  |       .       | global | 00:50:56:5e:95:7b |
ci-info: |  eth0  | True | fe80::250:56ff:fe5e:957b/64 |       .       |  link  | 00:50:56:5e:95:7b |
ci-info: |   lo   | True |          127.0.0.1          |   255.0.0.0   |  host  |         .         |
ci-info: |   lo   | True |           ::1/128           |       .       |  host  |         .         |
ci-info: +--------+------+-----------------------------+---------------+--------+-------------------+
ci-info: +++++++++++++++++++++++++++++++Route IPv4 info+++++++++++++++++++++++++++++++
ci-info: +-------+---------------+---------------+---------------+-----------+-------+
ci-info: | Route |  Destination  |    Gateway    |    Genmask    | Interface | Flags |
ci-info: +-------+---------------+---------------+---------------+-----------+-------+
ci-info: |   0   |    0.0.0.0    | 109.199.112.1 |    0.0.0.0    |    eth0   |   UG  |
ci-info: |   1   | 109.199.112.0 |    0.0.0.0    | 255.255.240.0 |    eth0   |   U   |
ci-info: +-------+---------------+---------------+---------------+-----------+-------+
ci-info: +++++++++++++++++++++++++Route IPv6 info++++++++++++++++++++++++++
ci-info: +-------+--------------------------+---------+-----------+-------+
ci-info: | Route |       Destination        | Gateway | Interface | Flags |
ci-info: +-------+--------------------------+---------+-----------+-------+
ci-info: |   0   | 2a02:c207:2293:6396::/64 |    ::   |    eth0   |   U   |
ci-info: |   1   |        fe80::/64         |    ::   |    eth0   |   U   |
ci-info: |   2   |           ::/0           | fe80::1 |    eth0   |   UG  |
ci-info: |   4   |          local           |    ::   |    eth0   |   U   |
ci-info: |   5   |          local           |    ::   |    eth0   |   U   |
ci-info: |   6   |        multicast         |    ::   |    eth0   |   U   |
ci-info: +-------+--------------------------+---------+-----------+-------+
PermitRootLogin yes
# the setting of "PermitRootLogin prohibit-password".
2025-12-07 15:40:40,559 - util.py[WARNING]: Failed to run bootcmd module bootcmd
2025-12-07 15:40:40,561 - util.py[WARNING]: Running module bootcmd (<module 'cloudinit.config.cc_bootcmd' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_bootcmd.py'>) failed
2025-12-07 15:40:40,658 - ug_util.py[WARNING]: DEPRECATED: 'user' of type string is deprecated and will be removed in a future release. Use 'users' list instead.
2025-12-07 15:40:41,544 - ug_util.py[WARNING]: DEPRECATED: 'user' of type string is deprecated and will be removed in a future release. Use 'users' list instead.
Generating public/private rsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_rsa_key
Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
The key fingerprint is:
SHA256:LpWXtv9S1HLugRH2mUuc31oaPfGMHx3Q5zXGWlJUM5w root@vmi2936396
The key's randomart image is:
+---[RSA 3072]----+
|              *=+|
|             = E=|
|            . XoB|
|         . . ooX+|
|        S +  .+BO|
|       o o . .+=X|
|      . . .  . B+|
|       .   .. o o|
|            .o.  |
+----[SHA256]-----+
Generating public/private dsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_dsa_key
Your public key has been saved in /etc/ssh/ssh_host_dsa_key.pub
The key fingerprint is:
SHA256:A8fTqvN51ZrOQRLWSqKjOQuGZ94YdqSyrJFip+Cmn5U root@vmi2936396
The key's randomart image is:
+---[DSA 1024]----+
|                 |
|       . . .     |
|      . = = .    |
|       + * o     |
|    . o S o ..   |
| o o + o . o. .  |
|B.O.E o    ..o   |
|*@oO o o ...o.   |
|B== o   o. .o    |
+----[SHA256]-----+
Generating public/private ecdsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key
Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub
The key fingerprint is:
SHA256:v6gPenodV1lnBBl6uzbnD7TDlZknGQWBYSuClrDZmDA root@vmi2936396
The key's randomart image is:
+---[ECDSA 256]---+
|  E .       oo=Bo|
|   o B o   ..oo.o|
|    = = . . oooo |
|     .   . .o. ++|
|        S  .  =+o|
|        ...  o =.|
|      .. o.   O .|
|     .o... . . * |
|    o+.oo .     +|
+----[SHA256]-----+
Generating public/private ed25519 key pair.
Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
The key fingerprint is:
SHA256:0UTQPWoqXIZvNo9xAdHHwCNcEi5SIOz0OgTML19NtzY root@vmi2936396
The key's randomart image is:
+--[ED25519 256]--+
|o.. ....=X=+     |
|.oo. . o+== =    |
| +... +.+oo+ .   |
| .o..o.ooE+      |
| .o... +So..     |
|  o.  o B .      |
|   .   + *       |
|        . .      |
|                 |
+----[SHA256]-----+
Cloud-init v. 22.4.2 running 'modules:config' at Sun, 07 Dec 2025 15:40:42 +0000. Up 20.84 seconds.
2025-12-07 15:40:42,076 - ug_util.py[WARNING]: DEPRECATED: 'user' of type string is deprecated and will be removed in a future release. Use 'users' list instead.
Cloud-init v. 22.4.2 running 'modules:final' at Sun, 07 Dec 2025 15:40:42 +0000. Up 21.65 seconds.
Get:1 file:/etc/apt/mirrors/debian.list Mirrorlist [30 B]
Get:2 file:/etc/apt/mirrors/debian-security.list Mirrorlist [39 B]
Get:3 https://deb.debian.org/debian bookworm InRelease [151 kB]
Get:4 https://deb.debian.org/debian bookworm-updates InRelease [55.4 kB]
Get:5 https://deb.debian.org/debian bookworm-backports InRelease [59.4 kB]
Get:6 https://deb.debian.org/debian-security bookworm-security InRelease [48.0 kB]
Get:7 https://deb.debian.org/debian bookworm/main Sources [9494 kB]
Get:8 https://deb.debian.org/debian bookworm/main amd64 Packages [8791 kB]
Get:9 https://deb.debian.org/debian bookworm/main Translation-en [6109 kB]
Get:10 https://deb.debian.org/debian bookworm-updates/main Sources [3288 B]
Get:11 https://deb.debian.org/debian bookworm-updates/main amd64 Packages [6924 B]
Get:12 https://deb.debian.org/debian bookworm-updates/main Translation-en [5448 B]
Get:13 https://deb.debian.org/debian bookworm-backports/main Sources [290 kB]
Get:14 https://deb.debian.org/debian bookworm-backports/main amd64 Packages [298 kB]
Get:15 https://deb.debian.org/debian bookworm-backports/main Translation-en [251 kB]
Get:16 https://deb.debian.org/debian-security bookworm-security/main Sources [195 kB]
Get:17 https://deb.debian.org/debian-security bookworm-security/main amd64 Packages [289 kB]
Get:18 https://deb.debian.org/debian-security bookworm-security/main Translation-en [175 kB]
Fetched 26.2 MB in 3s (8434 kB/s)
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
Calculating upgrade...
The following NEW packages will be installed:
  firmware-linux-free linux-image-6.1.0-41-cloud-amd64
The following packages will be upgraded:
  base-files bash bind9-host bind9-libs ca-certificates cloud-init curl
  debian-archive-keyring distro-info-data e2fsprogs gcc-12-base gpgv init
  init-system-helpers initramfs-tools initramfs-tools-core libbpf1 libc-bin
  libc-l10n libc6 libcap2 libcap2-bin libcom-err2 libcurl3-gnutls libcurl4
  libexpat1 libext2fs2 libgcc-s1 libglib2.0-0 libgnutls30 libgssapi-krb5-2
  libicu72 libk5crypto3 libkrb5-3 libkrb5support0 libnss-myhostname
  libpam-systemd libpython3.11-minimal libpython3.11-stdlib libsqlite3-0
  libss2 libssl3 libstdc++6 libsystemd-shared libsystemd0 libudev1 libxml2
  linux-image-cloud-amd64 locales login logsave openssh-client openssh-server
  openssh-sftp-server openssl passwd perl-base python3-jinja2
  python3-pkg-resources python3.11 python3.11-minimal qemu-utils sudo systemd
  systemd-resolved systemd-sysv systemd-timesyncd tzdata udev
69 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 81.0 MB of archives.
After this operation, 108 MB of additional disk space will be used.
Get:1 file:/etc/apt/mirrors/debian.list Mirrorlist [30 B]
Get:33 file:/etc/apt/mirrors/debian-security.list Mirrorlist [39 B]
Get:2 https://deb.debian.org/debian bookworm/main amd64 base-files amd64 12.4+deb12u12 [70.9 kB]
Get:3 https://deb.debian.org/debian bookworm/main amd64 bash amd64 5.2.15-2+b9 [1491 kB]
Get:4 https://deb.debian.org/debian bookworm/main amd64 login amd64 1:4.13+dfsg1-1+deb12u1 [616 kB]
Get:5 https://deb.debian.org/debian bookworm/main amd64 perl-base amd64 5.36.0-7+deb12u3 [1608 kB]
Get:6 https://deb.debian.org/debian bookworm/main amd64 init-system-helpers all 1.65.2+deb12u1 [39.0 kB]
Get:7 https://deb.debian.org/debian bookworm/main amd64 gcc-12-base amd64 12.2.0-14+deb12u1 [37.6 kB]
Get:8 https://deb.debian.org/debian bookworm/main amd64 libgcc-s1 amd64 12.2.0-14+deb12u1 [49.9 kB]
Get:9 https://deb.debian.org/debian bookworm/main amd64 libstdc++6 amd64 12.2.0-14+deb12u1 [613 kB]
Get:10 https://deb.debian.org/debian bookworm/main amd64 libc6 amd64 2.36-9+deb12u13 [2758 kB]
Get:11 https://deb.debian.org/debian bookworm/main amd64 libc-bin amd64 2.36-9+deb12u13 [609 kB]
Get:12 https://deb.debian.org/debian bookworm/main amd64 logsave amd64 1.47.0-2+b2 [19.9 kB]
Get:13 https://deb.debian.org/debian bookworm/main amd64 initramfs-tools all 0.142+deb12u3 [16.0 kB]
Get:14 https://deb.debian.org/debian bookworm/main amd64 initramfs-tools-core all 0.142+deb12u3 [48.3 kB]
Get:15 https://deb.debian.org/debian bookworm/main amd64 libext2fs2 amd64 1.47.0-2+b2 [205 kB]
Get:16 https://deb.debian.org/debian bookworm/main amd64 e2fsprogs amd64 1.47.0-2+b2 [572 kB]
Get:17 https://deb.debian.org/debian bookworm/main amd64 libcap2 amd64 1:2.66-4+deb12u2 [27.2 kB]
Get:18 https://deb.debian.org/debian bookworm/main amd64 systemd-sysv amd64 252.39-1~deb12u1 [42.6 kB]
Get:19 https://deb.debian.org/debian bookworm/main amd64 libpam-systemd amd64 252.39-1~deb12u1 [225 kB]
Get:20 https://deb.debian.org/debian bookworm/main amd64 systemd-timesyncd amd64 252.39-1~deb12u1 [63.8 kB]
Get:21 https://deb.debian.org/debian bookworm/main amd64 systemd amd64 252.39-1~deb12u1 [3042 kB]
Get:22 https://deb.debian.org/debian bookworm/main amd64 systemd-resolved amd64 252.39-1~deb12u1 [308 kB]
Get:23 https://deb.debian.org/debian bookworm/main amd64 libsystemd-shared amd64 252.39-1~deb12u1 [1695 kB]
Get:24 https://deb.debian.org/debian bookworm/main amd64 libsystemd0 amd64 252.39-1~deb12u1 [333 kB]
Get:25 https://deb.debian.org/debian bookworm/main amd64 udev amd64 252.39-1~deb12u1 [1720 kB]
Get:26 https://deb.debian.org/debian bookworm/main amd64 libudev1 amd64 252.39-1~deb12u1 [109 kB]
Get:27 https://deb.debian.org/debian bookworm/main amd64 init amd64 1.65.2+deb12u1 [5600 B]
Get:28 https://deb.debian.org/debian bookworm/main amd64 passwd amd64 1:4.13+dfsg1-1+deb12u1 [972 kB]
Get:29 https://deb.debian.org/debian bookworm/main amd64 libgssapi-krb5-2 amd64 1.20.1-2+deb12u4 [135 kB]
Get:30 https://deb.debian.org/debian bookworm/main amd64 libkrb5-3 amd64 1.20.1-2+deb12u4 [334 kB]
Get:31 https://deb.debian.org/debian bookworm/main amd64 libkrb5support0 amd64 1.20.1-2+deb12u4 [33.2 kB]
Get:32 https://deb.debian.org/debian bookworm/main amd64 libk5crypto3 amd64 1.20.1-2+deb12u4 [79.8 kB]
Get:34 https://deb.debian.org/debian bookworm/main amd64 libcom-err2 amd64 1.47.0-2+b2 [20.0 kB]
Get:35 https://deb.debian.org/debian bookworm/main amd64 openssh-sftp-server amd64 1:9.2p1-2+deb12u7 [65.9 kB]
Get:36 https://deb.debian.org/debian bookworm/main amd64 openssh-server amd64 1:9.2p1-2+deb12u7 [457 kB]
Get:37 https://deb.debian.org/debian bookworm/main amd64 openssh-client amd64 1:9.2p1-2+deb12u7 [992 kB]
Get:38 https://deb.debian.org/debian bookworm/main amd64 python3.11 amd64 3.11.2-6+deb12u6 [573 kB]
Get:39 https://deb.debian.org/debian bookworm/main amd64 libpython3.11-stdlib amd64 3.11.2-6+deb12u6 [1798 kB]
Get:40 https://deb.debian.org/debian bookworm/main amd64 python3.11-minimal amd64 3.11.2-6+deb12u6 [2064 kB]
Get:41 https://deb.debian.org/debian bookworm/main amd64 libpython3.11-minimal amd64 3.11.2-6+deb12u6 [817 kB]
Get:42 https://deb.debian.org/debian bookworm/main amd64 libsqlite3-0 amd64 3.40.1-2+deb12u2 [839 kB]
Get:43 https://deb.debian.org/debian bookworm/main amd64 libexpat1 amd64 2.5.0-1+deb12u2 [99.9 kB]
Get:44 https://deb.debian.org/debian-security bookworm-security/main amd64 libssl3 amd64 3.0.17-1~deb12u3 [2028 kB]
Get:45 https://deb.debian.org/debian bookworm/main amd64 sudo amd64 1.9.13p3-1+deb12u2 [1890 kB]
Get:46 https://deb.debian.org/debian bookworm/main amd64 debian-archive-keyring all 2023.3+deb12u2 [179 kB]
Get:47 https://deb.debian.org/debian bookworm/main amd64 gpgv amd64 2.2.40-1.1+deb12u1 [649 kB]
Get:48 https://deb.debian.org/debian bookworm/main amd64 libgnutls30 amd64 3.7.9-2+deb12u5 [1406 kB]
Get:49 https://deb.debian.org/debian bookworm/main amd64 tzdata all 2025b-0+deb12u2 [300 kB]
Get:50 https://deb.debian.org/debian bookworm/main amd64 libicu72 amd64 72.1-3+deb12u1 [9376 kB]
Get:51 https://deb.debian.org/debian bookworm/main amd64 libxml2 amd64 2.9.14+dfsg-1.3~deb12u4 [687 kB]
Get:52 https://deb.debian.org/debian-security bookworm-security/main amd64 bind9-host amd64 1:9.18.41-1~deb12u1 [54.7 kB]
Get:53 https://deb.debian.org/debian-security bookworm-security/main amd64 bind9-libs amd64 1:9.18.41-1~deb12u1 [1181 kB]
Get:54 https://deb.debian.org/debian-security bookworm-security/main amd64 openssl amd64 3.0.17-1~deb12u3 [1434 kB]
Get:55 https://deb.debian.org/debian bookworm/main amd64 ca-certificates all 20230311+deb12u1 [155 kB]
Get:56 https://deb.debian.org/debian bookworm/main amd64 libc-l10n all 2.36-9+deb12u13 [677 kB]
Get:57 https://deb.debian.org/debian bookworm/main amd64 locales all 2.36-9+deb12u13 [3901 kB]
Get:58 https://deb.debian.org/debian bookworm/main amd64 python3-jinja2 all 3.1.2-1+deb12u3 [120 kB]
Get:59 https://deb.debian.org/debian bookworm/main amd64 cloud-init all 22.4.2-1+deb12u3 [589 kB]
Get:60 https://deb.debian.org/debian bookworm/main amd64 curl amd64 7.88.1-10+deb12u14 [316 kB]
Get:61 https://deb.debian.org/debian bookworm/main amd64 libcurl4 amd64 7.88.1-10+deb12u14 [392 kB]
Get:62 https://deb.debian.org/debian bookworm/main amd64 distro-info-data all 0.58+deb12u5 [6452 B]
Get:63 https://deb.debian.org/debian bookworm/main amd64 firmware-linux-free all 20200122-1 [24.2 kB]
Get:64 https://deb.debian.org/debian bookworm/main amd64 libbpf1 amd64 1:1.1.2-0+deb12u1 [145 kB]
Get:65 https://deb.debian.org/debian bookworm/main amd64 libcap2-bin amd64 1:2.66-4+deb12u2 [34.9 kB]
Get:66 https://deb.debian.org/debian bookworm/main amd64 libcurl3-gnutls amd64 7.88.1-10+deb12u14 [386 kB]
Get:67 https://deb.debian.org/debian bookworm/main amd64 libglib2.0-0 amd64 2.74.6-2+deb12u7 [1401 kB]
Get:68 https://deb.debian.org/debian bookworm/main amd64 libnss-myhostname amd64 252.39-1~deb12u1 [84.8 kB]
Get:69 https://deb.debian.org/debian bookworm/main amd64 libss2 amd64 1.47.0-2+b2 [24.8 kB]
Get:70 https://deb.debian.org/debian-security bookworm-security/main amd64 linux-image-6.1.0-41-cloud-amd64 amd64 6.1.158-1 [26.3 MB]
Get:71 https://deb.debian.org/debian-security bookworm-security/main amd64 linux-image-cloud-amd64 amd64 6.1.158-1 [1504 B]
Get:72 https://deb.debian.org/debian bookworm/main amd64 python3-pkg-resources all 66.1.1-1+deb12u2 [297 kB]
Get:73 https://deb.debian.org/debian bookworm/main amd64 qemu-utils amd64 1:7.2+dfsg-7+deb12u16 [1291 kB]
apt-listchanges: Reading changelogs...
Preconfiguring packages ...
Fetched 81.0 MB in 3s (30.5 MB/s)
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20783 files and directories currently installed.)
Preparing to unpack .../base-files_12.4+deb12u12_amd64.deb ...
Unpacking base-files (12.4+deb12u12) over (12.4+deb12u10) ...
Setting up base-files (12.4+deb12u12) ...
Installing new version of config file /etc/debian_version ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20783 files and directories currently installed.)
Preparing to unpack .../bash_5.2.15-2+b9_amd64.deb ...
Unpacking bash (5.2.15-2+b9) over (5.2.15-2+b7) ...
Setting up bash (5.2.15-2+b9) ...
update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20783 files and directories currently installed.)
Preparing to unpack .../login_1%3a4.13+dfsg1-1+deb12u1_amd64.deb ...
Unpacking login (1:4.13+dfsg1-1+deb12u1) over (1:4.13+dfsg1-1+b1) ...
Setting up login (1:4.13+dfsg1-1+deb12u1) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20782 files and directories currently installed.)
Preparing to unpack .../perl-base_5.36.0-7+deb12u3_amd64.deb ...
Unpacking perl-base (5.36.0-7+deb12u3) over (5.36.0-7+deb12u2) ...
Setting up perl-base (5.36.0-7+deb12u3) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20782 files and directories currently installed.)
Preparing to unpack .../init-system-helpers_1.65.2+deb12u1_all.deb ...
Unpacking init-system-helpers (1.65.2+deb12u1) over (1.65.2) ...
Setting up init-system-helpers (1.65.2+deb12u1) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20783 files and directories currently installed.)
Preparing to unpack .../gcc-12-base_12.2.0-14+deb12u1_amd64.deb ...
Unpacking gcc-12-base:amd64 (12.2.0-14+deb12u1) over (12.2.0-14) ...
Setting up gcc-12-base:amd64 (12.2.0-14+deb12u1) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20783 files and directories currently installed.)
Preparing to unpack .../libgcc-s1_12.2.0-14+deb12u1_amd64.deb ...
Unpacking libgcc-s1:amd64 (12.2.0-14+deb12u1) over (12.2.0-14) ...
Setting up libgcc-s1:amd64 (12.2.0-14+deb12u1) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20783 files and directories currently installed.)
Preparing to unpack .../libstdc++6_12.2.0-14+deb12u1_amd64.deb ...
Unpacking libstdc++6:amd64 (12.2.0-14+deb12u1) over (12.2.0-14) ...
Setting up libstdc++6:amd64 (12.2.0-14+deb12u1) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20783 files and directories currently installed.)
Preparing to unpack .../libc6_2.36-9+deb12u13_amd64.deb ...
Unpacking libc6:amd64 (2.36-9+deb12u13) over (2.36-9+deb12u10) ...
Setting up libc6:amd64 (2.36-9+deb12u13) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20783 files and directories currently installed.)
Preparing to unpack .../libc-bin_2.36-9+deb12u13_amd64.deb ...
Unpacking libc-bin (2.36-9+deb12u13) over (2.36-9+deb12u10) ...
Setting up libc-bin (2.36-9+deb12u13) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20783 files and directories currently installed.)
Preparing to unpack .../logsave_1.47.0-2+b2_amd64.deb ...
Unpacking logsave (1.47.0-2+b2) over (1.47.0-2) ...
Preparing to unpack .../initramfs-tools_0.142+deb12u3_all.deb ...
Unpacking initramfs-tools (0.142+deb12u3) over (0.142+deb12u1) ...
Preparing to unpack .../initramfs-tools-core_0.142+deb12u3_all.deb ...
Unpacking initramfs-tools-core (0.142+deb12u3) over (0.142+deb12u1) ...
Preparing to unpack .../libext2fs2_1.47.0-2+b2_amd64.deb ...
Unpacking libext2fs2:amd64 (1.47.0-2+b2) over (1.47.0-2) ...
Setting up libext2fs2:amd64 (1.47.0-2+b2) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20785 files and directories currently installed.)
Preparing to unpack .../e2fsprogs_1.47.0-2+b2_amd64.deb ...
Unpacking e2fsprogs (1.47.0-2+b2) over (1.47.0-2) ...
Preparing to unpack .../libcap2_1%3a2.66-4+deb12u2_amd64.deb ...
Unpacking libcap2:amd64 (1:2.66-4+deb12u2) over (1:2.66-4) ...
Setting up libcap2:amd64 (1:2.66-4+deb12u2) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20786 files and directories currently installed.)
Preparing to unpack .../systemd-sysv_252.39-1~deb12u1_amd64.deb ...
Unpacking systemd-sysv (252.39-1~deb12u1) over (252.36-1~deb12u1) ...
Preparing to unpack .../libpam-systemd_252.39-1~deb12u1_amd64.deb ...
Unpacking libpam-systemd:amd64 (252.39-1~deb12u1) over (252.36-1~deb12u1) ...
Preparing to unpack .../libssl3_3.0.17-1~deb12u3_amd64.deb ...
Unpacking libssl3:amd64 (3.0.17-1~deb12u3) over (3.0.15-1~deb12u1) ...
Preparing to unpack .../systemd-timesyncd_252.39-1~deb12u1_amd64.deb ...
Unpacking systemd-timesyncd (252.39-1~deb12u1) over (252.36-1~deb12u1) ...
Setting up libssl3:amd64 (3.0.17-1~deb12u3) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20786 files and directories currently installed.)
Preparing to unpack .../systemd_252.39-1~deb12u1_amd64.deb ...
Unpacking systemd (252.39-1~deb12u1) over (252.36-1~deb12u1) ...
Preparing to unpack .../systemd-resolved_252.39-1~deb12u1_amd64.deb ...
Unpacking systemd-resolved (252.39-1~deb12u1) over (252.36-1~deb12u1) ...
Preparing to unpack .../libsystemd-shared_252.39-1~deb12u1_amd64.deb ...
Unpacking libsystemd-shared:amd64 (252.39-1~deb12u1) over (252.36-1~deb12u1) ...
Preparing to unpack .../libsystemd0_252.39-1~deb12u1_amd64.deb ...
Unpacking libsystemd0:amd64 (252.39-1~deb12u1) over (252.36-1~deb12u1) ...
Setting up libsystemd0:amd64 (252.39-1~deb12u1) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20787 files and directories currently installed.)
Preparing to unpack .../udev_252.39-1~deb12u1_amd64.deb ...
Unpacking udev (252.39-1~deb12u1) over (252.36-1~deb12u1) ...
Preparing to unpack .../libudev1_252.39-1~deb12u1_amd64.deb ...
Unpacking libudev1:amd64 (252.39-1~deb12u1) over (252.36-1~deb12u1) ...
Setting up libudev1:amd64 (252.39-1~deb12u1) ...
Setting up libsystemd-shared:amd64 (252.39-1~deb12u1) ...
Setting up systemd (252.39-1~deb12u1) ...
Setting up systemd-sysv (252.39-1~deb12u1) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20788 files and directories currently installed.)
Preparing to unpack .../init_1.65.2+deb12u1_amd64.deb ...
Unpacking init (1.65.2+deb12u1) over (1.65.2) ...
Preparing to unpack .../passwd_1%3a4.13+dfsg1-1+deb12u1_amd64.deb ...
Unpacking passwd (1:4.13+dfsg1-1+deb12u1) over (1:4.13+dfsg1-1+b1) ...
Setting up passwd (1:4.13+dfsg1-1+deb12u1) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20787 files and directories currently installed.)
Preparing to unpack .../00-libgssapi-krb5-2_1.20.1-2+deb12u4_amd64.deb ...
Unpacking libgssapi-krb5-2:amd64 (1.20.1-2+deb12u4) over (1.20.1-2+deb12u2) ...
Preparing to unpack .../01-libkrb5-3_1.20.1-2+deb12u4_amd64.deb ...
Unpacking libkrb5-3:amd64 (1.20.1-2+deb12u4) over (1.20.1-2+deb12u2) ...
Preparing to unpack .../02-libkrb5support0_1.20.1-2+deb12u4_amd64.deb ...
Unpacking libkrb5support0:amd64 (1.20.1-2+deb12u4) over (1.20.1-2+deb12u2) ...
Preparing to unpack .../03-libk5crypto3_1.20.1-2+deb12u4_amd64.deb ...
Unpacking libk5crypto3:amd64 (1.20.1-2+deb12u4) over (1.20.1-2+deb12u2) ...
Preparing to unpack .../04-libcom-err2_1.47.0-2+b2_amd64.deb ...
Unpacking libcom-err2:amd64 (1.47.0-2+b2) over (1.47.0-2) ...
Preparing to unpack .../05-openssh-sftp-server_1%3a9.2p1-2+deb12u7_amd64.deb ...
Unpacking openssh-sftp-server (1:9.2p1-2+deb12u7) over (1:9.2p1-2+deb12u5) ...
Preparing to unpack .../06-openssh-server_1%3a9.2p1-2+deb12u7_amd64.deb ...
Unpacking openssh-server (1:9.2p1-2+deb12u7) over (1:9.2p1-2+deb12u5) ...
Preparing to unpack .../07-openssh-client_1%3a9.2p1-2+deb12u7_amd64.deb ...
Unpacking openssh-client (1:9.2p1-2+deb12u7) over (1:9.2p1-2+deb12u5) ...
Preparing to unpack .../08-python3.11_3.11.2-6+deb12u6_amd64.deb ...
Unpacking python3.11 (3.11.2-6+deb12u6) over (3.11.2-6+deb12u5) ...
Preparing to unpack .../09-libpython3.11-stdlib_3.11.2-6+deb12u6_amd64.deb ...
Unpacking libpython3.11-stdlib:amd64 (3.11.2-6+deb12u6) over (3.11.2-6+deb12u5) ...
Preparing to unpack .../10-python3.11-minimal_3.11.2-6+deb12u6_amd64.deb ...
Unpacking python3.11-minimal (3.11.2-6+deb12u6) over (3.11.2-6+deb12u5) ...
Preparing to unpack .../11-libpython3.11-minimal_3.11.2-6+deb12u6_amd64.deb ...
Unpacking libpython3.11-minimal:amd64 (3.11.2-6+deb12u6) over (3.11.2-6+deb12u5) ...
Preparing to unpack .../12-libsqlite3-0_3.40.1-2+deb12u2_amd64.deb ...
Unpacking libsqlite3-0:amd64 (3.40.1-2+deb12u2) over (3.40.1-2+deb12u1) ...
Preparing to unpack .../13-libexpat1_2.5.0-1+deb12u2_amd64.deb ...
Unpacking libexpat1:amd64 (2.5.0-1+deb12u2) over (2.5.0-1+deb12u1) ...
Preparing to unpack .../14-sudo_1.9.13p3-1+deb12u2_amd64.deb ...
Unpacking sudo (1.9.13p3-1+deb12u2) over (1.9.13p3-1+deb12u1) ...
Preparing to unpack .../15-debian-archive-keyring_2023.3+deb12u2_all.deb ...
Unpacking debian-archive-keyring (2023.3+deb12u2) over (2023.3+deb12u1) ...
Setting up debian-archive-keyring (2023.3+deb12u2) ...
Removing obsolete conffile /etc/apt/trusted.gpg.d/debian-archive-buster-stable.asc ...
Removing obsolete conffile /etc/apt/trusted.gpg.d/debian-archive-buster-security-automatic.asc ...
Removing obsolete conffile /etc/apt/trusted.gpg.d/debian-archive-buster-automatic.asc ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20788 files and directories currently installed.)
Preparing to unpack .../gpgv_2.2.40-1.1+deb12u1_amd64.deb ...
Unpacking gpgv (2.2.40-1.1+deb12u1) over (2.2.40-1.1) ...
Setting up gpgv (2.2.40-1.1+deb12u1) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20788 files and directories currently installed.)
Preparing to unpack .../libgnutls30_3.7.9-2+deb12u5_amd64.deb ...
Unpacking libgnutls30:amd64 (3.7.9-2+deb12u5) over (3.7.9-2+deb12u4) ...
Setting up libgnutls30:amd64 (3.7.9-2+deb12u5) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20788 files and directories currently installed.)
Preparing to unpack .../00-tzdata_2025b-0+deb12u2_all.deb ...
Unpacking tzdata (2025b-0+deb12u2) over (2025b-0+deb12u1) ...
Preparing to unpack .../01-libicu72_72.1-3+deb12u1_amd64.deb ...
Unpacking libicu72:amd64 (72.1-3+deb12u1) over (72.1-3) ...
Preparing to unpack .../02-libxml2_2.9.14+dfsg-1.3~deb12u4_amd64.deb ...
Unpacking libxml2:amd64 (2.9.14+dfsg-1.3~deb12u4) over (2.9.14+dfsg-1.3~deb12u1) ...
Preparing to unpack .../03-bind9-host_1%3a9.18.41-1~deb12u1_amd64.deb ...
Unpacking bind9-host (1:9.18.41-1~deb12u1) over (1:9.18.33-1~deb12u2) ...
Preparing to unpack .../04-bind9-libs_1%3a9.18.41-1~deb12u1_amd64.deb ...
Unpacking bind9-libs:amd64 (1:9.18.41-1~deb12u1) over (1:9.18.33-1~deb12u2) ...
Preparing to unpack .../05-openssl_3.0.17-1~deb12u3_amd64.deb ...
Unpacking openssl (3.0.17-1~deb12u3) over (3.0.15-1~deb12u1) ...
Preparing to unpack .../06-ca-certificates_20230311+deb12u1_all.deb ...
Unpacking ca-certificates (20230311+deb12u1) over (20230311) ...
Preparing to unpack .../07-libc-l10n_2.36-9+deb12u13_all.deb ...
Unpacking libc-l10n (2.36-9+deb12u13) over (2.36-9+deb12u10) ...
Preparing to unpack .../08-locales_2.36-9+deb12u13_all.deb ...
Unpacking locales (2.36-9+deb12u13) over (2.36-9+deb12u10) ...
Preparing to unpack .../09-python3-jinja2_3.1.2-1+deb12u3_all.deb ...
Unpacking python3-jinja2 (3.1.2-1+deb12u3) over (3.1.2-1+deb12u2) ...
Preparing to unpack .../10-cloud-init_22.4.2-1+deb12u3_all.deb ...
Unpacking cloud-init (22.4.2-1+deb12u3) over (22.4.2-1+deb12u2) ...
Preparing to unpack .../11-curl_7.88.1-10+deb12u14_amd64.deb ...
Unpacking curl (7.88.1-10+deb12u14) over (7.88.1-10+deb12u12) ...
Preparing to unpack .../12-libcurl4_7.88.1-10+deb12u14_amd64.deb ...
Unpacking libcurl4:amd64 (7.88.1-10+deb12u14) over (7.88.1-10+deb12u12) ...
Preparing to unpack .../13-distro-info-data_0.58+deb12u5_all.deb ...
Unpacking distro-info-data (0.58+deb12u5) over (0.58+deb12u3) ...
Selecting previously unselected package firmware-linux-free.
Preparing to unpack .../14-firmware-linux-free_20200122-1_all.deb ...
Unpacking firmware-linux-free (20200122-1) ...
Preparing to unpack .../15-libbpf1_1%3a1.1.2-0+deb12u1_amd64.deb ...
Unpacking libbpf1:amd64 (1:1.1.2-0+deb12u1) over (1:1.1.0-1) ...
Preparing to unpack .../16-libcap2-bin_1%3a2.66-4+deb12u2_amd64.deb ...
Unpacking libcap2-bin (1:2.66-4+deb12u2) over (1:2.66-4) ...
Preparing to unpack .../17-libcurl3-gnutls_7.88.1-10+deb12u14_amd64.deb ...
Unpacking libcurl3-gnutls:amd64 (7.88.1-10+deb12u14) over (7.88.1-10+deb12u12) ...
Preparing to unpack .../18-libglib2.0-0_2.74.6-2+deb12u7_amd64.deb ...
Unpacking libglib2.0-0:amd64 (2.74.6-2+deb12u7) over (2.74.6-2+deb12u5) ...
Preparing to unpack .../19-libnss-myhostname_252.39-1~deb12u1_amd64.deb ...
Unpacking libnss-myhostname:amd64 (252.39-1~deb12u1) over (252.36-1~deb12u1) ...
Preparing to unpack .../20-libss2_1.47.0-2+b2_amd64.deb ...
Unpacking libss2:amd64 (1.47.0-2+b2) over (1.47.0-2) ...
Selecting previously unselected package linux-image-6.1.0-41-cloud-amd64.
Preparing to unpack .../21-linux-image-6.1.0-41-cloud-amd64_6.1.158-1_amd64.deb ...
Unpacking linux-image-6.1.0-41-cloud-amd64 (6.1.158-1) ...
Preparing to unpack .../22-linux-image-cloud-amd64_6.1.158-1_amd64.deb ...
Unpacking linux-image-cloud-amd64 (6.1.158-1) over (6.1.135-1) ...
Preparing to unpack .../23-python3-pkg-resources_66.1.1-1+deb12u2_all.deb ...
Unpacking python3-pkg-resources (66.1.1-1+deb12u2) over (66.1.1-1+deb12u1) ...
Preparing to unpack .../24-qemu-utils_1%3a7.2+dfsg-7+deb12u16_amd64.deb ...
Unpacking qemu-utils (1:7.2+dfsg-7+deb12u16) over (1:7.2+dfsg-7+deb12u12) ...
Setting up python3-pkg-resources (66.1.1-1+deb12u2) ...
Setting up libexpat1:amd64 (2.5.0-1+deb12u2) ...
Setting up libc-l10n (2.36-9+deb12u13) ...
Setting up libicu72:amd64 (72.1-3+deb12u1) ...
Setting up init (1.65.2+deb12u1) ...
Setting up firmware-linux-free (20200122-1) ...
Setting up libglib2.0-0:amd64 (2.74.6-2+deb12u7) ...
No schema files found: doing nothing.
Setting up distro-info-data (0.58+deb12u5) ...
Setting up libsqlite3-0:amd64 (3.40.1-2+deb12u2) ...
Setting up libcom-err2:amd64 (1.47.0-2+b2) ...
Setting up locales (2.36-9+deb12u13) ...
Generating locales (this might take a while)...
Generation complete.
Setting up libkrb5support0:amd64 (1.20.1-2+deb12u4) ...
Setting up tzdata (2025b-0+deb12u2) ...

Current default time zone: 'Europe/Berlin'
Local time is now:      Sun Dec  7 16:41:13 CET 2025.
Universal Time is now:  Sun Dec  7 15:41:13 UTC 2025.
Run 'dpkg-reconfigure tzdata' if you wish to change it.

Setting up libcap2-bin (1:2.66-4+deb12u2) ...
Setting up python3-jinja2 (3.1.2-1+deb12u3) ...
Setting up systemd-timesyncd (252.39-1~deb12u1) ...
Setting up udev (252.39-1~deb12u1) ...
Setting up libss2:amd64 (1.47.0-2+b2) ...
Setting up libnss-myhostname:amd64 (252.39-1~deb12u1) ...
Setting up sudo (1.9.13p3-1+deb12u2) ...
Setting up libk5crypto3:amd64 (1.20.1-2+deb12u4) ...
Setting up logsave (1.47.0-2+b2) ...
Setting up libpam-systemd:amd64 (252.39-1~deb12u1) ...
Setting up libkrb5-3:amd64 (1.20.1-2+deb12u4) ...
Setting up libpython3.11-minimal:amd64 (3.11.2-6+deb12u6) ...
Setting up qemu-utils (1:7.2+dfsg-7+deb12u16) ...
Setting up initramfs-tools-core (0.142+deb12u3) ...
Setting up openssl (3.0.17-1~deb12u3) ...
Setting up libxml2:amd64 (2.9.14+dfsg-1.3~deb12u4) ...
Setting up libbpf1:amd64 (1:1.1.2-0+deb12u1) ...
Setting up systemd-resolved (252.39-1~deb12u1) ...
Setting up python3.11-minimal (3.11.2-6+deb12u6) ...
Setting up cloud-init (22.4.2-1+deb12u3) ...
Setting up initramfs-tools (0.142+deb12u3) ...
update-initramfs: deferring update (trigger activated)
Setting up libpython3.11-stdlib:amd64 (3.11.2-6+deb12u6) ...
Setting up e2fsprogs (1.47.0-2+b2) ...
update-initramfs: deferring update (trigger activated)
e2scrub_all.service is a disabled or a static unit not running, not starting it.
Setting up ca-certificates (20230311+deb12u1) ...
Updating certificates in /etc/ssl/certs...
rehash: warning: skipping ca-certificates.crt,it does not contain exactly one certificate or CRL
2 added, 0 removed; done.
Setting up linux-image-6.1.0-41-cloud-amd64 (6.1.158-1) ...
/etc/kernel/postinst.d/initramfs-tools:
update-initramfs: Generating /boot/initrd.img-6.1.0-41-cloud-amd64
/etc/kernel/postinst.d/zz-update-grub:
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-6.1.0-41-cloud-amd64
Found initrd image: /boot/initrd.img-6.1.0-41-cloud-amd64
Found linux image: /boot/vmlinuz-6.1.0-34-cloud-amd64
Found initrd image: /boot/initrd.img-6.1.0-34-cloud-amd64
done
Setting up libgssapi-krb5-2:amd64 (1.20.1-2+deb12u4) ...
Setting up linux-image-cloud-amd64 (6.1.158-1) ...
Setting up libcurl4:amd64 (7.88.1-10+deb12u14) ...
Setting up curl (7.88.1-10+deb12u14) ...
Setting up python3.11 (3.11.2-6+deb12u6) ...
Setting up bind9-libs:amd64 (1:9.18.41-1~deb12u1) ...
Setting up openssh-client (1:9.2p1-2+deb12u7) ...
Setting up libcurl3-gnutls:amd64 (7.88.1-10+deb12u14) ...
Setting up bind9-host (1:9.18.41-1~deb12u1) ...
Setting up openssh-sftp-server (1:9.2p1-2+deb12u7) ...
Setting up openssh-server (1:9.2p1-2+deb12u7) ...
rescue-ssh.target is a disabled or a static unit not running, not starting it.
ssh.socket is a disabled or a static unit not running, not starting it.
Processing triggers for systemd (252.39-1~deb12u1) ...
Processing triggers for man-db (2.11.2-2) ...
Processing triggers for dbus (1.14.10-1~deb12u1) ...
Processing triggers for debianutils (5.7-0.5~deb12u1) ...
Processing triggers for libc-bin (2.36-9+deb12u13) ...
Processing triggers for initramfs-tools (0.142+deb12u3) ...
update-initramfs: Generating /boot/initrd.img-6.1.0-41-cloud-amd64
Processing triggers for ca-certificates (20230311+deb12u1) ...
Updating certificates in /etc/ssl/certs...
0 added, 0 removed; done.
Running hooks in /etc/ca-certificates/update.d...
done.
Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
  bsd-mailx cron-daemon-common exim4-base exim4-config exim4-daemon-light
  libevent-2.1-7 libgnutls-dane0 libidn12 liblockfile-bin liblockfile1
  libunbound8
Suggested packages:
  anacron logrotate checksecurity exim4-doc-html | exim4-doc-info eximon4
  spf-tools-perl swaks dns-root-data
The following NEW packages will be installed:
  bsd-mailx cron cron-daemon-common exim4-base exim4-config exim4-daemon-light
  libevent-2.1-7 libgnutls-dane0 libidn12 liblockfile-bin liblockfile1
  libunbound8
0 upgraded, 12 newly installed, 0 to remove and 0 not upgraded.
Need to get 3417 kB of archives.
After this operation, 7211 kB of additional disk space will be used.
Get:1 file:/etc/apt/mirrors/debian.list Mirrorlist [30 B]
Get:2 https://deb.debian.org/debian bookworm/main amd64 cron-daemon-common all 3.0pl1-162 [12.7 kB]
Get:3 https://deb.debian.org/debian bookworm/main amd64 cron amd64 3.0pl1-162 [73.1 kB]
Get:4 https://deb.debian.org/debian bookworm/main amd64 liblockfile-bin amd64 1.17-1+b1 [20.8 kB]
Get:5 https://deb.debian.org/debian bookworm/main amd64 exim4-config all 4.96-15+deb12u7 [256 kB]
Get:6 https://deb.debian.org/debian bookworm/main amd64 exim4-base amd64 4.96-15+deb12u7 [1118 kB]
Get:7 https://deb.debian.org/debian bookworm/main amd64 libevent-2.1-7 amd64 2.1.12-stable-8 [180 kB]
Get:8 https://deb.debian.org/debian bookworm/main amd64 libunbound8 amd64 1.17.1-2+deb12u3 [553 kB]
Get:9 https://deb.debian.org/debian bookworm/main amd64 libgnutls-dane0 amd64 3.7.9-2+deb12u5 [407 kB]
Get:10 https://deb.debian.org/debian bookworm/main amd64 libidn12 amd64 1.41-1 [83.8 kB]
Get:11 https://deb.debian.org/debian bookworm/main amd64 exim4-daemon-light amd64 4.96-15+deb12u7 [605 kB]
Get:12 https://deb.debian.org/debian bookworm/main amd64 liblockfile1 amd64 1.17-1+b1 [17.0 kB]
Get:13 https://deb.debian.org/debian bookworm/main amd64 bsd-mailx amd64 8.1.2-0.20220412cvs-1 [90.4 kB]
Preconfiguring packages ...
Fetched 3417 kB in 0s (11.0 MB/s)
Selecting previously unselected package cron-daemon-common.
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 22200 files and directories currently installed.)
Preparing to unpack .../cron-daemon-common_3.0pl1-162_all.deb ...
Unpacking cron-daemon-common (3.0pl1-162) ...
Setting up cron-daemon-common (3.0pl1-162) ...
Adding group `crontab' (GID 109) ...
Done.
Selecting previously unselected package cron.
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 22217 files and directories currently installed.)
Preparing to unpack .../00-cron_3.0pl1-162_amd64.deb ...
Unpacking cron (3.0pl1-162) ...
Selecting previously unselected package liblockfile-bin.
Preparing to unpack .../01-liblockfile-bin_1.17-1+b1_amd64.deb ...
Unpacking liblockfile-bin (1.17-1+b1) ...
Selecting previously unselected package exim4-config.
Preparing to unpack .../02-exim4-config_4.96-15+deb12u7_all.deb ...
Unpacking exim4-config (4.96-15+deb12u7) ...
Selecting previously unselected package exim4-base.
Preparing to unpack .../03-exim4-base_4.96-15+deb12u7_amd64.deb ...
Unpacking exim4-base (4.96-15+deb12u7) ...
Selecting previously unselected package libevent-2.1-7:amd64.
Preparing to unpack .../04-libevent-2.1-7_2.1.12-stable-8_amd64.deb ...
Unpacking libevent-2.1-7:amd64 (2.1.12-stable-8) ...
Selecting previously unselected package libunbound8:amd64.
Preparing to unpack .../05-libunbound8_1.17.1-2+deb12u3_amd64.deb ...
Unpacking libunbound8:amd64 (1.17.1-2+deb12u3) ...
Selecting previously unselected package libgnutls-dane0:amd64.
Preparing to unpack .../06-libgnutls-dane0_3.7.9-2+deb12u5_amd64.deb ...
Unpacking libgnutls-dane0:amd64 (3.7.9-2+deb12u5) ...
Selecting previously unselected package libidn12:amd64.
Preparing to unpack .../07-libidn12_1.41-1_amd64.deb ...
Unpacking libidn12:amd64 (1.41-1) ...
Selecting previously unselected package exim4-daemon-light.
Preparing to unpack .../08-exim4-daemon-light_4.96-15+deb12u7_amd64.deb ...
Unpacking exim4-daemon-light (4.96-15+deb12u7) ...
Selecting previously unselected package liblockfile1:amd64.
Preparing to unpack .../09-liblockfile1_1.17-1+b1_amd64.deb ...
Unpacking liblockfile1:amd64 (1.17-1+b1) ...
Selecting previously unselected package bsd-mailx.
Preparing to unpack .../10-bsd-mailx_8.1.2-0.20220412cvs-1_amd64.deb ...
Unpacking bsd-mailx (8.1.2-0.20220412cvs-1) ...
Setting up liblockfile-bin (1.17-1+b1) ...
Setting up cron (3.0pl1-162) ...
Created symlink /etc/systemd/system/multi-user.target.wants/cron.service → /lib/systemd/system/cron.service.

Setting up libidn12:amd64 (1.41-1) ...
Setting up libevent-2.1-7:amd64 (2.1.12-stable-8) ...
Setting up exim4-config (4.96-15+deb12u7) ...
Adding system-user for exim (v4)
Setting up liblockfile1:amd64 (1.17-1+b1) ...
Setting up exim4-base (4.96-15+deb12u7) ...
exim: DB upgrade, deleting hints-db
Created symlink /etc/systemd/system/timers.target.wants/exim4-base.timer → /lib/systemd/system/exim4-base.timer.

exim4-base.service is a disabled or a static unit, not starting it.
Setting up libunbound8:amd64 (1.17.1-2+deb12u3) ...
Setting up libgnutls-dane0:amd64 (3.7.9-2+deb12u5) ...
Setting up exim4-daemon-light (4.96-15+deb12u7) ...
Setting up bsd-mailx (8.1.2-0.20220412cvs-1) ...
update-alternatives: using /usr/bin/bsd-mailx to provide /usr/bin/mailx (mailx) in auto mode
Processing triggers for man-db (2.11.2-2) ...
Processing triggers for libc-bin (2.36-9+deb12u13) ...
2025-12-07 15:41:51,653 - ug_util.py[WARNING]: DEPRECATED: 'user' of type string is deprecated and will be removed in a future release. Use 'users' list instead.
Cloud-init v. 22.4.2 finished at Sun, 07 Dec 2025 15:41:51 +0000. Datasource DataSourceNoCloud [seed=/dev/sr0][dsmode=net].  Up 90.56 seconds
Cloud-init v. 22.4.2 running 'init-local' at Sun, 07 Dec 2025 16:06:03 +0000. Up 3.72 seconds.
Cloud-init v. 22.4.2 running 'modules:config' at Sun, 07 Dec 2025 16:06:17 +0000. Up 18.39 seconds.
Cloud-init v. 22.4.2 running 'modules:final' at Sun, 07 Dec 2025 16:06:18 +0000. Up 18.77 seconds.
Cloud-init v. 22.4.2 finished at Sun, 07 Dec 2025 16:06:18 +0000. Datasource DataSourceNoCloud [seed=/dev/sr0][dsmode=net].  Up 18.85 seconds
Cloud-init v. 22.4.2 running 'init-local' at Sun, 07 Dec 2025 16:55:51 +0000. Up 4.04 seconds.
Cloud-init v. 22.4.2 running 'modules:config' at Sun, 07 Dec 2025 16:56:05 +0000. Up 18.39 seconds.
Cloud-init v. 22.4.2 running 'modules:final' at Sun, 07 Dec 2025 16:56:06 +0000. Up 18.77 seconds.
Cloud-init v. 22.4.2 finished at Sun, 07 Dec 2025 16:56:06 +0000. Datasource DataSourceNoCloud [seed=/dev/sr0][dsmode=net].  Up 18.85 seconds
Cloud-init v. 22.4.2 running 'init-local' at Tue, 13 Jan 2026 22:24:47 +0000. Up 4.43 seconds.
Cloud-init v. 22.4.2 running 'modules:config' at Tue, 13 Jan 2026 22:25:02 +0000. Up 18.90 seconds.
Cloud-init v. 22.4.2 running 'modules:final' at Tue, 13 Jan 2026 22:25:02 +0000. Up 19.34 seconds.
Cloud-init v. 22.4.2 finished at Tue, 13 Jan 2026 22:25:02 +0000. Datasource DataSourceNoCloud [seed=/dev/sr0][dsmode=net].  Up 19.41 seconds
Cloud-init v. 25.1.4 running 'init' at Mon, 19 Oct 2026 23:59:53 +0000. Up 7.75 seconds.
ci-info: ++++++++++++++++++++++++++++++++++++++Net device info+++++++++++++++++++++++++++++++++++++++
ci-info: +--------+------+-----------------------------+---------------+--------+-------------------+
ci-info: | Device |  Up  |           Address           |      Mask     | Scope  |     Hw-Address    |
ci-info: +--------+------+-----------------------------+---------------+--------+-------------------+
ci-info: |  eth0  | True |        109.199.123.73       | 255.255.240.0 | global | 00:50:56:5e:95:7b |
ci-info: |  eth0  | True |  2a02:c207:2293:6396::1/64  |       .       | global | 00:50:56:5e:95:7b |
ci-info: |  eth0  | True | fe80::250:56ff:fe5e:957b/64 |       .       |  link  | 00:50:56:5e:95:7b |
ci-info: |   lo   | True |          127.0.0.1          |   255.0.0.0   |  host  |         .         |
ci-info: |   lo   | True |           ::1/128           |       .       |  host  |         .         |
ci-info: +--------+------+-----------------------------+---------------+--------+-------------------+
ci-info: +++++++++++++++++++++++++++++++Route IPv4 info+++++++++++++++++++++++++++++++
ci-info: +-------+---------------+---------------+---------------+-----------+-------+
ci-info: | Route |  Destination  |    Gateway    |    Genmask    | Interface | Flags |
ci-info: +-------+---------------+---------------+---------------+-----------+-------+
ci-info: |   0   |    0.0.0.0    | 109.199.112.1 |    0.0.0.0    |    eth0   |   UG  |
ci-info: |   1   | 109.199.112.0 | 109.199.112.1 | 255.255.240.0 |    eth0   |   UG  |
ci-info: +-------+---------------+---------------+---------------+-----------+-------+
ci-info: +++++++++++++++++++++++++Route IPv6 info++++++++++++++++++++++++++
ci-info: +-------+--------------------------+---------+-----------+-------+
ci-info: | Route |       Destination        | Gateway | Interface | Flags |
ci-info: +-------+--------------------------+---------+-----------+-------+
ci-info: |   0   | 2a02:c207:2293:6396::/64 |    ::   |    eth0   |   U   |
ci-info: |   1   |        fe80::/64         |    ::   |    eth0   |   U   |
ci-info: |   2   |           ::/0           | fe80::1 |    eth0   |   UG  |
ci-info: |   4   |          local           |    ::   |    eth0   |   U   |
ci-info: |   5   |          local           |    ::   |    eth0   |   U   |
ci-info: |   6   |        multicast         |    ::   |    eth0   |   U   |
ci-info: +-------+--------------------------+---------+-----------+-------+
2026-10-19 23:59:53,980 - lifecycle.py[DEPRECATED]: 'user' of type string is deprecated in 22.2 and scheduled to be removed in 27.2. Use 'users' list instead.
2026-10-20 00:00:44,062 - url_helper.py[WARNING]: Calling 'http://169.254.169.254/2009-04-04/meta-data/instance-id' failed [50/240s]: request error [HTTPConnectionPool(host='169.254.169.254', port=80): Max retries exceeded with url: /2009-04-04/meta-data/instance-id (Caused by ConnectTimeoutError(<urllib3.connection.HTTPConnection object at 0x7fe28714b8c0>, 'Connection to 169.254.169.254 timed out. (connect timeout=50.0)'))]
2026-10-20 00:00:47,131 - url_helper.py[WARNING]: Calling 'http://[fd00:ec2::254]/2009-04-04/meta-data/instance-id' failed [53/240s]: request error [HTTPConnectionPool(host='fd00:ec2::254', port=80): Max retries exceeded with url: /2009-04-04/meta-data/instance-id (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fe2870025d0>: Failed to establish a new connection: [Errno 113] No route to host'))]
2026-10-20 00:01:38,183 - url_helper.py[WARNING]: Calling 'http://169.254.169.254/2009-04-04/meta-data/instance-id' failed [104/240s]: request error [HTTPConnectionPool(host='169.254.169.254', port=80): Max retries exceeded with url: /2009-04-04/meta-data/instance-id (Caused by ConnectTimeoutError(<urllib3.connection.HTTPConnection object at 0x7fe287002fd0>, 'Connection to 169.254.169.254 timed out. (connect timeout=50.0)'))]
2026-10-20 00:02:28,233 - url_helper.py[WARNING]: Calling 'http://[fd00:ec2::254]/2009-04-04/meta-data/instance-id' failed [154/240s]: request error [HTTPConnectionPool(host='fd00:ec2::254', port=80): Max retries exceeded with url: /2009-04-04/meta-data/instance-id (Caused by ConnectTimeoutError(<urllib3.connection.HTTPConnection object at 0x7fe287167360>, 'Connection to fd00:ec2::254 timed out. (connect timeout=50.0)'))]
2026-10-20 00:03:19,281 - url_helper.py[WARNING]: Calling 'http://169.254.169.254/2009-04-04/meta-data/instance-id' failed [205/240s]: request error [HTTPConnectionPool(host='169.254.169.254', port=80): Max retries exceeded with url: /2009-04-04/meta-data/instance-id (Caused by ConnectTimeoutError(<urllib3.connection.HTTPConnection object at 0x7fe287167100>, 'Connection to 169.254.169.254 timed out. (connect timeout=50.0)'))]
2026-10-20 00:03:53,321 - url_helper.py[WARNING]: Calling 'http://[fd00:ec2::254]/2009-04-04/meta-data/instance-id' failed [239/240s]: request error [HTTPConnectionPool(host='fd00:ec2::254', port=80): Max retries exceeded with url: /2009-04-04/meta-data/instance-id (Caused by ConnectTimeoutError(<urllib3.connection.HTTPConnection object at 0x7fe286ff4ef0>, 'Connection to fd00:ec2::254 timed out. (connect timeout=34.0)'))]
2026-10-20 00:03:53,322 - DataSourceEc2.py[CRITICAL]: Giving up on md from ['http://169.254.169.254/2009-04-04/meta-data/instance-id', 'http://[fd00:ec2::254]/2009-04-04/meta-data/instance-id'] after 239 seconds
2026-10-20 00:04:43,386 - url_helper.py[WARNING]: Calling 'http://109.199.112.1/latest/meta-data/instance-id' failed [50/120s]: request error [HTTPConnectionPool(host='109.199.112.1', port=80): Max retries exceeded with url: /latest/meta-data/instance-id (Caused by ConnectTimeoutError(<urllib3.connection.HTTPConnection object at 0x7fe286fa6580>, 'Connection to 109.199.112.1 timed out. (connect timeout=50.0)'))]
2026-10-20 00:05:34,404 - url_helper.py[WARNING]: Calling 'http://109.199.112.1/latest/meta-data/instance-id' failed [101/120s]: request error [HTTPConnectionPool(host='109.199.112.1', port=80): Max retries exceeded with url: /latest/meta-data/instance-id (Caused by ConnectTimeoutError(<urllib3.connection.HTTPConnection object at 0x7fe286fa6030>, 'Connection to 109.199.112.1 timed out. (connect timeout=50.0)'))]
2026-10-20 00:05:52,418 - url_helper.py[WARNING]: Calling 'http://109.199.112.1/latest/meta-data/instance-id' failed [119/120s]: request error [HTTPConnectionPool(host='109.199.112.1', port=80): Max retries exceeded with url: /latest/meta-data/instance-id (Caused by ConnectTimeoutError(<urllib3.connection.HTTPConnection object at 0x7fe286fa5ae0>, 'Connection to 109.199.112.1 timed out. (connect timeout=17.0)'))]
2026-10-20 00:05:52,418 - DataSourceCloudStack.py[CRITICAL]: Giving up on waiting for the metadata from ['http://109.199.112.1/latest/meta-data/instance-id'] after 119 seconds
2026-10-20 00:05:54,710 - warnings.py[WARNING]: **************************************************************************
# A new feature in cloud-init identified possible datasources for        #
# this system as:                                                        #
#   []                                                                   #
# However, the datasource used was: None                                 #
#                                                                        #
# In the future, cloud-init will only attempt to use datasources that    #
# are identified or specifically configured.                             #
# For more information see                                               #
#   https://bugs.launchpad.net/bugs/1669675                              #
#                                                                        #
# If you are seeing this message, please file a bug against              #
# cloud-init at                                                          #
#    https://github.com/canonical/cloud-init/issues                      #
# Make sure to include the cloud provider your instance is               #
# running on.                                                            #
#                                                                        #
# After you have filed a bug, you can disable this warning by launching  #
# your instance with the cloud-config below, or putting that content     #
# into /etc/cloud/cloud.cfg.d/99-warnings.cfg                            #
#                                                                        #
# #cloud-config                                                          #
# warnings:                                                              #
#   dsid_missing_source: off                                             #
**************************************************************************

Traceback (most recent call last):
  File "/usr/bin/cloud-init", line 33, in <module>
    sys.exit(load_entry_point('cloud-init==25.1.4', 'console_scripts', 'cloud-init')())
             ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^
  File "/usr/lib/python3/dist-packages/cloudinit/cmd/main.py", line 1272, in main
    return sub_main(args)
  File "/usr/lib/python3/dist-packages/cloudinit/cmd/main.py", line 1393, in sub_main
    retval = functor(name, args)
  File "/usr/lib/python3/dist-packages/cloudinit/cmd/main.py", line 974, in status_wrapper
    v1[mode]["recoverable_errors"][key] = new_recoverable_errors[
    ~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^
KeyError: 'recoverable_errors'

./new-debian13/var/log/cloud-init.log

2025-12-07 15:40:24,503 - util.py[DEBUG]: Cloud-init v. 22.4.2 running 'init-local' at Sun, 07 Dec 2025 15:40:24 +0000. Up 4.00 seconds.
2025-12-07 15:40:24,504 - main.py[DEBUG]: No kernel command line url found.
2025-12-07 15:40:24,504 - main.py[DEBUG]: Closing stdin.
2025-12-07 15:40:24,506 - util.py[DEBUG]: Writing to /var/log/cloud-init.log - ab: [644] 0 bytes
2025-12-07 15:40:24,506 - util.py[DEBUG]: Changing the ownership of /var/log/cloud-init.log to 0:4
2025-12-07 15:40:24,506 - util.py[DEBUG]: Writing to /var/lib/cloud/data/python-version - wb: [644] 4 bytes
2025-12-07 15:40:24,506 - util.py[DEBUG]: Attempting to remove /var/lib/cloud/instance/boot-finished
2025-12-07 15:40:24,506 - handlers.py[DEBUG]: start: init-local/check-cache: attempting to read from cache [check]
2025-12-07 15:40:24,506 - util.py[DEBUG]: Reading from /var/lib/cloud/instance/obj.pkl (quiet=False)
2025-12-07 15:40:24,507 - stages.py[DEBUG]: no cache found
2025-12-07 15:40:24,507 - handlers.py[DEBUG]: finish: init-local/check-cache: SUCCESS: no cache found
2025-12-07 15:40:24,507 - util.py[DEBUG]: Attempting to remove /var/lib/cloud/instance
2025-12-07 15:40:24,510 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2025-12-07 15:40:24,511 - __init__.py[DEBUG]: Looking for data source in: ['NoCloud', 'None'], via packages ['', 'cloudinit.sources'] that matches dependencies ['FILESYSTEM']
2025-12-07 15:40:24,512 - __init__.py[DEBUG]: Searching for local data source in: ['DataSourceNoCloud']
2025-12-07 15:40:24,512 - handlers.py[DEBUG]: start: init-local/search-NoCloud: searching for local data from DataSourceNoCloud
2025-12-07 15:40:24,512 - __init__.py[DEBUG]: Seeing if we can get any data from <class 'cloudinit.sources.DataSourceNoCloud.DataSourceNoCloud'>
2025-12-07 15:40:24,512 - __init__.py[DEBUG]: Update datasource metadata and network config due to events: boot-new-instance
2025-12-07 15:40:24,512 - dmi.py[DEBUG]: querying dmi data /sys/class/dmi/id/product_serial
2025-12-07 15:40:24,512 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud/user-data (quiet=False)
2025-12-07 15:40:24,513 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud/meta-data (quiet=False)
2025-12-07 15:40:24,513 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud/vendor-data (quiet=False)
2025-12-07 15:40:24,513 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud/network-config (quiet=False)
2025-12-07 15:40:24,513 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud-net/user-data (quiet=False)
2025-12-07 15:40:24,513 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud-net/meta-data (quiet=False)
2025-12-07 15:40:24,513 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud-net/vendor-data (quiet=False)
2025-12-07 15:40:24,513 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud-net/network-config (quiet=False)
2025-12-07 15:40:24,513 - subp.py[DEBUG]: Running command ['blkid', '-tTYPE=vfat', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2025-12-07 15:40:24,595 - subp.py[DEBUG]: Running command ['blkid', '-tTYPE=iso9660', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2025-12-07 15:40:24,602 - subp.py[DEBUG]: Running command ['blkid', '-tLABEL=CIDATA', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2025-12-07 15:40:24,609 - subp.py[DEBUG]: Running command ['blkid', '-tLABEL=cidata', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2025-12-07 15:40:24,617 - subp.py[DEBUG]: Running command ['blkid', '-tLABEL_FATBOOT=cidata', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2025-12-07 15:40:24,624 - DataSourceNoCloud.py[DEBUG]: Attempting to use data from /dev/sr0
2025-12-07 15:40:24,624 - util.py[DEBUG]: Reading from /proc/mounts (quiet=False)
2025-12-07 15:40:24,624 - util.py[DEBUG]: Read 1907 bytes from /proc/mounts
2025-12-07 15:40:24,624 - util.py[DEBUG]: Fetched {'sysfs': {'fstype': 'sysfs', 'mountpoint': '/sys', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'proc': {'fstype': 'proc', 'mountpoint': '/proc', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'udev': {'fstype': 'devtmpfs', 'mountpoint': '/dev', 'opts': 'rw,nosuid,relatime,size=6118932k,nr_inodes=1529733,mode=755,inode64'}, 'devpts': {'fstype': 'devpts', 'mountpoint': '/dev/pts', 'opts': 'rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000'}, 'tmpfs': {'fstype': 'tmpfs', 'mountpoint': '/etc/machine-id', 'opts': 'ro,relatime,size=1226020k,mode=755,inode64'}, '/dev/sda1': {'fstype': 'ext4', 'mountpoint': '/', 'opts': 'rw,relatime,discard,errors=remount-ro'}, 'securityfs': {'fstype': 'securityfs', 'mountpoint': '/sys/kernel/security', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'cgroup2': {'fstype': 'cgroup2', 'mountpoint': '/sys/fs/cgroup', 'opts': 'rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot'}, 'pstore': {'fstype': 'pstore', 'mountpoint': '/sys/fs/pstore', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'bpf': {'fstype': 'bpf', 'mountpoint': '/sys/fs/bpf', 'opts': 'rw,nosuid,nodev,noexec,relatime,mode=700'}, 'systemd-1': {'fstype': 'autofs', 'mountpoint': '/proc/sys/fs/binfmt_misc', 'opts': 'rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=1346'}, 'hugetlbfs': {'fstype': 'hugetlbfs', 'mountpoint': '/dev/hugepages', 'opts': 'rw,relatime,pagesize=2M'}, 'mqueue': {'fstype': 'mqueue', 'mountpoint': '/dev/mqueue', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'debugfs': {'fstype': 'debugfs', 'mountpoint': '/sys/kernel/debug', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'tracefs': {'fstype': 'tracefs', 'mountpoint': '/sys/kernel/tracing', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'fusectl': {'fstype': 'fusectl', 'mountpoint': '/sys/fs/fuse/connections', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'configfs': {'fstype': 'configfs', 'mountpoint': '/sys/kernel/config', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'ramfs': {'fstype': 'ramfs', 'mountpoint': '/run/credentials/systemd-tmpfiles-setup-dev.service', 'opts': 'ro,nosuid,nodev,noexec,relatime,mode=700'}, '/dev/sda15': {'fstype': 'vfat', 'mountpoint': '/boot/efi', 'opts': 'rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro'}} mounts from proc
2025-12-07 15:40:24,625 - subp.py[DEBUG]: Running command ['mount', '-o', 'ro', '-t', 'auto', '/dev/sr0', '/run/cloud-init/tmp/tmpy9fm0oqn'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:24,707 - util.py[DEBUG]: Reading from /run/cloud-init/tmp/tmpy9fm0oqn//user-data (quiet=False)
2025-12-07 15:40:24,708 - util.py[DEBUG]: Read 1714 bytes from /run/cloud-init/tmp/tmpy9fm0oqn//user-data
2025-12-07 15:40:24,708 - util.py[DEBUG]: Reading from /run/cloud-init/tmp/tmpy9fm0oqn//meta-data (quiet=False)
2025-12-07 15:40:24,708 - util.py[DEBUG]: Read 54 bytes from /run/cloud-init/tmp/tmpy9fm0oqn//meta-data
2025-12-07 15:40:24,708 - util.py[DEBUG]: Reading from /run/cloud-init/tmp/tmpy9fm0oqn//vendor-data (quiet=False)
2025-12-07 15:40:24,709 - util.py[DEBUG]: Read 0 bytes from /run/cloud-init/tmp/tmpy9fm0oqn//vendor-data
2025-12-07 15:40:24,709 - util.py[DEBUG]: Reading from /run/cloud-init/tmp/tmpy9fm0oqn//network-config (quiet=False)
2025-12-07 15:40:24,709 - util.py[DEBUG]: Read 455 bytes from /run/cloud-init/tmp/tmpy9fm0oqn//network-config
2025-12-07 15:40:24,710 - subp.py[DEBUG]: Running command ['umount', '/run/cloud-init/tmp/tmpy9fm0oqn'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:24,714 - util.py[DEBUG]: Attempting to load yaml from string of length 54 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:24,715 - util.py[DEBUG]: Attempting to load yaml from string of length 455 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:24,717 - DataSourceNoCloud.py[DEBUG]: Using data from /dev/sr0
2025-12-07 15:40:24,718 - util.py[DEBUG]: Reading from /etc/hosts (quiet=False)
2025-12-07 15:40:24,718 - util.py[DEBUG]: Read 109 bytes from /etc/hosts
2025-12-07 15:40:24,719 - util.py[DEBUG]: Writing to /run/cloud-init/cloud-id-nocloud - wb: [644] 8 bytes
2025-12-07 15:40:24,720 - util.py[DEBUG]: Creating symbolic link from '/run/cloud-init/cloud-id' => '/run/cloud-init/cloud-id-nocloud'
2025-12-07 15:40:24,720 - atomic_helper.py[DEBUG]: Atomically writing to file /run/cloud-init/instance-data-sensitive.json (via temporary file /run/cloud-init/tmp1zwzhuuo) - w: [600] 4835 bytes/chars
2025-12-07 15:40:24,721 - atomic_helper.py[DEBUG]: Atomically writing to file /run/cloud-init/instance-data.json (via temporary file /run/cloud-init/tmpol3jd6fx) - w: [644] 1521 bytes/chars
2025-12-07 15:40:24,721 - handlers.py[DEBUG]: finish: init-local/search-NoCloud: SUCCESS: found local data from DataSourceNoCloud
2025-12-07 15:40:24,721 - stages.py[INFO]: Loaded datasource DataSourceNoCloud - DataSourceNoCloud [seed=/dev/sr0][dsmode=net]
2025-12-07 15:40:24,722 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg (quiet=False)
2025-12-07 15:40:24,722 - util.py[DEBUG]: Read 2796 bytes from /etc/cloud/cloud.cfg
2025-12-07 15:40:24,722 - util.py[DEBUG]: Attempting to load yaml from string of length 2796 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:24,732 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/05_logging.cfg (quiet=False)
2025-12-07 15:40:24,732 - util.py[DEBUG]: Read 2070 bytes from /etc/cloud/cloud.cfg.d/05_logging.cfg
2025-12-07 15:40:24,732 - util.py[DEBUG]: Attempting to load yaml from string of length 2070 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:24,735 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg (quiet=False)
2025-12-07 15:40:24,736 - util.py[DEBUG]: Read 309 bytes from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg
2025-12-07 15:40:24,736 - util.py[DEBUG]: Attempting to load yaml from string of length 309 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:24,738 - util.py[DEBUG]: Reading from /run/cloud-init/cloud.cfg (quiet=False)
2025-12-07 15:40:24,738 - util.py[DEBUG]: Read 35 bytes from /run/cloud-init/cloud.cfg
2025-12-07 15:40:24,738 - util.py[DEBUG]: Attempting to load yaml from string of length 35 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:24,739 - util.py[DEBUG]: Attempting to load yaml from string of length 0 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:24,739 - util.py[DEBUG]: loaded blob returned None, returning default.
2025-12-07 15:40:24,740 - util.py[DEBUG]: Attempting to remove /var/lib/cloud/instance
2025-12-07 15:40:24,740 - util.py[DEBUG]: Creating symbolic link from '/var/lib/cloud/instance' => '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184'
2025-12-07 15:40:24,741 - util.py[DEBUG]: Reading from /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/datasource (quiet=False)
2025-12-07 15:40:24,741 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/datasource - wb: [644] 65 bytes
2025-12-07 15:40:24,741 - util.py[DEBUG]: Writing to /var/lib/cloud/data/previous-datasource - wb: [644] 65 bytes
2025-12-07 15:40:24,742 - util.py[DEBUG]: Reading from /var/lib/cloud/data/instance-id (quiet=False)
2025-12-07 15:40:24,742 - stages.py[DEBUG]: previous iid found to be NO_PREVIOUS_INSTANCE_ID
2025-12-07 15:40:24,742 - util.py[DEBUG]: Writing to /var/lib/cloud/data/instance-id - wb: [644] 41 bytes
2025-12-07 15:40:24,742 - util.py[DEBUG]: Writing to /run/cloud-init/.instance-id - wb: [644] 41 bytes
2025-12-07 15:40:24,743 - util.py[DEBUG]: Writing to /var/lib/cloud/data/previous-instance-id - wb: [644] 24 bytes
2025-12-07 15:40:24,743 - util.py[DEBUG]: Writing to /var/lib/cloud/instance/obj.pkl - wb: [400] 6516 bytes
2025-12-07 15:40:24,744 - main.py[DEBUG]: [local] init will now be targeting instance id: 3a7b79c34864e435b2e39df1a836248be4942184. new=True
2025-12-07 15:40:24,744 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg (quiet=False)
2025-12-07 15:40:24,744 - util.py[DEBUG]: Read 2796 bytes from /etc/cloud/cloud.cfg
2025-12-07 15:40:24,744 - util.py[DEBUG]: Attempting to load yaml from string of length 2796 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:24,751 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/05_logging.cfg (quiet=False)
2025-12-07 15:40:24,751 - util.py[DEBUG]: Read 2070 bytes from /etc/cloud/cloud.cfg.d/05_logging.cfg
2025-12-07 15:40:24,752 - util.py[DEBUG]: Attempting to load yaml from string of length 2070 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:24,754 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg (quiet=False)
2025-12-07 15:40:24,754 - util.py[DEBUG]: Read 309 bytes from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg
2025-12-07 15:40:24,754 - util.py[DEBUG]: Attempting to load yaml from string of length 309 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:24,756 - util.py[DEBUG]: Reading from /run/cloud-init/cloud.cfg (quiet=False)
2025-12-07 15:40:24,756 - util.py[DEBUG]: Read 35 bytes from /run/cloud-init/cloud.cfg
2025-12-07 15:40:24,756 - util.py[DEBUG]: Attempting to load yaml from string of length 35 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:24,756 - util.py[DEBUG]: Attempting to load yaml from string of length 0 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:24,756 - util.py[DEBUG]: loaded blob returned None, returning default.
2025-12-07 15:40:24,757 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2025-12-07 15:40:24,758 - util.py[DEBUG]: Reading from /sys/class/net/ens18/address (quiet=False)
2025-12-07 15:40:24,758 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/ens18/address
2025-12-07 15:40:24,758 - util.py[DEBUG]: Reading from /sys/class/net/lo/address (quiet=False)
2025-12-07 15:40:24,758 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/lo/address
2025-12-07 15:40:24,758 - util.py[DEBUG]: Reading from /sys/class/net/ens18/address (quiet=False)
2025-12-07 15:40:24,758 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/ens18/address
2025-12-07 15:40:24,758 - util.py[DEBUG]: Reading from /sys/class/net/lo/address (quiet=False)
2025-12-07 15:40:24,759 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/lo/address
2025-12-07 15:40:24,759 - util.py[DEBUG]: Reading from /sys/class/net/eth0/device/device (quiet=False)
2025-12-07 15:40:24,759 - util.py[DEBUG]: Reading from /sys/class/net/ens18/addr_assign_type (quiet=False)
2025-12-07 15:40:24,759 - util.py[DEBUG]: Read 2 bytes from /sys/class/net/ens18/addr_assign_type
2025-12-07 15:40:24,759 - util.py[DEBUG]: Reading from /sys/class/net/ens18/uevent (quiet=False)
2025-12-07 15:40:24,759 - util.py[DEBUG]: Read 26 bytes from /sys/class/net/ens18/uevent
2025-12-07 15:40:24,759 - util.py[DEBUG]: Reading from /sys/class/net/ens18/address (quiet=False)
2025-12-07 15:40:24,759 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/ens18/address
2025-12-07 15:40:24,759 - __init__.py[DEBUG]: ovs-vsctl not in PATH; not detecting Open vSwitch interfaces
2025-12-07 15:40:24,760 - util.py[DEBUG]: Reading from /sys/class/net/ens18/device/device (quiet=False)
2025-12-07 15:40:24,760 - util.py[DEBUG]: Read 7 bytes from /sys/class/net/ens18/device/device
2025-12-07 15:40:24,760 - util.py[DEBUG]: Reading from /sys/class/net/lo/addr_assign_type (quiet=False)
2025-12-07 15:40:24,760 - util.py[DEBUG]: Read 2 bytes from /sys/class/net/lo/addr_assign_type
2025-12-07 15:40:24,760 - util.py[DEBUG]: Reading from /sys/class/net/lo/uevent (quiet=False)
2025-12-07 15:40:24,760 - util.py[DEBUG]: Read 23 bytes from /sys/class/net/lo/uevent
2025-12-07 15:40:24,760 - util.py[DEBUG]: Reading from /sys/class/net/lo/address (quiet=False)
2025-12-07 15:40:24,760 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/lo/address
2025-12-07 15:40:24,760 - util.py[DEBUG]: Reading from /sys/class/net/lo/device/device (quiet=False)
2025-12-07 15:40:24,760 - util.py[DEBUG]: Reading from /sys/class/net/ens18/type (quiet=False)
2025-12-07 15:40:24,760 - util.py[DEBUG]: Read 2 bytes from /sys/class/net/ens18/type
2025-12-07 15:40:24,760 - util.py[DEBUG]: Reading from /sys/class/net/lo/type (quiet=False)
2025-12-07 15:40:24,760 - util.py[DEBUG]: Read 4 bytes from /sys/class/net/lo/type
2025-12-07 15:40:24,760 - networking.py[DEBUG]: net: all expected physical devices present
2025-12-07 15:40:24,760 - stages.py[DEBUG]: applying net config names for {'version': 1, 'config': [{'type': 'physical', 'name': 'eth0', 'mac_address': '00:50:56:5e:95:7b', 'subnets': [{'type': 'static', 'address': '109.199.123.73', 'netmask': '255.255.240.0', 'gateway': '109.199.112.1'}, {'type': 'static6', 'address': '2a02:c207:2293:6396:0000:0000:0000:0001/64', 'gateway': 'fe80::1'}]}, {'type': 'nameserver', 'address': ['213.136.95.10', '213.136.95.11', '2a02:c207::1:53']}]}
2025-12-07 15:40:24,760 - util.py[DEBUG]: Reading from /sys/class/net/eth0/device/device (quiet=False)
2025-12-07 15:40:24,760 - util.py[DEBUG]: Reading from /sys/class/net/ens18/addr_assign_type (quiet=False)
2025-12-07 15:40:24,761 - util.py[DEBUG]: Read 2 bytes from /sys/class/net/ens18/addr_assign_type
2025-12-07 15:40:24,761 - util.py[DEBUG]: Reading from /sys/class/net/ens18/uevent (quiet=False)
2025-12-07 15:40:24,761 - util.py[DEBUG]: Read 26 bytes from /sys/class/net/ens18/uevent
2025-12-07 15:40:24,761 - util.py[DEBUG]: Reading from /sys/class/net/ens18/address (quiet=False)
2025-12-07 15:40:24,761 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/ens18/address
2025-12-07 15:40:24,761 - util.py[DEBUG]: Reading from /sys/class/net/ens18/device/device (quiet=False)
2025-12-07 15:40:24,761 - util.py[DEBUG]: Read 7 bytes from /sys/class/net/ens18/device/device
2025-12-07 15:40:24,761 - util.py[DEBUG]: Reading from /sys/class/net/lo/addr_assign_type (quiet=False)
2025-12-07 15:40:24,761 - util.py[DEBUG]: Read 2 bytes from /sys/class/net/lo/addr_assign_type
2025-12-07 15:40:24,761 - util.py[DEBUG]: Reading from /sys/class/net/lo/uevent (quiet=False)
2025-12-07 15:40:24,761 - util.py[DEBUG]: Read 23 bytes from /sys/class/net/lo/uevent
2025-12-07 15:40:24,761 - util.py[DEBUG]: Reading from /sys/class/net/lo/address (quiet=False)
2025-12-07 15:40:24,761 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/lo/address
2025-12-07 15:40:24,761 - util.py[DEBUG]: Reading from /sys/class/net/lo/device/device (quiet=False)
2025-12-07 15:40:24,761 - util.py[DEBUG]: Reading from /sys/class/net/ens18/operstate (quiet=False)
2025-12-07 15:40:24,761 - util.py[DEBUG]: Read 5 bytes from /sys/class/net/ens18/operstate
2025-12-07 15:40:24,761 - util.py[DEBUG]: Reading from /sys/class/net/lo/operstate (quiet=False)
2025-12-07 15:40:24,762 - util.py[DEBUG]: Read 8 bytes from /sys/class/net/lo/operstate
2025-12-07 15:40:24,762 - subp.py[DEBUG]: Running command ['ip', '-6', 'addr', 'show', 'permanent', 'scope', 'global'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:24,773 - subp.py[DEBUG]: Running command ['ip', '-4', 'addr', 'show'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:24,778 - __init__.py[DEBUG]: Detected interfaces {'ens18': {'downable': True, 'device_id': '0x0001', 'driver': 'virtio_net', 'mac': '00:50:56:5e:95:7b', 'name': 'ens18', 'up': False}, 'lo': {'downable': False, 'device_id': None, 'driver': None, 'mac': '00:00:00:00:00:00', 'name': 'lo', 'up': True}}
2025-12-07 15:40:24,778 - __init__.py[DEBUG]: achieving renaming of [['00:50:56:5e:95:7b', 'eth0', None, None]] with ops [('rename', '00:50:56:5e:95:7b', 'eth0', ('ens18', 'eth0'))]
2025-12-07 15:40:24,778 - subp.py[DEBUG]: Running command ['ip', 'link', 'set', 'ens18', 'name', 'eth0'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:24,804 - stages.py[INFO]: Applying network configuration from ds bringup=False: {'version': 1, 'config': [{'type': 'physical', 'name': 'eth0', 'mac_address': '00:50:56:5e:95:7b', 'subnets': [{'type': 'static', 'address': '109.199.123.73', 'netmask': '255.255.240.0', 'gateway': '109.199.112.1'}, {'type': 'static6', 'address': '2a02:c207:2293:6396:0000:0000:0000:0001/64', 'gateway': 'fe80::1'}]}, {'type': 'nameserver', 'address': ['213.136.95.10', '213.136.95.11', '2a02:c207::1:53']}]}
2025-12-07 15:40:24,804 - util.py[DEBUG]: Writing to /run/cloud-init/sem/apply_network_config.once - wb: [644] 24 bytes
2025-12-07 15:40:24,806 - __init__.py[DEBUG]: Selected renderer 'netplan' from priority list: None
2025-12-07 15:40:24,812 - subp.py[DEBUG]: Running command ['netplan', 'info'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:25,109 - util.py[DEBUG]: Attempting to load yaml from string of length 311 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:25,111 - util.py[DEBUG]: Writing to /etc/netplan/50-cloud-init.yaml - wb: [644] 812 bytes
2025-12-07 15:40:25,112 - subp.py[DEBUG]: Running command ['netplan', 'generate'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:25,498 - subp.py[DEBUG]: Running command ['udevadm', 'test-builtin', 'net_setup_link', '/sys/class/net/lo'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:25,505 - subp.py[DEBUG]: Running command ['udevadm', 'test-builtin', 'net_setup_link', '/sys/class/net/eth0'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:25,511 - __init__.py[DEBUG]: Not bringing up newly configured network interfaces
2025-12-07 15:40:25,511 - main.py[DEBUG]: [local] Exiting. datasource DataSourceNoCloud [seed=/dev/sr0][dsmode=net] not in local mode.
2025-12-07 15:40:25,511 - atomic_helper.py[DEBUG]: Atomically writing to file /var/lib/cloud/data/status.json (via temporary file /var/lib/cloud/data/tmpoljwr6gn) - w: [644] 518 bytes/chars
2025-12-07 15:40:25,516 - util.py[DEBUG]: Reading from /proc/uptime (quiet=False)
2025-12-07 15:40:25,517 - util.py[DEBUG]: Read 11 bytes from /proc/uptime
2025-12-07 15:40:25,517 - util.py[DEBUG]: cloud-init mode 'init' took 1.045 seconds (1.04)
2025-12-07 15:40:25,517 - handlers.py[DEBUG]: finish: init-local: SUCCESS: searching for local datasources
2025-12-07 15:40:40,409 - util.py[DEBUG]: Cloud-init v. 22.4.2 running 'init' at Sun, 07 Dec 2025 15:40:40 +0000. Up 19.23 seconds.
2025-12-07 15:40:40,409 - main.py[DEBUG]: No kernel command line url found.
2025-12-07 15:40:40,409 - main.py[DEBUG]: Closing stdin.
2025-12-07 15:40:40,410 - util.py[DEBUG]: Writing to /var/log/cloud-init.log - ab: [644] 0 bytes
2025-12-07 15:40:40,410 - util.py[DEBUG]: Changing the ownership of /var/log/cloud-init.log to 0:4
2025-12-07 15:40:40,410 - subp.py[DEBUG]: Running command ['ip', '--json', 'addr'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:40,414 - subp.py[DEBUG]: Running command ['ip', '-o', 'route', 'list'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:40,416 - subp.py[DEBUG]: Running command ['ip', '--oneline', '-6', 'route', 'list', 'table', 'all'] with allowed return codes [0, 1] (shell=False, capture=True)
2025-12-07 15:40:40,419 - handlers.py[DEBUG]: start: init-network/check-cache: attempting to read from cache [trust]
2025-12-07 15:40:40,419 - util.py[DEBUG]: Reading from /var/lib/cloud/instance/obj.pkl (quiet=False)
2025-12-07 15:40:40,419 - util.py[DEBUG]: Read 6516 bytes from /var/lib/cloud/instance/obj.pkl
2025-12-07 15:40:40,420 - util.py[DEBUG]: Reading from /run/cloud-init/.instance-id (quiet=False)
2025-12-07 15:40:40,421 - util.py[DEBUG]: Read 41 bytes from /run/cloud-init/.instance-id
2025-12-07 15:40:40,421 - stages.py[DEBUG]: restored from cache with run check: DataSourceNoCloud [seed=/dev/sr0][dsmode=net]
2025-12-07 15:40:40,421 - handlers.py[DEBUG]: finish: init-network/check-cache: SUCCESS: restored from cache with run check: DataSourceNoCloud [seed=/dev/sr0][dsmode=net]
2025-12-07 15:40:40,421 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg (quiet=False)
2025-12-07 15:40:40,421 - util.py[DEBUG]: Read 2796 bytes from /etc/cloud/cloud.cfg
2025-12-07 15:40:40,421 - util.py[DEBUG]: Attempting to load yaml from string of length 2796 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:40,426 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/05_logging.cfg (quiet=False)
2025-12-07 15:40:40,426 - util.py[DEBUG]: Read 2070 bytes from /etc/cloud/cloud.cfg.d/05_logging.cfg
2025-12-07 15:40:40,426 - util.py[DEBUG]: Attempting to load yaml from string of length 2070 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:40,428 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg (quiet=False)
2025-12-07 15:40:40,428 - util.py[DEBUG]: Read 309 bytes from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg
2025-12-07 15:40:40,428 - util.py[DEBUG]: Attempting to load yaml from string of length 309 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:40,429 - util.py[DEBUG]: Reading from /run/cloud-init/cloud.cfg (quiet=False)
2025-12-07 15:40:40,429 - util.py[DEBUG]: Read 35 bytes from /run/cloud-init/cloud.cfg
2025-12-07 15:40:40,430 - util.py[DEBUG]: Attempting to load yaml from string of length 35 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:40,430 - util.py[DEBUG]: Attempting to load yaml from string of length 0 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:40,430 - util.py[DEBUG]: loaded blob returned None, returning default.
2025-12-07 15:40:40,430 - util.py[DEBUG]: Attempting to remove /var/lib/cloud/instance
2025-12-07 15:40:40,430 - util.py[DEBUG]: Creating symbolic link from '/var/lib/cloud/instance' => '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184'
2025-12-07 15:40:40,431 - util.py[DEBUG]: Reading from /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/datasource (quiet=False)
2025-12-07 15:40:40,431 - util.py[DEBUG]: Read 65 bytes from /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/datasource
2025-12-07 15:40:40,431 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/datasource - wb: [644] 65 bytes
2025-12-07 15:40:40,431 - util.py[DEBUG]: Writing to /var/lib/cloud/data/previous-datasource - wb: [644] 65 bytes
2025-12-07 15:40:40,431 - util.py[DEBUG]: Reading from /var/lib/cloud/data/instance-id (quiet=False)
2025-12-07 15:40:40,431 - util.py[DEBUG]: Read 41 bytes from /var/lib/cloud/data/instance-id
2025-12-07 15:40:40,431 - stages.py[DEBUG]: previous iid found to be 3a7b79c34864e435b2e39df1a836248be4942184
2025-12-07 15:40:40,431 - util.py[DEBUG]: Writing to /var/lib/cloud/data/instance-id - wb: [644] 41 bytes
2025-12-07 15:40:40,432 - util.py[DEBUG]: Writing to /run/cloud-init/.instance-id - wb: [644] 41 bytes
2025-12-07 15:40:40,432 - util.py[DEBUG]: Writing to /var/lib/cloud/data/previous-instance-id - wb: [644] 41 bytes
2025-12-07 15:40:40,432 - util.py[DEBUG]: Writing to /var/lib/cloud/instance/obj.pkl - wb: [400] 6531 bytes
2025-12-07 15:40:40,432 - main.py[DEBUG]: [net] init will now be targeting instance id: 3a7b79c34864e435b2e39df1a836248be4942184. new=False
2025-12-07 15:40:40,433 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg (quiet=False)
2025-12-07 15:40:40,433 - util.py[DEBUG]: Read 2796 bytes from /etc/cloud/cloud.cfg
2025-12-07 15:40:40,433 - util.py[DEBUG]: Attempting to load yaml from string of length 2796 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:40,437 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/05_logging.cfg (quiet=False)
2025-12-07 15:40:40,437 - util.py[DEBUG]: Read 2070 bytes from /etc/cloud/cloud.cfg.d/05_logging.cfg
2025-12-07 15:40:40,437 - util.py[DEBUG]: Attempting to load yaml from string of length 2070 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:40,439 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg (quiet=False)
2025-12-07 15:40:40,439 - util.py[DEBUG]: Read 309 bytes from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg
2025-12-07 15:40:40,439 - util.py[DEBUG]: Attempting to load yaml from string of length 309 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:40,441 - util.py[DEBUG]: Reading from /run/cloud-init/cloud.cfg (quiet=False)
2025-12-07 15:40:40,441 - util.py[DEBUG]: Read 35 bytes from /run/cloud-init/cloud.cfg
2025-12-07 15:40:40,441 - util.py[DEBUG]: Attempting to load yaml from string of length 35 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:40,441 - util.py[DEBUG]: Attempting to load yaml from string of length 0 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:40,441 - util.py[DEBUG]: loaded blob returned None, returning default.
2025-12-07 15:40:40,442 - util.py[DEBUG]: Reading from /sys/class/net/lo/address (quiet=False)
2025-12-07 15:40:40,442 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/lo/address
2025-12-07 15:40:40,442 - util.py[DEBUG]: Reading from /sys/class/net/eth0/address (quiet=False)
2025-12-07 15:40:40,442 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/eth0/address
2025-12-07 15:40:40,443 - stages.py[DEBUG]: Allowed events: {<EventScope.NETWORK: 'network'>: {<EventType.BOOT_NEW_INSTANCE: 'boot-new-instance'>}}
2025-12-07 15:40:40,443 - stages.py[DEBUG]: Event Denied: scopes=['network'] EventType=boot-legacy
2025-12-07 15:40:40,443 - stages.py[DEBUG]: No network config applied. Neither a new instance nor datasource network update allowed
2025-12-07 15:40:40,443 - stages.py[DEBUG]: applying net config names for {'version': 1, 'config': [{'type': 'physical', 'name': 'eth0', 'mac_address': '00:50:56:5e:95:7b', 'subnets': [{'type': 'static', 'address': '109.199.123.73', 'netmask': '255.255.240.0', 'gateway': '109.199.112.1'}, {'type': 'static6', 'address': '2a02:c207:2293:6396:0000:0000:0000:0001/64', 'gateway': 'fe80::1'}]}, {'type': 'nameserver', 'address': ['213.136.95.10', '213.136.95.11', '2a02:c207::1:53']}]}
2025-12-07 15:40:40,443 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2025-12-07 15:40:40,443 - util.py[DEBUG]: Reading from /sys/class/net/eth0/device/device (quiet=False)
2025-12-07 15:40:40,443 - util.py[DEBUG]: Read 7 bytes from /sys/class/net/eth0/device/device
2025-12-07 15:40:40,443 - util.py[DEBUG]: Reading from /sys/class/net/lo/addr_assign_type (quiet=False)
2025-12-07 15:40:40,444 - util.py[DEBUG]: Read 2 bytes from /sys/class/net/lo/addr_assign_type
2025-12-07 15:40:40,444 - util.py[DEBUG]: Reading from /sys/class/net/lo/uevent (quiet=False)
2025-12-07 15:40:40,444 - util.py[DEBUG]: Read 23 bytes from /sys/class/net/lo/uevent
2025-12-07 15:40:40,444 - util.py[DEBUG]: Reading from /sys/class/net/lo/address (quiet=False)
2025-12-07 15:40:40,444 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/lo/address
2025-12-07 15:40:40,444 - __init__.py[DEBUG]: ovs-vsctl not in PATH; not detecting Open vSwitch interfaces
2025-12-07 15:40:40,444 - util.py[DEBUG]: Reading from /sys/class/net/lo/device/device (quiet=False)
2025-12-07 15:40:40,444 - util.py[DEBUG]: Reading from /sys/class/net/eth0/addr_assign_type (quiet=False)
2025-12-07 15:40:40,444 - util.py[DEBUG]: Read 2 bytes from /sys/class/net/eth0/addr_assign_type
2025-12-07 15:40:40,444 - util.py[DEBUG]: Reading from /sys/class/net/eth0/uevent (quiet=False)
2025-12-07 15:40:40,444 - util.py[DEBUG]: Read 25 bytes from /sys/class/net/eth0/uevent
2025-12-07 15:40:40,444 - util.py[DEBUG]: Reading from /sys/class/net/eth0/address (quiet=False)
2025-12-07 15:40:40,444 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/eth0/address
2025-12-07 15:40:40,444 - util.py[DEBUG]: Reading from /sys/class/net/eth0/device/device (quiet=False)
2025-12-07 15:40:40,444 - util.py[DEBUG]: Read 7 bytes from /sys/class/net/eth0/device/device
2025-12-07 15:40:40,444 - util.py[DEBUG]: Reading from /sys/class/net/lo/operstate (quiet=False)
2025-12-07 15:40:40,444 - util.py[DEBUG]: Read 8 bytes from /sys/class/net/lo/operstate
2025-12-07 15:40:40,444 - util.py[DEBUG]: Reading from /sys/class/net/eth0/operstate (quiet=False)
2025-12-07 15:40:40,444 - util.py[DEBUG]: Read 3 bytes from /sys/class/net/eth0/operstate
2025-12-07 15:40:40,444 - subp.py[DEBUG]: Running command ['ip', '-6', 'addr', 'show', 'permanent', 'scope', 'global'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:40,447 - subp.py[DEBUG]: Running command ['ip', '-4', 'addr', 'show'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:40,450 - __init__.py[DEBUG]: Detected interfaces {'lo': {'downable': False, 'device_id': None, 'driver': None, 'mac': '00:00:00:00:00:00', 'name': 'lo', 'up': True}, 'eth0': {'downable': False, 'device_id': '0x0001', 'driver': 'virtio_net', 'mac': '00:50:56:5e:95:7b', 'name': 'eth0', 'up': True}}
2025-12-07 15:40:40,450 - __init__.py[DEBUG]: no work necessary for renaming of [['00:50:56:5e:95:7b', 'eth0', 'virtio_net', '0x0001']]
2025-12-07 15:40:40,450 - handlers.py[DEBUG]: start: init-network/setup-datasource: setting up datasource
2025-12-07 15:40:40,450 - handlers.py[DEBUG]: finish: init-network/setup-datasource: SUCCESS: setting up datasource
2025-12-07 15:40:40,450 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/user-data.txt - wb: [600] 1714 bytes
2025-12-07 15:40:40,451 - util.py[DEBUG]: Attempting to load yaml from string of length 1714 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:40,456 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/user-data.txt.i - wb: [600] 2019 bytes
2025-12-07 15:40:40,456 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/vendor-data.txt - wb: [600] 0 bytes
2025-12-07 15:40:40,457 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/vendor-data.txt.i - wb: [600] 308 bytes
2025-12-07 15:40:40,457 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/vendor-data2.txt - wb: [600] 0 bytes
2025-12-07 15:40:40,457 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/vendor-data2.txt.i - wb: [600] 308 bytes
2025-12-07 15:40:40,458 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/consume_data - wb: [644] 24 bytes
2025-12-07 15:40:40,458 - helpers.py[DEBUG]: Running consume_data using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/consume_data'>)
2025-12-07 15:40:40,458 - handlers.py[DEBUG]: start: init-network/consume-user-data: reading and applying user-data
2025-12-07 15:40:40,459 - stages.py[DEBUG]: Added default handler for {'text/cloud-config', 'text/cloud-config-jsonp'} from CloudConfigPartHandler: [['text/cloud-config', 'text/cloud-config-jsonp']]
2025-12-07 15:40:40,459 - stages.py[DEBUG]: Added default handler for {'text/x-shellscript'} from ShellScriptPartHandler: [['text/x-shellscript']]
2025-12-07 15:40:40,459 - stages.py[DEBUG]: Added default handler for {'text/x-shellscript-per-boot'} from ShellScriptByFreqPartHandler: [['text/x-shellscript-per-boot']]
2025-12-07 15:40:40,459 - stages.py[DEBUG]: Added default handler for {'text/x-shellscript-per-instance'} from ShellScriptByFreqPartHandler: [['text/x-shellscript-per-instance']]
2025-12-07 15:40:40,459 - stages.py[DEBUG]: Added default handler for {'text/x-shellscript-per-once'} from ShellScriptByFreqPartHandler: [['text/x-shellscript-per-once']]
2025-12-07 15:40:40,459 - stages.py[DEBUG]: Added default handler for {'text/cloud-boothook'} from BootHookPartHandler: [['text/cloud-boothook']]
2025-12-07 15:40:40,459 - stages.py[DEBUG]: Added default handler for {'text/jinja2'} from JinjaTemplatePartHandler: [['text/jinja2']]
2025-12-07 15:40:40,459 - __init__.py[DEBUG]: Calling handler CloudConfigPartHandler: [['text/cloud-config', 'text/cloud-config-jsonp']] (__begin__, None, 3) with frequency once-per-instance
2025-12-07 15:40:40,459 - __init__.py[DEBUG]: Calling handler ShellScriptPartHandler: [['text/x-shellscript']] (__begin__, None, 2) with frequency once-per-instance
2025-12-07 15:40:40,459 - __init__.py[DEBUG]: Calling handler ShellScriptByFreqPartHandler: [['text/x-shellscript-per-boot']] (__begin__, None, 2) with frequency once-per-instance
2025-12-07 15:40:40,459 - __init__.py[DEBUG]: Calling handler ShellScriptByFreqPartHandler: [['text/x-shellscript-per-instance']] (__begin__, None, 2) with frequency once-per-instance
2025-12-07 15:40:40,459 - __init__.py[DEBUG]: Calling handler ShellScriptByFreqPartHandler: [['text/x-shellscript-per-once']] (__begin__, None, 2) with frequency once-per-instance
2025-12-07 15:40:40,459 - __init__.py[DEBUG]: Calling handler BootHookPartHandler: [['text/cloud-boothook']] (__begin__, None, 2) with frequency once-per-instance
2025-12-07 15:40:40,459 - __init__.py[DEBUG]: Calling handler JinjaTemplatePartHandler: [['text/jinja2']] (__begin__, None, 3) with frequency once-per-instance
2025-12-07 15:40:40,459 - __init__.py[DEBUG]: {'MIME-Version': '1.0', 'Content-Type': 'text/cloud-config', 'Content-Disposition': 'attachment; filename="part-001"'}
2025-12-07 15:40:40,459 - __init__.py[DEBUG]: Calling handler CloudConfigPartHandler: [['text/cloud-config', 'text/cloud-config-jsonp']] (text/cloud-config, part-001, 3) with frequency once-per-instance
2025-12-07 15:40:40,459 - util.py[DEBUG]: Attempting to load yaml from string of length 1714 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:40,463 - cloud_config.py[DEBUG]: Merging by applying [('dict', ['replace']), ('list', []), ('str', [])]
2025-12-07 15:40:40,463 - __init__.py[DEBUG]: Calling handler CloudConfigPartHandler: [['text/cloud-config', 'text/cloud-config-jsonp']] (__end__, None, 3) with frequency once-per-instance
2025-12-07 15:40:40,465 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/cloud-config.txt - wb: [600] 1742 bytes
2025-12-07 15:40:40,465 - __init__.py[DEBUG]: Calling handler ShellScriptPartHandler: [['text/x-shellscript']] (__end__, None, 2) with frequency once-per-instance
2025-12-07 15:40:40,466 - __init__.py[DEBUG]: Calling handler ShellScriptByFreqPartHandler: [['text/x-shellscript-per-boot']] (__end__, None, 2) with frequency once-per-instance
2025-12-07 15:40:40,466 - __init__.py[DEBUG]: Calling handler ShellScriptByFreqPartHandler: [['text/x-shellscript-per-instance']] (__end__, None, 2) with frequency once-per-instance
2025-12-07 15:40:40,466 - __init__.py[DEBUG]: Calling handler ShellScriptByFreqPartHandler: [['text/x-shellscript-per-once']] (__end__, None, 2) with frequency once-per-instance
2025-12-07 15:40:40,466 - __init__.py[DEBUG]: Calling handler BootHookPartHandler: [['text/cloud-boothook']] (__end__, None, 2) with frequency once-per-instance
2025-12-07 15:40:40,466 - __init__.py[DEBUG]: Calling handler JinjaTemplatePartHandler: [['text/jinja2']] (__end__, None, 3) with frequency once-per-instance
2025-12-07 15:40:40,466 - handlers.py[DEBUG]: finish: init-network/consume-user-data: SUCCESS: reading and applying user-data
2025-12-07 15:40:40,466 - handlers.py[DEBUG]: start: init-network/consume-vendor-data: reading and applying vendor-data
2025-12-07 15:40:40,466 - stages.py[DEBUG]: no vendordata from datasource
2025-12-07 15:40:40,466 - handlers.py[DEBUG]: finish: init-network/consume-vendor-data: SUCCESS: reading and applying vendor-data
2025-12-07 15:40:40,466 - handlers.py[DEBUG]: start: init-network/consume-vendor-data2: reading and applying vendor-data2
2025-12-07 15:40:40,466 - stages.py[DEBUG]: no vendordata2 from datasource
2025-12-07 15:40:40,466 - handlers.py[DEBUG]: finish: init-network/consume-vendor-data2: SUCCESS: reading and applying vendor-data2
2025-12-07 15:40:40,466 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg (quiet=False)
2025-12-07 15:40:40,466 - util.py[DEBUG]: Read 2796 bytes from /etc/cloud/cloud.cfg
2025-12-07 15:40:40,466 - util.py[DEBUG]: Attempting to load yaml from string of length 2796 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:40,471 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/05_logging.cfg (quiet=False)
2025-12-07 15:40:40,471 - util.py[DEBUG]: Read 2070 bytes from /etc/cloud/cloud.cfg.d/05_logging.cfg
2025-12-07 15:40:40,471 - util.py[DEBUG]: Attempting to load yaml from string of length 2070 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:40,474 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg (quiet=False)
2025-12-07 15:40:40,475 - util.py[DEBUG]: Read 309 bytes from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg
2025-12-07 15:40:40,475 - util.py[DEBUG]: Attempting to load yaml from string of length 309 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:40,476 - util.py[DEBUG]: Reading from /run/cloud-init/cloud.cfg (quiet=False)
2025-12-07 15:40:40,476 - util.py[DEBUG]: Read 35 bytes from /run/cloud-init/cloud.cfg
2025-12-07 15:40:40,476 - util.py[DEBUG]: Attempting to load yaml from string of length 35 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:40,476 - util.py[DEBUG]: Attempting to load yaml from string of length 0 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:40,476 - util.py[DEBUG]: loaded blob returned None, returning default.
2025-12-07 15:40:40,477 - util.py[DEBUG]: Reading from /var/lib/cloud/instance/cloud-config.txt (quiet=False)
2025-12-07 15:40:40,477 - util.py[DEBUG]: Read 1742 bytes from /var/lib/cloud/instance/cloud-config.txt
2025-12-07 15:40:40,477 - util.py[DEBUG]: Attempting to load yaml from string of length 1742 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:40,480 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:40,480 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:40,488 - util.py[DEBUG]: Reading from /var/lib/cloud/instance/cloud-config.txt (quiet=False)
2025-12-07 15:40:40,488 - util.py[DEBUG]: Read 1742 bytes from /var/lib/cloud/instance/cloud-config.txt
2025-12-07 15:40:40,488 - util.py[DEBUG]: Attempting to load yaml from string of length 1742 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:40,493 - handlers.py[DEBUG]: start: init-network/activate-datasource: activating datasource
2025-12-07 15:40:40,494 - util.py[DEBUG]: Writing to /var/lib/cloud/instance/obj.pkl - wb: [400] 10395 bytes
2025-12-07 15:40:40,494 - handlers.py[DEBUG]: finish: init-network/activate-datasource: SUCCESS: activating datasource
2025-12-07 15:40:40,495 - main.py[DEBUG]: no di_report found in config.
2025-12-07 15:40:40,496 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:40,496 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:40,499 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:40,499 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:40,501 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:40,502 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:40,504 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:40,504 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:40,506 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:40,506 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:40,508 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:40,508 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:40,510 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:40,510 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:40,512 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:40,512 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:40,514 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:40,514 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:40,516 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:40,516 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:40,517 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:40,518 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:40,519 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:40,520 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:40,522 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:40,522 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:40,525 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:40,525 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:40,527 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2025-12-07 15:40:40,528 - modules.py[INFO]: Skipping modules 'disk_setup,ca-certs,rsyslog' because no applicable config is provided.
2025-12-07 15:40:40,529 - modules.py[DEBUG]: Running module migrator (<module 'cloudinit.config.cc_migrator' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_migrator.py'>) with frequency always
2025-12-07 15:40:40,529 - handlers.py[DEBUG]: start: init-network/config-migrator: running config-migrator with frequency always
2025-12-07 15:40:40,529 - helpers.py[DEBUG]: Running config-migrator using lock (<cloudinit.helpers.DummyLock object at 0x7faee79943d0>)
2025-12-07 15:40:40,529 - cc_migrator.py[DEBUG]: Migrated 0 semaphore files to there canonicalized names
2025-12-07 15:40:40,529 - handlers.py[DEBUG]: finish: init-network/config-migrator: SUCCESS: config-migrator ran successfully
2025-12-07 15:40:40,529 - modules.py[DEBUG]: Running module seed_random (<module 'cloudinit.config.cc_seed_random' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_seed_random.py'>) with frequency once-per-instance
2025-12-07 15:40:40,529 - handlers.py[DEBUG]: start: init-network/config-seed_random: running config-seed_random with frequency once-per-instance
2025-12-07 15:40:40,530 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_seed_random - wb: [644] 24 bytes
2025-12-07 15:40:40,530 - helpers.py[DEBUG]: Running config-seed_random using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_seed_random'>)
2025-12-07 15:40:40,530 - cc_seed_random.py[DEBUG]: no command provided
2025-12-07 15:40:40,530 - handlers.py[DEBUG]: finish: init-network/config-seed_random: SUCCESS: config-seed_random ran successfully
2025-12-07 15:40:40,530 - modules.py[DEBUG]: Running module bootcmd (<module 'cloudinit.config.cc_bootcmd' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_bootcmd.py'>) with frequency always
2025-12-07 15:40:40,530 - handlers.py[DEBUG]: start: init-network/config-bootcmd: running config-bootcmd with frequency always
2025-12-07 15:40:40,531 - helpers.py[DEBUG]: Running config-bootcmd using lock (<cloudinit.helpers.DummyLock object at 0x7faee79979d0>)
2025-12-07 15:40:40,531 - util.py[DEBUG]: Shellified 3 commands.
2025-12-07 15:40:40,531 - subp.py[DEBUG]: Running command ['/bin/sh', '/run/cloud-init/tmp/tmpa6s9q4db.sh'] with allowed return codes [0] (shell=False, capture=False)
2025-12-07 15:40:40,559 - util.py[WARNING]: Failed to run bootcmd module bootcmd
2025-12-07 15:40:40,559 - util.py[DEBUG]: Failed to run bootcmd module bootcmd
Traceback (most recent call last):
  File "/usr/lib/python3/dist-packages/cloudinit/config/cc_bootcmd.py", line 91, in handle
    subp.subp(cmd, env=env, capture=False)
  File "/usr/lib/python3/dist-packages/cloudinit/subp.py", line 335, in subp
    raise ProcessExecutionError(
cloudinit.subp.ProcessExecutionError: Unexpected error while running command.
Command: ['/bin/sh', '/run/cloud-init/tmp/tmpa6s9q4db.sh']
Exit code: 1
Reason: -
Stdout: -
Stderr: -
2025-12-07 15:40:40,561 - handlers.py[DEBUG]: finish: init-network/config-bootcmd: FAIL: running config-bootcmd with frequency always
2025-12-07 15:40:40,561 - util.py[WARNING]: Running module bootcmd (<module 'cloudinit.config.cc_bootcmd' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_bootcmd.py'>) failed
2025-12-07 15:40:40,561 - util.py[DEBUG]: Running module bootcmd (<module 'cloudinit.config.cc_bootcmd' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_bootcmd.py'>) failed
Traceback (most recent call last):
  File "/usr/lib/python3/dist-packages/cloudinit/config/modules.py", line 246, in _run_modules
    ran, _r = cc.run(
              ^^^^^^^
  File "/usr/lib/python3/dist-packages/cloudinit/cloud.py", line 67, in run
    return self._runners.run(name, functor, args, freq, clear_on_fail)
           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/lib/python3/dist-packages/cloudinit/helpers.py", line 185, in run
    results = functor(*args)
              ^^^^^^^^^^^^^^
  File "/usr/lib/python3/dist-packages/cloudinit/config/cc_bootcmd.py", line 91, in handle
    subp.subp(cmd, env=env, capture=False)
  File "/usr/lib/python3/dist-packages/cloudinit/subp.py", line 335, in subp
    raise ProcessExecutionError(
cloudinit.subp.ProcessExecutionError: Unexpected error while running command.
Command: ['/bin/sh', '/run/cloud-init/tmp/tmpa6s9q4db.sh']
Exit code: 1
Reason: -
Stdout: -
Stderr: -
2025-12-07 15:40:40,565 - modules.py[DEBUG]: Running module write-files (<module 'cloudinit.config.cc_write_files' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_write_files.py'>) with frequency once-per-instance
2025-12-07 15:40:40,566 - handlers.py[DEBUG]: start: init-network/config-write-files: running config-write-files with frequency once-per-instance
2025-12-07 15:40:40,566 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_write_files - wb: [644] 24 bytes
2025-12-07 15:40:40,566 - helpers.py[DEBUG]: Running config-write-files using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_write_files'>)
2025-12-07 15:40:40,567 - util.py[DEBUG]: Writing to /etc/cron.hourly/free - wb: [755] 44 bytes
2025-12-07 15:40:40,567 - util.py[DEBUG]: Changing the ownership of /etc/cron.hourly/free to 0:0
2025-12-07 15:40:40,567 - util.py[DEBUG]: Writing to /etc/cron.hourly/fstrim - wb: [755] 19 bytes
2025-12-07 15:40:40,567 - util.py[DEBUG]: Changing the ownership of /etc/cron.hourly/fstrim to 0:0
2025-12-07 15:40:40,567 - util.py[DEBUG]: Writing to /etc/sysctl.d/10-panic.conf - wb: [644] 18 bytes
2025-12-07 15:40:40,567 - util.py[DEBUG]: Changing the ownership of /etc/sysctl.d/10-panic.conf to 0:0
2025-12-07 15:40:40,568 - util.py[DEBUG]: Writing to /etc/cron.d/staticroute - wb: [644] 263 bytes
2025-12-07 15:40:40,568 - util.py[DEBUG]: Changing the ownership of /etc/cron.d/staticroute to 0:0
2025-12-07 15:40:40,568 - util.py[DEBUG]: Writing to /etc/cloud/cloud.cfg.d/99-ssh.cfg - wb: [644] 48 bytes
2025-12-07 15:40:40,569 - util.py[DEBUG]: Changing the ownership of /etc/cloud/cloud.cfg.d/99-ssh.cfg to 0:0
2025-12-07 15:40:40,569 - util.py[DEBUG]: Writing to /etc/motd - wb: [644] 302 bytes
2025-12-07 15:40:40,569 - util.py[DEBUG]: Changing the ownership of /etc/motd to 0:0
2025-12-07 15:40:40,569 - handlers.py[DEBUG]: finish: init-network/config-write-files: SUCCESS: config-write-files ran successfully
2025-12-07 15:40:40,569 - modules.py[DEBUG]: Running module growpart (<module 'cloudinit.config.cc_growpart' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_growpart.py'>) with frequency always
2025-12-07 15:40:40,569 - handlers.py[DEBUG]: start: init-network/config-growpart: running config-growpart with frequency always
2025-12-07 15:40:40,570 - helpers.py[DEBUG]: Running config-growpart using lock (<cloudinit.helpers.DummyLock object at 0x7faee79b6490>)
2025-12-07 15:40:40,570 - cc_growpart.py[DEBUG]: No 'growpart' entry in cfg.  Using default: {'mode': 'auto', 'devices': ['/'], 'ignore_growroot_disabled': False}
2025-12-07 15:40:40,570 - subp.py[DEBUG]: Running command ['growpart', '--help'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:40,577 - util.py[DEBUG]: Reading from /proc/497/mountinfo (quiet=False)
2025-12-07 15:40:40,577 - util.py[DEBUG]: Read 2609 bytes from /proc/497/mountinfo
2025-12-07 15:40:40,578 - util.py[DEBUG]: Reading from /sys/class/block/sda1/partition (quiet=False)
2025-12-07 15:40:40,578 - util.py[DEBUG]: Read 2 bytes from /sys/class/block/sda1/partition
2025-12-07 15:40:40,578 - util.py[DEBUG]: Reading from /sys/devices/pci0000:00/0000:00:05.0/virtio1/host0/target0:0:0/0:0:0:0/block/sda/dev (quiet=False)
2025-12-07 15:40:40,578 - util.py[DEBUG]: Read 4 bytes from /sys/devices/pci0000:00/0000:00:05.0/virtio1/host0/target0:0:0/0:0:0:0/block/sda/dev
2025-12-07 15:40:40,578 - util.py[DEBUG]: Reading from /proc/497/mountinfo (quiet=False)
2025-12-07 15:40:40,579 - util.py[DEBUG]: Read 2609 bytes from /proc/497/mountinfo
2025-12-07 15:40:40,579 - util.py[DEBUG]: Reading from /proc/497/mountinfo (quiet=False)
2025-12-07 15:40:40,579 - util.py[DEBUG]: Read 2609 bytes from /proc/497/mountinfo
2025-12-07 15:40:40,579 - subp.py[DEBUG]: Running command ['growpart', '--dry-run', '/dev/sda', '1'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:40,637 - util.py[DEBUG]: resize_devices took 0.060 seconds
2025-12-07 15:40:40,637 - cc_growpart.py[DEBUG]: '/' NOCHANGE: no change necessary (/dev/sda, 1)
2025-12-07 15:40:40,638 - handlers.py[DEBUG]: finish: init-network/config-growpart: SUCCESS: config-growpart ran successfully
2025-12-07 15:40:40,638 - modules.py[DEBUG]: Running module resizefs (<module 'cloudinit.config.cc_resizefs' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_resizefs.py'>) with frequency always
2025-12-07 15:40:40,638 - handlers.py[DEBUG]: start: init-network/config-resizefs: running config-resizefs with frequency always
2025-12-07 15:40:40,638 - helpers.py[DEBUG]: Running config-resizefs using lock (<cloudinit.helpers.DummyLock object at 0x7faee79b6810>)
2025-12-07 15:40:40,638 - util.py[DEBUG]: Reading from /proc/497/mountinfo (quiet=False)
2025-12-07 15:40:40,639 - util.py[DEBUG]: Read 2609 bytes from /proc/497/mountinfo
2025-12-07 15:40:40,639 - cc_resizefs.py[DEBUG]: resize_info: dev=/dev/sda1 mnt_point=/ path=/
2025-12-07 15:40:40,639 - cc_resizefs.py[DEBUG]: Resizing / (ext4) using resize2fs /dev/sda1
2025-12-07 15:40:40,639 - subp.py[DEBUG]: Running command ('resize2fs', '/dev/sda1') with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:40,644 - util.py[DEBUG]: Resizing took 0.005 seconds
2025-12-07 15:40:40,644 - cc_resizefs.py[DEBUG]: Resized root filesystem (type=ext4, val=True)
2025-12-07 15:40:40,644 - handlers.py[DEBUG]: finish: init-network/config-resizefs: SUCCESS: config-resizefs ran successfully
2025-12-07 15:40:40,644 - modules.py[DEBUG]: Running module mounts (<module 'cloudinit.config.cc_mounts' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_mounts.py'>) with frequency once-per-instance
2025-12-07 15:40:40,644 - handlers.py[DEBUG]: start: init-network/config-mounts: running config-mounts with frequency once-per-instance
2025-12-07 15:40:40,645 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_mounts - wb: [644] 23 bytes
2025-12-07 15:40:40,645 - helpers.py[DEBUG]: Running config-mounts using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_mounts'>)
2025-12-07 15:40:40,645 - cc_mounts.py[DEBUG]: mounts configuration is []
2025-12-07 15:40:40,645 - util.py[DEBUG]: Reading from /etc/fstab (quiet=False)
2025-12-07 15:40:40,645 - util.py[DEBUG]: Read 177 bytes from /etc/fstab
2025-12-07 15:40:40,645 - cc_mounts.py[DEBUG]: Attempting to determine the real name of ephemeral0
2025-12-07 15:40:40,645 - cc_mounts.py[DEBUG]: changed default device ephemeral0 => None
2025-12-07 15:40:40,645 - cc_mounts.py[DEBUG]: Ignoring nonexistent default named mount ephemeral0
2025-12-07 15:40:40,645 - cc_mounts.py[DEBUG]: Attempting to determine the real name of swap
2025-12-07 15:40:40,646 - cc_mounts.py[DEBUG]: changed default device swap => None
2025-12-07 15:40:40,646 - cc_mounts.py[DEBUG]: Ignoring nonexistent default named mount swap
2025-12-07 15:40:40,646 - cc_mounts.py[DEBUG]: no need to setup swap
2025-12-07 15:40:40,646 - cc_mounts.py[DEBUG]: No modifications to fstab needed
2025-12-07 15:40:40,646 - handlers.py[DEBUG]: finish: init-network/config-mounts: SUCCESS: config-mounts ran successfully
2025-12-07 15:40:40,646 - modules.py[DEBUG]: Running module set_hostname (<module 'cloudinit.config.cc_set_hostname' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_set_hostname.py'>) with frequency once-per-instance
2025-12-07 15:40:40,646 - handlers.py[DEBUG]: start: init-network/config-set_hostname: running config-set_hostname with frequency once-per-instance
2025-12-07 15:40:40,646 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_set_hostname - wb: [644] 24 bytes
2025-12-07 15:40:40,646 - helpers.py[DEBUG]: Running config-set_hostname using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_set_hostname'>)
2025-12-07 15:40:40,646 - cc_set_hostname.py[DEBUG]: Setting the hostname to vmi2936396.contaboserver.net (vmi2936396)
2025-12-07 15:40:40,646 - util.py[DEBUG]: Reading from /etc/hostname (quiet=False)
2025-12-07 15:40:40,647 - util.py[DEBUG]: Read 0 bytes from /etc/hostname
2025-12-07 15:40:40,647 - util.py[DEBUG]: Writing to /etc/hostname - wb: [644] 11 bytes
2025-12-07 15:40:40,647 - __init__.py[DEBUG]: Non-persistently setting the system hostname to vmi2936396
2025-12-07 15:40:40,647 - subp.py[DEBUG]: Running command ['hostname', 'vmi2936396'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:40,649 - atomic_helper.py[DEBUG]: Atomically writing to file /var/lib/cloud/data/set-hostname (via temporary file /var/lib/cloud/data/tmpqcoe114t) - w: [644] 71 bytes/chars
2025-12-07 15:40:40,649 - handlers.py[DEBUG]: finish: init-network/config-set_hostname: SUCCESS: config-set_hostname ran successfully
2025-12-07 15:40:40,649 - modules.py[DEBUG]: Running module update_hostname (<module 'cloudinit.config.cc_update_hostname' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_update_hostname.py'>) with frequency always
2025-12-07 15:40:40,650 - handlers.py[DEBUG]: start: init-network/config-update_hostname: running config-update_hostname with frequency always
2025-12-07 15:40:40,650 - helpers.py[DEBUG]: Running config-update_hostname using lock (<cloudinit.helpers.DummyLock object at 0x7faee79b56d0>)
2025-12-07 15:40:40,650 - cc_update_hostname.py[DEBUG]: Updating hostname to vmi2936396.contaboserver.net (vmi2936396)
2025-12-07 15:40:40,650 - util.py[DEBUG]: Reading from /etc/hostname (quiet=False)
2025-12-07 15:40:40,650 - util.py[DEBUG]: Read 11 bytes from /etc/hostname
2025-12-07 15:40:40,650 - __init__.py[DEBUG]: Attempting to update hostname to vmi2936396 in 1 files
2025-12-07 15:40:40,650 - util.py[DEBUG]: Reading from /var/lib/cloud/data/previous-hostname (quiet=False)
2025-12-07 15:40:40,650 - util.py[DEBUG]: Writing to /var/lib/cloud/data/previous-hostname - wb: [644] 11 bytes
2025-12-07 15:40:40,650 - handlers.py[DEBUG]: finish: init-network/config-update_hostname: SUCCESS: config-update_hostname ran successfully
2025-12-07 15:40:40,650 - modules.py[DEBUG]: Running module update_etc_hosts (<module 'cloudinit.config.cc_update_etc_hosts' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_update_etc_hosts.py'>) with frequency always
2025-12-07 15:40:40,651 - handlers.py[DEBUG]: start: init-network/config-update_etc_hosts: running config-update_etc_hosts with frequency always
2025-12-07 15:40:40,651 - helpers.py[DEBUG]: Running config-update_etc_hosts using lock (<cloudinit.helpers.DummyLock object at 0x7faee79b7650>)
2025-12-07 15:40:40,651 - util.py[DEBUG]: Reading from /etc/cloud/templates/hosts.debian.tmpl (quiet=False)
2025-12-07 15:40:40,651 - util.py[DEBUG]: Read 845 bytes from /etc/cloud/templates/hosts.debian.tmpl
2025-12-07 15:40:40,651 - templater.py[DEBUG]: Rendering content of '/etc/cloud/templates/hosts.debian.tmpl' using renderer jinja
2025-12-07 15:40:40,656 - util.py[DEBUG]: Writing to /etc/hosts - wb: [644] 565 bytes
2025-12-07 15:40:40,658 - handlers.py[DEBUG]: finish: init-network/config-update_etc_hosts: SUCCESS: config-update_etc_hosts ran successfully
2025-12-07 15:40:40,658 - modules.py[DEBUG]: Running module users-groups (<module 'cloudinit.config.cc_users_groups' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_users_groups.py'>) with frequency once-per-instance
2025-12-07 15:40:40,658 - handlers.py[DEBUG]: start: init-network/config-users-groups: running config-users-groups with frequency once-per-instance
2025-12-07 15:40:40,658 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_users_groups - wb: [644] 22 bytes
2025-12-07 15:40:40,658 - helpers.py[DEBUG]: Running config-users-groups using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_users_groups'>)
2025-12-07 15:40:40,658 - ug_util.py[WARNING]: DEPRECATED: 'user' of type string is deprecated and will be removed in a future release. Use 'users' list instead.
2025-12-07 15:40:40,659 - __init__.py[INFO]: User root already exists, skipping.
2025-12-07 15:40:40,659 - subp.py[DEBUG]: Running command ['passwd', '-l', 'root'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:40,675 - util.py[DEBUG]: Reading from /etc/sudoers (quiet=False)
2025-12-07 15:40:40,675 - util.py[DEBUG]: Read 1714 bytes from /etc/sudoers
2025-12-07 15:40:40,676 - util.py[DEBUG]: Writing to /etc/sudoers.d/90-cloud-init-users - wb: [440] 120 bytes
2025-12-07 15:40:40,677 - handlers.py[DEBUG]: finish: init-network/config-users-groups: SUCCESS: config-users-groups ran successfully
2025-12-07 15:40:40,677 - modules.py[DEBUG]: Running module ssh (<module 'cloudinit.config.cc_ssh' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_ssh.py'>) with frequency once-per-instance
2025-12-07 15:40:40,677 - handlers.py[DEBUG]: start: init-network/config-ssh: running config-ssh with frequency once-per-instance
2025-12-07 15:40:40,678 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_ssh - wb: [644] 24 bytes
2025-12-07 15:40:40,678 - helpers.py[DEBUG]: Running config-ssh using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_ssh'>)
2025-12-07 15:40:40,679 - subp.py[DEBUG]: Running command ['ssh-keygen', '-t', 'rsa', '-N', '', '-f', '/etc/ssh/ssh_host_rsa_key'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:41,451 - util.py[DEBUG]: Group ssh_keys is not a valid group name
2025-12-07 15:40:41,452 - subp.py[DEBUG]: Running command ['ssh-keygen', '-t', 'dsa', '-N', '', '-f', '/etc/ssh/ssh_host_dsa_key'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:41,526 - util.py[DEBUG]: Group ssh_keys is not a valid group name
2025-12-07 15:40:41,526 - subp.py[DEBUG]: Running command ['ssh-keygen', '-t', 'ecdsa', '-N', '', '-f', '/etc/ssh/ssh_host_ecdsa_key'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:41,535 - util.py[DEBUG]: Group ssh_keys is not a valid group name
2025-12-07 15:40:41,535 - subp.py[DEBUG]: Running command ['ssh-keygen', '-t', 'ed25519', '-N', '', '-f', '/etc/ssh/ssh_host_ed25519_key'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:41,543 - util.py[DEBUG]: Group ssh_keys is not a valid group name
2025-12-07 15:40:41,543 - util.py[DEBUG]: Reading from /etc/ssh/ssh_host_ed25519_key.pub (quiet=False)
2025-12-07 15:40:41,544 - util.py[DEBUG]: Read 97 bytes from /etc/ssh/ssh_host_ed25519_key.pub
2025-12-07 15:40:41,544 - util.py[DEBUG]: Reading from /etc/ssh/ssh_host_rsa_key.pub (quiet=False)
2025-12-07 15:40:41,544 - util.py[DEBUG]: Read 569 bytes from /etc/ssh/ssh_host_rsa_key.pub
2025-12-07 15:40:41,544 - util.py[DEBUG]: Reading from /etc/ssh/ssh_host_ecdsa_key.pub (quiet=False)
2025-12-07 15:40:41,544 - util.py[DEBUG]: Read 177 bytes from /etc/ssh/ssh_host_ecdsa_key.pub
2025-12-07 15:40:41,544 - ug_util.py[WARNING]: DEPRECATED: 'user' of type string is deprecated and will be removed in a future release. Use 'users' list instead.
2025-12-07 15:40:41,545 - util.py[DEBUG]: Reading from /etc/ssh/sshd_config (quiet=False)
2025-12-07 15:40:41,545 - util.py[DEBUG]: Read 3230 bytes from /etc/ssh/sshd_config
2025-12-07 15:40:41,546 - util.py[DEBUG]: Writing to /root/.ssh/authorized_keys - wb: [600] 0 bytes
2025-12-07 15:40:41,547 - util.py[DEBUG]: Changing the ownership of /root/.ssh/authorized_keys to 0:0
2025-12-07 15:40:41,547 - util.py[DEBUG]: Reading from /root/.ssh/authorized_keys (quiet=False)
2025-12-07 15:40:41,547 - util.py[DEBUG]: Read 0 bytes from /root/.ssh/authorized_keys
2025-12-07 15:40:41,547 - util.py[DEBUG]: Writing to /root/.ssh/authorized_keys - wb: [600] 0 bytes
2025-12-07 15:40:41,548 - util.py[DEBUG]: Reading from /etc/ssh/sshd_config (quiet=False)
2025-12-07 15:40:41,548 - util.py[DEBUG]: Read 3230 bytes from /etc/ssh/sshd_config
2025-12-07 15:40:41,548 - util.py[DEBUG]: Reading from /root/.ssh/authorized_keys (quiet=False)
2025-12-07 15:40:41,548 - util.py[DEBUG]: Read 0 bytes from /root/.ssh/authorized_keys
2025-12-07 15:40:41,549 - util.py[DEBUG]: Writing to /root/.ssh/authorized_keys - wb: [600] 0 bytes
2025-12-07 15:40:41,549 - handlers.py[DEBUG]: finish: init-network/config-ssh: SUCCESS: config-ssh ran successfully
2025-12-07 15:40:41,549 - main.py[DEBUG]: Ran 12 modules with 1 failures
2025-12-07 15:40:41,550 - atomic_helper.py[DEBUG]: Atomically writing to file /var/lib/cloud/data/status.json (via temporary file /var/lib/cloud/data/tmp6q3q52xi) - w: [644] 748 bytes/chars
2025-12-07 15:40:41,550 - util.py[DEBUG]: Reading from /proc/uptime (quiet=False)
2025-12-07 15:40:41,550 - util.py[DEBUG]: Read 13 bytes from /proc/uptime
2025-12-07 15:40:41,550 - util.py[DEBUG]: cloud-init mode 'init' took 1.173 seconds (1.17)
2025-12-07 15:40:41,551 - handlers.py[DEBUG]: finish: init-network: FAIL: searching for network datasources
2025-12-07 15:40:42,041 - util.py[DEBUG]: Cloud-init v. 22.4.2 running 'modules:config' at Sun, 07 Dec 2025 15:40:42 +0000. Up 20.84 seconds.
2025-12-07 15:40:42,043 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,043 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,045 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,045 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,047 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,047 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,049 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,049 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,052 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,052 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,056 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,056 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,058 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,058 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,061 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,061 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,064 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,064 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,066 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,066 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,067 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,068 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,069 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,069 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,071 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,071 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,072 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2025-12-07 15:40:42,073 - modules.py[INFO]: Skipping modules 'snap,keyboard,apt-pipelining,ntp,disable-ec2-metadata,runcmd' because no applicable config is provided.
2025-12-07 15:40:42,074 - modules.py[DEBUG]: Running module ssh-import-id (<module 'cloudinit.config.cc_ssh_import_id' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_ssh_import_id.py'>) with frequency once-per-instance
2025-12-07 15:40:42,074 - handlers.py[DEBUG]: start: modules-config/config-ssh-import-id: running config-ssh-import-id with frequency once-per-instance
2025-12-07 15:40:42,074 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_ssh_import_id - wb: [644] 24 bytes
2025-12-07 15:40:42,074 - helpers.py[DEBUG]: Running config-ssh-import-id using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_ssh_import_id'>)
2025-12-07 15:40:42,074 - cc_ssh_import_id.py[DEBUG]: Skipping module named ssh-import-id, no 'ssh_import_id' directives found.
2025-12-07 15:40:42,075 - handlers.py[DEBUG]: finish: modules-config/config-ssh-import-id: SUCCESS: config-ssh-import-id ran successfully
2025-12-07 15:40:42,075 - modules.py[DEBUG]: Running module locale (<module 'cloudinit.config.cc_locale' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_locale.py'>) with frequency once-per-instance
2025-12-07 15:40:42,075 - handlers.py[DEBUG]: start: modules-config/config-locale: running config-locale with frequency once-per-instance
2025-12-07 15:40:42,075 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_locale - wb: [644] 24 bytes
2025-12-07 15:40:42,075 - helpers.py[DEBUG]: Running config-locale using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_locale'>)
2025-12-07 15:40:42,075 - util.py[DEBUG]: Reading from /etc/default/locale (quiet=False)
2025-12-07 15:40:42,075 - util.py[DEBUG]: Read 13 bytes from /etc/default/locale
2025-12-07 15:40:42,075 - cc_locale.py[DEBUG]: Setting locale to C.UTF-8
2025-12-07 15:40:42,075 - debian.py[DEBUG]: System has 'LANG=C.UTF-8' requested 'C.UTF-8', skipping regeneration.
2025-12-07 15:40:42,075 - handlers.py[DEBUG]: finish: modules-config/config-locale: SUCCESS: config-locale ran successfully
2025-12-07 15:40:42,075 - modules.py[DEBUG]: Running module set-passwords (<module 'cloudinit.config.cc_set_passwords' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_set_passwords.py'>) with frequency once-per-instance
2025-12-07 15:40:42,075 - handlers.py[DEBUG]: start: modules-config/config-set-passwords: running config-set-passwords with frequency once-per-instance
2025-12-07 15:40:42,076 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_set_passwords - wb: [644] 24 bytes
2025-12-07 15:40:42,076 - helpers.py[DEBUG]: Running config-set-passwords using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_set_passwords'>)
2025-12-07 15:40:42,076 - ug_util.py[WARNING]: DEPRECATED: 'user' of type string is deprecated and will be removed in a future release. Use 'users' list instead.
2025-12-07 15:40:42,076 - cc_set_passwords.py[DEBUG]: Changing password for ['root']:
2025-12-07 15:40:42,076 - subp.py[DEBUG]: Running command ['chpasswd'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:42,111 - subp.py[DEBUG]: Running command ['systemctl', 'status', 'ssh'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:42,127 - util.py[DEBUG]: Writing to /etc/ssh/sshd_config.d/50-cloud-init.conf - ab: [600] 0 bytes
2025-12-07 15:40:42,127 - util.py[DEBUG]: Reading from /etc/ssh/sshd_config.d/50-cloud-init.conf (quiet=False)
2025-12-07 15:40:42,127 - util.py[DEBUG]: Read 0 bytes from /etc/ssh/sshd_config.d/50-cloud-init.conf
2025-12-07 15:40:42,127 - ssh_util.py[DEBUG]: line 1: option PasswordAuthentication added with yes
2025-12-07 15:40:42,127 - util.py[DEBUG]: Writing to /etc/ssh/sshd_config.d/50-cloud-init.conf - wb: [600] 27 bytes
2025-12-07 15:40:42,128 - subp.py[DEBUG]: Running command ['systemctl', 'restart', 'ssh'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:42,221 - cc_set_passwords.py[DEBUG]: Restarted the SSH daemon.
2025-12-07 15:40:42,222 - handlers.py[DEBUG]: finish: modules-config/config-set-passwords: SUCCESS: config-set-passwords ran successfully
2025-12-07 15:40:42,222 - modules.py[DEBUG]: Running module grub-dpkg (<module 'cloudinit.config.cc_grub_dpkg' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_grub_dpkg.py'>) with frequency once-per-instance
2025-12-07 15:40:42,222 - handlers.py[DEBUG]: start: modules-config/config-grub-dpkg: running config-grub-dpkg with frequency once-per-instance
2025-12-07 15:40:42,223 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_grub_dpkg - wb: [644] 24 bytes
2025-12-07 15:40:42,223 - helpers.py[DEBUG]: Running config-grub-dpkg using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_grub_dpkg'>)
2025-12-07 15:40:42,223 - subp.py[DEBUG]: Running command ['grub-probe', '-t', 'disk', '/boot'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:42,234 - subp.py[DEBUG]: Running command ['udevadm', 'info', '--root', '--query=symlink', '/dev/sda'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:42,241 - cc_grub_dpkg.py[DEBUG]: considering these device symlinks: /dev/disk/by-diskseq/1,/dev/disk/by-id/scsi-0QEMU_QEMU_HARDDISK_drive-scsi0,/dev/disk/by-path/pci-0000:00:05.0-scsi-0:0:0:0
2025-12-07 15:40:42,241 - cc_grub_dpkg.py[DEBUG]: filtered to these disk/by-id symlinks: /dev/disk/by-id/scsi-0QEMU_QEMU_HARDDISK_drive-scsi0
2025-12-07 15:40:42,241 - cc_grub_dpkg.py[DEBUG]: selected /dev/disk/by-id/scsi-0QEMU_QEMU_HARDDISK_drive-scsi0
2025-12-07 15:40:42,242 - cc_grub_dpkg.py[DEBUG]: Setting grub debconf-set-selections with '/dev/disk/by-id/scsi-0QEMU_QEMU_HARDDISK_drive-scsi0','false'
2025-12-07 15:40:42,242 - subp.py[DEBUG]: Running command ['debconf-set-selections'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:42,414 - handlers.py[DEBUG]: finish: modules-config/config-grub-dpkg: SUCCESS: config-grub-dpkg ran successfully
2025-12-07 15:40:42,414 - modules.py[DEBUG]: Running module apt-configure (<module 'cloudinit.config.cc_apt_configure' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_apt_configure.py'>) with frequency once-per-instance
2025-12-07 15:40:42,414 - handlers.py[DEBUG]: start: modules-config/config-apt-configure: running config-apt-configure with frequency once-per-instance
2025-12-07 15:40:42,415 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_apt_configure - wb: [644] 24 bytes
2025-12-07 15:40:42,415 - helpers.py[DEBUG]: Running config-apt-configure using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_apt_configure'>)
2025-12-07 15:40:42,415 - cc_apt_configure.py[DEBUG]: debconf_selections was not set in config
2025-12-07 15:40:42,415 - cc_apt_configure.py[DEBUG]: handling apt config: {'generate_mirrorlists': True, 'preserve_sources_list': True}
2025-12-07 15:40:42,415 - subp.py[DEBUG]: Running command ['lsb_release', '--all'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:42,431 - subp.py[DEBUG]: Running command ['dpkg', '--print-architecture'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:42,437 - cc_apt_configure.py[DEBUG]: got primary mirror: None
2025-12-07 15:40:42,437 - cc_apt_configure.py[DEBUG]: got security mirror: None
2025-12-07 15:40:42,438 - subp.py[DEBUG]: Running command ['dpkg', '--print-architecture'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:42,440 - __init__.py[DEBUG]: filtered distro mirror info: {'primary': 'https://deb.debian.org/debian', 'security': 'https://deb.debian.org/debian-security'}
2025-12-07 15:40:42,440 - cc_apt_configure.py[DEBUG]: Apt Mirror info: {'primary': 'https://deb.debian.org/debian', 'security': 'https://deb.debian.org/debian-security', 'PRIMARY': 'https://deb.debian.org/debian', 'SECURITY': 'https://deb.debian.org/debian-security', 'MIRROR': 'https://deb.debian.org/debian'}
2025-12-07 15:40:42,440 - util.py[DEBUG]: Writing to /etc/apt/mirrors/debian.list - wb: [644] 30 bytes
2025-12-07 15:40:42,442 - util.py[DEBUG]: Writing to /etc/apt/mirrors/debian-security.list - wb: [644] 39 bytes
2025-12-07 15:40:42,442 - handlers.py[DEBUG]: finish: modules-config/config-apt-configure: SUCCESS: config-apt-configure ran successfully
2025-12-07 15:40:42,442 - modules.py[DEBUG]: Running module timezone (<module 'cloudinit.config.cc_timezone' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_timezone.py'>) with frequency once-per-instance
2025-12-07 15:40:42,443 - handlers.py[DEBUG]: start: modules-config/config-timezone: running config-timezone with frequency once-per-instance
2025-12-07 15:40:42,443 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_timezone - wb: [644] 24 bytes
2025-12-07 15:40:42,443 - helpers.py[DEBUG]: Running config-timezone using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_timezone'>)
2025-12-07 15:40:42,444 - util.py[DEBUG]: Writing to /etc/timezone - wb: [644] 14 bytes
2025-12-07 15:40:42,445 - util.py[DEBUG]: Attempting to remove /etc/localtime
2025-12-07 15:40:42,445 - handlers.py[DEBUG]: finish: modules-config/config-timezone: SUCCESS: config-timezone ran successfully
2025-12-07 15:40:42,445 - modules.py[DEBUG]: Running module byobu (<module 'cloudinit.config.cc_byobu' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_byobu.py'>) with frequency once-per-instance
2025-12-07 15:40:42,445 - handlers.py[DEBUG]: start: modules-config/config-byobu: running config-byobu with frequency once-per-instance
2025-12-07 15:40:42,445 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_byobu - wb: [644] 23 bytes
2025-12-07 15:40:42,446 - helpers.py[DEBUG]: Running config-byobu using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_byobu'>)
2025-12-07 15:40:42,446 - cc_byobu.py[DEBUG]: Skipping module named byobu, no 'byobu' values found
2025-12-07 15:40:42,446 - handlers.py[DEBUG]: finish: modules-config/config-byobu: SUCCESS: config-byobu ran successfully
2025-12-07 15:40:42,446 - main.py[DEBUG]: Ran 7 modules with 0 failures
2025-12-07 15:40:42,446 - atomic_helper.py[DEBUG]: Atomically writing to file /var/lib/cloud/data/status.json (via temporary file /var/lib/cloud/data/tmp4_irru2o) - w: [644] 775 bytes/chars
2025-12-07 15:40:42,447 - util.py[DEBUG]: Reading from /proc/uptime (quiet=False)
2025-12-07 15:40:42,447 - util.py[DEBUG]: Read 13 bytes from /proc/uptime
2025-12-07 15:40:42,447 - util.py[DEBUG]: cloud-init mode 'modules' took 0.472 seconds (0.47)
2025-12-07 15:40:42,447 - handlers.py[DEBUG]: finish: modules-config: SUCCESS: running modules for config
2025-12-07 15:40:42,856 - util.py[DEBUG]: Cloud-init v. 22.4.2 running 'modules:final' at Sun, 07 Dec 2025 15:40:42 +0000. Up 21.65 seconds.
2025-12-07 15:40:42,857 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,858 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,860 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,860 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,861 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,862 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,864 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,864 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,866 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,866 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,869 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,869 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,871 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,871 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,873 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,873 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,875 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,875 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,878 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,878 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,879 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,879 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,881 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,881 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,882 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,883 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,884 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,884 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,886 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,886 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,888 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,888 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,889 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,890 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,891 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,892 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,893 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,893 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,895 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,895 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,897 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,897 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,899 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2025-12-07 15:40:42,901 - modules.py[INFO]: Skipping modules 'fan,landscape,lxd,puppet,chef,mcollective,salt-minion,phone-home,power-state-change' because no applicable config is provided.
2025-12-07 15:40:42,902 - modules.py[DEBUG]: Running module package-update-upgrade-install (<module 'cloudinit.config.cc_package_update_upgrade_install' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_package_update_upgrade_install.py'>) with frequency once-per-instance
2025-12-07 15:40:42,902 - handlers.py[DEBUG]: start: modules-final/config-package-update-upgrade-install: running config-package-update-upgrade-install with frequency once-per-instance
2025-12-07 15:40:42,902 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_package_update_upgrade_install - wb: [644] 24 bytes
2025-12-07 15:40:42,902 - helpers.py[DEBUG]: Running config-package-update-upgrade-install using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_package_update_upgrade_install'>)
2025-12-07 15:40:42,903 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/update_sources - wb: [644] 24 bytes
2025-12-07 15:40:42,903 - helpers.py[DEBUG]: Running update-sources using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/update_sources'>)
2025-12-07 15:40:42,903 - debian.py[DEBUG]: Waiting for apt lock
2025-12-07 15:40:42,904 - debian.py[DEBUG]: apt lock available
2025-12-07 15:40:42,904 - subp.py[DEBUG]: Running command ['apt-get', '--option=Dpkg::Options::=--force-confold', '--option=Dpkg::options::=--force-unsafe-io', '--assume-yes', '--quiet', 'update'] with allowed return codes [0] (shell=False, capture=False)
2025-12-07 15:40:46,822 - util.py[DEBUG]: apt-update [apt-get --option=Dpkg::Options::=--force-confold --option=Dpkg::options::=--force-unsafe-io --assume-yes --quiet update] took 3.918 seconds
2025-12-07 15:40:46,822 - debian.py[DEBUG]: Waiting for apt lock
2025-12-07 15:40:46,823 - debian.py[DEBUG]: apt lock available
2025-12-07 15:40:46,823 - subp.py[DEBUG]: Running command ['apt-get', '--option=Dpkg::Options::=--force-confold', '--option=Dpkg::options::=--force-unsafe-io', '--assume-yes', '--quiet', 'dist-upgrade'] with allowed return codes [0] (shell=False, capture=False)
2025-12-07 15:41:45,497 - util.py[DEBUG]: apt-upgrade [apt-get --option=Dpkg::Options::=--force-confold --option=Dpkg::options::=--force-unsafe-io --assume-yes --quiet dist-upgrade] took 58.675 seconds
2025-12-07 15:41:45,498 - helpers.py[DEBUG]: update-sources already ran (freq=once-per-instance)
2025-12-07 15:41:45,498 - debian.py[DEBUG]: Waiting for apt lock
2025-12-07 15:41:45,498 - debian.py[DEBUG]: apt lock available
2025-12-07 15:41:45,498 - subp.py[DEBUG]: Running command ['apt-get', '--option=Dpkg::Options::=--force-confold', '--option=Dpkg::options::=--force-unsafe-io', '--assume-yes', '--quiet', 'install', 'cron'] with allowed return codes [0] (shell=False, capture=False)
2025-12-07 15:41:51,640 - util.py[DEBUG]: apt-install [apt-get --option=Dpkg::Options::=--force-confold --option=Dpkg::options::=--force-unsafe-io --assume-yes --quiet install cron] took 6.142 seconds
2025-12-07 15:41:51,641 - handlers.py[DEBUG]: finish: modules-final/config-package-update-upgrade-install: SUCCESS: config-package-update-upgrade-install ran successfully
2025-12-07 15:41:51,641 - modules.py[DEBUG]: Running module write-files-deferred (<module 'cloudinit.config.cc_write_files_deferred' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_write_files_deferred.py'>) with frequency once-per-instance
2025-12-07 15:41:51,641 - handlers.py[DEBUG]: start: modules-final/config-write-files-deferred: running config-write-files-deferred with frequency once-per-instance
2025-12-07 15:41:51,642 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_write_files_deferred - wb: [644] 24 bytes
2025-12-07 15:41:51,643 - helpers.py[DEBUG]: Running config-write-files-deferred using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_write_files_deferred'>)
2025-12-07 15:41:51,643 - cc_write_files_deferred.py[DEBUG]: Skipping module named write-files-deferred, no deferred file defined in configuration
2025-12-07 15:41:51,643 - handlers.py[DEBUG]: finish: modules-final/config-write-files-deferred: SUCCESS: config-write-files-deferred ran successfully
2025-12-07 15:41:51,643 - modules.py[DEBUG]: Running module reset_rmc (<module 'cloudinit.config.cc_reset_rmc' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_reset_rmc.py'>) with frequency once-per-instance
2025-12-07 15:41:51,643 - handlers.py[DEBUG]: start: modules-final/config-reset_rmc: running config-reset_rmc with frequency once-per-instance
2025-12-07 15:41:51,643 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_reset_rmc - wb: [644] 24 bytes
2025-12-07 15:41:51,644 - helpers.py[DEBUG]: Running config-reset_rmc using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_reset_rmc'>)
2025-12-07 15:41:51,644 - cc_reset_rmc.py[DEBUG]: module disabled, RSCT_PATH not present
2025-12-07 15:41:51,644 - handlers.py[DEBUG]: finish: modules-final/config-reset_rmc: SUCCESS: config-reset_rmc ran successfully
2025-12-07 15:41:51,644 - modules.py[DEBUG]: Running module refresh_rmc_and_interface (<module 'cloudinit.config.cc_refresh_rmc_and_interface' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_refresh_rmc_and_interface.py'>) with frequency always
2025-12-07 15:41:51,644 - handlers.py[DEBUG]: start: modules-final/config-refresh_rmc_and_interface: running config-refresh_rmc_and_interface with frequency always
2025-12-07 15:41:51,644 - helpers.py[DEBUG]: Running config-refresh_rmc_and_interface using lock (<cloudinit.helpers.DummyLock object at 0x7f8bc6095c50>)
2025-12-07 15:41:51,644 - cc_refresh_rmc_and_interface.py[DEBUG]: No 'rmcctrl' in path, disabled
2025-12-07 15:41:51,644 - handlers.py[DEBUG]: finish: modules-final/config-refresh_rmc_and_interface: SUCCESS: config-refresh_rmc_and_interface ran successfully
2025-12-07 15:41:51,644 - modules.py[DEBUG]: Running module rightscale_userdata (<module 'cloudinit.config.cc_rightscale_userdata' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_rightscale_userdata.py'>) with frequency once-per-instance
2025-12-07 15:41:51,645 - handlers.py[DEBUG]: start: modules-final/config-rightscale_userdata: running config-rightscale_userdata with frequency once-per-instance
2025-12-07 15:41:51,645 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_rightscale_userdata - wb: [644] 23 bytes
2025-12-07 15:41:51,645 - helpers.py[DEBUG]: Running config-rightscale_userdata using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_rightscale_userdata'>)
2025-12-07 15:41:51,645 - cc_rightscale_userdata.py[DEBUG]: Failed to get raw userdata in module rightscale_userdata
2025-12-07 15:41:51,645 - handlers.py[DEBUG]: finish: modules-final/config-rightscale_userdata: SUCCESS: config-rightscale_userdata ran successfully
2025-12-07 15:41:51,645 - modules.py[DEBUG]: Running module scripts-vendor (<module 'cloudinit.config.cc_scripts_vendor' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_vendor.py'>) with frequency once-per-instance
2025-12-07 15:41:51,645 - handlers.py[DEBUG]: start: modules-final/config-scripts-vendor: running config-scripts-vendor with frequency once-per-instance
2025-12-07 15:41:51,645 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_scripts_vendor - wb: [644] 23 bytes
2025-12-07 15:41:51,646 - helpers.py[DEBUG]: Running config-scripts-vendor using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_scripts_vendor'>)
2025-12-07 15:41:51,646 - handlers.py[DEBUG]: finish: modules-final/config-scripts-vendor: SUCCESS: config-scripts-vendor ran successfully
2025-12-07 15:41:51,646 - modules.py[DEBUG]: Running module scripts-per-once (<module 'cloudinit.config.cc_scripts_per_once' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_per_once.py'>) with frequency once
2025-12-07 15:41:51,647 - handlers.py[DEBUG]: start: modules-final/config-scripts-per-once: running config-scripts-per-once with frequency once
2025-12-07 15:41:51,647 - util.py[DEBUG]: Writing to /var/lib/cloud/sem/config_scripts_per_once.once - wb: [644] 24 bytes
2025-12-07 15:41:51,648 - helpers.py[DEBUG]: Running config-scripts-per-once using lock (<FileLock using file '/var/lib/cloud/sem/config_scripts_per_once.once'>)
2025-12-07 15:41:51,649 - handlers.py[DEBUG]: finish: modules-final/config-scripts-per-once: SUCCESS: config-scripts-per-once ran successfully
2025-12-07 15:41:51,649 - modules.py[DEBUG]: Running module scripts-per-boot (<module 'cloudinit.config.cc_scripts_per_boot' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_per_boot.py'>) with frequency always
2025-12-07 15:41:51,649 - handlers.py[DEBUG]: start: modules-final/config-scripts-per-boot: running config-scripts-per-boot with frequency always
2025-12-07 15:41:51,649 - helpers.py[DEBUG]: Running config-scripts-per-boot using lock (<cloudinit.helpers.DummyLock object at 0x7f8bc6094b10>)
2025-12-07 15:41:51,650 - handlers.py[DEBUG]: finish: modules-final/config-scripts-per-boot: SUCCESS: config-scripts-per-boot ran successfully
2025-12-07 15:41:51,650 - modules.py[DEBUG]: Running module scripts-per-instance (<module 'cloudinit.config.cc_scripts_per_instance' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_per_instance.py'>) with frequency once-per-instance
2025-12-07 15:41:51,650 - handlers.py[DEBUG]: start: modules-final/config-scripts-per-instance: running config-scripts-per-instance with frequency once-per-instance
2025-12-07 15:41:51,650 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_scripts_per_instance - wb: [644] 24 bytes
2025-12-07 15:41:51,651 - helpers.py[DEBUG]: Running config-scripts-per-instance using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_scripts_per_instance'>)
2025-12-07 15:41:51,651 - handlers.py[DEBUG]: finish: modules-final/config-scripts-per-instance: SUCCESS: config-scripts-per-instance ran successfully
2025-12-07 15:41:51,651 - modules.py[DEBUG]: Running module scripts-user (<module 'cloudinit.config.cc_scripts_user' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_user.py'>) with frequency once-per-instance
2025-12-07 15:41:51,651 - handlers.py[DEBUG]: start: modules-final/config-scripts-user: running config-scripts-user with frequency once-per-instance
2025-12-07 15:41:51,652 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_scripts_user - wb: [644] 24 bytes
2025-12-07 15:41:51,652 - helpers.py[DEBUG]: Running config-scripts-user using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_scripts_user'>)
2025-12-07 15:41:51,652 - handlers.py[DEBUG]: finish: modules-final/config-scripts-user: SUCCESS: config-scripts-user ran successfully
2025-12-07 15:41:51,652 - modules.py[DEBUG]: Running module ssh-authkey-fingerprints (<module 'cloudinit.config.cc_ssh_authkey_fingerprints' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_ssh_authkey_fingerprints.py'>) with frequency once-per-instance
2025-12-07 15:41:51,652 - handlers.py[DEBUG]: start: modules-final/config-ssh-authkey-fingerprints: running config-ssh-authkey-fingerprints with frequency once-per-instance
2025-12-07 15:41:51,653 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_ssh_authkey_fingerprints - wb: [644] 24 bytes
2025-12-07 15:41:51,653 - helpers.py[DEBUG]: Running config-ssh-authkey-fingerprints using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_ssh_authkey_fingerprints'>)
2025-12-07 15:41:51,653 - ug_util.py[WARNING]: DEPRECATED: 'user' of type string is deprecated and will be removed in a future release. Use 'users' list instead.
2025-12-07 15:41:51,654 - util.py[DEBUG]: Reading from /etc/ssh/sshd_config (quiet=False)
2025-12-07 15:41:51,654 - util.py[DEBUG]: Read 3230 bytes from /etc/ssh/sshd_config
2025-12-07 15:41:51,655 - util.py[DEBUG]: Reading from /root/.ssh/authorized_keys (quiet=False)
2025-12-07 15:41:51,655 - util.py[DEBUG]: Read 0 bytes from /root/.ssh/authorized_keys
2025-12-07 15:41:51,655 - handlers.py[DEBUG]: finish: modules-final/config-ssh-authkey-fingerprints: SUCCESS: config-ssh-authkey-fingerprints ran successfully
2025-12-07 15:41:51,655 - modules.py[DEBUG]: Running module keys-to-console (<module 'cloudinit.config.cc_keys_to_console' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_keys_to_console.py'>) with frequency once-per-instance
2025-12-07 15:41:51,656 - handlers.py[DEBUG]: start: modules-final/config-keys-to-console: running config-keys-to-console with frequency once-per-instance
2025-12-07 15:41:51,656 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_keys_to_console - wb: [644] 24 bytes
2025-12-07 15:41:51,656 - helpers.py[DEBUG]: Running config-keys-to-console using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_keys_to_console'>)
2025-12-07 15:41:51,656 - subp.py[DEBUG]: Running command ['/usr/lib/cloud-init/write-ssh-key-fingerprints', '', 'ssh-dss'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:41:51,720 - handlers.py[DEBUG]: finish: modules-final/config-keys-to-console: SUCCESS: config-keys-to-console ran successfully
2025-12-07 15:41:51,720 - modules.py[DEBUG]: Running module install-hotplug (<module 'cloudinit.config.cc_install_hotplug' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_install_hotplug.py'>) with frequency once-per-instance
2025-12-07 15:41:51,721 - handlers.py[DEBUG]: start: modules-final/config-install-hotplug: running config-install-hotplug with frequency once-per-instance
2025-12-07 15:41:51,721 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_install_hotplug - wb: [644] 23 bytes
2025-12-07 15:41:51,721 - helpers.py[DEBUG]: Running config-install-hotplug using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_install_hotplug'>)
2025-12-07 15:41:51,722 - stages.py[DEBUG]: Allowed events: {<EventScope.NETWORK: 'network'>: {<EventType.BOOT_NEW_INSTANCE: 'boot-new-instance'>}}
2025-12-07 15:41:51,722 - stages.py[DEBUG]: Event Denied: scopes=['network'] EventType=hotplug
2025-12-07 15:41:51,722 - cc_install_hotplug.py[DEBUG]: Skipping hotplug install, not enabled
2025-12-07 15:41:51,722 - handlers.py[DEBUG]: finish: modules-final/config-install-hotplug: SUCCESS: config-install-hotplug ran successfully
2025-12-07 15:41:51,722 - modules.py[DEBUG]: Running module final-message (<module 'cloudinit.config.cc_final_message' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_final_message.py'>) with frequency always
2025-12-07 15:41:51,722 - handlers.py[DEBUG]: start: modules-final/config-final-message: running config-final-message with frequency always
2025-12-07 15:41:51,722 - helpers.py[DEBUG]: Running config-final-message using lock (<cloudinit.helpers.DummyLock object at 0x7f8bc608b0d0>)
2025-12-07 15:41:51,722 - util.py[DEBUG]: Reading from /proc/uptime (quiet=False)
2025-12-07 15:41:51,722 - util.py[DEBUG]: Read 13 bytes from /proc/uptime
2025-12-07 15:41:51,731 - util.py[DEBUG]: Cloud-init v. 22.4.2 finished at Sun, 07 Dec 2025 15:41:51 +0000. Datasource DataSourceNoCloud [seed=/dev/sr0][dsmode=net].  Up 90.56 seconds
2025-12-07 15:41:51,731 - util.py[DEBUG]: Writing to /var/lib/cloud/instance/boot-finished - wb: [644] 52 bytes
2025-12-07 15:41:51,733 - handlers.py[DEBUG]: finish: modules-final/config-final-message: SUCCESS: config-final-message ran successfully
2025-12-07 15:41:51,733 - main.py[DEBUG]: Ran 14 modules with 0 failures
2025-12-07 15:41:51,734 - atomic_helper.py[DEBUG]: Atomically writing to file /var/lib/cloud/data/status.json (via temporary file /var/lib/cloud/data/tmptuqpzmf8) - w: [644] 803 bytes/chars
2025-12-07 15:41:51,735 - atomic_helper.py[DEBUG]: Atomically writing to file /var/lib/cloud/data/result.json (via temporary file /var/lib/cloud/data/tmpstatud_k) - w: [644] 296 bytes/chars
2025-12-07 15:41:51,735 - util.py[DEBUG]: Creating symbolic link from '/run/cloud-init/result.json' => '../../var/lib/cloud/data/result.json'
2025-12-07 15:41:51,735 - util.py[DEBUG]: Reading from /proc/uptime (quiet=False)
2025-12-07 15:41:51,735 - util.py[DEBUG]: Read 13 bytes from /proc/uptime
2025-12-07 15:41:51,736 - util.py[DEBUG]: cloud-init mode 'modules' took 68.944 seconds (68.95)
2025-12-07 15:41:51,736 - handlers.py[DEBUG]: finish: modules-final: SUCCESS: running modules for final
2025-12-07 16:06:03,093 - util.py[DEBUG]: Cloud-init v. 22.4.2 running 'init-local' at Sun, 07 Dec 2025 16:06:03 +0000. Up 3.72 seconds.
2025-12-07 16:06:03,094 - main.py[DEBUG]: No kernel command line url found.
2025-12-07 16:06:03,094 - main.py[DEBUG]: Closing stdin.
2025-12-07 16:06:03,096 - util.py[DEBUG]: Writing to /var/log/cloud-init.log - ab: [644] 0 bytes
2025-12-07 16:06:03,096 - util.py[DEBUG]: Changing the ownership of /var/log/cloud-init.log to 0:4
2025-12-07 16:06:03,097 - util.py[DEBUG]: Attempting to remove /var/lib/cloud/instance/boot-finished
2025-12-07 16:06:03,097 - handlers.py[DEBUG]: start: init-local/check-cache: attempting to read from cache [check]
2025-12-07 16:06:03,097 - util.py[DEBUG]: Reading from /var/lib/cloud/instance/obj.pkl (quiet=False)
2025-12-07 16:06:03,098 - util.py[DEBUG]: Read 10395 bytes from /var/lib/cloud/instance/obj.pkl
2025-12-07 16:06:03,102 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud/meta-data (quiet=False)
2025-12-07 16:06:03,102 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud-net/meta-data (quiet=False)
2025-12-07 16:06:03,102 - stages.py[DEBUG]: cache invalid in datasource: DataSourceNoCloud [seed=/dev/sr0][dsmode=net]
2025-12-07 16:06:03,102 - handlers.py[DEBUG]: finish: init-local/check-cache: SUCCESS: cache invalid in datasource: DataSourceNoCloud [seed=/dev/sr0][dsmode=net]
2025-12-07 16:06:03,102 - util.py[DEBUG]: Attempting to remove /var/lib/cloud/instance
2025-12-07 16:06:03,105 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2025-12-07 16:06:03,105 - __init__.py[DEBUG]: Looking for data source in: ['NoCloud', 'None'], via packages ['', 'cloudinit.sources'] that matches dependencies ['FILESYSTEM']
2025-12-07 16:06:03,106 - __init__.py[DEBUG]: Searching for local data source in: ['DataSourceNoCloud']
2025-12-07 16:06:03,106 - handlers.py[DEBUG]: start: init-local/search-NoCloud: searching for local data from DataSourceNoCloud
2025-12-07 16:06:03,106 - __init__.py[DEBUG]: Seeing if we can get any data from <class 'cloudinit.sources.DataSourceNoCloud.DataSourceNoCloud'>
2025-12-07 16:06:03,106 - __init__.py[DEBUG]: Update datasource metadata and network config due to events: boot-new-instance
2025-12-07 16:06:03,106 - dmi.py[DEBUG]: querying dmi data /sys/class/dmi/id/product_serial
2025-12-07 16:06:03,106 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud/user-data (quiet=False)
2025-12-07 16:06:03,106 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud/meta-data (quiet=False)
2025-12-07 16:06:03,106 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud/vendor-data (quiet=False)
2025-12-07 16:06:03,106 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud/network-config (quiet=False)
2025-12-07 16:06:03,106 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud-net/user-data (quiet=False)
2025-12-07 16:06:03,106 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud-net/meta-data (quiet=False)
2025-12-07 16:06:03,106 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud-net/vendor-data (quiet=False)
2025-12-07 16:06:03,106 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud-net/network-config (quiet=False)
2025-12-07 16:06:03,106 - subp.py[DEBUG]: Running command ['blkid', '-tTYPE=vfat', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2025-12-07 16:06:03,192 - subp.py[DEBUG]: Running command ['blkid', '-tTYPE=iso9660', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2025-12-07 16:06:03,199 - subp.py[DEBUG]: Running command ['blkid', '-tLABEL=CIDATA', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2025-12-07 16:06:03,206 - subp.py[DEBUG]: Running command ['blkid', '-tLABEL=cidata', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2025-12-07 16:06:03,212 - subp.py[DEBUG]: Running command ['blkid', '-tLABEL_FATBOOT=cidata', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2025-12-07 16:06:03,218 - DataSourceNoCloud.py[DEBUG]: Attempting to use data from /dev/sr0
2025-12-07 16:06:03,219 - util.py[DEBUG]: Reading from /proc/mounts (quiet=False)
2025-12-07 16:06:03,219 - util.py[DEBUG]: Read 1938 bytes from /proc/mounts
2025-12-07 16:06:03,219 - util.py[DEBUG]: Fetched {'sysfs': {'fstype': 'sysfs', 'mountpoint': '/sys', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'proc': {'fstype': 'proc', 'mountpoint': '/proc', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'udev': {'fstype': 'devtmpfs', 'mountpoint': '/dev', 'opts': 'rw,nosuid,relatime,size=6118440k,nr_inodes=1529610,mode=755,inode64'}, 'devpts': {'fstype': 'devpts', 'mountpoint': '/dev/pts', 'opts': 'rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000'}, 'tmpfs': {'fstype': 'tmpfs', 'mountpoint': '/run/lock', 'opts': 'rw,nosuid,nodev,noexec,relatime,size=5120k,inode64'}, '/dev/sda1': {'fstype': 'ext4', 'mountpoint': '/', 'opts': 'rw,relatime,discard,errors=remount-ro'}, 'securityfs': {'fstype': 'securityfs', 'mountpoint': '/sys/kernel/security', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'cgroup2': {'fstype': 'cgroup2', 'mountpoint': '/sys/fs/cgroup', 'opts': 'rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot'}, 'pstore': {'fstype': 'pstore', 'mountpoint': '/sys/fs/pstore', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'bpf': {'fstype': 'bpf', 'mountpoint': '/sys/fs/bpf', 'opts': 'rw,nosuid,nodev,noexec,relatime,mode=700'}, 'systemd-1': {'fstype': 'autofs', 'mountpoint': '/proc/sys/fs/binfmt_misc', 'opts': 'rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=13001'}, 'hugetlbfs': {'fstype': 'hugetlbfs', 'mountpoint': '/dev/hugepages', 'opts': 'rw,relatime,pagesize=2M'}, 'mqueue': {'fstype': 'mqueue', 'mountpoint': '/dev/mqueue', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'debugfs': {'fstype': 'debugfs', 'mountpoint': '/sys/kernel/debug', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'tracefs': {'fstype': 'tracefs', 'mountpoint': '/sys/kernel/tracing', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'fusectl': {'fstype': 'fusectl', 'mountpoint': '/sys/fs/fuse/connections', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'configfs': {'fstype': 'configfs', 'mountpoint': '/sys/kernel/config', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'ramfs': {'fstype': 'ramfs', 'mountpoint': '/run/credentials/systemd-tmpfiles-setup.service', 'opts': 'ro,nosuid,nodev,noexec,relatime,mode=700'}, '/dev/sda15': {'fstype': 'vfat', 'mountpoint': '/boot/efi', 'opts': 'rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro'}} mounts from proc
2025-12-07 16:06:03,219 - subp.py[DEBUG]: Running command ['mount', '-o', 'ro', '-t', 'auto', '/dev/sr0', '/run/cloud-init/tmp/tmpbe2tce_0'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 16:06:03,325 - util.py[DEBUG]: Reading from /run/cloud-init/tmp/tmpbe2tce_0//user-data (quiet=False)
2025-12-07 16:06:03,326 - util.py[DEBUG]: Read 1714 bytes from /run/cloud-init/tmp/tmpbe2tce_0//user-data
2025-12-07 16:06:03,326 - util.py[DEBUG]: Reading from /run/cloud-init/tmp/tmpbe2tce_0//meta-data (quiet=False)
2025-12-07 16:06:03,327 - util.py[DEBUG]: Read 54 bytes from /run/cloud-init/tmp/tmpbe2tce_0//meta-data
2025-12-07 16:06:03,327 - util.py[DEBUG]: Reading from /run/cloud-init/tmp/tmpbe2tce_0//vendor-data (quiet=False)
2025-12-07 16:06:03,327 - util.py[DEBUG]: Read 0 bytes from /run/cloud-init/tmp/tmpbe2tce_0//vendor-data
2025-12-07 16:06:03,327 - util.py[DEBUG]: Reading from /run/cloud-init/tmp/tmpbe2tce_0//network-config (quiet=False)
2025-12-07 16:06:03,328 - util.py[DEBUG]: Read 455 bytes from /run/cloud-init/tmp/tmpbe2tce_0//network-config
2025-12-07 16:06:03,328 - subp.py[DEBUG]: Running command ['umount', '/run/cloud-init/tmp/tmpbe2tce_0'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 16:06:03,332 - util.py[DEBUG]: Attempting to load yaml from string of length 54 with allowed root types (<class 'dict'>,)
2025-12-07 16:06:03,333 - util.py[DEBUG]: Attempting to load yaml from string of length 455 with allowed root types (<class 'dict'>,)
2025-12-07 16:06:03,336 - DataSourceNoCloud.py[DEBUG]: Using data from /dev/sr0
2025-12-07 16:06:03,336 - util.py[DEBUG]: Reading from /etc/hosts (quiet=False)
2025-12-07 16:06:03,337 - util.py[DEBUG]: Read 565 bytes from /etc/hosts
2025-12-07 16:06:03,338 - util.py[DEBUG]: Writing to /run/cloud-init/cloud-id-nocloud - wb: [644] 8 bytes
2025-12-07 16:06:03,339 - util.py[DEBUG]: Creating symbolic link from '/run/cloud-init/cloud-id' => '/run/cloud-init/cloud-id-nocloud'
2025-12-07 16:06:03,339 - atomic_helper.py[DEBUG]: Atomically writing to file /run/cloud-init/instance-data-sensitive.json (via temporary file /run/cloud-init/tmpe0c_eroi) - w: [600] 6783 bytes/chars
2025-12-07 16:06:03,340 - atomic_helper.py[DEBUG]: Atomically writing to file /run/cloud-init/instance-data.json (via temporary file /run/cloud-init/tmp__450x4_) - w: [644] 1521 bytes/chars
2025-12-07 16:06:03,340 - handlers.py[DEBUG]: finish: init-local/search-NoCloud: SUCCESS: found local data from DataSourceNoCloud
2025-12-07 16:06:03,341 - stages.py[INFO]: Loaded datasource DataSourceNoCloud - DataSourceNoCloud [seed=/dev/sr0][dsmode=net]
2025-12-07 16:06:03,341 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg (quiet=False)
2025-12-07 16:06:03,341 - util.py[DEBUG]: Read 2796 bytes from /etc/cloud/cloud.cfg
2025-12-07 16:06:03,341 - util.py[DEBUG]: Attempting to load yaml from string of length 2796 with allowed root types (<class 'dict'>,)
2025-12-07 16:06:03,351 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/99-ssh.cfg (quiet=False)
2025-12-07 16:06:03,352 - util.py[DEBUG]: Read 48 bytes from /etc/cloud/cloud.cfg.d/99-ssh.cfg
2025-12-07 16:06:03,352 - util.py[DEBUG]: Attempting to load yaml from string of length 48 with allowed root types (<class 'dict'>,)
2025-12-07 16:06:03,352 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/05_logging.cfg (quiet=False)
2025-12-07 16:06:03,352 - util.py[DEBUG]: Read 2070 bytes from /etc/cloud/cloud.cfg.d/05_logging.cfg
2025-12-07 16:06:03,352 - util.py[DEBUG]: Attempting to load yaml from string of length 2070 with allowed root types (<class 'dict'>,)
2025-12-07 16:06:03,356 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg (quiet=False)
2025-12-07 16:06:03,356 - util.py[DEBUG]: Read 309 bytes from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg
2025-12-07 16:06:03,356 - util.py[DEBUG]: Attempting to load yaml from string of length 309 with allowed root types (<class 'dict'>,)
2025-12-07 16:06:03,359 - util.py[DEBUG]: Reading from /run/cloud-init/cloud.cfg (quiet=False)
2025-12-07 16:06:03,359 - util.py[DEBUG]: Read 35 bytes from /run/cloud-init/cloud.cfg
2025-12-07 16:06:03,359 - util.py[DEBUG]: Attempting to load yaml from string of length 35 with allowed root types (<class 'dict'>,)
2025-12-07 16:06:03,359 - util.py[DEBUG]: Attempting to load yaml from string of length 0 with allowed root types (<class 'dict'>,)
2025-12-07 16:06:03,359 - util.py[DEBUG]: loaded blob returned None, returning default.
2025-12-07 16:06:03,360 - util.py[DEBUG]: Attempting to remove /var/lib/cloud/instance
2025-12-07 16:06:03,360 - util.py[DEBUG]: Creating symbolic link from '/var/lib/cloud/instance' => '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184'
2025-12-07 16:06:03,361 - util.py[DEBUG]: Reading from /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/datasource (quiet=False)
2025-12-07 16:06:03,361 - util.py[DEBUG]: Read 65 bytes from /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/datasource
2025-12-07 16:06:03,361 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/datasource - wb: [644] 65 bytes
2025-12-07 16:06:03,362 - util.py[DEBUG]: Writing to /var/lib/cloud/data/previous-datasource - wb: [644] 65 bytes
2025-12-07 16:06:03,363 - util.py[DEBUG]: Reading from /var/lib/cloud/data/instance-id (quiet=False)
2025-12-07 16:06:03,363 - util.py[DEBUG]: Read 41 bytes from /var/lib/cloud/data/instance-id
2025-12-07 16:06:03,363 - stages.py[DEBUG]: previous iid found to be 3a7b79c34864e435b2e39df1a836248be4942184
2025-12-07 16:06:03,363 - util.py[DEBUG]: Writing to /var/lib/cloud/data/instance-id - wb: [644] 41 bytes
2025-12-07 16:06:03,364 - util.py[DEBUG]: Writing to /run/cloud-init/.instance-id - wb: [644] 41 bytes
2025-12-07 16:06:03,364 - util.py[DEBUG]: Writing to /var/lib/cloud/data/previous-instance-id - wb: [644] 41 bytes
2025-12-07 16:06:03,365 - util.py[DEBUG]: Writing to /var/lib/cloud/instance/obj.pkl - wb: [400] 8298 bytes
2025-12-07 16:06:03,366 - main.py[DEBUG]: [local] init will now be targeting instance id: 3a7b79c34864e435b2e39df1a836248be4942184. new=False
2025-12-07 16:06:03,366 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg (quiet=False)
2025-12-07 16:06:03,366 - util.py[DEBUG]: Read 2796 bytes from /etc/cloud/cloud.cfg
2025-12-07 16:06:03,366 - util.py[DEBUG]: Attempting to load yaml from string of length 2796 with allowed root types (<class 'dict'>,)
2025-12-07 16:06:03,377 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/99-ssh.cfg (quiet=False)
2025-12-07 16:06:03,377 - util.py[DEBUG]: Read 48 bytes from /etc/cloud/cloud.cfg.d/99-ssh.cfg
2025-12-07 16:06:03,377 - util.py[DEBUG]: Attempting to load yaml from string of length 48 with allowed root types (<class 'dict'>,)
2025-12-07 16:06:03,377 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/05_logging.cfg (quiet=False)
2025-12-07 16:06:03,377 - util.py[DEBUG]: Read 2070 bytes from /etc/cloud/cloud.cfg.d/05_logging.cfg
2025-12-07 16:06:03,378 - util.py[DEBUG]: Attempting to load yaml from string of length 2070 with allowed root types (<class 'dict'>,)
2025-12-07 16:06:03,381 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg (quiet=False)
2025-12-07 16:06:03,381 - util.py[DEBUG]: Read 309 bytes from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg
2025-12-07 16:06:03,381 - util.py[DEBUG]: Attempting to load yaml from string of length 309 with allowed root types (<class 'dict'>,)
2025-12-07 16:06:03,384 - util.py[DEBUG]: Reading from /run/cloud-init/cloud.cfg (quiet=False)
2025-12-07 16:06:03,384 - util.py[DEBUG]: Read 35 bytes from /run/cloud-init/cloud.cfg
2025-12-07 16:06:03,384 - util.py[DEBUG]: Attempting to load yaml from string of length 35 with allowed root types (<class 'dict'>,)
2025-12-07 16:06:03,384 - util.py[DEBUG]: Attempting to load yaml from string of length 0 with allowed root types (<class 'dict'>,)
2025-12-07 16:06:03,385 - util.py[DEBUG]: loaded blob returned None, returning default.
2025-12-07 16:06:03,385 - util.py[DEBUG]: Reading from /var/lib/cloud/instance/cloud-config.txt (quiet=False)
2025-12-07 16:06:03,385 - util.py[DEBUG]: Read 1742 bytes from /var/lib/cloud/instance/cloud-config.txt
2025-12-07 16:06:03,385 - util.py[DEBUG]: Attempting to load yaml from string of length 1742 with allowed root types (<class 'dict'>,)
2025-12-07 16:06:03,392 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2025-12-07 16:06:03,392 - util.py[DEBUG]: Reading from /var/lib/cloud/data/set-hostname (quiet=False)
2025-12-07 16:06:03,393 - util.py[DEBUG]: Read 71 bytes from /var/lib/cloud/data/set-hostname
2025-12-07 16:06:03,393 - cc_set_hostname.py[DEBUG]: No hostname changes. Skipping set-hostname
2025-12-07 16:06:03,394 - util.py[DEBUG]: Reading from /sys/class/net/lo/address (quiet=False)
2025-12-07 16:06:03,394 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/lo/address
2025-12-07 16:06:03,394 - util.py[DEBUG]: Reading from /sys/class/net/eth0/address (quiet=False)
2025-12-07 16:06:03,394 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/eth0/address
2025-12-07 16:06:03,395 - stages.py[DEBUG]: Allowed events: {<EventScope.NETWORK: 'network'>: {<EventType.BOOT_NEW_INSTANCE: 'boot-new-instance'>}}
2025-12-07 16:06:03,395 - stages.py[DEBUG]: Event Denied: scopes=['network'] EventType=boot
2025-12-07 16:06:03,395 - stages.py[DEBUG]: Allowed events: {<EventScope.NETWORK: 'network'>: {<EventType.BOOT_NEW_INSTANCE: 'boot-new-instance'>}}
2025-12-07 16:06:03,395 - stages.py[DEBUG]: Event Denied: scopes=['network'] EventType=boot-legacy
2025-12-07 16:06:03,395 - stages.py[DEBUG]: No network config applied. Neither a new instance nor datasource network update allowed
2025-12-07 16:06:03,395 - stages.py[DEBUG]: applying net config names for {'version': 1, 'config': [{'type': 'physical', 'name': 'eth0', 'mac_address': '00:50:56:5e:95:7b', 'subnets': [{'type': 'static', 'address': '109.199.123.73', 'netmask': '255.255.240.0', 'gateway': '109.199.112.1'}, {'type': 'static6', 'address': '2a02:c207:2293:6396:0000:0000:0000:0001/64', 'gateway': 'fe80::1'}]}, {'type': 'nameserver', 'address': ['213.136.95.10', '213.136.95.11', '2a02:c207::1:53']}]}
2025-12-07 16:06:03,395 - util.py[DEBUG]: Reading from /sys/class/net/eth0/device/device (quiet=False)
2025-12-07 16:06:03,395 - util.py[DEBUG]: Read 7 bytes from /sys/class/net/eth0/device/device
2025-12-07 16:06:03,396 - util.py[DEBUG]: Reading from /sys/class/net/lo/addr_assign_type (quiet=False)
2025-12-07 16:06:03,396 - util.py[DEBUG]: Read 2 bytes from /sys/class/net/lo/addr_assign_type
2025-12-07 16:06:03,396 - util.py[DEBUG]: Reading from /sys/class/net/lo/uevent (quiet=False)
2025-12-07 16:06:03,396 - util.py[DEBUG]: Read 23 bytes from /sys/class/net/lo/uevent
2025-12-07 16:06:03,396 - util.py[DEBUG]: Reading from /sys/class/net/lo/address (quiet=False)
2025-12-07 16:06:03,396 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/lo/address
2025-12-07 16:06:03,396 - __init__.py[DEBUG]: ovs-vsctl not in PATH; not detecting Open vSwitch interfaces
2025-12-07 16:06:03,396 - util.py[DEBUG]: Reading from /sys/class/net/lo/device/device (quiet=False)
2025-12-07 16:06:03,396 - util.py[DEBUG]: Reading from /sys/class/net/eth0/addr_assign_type (quiet=False)
2025-12-07 16:06:03,396 - util.py[DEBUG]: Read 2 bytes from /sys/class/net/eth0/addr_assign_type
2025-12-07 16:06:03,396 - util.py[DEBUG]: Reading from /sys/class/net/eth0/uevent (quiet=False)
2025-12-07 16:06:03,396 - util.py[DEBUG]: Read 25 bytes from /sys/class/net/eth0/uevent
2025-12-07 16:06:03,396 - util.py[DEBUG]: Reading from /sys/class/net/eth0/address (quiet=False)
2025-12-07 16:06:03,397 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/eth0/address
2025-12-07 16:06:03,397 - util.py[DEBUG]: Reading from /sys/class/net/eth0/device/device (quiet=False)
2025-12-07 16:06:03,397 - util.py[DEBUG]: Read 7 bytes from /sys/class/net/eth0/device/device
2025-12-07 16:06:03,397 - util.py[DEBUG]: Reading from /sys/class/net/lo/operstate (quiet=False)
2025-12-07 16:06:03,397 - util.py[DEBUG]: Read 8 bytes from /sys/class/net/lo/operstate
2025-12-07 16:06:03,397 - util.py[DEBUG]: Reading from /sys/class/net/eth0/operstate (quiet=False)
2025-12-07 16:06:03,397 - util.py[DEBUG]: Read 5 bytes from /sys/class/net/eth0/operstate
2025-12-07 16:06:03,397 - subp.py[DEBUG]: Running command ['ip', '-6', 'addr', 'show', 'permanent', 'scope', 'global'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 16:06:03,420 - subp.py[DEBUG]: Running command ['ip', '-4', 'addr', 'show'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 16:06:03,426 - __init__.py[DEBUG]: Detected interfaces {'lo': {'downable': False, 'device_id': None, 'driver': None, 'mac': '00:00:00:00:00:00', 'name': 'lo', 'up': True}, 'eth0': {'downable': True, 'device_id': '0x0001', 'driver': 'virtio_net', 'mac': '00:50:56:5e:95:7b', 'name': 'eth0', 'up': False}}
2025-12-07 16:06:03,426 - __init__.py[DEBUG]: no work necessary for renaming of [['00:50:56:5e:95:7b', 'eth0', 'virtio_net', '0x0001']]
2025-12-07 16:06:03,426 - main.py[DEBUG]: [local] Exiting. datasource DataSourceNoCloud [seed=/dev/sr0][dsmode=net] not in local mode.
2025-12-07 16:06:03,427 - atomic_helper.py[DEBUG]: Atomically writing to file /var/lib/cloud/data/status.json (via temporary file /var/lib/cloud/data/tmpu82i9s_1) - w: [644] 515 bytes/chars
2025-12-07 16:06:03,427 - util.py[DEBUG]: Reading from /proc/uptime (quiet=False)
2025-12-07 16:06:03,428 - util.py[DEBUG]: Read 11 bytes from /proc/uptime
2025-12-07 16:06:03,428 - util.py[DEBUG]: cloud-init mode 'init' took 0.377 seconds (0.38)
2025-12-07 16:06:03,428 - handlers.py[DEBUG]: finish: init-local: SUCCESS: searching for local datasources
2025-12-07 16:06:17,779 - util.py[DEBUG]: Cloud-init v. 22.4.2 running 'modules:config' at Sun, 07 Dec 2025 16:06:17 +0000. Up 18.39 seconds.
2025-12-07 16:06:17,780 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:17,780 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:17,783 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:17,783 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:17,784 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:17,785 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:17,786 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:17,786 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:17,788 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:17,788 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:17,790 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:17,790 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:17,792 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:17,792 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:17,795 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:17,795 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:17,798 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:17,798 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:17,799 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:17,800 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:17,801 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:17,802 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:17,803 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:17,803 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:17,805 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:17,805 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:17,806 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2025-12-07 16:06:17,808 - modules.py[INFO]: Skipping modules 'snap,keyboard,apt-pipelining,ntp,disable-ec2-metadata,runcmd' because no applicable config is provided.
2025-12-07 16:06:17,808 - modules.py[DEBUG]: Running module ssh-import-id (<module 'cloudinit.config.cc_ssh_import_id' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_ssh_import_id.py'>) with frequency once-per-instance
2025-12-07 16:06:17,808 - handlers.py[DEBUG]: start: modules-config/config-ssh-import-id: running config-ssh-import-id with frequency once-per-instance
2025-12-07 16:06:17,808 - helpers.py[DEBUG]: config-ssh-import-id already ran (freq=once-per-instance)
2025-12-07 16:06:17,809 - handlers.py[DEBUG]: finish: modules-config/config-ssh-import-id: SUCCESS: config-ssh-import-id previously ran
2025-12-07 16:06:17,809 - modules.py[DEBUG]: Running module locale (<module 'cloudinit.config.cc_locale' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_locale.py'>) with frequency once-per-instance
2025-12-07 16:06:17,809 - handlers.py[DEBUG]: start: modules-config/config-locale: running config-locale with frequency once-per-instance
2025-12-07 16:06:17,809 - helpers.py[DEBUG]: config-locale already ran (freq=once-per-instance)
2025-12-07 16:06:17,809 - handlers.py[DEBUG]: finish: modules-config/config-locale: SUCCESS: config-locale previously ran
2025-12-07 16:06:17,809 - modules.py[DEBUG]: Running module set-passwords (<module 'cloudinit.config.cc_set_passwords' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_set_passwords.py'>) with frequency once-per-instance
2025-12-07 16:06:17,809 - handlers.py[DEBUG]: start: modules-config/config-set-passwords: running config-set-passwords with frequency once-per-instance
2025-12-07 16:06:17,809 - helpers.py[DEBUG]: config-set-passwords already ran (freq=once-per-instance)
2025-12-07 16:06:17,809 - handlers.py[DEBUG]: finish: modules-config/config-set-passwords: SUCCESS: config-set-passwords previously ran
2025-12-07 16:06:17,809 - modules.py[DEBUG]: Running module grub-dpkg (<module 'cloudinit.config.cc_grub_dpkg' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_grub_dpkg.py'>) with frequency once-per-instance
2025-12-07 16:06:17,809 - handlers.py[DEBUG]: start: modules-config/config-grub-dpkg: running config-grub-dpkg with frequency once-per-instance
2025-12-07 16:06:17,809 - helpers.py[DEBUG]: config-grub-dpkg already ran (freq=once-per-instance)
2025-12-07 16:06:17,809 - handlers.py[DEBUG]: finish: modules-config/config-grub-dpkg: SUCCESS: config-grub-dpkg previously ran
2025-12-07 16:06:17,809 - modules.py[DEBUG]: Running module apt-configure (<module 'cloudinit.config.cc_apt_configure' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_apt_configure.py'>) with frequency once-per-instance
2025-12-07 16:06:17,809 - handlers.py[DEBUG]: start: modules-config/config-apt-configure: running config-apt-configure with frequency once-per-instance
2025-12-07 16:06:17,809 - helpers.py[DEBUG]: config-apt-configure already ran (freq=once-per-instance)
2025-12-07 16:06:17,809 - handlers.py[DEBUG]: finish: modules-config/config-apt-configure: SUCCESS: config-apt-configure previously ran
2025-12-07 16:06:17,810 - modules.py[DEBUG]: Running module timezone (<module 'cloudinit.config.cc_timezone' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_timezone.py'>) with frequency once-per-instance
2025-12-07 16:06:17,810 - handlers.py[DEBUG]: start: modules-config/config-timezone: running config-timezone with frequency once-per-instance
2025-12-07 16:06:17,810 - helpers.py[DEBUG]: config-timezone already ran (freq=once-per-instance)
2025-12-07 16:06:17,810 - handlers.py[DEBUG]: finish: modules-config/config-timezone: SUCCESS: config-timezone previously ran
2025-12-07 16:06:17,810 - modules.py[DEBUG]: Running module byobu (<module 'cloudinit.config.cc_byobu' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_byobu.py'>) with frequency once-per-instance
2025-12-07 16:06:17,810 - handlers.py[DEBUG]: start: modules-config/config-byobu: running config-byobu with frequency once-per-instance
2025-12-07 16:06:17,810 - helpers.py[DEBUG]: config-byobu already ran (freq=once-per-instance)
2025-12-07 16:06:17,810 - handlers.py[DEBUG]: finish: modules-config/config-byobu: SUCCESS: config-byobu previously ran
2025-12-07 16:06:17,810 - main.py[DEBUG]: Ran 7 modules with 0 failures
2025-12-07 16:06:17,810 - atomic_helper.py[DEBUG]: Atomically writing to file /var/lib/cloud/data/status.json (via temporary file /var/lib/cloud/data/tmpktvdg7cf) - w: [644] 543 bytes/chars
2025-12-07 16:06:17,811 - util.py[DEBUG]: Reading from /proc/uptime (quiet=False)
2025-12-07 16:06:17,811 - util.py[DEBUG]: Read 12 bytes from /proc/uptime
2025-12-07 16:06:17,811 - util.py[DEBUG]: cloud-init mode 'modules' took 0.094 seconds (0.09)
2025-12-07 16:06:17,811 - handlers.py[DEBUG]: finish: modules-config: SUCCESS: running modules for config
2025-12-07 16:06:18,159 - util.py[DEBUG]: Cloud-init v. 22.4.2 running 'modules:final' at Sun, 07 Dec 2025 16:06:18 +0000. Up 18.77 seconds.
2025-12-07 16:06:18,160 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,160 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,162 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,162 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,164 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,164 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,166 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,166 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,169 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,169 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,172 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,172 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,174 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,174 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,175 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,176 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,177 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,177 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,179 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,179 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,180 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,181 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,182 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,182 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,183 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,183 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,184 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,184 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,186 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,186 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,187 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,187 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,189 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,189 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,190 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,190 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,192 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,192 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,193 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,193 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,194 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,195 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,196 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2025-12-07 16:06:18,198 - modules.py[INFO]: Skipping modules 'fan,landscape,lxd,puppet,chef,mcollective,salt-minion,phone-home,power-state-change' because no applicable config is provided.
2025-12-07 16:06:18,198 - modules.py[DEBUG]: Running module package-update-upgrade-install (<module 'cloudinit.config.cc_package_update_upgrade_install' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_package_update_upgrade_install.py'>) with frequency once-per-instance
2025-12-07 16:06:18,198 - handlers.py[DEBUG]: start: modules-final/config-package-update-upgrade-install: running config-package-update-upgrade-install with frequency once-per-instance
2025-12-07 16:06:18,198 - helpers.py[DEBUG]: config-package-update-upgrade-install already ran (freq=once-per-instance)
2025-12-07 16:06:18,199 - handlers.py[DEBUG]: finish: modules-final/config-package-update-upgrade-install: SUCCESS: config-package-update-upgrade-install previously ran
2025-12-07 16:06:18,199 - modules.py[DEBUG]: Running module write-files-deferred (<module 'cloudinit.config.cc_write_files_deferred' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_write_files_deferred.py'>) with frequency once-per-instance
2025-12-07 16:06:18,199 - handlers.py[DEBUG]: start: modules-final/config-write-files-deferred: running config-write-files-deferred with frequency once-per-instance
2025-12-07 16:06:18,199 - helpers.py[DEBUG]: config-write-files-deferred already ran (freq=once-per-instance)
2025-12-07 16:06:18,199 - handlers.py[DEBUG]: finish: modules-final/config-write-files-deferred: SUCCESS: config-write-files-deferred previously ran
2025-12-07 16:06:18,199 - modules.py[DEBUG]: Running module reset_rmc (<module 'cloudinit.config.cc_reset_rmc' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_reset_rmc.py'>) with frequency once-per-instance
2025-12-07 16:06:18,199 - handlers.py[DEBUG]: start: modules-final/config-reset_rmc: running config-reset_rmc with frequency once-per-instance
2025-12-07 16:06:18,199 - helpers.py[DEBUG]: config-reset_rmc already ran (freq=once-per-instance)
2025-12-07 16:06:18,199 - handlers.py[DEBUG]: finish: modules-final/config-reset_rmc: SUCCESS: config-reset_rmc previously ran
2025-12-07 16:06:18,199 - modules.py[DEBUG]: Running module refresh_rmc_and_interface (<module 'cloudinit.config.cc_refresh_rmc_and_interface' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_refresh_rmc_and_interface.py'>) with frequency always
2025-12-07 16:06:18,199 - handlers.py[DEBUG]: start: modules-final/config-refresh_rmc_and_interface: running config-refresh_rmc_and_interface with frequency always
2025-12-07 16:06:18,199 - helpers.py[DEBUG]: Running config-refresh_rmc_and_interface using lock (<cloudinit.helpers.DummyLock object at 0x7f22ca24ac10>)
2025-12-07 16:06:18,199 - cc_refresh_rmc_and_interface.py[DEBUG]: No 'rmcctrl' in path, disabled
2025-12-07 16:06:18,199 - handlers.py[DEBUG]: finish: modules-final/config-refresh_rmc_and_interface: SUCCESS: config-refresh_rmc_and_interface ran successfully
2025-12-07 16:06:18,199 - modules.py[DEBUG]: Running module rightscale_userdata (<module 'cloudinit.config.cc_rightscale_userdata' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_rightscale_userdata.py'>) with frequency once-per-instance
2025-12-07 16:06:18,200 - handlers.py[DEBUG]: start: modules-final/config-rightscale_userdata: running config-rightscale_userdata with frequency once-per-instance
2025-12-07 16:06:18,200 - helpers.py[DEBUG]: config-rightscale_userdata already ran (freq=once-per-instance)
2025-12-07 16:06:18,200 - handlers.py[DEBUG]: finish: modules-final/config-rightscale_userdata: SUCCESS: config-rightscale_userdata previously ran
2025-12-07 16:06:18,200 - modules.py[DEBUG]: Running module scripts-vendor (<module 'cloudinit.config.cc_scripts_vendor' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_vendor.py'>) with frequency once-per-instance
2025-12-07 16:06:18,200 - handlers.py[DEBUG]: start: modules-final/config-scripts-vendor: running config-scripts-vendor with frequency once-per-instance
2025-12-07 16:06:18,200 - helpers.py[DEBUG]: config-scripts-vendor already ran (freq=once-per-instance)
2025-12-07 16:06:18,200 - handlers.py[DEBUG]: finish: modules-final/config-scripts-vendor: SUCCESS: config-scripts-vendor previously ran
2025-12-07 16:06:18,200 - modules.py[DEBUG]: Running module scripts-per-once (<module 'cloudinit.config.cc_scripts_per_once' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_per_once.py'>) with frequency once
2025-12-07 16:06:18,200 - handlers.py[DEBUG]: start: modules-final/config-scripts-per-once: running config-scripts-per-once with frequency once
2025-12-07 16:06:18,200 - helpers.py[DEBUG]: config-scripts-per-once already ran (freq=once)
2025-12-07 16:06:18,200 - handlers.py[DEBUG]: finish: modules-final/config-scripts-per-once: SUCCESS: config-scripts-per-once previously ran
2025-12-07 16:06:18,200 - modules.py[DEBUG]: Running module scripts-per-boot (<module 'cloudinit.config.cc_scripts_per_boot' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_per_boot.py'>) with frequency always
2025-12-07 16:06:18,200 - handlers.py[DEBUG]: start: modules-final/config-scripts-per-boot: running config-scripts-per-boot with frequency always
2025-12-07 16:06:18,201 - helpers.py[DEBUG]: Running config-scripts-per-boot using lock (<cloudinit.helpers.DummyLock object at 0x7f22ca24b710>)
2025-12-07 16:06:18,201 - handlers.py[DEBUG]: finish: modules-final/config-scripts-per-boot: SUCCESS: config-scripts-per-boot ran successfully
2025-12-07 16:06:18,201 - modules.py[DEBUG]: Running module scripts-per-instance (<module 'cloudinit.config.cc_scripts_per_instance' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_per_instance.py'>) with frequency once-per-instance
2025-12-07 16:06:18,201 - handlers.py[DEBUG]: start: modules-final/config-scripts-per-instance: running config-scripts-per-instance with frequency once-per-instance
2025-12-07 16:06:18,201 - helpers.py[DEBUG]: config-scripts-per-instance already ran (freq=once-per-instance)
2025-12-07 16:06:18,201 - handlers.py[DEBUG]: finish: modules-final/config-scripts-per-instance: SUCCESS: config-scripts-per-instance previously ran
2025-12-07 16:06:18,201 - modules.py[DEBUG]: Running module scripts-user (<module 'cloudinit.config.cc_scripts_user' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_user.py'>) with frequency once-per-instance
2025-12-07 16:06:18,201 - handlers.py[DEBUG]: start: modules-final/config-scripts-user: running config-scripts-user with frequency once-per-instance
2025-12-07 16:06:18,201 - helpers.py[DEBUG]: config-scripts-user already ran (freq=once-per-instance)
2025-12-07 16:06:18,201 - handlers.py[DEBUG]: finish: modules-final/config-scripts-user: SUCCESS: config-scripts-user previously ran
2025-12-07 16:06:18,201 - modules.py[DEBUG]: Running module ssh-authkey-fingerprints (<module 'cloudinit.config.cc_ssh_authkey_fingerprints' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_ssh_authkey_fingerprints.py'>) with frequency once-per-instance
2025-12-07 16:06:18,201 - handlers.py[DEBUG]: start: modules-final/config-ssh-authkey-fingerprints: running config-ssh-authkey-fingerprints with frequency once-per-instance
2025-12-07 16:06:18,201 - helpers.py[DEBUG]: config-ssh-authkey-fingerprints already ran (freq=once-per-instance)
2025-12-07 16:06:18,201 - handlers.py[DEBUG]: finish: modules-final/config-ssh-authkey-fingerprints: SUCCESS: config-ssh-authkey-fingerprints previously ran
2025-12-07 16:06:18,201 - modules.py[DEBUG]: Running module keys-to-console (<module 'cloudinit.config.cc_keys_to_console' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_keys_to_console.py'>) with frequency once-per-instance
2025-12-07 16:06:18,202 - handlers.py[DEBUG]: start: modules-final/config-keys-to-console: running config-keys-to-console with frequency once-per-instance
2025-12-07 16:06:18,202 - helpers.py[DEBUG]: config-keys-to-console already ran (freq=once-per-instance)
2025-12-07 16:06:18,202 - handlers.py[DEBUG]: finish: modules-final/config-keys-to-console: SUCCESS: config-keys-to-console previously ran
2025-12-07 16:06:18,202 - modules.py[DEBUG]: Running module install-hotplug (<module 'cloudinit.config.cc_install_hotplug' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_install_hotplug.py'>) with frequency once-per-instance
2025-12-07 16:06:18,202 - handlers.py[DEBUG]: start: modules-final/config-install-hotplug: running config-install-hotplug with frequency once-per-instance
2025-12-07 16:06:18,202 - helpers.py[DEBUG]: config-install-hotplug already ran (freq=once-per-instance)
2025-12-07 16:06:18,202 - handlers.py[DEBUG]: finish: modules-final/config-install-hotplug: SUCCESS: config-install-hotplug previously ran
2025-12-07 16:06:18,202 - modules.py[DEBUG]: Running module final-message (<module 'cloudinit.config.cc_final_message' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_final_message.py'>) with frequency always
2025-12-07 16:06:18,202 - handlers.py[DEBUG]: start: modules-final/config-final-message: running config-final-message with frequency always
2025-12-07 16:06:18,202 - helpers.py[DEBUG]: Running config-final-message using lock (<cloudinit.helpers.DummyLock object at 0x7f22ca269d10>)
2025-12-07 16:06:18,202 - util.py[DEBUG]: Reading from /proc/uptime (quiet=False)
2025-12-07 16:06:18,202 - util.py[DEBUG]: Read 13 bytes from /proc/uptime
2025-12-07 16:06:18,206 - util.py[DEBUG]: Cloud-init v. 22.4.2 finished at Sun, 07 Dec 2025 16:06:18 +0000. Datasource DataSourceNoCloud [seed=/dev/sr0][dsmode=net].  Up 18.85 seconds
2025-12-07 16:06:18,207 - util.py[DEBUG]: Writing to /var/lib/cloud/instance/boot-finished - wb: [644] 52 bytes
2025-12-07 16:06:18,207 - handlers.py[DEBUG]: finish: modules-final/config-final-message: SUCCESS: config-final-message ran successfully
2025-12-07 16:06:18,207 - main.py[DEBUG]: Ran 14 modules with 0 failures
2025-12-07 16:06:18,207 - atomic_helper.py[DEBUG]: Atomically writing to file /var/lib/cloud/data/status.json (via temporary file /var/lib/cloud/data/tmpw7j4z_t4) - w: [644] 571 bytes/chars
2025-12-07 16:06:18,208 - atomic_helper.py[DEBUG]: Atomically writing to file /var/lib/cloud/data/result.json (via temporary file /var/lib/cloud/data/tmps4347adq) - w: [644] 96 bytes/chars
2025-12-07 16:06:18,208 - util.py[DEBUG]: Creating symbolic link from '/run/cloud-init/result.json' => '../../var/lib/cloud/data/result.json'
2025-12-07 16:06:18,208 - util.py[DEBUG]: Reading from /proc/uptime (quiet=False)
2025-12-07 16:06:18,208 - util.py[DEBUG]: Read 13 bytes from /proc/uptime
2025-12-07 16:06:18,208 - util.py[DEBUG]: cloud-init mode 'modules' took 0.108 seconds (0.11)
2025-12-07 16:06:18,208 - handlers.py[DEBUG]: finish: modules-final: SUCCESS: running modules for final
2025-12-07 16:55:51,379 - util.py[DEBUG]: Cloud-init v. 22.4.2 running 'init-local' at Sun, 07 Dec 2025 16:55:51 +0000. Up 4.04 seconds.
2025-12-07 16:55:51,379 - main.py[DEBUG]: No kernel command line url found.
2025-12-07 16:55:51,379 - main.py[DEBUG]: Closing stdin.
2025-12-07 16:55:51,382 - util.py[DEBUG]: Writing to /var/log/cloud-init.log - ab: [644] 0 bytes
2025-12-07 16:55:51,382 - util.py[DEBUG]: Changing the ownership of /var/log/cloud-init.log to 0:4
2025-12-07 16:55:51,383 - util.py[DEBUG]: Attempting to remove /var/lib/cloud/instance/boot-finished
2025-12-07 16:55:51,383 - handlers.py[DEBUG]: start: init-local/check-cache: attempting to read from cache [check]
2025-12-07 16:55:51,383 - util.py[DEBUG]: Reading from /var/lib/cloud/instance/obj.pkl (quiet=False)
2025-12-07 16:55:51,384 - util.py[DEBUG]: Read 8298 bytes from /var/lib/cloud/instance/obj.pkl
2025-12-07 16:55:51,387 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud/meta-data (quiet=False)
2025-12-07 16:55:51,387 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud-net/meta-data (quiet=False)
2025-12-07 16:55:51,387 - stages.py[DEBUG]: cache invalid in datasource: DataSourceNoCloud [seed=/dev/sr0][dsmode=net]
2025-12-07 16:55:51,387 - handlers.py[DEBUG]: finish: init-local/check-cache: SUCCESS: cache invalid in datasource: DataSourceNoCloud [seed=/dev/sr0][dsmode=net]
2025-12-07 16:55:51,387 - util.py[DEBUG]: Attempting to remove /var/lib/cloud/instance
2025-12-07 16:55:51,389 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2025-12-07 16:55:51,390 - __init__.py[DEBUG]: Looking for data source in: ['NoCloud', 'None'], via packages ['', 'cloudinit.sources'] that matches dependencies ['FILESYSTEM']
2025-12-07 16:55:51,390 - __init__.py[DEBUG]: Searching for local data source in: ['DataSourceNoCloud']
2025-12-07 16:55:51,390 - handlers.py[DEBUG]: start: init-local/search-NoCloud: searching for local data from DataSourceNoCloud
2025-12-07 16:55:51,390 - __init__.py[DEBUG]: Seeing if we can get any data from <class 'cloudinit.sources.DataSourceNoCloud.DataSourceNoCloud'>
2025-12-07 16:55:51,391 - __init__.py[DEBUG]: Update datasource metadata and network config due to events: boot-new-instance
2025-12-07 16:55:51,391 - dmi.py[DEBUG]: querying dmi data /sys/class/dmi/id/product_serial
2025-12-07 16:55:51,391 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud/user-data (quiet=False)
2025-12-07 16:55:51,391 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud/meta-data (quiet=False)
2025-12-07 16:55:51,391 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud/vendor-data (quiet=False)
2025-12-07 16:55:51,391 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud/network-config (quiet=False)
2025-12-07 16:55:51,391 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud-net/user-data (quiet=False)
2025-12-07 16:55:51,391 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud-net/meta-data (quiet=False)
2025-12-07 16:55:51,391 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud-net/vendor-data (quiet=False)
2025-12-07 16:55:51,391 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud-net/network-config (quiet=False)
2025-12-07 16:55:51,391 - subp.py[DEBUG]: Running command ['blkid', '-tTYPE=vfat', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2025-12-07 16:55:51,482 - subp.py[DEBUG]: Running command ['blkid', '-tTYPE=iso9660', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2025-12-07 16:55:51,490 - subp.py[DEBUG]: Running command ['blkid', '-tLABEL=CIDATA', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2025-12-07 16:55:51,498 - subp.py[DEBUG]: Running command ['blkid', '-tLABEL=cidata', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2025-12-07 16:55:51,506 - subp.py[DEBUG]: Running command ['blkid', '-tLABEL_FATBOOT=cidata', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2025-12-07 16:55:51,514 - DataSourceNoCloud.py[DEBUG]: Attempting to use data from /dev/sr0
2025-12-07 16:55:51,515 - util.py[DEBUG]: Reading from /proc/mounts (quiet=False)
2025-12-07 16:55:51,515 - util.py[DEBUG]: Read 1938 bytes from /proc/mounts
2025-12-07 16:55:51,515 - util.py[DEBUG]: Fetched {'sysfs': {'fstype': 'sysfs', 'mountpoint': '/sys', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'proc': {'fstype': 'proc', 'mountpoint': '/proc', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'udev': {'fstype': 'devtmpfs', 'mountpoint': '/dev', 'opts': 'rw,nosuid,relatime,size=6118440k,nr_inodes=1529610,mode=755,inode64'}, 'devpts': {'fstype': 'devpts', 'mountpoint': '/dev/pts', 'opts': 'rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000'}, 'tmpfs': {'fstype': 'tmpfs', 'mountpoint': '/run/lock', 'opts': 'rw,nosuid,nodev,noexec,relatime,size=5120k,inode64'}, '/dev/sda1': {'fstype': 'ext4', 'mountpoint': '/', 'opts': 'rw,relatime,discard,errors=remount-ro'}, 'securityfs': {'fstype': 'securityfs', 'mountpoint': '/sys/kernel/security', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'cgroup2': {'fstype': 'cgroup2', 'mountpoint': '/sys/fs/cgroup', 'opts': 'rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot'}, 'pstore': {'fstype': 'pstore', 'mountpoint': '/sys/fs/pstore', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'bpf': {'fstype': 'bpf', 'mountpoint': '/sys/fs/bpf', 'opts': 'rw,nosuid,nodev,noexec,relatime,mode=700'}, 'systemd-1': {'fstype': 'autofs', 'mountpoint': '/proc/sys/fs/binfmt_misc', 'opts': 'rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=15632'}, 'hugetlbfs': {'fstype': 'hugetlbfs', 'mountpoint': '/dev/hugepages', 'opts': 'rw,relatime,pagesize=2M'}, 'mqueue': {'fstype': 'mqueue', 'mountpoint': '/dev/mqueue', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'debugfs': {'fstype': 'debugfs', 'mountpoint': '/sys/kernel/debug', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'tracefs': {'fstype': 'tracefs', 'mountpoint': '/sys/kernel/tracing', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'fusectl': {'fstype': 'fusectl', 'mountpoint': '/sys/fs/fuse/connections', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'configfs': {'fstype': 'configfs', 'mountpoint': '/sys/kernel/config', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'ramfs': {'fstype': 'ramfs', 'mountpoint': '/run/credentials/systemd-tmpfiles-setup.service', 'opts': 'ro,nosuid,nodev,noexec,relatime,mode=700'}, '/dev/sda15': {'fstype': 'vfat', 'mountpoint': '/boot/efi', 'opts': 'rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro'}} mounts from proc
2025-12-07 16:55:51,515 - subp.py[DEBUG]: Running command ['mount', '-o', 'ro', '-t', 'auto', '/dev/sr0', '/run/cloud-init/tmp/tmpkpzw0qyl'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 16:55:51,605 - util.py[DEBUG]: Reading from /run/cloud-init/tmp/tmpkpzw0qyl//user-data (quiet=False)
2025-12-07 16:55:51,606 - util.py[DEBUG]: Read 1714 bytes from /run/cloud-init/tmp/tmpkpzw0qyl//user-data
2025-12-07 16:55:51,606 - util.py[DEBUG]: Reading from /run/cloud-init/tmp/tmpkpzw0qyl//meta-data (quiet=False)
2025-12-07 16:55:51,607 - util.py[DEBUG]: Read 54 bytes from /run/cloud-init/tmp/tmpkpzw0qyl//meta-data
2025-12-07 16:55:51,607 - util.py[DEBUG]: Reading from /run/cloud-init/tmp/tmpkpzw0qyl//vendor-data (quiet=False)
2025-12-07 16:55:51,607 - util.py[DEBUG]: Read 0 bytes from /run/cloud-init/tmp/tmpkpzw0qyl//vendor-data
2025-12-07 16:55:51,607 - util.py[DEBUG]: Reading from /run/cloud-init/tmp/tmpkpzw0qyl//network-config (quiet=False)
2025-12-07 16:55:51,607 - util.py[DEBUG]: Read 455 bytes from /run/cloud-init/tmp/tmpkpzw0qyl//network-config
2025-12-07 16:55:51,607 - subp.py[DEBUG]: Running command ['umount', '/run/cloud-init/tmp/tmpkpzw0qyl'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 16:55:51,613 - util.py[DEBUG]: Attempting to load yaml from string of length 54 with allowed root types (<class 'dict'>,)
2025-12-07 16:55:51,614 - util.py[DEBUG]: Attempting to load yaml from string of length 455 with allowed root types (<class 'dict'>,)
2025-12-07 16:55:51,617 - DataSourceNoCloud.py[DEBUG]: Using data from /dev/sr0
2025-12-07 16:55:51,618 - util.py[DEBUG]: Reading from /etc/hosts (quiet=False)
2025-12-07 16:55:51,618 - util.py[DEBUG]: Read 565 bytes from /etc/hosts
2025-12-07 16:55:51,620 - util.py[DEBUG]: Writing to /run/cloud-init/cloud-id-nocloud - wb: [644] 8 bytes
2025-12-07 16:55:51,620 - util.py[DEBUG]: Creating symbolic link from '/run/cloud-init/cloud-id' => '/run/cloud-init/cloud-id-nocloud'
2025-12-07 16:55:51,621 - atomic_helper.py[DEBUG]: Atomically writing to file /run/cloud-init/instance-data-sensitive.json (via temporary file /run/cloud-init/tmplyqzunwb) - w: [600] 6783 bytes/chars
2025-12-07 16:55:51,622 - atomic_helper.py[DEBUG]: Atomically writing to file /run/cloud-init/instance-data.json (via temporary file /run/cloud-init/tmpxyne_hgb) - w: [644] 1521 bytes/chars
2025-12-07 16:55:51,622 - handlers.py[DEBUG]: finish: init-local/search-NoCloud: SUCCESS: found local data from DataSourceNoCloud
2025-12-07 16:55:51,622 - stages.py[INFO]: Loaded datasource DataSourceNoCloud - DataSourceNoCloud [seed=/dev/sr0][dsmode=net]
2025-12-07 16:55:51,622 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg (quiet=False)
2025-12-07 16:55:51,623 - util.py[DEBUG]: Read 2796 bytes from /etc/cloud/cloud.cfg
2025-12-07 16:55:51,623 - util.py[DEBUG]: Attempting to load yaml from string of length 2796 with allowed root types (<class 'dict'>,)
2025-12-07 16:55:51,637 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/99-ssh.cfg (quiet=False)
2025-12-07 16:55:51,637 - util.py[DEBUG]: Read 48 bytes from /etc/cloud/cloud.cfg.d/99-ssh.cfg
2025-12-07 16:55:51,638 - util.py[DEBUG]: Attempting to load yaml from string of length 48 with allowed root types (<class 'dict'>,)
2025-12-07 16:55:51,639 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/05_logging.cfg (quiet=False)
2025-12-07 16:55:51,639 - util.py[DEBUG]: Read 2070 bytes from /etc/cloud/cloud.cfg.d/05_logging.cfg
2025-12-07 16:55:51,639 - util.py[DEBUG]: Attempting to load yaml from string of length 2070 with allowed root types (<class 'dict'>,)
2025-12-07 16:55:51,644 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg (quiet=False)
2025-12-07 16:55:51,644 - util.py[DEBUG]: Read 309 bytes from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg
2025-12-07 16:55:51,644 - util.py[DEBUG]: Attempting to load yaml from string of length 309 with allowed root types (<class 'dict'>,)
2025-12-07 16:55:51,647 - util.py[DEBUG]: Reading from /run/cloud-init/cloud.cfg (quiet=False)
2025-12-07 16:55:51,647 - util.py[DEBUG]: Read 35 bytes from /run/cloud-init/cloud.cfg
2025-12-07 16:55:51,647 - util.py[DEBUG]: Attempting to load yaml from string of length 35 with allowed root types (<class 'dict'>,)
2025-12-07 16:55:51,648 - util.py[DEBUG]: Attempting to load yaml from string of length 0 with allowed root types (<class 'dict'>,)
2025-12-07 16:55:51,648 - util.py[DEBUG]: loaded blob returned None, returning default.
2025-12-07 16:55:51,649 - util.py[DEBUG]: Attempting to remove /var/lib/cloud/instance
2025-12-07 16:55:51,649 - util.py[DEBUG]: Creating symbolic link from '/var/lib/cloud/instance' => '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184'
2025-12-07 16:55:51,650 - util.py[DEBUG]: Reading from /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/datasource (quiet=False)
2025-12-07 16:55:51,651 - util.py[DEBUG]: Read 65 bytes from /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/datasource
2025-12-07 16:55:51,651 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/datasource - wb: [644] 65 bytes
2025-12-07 16:55:51,652 - util.py[DEBUG]: Writing to /var/lib/cloud/data/previous-datasource - wb: [644] 65 bytes
2025-12-07 16:55:51,652 - util.py[DEBUG]: Reading from /var/lib/cloud/data/instance-id (quiet=False)
2025-12-07 16:55:51,653 - util.py[DEBUG]: Read 41 bytes from /var/lib/cloud/data/instance-id
2025-12-07 16:55:51,653 - stages.py[DEBUG]: previous iid found to be 3a7b79c34864e435b2e39df1a836248be4942184
2025-12-07 16:55:51,653 - util.py[DEBUG]: Writing to /var/lib/cloud/data/instance-id - wb: [644] 41 bytes
2025-12-07 16:55:51,654 - util.py[DEBUG]: Writing to /run/cloud-init/.instance-id - wb: [644] 41 bytes
2025-12-07 16:55:51,654 - util.py[DEBUG]: Writing to /var/lib/cloud/data/previous-instance-id - wb: [644] 41 bytes
2025-12-07 16:55:51,655 - util.py[DEBUG]: Writing to /var/lib/cloud/instance/obj.pkl - wb: [400] 8298 bytes
2025-12-07 16:55:51,656 - main.py[DEBUG]: [local] init will now be targeting instance id: 3a7b79c34864e435b2e39df1a836248be4942184. new=False
2025-12-07 16:55:51,656 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg (quiet=False)
2025-12-07 16:55:51,656 - util.py[DEBUG]: Read 2796 bytes from /etc/cloud/cloud.cfg
2025-12-07 16:55:51,656 - util.py[DEBUG]: Attempting to load yaml from string of length 2796 with allowed root types (<class 'dict'>,)
2025-12-07 16:55:51,667 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/99-ssh.cfg (quiet=False)
2025-12-07 16:55:51,667 - util.py[DEBUG]: Read 48 bytes from /etc/cloud/cloud.cfg.d/99-ssh.cfg
2025-12-07 16:55:51,667 - util.py[DEBUG]: Attempting to load yaml from string of length 48 with allowed root types (<class 'dict'>,)
2025-12-07 16:55:51,667 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/05_logging.cfg (quiet=False)
2025-12-07 16:55:51,668 - util.py[DEBUG]: Read 2070 bytes from /etc/cloud/cloud.cfg.d/05_logging.cfg
2025-12-07 16:55:51,668 - util.py[DEBUG]: Attempting to load yaml from string of length 2070 with allowed root types (<class 'dict'>,)
2025-12-07 16:55:51,671 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg (quiet=False)
2025-12-07 16:55:51,671 - util.py[DEBUG]: Read 309 bytes from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg
2025-12-07 16:55:51,671 - util.py[DEBUG]: Attempting to load yaml from string of length 309 with allowed root types (<class 'dict'>,)
2025-12-07 16:55:51,675 - util.py[DEBUG]: Reading from /run/cloud-init/cloud.cfg (quiet=False)
2025-12-07 16:55:51,675 - util.py[DEBUG]: Read 35 bytes from /run/cloud-init/cloud.cfg
2025-12-07 16:55:51,675 - util.py[DEBUG]: Attempting to load yaml from string of length 35 with allowed root types (<class 'dict'>,)
2025-12-07 16:55:51,676 - util.py[DEBUG]: Attempting to load yaml from string of length 0 with allowed root types (<class 'dict'>,)
2025-12-07 16:55:51,676 - util.py[DEBUG]: loaded blob returned None, returning default.
2025-12-07 16:55:51,676 - util.py[DEBUG]: Reading from /var/lib/cloud/instance/cloud-config.txt (quiet=False)
2025-12-07 16:55:51,677 - util.py[DEBUG]: Read 1742 bytes from /var/lib/cloud/instance/cloud-config.txt
2025-12-07 16:55:51,677 - util.py[DEBUG]: Attempting to load yaml from string of length 1742 with allowed root types (<class 'dict'>,)
2025-12-07 16:55:51,683 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2025-12-07 16:55:51,684 - util.py[DEBUG]: Reading from /var/lib/cloud/data/set-hostname (quiet=False)
2025-12-07 16:55:51,684 - util.py[DEBUG]: Read 71 bytes from /var/lib/cloud/data/set-hostname
2025-12-07 16:55:51,684 - cc_set_hostname.py[DEBUG]: No hostname changes. Skipping set-hostname
2025-12-07 16:55:51,685 - util.py[DEBUG]: Reading from /sys/class/net/eth0/address (quiet=False)
2025-12-07 16:55:51,686 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/eth0/address
2025-12-07 16:55:51,686 - util.py[DEBUG]: Reading from /sys/class/net/lo/address (quiet=False)
2025-12-07 16:55:51,686 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/lo/address
2025-12-07 16:55:51,687 - stages.py[DEBUG]: Allowed events: {<EventScope.NETWORK: 'network'>: {<EventType.BOOT_NEW_INSTANCE: 'boot-new-instance'>}}
2025-12-07 16:55:51,687 - stages.py[DEBUG]: Event Denied: scopes=['network'] EventType=boot
2025-12-07 16:55:51,687 - stages.py[DEBUG]: Allowed events: {<EventScope.NETWORK: 'network'>: {<EventType.BOOT_NEW_INSTANCE: 'boot-new-instance'>}}
2025-12-07 16:55:51,687 - stages.py[DEBUG]: Event Denied: scopes=['network'] EventType=boot-legacy
2025-12-07 16:55:51,687 - stages.py[DEBUG]: No network config applied. Neither a new instance nor datasource network update allowed
2025-12-07 16:55:51,687 - stages.py[DEBUG]: applying net config names for {'version': 1, 'config': [{'type': 'physical', 'name': 'eth0', 'mac_address': '00:50:56:5e:95:7b', 'subnets': [{'type': 'static', 'address': '109.199.123.73', 'netmask': '255.255.240.0', 'gateway': '109.199.112.1'}, {'type': 'static6', 'address': '2a02:c207:2293:6396:0000:0000:0000:0001/64', 'gateway': 'fe80::1'}]}, {'type': 'nameserver', 'address': ['213.136.95.10', '213.136.95.11', '2a02:c207::1:53']}]}
2025-12-07 16:55:51,687 - util.py[DEBUG]: Reading from /sys/class/net/eth0/device/device (quiet=False)
2025-12-07 16:55:51,687 - util.py[DEBUG]: Read 7 bytes from /sys/class/net/eth0/device/device
2025-12-07 16:55:51,687 - util.py[DEBUG]: Reading from /sys/class/net/eth0/addr_assign_type (quiet=False)
2025-12-07 16:55:51,687 - util.py[DEBUG]: Read 2 bytes from /sys/class/net/eth0/addr_assign_type
2025-12-07 16:55:51,688 - util.py[DEBUG]: Reading from /sys/class/net/eth0/uevent (quiet=False)
2025-12-07 16:55:51,688 - util.py[DEBUG]: Read 25 bytes from /sys/class/net/eth0/uevent
2025-12-07 16:55:51,688 - util.py[DEBUG]: Reading from /sys/class/net/eth0/address (quiet=False)
2025-12-07 16:55:51,688 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/eth0/address
2025-12-07 16:55:51,688 - __init__.py[DEBUG]: ovs-vsctl not in PATH; not detecting Open vSwitch interfaces
2025-12-07 16:55:51,688 - util.py[DEBUG]: Reading from /sys/class/net/eth0/device/device (quiet=False)
2025-12-07 16:55:51,688 - util.py[DEBUG]: Read 7 bytes from /sys/class/net/eth0/device/device
2025-12-07 16:55:51,688 - util.py[DEBUG]: Reading from /sys/class/net/lo/addr_assign_type (quiet=False)
2025-12-07 16:55:51,688 - util.py[DEBUG]: Read 2 bytes from /sys/class/net/lo/addr_assign_type
2025-12-07 16:55:51,688 - util.py[DEBUG]: Reading from /sys/class/net/lo/uevent (quiet=False)
2025-12-07 16:55:51,688 - util.py[DEBUG]: Read 23 bytes from /sys/class/net/lo/uevent
2025-12-07 16:55:51,688 - util.py[DEBUG]: Reading from /sys/class/net/lo/address (quiet=False)
2025-12-07 16:55:51,689 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/lo/address
2025-12-07 16:55:51,689 - util.py[DEBUG]: Reading from /sys/class/net/lo/device/device (quiet=False)
2025-12-07 16:55:51,689 - util.py[DEBUG]: Reading from /sys/class/net/eth0/operstate (quiet=False)
2025-12-07 16:55:51,689 - util.py[DEBUG]: Read 5 bytes from /sys/class/net/eth0/operstate
2025-12-07 16:55:51,689 - util.py[DEBUG]: Reading from /sys/class/net/lo/operstate (quiet=False)
2025-12-07 16:55:51,689 - util.py[DEBUG]: Read 8 bytes from /sys/class/net/lo/operstate
2025-12-07 16:55:51,689 - subp.py[DEBUG]: Running command ['ip', '-6', 'addr', 'show', 'permanent', 'scope', 'global'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 16:55:51,702 - subp.py[DEBUG]: Running command ['ip', '-4', 'addr', 'show'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 16:55:51,707 - __init__.py[DEBUG]: Detected interfaces {'eth0': {'downable': True, 'device_id': '0x0001', 'driver': 'virtio_net', 'mac': '00:50:56:5e:95:7b', 'name': 'eth0', 'up': False}, 'lo': {'downable': False, 'device_id': None, 'driver': None, 'mac': '00:00:00:00:00:00', 'name': 'lo', 'up': True}}
2025-12-07 16:55:51,707 - __init__.py[DEBUG]: no work necessary for renaming of [['00:50:56:5e:95:7b', 'eth0', 'virtio_net', '0x0001']]
2025-12-07 16:55:51,707 - main.py[DEBUG]: [local] Exiting. datasource DataSourceNoCloud [seed=/dev/sr0][dsmode=net] not in local mode.
2025-12-07 16:55:51,708 - atomic_helper.py[DEBUG]: Atomically writing to file /var/lib/cloud/data/status.json (via temporary file /var/lib/cloud/data/tmpzou4rwt9) - w: [644] 518 bytes/chars
2025-12-07 16:55:51,708 - util.py[DEBUG]: Reading from /proc/uptime (quiet=False)
2025-12-07 16:55:51,708 - util.py[DEBUG]: Read 11 bytes from /proc/uptime
2025-12-07 16:55:51,708 - util.py[DEBUG]: cloud-init mode 'init' took 0.372 seconds (0.37)
2025-12-07 16:55:51,709 - handlers.py[DEBUG]: finish: init-local: SUCCESS: searching for local datasources
2025-12-07 16:56:05,743 - util.py[DEBUG]: Cloud-init v. 22.4.2 running 'modules:config' at Sun, 07 Dec 2025 16:56:05 +0000. Up 18.39 seconds.
2025-12-07 16:56:05,746 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:05,746 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:05,748 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:05,749 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:05,750 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:05,750 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:05,752 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:05,752 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:05,753 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:05,754 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:05,755 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:05,756 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:05,757 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:05,757 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:05,759 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:05,759 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:05,762 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:05,762 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:05,764 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:05,764 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:05,765 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:05,765 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:05,767 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:05,767 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:05,768 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:05,768 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:05,769 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2025-12-07 16:56:05,771 - modules.py[INFO]: Skipping modules 'snap,keyboard,apt-pipelining,ntp,disable-ec2-metadata,runcmd' because no applicable config is provided.
2025-12-07 16:56:05,771 - modules.py[DEBUG]: Running module ssh-import-id (<module 'cloudinit.config.cc_ssh_import_id' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_ssh_import_id.py'>) with frequency once-per-instance
2025-12-07 16:56:05,771 - handlers.py[DEBUG]: start: modules-config/config-ssh-import-id: running config-ssh-import-id with frequency once-per-instance
2025-12-07 16:56:05,772 - helpers.py[DEBUG]: config-ssh-import-id already ran (freq=once-per-instance)
2025-12-07 16:56:05,772 - handlers.py[DEBUG]: finish: modules-config/config-ssh-import-id: SUCCESS: config-ssh-import-id previously ran
2025-12-07 16:56:05,772 - modules.py[DEBUG]: Running module locale (<module 'cloudinit.config.cc_locale' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_locale.py'>) with frequency once-per-instance
2025-12-07 16:56:05,772 - handlers.py[DEBUG]: start: modules-config/config-locale: running config-locale with frequency once-per-instance
2025-12-07 16:56:05,772 - helpers.py[DEBUG]: config-locale already ran (freq=once-per-instance)
2025-12-07 16:56:05,772 - handlers.py[DEBUG]: finish: modules-config/config-locale: SUCCESS: config-locale previously ran
2025-12-07 16:56:05,772 - modules.py[DEBUG]: Running module set-passwords (<module 'cloudinit.config.cc_set_passwords' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_set_passwords.py'>) with frequency once-per-instance
2025-12-07 16:56:05,772 - handlers.py[DEBUG]: start: modules-config/config-set-passwords: running config-set-passwords with frequency once-per-instance
2025-12-07 16:56:05,772 - helpers.py[DEBUG]: config-set-passwords already ran (freq=once-per-instance)
2025-12-07 16:56:05,772 - handlers.py[DEBUG]: finish: modules-config/config-set-passwords: SUCCESS: config-set-passwords previously ran
2025-12-07 16:56:05,772 - modules.py[DEBUG]: Running module grub-dpkg (<module 'cloudinit.config.cc_grub_dpkg' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_grub_dpkg.py'>) with frequency once-per-instance
2025-12-07 16:56:05,772 - handlers.py[DEBUG]: start: modules-config/config-grub-dpkg: running config-grub-dpkg with frequency once-per-instance
2025-12-07 16:56:05,772 - helpers.py[DEBUG]: config-grub-dpkg already ran (freq=once-per-instance)
2025-12-07 16:56:05,772 - handlers.py[DEBUG]: finish: modules-config/config-grub-dpkg: SUCCESS: config-grub-dpkg previously ran
2025-12-07 16:56:05,772 - modules.py[DEBUG]: Running module apt-configure (<module 'cloudinit.config.cc_apt_configure' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_apt_configure.py'>) with frequency once-per-instance
2025-12-07 16:56:05,772 - handlers.py[DEBUG]: start: modules-config/config-apt-configure: running config-apt-configure with frequency once-per-instance
2025-12-07 16:56:05,772 - helpers.py[DEBUG]: config-apt-configure already ran (freq=once-per-instance)
2025-12-07 16:56:05,773 - handlers.py[DEBUG]: finish: modules-config/config-apt-configure: SUCCESS: config-apt-configure previously ran
2025-12-07 16:56:05,773 - modules.py[DEBUG]: Running module timezone (<module 'cloudinit.config.cc_timezone' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_timezone.py'>) with frequency once-per-instance
2025-12-07 16:56:05,773 - handlers.py[DEBUG]: start: modules-config/config-timezone: running config-timezone with frequency once-per-instance
2025-12-07 16:56:05,773 - helpers.py[DEBUG]: config-timezone already ran (freq=once-per-instance)
2025-12-07 16:56:05,773 - handlers.py[DEBUG]: finish: modules-config/config-timezone: SUCCESS: config-timezone previously ran
2025-12-07 16:56:05,773 - modules.py[DEBUG]: Running module byobu (<module 'cloudinit.config.cc_byobu' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_byobu.py'>) with frequency once-per-instance
2025-12-07 16:56:05,773 - handlers.py[DEBUG]: start: modules-config/config-byobu: running config-byobu with frequency once-per-instance
2025-12-07 16:56:05,773 - helpers.py[DEBUG]: config-byobu already ran (freq=once-per-instance)
2025-12-07 16:56:05,773 - handlers.py[DEBUG]: finish: modules-config/config-byobu: SUCCESS: config-byobu previously ran
2025-12-07 16:56:05,773 - main.py[DEBUG]: Ran 7 modules with 0 failures
2025-12-07 16:56:05,773 - atomic_helper.py[DEBUG]: Atomically writing to file /var/lib/cloud/data/status.json (via temporary file /var/lib/cloud/data/tmp27h75ejm) - w: [644] 546 bytes/chars
2025-12-07 16:56:05,773 - util.py[DEBUG]: Reading from /proc/uptime (quiet=False)
2025-12-07 16:56:05,774 - util.py[DEBUG]: Read 12 bytes from /proc/uptime
2025-12-07 16:56:05,774 - util.py[DEBUG]: cloud-init mode 'modules' took 0.103 seconds (0.11)
2025-12-07 16:56:05,774 - handlers.py[DEBUG]: finish: modules-config: SUCCESS: running modules for config
2025-12-07 16:56:06,117 - util.py[DEBUG]: Cloud-init v. 22.4.2 running 'modules:final' at Sun, 07 Dec 2025 16:56:06 +0000. Up 18.77 seconds.
2025-12-07 16:56:06,120 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,120 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,122 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,122 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,123 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,123 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,126 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,126 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,129 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,129 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,131 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,131 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,133 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,133 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,135 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,135 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,136 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,136 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,139 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,139 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,140 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,141 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,142 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,142 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,144 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,144 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,145 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,145 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,147 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,147 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,149 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,149 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,151 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,151 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,152 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,153 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,154 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,154 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,156 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,156 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,157 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,157 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,158 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2025-12-07 16:56:06,160 - modules.py[INFO]: Skipping modules 'fan,landscape,lxd,puppet,chef,mcollective,salt-minion,phone-home,power-state-change' because no applicable config is provided.
2025-12-07 16:56:06,161 - modules.py[DEBUG]: Running module package-update-upgrade-install (<module 'cloudinit.config.cc_package_update_upgrade_install' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_package_update_upgrade_install.py'>) with frequency once-per-instance
2025-12-07 16:56:06,161 - handlers.py[DEBUG]: start: modules-final/config-package-update-upgrade-install: running config-package-update-upgrade-install with frequency once-per-instance
2025-12-07 16:56:06,161 - helpers.py[DEBUG]: config-package-update-upgrade-install already ran (freq=once-per-instance)
2025-12-07 16:56:06,161 - handlers.py[DEBUG]: finish: modules-final/config-package-update-upgrade-install: SUCCESS: config-package-update-upgrade-install previously ran
2025-12-07 16:56:06,161 - modules.py[DEBUG]: Running module write-files-deferred (<module 'cloudinit.config.cc_write_files_deferred' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_write_files_deferred.py'>) with frequency once-per-instance
2025-12-07 16:56:06,161 - handlers.py[DEBUG]: start: modules-final/config-write-files-deferred: running config-write-files-deferred with frequency once-per-instance
2025-12-07 16:56:06,161 - helpers.py[DEBUG]: config-write-files-deferred already ran (freq=once-per-instance)
2025-12-07 16:56:06,161 - handlers.py[DEBUG]: finish: modules-final/config-write-files-deferred: SUCCESS: config-write-files-deferred previously ran
2025-12-07 16:56:06,161 - modules.py[DEBUG]: Running module reset_rmc (<module 'cloudinit.config.cc_reset_rmc' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_reset_rmc.py'>) with frequency once-per-instance
2025-12-07 16:56:06,161 - handlers.py[DEBUG]: start: modules-final/config-reset_rmc: running config-reset_rmc with frequency once-per-instance
2025-12-07 16:56:06,161 - helpers.py[DEBUG]: config-reset_rmc already ran (freq=once-per-instance)
2025-12-07 16:56:06,161 - handlers.py[DEBUG]: finish: modules-final/config-reset_rmc: SUCCESS: config-reset_rmc previously ran
2025-12-07 16:56:06,161 - modules.py[DEBUG]: Running module refresh_rmc_and_interface (<module 'cloudinit.config.cc_refresh_rmc_and_interface' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_refresh_rmc_and_interface.py'>) with frequency always
2025-12-07 16:56:06,162 - handlers.py[DEBUG]: start: modules-final/config-refresh_rmc_and_interface: running config-refresh_rmc_and_interface with frequency always
2025-12-07 16:56:06,162 - helpers.py[DEBUG]: Running config-refresh_rmc_and_interface using lock (<cloudinit.helpers.DummyLock object at 0x7fc995c076d0>)
2025-12-07 16:56:06,162 - cc_refresh_rmc_and_interface.py[DEBUG]: No 'rmcctrl' in path, disabled
2025-12-07 16:56:06,162 - handlers.py[DEBUG]: finish: modules-final/config-refresh_rmc_and_interface: SUCCESS: config-refresh_rmc_and_interface ran successfully
2025-12-07 16:56:06,162 - modules.py[DEBUG]: Running module rightscale_userdata (<module 'cloudinit.config.cc_rightscale_userdata' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_rightscale_userdata.py'>) with frequency once-per-instance
2025-12-07 16:56:06,162 - handlers.py[DEBUG]: start: modules-final/config-rightscale_userdata: running config-rightscale_userdata with frequency once-per-instance
2025-12-07 16:56:06,162 - helpers.py[DEBUG]: config-rightscale_userdata already ran (freq=once-per-instance)
2025-12-07 16:56:06,162 - handlers.py[DEBUG]: finish: modules-final/config-rightscale_userdata: SUCCESS: config-rightscale_userdata previously ran
2025-12-07 16:56:06,162 - modules.py[DEBUG]: Running module scripts-vendor (<module 'cloudinit.config.cc_scripts_vendor' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_vendor.py'>) with frequency once-per-instance
2025-12-07 16:56:06,162 - handlers.py[DEBUG]: start: modules-final/config-scripts-vendor: running config-scripts-vendor with frequency once-per-instance
2025-12-07 16:56:06,162 - helpers.py[DEBUG]: config-scripts-vendor already ran (freq=once-per-instance)
2025-12-07 16:56:06,162 - handlers.py[DEBUG]: finish: modules-final/config-scripts-vendor: SUCCESS: config-scripts-vendor previously ran
2025-12-07 16:56:06,162 - modules.py[DEBUG]: Running module scripts-per-once (<module 'cloudinit.config.cc_scripts_per_once' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_per_once.py'>) with frequency once
2025-12-07 16:56:06,162 - handlers.py[DEBUG]: start: modules-final/config-scripts-per-once: running config-scripts-per-once with frequency once
2025-12-07 16:56:06,163 - helpers.py[DEBUG]: config-scripts-per-once already ran (freq=once)
2025-12-07 16:56:06,163 - handlers.py[DEBUG]: finish: modules-final/config-scripts-per-once: SUCCESS: config-scripts-per-once previously ran
2025-12-07 16:56:06,163 - modules.py[DEBUG]: Running module scripts-per-boot (<module 'cloudinit.config.cc_scripts_per_boot' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_per_boot.py'>) with frequency always
2025-12-07 16:56:06,163 - handlers.py[DEBUG]: start: modules-final/config-scripts-per-boot: running config-scripts-per-boot with frequency always
2025-12-07 16:56:06,163 - helpers.py[DEBUG]: Running config-scripts-per-boot using lock (<cloudinit.helpers.DummyLock object at 0x7fc995c06210>)
2025-12-07 16:56:06,163 - handlers.py[DEBUG]: finish: modules-final/config-scripts-per-boot: SUCCESS: config-scripts-per-boot ran successfully
2025-12-07 16:56:06,163 - modules.py[DEBUG]: Running module scripts-per-instance (<module 'cloudinit.config.cc_scripts_per_instance' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_per_instance.py'>) with frequency once-per-instance
2025-12-07 16:56:06,163 - handlers.py[DEBUG]: start: modules-final/config-scripts-per-instance: running config-scripts-per-instance with frequency once-per-instance
2025-12-07 16:56:06,163 - helpers.py[DEBUG]: config-scripts-per-instance already ran (freq=once-per-instance)
2025-12-07 16:56:06,163 - handlers.py[DEBUG]: finish: modules-final/config-scripts-per-instance: SUCCESS: config-scripts-per-instance previously ran
2025-12-07 16:56:06,163 - modules.py[DEBUG]: Running module scripts-user (<module 'cloudinit.config.cc_scripts_user' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_user.py'>) with frequency once-per-instance
2025-12-07 16:56:06,164 - handlers.py[DEBUG]: start: modules-final/config-scripts-user: running config-scripts-user with frequency once-per-instance
2025-12-07 16:56:06,164 - helpers.py[DEBUG]: config-scripts-user already ran (freq=once-per-instance)
2025-12-07 16:56:06,164 - handlers.py[DEBUG]: finish: modules-final/config-scripts-user: SUCCESS: config-scripts-user previously ran
2025-12-07 16:56:06,164 - modules.py[DEBUG]: Running module ssh-authkey-fingerprints (<module 'cloudinit.config.cc_ssh_authkey_fingerprints' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_ssh_authkey_fingerprints.py'>) with frequency once-per-instance
2025-12-07 16:56:06,164 - handlers.py[DEBUG]: start: modules-final/config-ssh-authkey-fingerprints: running config-ssh-authkey-fingerprints with frequency once-per-instance
2025-12-07 16:56:06,164 - helpers.py[DEBUG]: config-ssh-authkey-fingerprints already ran (freq=once-per-instance)
2025-12-07 16:56:06,164 - handlers.py[DEBUG]: finish: modules-final/config-ssh-authkey-fingerprints: SUCCESS: config-ssh-authkey-fingerprints previously ran
2025-12-07 16:56:06,164 - modules.py[DEBUG]: Running module keys-to-console (<module 'cloudinit.config.cc_keys_to_console' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_keys_to_console.py'>) with frequency once-per-instance
2025-12-07 16:56:06,164 - handlers.py[DEBUG]: start: modules-final/config-keys-to-console: running config-keys-to-console with frequency once-per-instance
2025-12-07 16:56:06,164 - helpers.py[DEBUG]: config-keys-to-console already ran (freq=once-per-instance)
2025-12-07 16:56:06,164 - handlers.py[DEBUG]: finish: modules-final/config-keys-to-console: SUCCESS: config-keys-to-console previously ran
2025-12-07 16:56:06,164 - modules.py[DEBUG]: Running module install-hotplug (<module 'cloudinit.config.cc_install_hotplug' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_install_hotplug.py'>) with frequency once-per-instance
2025-12-07 16:56:06,164 - handlers.py[DEBUG]: start: modules-final/config-install-hotplug: running config-install-hotplug with frequency once-per-instance
2025-12-07 16:56:06,164 - helpers.py[DEBUG]: config-install-hotplug already ran (freq=once-per-instance)
2025-12-07 16:56:06,164 - handlers.py[DEBUG]: finish: modules-final/config-install-hotplug: SUCCESS: config-install-hotplug previously ran
2025-12-07 16:56:06,165 - modules.py[DEBUG]: Running module final-message (<module 'cloudinit.config.cc_final_message' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_final_message.py'>) with frequency always
2025-12-07 16:56:06,165 - handlers.py[DEBUG]: start: modules-final/config-final-message: running config-final-message with frequency always
2025-12-07 16:56:06,165 - helpers.py[DEBUG]: Running config-final-message using lock (<cloudinit.helpers.DummyLock object at 0x7fc995bfc0d0>)
2025-12-07 16:56:06,165 - util.py[DEBUG]: Reading from /proc/uptime (quiet=False)
2025-12-07 16:56:06,165 - util.py[DEBUG]: Read 12 bytes from /proc/uptime
2025-12-07 16:56:06,169 - util.py[DEBUG]: Cloud-init v. 22.4.2 finished at Sun, 07 Dec 2025 16:56:06 +0000. Datasource DataSourceNoCloud [seed=/dev/sr0][dsmode=net].  Up 18.85 seconds
2025-12-07 16:56:06,169 - util.py[DEBUG]: Writing to /var/lib/cloud/instance/boot-finished - wb: [644] 52 bytes
2025-12-07 16:56:06,169 - handlers.py[DEBUG]: finish: modules-final/config-final-message: SUCCESS: config-final-message ran successfully
2025-12-07 16:56:06,169 - main.py[DEBUG]: Ran 14 modules with 0 failures
2025-12-07 16:56:06,171 - atomic_helper.py[DEBUG]: Atomically writing to file /var/lib/cloud/data/status.json (via temporary file /var/lib/cloud/data/tmpdphmv7at) - w: [644] 574 bytes/chars
2025-12-07 16:56:06,171 - atomic_helper.py[DEBUG]: Atomically writing to file /var/lib/cloud/data/result.json (via temporary file /var/lib/cloud/data/tmp2qdc0ire) - w: [644] 96 bytes/chars
2025-12-07 16:56:06,172 - util.py[DEBUG]: Creating symbolic link from '/run/cloud-init/result.json' => '../../var/lib/cloud/data/result.json'
2025-12-07 16:56:06,172 - util.py[DEBUG]: Reading from /proc/uptime (quiet=False)
2025-12-07 16:56:06,172 - util.py[DEBUG]: Read 12 bytes from /proc/uptime
2025-12-07 16:56:06,172 - util.py[DEBUG]: cloud-init mode 'modules' took 0.111 seconds (0.11)
2025-12-07 16:56:06,172 - handlers.py[DEBUG]: finish: modules-final: SUCCESS: running modules for final
2026-01-13 22:24:47,630 - util.py[DEBUG]: Cloud-init v. 22.4.2 running 'init-local' at Tue, 13 Jan 2026 22:24:47 +0000. Up 4.43 seconds.
2026-01-13 22:24:47,631 - main.py[DEBUG]: No kernel command line url found.
2026-01-13 22:24:47,631 - main.py[DEBUG]: Closing stdin.
2026-01-13 22:24:47,632 - util.py[DEBUG]: Writing to /var/log/cloud-init.log - ab: [644] 0 bytes
2026-01-13 22:24:47,633 - util.py[DEBUG]: Changing the ownership of /var/log/cloud-init.log to 0:4
2026-01-13 22:24:47,634 - util.py[DEBUG]: Attempting to remove /var/lib/cloud/instance/boot-finished
2026-01-13 22:24:47,634 - handlers.py[DEBUG]: start: init-local/check-cache: attempting to read from cache [check]
2026-01-13 22:24:47,634 - util.py[DEBUG]: Reading from /var/lib/cloud/instance/obj.pkl (quiet=False)
2026-01-13 22:24:47,635 - util.py[DEBUG]: Read 8298 bytes from /var/lib/cloud/instance/obj.pkl
2026-01-13 22:24:47,638 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud/meta-data (quiet=False)
2026-01-13 22:24:47,639 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud-net/meta-data (quiet=False)
2026-01-13 22:24:47,639 - stages.py[DEBUG]: cache invalid in datasource: DataSourceNoCloud [seed=/dev/sr0][dsmode=net]
2026-01-13 22:24:47,639 - handlers.py[DEBUG]: finish: init-local/check-cache: SUCCESS: cache invalid in datasource: DataSourceNoCloud [seed=/dev/sr0][dsmode=net]
2026-01-13 22:24:47,639 - util.py[DEBUG]: Attempting to remove /var/lib/cloud/instance
2026-01-13 22:24:47,642 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2026-01-13 22:24:47,642 - __init__.py[DEBUG]: Looking for data source in: ['NoCloud', 'None'], via packages ['', 'cloudinit.sources'] that matches dependencies ['FILESYSTEM']
2026-01-13 22:24:47,643 - __init__.py[DEBUG]: Searching for local data source in: ['DataSourceNoCloud']
2026-01-13 22:24:47,643 - handlers.py[DEBUG]: start: init-local/search-NoCloud: searching for local data from DataSourceNoCloud
2026-01-13 22:24:47,643 - __init__.py[DEBUG]: Seeing if we can get any data from <class 'cloudinit.sources.DataSourceNoCloud.DataSourceNoCloud'>
2026-01-13 22:24:47,643 - __init__.py[DEBUG]: Update datasource metadata and network config due to events: boot-new-instance
2026-01-13 22:24:47,643 - dmi.py[DEBUG]: querying dmi data /sys/class/dmi/id/product_serial
2026-01-13 22:24:47,643 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud/user-data (quiet=False)
2026-01-13 22:24:47,643 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud/meta-data (quiet=False)
2026-01-13 22:24:47,643 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud/vendor-data (quiet=False)
2026-01-13 22:24:47,643 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud/network-config (quiet=False)
2026-01-13 22:24:47,643 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud-net/user-data (quiet=False)
2026-01-13 22:24:47,644 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud-net/meta-data (quiet=False)
2026-01-13 22:24:47,644 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud-net/vendor-data (quiet=False)
2026-01-13 22:24:47,644 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud-net/network-config (quiet=False)
2026-01-13 22:24:47,644 - subp.py[DEBUG]: Running command ['blkid', '-tTYPE=vfat', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2026-01-13 22:24:47,748 - subp.py[DEBUG]: Running command ['blkid', '-tTYPE=iso9660', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2026-01-13 22:24:47,757 - subp.py[DEBUG]: Running command ['blkid', '-tLABEL=CIDATA', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2026-01-13 22:24:47,766 - subp.py[DEBUG]: Running command ['blkid', '-tLABEL=cidata', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2026-01-13 22:24:47,776 - subp.py[DEBUG]: Running command ['blkid', '-tLABEL_FATBOOT=cidata', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2026-01-13 22:24:47,783 - DataSourceNoCloud.py[DEBUG]: Attempting to use data from /dev/sr0
2026-01-13 22:24:47,784 - util.py[DEBUG]: Reading from /proc/mounts (quiet=False)
2026-01-13 22:24:47,784 - util.py[DEBUG]: Read 2023 bytes from /proc/mounts
2026-01-13 22:24:47,784 - util.py[DEBUG]: Fetched {'sysfs': {'fstype': 'sysfs', 'mountpoint': '/sys', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'proc': {'fstype': 'proc', 'mountpoint': '/proc', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'udev': {'fstype': 'devtmpfs', 'mountpoint': '/dev', 'opts': 'rw,nosuid,relatime,size=6118004k,nr_inodes=1529501,mode=755,inode64'}, 'devpts': {'fstype': 'devpts', 'mountpoint': '/dev/pts', 'opts': 'rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000'}, 'tmpfs': {'fstype': 'tmpfs', 'mountpoint': '/run/lock', 'opts': 'rw,nosuid,nodev,noexec,relatime,size=5120k,inode64'}, '/dev/sda1': {'fstype': 'ext4', 'mountpoint': '/', 'opts': 'rw,relatime,discard,errors=remount-ro'}, 'securityfs': {'fstype': 'securityfs', 'mountpoint': '/sys/kernel/security', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'cgroup2': {'fstype': 'cgroup2', 'mountpoint': '/sys/fs/cgroup', 'opts': 'rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot'}, 'pstore': {'fstype': 'pstore', 'mountpoint': '/sys/fs/pstore', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'bpf': {'fstype': 'bpf', 'mountpoint': '/sys/fs/bpf', 'opts': 'rw,nosuid,nodev,noexec,relatime,mode=700'}, 'systemd-1': {'fstype': 'autofs', 'mountpoint': '/proc/sys/fs/binfmt_misc', 'opts': 'rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=15639'}, 'hugetlbfs': {'fstype': 'hugetlbfs', 'mountpoint': '/dev/hugepages', 'opts': 'rw,relatime,pagesize=2M'}, 'mqueue': {'fstype': 'mqueue', 'mountpoint': '/dev/mqueue', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'debugfs': {'fstype': 'debugfs', 'mountpoint': '/sys/kernel/debug', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'tracefs': {'fstype': 'tracefs', 'mountpoint': '/sys/kernel/tracing', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'fusectl': {'fstype': 'fusectl', 'mountpoint': '/sys/fs/fuse/connections', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'configfs': {'fstype': 'configfs', 'mountpoint': '/sys/kernel/config', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'ramfs': {'fstype': 'ramfs', 'mountpoint': '/run/credentials/systemd-tmpfiles-setup.service', 'opts': 'ro,nosuid,nodev,noexec,relatime,mode=700'}, '/dev/sda15': {'fstype': 'vfat', 'mountpoint': '/boot/efi', 'opts': 'rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro'}, 'binfmt_misc': {'fstype': 'binfmt_misc', 'mountpoint': '/proc/sys/fs/binfmt_misc', 'opts': 'rw,nosuid,nodev,noexec,relatime'}} mounts from proc
2026-01-13 22:24:47,784 - subp.py[DEBUG]: Running command ['mount', '-o', 'ro', '-t', 'auto', '/dev/sr0', '/run/cloud-init/tmp/tmpsmdbbtp0'] with allowed return codes [0] (shell=False, capture=True)
2026-01-13 22:24:47,874 - util.py[DEBUG]: Reading from /run/cloud-init/tmp/tmpsmdbbtp0//user-data (quiet=False)
2026-01-13 22:24:47,875 - util.py[DEBUG]: Read 1714 bytes from /run/cloud-init/tmp/tmpsmdbbtp0//user-data
2026-01-13 22:24:47,875 - util.py[DEBUG]: Reading from /run/cloud-init/tmp/tmpsmdbbtp0//meta-data (quiet=False)
2026-01-13 22:24:47,876 - util.py[DEBUG]: Read 54 bytes from /run/cloud-init/tmp/tmpsmdbbtp0//meta-data
2026-01-13 22:24:47,876 - util.py[DEBUG]: Reading from /run/cloud-init/tmp/tmpsmdbbtp0//vendor-data (quiet=False)
2026-01-13 22:24:47,876 - util.py[DEBUG]: Read 0 bytes from /run/cloud-init/tmp/tmpsmdbbtp0//vendor-data
2026-01-13 22:24:47,876 - util.py[DEBUG]: Reading from /run/cloud-init/tmp/tmpsmdbbtp0//network-config (quiet=False)
2026-01-13 22:24:47,877 - util.py[DEBUG]: Read 455 bytes from /run/cloud-init/tmp/tmpsmdbbtp0//network-config
2026-01-13 22:24:47,877 - subp.py[DEBUG]: Running command ['umount', '/run/cloud-init/tmp/tmpsmdbbtp0'] with allowed return codes [0] (shell=False, capture=True)
2026-01-13 22:24:47,881 - util.py[DEBUG]: Attempting to load yaml from string of length 54 with allowed root types (<class 'dict'>,)
2026-01-13 22:24:47,883 - util.py[DEBUG]: Attempting to load yaml from string of length 455 with allowed root types (<class 'dict'>,)
2026-01-13 22:24:47,886 - DataSourceNoCloud.py[DEBUG]: Using data from /dev/sr0
2026-01-13 22:24:47,886 - util.py[DEBUG]: Reading from /etc/hosts (quiet=False)
2026-01-13 22:24:47,886 - util.py[DEBUG]: Read 565 bytes from /etc/hosts
2026-01-13 22:24:47,887 - util.py[DEBUG]: Writing to /run/cloud-init/cloud-id-nocloud - wb: [644] 8 bytes
2026-01-13 22:24:47,888 - util.py[DEBUG]: Creating symbolic link from '/run/cloud-init/cloud-id' => '/run/cloud-init/cloud-id-nocloud'
2026-01-13 22:24:47,888 - atomic_helper.py[DEBUG]: Atomically writing to file /run/cloud-init/instance-data-sensitive.json (via temporary file /run/cloud-init/tmppnhk3iou) - w: [600] 6783 bytes/chars
2026-01-13 22:24:47,889 - atomic_helper.py[DEBUG]: Atomically writing to file /run/cloud-init/instance-data.json (via temporary file /run/cloud-init/tmp2z0948xc) - w: [644] 1521 bytes/chars
2026-01-13 22:24:47,889 - handlers.py[DEBUG]: finish: init-local/search-NoCloud: SUCCESS: found local data from DataSourceNoCloud
2026-01-13 22:24:47,890 - stages.py[INFO]: Loaded datasource DataSourceNoCloud - DataSourceNoCloud [seed=/dev/sr0][dsmode=net]
2026-01-13 22:24:47,890 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg (quiet=False)
2026-01-13 22:24:47,890 - util.py[DEBUG]: Read 2796 bytes from /etc/cloud/cloud.cfg
2026-01-13 22:24:47,890 - util.py[DEBUG]: Attempting to load yaml from string of length 2796 with allowed root types (<class 'dict'>,)
2026-01-13 22:24:47,903 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/99-ssh.cfg (quiet=False)
2026-01-13 22:24:47,903 - util.py[DEBUG]: Read 48 bytes from /etc/cloud/cloud.cfg.d/99-ssh.cfg
2026-01-13 22:24:47,903 - util.py[DEBUG]: Attempting to load yaml from string of length 48 with allowed root types (<class 'dict'>,)
2026-01-13 22:24:47,904 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/05_logging.cfg (quiet=False)
2026-01-13 22:24:47,904 - util.py[DEBUG]: Read 2070 bytes from /etc/cloud/cloud.cfg.d/05_logging.cfg
2026-01-13 22:24:47,904 - util.py[DEBUG]: Attempting to load yaml from string of length 2070 with allowed root types (<class 'dict'>,)
2026-01-13 22:24:47,907 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg (quiet=False)
2026-01-13 22:24:47,908 - util.py[DEBUG]: Read 309 bytes from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg
2026-01-13 22:24:47,908 - util.py[DEBUG]: Attempting to load yaml from string of length 309 with allowed root types (<class 'dict'>,)
2026-01-13 22:24:47,911 - util.py[DEBUG]: Reading from /run/cloud-init/cloud.cfg (quiet=False)
2026-01-13 22:24:47,912 - util.py[DEBUG]: Read 35 bytes from /run/cloud-init/cloud.cfg
2026-01-13 22:24:47,912 - util.py[DEBUG]: Attempting to load yaml from string of length 35 with allowed root types (<class 'dict'>,)
2026-01-13 22:24:47,913 - util.py[DEBUG]: Attempting to load yaml from string of length 0 with allowed root types (<class 'dict'>,)
2026-01-13 22:24:47,913 - util.py[DEBUG]: loaded blob returned None, returning default.
2026-01-13 22:24:47,914 - util.py[DEBUG]: Attempting to remove /var/lib/cloud/instance
2026-01-13 22:24:47,914 - util.py[DEBUG]: Creating symbolic link from '/var/lib/cloud/instance' => '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184'
2026-01-13 22:24:47,916 - util.py[DEBUG]: Reading from /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/datasource (quiet=False)
2026-01-13 22:24:47,917 - util.py[DEBUG]: Read 65 bytes from /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/datasource
2026-01-13 22:24:47,917 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/datasource - wb: [644] 65 bytes
2026-01-13 22:24:47,918 - util.py[DEBUG]: Writing to /var/lib/cloud/data/previous-datasource - wb: [644] 65 bytes
2026-01-13 22:24:47,918 - util.py[DEBUG]: Reading from /var/lib/cloud/data/instance-id (quiet=False)
2026-01-13 22:24:47,919 - util.py[DEBUG]: Read 41 bytes from /var/lib/cloud/data/instance-id
2026-01-13 22:24:47,919 - stages.py[DEBUG]: previous iid found to be 3a7b79c34864e435b2e39df1a836248be4942184
2026-01-13 22:24:47,919 - util.py[DEBUG]: Writing to /var/lib/cloud/data/instance-id - wb: [644] 41 bytes
2026-01-13 22:24:47,920 - util.py[DEBUG]: Writing to /run/cloud-init/.instance-id - wb: [644] 41 bytes
2026-01-13 22:24:47,920 - util.py[DEBUG]: Writing to /var/lib/cloud/data/previous-instance-id - wb: [644] 41 bytes
2026-01-13 22:24:47,921 - util.py[DEBUG]: Writing to /var/lib/cloud/instance/obj.pkl - wb: [400] 8298 bytes
2026-01-13 22:24:47,922 - main.py[DEBUG]: [local] init will now be targeting instance id: 3a7b79c34864e435b2e39df1a836248be4942184. new=False
2026-01-13 22:24:47,922 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg (quiet=False)
2026-01-13 22:24:47,922 - util.py[DEBUG]: Read 2796 bytes from /etc/cloud/cloud.cfg
2026-01-13 22:24:47,922 - util.py[DEBUG]: Attempting to load yaml from string of length 2796 with allowed root types (<class 'dict'>,)
2026-01-13 22:24:47,935 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/99-ssh.cfg (quiet=False)
2026-01-13 22:24:47,935 - util.py[DEBUG]: Read 48 bytes from /etc/cloud/cloud.cfg.d/99-ssh.cfg
2026-01-13 22:24:47,935 - util.py[DEBUG]: Attempting to load yaml from string of length 48 with allowed root types (<class 'dict'>,)
2026-01-13 22:24:47,936 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/05_logging.cfg (quiet=False)
2026-01-13 22:24:47,936 - util.py[DEBUG]: Read 2070 bytes from /etc/cloud/cloud.cfg.d/05_logging.cfg
2026-01-13 22:24:47,936 - util.py[DEBUG]: Attempting to load yaml from string of length 2070 with allowed root types (<class 'dict'>,)
2026-01-13 22:24:47,940 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg (quiet=False)
2026-01-13 22:24:47,940 - util.py[DEBUG]: Read 309 bytes from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg
2026-01-13 22:24:47,940 - util.py[DEBUG]: Attempting to load yaml from string of length 309 with allowed root types (<class 'dict'>,)
2026-01-13 22:24:47,943 - util.py[DEBUG]: Reading from /run/cloud-init/cloud.cfg (quiet=False)
2026-01-13 22:24:47,943 - util.py[DEBUG]: Read 35 bytes from /run/cloud-init/cloud.cfg
2026-01-13 22:24:47,943 - util.py[DEBUG]: Attempting to load yaml from string of length 35 with allowed root types (<class 'dict'>,)
2026-01-13 22:24:47,943 - util.py[DEBUG]: Attempting to load yaml from string of length 0 with allowed root types (<class 'dict'>,)
2026-01-13 22:24:47,944 - util.py[DEBUG]: loaded blob returned None, returning default.
2026-01-13 22:24:47,944 - util.py[DEBUG]: Reading from /var/lib/cloud/instance/cloud-config.txt (quiet=False)
2026-01-13 22:24:47,944 - util.py[DEBUG]: Read 1742 bytes from /var/lib/cloud/instance/cloud-config.txt
2026-01-13 22:24:47,944 - util.py[DEBUG]: Attempting to load yaml from string of length 1742 with allowed root types (<class 'dict'>,)
2026-01-13 22:24:47,948 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2026-01-13 22:24:47,949 - util.py[DEBUG]: Reading from /var/lib/cloud/data/set-hostname (quiet=False)
2026-01-13 22:24:47,949 - util.py[DEBUG]: Read 71 bytes from /var/lib/cloud/data/set-hostname
2026-01-13 22:24:47,950 - cc_set_hostname.py[DEBUG]: No hostname changes. Skipping set-hostname
2026-01-13 22:24:47,950 - util.py[DEBUG]: Reading from /sys/class/net/eth0/address (quiet=False)
2026-01-13 22:24:47,951 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/eth0/address
2026-01-13 22:24:47,951 - util.py[DEBUG]: Reading from /sys/class/net/lo/address (quiet=False)
2026-01-13 22:24:47,951 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/lo/address
2026-01-13 22:24:47,952 - stages.py[DEBUG]: Allowed events: {<EventScope.NETWORK: 'network'>: {<EventType.BOOT_NEW_INSTANCE: 'boot-new-instance'>}}
2026-01-13 22:24:47,952 - stages.py[DEBUG]: Event Denied: scopes=['network'] EventType=boot
2026-01-13 22:24:47,952 - stages.py[DEBUG]: Allowed events: {<EventScope.NETWORK: 'network'>: {<EventType.BOOT_NEW_INSTANCE: 'boot-new-instance'>}}
2026-01-13 22:24:47,952 - stages.py[DEBUG]: Event Denied: scopes=['network'] EventType=boot-legacy
2026-01-13 22:24:47,952 - stages.py[DEBUG]: No network config applied. Neither a new instance nor datasource network update allowed
2026-01-13 22:24:47,952 - stages.py[DEBUG]: applying net config names for {'version': 1, 'config': [{'type': 'physical', 'name': 'eth0', 'mac_address': '00:50:56:5e:95:7b', 'subnets': [{'type': 'static', 'address': '109.199.123.73', 'netmask': '255.255.240.0', 'gateway': '109.199.112.1'}, {'type': 'static6', 'address': '2a02:c207:2293:6396:0000:0000:0000:0001/64', 'gateway': 'fe80::1'}]}, {'type': 'nameserver', 'address': ['213.136.95.10', '213.136.95.11', '2a02:c207::1:53']}]}
2026-01-13 22:24:47,953 - util.py[DEBUG]: Reading from /sys/class/net/eth0/device/device (quiet=False)
2026-01-13 22:24:47,953 - util.py[DEBUG]: Read 7 bytes from /sys/class/net/eth0/device/device
2026-01-13 22:24:47,953 - util.py[DEBUG]: Reading from /sys/class/net/eth0/addr_assign_type (quiet=False)
2026-01-13 22:24:47,953 - util.py[DEBUG]: Read 2 bytes from /sys/class/net/eth0/addr_assign_type
2026-01-13 22:24:47,953 - util.py[DEBUG]: Reading from /sys/class/net/eth0/uevent (quiet=False)
2026-01-13 22:24:47,953 - util.py[DEBUG]: Read 25 bytes from /sys/class/net/eth0/uevent
2026-01-13 22:24:47,953 - util.py[DEBUG]: Reading from /sys/class/net/eth0/address (quiet=False)
2026-01-13 22:24:47,953 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/eth0/address
2026-01-13 22:24:47,954 - __init__.py[DEBUG]: ovs-vsctl not in PATH; not detecting Open vSwitch interfaces
2026-01-13 22:24:47,954 - util.py[DEBUG]: Reading from /sys/class/net/eth0/device/device (quiet=False)
2026-01-13 22:24:47,954 - util.py[DEBUG]: Read 7 bytes from /sys/class/net/eth0/device/device
2026-01-13 22:24:47,954 - util.py[DEBUG]: Reading from /sys/class/net/lo/addr_assign_type (quiet=False)
2026-01-13 22:24:47,954 - util.py[DEBUG]: Read 2 bytes from /sys/class/net/lo/addr_assign_type
2026-01-13 22:24:47,954 - util.py[DEBUG]: Reading from /sys/class/net/lo/uevent (quiet=False)
2026-01-13 22:24:47,954 - util.py[DEBUG]: Read 23 bytes from /sys/class/net/lo/uevent
2026-01-13 22:24:47,954 - util.py[DEBUG]: Reading from /sys/class/net/lo/address (quiet=False)
2026-01-13 22:24:47,954 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/lo/address
2026-01-13 22:24:47,954 - util.py[DEBUG]: Reading from /sys/class/net/lo/device/device (quiet=False)
2026-01-13 22:24:47,955 - util.py[DEBUG]: Reading from /sys/class/net/eth0/operstate (quiet=False)
2026-01-13 22:24:47,955 - util.py[DEBUG]: Read 5 bytes from /sys/class/net/eth0/operstate
2026-01-13 22:24:47,955 - util.py[DEBUG]: Reading from /sys/class/net/lo/operstate (quiet=False)
2026-01-13 22:24:47,955 - util.py[DEBUG]: Read 8 bytes from /sys/class/net/lo/operstate
2026-01-13 22:24:47,955 - subp.py[DEBUG]: Running command ['ip', '-6', 'addr', 'show', 'permanent', 'scope', 'global'] with allowed return codes [0] (shell=False, capture=True)
2026-01-13 22:24:47,979 - subp.py[DEBUG]: Running command ['ip', '-4', 'addr', 'show'] with allowed return codes [0] (shell=False, capture=True)
2026-01-13 22:24:47,985 - __init__.py[DEBUG]: Detected interfaces {'eth0': {'downable': True, 'device_id': '0x0001', 'driver': 'virtio_net', 'mac': '00:50:56:5e:95:7b', 'name': 'eth0', 'up': False}, 'lo': {'downable': False, 'device_id': None, 'driver': None, 'mac': '00:00:00:00:00:00', 'name': 'lo', 'up': True}}
2026-01-13 22:24:47,985 - __init__.py[DEBUG]: no work necessary for renaming of [['00:50:56:5e:95:7b', 'eth0', 'virtio_net', '0x0001']]
2026-01-13 22:24:47,985 - main.py[DEBUG]: [local] Exiting. datasource DataSourceNoCloud [seed=/dev/sr0][dsmode=net] not in local mode.
2026-01-13 22:24:47,986 - atomic_helper.py[DEBUG]: Atomically writing to file /var/lib/cloud/data/status.json (via temporary file /var/lib/cloud/data/tmpadvbkoqq) - w: [644] 517 bytes/chars
2026-01-13 22:24:47,986 - util.py[DEBUG]: Reading from /proc/uptime (quiet=False)
2026-01-13 22:24:47,987 - util.py[DEBUG]: Read 11 bytes from /proc/uptime
2026-01-13 22:24:47,987 - util.py[DEBUG]: cloud-init mode 'init' took 0.406 seconds (0.41)
2026-01-13 22:24:47,987 - handlers.py[DEBUG]: finish: init-local: SUCCESS: searching for local datasources
2026-01-13 22:25:02,113 - util.py[DEBUG]: Cloud-init v. 22.4.2 running 'modules:config' at Tue, 13 Jan 2026 22:25:02 +0000. Up 18.90 seconds.
2026-01-13 22:25:02,116 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,116 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,121 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,121 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,124 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,124 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,127 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,127 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,129 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,129 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,132 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,132 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,135 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,135 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,139 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,139 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,143 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,143 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,145 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,146 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,148 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,149 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,151 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,151 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,153 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,153 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,155 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2026-01-13 22:25:02,157 - modules.py[INFO]: Skipping modules 'snap,keyboard,apt-pipelining,ntp,disable-ec2-metadata,runcmd' because no applicable config is provided.
2026-01-13 22:25:02,157 - modules.py[DEBUG]: Running module ssh-import-id (<module 'cloudinit.config.cc_ssh_import_id' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_ssh_import_id.py'>) with frequency once-per-instance
2026-01-13 22:25:02,158 - handlers.py[DEBUG]: start: modules-config/config-ssh-import-id: running config-ssh-import-id with frequency once-per-instance
2026-01-13 22:25:02,158 - helpers.py[DEBUG]: config-ssh-import-id already ran (freq=once-per-instance)
2026-01-13 22:25:02,158 - handlers.py[DEBUG]: finish: modules-config/config-ssh-import-id: SUCCESS: config-ssh-import-id previously ran
2026-01-13 22:25:02,158 - modules.py[DEBUG]: Running module locale (<module 'cloudinit.config.cc_locale' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_locale.py'>) with frequency once-per-instance
2026-01-13 22:25:02,159 - handlers.py[DEBUG]: start: modules-config/config-locale: running config-locale with frequency once-per-instance
2026-01-13 22:25:02,159 - helpers.py[DEBUG]: config-locale already ran (freq=once-per-instance)
2026-01-13 22:25:02,159 - handlers.py[DEBUG]: finish: modules-config/config-locale: SUCCESS: config-locale previously ran
2026-01-13 22:25:02,159 - modules.py[DEBUG]: Running module set-passwords (<module 'cloudinit.config.cc_set_passwords' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_set_passwords.py'>) with frequency once-per-instance
2026-01-13 22:25:02,159 - handlers.py[DEBUG]: start: modules-config/config-set-passwords: running config-set-passwords with frequency once-per-instance
2026-01-13 22:25:02,159 - helpers.py[DEBUG]: config-set-passwords already ran (freq=once-per-instance)
2026-01-13 22:25:02,159 - handlers.py[DEBUG]: finish: modules-config/config-set-passwords: SUCCESS: config-set-passwords previously ran
2026-01-13 22:25:02,159 - modules.py[DEBUG]: Running module grub-dpkg (<module 'cloudinit.config.cc_grub_dpkg' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_grub_dpkg.py'>) with frequency once-per-instance
2026-01-13 22:25:02,159 - handlers.py[DEBUG]: start: modules-config/config-grub-dpkg: running config-grub-dpkg with frequency once-per-instance
2026-01-13 22:25:02,159 - helpers.py[DEBUG]: config-grub-dpkg already ran (freq=once-per-instance)
2026-01-13 22:25:02,160 - handlers.py[DEBUG]: finish: modules-config/config-grub-dpkg: SUCCESS: config-grub-dpkg previously ran
2026-01-13 22:25:02,160 - modules.py[DEBUG]: Running module apt-configure (<module 'cloudinit.config.cc_apt_configure' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_apt_configure.py'>) with frequency once-per-instance
2026-01-13 22:25:02,160 - handlers.py[DEBUG]: start: modules-config/config-apt-configure: running config-apt-configure with frequency once-per-instance
2026-01-13 22:25:02,160 - helpers.py[DEBUG]: config-apt-configure already ran (freq=once-per-instance)
2026-01-13 22:25:02,160 - handlers.py[DEBUG]: finish: modules-config/config-apt-configure: SUCCESS: config-apt-configure previously ran
2026-01-13 22:25:02,160 - modules.py[DEBUG]: Running module timezone (<module 'cloudinit.config.cc_timezone' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_timezone.py'>) with frequency once-per-instance
2026-01-13 22:25:02,160 - handlers.py[DEBUG]: start: modules-config/config-timezone: running config-timezone with frequency once-per-instance
2026-01-13 22:25:02,160 - helpers.py[DEBUG]: config-timezone already ran (freq=once-per-instance)
2026-01-13 22:25:02,160 - handlers.py[DEBUG]: finish: modules-config/config-timezone: SUCCESS: config-timezone previously ran
2026-01-13 22:25:02,160 - modules.py[DEBUG]: Running module byobu (<module 'cloudinit.config.cc_byobu' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_byobu.py'>) with frequency once-per-instance
2026-01-13 22:25:02,161 - handlers.py[DEBUG]: start: modules-config/config-byobu: running config-byobu with frequency once-per-instance
2026-01-13 22:25:02,161 - helpers.py[DEBUG]: config-byobu already ran (freq=once-per-instance)
2026-01-13 22:25:02,161 - handlers.py[DEBUG]: finish: modules-config/config-byobu: SUCCESS: config-byobu previously ran
2026-01-13 22:25:02,161 - main.py[DEBUG]: Ran 7 modules with 0 failures
2026-01-13 22:25:02,161 - atomic_helper.py[DEBUG]: Atomically writing to file /var/lib/cloud/data/status.json (via temporary file /var/lib/cloud/data/tmpjbm4euy6) - w: [644] 545 bytes/chars
2026-01-13 22:25:02,161 - util.py[DEBUG]: Reading from /proc/uptime (quiet=False)
2026-01-13 22:25:02,162 - util.py[DEBUG]: Read 12 bytes from /proc/uptime
2026-01-13 22:25:02,162 - util.py[DEBUG]: cloud-init mode 'modules' took 0.111 seconds (0.11)
2026-01-13 22:25:02,162 - handlers.py[DEBUG]: finish: modules-config: SUCCESS: running modules for config
2026-01-13 22:25:02,550 - util.py[DEBUG]: Cloud-init v. 22.4.2 running 'modules:final' at Tue, 13 Jan 2026 22:25:02 +0000. Up 19.34 seconds.
2026-01-13 22:25:02,551 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,552 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,554 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,554 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,556 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,556 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,558 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,558 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,561 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,561 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,564 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,564 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,566 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,566 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,568 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,568 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,569 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,569 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,572 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,572 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,573 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,573 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,575 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,575 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,576 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,576 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,577 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,577 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,578 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,579 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,580 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,580 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,581 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,581 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,583 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,583 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,584 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,584 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,586 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,586 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,587 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,587 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,589 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2026-01-13 22:25:02,591 - modules.py[INFO]: Skipping modules 'fan,landscape,lxd,puppet,chef,mcollective,salt-minion,phone-home,power-state-change' because no applicable config is provided.
2026-01-13 22:25:02,591 - modules.py[DEBUG]: Running module package-update-upgrade-install (<module 'cloudinit.config.cc_package_update_upgrade_install' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_package_update_upgrade_install.py'>) with frequency once-per-instance
2026-01-13 22:25:02,591 - handlers.py[DEBUG]: start: modules-final/config-package-update-upgrade-install: running config-package-update-upgrade-install with frequency once-per-instance
2026-01-13 22:25:02,591 - helpers.py[DEBUG]: config-package-update-upgrade-install already ran (freq=once-per-instance)
2026-01-13 22:25:02,591 - handlers.py[DEBUG]: finish: modules-final/config-package-update-upgrade-install: SUCCESS: config-package-update-upgrade-install previously ran
2026-01-13 22:25:02,591 - modules.py[DEBUG]: Running module write-files-deferred (<module 'cloudinit.config.cc_write_files_deferred' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_write_files_deferred.py'>) with frequency once-per-instance
2026-01-13 22:25:02,591 - handlers.py[DEBUG]: start: modules-final/config-write-files-deferred: running config-write-files-deferred with frequency once-per-instance
2026-01-13 22:25:02,591 - helpers.py[DEBUG]: config-write-files-deferred already ran (freq=once-per-instance)
2026-01-13 22:25:02,591 - handlers.py[DEBUG]: finish: modules-final/config-write-files-deferred: SUCCESS: config-write-files-deferred previously ran
2026-01-13 22:25:02,591 - modules.py[DEBUG]: Running module reset_rmc (<module 'cloudinit.config.cc_reset_rmc' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_reset_rmc.py'>) with frequency once-per-instance
2026-01-13 22:25:02,592 - handlers.py[DEBUG]: start: modules-final/config-reset_rmc: running config-reset_rmc with frequency once-per-instance
2026-01-13 22:25:02,592 - helpers.py[DEBUG]: config-reset_rmc already ran (freq=once-per-instance)
2026-01-13 22:25:02,592 - handlers.py[DEBUG]: finish: modules-final/config-reset_rmc: SUCCESS: config-reset_rmc previously ran
2026-01-13 22:25:02,592 - modules.py[DEBUG]: Running module refresh_rmc_and_interface (<module 'cloudinit.config.cc_refresh_rmc_and_interface' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_refresh_rmc_and_interface.py'>) with frequency always
2026-01-13 22:25:02,592 - handlers.py[DEBUG]: start: modules-final/config-refresh_rmc_and_interface: running config-refresh_rmc_and_interface with frequency always
2026-01-13 22:25:02,592 - helpers.py[DEBUG]: Running config-refresh_rmc_and_interface using lock (<cloudinit.helpers.DummyLock object at 0x7fbc05c9f3d0>)
2026-01-13 22:25:02,592 - cc_refresh_rmc_and_interface.py[DEBUG]: No 'rmcctrl' in path, disabled
2026-01-13 22:25:02,592 - handlers.py[DEBUG]: finish: modules-final/config-refresh_rmc_and_interface: SUCCESS: config-refresh_rmc_and_interface ran successfully
2026-01-13 22:25:02,592 - modules.py[DEBUG]: Running module rightscale_userdata (<module 'cloudinit.config.cc_rightscale_userdata' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_rightscale_userdata.py'>) with frequency once-per-instance
2026-01-13 22:25:02,592 - handlers.py[DEBUG]: start: modules-final/config-rightscale_userdata: running config-rightscale_userdata with frequency once-per-instance
2026-01-13 22:25:02,592 - helpers.py[DEBUG]: config-rightscale_userdata already ran (freq=once-per-instance)
2026-01-13 22:25:02,592 - handlers.py[DEBUG]: finish: modules-final/config-rightscale_userdata: SUCCESS: config-rightscale_userdata previously ran
2026-01-13 22:25:02,592 - modules.py[DEBUG]: Running module scripts-vendor (<module 'cloudinit.config.cc_scripts_vendor' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_vendor.py'>) with frequency once-per-instance
2026-01-13 22:25:02,593 - handlers.py[DEBUG]: start: modules-final/config-scripts-vendor: running config-scripts-vendor with frequency once-per-instance
2026-01-13 22:25:02,593 - helpers.py[DEBUG]: config-scripts-vendor already ran (freq=once-per-instance)
2026-01-13 22:25:02,593 - handlers.py[DEBUG]: finish: modules-final/config-scripts-vendor: SUCCESS: config-scripts-vendor previously ran
2026-01-13 22:25:02,593 - modules.py[DEBUG]: Running module scripts-per-once (<module 'cloudinit.config.cc_scripts_per_once' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_per_once.py'>) with frequency once
2026-01-13 22:25:02,593 - handlers.py[DEBUG]: start: modules-final/config-scripts-per-once: running config-scripts-per-once with frequency once
2026-01-13 22:25:02,593 - helpers.py[DEBUG]: config-scripts-per-once already ran (freq=once)
2026-01-13 22:25:02,593 - handlers.py[DEBUG]: finish: modules-final/config-scripts-per-once: SUCCESS: config-scripts-per-once previously ran
2026-01-13 22:25:02,593 - modules.py[DEBUG]: Running module scripts-per-boot (<module 'cloudinit.config.cc_scripts_per_boot' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_per_boot.py'>) with frequency always
2026-01-13 22:25:02,593 - handlers.py[DEBUG]: start: modules-final/config-scripts-per-boot: running config-scripts-per-boot with frequency always
2026-01-13 22:25:02,593 - helpers.py[DEBUG]: Running config-scripts-per-boot using lock (<cloudinit.helpers.DummyLock object at 0x7fbc05c9fed0>)
2026-01-13 22:25:02,594 - handlers.py[DEBUG]: finish: modules-final/config-scripts-per-boot: SUCCESS: config-scripts-per-boot ran successfully
2026-01-13 22:25:02,594 - modules.py[DEBUG]: Running module scripts-per-instance (<module 'cloudinit.config.cc_scripts_per_instance' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_per_instance.py'>) with frequency once-per-instance
2026-01-13 22:25:02,594 - handlers.py[DEBUG]: start: modules-final/config-scripts-per-instance: running config-scripts-per-instance with frequency once-per-instance
2026-01-13 22:25:02,594 - helpers.py[DEBUG]: config-scripts-per-instance already ran (freq=once-per-instance)
2026-01-13 22:25:02,594 - handlers.py[DEBUG]: finish: modules-final/config-scripts-per-instance: SUCCESS: config-scripts-per-instance previously ran
2026-01-13 22:25:02,594 - modules.py[DEBUG]: Running module scripts-user (<module 'cloudinit.config.cc_scripts_user' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_user.py'>) with frequency once-per-instance
2026-01-13 22:25:02,594 - handlers.py[DEBUG]: start: modules-final/config-scripts-user: running config-scripts-user with frequency once-per-instance
2026-01-13 22:25:02,594 - helpers.py[DEBUG]: config-scripts-user already ran (freq=once-per-instance)
2026-01-13 22:25:02,594 - handlers.py[DEBUG]: finish: modules-final/config-scripts-user: SUCCESS: config-scripts-user previously ran
2026-01-13 22:25:02,594 - modules.py[DEBUG]: Running module ssh-authkey-fingerprints (<module 'cloudinit.config.cc_ssh_authkey_fingerprints' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_ssh_authkey_fingerprints.py'>) with frequency once-per-instance
2026-01-13 22:25:02,594 - handlers.py[DEBUG]: start: modules-final/config-ssh-authkey-fingerprints: running config-ssh-authkey-fingerprints with frequency once-per-instance
2026-01-13 22:25:02,594 - helpers.py[DEBUG]: config-ssh-authkey-fingerprints already ran (freq=once-per-instance)
2026-01-13 22:25:02,594 - handlers.py[DEBUG]: finish: modules-final/config-ssh-authkey-fingerprints: SUCCESS: config-ssh-authkey-fingerprints previously ran
2026-01-13 22:25:02,594 - modules.py[DEBUG]: Running module keys-to-console (<module 'cloudinit.config.cc_keys_to_console' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_keys_to_console.py'>) with frequency once-per-instance
2026-01-13 22:25:02,594 - handlers.py[DEBUG]: start: modules-final/config-keys-to-console: running config-keys-to-console with frequency once-per-instance
2026-01-13 22:25:02,595 - helpers.py[DEBUG]: config-keys-to-console already ran (freq=once-per-instance)
2026-01-13 22:25:02,595 - handlers.py[DEBUG]: finish: modules-final/config-keys-to-console: SUCCESS: config-keys-to-console previously ran
2026-01-13 22:25:02,595 - modules.py[DEBUG]: Running module install-hotplug (<module 'cloudinit.config.cc_install_hotplug' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_install_hotplug.py'>) with frequency once-per-instance
2026-01-13 22:25:02,595 - handlers.py[DEBUG]: start: modules-final/config-install-hotplug: running config-install-hotplug with frequency once-per-instance
2026-01-13 22:25:02,595 - helpers.py[DEBUG]: config-install-hotplug already ran (freq=once-per-instance)
2026-01-13 22:25:02,595 - handlers.py[DEBUG]: finish: modules-final/config-install-hotplug: SUCCESS: config-install-hotplug previously ran
2026-01-13 22:25:02,595 - modules.py[DEBUG]: Running module final-message (<module 'cloudinit.config.cc_final_message' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_final_message.py'>) with frequency always
2026-01-13 22:25:02,595 - handlers.py[DEBUG]: start: modules-final/config-final-message: running config-final-message with frequency always
2026-01-13 22:25:02,595 - helpers.py[DEBUG]: Running config-final-message using lock (<cloudinit.helpers.DummyLock object at 0x7fbc05df8bd0>)
2026-01-13 22:25:02,595 - util.py[DEBUG]: Reading from /proc/uptime (quiet=False)
2026-01-13 22:25:02,595 - util.py[DEBUG]: Read 12 bytes from /proc/uptime
2026-01-13 22:25:02,599 - util.py[DEBUG]: Cloud-init v. 22.4.2 finished at Tue, 13 Jan 2026 22:25:02 +0000. Datasource DataSourceNoCloud [seed=/dev/sr0][dsmode=net].  Up 19.41 seconds
2026-01-13 22:25:02,600 - util.py[DEBUG]: Writing to /var/lib/cloud/instance/boot-finished - wb: [644] 52 bytes
2026-01-13 22:25:02,600 - handlers.py[DEBUG]: finish: modules-final/config-final-message: SUCCESS: config-final-message ran successfully
2026-01-13 22:25:02,600 - main.py[DEBUG]: Ran 14 modules with 0 failures
2026-01-13 22:25:02,600 - atomic_helper.py[DEBUG]: Atomically writing to file /var/lib/cloud/data/status.json (via temporary file /var/lib/cloud/data/tmp0r7ta0cr) - w: [644] 573 bytes/chars
2026-01-13 22:25:02,601 - atomic_helper.py[DEBUG]: Atomically writing to file /var/lib/cloud/data/result.json (via temporary file /var/lib/cloud/data/tmptwbetqc3) - w: [644] 96 bytes/chars
2026-01-13 22:25:02,601 - util.py[DEBUG]: Creating symbolic link from '/run/cloud-init/result.json' => '../../var/lib/cloud/data/result.json'
2026-01-13 22:25:02,601 - util.py[DEBUG]: Reading from /proc/uptime (quiet=False)
2026-01-13 22:25:02,601 - util.py[DEBUG]: Read 12 bytes from /proc/uptime
2026-01-13 22:25:02,601 - util.py[DEBUG]: cloud-init mode 'modules' took 0.111 seconds (0.11)
2026-01-13 22:25:02,601 - handlers.py[DEBUG]: finish: modules-final: SUCCESS: running modules for final
2026-10-19 23:59:53,653 - log_util.py[DEBUG]: Cloud-init v. 25.1.4 running 'init' at Mon, 19 Oct 2026 23:59:53 +0000. Up 7.75 seconds.
2026-10-19 23:59:53,657 - main.py[INFO]: PID [871] started cloud-init 'init'.
2026-10-19 23:59:53,657 - main.py[DEBUG]: No kernel command line url found.
2026-10-19 23:59:53,657 - main.py[DEBUG]: Closing stdin
2026-10-19 23:59:53,660 - util.py[DEBUG]: Writing to /var/log/cloud-init.log - ab: [640] 0 bytes
2026-10-19 23:59:53,661 - util.py[DEBUG]: Changing the ownership of /var/log/cloud-init.log to 0:4
2026-10-19 23:59:53,661 - util.py[DEBUG]: Reading from /var/lib/cloud/data/python-version (quiet=False)
2026-10-19 23:59:53,663 - util.py[DEBUG]: Reading 4 bytes from /var/lib/cloud/data/python-version
2026-10-19 23:59:53,663 - main.py[DEBUG]: Python version change detected. Purging cache
2026-10-19 23:59:53,663 - util.py[DEBUG]: Attempting to remove /var/lib/cloud/instance/boot-finished
2026-10-19 23:59:53,663 - util.py[DEBUG]: Attempting to remove /var/lib/cloud/instance
2026-10-19 23:59:53,663 - util.py[DEBUG]: Writing to /var/lib/cloud/data/python-version - wb: [644] 4 bytes
2026-10-19 23:59:53,664 - main.py[DEBUG]: Will wait for network connectivity before continuing
2026-10-19 23:59:53,684 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2026-10-19 23:59:53,685 - subp.py[DEBUG]: Running command ['ip', '--json', 'addr'] with allowed return codes [0] (shell=False, capture=True)
2026-10-19 23:59:53,698 - performance.py[DEBUG]: Running ['ip', '--json', 'addr'] took 0.012 seconds
2026-10-19 23:59:53,699 - subp.py[DEBUG]: Running command ['ip', '-o', 'route', 'list'] with allowed return codes [0] (shell=False, capture=True)
2026-10-19 23:59:53,706 - subp.py[DEBUG]: Running command ['ip', '--oneline', '-6', 'route', 'list', 'table', 'all'] with allowed return codes [0, 1] (shell=False, capture=True)
2026-10-19 23:59:53,719 - handlers.py[DEBUG]: start: init-network/check-cache: attempting to read from cache [trust]
2026-10-19 23:59:53,719 - util.py[DEBUG]: Reading from /var/lib/cloud/instance/obj.pkl (quiet=False)
2026-10-19 23:59:53,720 - stages.py[DEBUG]: no cache found
2026-10-19 23:59:53,720 - handlers.py[DEBUG]: finish: init-network/check-cache: SUCCESS: no cache found
2026-10-19 23:59:53,721 - sources[DEBUG]: Looking for data source in: ['NoCloud', 'ConfigDrive', 'LXD', 'OpenNebula', 'DigitalOcean', 'Azure', 'AltCloud', 'VMware', 'OVF', 'MAAS', 'GCE', 'OpenStack', 'AliYun', 'Vultr', 'Ec2', 'CloudSigma', 'CloudStack', 'SmartOS', 'Bigstep', 'Scaleway', 'Hetzner', 'IBMCloud', 'Oracle', 'Exoscale', 'RbxCloud', 'UpCloud', 'NWCS', 'Akamai', 'WSL', 'CloudCIX', 'None'], via packages ['', 'cloudinit.sources'] that matches dependencies ['FILESYSTEM', 'NETWORK']
2026-10-19 23:59:53,937 - sources[DEBUG]: Searching for network data source in: ['DataSourceNoCloudNet', 'DataSourceAltCloud', 'DataSourceVMware', 'DataSourceOVFNet', 'DataSourceMAAS', 'DataSourceGCE', 'DataSourceOpenStack', 'DataSourceAliYun', 'DataSourceEc2', 'DataSourceCloudStack', 'DataSourceBigstep', 'DataSourceOracleNet', 'DataSourceExoscale', 'DataSourceUpCloud', 'DataSourceAkamai', 'DataSourceCloudCIX', 'DataSourceNone']
2026-10-19 23:59:53,938 - handlers.py[DEBUG]: start: init-network/search-NoCloudNet: searching for network data from DataSourceNoCloudNet
2026-10-19 23:59:53,938 - sources[DEBUG]: Seeing if we can get any data from <class 'cloudinit.sources.DataSourceNoCloud.DataSourceNoCloudNet'>
2026-10-19 23:59:53,938 - sources[DEBUG]: Update datasource metadata and network config due to events: boot-new-instance
2026-10-19 23:59:53,939 - dmi.py[DEBUG]: querying dmi data /sys/class/dmi/id/product_serial
2026-10-19 23:59:53,939 - sources[DEBUG]: Did not detect DataSourceNoCloudNet 
2026-10-19 23:59:53,939 - performance.py[DEBUG]: Getting metadata took 0.001 seconds
2026-10-19 23:59:53,939 - sources[DEBUG]: Datasource DataSourceNoCloudNet  not updated for events: boot-new-instance
2026-10-19 23:59:53,939 - handlers.py[DEBUG]: finish: init-network/search-NoCloudNet: SUCCESS: no network data found from DataSourceNoCloudNet
2026-10-19 23:59:53,939 - handlers.py[DEBUG]: start: init-network/search-AltCloud: searching for network data from DataSourceAltCloud
2026-10-19 23:59:53,939 - sources[DEBUG]: Seeing if we can get any data from <class 'cloudinit.sources.DataSourceAltCloud.DataSourceAltCloud'>
2026-10-19 23:59:53,940 - sources[DEBUG]: Update datasource metadata and network config due to events: boot-new-instance
2026-10-19 23:59:53,940 - sources[DEBUG]: Detected DataSourceAltCloud [seed=None]
2026-10-19 23:59:53,940 - DataSourceAltCloud.py[DEBUG]: Invoked get_data()
2026-10-19 23:59:53,940 - dmi.py[DEBUG]: querying dmi data /sys/class/dmi/id/product_name
2026-10-19 23:59:53,940 - DataSourceAltCloud.py[DEBUG]: cloud_type: UNKNOWN
2026-10-19 23:59:53,940 - performance.py[DEBUG]: Getting metadata took 0.001 seconds
2026-10-19 23:59:53,941 - sources[DEBUG]: Datasource DataSourceAltCloud [seed=None] not updated for events: boot-new-instance
2026-10-19 23:59:53,941 - handlers.py[DEBUG]: finish: init-network/search-AltCloud: SUCCESS: no network data found from DataSourceAltCloud
2026-10-19 23:59:53,941 - handlers.py[DEBUG]: start: init-network/search-VMware: searching for network data from DataSourceVMware
2026-10-19 23:59:53,941 - sources[DEBUG]: Seeing if we can get any data from <class 'cloudinit.sources.DataSourceVMware.DataSourceVMware'>
2026-10-19 23:59:53,941 - sources[DEBUG]: Update datasource metadata and network config due to events: boot-new-instance
2026-10-19 23:59:53,942 - sources[DEBUG]: Detected DataSourceVMware [seed=None]
2026-10-19 23:59:53,942 - dmi.py[DEBUG]: querying dmi data /sys/class/dmi/id/product_name
2026-10-19 23:59:53,942 - DataSourceVMware.py[DEBUG]: Not a VMware platform
2026-10-19 23:59:53,942 - dmi.py[DEBUG]: querying dmi data /sys/class/dmi/id/product_name
2026-10-19 23:59:53,942 - DataSourceVMware.py[DEBUG]: Not a VMware platform
2026-10-19 23:59:53,943 - DataSourceVMware.py[DEBUG]: failed to find a valid data access method
2026-10-19 23:59:53,943 - performance.py[DEBUG]: Getting metadata took 0.001 seconds
2026-10-19 23:59:53,943 - sources[DEBUG]: Datasource DataSourceVMware [seed=None] not updated for events: boot-new-instance
2026-10-19 23:59:53,943 - handlers.py[DEBUG]: finish: init-network/search-VMware: SUCCESS: no network data found from DataSourceVMware
2026-10-19 23:59:53,944 - handlers.py[DEBUG]: start: init-network/search-OVFNet: searching for network data from DataSourceOVFNet
2026-10-19 23:59:53,944 - sources[DEBUG]: Seeing if we can get any data from <class 'cloudinit.sources.DataSourceOVF.DataSourceOVFNet'>
2026-10-19 23:59:53,944 - sources[DEBUG]: Update datasource metadata and network config due to events: boot-new-instance
2026-10-19 23:59:53,944 - sources[DEBUG]: Detected DataSourceOVFNet [seed=None]
2026-10-19 23:59:53,946 - DataSourceOVF.py[DEBUG]: no rpctool discovered
2026-10-19 23:59:53,946 - util.py[DEBUG]: Reading from /proc/mounts (quiet=False)
2026-10-19 23:59:53,946 - util.py[DEBUG]: Reading 2158 bytes from /proc/mounts
2026-10-19 23:59:53,946 - util.py[DEBUG]: Fetched {'sysfs': {'fstype': 'sysfs', 'mountpoint': '/sys', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'proc': {'fstype': 'proc', 'mountpoint': '/proc', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'udev': {'fstype': 'devtmpfs', 'mountpoint': '/dev', 'opts': 'rw,nosuid,relatime,size=9198360k,nr_inodes=2299590,mode=755,inode64'}, 'devpts': {'fstype': 'devpts', 'mountpoint': '/dev/pts', 'opts': 'rw,nosuid,noexec,relatime,gid=5,mode=600,ptmxmode=000'}, 'tmpfs': {'fstype': 'tmpfs', 'mountpoint': '/run/credentials/systemd-networkd.service', 'opts': 'ro,nosuid,nodev,noexec,relatime,nosymfollow,size=1024k,nr_inodes=1024,mode=700,inode64,noswap'}, '/dev/sda1': {'fstype': 'ext4', 'mountpoint': '/', 'opts': 'rw,relatime,discard,errors=remount-ro'}, 'securityfs': {'fstype': 'securityfs', 'mountpoint': '/sys/kernel/security', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'cgroup2': {'fstype': 'cgroup2', 'mountpoint': '/sys/fs/cgroup', 'opts': 'rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot'}, 'pstore': {'fstype': 'pstore', 'mountpoint': '/sys/fs/pstore', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'bpf': {'fstype': 'bpf', 'mountpoint': '/sys/fs/bpf', 'opts': 'rw,nosuid,nodev,noexec,relatime,mode=700'}, 'systemd-1': {'fstype': 'autofs', 'mountpoint': '/proc/sys/fs/binfmt_misc', 'opts': 'rw,relatime,fd=41,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=4178'}, 'mqueue': {'fstype': 'mqueue', 'mountpoint': '/dev/mqueue', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'hugetlbfs': {'fstype': 'hugetlbfs', 'mountpoint': '/dev/hugepages', 'opts': 'rw,nosuid,nodev,relatime,pagesize=2M'}, 'debugfs': {'fstype': 'debugfs', 'mountpoint': '/sys/kernel/debug', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'tracefs': {'fstype': 'tracefs', 'mountpoint': '/sys/kernel/tracing', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'fusectl': {'fstype': 'fusectl', 'mountpoint': '/sys/fs/fuse/connections', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'configfs': {'fstype': 'configfs', 'mountpoint': '/sys/kernel/config', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, '/dev/sda15': {'fstype': 'vfat', 'mountpoint': '/boot/efi', 'opts': 'rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro'}, 'binfmt_misc': {'fstype': 'binfmt_misc', 'mountpoint': '/proc/sys/fs/binfmt_misc', 'opts': 'rw,nosuid,nodev,noexec,relatime'}} mounts from proc
2026-10-19 23:59:53,946 - subp.py[DEBUG]: Running command ['blkid', '-tTYPE=iso9660', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2026-10-19 23:59:53,979 - performance.py[DEBUG]: Running ['blkid', '-tTYPE=iso9660', '-odevice'] took 0.033 seconds
2026-10-19 23:59:53,979 - performance.py[DEBUG]: Getting metadata took 0.035 seconds
2026-10-19 23:59:53,979 - sources[DEBUG]: Datasource DataSourceOVFNet [seed=None] not updated for events: boot-new-instance
2026-10-19 23:59:53,979 - handlers.py[DEBUG]: finish: init-network/search-OVFNet: SUCCESS: no network data found from DataSourceOVFNet
2026-10-19 23:59:53,979 - handlers.py[DEBUG]: start: init-network/search-MAAS: searching for network data from DataSourceMAAS
2026-10-19 23:59:53,979 - sources[DEBUG]: Seeing if we can get any data from <class 'cloudinit.sources.DataSourceMAAS.DataSourceMAAS'>
2026-10-19 23:59:53,979 - sources[DEBUG]: Update datasource metadata and network config due to events: boot-new-instance
2026-10-19 23:59:53,980 - sources[DEBUG]: Detected DataSourceMAAS [None]
2026-10-19 23:59:53,980 - performance.py[DEBUG]: Getting metadata took 0.000 seconds
2026-10-19 23:59:53,980 - sources[DEBUG]: Datasource DataSourceMAAS [None] not updated for events: boot-new-instance
2026-10-19 23:59:53,980 - handlers.py[DEBUG]: finish: init-network/search-MAAS: SUCCESS: no network data found from DataSourceMAAS
2026-10-19 23:59:53,980 - handlers.py[DEBUG]: start: init-network/search-GCE: searching for network data from DataSourceGCE
2026-10-19 23:59:53,980 - sources[DEBUG]: Seeing if we can get any data from <class 'cloudinit.sources.DataSourceGCE.DataSourceGCE'>
2026-10-19 23:59:53,980 - lifecycle.py[DEPRECATED]: 'user' of type string is deprecated in 22.2 and scheduled to be removed in 27.2. Use 'users' list instead.
2026-10-19 23:59:53,980 - sources[DEBUG]: Update datasource metadata and network config due to events: boot-new-instance
2026-10-19 23:59:53,980 - sources[DEBUG]: Detected DataSourceGCE
2026-10-19 23:59:53,980 - dmi.py[DEBUG]: querying dmi data /sys/class/dmi/id/product_name
2026-10-19 23:59:53,981 - dmi.py[DEBUG]: querying dmi data /sys/class/dmi/id/product_serial
2026-10-19 23:59:53,981 - DataSourceGCE.py[DEBUG]: Not running on google cloud. product-name=Standard PC (i440FX + PIIX, 1996) serial=N/A
2026-10-19 23:59:53,981 - DataSourceGCE.py[DEBUG]: Not running on GCE.
2026-10-19 23:59:53,981 - performance.py[DEBUG]: Getting metadata took 0.000 seconds
2026-10-19 23:59:53,981 - sources[DEBUG]: Datasource DataSourceGCE not updated for events: boot-new-instance
2026-10-19 23:59:53,981 - handlers.py[DEBUG]: finish: init-network/search-GCE: SUCCESS: no network data found from DataSourceGCE
2026-10-19 23:59:53,981 - handlers.py[DEBUG]: start: init-network/search-OpenStack: searching for network data from DataSourceOpenStack
2026-10-19 23:59:53,981 - sources[DEBUG]: Seeing if we can get any data from <class 'cloudinit.sources.DataSourceOpenStack.DataSourceOpenStack'>
2026-10-19 23:59:53,981 - sources[DEBUG]: Update datasource metadata and network config due to events: boot-new-instance
2026-10-19 23:59:53,981 - dmi.py[DEBUG]: querying dmi data /sys/class/dmi/id/product_name
2026-10-19 23:59:53,981 - dmi.py[DEBUG]: querying dmi data /sys/class/dmi/id/chassis_asset_tag
2026-10-19 23:59:53,981 - dmi.py[DEBUG]: querying dmi data /sys/class/dmi/id/chassis_asset_tag
2026-10-19 23:59:53,981 - util.py[DEBUG]: Reading from /proc/1/environ (quiet=False)
2026-10-19 23:59:53,981 - util.py[DEBUG]: Reading 100 bytes from /proc/1/environ
2026-10-19 23:59:53,981 - sources[DEBUG]: Did not detect DataSourceOpenStack [net,ver=None]
2026-10-19 23:59:53,981 - performance.py[DEBUG]: Getting metadata took 0.001 seconds
2026-10-19 23:59:53,982 - sources[DEBUG]: Datasource DataSourceOpenStack [net,ver=None] not updated for events: boot-new-instance
2026-10-19 23:59:53,982 - handlers.py[DEBUG]: finish: init-network/search-OpenStack: SUCCESS: no network data found from DataSourceOpenStack
2026-10-19 23:59:53,982 - handlers.py[DEBUG]: start: init-network/search-AliYun: searching for network data from DataSourceAliYun
2026-10-19 23:59:53,982 - sources[DEBUG]: Seeing if we can get any data from <class 'cloudinit.sources.DataSourceAliYun.DataSourceAliYun'>
2026-10-19 23:59:53,982 - sources[DEBUG]: Update datasource metadata and network config due to events: boot-new-instance
2026-10-19 23:59:53,982 - sources[DEBUG]: Detected DataSourceAliYun
2026-10-19 23:59:53,982 - dmi.py[DEBUG]: querying dmi data /sys/class/dmi/id/product_name
2026-10-19 23:59:53,982 - performance.py[DEBUG]: Getting metadata took 0.000 seconds
2026-10-19 23:59:53,982 - sources[DEBUG]: Datasource DataSourceAliYun not updated for events: boot-new-instance
2026-10-19 23:59:53,982 - handlers.py[DEBUG]: finish: init-network/search-AliYun: SUCCESS: no network data found from DataSourceAliYun
2026-10-19 23:59:53,982 - handlers.py[DEBUG]: start: init-network/search-Ec2: searching for network data from DataSourceEc2
2026-10-19 23:59:53,982 - sources[DEBUG]: Seeing if we can get any data from <class 'cloudinit.sources.DataSourceEc2.DataSourceEc2'>
2026-10-19 23:59:53,982 - sources[DEBUG]: Update datasource metadata and network config due to events: boot-new-instance
2026-10-19 23:59:53,982 - sources[DEBUG]: Detected DataSourceEc2
2026-10-19 23:59:53,983 - util.py[DEBUG]: Reading from /sys/hypervisor/uuid (quiet=False)
2026-10-19 23:59:53,983 - dmi.py[DEBUG]: querying dmi data /sys/class/dmi/id/product_uuid
2026-10-19 23:59:53,983 - dmi.py[DEBUG]: querying dmi data /sys/class/dmi/id/product_serial
2026-10-19 23:59:53,983 - dmi.py[DEBUG]: querying dmi data /sys/class/dmi/id/chassis_asset_tag
2026-10-19 23:59:53,983 - dmi.py[DEBUG]: querying dmi data /sys/class/dmi/id/sys_vendor
2026-10-19 23:59:53,983 - dmi.py[DEBUG]: querying dmi data /sys/class/dmi/id/product_name
2026-10-19 23:59:53,983 - DataSourceEc2.py[DEBUG]: strict_mode: warn, cloud_name=unknown cloud_platform=ec2
2026-10-19 23:59:54,003 - performance.py[DEBUG]: Resolving URL took 0.020 seconds
2026-10-19 23:59:54,008 - DataSourceEc2.py[DEBUG]: Removed the following from metadata urls: ['http://instance-data.:8773']
2026-10-19 23:59:54,010 - url_helper.py[DEBUG]: [0/1] open 'http://169.254.169.254/2009-04-04/meta-data/instance-id' with {'url': 'http://169.254.169.254/2009-04-04/meta-data/instance-id', 'stream': False, 'allow_redirects': True, 'method': 'GET', 'timeout': 50.0} configuration
2026-10-20 00:00:44,062 - url_helper.py[WARNING]: Calling 'http://169.254.169.254/2009-04-04/meta-data/instance-id' failed [50/240s]: request error [HTTPConnectionPool(host='169.254.169.254', port=80): Max retries exceeded with url: /2009-04-04/meta-data/instance-id (Caused by ConnectTimeoutError(<urllib3.connection.HTTPConnection object at 0x7fe28714b8c0>, 'Connection to 169.254.169.254 timed out. (connect timeout=50.0)'))]
2026-10-20 00:00:44,067 - url_helper.py[DEBUG]: [0/1] open 'http://[fd00:ec2::254]/2009-04-04/meta-data/instance-id' with {'url': 'http://[fd00:ec2::254]/2009-04-04/meta-data/instance-id', 'stream': False, 'allow_redirects': True, 'method': 'GET', 'timeout': 50.0} configuration
2026-10-20 00:00:47,131 - url_helper.py[WARNING]: Calling 'http://[fd00:ec2::254]/2009-04-04/meta-data/instance-id' failed [53/240s]: request error [HTTPConnectionPool(host='fd00:ec2::254', port=80): Max retries exceeded with url: /2009-04-04/meta-data/instance-id (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fe2870025d0>: Failed to establish a new connection: [Errno 113] No route to host'))]
2026-10-20 00:00:47,131 - url_helper.py[DEBUG]: Please wait 1 seconds while we wait to try again
2026-10-20 00:00:48,131 - url_helper.py[DEBUG]: [0/1] open 'http://169.254.169.254/2009-04-04/meta-data/instance-id' with {'url': 'http://169.254.169.254/2009-04-04/meta-data/instance-id', 'stream': False, 'allow_redirects': True, 'method': 'GET', 'timeout': 50.0} configuration
2026-10-20 00:01:38,183 - url_helper.py[WARNING]: Calling 'http://169.254.169.254/2009-04-04/meta-data/instance-id' failed [104/240s]: request error [HTTPConnectionPool(host='169.254.169.254', port=80): Max retries exceeded with url: /2009-04-04/meta-data/instance-id (Caused by ConnectTimeoutError(<urllib3.connection.HTTPConnection object at 0x7fe287002fd0>, 'Connection to 169.254.169.254 timed out. (connect timeout=50.0)'))]
2026-10-20 00:01:38,183 - url_helper.py[DEBUG]: [0/1] open 'http://[fd00:ec2::254]/2009-04-04/meta-data/instance-id' with {'url': 'http://[fd00:ec2::254]/2009-04-04/meta-data/instance-id', 'stream': False, 'allow_redirects': True, 'method': 'GET', 'timeout': 50.0} configuration
2026-10-20 00:02:28,233 - url_helper.py[WARNING]: Calling 'http://[fd00:ec2::254]/2009-04-04/meta-data/instance-id' failed [154/240s]: request error [HTTPConnectionPool(host='fd00:ec2::254', port=80): Max retries exceeded with url: /2009-04-04/meta-data/instance-id (Caused by ConnectTimeoutError(<urllib3.connection.HTTPConnection object at 0x7fe287167360>, 'Connection to fd00:ec2::254 timed out. (connect timeout=50.0)'))]
2026-10-20 00:02:28,233 - url_helper.py[DEBUG]: Please wait 1 seconds while we wait to try again
2026-10-20 00:02:29,234 - url_helper.py[DEBUG]: [0/1] open 'http://169.254.169.254/2009-04-04/meta-data/instance-id' with {'url': 'http://169.254.169.254/2009-04-04/meta-data/instance-id', 'stream': False, 'allow_redirects': True, 'method': 'GET', 'timeout': 50.0} configuration
2026-10-20 00:03:19,281 - url_helper.py[WARNING]: Calling 'http://169.254.169.254/2009-04-04/meta-data/instance-id' failed [205/240s]: request error [HTTPConnectionPool(host='169.254.169.254', port=80): Max retries exceeded with url: /2009-04-04/meta-data/instance-id (Caused by ConnectTimeoutError(<urllib3.connection.HTTPConnection object at 0x7fe287167100>, 'Connection to 169.254.169.254 timed out. (connect timeout=50.0)'))]
2026-10-20 00:03:19,281 - url_helper.py[DEBUG]: [0/1] open 'http://[fd00:ec2::254]/2009-04-04/meta-data/instance-id' with {'url': 'http://[fd00:ec2::254]/2009-04-04/meta-data/instance-id', 'stream': False, 'allow_redirects': True, 'method': 'GET', 'timeout': 34.0} configuration
2026-10-20 00:03:53,321 - url_helper.py[WARNING]: Calling 'http://[fd00:ec2::254]/2009-04-04/meta-data/instance-id' failed [239/240s]: request error [HTTPConnectionPool(host='fd00:ec2::254', port=80): Max retries exceeded with url: /2009-04-04/meta-data/instance-id (Caused by ConnectTimeoutError(<urllib3.connection.HTTPConnection object at 0x7fe286ff4ef0>, 'Connection to fd00:ec2::254 timed out. (connect timeout=34.0)'))]
2026-10-20 00:03:53,322 - DataSourceEc2.py[CRITICAL]: Giving up on md from ['http://169.254.169.254/2009-04-04/meta-data/instance-id', 'http://[fd00:ec2::254]/2009-04-04/meta-data/instance-id'] after 239 seconds
2026-10-20 00:03:53,322 - performance.py[DEBUG]: Getting metadata took 239.339 seconds
2026-10-20 00:03:53,322 - sources[DEBUG]: Datasource DataSourceEc2 not updated for events: boot-new-instance
2026-10-20 00:03:53,322 - handlers.py[DEBUG]: finish: init-network/search-Ec2: SUCCESS: no network data found from DataSourceEc2
2026-10-20 00:03:53,322 - handlers.py[DEBUG]: start: init-network/search-CloudStack: searching for network data from DataSourceCloudStack
2026-10-20 00:03:53,322 - sources[DEBUG]: Seeing if we can get any data from <class 'cloudinit.sources.DataSourceCloudStack.DataSourceCloudStack'>
2026-10-20 00:03:53,328 - DataSourceCloudStack.py[DEBUG]: DNS Entry data-server not found
2026-10-20 00:03:53,330 - distros[DEBUG]: DHCP client not found: dhcpcd
2026-10-20 00:03:53,330 - distros[DEBUG]: DHCP client selected: dhclient
2026-10-20 00:03:53,330 - util.py[DEBUG]: Reading from /run/dhclient.lease (quiet=False)
2026-10-20 00:03:53,330 - DataSourceCloudStack.py[DEBUG]: No DHCP found, using default gateway
2026-10-20 00:03:53,330 - util.py[DEBUG]: Reading from /proc/net/route (quiet=False)
2026-10-20 00:03:53,331 - util.py[DEBUG]: Reading 512 bytes from /proc/net/route
2026-10-20 00:03:53,331 - DataSourceCloudStack.py[DEBUG]: Found default route, gateway is 109.199.112.1
2026-10-20 00:03:53,331 - sources[DEBUG]: Update datasource metadata and network config due to events: boot-new-instance
2026-10-20 00:03:53,331 - sources[DEBUG]: Detected DataSourceCloudStack
2026-10-20 00:03:53,331 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/cs/network-config (quiet=False)
2026-10-20 00:03:53,331 - util.py[DEBUG]: No network config provided: [Errno 2] No such file or directory: '/var/lib/cloud/seed/cs/network-config'
2026-10-20 00:03:53,332 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/cs/meta-data (quiet=False)
2026-10-20 00:03:53,332 - url_helper.py[DEBUG]: [0/1] open 'http://109.199.112.1/latest/meta-data/instance-id' with {'url': 'http://109.199.112.1/latest/meta-data/instance-id', 'stream': False, 'allow_redirects': True, 'method': 'GET', 'timeout': 50.0, 'headers': {'User-Agent': 'Cloud-Init/25.1.4'}} configuration
2026-10-20 00:04:43,386 - url_helper.py[WARNING]: Calling 'http://109.199.112.1/latest/meta-data/instance-id' failed [50/120s]: request error [HTTPConnectionPool(host='109.199.112.1', port=80): Max retries exceeded with url: /latest/meta-data/instance-id (Caused by ConnectTimeoutError(<urllib3.connection.HTTPConnection object at 0x7fe286fa6580>, 'Connection to 109.199.112.1 timed out. (connect timeout=50.0)'))]
2026-10-20 00:04:43,386 - url_helper.py[DEBUG]: Please wait 1 seconds while we wait to try again
2026-10-20 00:04:44,386 - url_helper.py[DEBUG]: [0/1] open 'http://109.199.112.1/latest/meta-data/instance-id' with {'url': 'http://109.199.112.1/latest/meta-data/instance-id', 'stream': False, 'allow_redirects': True, 'method': 'GET', 'timeout': 50.0, 'headers': {'User-Agent': 'Cloud-Init/25.1.4'}} configuration
2026-10-20 00:05:34,404 - url_helper.py[WARNING]: Calling 'http://109.199.112.1/latest/meta-data/instance-id' failed [101/120s]: request error [HTTPConnectionPool(host='109.199.112.1', port=80): Max retries exceeded with url: /latest/meta-data/instance-id (Caused by ConnectTimeoutError(<urllib3.connection.HTTPConnection object at 0x7fe286fa6030>, 'Connection to 109.199.112.1 timed out. (connect timeout=50.0)'))]
2026-10-20 00:05:34,404 - url_helper.py[DEBUG]: Please wait 1 seconds while we wait to try again
2026-10-20 00:05:35,405 - url_helper.py[DEBUG]: [0/1] open 'http://109.199.112.1/latest/meta-data/instance-id' with {'url': 'http://109.199.112.1/latest/meta-data/instance-id', 'stream': False, 'allow_redirects': True, 'method': 'GET', 'timeout': 17.0, 'headers': {'User-Agent': 'Cloud-Init/25.1.4'}} configuration
2026-10-20 00:05:52,418 - url_helper.py[WARNING]: Calling 'http://109.199.112.1/latest/meta-data/instance-id' failed [119/120s]: request error [HTTPConnectionPool(host='109.199.112.1', port=80): Max retries exceeded with url: /latest/meta-data/instance-id (Caused by ConnectTimeoutError(<urllib3.connection.HTTPConnection object at 0x7fe286fa5ae0>, 'Connection to 109.199.112.1 timed out. (connect timeout=17.0)'))]
2026-10-20 00:05:52,418 - DataSourceCloudStack.py[CRITICAL]: Giving up on waiting for the metadata from ['http://109.199.112.1/latest/meta-data/instance-id'] after 119 seconds
2026-10-20 00:05:52,418 - performance.py[DEBUG]: Getting metadata took 119.087 seconds
2026-10-20 00:05:52,418 - sources[DEBUG]: Datasource DataSourceCloudStack not updated for events: boot-new-instance
2026-10-20 00:05:52,418 - handlers.py[DEBUG]: finish: init-network/search-CloudStack: SUCCESS: no network data found from DataSourceCloudStack
2026-10-20 00:05:52,418 - handlers.py[DEBUG]: start: init-network/search-Bigstep: searching for network data from DataSourceBigstep
2026-10-20 00:05:52,418 - sources[DEBUG]: Seeing if we can get any data from <class 'cloudinit.sources.DataSourceBigstep.DataSourceBigstep'>
2026-10-20 00:05:52,418 - sources[DEBUG]: Update datasource metadata and network config due to events: boot-new-instance
2026-10-20 00:05:52,418 - sources[DEBUG]: Detected DataSourceBigstep
2026-10-20 00:05:52,418 - util.py[DEBUG]: Reading from /var/lib/cloud/data/seed/bigstep/url (quiet=False)
2026-10-20 00:05:52,418 - performance.py[DEBUG]: Getting metadata took 0.000 seconds
2026-10-20 00:05:52,419 - sources[DEBUG]: Datasource DataSourceBigstep not updated for events: boot-new-instance
2026-10-20 00:05:52,419 - handlers.py[DEBUG]: finish: init-network/search-Bigstep: SUCCESS: no network data found from DataSourceBigstep
2026-10-20 00:05:52,419 - handlers.py[DEBUG]: start: init-network/search-OracleNet: searching for network data from DataSourceOracleNet
2026-10-20 00:05:52,419 - sources[DEBUG]: Seeing if we can get any data from <class 'cloudinit.sources.DataSourceOracle.DataSourceOracleNet'>
2026-10-20 00:05:52,419 - util.py[DEBUG]: Reading from /sys/class/net/eth0/address (quiet=False)
2026-10-20 00:05:52,419 - util.py[DEBUG]: Reading 18 bytes from /sys/class/net/eth0/address
2026-10-20 00:05:52,419 - util.py[DEBUG]: Reading from /sys/class/net/lo/address (quiet=False)
2026-10-20 00:05:52,420 - util.py[DEBUG]: Reading 18 bytes from /sys/class/net/lo/address
2026-10-20 00:05:52,420 - util.py[DEBUG]: Reading from /sys/class/net/docker0/address (quiet=False)
2026-10-20 00:05:52,420 - util.py[DEBUG]: Reading 18 bytes from /sys/class/net/docker0/address
2026-10-20 00:05:52,420 - sources[DEBUG]: Update datasource metadata and network config due to events: boot-new-instance
2026-10-20 00:05:52,420 - dmi.py[DEBUG]: querying dmi data /sys/class/dmi/id/chassis_asset_tag
2026-10-20 00:05:52,420 - sources[DEBUG]: Did not detect DataSourceOracleNet
2026-10-20 00:05:52,421 - performance.py[DEBUG]: Getting metadata took 0.001 seconds
2026-10-20 00:05:52,421 - sources[DEBUG]: Datasource DataSourceOracleNet not updated for events: boot-new-instance
2026-10-20 00:05:52,421 - handlers.py[DEBUG]: finish: init-network/search-OracleNet: SUCCESS: no network data found from DataSourceOracleNet
2026-10-20 00:05:52,421 - handlers.py[DEBUG]: start: init-network/search-Exoscale: searching for network data from DataSourceExoscale
2026-10-20 00:05:52,421 - sources[DEBUG]: Seeing if we can get any data from <class 'cloudinit.sources.DataSourceExoscale.DataSourceExoscale'>
2026-10-20 00:05:52,421 - DataSourceExoscale.py[DEBUG]: Initializing the Exoscale datasource
2026-10-20 00:05:52,421 - sources[DEBUG]: Update datasource metadata and network config due to events: boot-new-instance
2026-10-20 00:05:52,421 - dmi.py[DEBUG]: querying dmi data /sys/class/dmi/id/product_name
2026-10-20 00:05:52,422 - sources[DEBUG]: Did not detect DataSourceExoscale
2026-10-20 00:05:52,422 - performance.py[DEBUG]: Getting metadata took 0.000 seconds
2026-10-20 00:05:52,422 - sources[DEBUG]: Datasource DataSourceExoscale not updated for events: boot-new-instance
2026-10-20 00:05:52,422 - handlers.py[DEBUG]: finish: init-network/search-Exoscale: SUCCESS: no network data found from DataSourceExoscale
2026-10-20 00:05:52,422 - handlers.py[DEBUG]: start: init-network/search-UpCloud: searching for network data from DataSourceUpCloud
2026-10-20 00:05:52,422 - sources[DEBUG]: Seeing if we can get any data from <class 'cloudinit.sources.DataSourceUpCloud.DataSourceUpCloud'>
2026-10-20 00:05:52,422 - sources[DEBUG]: Update datasource metadata and network config due to events: boot-new-instance
2026-10-20 00:05:52,422 - sources[DEBUG]: Detected DataSourceUpCloud
2026-10-20 00:05:52,422 - dmi.py[DEBUG]: querying dmi data /sys/class/dmi/id/sys_vendor
2026-10-20 00:05:52,422 - performance.py[DEBUG]: Getting metadata took 0.000 seconds
2026-10-20 00:05:52,422 - sources[DEBUG]: Datasource DataSourceUpCloud not updated for events: boot-new-instance
2026-10-20 00:05:52,422 - handlers.py[DEBUG]: finish: init-network/search-UpCloud: SUCCESS: no network data found from DataSourceUpCloud
2026-10-20 00:05:52,422 - handlers.py[DEBUG]: start: init-network/search-Akamai: searching for network data from DataSourceAkamai
2026-10-20 00:05:52,422 - sources[DEBUG]: Seeing if we can get any data from <class 'cloudinit.sources.DataSourceAkamai.DataSourceAkamai'>
2026-10-20 00:05:52,423 - DataSourceAkamai.py[DEBUG]: Setting up Akamai DataSource
2026-10-20 00:05:52,423 - dmi.py[DEBUG]: querying dmi data /sys/class/dmi/id/board_serial
2026-10-20 00:05:52,423 - dmi.py[DEBUG]: did not find /sys/class/dmi/id/board_serial
2026-10-20 00:05:52,423 - subp.py[DEBUG]: Running command ['/sbin/dmidecode', '--string', 'baseboard-serial-number'] with allowed return codes [0] (shell=False, capture=True)
2026-10-20 00:05:52,428 - dmi.py[DEBUG]: dmidecode returned '' for 'baseboard-serial-number'
2026-10-20 00:05:52,428 - sources[DEBUG]: Update datasource metadata and network config due to events: boot-new-instance
2026-10-20 00:05:52,428 - sources[DEBUG]: Detected DataSourceAkamai
2026-10-20 00:05:52,428 - DataSourceAkamai.py[DEBUG]: Getting data from Akamai DataSource
2026-10-20 00:05:52,429 - dmi.py[DEBUG]: querying dmi data /sys/class/dmi/id/sys_vendor
2026-10-20 00:05:52,429 - DataSourceAkamai.py[INFO]: Not running on Akamai, not running.
2026-10-20 00:05:52,429 - performance.py[DEBUG]: Getting metadata took 0.001 seconds
2026-10-20 00:05:52,429 - sources[DEBUG]: Datasource DataSourceAkamai not updated for events: boot-new-instance
2026-10-20 00:05:52,429 - handlers.py[DEBUG]: finish: init-network/search-Akamai: SUCCESS: no network data found from DataSourceAkamai
2026-10-20 00:05:52,429 - handlers.py[DEBUG]: start: init-network/search-CloudCIX: searching for network data from DataSourceCloudCIX
2026-10-20 00:05:52,429 - sources[DEBUG]: Seeing if we can get any data from <class 'cloudinit.sources.DataSourceCloudCIX.DataSourceCloudCIX'>
2026-10-20 00:05:52,429 - sources[DEBUG]: Update datasource metadata and network config due to events: boot-new-instance
2026-10-20 00:05:52,429 - dmi.py[DEBUG]: querying dmi data /sys/class/dmi/id/product_name
2026-10-20 00:05:52,430 - sources[DEBUG]: Did not detect DataSourceCloudCIX
2026-10-20 00:05:52,430 - performance.py[DEBUG]: Getting metadata took 0.001 seconds
2026-10-20 00:05:52,430 - sources[DEBUG]: Datasource DataSourceCloudCIX not updated for events: boot-new-instance
2026-10-20 00:05:52,430 - handlers.py[DEBUG]: finish: init-network/search-CloudCIX: SUCCESS: no network data found from DataSourceCloudCIX
2026-10-20 00:05:52,430 - handlers.py[DEBUG]: start: init-network/search-None: searching for network data from DataSourceNone
2026-10-20 00:05:52,430 - sources[DEBUG]: Seeing if we can get any data from <class 'cloudinit.sources.DataSourceNone.DataSourceNone'>
2026-10-20 00:05:52,430 - sources[DEBUG]: Update datasource metadata and network config due to events: boot-new-instance
2026-10-20 00:05:52,430 - sources[DEBUG]: Detected DataSourceNone
2026-10-20 00:05:52,431 - util.py[DEBUG]: Reading from /etc/hosts (quiet=False)
2026-10-20 00:05:52,431 - util.py[DEBUG]: Reading 565 bytes from /etc/hosts
2026-10-20 00:05:52,434 - util.py[DEBUG]: Writing to /run/cloud-init/cloud-id-none - wb: [644] 5 bytes
2026-10-20 00:05:52,435 - util.py[DEBUG]: Creating symbolic link from '/run/cloud-init/cloud-id' => '/run/cloud-init/cloud-id-none'
2026-10-20 00:05:52,435 - atomic_helper.py[DEBUG]: Atomically writing to file /run/cloud-init/instance-data-sensitive.json (via temporary file /run/cloud-init/tmp2pzupc8v) - w: [600] 12744 bytes/chars
2026-10-20 00:05:52,437 - atomic_helper.py[DEBUG]: Atomically writing to file /run/cloud-init/instance-data.json (via temporary file /run/cloud-init/tmp49r4zd1x) - w: [644] 1487 bytes/chars
2026-10-20 00:05:52,437 - performance.py[DEBUG]: Getting metadata took 0.007 seconds
2026-10-20 00:05:52,437 - handlers.py[DEBUG]: finish: init-network/search-None: SUCCESS: found network data from DataSourceNone
2026-10-20 00:05:52,437 - util.py[DEBUG]: Attempting to remove /var/lib/cloud/instance
2026-10-20 00:05:52,437 - stages.py[INFO]: Loaded datasource DataSourceNone - DataSourceNone
2026-10-20 00:05:52,437 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg (quiet=False)
2026-10-20 00:05:52,437 - util.py[DEBUG]: Reading 2724 bytes from /etc/cloud/cloud.cfg
2026-10-20 00:05:52,438 - util.py[DEBUG]: Attempting to load yaml from string of length 2724 with allowed root types (<class 'dict'>,)
2026-10-20 00:05:52,445 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/99-ssh.cfg (quiet=False)
2026-10-20 00:05:52,445 - util.py[DEBUG]: Reading 48 bytes from /etc/cloud/cloud.cfg.d/99-ssh.cfg
2026-10-20 00:05:52,445 - util.py[DEBUG]: Attempting to load yaml from string of length 48 with allowed root types (<class 'dict'>,)
2026-10-20 00:05:52,446 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/05_logging.cfg (quiet=False)
2026-10-20 00:05:52,446 - util.py[DEBUG]: Reading 2071 bytes from /etc/cloud/cloud.cfg.d/05_logging.cfg
2026-10-20 00:05:52,446 - util.py[DEBUG]: Attempting to load yaml from string of length 2071 with allowed root types (<class 'dict'>,)
2026-10-20 00:05:52,447 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg (quiet=False)
2026-10-20 00:05:52,447 - util.py[DEBUG]: Reading 309 bytes from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg
2026-10-20 00:05:52,448 - util.py[DEBUG]: Attempting to load yaml from string of length 309 with allowed root types (<class 'dict'>,)
2026-10-20 00:05:52,449 - util.py[DEBUG]: Reading from /run/cloud-init/cloud.cfg (quiet=False)
2026-10-20 00:05:52,449 - util.py[DEBUG]: Reading 86 bytes from /run/cloud-init/cloud.cfg
2026-10-20 00:05:52,449 - util.py[DEBUG]: Attempting to load yaml from string of length 86 with allowed root types (<class 'dict'>,)
2026-10-20 00:05:52,449 - util.py[DEBUG]: Attempting to load yaml from string of length 0 with allowed root types (<class 'dict'>,)
2026-10-20 00:05:52,449 - util.py[DEBUG]: loaded blob returned None, returning default.
2026-10-20 00:05:52,450 - util.py[DEBUG]: Attempting to remove /var/lib/cloud/instance
2026-10-20 00:05:52,450 - util.py[DEBUG]: Creating symbolic link from '/var/lib/cloud/instance' => '/var/lib/cloud/instances/iid-datasource-none'
2026-10-20 00:05:52,451 - util.py[DEBUG]: Reading from /var/lib/cloud/instances/iid-datasource-none/datasource (quiet=False)
2026-10-20 00:05:52,451 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/iid-datasource-none/datasource - wb: [644] 31 bytes
2026-10-20 00:05:52,452 - util.py[DEBUG]: Writing to /var/lib/cloud/data/previous-datasource - wb: [644] 31 bytes
2026-10-20 00:05:52,452 - util.py[DEBUG]: Reading from /var/lib/cloud/data/instance-id (quiet=False)
2026-10-20 00:05:52,453 - util.py[DEBUG]: Reading 41 bytes from /var/lib/cloud/data/instance-id
2026-10-20 00:05:52,453 - stages.py[DEBUG]: previous iid found to be 3a7b79c34864e435b2e39df1a836248be4942184
2026-10-20 00:05:52,453 - util.py[DEBUG]: Writing to /var/lib/cloud/data/instance-id - wb: [644] 20 bytes
2026-10-20 00:05:52,454 - util.py[DEBUG]: Writing to /run/cloud-init/.instance-id - wb: [644] 20 bytes
2026-10-20 00:05:52,455 - util.py[DEBUG]: Writing to /var/lib/cloud/data/previous-instance-id - wb: [644] 41 bytes
2026-10-20 00:05:52,456 - util.py[DEBUG]: Writing to /var/lib/cloud/instance/obj.pkl - wb: [400] 6965 bytes
2026-10-20 00:05:52,456 - main.py[DEBUG]: [net] init will now be targeting instance id: iid-datasource-none. new=True
2026-10-20 00:05:52,456 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg (quiet=False)
2026-10-20 00:05:52,456 - util.py[DEBUG]: Reading 2724 bytes from /etc/cloud/cloud.cfg
2026-10-20 00:05:52,457 - util.py[DEBUG]: Attempting to load yaml from string of length 2724 with allowed root types (<class 'dict'>,)
2026-10-20 00:05:52,460 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/99-ssh.cfg (quiet=False)
2026-10-20 00:05:52,461 - util.py[DEBUG]: Reading 48 bytes from /etc/cloud/cloud.cfg.d/99-ssh.cfg
2026-10-20 00:05:52,461 - util.py[DEBUG]: Attempting to load yaml from string of length 48 with allowed root types (<class 'dict'>,)
2026-10-20 00:05:52,461 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/05_logging.cfg (quiet=False)
2026-10-20 00:05:52,461 - util.py[DEBUG]: Reading 2071 bytes from /etc/cloud/cloud.cfg.d/05_logging.cfg
2026-10-20 00:05:52,461 - util.py[DEBUG]: Attempting to load yaml from string of length 2071 with allowed root types (<class 'dict'>,)
2026-10-20 00:05:52,462 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg (quiet=False)
2026-10-20 00:05:52,463 - util.py[DEBUG]: Reading 309 bytes from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg
2026-10-20 00:05:52,463 - util.py[DEBUG]: Attempting to load yaml from string of length 309 with allowed root types (<class 'dict'>,)
2026-10-20 00:05:52,464 - util.py[DEBUG]: Reading from /run/cloud-init/cloud.cfg (quiet=False)
2026-10-20 00:05:52,464 - util.py[DEBUG]: Reading 86 bytes from /run/cloud-init/cloud.cfg
2026-10-20 00:05:52,464 - util.py[DEBUG]: Attempting to load yaml from string of length 86 with allowed root types (<class 'dict'>,)
2026-10-20 00:05:52,465 - util.py[DEBUG]: Attempting to load yaml from string of length 0 with allowed root types (<class 'dict'>,)
2026-10-20 00:05:52,465 - util.py[DEBUG]: loaded blob returned None, returning default.
2026-10-20 00:05:52,466 - util.py[DEBUG]: Reading from /sys/class/net/eth0/address (quiet=False)
2026-10-20 00:05:52,466 - util.py[DEBUG]: Reading 18 bytes from /sys/class/net/eth0/address
2026-10-20 00:05:52,466 - util.py[DEBUG]: Reading from /sys/class/net/lo/address (quiet=False)
2026-10-20 00:05:52,467 - util.py[DEBUG]: Reading 18 bytes from /sys/class/net/lo/address
2026-10-20 00:05:52,467 - util.py[DEBUG]: Reading from /sys/class/net/docker0/address (quiet=False)
2026-10-20 00:05:52,467 - util.py[DEBUG]: Reading 18 bytes from /sys/class/net/docker0/address
2026-10-20 00:05:52,467 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2026-10-20 00:05:52,467 - util.py[DEBUG]: Reading from /sys/class/net/eth0/name_assign_type (quiet=False)
2026-10-20 00:05:52,468 - util.py[DEBUG]: Reading 2 bytes from /sys/class/net/eth0/name_assign_type
2026-10-20 00:05:52,468 - util.py[DEBUG]: Reading from /sys/class/net/docker0/name_assign_type (quiet=False)
2026-10-20 00:05:52,468 - util.py[DEBUG]: Reading 2 bytes from /sys/class/net/docker0/name_assign_type
2026-10-20 00:05:52,468 - util.py[DEBUG]: Reading from /sys/class/net/eth0/address (quiet=False)
2026-10-20 00:05:52,468 - util.py[DEBUG]: Reading 18 bytes from /sys/class/net/eth0/address
2026-10-20 00:05:52,468 - util.py[DEBUG]: Reading from /sys/class/net/eth0/device/device (quiet=False)
2026-10-20 00:05:52,468 - util.py[DEBUG]: Reading 7 bytes from /sys/class/net/eth0/device/device
2026-10-20 00:05:52,468 - util.py[DEBUG]: Reading from /sys/class/net/lo/address (quiet=False)
2026-10-20 00:05:52,468 - util.py[DEBUG]: Reading 18 bytes from /sys/class/net/lo/address
2026-10-20 00:05:52,468 - util.py[DEBUG]: Reading from /sys/class/net/lo/device/device (quiet=False)
2026-10-20 00:05:52,468 - net[DEBUG]: Ignoring bridge interface: docker0
2026-10-20 00:05:52,469 - util.py[DEBUG]: Reading from /sys/class/net/eth0/carrier (quiet=False)
2026-10-20 00:05:52,469 - util.py[DEBUG]: Reading 2 bytes from /sys/class/net/eth0/carrier
2026-10-20 00:05:52,469 - util.py[DEBUG]: Reading from /sys/class/net/eth0/device/features (quiet=False)
2026-10-20 00:05:52,469 - util.py[DEBUG]: Reading 65 bytes from /sys/class/net/eth0/device/features
2026-10-20 00:05:52,469 - util.py[DEBUG]: Reading from /sys/class/net/eth0/address (quiet=False)
2026-10-20 00:05:52,469 - util.py[DEBUG]: Reading 18 bytes from /sys/class/net/eth0/address
2026-10-20 00:05:52,469 - util.py[DEBUG]: Reading from /sys/class/net/eth0/address (quiet=False)
2026-10-20 00:05:52,469 - util.py[DEBUG]: Reading 18 bytes from /sys/class/net/eth0/address
2026-10-20 00:05:52,469 - util.py[DEBUG]: Reading from /sys/class/net/lo/address (quiet=False)
2026-10-20 00:05:52,469 - util.py[DEBUG]: Reading 18 bytes from /sys/class/net/lo/address
2026-10-20 00:05:52,469 - util.py[DEBUG]: Reading from /sys/class/net/docker0/address (quiet=False)
2026-10-20 00:05:52,469 - util.py[DEBUG]: Reading 18 bytes from /sys/class/net/docker0/address
2026-10-20 00:05:52,470 - util.py[DEBUG]: Reading from /sys/class/net/eth0/name_assign_type (quiet=False)
2026-10-20 00:05:52,470 - util.py[DEBUG]: Reading 2 bytes from /sys/class/net/eth0/name_assign_type
2026-10-20 00:05:52,470 - util.py[DEBUG]: Reading from /sys/class/net/docker0/name_assign_type (quiet=False)
2026-10-20 00:05:52,470 - util.py[DEBUG]: Reading 2 bytes from /sys/class/net/docker0/name_assign_type
2026-10-20 00:05:52,470 - util.py[DEBUG]: Reading from /sys/class/net/eth0/address (quiet=False)
2026-10-20 00:05:52,470 - util.py[DEBUG]: Reading 18 bytes from /sys/class/net/eth0/address
2026-10-20 00:05:52,470 - util.py[DEBUG]: Reading from /sys/class/net/eth0/device/device (quiet=False)
2026-10-20 00:05:52,470 - util.py[DEBUG]: Reading 7 bytes from /sys/class/net/eth0/device/device
2026-10-20 00:05:52,470 - util.py[DEBUG]: Reading from /sys/class/net/lo/address (quiet=False)
2026-10-20 00:05:52,470 - util.py[DEBUG]: Reading 18 bytes from /sys/class/net/lo/address
2026-10-20 00:05:52,470 - util.py[DEBUG]: Reading from /sys/class/net/lo/device/device (quiet=False)
2026-10-20 00:05:52,470 - net[DEBUG]: Ignoring bridge interface: docker0
2026-10-20 00:05:52,470 - util.py[DEBUG]: Reading from /sys/class/net/eth0/carrier (quiet=False)
2026-10-20 00:05:52,471 - util.py[DEBUG]: Reading 2 bytes from /sys/class/net/eth0/carrier
2026-10-20 00:05:52,471 - util.py[DEBUG]: Reading from /sys/class/net/eth0/device/features (quiet=False)
2026-10-20 00:05:52,471 - util.py[DEBUG]: Reading 65 bytes from /sys/class/net/eth0/device/features
2026-10-20 00:05:52,471 - util.py[DEBUG]: Reading from /sys/class/net/eth0/address (quiet=False)
2026-10-20 00:05:52,471 - util.py[DEBUG]: Reading 18 bytes from /sys/class/net/eth0/address
2026-10-20 00:05:52,471 - atomic_helper.py[DEBUG]: Atomically writing to file /var/lib/cloud/instance/network-config.json (via temporary file /var/lib/cloud/instance/tmp1092atat) - w: [600] 170 bytes/chars
2026-10-20 00:05:52,471 - util.py[DEBUG]: Creating symbolic link from '/run/cloud-init/network-config.json' => '/var/lib/cloud/instance/network-config.json'
2026-10-20 00:05:52,471 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-network-config-v2.json (quiet=False)
2026-10-20 00:05:52,474 - util.py[DEBUG]: Reading 17906 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-network-config-v2.json
2026-10-20 00:05:52,474 - schema.py[DEBUG]: Validating network-config with netplan API
2026-10-20 00:05:52,475 - util.py[DEBUG]: Writing to /run/cloud-init/tmp/tmphw63ku8y/etc/netplan/network-config.yaml - wb: [600] 201 bytes
2026-10-20 00:05:52,477 - util.py[DEBUG]: Reading from /sys/class/net/eth0/device/device (quiet=False)
2026-10-20 00:05:52,477 - util.py[DEBUG]: Reading 7 bytes from /sys/class/net/eth0/device/device
2026-10-20 00:05:52,477 - util.py[DEBUG]: Reading from /sys/class/net/eth0/addr_assign_type (quiet=False)
2026-10-20 00:05:52,477 - util.py[DEBUG]: Reading 2 bytes from /sys/class/net/eth0/addr_assign_type
2026-10-20 00:05:52,477 - util.py[DEBUG]: Reading from /sys/class/net/eth0/uevent (quiet=False)
2026-10-20 00:05:52,478 - util.py[DEBUG]: Reading 25 bytes from /sys/class/net/eth0/uevent
2026-10-20 00:05:52,478 - util.py[DEBUG]: Reading from /sys/class/net/eth0/address (quiet=False)
2026-10-20 00:05:52,478 - util.py[DEBUG]: Reading 18 bytes from /sys/class/net/eth0/address
2026-10-20 00:05:52,478 - net[DEBUG]: ovs-vsctl not in PATH; not detecting Open vSwitch interfaces
2026-10-20 00:05:52,478 - util.py[DEBUG]: Reading from /sys/class/net/eth0/device/device (quiet=False)
2026-10-20 00:05:52,478 - util.py[DEBUG]: Reading 7 bytes from /sys/class/net/eth0/device/device
2026-10-20 00:05:52,478 - util.py[DEBUG]: Reading from /sys/class/net/lo/addr_assign_type (quiet=False)
2026-10-20 00:05:52,478 - util.py[DEBUG]: Reading 2 bytes from /sys/class/net/lo/addr_assign_type
2026-10-20 00:05:52,478 - util.py[DEBUG]: Reading from /sys/class/net/lo/uevent (quiet=False)
2026-10-20 00:05:52,479 - util.py[DEBUG]: Reading 23 bytes from /sys/class/net/lo/uevent
2026-10-20 00:05:52,479 - util.py[DEBUG]: Reading from /sys/class/net/lo/address (quiet=False)
2026-10-20 00:05:52,479 - util.py[DEBUG]: Reading 18 bytes from /sys/class/net/lo/address
2026-10-20 00:05:52,479 - util.py[DEBUG]: Reading from /sys/class/net/lo/device/device (quiet=False)
2026-10-20 00:05:52,479 - util.py[DEBUG]: Reading from /sys/class/net/docker0/addr_assign_type (quiet=False)
2026-10-20 00:05:52,479 - util.py[DEBUG]: Reading 2 bytes from /sys/class/net/docker0/addr_assign_type
2026-10-20 00:05:52,479 - util.py[DEBUG]: Reading from /sys/class/net/eth0/type (quiet=False)
2026-10-20 00:05:52,479 - util.py[DEBUG]: Reading 2 bytes from /sys/class/net/eth0/type
2026-10-20 00:05:52,479 - util.py[DEBUG]: Reading from /sys/class/net/lo/type (quiet=False)
2026-10-20 00:05:52,479 - util.py[DEBUG]: Reading 4 bytes from /sys/class/net/lo/type
2026-10-20 00:05:52,479 - networking.py[DEBUG]: net: all expected physical devices present
2026-10-20 00:05:52,479 - stages.py[DEBUG]: applying net config names for {'ethernets': {'eth0': {'dhcp4': True, 'dhcp6': True, 'set-name': 'eth0', 'match': {'macaddress': '00:50:56:5e:95:7b'}}}, 'version': 2}
2026-10-20 00:05:52,479 - util.py[DEBUG]: Reading from /sys/class/net/eth0/device/device (quiet=False)
2026-10-20 00:05:52,479 - util.py[DEBUG]: Reading 7 bytes from /sys/class/net/eth0/device/device
2026-10-20 00:05:52,479 - util.py[DEBUG]: Reading from /sys/class/net/eth0/addr_assign_type (quiet=False)
2026-10-20 00:05:52,480 - util.py[DEBUG]: Reading 2 bytes from /sys/class/net/eth0/addr_assign_type
2026-10-20 00:05:52,480 - util.py[DEBUG]: Reading from /sys/class/net/eth0/uevent (quiet=False)
2026-10-20 00:05:52,480 - util.py[DEBUG]: Reading 25 bytes from /sys/class/net/eth0/uevent
2026-10-20 00:05:52,480 - util.py[DEBUG]: Reading from /sys/class/net/eth0/address (quiet=False)
2026-10-20 00:05:52,480 - util.py[DEBUG]: Reading 18 bytes from /sys/class/net/eth0/address
2026-10-20 00:05:52,480 - util.py[DEBUG]: Reading from /sys/class/net/eth0/device/device (quiet=False)
2026-10-20 00:05:52,480 - util.py[DEBUG]: Reading 7 bytes from /sys/class/net/eth0/device/device
2026-10-20 00:05:52,480 - util.py[DEBUG]: Reading from /sys/class/net/lo/addr_assign_type (quiet=False)
2026-10-20 00:05:52,480 - util.py[DEBUG]: Reading 2 bytes from /sys/class/net/lo/addr_assign_type
2026-10-20 00:05:52,480 - util.py[DEBUG]: Reading from /sys/class/net/lo/uevent (quiet=False)
2026-10-20 00:05:52,480 - util.py[DEBUG]: Reading 23 bytes from /sys/class/net/lo/uevent
2026-10-20 00:05:52,480 - util.py[DEBUG]: Reading from /sys/class/net/lo/address (quiet=False)
2026-10-20 00:05:52,481 - util.py[DEBUG]: Reading 18 bytes from /sys/class/net/lo/address
2026-10-20 00:05:52,481 - util.py[DEBUG]: Reading from /sys/class/net/lo/device/device (quiet=False)
2026-10-20 00:05:52,481 - util.py[DEBUG]: Reading from /sys/class/net/docker0/addr_assign_type (quiet=False)
2026-10-20 00:05:52,481 - util.py[DEBUG]: Reading 2 bytes from /sys/class/net/docker0/addr_assign_type
2026-10-20 00:05:52,481 - util.py[DEBUG]: Reading from /sys/class/net/eth0/operstate (quiet=False)
2026-10-20 00:05:52,481 - util.py[DEBUG]: Reading 3 bytes from /sys/class/net/eth0/operstate
2026-10-20 00:05:52,481 - util.py[DEBUG]: Reading from /sys/class/net/lo/operstate (quiet=False)
2026-10-20 00:05:52,481 - util.py[DEBUG]: Reading 8 bytes from /sys/class/net/lo/operstate
2026-10-20 00:05:52,481 - subp.py[DEBUG]: Running command ['ip', '-6', 'addr', 'show', 'permanent', 'scope', 'global'] with allowed return codes [0] (shell=False, capture=True)
2026-10-20 00:05:52,485 - subp.py[DEBUG]: Running command ['ip', '-4', 'addr', 'show'] with allowed return codes [0] (shell=False, capture=True)
2026-10-20 00:05:52,489 - net[DEBUG]: Detected interfaces {'eth0': {'downable': False, 'device_id': '0x0001', 'driver': 'virtio_net', 'mac': '00:50:56:5e:95:7b', 'name': 'eth0', 'up': True}, 'lo': {'downable': False, 'device_id': None, 'driver': None, 'mac': '00:00:00:00:00:00', 'name': 'lo', 'up': True}}
2026-10-20 00:05:52,489 - net[DEBUG]: no work necessary for renaming of [['00:50:56:5e:95:7b', 'eth0', 'virtio_net', '0x0001']]
2026-10-20 00:05:52,489 - stages.py[INFO]: Applying network configuration from fallback bringup=True: {'ethernets': {'eth0': {'dhcp4': True, 'dhcp6': True, 'set-name': 'eth0', 'match': {'macaddress': '00:50:56:5e:95:7b'}}}, 'version': 2}
2026-10-20 00:05:52,489 - util.py[DEBUG]: Writing to /run/cloud-init/sem/apply_network_config.once - wb: [644] 23 bytes
2026-10-20 00:05:52,490 - distros[DEBUG]: Selected renderer 'netplan' from priority list: None
2026-10-20 00:05:52,490 - network_state.py[DEBUG]: Passthrough netplan v2 config
2026-10-20 00:05:52,491 - netplan.py[DEBUG]: V2 to V2 passthrough
2026-10-20 00:05:52,492 - util.py[DEBUG]: Reading from /etc/netplan/50-cloud-init.yaml (quiet=False)
2026-10-20 00:05:52,492 - util.py[DEBUG]: Reading 812 bytes from /etc/netplan/50-cloud-init.yaml
2026-10-20 00:05:52,492 - util.py[DEBUG]: Attempting to load yaml from string of length 812 with allowed root types (<class 'dict'>,)
2026-10-20 00:05:52,494 - util.py[DEBUG]: Attempting to load yaml from string of length 505 with allowed root types (<class 'dict'>,)
2026-10-20 00:05:52,496 - netplan.py[DEBUG]: Rendered netplan config using netplan python API
2026-10-20 00:05:52,496 - subp.py[DEBUG]: Running command ['netplan', 'generate'] with allowed return codes [0] (shell=False, capture=True)
2026-10-20 00:05:53,552 - performance.py[DEBUG]: Running ['netplan', 'generate'] took 1.056 seconds
2026-10-20 00:05:53,552 - subp.py[DEBUG]: Running command ['udevadm', 'test-builtin', 'net_setup_link', '/sys/class/net/eth0'] with allowed return codes [0] (shell=False, capture=True)
2026-10-20 00:05:53,574 - performance.py[DEBUG]: Running ['udevadm', 'test-builtin', 'net_setup_link', '/sys/class/net/eth0'] took 0.021 seconds
2026-10-20 00:05:53,575 - subp.py[DEBUG]: Running command ['udevadm', 'test-builtin', 'net_setup_link', '/sys/class/net/lo'] with allowed return codes [0] (shell=False, capture=True)
2026-10-20 00:05:53,590 - performance.py[DEBUG]: Running ['udevadm', 'test-builtin', 'net_setup_link', '/sys/class/net/lo'] took 0.016 seconds
2026-10-20 00:05:53,591 - subp.py[DEBUG]: Running command ['udevadm', 'test-builtin', 'net_setup_link', '/sys/class/net/docker0'] with allowed return codes [0] (shell=False, capture=True)
2026-10-20 00:05:53,604 - performance.py[DEBUG]: Running ['udevadm', 'test-builtin', 'net_setup_link', '/sys/class/net/docker0'] took 0.013 seconds
2026-10-20 00:05:53,604 - distros[DEBUG]: Bringing up newly configured network interfaces
2026-10-20 00:05:53,605 - activators.py[DEBUG]: Using selected activator: <class 'cloudinit.net.activators.NetplanActivator'> from priority: ['eni', 'netplan', 'network-manager', 'networkd', 'ifconfig']
2026-10-20 00:05:53,605 - subp.py[DEBUG]: Running command ['netplan', 'apply'] with allowed return codes [0] (shell=False, capture=True)
2026-10-20 00:05:54,683 - performance.py[DEBUG]: Running ['netplan', 'apply'] took 1.079 seconds
2026-10-20 00:05:54,683 - handlers.py[DEBUG]: start: init-network/setup-datasource: setting up datasource
2026-10-20 00:05:54,683 - handlers.py[DEBUG]: finish: init-network/setup-datasource: SUCCESS: setting up datasource
2026-10-20 00:05:54,684 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/iid-datasource-none/user-data.txt - wb: [600] 0 bytes
2026-10-20 00:05:54,686 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/iid-datasource-none/user-data.txt.i - wb: [600] 308 bytes
2026-10-20 00:05:54,687 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/iid-datasource-none/vendor-data.txt - wb: [600] 0 bytes
2026-10-20 00:05:54,688 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/iid-datasource-none/vendor-data.txt.i - wb: [600] 308 bytes
2026-10-20 00:05:54,688 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/iid-datasource-none/vendor-data2.txt - wb: [600] 0 bytes
2026-10-20 00:05:54,689 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/iid-datasource-none/vendor-data2.txt.i - wb: [600] 308 bytes
2026-10-20 00:05:54,690 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/iid-datasource-none/sem/consume_data - wb: [644] 24 bytes
2026-10-20 00:05:54,690 - helpers.py[DEBUG]: Running consume_data using lock (<FileLock using file '/var/lib/cloud/instances/iid-datasource-none/sem/consume_data'>)
2026-10-20 00:05:54,690 - handlers.py[DEBUG]: start: init-network/consume-user-data: reading and applying user-data
2026-10-20 00:05:54,691 - stages.py[DEBUG]: Added default handler for {'text/cloud-config', 'text/cloud-config-jsonp'} from CloudConfigPartHandler: [['text/cloud-config', 'text/cloud-config-jsonp']]
2026-10-20 00:05:54,691 - stages.py[DEBUG]: Added default handler for {'text/x-shellscript'} from ShellScriptPartHandler: [['text/x-shellscript']]
2026-10-20 00:05:54,691 - stages.py[DEBUG]: Added default handler for {'text/x-shellscript-per-boot'} from ShellScriptByFreqPartHandler: [['text/x-shellscript-per-boot']]
2026-10-20 00:05:54,691 - stages.py[DEBUG]: Added default handler for {'text/x-shellscript-per-instance'} from ShellScriptByFreqPartHandler: [['text/x-shellscript-per-instance']]
2026-10-20 00:05:54,691 - stages.py[DEBUG]: Added default handler for {'text/x-shellscript-per-once'} from ShellScriptByFreqPartHandler: [['text/x-shellscript-per-once']]
2026-10-20 00:05:54,691 - stages.py[DEBUG]: Added default handler for {'text/cloud-boothook'} from BootHookPartHandler: [['text/cloud-boothook']]
2026-10-20 00:05:54,691 - stages.py[DEBUG]: Added default handler for {'text/jinja2'} from JinjaTemplatePartHandler: [['text/jinja2']]
2026-10-20 00:05:54,691 - handlers[DEBUG]: Calling handler CloudConfigPartHandler: [['text/cloud-config', 'text/cloud-config-jsonp']] (__begin__, None, 3) with frequency once-per-instance
2026-10-20 00:05:54,691 - handlers[DEBUG]: Calling handler ShellScriptPartHandler: [['text/x-shellscript']] (__begin__, None, 2) with frequency once-per-instance
2026-10-20 00:05:54,691 - handlers[DEBUG]: Calling handler ShellScriptByFreqPartHandler: [['text/x-shellscript-per-boot']] (__begin__, None, 2) with frequency once-per-instance
2026-10-20 00:05:54,691 - handlers[DEBUG]: Calling handler ShellScriptByFreqPartHandler: [['text/x-shellscript-per-instance']] (__begin__, None, 2) with frequency once-per-instance
2026-10-20 00:05:54,691 - handlers[DEBUG]: Calling handler ShellScriptByFreqPartHandler: [['text/x-shellscript-per-once']] (__begin__, None, 2) with frequency once-per-instance
2026-10-20 00:05:54,691 - handlers[DEBUG]: Calling handler BootHookPartHandler: [['text/cloud-boothook']] (__begin__, None, 2) with frequency once-per-instance
2026-10-20 00:05:54,691 - handlers[DEBUG]: Calling handler JinjaTemplatePartHandler: [['text/jinja2']] (__begin__, None, 3) with frequency once-per-instance
2026-10-20 00:05:54,691 - handlers[DEBUG]: {'MIME-Version': '1.0', 'Content-Type': 'text/x-not-multipart', 'Content-Disposition': 'attachment; filename="part-001"'}
2026-10-20 00:05:54,691 - handlers[DEBUG]: Empty payload of type text/x-not-multipart
2026-10-20 00:05:54,691 - handlers[DEBUG]: Calling handler CloudConfigPartHandler: [['text/cloud-config', 'text/cloud-config-jsonp']] (__end__, None, 3) with frequency once-per-instance
2026-10-20 00:05:54,691 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/iid-datasource-none/cloud-config.txt - wb: [600] 0 bytes
2026-10-20 00:05:54,692 - handlers[DEBUG]: Calling handler ShellScriptPartHandler: [['text/x-shellscript']] (__end__, None, 2) with frequency once-per-instance
2026-10-20 00:05:54,692 - handlers[DEBUG]: Calling handler ShellScriptByFreqPartHandler: [['text/x-shellscript-per-boot']] (__end__, None, 2) with frequency once-per-instance
2026-10-20 00:05:54,692 - handlers[DEBUG]: Calling handler ShellScriptByFreqPartHandler: [['text/x-shellscript-per-instance']] (__end__, None, 2) with frequency once-per-instance
2026-10-20 00:05:54,692 - handlers[DEBUG]: Calling handler ShellScriptByFreqPartHandler: [['text/x-shellscript-per-once']] (__end__, None, 2) with frequency once-per-instance
2026-10-20 00:05:54,692 - handlers[DEBUG]: Calling handler BootHookPartHandler: [['text/cloud-boothook']] (__end__, None, 2) with frequency once-per-instance
2026-10-20 00:05:54,692 - handlers[DEBUG]: Calling handler JinjaTemplatePartHandler: [['text/jinja2']] (__end__, None, 3) with frequency once-per-instance
2026-10-20 00:05:54,692 - handlers.py[DEBUG]: finish: init-network/consume-user-data: SUCCESS: reading and applying user-data
2026-10-20 00:05:54,692 - handlers.py[DEBUG]: start: init-network/consume-vendor-data: reading and applying vendor-data
2026-10-20 00:05:54,692 - stages.py[DEBUG]: no vendordata from datasource
2026-10-20 00:05:54,692 - handlers.py[DEBUG]: finish: init-network/consume-vendor-data: SUCCESS: reading and applying vendor-data
2026-10-20 00:05:54,692 - handlers.py[DEBUG]: start: init-network/consume-vendor-data2: reading and applying vendor-data2
2026-10-20 00:05:54,692 - stages.py[DEBUG]: no vendordata2 from datasource
2026-10-20 00:05:54,692 - handlers.py[DEBUG]: finish: init-network/consume-vendor-data2: SUCCESS: reading and applying vendor-data2
2026-10-20 00:05:54,692 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg (quiet=False)
2026-10-20 00:05:54,692 - util.py[DEBUG]: Reading 2724 bytes from /etc/cloud/cloud.cfg
2026-10-20 00:05:54,693 - util.py[DEBUG]: Attempting to load yaml from string of length 2724 with allowed root types (<class 'dict'>,)
2026-10-20 00:05:54,698 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/99-ssh.cfg (quiet=False)
2026-10-20 00:05:54,698 - util.py[DEBUG]: Reading 48 bytes from /etc/cloud/cloud.cfg.d/99-ssh.cfg
2026-10-20 00:05:54,698 - util.py[DEBUG]: Attempting to load yaml from string of length 48 with allowed root types (<class 'dict'>,)
2026-10-20 00:05:54,698 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/05_logging.cfg (quiet=False)
2026-10-20 00:05:54,699 - util.py[DEBUG]: Reading 2071 bytes from /etc/cloud/cloud.cfg.d/05_logging.cfg
2026-10-20 00:05:54,699 - util.py[DEBUG]: Attempting to load yaml from string of length 2071 with allowed root types (<class 'dict'>,)
2026-10-20 00:05:54,700 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg (quiet=False)
2026-10-20 00:05:54,700 - util.py[DEBUG]: Reading 309 bytes from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg
2026-10-20 00:05:54,700 - util.py[DEBUG]: Attempting to load yaml from string of length 309 with allowed root types (<class 'dict'>,)
2026-10-20 00:05:54,702 - util.py[DEBUG]: Reading from /run/cloud-init/cloud.cfg (quiet=False)
2026-10-20 00:05:54,702 - util.py[DEBUG]: Reading 86 bytes from /run/cloud-init/cloud.cfg
2026-10-20 00:05:54,702 - util.py[DEBUG]: Attempting to load yaml from string of length 86 with allowed root types (<class 'dict'>,)
2026-10-20 00:05:54,702 - util.py[DEBUG]: Attempting to load yaml from string of length 0 with allowed root types (<class 'dict'>,)
2026-10-20 00:05:54,702 - util.py[DEBUG]: loaded blob returned None, returning default.
2026-10-20 00:05:54,702 - util.py[DEBUG]: Reading from /var/lib/cloud/instance/cloud-config.txt (quiet=False)
2026-10-20 00:05:54,702 - util.py[DEBUG]: Reading 0 bytes from /var/lib/cloud/instance/cloud-config.txt
2026-10-20 00:05:54,702 - util.py[DEBUG]: Attempting to load yaml from string of length 0 with allowed root types (<class 'dict'>,)
2026-10-20 00:05:54,702 - util.py[DEBUG]: loaded blob returned None, returning default.
2026-10-20 00:05:54,703 - atomic_helper.py[DEBUG]: Atomically writing to file /run/cloud-init/combined-cloud-config.json (via temporary file /run/cloud-init/tmpsb1px9q6) - w: [600] 4895 bytes/chars
2026-10-20 00:05:54,703 - util.py[DEBUG]: Reading from /run/cloud-init/instance-data-sensitive.json (quiet=False)
2026-10-20 00:05:54,703 - util.py[DEBUG]: Reading 12744 bytes from /run/cloud-init/instance-data-sensitive.json
2026-10-20 00:05:54,704 - atomic_helper.py[DEBUG]: Atomically writing to file /run/cloud-init/instance-data-sensitive.json (via temporary file /run/cloud-init/tmphsp9nm46) - w: [600] 13856 bytes/chars
2026-10-20 00:05:54,704 - main.py[DEBUG]: Skipping user-data validation. No user-data found.
2026-10-20 00:05:54,704 - util.py[DEBUG]: Reading from /var/lib/cloud/instance/cloud-config.txt (quiet=False)
2026-10-20 00:05:54,705 - util.py[DEBUG]: Reading 0 bytes from /var/lib/cloud/instance/cloud-config.txt
2026-10-20 00:05:54,705 - util.py[DEBUG]: Attempting to load yaml from string of length 0 with allowed root types (<class 'dict'>,)
2026-10-20 00:05:54,705 - util.py[DEBUG]: loaded blob returned None, returning default.
2026-10-20 00:05:54,708 - handlers.py[DEBUG]: start: init-network/activate-datasource: activating datasource
2026-10-20 00:05:54,709 - util.py[DEBUG]: Writing to /var/lib/cloud/instance/obj.pkl - wb: [400] 6795 bytes
2026-10-20 00:05:54,710 - handlers.py[DEBUG]: finish: init-network/activate-datasource: SUCCESS: activating datasource
2026-10-20 00:05:54,710 - util.py[DEBUG]: Writing to /var/lib/cloud/instance/warnings/dsid_missing_source - wb: [644] 1875 bytes
2026-10-20 00:05:54,710 - warnings.py[WARNING]: **************************************************************************
# A new feature in cloud-init identified possible datasources for        #
# this system as:                                                        #
#   []                                                                   #
# However, the datasource used was: None                                 #
#                                                                        #
# In the future, cloud-init will only attempt to use datasources that    #
# are identified or specifically configured.                             #
# For more information see                                               #
#   https://bugs.launchpad.net/bugs/1669675                              #
#                                                                        #
# If you are seeing this message, please file a bug against              #
# cloud-init at                                                          #
#    https://github.com/canonical/cloud-init/issues                      #
# Make sure to include the cloud provider your instance is               #
# running on.                                                            #
#                                                                        #
# After you have filed a bug, you can disable this warning by launching  #
# your instance with the cloud-config below, or putting that content     #
# into /etc/cloud/cloud.cfg.d/99-warnings.cfg                            #
#                                                                        #
# #cloud-config                                                          #
# warnings:                                                              #
#   dsid_missing_source: off                                             #
**************************************************************************

2026-10-20 00:05:54,726 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2026-10-20 00:05:54,727 - modules.py[INFO]: Skipping modules 'bootcmd,write-files,disk_setup,update_etc_hosts,ca-certs,rsyslog' because no applicable config is provided.
2026-10-20 00:05:54,727 - modules.py[DEBUG]: Running module seed_random (<module 'cloudinit.config.cc_seed_random' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_seed_random.py'>) with frequency once-per-instance
2026-10-20 00:05:54,728 - handlers.py[DEBUG]: start: init-network/config-seed_random: running config-seed_random with frequency once-per-instance
2026-10-20 00:05:54,728 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/iid-datasource-none/sem/config_seed_random - wb: [644] 24 bytes
2026-10-20 00:05:54,728 - helpers.py[DEBUG]: Running config-seed_random using lock (<FileLock using file '/var/lib/cloud/instances/iid-datasource-none/sem/config_seed_random'>)
2026-10-20 00:05:54,728 - cc_seed_random.py[DEBUG]: no command provided
2026-10-20 00:05:54,728 - handlers.py[DEBUG]: finish: init-network/config-seed_random: SUCCESS: config-seed_random ran successfully and took 0.001 seconds
2026-10-20 00:05:54,728 - modules.py[DEBUG]: Running module growpart (<module 'cloudinit.config.cc_growpart' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_growpart.py'>) with frequency always
2026-10-20 00:05:54,729 - handlers.py[DEBUG]: start: init-network/config-growpart: running config-growpart with frequency always
2026-10-20 00:05:54,729 - helpers.py[DEBUG]: Running config-growpart using lock (<cloudinit.helpers.DummyLock object at 0x7fe28714a7b0>)
2026-10-20 00:05:54,729 - cc_growpart.py[DEBUG]: No 'growpart' entry in cfg.  Using default: {'mode': 'auto', 'devices': ['/'], 'ignore_growroot_disabled': False}
2026-10-20 00:05:54,729 - subp.py[DEBUG]: Running command ['growpart', '--help'] with allowed return codes [0] (shell=False, capture=True)
2026-10-20 00:05:54,734 - util.py[DEBUG]: Reading from /proc/876/mountinfo (quiet=False)
2026-10-20 00:05:54,734 - util.py[DEBUG]: Reading 3100 bytes from /proc/876/mountinfo
2026-10-20 00:05:54,734 - cc_growpart.py[DEBUG]: growpart found fs=ext4
2026-10-20 00:05:54,735 - util.py[DEBUG]: Reading from /sys/class/block/sda1/partition (quiet=False)
2026-10-20 00:05:54,735 - util.py[DEBUG]: Reading 2 bytes from /sys/class/block/sda1/partition
2026-10-20 00:05:54,735 - util.py[DEBUG]: Reading from /sys/devices/pci0000:00/0000:00:05.0/virtio1/host0/target0:0:0/0:0:0:0/block/sda/dev (quiet=False)
2026-10-20 00:05:54,735 - util.py[DEBUG]: Reading 4 bytes from /sys/devices/pci0000:00/0000:00:05.0/virtio1/host0/target0:0:0/0:0:0:0/block/sda/dev
2026-10-20 00:05:54,735 - util.py[DEBUG]: Reading from /proc/876/mountinfo (quiet=False)
2026-10-20 00:05:54,735 - util.py[DEBUG]: Reading 3100 bytes from /proc/876/mountinfo
2026-10-20 00:05:54,735 - util.py[DEBUG]: Reading from /proc/876/mountinfo (quiet=False)
2026-10-20 00:05:54,736 - util.py[DEBUG]: Reading 3100 bytes from /proc/876/mountinfo
2026-10-20 00:05:54,736 - subp.py[DEBUG]: Running command ['growpart', '--dry-run', '/dev/sda', '1'] with allowed return codes [0] (shell=False, capture=True)
2026-10-20 00:05:54,829 - performance.py[DEBUG]: Running ['growpart', '--dry-run', '/dev/sda', '1'] took 0.092 seconds
2026-10-20 00:05:54,830 - performance.py[DEBUG]: Resizing devices took 0.096 seconds
2026-10-20 00:05:54,830 - cc_growpart.py[DEBUG]: '/' NOCHANGE: no change necessary (/dev/sda, 1)
2026-10-20 00:05:54,830 - handlers.py[DEBUG]: finish: init-network/config-growpart: SUCCESS: config-growpart ran successfully and took 0.101 seconds
2026-10-20 00:05:54,830 - modules.py[DEBUG]: Running module resizefs (<module 'cloudinit.config.cc_resizefs' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_resizefs.py'>) with frequency always
2026-10-20 00:05:54,830 - handlers.py[DEBUG]: start: init-network/config-resizefs: running config-resizefs with frequency always
2026-10-20 00:05:54,830 - helpers.py[DEBUG]: Running config-resizefs using lock (<cloudinit.helpers.DummyLock object at 0x7fe287002210>)
2026-10-20 00:05:54,830 - util.py[DEBUG]: Reading from /proc/876/mountinfo (quiet=False)
2026-10-20 00:05:54,830 - util.py[DEBUG]: Reading 3100 bytes from /proc/876/mountinfo
2026-10-20 00:05:54,830 - cc_resizefs.py[DEBUG]: resize_info: dev=/dev/sda1 mnt_point=/ path=/
2026-10-20 00:05:54,831 - cc_resizefs.py[DEBUG]: Resizing / (ext4) using resize2fs /dev/sda1
2026-10-20 00:05:54,831 - subp.py[DEBUG]: Running command ('resize2fs', '/dev/sda1') with allowed return codes [0] (shell=False, capture=True)
2026-10-20 00:05:54,856 - performance.py[DEBUG]: Running ('resize2fs', '/dev/sda1') took 0.025 seconds
2026-10-20 00:05:54,856 - cc_resizefs.py[DEBUG]: Resized root filesystem (type=ext4, val=True)
2026-10-20 00:05:54,856 - handlers.py[DEBUG]: finish: init-network/config-resizefs: SUCCESS: config-resizefs ran successfully and took 0.026 seconds
2026-10-20 00:05:54,856 - modules.py[DEBUG]: Running module mounts (<module 'cloudinit.config.cc_mounts' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_mounts.py'>) with frequency once-per-instance
2026-10-20 00:05:54,856 - handlers.py[DEBUG]: start: init-network/config-mounts: running config-mounts with frequency once-per-instance
2026-10-20 00:05:54,856 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/iid-datasource-none/sem/config_mounts - wb: [644] 24 bytes
2026-10-20 00:05:54,857 - helpers.py[DEBUG]: Running config-mounts using lock (<FileLock using file '/var/lib/cloud/instances/iid-datasource-none/sem/config_mounts'>)
2026-10-20 00:05:54,857 - cc_mounts.py[DEBUG]: mounts configuration is []
2026-10-20 00:05:54,857 - util.py[DEBUG]: Reading from /etc/fstab (quiet=False)
2026-10-20 00:05:54,857 - util.py[DEBUG]: Reading 177 bytes from /etc/fstab
2026-10-20 00:05:54,857 - cc_mounts.py[DEBUG]: Attempting to determine the real name of ephemeral0
2026-10-20 00:05:54,857 - cc_mounts.py[DEBUG]: changed ephemeral0 => None
2026-10-20 00:05:54,857 - cc_mounts.py[DEBUG]: Ignoring nonexistent default named mount ephemeral0
2026-10-20 00:05:54,857 - cc_mounts.py[DEBUG]: Attempting to determine the real name of swap
2026-10-20 00:05:54,857 - cc_mounts.py[DEBUG]: changed swap => None
2026-10-20 00:05:54,857 - cc_mounts.py[DEBUG]: Ignoring nonexistent default named mount swap
2026-10-20 00:05:54,857 - cc_mounts.py[DEBUG]: no need to setup swap
2026-10-20 00:05:54,857 - cc_mounts.py[DEBUG]: No modifications to fstab needed
2026-10-20 00:05:54,858 - handlers.py[DEBUG]: finish: init-network/config-mounts: SUCCESS: config-mounts ran successfully and took 0.001 seconds
2026-10-20 00:05:54,858 - modules.py[DEBUG]: Running module set_hostname (<module 'cloudinit.config.cc_set_hostname' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_set_hostname.py'>) with frequency once-per-instance
2026-10-20 00:05:54,858 - handlers.py[DEBUG]: start: init-network/config-set_hostname: running config-set_hostname with frequency once-per-instance
2026-10-20 00:05:54,858 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/iid-datasource-none/sem/config_set_hostname - wb: [644] 24 bytes
2026-10-20 00:05:54,859 - helpers.py[DEBUG]: Running config-set_hostname using lock (<FileLock using file '/var/lib/cloud/instances/iid-datasource-none/sem/config_set_hostname'>)
2026-10-20 00:05:54,859 - util.py[DEBUG]: Reading from /etc/hosts (quiet=False)
2026-10-20 00:05:54,859 - util.py[DEBUG]: Reading 565 bytes from /etc/hosts
2026-10-20 00:05:54,859 - util.py[DEBUG]: Reading from /etc/hosts (quiet=False)
2026-10-20 00:05:54,859 - util.py[DEBUG]: Reading 565 bytes from /etc/hosts
2026-10-20 00:05:54,859 - util.py[DEBUG]: Reading from /var/lib/cloud/data/set-hostname (quiet=False)
2026-10-20 00:05:54,859 - util.py[DEBUG]: Reading 71 bytes from /var/lib/cloud/data/set-hostname
2026-10-20 00:05:54,859 - cc_set_hostname.py[DEBUG]: Setting the hostname to NextCloudBackup (NextCloudBackup)
2026-10-20 00:05:54,859 - util.py[DEBUG]: Reading from /etc/hostname (quiet=False)
2026-10-20 00:05:54,859 - util.py[DEBUG]: Reading 16 bytes from /etc/hostname
2026-10-20 00:05:54,860 - util.py[DEBUG]: Writing to /etc/hostname - wb: [644] 16 bytes
2026-10-20 00:05:54,860 - distros[DEBUG]: Non-persistently setting the system hostname to NextCloudBackup
2026-10-20 00:05:54,860 - subp.py[DEBUG]: Running command ['hostname', 'NextCloudBackup'] with allowed return codes [0] (shell=False, capture=True)
2026-10-20 00:05:54,863 - atomic_helper.py[DEBUG]: Atomically writing to file /var/lib/cloud/data/set-hostname (via temporary file /var/lib/cloud/data/tmpm627762f) - w: [644] 63 bytes/chars
2026-10-20 00:05:54,864 - handlers.py[DEBUG]: finish: init-network/config-set_hostname: SUCCESS: config-set_hostname ran successfully and took 0.006 seconds
2026-10-20 00:05:54,864 - modules.py[DEBUG]: Running module update_hostname (<module 'cloudinit.config.cc_update_hostname' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_update_hostname.py'>) with frequency always
2026-10-20 00:05:54,864 - handlers.py[DEBUG]: start: init-network/config-update_hostname: running config-update_hostname with frequency always
2026-10-20 00:05:54,864 - helpers.py[DEBUG]: Running config-update_hostname using lock (<cloudinit.helpers.DummyLock object at 0x7fe287002850>)
2026-10-20 00:05:54,864 - util.py[DEBUG]: Reading from /etc/hosts (quiet=False)
2026-10-20 00:05:54,864 - util.py[DEBUG]: Reading 565 bytes from /etc/hosts
2026-10-20 00:05:54,864 - util.py[DEBUG]: Reading from /etc/hosts (quiet=False)
2026-10-20 00:05:54,864 - util.py[DEBUG]: Reading 565 bytes from /etc/hosts
2026-10-20 00:05:54,864 - cc_update_hostname.py[DEBUG]: Updating hostname to NextCloudBackup (NextCloudBackup)
2026-10-20 00:05:54,864 - util.py[DEBUG]: Reading from /var/lib/cloud/data/previous-hostname (quiet=False)
2026-10-20 00:05:54,865 - util.py[DEBUG]: Reading 11 bytes from /var/lib/cloud/data/previous-hostname
2026-10-20 00:05:54,865 - util.py[DEBUG]: Reading from /etc/hostname (quiet=False)
2026-10-20 00:05:54,865 - util.py[DEBUG]: Reading 16 bytes from /etc/hostname
2026-10-20 00:05:54,865 - distros[INFO]: /var/lib/cloud/data/previous-hostname differs from /etc/hostname, assuming user maintained hostname.
2026-10-20 00:05:54,865 - handlers.py[DEBUG]: finish: init-network/config-update_hostname: SUCCESS: config-update_hostname ran successfully and took 0.001 seconds
2026-10-20 00:05:54,865 - modules.py[DEBUG]: Running module users-groups (<module 'cloudinit.config.cc_users_groups' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_users_groups.py'>) with frequency once-per-instance
2026-10-20 00:05:54,865 - handlers.py[DEBUG]: start: init-network/config-users-groups: running config-users-groups with frequency once-per-instance
2026-10-20 00:05:54,865 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/iid-datasource-none/sem/config_users_groups - wb: [644] 24 bytes
2026-10-20 00:05:54,865 - helpers.py[DEBUG]: Running config-users-groups using lock (<FileLock using file '/var/lib/cloud/instances/iid-datasource-none/sem/config_users_groups'>)
2026-10-20 00:05:54,866 - util.py[DEBUG]: Reading from /etc/os-release (quiet=True)
2026-10-20 00:05:54,866 - util.py[DEBUG]: Reading 286 bytes from /etc/os-release
2026-10-20 00:05:54,866 - util.py[DEBUG]: Reading from /etc/system-image/channel.ini (quiet=True)
2026-10-20 00:05:54,866 - util.py[DEBUG]: Reading 0 bytes from /etc/system-image/channel.ini
2026-10-20 00:05:54,866 - distros[DEBUG]: Adding user debian
2026-10-20 00:05:54,866 - subp.py[DEBUG]: Running command ['useradd', 'debian', '--comment', 'Debian', '--groups', 'adm,audio,cdrom,dialout,dip,floppy,plugdev,sudo,video', '--shell', '/bin/bash', '-m'] with allowed return codes [0] (shell=False, capture=True)
2026-10-20 00:05:54,931 - performance.py[DEBUG]: Running ['useradd', 'debian', '--comment', 'Debian', '--groups', 'adm,audio,cdrom,dialout,dip,floppy,plugdev,sudo,video', '--shell', '/bin/bash', '-m'] took 0.064 seconds
2026-10-20 00:05:54,931 - subp.py[DEBUG]: Running command ['passwd', '-l', 'debian'] with allowed return codes [0] (shell=False, capture=True)
2026-10-20 00:05:54,957 - performance.py[DEBUG]: Running ['passwd', '-l', 'debian'] took 0.026 seconds
2026-10-20 00:05:54,957 - util.py[DEBUG]: Reading from /etc/sudoers (quiet=False)
2026-10-20 00:05:54,957 - util.py[DEBUG]: Reading 1714 bytes from /etc/sudoers
2026-10-20 00:05:54,958 - util.py[DEBUG]: Reading from /etc/sudoers.d/90-cloud-init-users (quiet=False)
2026-10-20 00:05:54,958 - util.py[DEBUG]: Reading 120 bytes from /etc/sudoers.d/90-cloud-init-users
2026-10-20 00:05:54,959 - util.py[DEBUG]: Writing to /etc/sudoers.d/90-cloud-init-users - ab: [None] 55 bytes
2026-10-20 00:05:54,959 - handlers.py[DEBUG]: finish: init-network/config-users-groups: SUCCESS: config-users-groups ran successfully and took 0.094 seconds
2026-10-20 00:05:54,959 - modules.py[DEBUG]: Running module ssh (<module 'cloudinit.config.cc_ssh' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_ssh.py'>) with frequency once-per-instance
2026-10-20 00:05:54,959 - handlers.py[DEBUG]: start: init-network/config-ssh: running config-ssh with frequency once-per-instance
2026-10-20 00:05:54,959 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/iid-datasource-none/sem/config_ssh - wb: [644] 23 bytes
2026-10-20 00:05:54,960 - helpers.py[DEBUG]: Running config-ssh using lock (<FileLock using file '/var/lib/cloud/instances/iid-datasource-none/sem/config_ssh'>)
2026-10-20 00:05:54,960 - util.py[DEBUG]: Reading from /proc/sys/crypto/fips_enabled (quiet=False)
2026-10-20 00:05:54,960 - util.py[DEBUG]: Reading 2 bytes from /proc/sys/crypto/fips_enabled
2026-10-20 00:05:54,960 - util.py[DEBUG]: Reading from /etc/ssh/ssh_host_ed25519_key.pub (quiet=False)
2026-10-20 00:05:54,960 - util.py[DEBUG]: Reading 97 bytes from /etc/ssh/ssh_host_ed25519_key.pub
2026-10-20 00:05:54,960 - util.py[DEBUG]: Reading from /etc/ssh/ssh_host_dsa_key.pub (quiet=False)
2026-10-20 00:05:54,960 - util.py[DEBUG]: Reading 605 bytes from /etc/ssh/ssh_host_dsa_key.pub
2026-10-20 00:05:54,961 - util.py[DEBUG]: Reading from /etc/ssh/ssh_host_rsa_key.pub (quiet=False)
2026-10-20 00:05:54,961 - util.py[DEBUG]: Reading 569 bytes from /etc/ssh/ssh_host_rsa_key.pub
2026-10-20 00:05:54,961 - util.py[DEBUG]: Reading from /etc/ssh/ssh_host_ecdsa_key.pub (quiet=False)
2026-10-20 00:05:54,961 - util.py[DEBUG]: Reading 177 bytes from /etc/ssh/ssh_host_ecdsa_key.pub
2026-10-20 00:05:54,961 - util.py[DEBUG]: Reading from /etc/ssh/sshd_config (quiet=False)
2026-10-20 00:05:54,961 - util.py[DEBUG]: Reading 3230 bytes from /etc/ssh/sshd_config
2026-10-20 00:05:54,962 - util.py[DEBUG]: Changing the ownership of /home/debian/.ssh to 1012:1012
2026-10-20 00:05:54,962 - util.py[DEBUG]: Writing to /home/debian/.ssh/authorized_keys - wb: [600] 0 bytes
2026-10-20 00:05:54,962 - util.py[DEBUG]: Changing the ownership of /home/debian/.ssh/authorized_keys to 1012:1012
2026-10-20 00:05:54,962 - util.py[DEBUG]: Reading from /home/debian/.ssh/authorized_keys (quiet=False)
2026-10-20 00:05:54,962 - util.py[DEBUG]: Reading 0 bytes from /home/debian/.ssh/authorized_keys
2026-10-20 00:05:54,962 - util.py[DEBUG]: Writing to /home/debian/.ssh/authorized_keys - wb: [600] 0 bytes
2026-10-20 00:05:54,963 - util.py[DEBUG]: Reading from /etc/ssh/sshd_config (quiet=False)
2026-10-20 00:05:54,963 - util.py[DEBUG]: Reading 3230 bytes from /etc/ssh/sshd_config
2026-10-20 00:05:54,965 - util.py[DEBUG]: Reading from /root/.ssh/authorized_keys (quiet=False)
2026-10-20 00:05:54,965 - util.py[DEBUG]: Reading 385 bytes from /root/.ssh/authorized_keys
2026-10-20 00:05:54,966 - util.py[DEBUG]: Writing to /root/.ssh/authorized_keys - wb: [700] 385 bytes
2026-10-20 00:05:54,966 - handlers.py[DEBUG]: finish: init-network/config-ssh: SUCCESS: config-ssh ran successfully and took 0.007 seconds
2026-10-20 00:05:54,966 - main.py[DEBUG]: Ran 8 modules with 0 failures
2026-10-20 00:05:54,966 - util.py[DEBUG]: Reading from /proc/uptime (quiet=False)
2026-10-20 00:05:54,966 - util.py[DEBUG]: Reading 15 bytes from /proc/uptime
2026-10-20 00:05:54,967 - performance.py[DEBUG]: cloud-init stage: 'init-network' took 361.381 seconds
2026-10-20 00:05:54,967 - handlers.py[DEBUG]: finish: init-network: FAIL: searching for network datasources

./old-debian12/boot/grub/grub.cfg

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

serial --speed=115200
terminal_input console serial
terminal_output console serial
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=0
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=cyan/blue
set menu_color_highlight=white/blue
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
}
set linux_gfx_mode=
export linux_gfx_mode
menuentry 'Debian GNU/Linux' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-f5b59259-3f9f-4129-bdf5-4503c42a19a8' {
	load_video
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1  f5b59259-3f9f-4129-bdf5-4503c42a19a8
	else
	  search --no-floppy --fs-uuid --set=root f5b59259-3f9f-4129-bdf5-4503c42a19a8
	fi
	echo	'Loading Linux 6.1.0-53-cloud-amd64 ...'
	linux	/boot/vmlinuz-6.1.0-53-cloud-amd64 root=PARTUUID=ee829b50-dbb1-4461-a46b-5fc08bfe425d ro console=tty0 console=ttyS0,115200 earlyprintk=ttyS0,115200 consoleblank=0 
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initrd.img-6.1.0-53-cloud-amd64
}
submenu 'Advanced options for Debian GNU/Linux' $menuentry_id_option 'gnulinux-advanced-f5b59259-3f9f-4129-bdf5-4503c42a19a8' {
	menuentry 'Debian GNU/Linux, with Linux 6.1.0-53-cloud-amd64' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-6.1.0-53-cloud-amd64-advanced-f5b59259-3f9f-4129-bdf5-4503c42a19a8' {
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1  f5b59259-3f9f-4129-bdf5-4503c42a19a8
		else
		  search --no-floppy --fs-uuid --set=root f5b59259-3f9f-4129-bdf5-4503c42a19a8
		fi
		echo	'Loading Linux 6.1.0-53-cloud-amd64 ...'
		linux	/boot/vmlinuz-6.1.0-53-cloud-amd64 root=PARTUUID=ee829b50-dbb1-4461-a46b-5fc08bfe425d ro console=tty0 console=ttyS0,115200 earlyprintk=ttyS0,115200 consoleblank=0 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-6.1.0-53-cloud-amd64
	}
	menuentry 'Debian GNU/Linux, with Linux 6.1.0-53-cloud-amd64 (recovery mode)' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-6.1.0-53-cloud-amd64-recovery-f5b59259-3f9f-4129-bdf5-4503c42a19a8' {
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1  f5b59259-3f9f-4129-bdf5-4503c42a19a8
		else
		  search --no-floppy --fs-uuid --set=root f5b59259-3f9f-4129-bdf5-4503c42a19a8
		fi
		echo	'Loading Linux 6.1.0-53-cloud-amd64 ...'
		linux	/boot/vmlinuz-6.1.0-53-cloud-amd64 root=PARTUUID=ee829b50-dbb1-4461-a46b-5fc08bfe425d ro single console=tty0 console=ttyS0,115200 earlyprintk=ttyS0,115200 consoleblank=0
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-6.1.0-53-cloud-amd64
	}
	menuentry 'Debian GNU/Linux, with Linux 6.1.0-52-cloud-amd64' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-6.1.0-52-cloud-amd64-advanced-f5b59259-3f9f-4129-bdf5-4503c42a19a8' {
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1  f5b59259-3f9f-4129-bdf5-4503c42a19a8
		else
		  search --no-floppy --fs-uuid --set=root f5b59259-3f9f-4129-bdf5-4503c42a19a8
		fi
		echo	'Loading Linux 6.1.0-52-cloud-amd64 ...'
		linux	/boot/vmlinuz-6.1.0-52-cloud-amd64 root=PARTUUID=ee829b50-dbb1-4461-a46b-5fc08bfe425d ro console=tty0 console=ttyS0,115200 earlyprintk=ttyS0,115200 consoleblank=0 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-6.1.0-52-cloud-amd64
	}
	menuentry 'Debian GNU/Linux, with Linux 6.1.0-52-cloud-amd64 (recovery mode)' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-6.1.0-52-cloud-amd64-recovery-f5b59259-3f9f-4129-bdf5-4503c42a19a8' {
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1  f5b59259-3f9f-4129-bdf5-4503c42a19a8
		else
		  search --no-floppy --fs-uuid --set=root f5b59259-3f9f-4129-bdf5-4503c42a19a8
		fi
		echo	'Loading Linux 6.1.0-52-cloud-amd64 ...'
		linux	/boot/vmlinuz-6.1.0-52-cloud-amd64 root=PARTUUID=ee829b50-dbb1-4461-a46b-5fc08bfe425d ro single console=tty0 console=ttyS0,115200 earlyprintk=ttyS0,115200 consoleblank=0
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-6.1.0-52-cloud-amd64
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg
fi
### END /etc/grub.d/41_custom ###

./old-debian12/boot/grub/grubenv

# GRUB Environment Block
# WARNING: Do not edit this file by tools other than grub-editenv!!!
##################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################

./old-debian12/boot/grub/i386-pc/command.lst

*acpi: acpi
*all_functional_test: functional_test
*background_image: gfxterm_background
*cat: cat
*cpuid: cpuid
*crc: hashsum
*cryptomount: cryptodisk
*drivemap: drivemap
*echo: echo
*extract_syslinux_entries_configfile: syslinuxcfg
*extract_syslinux_entries_source: syslinuxcfg
*file: file
*functional_test: functional_test
*gettext: gettext
*halt: halt
*hashsum: hashsum
*hdparm: hdparm
*hello: hello
*help: help
*hexdump: hexdump
*inb: iorw
*inl: iorw
*inw: iorw
*keystatus: keystatus
*kfreebsd: bsd
*knetbsd: bsd
*kopenbsd: bsd
*list_env: loadenv
*load_env: loadenv
*loopback: loopback
*ls: ls
*lsacpi: lsacpi
*lspci: lspci
*md5sum: hashsum
*menuentry: normal
*pcidump: pcidump
*plan9: plan9
*probe: probe
*rdmsr: rdmsr
*read_byte: memrw
*read_dword: memrw
*read_word: memrw
*regexp: regexp
*save_env: loadenv
*search: search
*sendkey: sendkey
*serial: serial
*setpci: setpci
*sha1sum: hashsum
*sha256sum: hashsum
*sha512sum: hashsum
*sleep: sleep
*smbios: smbios
*submenu: normal
*syslinux_configfile: syslinuxcfg
*syslinux_source: syslinuxcfg
*terminfo: terminfo
*test_blockarg: test_blockarg
*testspeed: testspeed
*tr: tr
*trust: pgp
*verify_detached: pgp
*xnu_splash: xnu
*zfskey: zfscrypt
.: configfile
915resolution: 915resolution
[: test
authenticate: normal
background_color: gfxterm_background
backtrace: backtrace
badram: mmap
blocklist: blocklist
boot: boot
break: normal
cat: minicmd
cbmemc: cbmemc
chainloader: chain
clear: normal
cmosclean: cmostest
cmosdump: cmosdump
cmosset: cmostest
cmostest: cmostest
cmp: cmp
configfile: configfile
continue: normal
coreboot_boottime: cbtime
cutmem: mmap
date: date
distrust: pgp
dump: minicmd
efiemu_loadcore: efiemu
efiemu_prepare: efiemu
efiemu_unload: efiemu
eval: eval
exit: minicmd
export: normal
extract_entries_configfile: configfile
extract_entries_source: configfile
extract_legacy_entries_configfile: legacycfg
extract_legacy_entries_source: legacycfg
false: true
freedos: freedos
gdbstub: gdb
gdbstub_break: gdb
gdbstub_stop: gdb
gptsync: gptsync
help: minicmd
hexdump_random: random
hwmatch: hwmatch
initrd16: linux16
initrd: linux
keymap: keylayouts
kfreebsd_loadenv: bsd
kfreebsd_module: bsd
kfreebsd_module_elf: bsd
knetbsd_module: bsd
knetbsd_module_elf: bsd
kopenbsd_ramdisk: bsd
legacy_check_password: legacycfg
legacy_configfile: legacycfg
legacy_initrd: legacycfg
legacy_initrd_nounzip: legacycfg
legacy_kernel: legacycfg
legacy_password: legacycfg
legacy_source: legacycfg
linux16: linux16
linux: linux
list_trusted: pgp
loadfont: font
lsapm: lsapm
lscoreboot: cbls
lsfonts: font
lsmmap: lsmmap
lsmod: minicmd
macppcbless: macbless
mactelbless: macbless
module2: multiboot2
module: multiboot
multiboot2: multiboot2
multiboot: multiboot
nativedisk: nativedisk
net_add_addr: net
net_add_dns: net
net_add_route: net
net_bootp6: net
net_bootp: net
net_del_addr: net
net_del_dns: net
net_del_route: net
net_dhcp: net
net_get_dhcp_option: net
net_ipv6_autoconf: net
net_ls_addr: net
net_ls_cards: net
net_ls_dns: net
net_ls_routes: net
net_nslookup: net
normal: normal
normal_exit: normal
ntldr: ntldr
outb: iorw
outl: iorw
outw: iorw
parttool: parttool
password: password
password_pbkdf2: password_pbkdf2
play: play
pxechainloader: pxechain
read: read
reboot: reboot
return: normal
rmmod: minicmd
search.file: search_fs_file
search.fs_label: search_label
search.fs_uuid: search_fs_uuid
setparams: normal
shift: normal
source: configfile
terminal_input: terminal
terminal_output: terminal
test: test
testload: testload
time: time
true: true
truecrypt: truecrypt
usb: usbtest
vbeinfo: videoinfo
vbetest: videotest
videoinfo: videoinfo
videotest: videotest
write_byte: memrw
write_dword: memrw
write_word: memrw
wrmsr: wrmsr
xnu_devprop_load: xnu
xnu_kernel64: xnu
xnu_kernel: xnu
xnu_kext: xnu
xnu_kextdir: xnu
xnu_mkext: xnu
xnu_ramdisk: xnu
xnu_resume: xnu
xnu_uuid: xnu_uuid
zfs-bootfs: zfsinfo
zfsinfo: zfsinfo

./old-debian12/boot/grub/i386-pc/crypto.lst

RIJNDAEL: gcry_rijndael
RIJNDAEL192: gcry_rijndael
RIJNDAEL256: gcry_rijndael
AES128: gcry_rijndael
AES-128: gcry_rijndael
AES-192: gcry_rijndael
AES-256: gcry_rijndael
ADLER32: adler32
CRC64: crc64
ARCFOUR: gcry_arcfour
BLOWFISH: gcry_blowfish
CAMELLIA128: gcry_camellia
CAMELLIA192: gcry_camellia
CAMELLIA256: gcry_camellia
CAST5: gcry_cast5
CRC32: gcry_crc
CRC32RFC1510: gcry_crc
CRC24RFC2440: gcry_crc
DES: gcry_des
3DES: gcry_des
DSA: gcry_dsa
IDEA: gcry_idea
MD4: gcry_md4
MD5: gcry_md5
RFC2268_40: gcry_rfc2268
AES: gcry_rijndael
AES192: gcry_rijndael
AES256: gcry_rijndael
RIPEMD160: gcry_rmd160
RSA: gcry_rsa
SEED: gcry_seed
SERPENT128: gcry_serpent
SERPENT192: gcry_serpent
SERPENT256: gcry_serpent
SHA1: gcry_sha1
SHA224: gcry_sha256
SHA256: gcry_sha256
SHA512: gcry_sha512
SHA384: gcry_sha512
TIGER192: gcry_tiger
TIGER: gcry_tiger
TIGER2: gcry_tiger
TWOFISH: gcry_twofish
TWOFISH128: gcry_twofish
WHIRLPOOL: gcry_whirlpool

./old-debian12/boot/grub/i386-pc/fs.lst

affs
afs
bfs
btrfs
cbfs
cpio
cpio_be
exfat
ext2
f2fs
fat
hfs
hfsplus
iso9660
jfs
minix
minix2
minix2_be
minix3
minix3_be
minix_be
newc
nilfs2
ntfs
odc
procfs
reiserfs
romfs
sfs
squash4
tar
udf
ufs1
ufs1_be
ufs2
xfs
zfs

./old-debian12/boot/grub/i386-pc/moddep.lst

xfs: fshelp
fshelp:
videotest_checksum: video_fb font functional_test
relocator: mmap
procfs: archelp
offsetio:
gcry_seed: crypto
ufs2:
tr: extcmd
lsacpi: extcmd acpi
json:
gfxterm_background: extcmd gfxterm bitmap video video_colors bitmap_scale
file: offsetio extcmd elf macho
xnu_uuid: gcry_md5
part_sunpc:
lsapm:
extcmd:
echo: extcmd
btrfs: gzio lzopio raid6rec zstd
read:
priority_queue:
gcry_dsa: mpi pgp
ctz_test: functional_test
cbls: cbtable
zfs: gzio
progress: normal
minix:
setjmp:
macbless: disk
hfspluscomp: gzio hfsplus
gcry_rsa: mpi pgp
cat: extcmd
videotest: font video gfxmenu
sleep: extcmd normal
reiserfs: fshelp
lspci: extcmd pci
div:
video_cirrus: video_fb video pci
testload:
search_fs_uuid:
part_dvh:
gcry_md5: crypto
gcry_arcfour: crypto
ufs1_be:
part_acorn:
iorw: extcmd
gfxterm: font video
cpio_be: archelp
scsi:
memdisk:
crc64: crypto
ata: scsi
multiboot2: relocator lsapm boot net acpi linux video mmap vbe
gcry_idea: crypto
cpuid: extcmd
cmp_test: functional_test
video_fb:
sfs: fshelp
zfscrypt: extcmd zfs crypto pbkdf2 gcry_rijndael gcry_sha1
video_bochs: video_fb video pci
udf: fshelp
datehook: datetime
adler32: crypto
setjmp_test: setjmp functional_test
ntfscomp: ntfs
nativedisk:
freedos: relocator boot chain video
eval: normal
videoinfo: video
verifiers:
pbkdf2: crypto
password_pbkdf2: crypto pbkdf2 normal gcry_sha512
font: bufio video
datetime:
crypto:
vga: video_fb video
strtoull_test: functional_test
pcidump: extcmd pci
mdraid09_be: diskfilter
afsplitter: crypto
normal: extcmd verifiers datetime crypto boot net bufio gettext terminal
efiemu: cpuid crypto acpi gcry_crc smbios
tftp: net
gcry_whirlpool: crypto
fat: fshelp
setpci: extcmd pci
boot:
ufs1:
cpio: archelp
chain: relocator boot video
cbmemc: normal terminfo cbtable
tga: bufio bitmap
spkmodem: terminfo
odc: archelp
drivemap: extcmd boot mmap
usbserial_pl2303: usb serial usbserial_common
regexp: extcmd normal
password: crypto normal
ntfs: fshelp
net: priority_queue datetime boot bufio
loadenv: extcmd disk
gzio: gcry_crc
ehci: boot cs5536 usb pci
archelp:
kernel:
usbtest: usb
pxechain: relocator boot video pxe
gptsync: disk
date: datetime
xnu: relocator extcmd verifiers efiemu boot random bitmap video mmap bitmap_scale macho
mul_test: functional_test
bufio:
acpi: extcmd mmap
cmostest:
png: bufio bitmap
minix2:
cs5536: pci
linux: relocator verifiers normal boot video mmap vbe
gcry_des: crypto
gcry_blowfish: crypto
part_plan:
part_bsd: part_msdos
lvm: diskfilter
gcry_tiger: crypto
blocklist:
xzio: crypto
usb_keyboard: usb keylayouts
nilfs2: fshelp
lsmmap:
gcry_cast5: crypto
backtrace:
testspeed: extcmd normal
squash4: fshelp gzio xzio lzopio
msdospart: disk parttool
lzopio: crypto
gfxterm_menu: procfs video_fb font normal functional_test
gcry_sha256: crypto
vga_text:
usb: pci
pata: ata pci
hwmatch: normal regexp pci
affs: fshelp
syslinuxcfg: extcmd normal
random: acpi hexdump
part_amiga:
play:
part_apple:
mpi: crypto
keylayouts:
jpeg: bufio bitmap
gcry_rmd160: crypto
cbfs: archelp
time:
loopback: extcmd
disk:
at_keyboard: boot keylayouts
true:
test:
part_sun:
part_msdos:
morse:
http: net
part_gpt:
luks2: json crypto pbkdf2 afsplitter cryptodisk
elf:
diskfilter:
bitmap:
mda_text:
cmp:
uhci: usb pci
ls: extcmd datetime normal
search: extcmd search_fs_uuid search_fs_file search_label
raid6rec: diskfilter
minix3_be:
memrw: extcmd
cbtime: cbtable
zstd:
raid5rec: diskfilter
rdmsr: extcmd
hello: extcmd
video:
shift_test: functional_test
minix2_be:
hashsum: extcmd crypto normal
gdb: backtrace serial
video_colors:
mdraid1x: diskfilter
gcry_twofish: crypto
gcry_sha512: crypto
cryptodisk: procfs extcmd crypto
parttool: normal
ohci: boot cs5536 usb pci
mmap: boot
minix3:
gfxmenu: gfxterm font normal bitmap video video_colors bitmap_scale trig
dm_nv: diskfilter
search_fs_file:
pxe: boot net
luks: crypto pbkdf2 afsplitter cryptodisk
ldm: part_msdos part_gpt diskfilter
hfsplus: fshelp
hfs: fshelp
hexdump: extcmd
gettext:
gcry_rijndael: crypto
aout:
terminal:
probe: extcmd
plan9: relocator extcmd verifiers boot video
functional_test: extcmd btrfs video_fb video
minicmd:
geli: crypto pbkdf2 gcry_sha256 cryptodisk gcry_sha512
gcry_rfc2268: crypto
f2fs: fshelp
ext2: fshelp
bsd: relocator extcmd gcry_md5 cpuid crypto verifiers boot elf video mmap aout serial vbe
terminfo: extcmd
legacy_password_test: functional_test legacycfg
gcry_crc: crypto
gcry_camellia: crypto
bitmap_scale: bitmap
biosdisk:
part_dfly:
cbtable:
usbms: scsi usb
sleep_test: datetime functional_test
div_test: div functional_test
zfsinfo: zfs
wrmsr:
sendkey: extcmd boot
newc: archelp
multiboot: relocator lsapm boot net linux video mmap vbe
linux16: relocator boot linux video mmap
keystatus: extcmd
jfs:
gcry_md4: crypto
pci:
mdraid09: diskfilter
iso9660: fshelp
cmdline_cat_test: procfs video_fb font normal functional_test
bswap_test: functional_test
afs: fshelp
search_label:
reboot: relocator
pgp: extcmd verifiers crypto mpi gcry_sha1
xnu_uuid_test: functional_test
test_blockarg: extcmd normal
serial: extcmd terminfo
configfile: normal
cmosdump:
romfs: fshelp
minix_be:
help: extcmd normal
halt: extcmd acpi
gcry_sha1: crypto
usbserial_usbdebug: usb serial usbserial_common
usbserial_ftdi: usb serial usbserial_common
hdparm: extcmd hexdump
trig:
vbe: video_fb video
tar: archelp
legacycfg: gcry_md5 crypto normal password linux
ahci: ata boot pci
915resolution:
pbkdf2_test: pbkdf2 functional_test gcry_sha1
macho:
smbios: extcmd acpi
signature_test: procfs functional_test
gcry_serpent: crypto
bfs: fshelp
usbserial_common: usb serial
truecrypt: relocator boot gzio video mmap
ntldr: relocator boot chain video
exfctest: functional_test
exfat: fshelp
all_video: vbe vga video_bochs video_cirrus

./old-debian12/boot/grub/i386-pc/modinfo.sh

#!/bin/bash

# User-controllable options
grub_modinfo_target_cpu=i386
grub_modinfo_platform=pc
grub_disk_cache_stats=0
grub_boot_time_stats=0
grub_have_font_source=1

# Autodetected config
grub_have_asm_uscore=0
grub_bss_start_symbol="__bss_start"
grub_end_symbol="end"

# Build environment
grub_target_cc='gcc-12'
grub_target_cc_version='gcc-12 (Debian 12.2.0-14+deb12u1) 12.2.0'
grub_target_cflags='-std=gnu99 -Os -m32 -Wall -W -Wshadow -Wpointer-arith -Wundef -Wchar-subscripts -Wcomment -Wdeprecated-declarations -Wdisabled-optimization -Wdiv-by-zero -Wfloat-equal -Wformat-extra-args -Wformat-security -Wformat-y2k -Wimplicit -Wimplicit-function-declaration -Wimplicit-int -Wmain -Wmissing-braces -Wmissing-format-attribute -Wmultichar -Wparentheses -Wreturn-type -Wsequence-point -Wshadow -Wsign-compare -Wswitch -Wtrigraphs -Wunknown-pragmas -Wunused -Wunused-function -Wunused-label -Wunused-parameter -Wunused-value  -Wunused-variable -Wwrite-strings -Wnested-externs -Wstrict-prototypes -g -Wredundant-decls -Wmissing-prototypes -Wmissing-declarations  -Wextra -Wattributes -Wendif-labels -Winit-self -Wint-to-pointer-cast -Winvalid-pch -Wmissing-field-initializers -Wnonnull -Woverflow -Wvla -Wpointer-to-int-cast -Wstrict-aliasing -Wvariadic-macros -Wvolatile-register-var -Wpointer-sign -Wmissing-include-dirs -Wmissing-prototypes -Wmissing-declarations -Wformat=2 -march=i386 -mrtd -mregparm=3 -falign-jumps=1 -falign-loops=1 -falign-functions=1 -freg-struct-return -mno-mmx -mno-sse -mno-sse2 -mno-sse3 -mno-3dnow -msoft-float -fno-dwarf2-cfi-asm -mno-stack-arg-probe -fno-asynchronous-unwind-tables -fno-unwind-tables -fno-ident -fno-PIE -fno-pie -fno-stack-protector -Wtrampolines -Werror'
grub_target_cppflags='-Wno-unused-but-set-variable -Wall -W  -DGRUB_MACHINE_PCBIOS=1 -DGRUB_MACHINE=I386_PC -m32 -nostdinc -isystem /usr/lib/gcc/x86_64-linux-gnu/12/include -I$(top_srcdir)/include -I$(top_builddir)/include'
grub_target_ccasflags=' -m32 -g  -msoft-float -fno-PIE -fno-pie'
grub_target_ldflags='-no-pie -m32 -Wl,-melf_i386 -no-pie -Wl,--build-id=none'
grub_cflags=''
grub_cppflags=' -D_FILE_OFFSET_BITS=64'
grub_ccasflags=''
grub_ldflags=''
grub_target_strip='strip'
grub_target_nm='nm'
grub_target_ranlib='ranlib'
grub_target_objconf=''
grub_target_obj2elf=''
grub_target_img_base_ldopt='-Wl,-Ttext'
grub_target_img_ldflags='@TARGET_IMG_BASE_LDFLAGS@'

# Version
grub_version="2.06"
grub_package="grub"
grub_package_string="GRUB 2.06-13+deb12u2"
grub_package_version="2.06-13+deb12u2"
grub_package_name="GRUB"
grub_package_bugreport="bug-grub@gnu.org"

./old-debian12/boot/grub/i386-pc/partmap.lst

part_acorn
part_amiga
part_apple
part_bsd
part_dfly
part_dvh
part_gpt
part_msdos
part_plan
part_sun
part_sunpc

./old-debian12/boot/grub/i386-pc/parttool.lst

msdos: msdospart

./old-debian12/boot/grub/i386-pc/terminal.lst

iat_keyboard: at_keyboard
iserial: serial
iserial_*: serial
oaudio: morse
ocbmemc: cbmemc
ogfxterm: gfxterm
omda_text: mda_text
oserial: serial
oserial_*: serial
ospkmodem: spkmodem
ovga_text: vga_text

./old-debian12/boot/grub/i386-pc/video.lst

vbe
vga
video_bochs
video_cirrus

./old-debian12/boot/grub/x86_64-efi/command.lst

*acpi: acpi
*all_functional_test: functional_test
*background_image: gfxterm_background
*cat: cat
*cpuid: cpuid
*crc: hashsum
*cryptomount: cryptodisk
*echo: echo
*extract_syslinux_entries_configfile: syslinuxcfg
*extract_syslinux_entries_source: syslinuxcfg
*file: file
*functional_test: functional_test
*gettext: gettext
*hashsum: hashsum
*hdparm: hdparm
*hello: hello
*help: help
*hexdump: hexdump
*inb: iorw
*inl: iorw
*inw: iorw
*keystatus: keystatus
*kfreebsd: bsd
*knetbsd: bsd
*kopenbsd: bsd
*list_env: loadenv
*load_env: loadenv
*loopback: loopback
*ls: ls
*lsacpi: lsacpi
*lspci: lspci
*md5sum: hashsum
*menuentry: normal
*pcidump: pcidump
*probe: probe
*rdmsr: rdmsr
*read_byte: memrw
*read_dword: memrw
*read_word: memrw
*regexp: regexp
*save_env: loadenv
*search: search
*serial: serial
*setpci: setpci
*sha1sum: hashsum
*sha256sum: hashsum
*sha512sum: hashsum
*sleep: sleep
*smbios: smbios
*submenu: normal
*syslinux_configfile: syslinuxcfg
*syslinux_source: syslinuxcfg
*terminfo: terminfo
*test_blockarg: test_blockarg
*testspeed: testspeed
*tr: tr
*trust: pgp
*verify_detached: pgp
*xnu_splash: xnu
*zfskey: zfscrypt
.: configfile
[: test
appleloader: appleldr
authenticate: normal
background_color: gfxterm_background
backtrace: backtrace
badram: mmap
blocklist: blocklist
boot: boot
break: normal
cat: minicmd
cbmemc: cbmemc
chainloader: chain
clear: normal
cmp: cmp
configfile: configfile
continue: normal
coreboot_boottime: cbtime
cutmem: mmap
date: date
distrust: pgp
dump: minicmd
eval: eval
exit: minicmd
export: normal
extract_entries_configfile: configfile
extract_entries_source: configfile
extract_legacy_entries_configfile: legacycfg
extract_legacy_entries_source: legacycfg
fakebios: loadbios
false: true
fix_video: fixvideo
fwsetup: efifwsetup
gptsync: gptsync
halt: halt
help: minicmd
hexdump_random: random
initrd16: linux16
initrd: linux
initrdefi: linuxefi
keymap: keylayouts
kfreebsd_loadenv: bsd
kfreebsd_module: bsd
kfreebsd_module_elf: bsd
knetbsd_module: bsd
knetbsd_module_elf: bsd
kopenbsd_ramdisk: bsd
legacy_check_password: legacycfg
legacy_configfile: legacycfg
legacy_initrd: legacycfg
legacy_initrd_nounzip: legacycfg
legacy_kernel: legacycfg
legacy_password: legacycfg
legacy_source: legacycfg
linux16: linux16
linux: linux
linuxefi: linuxefi
list_trusted: pgp
loadbios: loadbios
loadfont: font
lscoreboot: cbls
lsefi: lsefi
lsefimmap: lsefimmap
lsefisystab: lsefisystab
lsfonts: font
lsmmap: lsmmap
lsmod: minicmd
lssal: lssal
macppcbless: macbless
mactelbless: macbless
module2: multiboot2
module: multiboot
multiboot2: multiboot2
multiboot: multiboot
nativedisk: nativedisk
net_add_addr: net
net_add_dns: net
net_add_route: net
net_bootp6: net
net_bootp: net
net_del_addr: net
net_del_dns: net
net_del_route: net
net_dhcp: net
net_get_dhcp_option: net
net_ipv6_autoconf: net
net_ls_addr: net
net_ls_cards: net
net_ls_dns: net
net_ls_routes: net
net_nslookup: net
normal: normal
normal_exit: normal
outb: iorw
outl: iorw
outw: iorw
parttool: parttool
password: password
password_pbkdf2: password_pbkdf2
play: play
read: read
reboot: reboot
return: normal
rmmod: minicmd
search.file: search_fs_file
search.fs_label: search_label
search.fs_uuid: search_fs_uuid
setparams: normal
shift: normal
source: configfile
terminal_input: terminal
terminal_output: terminal
test: test
testload: testload
time: time
true: true
usb: usbtest
videoinfo: videoinfo
videotest: videotest
write_byte: memrw
write_dword: memrw
write_word: memrw
wrmsr: wrmsr
xnu_devprop_load: xnu
xnu_kernel64: xnu
xnu_kernel: xnu
xnu_kext: xnu
xnu_kextdir: xnu
xnu_mkext: xnu
xnu_ramdisk: xnu
xnu_resume: xnu
xnu_uuid: xnu_uuid
zfs-bootfs: zfsinfo
zfsinfo: zfsinfo

./old-debian12/boot/grub/x86_64-efi/crypto.lst

RIJNDAEL: gcry_rijndael
RIJNDAEL192: gcry_rijndael
RIJNDAEL256: gcry_rijndael
AES128: gcry_rijndael
AES-128: gcry_rijndael
AES-192: gcry_rijndael
AES-256: gcry_rijndael
ADLER32: adler32
CRC64: crc64
ARCFOUR: gcry_arcfour
BLOWFISH: gcry_blowfish
CAMELLIA128: gcry_camellia
CAMELLIA192: gcry_camellia
CAMELLIA256: gcry_camellia
CAST5: gcry_cast5
CRC32: gcry_crc
CRC32RFC1510: gcry_crc
CRC24RFC2440: gcry_crc
DES: gcry_des
3DES: gcry_des
DSA: gcry_dsa
IDEA: gcry_idea
MD4: gcry_md4
MD5: gcry_md5
RFC2268_40: gcry_rfc2268
AES: gcry_rijndael
AES192: gcry_rijndael
AES256: gcry_rijndael
RIPEMD160: gcry_rmd160
RSA: gcry_rsa
SEED: gcry_seed
SERPENT128: gcry_serpent
SERPENT192: gcry_serpent
SERPENT256: gcry_serpent
SHA1: gcry_sha1
SHA224: gcry_sha256
SHA256: gcry_sha256
SHA512: gcry_sha512
SHA384: gcry_sha512
TIGER192: gcry_tiger
TIGER: gcry_tiger
TIGER2: gcry_tiger
TWOFISH: gcry_twofish
TWOFISH128: gcry_twofish
WHIRLPOOL: gcry_whirlpool

./old-debian12/boot/grub/x86_64-efi/fs.lst

affs
afs
bfs
btrfs
cbfs
cpio
cpio_be
exfat
ext2
f2fs
fat
hfs
hfsplus
iso9660
jfs
minix
minix2
minix2_be
minix3
minix3_be
minix_be
newc
nilfs2
ntfs
odc
procfs
reiserfs
romfs
sfs
squash4
tar
udf
ufs1
ufs1_be
ufs2
xfs
zfs

./old-debian12/boot/grub/x86_64-efi/load.cfg

search.fs_uuid f5b59259-3f9f-4129-bdf5-4503c42a19a8 root hd0,gpt1 
set prefix=($root)'/boot/grub'

./old-debian12/boot/grub/x86_64-efi/moddep.lst

xfs: fshelp
fshelp:
videotest_checksum: video_fb font functional_test
relocator: mmap
procfs: archelp
offsetio:
lsefisystab:
loadbios:
gcry_seed: crypto
ufs2:
tr: extcmd
lsacpi: extcmd acpi
json:
gfxterm_background: extcmd gfxterm bitmap video video_colors bitmap_scale
file: offsetio extcmd elf macho
xnu_uuid: gcry_md5
part_sunpc:
extcmd:
echo: extcmd
btrfs: gzio lzopio raid6rec zstd
read:
priority_queue:
lsefimmap:
gcry_dsa: mpi pgp
ctz_test: functional_test
cbls: cbtable
zfs: gzio
progress: normal
minix:
setjmp:
macbless: disk
hfspluscomp: gzio hfsplus
gcry_rsa: mpi pgp
cat: extcmd
videotest: font video gfxmenu
sleep: extcmd normal
reiserfs: fshelp
lspci: extcmd
div:
video_cirrus: video_fb video
testload:
search_fs_uuid:
part_dvh:
gcry_md5: crypto
gcry_arcfour: crypto
ufs1_be:
part_acorn:
iorw: extcmd
gfxterm: font video
cpio_be: archelp
scsi:
memdisk:
fixvideo:
crc64: crypto
ata: scsi
tpm:
multiboot2: relocator boot net acpi linux video mmap
gcry_idea: crypto
cpuid: extcmd
cmp_test: functional_test
video_fb:
sfs: fshelp
zfscrypt: extcmd zfs crypto pbkdf2 gcry_rijndael gcry_sha1
video_bochs: video_fb video
udf: fshelp
datehook: datetime
adler32: crypto
setjmp_test: setjmp functional_test
ntfscomp: ntfs
nativedisk:
eval: normal
videoinfo: video
pbkdf2: crypto
password_pbkdf2: crypto pbkdf2 normal gcry_sha512
font: bufio video
datetime:
crypto:
strtoull_test: functional_test
pcidump: extcmd
mdraid09_be: diskfilter
afsplitter: crypto
normal: extcmd datetime crypto boot net bufio gettext terminal
tftp: net
gcry_whirlpool: crypto
fat: fshelp
setpci: extcmd
boot:
ufs1:
cpio: archelp
chain: boot net efinet
cbmemc: normal terminfo cbtable
tga: bufio bitmap
spkmodem: terminfo
odc: archelp
usbserial_pl2303: usb serial usbserial_common
regexp: extcmd normal
password: crypto normal
ntfs: fshelp
net: priority_queue datetime boot bufio
loadenv: extcmd disk
gzio: gcry_crc
ehci: boot cs5536 usb
archelp:
kernel:
usbtest: usb
linuxefi: boot linux
gptsync: disk
date: datetime
xnu: relocator extcmd boot random bitmap video mmap bitmap_scale macho
mul_test: functional_test
bufio:
acpi: extcmd mmap
png: bufio bitmap
minix2:
cs5536:
linux: relocator boot video mmap
gcry_des: crypto
gcry_blowfish: crypto
part_plan:
part_bsd: part_msdos
lvm: diskfilter
lsefi:
gcry_tiger: crypto
blocklist:
xzio: crypto
usb_keyboard: usb keylayouts
nilfs2: fshelp
lsmmap: mmap
gcry_cast5: crypto
backtrace:
appleldr: boot
testspeed: extcmd normal
squash4: fshelp gzio xzio lzopio
msdospart: disk parttool
lzopio: crypto
gfxterm_menu: procfs video_fb font normal functional_test
gcry_sha256: crypto
usb:
pata: ata
affs: fshelp
syslinuxcfg: extcmd normal
random: hexdump
part_amiga:
play:
part_apple:
mpi: crypto
keylayouts:
jpeg: bufio bitmap
gcry_rmd160: crypto
efifwsetup:
cbfs: archelp
time:
lssal:
loopback: extcmd
disk:
at_keyboard: boot keylayouts
true:
test:
part_sun:
part_msdos:
morse:
http: net
part_gpt:
luks2: json crypto pbkdf2 afsplitter cryptodisk
elf:
diskfilter:
bitmap:
cmp:
uhci: usb
ls: extcmd datetime normal
search: extcmd search_fs_uuid search_fs_file search_label
raid6rec: diskfilter
minix3_be:
memrw: extcmd
cbtime: cbtable
zstd:
raid5rec: diskfilter
rdmsr: extcmd
hello: extcmd
video:
shift_test: functional_test
minix2_be:
hashsum: extcmd crypto normal
video_colors:
mdraid1x: diskfilter
gcry_twofish: crypto
gcry_sha512: crypto
cryptodisk: procfs extcmd crypto
parttool: normal
ohci: boot cs5536 usb
mmap:
minix3:
gfxmenu: gfxterm font normal bitmap video video_colors bitmap_scale trig
dm_nv: diskfilter
search_fs_file:
luks: crypto pbkdf2 afsplitter cryptodisk
ldm: part_msdos part_gpt diskfilter
hfsplus: fshelp
hfs: fshelp
hexdump: extcmd
gettext:
gcry_rijndael: crypto
aout:
terminal:
probe: extcmd
functional_test: extcmd btrfs video_fb video
minicmd:
geli: crypto pbkdf2 gcry_sha256 cryptodisk gcry_sha512
gcry_rfc2268: crypto
f2fs: fshelp
ext2: fshelp
bsd: relocator extcmd gcry_md5 cpuid crypto boot elf video mmap aout serial
terminfo: extcmd
legacy_password_test: functional_test legacycfg
gcry_crc: crypto
gcry_camellia: crypto
bitmap_scale: bitmap
part_dfly:
efinet: net
cbtable:
usbms: scsi usb
sleep_test: datetime functional_test
div_test: div functional_test
zfsinfo: zfs
wrmsr:
newc: archelp
multiboot: relocator boot net linux video mmap
linux16: relocator boot linux video mmap
keystatus: extcmd
jfs:
gcry_md4: crypto
mdraid09: diskfilter
iso9660: fshelp
cmdline_cat_test: procfs video_fb font normal functional_test
bswap_test: functional_test
afs: fshelp
search_label:
reboot:
pgp: extcmd crypto mpi gcry_sha1
efi_gop: video_fb video
xnu_uuid_test: functional_test
test_blockarg: extcmd normal
serial: extcmd terminfo
configfile: normal
romfs: fshelp
minix_be:
help: extcmd normal
halt: acpi
gcry_sha1: crypto
usbserial_usbdebug: usb serial usbserial_common
usbserial_ftdi: usb serial usbserial_common
hdparm: extcmd hexdump
trig:
tar: archelp
legacycfg: gcry_md5 crypto normal password
ahci: ata boot
pbkdf2_test: pbkdf2 functional_test gcry_sha1
macho:
efi_uga: video_fb video
smbios: extcmd
signature_test: procfs functional_test
gcry_serpent: crypto
bfs: fshelp
usbserial_common: usb serial
exfctest: functional_test
exfat: fshelp
all_video: efi_gop efi_uga video_bochs video_cirrus

./old-debian12/boot/grub/x86_64-efi/modinfo.sh

#!/bin/bash

# User-controllable options
grub_modinfo_target_cpu=x86_64
grub_modinfo_platform=efi
grub_disk_cache_stats=0
grub_boot_time_stats=0
grub_have_font_source=1

# Autodetected config
grub_have_asm_uscore=0
grub_bss_start_symbol=""
grub_end_symbol=""

# Build environment
grub_target_cc='gcc-12'
grub_target_cc_version='gcc-12 (Debian 12.2.0-14+deb12u1) 12.2.0'
grub_target_cflags='-std=gnu99 -Os -m64 -Wall -W -Wshadow -Wpointer-arith -Wundef -Wchar-subscripts -Wcomment -Wdeprecated-declarations -Wdisabled-optimization -Wdiv-by-zero -Wfloat-equal -Wformat-extra-args -Wformat-security -Wformat-y2k -Wimplicit -Wimplicit-function-declaration -Wimplicit-int -Wmain -Wmissing-braces -Wmissing-format-attribute -Wmultichar -Wparentheses -Wreturn-type -Wsequence-point -Wshadow -Wsign-compare -Wswitch -Wtrigraphs -Wunknown-pragmas -Wunused -Wunused-function -Wunused-label -Wunused-parameter -Wunused-value  -Wunused-variable -Wwrite-strings -Wnested-externs -Wstrict-prototypes -g -Wredundant-decls -Wmissing-prototypes -Wmissing-declarations  -Wextra -Wattributes -Wendif-labels -Winit-self -Wint-to-pointer-cast -Winvalid-pch -Wmissing-field-initializers -Wnonnull -Woverflow -Wvla -Wpointer-to-int-cast -Wstrict-aliasing -Wvariadic-macros -Wvolatile-register-var -Wpointer-sign -Wmissing-include-dirs -Wmissing-prototypes -Wmissing-declarations -Wformat=2 -freg-struct-return -mno-mmx -mno-sse -mno-sse2 -mno-sse3 -mno-3dnow -msoft-float -fno-dwarf2-cfi-asm -mno-stack-arg-probe -fno-asynchronous-unwind-tables -fno-unwind-tables -fno-ident -mcmodel=large -mno-red-zone -fno-PIE -fno-pie -fno-stack-protector -Wtrampolines -Werror'
grub_target_cppflags='-Wno-unused-but-set-variable -Wall -W  -DGRUB_MACHINE_EFI=1 -DGRUB_MACHINE=X86_64_EFI -m64 -nostdinc -isystem /usr/lib/gcc/x86_64-linux-gnu/12/include -I$(top_srcdir)/include -I$(top_builddir)/include'
grub_target_ccasflags=' -m64 -g  -msoft-float -fno-PIE -fno-pie'
grub_target_ldflags='-no-pie -m64 -Wl,-melf_x86_64 -no-pie -Wl,--build-id=none'
grub_cflags=''
grub_cppflags=' -D_FILE_OFFSET_BITS=64'
grub_ccasflags=''
grub_ldflags=''
grub_target_strip='strip'
grub_target_nm='nm'
grub_target_ranlib='ranlib'
grub_target_objconf=''
grub_target_obj2elf=''
grub_target_img_base_ldopt='-Wl,-Ttext'
grub_target_img_ldflags='@TARGET_IMG_BASE_LDFLAGS@'

# Version
grub_version="2.06"
grub_package="grub"
grub_package_string="GRUB 2.06-13+deb12u2"
grub_package_version="2.06-13+deb12u2"
grub_package_name="GRUB"
grub_package_bugreport="bug-grub@gnu.org"

./old-debian12/boot/grub/x86_64-efi/partmap.lst

part_acorn
part_amiga
part_apple
part_bsd
part_dfly
part_dvh
part_gpt
part_msdos
part_plan
part_sun
part_sunpc

./old-debian12/boot/grub/x86_64-efi/parttool.lst

msdos: msdospart

./old-debian12/boot/grub/x86_64-efi/terminal.lst

iat_keyboard: at_keyboard
iserial: serial
iserial_*: serial
oaudio: morse
ocbmemc: cbmemc
ogfxterm: gfxterm
oserial: serial
oserial_*: serial
ospkmodem: spkmodem

./old-debian12/boot/grub/x86_64-efi/video.lst

efi_gop
efi_uga
video_bochs
video_cirrus

./old-debian12/etc/NetworkManager/dispatcher.d/cloud-init-hook-network-manager

#!/bin/sh
# This file is part of cloud-init. See LICENSE file for license information.

# This script hooks into NetworkManager(8) via its scripts
# arguments are 'interface-name' and 'action'
#
is_azure() {
    local dmi_path="/sys/class/dmi/id/board_vendor" vendor=""
    if [ -e "$dmi_path" ] && read vendor < "$dmi_path"; then
        [ "$vendor" = "Microsoft Corporation" ] && return 0
    fi
    return 1
}

is_enabled() {
    # only execute hooks if cloud-init is enabled and on azure
    [ -e /run/cloud-init/enabled ] || return 1
    is_azure
}

if is_enabled; then
    case "$1:$2" in
        *:up) exec cloud-init dhclient-hook up "$1";;
        *:down) exec cloud-init dhclient-hook down "$1";;
    esac
fi

./old-debian12/etc/apt/sources.list

# See /etc/apt/sources.list.d/debian.sources
deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware

./old-debian12/etc/apt/sources.list.d/debian.sources

Types: deb deb-src
URIs: mirror+file:///etc/apt/mirrors/debian.list
Suites: bookworm bookworm-updates bookworm-backports
Components: main
Signed-By: /usr/share/keyrings/debian-archive-keyring.gpg

Types: deb deb-src
URIs: mirror+file:///etc/apt/mirrors/debian-security.list
Suites: bookworm-security
Components: main
Signed-By: /usr/share/keyrings/debian-archive-keyring.gpg

./old-debian12/etc/apt/sources.list.d/docker.list

deb [arch=amd64 signed-by=/etc/apt/keyrings/docker.gpg] https://download.docker.com/linux/debian   bookworm stable

./old-debian12/etc/cloud/clean.d/README

-- cloud-init's clean.d run-parts directory --

This directory is provided for third party applications which need
additional configuration artifact cleanup from the filesystem when
the command `cloud-init clean` is invoked.

The `cloud-init clean` operation is typically performed by image creators
when preparing a golden image for clone and redeployment. The clean command
removes any cloud-init semaphores, allowing cloud-init to treat the next
boot of this image as the "first boot". When the image is next booted
cloud-init will performing all initial configuration based on any valid
datasource meta-data and user-data.

Any executable scripts in this subdirectory will be invoked in lexicographical
order with run-parts by the command: sudo cloud-init clean.

Typical format of such scripts would be a ##-<some-app> like the following:
  /etc/cloud/clean.d/99-live-installer

./old-debian12/etc/cloud/cloud.cfg

# The top level settings are used as module
# and system configuration.
# A set of users which may be applied and/or used by various modules
# when a 'default' entry is found it will reference the 'default_user'
# from the distro configuration specified below
users:
   - default


# If this is set, 'root' will not be able to ssh in and they
# will get a message to login instead as the default $user
disable_root: true

# This will cause the set+update hostname module to not operate (if true)
preserve_hostname: false

apt:
   # This prevents cloud-init from rewriting apt's sources.list file,
   # which has been a source of surprise.
   preserve_sources_list: true

# If you use datasource_list array, keep array items in a single line.
# If you use multi line array, ds-identify script won't read array items.
# Example datasource config
# datasource:
#    Ec2:
#      metadata_urls: [ 'blah.com' ]
#      timeout: 5 # (defaults to 50 seconds)
#      max_wait: 10 # (defaults to 120 seconds)




# The modules that run in the 'init' stage
cloud_init_modules:
 - migrator
 - seed_random
 - bootcmd
 - write-files
 - growpart
 - resizefs
 - disk_setup
 - mounts
 - set_hostname
 - update_hostname
 - update_etc_hosts
 - ca-certs
 - rsyslog
 - users-groups
 - ssh

# The modules that run in the 'config' stage
cloud_config_modules:
 - snap
 - ssh-import-id
 - keyboard
 - locale
 - set-passwords
 - grub-dpkg
 - apt-pipelining
 - apt-configure
 - ntp
 - timezone
 - disable-ec2-metadata
 - runcmd
 - byobu

# The modules that run in the 'final' stage
cloud_final_modules:
 - package-update-upgrade-install
 - fan
 - landscape
 - lxd
 - write-files-deferred
 - puppet
 - chef
 - mcollective
 - salt-minion
 - reset_rmc
 - refresh_rmc_and_interface
 - rightscale_userdata
 - scripts-vendor
 - scripts-per-once
 - scripts-per-boot
 - scripts-per-instance
 - scripts-user
 - ssh-authkey-fingerprints
 - keys-to-console
 - install-hotplug
 - phone-home
 - final-message
 - power-state-change

# System and/or distro specific settings
# (not accessible to handlers/transforms)
system_info:
   # This will affect which distro class gets used
   distro: debian
   # Default user name + that default users groups (if added/used)
   default_user:
     name: debian
     lock_passwd: True
     gecos: Debian
     groups: [adm, audio, cdrom, dialout, dip, floppy, netdev, plugdev, sudo, video]
     sudo: ["ALL=(ALL) NOPASSWD:ALL"]
     shell: /bin/bash
   # Other config here will be given to the distro class and/or path classes
   paths:
      cloud_dir: /var/lib/cloud/
      templates_dir: /etc/cloud/templates/
   package_mirrors:
     - arches: [default]
       failsafe:
         primary: https://deb.debian.org/debian
         security: https://deb.debian.org/debian-security
   ssh_svcname: ssh

./old-debian12/etc/cloud/cloud.cfg.d/01_debian_cloud.cfg

apt:
  generate_mirrorlists: true

system_info:
  default_user:
    name: debian
    sudo: ALL=(ALL) NOPASSWD:ALL
    shell: /bin/bash
    lock_passwd: True
    gecos: Debian
    groups: [adm, audio, cdrom, dialout, dip, floppy, plugdev, sudo, video]
    sudo: ["ALL=(ALL) NOPASSWD:ALL"]
    shell: /bin/bash

./old-debian12/etc/cloud/cloud.cfg.d/05_logging.cfg

## This yaml formated config file handles setting
## logger information.  The values that are necessary to be set
## are seen at the bottom.  The top '_log' are only used to remove
## redundency in a syslog and fallback-to-file case.
##
## The 'log_cfgs' entry defines a list of logger configs
## Each entry in the list is tried, and the first one that
## works is used.  If a log_cfg list entry is an array, it will
## be joined with '\n'.
_log:
 - &log_base |
   [loggers]
   keys=root,cloudinit
   
   [handlers]
   keys=consoleHandler,cloudLogHandler
   
   [formatters]
   keys=simpleFormatter,arg0Formatter
   
   [logger_root]
   level=DEBUG
   handlers=consoleHandler,cloudLogHandler
   
   [logger_cloudinit]
   level=DEBUG
   qualname=cloudinit
   handlers=
   propagate=1
   
   [handler_consoleHandler]
   class=StreamHandler
   level=WARNING
   formatter=arg0Formatter
   args=(sys.stderr,)
   
   [formatter_arg0Formatter]
   format=%(asctime)s - %(filename)s[%(levelname)s]: %(message)s
   
   [formatter_simpleFormatter]
   format=[CLOUDINIT] %(filename)s[%(levelname)s]: %(message)s
 - &log_file |
   [handler_cloudLogHandler]
   class=FileHandler
   level=DEBUG
   formatter=arg0Formatter
   args=('/var/log/cloud-init.log', 'a', 'UTF-8')
 - &log_syslog |
   [handler_cloudLogHandler]
   class=handlers.SysLogHandler
   level=DEBUG
   formatter=simpleFormatter
   args=("/dev/log", handlers.SysLogHandler.LOG_USER)

log_cfgs:
# Array entries in this list will be joined into a string
# that defines the configuration.
#
# If you want logs to go to syslog, uncomment the following line.
# - [ *log_base, *log_syslog ]
#
# The default behavior is to just log to a file.
# This mechanism that does not depend on a system service to operate.
 - [ *log_base, *log_file ]
# A file path can also be used.
# - /etc/log.conf

# This tells cloud-init to redirect its stdout and stderr to
# 'tee -a /var/log/cloud-init-output.log' so the user can see output
# there without needing to look on the console.
output: {all: '| tee -a /var/log/cloud-init-output.log'}

./old-debian12/etc/cloud/cloud.cfg.d/99-ssh.cfg

disable_root: 0
ssh_pwauth: 1
ssh_deletekeys: 0

./old-debian12/etc/cloud/cloud.cfg.d/README

# All files with the '.cfg' extension in this directory will be read by
# cloud-init. They are read in lexical order. Later files overwrite values in
# earlier files.

./old-debian12/etc/cloud/templates/chef_client.rb.tmpl

## template:jinja
{#
This file is only utilized if the module 'cc_chef' is enabled in
cloud-config. Specifically, in order to enable it
you need to add the following to config:
  chef:
    validation_key: XYZ
    validation_cert: XYZ
    validation_name: XYZ
    server_url: XYZ
-#}
{{generated_by}}
{#
The reason these are not in quotes is because they are ruby
symbols that will be placed inside here, and not actual strings...
#}
{% if chef_license %}
chef_license           "{{chef_license}}"
{% endif%}
{% if log_level %}
log_level              {{log_level}}
{% endif %}
{% if ssl_verify_mode %}
ssl_verify_mode        {{ssl_verify_mode}}
{% endif %}
{% if log_location %}
log_location           "{{log_location}}"
{% endif %}
{% if validation_name %}
validation_client_name "{{validation_name}}"
{% endif %}
{% if validation_cert %}
validation_key         "{{validation_key}}"
{% endif %}
{% if client_key %}
client_key             "{{client_key}}"
{% endif %}
{% if server_url %}
chef_server_url        "{{server_url}}"
{% endif %}
{% if environment %}
environment            "{{environment}}"
{% endif %}
{% if node_name %}
node_name              "{{node_name}}"
{% endif %}
{% if json_attribs %}
json_attribs           "{{json_attribs}}"
{% endif %}
{% if file_cache_path %}
file_cache_path        "{{file_cache_path}}"
{% endif %}
{% if file_backup_path %}
file_backup_path       "{{file_backup_path}}"
{% endif %}
{% if pid_file %}
pid_file               "{{pid_file}}"
{% endif %}
{% if show_time %}
Chef::Log::Formatter.show_time = true
{% endif %}
{% if encrypted_data_bag_secret %}
encrypted_data_bag_secret "{{encrypted_data_bag_secret}}"
{% endif %}

./old-debian12/etc/cloud/templates/chrony.conf.alpine.tmpl

## template:jinja
# Welcome to the chrony configuration file. See chrony.conf(5) for more
# information about usable directives.
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}

# This directive specifies the location of the file containing ID/key pairs for
# NTP authentication.
keyfile /etc/chrony/chrony.keys

# This directive specifies the file into which chronyd will store the rate
# information.
driftfile /var/lib/chrony/chrony.drift

# Uncomment the following line to turn logging on.
#log tracking measurements statistics

# Log files location.
logdir /var/log/chrony

# Stop bad estimates upsetting machine clock.
maxupdateskew 100.0

# This directive enables kernel synchronisation (every 11 minutes) of the
# real-time clock. Note that it can’t be used along with the 'rtcfile' directive.
rtcsync

# Step the system clock instead of slewing it if the adjustment is larger than
# one second, but only in the first three clock updates.
makestep 1 3

./old-debian12/etc/cloud/templates/chrony.conf.centos.tmpl

## template:jinja
# Use public servers from the pool.ntp.org project.
# Please consider joining the pool (http://www.pool.ntp.org/join.html).
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}

# Record the rate at which the system clock gains/losses time.
driftfile /var/lib/chrony/drift

# Allow the system clock to be stepped in the first three updates
# if its offset is larger than 1 second.
makestep 1.0 3

# Enable kernel synchronization of the real-time clock (RTC).
rtcsync

# Enable hardware timestamping on all interfaces that support it.
#hwtimestamp *

# Increase the minimum number of selectable sources required to adjust
# the system clock.
#minsources 2

# Allow NTP client access from local network.
#allow 192.168.0.0/16

# Serve time even if not synchronized to a time source.
#local stratum 10

# Specify file containing keys for NTP authentication.
#keyfile /etc/chrony.keys

# Specify directory for log files.
logdir /var/log/chrony

# Select which information is logged.
#log measurements statistics tracking

./old-debian12/etc/cloud/templates/chrony.conf.cos.tmpl

## template:jinja
# Welcome to the chrony configuration file. See chrony.conf(5) for more
# information about usuable directives.

{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}

# This directive specify the file into which chronyd will store the rate
# information.
driftfile /var/lib/chrony/chrony.drift

# This directive enables kernel synchronisation (every 11 minutes) of the
# real-time clock. Note that it can’t be used along with the 'rtcfile' directive.
rtcsync

# Step the system clock instead of slewing it if the adjustment is larger than
# one second, but only in the first three clock updates.
makestep 1 3

./old-debian12/etc/cloud/templates/chrony.conf.debian.tmpl

## template:jinja
# Welcome to the chrony configuration file. See chrony.conf(5) for more
# information about usuable directives.
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}

# This directive specify the location of the file containing ID/key pairs for
# NTP authentication.
keyfile /etc/chrony/chrony.keys

# This directive specify the file into which chronyd will store the rate
# information.
driftfile /var/lib/chrony/chrony.drift

# Uncomment the following line to turn logging on.
#log tracking measurements statistics

# Log files location.
logdir /var/log/chrony

# Stop bad estimates upsetting machine clock.
maxupdateskew 100.0

# This directive enables kernel synchronisation (every 11 minutes) of the
# real-time clock. Note that it can’t be used along with the 'rtcfile' directive.
rtcsync

# Step the system clock instead of slewing it if the adjustment is larger than
# one second, but only in the first three clock updates.
makestep 1 3

./old-debian12/etc/cloud/templates/chrony.conf.fedora.tmpl

## template:jinja
# Use public servers from the pool.ntp.org project.
# Please consider joining the pool (http://www.pool.ntp.org/join.html).
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}

# Record the rate at which the system clock gains/losses time.
driftfile /var/lib/chrony/drift

# Allow the system clock to be stepped in the first three updates
# if its offset is larger than 1 second.
makestep 1.0 3

# Enable kernel synchronization of the real-time clock (RTC).
rtcsync

# Enable hardware timestamping on all interfaces that support it.
#hwtimestamp *

# Increase the minimum number of selectable sources required to adjust
# the system clock.
#minsources 2

# Allow NTP client access from local network.
#allow 192.168.0.0/16

# Serve time even if not synchronized to a time source.
#local stratum 10

# Specify file containing keys for NTP authentication.
#keyfile /etc/chrony.keys

# Get TAI-UTC offset and leap seconds from the system tz database.
leapsectz right/UTC

# Specify directory for log files.
logdir /var/log/chrony

# Select which information is logged.
#log measurements statistics tracking

./old-debian12/etc/cloud/templates/chrony.conf.freebsd.tmpl

## template:jinja
#######################################################################
#
# This is an example chrony configuration file.  You should copy it to
# /usr/local/etc/chrony.conf after uncommenting and editing the options that you
# want to enable.  The more obscure options are not included.  Refer
# to the documentation for these.
#
#######################################################################
### COMMENTS
# Any of the following lines are comments (you have a choice of
# comment start character):
# a comment
% a comment
! a comment
; a comment
#
# Below, the '!' form is used for lines that you might want to
# uncomment and edit to make your own chrony.conf file.
#
#######################################################################
#######################################################################
### SPECIFY YOUR NTP SERVERS
# Most computers using chrony will send measurement requests to one or
# more 'NTP servers'.  You will probably find that your Internet Service
# Provider or company have one or more NTP servers that you can specify.
# Failing that, there are a lot of public NTP servers.  There is a list
# you can access at http://support.ntp.org/bin/view/Servers/WebHome or
# you can use servers from the pool.ntp.org project.

{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}

# This is a reasonable default setting to have on in typical cases for
# a workstation with a full-time internet connection:
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}

#######################################################################
### AVOIDING POTENTIALLY BOGUS CHANGES TO YOUR CLOCK
#
# To avoid changes being made to your computer's gain/loss compensation
# when the measurement history is too erratic, you might want to enable
# one of the following lines.  The first seems good with servers on the
# Internet, the second seems OK for a LAN environment.

! maxupdateskew 100
! maxupdateskew 5

# If you want to increase the minimum number of selectable sources
# required to update the system clock in order to make the
# synchronisation more reliable, uncomment (and edit) the following
# line.

! minsources 2

# If your computer has a good stable clock (e.g. it is not a virtual
# machine), you might also want to reduce the maximum assumed drift
# (frequency error) of the clock (the value is specified in ppm).

! maxdrift 100

# By default, chronyd allows synchronisation to an unauthenticated NTP
# source (i.e. specified without the nts and key options) if it agrees with
# a majority of authenticated NTP sources, or if no authenticated source is
# specified.  If you don't want chronyd to ever synchronise to an
# unauthenticated NTP source, uncomment the first from the following lines.
# If you don't want to synchronise to an unauthenticated NTP source only
# when an authenticated source is specified, uncomment the second line.
# If you want chronyd to ignore authentication in the source selection,
# uncomment the third line.

! authselectmode require
! authselectmode prefer
! authselectmode ignore

#######################################################################
### FILENAMES ETC
# Chrony likes to keep information about your computer's clock in files.
# The 'driftfile' stores the computer's clock gain/loss rate in parts
# per million.  When chronyd starts, the system clock can be tuned
# immediately so that it doesn't gain or lose any more time.  You
# generally want this, so it is uncommented.

driftfile /var/db/chrony/drift

# If you want to enable NTP authentication with symmetric keys, you will need
# to uncomment the following line and edit the file to set up the keys.

! keyfile /usr/local/etc/chrony.keys

# If you specify an NTP server with the nts option to enable authentication
# with the Network Time Security (NTS) mechanism, or enable server NTS with
# the ntsservercert and ntsserverkey directives below, the following line will
# allow the client/server to save the NTS keys and cookies in order to reduce
# the number of key establishments (NTS-KE sessions).

ntsdumpdir /var/db/chrony

# If chronyd is configured to act as an NTP server and you want to enable NTS
# for its clients, you will need a TLS certificate and private key.  Uncomment
# and edit the following lines to specify the locations of the certificate and
# key.

! ntsservercert /etc/.../foo.example.net.crt
! ntsserverkey /etc/.../foo.example.net.key

# chronyd can save the measurement history for the servers to files when
# it exits.  This is useful in 2 situations:
#
# 1. If you stop chronyd and restart it with the '-r' option (e.g. after
# an upgrade), the old measurements will still be relevant when chronyd
# is restarted.  This will reduce the time needed to get accurate
# gain/loss measurements.
#
# 2. On Linux, if you use the RTC support and start chronyd with
# '-r -s' on bootup, measurements from the last boot will still be
# useful (the real time clock is used to 'flywheel' chronyd between
# boots).
#
# Uncomment the following line to use this.

! dumpdir /var/db/chrony

# chronyd writes its process ID to a file.  If you try to start a second
# copy of chronyd, it will detect that the process named in the file is
# still running and bail out.  If you want to change the path to the PID
# file, uncomment this line and edit it.  The default path is shown.

! pidfile /var/run/chrony/chronyd.pid

# If the system timezone database is kept up to date and includes the
# right/UTC timezone, chronyd can use it to determine the current
# TAI-UTC offset and when will the next leap second occur.

! leapsectz right/UTC

#######################################################################
### INITIAL CLOCK CORRECTION
# This option is useful to quickly correct the clock on start if it's
# off by a large amount.  The value '1.0' means that if the error is less
# than 1 second, it will be gradually removed by speeding up or slowing
# down your computer's clock until it is correct.  If the error is above
# 1 second, an immediate time jump will be applied to correct it.  The
# value '3' means the step is allowed only in the first three updates of
# the clock.  Some software can get upset if the system clock jumps
# (especially backwards), so be careful!

! makestep 1.0 3

#######################################################################
### LEAP SECONDS
# A leap second is an occasional one-second correction of the UTC
# time scale.  By default, chronyd tells the kernel to insert/delete
# the leap second, which makes a backward/forward step to correct the
# clock for it.  As with the makestep directive, this jump can upset
# some applications.  If you prefer chronyd to make a gradual
# correction, causing the clock to be off for a longer time, uncomment
# the following line.

! leapsecmode slew

#######################################################################
### LOGGING
# If you want to log information about the time measurements chronyd has
# gathered, you might want to enable the following lines.  You probably
# only need this if you really enjoy looking at the logs, you want to
# produce some graphs of your system's timekeeping performance, or you
# need help in debugging a problem.
#
# If you enable logging, you may want to add an entry to a log rotation
# utility's configuration (e.g., newsyslog(8)).  'chronyc cyclelogs'
# should be used to signal chronyd that a log file has been renamed.

! logdir /var/log/chrony
! log measurements statistics tracking

# If you have real time clock support enabled (see below), you might want
# this line instead:

! log measurements statistics tracking rtc

#######################################################################
### ACTING AS AN NTP SERVER
# You might want the computer to be an NTP server for other computers.
#
# By default, chronyd does not allow any clients to access it.  You need
# to explicitly enable access using 'allow' and 'deny' directives.
#
# e.g. to enable client access from the 192.168.*.* class B subnet,

! allow 192.168/16

# .. but disallow the 192.168.100.* subnet of that,

! deny 192.168.100/24

# You can have as many allow and deny directives as you need.  The order
# is unimportant.

# If you want to present your computer's time for others to synchronise
# with, even if you don't seem to be synchronised to any NTP servers
# yourself, enable the following line.  The value 10 may be varied
# between 1 and 15.  You should avoid small values because you will look
# like a real NTP server.  The value 10 means that you appear to be 10
# NTP 'hops' away from an authoritative source (atomic clock, GPS
# receiver, radio clock etc).

! local stratum 10

# Normally, chronyd will keep track of how many times each client
# machine accesses it.  The information can be accessed by the 'clients'
# command of chronyc.  You can disable this facility by uncommenting the
# following line.  This will save a bit of memory if you have many
# clients and it will also disable support for the interleaved mode.

! noclientlog

# The clientlog size is limited to 512KB by default.  If you have many
# clients, you might want to increase the limit.

! clientloglimit 4194304

# By default, chronyd tries to respond to all valid NTP requests from
# allowed addresses.  If you want to limit the response rate for NTP
# clients that are sending requests too frequently, uncomment and edit
# the following line.

! ratelimit interval 3 burst 8

#######################################################################
### REPORTING BIG CLOCK CHANGES
# Perhaps you want to know if chronyd suddenly detects any large error
# in your computer's clock.  This might indicate a fault or a problem
# with the server(s) you are using, for example.
#
# The next option causes a message to be written to syslog when chronyd
# has to correct an error above 0.5 seconds (you can use any amount you
# like).

! logchange 0.5

# The next option will send email to the named person when chronyd has
# to correct an error above 0.5 seconds.  (If you need to send mail to
# several people, you need to set up a mailing list or sendmail alias
# for them and use the address of that.)

! mailonchange wibble@foo.example.net 0.5

#######################################################################
### COMMAND ACCESS
# The program chronyc is used to show the current operation of chronyd
# and to change parts of its configuration whilst it is running.

# By default chronyd binds to the loopback interface.  Uncomment the
# following lines to allow receiving command packets from remote hosts.

! bindcmdaddress 0.0.0.0
! bindcmdaddress ::

# Normally, chronyd will only allow connections from chronyc on the same
# machine as itself.  This is for security.  If you have a subnet
# 192.168.*.* and you want to be able to use chronyc from any machine on
# it, you could uncomment the following line.  (Edit this to your own
# situation.)

! cmdallow 192.168/16

# You can add as many 'cmdallow' and 'cmddeny' lines as you like.  The
# syntax and meaning is the same as for 'allow' and 'deny', except that
# 'cmdallow' and 'cmddeny' control access to the chronyd's command port.

# Rate limiting can be enabled also for command packets.  (Note,
# commands from localhost are never limited.)

! cmdratelimit interval -4 burst 16

#######################################################################
### HARDWARE TIMESTAMPING
# On Linux, if the network interface controller and its driver support
# hardware timestamping, it can significantly improve the accuracy of
# synchronisation. It can be enabled on specified interfaces only, or it
# can be enabled on all interfaces that support it.

! hwtimestamp eth0
! hwtimestamp *

#######################################################################
### REAL TIME CLOCK
# chronyd can characterise the system's real-time clock.  This is the
# clock that keeps running when the power is turned off, so that the
# machine knows the approximate time when it boots again.  The error at
# a particular epoch and gain/loss rate can be written to a file and
# used later by chronyd when it is started with the '-s' option.
#
# You need to have 'enhanced RTC support' compiled into your Linux
# kernel.  (Note, these options apply only to Linux.)

! rtcfile /var/db/chrony/rtc

# Your RTC can be set to keep Universal Coordinated Time (UTC) or local
# time.  (Local time means UTC +/- the effect of your timezone.)  If you
# use UTC, chronyd will function correctly even if the computer is off
# at the epoch when you enter or leave summer time (aka daylight saving
# time).  However, if you dual boot your system with Microsoft Windows,
# that will work better if your RTC maintains local time.  You take your
# pick!

! rtconutc

# By default chronyd assumes that the enhanced RTC device is accessed as
# /dev/rtc.  If it's accessed somewhere else on your system (e.g. you're
# using devfs), uncomment and edit the following line.

! rtcdevice /dev/misc/rtc

# Alternatively, if not using the -s option, this directive can be used
# to enable a mode in which the RTC is periodically set to the system
# time, with no tracking of its drift.

! rtcsync

#######################################################################
### REAL TIME SCHEDULER
# This directive tells chronyd to use the real-time FIFO scheduler with the
# specified priority (which must be between 0 and 100).  This should result
# in reduced latency.  You don't need it unless you really have a requirement
# for extreme clock stability.  Works only on Linux.  Note that the "-P"
# command-line switch will override this.

! sched_priority 1

#######################################################################
### LOCKING CHRONYD INTO RAM
# This directive tells chronyd to use the mlockall() syscall to lock itself
# into RAM so that it will never be paged out.  This should result in reduced
# latency.  You don't need it unless you really have a requirement
# for extreme clock stability.  Works only on Linux.  Note that the "-m"
# command-line switch will also enable this feature.

! lock_all

./old-debian12/etc/cloud/templates/chrony.conf.opensuse.tmpl

## template:jinja
# Use public servers from the pool.ntp.org project.
# Please consider joining the pool (http://www.pool.ntp.org/join.html).
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}

# Record the rate at which the system clock gains/losses time.
driftfile /var/lib/chrony/drift

# In first three updates step the system clock instead of slew
# if the adjustment is larger than 1 second.
makestep 1.0 3

# Enable kernel synchronization of the real-time clock (RTC).
rtcsync

# Allow NTP client access from local network.
#allow 192.168/16

# Serve time even if not synchronized to any NTP server.
#local stratum 10

# Specify file containing keys for NTP authentication.
#keyfile /etc/chrony.keys

# Specify directory for log files.
logdir /var/log/chrony

# Select which information is logged.
#log measurements statistics tracking

./old-debian12/etc/cloud/templates/chrony.conf.photon.tmpl

## template:jinja
# Use public servers from the pool.ntp.org project.
# Please consider joining the pool (http://www.pool.ntp.org/join.html).
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}

# Record the rate at which the system clock gains/losses time.
driftfile /var/lib/chrony/drift

# Allow the system clock to be stepped in the first three updates
# if its offset is larger than 1 second.
makestep 1.0 3

# Enable kernel synchronization of the real-time clock (RTC).
rtcsync

# Enable hardware timestamping on all interfaces that support it.
#hwtimestamp *

# Increase the minimum number of selectable sources required to adjust
# the system clock.
#minsources 2

# Allow NTP client access from local network.
#allow 192.168.0.0/16

# Serve time even if not synchronized to a time source.
#local stratum 10

# Specify file containing keys for NTP authentication.
#keyfile /etc/chrony.keys

# Get TAI-UTC offset and leap seconds from the system tz database.
leapsectz right/UTC

# Specify directory for log files.
logdir /var/log/chrony

# Select which information is logged.
#log measurements statistics tracking

./old-debian12/etc/cloud/templates/chrony.conf.rhel.tmpl

## template:jinja
# Use public servers from the pool.ntp.org project.
# Please consider joining the pool (http://www.pool.ntp.org/join.html).
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}

# Record the rate at which the system clock gains/losses time.
driftfile /var/lib/chrony/drift

# Allow the system clock to be stepped in the first three updates
# if its offset is larger than 1 second.
makestep 1.0 3

# Enable kernel synchronization of the real-time clock (RTC).
rtcsync

# Enable hardware timestamping on all interfaces that support it.
#hwtimestamp *

# Increase the minimum number of selectable sources required to adjust
# the system clock.
#minsources 2

# Allow NTP client access from local network.
#allow 192.168.0.0/16

# Serve time even if not synchronized to a time source.
#local stratum 10

# Specify file containing keys for NTP authentication.
#keyfile /etc/chrony.keys

# Specify directory for log files.
logdir /var/log/chrony

# Select which information is logged.
#log measurements statistics tracking

./old-debian12/etc/cloud/templates/chrony.conf.sles.tmpl

## template:jinja
# Use public servers from the pool.ntp.org project.
# Please consider joining the pool (http://www.pool.ntp.org/join.html).
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}

# Record the rate at which the system clock gains/losses time.
driftfile /var/lib/chrony/drift

# In first three updates step the system clock instead of slew
# if the adjustment is larger than 1 second.
makestep 1.0 3

# Enable kernel synchronization of the real-time clock (RTC).
rtcsync

# Allow NTP client access from local network.
#allow 192.168/16

# Serve time even if not synchronized to any NTP server.
#local stratum 10

# Specify file containing keys for NTP authentication.
#keyfile /etc/chrony.keys

# Specify directory for log files.
logdir /var/log/chrony

# Select which information is logged.
#log measurements statistics tracking

./old-debian12/etc/cloud/templates/chrony.conf.ubuntu.tmpl

## template:jinja
# Welcome to the chrony configuration file. See chrony.conf(5) for more
# information about usuable directives.

# Use servers from the NTP Pool Project. Approved by Ubuntu Technical Board
# on 2011-02-08 (LP: #104525). See http://www.pool.ntp.org/join.html for
# more information.
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}

# This directive specify the location of the file containing ID/key pairs for
# NTP authentication.
keyfile /etc/chrony/chrony.keys

# This directive specify the file into which chronyd will store the rate
# information.
driftfile /var/lib/chrony/chrony.drift

# Uncomment the following line to turn logging on.
#log tracking measurements statistics

# Log files location.
logdir /var/log/chrony

# Stop bad estimates upsetting machine clock.
maxupdateskew 100.0

# This directive enables kernel synchronisation (every 11 minutes) of the
# real-time clock. Note that it can’t be used along with the 'rtcfile' directive.
rtcsync

# Step the system clock instead of slewing it if the adjustment is larger than
# one second, but only in the first three clock updates.
makestep 1 3

./old-debian12/etc/cloud/templates/host.mariner.tmpl

+## template:jinja
+{#
+This file /etc/cloud/templates/hosts.mariner.tmpl is only utilized
+if enabled in cloud-config.  Specifically, in order to enable it
+you need to add the following to config:
+  manage_etc_hosts: True
+-#}
+# Your system has configured 'manage_etc_hosts' as True.
+# As a result, if you wish for changes to this file to persist
+# then you will need to either
+# a.) make changes to the master file in /etc/cloud/templates/hosts.mariner.tmpl
+# b.) change or remove the value of 'manage_etc_hosts' in
+#     /etc/cloud/cloud.cfg or cloud-config from user-data
+#
+# The following lines are desirable for IPv4 capable hosts
+127.0.0.1 {{fqdn}} {{hostname}}
+127.0.0.1 localhost.localdomain localhost
+127.0.0.1 localhost4.localdomain4 localhost4
+
+# The following lines are desirable for IPv6 capable hosts
+::1 {{fqdn}} {{hostname}}
+::1 localhost6.localdomain6 localhost6

./old-debian12/etc/cloud/templates/hosts.alpine.tmpl

## template:jinja
{#
This file /etc/cloud/templates/hosts.alpine.tmpl is only utilized
if enabled in cloud-config.  Specifically, in order to enable it
you need to add the following to config:
  manage_etc_hosts: True
-#}
# Your system has configured 'manage_etc_hosts' as True.
# As a result, if you wish for changes to this file to persist
# then you will need to either
# a.) make changes to the master file in /etc/cloud/templates/hosts.alpine.tmpl
# b.) change or remove the value of 'manage_etc_hosts' in
#     /etc/cloud/cloud.cfg or cloud-config from user-data
#
# The following lines are desirable for IPv4 capable hosts
127.0.1.1 {{hostname}} {{fqdn}}
127.0.0.1 localhost localhost.localdomain
127.0.0.1 localhost4 localhost4.localdomain4

# The following lines are desirable for IPv6 capable hosts
::1 {{hostname}} {{fqdn}}
::1 localhost6 localhost6.localdomain6

ff02::1 ip6-allnodes
ff02::2 ip6-allrouters

./old-debian12/etc/cloud/templates/hosts.arch.tmpl

## template:jinja
{#
This file (/etc/cloud/templates/hosts.arch.tmpl) is only utilized
if enabled in cloud-config.  Specifically, in order to enable it
you need to add the following to config:
   manage_etc_hosts: True
-#}
# Your system has configured 'manage_etc_hosts' as True.
# As a result, if you wish for changes to this file to persist
# then you will need to either
# a.) make changes to the master file in /etc/cloud/templates/hosts.arch.tmpl
# b.) change or remove the value of 'manage_etc_hosts' in
#     /etc/cloud/cloud.cfg or cloud-config from user-data
#
{# The value '{{hostname}}' will be replaced with the local-hostname -#}
127.0.1.1 {{fqdn}} {{hostname}}
127.0.0.1 localhost

# The following lines are desirable for IPv6 capable hosts
::1 localhost ip6-localhost ip6-loopback
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters

./old-debian12/etc/cloud/templates/hosts.debian.tmpl

## template:jinja
{#
This file (/etc/cloud/templates/hosts.debian.tmpl) is only utilized
if enabled in cloud-config.  Specifically, in order to enable it
you need to add the following to config:
   manage_etc_hosts: True
-#}
# Your system has configured 'manage_etc_hosts' as True.
# As a result, if you wish for changes to this file to persist
# then you will need to either
# a.) make changes to the master file in /etc/cloud/templates/hosts.debian.tmpl
# b.) change or remove the value of 'manage_etc_hosts' in
#     /etc/cloud/cloud.cfg or cloud-config from user-data
#
{# The value '{{hostname}}' will be replaced with the local-hostname -#}
127.0.1.1 {{fqdn}} {{hostname}}
127.0.0.1 localhost

# The following lines are desirable for IPv6 capable hosts
::1 localhost ip6-localhost ip6-loopback
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters

./old-debian12/etc/cloud/templates/hosts.freebsd.tmpl

## template:jinja
{#
This file /etc/cloud/templates/hosts.freebsd.tmpl is only utilized
if enabled in cloud-config.  Specifically, in order to enable it
you need to add the following to config:
  manage_etc_hosts: True
-#}
# Your system has configured 'manage_etc_hosts' as True.
# As a result, if you wish for changes to this file to persist
# then you will need to either
# a.) make changes to the master file in /etc/cloud/templates/hosts.freebsd.tmpl
# b.) change or remove the value of 'manage_etc_hosts' in
#     /etc/cloud/cloud.cfg or cloud-config from user-data

# The following lines are desirable for IPv6 capable hosts
::1 {{fqdn}} {{hostname}}
::1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6

# The following lines are desirable for IPv4 capable hosts
127.0.0.1 {{fqdn}} {{hostname}}
127.0.0.1 localhost.localdomain localhost
127.0.0.1 localhost4.localdomain4 localhost4

./old-debian12/etc/cloud/templates/hosts.gentoo.tmpl

## template:jinja
{#
This file /etc/cloud/templates/hosts.gentoo.tmpl is only utilized
if enabled in cloud-config.  Specifically, in order to enable it
you need to add the following to config:
  manage_etc_hosts: True
-#}
# Your system has configured 'manage_etc_hosts' as True.
# As a result, if you wish for changes to this file to persist
# then you will need to either
# a.) make changes to the master file in /etc/cloud/templates/hosts.gentoo.tmpl
# b.) change or remove the value of 'manage_etc_hosts' in
#     /etc/cloud/cloud.cfg or cloud-config from user-data
#
# The following lines are desirable for IPv4 capable hosts
127.0.0.1 {{fqdn}} {{hostname}}
127.0.0.1 localhost.localdomain localhost
127.0.0.1 localhost4.localdomain4 localhost4

# The following lines are desirable for IPv6 capable hosts
::1 {{fqdn}} {{hostname}}
::1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6

./old-debian12/etc/cloud/templates/hosts.photon.tmpl

## template:jinja
{#
This file /etc/cloud/templates/hosts.photon.tmpl is only utilized
if enabled in cloud-config.  Specifically, in order to enable it
you need to add the following to config:
  manage_etc_hosts: True
-#}
# Your system has configured 'manage_etc_hosts' as True.
# As a result, if you wish for changes to this file to persist
# then you will need to either
# a.) make changes to the master file in /etc/cloud/templates/hosts.photon.tmpl
# b.) change or remove the value of 'manage_etc_hosts' in
#     /etc/cloud/cloud.cfg or cloud-config from user-data
#
# The following lines are desirable for IPv4 capable hosts
127.0.0.1 {{fqdn}} {{hostname}}
127.0.0.1 localhost.localdomain localhost
127.0.0.1 localhost4.localdomain4 localhost4

# The following lines are desirable for IPv6 capable hosts
::1 {{fqdn}} {{hostname}}
::1 localhost6.localdomain6 localhost6

./old-debian12/etc/cloud/templates/hosts.redhat.tmpl

## template:jinja
{#
This file /etc/cloud/templates/hosts.redhat.tmpl is only utilized
if enabled in cloud-config.  Specifically, in order to enable it
you need to add the following to config:
  manage_etc_hosts: True
-#}
# Your system has configured 'manage_etc_hosts' as True.
# As a result, if you wish for changes to this file to persist
# then you will need to either
# a.) make changes to the master file in /etc/cloud/templates/hosts.redhat.tmpl
# b.) change or remove the value of 'manage_etc_hosts' in
#     /etc/cloud/cloud.cfg or cloud-config from user-data
# 
# The following lines are desirable for IPv4 capable hosts
127.0.0.1 {{fqdn}} {{hostname}}
127.0.0.1 localhost.localdomain localhost
127.0.0.1 localhost4.localdomain4 localhost4

# The following lines are desirable for IPv6 capable hosts
::1 {{fqdn}} {{hostname}}
::1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6

./old-debian12/etc/cloud/templates/hosts.suse.tmpl

## template:jinja
{#
This file /etc/cloud/templates/hosts.suse.tmpl is only utilized
if enabled in cloud-config.  Specifically, in order to enable it
you need to add the following to config:
  manage_etc_hosts: True
-#}
# Your system has configured 'manage_etc_hosts' as True.
# As a result, if you wish for changes to this file to persist
# then you will need to either
# a.) make changes to the master file in /etc/cloud/templates/hosts.suse.tmpl
# b.) change or remove the value of 'manage_etc_hosts' in
#     /etc/cloud/cloud.cfg or cloud-config from user-data
#
# The following lines are desirable for IPv4 capable hosts
127.0.1.1 {{fqdn}} {{hostname}}
127.0.0.1 localhost.localdomain localhost
127.0.0.1 localhost4.localdomain4 localhost4

# The following lines are desirable for IPv6 capable hosts
::1 {{fqdn}} {{hostname}}
::1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
::1 localhost ipv6-localhost ipv6-loopback


fe00::0 ipv6-localnet
ff00::0 ipv6-mcastprefix
ff02::1 ipv6-allnodes
ff02::2 ipv6-allrouters
ff02::3 ipv6-allhosts

./old-debian12/etc/cloud/templates/ntp.conf.alpine.tmpl

## template:jinja
# /etc/ntp.conf
#
# Configuration for Busybox ntpd - it only supports "server" lines.

{% if servers %}# Servers
{% endif %}
{% for server in servers -%}
server {{server}}
{% endfor %}

./old-debian12/etc/cloud/templates/ntp.conf.debian.tmpl

## template:jinja

# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help

driftfile /var/lib/ntp/ntp.drift

# Enable this if you want statistics to be logged.
#statsdir /var/log/ntpstats/

statistics loopstats peerstats clockstats
filegen loopstats file loopstats type day enable
filegen peerstats file peerstats type day enable
filegen clockstats file clockstats type day enable


# You do need to talk to an NTP server or two (or three).
#server ntp.your-provider.example

# pool.ntp.org maps to about 1000 low-stratum NTP servers.  Your server will
# pick a different set every time it starts up.  Please consider joining the
# pool: <http://www.pool.ntp.org/join.html>
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}

# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
# might also be helpful.
#
# Note that "restrict" applies to both servers and clients, so a configuration
# that might be intended to block requests from certain clients could also end
# up blocking replies from your own upstream servers.

# By default, exchange time with everybody, but don't allow configuration.
restrict -4 default kod notrap nomodify nopeer noquery limited
restrict -6 default kod notrap nomodify nopeer noquery limited

# Local users may interrogate the ntp server more closely.
restrict 127.0.0.1
restrict ::1

# Needed for adding pool entries
restrict source notrap nomodify noquery

# Clients from this (example!) subnet have unlimited access, but only if
# cryptographically authenticated.
#restrict 192.168.123.0 mask 255.255.255.0 notrust


# If you want to provide time to your local subnet, change the next line.
# (Again, the address is an example only.)
#broadcast 192.168.123.255

# If you want to listen to time broadcasts on your local subnet, de-comment the
# next lines.  Please do this only if you trust everybody on the network!
#disable auth
#broadcastclient

./old-debian12/etc/cloud/templates/ntp.conf.fedora.tmpl

## template:jinja

# For more information about this file, see the man pages
# ntp.conf(5), ntp_acc(5), ntp_auth(5), ntp_clock(5), ntp_misc(5), ntp_mon(5).

driftfile /var/lib/ntp/drift

# Permit time synchronization with our time source, but do not
# permit the source to query or modify the service on this system.
restrict default nomodify notrap nopeer noquery

# Permit all access over the loopback interface.  This could
# be tightened as well, but to do so would effect some of
# the administrative functions.
restrict 127.0.0.1 
restrict ::1

# Hosts on local network are less restricted.
#restrict 192.168.1.0 mask 255.255.255.0 nomodify notrap

# Use public servers from the pool.ntp.org project.
# Please consider joining the pool (http://www.pool.ntp.org/join.html).
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}

#broadcast 192.168.1.255 autokey	# broadcast server
#broadcastclient			# broadcast client
#broadcast 224.0.1.1 autokey		# multicast server
#multicastclient 224.0.1.1		# multicast client
#manycastserver 239.255.254.254		# manycast server
#manycastclient 239.255.254.254 autokey # manycast client

# Enable public key cryptography.
#crypto

includefile /etc/ntp/crypto/pw

# Key file containing the keys and key identifiers used when operating
# with symmetric key cryptography. 
keys /etc/ntp/keys

# Specify the key identifiers which are trusted.
#trustedkey 4 8 42

# Specify the key identifier to use with the ntpdc utility.
#requestkey 8

# Specify the key identifier to use with the ntpq utility.
#controlkey 8

# Enable writing of statistics records.
#statistics clockstats cryptostats loopstats peerstats

# Disable the monitoring facility to prevent amplification attacks using ntpdc
# monlist command when default restrict does not include the noquery flag. See
# CVE-2013-5211 for more details.
# Note: Monitoring will not be disabled with the limited restriction flag.
disable monitor

./old-debian12/etc/cloud/templates/ntp.conf.freebsd.tmpl

## template:jinja

#
# $FreeBSD$
#
# Default NTP servers for the FreeBSD operating system.
#
# Don't forget to enable ntpd in /etc/rc.conf with:
# ntpd_enable="YES"
#
# The driftfile is by default /var/db/ntpd.drift, check
# /etc/defaults/rc.conf on how to change the location.
#

#
# Set the target and limit for adding servers configured via pool statements
# or discovered dynamically via mechanisms such as broadcast and manycast.
# Ntpd automatically adds maxclock-1 servers from configured pools, and may
# add as many as maxclock*2 if necessary to ensure that at least minclock
# servers are providing good consistent time.
#
tos minclock 3 maxclock 6

#
# The following pool statement will give you a random set of NTP servers
# geographically close to you.  A single pool statement adds multiple
# servers from the pool, according to the tos minclock/maxclock targets.
# See http://www.pool.ntp.org/ for details.  Note, pool.ntp.org encourages
# users with a static IP and good upstream NTP servers to add a server
# to the pool. See http://www.pool.ntp.org/join.html if you are interested.
#
# The option `iburst' is used for faster initial synchronization.
#
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}

#
# To configure a specific server, such as an organization-wide local
# server, add lines similar to the following.  One or more specific
# servers can be configured in addition to, or instead of, any server
# pools specified above.  When both are configured, ntpd first adds all
# the specific servers, then adds servers from the pool until the tos
# minclock/maxclock targets are met.
#
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}

#
# Security:
#
# By default, only allow time queries and block all other requests
# from unauthenticated clients.
#
# The "restrict source" line allows peers to be mobilized when added by
# ntpd from a pool, but does not enable mobilizing a new peer association
# by other dynamic means (broadcast, manycast, ntpq commands, etc).
#
# See http://support.ntp.org/bin/view/Support/AccessRestrictions
# for more information.
#
restrict default limited kod nomodify notrap noquery nopeer
restrict source  limited kod nomodify notrap noquery

#
# Alternatively, the following rules would block all unauthorized access.
#
#restrict default ignore
#
# In this case, all remote NTP time servers also need to be explicitly
# allowed or they would not be able to exchange time information with
# this server.
#
# Please note that this example doesn't work for the servers in
# the pool.ntp.org domain since they return multiple A records.
#
#restrict 0.pool.ntp.org nomodify nopeer noquery notrap
#restrict 1.pool.ntp.org nomodify nopeer noquery notrap
#restrict 2.pool.ntp.org nomodify nopeer noquery notrap
#
# The following settings allow unrestricted access from the localhost
restrict 127.0.0.1
restrict ::1

#
# If a server loses sync with all upstream servers, NTP clients
# no longer follow that server. The local clock can be configured
# to provide a time source when this happens, but it should usually
# be configured on just one server on a network. For more details see
# http://support.ntp.org/bin/view/Support/UndisciplinedLocalClock
# The use of Orphan Mode may be preferable.
#
#server 127.127.1.0
#fudge 127.127.1.0 stratum 10

# See http://support.ntp.org/bin/view/Support/ConfiguringNTP#Section_6.14.
# for documentation regarding leapfile. Updates to the file can be obtained
# from ftp://time.nist.gov/pub/ or ftp://tycho.usno.navy.mil/pub/ntp/.
# Use either leapfile in /etc/ntp or periodically updated leapfile in /var/db.
#leapfile "/etc/ntp/leap-seconds"
leapfile "/var/db/ntpd.leap-seconds.list"

# Specify the number of megabytes of memory that should be allocated and
# locked. -1 (default) means "do not lock the process into memory".
# 0 means "lock whatever memory the process wants into memory". Any other
# number means to lock up to that number of megabytes into memory.
# 0 may result in a segfault when ASLR with stack gap randomization
# is enabled.
#rlimit memlock 32

./old-debian12/etc/cloud/templates/ntp.conf.opensuse.tmpl

## template:jinja

##
## Radio and modem clocks by convention have addresses in the 
## form 127.127.t.u, where t is the clock type and u is a unit 
## number in the range 0-3. 
##
## Most of these clocks require support in the form of a 
## serial port or special bus peripheral. The particular  
## device is normally specified by adding a soft link 
## /dev/device-u to the particular hardware device involved, 
## where u correspond to the unit number above. 
## 
## Generic DCF77 clock on serial port (Conrad DCF77)
## Address:     127.127.8.u
## Serial Port: /dev/refclock-u
##  
## (create soft link /dev/refclock-0 to the particular ttyS?)
##
# server 127.127.8.0 mode 5 prefer

##
## Undisciplined Local Clock. This is a fake driver intended for backup
## and when no outside source of synchronized time is available.
##
# server 127.127.1.0		# local clock (LCL)
# fudge  127.127.1.0 stratum 10	# LCL is unsynchronized

##
## Add external Servers using
## # rcntpd addserver <yourserver>
## The servers will only be added to the currently running instance, not
## to /etc/ntp.conf.
##
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}

# Access control configuration; see /usr/share/doc/packages/ntp/html/accopt.html for
# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
# might also be helpful.
#
# Note that "restrict" applies to both servers and clients, so a configuration
# that might be intended to block requests from certain clients could also end
# up blocking replies from your own upstream servers.

# By default, exchange time with everybody, but don't allow configuration.
restrict -4 default notrap nomodify nopeer noquery
restrict -6 default notrap nomodify nopeer noquery

# Local users may interrogate the ntp server more closely.
restrict 127.0.0.1
restrict ::1

# Clients from this (example!) subnet have unlimited access, but only if
# cryptographically authenticated.
#restrict 192.168.123.0 mask 255.255.255.0 notrust

##
## Miscellaneous stuff
##

driftfile /var/lib/ntp/drift/ntp.drift # path for drift file

logfile   /var/log/ntp		# alternate log file
# logconfig =syncstatus + sysevents
# logconfig =all

# statsdir /tmp/		# directory for statistics files
# filegen peerstats  file peerstats  type day enable
# filegen loopstats  file loopstats  type day enable
# filegen clockstats file clockstats type day enable

#
# Authentication stuff
#
keys /etc/ntp.keys		# path for keys file
trustedkey 1			# define trusted keys
requestkey 1			# key (7) for accessing server variables
controlkey 1			# key (6) for accessing server variables

./old-debian12/etc/cloud/templates/ntp.conf.photon.tmpl

## template:jinja

# For more information about this file, see the man pages
# ntp.conf(5), ntp_acc(5), ntp_auth(5), ntp_clock(5), ntp_misc(5), ntp_mon(5).

driftfile /var/lib/ntp/drift

# Permit time synchronization with our time source, but do not
# permit the source to query or modify the service on this system.
restrict default kod nomodify notrap nopeer noquery
restrict -6 default kod nomodify notrap nopeer noquery

# Permit all access over the loopback interface.  This could
# be tightened as well, but to do so would effect some of
# the administrative functions.
restrict 127.0.0.1
restrict -6 ::1

# Hosts on local network are less restricted.
#restrict 192.168.1.0 mask 255.255.255.0 nomodify notrap

# Use public servers from the pool.ntp.org project.
# Please consider joining the pool (http://www.pool.ntp.org/join.html).
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}

#broadcast 192.168.1.255 autokey	# broadcast server
#broadcastclient			# broadcast client
#broadcast 224.0.1.1 autokey		# multicast server
#multicastclient 224.0.1.1		# multicast client
#manycastserver 239.255.254.254		# manycast server
#manycastclient 239.255.254.254 autokey # manycast client

# Enable public key cryptography.
#crypto

includefile /etc/ntp/crypto/pw

# Key file containing the keys and key identifiers used when operating
# with symmetric key cryptography.
keys /etc/ntp/keys

# Specify the key identifiers which are trusted.
#trustedkey 4 8 42

# Specify the key identifier to use with the ntpdc utility.
#requestkey 8

# Specify the key identifier to use with the ntpq utility.
#controlkey 8

# Enable writing of statistics records.
#statistics clockstats cryptostats loopstats peerstats

./old-debian12/etc/cloud/templates/ntp.conf.rhel.tmpl

## template:jinja

# For more information about this file, see the man pages
# ntp.conf(5), ntp_acc(5), ntp_auth(5), ntp_clock(5), ntp_misc(5), ntp_mon(5).

driftfile /var/lib/ntp/drift

# Permit time synchronization with our time source, but do not
# permit the source to query or modify the service on this system.
restrict default kod nomodify notrap nopeer noquery
restrict -6 default kod nomodify notrap nopeer noquery

# Permit all access over the loopback interface.  This could
# be tightened as well, but to do so would effect some of
# the administrative functions.
restrict 127.0.0.1 
restrict -6 ::1

# Hosts on local network are less restricted.
#restrict 192.168.1.0 mask 255.255.255.0 nomodify notrap

# Use public servers from the pool.ntp.org project.
# Please consider joining the pool (http://www.pool.ntp.org/join.html).
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}

#broadcast 192.168.1.255 autokey	# broadcast server
#broadcastclient			# broadcast client
#broadcast 224.0.1.1 autokey		# multicast server
#multicastclient 224.0.1.1		# multicast client
#manycastserver 239.255.254.254		# manycast server
#manycastclient 239.255.254.254 autokey # manycast client

# Enable public key cryptography.
#crypto

includefile /etc/ntp/crypto/pw

# Key file containing the keys and key identifiers used when operating
# with symmetric key cryptography. 
keys /etc/ntp/keys

# Specify the key identifiers which are trusted.
#trustedkey 4 8 42

# Specify the key identifier to use with the ntpdc utility.
#requestkey 8

# Specify the key identifier to use with the ntpq utility.
#controlkey 8

# Enable writing of statistics records.
#statistics clockstats cryptostats loopstats peerstats

./old-debian12/etc/cloud/templates/ntp.conf.sles.tmpl

## template:jinja

##
## Radio and modem clocks by convention have addresses in the 
## form 127.127.t.u, where t is the clock type and u is a unit 
## number in the range 0-3. 
##
## Most of these clocks require support in the form of a 
## serial port or special bus peripheral. The particular  
## device is normally specified by adding a soft link 
## /dev/device-u to the particular hardware device involved, 
## where u correspond to the unit number above. 
## 
## Generic DCF77 clock on serial port (Conrad DCF77)
## Address:     127.127.8.u
## Serial Port: /dev/refclock-u
##  
## (create soft link /dev/refclock-0 to the particular ttyS?)
##
# server 127.127.8.0 mode 5 prefer

##
## Undisciplined Local Clock. This is a fake driver intended for backup
## and when no outside source of synchronized time is available.
##
# server 127.127.1.0		# local clock (LCL)
# fudge  127.127.1.0 stratum 10	# LCL is unsynchronized

##
## Add external Servers using
## # rcntpd addserver <yourserver>
## The servers will only be added to the currently running instance, not
## to /etc/ntp.conf.
##
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}

# Access control configuration; see /usr/share/doc/packages/ntp/html/accopt.html for
# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
# might also be helpful.
#
# Note that "restrict" applies to both servers and clients, so a configuration
# that might be intended to block requests from certain clients could also end
# up blocking replies from your own upstream servers.

# By default, exchange time with everybody, but don't allow configuration.
restrict -4 default notrap nomodify nopeer noquery
restrict -6 default notrap nomodify nopeer noquery

# Local users may interrogate the ntp server more closely.
restrict 127.0.0.1
restrict ::1

# Clients from this (example!) subnet have unlimited access, but only if
# cryptographically authenticated.
#restrict 192.168.123.0 mask 255.255.255.0 notrust

##
## Miscellaneous stuff
##

driftfile /var/lib/ntp/drift/ntp.drift # path for drift file

logfile   /var/log/ntp		# alternate log file
# logconfig =syncstatus + sysevents
# logconfig =all

# statsdir /tmp/		# directory for statistics files
# filegen peerstats  file peerstats  type day enable
# filegen loopstats  file loopstats  type day enable
# filegen clockstats file clockstats type day enable

#
# Authentication stuff
#
keys /etc/ntp.keys		# path for keys file
trustedkey 1			# define trusted keys
requestkey 1			# key (7) for accessing server variables
controlkey 1			# key (6) for accessing server variables

./old-debian12/etc/cloud/templates/ntp.conf.ubuntu.tmpl

## template:jinja

# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help

driftfile /var/lib/ntp/ntp.drift

# Enable this if you want statistics to be logged.
#statsdir /var/log/ntpstats/

statistics loopstats peerstats clockstats
filegen loopstats file loopstats type day enable
filegen peerstats file peerstats type day enable
filegen clockstats file clockstats type day enable

# Specify one or more NTP servers.

# Use servers from the NTP Pool Project. Approved by Ubuntu Technical Board
# on 2011-02-08 (LP: #104525). See http://www.pool.ntp.org/join.html for
# more information.
{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
pool {{pool}} iburst
{% endfor %}
{%- if servers %}# servers
{% endif %}
{% for server in servers -%}
server {{server}} iburst
{% endfor %}

# Use Ubuntu's ntp server as a fallback.
# pool ntp.ubuntu.com

# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
# might also be helpful.
#
# Note that "restrict" applies to both servers and clients, so a configuration
# that might be intended to block requests from certain clients could also end
# up blocking replies from your own upstream servers.

# By default, exchange time with everybody, but don't allow configuration.
restrict -4 default kod notrap nomodify nopeer noquery limited
restrict -6 default kod notrap nomodify nopeer noquery limited

# Local users may interrogate the ntp server more closely.
restrict 127.0.0.1
restrict ::1

# Needed for adding pool entries
restrict source notrap nomodify noquery

# Clients from this (example!) subnet have unlimited access, but only if
# cryptographically authenticated.
#restrict 192.168.123.0 mask 255.255.255.0 notrust


# If you want to provide time to your local subnet, change the next line.
# (Again, the address is an example only.)
#broadcast 192.168.123.255

# If you want to listen to time broadcasts on your local subnet, de-comment the
# next lines.  Please do this only if you trust everybody on the network!
#disable auth
#broadcastclient

#Changes recquired to use pps synchonisation as explained in documentation:
#http://www.ntp.org/ntpfaq/NTP-s-config-adv.htm#AEN3918

#server 127.127.8.1 mode 135 prefer    # Meinberg GPS167 with PPS
#fudge 127.127.8.1 time1 0.0042        # relative to PPS for my hardware

#server 127.127.22.1                   # ATOM(PPS)
#fudge 127.127.22.1 flag3 1            # enable PPS API

./old-debian12/etc/cloud/templates/ntpd.conf.openbsd.tmpl

## template:jinja

# $OpenBSD: ntpd.conf,v 1.16 2019/11/06 19:04:12 deraadt Exp $
#
# See ntpd.conf(5) and /etc/examples/ntpd.conf

{% if pools %}# pools
{% endif %}
{% for pool in pools -%}
servers {{pool}}
{% endfor %}
{% for server in servers -%}# servers
server {{server}}
{% endfor %}
sensor *

constraint from "9.9.9.9"              # quad9 v4 without DNS
constraint from "2620:fe::fe"          # quad9 v6 without DNS
constraints from "www.google.com"      # intentionally not 8.8.8.8

./old-debian12/etc/cloud/templates/resolv.conf.tmpl

## template:jinja
# Your system has been configured with 'manage-resolv-conf' set to true.
# As a result, cloud-init has written this file with configuration data
# that it has been provided. Cloud-init, by default, will write this file
# a single time (PER_ONCE).
#
{% if nameservers is defined %}
{% for server in nameservers %}
nameserver {{server}}
{% endfor %}

{% endif -%}
{% if searchdomains is defined %}
search {% for search in searchdomains %}{{search}} {% endfor %}

{% endif %}
{% if domain is defined %}
domain {{domain}}
{% endif %}
{% if sortlist is defined %}

sortlist {% for sort in sortlist %}{{sort}} {% endfor %}
{% endif %}
{#
    Flags and options are required to be on the
    same line preceded by "options" keyword
#}
{% if options or flags %}

options
{%- for flag in flags %}
 {{flag-}}
{% endfor %}

{%- for key, value in options.items()|sort %}
 {{key}}:{{value-}}
{% endfor %}
{% endif %}

./old-debian12/etc/cloud/templates/sources.list.debian.tmpl

## template:jinja
## Note, this file is written by cloud-init on first boot of an instance
## modifications made here will not survive a re-bundle.
## if you wish to make changes you can:
## a.) add 'apt_preserve_sources_list: true' to /etc/cloud/cloud.cfg
##     or do the same in user-data
## b.) add sources in /etc/apt/sources.list.d
## c.) make changes to template file /etc/cloud/templates/sources.list.debian.tmpl
###

# See http://www.debian.org/releases/stable/i386/release-notes/ch-upgrading.html
# for how to upgrade to newer versions of the distribution.
deb {{mirror}} {{codename}} main
deb-src {{mirror}} {{codename}} main

## Major bug fix updates produced after the final release of the
## distribution.
deb {{security}} {{codename}}{% if codename in ('buster', 'stretch') %}/updates{% else %}-security{% endif %} main
deb-src {{security}} {{codename}}{% if codename in ('buster', 'stretch') %}/updates{% else %}-security{% endif %} main
deb {{mirror}} {{codename}}-updates main
deb-src {{mirror}} {{codename}}-updates main

## Uncomment the following two lines to add software from the 'backports'
## repository.
## 
## N.B. software from this repository may not have been tested as
## extensively as that contained in the main release, although it includes
## newer versions of some applications which may provide useful features.
deb {{mirror}} {{codename}}-backports main
deb-src {{mirror}} {{codename}}-backports main

./old-debian12/etc/cloud/templates/sources.list.ubuntu.tmpl

## template:jinja
## Note, this file is written by cloud-init on first boot of an instance
## modifications made here will not survive a re-bundle.
## if you wish to make changes you can:
## a.) add 'apt_preserve_sources_list: true' to /etc/cloud/cloud.cfg
##     or do the same in user-data
## b.) add sources in /etc/apt/sources.list.d
## c.) make changes to template file /etc/cloud/templates/sources.list.tmpl

# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
deb {{mirror}} {{codename}} main restricted
# deb-src {{mirror}} {{codename}} main restricted

## Major bug fix updates produced after the final release of the
## distribution.
deb {{mirror}} {{codename}}-updates main restricted
# deb-src {{mirror}} {{codename}}-updates main restricted

## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team. Also, please note that software in universe WILL NOT receive any
## review or updates from the Ubuntu security team.
deb {{mirror}} {{codename}} universe
# deb-src {{mirror}} {{codename}} universe
deb {{mirror}} {{codename}}-updates universe
# deb-src {{mirror}} {{codename}}-updates universe

## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team, and may not be under a free licence. Please satisfy yourself as to
## your rights to use the software. Also, please note that software in
## multiverse WILL NOT receive any review or updates from the Ubuntu
## security team.
deb {{mirror}} {{codename}} multiverse
# deb-src {{mirror}} {{codename}} multiverse
deb {{mirror}} {{codename}}-updates multiverse
# deb-src {{mirror}} {{codename}}-updates multiverse

## N.B. software from this repository may not have been tested as
## extensively as that contained in the main release, although it includes
## newer versions of some applications which may provide useful features.
## Also, please note that software in backports WILL NOT receive any review
## or updates from the Ubuntu security team.
deb {{mirror}} {{codename}}-backports main restricted universe multiverse
# deb-src {{mirror}} {{codename}}-backports main restricted universe multiverse

deb {{security}} {{codename}}-security main restricted
# deb-src {{security}} {{codename}}-security main restricted
deb {{security}} {{codename}}-security universe
# deb-src {{security}} {{codename}}-security universe
deb {{security}} {{codename}}-security multiverse
# deb-src {{security}} {{codename}}-security multiverse

./old-debian12/etc/cloud/templates/systemd.resolved.conf.tmpl

## template:jinja
# Your system has been configured with 'manage-resolv-conf' set to true.
# As a result, cloud-init has written this file with configuration data
# that it has been provided. Cloud-init, by default, will write this file
# a single time (PER_ONCE).
#
[Resolve]
LLMNR=false
{% if nameservers is defined %}
DNS={% for server in nameservers %}{{server}} {% endfor %}
{% endif %}

{% if searchdomains is defined %}
Domains={% for search in searchdomains %}{{search}} {% endfor %}
{% endif %}

./old-debian12/etc/cloud/templates/timesyncd.conf.tmpl

## template:jinja
# cloud-init generated file
# See timesyncd.conf(5) for details.

[Time]
{% if servers or pools -%}
NTP={% for host in servers|list + pools|list %}{{ host }} {% endfor -%}
{% endif -%}

./old-debian12/etc/debian_version

12.15

./old-debian12/etc/default/grub

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT=""
GRUB_CMDLINE_LINUX="console=tty0 console=ttyS0,115200 earlyprintk=ttyS0,115200 consoleblank=0"
GRUB_TERMINAL="console serial"
GRUB_SERIAL_COMMAND="serial --speed=115200"

./old-debian12/etc/default/grub.d/10_cloud.cfg

# Use PARTUUID instead of UUID for root=
GRUB_DISABLE_LINUX_UUID=true
GRUB_DISABLE_LINUX_PARTUUID=

./old-debian12/etc/default/grub.d/15_timeout.cfg

GRUB_TIMEOUT=0

./old-debian12/etc/default/grub.d/init-select.cfg

# Work around a bug in the obsolete init-select package which broke
# grub-mkconfig when init-select was removed but not purged.  This file does
# nothing and will be removed in a later release.
#
# See:
#   https://bugs.debian.org/858528
#   https://bugs.debian.org/863801

./old-debian12/etc/dhcp/debug

#
# The purpose of this script is just to show the variables that are
# available to all the scripts in this directory. All these scripts are
# called from dhclient-script, which exports all the variables shown
# before. If you want to debug a problem with your DHCP setup you can
# enable this script and take a look at /tmp/dhclient-script.debug.

# To enable this script set the following variable to "yes"
RUN="no"

if [ "$RUN" = "yes" ]; then
	echo "$(date): entering ${1%/*}, dumping variables." \
		>> /tmp/dhclient-script.debug

	# loop over the 4 possible prefixes: (empty), cur_, new_, old_
	for prefix in '' 'cur_' 'new_' 'old_'; do
		# loop over the DHCP variables passed to dhclient-script
		for basevar in reason interface medium alias_ip_address \
			       ip_address host_name network_number subnet_mask \
			       broadcast_address routers static_routes \
			       rfc3442_classless_static_routes \
			       domain_name domain_search domain_name_servers \
			       netbios_name_servers netbios_scope \
			       ntp_servers \
			       ip6_address ip6_prefix ip6_prefixlen \
			       dhcp6_domain_search dhcp6_name_servers ; do
			var="${prefix}${basevar}"
			eval "content=\$$var"

			# show only variables with values set
			if [ -n "${content}" ]; then
				echo "$var='${content}'" >> /tmp/dhclient-script.debug
			fi
		done
	done

	echo '--------------------------' >> /tmp/dhclient-script.debug
fi

./old-debian12/etc/dhcp/dhclient-exit-hooks.d/hook-dhclient

#!/bin/sh
# This file is part of cloud-init. See LICENSE file for license information.

# This script writes DHCP lease information into the cloud-init run directory
# It is sourced, not executed.  For more information see dhclient-script(8).

is_azure() {
    local dmi_path="/sys/class/dmi/id/board_vendor" vendor=""
    if [ -e "$dmi_path" ] && read vendor < "$dmi_path"; then
        [ "$vendor" = "Microsoft Corporation" ] && return 0
    fi
    return 1
}

is_enabled() {
    # only execute hooks if cloud-init is enabled and on azure
    [ -e /run/cloud-init/enabled ] || return 1
    is_azure
}

if is_enabled; then
   case "$reason" in
      BOUND) cloud-init dhclient-hook up "$interface";;
      DOWN|RELEASE|REBOOT|STOP|EXPIRE)
         cloud-init dhclient-hook down "$interface";;
   esac
fi

./old-debian12/etc/dhcp/dhclient-exit-hooks.d/rfc3442-classless-routes

# set classless routes based on the format specified in RFC3442
# e.g.:
#   new_rfc3442_classless_static_routes='24 192 168 10 192 168 1 1 8 10 10 17 66 41'
# specifies the routes:
#   192.168.10.0/24 via 192.168.1.1
#   10.0.0.0/8 via 10.10.17.66.41

RUN="yes"


if [ "$RUN" = "yes" ]; then
	if [ -n "$new_rfc3442_classless_static_routes" ]; then
		if [ "$reason" = "BOUND" ] || [ "$reason" = "REBOOT" ]; then

			set -- $new_rfc3442_classless_static_routes

			while [ $# -gt 0 ]; do
				net_length=$1
				via_arg=''

				case $net_length in
					32|31|30|29|28|27|26|25)
						if [ $# -lt 9 ]; then
							return 1
						fi
						net_address="${2}.${3}.${4}.${5}"
						gateway="${6}.${7}.${8}.${9}"
						shift 9
						;;
					24|23|22|21|20|19|18|17)
						if [ $# -lt 8 ]; then
							return 1
						fi
						net_address="${2}.${3}.${4}.0"
						gateway="${5}.${6}.${7}.${8}"
						shift 8
						;;
					16|15|14|13|12|11|10|9)
						if [ $# -lt 7 ]; then
							return 1
						fi
						net_address="${2}.${3}.0.0"
						gateway="${4}.${5}.${6}.${7}"
						shift 7
						;;
					8|7|6|5|4|3|2|1)
						if [ $# -lt 6 ]; then
							return 1
						fi
						net_address="${2}.0.0.0"
						gateway="${3}.${4}.${5}.${6}"
						shift 6
						;;
					0)	# default route
						if [ $# -lt 5 ]; then
							return 1
						fi
						net_address="0.0.0.0"
						gateway="${2}.${3}.${4}.${5}"
						shift 5
						;;
					*)	# error
						return 1
						;;
				esac

				# take care of link-local routes
				if [ "${gateway}" != '0.0.0.0' ]; then
					via_arg="via ${gateway}"
				fi

				# set route (ip detects host routes automatically)
				ip -4 route add "${net_address}/${net_length}" \
					${via_arg} dev "${interface}" >/dev/null 2>&1
			done
		fi
	fi
fi

./old-debian12/etc/dhcp/dhclient-exit-hooks.d/timesyncd

TIMESYNCD_CONF=/run/systemd/timesyncd.conf.d/01-dhclient.conf

timesyncd_servers_setup_remove() {
        if [ ! -d /run/systemd/system ]; then
                return
        fi
        if [ ! -x /lib/systemd/systemd-timesyncd ]; then
                return
        fi

        if [ -e $TIMESYNCD_CONF ]; then
                rm -f $TIMESYNCD_CONF
                systemctl try-restart systemd-timesyncd.service || true
        fi
}

timesyncd_servers_setup_add() {
        if [ ! -d /run/systemd/system ]; then
                return
        fi
        if [ ! -x /lib/systemd/systemd-timesyncd ]; then
                return
        fi

        if [ -e $TIMESYNCD_CONF ] && [ "$new_ntp_servers" = "$old_ntp_servers" ]; then
                return
        fi

        if [ -z "$new_ntp_servers" ]; then
                timesyncd_servers_setup_remove
                return
        fi

        mkdir -p $(dirname $TIMESYNCD_CONF)
        cat <<EOF > ${TIMESYNCD_CONF}.new
# NTP server entries received from DHCP server
[Time]
NTP=$new_ntp_servers
EOF
        mv ${TIMESYNCD_CONF}.new ${TIMESYNCD_CONF}
        systemctl try-restart systemd-timesyncd.service || true
}


case $reason in
        BOUND|RENEW|REBIND|REBOOT)
                timesyncd_servers_setup_add
                ;;
        EXPIRE|FAIL|RELEASE|STOP)
                timesyncd_servers_setup_remove
                ;;
esac

./old-debian12/etc/dhcp/dhclient.conf

# Configuration file for /sbin/dhclient.
#
# This is a sample configuration file for dhclient. See dhclient.conf's
#	man page for more information about the syntax of this file
#	and a more comprehensive list of the parameters understood by
#	dhclient.
#
# Normally, if the DHCP server provides reasonable information and does
#	not leave anything out (like the domain name, for example), then
#	few changes must be made to this file, if any.
#

option rfc3442-classless-static-routes code 121 = array of unsigned integer 8;

send host-name = gethostname();
request subnet-mask, broadcast-address, time-offset, routers,
	domain-name, domain-name-servers, domain-search, host-name,
	dhcp6.name-servers, dhcp6.domain-search, dhcp6.fqdn, dhcp6.sntp-servers,
	netbios-name-servers, netbios-scope, interface-mtu,
	rfc3442-classless-static-routes, ntp-servers;

#send dhcp-client-identifier 1:0:a0:24:ab:fb:9c;
#send dhcp-lease-time 3600;
#supersede domain-name "fugue.com home.vix.com";
#prepend domain-name-servers 127.0.0.1;
#require subnet-mask, domain-name-servers;
#timeout 60;
#retry 60;
#reboot 10;
#select-timeout 5;
#initial-interval 2;
#script "/sbin/dhclient-script";
#media "-link0 -link1 -link2", "link0 link1";
#reject 192.33.137.209;

#alias {
#  interface "eth0";
#  fixed-address 192.5.5.213;
#  option subnet-mask 255.255.255.255;
#}

#lease {
#  interface "eth0";
#  fixed-address 192.33.137.200;
#  medium "link0 link1";
#  option host-name "andare.swiftmedia.com";
#  option subnet-mask 255.255.255.0;
#  option broadcast-address 192.33.137.255;
#  option routers 192.33.137.250;
#  option domain-name-servers 127.0.0.1;
#  renew 2 2000/1/12 00:00:01;
#  rebind 2 2000/1/12 00:00:01;
#  expire 2 2000/1/12 00:00:01;
#}

./old-debian12/etc/fstab

PARTUUID=ee829b50-dbb1-4461-a46b-5fc08bfe425d / ext4 rw,discard,errors=remount-ro,x-systemd.growfs 0 1
PARTUUID=ccd36580-fca6-4e71-886d-2c5bc9d728b7 /boot/efi vfat defaults 0 0

./old-debian12/etc/hostname

NextCloudBackup

./old-debian12/etc/hosts

# Your system has configured 'manage_etc_hosts' as True.
# As a result, if you wish for changes to this file to persist
# then you will need to either
# a.) make changes to the master file in /etc/cloud/templates/hosts.debian.tmpl
# b.) change or remove the value of 'manage_etc_hosts' in
#     /etc/cloud/cloud.cfg or cloud-config from user-data
#
127.0.1.1 vmi2936396.contaboserver.net vmi2936396
127.0.0.1 localhost

# The following lines are desirable for IPv6 capable hosts
::1 localhost ip6-localhost ip6-loopback
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters

./old-debian12/etc/initramfs-tools/initramfs.conf

#
# initramfs.conf
# Configuration file for mkinitramfs(8). See initramfs.conf(5).
#
# Note that configuration options from this file can be overridden
# by config files in the /etc/initramfs-tools/conf.d directory.

#
# MODULES: [ most | netboot | dep | list ]
#
# most - Add most filesystem and all harddrive drivers.
#
# dep - Try and guess which modules to load.
#
# netboot - Add the base modules, network modules, but skip block devices.
#
# list - Only include modules from the 'additional modules' list
#

MODULES=most

#
# BUSYBOX: [ y | n | auto ]
#
# Use busybox shell and utilities.  If set to n, klibc utilities will be used.
# If set to auto (or unset), busybox will be used if installed and klibc will
# be used otherwise.
#

BUSYBOX=auto

#
# KEYMAP: [ y | n ]
#
# Load a keymap during the initramfs stage.
#

KEYMAP=n

#
# COMPRESS: [ gzip | bzip2 | lz4 | lzma | lzop | xz | zstd ]
#

COMPRESS=zstd

#
# COMPRESSLEVEL: ...
#
# Set a compression level for the compressor.
# Defaults vary by compressor.
#
# Valid values are:
# 1 -  9 for gzip|bzip2|lzma|lzop
# 0 -  9 for  lz4|xz
# 0 - 19 for zstd
#
# COMPRESSLEVEL=3

#
# DEVICE: ...
#
# Specify a specific network interface, like eth0
# Overridden by optional ip= or BOOTIF= bootarg
#

DEVICE=

#
# NFSROOT: [ auto | HOST:MOUNT ]
#

NFSROOT=auto

#
# RUNSIZE: ...
#
# The size of the /run tmpfs mount point, like 256M or 10%
# Overridden by optional initramfs.runsize= bootarg
#

RUNSIZE=10%

#
# FSTYPE: ...
#
# The filesystem type(s) to support, or "auto" to use the current root
# filesystem type
#

FSTYPE=auto

./old-debian12/etc/initramfs-tools/modules

# List of modules that you want to include in your initramfs.
# They will be loaded at boot time in the order below.
#
# Syntax:  module_name [args ...]
#
# You must run update-initramfs(8) to effect this change.
#
# Examples:
#
# raid1
# sd_mod
zfs

./old-debian12/etc/initramfs-tools/update-initramfs.conf

#
# Configuration file for update-initramfs(8)
#

#
# update_initramfs [ yes | all | no ]
#
# Default is yes
# If set to all update-initramfs will update all initramfs
# If set to no disables any update to initramfs beside kernel upgrade

update_initramfs=yes

#
# backup_initramfs [ yes | no ]
#
# Default is no
# If set to no leaves no .bak backup files.

backup_initramfs=no

./old-debian12/etc/modprobe.d/blacklist.conf

blacklist pcspkr
blacklist floppy

./old-debian12/etc/modprobe.d/dkms.conf

# modprobe information used for DKMS modules
#
# This is a stub file, should be edited when needed,
# used by default by DKMS.

./old-debian12/etc/modules

# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
# Parameters can be specified after the module name.

./old-debian12/etc/modules-load.d/zfs.conf

zfs

./old-debian12/etc/netplan/50-cloud-init.yaml

# This file is generated from information provided by the datasource.  Changes
# to it will not persist across an instance reboot.  To disable cloud-init's
# network configuration capabilities, write a file
# /etc/cloud/cloud.cfg.d/99-disable-network-config.cfg with the following:
# network: {config: disabled}
network:
    version: 2
    ethernets:
        eth0:
            addresses:
            - 109.199.123.73/20
            - 2a02:c207:2293:6396:0000:0000:0000:0001/64
            gateway4: 109.199.112.1
            gateway6: fe80::1
            match:
                macaddress: 00:50:56:5e:95:7b
            nameservers:
                addresses:
                - 213.136.95.10
                - 213.136.95.11
                - 2a02:c207::1:53
                search: []
            set-name: eth0

./old-debian12/etc/network/if-pre-up.d/ethtool

#!/bin/sh

ETHTOOL=/sbin/ethtool

test -x $ETHTOOL || exit 0

[ "$IFACE" != "lo" ] || exit 0

# Gather together the mixed bag of settings applied with -s/--change
SETTINGS="\
${IF_ETHERNET_PORT:+ port $IF_ETHERNET_PORT}\
${IF_DRIVER_MESSAGE_LEVEL:+ msglvl $IF_DRIVER_MESSAGE_LEVEL}\
"
[ -z "$SETTINGS" ] || $ETHTOOL --change "$IFACE" $SETTINGS

./old-debian12/etc/network/if-up.d/ethtool

#!/bin/sh

ETHTOOL=/sbin/ethtool

test -x $ETHTOOL || exit 0

[ "$IFACE" != "lo" ] || exit 0

# Find settings with a given prefix and print them as they appeared in
# /etc/network/interfaces, only with the prefix removed.
# This actually prints each name and value on a separate line, but that
# doesn't matter to the shell.
gather_settings () {
    set | sed -n "
/^IF_$1[A-Za-z0-9_]*=/ {
    h;                             # hold line
    s/^IF_$1//; s/=.*//; s/_/-/g;  # get name without prefix
    y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/;  # lower-case
    p;
    g;                             # restore line
    s/^[^=]*=//; s/^'\(.*\)'/\1/;  # get value
    p;
}"
}

# Gather together the mixed bag of settings applied with -s/--change
SETTINGS="\
${IF_LINK_SPEED:+ speed $IF_LINK_SPEED}\
${IF_LINK_DUPLEX:+ duplex $IF_LINK_DUPLEX}\
"

# WOL has an optional pass-key
set -- $IF_ETHERNET_WOL
SETTINGS="$SETTINGS${1:+ wol $1}${2:+ sopass $2}"

# Autonegotiation can be on|off or an advertising mask
case "$IF_ETHERNET_AUTONEG" in
'')	;;
on|off)	SETTINGS="$SETTINGS autoneg $IF_ETHERNET_AUTONEG" ;;
*)	SETTINGS="$SETTINGS autoneg on advertise $IF_ETHERNET_AUTONEG" ;;
esac

[ -z "$SETTINGS" ] || $ETHTOOL --change "$IFACE" $SETTINGS

SETTINGS="$(gather_settings ETHERNET_PAUSE_)"
[ -z "$SETTINGS" ] || $ETHTOOL --pause "$IFACE" $SETTINGS

SETTINGS="$(gather_settings HARDWARE_IRQ_COALESCE_)"
[ -z "$SETTINGS" ] || $ETHTOOL --coalesce "$IFACE" $SETTINGS

SETTINGS="$(gather_settings HARDWARE_DMA_RING_)"
[ -z "$SETTINGS" ] || $ETHTOOL --set-ring "$IFACE" $SETTINGS

SETTINGS="$(gather_settings OFFLOAD_)"
[ -z "$SETTINGS" ] || $ETHTOOL --offload "$IFACE" $SETTINGS

./old-debian12/etc/resolv.conf

# Managed by update.sh
nameserver 209.126.15.53
nameserver 195.179.224.53
nameserver 2a02:c202:5028::53
nameserver 2605:a140:5028::53

./old-debian12/etc/systemd/system/sshd-keygen@.service.d/disable-sshd-keygen-if-cloud-init-active.conf

# In some cloud-init enabled images the sshd-keygen template service may race
# with cloud-init during boot causing issues with host key generation.  This
# drop-in config adds a condition to sshd-keygen@.service if it exists and
# prevents the sshd-keygen units from running *if* cloud-init is going to run.
#
[Unit]
ConditionPathExists=!/run/systemd/generator.early/multi-user.target.wants/cloud-init.target

./old-debian12/etc/systemd/system/syncthing.service

[Unit]
Description=Syncthing for www-data
After=network.target

[Service]
User=www-data
Group=www-data
ExecStart=/usr/bin/syncthing serve --no-browser --home=/var/lib/syncthing
Restart=on-failure
ProtectSystem=full
ProtectHome=true

[Install]
WantedBy=multi-user.target

./old-debian12/system-info.txt

Source root: /oldsda1

OS release:

Network packages:
Package: cloud-init
Status: install ok installed
Version: 22.4.2-1+deb12u4

Package: cloud-initramfs-growroot
Status: install ok installed
Version: 0.18.debian13+deb12u1

Package: isc-dhcp-client
Status: install ok installed
Version: 4.4.3-P1-2

Package: netplan.io
Status: install ok installed
Version: 0.106-2+deb12u1


Network-related service links:
/oldsda1/etc/systemd/system/dbus-org.freedesktop.network1.service -> 
/oldsda1/etc/systemd/system/multi-user.target.wants/systemd-networkd.service -> 
/oldsda1/etc/systemd/system/network-online.target.wants/systemd-networkd-wait-online.service -> 
/oldsda1/etc/systemd/system/sysinit.target.wants/systemd-network-generator.service -> 
/oldsda1/etc/systemd/system/sysinit.target.wants/systemd-resolved.service -> 
/oldsda1/etc/systemd/system/sockets.target.wants/systemd-networkd.socket -> 
/oldsda1/etc/systemd/system/cloud-init.target.wants/cloud-final.service -> 
/oldsda1/etc/systemd/system/cloud-init.target.wants/cloud-config.service -> 
/oldsda1/etc/systemd/system/cloud-init.target.wants/cloud-init.service -> 
/oldsda1/etc/systemd/system/cloud-init.target.wants/cloud-init-hotplugd.socket -> 
/oldsda1/etc/systemd/system/cloud-init.target.wants/cloud-init-local.service -> 

./old-debian12/var/lib/dpkg/status

Package: adduser
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 686
Maintainer: Debian Adduser Developers <adduser@packages.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 3.134
Depends: passwd
Suggests: liblocale-gettext-perl, perl, cron, quota
Conffiles:
 /etc/adduser.conf cc3493ecd2d09837ffdcc3e25fdfff18
 /etc/deluser.conf 11a06baf8245fd8d690b99024d228c1f
Description: add and remove users and groups
 This package includes the 'adduser' and 'deluser' commands for creating
 and removing users.
 .
  - 'adduser' creates new users and groups and adds existing users to
    existing groups;
  - 'deluser' removes users and groups and removes users from a given
    group.
 .
 Adding users with 'adduser' is much easier than adding them manually.
 'Adduser' will choose UID and GID values that conform to Debian policy,
 create a home directory, copy skeletal user configuration, and
 automate setting initial values for the user's password, real name
 and so on.
 .
 'Deluser' can back up and remove users' home directories
 and mail spool or all the files they own on the system.
 .
 A custom script can be executed after each of the commands.
 .
 'Adduser' and 'Deluser' are intended to be used by the local
 administrator in lieu of the tools from the 'useradd' suite, and
 they provide support for easy use from Debian package maintainer
 scripts, functioning as kind of a policy layer to make those scripts
 easier and more stable to write and maintain.

Package: alsa-topology-conf
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 420
Maintainer: Debian ALSA Maintainers <pkg-alsa-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.2.5.1-2
Replaces: libasound2-data (<< 1.2.1)
Breaks: libasound2-data (<< 1.2.1)
Enhances: libasound2-data
Description: ALSA topology configuration files
 This package contains ALSA topology configuration files that can be used
 by libasound2 for specific audio hardware.
 .
 ALSA is the Advanced Linux Sound Architecture.
Homepage: https://www.alsa-project.org/

Package: alsa-ucm-conf
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 689
Maintainer: Debian ALSA Maintainers <pkg-alsa-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.2.8-1
Depends: libasound2 (>= 1.2.4)
Description: ALSA Use Case Manager configuration files
 This package contains ALSA Use Case Manager configuration of audio
 input/output names and routing for specific audio hardware. They can be
 used with the alsaucm tool.
 .
 ALSA is the Advanced Linux Sound Architecture.
Homepage: https://www.alsa-project.org/

Package: apache2
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 584
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: amd64
Version: 2.4.68-1~deb12u1
Provides: httpd, httpd-cgi
Depends: apache2-bin (= 2.4.68-1~deb12u1), apache2-data (= 2.4.68-1~deb12u1), apache2-utils (= 2.4.68-1~deb12u1), lsb-base, media-types, perl:any, procps
Pre-Depends: init-system-helpers (>= 1.54~)
Recommends: ssl-cert
Suggests: apache2-doc, apache2-suexec-pristine | apache2-suexec-custom, www-browser
Conffiles:
 /etc/apache2/apache2.conf 354c9e6d2b88a0a3e0548f853840674c
 /etc/apache2/conf-available/charset.conf e6fbb8adf631932851d6cc522c1e48d7
 /etc/apache2/conf-available/localized-error-pages.conf f542d267bfce7815f9453eb1476e5f73
 /etc/apache2/conf-available/other-vhosts-access-log.conf 2cad303fc4221d6b0068a8b37597b9fb
 /etc/apache2/conf-available/security.conf 332668933023a463046fa90d9b057193
 /etc/apache2/conf-available/serve-cgi-bin.conf c146ad61e8853896938a5d30d7aa6c89
 /etc/apache2/envvars e4431a53c868ae0dfcde68564f3ce6a7
 /etc/apache2/magic a6d370833a02f53db6a0a30800704994
 /etc/apache2/mods-available/access_compat.load f7f77b3eb4005749b583ff14b49f8bf1
 /etc/apache2/mods-available/actions.conf aa7020bed65647b011cfb36e8567aa99
 /etc/apache2/mods-available/actions.load 95dcfd2efdd41666de5f31dd72e01e41
 /etc/apache2/mods-available/alias.conf a1632bd99783ef6ca8a47a6005d04d56
 /etc/apache2/mods-available/alias.load 7742296502ce1d2f970cc87322d8ffba
 /etc/apache2/mods-available/allowmethods.load b377b96eb4dddd88f9428d9cc2fd87ea
 /etc/apache2/mods-available/asis.load d1003c9fa12b4d3ed35ea3827a689492
 /etc/apache2/mods-available/auth_basic.load a92c34a3ce5e67e2ecbd272155ebe072
 /etc/apache2/mods-available/auth_digest.load f29d047cd59013e2fa6724d677c7970b
 /etc/apache2/mods-available/auth_form.load 731420a769dd8ad537d68bfdbdd6a506
 /etc/apache2/mods-available/authn_anon.load 03cbe85c698911a3d3235b4855726481
 /etc/apache2/mods-available/authn_core.load c6420ed74b0095f8408aba3e11db4907
 /etc/apache2/mods-available/authn_dbd.load 86e21a672a4f245715a788f9873174ed
 /etc/apache2/mods-available/authn_dbm.load 4e37546871dbcba8550a0d781f6fbfa8
 /etc/apache2/mods-available/authn_file.load ecdeeab8cfec4a9dd0c065a4d6948c31
 /etc/apache2/mods-available/authn_socache.load 260e21e1eb5caa7bcabe8a2fae11445f
 /etc/apache2/mods-available/authnz_fcgi.load b12a39427b0b3a8d2ffb03cfc029da18
 /etc/apache2/mods-available/authnz_ldap.load d65845f053d08b82da239c73c9094c35
 /etc/apache2/mods-available/authz_core.load 90ad8f57655bcd98b7b07864736ab954
 /etc/apache2/mods-available/authz_dbd.load c746b8c3bf3fca950ca41fcd553328b4
 /etc/apache2/mods-available/authz_dbm.load 8cd42e62d8ca0701f9aad080ec968493
 /etc/apache2/mods-available/authz_groupfile.load 97a3e14926ce7bf5f2d2a7b93ece648d
 /etc/apache2/mods-available/authz_host.load f529587409471e3feb62256bccaf538a
 /etc/apache2/mods-available/authz_owner.load 9ed1ea15654bb594453438154b642539
 /etc/apache2/mods-available/authz_user.load bcf988f105564ec1e14b78df56a01cd8
 /etc/apache2/mods-available/autoindex.conf 958f2742a80ae30f95507fb84e9eb018
 /etc/apache2/mods-available/autoindex.load b9f9d364f1b4c96c45b6db353180aa15
 /etc/apache2/mods-available/brotli.load da4d337dd726ab27221b06d92c998e36
 /etc/apache2/mods-available/buffer.load ae1e21b4fd2c2e8236ec641cae9814bd
 /etc/apache2/mods-available/cache.load ea99aba14e9aa25c27653b9958239a6e
 /etc/apache2/mods-available/cache_disk.conf 0b2be6d48bbad8b4e32eef623e3670bc
 /etc/apache2/mods-available/cache_disk.load 56ebd9819aa70a7ff8ac04e4922049f2
 /etc/apache2/mods-available/cache_socache.load 4b548216cee2e910e9059e426f81e60c
 /etc/apache2/mods-available/cern_meta.load 2c2d9adcb273f934304e7dfb5775f7b9
 /etc/apache2/mods-available/cgi.load 32a1c48f0e29feb415c9460378728d82
 /etc/apache2/mods-available/cgid.conf d7410fcd5d57c404144ed32e2d5c551f
 /etc/apache2/mods-available/cgid.load c3ee2eac02c248b5a39fb1a7afee4cb9
 /etc/apache2/mods-available/charset_lite.load 1585fcd1b631c2e9b166e170cb162c54
 /etc/apache2/mods-available/data.load b6cc5b9e815f551335596cd1e25ffc34
 /etc/apache2/mods-available/dav.load 2ee48948add72e6b8682d041acbcab7f
 /etc/apache2/mods-available/dav_fs.conf 9d5c750538bf58538c558b907ca924f1
 /etc/apache2/mods-available/dav_fs.load 17f662fd023dbaaab9d89f9a11ae58c1
 /etc/apache2/mods-available/dav_lock.load faad09687e64ebb9670aa0b8095d6642
 /etc/apache2/mods-available/dbd.load f03fe275174a5ed97b0f5f5726ccea60
 /etc/apache2/mods-available/deflate.conf 2f28f35168069262fb1055abab5848fe
 /etc/apache2/mods-available/deflate.load 6a7a23153796456ee919abdf728fd972
 /etc/apache2/mods-available/dialup.load dbc3535a9e5dfd799cf16b5c0d58f137
 /etc/apache2/mods-available/dir.conf 4dbfa06e481b9a2e874247fc8c157c3b
 /etc/apache2/mods-available/dir.load 397aadae1b8b18e3a7a233cf7c297f99
 /etc/apache2/mods-available/dump_io.load 8231c51ef692e0766625ece087484fe4
 /etc/apache2/mods-available/echo.load 226a145f19c43d9f921c35eacfd61cb2
 /etc/apache2/mods-available/env.load 3e8963a7df7c047be50a552d80a4f853
 /etc/apache2/mods-available/expires.load dac64edc06fe538c2edd7b3f1f3b03f1
 /etc/apache2/mods-available/ext_filter.load d3c4acfca1322274a9a8504e8cef27e9
 /etc/apache2/mods-available/file_cache.load f097659127628ec6f9c6a558d0baf566
 /etc/apache2/mods-available/filter.load 8df0170e37a8925238860657d6c60fe5
 /etc/apache2/mods-available/headers.load ba7d09162b65d09397bd58be33138e4d
 /etc/apache2/mods-available/heartbeat.load b78970d35346bfe5eb5817d228cb209c
 /etc/apache2/mods-available/heartmonitor.load b4da13d1c05a7dd1bdeb272300c1fc83
 /etc/apache2/mods-available/http2.conf 5bc6b4b533d920c8b677f3bb37734a0f
 /etc/apache2/mods-available/http2.load e18e0c7e38196e7d7580ecedaaa72e3b
 /etc/apache2/mods-available/ident.load 51ba623a8a2bd71c512f847d02e0934f
 /etc/apache2/mods-available/imagemap.load 51d5109d8bc2bafc17af03beace4d8a4
 /etc/apache2/mods-available/include.load 9cf2fa9ceb6571b5fab4603daad44c83
 /etc/apache2/mods-available/info.conf 1fd47a9adf023a925301c58490417cf9
 /etc/apache2/mods-available/info.load c1faffe40b8bed9f2b817b9dc0503bb6
 /etc/apache2/mods-available/lbmethod_bybusyness.load 094b7c1d424cc4a1dee6f77d301e1888
 /etc/apache2/mods-available/lbmethod_byrequests.load f33d55ab5bbf907340426e31f99f6701
 /etc/apache2/mods-available/lbmethod_bytraffic.load e656d80b48c020b7d77ece23368e04f1
 /etc/apache2/mods-available/lbmethod_heartbeat.load 944703ff299a25cf068de7f6a2374465
 /etc/apache2/mods-available/ldap.conf f1c3882b24335ef261a90696e060813e
 /etc/apache2/mods-available/ldap.load 735ac5f246738e11a53f6c515b8dfc48
 /etc/apache2/mods-available/log_debug.load d062328e5987fa686615394768339abe
 /etc/apache2/mods-available/log_forensic.load 7177e2427eb7c78f1ab10c034a809793
 /etc/apache2/mods-available/lua.load 5e445ce688a49e0a1fcfcaa414fe21f9
 /etc/apache2/mods-available/macro.load 40e0509b4b2d307cdfe4de75fa89dc91
 /etc/apache2/mods-available/md.load 4fa08b541b4bac4a4849e6fd6d69c973
 /etc/apache2/mods-available/mime.conf 5e9b0033f29b5bf2d9e736f7719ef1f9
 /etc/apache2/mods-available/mime.load 9c858dc2ad2825dc3f862ecba90cf6ec
 /etc/apache2/mods-available/mime_magic.conf b0b89da0f5d38b6c7177113018fc475d
 /etc/apache2/mods-available/mime_magic.load ab5c69aa0c91f11157e9bfc4972f8cce
 /etc/apache2/mods-available/mpm_event.conf 157cee0c8592d9e8bbffcd33abac3e2a
 /etc/apache2/mods-available/mpm_event.load 08816d280ebbd94b8c5961fc6f7168b5
 /etc/apache2/mods-available/mpm_prefork.conf 2c7263c7cd86af07dcedf627d0ad2ade
 /etc/apache2/mods-available/mpm_prefork.load 9bcdffe5055526e0929ecd49ee311c9e
 /etc/apache2/mods-available/mpm_worker.conf b57019603bf38326fcb7f9c0785a3c34
 /etc/apache2/mods-available/mpm_worker.load 0c6640977f0f046a55fdaf76eb54adef
 /etc/apache2/mods-available/negotiation.conf b023fc6578d5b64059df4dfe689cb779
 /etc/apache2/mods-available/negotiation.load fd7bf44d833446a35f0199d7cbcc9793
 /etc/apache2/mods-available/proxy.conf a3c7629e7a55080e9c2f4ff1c70a98b2
 /etc/apache2/mods-available/proxy.load 3d3719c88d01152e817f74fc2fd6ce9e
 /etc/apache2/mods-available/proxy_ajp.load e058e03c1d4f9e4d8e2c439ed75cc501
 /etc/apache2/mods-available/proxy_balancer.conf 8a37d3a532dbb4866d4dd58162812f85
 /etc/apache2/mods-available/proxy_balancer.load 9c6e6ff2195159c8af97f7673e8d2ada
 /etc/apache2/mods-available/proxy_connect.load 6bc4b5de977f70a0b6ae98ab04383c0c
 /etc/apache2/mods-available/proxy_express.load f2ad6e7e80d2750cdca5986657e7835e
 /etc/apache2/mods-available/proxy_fcgi.load 09cbda44eecbf1cbab48b30045217e3c
 /etc/apache2/mods-available/proxy_fdpass.load 9e5584db5f748a2fb71b582a255a976e
 /etc/apache2/mods-available/proxy_ftp.conf 12809c2f356d9c05dbdc887375a6bf1b
 /etc/apache2/mods-available/proxy_ftp.load c05db1b229a7957f0032c0d79ed7e3c9
 /etc/apache2/mods-available/proxy_hcheck.load 92898c1ef9124193fa5d9e13408e0372
 /etc/apache2/mods-available/proxy_html.conf 6012bbc4155b99642dba050df6c9028f
 /etc/apache2/mods-available/proxy_html.load dac7646a0a7242de76f788b4da14390b
 /etc/apache2/mods-available/proxy_http.load 161b514c355c6daa95f11371fb9c184c
 /etc/apache2/mods-available/proxy_http2.load 8a2cdbe25537eb8cb9007e351274f852
 /etc/apache2/mods-available/proxy_scgi.load cb11d685e60db26bbdad456263bf63b7
 /etc/apache2/mods-available/proxy_uwsgi.load 37493bab0af283fd186d2797a9f5f95b
 /etc/apache2/mods-available/proxy_wstunnel.load d2e5c21b886333f1662fe74591260d5d
 /etc/apache2/mods-available/ratelimit.load fb40aa030d5458dd99a0c9d1141bcde4
 /etc/apache2/mods-available/reflector.load 306c71fae73733506db9099d106ba642
 /etc/apache2/mods-available/remoteip.load 81a6511c79ab338aef51a6c185152231
 /etc/apache2/mods-available/reqtimeout.conf 30ef0f5bd709e44eeee85e9f847000c0
 /etc/apache2/mods-available/reqtimeout.load 7fd814775dc3f3c9e6753ef874978f96
 /etc/apache2/mods-available/request.load 36c1b324cd545e3e29b50b5e2a8357e8
 /etc/apache2/mods-available/rewrite.load 55e18fb7df64c8f390904b972637c17d
 /etc/apache2/mods-available/sed.load 8ba3c7ff4243e6a45b6e3c372fc0de1b
 /etc/apache2/mods-available/session.load b552f1e184865c597ae397876fb3a0a6
 /etc/apache2/mods-available/session_cookie.load 89aff7a7f8b4347965d4cf6ea3c5beb9
 /etc/apache2/mods-available/session_crypto.load 066002be7d8c6c381553dbded41db1b6
 /etc/apache2/mods-available/session_dbd.load cf86e56f8ee26f5dccc39c2f690d7f79
 /etc/apache2/mods-available/setenvif.conf 5b6b9d2a0448f4c5aec4a5a3454bc77b
 /etc/apache2/mods-available/setenvif.load 6f670fad5b6f6b14fa72c9cd3058469b
 /etc/apache2/mods-available/slotmem_plain.load fd33fcd86c77d4d5044ad904e7f38360
 /etc/apache2/mods-available/slotmem_shm.load 127df94eaf6987ad67b964f01eec3251
 /etc/apache2/mods-available/socache_dbm.load 9f11810517a6bf2eba31b336ebbfad70
 /etc/apache2/mods-available/socache_memcache.load c0101bc50501b12e7c8c74014560404b
 /etc/apache2/mods-available/socache_redis.load 5c6ee35e3b89ea7ffdb19a2b344ada94
 /etc/apache2/mods-available/socache_shmcb.load 9efb84889b8e1683ce104033bf30973d
 /etc/apache2/mods-available/speling.load 095570b0cb18ebdfc357a2241c6932ea
 /etc/apache2/mods-available/ssl.conf e0240208bf5bd725c1f192c2d1abb76e
 /etc/apache2/mods-available/ssl.load 838b292226d2da6ceb3f1c793696ca12
 /etc/apache2/mods-available/status.conf a2068bd13eadd9b0b9168d94e21c37b6
 /etc/apache2/mods-available/status.load 00976ea5115f286bbc21357581d0b65e
 /etc/apache2/mods-available/substitute.load 50e63dc17612e22484a88f537e8aec8e
 /etc/apache2/mods-available/suexec.load 335169c85f4afc14524846789d46af06
 /etc/apache2/mods-available/unique_id.load 6c13959015fb35276572070b44e63380
 /etc/apache2/mods-available/userdir.conf 202509138f19284efb527eff4cfb042a
 /etc/apache2/mods-available/userdir.load c034025405561ea48fbcb67fd1998f4d
 /etc/apache2/mods-available/usertrack.load 8400042dd4374fad5eedf33ffb3c68f0
 /etc/apache2/mods-available/vhost_alias.load fdd42d34966c329cdee2435dfe72ee24
 /etc/apache2/mods-available/xml2enc.load 1f7ab653ed3601bd265871cdf252a224
 /etc/apache2/ports.conf e0eadfd8b9250d90d5c3004171eb78f6
 /etc/apache2/sites-available/000-default.conf 45ed6a20d7ff26b62d873585bc1b42ca
 /etc/apache2/sites-available/default-ssl.conf afeefefbeab0e3b9bb14558f300ec9fc
 /etc/cron.daily/apache2 c788ffaa4c682c91e6a1cd7f53840d62
 /etc/default/apache-htcacheclean ae8721a0bc5b4e2ef7a5258b1e9db5c5
 /etc/init.d/apache-htcacheclean 29fe315052a1c5fbe9dc9f29485ed906
 /etc/init.d/apache2 379d9173b08f87449abc0fbd44926194
 /etc/logrotate.d/apache2 a38d9e980faebcda9a1998fd0f90b69e
Description: Apache HTTP Server
 The Apache HTTP Server Project's goal is to build a secure, efficient and
 extensible HTTP server as standards-compliant open source software. The
 result has long been the number one web server on the Internet.
 .
 Installing this package results in a full installation, including the
 configuration files, init scripts and support scripts.
Homepage: https://httpd.apache.org/

Package: apache2-bin
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 5140
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: amd64
Source: apache2
Version: 2.4.68-1~deb12u1
Provides: apache2-api-20120211, apache2-api-20120211-openssl1.1
Depends: perl:any, libapr1 (>= 1.7.0), libaprutil1 (>= 1.6.0), libaprutil1-dbd-sqlite3 | libaprutil1-dbd-mysql | libaprutil1-dbd-odbc | libaprutil1-dbd-pgsql | libaprutil1-dbd-freetds, libaprutil1-ldap, libbrotli1 (>= 0.6.0), libc6 (>= 2.36), libcrypt1 (>= 1:4.1.0), libcurl4 (>= 7.28.0), libjansson4 (>= 2.14), libldap-2.5-0 (>= 2.5.4), liblua5.3-0, libnghttp2-14 (>= 1.50.0), libpcre2-8-0 (>= 10.22), libssl3 (>= 3.0.0), libxml2 (>= 2.7.4), zlib1g (>= 1:1.1.4)
Suggests: apache2-doc, apache2-suexec-pristine | apache2-suexec-custom, www-browser
Description: Apache HTTP Server (modules and other binary files)
 The Apache HTTP Server Project's goal is to build a secure, efficient and
 extensible HTTP server as standards-compliant open source software. The
 result has long been the number one web server on the Internet.
 .
 This package contains the binaries only and does not set up a working
 web-server instance. Install the "apache2" package to get a fully working
 instance.
Homepage: https://httpd.apache.org/

Package: apache2-data
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 847
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: apache2
Version: 2.4.68-1~deb12u1
Description: Apache HTTP Server (common files)
 The Apache HTTP Server Project's goal is to build a secure, efficient and
 extensible HTTP server as standards-compliant open source software. The
 result has long been the number one web server on the Internet.
 .
 This package contains architecture-independent common files such as icons,
 error pages and static index files.
Homepage: https://httpd.apache.org/

Package: apache2-utils
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 448
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: apache2
Version: 2.4.68-1~deb12u1
Depends: libapr1 (>= 1.4.8-2~), libaprutil1 (>= 1.5.0), libc6 (>= 2.34), libcrypt1 (>= 1:4.1.0), libssl3 (>= 3.0.0)
Description: Apache HTTP Server (utility programs for web servers)
 Provides some add-on programs useful for any web server.  These include:
  - ab (Apache benchmark tool)
  - fcgistarter (Start a FastCGI program)
  - logresolve (Resolve IP addresses to hostnames in logfiles)
  - htpasswd (Manipulate basic authentication files)
  - htdigest (Manipulate digest authentication files)
  - htdbm (Manipulate basic authentication files in DBM format, using APR)
  - htcacheclean (Clean up the disk cache)
  - rotatelogs (Periodically stop writing to a logfile and open a new one)
  - split-logfile (Split a single log including multiple vhosts)
  - checkgid (Checks whether the caller can setgid to the specified group)
  - check_forensic (Extract mod_log_forensic output from Apache log files)
  - httxt2dbm (Generate dbm files for use with RewriteMap)
Homepage: https://httpd.apache.org/

Package: apparmor
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 2567
Maintainer: Debian AppArmor Team <pkg-apparmor-team@lists.alioth.debian.org>
Architecture: amd64
Version: 3.0.8-3
Replaces: fcitx-data (<< 1:4.2.9.1-1ubuntu2)
Depends: debconf, debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.36)
Suggests: apparmor-profiles-extra, apparmor-utils
Breaks: apparmor-profiles-extra (<< 1.21), fcitx-data (<< 1:4.2.9.1-1ubuntu2), snapd (<< 2.44.3+20.04~)
Conffiles:
 /etc/apparmor.d/abi/3.0 f97e410509c5def279aa227c7de12e06
 /etc/apparmor.d/abi/kernel-5.4-outoftree-network 57b68acd4e6418fe5a06dc8c04713e3d
 /etc/apparmor.d/abi/kernel-5.4-vanilla 77047e6f0b014fa8bf27681998382044
 /etc/apparmor.d/abstractions/X e08b3a65c568c19b5922de1db3df0d92
 /etc/apparmor.d/abstractions/apache2-common b33a994a5406661304a5e2659e7b5f35
 /etc/apparmor.d/abstractions/apparmor_api/change_profile 4e10aac635b960dd6a2a94330d9dc4ce
 /etc/apparmor.d/abstractions/apparmor_api/examine db7f9bf417820acdfc4c6386c749582d
 /etc/apparmor.d/abstractions/apparmor_api/find_mountpoint 0380ddf9878be96962df2e81dc74f867
 /etc/apparmor.d/abstractions/apparmor_api/introspect ca4db5b278f4c08892c2ef7027495051
 /etc/apparmor.d/abstractions/apparmor_api/is_enabled ca0172ca6c89703ff9d8f4bc50998ddc
 /etc/apparmor.d/abstractions/aspell f8676bccab5b82b0b6d723549b3a1a83
 /etc/apparmor.d/abstractions/audio b45b7ef3c54e5e824157b0030c34ce1c
 /etc/apparmor.d/abstractions/authentication b3238cd14352633630d980a6e3b43613
 /etc/apparmor.d/abstractions/base ddee3a30c093993c33287bef194807c9
 /etc/apparmor.d/abstractions/bash bc217483455477e1431f9e0b14fe2caf
 /etc/apparmor.d/abstractions/consoles bea9fc84b0a5d025b0baa2012fb5f187
 /etc/apparmor.d/abstractions/crypto c735eefc509d328d994c9935fdd72dac
 /etc/apparmor.d/abstractions/cups-client b34dde998ba9e2008a449b7e806b4e8a
 /etc/apparmor.d/abstractions/dbus a940df2475b2aadae7f0f352426ac0eb
 /etc/apparmor.d/abstractions/dbus-accessibility 26e593998ef58a443df94b30c462969c
 /etc/apparmor.d/abstractions/dbus-accessibility-strict 373b1eb5eab3ed798b87b63f395e59ec
 /etc/apparmor.d/abstractions/dbus-network-manager-strict 2faa81c15df866984bbefe675dd7c535
 /etc/apparmor.d/abstractions/dbus-session aae714455fab265eeaf1b6a8e347895a
 /etc/apparmor.d/abstractions/dbus-session-strict 92b0802aa074d2fa736e6a34fb21dae6
 /etc/apparmor.d/abstractions/dbus-strict 40f5d3c55ee978c6741d4d489357661c
 /etc/apparmor.d/abstractions/dconf 7c1eb2f1eb19d459e86f262c0e682107
 /etc/apparmor.d/abstractions/dovecot-common dc5a9e349cdac4d77aa883777c523c5a
 /etc/apparmor.d/abstractions/dri-common 82e78cab7a0b877758d8d6a3dce1f50d
 /etc/apparmor.d/abstractions/dri-enumerate 94c00f262a2e2ecc567417dd655bf06b
 /etc/apparmor.d/abstractions/enchant 4b0d599339d403df6444e116f3b49095
 /etc/apparmor.d/abstractions/exo-open c02b86d89bdf4954faecdc39bbe8da40
 /etc/apparmor.d/abstractions/fcitx a272b0bc5d085b59eafdb3e91662ce1a
 /etc/apparmor.d/abstractions/fcitx-strict ae494d8b71f3074ce9ae46d08c895113
 /etc/apparmor.d/abstractions/fonts 8594bed8b12b8b8d531c9614a2e03b75
 /etc/apparmor.d/abstractions/freedesktop.org 20d29d43d5f9040dd034b842f7119297
 /etc/apparmor.d/abstractions/gio-open e1170caef97ca7544f73394db5f29fd6
 /etc/apparmor.d/abstractions/gnome 8f952820da814db21fb3664b0ec572c5
 /etc/apparmor.d/abstractions/gnupg 28bb447b06d329b9a0307fa3957738a9
 /etc/apparmor.d/abstractions/gtk ab9e908a770d69cedd3804bbaca3cb60
 /etc/apparmor.d/abstractions/gvfs-open 75e1db87e189996c93b7f6a54898027d
 /etc/apparmor.d/abstractions/hosts_access 77d68b32a830118794977e7d9685e41e
 /etc/apparmor.d/abstractions/ibus 3ccdcd8334042d7abc1691235d14a0e8
 /etc/apparmor.d/abstractions/kde 40da8726c9a51c68a0c865e588ddc74e
 /etc/apparmor.d/abstractions/kde-globals-write aa5efc180fc7f48e257e3a745525bb10
 /etc/apparmor.d/abstractions/kde-icon-cache-write 0fe4c3bfdccd6098242ac94efb132a13
 /etc/apparmor.d/abstractions/kde-language-write f6419d3ec59c4f72af6ff62c85e6b50f
 /etc/apparmor.d/abstractions/kde-open5 719648196aaa5921cbbee56884ed0a0a
 /etc/apparmor.d/abstractions/kerberosclient 9eec8b4b7751bfc24c7527366652332b
 /etc/apparmor.d/abstractions/ldapclient 2d5fbb27b438f3a723af1bd0ec6589cc
 /etc/apparmor.d/abstractions/libpam-systemd 54f5c7966013802550bcd298093356a8
 /etc/apparmor.d/abstractions/likewise 5b5adaa576726b606437def545b213d9
 /etc/apparmor.d/abstractions/mdns 97550547e53831aed4566fe0412f7fae
 /etc/apparmor.d/abstractions/mesa b7521344335439370fe52982eeb0082a
 /etc/apparmor.d/abstractions/mir c04cae04705882b43888b8bdad39ab7c
 /etc/apparmor.d/abstractions/mozc 51778ed730a4ad9d06ad39a848f98ae3
 /etc/apparmor.d/abstractions/mysql d0220787933388d0a1ee1e641ecdeb8d
 /etc/apparmor.d/abstractions/nameservice 111503b5f2db97e4fa92cdcacda09b87
 /etc/apparmor.d/abstractions/nis 42d818438562ff0a7d21566c52bdf373
 /etc/apparmor.d/abstractions/nss-systemd e51b32af03e4b39ad223a921fc08daf2
 /etc/apparmor.d/abstractions/nvidia 32f9a5a22b46bcd4696f42d3c1004a99
 /etc/apparmor.d/abstractions/opencl 390dd92d75c06bf01a0b380fa279816f
 /etc/apparmor.d/abstractions/opencl-common eddad0564696b2ecab52f34c4cb0bf44
 /etc/apparmor.d/abstractions/opencl-intel 5a07573a7082eb6906c62707415f86b7
 /etc/apparmor.d/abstractions/opencl-mesa d847b3acc2ba5df53309564428b32c5e
 /etc/apparmor.d/abstractions/opencl-nvidia 7a28b9490805d8d885c118004584fd63
 /etc/apparmor.d/abstractions/opencl-pocl 45de7095b4df796a2a49a1f50bc6af83
 /etc/apparmor.d/abstractions/openssl eebb603cd3a947c952ae9e7b2a21176a
 /etc/apparmor.d/abstractions/orbit2 3243686cfb77b2eb8ddf4dd9b1dacf51
 /etc/apparmor.d/abstractions/p11-kit 66b3abf2da8bd45e868a97a8b5c1c2de
 /etc/apparmor.d/abstractions/perl 831a9730e6f5901c26e7370e72d6e4ca
 /etc/apparmor.d/abstractions/php a13c99b453937ad35123f7f06b081920
 /etc/apparmor.d/abstractions/php-worker d63894f8faa7f2f4fe6616f9aa6c66fa
 /etc/apparmor.d/abstractions/php5 349438200b0b1be7b44f44d2a8edb2d8
 /etc/apparmor.d/abstractions/postfix-common 43269973845c1185a9a49dc989e46885
 /etc/apparmor.d/abstractions/private-files ed54f0bf093512ab1278415225bd7c76
 /etc/apparmor.d/abstractions/private-files-strict 863e1204a719f9d3ef434c51d10c9aae
 /etc/apparmor.d/abstractions/python 085157c119b1c08179d0df54243879a8
 /etc/apparmor.d/abstractions/qt5 82345ad67eb8610fd5416145758802b5
 /etc/apparmor.d/abstractions/qt5-compose-cache-write d9590e9a862c5475024675006bf2b0ad
 /etc/apparmor.d/abstractions/qt5-settings-write 08e907106f6afdd628ce7953d6804264
 /etc/apparmor.d/abstractions/recent-documents-write 8e878574cc41a1db88eadc9c2386a323
 /etc/apparmor.d/abstractions/ruby a376a4d9edd9b6e95196f04316846410
 /etc/apparmor.d/abstractions/samba b6013c9085d30556cb8c0ea682381f99
 /etc/apparmor.d/abstractions/samba-rpcd c2613f9459234e0fa6b37de3b5ddae5d
 /etc/apparmor.d/abstractions/smbpass 22d2a76d6718f69140430f2e4160a17c
 /etc/apparmor.d/abstractions/snap_browsers ca9d858751091cc53ea94370171fc7c8
 /etc/apparmor.d/abstractions/ssl_certs 2f3965aa2a66be11bc5acca29d3b303b
 /etc/apparmor.d/abstractions/ssl_keys 8610f0658edabc1b88a71676f0f5831b
 /etc/apparmor.d/abstractions/svn-repositories ff8e52c4e1962b96d234dd7a67f1d8f8
 /etc/apparmor.d/abstractions/ubuntu-bittorrent-clients d7c1be4622fa1a1a95cc710157495a8b
 /etc/apparmor.d/abstractions/ubuntu-browsers 4637c1d896dc3f2348636d216f57b12d
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/chromium-browser 153113ed58cd2b82ae59e3cf99e3df49
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/java 6e3557f9b8d6d7bfa53e5773a1d1701c
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/kde 079bbcda041f2ab3b28a0aa73e808779
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/mailto 2d485cfd81cbaa43ea61d754f937f722
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/multimedia 975af60c3988f0f29bc7650281add89d
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/plugins-common 109801b1eeb3215b1940302855106050
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/productivity f7141d1791df3cd70f1f1ffc598357de
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/text-editors 530a78215e8a637dee7df2dc06bef104
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/ubuntu-integration c36564692bd37edd33abe677b820aa0a
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/ubuntu-integration-xul 24a74fcfac9a35ff3213b5cf861f894b
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/user-files 6a97ede75f91e3ffadd94c192b47d203
 /etc/apparmor.d/abstractions/ubuntu-console-browsers 449cc0ce0d1645dfe750bc59286f3ac4
 /etc/apparmor.d/abstractions/ubuntu-console-email 5df8527a131f6073c0105e55855921c2
 /etc/apparmor.d/abstractions/ubuntu-email 4ed454816879d62df7390b625196eef8
 /etc/apparmor.d/abstractions/ubuntu-feed-readers 652ddbb016d2970643ac0854be6afb7b
 /etc/apparmor.d/abstractions/ubuntu-gnome-terminal 4a73e5a52f0aa3155b3ce5ce3f0b88a1
 /etc/apparmor.d/abstractions/ubuntu-helpers 33dde905865b59b43bd830845e72b780
 /etc/apparmor.d/abstractions/ubuntu-konsole 49c45901c2aa6522869f6ecd11fc4885
 /etc/apparmor.d/abstractions/ubuntu-media-players 1cc28886d11782d036f5ad31c1fe6c0e
 /etc/apparmor.d/abstractions/ubuntu-unity7-base 76a91b15a0ac3045947dfb417f4be4e9
 /etc/apparmor.d/abstractions/ubuntu-unity7-launcher 71beb26198b3834a8cf87cb3958ce49e
 /etc/apparmor.d/abstractions/ubuntu-unity7-messaging d9524c849811152e7aaabfcac5bcd1ad
 /etc/apparmor.d/abstractions/ubuntu-xterm bed284d239d3fad55ec4138c1db49b1d
 /etc/apparmor.d/abstractions/user-download b0084d0cf20ab46c99a443d0bf4293e8
 /etc/apparmor.d/abstractions/user-mail 93afccf07c25a810459abb567bdf0ccd
 /etc/apparmor.d/abstractions/user-manpages 9f157582739dc69c3f2c092aa4cb76a2
 /etc/apparmor.d/abstractions/user-tmp 7adbf0673a8185216a529092e1bafe25
 /etc/apparmor.d/abstractions/user-write a35ac2aa74b253ad4d48c52d3e58e86c
 /etc/apparmor.d/abstractions/video cc02171362a3819ae3ec5e041afe46ef
 /etc/apparmor.d/abstractions/vulkan 6dc5c9c5fb65ea32f7dd3f20314fd9fe
 /etc/apparmor.d/abstractions/wayland 0dc88e01e40a1f7710cde25cf2d3e665
 /etc/apparmor.d/abstractions/web-data cb78fbb2953fa52805f371c166fd4fbd
 /etc/apparmor.d/abstractions/winbind 456c2a26ca32421ac44bd8924fbf55a8
 /etc/apparmor.d/abstractions/wutmp 5c2b39fe9978bb8b5e9637519c522c7f
 /etc/apparmor.d/abstractions/xad 4716a62377ebebbe55f0246c35591485
 /etc/apparmor.d/abstractions/xdg-desktop d0833b7462602d6008ad86a9ba724a1e
 /etc/apparmor.d/abstractions/xdg-open 79c6f5afd2a89b7fbc53d23cbba367ea
 /etc/apparmor.d/local/README e3739c14b4f8bb9b1934d7a4cdbf72c5
 /etc/apparmor.d/lsb_release 0909b9f0e2446fb21e6afa1819c213b0
 /etc/apparmor.d/nvidia_modprobe 89b64f211a74288347bd148f64a4623c
 /etc/apparmor.d/tunables/alias 45dca5dd72a6c862d27caa936e6c00ad
 /etc/apparmor.d/tunables/apparmorfs 99b56bc365d01a8d83cc60c359eb8184
 /etc/apparmor.d/tunables/dovecot 1b0d5ec63a9c87387142bdb2c94e7ede
 /etc/apparmor.d/tunables/etc e31a6ae15aa518bb5b826db5f6aaf9ff
 /etc/apparmor.d/tunables/global bf4f0b3b17bf1625879e7e90cbe7f8a7
 /etc/apparmor.d/tunables/home 7294038da607cb4310d40dc1cb89f398
 /etc/apparmor.d/tunables/home.d/site.local 3b274206fb06833ee3e151e351dad51b
 /etc/apparmor.d/tunables/kernelvars 5d30bf3c3c6e33927ba26784985ed8ab
 /etc/apparmor.d/tunables/multiarch b484327cecfb698fc83ac505699b255a
 /etc/apparmor.d/tunables/multiarch.d/site.local 3c9eef1fbfb41fc452060086262e7bcb
 /etc/apparmor.d/tunables/proc ffaa055ceb36031c973ffaece22a5fc0
 /etc/apparmor.d/tunables/run 780b70bb51fba582c115b085a962373b
 /etc/apparmor.d/tunables/securityfs 45d73edb5f03d141634ec6a5ba2b10f3
 /etc/apparmor.d/tunables/share a15f039c6615aa63acbec04b313f08f2
 /etc/apparmor.d/tunables/sys 30f2fdf4695c26642ea02b5a2063cfbc
 /etc/apparmor.d/tunables/xdg-user-dirs 6d1a4ea99a9af4cbab2255535a1c7077
 /etc/apparmor/parser.conf fb17692051e880a8bf1686326d188bbf
 /etc/init.d/apparmor 42e157dc91f6554abefa2160c2bc42db
Description: user-space parser utility for AppArmor
 apparmor provides the system initialization scripts needed to use the
 AppArmor Mandatory Access Control system, including the AppArmor Parser
 which is required to convert AppArmor text profiles into machine-readable
 policies that are loaded into the kernel for use with the AppArmor Linux
 Security Module.
Homepage: https://apparmor.net/

Package: apt
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 4232
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: amd64
Version: 2.6.1
Replaces: apt-transport-https (<< 1.5~alpha4~), apt-utils (<< 1.3~exp2~)
Provides: apt-transport-https (= 2.6.1)
Depends: adduser, gpgv | gpgv2 | gpgv1, libapt-pkg6.0 (>= 2.6.1), debian-archive-keyring, libc6 (>= 2.34), libgcc-s1 (>= 3.0), libgnutls30 (>= 3.7.5), libseccomp2 (>= 2.4.2), libstdc++6 (>= 11), libsystemd0
Recommends: ca-certificates
Suggests: apt-doc, aptitude | synaptic | wajig, dpkg-dev (>= 1.17.2), gnupg | gnupg2 | gnupg1, powermgmt-base
Breaks: apt-transport-https (<< 1.5~alpha4~), apt-utils (<< 1.3~exp2~), aptitude (<< 0.8.10)
Conffiles:
 /etc/apt/apt.conf.d/01autoremove 879455db9b938ce287b23383629aedce
 /etc/cron.daily/apt-compat 1400ab07a4a2905b04c33e3e93d42b7b
 /etc/logrotate.d/apt 179f2ed4f85cbaca12fa3d69c2a4a1c3
Description: commandline package manager
 This package provides commandline tools for searching and
 managing as well as querying information about packages
 as a low-level access to all features of the libapt-pkg library.
 .
 These include:
  * apt-get for retrieval of packages and information about them
    from authenticated sources and for installation, upgrade and
    removal of packages together with their dependencies
  * apt-cache for querying available information about installed
    as well as installable packages
  * apt-cdrom to use removable media as a source for packages
  * apt-config as an interface to the configuration settings
  * apt-key as an interface to manage authentication keys

Package: apt-listchanges
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 423
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: all
Version: 3.24
Depends: apt (>= 0.5.3), python3-apt (>= 0.7.93), python3-debconf, sensible-utils, ucf (>= 0.28), debconf (>= 0.5) | debconf-2.0, python3:any (>= 3.7~)
Suggests: default-mta | mail-transport-agent, python3-gi, www-browser, x-terminal-emulator
Conffiles:
 /etc/apt/apt.conf.d/20listchanges 105aa4aeb0527308bf3a0c70151d7684
Description: package change history notification tool
 The tool apt-listchanges can compare a new version of a
 package with the one currently installed and show what has been
 changed, by extracting the relevant entries from the Debian changelog
 and NEWS files.
 .
 It can be run on several .deb archives at a time to get a list of all
 changes that would be caused by installing or upgrading a group of
 packages. When configured as an APT plugin it will do this
 automatically during upgrades.

Package: apt-utils
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 1037
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: amd64
Source: apt
Version: 2.6.1
Depends: apt (= 2.6.1), libapt-pkg6.0 (>= 2.6.1), libc6 (>= 2.34), libdb5.3, libgcc-s1 (>= 3.0), libstdc++6 (>= 11)
Description: package management related utility programs
 This package contains some less used commandline utilities related
 to package management with APT.
 .
  * apt-extracttemplates is used by debconf to prompt for configuration
    questions before installation.
  * apt-ftparchive is used to create Packages and other index files
    needed to publish an archive of Debian packages
  * apt-sortpkgs is a Packages/Sources file normalizer.

Package: atop
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 533
Maintainer: Marc Haber <atop@packages.debian.org>
Architecture: amd64
Version: 2.8.1-1+deb12u1
Depends: libc6 (>= 2.34), libncursesw6 (>= 6), libtinfo6 (>= 6), zlib1g (>= 1:1.1.4)
Pre-Depends: init-system-helpers (>= 1.54~)
Recommends: cron | cron-daemon
Conffiles:
 /etc/cron.d/atop b87c00462cdeb6daa99a7ba0194d19b6
 /etc/default/atop cc501492119fc4d871ddae741b09ef51
 /etc/init.d/atop 250a9814cceca6b8c5f67f1f2997823d
 /etc/init.d/atopacct dbf3e1afd3795195f16be3b790836994
Description: Monitor for system resources and process activity
 Atop is an ASCII full-screen performance monitor, similar to the top command,
 but atop only shows the active system-resources and processes, and only shows
 the deviations since the previous interval.  At regular intervals, it shows
 system-level activity related to the CPU, memory, swap, disks and network
 layers, and it shows for every active process the CPU utilization in system
 and user mode, the virtual and resident memory growth, priority, username,
 state, and exit code. The process level activity is also shown for processes
 which finished during the last interval, to get a complete overview about the
 consumers of things such as CPU time.
 .
  Author: Gerlof Langeveld <gerlof@ATComputing.nl>
Homepage: https://atoptool.nl/

Package: augeas-lenses
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 2013
Maintainer: Hilko Bengen <bengen@debian.org>
Architecture: all
Multi-Arch: foreign
Source: augeas
Version: 1.14.0-1+deb12u1
Suggests: augeas-doc
Description: Set of lenses needed by libaugeas0 to parse config files
 Augeas parses configuration files described in lenses into a tree structure,
 which it exposes through its public API. Changes made through the API are
 written back to the initially read files.
 .
 Lenses are the building blocks of the file <-> tree transformation; they
 combine parsing a file and building the tree (the get transformation), with
 turning the tree back into an (updated) file (the put transformation).
 .
 The transformation works very hard to preserve comments and formatting
 details. It is controlled by ``lens'' definitions that describe the file
 format and the transformation into a tree. This package includes the official
 set of lenses.
Homepage: http://augeas.net/

Package: autoconf
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 2025
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2.71-3
Depends: perl (>> 5.005), m4 (>= 1.4.13), debianutils (>= 1.8)
Recommends: automake | automaken
Suggests: autoconf-archive, gnu-standards, autoconf-doc, libtool, gettext
Breaks: gettext (<< 0.10.39), pkg-config (<< 0.25-1.1)
Conffiles:
 /etc/emacs/site-start.d/50autoconf.el 297521889d690871ec9d89c5eeff745a
Description: automatic configure script builder
 The standard for FSF source packages.  This is only useful if you
 write your own programs or if you extensively modify other people's
 programs.
 .
 For an extensive library of additional Autoconf macros, install the
 `autoconf-archive' package.
 .
 This version of autoconf is not compatible with scripts meant for
 Autoconf 2.13 or earlier.
Homepage: https://www.gnu.org/software/autoconf/

Package: automake
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 1837
Maintainer: Eric Dorland <eric@debian.org>
Architecture: all
Multi-Arch: foreign
Source: automake-1.16
Version: 1:1.16.5-1.3
Provides: automake-1.16, automaken
Depends: autoconf, autotools-dev
Suggests: autoconf-doc, gnu-standards
Description: Tool for generating GNU Standards-compliant Makefiles
 Automake is a tool for automatically generating `Makefile.in's from
 files called `Makefile.am'.
 .
 The goal of Automake is to remove the burden of Makefile maintenance
 from the back of the individual GNU maintainer (and put it on the back
 of the Automake maintainer).
 .
 The `Makefile.am' is basically a series of `make' macro definitions
 (with rules being thrown in occasionally).  The generated
 `Makefile.in's are compliant with the GNU Makefile standards.
 .
 Automake 1.16 fails to work in a number of situations that Automake
 1.11, and 1.15 did, so some previous versions are available as separate
 packages.
Homepage: https://www.gnu.org/software/automake/

Package: autotools-dev
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 134
Maintainer: Henrique de Moraes Holschuh <hmh@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 20220109.1
Replaces: autoconf (<< 2.70~)
Breaks: autoconf (<< 2.70~)
Enhances: cdbs, debhelper
Description: Update infrastructure for config.{guess,sub} files
 This package installs an up-to-date version of config.guess and
 config.sub, used by the automake and libtool packages.  It provides
 the canonical copy of those files for other packages as well.
 .
 It also documents in /usr/share/doc/autotools-dev/README.Debian.gz
 best practices and guidelines for using autoconf, automake and
 friends on Debian packages.  This is a must-read for any developers
 packaging software that uses the GNU autotools, or GNU gettext.
 .
 Additionally this package provides seamless integration into Debhelper
 or CDBS, allowing maintainers to easily update config.{guess,sub} files
 in their packages.
Homepage: https://savannah.gnu.org/projects/config/

Package: base-files
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 341
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 12.4+deb12u15
Replaces: base, dpkg (<= 1.15.0), miscutils
Provides: base
Pre-Depends: awk
Breaks: debian-security-support (<< 2019.04.25), initscripts (<< 2.88dsf-13.3), sendfile (<< 2.1b.20080616-5.2~)
Conffiles:
 /etc/debian_version da9f3e5a56d6162ea9d5feed57fbf349
 /etc/dpkg/origins/debian c47b6815f67ad1aeccb0d4529bd0b990
 /etc/host.conf 4eb63731c9f5e30903ac4fc07a7fe3d6
 /etc/issue 349d61a0e072d678e3e94923f0c3ce0e
 /etc/issue.net 3ae9b9ff69a78d614864f1957778fecb
 /etc/update-motd.d/10-uname 9e1b832b7b06f566156e7c9e0548247b
Description: Debian base system miscellaneous files
 This package contains the basic filesystem hierarchy of a Debian system, and
 several important miscellaneous files, such as /etc/debian_version,
 /etc/host.conf, /etc/issue, /etc/motd, /etc/profile, and others,
 and the text of several common licenses in use on Debian systems.

Package: base-passwd
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 247
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 3.6.1
Replaces: base
Depends: libc6 (>= 2.34), libdebconfclient0 (>= 0.145), libselinux1 (>= 3.1~)
Recommends: debconf (>= 0.5) | debconf-2.0
Description: Debian base system master password and group files
 These are the canonical master copies of the user database files
 (/etc/passwd and /etc/group), containing the Debian-allocated user and
 group IDs. The update-passwd tool is provided to keep the system databases
 synchronized with these master files.

Package: bash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 7164
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: bash (5.2.15-2)
Version: 5.2.15-2+b13
Replaces: bash-completion (<< 20060301-0), bash-doc (<= 2.05-1)
Depends: base-files (>= 2.1.12), debianutils (>= 5.6-0.1)
Pre-Depends: libc6 (>= 2.36), libtinfo6 (>= 6)
Recommends: bash-completion (>= 20060301-0)
Suggests: bash-doc
Conflicts: bash-completion (<< 20060301-0)
Conffiles:
 /etc/bash.bashrc 89269e1298235f1b12b4c16e4065ad0d
 /etc/skel/.bash_logout 22bfb8c1dd94b5f3813a2b25da67463f
 /etc/skel/.bashrc ee35a240758f374832e809ae0ea4883a
 /etc/skel/.profile f4e81ade7d6f9fb342541152d08e7a97
Description: GNU Bourne Again SHell
 Bash is an sh-compatible command language interpreter that executes
 commands read from the standard input or from a file.  Bash also
 incorporates useful features from the Korn and C shells (ksh and csh).
 .
 Bash is ultimately intended to be a conformant implementation of the
 IEEE POSIX Shell and Tools specification (IEEE Working Group 1003.2).
 .
 The Programmable Completion Code, by Ian Macdonald, is now found in
 the bash-completion package.
Homepage: http://tiswww.case.edu/php/chet/bash/bashtop.html

Package: bash-completion
Status: install ok installed
Priority: standard
Section: shells
Installed-Size: 1463
Maintainer: Gabriel F. T. Gomes <gabriel@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1:2.11-6
Provides: dh-sequence-bash-completion
Conffiles:
 /etc/bash_completion a81b3f1cb197219b815942f4fc7fa94e
 /etc/profile.d/bash_completion.sh 4257431f99f10e5fbe86b39b6b9e5002
Description: programmable completion for the bash shell
 bash completion extends bash's standard completion behavior to achieve
 complex command lines with just a few keystrokes.  This project was
 conceived to produce programmable completion routines for the most
 common Linux/UNIX commands, reducing the amount of typing sysadmins
 and programmers need to do on a daily basis.
Homepage: https://github.com/scop/bash-completion

Package: bind9-dnsutils
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 499
Maintainer: Debian DNS Team <team+dns@tracker.debian.org>
Architecture: amd64
Source: bind9
Version: 1:9.18.49-1~deb12u2
Provides: dnsutils
Depends: bind9-host | host, bind9-libs (= 1:9.18.49-1~deb12u2), libc6 (>= 2.34), libedit2 (>= 2.11-20080614-0), libidn2-0 (>= 2.0.0), libjemalloc2 (>= 3.5.0), libkrb5-3 (>= 1.6.dfsg.2), libprotobuf-c1 (>= 1.0.0)
Breaks: bind-dnsutils (<< 1:9.13.6~), dnsutils (<< 1:9.13.6~)
Conflicts: bind-dnsutils (<< 1:9.13.6~), dnsutils (<< 1:9.13.6~)
Description: Clients provided with BIND 9
 The Berkeley Internet Name Domain (BIND 9) implements an Internet domain
 name server.  BIND 9 is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package delivers various client programs related to DNS that are
 derived from the BIND 9 source tree.
 .
  - dig - query the DNS in various ways
  - nslookup - the older way to do it
  - nsupdate - perform dynamic updates (See RFC2136)
Homepage: https://www.isc.org/downloads/bind/

Package: bind9-host
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 145
Maintainer: Debian DNS Team <team+dns@tracker.debian.org>
Architecture: amd64
Source: bind9
Version: 1:9.18.49-1~deb12u2
Replaces: bind-host (<< 1:9.13.6~)
Provides: host
Depends: bind9-libs (= 1:9.18.49-1~deb12u2), libc6 (>= 2.34), libidn2-0 (>= 2.0.0), libjemalloc2 (>= 3.5.0)
Breaks: bind-host (<< 1:9.13.6~)
Description: DNS Lookup Utility
 This package provides the 'host' DNS lookup utility in the form that
 is bundled with the BIND 9 sources.
Homepage: https://www.isc.org/downloads/bind/

Package: bind9-libs
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 3511
Maintainer: Debian DNS Team <team+dns@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: bind9
Version: 1:9.18.49-1~deb12u2
Replaces: bind-libs (<< 1:9.13.6~)
Depends: libuv1 (>= 1.40.0), libc6 (>= 2.34), libfstrm0 (>= 0.2.0), libgssapi-krb5-2 (>= 1.17), libjemalloc2 (>= 4.0.0), libjson-c5 (>= 0.15), libkrb5-3 (>= 1.6.dfsg.2), liblmdb0 (>= 0.9.7), libmaxminddb0 (>= 1.3.0), libnghttp2-14 (>= 1.12.0), libprotobuf-c1 (>= 1.0.1), libssl3 (>= 3.0.0), libxml2 (>= 2.7.4), zlib1g (>= 1:1.1.4)
Breaks: bind-libs (<< 1:9.13.6~)
Description: Shared Libraries used by BIND 9
 The Berkeley Internet Name Domain (BIND 9) implements an Internet domain
 name server.  BIND 9 is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package contains a bundle of shared libraries used by BIND 9.
Homepage: https://www.isc.org/downloads/bind/

Package: binutils
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 109
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Version: 2.40-2
Provides: binutils-gold, elf-binutils
Depends: binutils-common (= 2.40-2), libbinutils (= 2.40-2), binutils-x86-64-linux-gnu (= 2.40-2)
Suggests: binutils-doc (>= 2.40-2)
Conflicts: binutils-mingw-w64-i686 (<< 2.23.52.20130612-1+3), binutils-mingw-w64-x86-64 (<< 2.23.52.20130612-1+3), binutils-multiarch (<< 2.27-8), modutils (<< 2.4.19-1)
Description: GNU assembler, linker and binary utilities
 The programs in this package are used to assemble, link and manipulate
 binary and object files.  They may be used in conjunction with a compiler
 and various libraries to build programs.
Homepage: https://www.gnu.org/software/binutils/

Package: binutils-common
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 15021
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: binutils
Version: 2.40-2
Replaces: binutils (<< 2.38.50.20220527-2), binutils-multiarch (<< 2.38.50.20220527-2)
Breaks: binutils (<< 2.38.50.20220527-2), binutils-multiarch (<< 2.38.50.20220527-2)
Conffiles:
 /etc/gprofng.rc d8f321679d2ce58b1399e4e6de17fcc9
Description: Common files for the GNU assembler, linker and binary utilities
 This package contains the localization files used by binutils packages for
 various target architectures and parts of the binutils documentation. It is
 not useful on its own.
Homepage: https://www.gnu.org/software/binutils/

Package: binutils-x86-64-linux-gnu
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 11428
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: binutils
Version: 2.40-2
Replaces: binutils (<< 2.29-6), binutils-dev (<< 2.38.50.20220609-2)
Depends: binutils-common (= 2.40-2), libbinutils (= 2.40-2), libc6 (>= 2.36), libctf-nobfd0 (>= 2.36), libctf0 (>= 2.36), libgcc-s1 (>= 4.2), libgprofng0 (>= 2.40-2), libjansson4 (>= 2.14), libstdc++6 (>= 5), libzstd1 (>= 1.5.2), zlib1g (>= 1:1.1.4)
Suggests: binutils-doc (= 2.40-2)
Breaks: binutils (<< 2.29-6), binutils-dev (<< 2.38.50.20220609-2)
Description: GNU binary utilities, for x86-64-linux-gnu target
 This package provides GNU assembler, linker and binary utilities
 for the x86-64-linux-gnu target.
 .
 You don't need this package unless you plan to cross-compile programs
 for x86-64-linux-gnu and x86-64-linux-gnu is not your native platform.
Homepage: https://www.gnu.org/software/binutils/

Package: bsd-mailx
Status: install ok installed
Priority: optional
Section: mail
Installed-Size: 175
Maintainer: Robert Luberda <robert@debian.org>
Architecture: amd64
Version: 8.1.2-0.20220412cvs-1
Provides: mail-reader, mailx
Depends: default-mta | mail-transport-agent, libbsd0 (>= 0.11.0), libc6 (>= 2.33), liblockfile1 (>= 1.0)
Conffiles:
 /etc/mail.rc 2bd8160a85f53c20e55ebd375fc89431
Description: simple mail user agent
 bsd-mailx is the traditional simple command-line-mode mail user agent.
 Even if you don't use it, it may be required by other programs.
 .
 The /usr/bin/mail command provided by this package is a very simple one,
 and does not include many features that can be found in more advanced
 mail user agents.
 .
 For example bsd-mailx DOES NOT support:
  - MIME           (i.e. no attachments, no UTF-8 or other charsets support);
  - SMTP protocol  (/usr/sbin/sendmail interface only is used);
  - POP3/IMAP      (bsd-mailx reads local mailboxes only);
  - maildir format (traditional mbox only format is supported).
 .
 If the above features are needed, please consider installing another package
 providing similar /usr/bin/mail interface:
  - s-nail package,
  - or mailutils package.

Package: bsdextrautils
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 337
Maintainer: util-linux packagers <util-linux@packages.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.38.1-5+deb12u3
Replaces: bsdmainutils (<< 12.1.3), nwrite
Depends: libc6 (>= 2.34), libsmartcols1 (>= 2.38), libtinfo6 (>= 6)
Breaks: bsdmainutils (<< 12.1.3), nwrite
Conflicts: nwrite
Description: extra utilities from 4.4BSD-Lite
 This package contains some extra BSD utilities: col, colcrt, colrm, column,
 hd, hexdump, look, ul and write.
 Other BSD utilities are provided by bsdutils and calendar.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/

Package: bsdutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 355
Maintainer: util-linux packagers <util-linux@packages.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux (2.38.1-5+deb12u3)
Version: 1:2.38.1-5+deb12u3
Pre-Depends: libc6 (>= 2.34), libsystemd0
Recommends: bsdextrautils
Description: basic utilities from 4.4BSD-Lite
 This package contains the bare minimum of BSD utilities needed for a Debian
 system: logger, renice, script, scriptlive, scriptreplay and wall. The
 remaining standard BSD utilities are provided by bsdextrautils.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/

Package: build-essential
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 20
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Version: 12.9
Depends: libc6-dev | libc-dev, gcc (>= 4:10.2), g++ (>= 4:10.2), make, dpkg-dev (>= 1.17.11)
Description: Informational list of build-essential packages
 If you do not plan to build Debian packages, you don't need this
 package.  Starting with dpkg (>= 1.14.18) this package is required
 for building Debian packages.
 .
 This package contains an informational list of packages which are
 considered essential for building Debian packages.  This package also
 depends on the packages on that list, to make it easy to have the
 build-essential packages installed.
 .
 If you have this package installed, you only need to install whatever
 a package specifies as its build-time dependencies to build the
 package.  Conversely, if you are determining what your package needs
 to build-depend on, you can always leave out the packages this
 package depends on.
 .
 This package is NOT the definition of what packages are
 build-essential; the real definition is in the Debian Policy Manual.
 This package contains merely an informational list, which is all
 most people need.   However, if this package and the manual disagree,
 the manual is correct.

Package: bzip2
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 121
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: bzip2 (1.0.8-5)
Version: 1.0.8-5+b1
Replaces: libbz2 (<< 0.9.5d-3)
Depends: libbz2-1.0 (= 1.0.8-5+b1), libc6 (>= 2.34)
Suggests: bzip2-doc
Description: high-quality block-sorting file compressor - utilities
 bzip2 is a freely available, patent free, data compressor.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding.  Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
Homepage: https://sourceware.org/bzip2/

Package: bzip2-doc
Status: install ok installed
Priority: optional
Section: doc
Installed-Size: 612
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: all
Multi-Arch: foreign
Source: bzip2
Version: 1.0.8-5
Replaces: bzip2 (<< 1.0.4-0ubuntu2)
Description: high-quality block-sorting file compressor - documentation
 This package contains the bzip2 user manual in HTML, PDF, PS and Texinfo
 formats.
 .
 bzip2 is a freely available, patent free, data compressor.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding.  Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
Homepage: https://sourceware.org/bzip2/

Package: ca-certificates
Status: install ok installed
Priority: standard
Section: misc
Installed-Size: 390
Maintainer: Julien Cristau <jcristau@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 20250419~deb12u1
Depends: openssl (>= 1.1.1), debconf (>= 0.5) | debconf-2.0
Breaks: ca-certificates-java (<< 20121112+nmu1)
Enhances: openssl
Description: Common CA certificates
 Contains the certificate authorities shipped with Mozilla's browser to allow
 SSL-based applications to check for the authenticity of SSL connections.
 .
 Please note that Debian can neither confirm nor deny whether the
 certificate authorities whose certificates are included in this package
 have in any way been audited for trustworthiness or RFC 3647 compliance.
 Full responsibility to assess them belongs to the local system
 administrator.

Package: cabextract
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 83
Maintainer: Eric Sharkey <sharkey@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.9-3
Depends: libmspack0 (>= 0.9.1-1), libc6 (>= 2.14)
Enhances: konqueror
Description: Microsoft Cabinet file unpacker
 Cabextract is a program which unpacks cabinet (.cab) files, which
 are a form of archive Microsoft uses to distribute their software
 and things like Windows Font Packs.

Package: certbot
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 159
Maintainer: Debian Let's Encrypt <team+letsencrypt@tracker.debian.org>
Architecture: all
Source: python-certbot
Version: 2.1.0-4
Replaces: letsencrypt
Provides: letsencrypt
Depends: python3-certbot (= 2.1.0-4), debconf (>= 0.5) | debconf-2.0, python3:any
Suggests: python-certbot-doc, python3-certbot-apache, python3-certbot-nginx
Conffiles:
 /etc/cron.d/certbot 284af9ad9d67d7d7e9092fdae2d86273
 /etc/letsencrypt/cli.ini d409bf370c29a96fe865b5536b2135da
 /etc/logrotate.d/certbot a815a66a333f2637c00055fcd44b02d4
Description: automatically configure HTTPS using Let's Encrypt
 The objective of Certbot, Let's Encrypt, and the ACME (Automated
 Certificate Management Environment) protocol is to make it possible
 to set up an HTTPS server and have it automatically obtain a
 browser-trusted certificate, without any human intervention. This is
 accomplished by running a certificate management agent on the web
 server.
 .
 This agent is used to:
 .
   - Automatically prove to the Let's Encrypt CA that you control the website
   - Obtain a browser-trusted certificate and set it up on your web server
   - Keep track of when your certificate is going to expire, and renew it
   - Help you revoke the certificate if that ever becomes necessary.
 .
 This package contains the main application, including the standalone
 and the manual authenticators.
Homepage: https://certbot.eff.org/

Package: cloud-guest-utils
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 71
Maintainer: Debian Cloud Team <debian-cloud@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: cloud-utils
Version: 0.33-1
Depends: e2fsprogs, fdisk, python3:any
Recommends: gdisk
Suggests: cloud-init
Description: cloud guest utilities
 This package contains programs useful inside cloud instance.
 It contains 'growpart' for resizing a partition during boot, which is normally
 done with the aid of cloud-init.
Homepage: https://launchpad.net/cloud-utils

Package: cloud-image-utils
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 66
Maintainer: Debian Cloud Team <debian-cloud@lists.debian.org>
Architecture: all
Source: cloud-utils
Version: 0.33-1
Depends: ca-certificates, e2fsprogs, file, genisoimage, qemu-utils, wget, python3:any
Recommends: distro-info
Suggests: mtools
Description: cloud image management utilities
 This package provides a useful set of utilities for working with cloud
 images.  It contains tools to help in modifying cloud images, running, and
 querying data related to cloud-images.
Homepage: https://launchpad.net/cloud-utils

Package: cloud-init
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 2709
Maintainer: Debian Cloud Team <debian-cloud@lists.debian.org>
Architecture: all
Version: 22.4.2-1+deb12u4
Replaces: cloud-init-22.4.2
Depends: eject, fdisk | util-linux (<< 2.29.2-3~), gdisk, isc-dhcp-client, locales, lsb-base, lsb-release, procps, python3-configobj, python3-jinja2, python3-jsonpatch, python3-jsonschema, python3-netifaces, python3-oauthlib, python3-requests, python3-serial, python3-yaml, python3:any
Recommends: cloud-guest-utils, eatmydata, sudo
Suggests: btrfs-progs, e2fsprogs, xfsprogs
Conflicts: cloud-init-22.4.2
Conffiles:
 /etc/NetworkManager/dispatcher.d/cloud-init-hook-network-manager 5fe06610f28360e90a8c04febddd384b
 /etc/cloud/clean.d/README 022cf5eee551fc4956f021dac31dc939
 /etc/cloud/cloud.cfg 9d104b8d5b749eeec889fbc9263c8381
 /etc/cloud/cloud.cfg.d/05_logging.cfg b772a8bc0c407baba78b88e89d8fc743
 /etc/cloud/cloud.cfg.d/README f5175bd4df5c37ce781f93d20f59561a
 /etc/cloud/templates/chef_client.rb.tmpl a0844ddc9a42776d41a03d62d10ea139
 /etc/cloud/templates/chrony.conf.alpine.tmpl 9b5c5b4a39ae11562a5013812c11121d
 /etc/cloud/templates/chrony.conf.centos.tmpl 65413a48dedb31d23c93ac417e1a35e8
 /etc/cloud/templates/chrony.conf.cos.tmpl 9f97cb21d10890cc268f4382c3f11149
 /etc/cloud/templates/chrony.conf.debian.tmpl f6afc8fb02df02a7fad7672a67d34320
 /etc/cloud/templates/chrony.conf.fedora.tmpl 8f56d3a782ade6693badf3832775fc82
 /etc/cloud/templates/chrony.conf.freebsd.tmpl 8a975ac4cb5ee305bdcb9e0b5f600d90
 /etc/cloud/templates/chrony.conf.opensuse.tmpl b7ff0b11f9bded1fc0be5f8806152541
 /etc/cloud/templates/chrony.conf.photon.tmpl 8f56d3a782ade6693badf3832775fc82
 /etc/cloud/templates/chrony.conf.rhel.tmpl 65413a48dedb31d23c93ac417e1a35e8
 /etc/cloud/templates/chrony.conf.sles.tmpl b7ff0b11f9bded1fc0be5f8806152541
 /etc/cloud/templates/chrony.conf.ubuntu.tmpl 1ce60fc8d7ab2a82cdf3e572fb9709ff
 /etc/cloud/templates/host.mariner.tmpl 12321ebb370f349597bf08c8b66d870f
 /etc/cloud/templates/hosts.alpine.tmpl b376c1ff07007f078ee9580cca61432f
 /etc/cloud/templates/hosts.arch.tmpl 8721e41953e3d91348b3bb9a17208c1a
 /etc/cloud/templates/hosts.debian.tmpl 941773df489d046d87ae491c3c95d8ec
 /etc/cloud/templates/hosts.freebsd.tmpl b93d8b13209900227fd7e1731ae23b0c
 /etc/cloud/templates/hosts.gentoo.tmpl de3df962ed420b5fa8ad0b338b8f262b
 /etc/cloud/templates/hosts.photon.tmpl 236edf211d757237c91834a5316dd083
 /etc/cloud/templates/hosts.redhat.tmpl bd5a1edd50c1d8b27c5f51ed44040c19
 /etc/cloud/templates/hosts.suse.tmpl 7a535f28d538e6bccaaa4dd7b9dd13c8
 /etc/cloud/templates/ntp.conf.alpine.tmpl f7a7c7a340e07e36af23248317fb0c09
 /etc/cloud/templates/ntp.conf.debian.tmpl 4234ee67d84a3da62e0d97c7329668df
 /etc/cloud/templates/ntp.conf.fedora.tmpl eb6d3fe3d4ddebfe0e310843e8bbc82b
 /etc/cloud/templates/ntp.conf.freebsd.tmpl b61275698a566f98fa4610a17a8f3c60
 /etc/cloud/templates/ntp.conf.opensuse.tmpl e4bb5100b2dc442b6237ac7e1635acaa
 /etc/cloud/templates/ntp.conf.photon.tmpl 86295b29892a099d2b0a87461e81cf31
 /etc/cloud/templates/ntp.conf.rhel.tmpl 3437363e2f2dd82c94f8c787fc957ee8
 /etc/cloud/templates/ntp.conf.sles.tmpl e4bb5100b2dc442b6237ac7e1635acaa
 /etc/cloud/templates/ntp.conf.ubuntu.tmpl 645795fb4ef5d9801111f7d1eb27d91d
 /etc/cloud/templates/ntpd.conf.openbsd.tmpl 82dfebda546e4e023b0eec0993a58012
 /etc/cloud/templates/resolv.conf.tmpl a32413c9f622d5dfa784ef43e3e9e2be
 /etc/cloud/templates/sources.list.debian.tmpl a7e69f77a32f15648cee0423fd1ed2bd
 /etc/cloud/templates/sources.list.ubuntu.tmpl d6b118c48d33b72eb035f8c673292923
 /etc/cloud/templates/systemd.resolved.conf.tmpl a454bfaea86f3758d0078819985d711c
 /etc/cloud/templates/timesyncd.conf.tmpl 9c6b3af8058efc219987863f45bb9198
 /etc/dhcp/dhclient-exit-hooks.d/hook-dhclient aa6f407b6895c130f2809755373e739f
 /etc/init.d/cloud-config 5be7f09acfb69f71526a9c6c23c31e32
 /etc/init.d/cloud-final 15fc2d68231ce0929139589910314d99
 /etc/init.d/cloud-init 81e6e95a2d2c8a45ea5b1ac4bc11e491
 /etc/init.d/cloud-init-local 9bbb2ee504e1d08b1433fb85795bab7f
 /etc/profile.d/Z99-cloud-locale-test.sh ca1c7cfa9cf8f9192f3d44f74708e01f
 /etc/systemd/system/sshd-keygen@.service.d/disable-sshd-keygen-if-cloud-init-active.conf e7c2c31c4ceae9e9a4a5c4ef1c165727
Description: initialization system for infrastructure cloud instances
 Cloud-init provides a framework and tool to configure and customize virtual
 machine instances for Infrastructure-as-a-Service (IaaS) clouds platforms. It
 can for example set a default locale and hostname, generate SSH private host
 keys, install SSH public keys for logging into a default account, set up
 ephemeral mount points, and run user-provided scripts.
 .
 Various methods are supported for passing data to the instance at launch
 time, including the standard interfaces of multiple platforms.
Homepage: https://launchpad.net/cloud-init

Package: cloud-initramfs-growroot
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 21
Maintainer: Debian Cloud <debian-cloud@lists.debian.org>
Architecture: all
Source: cloud-initramfs-tools
Version: 0.18.debian13+deb12u1
Depends: cloud-utils (>= 0.26-2~), initramfs-tools, fdisk | util-linux (<< 2.29.2-3~)
Description: automatically resize the root partition on first boot
 This package adds functionality to an initramfs built by initramfs-tools.
 When installed, the initramfs will repartition a disk to make the
 root volume consume all space that follows it.
 .
 You most likely do not want this package unless you know what you are
 doing.  It is primarily interesting in a virtualized environment when
 a disk can provisioned with a size larger than its original size.
 In this case, with this package installed, you can automatically use
 the new space without requiring a reboot to re-read the partition table.
Homepage: http://launchpad.net/cloud-initramfs-tools

Package: cloud-utils
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 20
Maintainer: Debian Cloud Team <debian-cloud@lists.debian.org>
Architecture: all
Version: 0.33-1
Depends: cloud-guest-utils, cloud-image-utils
Description: metapackage for installation of upstream cloud-utils source
 This metapackage will depend on all sub-packages built by the
 upstream cloud-utils source.
Homepage: https://launchpad.net/cloud-utils

Package: containerd.io
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 86360
Maintainer: Containerd team <help@containerd.io>
Architecture: amd64
Version: 2.3.3-1~debian.12~bookworm
Replaces: containerd, runc
Provides: containerd, runc
Depends: libc6 (>= 2.34), libseccomp2 (>= 2.5.0)
Conflicts: containerd, runc
Conffiles:
 /etc/containerd/config.toml 1d862b12f2cb082816175b28ee501789
Description: An open and reliable container runtime
Homepage: https://containerd.io

Package: coreutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 18062
Maintainer: Michael Stone <mstone@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 9.1-1
Pre-Depends: libacl1 (>= 2.2.23), libattr1 (>= 1:2.4.44), libc6 (>= 2.34), libgmp10 (>= 2:6.2.1+dfsg1), libselinux1 (>= 3.1~)
Description: GNU core utilities
 This package contains the basic file, shell and text manipulation
 utilities which are expected to exist on every operating system.
 .
 Specifically, this package includes:
 arch base64 basename cat chcon chgrp chmod chown chroot cksum comm cp
 csplit cut date dd df dir dircolors dirname du echo env expand expr
 factor false flock fmt fold groups head hostid id install join link ln
 logname ls md5sum mkdir mkfifo mknod mktemp mv nice nl nohup nproc numfmt
 od paste pathchk pinky pr printenv printf ptx pwd readlink realpath rm
 rmdir runcon sha*sum seq shred sleep sort split stat stty sum sync tac
 tail tee test timeout touch tr true truncate tsort tty uname unexpand
 uniq unlink users vdir wc who whoami yes
Homepage: http://gnu.org/software/coreutils

Package: cpio
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 1141
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.13+dfsg-7.1
Replaces: cpio-mt
Depends: libc6 (>= 2.34)
Suggests: libarchive-dev
Conflicts: cpio-mt, mt-st (<< 0.6)
Description: GNU cpio -- a program to manage archives of files
 GNU cpio is a tool for creating and extracting archives, or copying
 files from one place to another.  It handles a number of cpio formats
 as well as reading and writing tar files.
Homepage: https://www.gnu.org/software/cpio/

Package: cpp
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 30
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: gcc-defaults (1.203)
Version: 4:12.2.0-3
Depends: cpp-12 (>= 12.2.0-1~)
Suggests: cpp-doc
Conflicts: cpp-doc (<< 1:2.95.3)
Description: GNU C preprocessor (cpp)
 The GNU C preprocessor is a macro processor that is used automatically
 by the GNU C compiler to transform programs before actual compilation.
 .
 This package has been separated from gcc for the benefit of those who
 require the preprocessor but not the compiler.
 .
 This is a dependency package providing the default GNU C preprocessor.

Package: cpp-12
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 33848
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Source: gcc-12
Version: 12.2.0-14+deb12u1
Depends: gcc-12-base (= 12.2.0-14+deb12u1), libc6 (>= 2.36), libgmp10 (>= 2:6.2.1+dfsg1), libisl23 (>= 0.15), libmpc3 (>= 1.1.0), libmpfr6 (>= 3.1.3), libzstd1 (>= 1.5.2), zlib1g (>= 1:1.1.4)
Suggests: gcc-12-locales (>= 12), cpp-12-doc (>= 12)
Breaks: hardening-wrapper (<< 2.8+nmu3), libmagics++-dev (<< 2.28.0-4)
Description: GNU C preprocessor
 A macro processor that is used automatically by the GNU C compiler
 to transform programs before actual compilation.
 .
 This package has been separated from gcc for the benefit of those who
 require the preprocessor but not the compiler.
Homepage: http://gcc.gnu.org/

Package: cron
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 217
Maintainer: Javier Fernández-Sanguino Peña <jfs@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 3.0pl1-162
Replaces: bcron, cronie, systemd-cron
Provides: cron-daemon
Depends: libc6 (>= 2.34), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), sensible-utils, libpam-runtime
Pre-Depends: init-system-helpers (>= 1.54~), cron-daemon-common
Recommends: default-mta | mail-transport-agent
Suggests: anacron, logrotate, checksecurity
Conflicts: bcron, cronie, systemd-cron
Conffiles:
 /etc/default/cron eae0d979b5007d2af41540d8c2631359
 /etc/init.d/cron 4824366b523de668591f5b6e258c7043
 /etc/pam.d/cron 11e788a7f7cd5477b10da2c7fd5ecdf0
Description: process scheduling daemon
 The cron daemon is a background process that runs particular programs at
 particular times (for example, every minute, day, week, or month), as
 specified in a crontab. By default, users may also create crontabs of
 their own so that processes are run on their behalf.
 .
 Output from the commands is usually mailed to the system administrator
 (or to the user in question); you should probably install a mail system
 as well so that you can receive these messages.
 .
 This cron package does not provide any system maintenance tasks. Basic
 periodic maintenance tasks are provided by other packages, such
 as checksecurity.
Homepage: https://ftp.isc.org/isc/cron/

Package: cron-daemon-common
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 44
Maintainer: Javier Fernández-Sanguino Peña <jfs@debian.org>
Architecture: all
Source: cron
Version: 3.0pl1-162
Replaces: bcron (<< 0.11-9.1), cron (<< 3.0pl1-140), cronie (<< 1.6.1-5), systemd-cron (<< 1.15.18-1.1)
Depends: adduser
Breaks: systemd-cron (<< 1.15.19-5~)
Conflicts: bcron (<< 0.11-9.1), cron (<< 3.0pl1-140), cronie (<< 1.6.1-5), systemd-cron (<< 1.15.18-1.1)
Conffiles:
 /etc/cron.d/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.daily/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.hourly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.monthly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.weekly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.yearly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/crontab db66112a5d1014af79fd8077170ddcfa
Description: process scheduling daemon's configuration files
 The cron daemon is a background process that runs particular programs at
 particular times (for example, every minute, day, week, or month), as
 specified in a crontab. By default, users may also create crontabs of
 their own so that processes are run on their behalf.
 .
 This package provides configuration files which must be there to
 define scheduled process sets.
Homepage: https://ftp.isc.org/isc/cron/

Package: curl
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 489
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 7.88.1-10+deb12u15
Depends: libc6 (>= 2.34), libcurl4 (= 7.88.1-10+deb12u15), zlib1g (>= 1:1.1.4)
Description: command line tool for transferring data with URL syntax
 curl is a command line tool for transferring data with URL syntax, supporting
 DICT, FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3,
 POP3S, RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 curl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP form
 based upload, proxies, cookies, user+password authentication (Basic, Digest,
 NTLM, Negotiate, kerberos...), file transfer resume, proxy tunneling and a
 busload of other useful tricks.
Homepage: https://curl.se/

Package: dash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 191
Maintainer: Andrej Shadura <andrewsh@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 0.5.12-2
Depends: debianutils (>= 5.6-0.1), dpkg (>= 1.19.1)
Pre-Depends: libc6 (>= 2.34)
Description: POSIX-compliant shell
 The Debian Almquist Shell (dash) is a POSIX-compliant shell derived
 from ash.
 .
 Since it executes scripts faster than bash, and has fewer library
 dependencies (making it more robust against software or hardware
 failures), it is used as the default system shell on Debian systems.
Homepage: http://gondor.apana.org.au/~herbert/dash/

Package: dbus
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 182
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.14.10-1~deb12u1
Provides: dbus-system-bus (= 1.14.10-1~deb12u1), default-dbus-system-bus
Depends: dbus-bin (= 1.14.10-1~deb12u1), dbus-daemon (= 1.14.10-1~deb12u1), dbus-system-bus-common (>= 1.14.10-1~deb12u1), libc6 (>= 2.34), libdbus-1-3 (= 1.14.10-1~deb12u1), libexpat1 (>= 2.1~beta3), libsystemd0
Pre-Depends: init-system-helpers (>= 1.54~)
Suggests: default-dbus-session-bus | dbus-session-bus
Conffiles:
 /etc/default/dbus 0d0f25a2f993509c857eb262f6e22015
 /etc/init.d/dbus d78b20b35de983cf6f1475dcf8cb21a1
Description: simple interprocess messaging system (system message bus)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more. It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML. D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 It comes with several bindings, including GLib, Python, Qt and Java.
 .
 This package provides a fully-functional D-Bus system bus with activation
 support, used for communication between system services, and depends on
 most of the other components of the reference implementation of D-Bus.
 .
 To provide a complete D-Bus session bus, install one of the packages
 that implement the dbus-session-bus virtual package, such as
 dbus-user-session. The recommended implementation is indicated by
 the default-dbus-session-bus virtual package.
Homepage: https://dbus.freedesktop.org/

Package: dbus-bin
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 213
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: dbus
Version: 1.14.10-1~deb12u1
Replaces: dbus (<< 1.13.18-2~)
Depends: libc6 (>= 2.34), libdbus-1-3 (= 1.14.10-1~deb12u1)
Breaks: dbus (<< 1.13.18-2~)
Description: simple interprocess messaging system (command line utilities)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package contains the D-Bus command-line utilities such as dbus-send
 and dbus-monitor.
Homepage: https://dbus.freedesktop.org/

Package: dbus-daemon
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 375
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: dbus
Version: 1.14.10-1~deb12u1
Replaces: dbus (<< 1.13.18-2~)
Depends: dbus-bin (= 1.14.10-1~deb12u1), dbus-session-bus-common (>= 1.14.10-1~deb12u1), libapparmor1 (>= 2.8.94), libaudit1 (>= 1:2.2.1), libc6 (>= 2.34), libcap-ng0 (>= 0.7.9), libdbus-1-3 (= 1.14.10-1~deb12u1), libexpat1 (>= 2.1~beta3), libselinux1 (>= 3.1~), libsystemd0
Breaks: dbus (<< 1.13.18-2~)
Description: simple interprocess messaging system (reference message bus)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package contains dbus-daemon, the reference implementation of a
 D-Bus message bus, and dbus-run-session, a utility to start a temporary
 session dbus-daemon in a constrained environment or for automated tests.
 .
 To provide a complete D-Bus session bus, install one of the packages
 that implement the dbus-session-bus virtual package, such as
 dbus-user-session. The recommended implementation is indicated by
 the default-dbus-session-bus virtual package.
Homepage: https://dbus.freedesktop.org/

Package: dbus-session-bus-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 107
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: dbus
Version: 1.14.10-1~deb12u1
Replaces: dbus (<< 1.13.18-2~)
Breaks: dbus (<< 1.13.18-2~)
Description: simple interprocess messaging system (session bus configuration)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package contains the configuration files defining the behaviour of
 the D-Bus session bus, used for applications and per-user services.
 These are used by the reference implementation in the dbus package,
 and by the reimplementation in the dbus-broker package.
 .
 To provide a complete D-Bus session bus, install one of the packages
 that implement the dbus-session-bus virtual package, such as
 dbus-user-session. The recommended implementation is indicated by
 the default-dbus-session-bus virtual package.
Homepage: https://dbus.freedesktop.org/

Package: dbus-system-bus-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 119
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: dbus
Version: 1.14.10-1~deb12u1
Replaces: dbus (<< 1.13.18-2~)
Depends: adduser
Breaks: dbus (<< 1.13.18-2~)
Description: simple interprocess messaging system (system bus configuration)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package contains the configuration files defining the behaviour of
 the D-Bus system bus, used for system services such as networking and
 storage management services. It is also responsible for creating the
 'messagebus' system user account used to run the system bus.
 These are used by the reference implementation in the dbus package,
 and by the reimplementation in the dbus-broker package.
 .
 To provide a complete D-Bus system bus, install one of the packages
 that implement the dbus-system-bus virtual package, such as dbus.
 The recommended implementation is indicated by the default-dbus-system-bus
 virtual package.
Homepage: https://dbus.freedesktop.org/

Package: dbus-user-session
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 111
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: dbus
Version: 1.14.10-1~deb12u1
Provides: dbus-session-bus, default-dbus-session-bus
Depends: dbus-daemon (= 1.14.10-1~deb12u1) | dbus-broker, dbus-session-bus-common (>= 1.14.10-1~deb12u1), libpam-systemd, systemd
Recommends: systemd-sysv
Conffiles:
 /etc/X11/Xsession.d/20dbus_xdg-runtime f11c70d9f51a152cedf939d36ef038bf
Description: simple interprocess messaging system (systemd --user integration)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 On systemd systems, this package opts in to the session model in which
 a user's session starts the first time they log in, and does not end
 until all their login sessions have ended. This model merges all
 parallel non-graphical login sessions (text mode, ssh, cron, etc.), and up
 to one graphical session, into a single "user-session" or "super-session"
 within which all background D-Bus services are shared.
 .
 Multiple graphical sessions per user are not currently supported in this
 mode; as a result, it is particularly suitable for gdm, which responds to
 requests to open a parallel graphical session by switching to the existing
 graphical session and unlocking it.
 .
 To retain dbus' traditional session semantics, in which login sessions
 are artificially isolated from each other, remove this package and install
 dbus-x11 instead.
 .
 See the dbus package description for more information about D-Bus in general.
Homepage: https://dbus.freedesktop.org/

Package: debconf
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 491
Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.5.82
Replaces: debconf-tiny
Provides: debconf-2.0
Recommends: apt-utils, debconf-i18n
Suggests: debconf-doc, debconf-kde-helper, debconf-utils, libgtk3-perl, libnet-ldap-perl, libterm-readline-gnu-perl, perl, whiptail | dialog
Conflicts: debconf-tiny, whiptail-utf8 (<= 0.50.17-13)
Conffiles:
 /etc/apt/apt.conf.d/70debconf 7e9d09d5801a42b4926b736b8eeabb73
 /etc/debconf.conf 8c0619be413824f1fc7698cee0f23811
Description: Debian configuration management system
 Debconf is a configuration management system for debian packages. Packages
 use Debconf to ask questions when they are installed.

Package: debian-archive-keyring
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 293
Maintainer: Debian Release Team <packages@release.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2023.3+deb12u2
Conffiles:
 /etc/apt/trusted.gpg.d/debian-archive-bookworm-automatic.asc 55eec060916a9d4a0db7560ab4d7bdce
 /etc/apt/trusted.gpg.d/debian-archive-bookworm-security-automatic.asc bec0a1224f667bcd1e231b874db9bc4f
 /etc/apt/trusted.gpg.d/debian-archive-bookworm-stable.asc fac2ec9faba2c2d82c70a6e2805c5b79
 /etc/apt/trusted.gpg.d/debian-archive-bullseye-automatic.asc 1f30ce1ba8532d523017acb1a69c106a
 /etc/apt/trusted.gpg.d/debian-archive-bullseye-security-automatic.asc 9fbe7b0d8ebb38e240aeec6b0830ac7b
 /etc/apt/trusted.gpg.d/debian-archive-bullseye-stable.asc 85a4c0e5c747a38509b33562d4c950be
 /etc/apt/trusted.gpg.d/debian-archive-trixie-automatic.asc 556202307f6f23e343c1ba12790507be
 /etc/apt/trusted.gpg.d/debian-archive-trixie-security-automatic.asc f421db9e00d9a98c66c396b2a210f52c
 /etc/apt/trusted.gpg.d/debian-archive-trixie-stable.asc 91c5c0b4f6878239622087c64866c909
Description: GnuPG archive keys of the Debian archive
 The Debian project digitally signs its Release files. This package
 contains the archive keys used for that.

Package: debianutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 243
Maintainer: Clint Adams <clint@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 5.7-0.5~deb12u1
Pre-Depends: libc6 (>= 2.34)
Breaks: ifupdown (<< 0.8.36+nmu1), printer-driver-pnm2ppa (<< 1.13-12), x11-common (<< 1:7.7+23~)
Description: Miscellaneous utilities specific to Debian
 This package provides a number of small utilities which are used
 primarily by the installation scripts of Debian packages, although
 you may use them directly.
 .
 The specific utilities included are:
 add-shell installkernel ischroot remove-shell run-parts savelog
 update-shells which

Package: diffutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 1598
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: amd64
Version: 1:3.8-4
Replaces: diff
Pre-Depends: libc6 (>= 2.34)
Suggests: diffutils-doc, wdiff
Description: File comparison utilities
 The diffutils package provides the diff, diff3, sdiff, and cmp programs.
 .
 `diff' shows differences between two files, or each corresponding file
 in two directories.  `cmp' shows the offsets and line numbers where
 two files differ.  `cmp' can also show all the characters that
 differ between the two files, side by side.  `diff3' shows differences
 among three files.  `sdiff' merges two files interactively.
 .
 The set of differences produced by `diff' can be used to distribute
 updates to text files (such as program source code) to other people.
 This method is especially useful when the differences are small compared
 to the complete files.  Given `diff' output, the `patch' program can
 update, or "patch", a copy of the file.
Homepage: https://www.gnu.org/software/diffutils/

Package: dirmngr
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1329
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.40-1.1+deb12u2
Replaces: gnupg2 (<< 2.1.10-2)
Depends: adduser, gpgconf (= 2.2.40-1.1+deb12u2), lsb-base (>= 3.2-13), init-system-helpers (>= 1.52), libassuan0 (>= 2.5.0), libc6 (>= 2.34), libgcrypt20 (>= 1.10.0), libgnutls30 (>= 3.7.5), libgpg-error0 (>= 1.42), libksba8 (>= 1.3.5), libldap-2.5-0 (>= 2.5.4), libnpth0 (>= 0.90)
Recommends: gnupg (= 2.2.40-1.1+deb12u2)
Suggests: dbus-user-session, libpam-systemd, pinentry-gnome3, tor
Breaks: gnupg2 (<< 2.1.10-2)
Enhances: gpg, gpgsm, squid
Description: GNU privacy guard - network certificate management service
 dirmngr is a server for managing and downloading OpenPGP and X.509
 certificates, as well as updates and status signals related to those
 certificates.  For OpenPGP, this means pulling from the public
 HKP/HKPS keyservers, or from LDAP servers.  For X.509 this includes
 Certificate Revocation Lists (CRLs) and Online Certificate Status
 Protocol updates (OCSP).  It is capable of using Tor for network
 access.
 .
 dirmngr is used for network access by gpg, gpgsm, and dirmngr-client,
 among other tools.  Unless this package is installed, the parts of
 the GnuPG suite that try to interact with the network will fail.
Homepage: https://www.gnupg.org/

Package: distro-info-data
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 19
Maintainer: Benjamin Drung <bdrung@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.58+deb12u7
Breaks: distro-info (<< 1.0~)
Description: information about the distributions' releases (data files)
 Information about all releases of Debian and Ubuntu. The distro-info script
 will give you the codename for e.g. the latest stable release of your
 distribution. To get information about a specific distribution there are the
 debian-distro-info and the ubuntu-distro-info scripts.
 .
 This package contains the data files.

Package: dkms
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 186
Maintainer: Dynamic Kernel Module System Team <dkms@packages.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 3.0.10-8+deb12u1
Provides: dkms-autopkgtest (= 3.0.10-8+deb12u1)
Depends: kmod | kldutils, gcc | c-compiler, dpkg-dev, make | build-essential, patch
Pre-Depends: lsb-release
Recommends: fakeroot, sudo, linux-headers-generic | linux-headers-686-pae | linux-headers-amd64 | linux-headers
Suggests: menu, e2fsprogs
Breaks: blcr-dkms (<< 0.8.6~b3-1.0), blktap-dkms (<< 2.0.93-0.10.0), oss4-dkms (<< 4.2-build2020-1~), sl-modem-dkms (<< 2.9.11~20110321-16.0)
Conffiles:
 /etc/dkms/framework.conf b56bf08b839740ca019a2ed75a30e4c5
 /etc/kernel/header_postinst.d/dkms 079a9806807dd2d31db9aa06c26361c3
 /etc/kernel/install.d/dkms 7a52b8bdfe0ffa26b30be23adbf03d69
 /etc/kernel/postinst.d/dkms 079a9806807dd2d31db9aa06c26361c3
 /etc/kernel/prerm.d/dkms a8c25542e7ba08eab22a4c483d384829
 /etc/modprobe.d/dkms.conf 74452a1f23577a0bb30d764a895429d0
Description: Dynamic Kernel Module System (DKMS)
 DKMS is a framework designed to allow individual kernel modules to be upgraded
 without changing the whole kernel. It is also very easy to rebuild modules as
 you upgrade kernels.
Homepage: https://github.com/dell/dkms

Package: dmidecode
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 221
Maintainer: Jörg Frings-Fürst <debian@jff.email>
Architecture: amd64
Multi-Arch: foreign
Version: 3.4-1
Depends: libc6 (>= 2.33)
Description: SMBIOS/DMI table decoder
 Dmidecode reports information about the system's hardware as described in the
 system BIOS according to the SMBIOS/DMI standard.
 .
 This information typically includes system manufacturer, model name, serial
 number, BIOS version, asset tag as well as a lot of other details of varying
 level of interest and reliability depending on the manufacturer. This will
 often include usage status for the CPU sockets, expansion slots (e.g. AGP, PCI,
 ISA) and memory module slots, and the list of I/O ports (e.g. serial, parallel,
 USB).
 .
 Beware that DMI data have proven to be too unreliable to be blindly trusted.
 Dmidecode does not scan the hardware, it only reports what the BIOS told it to.
Homepage: https://nongnu.org/dmidecode/

Package: dmsetup
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 246
Maintainer: Debian LVM Team <team+lvm@tracker.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: lvm2 (2.03.16-2)
Version: 2:1.02.185-2
Depends: libc6 (>= 2.34), libdevmapper1.02.1 (>= 2:1.02.181)
Description: Linux Kernel Device Mapper userspace library
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but software raid,
 and other drivers that create "virtual" block devices.
 .
 This package contains a utility for modifying device mappings.
Homepage: https://sourceware.org/lvm2/

Package: dnsutils
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 24
Maintainer: Debian DNS Team <team+dns@tracker.debian.org>
Architecture: all
Source: bind9
Version: 1:9.18.49-1~deb12u2
Depends: bind9-dnsutils
Description: Transitional package for bind9-dnsutils
 This is a transitional package. It can safely be removed.
Homepage: https://www.isc.org/downloads/bind/

Package: docker-buildx-plugin
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 70802
Maintainer: Docker <support@docker.com>
Architecture: amd64
Version: 0.36.1-1~debian.12~bookworm
Replaces: docker-ce-cli
Enhances: docker-ce-cli
Description: Docker Buildx plugin extends build capabilities with BuildKit.
Homepage: https://github.com/docker/buildx

Package: docker-ce
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 109872
Maintainer: Docker <support@docker.com>
Architecture: amd64
Version: 5:29.7.2-1~debian.12~bookworm
Replaces: docker-ce-cli (<< 5:28.0.0)
Depends: containerd.io (>= 2.1.5), docker-ce-cli, iptables, nftables, libc6 (>= 2.34), libsystemd0
Pre-Depends: init-system-helpers (>= 1.54~)
Recommends: apparmor, ca-certificates, docker-ce-rootless-extras, git, pigz, procps, xz-utils
Suggests: cgroupfs-mount | cgroup-lite
Conflicts: docker.io
Conffiles:
 /etc/default/docker 01f06689327cb8ded58332709d28670c
 /etc/init.d/docker 4d456f2a4d37184f6ae185a400058582
Description: Docker: the open-source application container engine
 Docker is a product for you to build, ship and run any application as a
 lightweight container
 .
 Docker containers are both hardware-agnostic and platform-agnostic. This means
 they can run anywhere, from your laptop to the largest cloud compute instance
 and everything in between - and they don't require you to use a particular
 language, framework or packaging system. That makes them great building blocks
 for deploying and scaling web apps, databases, and backend services without
 depending on a particular stack or provider.
Homepage: https://www.docker.com

Package: docker-ce-cli
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 44812
Maintainer: Docker <support@docker.com>
Architecture: amd64
Source: docker-ce
Version: 5:29.7.2-1~debian.12~bookworm
Replaces: docker-ce (<< 5:0)
Depends: libc6 (>= 2.34)
Recommends: docker-buildx-plugin, docker-compose-plugin
Suggests: docker-model-plugin
Breaks: docker-ce (<< 5:0)
Conflicts: docker-cli, docker.io
Description: Docker CLI: the open-source application container engine
 Docker is a product for you to build, ship and run any application as a
 lightweight container
 .
 Docker containers are both hardware-agnostic and platform-agnostic. This means
 they can run anywhere, from your laptop to the largest cloud compute instance
 and everything in between - and they don't require you to use a particular
 language, framework or packaging system. That makes them great building blocks
 for deploying and scaling web apps, databases, and backend services without
 depending on a particular stack or provider.
Homepage: https://www.docker.com

Package: docker-ce-rootless-extras
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 25415
Maintainer: Docker <support@docker.com>
Architecture: amd64
Source: docker-ce
Version: 5:29.7.2-1~debian.12~bookworm
Replaces: rootlesskit
Depends: dbus-user-session, libc6 (>= 2.34)
Breaks: rootlesskit
Conflicts: rootlesskit
Enhances: docker-ce
Description: Rootless support for Docker.
 Use dockerd-rootless.sh to run the daemon.
 Use dockerd-rootless-setuptool.sh to setup systemd for dockerd-rootless.sh.
Homepage: https://docs.docker.com/go/rootless/

Package: docker-compose-plugin
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 48297
Maintainer: Docker <support@docker.com>
Architecture: amd64
Version: 5.5.0-1~debian.12~bookworm
Recommends: docker-buildx-plugin (>= 0.17.0)
Enhances: docker-ce-cli
Description: Docker Compose (V2) plugin for the Docker CLI.
 .
 This plugin provides the 'docker compose' subcommand.
 .
 The binary can also be run standalone as a direct replacement for
 Docker Compose V1 ('docker-compose').
Homepage: https://github.com/docker/compose

Package: dpkg
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 6409
Maintainer: Dpkg Developers <debian-dpkg@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.21.23
Depends: tar (>= 1.28-1)
Pre-Depends: libbz2-1.0, libc6 (>= 2.34), liblzma5 (>= 5.4.0), libmd0 (>= 0.0.0), libselinux1 (>= 3.1~), libzstd1 (>= 1.5.2), zlib1g (>= 1:1.1.4)
Suggests: apt, debsig-verify
Breaks: libapt-pkg5.0 (<< 1.7~b), lsb-base (<< 10.2019031300)
Conffiles:
 /etc/alternatives/README 7be88b21f7e386c8d5a8790c2461c92b
 /etc/cron.daily/dpkg 94bb6c1363245e46256908a5d52ba4fb
 /etc/dpkg/dpkg.cfg f4413ffb515f8f753624ae3bb365b81b
 /etc/logrotate.d/alternatives 5fe0af6ce1505fefdc158d9e5dbf6286
 /etc/logrotate.d/dpkg 9e25c8505966b5829785f34a548ae11f
Description: Debian package management system
 This package provides the low-level infrastructure for handling the
 installation and removal of Debian software packages.
 .
 For Debian package development tools, install dpkg-dev.
Homepage: https://wiki.debian.org/Teams/Dpkg

Package: dpkg-dev
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1728
Maintainer: Dpkg Developers <debian-dpkg@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: dpkg
Version: 1.21.23
Depends: perl:any, libdpkg-perl (= 1.21.23), tar (>= 1.28-1), bzip2, xz-utils (>= 5.4.0), patch (>= 2.7), make, binutils
Recommends: build-essential, gcc | c-compiler, fakeroot, gnupg | sq | sqop | pgpainless-cli, gpgv | sq | sqop | pgpainless-cli, libalgorithm-merge-perl
Suggests: debian-keyring
Breaks: debhelper (<< 10.10.1~), libsop-java-java (<< 4.0.7~), pgpainless-cli (<< 1.3.13~), sq (<< 0.25.0~), sqop (<< 0.27.2~)
Conffiles:
 /etc/dpkg/shlibs.default 1a2b9d0a869e2aa885ae3621c557fb95
 /etc/dpkg/shlibs.override 84b1e69080569cc5c613a50887af5200
Description: Debian package development tools
 This package provides the development tools (including dpkg-source)
 required to unpack, build and upload Debian source packages.
 .
 Most Debian source packages will require additional tools to build;
 for example, most packages need make and the C compiler gcc.
Homepage: https://wiki.debian.org/Teams/Dpkg

Package: e2fsprogs
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1497
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: foreign
Source: e2fsprogs (1.47.0-2)
Version: 1.47.0-2+b2
Depends: logsave
Pre-Depends: libblkid1 (>= 2.36), libc6 (>= 2.34), libcom-err2 (>= 1.43.9), libext2fs2 (= 1.47.0-2+b2), libss2 (>= 1.38), libuuid1 (>= 2.16)
Recommends: e2fsprogs-l10n
Suggests: gpart, parted, fuse2fs, e2fsck-static
Conffiles:
 /etc/cron.d/e2scrub_all bc533e09f3b3d96bfe1633ad57eb7026
 /etc/e2scrub.conf df38534cc670c70a91cf9b035845d244
 /etc/mke2fs.conf 6a2103e33d9e48b5f6f3190045c37561
Description: ext2/ext3/ext4 file system utilities
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package contains programs for creating, checking, and maintaining
 ext2/3/4-based file systems.  It also includes the "badblocks" program,
 which can be used to scan for bad blocks on a disk or other storage device.
Homepage: http://e2fsprogs.sourceforge.net
Important: yes

Package: eject
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 132
Maintainer: util-linux packagers <util-linux@packages.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.38.1-5+deb12u3
Depends: libc6 (>= 2.34), libmount1 (>= 2.24.2)
Description: ejects CDs and operates CD-Changers under Linux
 This program will eject CD-ROMs (assuming your drive supports the CDROMEJECT
 ioctl). It also allows setting the autoeject feature.
 .
 On supported ATAPI/IDE multi-disc CD-ROM changers, it allows changing
 the active disc.
 .
 You can also use eject to properly disconnect external mass-storage
 devices like digital cameras or portable music players.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/

Package: ethtool
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 668
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Version: 1:6.1-1
Depends: libc6 (>= 2.34), libmnl0 (>= 1.0.3-4~)
Conffiles:
 /etc/network/if-pre-up.d/ethtool 39693276fe35fccec75f610cb71d3e85
 /etc/network/if-up.d/ethtool b0d11ba5983c8c5990bb9933c35a3ec5
Description: display or change Ethernet device settings
 ethtool can be used to query and change settings such as speed, auto-
 negotiation and checksum offload on many network devices, especially
 Ethernet devices.
Homepage: https://www.kernel.org/pub/software/network/ethtool/

Package: exim4-base
Status: install ok installed
Priority: optional
Section: mail
Installed-Size: 1671
Maintainer: Exim4 Maintainers <pkg-exim4-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: exim4
Version: 4.96-15+deb12u10
Replaces: exim, exim-tls, exim4-daemon-custom, exim4-daemon-heavy, exim4-daemon-light
Depends: adduser, cron | cron-daemon | anacron | systemd-sysv, exim4-config (>= 4.94) | exim4-config-2, netbase, debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.34), libdb5.3
Recommends: bsd-mailx | mailx, psmisc
Suggests: exim4-doc-html | exim4-doc-info, eximon4, file, gnutls-bin | openssl, mail-reader, spf-tools-perl, swaks
Breaks: exim4-daemon-custom (<< 4.96), exim4-daemon-heavy (<< 4.96), exim4-daemon-light (<< 4.96)
Conflicts: exim, exim-tls
Conffiles:
 /etc/cron.daily/exim4-base 0a2e69b6b6cb71430ba4beb14dc7f589
 /etc/init.d/exim4 fb949a840816905d1297f69b61eeb154
 /etc/logrotate.d/exim4-base 4d781cffa032e64fb3c5653335609ae4
 /etc/logrotate.d/exim4-paniclog d48b0301871643773ad3c2a63984241b
Description: support files for all Exim MTA (v4) packages
 Exim (v4) is a mail transport agent. exim4-base provides the support
 files needed by all exim4 daemon packages. You need an additional package
 containing the main executable. The available packages are:
 .
  exim4-daemon-light
  exim4-daemon-heavy
 .
 If you build exim4 from the source package locally, you can also
 build an exim4-daemon-custom package tailored to your own feature set.
 .
 The Debian exim4 packages have their own web page,
 http://wiki.debian.org/PkgExim4. There is also a Debian-specific
 FAQ list. Information about the way the Debian packages are
 configured can be found in
 /usr/share/doc/exim4-base/README.Debian.gz, which additionally contains
 information about the way the Debian binary packages are built. The
 very extensive upstream documentation is shipped in
 /usr/share/doc/exim4-base/spec.txt.gz. To repeat the debconf-driven
 configuration process in a standard setup, invoke dpkg-reconfigure
 exim4-config. There is a Debian-centered mailing list,
 pkg-exim4-users@lists.alioth.debian.org. Please ask Debian-specific
 questions there, and only write to the upstream exim-users mailing
 list if you are sure that your question is not Debian-specific. You
 can find the subscription web page on
 http://lists.alioth.debian.org/mailman/listinfo/pkg-exim4-users
Homepage: https://www.exim.org/

Package: exim4-config
Status: install ok installed
Priority: optional
Section: mail
Installed-Size: 920
Maintainer: Exim4 Maintainers <pkg-exim4-maintainers@lists.alioth.debian.org>
Architecture: all
Source: exim4
Version: 4.96-15+deb12u10
Provides: exim4-config-2
Depends: adduser, debconf (>= 0.5) | debconf-2.0
Recommends: ca-certificates
Breaks: exim4-daemon-heavy (<< 4.94), exim4-daemon-light (<< 4.94)
Conflicts: citadel-server, courier-mta, dma, esmtp-run, exim, exim-tls, exim4-config, exim4-config-2, hula-mta, masqmail, msmtp-mta, mta-dummy, nullmailer, opensmtpd, postfix, qmail-run, sendmail-bin, smail, ssmtp, xmail, zmailer
Conffiles:
 /etc/email-addresses 6bea09fbb18e4676012105fa5fc726c6
 /etc/exim4/conf.d/acl/00_exim4-config_header e572a7b9954b20950242db2a92b35044
 /etc/exim4/conf.d/acl/20_exim4-config_local_deny_exceptions 516070107501d48a3106d755cb199e95
 /etc/exim4/conf.d/acl/30_exim4-config_check_mail bbe4979288d9cd20868d13ca01e6bfc3
 /etc/exim4/conf.d/acl/30_exim4-config_check_rcpt d75f6a32ddb7c1d7e5926d8f52378309
 /etc/exim4/conf.d/acl/40_exim4-config_check_data ef4e89a4da7150ed05ee350b388d7dc9
 /etc/exim4/conf.d/auth/00_exim4-config_header d0ee6ea0b33d9796573bb024ffca20d4
 /etc/exim4/conf.d/auth/30_exim4-config_examples eb282950f43dd4a801064e2d87b21517
 /etc/exim4/conf.d/main/01_exim4-config_listmacrosdefs b883950ef2581f980d43bea65426870b
 /etc/exim4/conf.d/main/02_exim4-config_options a46cef268a1981a735df77d1f3b4d782
 /etc/exim4/conf.d/main/03_exim4-config_tlsoptions 09f6974bf1bbdb03307b0bb88c113613
 /etc/exim4/conf.d/main/90_exim4-config_log_selector 888348df8f7bd25a0a77d3c05e8fffe3
 /etc/exim4/conf.d/retry/00_exim4-config_header 309f5bf0859ad91e03c5402d6afe6895
 /etc/exim4/conf.d/retry/30_exim4-config d45d612ffd0ce651fab5e953d61f7524
 /etc/exim4/conf.d/rewrite/00_exim4-config_header d98361da23f34490d191bf2280728dec
 /etc/exim4/conf.d/rewrite/31_exim4-config_rewriting a293d4c1007ffc86ff1124c84c998f01
 /etc/exim4/conf.d/router/00_exim4-config_header c0ecc395e9a49487b484126cac4d9559
 /etc/exim4/conf.d/router/100_exim4-config_domain_literal d0184d959778b1bb20155912b583d362
 /etc/exim4/conf.d/router/150_exim4-config_hubbed_hosts 1d4a3bab1738f10f931b73ad60c7bb8d
 /etc/exim4/conf.d/router/200_exim4-config_primary 9a81bb494ab18397b54341e6d9d66ea8
 /etc/exim4/conf.d/router/300_exim4-config_real_local 07c6277988b181918f790ffe68c245da
 /etc/exim4/conf.d/router/400_exim4-config_system_aliases 7dc0cee575163f1d9761f1cf317f8299
 /etc/exim4/conf.d/router/500_exim4-config_hubuser bbc413dcaa4a7fc3cb5c75d3591fac27
 /etc/exim4/conf.d/router/600_exim4-config_userforward a70d7456ced9cfa42b05dd460bf269d7
 /etc/exim4/conf.d/router/700_exim4-config_procmail e89eb01b13b2acf673fbbb2c2dfa5999
 /etc/exim4/conf.d/router/800_exim4-config_maildrop e38b464ff80a81c2edfd44b68e79a6ed
 /etc/exim4/conf.d/router/850_exim4-config_lowuid 52dc089e083a3f5b0bda6af1c6bc48d7
 /etc/exim4/conf.d/router/900_exim4-config_local_user 20c8ced8346125170242584e575a95ff
 /etc/exim4/conf.d/router/mmm_mail4root 8a16022dfc39cae4f508dfab20a8f760
 /etc/exim4/conf.d/transport/00_exim4-config_header 9568ac286553a79b8447c9060fed7798
 /etc/exim4/conf.d/transport/10_exim4-config_transport-macros 82bdd46b7bfecb990fb10e49415f5af3
 /etc/exim4/conf.d/transport/30_exim4-config_address_file fe97ddf4165820356e90c05fa744f796
 /etc/exim4/conf.d/transport/30_exim4-config_address_pipe dfcd9d71f1bb4c55ac29cccead29117e
 /etc/exim4/conf.d/transport/30_exim4-config_address_reply 9145131105953b0125a228ab9b7c6500
 /etc/exim4/conf.d/transport/30_exim4-config_mail_spool 1eafbf68af18442a08ef3d955b7b172f
 /etc/exim4/conf.d/transport/30_exim4-config_maildir_home 3edfd11b8e9a8919a9a14cbc24637d68
 /etc/exim4/conf.d/transport/30_exim4-config_maildrop_pipe c9f289c2504ed26493f3050190b44ad7
 /etc/exim4/conf.d/transport/30_exim4-config_procmail_pipe 82379d31ca4bf60d9667f408cb55dbbf
 /etc/exim4/conf.d/transport/30_exim4-config_remote_smtp 20cf395bd41d4282a57f552ade770531
 /etc/exim4/conf.d/transport/30_exim4-config_remote_smtp_smarthost d0b6f6f30aadc68e3cfbaefa79166516
 /etc/exim4/conf.d/transport/35_exim4-config_address_directory c2a777e8db8fac4f83c2da0c95952598
 /etc/exim4/exim4.conf.template b19bfccbb69fd6b3b0bc01243fa69c04
 /etc/exim4/passwd.client 4b0013712a87d147c8303fa761e3c771
 /etc/ppp/ip-up.d/exim4 5f4b9cb6696117b19b32aaa8fa7a6de2
Description: configuration for the Exim MTA (v4)
 Exim (v4) is a mail transport agent. exim4-config provides the configuration
 for the exim4 daemon packages. The configuration framework has been split
 off the main package to allow sites to replace the configuration scheme
 with their own without having to change the actual exim4 packages.
 .
 Sites with special configuration needs (having a lot of identically
 configured machines for example) can use this to distribute their own
 custom configuration via the packaging system, using the magic
 available with dpkg's conffile handling, without having to do local
 changes on all of these machines.
 .
 The Debian exim4 packages have their own web page,
 http://wiki.debian.org/PkgExim4. There is also a Debian-specific
 FAQ list. Information about the way the Debian packages are
 configured can be found in
 /usr/share/doc/exim4-base/README.Debian.gz, which additionally contains
 information about the way the Debian binary packages are built. The
 very extensive upstream documentation is shipped in
 /usr/share/doc/exim4-base/spec.txt.gz. To repeat the debconf-driven
 configuration process in a standard setup, invoke dpkg-reconfigure
 exim4-config. There is a Debian-centered mailing list,
 pkg-exim4-users@lists.alioth.debian.org. Please ask Debian-specific
 questions there, and only write to the upstream exim-users mailing
 list if you are sure that your question is not Debian-specific. You
 can find the subscription web page on
 http://lists.alioth.debian.org/mailman/listinfo/pkg-exim4-users
Homepage: https://www.exim.org/

Package: exim4-daemon-light
Status: install ok installed
Priority: optional
Section: mail
Installed-Size: 1495
Maintainer: Exim4 Maintainers <pkg-exim4-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: exim4
Version: 4.96-15+deb12u10
Replaces: exim4-base (<= 4.61-1), mail-transport-agent
Provides: default-mta, exim4-localscanapi-6.0, mail-transport-agent
Depends: exim4-base (>= 4.96), debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.34), libcrypt1 (>= 1:4.1.0), libdb5.3, libgnutls-dane0 (>= 3.7.0), libgnutls30 (>= 3.7.5), libidn12 (>= 1.13), libidn2-0 (>= 0.6), libnsl2 (>= 1.0), libpcre2-8-0 (>= 10.22)
Conflicts: mail-transport-agent
Description: lightweight Exim MTA (v4) daemon
 Exim (v4) is a mail transport agent. This package contains the exim4
 daemon with only basic features enabled. It works well with the
 standard setups that are provided by Debian and includes support for
 TLS encryption and the dlopen patch to allow dynamic loading of a
 local_scan function.
 .
 The Debian exim4 packages have their own web page,
 http://wiki.debian.org/PkgExim4. There is also a Debian-specific
 FAQ list. Information about the way the Debian packages are
 configured can be found in
 /usr/share/doc/exim4-base/README.Debian.gz, which additionally contains
 information about the way the Debian binary packages are built. The
 very extensive upstream documentation is shipped in
 /usr/share/doc/exim4-base/spec.txt.gz. To repeat the debconf-driven
 configuration process in a standard setup, invoke dpkg-reconfigure
 exim4-config. There is a Debian-centered mailing list,
 pkg-exim4-users@lists.alioth.debian.org. Please ask Debian-specific
 questions there, and only write to the upstream exim-users mailing
 list if you are sure that your question is not Debian-specific. You
 can find the subscription web page on
 http://lists.alioth.debian.org/mailman/listinfo/pkg-exim4-users
Homepage: https://www.exim.org/

Package: fakeroot
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 208
Maintainer: Clint Adams <clint@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.31-1.2
Depends: libfakeroot (>= 1.31-1.2), libc6 (>= 2.34)
Description: tool for simulating superuser privileges
 fakeroot provides a fake "root environment" by means of LD_PRELOAD and
 SysV IPC (or TCP) trickery. It puts wrappers around getuid(), chown(),
 stat(), and other file-manipulation functions, so that unprivileged
 users can (for instance) populate .deb archives with root-owned files;
 various build tools use fakeroot for this by default.
 .
 This package contains fakeroot command and the daemon that remembers
 fake ownership/permissions of files manipulated by fakeroot
 processes.

Package: fdisk
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 479
Maintainer: util-linux packagers <util-linux@packages.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.38.1-5+deb12u3
Depends: libc6 (>= 2.34), libfdisk1 (>= 2.38), libmount1 (>= 2.24.2), libncursesw6 (>= 6), libreadline8 (>= 6.0), libsmartcols1 (>= 2.28~rc1), libtinfo6 (>= 6)
Recommends: sensible-utils
Description: collection of partitioning utilities
 This package contains the classic fdisk, sfdisk and cfdisk partitioning
 utilities from the util-linux suite.
 .
 The utilities included in this package allow you to partition
 your hard disk. The utilities supports both modern and legacy
 partition tables (eg. GPT, MBR, etc).
 .
 The fdisk utility is the classical text-mode utility.
 The cfdisk utilitity gives a more userfriendly curses based interface.
 The sfdisk utility is mostly for automation and scripting uses.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/

Package: ffmpeg
Status: install ok installed
Priority: optional
Section: video
Installed-Size: 2388
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 7:5.1.9-0+deb12u1
Depends: libavcodec59 (>= 7:5.0), libavdevice59 (>= 7:5.0), libavfilter8 (>= 7:5.1), libavformat59 (>= 7:5.1), libavutil57 (>= 7:5.1), libc6 (>= 2.35), libpostproc56 (>= 7:5.0), libsdl2-2.0-0 (>= 2.0.12), libswresample4 (>= 7:5.1), libswscale6 (>= 7:5.0)
Suggests: ffmpeg-doc
Description: Tools for transcoding, streaming and playing of multimedia files
 FFmpeg is the leading multimedia framework, able to decode, encode, transcode,
 mux, demux, stream, filter and play pretty much anything that humans and
 machines have created. It supports the most obscure ancient formats up to the
 cutting edge.
 .
 This package contains:
  * ffmpeg: a command line tool to convert multimedia files between formats
  * ffplay: a simple media player based on SDL and the FFmpeg libraries
  * ffprobe: a simple multimedia stream analyzer
  * qt-faststart: a utility to rearrange Quicktime files
Homepage: https://ffmpeg.org/

Package: file
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 79
Maintainer: Christoph Biedl <debian.axhn@manchmal.in-ulm.de>
Architecture: amd64
Multi-Arch: foreign
Version: 1:5.44-3
Depends: libc6 (>= 2.34), libmagic1 (= 1:5.44-3)
Breaks: debhelper (<< 12.2~)
Description: Recognize the type of data in a file using "magic" numbers
 The file command is "a file type guesser", a command-line tool that
 tells you in words what kind of data a file contains.
 .
 This package contains the file program itself.
Homepage: https://www.darwinsys.com/file/

Package: findutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 1746
Maintainer: Andreas Metzler <ametzler@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 4.9.0-4
Pre-Depends: libc6 (>= 2.34), libselinux1 (>= 3.1~)
Breaks: binstats (<< 1.08-8.1), guilt (<< 0.36-0.2), libpython3.4-minimal (<< 3.4.4-2), libpython3.5-minimal (<< 3.5.1-3), lsat (<< 0.9.7.1-2.1), mc (<< 3:4.8.11-1), switchconf (<< 0.0.9-2.1)
Description: utilities for finding files--find, xargs
 GNU findutils provides utilities to find files meeting specified
 criteria and perform various actions on the files which are found.
 This package contains 'find' and 'xargs'; however, 'locate' has
 been split off into a separate package.
Homepage: https://savannah.gnu.org/projects/findutils/

Package: firewalld
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 2474
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 1.3.3-1~deb12u2
Depends: dbus, gir1.2-glib-2.0, gir1.2-nm-1.0, polkitd | policykit-1, python3-dbus, python3-gi, python3-nftables (>= 0.9.3-2~), python3-firewall (= 1.3.3-1~deb12u2), python3:any
Recommends: ipset, iptables, python3-cap-ng
Conffiles:
 /etc/firewalld/firewalld.conf a108111014b6260ee1110c231f15cd18
 /etc/firewalld/lockdown-whitelist.xml 83ac547c0b190ae17dcd16eb9d2e6f12
 /etc/logrotate.d/firewalld 1807a9d374ef509073a3b3552f8c29ea
Description: dynamically managed firewall with support for network zones
 firewalld is a dynamically managed firewall daemon with support for
 network/firewall zones to define the trust level of network connections
 or interfaces. It has support for IPv4, IPv6 firewall settings and for
 ethernet bridges and has a separation of runtime and persistent
 configuration options.
 It also provides a D-Bus interface for services or applications to add
 and apply firewall rules on-the-fly.
Homepage: https://www.firewalld.org/

Package: firmware-linux-free
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 85
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: firmware-free
Version: 20200122-1
Suggests: initramfs-tools
Description: Binary firmware for various drivers in the Linux kernel
 This package contains firmware which was previously included in the Linux
 kernel and which is compliant with the Debian Free Software Guidelines.
 .
 Most firmware previously included in the Linux kernel is non-free and has
 been moved to the firmware-linux-nonfree package.
 .
 Contents:
  * AV7110 DVB card firmware (av7110/bootcode.bin)
  * Atheros AR9170 free firmware for use with carl9170 (carl9170-1.fw)
  * 3Com Megahertz 3CCFEM556 CIS fix (cis/3CCFEM556.cis)
  * 3Com Megahertz 3CXEM556 CIS fix (cis/3CXEM556.cis)
  * Advantech COMpad-32/85 CIS fix (cis/COMpad2.cis)
  * Advantech COMpad-32/85B-4 CIS fix (cis/COMpad4.cis)
  * NSC DP83903 PCMCIA Ethernet card CIS fix (cis/DP83903.cis)
  * Allied Telesis LA-PCM CIS fix (cis/LA-PCM.cis)
  * MultiTech PCMCIA 56K DataFax CIS fix (cis/MT5634ZLX.cis)
  * NDC PCMCIA Ethernet card CIS fix (cis/NE2K.cis)
  * EN2218-LAN/MODEM CIS fix (cis/PCMLM28.cis)
  * PreMax PE-200 CIS fix (cis/PE-200.cis)
  * LanPro EP-4000A CIS fix (cis/PE520.cis)
  * RS-COM 2P CIS fix (cis/RS-COM-2P.cis)
  * Sierra Aircard 555 CIS fix (cis/SW_555_SER.cis)
  * Sierra Wireless AC710/AC750 CIS fix (cis/SW_7xx_SER.cis)
  * Sierra Wireless AC850/AC860 CIS fix (cis/SW_8xx_SER.cis)
  * Tamarack PCMCIA Ethernet card CIS fix (cis/tamarack.cis)
  * Atari Falcon DSP56001 firmware (dsp56k/bootstrap.bin)
  * Intel C600 SAS/SATA controller default parameters, version 1.3
    (isci/isci_firmware.bin)
  * Keyspan USA-19 firmware (keyspan_pda/keyspan_pda.fw)
  * Xircom PGSDB9/Entrega PortGear firmware (keyspan_pda/xircom_pgs.fw)
  * USB-DUX firmware (usbdux_firmware.bin)
  * USB-DUXfast firmware (usbduxfast_firmware.bin)
  * USB-DUXsigma firmware (usbduxsigma_firmware.bin)
Homepage: http://git.kernel.org/?p=linux/kernel/git/firmware/linux-firmware.git

Package: fontconfig
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 617
Maintainer: Debian freedesktop.org maintainers <pkg-freedesktop-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.14.1-4
Depends: libc6 (>= 2.34), libfontconfig1 (>= 2.13.0), libfreetype6 (>= 2.2.1), fontconfig-config
Description: generic font configuration library - support binaries
 Fontconfig is a font configuration and customization library, which
 does not depend on the X Window System. It is designed to locate
 fonts within the system and select them according to requirements
 specified by applications.
 .
 Fontconfig is not a rasterization library, nor does it impose a
 particular rasterization library on the application. The X-specific
 library 'Xft' uses fontconfig along with freetype to specify and
 rasterize fonts.
 .
 This package contains a program to maintain the fontconfig cache
 (fc-cache), a sample program to list installed fonts (fc-list), a program
 to test the matching rules (fc-match) and a program to dump the binary
 cache files in string form (fc-cat). It no longer makes fonts managed by defoma
 available to fontconfig applications.
Homepage: https://www.freedesktop.org/wiki/Software/fontconfig/

Package: fontconfig-config
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 527
Maintainer: Debian freedesktop.org maintainers <pkg-freedesktop-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: fontconfig
Version: 2.14.1-4
Depends: debconf (>= 0.5) | debconf-2.0, fonts-dejavu-core | ttf-bitstream-vera | fonts-liberation | fonts-liberation2 | fonts-croscore | fonts-freefont-otf | fonts-freefont-ttf | fonts-urw-base35 | fonts-texgyre
Breaks: libfontconfig1 (<< 2.13.0)
Conffiles:
 /etc/fonts/conf.d/README ad6182d0b838d9d8f39219a37b88b24d
 /etc/fonts/fonts.conf 9632eb1c8b4d81e0e300cd733a4beefe
Description: generic font configuration library - configuration
 Fontconfig is a font configuration and customization library, which
 does not depend on the X Window System. It is designed to locate
 fonts within the system and select them according to requirements
 specified by applications.
 .
 This package contains the configuration files and scripts for fontconfig.
Homepage: https://www.freedesktop.org/wiki/Software/fontconfig/

Package: fonts-dejavu
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 34
Maintainer: Debian Fonts Task Force <debian-fonts@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2.37-6
Depends: fonts-dejavu-core, fonts-dejavu-extra
Description: metapackage to pull in fonts-dejavu-core and fonts-dejavu-extra
 DejaVu provides an expanded version of the Vera font family aiming for
 quality and broader Unicode coverage while retaining the original Vera
 style. DejaVu currently works towards conformance with the Multilingual
 European Standards (MES-1 and MES-2) for Unicode coverage. The DejaVu
 fonts provide serif, sans and monospaced variants.
 .
 Use this package if you want all DejaVu variants.
 .
 DejaVu fonts are intended for use on low-resolution devices (mainly
 computer screens) but can be used in printing as well.
Homepage: https://dejavu-fonts.github.io/

Package: fonts-dejavu-core
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 2960
Maintainer: Debian Fonts Task Force <debian-fonts@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: fonts-dejavu
Version: 2.37-6
Conffiles:
 /etc/fonts/conf.avail/20-unhint-small-dejavu-lgc-sans-mono.conf 10d6f2176d76ee9b89a19a17811257f2
 /etc/fonts/conf.avail/20-unhint-small-dejavu-lgc-sans.conf 6488b24401e477e35aa71237054c8ada
 /etc/fonts/conf.avail/20-unhint-small-dejavu-lgc-serif.conf 0b01522fe76b4e5b8ab3d12383371348
 /etc/fonts/conf.avail/20-unhint-small-dejavu-sans-mono.conf 0cbf30e4580c5a8570da071ab12c5e4d
 /etc/fonts/conf.avail/20-unhint-small-dejavu-sans.conf f7df7bba810dd953dd78212900f4dcad
 /etc/fonts/conf.avail/20-unhint-small-dejavu-serif.conf e90c678d46f49bb9d6ba469b64e80c0c
 /etc/fonts/conf.avail/57-dejavu-sans-mono.conf b9a76edd2aeb35cd1095e378963e2cdd
 /etc/fonts/conf.avail/57-dejavu-sans.conf 2156c2353cfcc81f33150cf889193c28
 /etc/fonts/conf.avail/57-dejavu-serif.conf 2604487cb2eee1bdb7010ea716faf408
 /etc/fonts/conf.avail/58-dejavu-lgc-sans-mono.conf d2ee39274982cb4f831783cff742c8bc
 /etc/fonts/conf.avail/58-dejavu-lgc-sans.conf b4a8f51e45aa24fdee47b3f838cc0205
 /etc/fonts/conf.avail/58-dejavu-lgc-serif.conf 5f0b00e681b1f40b65dd336696ee0bbb
Description: Vera font family derivate with additional characters
 DejaVu provides an expanded version of the Vera font family aiming for
 quality and broader Unicode coverage while retaining the original Vera
 style. DejaVu currently works towards conformance with the Multilingual
 European Standards (MES-1 and MES-2) for Unicode coverage. The DejaVu
 fonts provide serif, sans and monospaced variants.
 .
 This package only contains the sans, sans-bold, serif, serif-bold,
 mono and mono-bold variants. For additional variants, see the
 fonts-dejavu-extra package.
 .
 DejaVu fonts are intended for use on low-resolution devices (mainly
 computer screens) but can be used in printing as well.
Homepage: https://dejavu-fonts.github.io/

Package: fonts-dejavu-extra
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 7229
Maintainer: Debian Fonts Task Force <debian-fonts@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: fonts-dejavu
Version: 2.37-6
Depends: fonts-dejavu-core
Description: Vera font family derivate with additional characters (extra variants)
 DejaVu provides an expanded version of the Vera font family aiming for
 quality and broader Unicode coverage while retaining the original Vera
 style. DejaVu currently works towards conformance with the Multilingual
 European Standards (MES-1 and MES-2) for Unicode coverage. The DejaVu
 fonts provide serif, sans and monospaced variants.
 .
 This package includes additional variants, such as oblique, italic,
 bold-oblique, bold-italic and the condensed forms.
 .
 DejaVu fonts are intended for use on low-resolution devices (mainly
 computer screens) but can be used in printing as well.
Homepage: https://dejavu-fonts.github.io/

Package: fonts-droid-fallback
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 7345
Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: fonts-android
Version: 1:6.0.1r16-1.1
Replaces: fonts-droid (<< 1:6.0.0r26-1~)
Pre-Depends: dpkg (>= 1.15.7.2)
Recommends: fonts-noto-mono
Suggests: fonts-noto
Breaks: fonts-droid (<< 1:6.0.0r26-1~)
Conffiles:
 /etc/fonts/conf.avail/65-droid-sans-fallback.conf b53978fe17be3c725aa002da2496257c
Description: handheld device font with extensive style and language support (fallback)
 This package provides DroidSans Fallback variants, Fallback and
 FallbackFull.
 .
 Each contains extensive character set coverage including
 Western Europe, Eastern/Central Europe, Baltic, Cyrillic, Greek and
 Turkish support. The Droid Sans regular font also includes support for
 Arabic, Simplified and Traditional Chinese, Hebrew, Japanese, Korean and
 Thai.
 .
 Droid was designed by Ascender's Steve Matteson and hinted to provide
 optimal quality for screen text.
Homepage: https://android.googlesource.com/platform/frameworks/base/

Package: fonts-liberation
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 2093
Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1:1.07.4-11
Description: Fonts with the same metrics as Times, Arial and Courier
 A set of serif, sans-serif and monospaced fonts from Red Hat with
 exactly the same metrics as the (non-free) Microsoft Times, Arial
 and Courier fonts, which implies those fonts can serve as a drop-in
 replacement. The font family is named Liberation.
Homepage: https://github.com/liberationfonts/liberation-1.7-fonts

Package: fonts-liberation2
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 4290
Maintainer: Debian Fonts Task Force <debian-fonts@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2.1.5-1
Description: Fonts with the same metrics as Times, Arial and Courier (v2)
 A set of serif, sans-serif and monospaced fonts from Red Hat with
 exactly the same metrics as the (non-free) Microsoft Times, Arial
 and Courier fonts, which implies those fonts can serve as a drop-in
 replacement. The font family is named Liberation.
Homepage: https://github.com/liberationfonts

Package: fonts-noto
Status: install ok installed
Priority: optional
Section: metapackages
Installed-Size: 35
Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 20201225-1
Depends: fonts-noto-core
Recommends: fonts-noto-cjk, fonts-noto-cjk-extra, fonts-noto-color-emoji, fonts-noto-extra, fonts-noto-mono, fonts-noto-ui-core, fonts-noto-ui-extra, fonts-noto-unhinted
Description: metapackage to pull in all Noto fonts
 Noto is a collection of font families,
 each visually harmonized across scripts.
 .
 Use this package if you want all Noto fonts.
 .
 The name "Noto" is short for "No Tofu",
 describing the aim of covering all living Unicode scripts
 (currently 65 are covered, at least partly.
 .
 Tofu (豆腐) is Japanese jargon
 for unicode replacement character "�" (U+FFFD)
 often displayed as replacement for unassigned or unknown characters.
Homepage: https://www.google.com/get/noto/

Package: fonts-noto-cjk
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 91003
Maintainer: Debian Fonts Team <debian-fonts@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1:20220127+repack1-1
Suggests: fonts-noto-cjk-extra
Description: "No Tofu" font families with large Unicode coverage (CJK regular and bold)
 Noto is a collection of font families, each visually harmonized across
 scripts.
 .
 This package contains Noto font families for Traditional Chinese,
 Simplified Chinese, Japanese and Korean:
 .
  * Noto Sans CJK JP
  * Noto Sans CJK KR
  * Noto Sans CJK SC
  * Noto Sans CJK TC
  * Noto Sans Mono CJK JP
  * Noto Sans Mono CJK KR
  * Noto Sans Mono CJK SC
  * Noto Sans Mono CJK TC
  * Noto Serif CJK JP
  * Noto Serif CJK KR
  * Noto Serif CJK SC
  * Noto Serif CJK TC
 .
 These fonts are derived from the font family Source Han Sans.
 .
 The name "Noto" is short for "No Tofu", describing the aim of covering
 all living Unicode scripts.
 .
 Tofu (豆腐) is Japanese jargon for unicode replacement character "�"
 (U+FFFD) often displayed as replacement for unassigned or unknown
 characters.
 .
 This package contains regular and bold fonts.
Homepage: https://github.com/googlefonts/noto-cjk

Package: fonts-noto-cjk-extra
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 214032
Maintainer: Debian Fonts Team <debian-fonts@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: fonts-noto-cjk
Version: 1:20220127+repack1-1
Replaces: fonts-noto-cjk (<< 1:1.004+repack3-2~)
Depends: fonts-noto-cjk
Breaks: fonts-noto-cjk (<< 1:1.004+repack3-2~)
Description: "No Tofu" font families with large Unicode coverage (CJK all weight)
 Noto is a collection of font families, each visually harmonized across
 scripts.
 .
 This package contains Noto font families for Traditional Chinese,
 Simplified Chinese, Japanese and Korean:
 .
  * Noto Sans CJK JP
  * Noto Sans CJK KR
  * Noto Sans CJK SC
  * Noto Sans CJK TC
  * Noto Sans Mono CJK JP
  * Noto Sans Mono CJK KR
  * Noto Sans Mono CJK SC
  * Noto Sans Mono CJK TC
  * Noto Serif CJK JP
  * Noto Serif CJK KR
  * Noto Serif CJK SC
  * Noto Serif CJK TC
 .
 These fonts are derived from the font family Source Han Sans.
 .
 The name "Noto" is short for "No Tofu", describing the aim of covering
 all living Unicode scripts.
 .
 Tofu (豆腐) is Japanese jargon for unicode replacement character "�"
 (U+FFFD) often displayed as replacement for unassigned or unknown
 characters.
 .
 This package contains all weight fonts.
Homepage: https://github.com/googlefonts/noto-cjk

Package: fonts-noto-color-emoji
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 10740
Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2.042-0+deb12u1
Description: color emoji font from Google
 Noto is a collection of font families, each visually harmonized across
 scripts.
 .
 The name "Noto" is short for "No Tofu", describing the aim of covering
 all living Unicode scripts.
 .
 Tofu (豆腐) is Japanese jargon for unicode replacement character "�"
 (U+FFFD) often displayed as replacement for unassigned or unknown
 characters.
 .
 This package contains the color emoji font used on "stock" Android devices
 such as the Google Pixel.
Homepage: https://www.google.com/get/noto/help/emoji/

Package: fonts-noto-core
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 42555
Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: fonts-noto
Version: 20201225-1
Replaces: fonts-noto (<< 2015-05-11+cjk-1~), fonts-noto-hinted (<< 20181130-2~), fonts-noto-unhinted (<< 20201027-1~)
Breaks: fonts-noto (<< 2015-05-11+cjk-1~), fonts-noto-hinted (<< 20181130-2~), fonts-noto-unhinted (<< 20201027-1~)
Conffiles:
 /etc/fonts/conf.avail/30-droid-noto.conf a34074694dce0a5ccc5844ec0a1315ea
Description: "No Tofu" font families with large Unicode coverage (core)
 Noto is a collection of font families,
 each visually harmonized across scripts.
 .
 This package contains core weights for these Noto font families:
 .
  * Noto Kufi Arabic
  * Noto Looped Lao Bold
  * Noto Looped Lao Regular
  * Noto Looped Thai Bold
  * Noto Looped Thai Regular
  * Noto Music
  * Noto Naskh Arabic
  * Noto Nastaliq Urdu
  * Noto Rashi Hebrew
  * Noto Sans
  * Noto Sans Adlam
  * Noto Sans Adlam Unjoined
  * Noto Sans AnatoHiero
  * Noto Sans Arabic
  * Noto Sans Armenian
  * Noto Sans Avestan
  * Noto Sans Balinese
  * Noto Sans Bamum
  * Noto Sans Bassa Vah
  * Noto Sans Batak
  * Noto Sans Bengali
  * Noto Sans Bhaiksuki
  * Noto Sans Brahmi
  * Noto Sans Buginese
  * Noto Sans Buhid
  * Noto Sans CanAborig
  * Noto Sans Carian
  * Noto Sans CaucAlban
  * Noto Sans Chakma
  * Noto Sans Cham
  * Noto Sans Cherokee
  * Noto Sans Coptic
  * Noto Sans Cuneiform
  * Noto Sans Cypriot
  * Noto Sans Deseret
  * Noto Sans Devanagari
  * Noto Sans Display
  * Noto Sans Duployan
  * Noto Sans EgyptHiero
  * Noto Sans Elbasan
  * Noto Sans Elymaic
  * Noto Sans Ethiopic
  * Noto Sans Georgian
  * Noto Sans Glagolitic
  * Noto Sans Gothic
  * Noto Sans Grantha
  * Noto Sans Gujarati
  * Noto Sans Gunjala Gondi
  * Noto Sans Gurmukhi
  * Noto Sans Hanifi Rohingya
  * Noto Sans Hanunoo
  * Noto Sans Hatran
  * Noto Sans Hebrew
  * Noto Sans ImpAramaic
  * Noto Sans Indic Siyaq Numbers
  * Noto Sans InsPahlavi
  * Noto Sans InsParthi
  * Noto Sans Javanese
  * Noto Sans Kaithi
  * Noto Sans Kannada
  * Noto Sans Kayah Li
  * Noto Sans Kharoshthi
  * Noto Sans Khmer
  * Noto Sans Khojki
  * Noto Sans Khudawadi
  * Noto Sans Lao
  * Noto Sans Lepcha
  * Noto Sans Limbu
  * Noto Sans Linear A
  * Noto Sans Linear B
  * Noto Sans Lisu
  * Noto Sans Lycian
  * Noto Sans Lydian
  * Noto Sans Mahajani
  * Noto Sans Malayalam
  * Noto Sans Mandaic
  * Noto Sans Manichaean
  * Noto Sans Marchen
  * Noto Sans Masaram Gondi
  * Noto Sans Math
  * Noto Sans Mayan Numerals
  * Noto Sans Medefaidrin
  * Noto Sans MeeteiMayek
  * Noto Sans Mende Kikakui
  * Noto Sans Meroitic
  * Noto Sans Miao
  * Noto Sans Modi
  * Noto Sans Mongolian
  * Noto Sans Mro
  * Noto Sans Multani
  * Noto Sans Myanmar
  * Noto Sans NKo
  * Noto Sans Nabataean
  * Noto Sans NewTaiLue
  * Noto Sans Newa
  * Noto Sans Nushu
  * Noto Sans Ogham
  * Noto Sans Ol Chiki
  * Noto Sans Old Italic
  * Noto Sans Old Permic
  * Noto Sans Old Turkic
  * Noto Sans OldHung
  * Noto Sans OldNorArab
  * Noto Sans OldPersian
  * Noto Sans OldSogdian
  * Noto Sans OldSouArab
  * Noto Sans Oriya
  * Noto Sans Osage
  * Noto Sans Osmanya
  * Noto Sans Pahawh Hmong
  * Noto Sans Palmyrene
  * Noto Sans PauCinHau
  * Noto Sans PhagsPa
  * Noto Sans Phoenician
  * Noto Sans PsaPahlavi
  * Noto Sans Rejang
  * Noto Sans Runic
  * Noto Sans Samaritan
  * Noto Sans Saurashtra
  * Noto Sans Sharada
  * Noto Sans Shavian
  * Noto Sans Siddham
  * Noto Sans SignWrit
  * Noto Sans Sinhala
  * Noto Sans Sogdian
  * Noto Sans Sora Sompeng
  * Noto Sans Soyombo
  * Noto Sans Sundanese
  * Noto Sans Syloti Nagri
  * Noto Sans Symbols
  * Noto Sans Symbols2
  * Noto Sans Syriac
  * Noto Sans Tagalog
  * Noto Sans Tagbanwa
  * Noto Sans Tai Le
  * Noto Sans Tai Tham
  * Noto Sans Tai Viet
  * Noto Sans Takri
  * Noto Sans Tamil
  * Noto Sans Tamil Supplement
  * Noto Sans Telugu
  * Noto Sans Thaana
  * Noto Sans Thai
  * Noto Sans Tifinagh
  * Noto Sans Tifinagh APT
  * Noto Sans Tifinagh Adrar
  * Noto Sans Tifinagh Agraw Imazighen
  * Noto Sans Tifinagh Ahaggar
  * Noto Sans Tifinagh Air
  * Noto Sans Tifinagh Azawagh
  * Noto Sans Tifinagh Ghat
  * Noto Sans Tifinagh Hawad
  * Noto Sans Tifinagh Rhissa Ixa
  * Noto Sans Tifinagh SIL
  * Noto Sans Tifinagh Tawellemmet
  * Noto Sans Tirhuta
  * Noto Sans Ugaritic
  * Noto Sans Vai
  * Noto Sans Wancho
  * Noto Sans WarangCiti
  * Noto Sans Yi
  * Noto Sans Zanabazar
  * Noto Serif
  * Noto Serif Ahom
  * Noto Serif Armenian
  * Noto Serif Balinese
  * Noto Serif Bengali
  * Noto Serif Devanagari
  * Noto Serif Display
  * Noto Serif Dogra
  * Noto Serif Ethiopic
  * Noto Serif Georgian
  * Noto Serif Grantha
  * Noto Serif Gujarati
  * Noto Serif Gurmukhi
  * Noto Serif Hebrew
  * Noto Serif Hmong Nyiakeng
  * Noto Serif Kannada
  * Noto Serif Khmer
  * Noto Serif Khojki
  * Noto Serif Lao
  * Noto Serif Malayalam
  * Noto Serif Myanmar
  * Noto Serif Sinhala
  * Noto Serif Tamil
  * Noto Serif Tangut
  * Noto Serif Telugu
  * Noto Serif Thai
  * Noto Serif Tibetan
  * Noto Serif Yezidi
  * Noto Traditional Nushu
  * NotoSerifTamilSlanted
 .
 The name "Noto" is short for "No Tofu",
 describing the aim of covering all living Unicode scripts
 (currently 65 are covered, at least partly.
 .
 Tofu (豆腐) is Japanese jargon
 for unicode replacement character "�" (U+FFFD)
 often displayed as replacement for unassigned or unknown characters.
Homepage: https://www.google.com/get/noto/

Package: fonts-noto-extra
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 334238
Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: fonts-noto
Version: 20201225-1
Replaces: fonts-noto-unhinted (<< 20201027-1~)
Breaks: fonts-noto-unhinted (<< 20201027-1~)
Enhances: fonts-noto-core, fonts-noto-mono
Description: "No Tofu" font families with large Unicode coverage (extra)
 Noto is a collection of font families,
 each visually harmonized across scripts.
 .
 This package contains extra weights for these Noto font families:
 .
  * Noto Kufi Arabic Black
  * Noto Kufi Arabic Extra Bold
  * Noto Kufi Arabic Extra Light
  * Noto Kufi Arabic Light
  * Noto Kufi Arabic Medium
  * Noto Kufi Arabic Semi Bold
  * Noto Kufi Arabic Thin
  * Noto Looped Lao Black
  * Noto Looped Lao Cond Blk
  * Noto Looped Lao Cond Bold
  * Noto Looped Lao Cond ExBd
  * Noto Looped Lao Cond ExLt
  * Noto Looped Lao Cond Lt
  * Noto Looped Lao Cond Med
  * Noto Looped Lao Cond SmBd
  * Noto Looped Lao Cond Thin
  * Noto Looped Lao Condensed
  * Noto Looped Lao ExCd Blk
  * Noto Looped Lao ExCd Bold
  * Noto Looped Lao ExCd ExBd
  * Noto Looped Lao ExCd ExLt
  * Noto Looped Lao ExCd Lt
  * Noto Looped Lao ExCd Med
  * Noto Looped Lao ExCd SmBd
  * Noto Looped Lao ExCd Thin
  * Noto Looped Lao ExtLight
  * Noto Looped Lao ExtraBold
  * Noto Looped Lao ExtraCond
  * Noto Looped Lao Light
  * Noto Looped Lao Medium
  * Noto Looped Lao SemiBold
  * Noto Looped Lao SemiCond
  * Noto Looped Lao SmCd Blk
  * Noto Looped Lao SmCd Bold
  * Noto Looped Lao SmCd ExBd
  * Noto Looped Lao SmCd ExtLt
  * Noto Looped Lao SmCd Lt
  * Noto Looped Lao SmCd Med
  * Noto Looped Lao SmCd SmBd
  * Noto Looped Lao SmCd Thin
  * Noto Looped Lao Thin
  * Noto Looped Thai Black
  * Noto Looped Thai Cond Blk
  * Noto Looped Thai Cond Bold
  * Noto Looped Thai Cond ExBd
  * Noto Looped Thai Cond ExLt
  * Noto Looped Thai Cond Lt
  * Noto Looped Thai Cond Med
  * Noto Looped Thai Cond SmBd
  * Noto Looped Thai Cond Thin
  * Noto Looped Thai Condensed
  * Noto Looped Thai ExCd Blk
  * Noto Looped Thai ExCd Bold
  * Noto Looped Thai ExCd ExBd
  * Noto Looped Thai ExCd ExLt
  * Noto Looped Thai ExCd Lt
  * Noto Looped Thai ExCd Med
  * Noto Looped Thai ExCd SmBd
  * Noto Looped Thai ExCd Thin
  * Noto Looped Thai ExtLight
  * Noto Looped Thai ExtraBold
  * Noto Looped Thai ExtraCond
  * Noto Looped Thai Light
  * Noto Looped Thai Medium
  * Noto Looped Thai SemiBold
  * Noto Looped Thai SemiCond
  * Noto Looped Thai SmCd Blk
  * Noto Looped Thai SmCd Bold
  * Noto Looped Thai SmCd ExBd
  * Noto Looped Thai SmCd ExLt
  * Noto Looped Thai SmCd Lt
  * Noto Looped Thai SmCd Med
  * Noto Looped Thai SmCd SmBd
  * Noto Looped Thai SmCd Thin
  * Noto Looped Thai Thin
  * Noto Naskh Arabic Medium
  * Noto Naskh Arabic Semi Bold
  * Noto Sans Arabic Blk
  * Noto Sans Arabic Cond
  * Noto Sans Arabic Cond Blk
  * Noto Sans Arabic Cond ExtBd
  * Noto Sans Arabic Cond ExtLt
  * Noto Sans Arabic Cond Light
  * Noto Sans Arabic Cond Med
  * Noto Sans Arabic Cond SemBd
  * Noto Sans Arabic Cond Thin
  * Noto Sans Arabic ExtBd
  * Noto Sans Arabic ExtCond
  * Noto Sans Arabic ExtCond Blk
  * Noto Sans Arabic ExtCond ExtBd
  * Noto Sans Arabic ExtCond ExtLt
  * Noto Sans Arabic ExtCond Light
  * Noto Sans Arabic ExtCond Med
  * Noto Sans Arabic ExtCond SemBd
  * Noto Sans Arabic ExtCond Thin
  * Noto Sans Arabic ExtLt
  * Noto Sans Arabic Light
  * Noto Sans Arabic Med
  * Noto Sans Arabic SemBd
  * Noto Sans Arabic SemCond
  * Noto Sans Arabic SemCond Blk
  * Noto Sans Arabic SemCond ExtBd
  * Noto Sans Arabic SemCond ExtLt
  * Noto Sans Arabic SemCond Light
  * Noto Sans Arabic SemCond Med
  * Noto Sans Arabic SemCond SemBd
  * Noto Sans Arabic SemCond Thin
  * Noto Sans Arabic Thin
  * Noto Sans Armenian Black
  * Noto Sans Armenian Condensed
  * Noto Sans Armenian Condensed Black
  * Noto Sans Armenian Condensed ExtraBold
  * Noto Sans Armenian Condensed ExtraLight
  * Noto Sans Armenian Condensed Light
  * Noto Sans Armenian Condensed Medium
  * Noto Sans Armenian Condensed SemiBold
  * Noto Sans Armenian Condensed Thin
  * Noto Sans Armenian ExtraBold
  * Noto Sans Armenian ExtraCondensed
  * Noto Sans Armenian ExtraCondensed Black
  * Noto Sans Armenian ExtraCondensed ExtraBold
  * Noto Sans Armenian ExtraCondensed ExtraLight
  * Noto Sans Armenian ExtraCondensed Light
  * Noto Sans Armenian ExtraCondensed Medium
  * Noto Sans Armenian ExtraCondensed SemiBold
  * Noto Sans Armenian ExtraCondensed Thin
  * Noto Sans Armenian ExtraLight
  * Noto Sans Armenian Light
  * Noto Sans Armenian Medium
  * Noto Sans Armenian SemiBold
  * Noto Sans Armenian SemiCondensed
  * Noto Sans Armenian SemiCondensed Black
  * Noto Sans Armenian SemiCondensed ExtraBold
  * Noto Sans Armenian SemiCondensed ExtraLight
  * Noto Sans Armenian SemiCondensed Light
  * Noto Sans Armenian SemiCondensed Medium
  * Noto Sans Armenian SemiCondensed SemiBold
  * Noto Sans Armenian SemiCondensed Thin
  * Noto Sans Armenian Thin
  * Noto Sans Balinese Medium
  * Noto Sans Balinese SemiBold
  * Noto Sans Bamum Medium
  * Noto Sans Bamum SemiBold
  * Noto Sans Bengali Black
  * Noto Sans Bengali Condensed
  * Noto Sans Bengali ExtraBold
  * Noto Sans Bengali ExtraCondensed
  * Noto Sans Bengali ExtraLight
  * Noto Sans Bengali Light
  * Noto Sans Bengali Medium
  * Noto Sans Bengali SemiBold
  * Noto Sans Bengali SemiCondensed
  * Noto Sans Bengali Thin
  * Noto Sans Black
  * Noto Sans CanAborig Bk
  * Noto Sans CanAborig Lt
  * Noto Sans CanAborig Md
  * Noto Sans CanAborig SmBd
  * Noto Sans CanAborig Th
  * Noto Sans CanAborig XBd
  * Noto Sans CanAborig XLt
  * Noto Sans Cham Blk
  * Noto Sans Cham ExtBd
  * Noto Sans Cham ExtLt
  * Noto Sans Cham Light
  * Noto Sans Cham Med
  * Noto Sans Cham SemBd
  * Noto Sans Cham Thin
  * Noto Sans Cherokee Blk
  * Noto Sans Cherokee ExtBd
  * Noto Sans Cherokee ExtLt
  * Noto Sans Cherokee Light
  * Noto Sans Cherokee Med
  * Noto Sans Cherokee SemBd
  * Noto Sans Cherokee Thin
  * Noto Sans Condensed
  * Noto Sans Condensed Black
  * Noto Sans Condensed ExtraBold
  * Noto Sans Condensed ExtraLight
  * Noto Sans Condensed Light
  * Noto Sans Condensed Medium
  * Noto Sans Condensed SemiBold
  * Noto Sans Condensed Thin
  * Noto Sans Devanagari Black
  * Noto Sans Devanagari Condensed
  * Noto Sans Devanagari Condensed Black
  * Noto Sans Devanagari Condensed ExtraBold
  * Noto Sans Devanagari Condensed ExtraLight
  * Noto Sans Devanagari Condensed Light
  * Noto Sans Devanagari Condensed Medium
  * Noto Sans Devanagari Condensed SemiBold
  * Noto Sans Devanagari Condensed Thin
  * Noto Sans Devanagari ExtraBold
  * Noto Sans Devanagari ExtraCondensed
  * Noto Sans Devanagari ExtraCondensed Black
  * Noto Sans Devanagari ExtraCondensed ExtraBold
  * Noto Sans Devanagari ExtraCondensed ExtraLight
  * Noto Sans Devanagari ExtraCondensed Light
  * Noto Sans Devanagari ExtraCondensed Medium
  * Noto Sans Devanagari ExtraCondensed SemiBold
  * Noto Sans Devanagari ExtraCondensed Thin
  * Noto Sans Devanagari ExtraLight
  * Noto Sans Devanagari Light
  * Noto Sans Devanagari Medium
  * Noto Sans Devanagari SemiBold
  * Noto Sans Devanagari SemiCondensed
  * Noto Sans Devanagari SemiCondensed Black
  * Noto Sans Devanagari SemiCondensed ExtraBold
  * Noto Sans Devanagari SemiCondensed ExtraLight
  * Noto Sans Devanagari SemiCondensed Light
  * Noto Sans Devanagari SemiCondensed Medium
  * Noto Sans Devanagari SemiCondensed SemiBold
  * Noto Sans Devanagari SemiCondensed Thin
  * Noto Sans Devanagari Thin
  * Noto Sans Display Black
  * Noto Sans Display Condensed
  * Noto Sans Display Condensed Black
  * Noto Sans Display Condensed ExtraBold
  * Noto Sans Display Condensed ExtraLight
  * Noto Sans Display Condensed Light
  * Noto Sans Display Condensed Medium
  * Noto Sans Display Condensed SemiBold
  * Noto Sans Display Condensed Thin
  * Noto Sans Display ExtraBold
  * Noto Sans Display ExtraCondensed
  * Noto Sans Display ExtraCondensed Black
  * Noto Sans Display ExtraCondensed ExtraBold
  * Noto Sans Display ExtraCondensed ExtraLight
  * Noto Sans Display ExtraCondensed Light
  * Noto Sans Display ExtraCondensed Medium
  * Noto Sans Display ExtraCondensed SemiBold
  * Noto Sans Display ExtraCondensed Thin
  * Noto Sans Display ExtraLight
  * Noto Sans Display Light
  * Noto Sans Display Medium
  * Noto Sans Display SemiBold
  * Noto Sans Display SemiCondensed
  * Noto Sans Display SemiCondensed Black
  * Noto Sans Display SemiCondensed ExtraBold
  * Noto Sans Display SemiCondensed ExtraLight
  * Noto Sans Display SemiCondensed Light
  * Noto Sans Display SemiCondensed Medium
  * Noto Sans Display SemiCondensed SemiBold
  * Noto Sans Display SemiCondensed Thin
  * Noto Sans Display Thin
  * Noto Sans Ethiopic Blk
  * Noto Sans Ethiopic Cond
  * Noto Sans Ethiopic Cond Blk
  * Noto Sans Ethiopic Cond ExtBd
  * Noto Sans Ethiopic Cond ExtLt
  * Noto Sans Ethiopic Cond Light
  * Noto Sans Ethiopic Cond Med
  * Noto Sans Ethiopic Cond SemBd
  * Noto Sans Ethiopic Cond Thin
  * Noto Sans Ethiopic ExtBd
  * Noto Sans Ethiopic ExtCond
  * Noto Sans Ethiopic ExtCond Blk
  * Noto Sans Ethiopic ExtCond ExtBd
  * Noto Sans Ethiopic ExtCond ExtLt
  * Noto Sans Ethiopic ExtCond Light
  * Noto Sans Ethiopic ExtCond Med
  * Noto Sans Ethiopic ExtCond SemBd
  * Noto Sans Ethiopic ExtCond Thin
  * Noto Sans Ethiopic ExtLt
  * Noto Sans Ethiopic Light
  * Noto Sans Ethiopic Med
  * Noto Sans Ethiopic SemBd
  * Noto Sans Ethiopic SemCond
  * Noto Sans Ethiopic SemCond Blk
  * Noto Sans Ethiopic SemCond ExtBd
  * Noto Sans Ethiopic SemCond ExtLt
  * Noto Sans Ethiopic SemCond Light
  * Noto Sans Ethiopic SemCond Med
  * Noto Sans Ethiopic SemCond SemBd
  * Noto Sans Ethiopic SemCond Thin
  * Noto Sans Ethiopic Thin
  * Noto Sans ExtraBold
  * Noto Sans ExtraCondensed
  * Noto Sans ExtraCondensed Black
  * Noto Sans ExtraCondensed ExtraBold
  * Noto Sans ExtraCondensed ExtraLight
  * Noto Sans ExtraCondensed Light
  * Noto Sans ExtraCondensed Medium
  * Noto Sans ExtraCondensed SemiBold
  * Noto Sans ExtraCondensed Thin
  * Noto Sans ExtraLight
  * Noto Sans Georgian Blk
  * Noto Sans Georgian Cond
  * Noto Sans Georgian Cond Blk
  * Noto Sans Georgian Cond ExtBd
  * Noto Sans Georgian Cond ExtLt
  * Noto Sans Georgian Cond Light
  * Noto Sans Georgian Cond Med
  * Noto Sans Georgian Cond SemBd
  * Noto Sans Georgian Cond Thin
  * Noto Sans Georgian ExtBd
  * Noto Sans Georgian ExtCond
  * Noto Sans Georgian ExtCond Blk
  * Noto Sans Georgian ExtCond ExtBd
  * Noto Sans Georgian ExtCond ExtLt
  * Noto Sans Georgian ExtCond Light
  * Noto Sans Georgian ExtCond Med
  * Noto Sans Georgian ExtCond SemBd
  * Noto Sans Georgian ExtCond Thin
  * Noto Sans Georgian ExtLt
  * Noto Sans Georgian Light
  * Noto Sans Georgian Med
  * Noto Sans Georgian SemBd
  * Noto Sans Georgian SemCond
  * Noto Sans Georgian SemCond Blk
  * Noto Sans Georgian SemCond ExtBd
  * Noto Sans Georgian SemCond ExtLt
  * Noto Sans Georgian SemCond Light
  * Noto Sans Georgian SemCond Med
  * Noto Sans Georgian SemCond SemBd
  * Noto Sans Georgian SemCond Thin
  * Noto Sans Georgian Thin
  * Noto Sans Gujarati Black
  * Noto Sans Gujarati Condensed
  * Noto Sans Gujarati Condensed Black
  * Noto Sans Gujarati Condensed ExtraBold
  * Noto Sans Gujarati Condensed ExtraLight
  * Noto Sans Gujarati Condensed Light
  * Noto Sans Gujarati Condensed Medium
  * Noto Sans Gujarati Condensed SemiBold
  * Noto Sans Gujarati Condensed Thin
  * Noto Sans Gujarati ExtraBold
  * Noto Sans Gujarati ExtraCondensed
  * Noto Sans Gujarati ExtraCondensed Black
  * Noto Sans Gujarati ExtraCondensed ExtraBold
  * Noto Sans Gujarati ExtraCondensed ExtraLight
  * Noto Sans Gujarati ExtraCondensed Light
  * Noto Sans Gujarati ExtraCondensed Medium
  * Noto Sans Gujarati ExtraCondensed SemiBold
  * Noto Sans Gujarati ExtraCondensed Thin
  * Noto Sans Gujarati ExtraLight
  * Noto Sans Gujarati Light
  * Noto Sans Gujarati Medium
  * Noto Sans Gujarati SemiBold
  * Noto Sans Gujarati SemiCondensed
  * Noto Sans Gujarati SemiCondensed Black
  * Noto Sans Gujarati SemiCondensed ExtraBold
  * Noto Sans Gujarati SemiCondensed ExtraLight
  * Noto Sans Gujarati SemiCondensed Light
  * Noto Sans Gujarati SemiCondensed Medium
  * Noto Sans Gujarati SemiCondensed SemiBold
  * Noto Sans Gujarati SemiCondensed Thin
  * Noto Sans Gujarati Thin
  * Noto Sans Gurmukhi Black
  * Noto Sans Gurmukhi Condensed
  * Noto Sans Gurmukhi Condensed Black
  * Noto Sans Gurmukhi Condensed ExtraBold
  * Noto Sans Gurmukhi Condensed ExtraLight
  * Noto Sans Gurmukhi Condensed Light
  * Noto Sans Gurmukhi Condensed Medium
  * Noto Sans Gurmukhi Condensed SemiBold
  * Noto Sans Gurmukhi Condensed Thin
  * Noto Sans Gurmukhi ExtraBold
  * Noto Sans Gurmukhi ExtraCondensed
  * Noto Sans Gurmukhi ExtraCondensed Black
  * Noto Sans Gurmukhi ExtraCondensed ExtraBold
  * Noto Sans Gurmukhi ExtraCondensed ExtraLight
  * Noto Sans Gurmukhi ExtraCondensed Light
  * Noto Sans Gurmukhi ExtraCondensed Medium
  * Noto Sans Gurmukhi ExtraCondensed SemiBold
  * Noto Sans Gurmukhi ExtraCondensed Thin
  * Noto Sans Gurmukhi ExtraLight
  * Noto Sans Gurmukhi Light
  * Noto Sans Gurmukhi Medium
  * Noto Sans Gurmukhi SemiBold
  * Noto Sans Gurmukhi SemiCondensed
  * Noto Sans Gurmukhi SemiCondensed Black
  * Noto Sans Gurmukhi SemiCondensed ExtraBold
  * Noto Sans Gurmukhi SemiCondensed ExtraLight
  * Noto Sans Gurmukhi SemiCondensed Light
  * Noto Sans Gurmukhi SemiCondensed Medium
  * Noto Sans Gurmukhi SemiCondensed SemiBold
  * Noto Sans Gurmukhi SemiCondensed Thin
  * Noto Sans Gurmukhi Thin
  * Noto Sans Hanifi Rohingya Medium
  * Noto Sans Hanifi Rohingya SemiBold
  * Noto Sans Hebrew Blk
  * Noto Sans Hebrew Cond
  * Noto Sans Hebrew Cond Blk
  * Noto Sans Hebrew Cond ExtBd
  * Noto Sans Hebrew Cond ExtLt
  * Noto Sans Hebrew Cond Light
  * Noto Sans Hebrew Cond Med
  * Noto Sans Hebrew Cond SemBd
  * Noto Sans Hebrew Cond Thin
  * Noto Sans Hebrew ExtBd
  * Noto Sans Hebrew ExtCond
  * Noto Sans Hebrew ExtCond Blk
  * Noto Sans Hebrew ExtCond ExtBd
  * Noto Sans Hebrew ExtCond ExtLt
  * Noto Sans Hebrew ExtCond Light
  * Noto Sans Hebrew ExtCond Med
  * Noto Sans Hebrew ExtCond SemBd
  * Noto Sans Hebrew ExtCond Thin
  * Noto Sans Hebrew ExtLt
  * Noto Sans Hebrew Light
  * Noto Sans Hebrew Med
  * Noto Sans Hebrew SemBd
  * Noto Sans Hebrew SemCond
  * Noto Sans Hebrew SemCond Blk
  * Noto Sans Hebrew SemCond ExtBd
  * Noto Sans Hebrew SemCond ExtLt
  * Noto Sans Hebrew SemCond Light
  * Noto Sans Hebrew SemCond Med
  * Noto Sans Hebrew SemCond SemBd
  * Noto Sans Hebrew SemCond Thin
  * Noto Sans Hebrew Thin
  * Noto Sans Kannada Black
  * Noto Sans Kannada Condensed
  * Noto Sans Kannada Condensed Black
  * Noto Sans Kannada Condensed ExtraBold
  * Noto Sans Kannada Condensed ExtraLight
  * Noto Sans Kannada Condensed Light
  * Noto Sans Kannada Condensed Medium
  * Noto Sans Kannada Condensed SemiBold
  * Noto Sans Kannada Condensed Thin
  * Noto Sans Kannada ExtraBold
  * Noto Sans Kannada ExtraCondensed
  * Noto Sans Kannada ExtraCondensed Black
  * Noto Sans Kannada ExtraCondensed ExtraBold
  * Noto Sans Kannada ExtraCondensed ExtraLight
  * Noto Sans Kannada ExtraCondensed Light
  * Noto Sans Kannada ExtraCondensed Medium
  * Noto Sans Kannada ExtraCondensed SemiBold
  * Noto Sans Kannada ExtraCondensed Thin
  * Noto Sans Kannada ExtraLight
  * Noto Sans Kannada Light
  * Noto Sans Kannada Medium
  * Noto Sans Kannada SemiBold
  * Noto Sans Kannada SemiCondensed
  * Noto Sans Kannada SemiCondensed Black
  * Noto Sans Kannada SemiCondensed ExtraBold
  * Noto Sans Kannada SemiCondensed ExtraLight
  * Noto Sans Kannada SemiCondensed Light
  * Noto Sans Kannada SemiCondensed Medium
  * Noto Sans Kannada SemiCondensed SemiBold
  * Noto Sans Kannada SemiCondensed Thin
  * Noto Sans Kannada Thin
  * Noto Sans Kayah Li Medium
  * Noto Sans Kayah Li SemiBold
  * Noto Sans Khmer Black
  * Noto Sans Khmer Condensed
  * Noto Sans Khmer Condensed Black
  * Noto Sans Khmer Condensed ExtraBold
  * Noto Sans Khmer Condensed ExtraLight
  * Noto Sans Khmer Condensed Light
  * Noto Sans Khmer Condensed Medium
  * Noto Sans Khmer Condensed SemiBold
  * Noto Sans Khmer Condensed Thin
  * Noto Sans Khmer ExtraBold
  * Noto Sans Khmer ExtraCondensed
  * Noto Sans Khmer ExtraCondensed Black
  * Noto Sans Khmer ExtraCondensed ExtraBold
  * Noto Sans Khmer ExtraCondensed ExtraLight
  * Noto Sans Khmer ExtraCondensed Light
  * Noto Sans Khmer ExtraCondensed Medium
  * Noto Sans Khmer ExtraCondensed SemiBold
  * Noto Sans Khmer ExtraCondensed Thin
  * Noto Sans Khmer ExtraLight
  * Noto Sans Khmer Light
  * Noto Sans Khmer Medium
  * Noto Sans Khmer SemiBold
  * Noto Sans Khmer SemiCondensed
  * Noto Sans Khmer SemiCondensed Black
  * Noto Sans Khmer SemiCondensed ExtraBold
  * Noto Sans Khmer SemiCondensed ExtraLight
  * Noto Sans Khmer SemiCondensed Light
  * Noto Sans Khmer SemiCondensed Medium
  * Noto Sans Khmer SemiCondensed SemiBold
  * Noto Sans Khmer SemiCondensed Thin
  * Noto Sans Khmer Thin
  * Noto Sans Lao Blk
  * Noto Sans Lao Cond
  * Noto Sans Lao Cond Blk
  * Noto Sans Lao Cond ExtBd
  * Noto Sans Lao Cond ExtLt
  * Noto Sans Lao Cond Light
  * Noto Sans Lao Cond Med
  * Noto Sans Lao Cond SemBd
  * Noto Sans Lao Cond Thin
  * Noto Sans Lao ExtBd
  * Noto Sans Lao ExtCond
  * Noto Sans Lao ExtCond Blk
  * Noto Sans Lao ExtCond ExtBd
  * Noto Sans Lao ExtCond ExtLt
  * Noto Sans Lao ExtCond Light
  * Noto Sans Lao ExtCond Med
  * Noto Sans Lao ExtCond SemBd
  * Noto Sans Lao ExtCond Thin
  * Noto Sans Lao ExtLt
  * Noto Sans Lao Light
  * Noto Sans Lao Med
  * Noto Sans Lao SemBd
  * Noto Sans Lao SemCond
  * Noto Sans Lao SemCond Blk
  * Noto Sans Lao SemCond ExtBd
  * Noto Sans Lao SemCond ExtLt
  * Noto Sans Lao SemCond Light
  * Noto Sans Lao SemCond Med
  * Noto Sans Lao SemCond SemBd
  * Noto Sans Lao SemCond Thin
  * Noto Sans Lao Thin
  * Noto Sans Light
  * Noto Sans Lisu Medium
  * Noto Sans Lisu Semi Bold
  * Noto Sans Malayalam Black
  * Noto Sans Malayalam Condensed
  * Noto Sans Malayalam Condensed Black
  * Noto Sans Malayalam Condensed ExtraBold
  * Noto Sans Malayalam Condensed ExtraLight
  * Noto Sans Malayalam Condensed Light
  * Noto Sans Malayalam Condensed Medium
  * Noto Sans Malayalam Condensed SemiBold
  * Noto Sans Malayalam Condensed Thin
  * Noto Sans Malayalam ExtraBold
  * Noto Sans Malayalam ExtraCondensed
  * Noto Sans Malayalam ExtraCondensed Black
  * Noto Sans Malayalam ExtraCondensed ExtraBold
  * Noto Sans Malayalam ExtraCondensed ExtraLight
  * Noto Sans Malayalam ExtraCondensed Light
  * Noto Sans Malayalam ExtraCondensed Medium
  * Noto Sans Malayalam ExtraCondensed SemiBold
  * Noto Sans Malayalam ExtraCondensed Thin
  * Noto Sans Malayalam ExtraLight
  * Noto Sans Malayalam Light
  * Noto Sans Malayalam Medium
  * Noto Sans Malayalam SemiBold
  * Noto Sans Malayalam SemiCondensed
  * Noto Sans Malayalam SemiCondensed Black
  * Noto Sans Malayalam SemiCondensed ExtraBold
  * Noto Sans Malayalam SemiCondensed ExtraLight
  * Noto Sans Malayalam SemiCondensed Light
  * Noto Sans Malayalam SemiCondensed Medium
  * Noto Sans Malayalam SemiCondensed SemiBold
  * Noto Sans Malayalam SemiCondensed Thin
  * Noto Sans Malayalam Thin
  * Noto Sans Medefaidrin Medium
  * Noto Sans Medefaidrin SemiBold
  * Noto Sans Medium
  * Noto Sans MeeteiMayek Black
  * Noto Sans MeeteiMayek ExtraBold
  * Noto Sans MeeteiMayek ExtraLight
  * Noto Sans MeeteiMayek Light
  * Noto Sans MeeteiMayek Medium
  * Noto Sans MeeteiMayek SemiBold
  * Noto Sans MeeteiMayek Thin
  * Noto Sans Mono Black
  * Noto Sans Mono Condensed
  * Noto Sans Mono Condensed Black
  * Noto Sans Mono Condensed ExtraBold
  * Noto Sans Mono Condensed ExtraLight
  * Noto Sans Mono Condensed Light
  * Noto Sans Mono Condensed Medium
  * Noto Sans Mono Condensed SemiBold
  * Noto Sans Mono Condensed Thin
  * Noto Sans Mono ExtraBold
  * Noto Sans Mono ExtraCondensed
  * Noto Sans Mono ExtraCondensed Black
  * Noto Sans Mono ExtraCondensed ExtraBold
  * Noto Sans Mono ExtraCondensed ExtraLight
  * Noto Sans Mono ExtraCondensed Light
  * Noto Sans Mono ExtraCondensed Medium
  * Noto Sans Mono ExtraCondensed SemiBold
  * Noto Sans Mono ExtraCondensed Thin
  * Noto Sans Mono ExtraLight
  * Noto Sans Mono Light
  * Noto Sans Mono Medium
  * Noto Sans Mono SemiBold
  * Noto Sans Mono SemiCondensed
  * Noto Sans Mono SemiCondensed Black
  * Noto Sans Mono SemiCondensed ExtraBold
  * Noto Sans Mono SemiCondensed ExtraLight
  * Noto Sans Mono SemiCondensed Light
  * Noto Sans Mono SemiCondensed Medium
  * Noto Sans Mono SemiCondensed SemiBold
  * Noto Sans Mono SemiCondensed Thin
  * Noto Sans Mono Thin
  * Noto Sans Myanmar Blk
  * Noto Sans Myanmar Cond
  * Noto Sans Myanmar Cond Blk
  * Noto Sans Myanmar Cond ExtBd
  * Noto Sans Myanmar Cond ExtLt
  * Noto Sans Myanmar Cond Light
  * Noto Sans Myanmar Cond Med
  * Noto Sans Myanmar Cond SemBd
  * Noto Sans Myanmar Cond Thin
  * Noto Sans Myanmar ExtBd
  * Noto Sans Myanmar ExtCond
  * Noto Sans Myanmar ExtCond Blk
  * Noto Sans Myanmar ExtCond ExtBd
  * Noto Sans Myanmar ExtCond ExtLt
  * Noto Sans Myanmar ExtCond Light
  * Noto Sans Myanmar ExtCond Med
  * Noto Sans Myanmar ExtCond SemBd
  * Noto Sans Myanmar ExtCond Thin
  * Noto Sans Myanmar ExtLt
  * Noto Sans Myanmar Light
  * Noto Sans Myanmar Med
  * Noto Sans Myanmar SemBd
  * Noto Sans Myanmar SemCond
  * Noto Sans Myanmar SemCond Blk
  * Noto Sans Myanmar SemCond ExtBd
  * Noto Sans Myanmar SemCond ExtLt
  * Noto Sans Myanmar SemCond Light
  * Noto Sans Myanmar SemCond Med
  * Noto Sans Myanmar SemCond SemBd
  * Noto Sans Myanmar SemCond Thin
  * Noto Sans Myanmar Thin
  * Noto Sans Ol Chiki Medium
  * Noto Sans Ol Chiki SemiBold
  * Noto Sans Oriya Blk
  * Noto Sans Oriya Cond
  * Noto Sans Oriya Cond Blk
  * Noto Sans Oriya Cond Bold
  * Noto Sans Oriya Cond Thin
  * Noto Sans Oriya ExtCond
  * Noto Sans Oriya ExtCond Blk
  * Noto Sans Oriya ExtCond Bold
  * Noto Sans Oriya ExtCond Thin
  * Noto Sans Oriya Thin
  * Noto Sans SemiBold
  * Noto Sans SemiCondensed
  * Noto Sans SemiCondensed Black
  * Noto Sans SemiCondensed ExtraBold
  * Noto Sans SemiCondensed ExtraLight
  * Noto Sans SemiCondensed Light
  * Noto Sans SemiCondensed Medium
  * Noto Sans SemiCondensed SemiBold
  * Noto Sans SemiCondensed Thin
  * Noto Sans Sinhala Black
  * Noto Sans Sinhala Condensed
  * Noto Sans Sinhala Condensed Black
  * Noto Sans Sinhala Condensed ExtraBold
  * Noto Sans Sinhala Condensed ExtraLight
  * Noto Sans Sinhala Condensed Light
  * Noto Sans Sinhala Condensed Medium
  * Noto Sans Sinhala Condensed SemiBold
  * Noto Sans Sinhala Condensed Thin
  * Noto Sans Sinhala ExtraBold
  * Noto Sans Sinhala ExtraCondensed
  * Noto Sans Sinhala ExtraCondensed Black
  * Noto Sans Sinhala ExtraCondensed ExtraBold
  * Noto Sans Sinhala ExtraCondensed ExtraLight
  * Noto Sans Sinhala ExtraCondensed Light
  * Noto Sans Sinhala ExtraCondensed Medium
  * Noto Sans Sinhala ExtraCondensed SemiBold
  * Noto Sans Sinhala ExtraCondensed Thin
  * Noto Sans Sinhala ExtraLight
  * Noto Sans Sinhala Light
  * Noto Sans Sinhala Medium
  * Noto Sans Sinhala SemiBold
  * Noto Sans Sinhala SemiCondensed
  * Noto Sans Sinhala SemiCondensed Black
  * Noto Sans Sinhala SemiCondensed ExtraBold
  * Noto Sans Sinhala SemiCondensed ExtraLight
  * Noto Sans Sinhala SemiCondensed Light
  * Noto Sans Sinhala SemiCondensed Medium
  * Noto Sans Sinhala SemiCondensed SemiBold
  * Noto Sans Sinhala SemiCondensed Thin
  * Noto Sans Sinhala Thin
  * Noto Sans Sora Sompeng Medium
  * Noto Sans Sora Sompeng Semi Bold
  * Noto Sans Sundanese
  * Noto Sans Symbols Black
  * Noto Sans Symbols ExtraBold
  * Noto Sans Symbols ExtraLight
  * Noto Sans Symbols Light
  * Noto Sans Symbols Medium
  * Noto Sans Symbols SemiBold
  * Noto Sans Symbols Thin
  * Noto Sans Syriac Black
  * Noto Sans Syriac Thin
  * Noto Sans Tai Tham Medium
  * Noto Sans Tai Tham SemiBold
  * Noto Sans Tamil Black
  * Noto Sans Tamil Condensed
  * Noto Sans Tamil Condensed Black
  * Noto Sans Tamil Condensed ExtraBold
  * Noto Sans Tamil Condensed ExtraLight
  * Noto Sans Tamil Condensed Light
  * Noto Sans Tamil Condensed Medium
  * Noto Sans Tamil Condensed SemiBold
  * Noto Sans Tamil Condensed Thin
  * Noto Sans Tamil ExtraBold
  * Noto Sans Tamil ExtraCondensed
  * Noto Sans Tamil ExtraCondensed Black
  * Noto Sans Tamil ExtraCondensed ExtraBold
  * Noto Sans Tamil ExtraCondensed ExtraLight
  * Noto Sans Tamil ExtraCondensed Light
  * Noto Sans Tamil ExtraCondensed Medium
  * Noto Sans Tamil ExtraCondensed SemiBold
  * Noto Sans Tamil ExtraCondensed Thin
  * Noto Sans Tamil ExtraLight
  * Noto Sans Tamil Light
  * Noto Sans Tamil Medium
  * Noto Sans Tamil SemiBold
  * Noto Sans Tamil SemiCondensed
  * Noto Sans Tamil SemiCondensed Black
  * Noto Sans Tamil SemiCondensed ExtraBold
  * Noto Sans Tamil SemiCondensed ExtraLight
  * Noto Sans Tamil SemiCondensed Light
  * Noto Sans Tamil SemiCondensed Medium
  * Noto Sans Tamil SemiCondensed SemiBold
  * Noto Sans Tamil SemiCondensed Thin
  * Noto Sans Tamil Thin
  * Noto Sans Telugu Black
  * Noto Sans Telugu Condensed
  * Noto Sans Telugu Condensed Black
  * Noto Sans Telugu Condensed ExtraBold
  * Noto Sans Telugu Condensed ExtraLight
  * Noto Sans Telugu Condensed Light
  * Noto Sans Telugu Condensed Medium
  * Noto Sans Telugu Condensed SemiBold
  * Noto Sans Telugu Condensed Thin
  * Noto Sans Telugu ExtraBold
  * Noto Sans Telugu ExtraCondensed
  * Noto Sans Telugu ExtraCondensed Black
  * Noto Sans Telugu ExtraCondensed ExtraBold
  * Noto Sans Telugu ExtraCondensed ExtraLight
  * Noto Sans Telugu ExtraCondensed Light
  * Noto Sans Telugu ExtraCondensed Medium
  * Noto Sans Telugu ExtraCondensed SemiBold
  * Noto Sans Telugu ExtraCondensed Thin
  * Noto Sans Telugu ExtraLight
  * Noto Sans Telugu Light
  * Noto Sans Telugu Medium
  * Noto Sans Telugu SemiBold
  * Noto Sans Telugu SemiCondensed
  * Noto Sans Telugu SemiCondensed Black
  * Noto Sans Telugu SemiCondensed ExtraBold
  * Noto Sans Telugu SemiCondensed ExtraLight
  * Noto Sans Telugu SemiCondensed Light
  * Noto Sans Telugu SemiCondensed Medium
  * Noto Sans Telugu SemiCondensed SemiBold
  * Noto Sans Telugu SemiCondensed Thin
  * Noto Sans Telugu Thin
  * Noto Sans Thaana Black
  * Noto Sans Thaana ExtraBold
  * Noto Sans Thaana ExtraLight
  * Noto Sans Thaana Light
  * Noto Sans Thaana Medium
  * Noto Sans Thaana SemiBold
  * Noto Sans Thaana Thin
  * Noto Sans Thai Blk
  * Noto Sans Thai Cond
  * Noto Sans Thai Cond Blk
  * Noto Sans Thai Cond ExtBd
  * Noto Sans Thai Cond ExtLt
  * Noto Sans Thai Cond Light
  * Noto Sans Thai Cond Med
  * Noto Sans Thai Cond SemBd
  * Noto Sans Thai Cond Thin
  * Noto Sans Thai ExtBd
  * Noto Sans Thai ExtCond
  * Noto Sans Thai ExtCond Blk
  * Noto Sans Thai ExtCond ExtBd
  * Noto Sans Thai ExtCond ExtLt
  * Noto Sans Thai ExtCond Light
  * Noto Sans Thai ExtCond Med
  * Noto Sans Thai ExtCond SemBd
  * Noto Sans Thai ExtCond Thin
  * Noto Sans Thai ExtLt
  * Noto Sans Thai Light
  * Noto Sans Thai Med
  * Noto Sans Thai SemBd
  * Noto Sans Thai SemCond
  * Noto Sans Thai SemCond Blk
  * Noto Sans Thai SemCond ExtBd
  * Noto Sans Thai SemCond ExtLt
  * Noto Sans Thai SemCond Light
  * Noto Sans Thai SemCond Med
  * Noto Sans Thai SemCond SemBd
  * Noto Sans Thai SemCond Thin
  * Noto Sans Thai Thin
  * Noto Sans Thin
  * Noto Serif Armenian Black
  * Noto Serif Armenian Condensed
  * Noto Serif Armenian Condensed Black
  * Noto Serif Armenian Condensed ExtraBold
  * Noto Serif Armenian Condensed ExtraLight
  * Noto Serif Armenian Condensed Light
  * Noto Serif Armenian Condensed Medium
  * Noto Serif Armenian Condensed SemiBold
  * Noto Serif Armenian Condensed Thin
  * Noto Serif Armenian ExtraBold
  * Noto Serif Armenian ExtraCondensed
  * Noto Serif Armenian ExtraCondensed Black
  * Noto Serif Armenian ExtraCondensed ExtraBold
  * Noto Serif Armenian ExtraCondensed ExtraLight
  * Noto Serif Armenian ExtraCondensed Light
  * Noto Serif Armenian ExtraCondensed Medium
  * Noto Serif Armenian ExtraCondensed SemiBold
  * Noto Serif Armenian ExtraCondensed Thin
  * Noto Serif Armenian ExtraLight
  * Noto Serif Armenian Light
  * Noto Serif Armenian Medium
  * Noto Serif Armenian SemiBold
  * Noto Serif Armenian SemiCondensed
  * Noto Serif Armenian SemiCondensed Black
  * Noto Serif Armenian SemiCondensed ExtraBold
  * Noto Serif Armenian SemiCondensed ExtraLight
  * Noto Serif Armenian SemiCondensed Light
  * Noto Serif Armenian SemiCondensed Medium
  * Noto Serif Armenian SemiCondensed SemiBold
  * Noto Serif Armenian SemiCondensed Thin
  * Noto Serif Armenian Thin
  * Noto Serif Bengali Black
  * Noto Serif Bengali Condensed
  * Noto Serif Bengali Condensed Black
  * Noto Serif Bengali Condensed ExtraBold
  * Noto Serif Bengali Condensed ExtraLight
  * Noto Serif Bengali Condensed Light
  * Noto Serif Bengali Condensed Medium
  * Noto Serif Bengali Condensed SemiBold
  * Noto Serif Bengali Condensed Thin
  * Noto Serif Bengali ExtraBold
  * Noto Serif Bengali ExtraCondensed
  * Noto Serif Bengali ExtraCondensed Black
  * Noto Serif Bengali ExtraCondensed ExtraBold
  * Noto Serif Bengali ExtraCondensed ExtraLight
  * Noto Serif Bengali ExtraCondensed Light
  * Noto Serif Bengali ExtraCondensed Medium
  * Noto Serif Bengali ExtraCondensed SemiBold
  * Noto Serif Bengali ExtraCondensed Thin
  * Noto Serif Bengali ExtraLight
  * Noto Serif Bengali Light
  * Noto Serif Bengali Medium
  * Noto Serif Bengali SemiBold
  * Noto Serif Bengali SemiCondensed
  * Noto Serif Bengali SemiCondensed Black
  * Noto Serif Bengali SemiCondensed ExtraBold
  * Noto Serif Bengali SemiCondensed ExtraLight
  * Noto Serif Bengali SemiCondensed Light
  * Noto Serif Bengali SemiCondensed Medium
  * Noto Serif Bengali SemiCondensed SemiBold
  * Noto Serif Bengali SemiCondensed Thin
  * Noto Serif Bengali Thin
  * Noto Serif Black
  * Noto Serif Condensed
  * Noto Serif Condensed Black
  * Noto Serif Condensed ExtraBold
  * Noto Serif Condensed ExtraLight
  * Noto Serif Condensed Light
  * Noto Serif Condensed Medium
  * Noto Serif Condensed SemiBold
  * Noto Serif Condensed Thin
  * Noto Serif Devanagari Black
  * Noto Serif Devanagari Condensed
  * Noto Serif Devanagari Condensed Black
  * Noto Serif Devanagari Condensed ExtraBold
  * Noto Serif Devanagari Condensed ExtraLight
  * Noto Serif Devanagari Condensed Light
  * Noto Serif Devanagari Condensed Medium
  * Noto Serif Devanagari Condensed SemiBold
  * Noto Serif Devanagari Condensed Thin
  * Noto Serif Devanagari ExtraBold
  * Noto Serif Devanagari ExtraCondensed
  * Noto Serif Devanagari ExtraCondensed Black
  * Noto Serif Devanagari ExtraCondensed ExtraBold
  * Noto Serif Devanagari ExtraCondensed ExtraLight
  * Noto Serif Devanagari ExtraCondensed Light
  * Noto Serif Devanagari ExtraCondensed Medium
  * Noto Serif Devanagari ExtraCondensed SemiBold
  * Noto Serif Devanagari ExtraCondensed Thin
  * Noto Serif Devanagari ExtraLight
  * Noto Serif Devanagari Light
  * Noto Serif Devanagari Medium
  * Noto Serif Devanagari SemiBold
  * Noto Serif Devanagari SemiCondensed
  * Noto Serif Devanagari SemiCondensed Black
  * Noto Serif Devanagari SemiCondensed ExtraBold
  * Noto Serif Devanagari SemiCondensed ExtraLight
  * Noto Serif Devanagari SemiCondensed Light
  * Noto Serif Devanagari SemiCondensed Medium
  * Noto Serif Devanagari SemiCondensed SemiBold
  * Noto Serif Devanagari SemiCondensed Thin
  * Noto Serif Devanagari Thin
  * Noto Serif Display Black
  * Noto Serif Display Condensed
  * Noto Serif Display Condensed Black
  * Noto Serif Display Condensed ExtraBold
  * Noto Serif Display Condensed ExtraLight
  * Noto Serif Display Condensed Light
  * Noto Serif Display Condensed Medium
  * Noto Serif Display Condensed SemiBold
  * Noto Serif Display Condensed Thin
  * Noto Serif Display ExtraBold
  * Noto Serif Display ExtraCondensed
  * Noto Serif Display ExtraCondensed Black
  * Noto Serif Display ExtraCondensed ExtraBold
  * Noto Serif Display ExtraCondensed ExtraLight
  * Noto Serif Display ExtraCondensed Light
  * Noto Serif Display ExtraCondensed Medium
  * Noto Serif Display ExtraCondensed SemiBold
  * Noto Serif Display ExtraCondensed Thin
  * Noto Serif Display ExtraLight
  * Noto Serif Display Light
  * Noto Serif Display Medium
  * Noto Serif Display SemiBold
  * Noto Serif Display SemiCondensed
  * Noto Serif Display SemiCondensed Black
  * Noto Serif Display SemiCondensed ExtraBold
  * Noto Serif Display SemiCondensed ExtraLight
  * Noto Serif Display SemiCondensed Light
  * Noto Serif Display SemiCondensed Medium
  * Noto Serif Display SemiCondensed SemiBold
  * Noto Serif Display SemiCondensed Thin
  * Noto Serif Display Thin
  * Noto Serif Ethiopic Bk
  * Noto Serif Ethiopic Cn
  * Noto Serif Ethiopic Cn Bk
  * Noto Serif Ethiopic Cn Lt
  * Noto Serif Ethiopic Cn Md
  * Noto Serif Ethiopic Cn SmBd
  * Noto Serif Ethiopic Cn Th
  * Noto Serif Ethiopic Cn XBd
  * Noto Serif Ethiopic Cn XLt
  * Noto Serif Ethiopic Lt
  * Noto Serif Ethiopic Md
  * Noto Serif Ethiopic SmBd
  * Noto Serif Ethiopic SmCn
  * Noto Serif Ethiopic SmCn Bk
  * Noto Serif Ethiopic SmCn Lt
  * Noto Serif Ethiopic SmCn Md
  * Noto Serif Ethiopic SmCn SmBd
  * Noto Serif Ethiopic SmCn Th
  * Noto Serif Ethiopic SmCn XBd
  * Noto Serif Ethiopic SmCn XLt
  * Noto Serif Ethiopic Th
  * Noto Serif Ethiopic XBd
  * Noto Serif Ethiopic XCn
  * Noto Serif Ethiopic XCn Bk
  * Noto Serif Ethiopic XCn Lt
  * Noto Serif Ethiopic XCn Md
  * Noto Serif Ethiopic XCn SmBd
  * Noto Serif Ethiopic XCn Th
  * Noto Serif Ethiopic XCn XBd
  * Noto Serif Ethiopic XCn XLt
  * Noto Serif Ethiopic XLt
  * Noto Serif ExtraBold
  * Noto Serif ExtraCondensed
  * Noto Serif ExtraCondensed Black
  * Noto Serif ExtraCondensed ExtraBold
  * Noto Serif ExtraCondensed ExtraLight
  * Noto Serif ExtraCondensed Light
  * Noto Serif ExtraCondensed Medium
  * Noto Serif ExtraCondensed SemiBold
  * Noto Serif ExtraCondensed Thin
  * Noto Serif ExtraLight
  * Noto Serif Georgian Bk
  * Noto Serif Georgian Cn
  * Noto Serif Georgian Cn Bk
  * Noto Serif Georgian Cn Lt
  * Noto Serif Georgian Cn Md
  * Noto Serif Georgian Cn SmBd
  * Noto Serif Georgian Cn Th
  * Noto Serif Georgian Cn XBd
  * Noto Serif Georgian Cn XLt
  * Noto Serif Georgian Lt
  * Noto Serif Georgian Md
  * Noto Serif Georgian SmBd
  * Noto Serif Georgian SmCn
  * Noto Serif Georgian SmCn Bk
  * Noto Serif Georgian SmCn Lt
  * Noto Serif Georgian SmCn Md
  * Noto Serif Georgian SmCn SmBd
  * Noto Serif Georgian SmCn Th
  * Noto Serif Georgian SmCn XBd
  * Noto Serif Georgian SmCn XLt
  * Noto Serif Georgian Th
  * Noto Serif Georgian XBd
  * Noto Serif Georgian XCn
  * Noto Serif Georgian XCn Bk
  * Noto Serif Georgian XCn Lt
  * Noto Serif Georgian XCn Md
  * Noto Serif Georgian XCn SmBd
  * Noto Serif Georgian XCn Th
  * Noto Serif Georgian XCn XBd
  * Noto Serif Georgian XCn XLt
  * Noto Serif Georgian XLt
  * Noto Serif Gujarati Black
  * Noto Serif Gujarati ExtraBold
  * Noto Serif Gujarati ExtraLight
  * Noto Serif Gujarati Light
  * Noto Serif Gujarati Medium
  * Noto Serif Gujarati SemiBold
  * Noto Serif Gujarati Thin
  * Noto Serif Gurmukhi Black
  * Noto Serif Gurmukhi ExtraBold
  * Noto Serif Gurmukhi ExtraLight
  * Noto Serif Gurmukhi Light
  * Noto Serif Gurmukhi Medium
  * Noto Serif Gurmukhi SemiBold
  * Noto Serif Gurmukhi Thin
  * Noto Serif Hebrew Blk
  * Noto Serif Hebrew Cond
  * Noto Serif Hebrew Cond Blk
  * Noto Serif Hebrew Cond ExtBd
  * Noto Serif Hebrew Cond ExtLt
  * Noto Serif Hebrew Cond Light
  * Noto Serif Hebrew Cond Med
  * Noto Serif Hebrew Cond SemBd
  * Noto Serif Hebrew Cond Thin
  * Noto Serif Hebrew ExtBd
  * Noto Serif Hebrew ExtCond
  * Noto Serif Hebrew ExtCond Blk
  * Noto Serif Hebrew ExtCond ExtBd
  * Noto Serif Hebrew ExtCond ExtLt
  * Noto Serif Hebrew ExtCond Light
  * Noto Serif Hebrew ExtCond Med
  * Noto Serif Hebrew ExtCond SemBd
  * Noto Serif Hebrew ExtCond Thin
  * Noto Serif Hebrew ExtLt
  * Noto Serif Hebrew Light
  * Noto Serif Hebrew Med
  * Noto Serif Hebrew SemBd
  * Noto Serif Hebrew SemCond
  * Noto Serif Hebrew SemCond Blk
  * Noto Serif Hebrew SemCond ExtBd
  * Noto Serif Hebrew SemCond ExtLt
  * Noto Serif Hebrew SemCond Light
  * Noto Serif Hebrew SemCond Med
  * Noto Serif Hebrew SemCond SemBd
  * Noto Serif Hebrew SemCond Thin
  * Noto Serif Hebrew Thin
  * Noto Serif Hmong Nyiakeng Medium
  * Noto Serif Hmong Nyiakeng SemiBold
  * Noto Serif Kannada Black
  * Noto Serif Kannada ExtraBold
  * Noto Serif Kannada ExtraLight
  * Noto Serif Kannada Light
  * Noto Serif Kannada Medium
  * Noto Serif Kannada SemiBold
  * Noto Serif Kannada Thin
  * Noto Serif Khmer Black
  * Noto Serif Khmer Condensed
  * Noto Serif Khmer Condensed Black
  * Noto Serif Khmer Condensed ExtraBold
  * Noto Serif Khmer Condensed ExtraLight
  * Noto Serif Khmer Condensed Light
  * Noto Serif Khmer Condensed Medium
  * Noto Serif Khmer Condensed SemiBold
  * Noto Serif Khmer Condensed Thin
  * Noto Serif Khmer ExtraBold
  * Noto Serif Khmer ExtraCondensed
  * Noto Serif Khmer ExtraCondensed Black
  * Noto Serif Khmer ExtraCondensed ExtraBold
  * Noto Serif Khmer ExtraCondensed ExtraLight
  * Noto Serif Khmer ExtraCondensed Light
  * Noto Serif Khmer ExtraCondensed Medium
  * Noto Serif Khmer ExtraCondensed SemiBold
  * Noto Serif Khmer ExtraCondensed Thin
  * Noto Serif Khmer ExtraLight
  * Noto Serif Khmer Light
  * Noto Serif Khmer Medium
  * Noto Serif Khmer SemiBold
  * Noto Serif Khmer SemiCondensed
  * Noto Serif Khmer SemiCondensed Black
  * Noto Serif Khmer SemiCondensed ExtraBold
  * Noto Serif Khmer SemiCondensed ExtraLight
  * Noto Serif Khmer SemiCondensed Light
  * Noto Serif Khmer SemiCondensed Medium
  * Noto Serif Khmer SemiCondensed SemiBold
  * Noto Serif Khmer SemiCondensed Thin
  * Noto Serif Khmer Thin
  * Noto Serif Lao Blk
  * Noto Serif Lao Cond
  * Noto Serif Lao Cond Blk
  * Noto Serif Lao Cond ExtBd
  * Noto Serif Lao Cond ExtLt
  * Noto Serif Lao Cond Light
  * Noto Serif Lao Cond Med
  * Noto Serif Lao Cond SemBd
  * Noto Serif Lao Cond Thin
  * Noto Serif Lao ExtBd
  * Noto Serif Lao ExtCond
  * Noto Serif Lao ExtCond Blk
  * Noto Serif Lao ExtCond ExtBd
  * Noto Serif Lao ExtCond ExtLt
  * Noto Serif Lao ExtCond Light
  * Noto Serif Lao ExtCond Med
  * Noto Serif Lao ExtCond SemBd
  * Noto Serif Lao ExtCond Thin
  * Noto Serif Lao ExtLt
  * Noto Serif Lao Light
  * Noto Serif Lao Med
  * Noto Serif Lao SemBd
  * Noto Serif Lao SemCond
  * Noto Serif Lao SemCond Blk
  * Noto Serif Lao SemCond ExtBd
  * Noto Serif Lao SemCond ExtLt
  * Noto Serif Lao SemCond Light
  * Noto Serif Lao SemCond Med
  * Noto Serif Lao SemCond SemBd
  * Noto Serif Lao SemCond Thin
  * Noto Serif Lao Thin
  * Noto Serif Light
  * Noto Serif Malayalam Black
  * Noto Serif Malayalam ExtraBold
  * Noto Serif Malayalam ExtraLight
  * Noto Serif Malayalam Light
  * Noto Serif Malayalam Medium
  * Noto Serif Malayalam SemiBold
  * Noto Serif Malayalam Thin
  * Noto Serif Medium
  * Noto Serif Myanmar Blk
  * Noto Serif Myanmar Cond Blk
  * Noto Serif Myanmar Cond ExtBd
  * Noto Serif Myanmar Cond ExtLt
  * Noto Serif Myanmar Cond Med
  * Noto Serif Myanmar Cond SemBd
  * Noto Serif Myanmar Cond Thin
  * Noto Serif Myanmar Condensed
  * Noto Serif Myanmar Condensed Bold
  * Noto Serif Myanmar Condensed Light
  * Noto Serif Myanmar ExtBd
  * Noto Serif Myanmar ExtCond
  * Noto Serif Myanmar ExtCond Blk
  * Noto Serif Myanmar ExtCond ExtBd
  * Noto Serif Myanmar ExtCond ExtLt
  * Noto Serif Myanmar ExtCond Light
  * Noto Serif Myanmar ExtCond Med
  * Noto Serif Myanmar ExtCond SemBd
  * Noto Serif Myanmar ExtCond Thin
  * Noto Serif Myanmar ExtLt
  * Noto Serif Myanmar Light
  * Noto Serif Myanmar Med
  * Noto Serif Myanmar SemBd
  * Noto Serif Myanmar SemCond
  * Noto Serif Myanmar SemCond Blk
  * Noto Serif Myanmar SemCond ExtBd
  * Noto Serif Myanmar SemCond ExtLt
  * Noto Serif Myanmar SemCond Light
  * Noto Serif Myanmar SemCond Med
  * Noto Serif Myanmar SemCond SemBd
  * Noto Serif Myanmar SemCond Thin
  * Noto Serif Myanmar Thin
  * Noto Serif SemiBold
  * Noto Serif SemiCondensed
  * Noto Serif SemiCondensed Black
  * Noto Serif SemiCondensed ExtraBold
  * Noto Serif SemiCondensed ExtraLight
  * Noto Serif SemiCondensed Light
  * Noto Serif SemiCondensed Medium
  * Noto Serif SemiCondensed SemiBold
  * Noto Serif SemiCondensed Thin
  * Noto Serif Sinhala Black
  * Noto Serif Sinhala Condensed
  * Noto Serif Sinhala Condensed Black
  * Noto Serif Sinhala Condensed ExtraBold
  * Noto Serif Sinhala Condensed ExtraLight
  * Noto Serif Sinhala Condensed Light
  * Noto Serif Sinhala Condensed Medium
  * Noto Serif Sinhala Condensed SemiBold
  * Noto Serif Sinhala Condensed Thin
  * Noto Serif Sinhala ExtraBold
  * Noto Serif Sinhala ExtraCondensed
  * Noto Serif Sinhala ExtraCondensed Black
  * Noto Serif Sinhala ExtraCondensed ExtraBold
  * Noto Serif Sinhala ExtraCondensed ExtraLight
  * Noto Serif Sinhala ExtraCondensed Light
  * Noto Serif Sinhala ExtraCondensed Medium
  * Noto Serif Sinhala ExtraCondensed SemiBold
  * Noto Serif Sinhala ExtraCondensed Thin
  * Noto Serif Sinhala ExtraLight
  * Noto Serif Sinhala Light
  * Noto Serif Sinhala Medium
  * Noto Serif Sinhala SemiBold
  * Noto Serif Sinhala SemiCondensed
  * Noto Serif Sinhala SemiCondensed Black
  * Noto Serif Sinhala SemiCondensed ExtraBold
  * Noto Serif Sinhala SemiCondensed ExtraLight
  * Noto Serif Sinhala SemiCondensed Light
  * Noto Serif Sinhala SemiCondensed Medium
  * Noto Serif Sinhala SemiCondensed SemiBold
  * Noto Serif Sinhala SemiCondensed Thin
  * Noto Serif Sinhala Thin
  * Noto Serif Tamil Black
  * Noto Serif Tamil Condensed
  * Noto Serif Tamil Condensed Black
  * Noto Serif Tamil Condensed ExtraBold
  * Noto Serif Tamil Condensed ExtraLight
  * Noto Serif Tamil Condensed Light
  * Noto Serif Tamil Condensed Medium
  * Noto Serif Tamil Condensed SemiBold
  * Noto Serif Tamil Condensed Thin
  * Noto Serif Tamil ExtraBold
  * Noto Serif Tamil ExtraCondensed
  * Noto Serif Tamil ExtraCondensed Black
  * Noto Serif Tamil ExtraCondensed ExtraBold
  * Noto Serif Tamil ExtraCondensed ExtraLight
  * Noto Serif Tamil ExtraCondensed Light
  * Noto Serif Tamil ExtraCondensed Medium
  * Noto Serif Tamil ExtraCondensed SemiBold
  * Noto Serif Tamil ExtraCondensed Thin
  * Noto Serif Tamil ExtraLight
  * Noto Serif Tamil Light
  * Noto Serif Tamil Medium
  * Noto Serif Tamil SemiBold
  * Noto Serif Tamil SemiCondensed
  * Noto Serif Tamil SemiCondensed Black
  * Noto Serif Tamil SemiCondensed ExtraBold
  * Noto Serif Tamil SemiCondensed ExtraLight
  * Noto Serif Tamil SemiCondensed Light
  * Noto Serif Tamil SemiCondensed Medium
  * Noto Serif Tamil SemiCondensed SemiBold
  * Noto Serif Tamil SemiCondensed Thin
  * Noto Serif Tamil Thin
  * Noto Serif Telugu Black
  * Noto Serif Telugu ExtraBold
  * Noto Serif Telugu ExtraLight
  * Noto Serif Telugu Light
  * Noto Serif Telugu Medium
  * Noto Serif Telugu SemiBold
  * Noto Serif Telugu Thin
  * Noto Serif Thai Blk
  * Noto Serif Thai Cond
  * Noto Serif Thai Cond Blk
  * Noto Serif Thai Cond ExtBd
  * Noto Serif Thai Cond ExtLt
  * Noto Serif Thai Cond Light
  * Noto Serif Thai Cond Med
  * Noto Serif Thai Cond SemBd
  * Noto Serif Thai Cond Thin
  * Noto Serif Thai ExtBd
  * Noto Serif Thai ExtCond
  * Noto Serif Thai ExtCond Blk
  * Noto Serif Thai ExtCond ExtBd
  * Noto Serif Thai ExtCond ExtLt
  * Noto Serif Thai ExtCond Light
  * Noto Serif Thai ExtCond Med
  * Noto Serif Thai ExtCond SemBd
  * Noto Serif Thai ExtCond Thin
  * Noto Serif Thai ExtLt
  * Noto Serif Thai Light
  * Noto Serif Thai Med
  * Noto Serif Thai SemBd
  * Noto Serif Thai SemCond
  * Noto Serif Thai SemCond Blk
  * Noto Serif Thai SemCond ExtBd
  * Noto Serif Thai SemCond ExtLt
  * Noto Serif Thai SemCond Light
  * Noto Serif Thai SemCond Med
  * Noto Serif Thai SemCond SemBd
  * Noto Serif Thai SemCond Thin
  * Noto Serif Thai Thin
  * Noto Serif Thin
  * Noto Serif Tibetan Black
  * Noto Serif Tibetan ExtraBold
  * Noto Serif Tibetan ExtraLight
  * Noto Serif Tibetan Light
  * Noto Serif Tibetan Medium
  * Noto Serif Tibetan SemiBold
  * Noto Serif Tibetan Thin
  * Noto Serif Yezidi Medium
  * Noto Serif Yezidi SemiBold
  * NotoSerifTamilSlanted Black
  * NotoSerifTamilSlanted Condensed
  * NotoSerifTamilSlanted Condensed Black
  * NotoSerifTamilSlanted Condensed ExtraBold
  * NotoSerifTamilSlanted Condensed ExtraLight
  * NotoSerifTamilSlanted Condensed Light
  * NotoSerifTamilSlanted Condensed Medium
  * NotoSerifTamilSlanted Condensed SemiBold
  * NotoSerifTamilSlanted Condensed Thin
  * NotoSerifTamilSlanted ExtraBold
  * NotoSerifTamilSlanted ExtraCondensed
  * NotoSerifTamilSlanted ExtraCondensed Black
  * NotoSerifTamilSlanted ExtraCondensed ExtraBold
  * NotoSerifTamilSlanted ExtraCondensed ExtraLight
  * NotoSerifTamilSlanted ExtraCondensed Light
  * NotoSerifTamilSlanted ExtraCondensed Medium
  * NotoSerifTamilSlanted ExtraCondensed SemiBold
  * NotoSerifTamilSlanted ExtraCondensed Thin
  * NotoSerifTamilSlanted ExtraLight
  * NotoSerifTamilSlanted Light
  * NotoSerifTamilSlanted Medium
  * NotoSerifTamilSlanted SemiBold
  * NotoSerifTamilSlanted SemiCondensed
  * NotoSerifTamilSlanted SemiCondensed Black
  * NotoSerifTamilSlanted SemiCondensed ExtraBold
  * NotoSerifTamilSlanted SemiCondensed ExtraLight
  * NotoSerifTamilSlanted SemiCondensed Light
  * NotoSerifTamilSlanted SemiCondensed Medium
  * NotoSerifTamilSlanted SemiCondensed SemiBold
  * NotoSerifTamilSlanted SemiCondensed Thin
  * NotoSerifTamilSlanted Thin
 .
 The name "Noto" is short for "No Tofu",
 describing the aim of covering all living Unicode scripts
 (currently 65 are covered, at least partly.
 .
 Tofu (豆腐) is Japanese jargon
 for unicode replacement character "�" (U+FFFD)
 often displayed as replacement for unassigned or unknown characters.
Homepage: https://www.google.com/get/noto/

Package: fonts-noto-mono
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 1160
Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: fonts-noto
Version: 20201225-1
Replaces: fonts-noto-core (<< 20201027-2~), fonts-noto-unhinted (<< 20201027-3~)
Breaks: fonts-noto-core (<< 20201027-2~), fonts-noto-unhinted (<< 20201027-3~)
Enhances: fonts-noto-core
Conffiles:
 /etc/fonts/conf.avail/30-droid-noto-mono.conf 3637d988826c19a1859d29b79ee01e87
Description: "No Tofu" monospaced font family with large Unicode coverage
 Noto is a collection of font families,
 each visually harmonized across scripts.
 .
 This package contains Noto Mono font family
 (formerly known as Droid Mono),
 and core weights for the Noto Sans Mono font family.
 Beware that Noto Mono has a much smaller repertoire
 than Noto Sans or Noto Serif.
 .
 The name "Noto" is short for "No Tofu",
 describing the aim of covering all living Unicode scripts.
 .
 Tofu (豆腐) is Japanese jargon
 for unicode replacement character "�" (U+FFFD)
 often displayed as replacement for unassigned or unknown characters.
Homepage: https://www.google.com/get/noto/

Package: fonts-noto-ui-core
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 5064
Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: fonts-noto
Version: 20201225-1
Replaces: fonts-noto (<< 2015-05-11+cjk-1~), fonts-noto-hinted (<< 20181130-2~), fonts-noto-unhinted (<< 20181227-2~)
Suggests: fonts-noto-core
Breaks: fonts-noto (<< 2015-05-11+cjk-1~), fonts-noto-hinted (<< 20181130-2~), fonts-noto-unhinted (<< 20181227-2~)
Description: "No Tofu" font families with large Unicode coverage (UI core)
 Noto is a collection of font families,
 each visually harmonized across scripts.
 .
 This package contains core weights for these Noto UI font families:
 .
  * Noto Looped Lao UI Bold
  * Noto Looped Lao UI Regular
  * Noto Looped Thai UI Bold
  * Noto Looped Thai UI Regular
  * Noto Naskh Arabic UI
  * Noto Sans Arabic UI
  * Noto Sans Bengali UI
  * Noto Sans Devanagari UI
  * Noto Sans Gujarati UI
  * Noto Sans Gurmukhi UI
  * Noto Sans Kannada UI
  * Noto Sans Khmer UI
  * Noto Sans Lao UI
  * Noto Sans Malayalam UI
  * Noto Sans Myanmar UI
  * Noto Sans Oriya UI
  * Noto Sans Sinhala UI
  * Noto Sans Tamil UI
  * Noto Sans Telugu UI
  * Noto Sans Thai UI
 .
 Noto UI fonts are for text display in UI elements
 (e.g. buttons, menus) that have a height limit.
 .
 The name "Noto" is short for "No Tofu",
 describing the aim of covering all living Unicode scripts.
 .
 Tofu (豆腐) is Japanese jargon
 for unicode replacement character "�" (U+FFFD)
 often displayed as replacement for unassigned or unknown characters.
Homepage: https://www.google.com/get/noto/

Package: fonts-noto-ui-extra
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 72050
Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: fonts-noto
Version: 20201225-1
Replaces: fonts-noto-unhinted (<< 20201027-1~)
Suggests: fonts-noto-extra
Breaks: fonts-noto-unhinted (<< 20201027-1~)
Enhances: fonts-noto-ui-core
Description: "No Tofu" font families with large Unicode coverage (UI extra)
 Noto is a collection of font families,
 each visually harmonized across scripts.
 .
 This package contains extra weights for these Noto UI font families:
 .
  * Noto Looped Lao UI Black
  * Noto Looped Lao UI Cond Blk
  * Noto Looped Lao UI Cond Bold
  * Noto Looped Lao UI Cond ExBd
  * Noto Looped Lao UI Cond ExLt
  * Noto Looped Lao UI Cond Lt
  * Noto Looped Lao UI Cond Med
  * Noto Looped Lao UI Cond SmBd
  * Noto Looped Lao UI Cond Thin
  * Noto Looped Lao UI Condensed
  * Noto Looped Lao UI ExCd Blk
  * Noto Looped Lao UI ExCd Bold
  * Noto Looped Lao UI ExCd ExBd
  * Noto Looped Lao UI ExCd ExLt
  * Noto Looped Lao UI ExCd Lt
  * Noto Looped Lao UI ExCd Med
  * Noto Looped Lao UI ExCd SmBd
  * Noto Looped Lao UI ExCd Thin
  * Noto Looped Lao UI ExtLight
  * Noto Looped Lao UI ExtraBold
  * Noto Looped Lao UI ExtraCond
  * Noto Looped Lao UI Light
  * Noto Looped Lao UI Medium
  * Noto Looped Lao UI SemiBold
  * Noto Looped Lao UI SemiCond
  * Noto Looped Lao UI SmCd Blk
  * Noto Looped Lao UI SmCd Bold
  * Noto Looped Lao UI SmCd ExBd
  * Noto Looped Lao UI SmCd ExtLt
  * Noto Looped Lao UI SmCd Lt
  * Noto Looped Lao UI SmCd Med
  * Noto Looped Lao UI SmCd SmBd
  * Noto Looped Lao UI SmCd Thin
  * Noto Looped Lao UI Thin
  * Noto Looped Thai UI Black
  * Noto Looped Thai UI Cond Blk
  * Noto Looped Thai UI Cond Bold
  * Noto Looped Thai UI Cond ExBd
  * Noto Looped Thai UI Cond ExLt
  * Noto Looped Thai UI Cond Lt
  * Noto Looped Thai UI Cond Med
  * Noto Looped Thai UI Cond SmBd
  * Noto Looped Thai UI Cond Thin
  * Noto Looped Thai UI Condensed
  * Noto Looped Thai UI ExCd Blk
  * Noto Looped Thai UI ExCd Bold
  * Noto Looped Thai UI ExCd ExBd
  * Noto Looped Thai UI ExCd ExLt
  * Noto Looped Thai UI ExCd Lt
  * Noto Looped Thai UI ExCd Med
  * Noto Looped Thai UI ExCd SmBd
  * Noto Looped Thai UI ExCd Thin
  * Noto Looped Thai UI ExtLight
  * Noto Looped Thai UI ExtraBold
  * Noto Looped Thai UI ExtraCond
  * Noto Looped Thai UI Light
  * Noto Looped Thai UI Medium
  * Noto Looped Thai UI SemiBold
  * Noto Looped Thai UI SemiCond
  * Noto Looped Thai UI SmCd Blk
  * Noto Looped Thai UI SmCd Bold
  * Noto Looped Thai UI SmCd ExBd
  * Noto Looped Thai UI SmCd ExLt
  * Noto Looped Thai UI SmCd Lt
  * Noto Looped Thai UI SmCd Med
  * Noto Looped Thai UI SmCd SmBd
  * Noto Looped Thai UI SmCd Thin
  * Noto Looped Thai UI Thin
  * Noto Naskh Arabic UI Medium
  * Noto Naskh Arabic UI Semi Bold
  * Noto Sans Arabic UI Bk
  * Noto Sans Arabic UI Cn
  * Noto Sans Arabic UI Cn Bk
  * Noto Sans Arabic UI Cn Lt
  * Noto Sans Arabic UI Cn Md
  * Noto Sans Arabic UI Cn SmBd
  * Noto Sans Arabic UI Cn Th
  * Noto Sans Arabic UI Cn XBd
  * Noto Sans Arabic UI Cn XLt
  * Noto Sans Arabic UI Lt
  * Noto Sans Arabic UI Md
  * Noto Sans Arabic UI SmBd
  * Noto Sans Arabic UI SmCn
  * Noto Sans Arabic UI SmCn Bk
  * Noto Sans Arabic UI SmCn Lt
  * Noto Sans Arabic UI SmCn Md
  * Noto Sans Arabic UI SmCn SmBd
  * Noto Sans Arabic UI SmCn Th
  * Noto Sans Arabic UI SmCn XBd
  * Noto Sans Arabic UI SmCn XLt
  * Noto Sans Arabic UI Th
  * Noto Sans Arabic UI XBd
  * Noto Sans Arabic UI XCn
  * Noto Sans Arabic UI XCn Bk
  * Noto Sans Arabic UI XCn Lt
  * Noto Sans Arabic UI XCn Md
  * Noto Sans Arabic UI XCn SmBd
  * Noto Sans Arabic UI XCn Th
  * Noto Sans Arabic UI XCn XBd
  * Noto Sans Arabic UI XCn XLt
  * Noto Sans Arabic UI XLt
  * Noto Sans Bengali UI Black
  * Noto Sans Bengali UI Condensed
  * Noto Sans Bengali UI ExtraBold
  * Noto Sans Bengali UI ExtraCondensed
  * Noto Sans Bengali UI ExtraLight
  * Noto Sans Bengali UI Light
  * Noto Sans Bengali UI Medium
  * Noto Sans Bengali UI SemiBold
  * Noto Sans Bengali UI SemiCondensed
  * Noto Sans Bengali UI Thin
  * Noto Sans Devanagari UI Black
  * Noto Sans Devanagari UI Condensed
  * Noto Sans Devanagari UI Condensed Black
  * Noto Sans Devanagari UI Condensed ExtraBold
  * Noto Sans Devanagari UI Condensed ExtraLight
  * Noto Sans Devanagari UI Condensed Light
  * Noto Sans Devanagari UI Condensed Medium
  * Noto Sans Devanagari UI Condensed SemiBold
  * Noto Sans Devanagari UI Condensed Thin
  * Noto Sans Devanagari UI ExtraBold
  * Noto Sans Devanagari UI ExtraCondensed
  * Noto Sans Devanagari UI ExtraCondensed Black
  * Noto Sans Devanagari UI ExtraCondensed ExtraBold
  * Noto Sans Devanagari UI ExtraCondensed ExtraLight
  * Noto Sans Devanagari UI ExtraCondensed Light
  * Noto Sans Devanagari UI ExtraCondensed Medium
  * Noto Sans Devanagari UI ExtraCondensed SemiBold
  * Noto Sans Devanagari UI ExtraCondensed Thin
  * Noto Sans Devanagari UI ExtraLight
  * Noto Sans Devanagari UI Light
  * Noto Sans Devanagari UI Medium
  * Noto Sans Devanagari UI SemiBold
  * Noto Sans Devanagari UI SemiCondensed
  * Noto Sans Devanagari UI SemiCondensed Black
  * Noto Sans Devanagari UI SemiCondensed ExtraBold
  * Noto Sans Devanagari UI SemiCondensed ExtraLight
  * Noto Sans Devanagari UI SemiCondensed Light
  * Noto Sans Devanagari UI SemiCondensed Medium
  * Noto Sans Devanagari UI SemiCondensed SemiBold
  * Noto Sans Devanagari UI SemiCondensed Thin
  * Noto Sans Devanagari UI Thin
  * Noto Sans Gujarati UI Black
  * Noto Sans Gujarati UI Condensed
  * Noto Sans Gujarati UI Condensed Black
  * Noto Sans Gujarati UI Condensed ExtraBold
  * Noto Sans Gujarati UI Condensed ExtraLight
  * Noto Sans Gujarati UI Condensed Light
  * Noto Sans Gujarati UI Condensed Medium
  * Noto Sans Gujarati UI Condensed SemiBold
  * Noto Sans Gujarati UI Condensed Thin
  * Noto Sans Gujarati UI ExtraBold
  * Noto Sans Gujarati UI ExtraCondensed
  * Noto Sans Gujarati UI ExtraCondensed Black
  * Noto Sans Gujarati UI ExtraCondensed ExtraBold
  * Noto Sans Gujarati UI ExtraCondensed ExtraLight
  * Noto Sans Gujarati UI ExtraCondensed Light
  * Noto Sans Gujarati UI ExtraCondensed Medium
  * Noto Sans Gujarati UI ExtraCondensed SemiBold
  * Noto Sans Gujarati UI ExtraCondensed Thin
  * Noto Sans Gujarati UI ExtraLight
  * Noto Sans Gujarati UI Light
  * Noto Sans Gujarati UI Medium
  * Noto Sans Gujarati UI SemiBold
  * Noto Sans Gujarati UI SemiCondensed
  * Noto Sans Gujarati UI SemiCondensed Black
  * Noto Sans Gujarati UI SemiCondensed ExtraBold
  * Noto Sans Gujarati UI SemiCondensed ExtraLight
  * Noto Sans Gujarati UI SemiCondensed Light
  * Noto Sans Gujarati UI SemiCondensed Medium
  * Noto Sans Gujarati UI SemiCondensed SemiBold
  * Noto Sans Gujarati UI SemiCondensed Thin
  * Noto Sans Gujarati UI Thin
  * Noto Sans Gurmukhi UI Black
  * Noto Sans Gurmukhi UI Condensed
  * Noto Sans Gurmukhi UI Condensed Black
  * Noto Sans Gurmukhi UI Condensed ExtraBold
  * Noto Sans Gurmukhi UI Condensed ExtraLight
  * Noto Sans Gurmukhi UI Condensed Light
  * Noto Sans Gurmukhi UI Condensed Medium
  * Noto Sans Gurmukhi UI Condensed SemiBold
  * Noto Sans Gurmukhi UI Condensed Thin
  * Noto Sans Gurmukhi UI ExtraBold
  * Noto Sans Gurmukhi UI ExtraCondensed
  * Noto Sans Gurmukhi UI ExtraCondensed Black
  * Noto Sans Gurmukhi UI ExtraCondensed ExtraBold
  * Noto Sans Gurmukhi UI ExtraCondensed ExtraLight
  * Noto Sans Gurmukhi UI ExtraCondensed Light
  * Noto Sans Gurmukhi UI ExtraCondensed Medium
  * Noto Sans Gurmukhi UI ExtraCondensed SemiBold
  * Noto Sans Gurmukhi UI ExtraCondensed Thin
  * Noto Sans Gurmukhi UI ExtraLight
  * Noto Sans Gurmukhi UI Light
  * Noto Sans Gurmukhi UI Medium
  * Noto Sans Gurmukhi UI SemiBold
  * Noto Sans Gurmukhi UI SemiCondensed
  * Noto Sans Gurmukhi UI SemiCondensed Black
  * Noto Sans Gurmukhi UI SemiCondensed ExtraBold
  * Noto Sans Gurmukhi UI SemiCondensed ExtraLight
  * Noto Sans Gurmukhi UI SemiCondensed Light
  * Noto Sans Gurmukhi UI SemiCondensed Medium
  * Noto Sans Gurmukhi UI SemiCondensed SemiBold
  * Noto Sans Gurmukhi UI SemiCondensed Thin
  * Noto Sans Gurmukhi UI Thin
  * Noto Sans Kannada UI Black
  * Noto Sans Kannada UI Condensed
  * Noto Sans Kannada UI Condensed Black
  * Noto Sans Kannada UI Condensed ExtraBold
  * Noto Sans Kannada UI Condensed ExtraLight
  * Noto Sans Kannada UI Condensed Light
  * Noto Sans Kannada UI Condensed Medium
  * Noto Sans Kannada UI Condensed SemiBold
  * Noto Sans Kannada UI Condensed Thin
  * Noto Sans Kannada UI ExtraBold
  * Noto Sans Kannada UI ExtraCondensed
  * Noto Sans Kannada UI ExtraCondensed Black
  * Noto Sans Kannada UI ExtraCondensed ExtraBold
  * Noto Sans Kannada UI ExtraCondensed ExtraLight
  * Noto Sans Kannada UI ExtraCondensed Light
  * Noto Sans Kannada UI ExtraCondensed Medium
  * Noto Sans Kannada UI ExtraCondensed SemiBold
  * Noto Sans Kannada UI ExtraCondensed Thin
  * Noto Sans Kannada UI ExtraLight
  * Noto Sans Kannada UI Light
  * Noto Sans Kannada UI Medium
  * Noto Sans Kannada UI SemiBold
  * Noto Sans Kannada UI SemiCondensed
  * Noto Sans Kannada UI SemiCondensed Black
  * Noto Sans Kannada UI SemiCondensed ExtraBold
  * Noto Sans Kannada UI SemiCondensed ExtraLight
  * Noto Sans Kannada UI SemiCondensed Light
  * Noto Sans Kannada UI SemiCondensed Medium
  * Noto Sans Kannada UI SemiCondensed SemiBold
  * Noto Sans Kannada UI SemiCondensed Thin
  * Noto Sans Kannada UI Thin
  * Noto Sans Khmer UI Black
  * Noto Sans Khmer UI Condensed
  * Noto Sans Khmer UI Condensed Black
  * Noto Sans Khmer UI Condensed ExtraBold
  * Noto Sans Khmer UI Condensed ExtraLight
  * Noto Sans Khmer UI Condensed Light
  * Noto Sans Khmer UI Condensed Medium
  * Noto Sans Khmer UI Condensed SemiBold
  * Noto Sans Khmer UI Condensed Thin
  * Noto Sans Khmer UI ExtraBold
  * Noto Sans Khmer UI ExtraCondensed
  * Noto Sans Khmer UI ExtraCondensed Black
  * Noto Sans Khmer UI ExtraCondensed ExtraBold
  * Noto Sans Khmer UI ExtraCondensed ExtraLight
  * Noto Sans Khmer UI ExtraCondensed Light
  * Noto Sans Khmer UI ExtraCondensed Medium
  * Noto Sans Khmer UI ExtraCondensed SemiBold
  * Noto Sans Khmer UI ExtraCondensed Thin
  * Noto Sans Khmer UI ExtraLight
  * Noto Sans Khmer UI Light
  * Noto Sans Khmer UI Medium
  * Noto Sans Khmer UI SemiBold
  * Noto Sans Khmer UI SemiCondensed
  * Noto Sans Khmer UI SemiCondensed Black
  * Noto Sans Khmer UI SemiCondensed ExtraBold
  * Noto Sans Khmer UI SemiCondensed ExtraLight
  * Noto Sans Khmer UI SemiCondensed Light
  * Noto Sans Khmer UI SemiCondensed Medium
  * Noto Sans Khmer UI SemiCondensed SemiBold
  * Noto Sans Khmer UI SemiCondensed Thin
  * Noto Sans Khmer UI Thin
  * Noto Sans Lao UI Blk
  * Noto Sans Lao UI Cond
  * Noto Sans Lao UI Cond Blk
  * Noto Sans Lao UI Cond ExtBd
  * Noto Sans Lao UI Cond ExtLt
  * Noto Sans Lao UI Cond Light
  * Noto Sans Lao UI Cond Med
  * Noto Sans Lao UI Cond SemBd
  * Noto Sans Lao UI Cond Thin
  * Noto Sans Lao UI ExtBd
  * Noto Sans Lao UI ExtCond
  * Noto Sans Lao UI ExtCond Blk
  * Noto Sans Lao UI ExtCond ExtBd
  * Noto Sans Lao UI ExtCond ExtLt
  * Noto Sans Lao UI ExtCond Light
  * Noto Sans Lao UI ExtCond Med
  * Noto Sans Lao UI ExtCond SemBd
  * Noto Sans Lao UI ExtCond Thin
  * Noto Sans Lao UI ExtLt
  * Noto Sans Lao UI Light
  * Noto Sans Lao UI Med
  * Noto Sans Lao UI SemBd
  * Noto Sans Lao UI SemCond
  * Noto Sans Lao UI SemCond Blk
  * Noto Sans Lao UI SemCond ExtBd
  * Noto Sans Lao UI SemCond ExtLt
  * Noto Sans Lao UI SemCond Light
  * Noto Sans Lao UI SemCond Med
  * Noto Sans Lao UI SemCond SemBd
  * Noto Sans Lao UI SemCond Thin
  * Noto Sans Lao UI Thin
  * Noto Sans Malayalam UI Black
  * Noto Sans Malayalam UI Condensed
  * Noto Sans Malayalam UI Condensed Black
  * Noto Sans Malayalam UI Condensed ExtraBold
  * Noto Sans Malayalam UI Condensed ExtraLight
  * Noto Sans Malayalam UI Condensed Light
  * Noto Sans Malayalam UI Condensed Medium
  * Noto Sans Malayalam UI Condensed SemiBold
  * Noto Sans Malayalam UI Condensed Thin
  * Noto Sans Malayalam UI ExtraBold
  * Noto Sans Malayalam UI ExtraCondensed
  * Noto Sans Malayalam UI ExtraCondensed Black
  * Noto Sans Malayalam UI ExtraCondensed ExtraBold
  * Noto Sans Malayalam UI ExtraCondensed ExtraLight
  * Noto Sans Malayalam UI ExtraCondensed Light
  * Noto Sans Malayalam UI ExtraCondensed Medium
  * Noto Sans Malayalam UI ExtraCondensed SemiBold
  * Noto Sans Malayalam UI ExtraCondensed Thin
  * Noto Sans Malayalam UI ExtraLight
  * Noto Sans Malayalam UI Light
  * Noto Sans Malayalam UI Medium
  * Noto Sans Malayalam UI SemiBold
  * Noto Sans Malayalam UI SemiCondensed
  * Noto Sans Malayalam UI SemiCondensed Black
  * Noto Sans Malayalam UI SemiCondensed ExtraBold
  * Noto Sans Malayalam UI SemiCondensed ExtraLight
  * Noto Sans Malayalam UI SemiCondensed Light
  * Noto Sans Malayalam UI SemiCondensed Medium
  * Noto Sans Malayalam UI SemiCondensed SemiBold
  * Noto Sans Malayalam UI SemiCondensed Thin
  * Noto Sans Malayalam UI Thin
  * Noto Sans Myanmar UI Black
  * Noto Sans Myanmar UI Condensed
  * Noto Sans Myanmar UI Condensed Black
  * Noto Sans Myanmar UI Condensed ExtraBold
  * Noto Sans Myanmar UI Condensed ExtraLight
  * Noto Sans Myanmar UI Condensed Light
  * Noto Sans Myanmar UI Condensed Medium
  * Noto Sans Myanmar UI Condensed SemiBold
  * Noto Sans Myanmar UI Condensed Thin
  * Noto Sans Myanmar UI ExtraBold
  * Noto Sans Myanmar UI ExtraCondensed
  * Noto Sans Myanmar UI ExtraCondensed Black
  * Noto Sans Myanmar UI ExtraCondensed ExtraBold
  * Noto Sans Myanmar UI ExtraCondensed ExtraLight
  * Noto Sans Myanmar UI ExtraCondensed Light
  * Noto Sans Myanmar UI ExtraCondensed Medium
  * Noto Sans Myanmar UI ExtraCondensed SemiBold
  * Noto Sans Myanmar UI ExtraCondensed Thin
  * Noto Sans Myanmar UI ExtraLight
  * Noto Sans Myanmar UI Light
  * Noto Sans Myanmar UI Medium
  * Noto Sans Myanmar UI SemiBold
  * Noto Sans Myanmar UI SemiCondensed
  * Noto Sans Myanmar UI SemiCondensed Black
  * Noto Sans Myanmar UI SemiCondensed ExtraBold
  * Noto Sans Myanmar UI SemiCondensed ExtraLight
  * Noto Sans Myanmar UI SemiCondensed Light
  * Noto Sans Myanmar UI SemiCondensed Medium
  * Noto Sans Myanmar UI SemiCondensed SemiBold
  * Noto Sans Myanmar UI SemiCondensed Thin
  * Noto Sans Myanmar UI Thin
  * Noto Sans Oriya UI Blk
  * Noto Sans Oriya UI Cond
  * Noto Sans Oriya UI Cond Blk
  * Noto Sans Oriya UI Cond Bold
  * Noto Sans Oriya UI Cond Thin
  * Noto Sans Oriya UI ExtCond
  * Noto Sans Oriya UI ExtCond Blk
  * Noto Sans Oriya UI ExtCond Bold
  * Noto Sans Oriya UI ExtCond Thin
  * Noto Sans Oriya UI Thin
  * Noto Sans Sinhala UI Black
  * Noto Sans Sinhala UI Condensed
  * Noto Sans Sinhala UI Condensed Black
  * Noto Sans Sinhala UI Condensed ExtraBold
  * Noto Sans Sinhala UI Condensed ExtraLight
  * Noto Sans Sinhala UI Condensed Light
  * Noto Sans Sinhala UI Condensed Medium
  * Noto Sans Sinhala UI Condensed SemiBold
  * Noto Sans Sinhala UI Condensed Thin
  * Noto Sans Sinhala UI ExtraBold
  * Noto Sans Sinhala UI ExtraCondensed
  * Noto Sans Sinhala UI ExtraCondensed Black
  * Noto Sans Sinhala UI ExtraCondensed ExtraBold
  * Noto Sans Sinhala UI ExtraCondensed ExtraLight
  * Noto Sans Sinhala UI ExtraCondensed Light
  * Noto Sans Sinhala UI ExtraCondensed Medium
  * Noto Sans Sinhala UI ExtraCondensed SemiBold
  * Noto Sans Sinhala UI ExtraCondensed Thin
  * Noto Sans Sinhala UI ExtraLight
  * Noto Sans Sinhala UI Light
  * Noto Sans Sinhala UI Medium
  * Noto Sans Sinhala UI SemiBold
  * Noto Sans Sinhala UI SemiCondensed
  * Noto Sans Sinhala UI SemiCondensed Black
  * Noto Sans Sinhala UI SemiCondensed ExtraBold
  * Noto Sans Sinhala UI SemiCondensed ExtraLight
  * Noto Sans Sinhala UI SemiCondensed Light
  * Noto Sans Sinhala UI SemiCondensed Medium
  * Noto Sans Sinhala UI SemiCondensed SemiBold
  * Noto Sans Sinhala UI SemiCondensed Thin
  * Noto Sans Sinhala UI Thin
  * Noto Sans Tamil UI Black
  * Noto Sans Tamil UI Condensed
  * Noto Sans Tamil UI Condensed Black
  * Noto Sans Tamil UI Condensed ExtraBold
  * Noto Sans Tamil UI Condensed ExtraLight
  * Noto Sans Tamil UI Condensed Light
  * Noto Sans Tamil UI Condensed Medium
  * Noto Sans Tamil UI Condensed SemiBold
  * Noto Sans Tamil UI Condensed Thin
  * Noto Sans Tamil UI ExtraBold
  * Noto Sans Tamil UI ExtraCondensed
  * Noto Sans Tamil UI ExtraCondensed Black
  * Noto Sans Tamil UI ExtraCondensed ExtraBold
  * Noto Sans Tamil UI ExtraCondensed ExtraLight
  * Noto Sans Tamil UI ExtraCondensed Light
  * Noto Sans Tamil UI ExtraCondensed Medium
  * Noto Sans Tamil UI ExtraCondensed SemiBold
  * Noto Sans Tamil UI ExtraCondensed Thin
  * Noto Sans Tamil UI ExtraLight
  * Noto Sans Tamil UI Light
  * Noto Sans Tamil UI Medium
  * Noto Sans Tamil UI SemiBold
  * Noto Sans Tamil UI SemiCondensed
  * Noto Sans Tamil UI SemiCondensed Black
  * Noto Sans Tamil UI SemiCondensed ExtraBold
  * Noto Sans Tamil UI SemiCondensed ExtraLight
  * Noto Sans Tamil UI SemiCondensed Light
  * Noto Sans Tamil UI SemiCondensed Medium
  * Noto Sans Tamil UI SemiCondensed SemiBold
  * Noto Sans Tamil UI SemiCondensed Thin
  * Noto Sans Tamil UI Thin
  * Noto Sans Telugu UI Black
  * Noto Sans Telugu UI Condensed
  * Noto Sans Telugu UI Condensed Black
  * Noto Sans Telugu UI Condensed ExtraBold
  * Noto Sans Telugu UI Condensed ExtraLight
  * Noto Sans Telugu UI Condensed Light
  * Noto Sans Telugu UI Condensed Medium
  * Noto Sans Telugu UI Condensed SemiBold
  * Noto Sans Telugu UI Condensed Thin
  * Noto Sans Telugu UI ExtraBold
  * Noto Sans Telugu UI ExtraCondensed
  * Noto Sans Telugu UI ExtraCondensed Black
  * Noto Sans Telugu UI ExtraCondensed ExtraBold
  * Noto Sans Telugu UI ExtraCondensed ExtraLight
  * Noto Sans Telugu UI ExtraCondensed Light
  * Noto Sans Telugu UI ExtraCondensed Medium
  * Noto Sans Telugu UI ExtraCondensed SemiBold
  * Noto Sans Telugu UI ExtraCondensed Thin
  * Noto Sans Telugu UI ExtraLight
  * Noto Sans Telugu UI Light
  * Noto Sans Telugu UI Medium
  * Noto Sans Telugu UI SemiBold
  * Noto Sans Telugu UI SemiCondensed
  * Noto Sans Telugu UI SemiCondensed Black
  * Noto Sans Telugu UI SemiCondensed ExtraBold
  * Noto Sans Telugu UI SemiCondensed ExtraLight
  * Noto Sans Telugu UI SemiCondensed Light
  * Noto Sans Telugu UI SemiCondensed Medium
  * Noto Sans Telugu UI SemiCondensed SemiBold
  * Noto Sans Telugu UI SemiCondensed Thin
  * Noto Sans Telugu UI Thin
  * Noto Sans Thai UI Blk
  * Noto Sans Thai UI Cond
  * Noto Sans Thai UI Cond Blk
  * Noto Sans Thai UI Cond ExtBd
  * Noto Sans Thai UI Cond ExtLt
  * Noto Sans Thai UI Cond Light
  * Noto Sans Thai UI Cond Med
  * Noto Sans Thai UI Cond SemBd
  * Noto Sans Thai UI Cond Thin
  * Noto Sans Thai UI ExtBd
  * Noto Sans Thai UI ExtCond
  * Noto Sans Thai UI ExtCond Blk
  * Noto Sans Thai UI ExtCond ExtBd
  * Noto Sans Thai UI ExtCond ExtLt
  * Noto Sans Thai UI ExtCond Light
  * Noto Sans Thai UI ExtCond Med
  * Noto Sans Thai UI ExtCond SemBd
  * Noto Sans Thai UI ExtCond Thin
  * Noto Sans Thai UI ExtLt
  * Noto Sans Thai UI Light
  * Noto Sans Thai UI Med
  * Noto Sans Thai UI SemBd
  * Noto Sans Thai UI SemCond
  * Noto Sans Thai UI SemCond Blk
  * Noto Sans Thai UI SemCond ExtBd
  * Noto Sans Thai UI SemCond ExtLt
  * Noto Sans Thai UI SemCond Light
  * Noto Sans Thai UI SemCond Med
  * Noto Sans Thai UI SemCond SemBd
  * Noto Sans Thai UI SemCond Thin
  * Noto Sans Thai UI Thin
 .
 Noto UI fonts are for text display in UI elements
 (e.g. buttons, menus) that have a height limit.
 .
 The name "Noto" is short for "No Tofu",
 describing the aim of covering all living Unicode scripts.
 .
 Tofu (豆腐) is Japanese jargon
 for unicode replacement character "�" (U+FFFD)
 often displayed as replacement for unassigned or unknown characters.
Homepage: https://www.google.com/get/noto/

Package: fonts-noto-unhinted
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 35
Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: fonts-noto
Version: 20201225-1
Enhances: fonts-croscore, fonts-noto-core, fonts-noto-extra, fonts-noto-mono
Description: "No Tofu" font families with large Unicode coverage (unhinted)
 Noto is a collection of font families,
 each visually harmonized across scripts.
 .
 This package contains Noto font families which lacks hinting:
 .
 [ currently this package is empty: all Noto families has hinting ]
 .
 The name "Noto" is short for "No Tofu",
 describing the aim of covering all living Unicode scripts
 (currently 65 are covered, at least partly.
 .
 Tofu (豆腐) is Japanese jargon
 for unicode replacement character "�" (U+FFFD)
 often displayed as replacement for unassigned or unknown characters.
Homepage: https://www.google.com/get/noto/

Package: fonts-ubuntu
Status: install ok installed
Priority: optional
Section: non-free/fonts
Installed-Size: 4339
Maintainer: Debian Fonts Task Force <pkg-fonts-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.83-6
Description: sans-serif font set from Ubuntu
 The Ubuntu Font Family is a set of contemporary sans-serif fonts developed
 between 2010-2011. Dalton Maag performed the font design work and
 implementation with funding from Canonical. The fonts have been the default
 fonts for Ubuntu since 2010.
Homepage: https://design.ubuntu.com/font/

Package: fonts-urw-base35
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 15558
Maintainer: Debian Fonts Task Force <debian-fonts@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 20200910-7
Replaces: gsfonts (<< 2:20200910-2~), gsfonts-x11 (<< 2:20200910-2~)
Depends: xfonts-utils
Suggests: fonts-freefont-otf | fonts-freefont-ttf, fonts-texgyre
Breaks: gsfonts (<< 2:20200910-2~), gsfonts-x11 (<< 2:20200910-2~)
Conffiles:
 /etc/X11/fonts/Type1/fonts-urw-base35.alias 32ee9a005b7c7a089bdd5a5c4ee19c89
 /etc/X11/fonts/Type1/fonts-urw-base35.scale 1027533ffa7574e6b30b528d72287445
 /etc/ghostscript/fontmap.d/10fonts-urw-base35.conf a97fb8d980202e59cc253c9c21bb2d30
Description: font set metric-compatible with the 35 PostScript Level 2 Base Fonts
 A commercial-quality set of PostScript Type 1 fonts, metric-compatible
 with the 35 PostScript Language Level 2 Base Fonts. This package contains
 outlines in .t1 format and metrics in .afm format of the following fonts:
 .
  C059
  D050000L
  Nimbus Mono PS
  Nimbus Roman
  Nimbus Sans
  Nimbus Sans Narrow
  P052
  Standard Symbols PS
  URW Bookman
  URW Gothic
  Z003
 .
 This package also makes the fonts available to an X server under both
 their "urw" names and via fonts.alias under the official "adobe" names.
 .
 Extensive remakes of these fonts in the OpenType format are available in the
 GUST TeX Gyre collection in the fonts-texgyre package. The Cyrillic glyphs
 added to the now obsolete urwcyr fork of these fonts have been merged into
 the GNU FreeFont collection available in the fonts-freefont-otf or
 fonts-freefont-ttf packages.
Homepage: https://github.com/ArtifexSoftware/urw-base35-fonts

Package: fuse3
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 100
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Version: 3.14.0-4
Replaces: fuse
Provides: fuse (= 3.14.0-4)
Depends: libc6 (>= 2.34), libfuse3-3 (= 3.14.0-4), adduser, mount (>= 2.19.1), sed (>= 4)
Breaks: fuse
Conffiles:
 /etc/fuse.conf ba9c9667f7df01ae7081d2c05d1d24e6
Description: Filesystem in Userspace (3.x version)
 Filesystem in Userspace (FUSE) is a simple interface for userspace programs to
 export a virtual filesystem to the Linux kernel. It also aims to provide a
 secure method for non privileged users to create and mount their own filesystem
 implementations.
Homepage: https://github.com/libfuse/libfuse/wiki

Package: g++
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 14
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Source: gcc-defaults (1.203)
Version: 4:12.2.0-3
Provides: c++-compiler, g++-x86-64-linux-gnu (= 4:12.2.0-3)
Depends: cpp (= 4:12.2.0-3), gcc (= 4:12.2.0-3), g++-12 (>= 12.2.0-1~), gcc-12 (>= 12.2.0-1~)
Suggests: g++-multilib
Description: GNU C++ compiler
 This is the GNU C++ compiler, a fairly portable optimizing compiler for C++.
 .
 This is a dependency package providing the default GNU C++ compiler.

Package: g++-12
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 36161
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Source: gcc-12
Version: 12.2.0-14+deb12u1
Provides: c++-compiler, c++abi2-dev
Depends: gcc-12-base (= 12.2.0-14+deb12u1), gcc-12 (= 12.2.0-14+deb12u1), libstdc++-12-dev (= 12.2.0-14+deb12u1), libc6 (>= 2.36), libgmp10 (>= 2:6.2.1+dfsg1), libisl23 (>= 0.15), libmpc3 (>= 1.1.0), libmpfr6 (>= 3.1.3), libzstd1 (>= 1.5.2), zlib1g (>= 1:1.1.4)
Suggests: g++-12-multilib, gcc-12-doc (>= 12)
Description: GNU C++ compiler
 This is the GNU C++ compiler, a fairly portable optimizing compiler for C++.
Homepage: http://gcc.gnu.org/

Package: galera-4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2352
Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Architecture: amd64
Version: 26.4.23-0+deb12u1
Replaces: galera-3 (<< 26.4)
Provides: galera4, percona-xtradb-cluster-galera-26, wsrep
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libssl3 (>= 3.0.0), libstdc++6 (>= 11)
Breaks: galera-3 (<< 26.4)
Conflicts: garbd-2, garbd-3, garbd2, garbd3, percona-galera-3, percona-galera-4, percona-xtradb-cluster-galera, percona-xtradb-cluster-galera-2.x, percona-xtradb-cluster-galera-3.x, percona-xtradb-cluster-galera-4.x, percona-xtradb-cluster-garbd-2.x, percona-xtradb-cluster-garbd-3.x
Description: Replication framework for transactional applications
 Galera is a fast synchronous multimaster wsrep provider (replication engine)
 for transactional databases and similar applications. For more information
 about wsrep API see https://github.com/codership/wsrep-API. For a description
 of Galera replication engine see http://galeracluster.com.
 .
 This package contains the Galera library/plugin.
Homepage: https://www.galeracluster.com/

Package: gawk
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 2906
Maintainer: Adrian Bunk <bunk@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1:5.2.1-2
Provides: awk
Pre-Depends: libc6 (>= 2.34), libgmp10 (>= 2:6.2.1+dfsg1), libmpfr6 (>= 3.1.3), libreadline8 (>= 6.0), libsigsegv2 (>= 2.9)
Suggests: gawk-doc
Conffiles:
 /etc/profile.d/gawk.csh b3d9e29a36f945b2065b2f88d18dadaa
 /etc/profile.d/gawk.sh bfc054c0862d0fad98ca641b951c7061
Description: GNU awk, a pattern scanning and processing language
 `awk', a program that you can use to select particular records in a
 file and perform operations upon them.
 .
 Gawk is the GNU Project's implementation of the AWK programming language.
 It conforms to the definition of the language in the POSIX 1003.2 Command
 Language And Utilities Standard. This version in turn is based on the
 description in The AWK Programming Language, by Aho, Kernighan, and
 Weinberger, with the additional features defined in the System V Release
 4 version of UNIX awk. Gawk also provides more recent Bell Labs awk
 extensions, and some GNU-specific extensions.
Homepage: http://www.gnu.org/software/gawk/

Package: gcc
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 47
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Source: gcc-defaults (1.203)
Version: 4:12.2.0-3
Provides: c-compiler, gcc-x86-64-linux-gnu (= 4:12.2.0-3)
Depends: cpp (= 4:12.2.0-3), gcc-12 (>= 12.2.0-1~)
Recommends: libc6-dev | libc-dev
Suggests: gcc-multilib, make, manpages-dev, autoconf, automake, libtool, flex, bison, gdb, gcc-doc
Conflicts: gcc-doc (<< 1:2.95.3)
Description: GNU C compiler
 This is the GNU C compiler, a fairly portable optimizing compiler for C.
 .
 This is a dependency package providing the default GNU C compiler.

Package: gcc-12
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 68236
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Version: 12.2.0-14+deb12u1
Replaces: cpp-12 (<< 7.1.1-8)
Provides: c-compiler
Depends: cpp-12 (= 12.2.0-14+deb12u1), gcc-12-base (= 12.2.0-14+deb12u1), libcc1-0 (>= 12.2.0-14+deb12u1), binutils (>= 2.40), libgcc-12-dev (= 12.2.0-14+deb12u1), libc6 (>= 2.36), libgcc-s1 (>= 3.0), libgmp10 (>= 2:6.2.1+dfsg1), libisl23 (>= 0.15), libmpc3 (>= 1.1.0), libmpfr6 (>= 3.1.3), libstdc++6 (>= 5), libzstd1 (>= 1.5.2), zlib1g (>= 1:1.1.4)
Recommends: libc6-dev (>= 2.23-1~)
Suggests: gcc-12-multilib, gcc-12-doc (>= 12), gcc-12-locales (>= 12)
Description: GNU C compiler
 This is the GNU C compiler, a fairly portable optimizing compiler for C.
Homepage: http://gcc.gnu.org/

Package: gcc-12-base
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 100
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.2.0-14+deb12u1
Breaks: gnat (<< 7)
Description: GCC, the GNU Compiler Collection (base package)
 This package contains files common to all languages and libraries
 contained in the GNU Compiler Collection (GCC).
Homepage: http://gcc.gnu.org/

Package: gdisk
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 885
Maintainer: Jonathan Carter <jcc@debian.org>
Architecture: amd64
Version: 1.0.9-2.1
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libncursesw6 (>= 6), libpopt0 (>= 1.14), libstdc++6 (>= 5.2), libtinfo6 (>= 6), libuuid1 (>= 2.16)
Recommends: groff-base
Description: GPT fdisk text-mode partitioning tool
 GPT fdisk (aka gdisk) is a text-mode partitioning
 tool that provides utilities for Globally Unique
 Identifier (GUID) Partition Table (GPT) disks.
 .
 Features:
 .
  - Edit GUID partition table definitions
  - In place conversion of BSD disklabels to GPT
  - In place conversion of MBR to GPT
  - In place conversion of GPT to MBR
  - Create hybrid MBR/GPT layouts
  - Repair damaged GPT data structures
  - Repair damaged MBR structures
  - Back up GPT data to a file (and restore from file)
Homepage: http://sourceforge.net/projects/gptfdisk/

Package: genisoimage
Status: install ok installed
Priority: optional
Section: otherosfs
Installed-Size: 1658
Maintainer: Joerg Jaspert <joerg@debian.org>
Architecture: amd64
Source: cdrkit
Version: 9:1.1.11-3.4
Replaces: mkisofs
Provides: mkisofs
Depends: libbz2-1.0, libc6 (>= 2.33), libmagic1 (>= 5.12), zlib1g (>= 1:1.1.4)
Suggests: wodim, cdrkit-doc
Conflicts: mkhybrid, mkisofs
Description: Creates ISO-9660 CD-ROM filesystem images
 genisoimage is a pre-mastering program for creating ISO-9660 CD-ROM
 filesystem images, which can then be written to CD or DVD media using
 the wodim program. genisoimage includes support for making bootable
 "El Torito" CDs, as well as CDs with support for the
 Macintosh HFS filesystem.
 .
 The package also includes extra tools useful for working with ISO images:
  * mkzftree - create ISO-9660 image with compressed contents
  * dirsplit - easily separate large directory contents into disks of
    predefined size
  * geteltorito - extract an El Torito boot image from a CD image
 .
 Please install cdrkit-doc if you want most of the documentation and
 README files.

Package: gettext-base
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 645
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gettext
Version: 0.21-12
Depends: libc6 (>= 2.34)
Description: GNU Internationalization utilities for the base system
 This package includes the gettext and ngettext programs which allow
 other packages to internationalize the messages given by shell scripts.
Homepage: https://www.gnu.org/software/gettext/

Package: ghostscript
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 196
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 10.0.0~dfsg-11+deb12u8
Provides: postscript-viewer
Depends: libgs10 (= 10.0.0~dfsg-11+deb12u8), libc6 (>= 2.34)
Description: interpreter for the PostScript language and for PDF
 GPL Ghostscript is used for PostScript/PDF preview and printing.
 Usually as a back-end to a program such as ghostview,
 it can display PostScript and PDF documents in an X11 environment.
 .
 Furthermore, it can render PostScript and PDF files as graphics
 to be printed on non-PostScript printers.
 Supported printers include common dot-matrix, inkjet and laser models.
Homepage: https://www.ghostscript.com/

Package: gir1.2-glib-2.0
Status: install ok installed
Priority: optional
Section: introspection
Installed-Size: 719
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gobject-introspection
Version: 1.74.0-3
Provides: gir1.2-gio-2.0 (= 1.74.0-3), gir1.2-girepository-2.0 (= 1.74.0-3), gir1.2-gmodule-2.0 (= 1.74.0-3), gir1.2-gobject-2.0 (= 1.74.0-3)
Depends: libgirepository-1.0-1 (>= 1.72.0), libglib2.0-0 (>= 2.74.0)
Description: Introspection data for GLib, GObject, Gio and GModule
 GObject Introspection is a project for providing machine readable
 introspection data of the API of C libraries. This introspection
 data can be used in several different use cases, for example
 automatic code generation for bindings, API verification and documentation
 generation.
 .
 GObject Introspection contains tools to generate and handle the
 introspection data.
 .
 This package contains the introspection data for the GLib, GObject,
 GModule and Gio libraries.
Homepage: https://wiki.gnome.org/GObjectIntrospection

Package: gir1.2-nm-1.0
Status: install ok installed
Priority: optional
Section: introspection
Installed-Size: 342
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: network-manager
Version: 1.42.4-1+deb12u1
Depends: gir1.2-glib-2.0, libnm0 (>= 1.42.2)
Description: GObject introspection data for the libnm library
 NetworkManager is a system network service that manages your network devices
 and connections, attempting to keep active network connectivity when
 available. It manages ethernet, Wi-Fi, mobile broadband (WWAN), and PPPoE
 devices, and provides VPN integration with a variety of different VPN
 services.
 .
 This package contains introspection data for NetworkManager using libnm.
 .
 It can be used by packages using the GIRepository format to generate
 dynamic bindings.
Homepage: https://wiki.gnome.org/Projects/NetworkManager

Package: git
Status: install ok installed
Priority: optional
Section: vcs
Installed-Size: 44890
Maintainer: Jonathan Nieder <jrnieder@gmail.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1:2.39.5-0+deb12u3
Provides: git-completion, git-core
Depends: libc6 (>= 2.34), libcurl3-gnutls (>= 7.56.1), libexpat1 (>= 2.0.1), libpcre2-8-0 (>= 10.34), zlib1g (>= 1:1.2.2), perl, liberror-perl, git-man (>> 1:2.39.5), git-man (<< 1:2.39.5-.)
Recommends: ca-certificates, patch, less, ssh-client
Suggests: gettext-base, git-daemon-run | git-daemon-sysvinit, git-doc, git-email, git-gui, gitk, gitweb, git-cvs, git-mediawiki, git-svn
Breaks: bash-completion (<< 1:1.90-1), cogito (<= 0.18.2+), dgit (<< 5.1~), git-buildpackage (<< 0.6.5), git-el (<< 1:2.32.0~rc2-1~), gitosis (<< 0.2+20090917-7), gitpkg (<< 0.15), guilt (<< 0.33), openssh-client (<< 1:6.8), stgit (<< 0.15), stgit-contrib (<< 0.15)
Conffiles:
 /etc/bash_completion.d/git-prompt 7baac5c3ced94ebf2c0e1dde65c3b1a6
Description: fast, scalable, distributed revision control system
 Git is popular version control system designed to handle very large
 projects with speed and efficiency; it is used for many high profile
 open source projects, most notably the Linux kernel.
 .
 Git falls in the category of distributed source code management tools.
 Every Git working directory is a full-fledged repository with full
 revision tracking capabilities, not dependent on network access or a
 central server.
 .
 This package provides the git main components with minimal dependencies.
 Additional functionality, e.g. a graphical user interface and revision
 tree visualizer, tools for interoperating with other VCS's, or a web
 interface, is provided as separate git* packages.
Homepage: https://git-scm.com/

Package: git-man
Status: install ok installed
Priority: optional
Section: doc
Installed-Size: 2107
Maintainer: Jonathan Nieder <jrnieder@gmail.com>
Architecture: all
Multi-Arch: foreign
Source: git
Version: 1:2.39.5-0+deb12u3
Description: fast, scalable, distributed revision control system (manual pages)
 Git is popular version control system designed to handle very large
 projects with speed and efficiency; it is used for many high profile
 open source projects, most notably the Linux kernel.
 .
 Git falls in the category of distributed source code management tools.
 Every Git working directory is a full-fledged repository with full
 revision tracking capabilities, not dependent on network access or a
 central server.
 .
 This package provides reference documentation for use by the 'man'
 utility and the 'git help' command.
Homepage: https://git-scm.com/

Package: gnupg
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 886
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.40-1.1+deb12u2
Replaces: gnupg2 (<< 2.1.11-7+exp1)
Depends: dirmngr (<< 2.2.40-1.1+deb12u2.1~), dirmngr (>= 2.2.40-1.1+deb12u2), gnupg-l10n (= 2.2.40-1.1+deb12u2), gnupg-utils (<< 2.2.40-1.1+deb12u2.1~), gnupg-utils (>= 2.2.40-1.1+deb12u2), gpg (<< 2.2.40-1.1+deb12u2.1~), gpg (>= 2.2.40-1.1+deb12u2), gpg-agent (<< 2.2.40-1.1+deb12u2.1~), gpg-agent (>= 2.2.40-1.1+deb12u2), gpg-wks-client (<< 2.2.40-1.1+deb12u2.1~), gpg-wks-client (>= 2.2.40-1.1+deb12u2), gpg-wks-server (<< 2.2.40-1.1+deb12u2.1~), gpg-wks-server (>= 2.2.40-1.1+deb12u2), gpgsm (<< 2.2.40-1.1+deb12u2.1~), gpgsm (>= 2.2.40-1.1+deb12u2), gpgv (<< 2.2.40-1.1+deb12u2.1~), gpgv (>= 2.2.40-1.1+deb12u2)
Suggests: parcimonie, xloadimage
Breaks: debsig-verify (<< 0.15), dirmngr (<< 2.2.40-1.1+deb12u2), gnupg2 (<< 2.1.11-7+exp1), libgnupg-interface-perl (<< 0.52-3), libgnupg-perl (<= 0.19-1), libmail-gnupg-perl (<= 0.22-1), monkeysphere (<< 0.38~), php-crypt-gpg (<= 1.4.1-1), python-apt (<= 1.1.0~beta4), python-gnupg (<< 0.3.8-3), python3-apt (<= 1.1.0~beta4)
Description: GNU privacy guard - a free PGP replacement
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC4880.
 .
 This package contains the full suite of GnuPG tools for cryptographic
 communications and data storage.
Homepage: https://www.gnupg.org/

Package: gnupg-l10n
Status: install ok installed
Priority: optional
Section: localization
Installed-Size: 4875
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.40-1.1+deb12u2
Replaces: gnupg (<< 2.1.14-2~), gnupg2 (<< 2.1.14-2~)
Breaks: gnupg (<< 2.1.14-2~), gnupg2 (<< 2.1.14-2~)
Enhances: dirmngr, gpg, gpg-agent
Description: GNU privacy guard - localization files
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC 4880.
 .
 This package contains the translation files for the use of GnuPG in
 non-English locales.
Homepage: https://www.gnupg.org/

Package: gnupg-utils
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1837
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.40-1.1+deb12u2
Replaces: gnupg (<< 2.1.21-4), gnupg-agent (<< 2.1.21-4)
Depends: libassuan0 (>= 2.5.0), libbz2-1.0, libc6 (>= 2.34), libgcrypt20 (>= 1.10.0), libgpg-error0 (>= 1.42), libksba8 (>= 1.3.5), libreadline8 (>= 6.0), zlib1g (>= 1:1.1.4)
Recommends: gpg, gpg-agent, gpgconf, gpgsm
Breaks: gnupg (<< 2.1.21-4), gnupg-agent (<< 2.1.21-4)
Description: GNU privacy guard - utility programs
 GnuPG is GNU's tool for secure communication and data storage.
 .
 This package contains several useful utilities for manipulating
 OpenPGP data and other related cryptographic elements.  It includes:
 .
  * addgnupghome -- create .gnupg home directories
  * applygnupgdefaults -- run gpgconf --apply-defaults for all users
  * gpgcompose -- an experimental tool for constructing arbitrary
                  sequences of OpenPGP packets (e.g. for testing)
  * gpgparsemail -- parse an e-mail message into annotated format
  * gpgsplit -- split a sequence of OpenPGP packets into files
  * gpgtar -- encrypt or sign files in an archive
  * kbxutil -- list, export, import Keybox data
  * lspgpot -- convert PGP ownertrust values to GnuPG
  * migrate-pubring-from-classic-gpg -- use only "modern" formats
  * symcryptrun -- use simple symmetric encryption tool in GnuPG framework
  * watchgnupg -- watch socket-based logs
Homepage: https://www.gnupg.org/

Package: gpg
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1582
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.40-1.1+deb12u2
Replaces: gnupg (<< 2.1.21-4)
Depends: gpgconf (= 2.2.40-1.1+deb12u2), libassuan0 (>= 2.5.0), libbz2-1.0, libc6 (>= 2.34), libgcrypt20 (>= 1.10.0), libgpg-error0 (>= 1.42), libreadline8 (>= 6.0), libsqlite3-0 (>= 3.7.15), zlib1g (>= 1:1.1.4)
Recommends: gnupg (= 2.2.40-1.1+deb12u2)
Breaks: gnupg (<< 2.1.21-4)
Description: GNU Privacy Guard -- minimalist public key operations
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC4880.
 .
 This package contains /usr/bin/gpg itself, and is useful on its own
 only for public key operations (encryption, signature verification,
 listing OpenPGP certificates, etc).  If you want full capabilities
 (including secret key operations, network access, etc), please
 install the "gnupg" package, which pulls in the full suite of tools.
Homepage: https://www.gnupg.org/

Package: gpg-agent
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1349
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.40-1.1+deb12u2
Replaces: gnupg-agent (<< 2.1.21-4)
Provides: gnupg-agent
Depends: gpgconf (= 2.2.40-1.1+deb12u2), pinentry-curses | pinentry, init-system-helpers (>= 1.52), libassuan0 (>= 2.5.1), libc6 (>= 2.34), libgcrypt20 (>= 1.10.0), libgpg-error0 (>= 1.42), libnpth0 (>= 0.90)
Recommends: gnupg (= 2.2.40-1.1+deb12u2)
Suggests: dbus-user-session, libpam-systemd, pinentry-gnome3, scdaemon
Breaks: gnupg-agent (<< 2.1.21-4)
Conffiles:
 /etc/X11/Xsession.d/90gpg-agent fbb9ce5e8e4ba5727090f0aa51b61a82
 /etc/logcheck/ignore.d.server/gpg-agent 2d0fbc91a955ba69408ca033d7ae2455
Description: GNU privacy guard - cryptographic agent
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC4880.
 .
 This package contains the agent program gpg-agent which handles all
 secret key material for OpenPGP and S/MIME use.  The agent also
 provides a passphrase cache, which is used by pre-2.1 versions of
 GnuPG for OpenPGP operations.  Without this package, trying to do
 secret-key operations with any part of the modern GnuPG suite will
 fail.
Homepage: https://www.gnupg.org/

Package: gpg-wks-client
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 683
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.40-1.1+deb12u2
Depends: dirmngr (= 2.2.40-1.1+deb12u2), gpg (= 2.2.40-1.1+deb12u2), gpg-agent (= 2.2.40-1.1+deb12u2), libassuan0 (>= 2.5.0), libc6 (>= 2.34), libgcrypt20 (>= 1.10.0), libgpg-error0 (>= 1.42)
Recommends: gnupg (= 2.2.40-1.1+deb12u2)
Description: GNU privacy guard - Web Key Service client
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC4880.
 .
 This package provides the GnuPG client for the Web Key Service
 protocol.
 .
 A Web Key Service is a service that allows users to upload keys per
 mail to be verified over https as described in
 https://tools.ietf.org/html/draft-koch-openpgp-webkey-service
 .
 For more information see: https://wiki.gnupg.org/WKS
Homepage: https://www.gnupg.org/

Package: gpg-wks-server
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 658
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.40-1.1+deb12u2
Depends: gpg (= 2.2.40-1.1+deb12u2), gpg-agent (= 2.2.40-1.1+deb12u2), libc6 (>= 2.34), libgcrypt20 (>= 1.10.0), libgpg-error0 (>= 1.42)
Recommends: gnupg (= 2.2.40-1.1+deb12u2)
Description: GNU privacy guard - Web Key Service server
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC4880.
 .
 This package provides the GnuPG server for the Web Key Service
 protocol.
 .
 A Web Key Service is a service that allows users to upload keys per
 mail to be verified over https as described in
 https://tools.ietf.org/html/draft-koch-openpgp-webkey-service
 .
 For more information see: https://wiki.gnupg.org/WKS
Homepage: https://www.gnupg.org/

Package: gpgconf
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 804
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.40-1.1+deb12u2
Replaces: gnupg (<< 2.1.21-4), gnupg-agent (<< 2.1.21-4)
Depends: libassuan0 (>= 2.5.0), libc6 (>= 2.34), libgcrypt20 (>= 1.10.0), libgpg-error0 (>= 1.42), libreadline8 (>= 6.0)
Breaks: gnupg (<< 2.1.21-4), gnupg-agent (<< 2.1.21-4)
Description: GNU privacy guard - core configuration utilities
 GnuPG is GNU's tool for secure communication and data storage.
 .
 This package contains core utilities used by different tools in the
 suite offered by GnuPG.  It can be used to programmatically edit
 config files for tools in the GnuPG suite, to launch or terminate
 per-user daemons (if installed), etc.
Homepage: https://www.gnupg.org/

Package: gpgsm
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 993
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.40-1.1+deb12u2
Replaces: gnupg2 (<< 2.1.10-2)
Depends: gpgconf (= 2.2.40-1.1+deb12u2), libassuan0 (>= 2.5.0), libc6 (>= 2.34), libgcrypt20 (>= 1.10.0), libgpg-error0 (>= 1.42), libksba8 (>= 1.6.0), libreadline8 (>= 6.0)
Recommends: gnupg (= 2.2.40-1.1+deb12u2)
Breaks: gnupg2 (<< 2.1.10-2)
Description: GNU privacy guard - S/MIME version
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC4880.
 .
 This package contains the gpgsm program. gpgsm is a tool to provide
 digital encryption and signing services on X.509 certificates and the
 CMS protocol. gpgsm includes complete certificate management.
Homepage: https://www.gnupg.org/

Package: gpgv
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 918
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.2.40-1.1+deb12u2
Replaces: gnupg2 (<< 2.0.21-2), gpgv2 (<< 2.1.11-7+exp1)
Depends: libbz2-1.0, libc6 (>= 2.34), libgcrypt20 (>= 1.10.0), libgpg-error0 (>= 1.42), zlib1g (>= 1:1.1.4)
Suggests: gnupg
Breaks: gnupg2 (<< 2.0.21-2), gpgv2 (<< 2.1.11-7+exp1), python-debian (<< 0.1.29)
Description: GNU privacy guard - signature verification tool
 GnuPG is GNU's tool for secure communication and data storage.
 .
 gpgv is actually a stripped-down version of gpg which is only able
 to check signatures. It is somewhat smaller than the fully-blown gpg
 and uses a different (and simpler) way to check that the public keys
 used to make the signature are valid. There are no configuration
 files and only a few options are implemented.
Homepage: https://www.gnupg.org/

Package: grep
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 1245
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 3.8-5
Provides: rgrep
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.34), libpcre2-8-0 (>= 10.32)
Conflicts: rgrep
Description: GNU grep, egrep and fgrep
 'grep' is a utility to search for text in files; it can be used from the
 command line or in scripts.  Even if you don't want to use it, other packages
 on your system probably will.
 .
 The GNU family of grep utilities may be the "fastest grep in the west".
 GNU grep is based on a fast lazy-state deterministic matcher (about
 twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper
 search for a fixed string that eliminates impossible text from being
 considered by the full regexp matcher without necessarily having to
 look at every character. The result is typically many times faster
 than Unix grep or egrep. (Regular expressions containing backreferencing
 will run more slowly, however.)
Homepage: https://www.gnu.org/software/grep/

Package: groff-base
Status: install ok installed
Priority: important
Section: text
Installed-Size: 3673
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: groff
Version: 1.22.4-10
Depends: libc6 (>= 2.35), libgcc-s1 (>= 4.0), libstdc++6 (>= 4.1.1), libuchardet0 (>= 0.0.1)
Suggests: groff
Conffiles:
 /etc/groff/man.local c8d6e2bf36a23e2e9599f7f66ab05463
 /etc/groff/mdoc.local 4bc6267468942826b757fa2f868c8237
Description: GNU troff text-formatting system (base system components)
 This package contains the traditional UN*X text formatting tools
 troff, nroff, tbl, eqn, and pic. These utilities, together with the
 man-db package, are essential for displaying the on-line manual pages.
 .
 groff-base is a stripped-down package containing the necessary components
 to read manual pages in ASCII, Latin-1, and UTF-8, plus the PostScript
 device (groff's default). Users who want a full groff installation, with
 the standard set of devices, fonts, macros, and documentation, should
 install the groff package.
Homepage: https://www.gnu.org/software/groff/

Package: grub-cloud-amd64
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 14
Maintainer: Debian Cloud Team <debian-cloud@lists.debian.org>
Architecture: amd64
Source: grub-cloud
Version: 0.0.5
Depends: grub2-common (>= 2.02+dfsg1-7), grub-efi-amd64-bin, grub-efi-amd64-signed, grub-pc-bin, shim-signed
Conffiles:
 /etc/default/grub 9a6c811fa6de76571ef91cd274b19cc7
Description: GRand Unified Bootloader (cloud setup)
 This package contains the cloud image setup of GRUB and installs GRUB for the
 PC/BIOS and the EFI-AMD64 architecture.
 .
 You don't want to use this package outside of cloud images.

Package: grub-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 17824
Maintainer: GRUB Maintainers <pkg-grub-devel@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: foreign
Source: grub2
Version: 2.06-13+deb12u2
Replaces: grub-coreboot (<< 2.00-4), grub-efi (<< 1.99-1), grub-efi-amd64 (<< 2.00-4), grub-efi-ia32 (<< 2.00-4), grub-efi-ia64 (<< 2.00-4), grub-ieee1275 (<< 2.00-4), grub-linuxbios (<< 1.96+20080831-1), grub-pc (<< 2.00-4), grub-yeeloong (<< 2.00-4), init-select
Depends: libc6 (>= 2.34), libdevmapper1.02.1 (>= 2:1.02.36), libefiboot1 (>= 37), libefivar1 (>= 37), libfreetype6 (>= 2.2.1), libfuse2 (>= 2.8.4-1.4), liblzma5 (>= 5.1.1alpha+20120614), gettext-base
Recommends: os-prober (>= 1.33)
Suggests: multiboot-doc, grub-emu, mtools, xorriso (>= 0.5.6.pl00), desktop-base (>= 4.0.6), console-setup
Breaks: apport (<< 2.1.1), friendly-recovery (<< 0.2.13), lupin-support (<< 0.55), mdadm (<< 2.6.7-2)
Conflicts: init-select
Conffiles:
 /etc/default/grub.d/init-select.cfg 86dea2a78312ca80f740098987d9c0fb
 /etc/grub.d/00_header cd52708cba4d78d7ef96176258d4593d
 /etc/grub.d/05_debian_theme 7af00bf2d834b3104688c9cbf40b23b3
 /etc/grub.d/10_linux 16adfed0ec58a4db1e3f3f38e49f06fc
 /etc/grub.d/20_linux_xen 80253021369176084e3483b13c9e689e
 /etc/grub.d/30_os-prober e5c89c9c421bbe7c2ad9eb86129fd4e0
 /etc/grub.d/30_uefi-firmware ed41aff510f9176cdbbecfe1a964e4c5
 /etc/grub.d/40_custom babe7de352fe18de5a238569cf4b8a11
 /etc/grub.d/41_custom 1d876baff8ca3841aa6ba057e881a2e4
 /etc/grub.d/README be58f42dfe74feb6eeb98c6a843c743f
Description: GRand Unified Bootloader (common files)
 This package contains common files shared by the distinct flavours of GRUB.
 It is shared between GRUB Legacy and GRUB 2, although a number of files
 specific to GRUB 2 are here as long as they do not break GRUB Legacy.
 .
 grub-mkrescue needs the suggested packages mtools (for UEFI targets) and
 xorriso.
Homepage: https://www.gnu.org/software/grub/

Package: grub-efi-amd64-bin
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 18169
Maintainer: GRUB Maintainers <pkg-grub-devel@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: foreign
Source: grub2
Version: 2.06-13+deb12u2
Replaces: grub-common (<= 1.97~beta2-1), grub-efi-amd64 (<< 1.99-1), grub2 (<< 2.06-13+deb12u2)
Depends: grub-common (= 2.06-13+deb12u2)
Recommends: grub-efi-amd64-signed, efibootmgr
Description: GRand Unified Bootloader, version 2 (EFI-AMD64 modules)
 GRUB is a portable, powerful bootloader.  This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
  - Scripting in grub.cfg using BASH-like syntax.
  - Support for modern partition maps such as GPT.
  - Modular generation of grub.cfg via update-grub.  Packages providing GRUB
    add-ons can plug in their own script rules and trigger updates by invoking
    update-grub.
 .
 This package contains GRUB modules that have been built for use with the
 EFI-AMD64 architecture, as used by Intel Macs (unless a BIOS interface has
 been activated).  It can be installed in parallel with other flavours, but
 will not automatically install GRUB as the active boot loader nor
 automatically update grub.cfg on upgrade unless grub-efi-amd64 is also
 installed.
Homepage: https://www.gnu.org/software/grub/
Efi-Vendor: debian

Package: grub-efi-amd64-signed
Protected: yes
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 15356
Maintainer: GRUB Maintainers <pkg-grub-devel@alioth-lists.debian.net>
Architecture: amd64
Version: 1+2.06+13+deb12u2
Depends: grub-common (>= 2.06-13+deb12u2)
Recommends: shim-signed
Description: GRand Unified Bootloader, version 2 (amd64 UEFI signed by Debian)
 GRUB is a portable, powerful bootloader.  This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
  - Scripting in grub.cfg using BASH-like syntax.
  - Support for modern partition maps such as GPT.
  - Modular generation of grub.cfg via update-grub.  Packages providing GRUB
    add-ons can plug in their own script rules and trigger updates by invoking
    update-grub.
 .
 This package contains the binaries signed by the Debian UEFI CA to be used by
 shim-signed.
Built-Using: grub2 (= 2.06-13+deb12u2)

Package: grub-pc-bin
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 3119
Maintainer: GRUB Maintainers <pkg-grub-devel@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: foreign
Source: grub2
Version: 2.06-13+deb12u2
Replaces: grub-common (<= 1.97~beta2-1), grub-pc (<< 1.99-1), grub2 (<< 2.06-13+deb12u2)
Depends: libc6 (>= 2.34), libdevmapper1.02.1 (>= 2:1.02.36), grub-common (= 2.06-13+deb12u2)
Suggests: desktop-base (>= 4.0.6)
Description: GRand Unified Bootloader, version 2 (PC/BIOS modules)
 GRUB is a portable, powerful bootloader.  This version of GRUB is based on a
 cleaner design than its predecessors, and provides the following new features:
 .
  - Scripting in grub.cfg using BASH-like syntax.
  - Support for modern partition maps such as GPT.
  - Modular generation of grub.cfg via update-grub.  Packages providing GRUB
    add-ons can plug in their own script rules and trigger updates by invoking
    update-grub.
  - VESA-based graphical mode with background image support and complete 24-bit
    color set.
  - Support for extended charsets.  Users can write UTF-8 text to their menu
    entries.
 .
 This package contains GRUB modules that have been built for use with the
 traditional PC/BIOS architecture.  It can be installed in parallel with
 other flavours, but will not automatically install GRUB as the active boot
 loader nor automatically update grub.cfg on upgrade unless grub-pc is also
 installed.
Homepage: https://www.gnu.org/software/grub/

Package: grub2-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1353
Maintainer: GRUB Maintainers <pkg-grub-devel@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: foreign
Source: grub2
Version: 2.06-13+deb12u2
Replaces: grub, grub-cloud-amd64 (<< 0.0.4), grub-common (<< 1.99-1), grub-coreboot (<< 2.02+dfsg1-7), grub-doc (<< 0.97-32), grub-efi-amd64 (<< 2.02+dfsg1-7), grub-efi-arm (<< 2.02+dfsg1-7), grub-efi-arm64 (<< 2.02+dfsg1-7), grub-efi-ia32 (<< 2.02+dfsg1-7), grub-efi-ia64 (<< 2.02+dfsg1-7), grub-ieee1275 (<< 2.02+dfsg1-7), grub-legacy, grub-legacy-doc (<< 0.97-59), grub-pc (<< 2.02+dfsg1-7), grub-uboot (<< 2.02+dfsg1-7), grub-xen (<< 2.02+dfsg1-7), grub-yeeloong (<< 2.02+dfsg1-7)
Depends: grub-common (= 2.06-13+deb12u2), dpkg (>= 1.15.4), libc6 (>= 2.34), libdevmapper1.02.1 (>= 2:1.02.36), libefiboot1 (>= 37), libefivar1 (>= 37), liblzma5 (>= 5.1.1alpha+20120614)
Breaks: grub (<< 0.97-54), grub-cloud-amd64 (<< 0.0.4), grub-coreboot (<< 2.02+dfsg1-7), grub-doc (<< 0.97-32), grub-efi-amd64 (<< 2.02+dfsg1-7), grub-efi-arm (<< 2.02+dfsg1-7), grub-efi-arm64 (<< 2.02+dfsg1-7), grub-efi-ia32 (<< 2.02+dfsg1-7), grub-efi-ia64 (<< 2.02+dfsg1-7), grub-ieee1275 (<< 2.02+dfsg1-7), grub-legacy-doc (<< 0.97-59), grub-pc (<< 2.02+dfsg1-7), grub-uboot (<< 2.02+dfsg1-7), grub-xen (<< 2.02+dfsg1-7), grub-yeeloong (<< 2.02+dfsg1-7), shim (<< 0.9+1474479173.6c180c6-0ubuntu1~)
Conflicts: grub-legacy
Conffiles:
 /etc/kernel/postinst.d/zz-update-grub 5a98abefbfe97dbed36db7899251e433
 /etc/kernel/postrm.d/zz-update-grub 5a98abefbfe97dbed36db7899251e433
Description: GRand Unified Bootloader (common files for version 2)
 This package contains common files shared by the distinct flavours of GRUB.
 The files in this package are specific to GRUB 2, and would break GRUB
 Legacy if installed on the same system.
Homepage: https://www.gnu.org/software/grub/

Package: gsfonts
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 64
Maintainer: Debian Fonts Task Force <debian-fonts@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: fonts-urw-base35 (20200910-7)
Version: 2:20200910-7
Depends: fonts-urw-base35 (>= 20200910-2~)
Breaks: grace (<= 1:5.1.25-12)
Description: transitional dummy package (gsfonts -> fonts-urw-base35)
 This package is a dummy package to enable the gsfonts to fonts-urw-base35
 transition. It can be safely removed.
Homepage: https://github.com/ArtifexSoftware/urw-base35-fonts

Package: gzip
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 252
Maintainer: Milan Kupcevic <milan@debian.org>
Architecture: amd64
Version: 1.12-1
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.33)
Suggests: less
Description: GNU compression utilities
 This package provides the standard GNU file compression utilities, which
 are also the default compression tools for Debian.  They typically operate
 on files with names ending in '.gz', but can also decompress files ending
 in '.Z' created with 'compress'.
Homepage: https://www.gnu.org/software/gzip/

Package: heif-gdk-pixbuf
Status: install ok installed
Priority: optional
Section: graphics
Installed-Size: 36
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libheif
Version: 1.15.1-1+deb12u1
Depends: libheif1 (= 1.15.1-1+deb12u1), libc6 (>= 2.4), libgdk-pixbuf-2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.12.0)
Description: ISO/IEC 23008-12:2017 HEIF file format decoder - gdk-pixbuf loader
 libheif is an ISO/IEC 23008-12:2017 HEIF file format decoder. HEIF is a new
 image file format employing HEVC (h.265) image coding for the best compression
 ratios currently possible.
 .
 A gdk-pixbuf loader module for applications such as "gpicview" and "pcmanfm"
 is provided by this package.
Homepage: http://www.libheif.org

Package: hicolor-icon-theme
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 441
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.17-2
Description: default fallback theme for FreeDesktop.org icon themes
 This is the default fallback theme used by implementations of the
 Freedesktop.org Icon Theme specification.

Package: hostname
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 46
Maintainer: Michael Meskes <meskes@debian.org>
Architecture: amd64
Version: 3.23+nmu1
Replaces: nis (<< 3.17-30)
Pre-Depends: libc6 (>= 2.34)
Breaks: nis (<< 3.17-30)
Description: utility to set/show the host name or domain name
 This package provides commands which can be used to display the system's
 DNS name, and to display or set its hostname or NIS domain name.

Package: htop
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 378
Maintainer: Daniel Lange <DLange@debian.org>
Architecture: amd64
Version: 3.2.2-2
Depends: libc6 (>= 2.34), libncursesw6 (>= 6), libnl-3-200 (>= 3.2.7), libnl-genl-3-200 (>= 3.2.7), libtinfo6 (>= 6)
Suggests: lm-sensors, lsof, strace
Description: interactive processes viewer
 Htop is an ncursed-based process viewer similar to top, but it
 allows one to scroll the list vertically and horizontally to see
 all processes and their full command lines.
 .
 Tasks related to processes (killing, renicing) can be done without
 entering their PIDs.
Homepage: https://htop.dev/

Package: i965-va-driver
Status: install ok installed
Priority: optional
Section: video
Installed-Size: 1752
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: intel-vaapi-driver
Version: 2.4.1+dfsg1-1
Provides: va-driver
Depends: libva-driver-abi-1.8, libc6 (>= 2.29), libdrm-intel1 (>= 2.4.46), libdrm2 (>= 2.3.1)
Suggests: i965-va-driver-shaders
Enhances: libva2
Description: VAAPI driver for Intel G45 & HD Graphics family
 The VA-API (Video Acceleration API) enables hardware accelerated video
 decode/encode at various entry-points (VLD, IDCT, Motion Compensation
 etc.) for the prevailing coding standards today (MPEG-2, MPEG-4
 ASP/H.263, MPEG-4 AVC/H.264, and VC-1/WMV3). It provides an interface
 to fully expose the video decode capabilities in today's GPUs.
 .
 This package contains the video decode and encode driver backend for the
 Intel G45 chipsets and Intel HD Graphics for the Intel Core processor family.
 The supported platforms include:
  * Cantiga, Intel GMA 4500MHD (GM45)
  * Ironlake, Intel HD Graphics for 2010 Intel Core processor family
  * Sandy Bridge, Intel HD Graphics for 2011 Intel Core processor family
  * Ivy Bridge
  * Haswell
  * Broadwell
  * Skylake
  * Kaby Lake
  * Coffee Lake
  * Cannon Lake
Homepage: https://01.org/linuxmedia/vaapi

Package: icu-devtools
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 717
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: icu
Version: 72.1-3+deb12u1
Replaces: icu-tools (<< 72.1~rc-1~), libicu-dev (<< 72.1-3+deb12u1)
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libicu72 (>= 72.1~rc-1~), libstdc++6 (>= 11)
Breaks: icu-tools (<< 72.1~rc-1~), libicu-dev (<< 72.1-3+deb12u1)
Description: Development utilities for International Components for Unicode
 ICU is a C++ and C library that provides robust and full-featured
 Unicode and locale support. This package contains programs used to
 manipulate data files found in the ICU sources and is a dependency of
 libicu-dev.  End users would generally not need to install this package.
Homepage: https://icu.unicode.org/

Package: imagemagick
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 185
Maintainer: ImageMagick Packaging Team <pkg-gmagick-im-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 8:6.9.11.60+dfsg-1.6+deb12u13
Depends: imagemagick-6.q16 (>= 8:6.9.2.10+dfsg-2~)
Description: image manipulation programs -- binaries
 ImageMagick is a software suite to create, edit, and compose bitmap images.
 It can read, convert and write images in a variety of formats (over 100)
 including DPX, EXR, GIF, JPEG, JPEG-2000, PDF, PhotoCD, PNG, Postscript,
 SVG, and TIFF. Use ImageMagick to translate, flip, mirror, rotate, scale,
 shear and transform images, adjust image colors, apply various special
 effects, or draw text, lines, polygons, ellipses and Bézier curves.
 All manipulations can be achieved through shell commands as well as through
 an X11 graphical interface (display).
 .
 This package include links to channel depth specific binaries and manual
 pages.
 .
 This is a dummy package.  You can safely purge or remove it.
Homepage: https://www.imagemagick.org/

Package: imagemagick-6-common
Status: install ok installed
Priority: optional
Section: graphics
Installed-Size: 545
Maintainer: ImageMagick Packaging Team <pkg-gmagick-im-team@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: imagemagick
Version: 8:6.9.11.60+dfsg-1.6+deb12u13
Replaces: imagemagick-common (<< 8:6.9.2.10+dfsg-1~), libmagickcore-6.q16 (<< 8:6.9.6.2+dfsg-3~)
Provides: imagemagick-common
Breaks: imagemagick-common (<< 8:6.9.2.10+dfsg-1~), libmagickcore-6.q16-2 (<< 8:6.9.6.2+dfsg-3~), libmagickcore-6.q16-3 (<< 8:6.9.6.8+dfsg-1~), libmagickcore-6.q16-4 (<< 8:6.9.8.9+dfsg-1~), libmagickcore-6.q16hdri-4 (<< 8:6.9.8.9+dfsg-1~)
Conffiles:
 /etc/ImageMagick-6/coder.xml 2cd28d60bb45db29bba17f35dc58ccb9
 /etc/ImageMagick-6/colors.xml 7a58fb76b799bf829c55eecd08db28c2
 /etc/ImageMagick-6/delegates.xml 00f88a4ce8130b4dd764e8926289b26a
 /etc/ImageMagick-6/log.xml 29c0a0702c3729fec215ce53438eb608
 /etc/ImageMagick-6/magic.xml 04b219d820811a6cb1bc7af03b52b626
 /etc/ImageMagick-6/mime.xml a0c1c972c13db8986951e0016f5be31b
 /etc/ImageMagick-6/policy.xml ac16a7083b092130e93334bbd077e50c
 /etc/ImageMagick-6/quantization-table.xml 948aa1faac66b697266eaa55e8a052e5
 /etc/ImageMagick-6/thresholds.xml 99375e73d2a9a3acca91bf1011d15656
 /etc/ImageMagick-6/type-apple.xml 94aac3cbd6fdb6ccf338e8e60c3a6fcc
 /etc/ImageMagick-6/type-dejavu.xml 2914462b5aec3bf19f4f706c018e904f
 /etc/ImageMagick-6/type-ghostscript.xml 76f2f31af66d562422aa56095cf67284
 /etc/ImageMagick-6/type-urw-base35.xml 0cbc7447c3b14e3a26025cf0bec201f7
 /etc/ImageMagick-6/type-windows.xml 3a8000b7f83d4108e7c3024c1bcc403c
 /etc/ImageMagick-6/type.xml a355c73d6843b2bfb5b5d7bb9cf2a5de
Description: image manipulation programs -- infrastructure
 imagemagick-common contains the filesystem infrastructure required for
 further installation of imagemagick in any configuration; it does not provide
 a full installation of binaries, libraries, and utilities
 required to run imagemagick.
 .
 This package is independent of channel depth.
Homepage: https://www.imagemagick.org/

Package: imagemagick-6.q16
Status: install ok installed
Priority: optional
Section: graphics
Installed-Size: 625
Maintainer: ImageMagick Packaging Team <pkg-gmagick-im-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: imagemagick
Version: 8:6.9.11.60+dfsg-1.6+deb12u13
Replaces: imagemagick (<< 8:6.9.2.10+dfsg-2~)
Provides: imagemagick, imagemagick-6.defaultquantum
Depends: libc6 (>= 2.34), libmagickcore-6.q16-6 (>= 8:6.9.10.2), libmagickwand-6.q16-6 (>= 8:6.9.10.2), hicolor-icon-theme
Recommends: libmagickcore-6.q16-6-extra, ghostscript, netpbm
Suggests: imagemagick-doc, autotrace, cups-bsd | lpr | lprng, curl, enscript, ffmpeg, gimp, gnuplot, grads, graphviz, groff-base, hp2xx, html2ps, libwmf-bin, mplayer, povray, radiance, sane-utils, texlive-base-bin, transfig, ufraw-batch, xdg-utils
Breaks: libmagickcore-dev (<< 8:6.9.2.10+dfsg-2~)
Description: image manipulation programs -- quantum depth Q16
 ImageMagick is a software suite to create, edit, and compose bitmap images.
 It can read, convert and write images in a variety of formats (over 100)
 including DPX, EXR, GIF, JPEG, JPEG-2000, PDF, PhotoCD, PNG, Postscript,
 SVG, and TIFF. Use ImageMagick to translate, flip, mirror, rotate, scale,
 shear and transform images, adjust image colors, apply various special
 effects, or draw text, lines, polygons, ellipses and Bézier curves.
 All manipulations can be achieved through shell commands as well as through
 an X11 graphical interface (display).
 .
 For working with the SVG, WMF, OpenEXR, DjVu and Graphviz formats,
 you need to install the libmagickcore-6.q16-6-extra package.
 .
 This version of imagemagick is compiled for a channel
 depth of 16 bits (Q16).
Homepage: https://www.imagemagick.org/

Package: init
Status: install ok installed
Priority: important
Section: metapackages
Installed-Size: 13
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: init-system-helpers
Version: 1.65.2+deb12u1
Pre-Depends: systemd-sysv | sysvinit-core
Description: metapackage ensuring an init system is installed
 This package is a metapackage which allows you to select from the available
 init systems while ensuring that one of these is available on the system at
 all times.
Important: yes

Package: init-system-helpers
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 133
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.65.2+deb12u1
Depends: usrmerge | usr-is-merged
Description: helper tools for all init systems
 This package contains helper tools that are necessary for switching between
 the various init systems that Debian contains (e. g. sysvinit or
 systemd). An example is deb-systemd-helper, a script that enables systemd unit
 files without depending on a running systemd.
 .
 It also includes the "service", "invoke-rc.d", and "update-rc.d" scripts which
 provide an abstraction for enabling, disabling, starting, and stopping
 services for all supported Debian init systems as specified by the policy.
 .
 While this package is maintained by pkg-systemd-maintainers, it is NOT
 specific to systemd at all. Maintainers of other init systems are welcome to
 include their helpers in this package.

Package: initramfs-tools
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 58
Maintainer: Debian kernel team <debian-kernel@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.142+deb12u3
Provides: linux-initramfs-tool
Depends: initramfs-tools-core (= 0.142+deb12u3), linux-base
Suggests: bash-completion
Breaks: e2fsprogs (<< 1.42.13), initscripts (<< 2.88dsf-59.3~), upstart
Conflicts: linux-initramfs-tool, usplash (<< 0.5.50)
Conffiles:
 /etc/initramfs-tools/update-initramfs.conf e2026d4603e7161efaccca519aeb1297
 /etc/kernel/postinst.d/initramfs-tools c1cb0e052a2cdeef4f3257585c83c58d
 /etc/kernel/postrm.d/initramfs-tools e7471d253a5b24e2fd85b40be4e43218
Description: generic modular initramfs generator (automation)
 This package builds a bootable initramfs for Linux kernel packages.  The
 initramfs is loaded along with the kernel and is responsible for
 mounting the root filesystem and starting the main init system.

Package: initramfs-tools-core
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 161
Maintainer: Debian kernel team <debian-kernel@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: initramfs-tools
Version: 0.142+deb12u3
Replaces: initramfs-tools (<< 0.121~)
Depends: klibc-utils (>= 2.0.4-8~), cpio (>= 2.12), kmod, udev, coreutils (>= 8.24), logsave | e2fsprogs (<< 1.45.3-1~)
Recommends: busybox (>= 1:1.22.0-17~) | busybox-static (>= 1:1.22.0-17~), zstd
Suggests: bash-completion
Breaks: busybox (<< 1:1.22.0-17~), busybox-static (<< 1:1.22.0-17~), initramfs-tools (<< 0.121~)
Conffiles:
 /etc/initramfs-tools/initramfs.conf 7cd32817dcb81991da2e2a928a32fdb0
Description: generic modular initramfs generator (core tools)
 This package contains the mkinitramfs program that can be used to
 create a bootable initramfs for a Linux kernel.  The initramfs should
 be loaded along with the kernel and is then responsible for mounting
 the root filesystem and starting the main init system.

Package: inotify-tools
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 160
Maintainer: Joao Eriberto Mota Filho <eriberto@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 3.22.6.0-4
Depends: libc6 (>= 2.34), libinotifytools0 (>= 3.22.1.0)
Description: command-line programs providing a simple interface to inotify
 inotify (inode notify) is a Linux kernel subsystem that monitors events in
 filesystems and reports those events to applications in real time via API.
 .
 inotify can be used to monitor individual files or directories. When a
 directory is monitored, inotify will return events for the directory itself
 and for files inside the directory.
 .
 inotify-tools is a set of command-line programs for Linux providing a simple
 interface to inotify. These programs can be used to monitor and act upon
 filesystem events. inotify-tools consists of four utilities: inotifywait,
 inotifywatch, fsnotifywait and fsnotifywatch.
 .
 inotifywait efficiently waits for changes to files, making it appropriate
 for use in shell scripts.
 .
 inotifywatch collects filesystem usage statistics and outputs counts of each
 inotify event.
 .
 fsnotifywait and fsnotifywatch are similar to inotifywait and inotifywatch,
 but they are using Linux's fanotify(7) interface by default. The fanotify API
 also provides notification and interception of filesystem events. Additional
 capabilities compared to the inotify(7) API include the ability to monitor
 all of the objects in a mounted filesystem, the ability to make access
 permission decisions, and the possibility to read or modify files before
 access by other applications.
 .
 inotify-tools is also useful for security activities in firewall systems or
 to detect changes and injections of new files in webservers by intruders.
Homepage: https://github.com/rvoicilas/inotify-tools/wiki/

Package: intel-media-va-driver
Status: install ok installed
Priority: optional
Section: video
Installed-Size: 14168
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: intel-media-driver
Version: 23.1.1+dfsg1-1
Provides: va-driver
Depends: libva-driver-abi-1.17, libc6 (>= 2.34), libgcc-s1 (>= 3.0), libigdgmm12 (>= 22.3.3+ds1), libstdc++6 (>= 11)
Description: VAAPI driver for the Intel GEN8+ Graphics family
 The VA-API (Video Acceleration API) enables hardware accelerated video
 decode/encode at various entry-points (VLD, IDCT, Motion Compensation
 etc.) for the prevailing coding standards today (MPEG-2, MPEG-4
 ASP/H.263, MPEG-4 AVC/H.264, and VC-1/WMV3). It provides an interface
 to fully expose the video decode capabilities in today's GPUs.
 .
 This package contains the video decode and encode driver backend for
 the Intel HD Graphics of the Intel Core processor family. The supported
 platforms include:
  * Broadwell
  * Skylake
  * Broxton
  * Apollo Lake
  * Kaby Lake
  * Coffee Lake
  * Whiskey Lake
  * Cannon Lake
  * Ice Lake
 .
 Only a limited set of encoders is available via this driver: JPEG
 (Skylake and newer), AVC (Boxton and newer), HEVC and VP9 (Ice Lake and
 newer). Media shaders are only available on Ice Lake and newer.
Homepage: https://github.com/intel/media-driver

Package: iotop
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 106
Maintainer: Paul Wise <pabs@debian.org>
Architecture: amd64
Source: iotop (0.6-42-ga14256a-0.1)
Version: 0.6-42-ga14256a-0.1+b2
Depends: python3 (<< 3.12), python3 (>= 3.11~), python3:any
Description: simple top-like I/O monitor
 iotop does for I/O usage what top(1) does for CPU usage. It watches I/O
 usage information output by the Linux kernel and displays a table of
 current I/O usage by processes on the system. It is handy for answering
 the question "Why is the disk churning so much?".
 .
 iotop can only run under a Linux 2.6.20 or later kernel built with the
 CONFIG_TASKSTATS, CONFIG_TASK_DELAY_ACCT, CONFIG_TASK_IO_ACCOUNTING and
 CONFIG_VM_EVENT_COUNTERS build config options on.
Homepage: http://guichaz.free.fr/iotop/

Package: iproute2
Status: install ok installed
Priority: important
Section: net
Installed-Size: 3516
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 6.1.0-3
Replaces: iproute
Provides: arpd
Depends: debconf (>= 0.5) | debconf-2.0, libbpf1 (>= 1:0.6.0), libbsd0 (>= 0.0), libc6 (>= 2.34), libcap2 (>= 1:2.10), libdb5.3, libelf1 (>= 0.131), libmnl0 (>= 1.0.3-4~), libselinux1 (>= 3.1~), libtirpc3 (>= 1.0.2), libxtables12 (>= 1.6.0+snapshot20161117), libcap2-bin
Recommends: libatm1 (>= 2.4.1-17~)
Suggests: iproute2-doc, python3:any
Conflicts: arpd, iproute (<< 20130000-1)
Conffiles:
 /etc/iproute2/bpf_pinning fd070252e6e9996bd04d9d59e4ce21eb
 /etc/iproute2/ematch_map 0e0f36cafc6a9cf76bc704cfd8f96ece
 /etc/iproute2/group 3aea2c0e0dd75e13a5f8f48f2936915f
 /etc/iproute2/nl_protos 393e42fa549d0974eb66d576675779c2
 /etc/iproute2/rt_dsfield 4c80d267a84d350d89d88774efe48a0f
 /etc/iproute2/rt_protos 35b7f1673d1d0486c4188fd06b46a410
 /etc/iproute2/rt_protos.d/README 88e45597012c565f9a10ffef1bc14312
 /etc/iproute2/rt_realms 7137bdf40e8d58c87ac7e3bba503767f
 /etc/iproute2/rt_scopes 6298b8df09e9bda23ea7da49021ca457
 /etc/iproute2/rt_tables a1313318d6778fe6b8c680248ef5a463
 /etc/iproute2/rt_tables.d/README 18bfdabbd4d5b14eae350720ea5ff431
Description: networking and traffic control tools
 The iproute2 suite is a collection of utilities for networking and
 traffic control.
 .
 These tools communicate with the Linux kernel via the (rt)netlink
 interface, providing advanced features not available through the
 legacy net-tools commands 'ifconfig' and 'route'.
Homepage: https://wiki.linuxfoundation.org/networking/iproute2

Package: ipset
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 138
Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>
Architecture: amd64
Version: 7.17-1
Provides: ipset-7.17
Depends: libc6 (>= 2.34), libipset13 (>= 7.15-1~)
Recommends: iptables
Breaks: xtables-addons-common (<< 1.41~)
Description: administration tool for kernel IP sets
 IP sets are a framework inside the Linux 2.4.x and 2.6.x kernel which can be
 administered by the ipset(8) utility. Depending on the type, currently an
 IP set may store IP addresses, (TCP/UDP) port numbers or IP addresses with
 MAC addresses in a  way which ensures lightning speed when matching an
 entry against a set.
 .
 If you want to
 .
  * store multiple IP addresses or port numbers and match against the
    entire collection using a single iptables rule.
  * dynamically update iptables rules against IP addresses or ports without
    performance penalty.
  * express complex IP address and ports based rulesets with a single
    iptables rule and benefit from the speed of IP sets.
 .
 then IP sets may be the proper tool for you.
Homepage: https://ipset.netfilter.org/

Package: iptables
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 2408
Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.8.9-2
Replaces: iptables-nftables-compat (<< 1.6.2~)
Depends: libip4tc2 (= 1.8.9-2), libip6tc2 (= 1.8.9-2), libxtables12 (= 1.8.9-2), netbase (>= 6.0), libc6 (>= 2.34), libmnl0 (>= 1.0.3-4~), libnetfilter-conntrack3 (>= 1.0.6), libnfnetlink0 (>= 1.0.2), libnftnl11 (>= 1.1.5)
Recommends: nftables
Suggests: firewalld, kmod
Breaks: iptables-nftables-compat (<< 1.6.2~)
Description: administration tools for packet filtering and NAT
 The iptables/xtables framework has been replaced by nftables. You should
 consider migrating now.
 .
 iptables is the userspace command line program used to configure
 the Linux packet filtering and NAT ruleset. It is targeted towards systems
 and networks administrators.
 .
 This package contains several different utilities, the most important ones:
 .
 iptables-nft, iptables-nft-save, iptables-nft-restore (nft-based version)
 .
 iptables-legacy, iptables-legacy-save, iptables-legacy-restore (legacy version)
 .
 ip6tables-nft, ip6tables-nft-save, ip6tables-nft-restore (nft-based version)
 .
 ip6tables-legacy, ip6tables-legacy-save, ip6tables-legacy-restore (legacy
 version)
 .
 arptables-nft, arptables-nft-save, arptables-nft-restore (nft-based version)
 .
 ebtables-nft, ebtables-nft-save, ebtables-nft-restore (nft-based version)
Homepage: https://www.netfilter.org/

Package: iputils-ping
Status: install ok installed
Priority: important
Section: net
Installed-Size: 121
Maintainer: Noah Meyerhans <noahm@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: iputils
Version: 3:20221126-1+deb12u1
Provides: ping
Depends: libcap2-bin, libc6 (>= 2.34), libcap2 (>= 1:2.10), libidn2-0 (>= 0.6)
Description: Tools to test the reachability of network hosts
 The ping command sends ICMP ECHO_REQUEST packets to a host in order to
 test if the host is reachable via the network.
 .
 This package includes a ping6 utility which supports IPv6 network
 connections.
Homepage: https://github.com/iputils/iputils/

Package: isc-dhcp-client
Status: install ok installed
Priority: important
Section: net
Installed-Size: 2857
Maintainer: Debian ISC DHCP Maintainers <isc-dhcp@packages.debian.org>
Architecture: amd64
Source: isc-dhcp
Version: 4.4.3-P1-2
Provides: dhcp-client
Depends: libc6 (>= 2.36), debianutils (>= 2.8.2), iproute2
Recommends: isc-dhcp-common
Suggests: resolvconf, avahi-autoipd, isc-dhcp-client-ddns
Conffiles:
 /etc/apparmor.d/sbin.dhclient 4b18441217660d94d1edd6341e0775d1
 /etc/dhcp/debug 521717b5f9e08db15893d3d062c59aeb
 /etc/dhcp/dhclient-exit-hooks.d/rfc3442-classless-routes 95e21c32fa7f603db75f1dc33db53cf5
 /etc/dhcp/dhclient.conf 649563ef7a61912664a400a5263958a6
Description: DHCP client for automatically obtaining an IP address
 This is the Internet Software Consortium's DHCP client.
 .
 Dynamic Host Configuration Protocol (DHCP) is a protocol like BOOTP
 (actually dhcpd includes much of the functionality of bootpd). It
 gives client machines "leases" for IP addresses and can
 automatically set their network configuration. If your machine
 depends on DHCP (especially likely if it's a workstation on a large
 network, or a laptop, or attached to a cable modem), keep this or
 another DHCP client installed.
 .
 Extra documentation can be found in the package isc-dhcp-common.
 .
 ISC has decided to stop maintaining the client and relay parts of isc-dhcp,
 and they will be removed after the 4.4.3 release, keeping only the server
 component. Please, consider using an alternative for isc-dhcp-client
 (dhclient).
 .
 More information can be found in the ISC official announcement:
 https://www.isc.org/blogs/dhcp-client-relay-eom/
Homepage: http://www.isc.org

Package: klibc-utils
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 569
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: klibc
Version: 2.0.12-1
Depends: libklibc (= 2.0.12-1)
Description: small utilities built with klibc for early boot
 This package contains a collection of programs that are linked
 against klibc. These duplicate some of the functionality of a
 regular Linux toolset, but are typically much smaller than their
 full-function counterparts.  They are intended for inclusion in
 initramfs images and embedded systems.
Homepage: https://git.kernel.org/cgit/libs/klibc/klibc.git

Package: kmod
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 251
Maintainer: Marco d'Itri <md@linux.it>
Architecture: amd64
Multi-Arch: foreign
Version: 30+20221128-1
Depends: libc6 (>= 2.34), liblzma5 (>= 5.1.1alpha+20120614), libssl3 (>= 3.0.0), libzstd1 (>= 1.5.2), libkmod2 (= 30+20221128-1)
Conffiles:
 /etc/init.d/kmod c5df572a7bc622632284b75441ee066e
Description: tools for managing Linux kernel modules
 This package contains a set of programs for loading, inserting, and
 removing kernel modules for Linux.
 It replaces module-init-tools.

Package: less
Status: install ok installed
Priority: important
Section: text
Installed-Size: 313
Maintainer: Milan Kupcevic <milan@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 590-2.1~deb12u2
Depends: libc6 (>= 2.34), libtinfo6 (>= 6)
Description: pager program similar to more
 This package provides "less", a file pager (that is, a memory-efficient
 utility for displaying text one screenful at a time). Less has many
 more features than the basic pager "more". As part of the GNU project,
 it is widely regarded as the standard pager on UNIX-derived systems.
 .
 Also provided are "lessecho", a simple utility for ensuring arguments
 with spaces are correctly quoted; "lesskey", a tool for modifying the
 standard (vi-like) keybindings; and "lesspipe", a filter for specific
 types of input, such as .doc or .txt.gz files.
Homepage: http://www.greenwoodsoftware.com/less/

Package: libaacs0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 145
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libaacs
Version: 0.11.1-2
Depends: libc6 (>= 2.33), libgcrypt20 (>= 1.10.0)
Recommends: libbdplus0
Enhances: libbluray2
Description: free-and-libre implementation of AACS
 libaacs is a research project to implement the Advanced Access Content
 System specification. It provides, through an open-source library, a
 way to understand how the AACS works.
 .
 This package DOES NOT provide any key or certificate that could be used
 to decode encrypted copyrighted material. It is based on the official
 public AACS specification only.
 .
 This package provides the shared library.
Homepage: https://www.videolan.org/developers/libaacs.html

Package: libabsl20220623
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1913
Maintainer: Benjamin Barenblat <bbaren@debian.org>
Architecture: amd64
Multi-Arch: same
Source: abseil
Version: 20220623.1-1+deb12u2
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libstdc++6 (>= 11)
Description: extensions to the C++ standard library
 Abseil is an open-source collection of C++ library code designed to augment the
 C++ standard library. The Abseil library code is collected from Google's C++
 codebase and has been extensively tested and used in production. In some cases,
 Abseil provides pieces missing from the C++ standard; in others, Abseil
 provides alternatives to the standard for special needs.
 .
 This package contains Abseil's shared libraries.
Homepage: https://abseil.io/

Package: libacl1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 73
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: amd64
Multi-Arch: same
Source: acl
Version: 2.3.1-3
Depends: libc6 (>= 2.33)
Description: access control list - shared library
 This package contains the shared library containing the POSIX 1003.1e
 draft standard 17 functions for manipulating access control lists.
Homepage: https://savannah.nongnu.org/projects/acl/

Package: libaio1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 37
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libaio
Version: 0.3.113-4
Depends: libc6 (>= 2.4)
Description: Linux kernel AIO access library - shared library
 This library enables userspace to use Linux kernel asynchronous I/O
 system calls, important for the performance of databases and other
 advanced applications.
 .
 This package contains the shared library.
Homepage: https://pagure.io/libaio

Package: libalgorithm-diff-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 129
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.201-1
Depends: perl:any
Recommends: libalgorithm-diff-xs-perl
Description: module to find differences between files
 Algorithm::Diff is a Perl module that allows users to analyze text based on a
 Longest Common Subsequence (LCS) algorithm. It can compare two files and find
 the differences between them, which can produce the same information as the
 common Unix tool 'diff'.
 .
 There is an XS-optimized implementation of the core loop, which accelerates
 some types of diff output (see libalgorithm-diff-xs-perl).
Homepage: https://metacpan.org/release/Algorithm-Diff

Package: libalgorithm-diff-xs-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 47
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libalgorithm-diff-xs-perl (0.04-8)
Version: 0.04-8+b1
Depends: perl (>= 5.36.0-4), perlapi-5.36.0, libc6 (>= 2.14), libalgorithm-diff-perl
Description: module to find differences between files (XS accelerated)
 Algorithm::Diff::XS is a Perl diff utility module based on Joe Schaefer's
 excellent but not very well-known Algorithm::LCS module, with a drop-in
 interface identical to Algorithm::Diff.
 .
 Note that only the LCSidx function is optimized in XS at the moment, which
 means only compact_diff will get significantly faster for large data sets,
 while diff and sdiff will run in identical speed as Algorithm::Diff.
Homepage: https://metacpan.org/release/Algorithm-Diff-XS

Package: libalgorithm-merge-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 43
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.08-5
Depends: perl:any, libalgorithm-diff-perl
Description: Perl module for three-way merge of textual data
 Algorithm::Merge provides three-way merge and diff functions, complementing
 the functionality offered by Algorithm::Diff (libalgorithm-diff-perl). Given
 three sets of items, known as the original, left and right, this module can
 take a three-way difference or merge them. Taking a difference provides an
 array reference that is very similar to the behaviour of Algorithm::Diff. One
 can also implement custom conflict resolution using the CONFLICT callback.
Homepage: https://metacpan.org/release/Algorithm-Merge

Package: libaom-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 8532
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: aom
Version: 3.6.0-1+deb12u3
Depends: libaom3 (= 3.6.0-1+deb12u3)
Description: AV1 Video Codec Library -- Development Files
 AOMedia Video 1 (AV1) is an open and royalty free video encoding format
 optimized for the Internet and the successor of VP9. aom is the
 reference encoder and decoder implementation published by the Alliance
 for Open Media.
 .
 This package contains the development files.
Homepage: https://aomedia.googlesource.com/aom/

Package: libaom3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 5546
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: aom
Version: 3.6.0-1+deb12u3
Depends: libc6 (>= 2.34)
Description: AV1 Video Codec Library
 AOMedia Video 1 (AV1) is an open and royalty free video encoding format
 optimized for the Internet and the successor of VP9. aom is the
 reference encoder and decoder implementation published by the Alliance
 for Open Media.
 .
 This package contains the shared library.
Homepage: https://aomedia.googlesource.com/aom/

Package: libapache2-mod-php8.2
Status: install ok installed
Priority: optional
Section: httpd
Installed-Size: 5474
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.33-1~deb12u1
Provides: libapache2-mod-php, php-json, php8.2-json, phpapi-20220829
Depends: libmagic1, media-types | mime-support, php8.2-cli, php8.2-common (= 8.2.33-1~deb12u1), php8.2-opcache, tzdata, ucf, apache2-api-20120211, apache2-bin (>= 2.4.16), libargon2-1 (>= 0~20171227), libc6 (>= 2.35), libpcre2-8-0 (>= 10.32), libsodium23 (>= 1.0.18), libssl3 (>= 3.0.0), libxml2 (>= 2.8.0), zlib1g (>= 1:1.1.4)
Recommends: apache2
Suggests: php-pear
Conffiles:
 /etc/apache2/mods-available/php8.2.conf 002a0a2a5863242ae11e2d2d4dfcafe4
 /etc/apache2/mods-available/php8.2.load c68f6273d32f252336bd75585aec958e
Description: server-side, HTML-embedded scripting language (Apache 2 module)
 This package provides the PHP module for the Apache 2 webserver (as
 found in the apache2-mpm-prefork package).  Please note that this package
 ONLY works with Apache's prefork MPM, as it is not compiled thread-safe.
 .
 The following extensions are built in: Core date filter hash json libxml
 openssl pcre random Reflection session sodium SPL standard zlib.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: libapparmor1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 109
Maintainer: Debian AppArmor Team <pkg-apparmor-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: apparmor
Version: 3.0.8-3
Replaces: libapparmor-perl (<< 3.0.3-3)
Depends: libc6 (>= 2.34)
Breaks: libapparmor-perl (<< 3.0.3-3)
Description: changehat AppArmor library
 libapparmor1 provides a shared library one can compile programs
 against in order to use various AppArmor functionality,
 such as transitioning to a different AppArmor profile or hat.
Homepage: https://apparmor.net/

Package: libapr1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 288
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: apr
Version: 1.7.2-3+deb12u1
Depends: libc6 (>= 2.34), libuuid1 (>= 2.16)
Conflicts: libapr1.0
Description: Apache Portable Runtime Library
 APR is Apache's Portable Runtime Library, designed to be a support library
 that provides a predictable and consistent interface to underlying
 platform-specific implementations.
Homepage: https://apr.apache.org/

Package: libaprutil1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 284
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: apr-util
Version: 1.6.3-1+deb12u1
Depends: libapr1 (>= 1.6.2), libc6 (>= 2.25), libcrypt1 (>= 1:4.1.0), libdb5.3, libexpat1 (>= 2.0.1), libgdbm6 (>= 1.16), libssl3 (>= 3.0.0)
Description: Apache Portable Runtime Utility Library
 APR is Apache's Portable Runtime Library, designed to be a support library
 that provides a predictable and consistent interface to underlying
 platform-specific implementations.
 .
 APR Util is a utilities library implemented on top of apr, providing database
 access, xml parsing, and other useful functionality.
Homepage: https://apr.apache.org/

Package: libaprutil1-dbd-sqlite3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 48
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: apr-util
Version: 1.6.3-1+deb12u1
Depends: libaprutil1 (= 1.6.3-1+deb12u1), libc6 (>= 2.4), libsqlite3-0 (>= 3.5.9)
Description: Apache Portable Runtime Utility Library - SQLite3 Driver
 APR is Apache's Portable Runtime Library, designed to be a support library
 that provides a predictable and consistent interface to underlying
 platform-specific implementations.
 .
 APR Util is a utilities library implemented on top of apr, providing database
 access, xml parsing, and other useful functionality.
 .
 This package contains the SQLite3 database driver.
Homepage: https://apr.apache.org/

Package: libaprutil1-ldap
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 40
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: apr-util
Version: 1.6.3-1+deb12u1
Depends: libaprutil1 (= 1.6.3-1+deb12u1), libc6 (>= 2.4), libldap-2.5-0 (>= 2.5.4)
Description: Apache Portable Runtime Utility Library - LDAP Driver
 APR is Apache's Portable Runtime Library, designed to be a support library
 that provides a predictable and consistent interface to underlying
 platform-specific implementations.
 .
 APR Util is a utilities library implemented on top of apr, providing database
 access, xml parsing, and other useful functionality.
 .
 This package contains the LDAP driver.
Homepage: https://apr.apache.org/

Package: libapt-pkg6.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3297
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: apt
Version: 2.6.1
Provides: libapt-pkg (= 2.6.1)
Depends: libbz2-1.0, libc6 (>= 2.34), libgcc-s1 (>= 3.0), libgcrypt20 (>= 1.10.0), liblz4-1 (>= 0.0~r127), liblzma5 (>= 5.1.1alpha+20120614), libstdc++6 (>= 11), libsystemd0 (>= 221), libudev1 (>= 183), libxxhash0 (>= 0.7.1), libzstd1 (>= 1.5.2), zlib1g (>= 1:1.2.2.3)
Recommends: apt (>= 2.6.1)
Breaks: appstream (<< 0.9.0-3~), apt (<< 1.6~), aptitude (<< 0.8.9), dpkg (<< 1.20.8), libapt-inst1.5 (<< 0.9.9~)
Description: package management runtime library
 This library provides the common functionality for searching and
 managing packages as well as information about packages.
 Higher-level package managers can depend upon this library.
 .
 This includes:
  * retrieval of information about packages from multiple sources
  * retrieval of packages and all dependent packages
    needed to satisfy a request either through an internal
    solver or by interfacing with an external one
  * authenticating the sources and validating the retrieved data
  * installation and removal of packages in the system
  * providing different transports to retrieve data over cdrom, ftp,
    http(s), rsh as well as an interface to add more transports like
    tor+http(s) (apt-transport-tor).

Package: libarchive-zip-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 318
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.68-1
Depends: perl:any
Description: Perl module for manipulation of ZIP archives
 The Archive::Zip module allows a Perl program to create, manipulate,
 read, and write Zip archive files.
 .
 Zip archives can be created, or you can read from existing zip files.
 Once created, they can be written to files, streams, or strings.
 .
 Members can be added, removed, extracted, replaced, rearranged, and
 enumerated.  They can also be renamed or have their dates, comments,
 or other attributes queried or modified.  Their data can be
 compressed or uncompressed as needed.  Members can be created from
 members in existing Zip files, or from existing directories, files,
 or strings.
Homepage: https://metacpan.org/release/Archive-Zip

Package: libargon2-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 56
Maintainer: Luca Bruno <lucab@debian.org>
Architecture: amd64
Multi-Arch: same
Source: argon2
Version: 0~20171227-0.3+deb12u1
Depends: libc6 (>= 2.34)
Breaks: cryptsetup-initramfs (<< 2:2.6.1-2)
Description: memory-hard hashing function - runtime library
 Argon2 is a password-hashing function that can be used to hash passwords
 for credential storage, key derivation, or other applications.
 .
 There are two main versions of Argon2: Argon2i and Argon2d.
 Argon2i is the safest against side-channel attacks, while Argon2d provides
 the highest resistance against GPU cracking attacks.
 .
 Argon2i and Argon2d are parametrized by:
  * A time cost, which defines the amount of computation realized and
    therefore the execution time, given in number of iterations
  * A memory cost, which defines the memory usage, given in kibibytes
  * A parallelism degree, which defines the number of parallel threads
 .
 This package includes the dynamic library against which programs are linked.
Homepage: https://github.com/P-H-C/phc-winner-argon2

Package: libasan8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 8017
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.2.0-14+deb12u1
Depends: gcc-12-base (= 12.2.0-14+deb12u1), libc6 (>= 2.34), libgcc-s1 (>= 3.3)
Description: AddressSanitizer -- a fast memory error detector
 AddressSanitizer (ASan) is a fast memory error detector.  It finds
 use-after-free and {heap,stack,global}-buffer overflow bugs in C/C++ programs.
Homepage: http://gcc.gnu.org/

Package: libasound2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1161
Maintainer: Debian ALSA Maintainers <pkg-alsa-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: alsa-lib (1.2.8-1)
Version: 1.2.8-1+b1
Depends: libasound2-data (>= 1.2.8-1), libc6 (>= 2.34)
Suggests: libasound2-plugins (>= 1.0.24)
Breaks: alsa-utils (<< 1.2.1)
Description: shared library for ALSA applications
 This package contains the ALSA library and its standard plugins, as well
 as the required configuration files.
 .
 ALSA is the Advanced Linux Sound Architecture.
Homepage: https://www.alsa-project.org/

Package: libasound2-data
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 200
Maintainer: Debian ALSA Maintainers <pkg-alsa-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: alsa-lib
Version: 1.2.8-1
Replaces: libasound2 (<< 1.2.8-1)
Recommends: alsa-ucm-conf, alsa-topology-conf
Suggests: alsa-utils
Breaks: libasound2 (<< 1.2.8-1)
Description: Configuration files and profiles for ALSA drivers
 This package contains configuration files for ALSA drivers.
 .
 ALSA is the Advanced Linux Sound Architecture.
Homepage: https://www.alsa-project.org/

Package: libass9
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 254
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libass
Version: 1:0.17.1-1+deb12u1
Depends: libc6 (>= 2.29), libfontconfig1 (>= 2.13.0), libfreetype6 (>= 2.3.5), libfribidi0 (>= 1.0.0), libharfbuzz0b (>= 1.2.6)
Description: library for SSA/ASS subtitles rendering
 SubStation Alpha (SSA) is a subtitle file format that allows more
 advanced subtitles than the conventional SRT and similar formats.
 .
 This package contains the shared library for libass.
Homepage: https://github.com/libass/libass

Package: libassuan0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 117
Maintainer: Debian GnuPG-Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libassuan
Version: 2.5.5-5
Depends: libc6 (>= 2.34), libgpg-error0 (>= 1.33)
Description: IPC library for the GnuPG components
 Libassuan is a small library implementing the so-called "Assuan
 protocol". This protocol is used for IPC between most newer GnuPG
 components. Both server and client side functions are provided.
Homepage: https://www.gnupg.org/related_software/libassuan/index.html

Package: libasyncns0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 40
Maintainer: Tanguy Ortolo <tanguy+debian@ortolo.eu>
Architecture: amd64
Multi-Arch: same
Source: libasyncns (0.8-6)
Version: 0.8-6+b3
Depends: libc6 (>= 2.34)
Description: Asynchronous name service query library
 libasyncns is a C library for Linux/Unix for executing name service queries
 asynchronously. It is an asynchronous wrapper around getaddrinfo(3),
 getnameinfo(3), res_query(3) and res_search(3) from libc and libresolv.
Homepage: http://0pointer.de/lennart/projects/libasyncns/

Package: libatomic1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 45
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.2.0-14+deb12u1
Depends: gcc-12-base (= 12.2.0-14+deb12u1), libc6 (>= 2.14)
Description: support library providing __atomic built-in functions
 library providing __atomic built-in functions. When an atomic call cannot
 be turned into lock-free instructions, GCC will make calls into this library.
Homepage: http://gcc.gnu.org/

Package: libattr1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 59
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: amd64
Multi-Arch: same
Source: attr
Version: 1:2.5.1-4
Depends: libc6 (>= 2.4)
Conffiles:
 /etc/xattr.conf 743ca3f83ea263f1f56ad1f63f907bdb
Description: extended attribute handling - shared library
 Contains the runtime environment required by programs that make use
 of extended attributes.
Homepage: https://savannah.nongnu.org/projects/attr/

Package: libaudit-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 22
Maintainer: Laurent Bigonville <bigon@debian.org>
Architecture: all
Multi-Arch: foreign
Source: audit
Version: 1:3.0.9-1
Conffiles:
 /etc/libaudit.conf cdc703f9d27f0d980271a9e95d0f18b2
Description: Dynamic library for security auditing - common files
 The audit-libs package contains the dynamic libraries needed for
 applications to use the audit framework. It is used to monitor systems for
 security related events.
 .
 This package contains the libaudit.conf configuration file and the associated
 manpage.
Homepage: https://people.redhat.com/sgrubb/audit/

Package: libaudit1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 150
Maintainer: Laurent Bigonville <bigon@debian.org>
Architecture: amd64
Multi-Arch: same
Source: audit
Version: 1:3.0.9-1
Depends: libaudit-common (>= 1:3.0.9-1), libc6 (>= 2.33), libcap-ng0 (>= 0.7.9)
Description: Dynamic library for security auditing
 The audit-libs package contains the dynamic libraries needed for
 applications to use the audit framework. It is used to monitor systems for
 security related events.
Homepage: https://people.redhat.com/sgrubb/audit/

Package: libaugeas0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 594
Maintainer: Hilko Bengen <bengen@debian.org>
Architecture: amd64
Multi-Arch: same
Source: augeas
Version: 1.14.0-1+deb12u1
Depends: libc6 (>= 2.34), libselinux1 (>= 3.1~), libxml2 (>= 2.7.4), augeas-lenses
Suggests: augeas-tools
Description: Augeas configuration editing library and API
 Augeas is a configuration editing tool. It parses configuration files in their
 native formats and transforms them into a tree. Configuration changes are made
 by manipulating this tree and saving it back into native config files.
 .
 The transformation works very hard to preserve comments and formatting
 details. It is controlled by ``lens'' definitions that describe the file
 format and the transformation into a tree.
Homepage: http://augeas.net/

Package: libavahi-client3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 117
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: avahi
Version: 0.8-10+deb12u1
Depends: libavahi-common3 (= 0.8-10+deb12u1), libc6 (>= 2.34), libdbus-1-3 (>= 1.9.14)
Description: Avahi client library
 Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
 It allows programs to publish and discover services and hosts
 running on a local network with no specific configuration. For
 example you can plug into a network and instantly find printers to
 print to, files to look at and people to talk to.
 .
 This package contains the library for Avahi's C API which  allows you
 to integrate mDNS/DNS-SD functionality into your application.
Homepage: https://avahi.org/

Package: libavahi-common-data
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 738
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: avahi
Version: 0.8-10+deb12u1
Description: Avahi common data files
 Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
 It allows programs to publish and discover services and hosts
 running on a local network with no specific configuration. For
 example you can plug into a network and instantly find printers to
 print to, files to look at and people to talk to.
 .
 This package contains common data files for avahi.
Homepage: https://avahi.org/

Package: libavahi-common3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 94
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: avahi
Version: 0.8-10+deb12u1
Depends: libc6 (>= 2.34), libavahi-common-data (= 0.8-10+deb12u1)
Description: Avahi common library
 Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
 It allows programs to publish and discover services and hosts
 running on a local network with no specific configuration. For
 example you can plug into a network and instantly find printers to
 print to, files to look at and people to talk to.
 .
 This package contains the Avahi common library, which is a set of common
 functions used by many of Avahis components and client applications.
Homepage: https://avahi.org/

Package: libavc1394-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 62
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libavc1394
Version: 0.5.4-5
Depends: libc6 (>= 2.14), libraw1394-11
Description: control IEEE 1394 audio/video devices
 libavc1394 is a programming interface for the 1394 Trade Association AV/C
 (Audio/Video Control) Digital Interface Command Set. It allows you to
 remote control camcorders and similar devices connected to your computer
 via an IEEE 1394 (aka Firewire) link.
 .
 This package includes the libraries needed to run executables using
 libavc1394.
Homepage: http://sourceforge.net/projects/libavc1394/

Package: libavcodec59
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 14701
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ffmpeg
Version: 7:5.1.9-0+deb12u1
Depends: libaom3 (>= 3.2.0), libavutil57 (= 7:5.1.9-0+deb12u1), libc6 (>= 2.35), libcairo2 (>= 1.2.4), libcodec2-1.0 (>= 1.0.5), libdav1d6 (>= 0.9.0), libglib2.0-0 (>= 2.12.0), libgsm1 (>= 1.0.18), libjxl0.7 (>= 0.7.0), liblzma5 (>= 5.1.1alpha+20120614), libmfx1 (>= 18.4.0), libmp3lame0 (>= 3.100), libopenjp2-7 (>= 2.0.0), libopus0 (>= 1.1), librav1e0 (>= 0.5.1), librsvg2-2 (>= 2.14.4), libshine3 (>= 3.1.0), libsnappy1v5 (>= 1.1.9), libspeex1 (>= 1.2~), libsvtav1enc1 (>= 1.4.1+dfsg), libswresample4 (>= 7:5.0), libtheora0 (>= 1.0), libtwolame0 (>= 0.3.10), libva2 (>= 2.9.0), libvorbis0a (>= 1.1.2), libvorbisenc2 (>= 1.1.2), libvpx7 (>= 1.12.0), libwebp7 (>= 1.2.4), libwebpmux3 (>= 1.2.4), libx264-164 (>= 2:0.164.3095+gitbaee400), libx265-199 (>= 3.5), libxvidcore4 (>= 1.2.2), libzvbi0 (>= 0.2.35), zlib1g (>= 1:1.2.0)
Suggests: libcuda1, libnvcuvid1, libnvidia-encode1
Description: FFmpeg library with de/encoders for audio/video codecs - runtime files
 FFmpeg is the leading multimedia framework, able to decode, encode, transcode,
 mux, demux, stream, filter and play pretty much anything that humans and
 machines have created. It supports the most obscure ancient formats up to the
 cutting edge.
 .
 This library provides a generic encoding/decoding framework and
 contains multiple decoders and encoders for audio, video and subtitle streams,
 and several bitstream filters.
 .
 The shared architecture provides various services ranging from bit stream I/O
 to DSP optimizations, and makes it suitable for implementing robust and fast
 codecs as well as for experimentation.
 .
 This package contains the runtime files.
Homepage: https://ffmpeg.org/

Package: libavdevice59
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 300
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ffmpeg
Version: 7:5.1.9-0+deb12u1
Depends: libasound2 (>= 1.0.16), libavc1394-0 (>= 0.5.3), libavcodec59 (>= 7:5.0), libavfilter8 (>= 7:5.1), libavformat59 (= 7:5.1.9-0+deb12u1), libavutil57 (= 7:5.1.9-0+deb12u1), libc6 (>= 2.34), libcaca0 (>= 0.99.beta20), libcdio-cdda2 (>= 10.2+2.0.0), libcdio-paranoia2 (>= 10.2+2.0.0), libdc1394-25 (>= 2.2.6), libdrm2 (>= 2.4.101), libgl1, libiec61883-0 (>= 1.2.0), libjack-jackd2-0 (>= 1.9.10+20150825) | libjack-0.125, libopenal1 (>= 1.14), libpulse0 (>= 0.99.1), libraw1394-11 (>= 2.1.2), libsdl2-2.0-0 (>= 2.0.12), libx11-6, libxcb-shape0, libxcb-shm0, libxcb-xfixes0, libxcb1, libxext6, libxv1
Description: FFmpeg library for handling input and output devices - runtime files
 FFmpeg is the leading multimedia framework, able to decode, encode, transcode,
 mux, demux, stream, filter and play pretty much anything that humans and
 machines have created. It supports the most obscure ancient formats up to the
 cutting edge.
 .
 This library provides a generic framework for grabbing from and rendering to
 many common multimedia input/output devices, and supports several input and
 output devices, including Video4Linux2, VfW, DShow, and ALSA.
 .
 This package contains the runtime files.
Homepage: https://ffmpeg.org/

Package: libavfilter8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 12411
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ffmpeg
Version: 7:5.1.9-0+deb12u1
Depends: libass9 (>= 1:0.13.6), libavcodec59 (= 7:5.1.9-0+deb12u1), libavformat59 (>= 7:5.0), libavutil57 (= 7:5.1.9-0+deb12u1), libbs2b0 (>= 3.1.0+dfsg), libc6 (>= 2.35), libflite1 (>= 1.4-release-9~), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.2.1), libfribidi0 (>= 0.19.2), liblilv-0-0 (>= 0.14.2~dfsg0), libmfx1 (>= 18.4.0), libmysofa1 (>= 0.7~), libplacebo208 (>= 4.208.0), libpocketsphinx3 (>= 0.8+5prealpha+1), libpostproc56 (>= 7:5.0), librubberband2 (>= 3.1.2+dfsg0), libsphinxbase3 (>= 0.8+5prealpha), libstdc++6 (>= 11), libswresample4 (>= 7:5.1), libswscale6 (>= 7:5.0), libva2 (>= 1.7.3), libvidstab1.1, libzimg2 (>= 0.3.1), libzmq5 (>= 3.2.3+dfsg), ocl-icd-libopencl1 | libopencl1, ocl-icd-libopencl1 (>= 1.0) | libopencl-1.2-1, zlib1g (>= 1:1.1.4)
Description: FFmpeg library containing media filters - runtime files
 FFmpeg is the leading multimedia framework, able to decode, encode, transcode,
 mux, demux, stream, filter and play pretty much anything that humans and
 machines have created. It supports the most obscure ancient formats up to the
 cutting edge.
 .
 This library provides a generic audio/video filtering framework containing
 several filters, sources and sinks.
 .
 This package contains the runtime files.
Homepage: https://ffmpeg.org/

Package: libavformat59
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2819
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ffmpeg
Version: 7:5.1.9-0+deb12u1
Depends: libavcodec59 (= 7:5.1.9-0+deb12u1), libavutil57 (= 7:5.1.9-0+deb12u1), libbluray2 (>= 1:0.2.2), libbz2-1.0, libc6 (>= 2.35), libchromaprint1 (>= 1.3.2), libgme0 (>= 0.5.5), libgnutls30 (>= 3.7.5), libopenmpt0 (>= 0.3.0), librabbitmq4 (>= 0.6.0), librist4 (>= 0.2.6+dfsg), libsrt1.5-gnutls (>= 1.5.1), libssh-gcrypt-4 (>= 0.8.0), libxml2 (>= 2.7.4), libzmq5 (>= 4.0.1+dfsg), zlib1g (>= 1:1.2.0.2)
Description: FFmpeg library with (de)muxers for multimedia containers - runtime files
 FFmpeg is the leading multimedia framework, able to decode, encode, transcode,
 mux, demux, stream, filter and play pretty much anything that humans and
 machines have created. It supports the most obscure ancient formats up to the
 cutting edge.
 .
 This library provides a generic framework for multiplexing and demultiplexing
 (muxing and demuxing) audio, video and subtitle streams. It encompasses
 multiple muxers and demuxers for multimedia container formats. It also
 supports several input and output protocols to access a media resource.
 .
 This package contains the runtime files.
Homepage: https://ffmpeg.org/

Package: libavif15
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 203
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libavif
Version: 0.11.1-1+deb12u1
Depends: libaom3 (>= 3.2.0), libc6 (>= 2.14), libdav1d6 (>= 0.1.0), libgav1-1 (>= 0.18.0), librav1e0 (>= 0.5.1), libsvtav1enc1 (>= 1.4.1+dfsg), libyuv0 (>= 0.0~git20221206)
Description: Library for handling .avif files
 This library aims to be a friendly, portable C implementation of the AV1
 Image File Format as described in https://aomediacodec.github.io/av1-avif/.
 .
 This package provides the shared library files.
Homepage: https://github.com/AOMediaCodec/libavif

Package: libavutil57
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1031
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ffmpeg
Version: 7:5.1.9-0+deb12u1
Depends: libc6 (>= 2.35), libdrm2 (>= 2.4.66), libmfx1 (>= 18.4.0), libva-drm2 (>= 1.3), libva-x11-2 (>= 1.3), libva2 (>= 2.1.0), libvdpau1 (>= 0.2), libx11-6, ocl-icd-libopencl1 | libopencl1, ocl-icd-libopencl1 (>= 1.0) | libopencl-1.2-1
Description: FFmpeg library with functions for simplifying programming - runtime files
 FFmpeg is the leading multimedia framework, able to decode, encode, transcode,
 mux, demux, stream, filter and play pretty much anything that humans and
 machines have created. It supports the most obscure ancient formats up to the
 cutting edge.
 .
 This library is a utility library to aid portable multimedia programming.
 It contains safe portable string functions, random number generators, data
 structures, additional mathematics functions, cryptography and multimedia
 related functionality (like enumerations for pixel and sample formats).
 It is not a library for code needed by both libavcodec and libavformat.
 The goal for this library is to be modular, small, efficient and useful.
 .
 This package contains the runtime files.
Homepage: https://ffmpeg.org/

Package: libbdplus0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 135
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libbdplus
Version: 0.2.0-3
Depends: libc6 (>= 2.33), libgcrypt20 (>= 1.10.0), libgpg-error0 (>= 1.14)
Recommends: libaacs0
Enhances: libbluray2
Description: implementation of BD+ for reading Blu-ray Discs
 libbdplus is a research project to implement the BD+ System Specifications.
 It provides, through an open-source library, a way to understand how the BD+
 works.
 .
 This package DOES NOT provide any key, certificate, configuration
 file or virtual machine that could be used to decode encrypted
 copyrighted material.
 .
 This package provides the shared library.
Homepage: https://www.videolan.org/developers/libbdplus.html

Package: libbinutils
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 2469
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: binutils
Version: 2.40-2
Replaces: binutils (<< 2.29-6)
Depends: libc6 (>= 2.34), libzstd1 (>= 1.5.2), zlib1g (>= 1:1.2.0), binutils-common (= 2.40-2)
Breaks: binutils (<< 2.29-6)
Description: GNU binary utilities (private shared library)
 This package includes the private shared libraries libbfd and libopcodes.
Homepage: https://www.gnu.org/software/binutils/

Package: libblas3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 464
Maintainer: Debian Science Team <debian-science-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: lapack
Version: 3.11.0-2
Provides: libblas.so.3
Depends: libc6 (>= 2.14)
Description: Basic Linear Algebra Reference implementations, shared library
 BLAS (Basic Linear Algebra Subroutines) is a set of efficient
 routines for most of the basic vector and matrix operations.
 They are widely used as the basis for other high quality linear
 algebra software, for example lapack and linpack.  This
 implementation is the Fortran 77 reference implementation found
 at netlib.
 .
 This package contains a shared version of the library.
Homepage: https://www.netlib.org/lapack/

Package: libblkid1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 398
Maintainer: util-linux packagers <util-linux@packages.debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.38.1-5+deb12u3
Depends: libc6 (>= 2.33)
Description: block device ID library
 The blkid library allows system programs such as fsck and mount to
 quickly and easily find block devices by filesystem UUID or label.
 This allows system administrators to avoid specifying filesystems by
 hard-coded device names and use a logical naming system instead.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/

Package: libbluray2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 348
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libbluray
Version: 1:1.3.4-1
Depends: libc6 (>= 2.34), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.2.1), libudfread0 (>= 1.1.1), libxml2 (>= 2.7.4)
Recommends: libaacs0
Suggests: libbluray-bdj
Description: Blu-ray disc playback support library (shared library)
 libbluray is an open-source library designed for Blu-Ray Discs playback for
 media players, like VLC or MPlayer. This research project is developed by an
 international team of developers from Doom9. libbluray integrates navigation,
 playlist parsing, menus, and BD-J.
 .
 NB: Most commercial Blu-Ray are restricted by AACS or BD+ technologies and this
 library is not enough to playback those discs.
 .
 This package provides the shared library.
Homepage: https://www.videolan.org/developers/libbluray.html

Package: libbpf1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 385
Maintainer: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Architecture: amd64
Multi-Arch: same
Source: libbpf (1.1.2-0+deb12u1)
Version: 1:1.1.2-0+deb12u1
Depends: libc6 (>= 2.34), libelf1 (>= 0.144), zlib1g (>= 1:1.2.3.3)
Description: eBPF helper library (shared library)
 libbpf is a library for loading eBPF programs and reading and
 manipulating eBPF objects from user-space.
 .
 This package contains the shared library.

Package: libbrotli-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 899
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: amd64
Multi-Arch: same
Source: brotli (1.0.9-2)
Version: 1.0.9-2+b6
Depends: libbrotli1 (= 1.0.9-2+b6)
Description: library implementing brotli encoder and decoder (development files)
 Brotli is a generic-purpose lossless compression algorithm
 that compresses data using a combination of a modern variant
 of the LZ77 algorithm, Huffman coding and 2nd order context modeling,
 with a compression ratio comparable to the best currently available
 general-purpose compression methods. It is similar in speed with
 deflate but offers more dense compression.
 .
 This package installs development files.
Homepage: https://github.com/google/brotli

Package: libbrotli1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 783
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: amd64
Multi-Arch: same
Source: brotli (1.0.9-2)
Version: 1.0.9-2+b6
Depends: libc6 (>= 2.29)
Description: library implementing brotli encoder and decoder (shared libraries)
 Brotli is a generic-purpose lossless compression algorithm
 that compresses data using a combination of a modern variant
 of the LZ77 algorithm, Huffman coding and 2nd order context modeling,
 with a compression ratio comparable to the best currently available
 general-purpose compression methods. It is similar in speed with
 deflate but offers more dense compression.
 .
 This package installs shared libraries.
Homepage: https://github.com/google/brotli

Package: libbs2b0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 41
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libbs2b
Version: 3.1.0+dfsg-7
Depends: libc6 (>= 2.29), libstdc++6 (>= 4.1.1)
Description: Bauer stereophonic-to-binaural DSP library
 The Bauer stereophonic-to-binaural DSP (bs2b) is designed to improve
 headphone listening of stereo audio records.
 .
 Typical stereo recordings are made for listening with speakers.
 What's missing in headphones is the sound going from each channel
 to the opposite ear, arriving a short time later for the extra distance
 traveled, and with a bit of high frequency roll-off for the shadowing
 effect of the head. The time delay to the far ear should also be
 somewhat longer at low frequencies than at high frequencies. bs2b
 implements both of these ideas to transform stereophonic recordings
 for headphone listening.
Homepage: https://bs2b.sourceforge.net/

Package: libbsd0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 202
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libbsd
Version: 0.11.7-2
Depends: libc6 (>= 2.34), libmd0 (>= 1.0.3-2)
Description: utility functions from BSD systems - shared library
 This library provides some C functions such as strlcpy() that are commonly
 available on BSD systems but not on others like GNU systems.
 .
 For a detailed list of the provided functions, please see the libbsd-dev
 package description.
Homepage: https://libbsd.freedesktop.org/

Package: libbz2-1.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 106
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: same
Source: bzip2 (1.0.8-5)
Version: 1.0.8-5+b1
Depends: libc6 (>= 2.4)
Description: high-quality block-sorting file compressor library - runtime
 This package contains libbzip2 which is used by the bzip2 compressor.
 .
 bzip2 is a freely available, patent free, data compressor.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding.  Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
Homepage: https://sourceware.org/bzip2/

Package: libbz2-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 95
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: same
Source: bzip2 (1.0.8-5)
Version: 1.0.8-5+b1
Replaces: bzip2 (<< 0.9.5d-3)
Depends: libbz2-1.0 (= 1.0.8-5+b1), libc6-dev | libc-dev
Recommends: bzip2-doc
Description: high-quality block-sorting file compressor library - development
 Static libraries and include files for the bzip2 compressor library.
 .
 bzip2 is a freely available, patent free, data compressor.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding.  Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
Homepage: https://sourceware.org/bzip2/

Package: libc-bin
Essential: yes
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 2042
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: glibc
Version: 2.36-9+deb12u14
Depends: libc6 (>> 2.36), libc6 (<< 2.37)
Recommends: manpages
Breaks: dh-lua (<< 27+nmu1~)
Conffiles:
 /etc/bindresvport.blacklist 4c09213317e4e3dd3c71d74404e503c5
 /etc/default/nss d6d5d6f621fb3ead2548076ce81e309c
 /etc/gai.conf 28fa76ff5a9e0566eaa1e11f1ce51f09
 /etc/ld.so.conf 4317c6de8564b68d628c21efa96b37e4
 /etc/ld.so.conf.d/libc.conf d4d833fd095fb7b90e1bb4a547f16de6
Description: GNU C Library: Binaries
 This package contains utility programs related to the GNU C Library.
 .
  * getconf: query system configuration variables
  * getent: get entries from administrative databases
  * iconv, iconvconfig: convert between character encodings
  * ldd, ldconfig: print/configure shared library dependencies
  * locale, localedef: show/generate locale definitions
  * tzselect, zdump, zic: select/dump/compile time zones
Homepage: https://www.gnu.org/software/libc/libc.html

Package: libc-dev-bin
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 94
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: glibc
Version: 2.36-9+deb12u14
Depends: libc6 (>> 2.36), libc6 (<< 2.37)
Recommends: manpages, manpages-dev, libc-devtools (>> 2.36)
Description: GNU C Library: Development binaries
 This package contains utility programs related to the GNU C Library
 development package.
 .
  * gencat: generate message catalogs
Homepage: https://www.gnu.org/software/libc/libc.html

Package: libc-devtools
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 138
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: glibc
Version: 2.36-9+deb12u14
Replaces: libc-dev-bin (<< 2.31-8)
Depends: libc6 (>= 2.34), libgd3 (>= 2.1.0~alpha~)
Recommends: manpages, manpages-dev
Breaks: libc-dev-bin (<< 2.31-8)
Description: GNU C Library: Development tools
 This package contains development tools shipped by the GNU C
 Library.
 .
  * memusage, memusagestat: profile a program's memory usage
  * mtrace: interpret the malloc trace log
  * sotruss: trace shared library calls
  * sprof: display shared object profiling data
Homepage: https://www.gnu.org/software/libc/libc.html

Package: libc-l10n
Status: install ok installed
Priority: standard
Section: localization
Installed-Size: 4350
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: glibc
Version: 2.36-9+deb12u14
Description: GNU C Library: localization files
 This package contains the translation files for the GNU C library and
 utility programs.
Homepage: https://www.gnu.org/software/libc/libc.html

Package: libc6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 13001
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: glibc
Version: 2.36-9+deb12u14
Replaces: libc6-amd64
Depends: libgcc-s1
Recommends: libidn2-0 (>= 2.0.5~)
Suggests: glibc-doc, debconf | debconf-2.0, libc-l10n, locales, libnss-nis, libnss-nisplus
Breaks: aide (<< 0.17.3-4+b3), busybox (<< 1.30.1-6), chrony (<< 4.2-3~), fakechroot (<< 2.19-3.5), firefox (<< 91~), firefox-esr (<< 91~), gnumach-image-1.8-486 (<< 2:1.8+git20210923~), gnumach-image-1.8-486-dbg (<< 2:1.8+git20210923~), gnumach-image-1.8-xen-486 (<< 2:1.8+git20210923~), gnumach-image-1.8-xen-486-dbg (<< 2:1.8+git20210923~), hurd (<< 1:0.9.git20220301-2), ioquake3 (<< 1.36+u20200211.f2c61c1~dfsg-2~), iraf-fitsutil (<< 2018.07.06-4), libgegl-0.4-0 (<< 0.4.18), libtirpc1 (<< 0.2.3), locales (<< 2.36), locales-all (<< 2.36), macs (<< 2.2.7.1-3~), nocache (<< 1.1-1~), nscd (<< 2.36), openarena (<< 0.8.8+dfsg-4~), openssh-server (<< 1:8.1p1-5), python3-iptables (<< 1.0.0-2), r-cran-later (<< 0.7.5+dfsg-2), tinydns (<< 1:1.05-14), valgrind (<< 1:3.19.0-1~), wcc (<< 0.0.2+dfsg-3)
Conffiles:
 /etc/ld.so.conf.d/x86_64-linux-gnu.conf d4e7a7b88a71b5ffd9e2644e71a0cfab
Description: GNU C Library: Shared libraries
 Contains the standard libraries that are used by nearly all programs on
 the system. This package includes shared versions of the standard C library
 and the standard math library, as well as many others.
Homepage: https://www.gnu.org/software/libc/libc.html

Package: libc6-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 11975
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: glibc
Version: 2.36-9+deb12u14
Replaces: libc6 (<= 2.32-1)
Provides: libc-dev (= 2.36-9+deb12u14)
Depends: libc6 (= 2.36-9+deb12u14), libc-dev-bin (= 2.36-9+deb12u14), linux-libc-dev, libcrypt-dev, libnsl-dev, rpcsvc-proto
Suggests: glibc-doc, manpages-dev
Breaks: binutils (<< 2.38), catch (<< 1.12.2-0.1), heimdal-multidev (<= 7.7.0+dfsg-4), igblast (<= 1.19.0-1), libassimp-dev (<= 5.2.4~ds0-1), libasyncns-dev (<= 0.8-6+b2), libatm1-dev (<= 1:2.5.1-4), libaws20-dev (<= 20.2-2+b1), libboinc-app-dev (<= 7.20.2+dfsg-1), libbson-dev (<= 1.22.0-1), libc6-dev-amd64-cross (<< 2.36~), libcups2-dev (<= 2.4.2-1), libdeal.ii-dev (<= 9.4.0-1), libdkim-dev (<= 1:1.0.21-4+b2), libdolfin-dev-common (<= 2019.2.0~git20220407.d29e24d-5), libeckit-dev (<= 1.20.0-1), libfclib-dev (<= 3.1.0+dfsg-2), libfltk1.3-dev (<= 1.3.8-4+b1), libgcc-10-dev (<< 10-20200321-1~), libgcc-7-dev (<< 7.5.0-6~), libgcc-8-dev (<< 8.4.0-2~), libgcc-9-dev (<< 9.3.0-5~), libghc-resolv-dev (<= 0.1.2.0-3), libghc-resolv-prof (<= 0.1.2.0-3), libglib2.0-dev (<= 2.72.3-1), libgloox-dev (<= 1.0.24-2+b1), libhesiod-dev (<= 3.2.1-3.1+b1), libinfinity-0.7-dev (<= 0.7.2-1+b1), libinsighttoolkit4-dev (<= 4.13.3withdata-dfsg2-3+b1), libinsighttoolkit5-dev (<= 5.2.1-5+b1), libismrmrd-dev (<= 1.8.0-2), libldap-dev (<= 2.5.12+dfsg-2), liblog4cplus-dev (<= 2.0.7-1), libloudmouth1-dev (<= 1.5.4-1), libmgl-dev (<= 8.0.1-2), libmimalloc2.0 (<= 2.0.6+ds-1), libminc-dev (<= 2.4.03-5), libmongoc-dev (<= 1.22.1-1), libmrpt-ros1bridge-dev (<= 1:2.4.9+ds-4+b2), libmysqlclient-dev (<= 8.0.29-1), libnetcdf-dev (<= 1:4.9.0-3), libnetcdf-mpi-dev (<= 1:4.9.0-1), libnetcdf-pnetcdf-dev (<= 1:4.9.0-1), libnfsidmap-dev (<= 1:2.6.1-2), libns3-dev (<= 3.36.1+dfsg-4), libola-dev (<= 0.10.8.nojsmin-2), libopenafs-dev (<= 1.8.8.1-3), libopendkim-dev (<= 2.11.0~beta2-7), libopendmarc-dev (<= 1.4.2-1), libopenms-dev (<= 2.6.0+cleaned1-3+b1), libopenzwave1.6-dev (<= 1.6.1914+ds-1), libperl5.26 (<< 5.26.1-3), libpg-query-dev (<= 13-2.1.2-2), librbl-dev (<= 2.11.0~beta2-7), libre-dev (<= 1.1.0-1+b1), libshishi-dev (<= 1.0.2-11), libslurm-dev (<= 21.08.8.2-1), libsocksd0-dev (<= 1.4.2+dfsg-7+b4), libspf2-dev (<= 1.2.10-7.1+b1), libstrophe-dev (<= 0.12.1-2), libtaningia-dev (<= 0.2.2-2+b1), libtrilinos-amesos-dev (<= 13.2.0-3), libtrilinos-amesos2-dev (<= 13.2.0-3), libtrilinos-anasazi-dev (<= 13.2.0-3), libtrilinos-aztecoo-dev (<= 13.2.0-3), libtrilinos-belos-dev (<= 13.2.0-3), libtrilinos-epetra-dev (<= 13.2.0-3), libtrilinos-epetraext-dev (<= 13.2.0-3), libtrilinos-galeri-dev (<= 13.2.0-3), libtrilinos-ifpack-dev (<= 13.2.0-3), libtrilinos-ifpack2-dev (<= 13.2.0-3), libtrilinos-intrepid-dev (<= 13.2.0-3), libtrilinos-intrepid2-dev (<= 13.2.0-3), libtrilinos-isorropia-dev (<= 13.2.0-3), libtrilinos-kokkos-dev (<= 13.2.0-3), libtrilinos-kokkos-kernels-dev (<= 13.2.0-3), libtrilinos-komplex-dev (<= 13.2.0-3), libtrilinos-ml-dev (<= 13.2.0-3), libtrilinos-moertel-dev (<= 13.2.0-3), libtrilinos-muelu-dev (<= 13.2.0-3), libtrilinos-nox-dev (<= 13.2.0-3), libtrilinos-phalanx-dev (<= 13.2.0-3), libtrilinos-pike-dev (<= 13.2.0-3), libtrilinos-piro-dev (<= 13.2.0-3), libtrilinos-pliris-dev (<= 13.2.0-3), libtrilinos-rol-dev (<= 13.2.0-3), libtrilinos-rtop-dev (<= 13.2.0-3), libtrilinos-rythmos-dev (<= 13.2.0-3), libtrilinos-sacado-dev (<= 13.2.0-3), libtrilinos-shylu-dev (<= 13.2.0-3), libtrilinos-stokhos-dev (<= 13.2.0-3), libtrilinos-stratimikos-dev (<= 13.2.0-3), libtrilinos-teko-dev (<= 13.2.0-3), libtrilinos-teuchos-dev (<= 13.2.0-3), libtrilinos-thyra-dev (<= 13.2.0-3), libtrilinos-tpetra-dev (<= 13.2.0-3), libtrilinos-trilinoscouplings-dev (<= 13.2.0-3), libtrilinos-triutils-dev (<= 13.2.0-3), libtrilinos-xpetra-dev (<= 13.2.0-3), libtrilinos-zoltan2-dev (<= 13.2.0-3), libvbr-dev (<= 2.11.0~beta2-7), libvisp-dev (<= 3.5.0-2+b1), libvotca-dev (<= 2022-3), libvtk6-dev (<= 6.3.0+dfsg2-8.1+b1), libvtk7-dev (<= 7.1.1+dfsg2-10.2), open-vm-tools-dev (<= 2:12.0.5-2), pidgin-librvp (<= 0.9.7cvs-3), proftpd-dev (<= 1.3.7d+dfsg-2), python3.7 (<< 3.7.7-1+b1), python3.8 (<< 3.8.2-1+b1), slurm-wlm-basic-plugins-dev (<= 21.08.8.2-1)
Conflicts: libc0.1-dev, libc0.3-dev, libc6.1-dev
Description: GNU C Library: Development Libraries and Header Files
 Contains the symlinks, headers, and object files needed to compile
 and link programs which use the standard C library.
Homepage: https://www.gnu.org/software/libc/libc.html

Package: libcaca0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 895
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libcaca
Version: 0.99.beta20-3+deb12u1
Depends: libc6 (>= 2.34), libncursesw6 (>= 6), libslang2 (>= 2.2.4), libstdc++6 (>= 4.1.1), libtinfo6 (>= 6), zlib1g (>= 1:1.1.4)
Description: colour ASCII art library
 libcaca is the Colour AsCii Art library. It provides high level functions
 for colour text drawing, simple primitives for line, polygon and ellipse
 drawing, as well as powerful image to text conversion routines.
 .
 This package contains the shared library for libcaca.
Homepage: http://caca.zoy.org/wiki/libcaca

Package: libcairo-gobject2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 178
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: cairo
Version: 1.16.0-7
Depends: libcairo2 (= 1.16.0-7), libglib2.0-0 (>= 2.14.0)
Description: Cairo 2D vector graphics library (GObject library)
 Cairo is a multi-platform library providing anti-aliased
 vector-based rendering for multiple target backends.
 .
 This package contains the GObject library, providing wrapper GObject types
 for all cairo types.
Homepage: https://cairographics.org/

Package: libcairo2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1307
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: cairo
Version: 1.16.0-7
Depends: libc6 (>= 2.35), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.9.1), libpixman-1-0 (>= 0.30.0), libpng16-16 (>= 1.6.2-1), libx11-6, libxcb-render0, libxcb-shm0, libxcb1 (>= 1.6), libxext6, libxrender1, zlib1g (>= 1:1.1.4)
Breaks: libwebkit2gtk-3.0-25 (<< 2.4.5-2~), libwebkitgtk-1.0-0 (<< 2.4.5-2~), libwebkitgtk-3.0-0 (<< 2.4.5-2~), weston (<< 1.5.0-3~)
Description: Cairo 2D vector graphics library
 Cairo is a multi-platform library providing anti-aliased
 vector-based rendering for multiple target backends. Paths consist
 of line segments and cubic splines and can be rendered at any width
 with various join and cap styles. All colors may be specified with
 optional translucence (opacity/alpha) and combined using the
 extended Porter/Duff compositing algebra as found in the X Render
 Extension.
 .
 Cairo exports a stateful rendering API similar in spirit to the path
 construction, text, and painting operators of PostScript, (with the
 significant addition of translucence in the imaging model). When
 complete, the API is intended to support the complete imaging model of
 PDF 1.4.
 .
 This package contains the shared libraries.
Homepage: https://cairographics.org/

Package: libcap-ng0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 65
Maintainer: Håvard F. Aasen <havard.f.aasen@pfft.no>
Architecture: amd64
Multi-Arch: same
Source: libcap-ng (0.8.3-1)
Version: 0.8.3-1+b3
Depends: libc6 (>= 2.33)
Description: alternate POSIX capabilities library
 This library implements the user-space interfaces to the POSIX
 1003.1e capabilities available in Linux kernels.  These capabilities are
 a partitioning of the all powerful root privilege into a set of distinct
 privileges.
 .
 The libcap-ng library is intended to make programming with POSIX
 capabilities much easier than the traditional libcap library.
 .
 This package contains dynamic libraries for libcap-ng.
Homepage: https://people.redhat.com/sgrubb/libcap-ng

Package: libcap2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 95
Maintainer: Christian Kastner <ckk@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libcap2 (1:2.66-4+deb12u3)
Version: 1:2.66-4+deb12u3+b1
Depends: libc6 (>= 2.34)
Description: POSIX 1003.1e capabilities (library)
 Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities
 available in Linux kernels. These capabilities are a partitioning of the all
 powerful root privilege into a set of distinct privileges.
 .
 This package contains the shared library.
Homepage: https://sites.google.com/site/fullycapable/

Package: libcap2-bin
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 133
Maintainer: Christian Kastner <ckk@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: libcap2 (1:2.66-4+deb12u3)
Version: 1:2.66-4+deb12u3+b1
Replaces: libcap-bin
Depends: libc6 (>= 2.34), libcap2 (>= 1:2.63)
Recommends: libpam-cap
Breaks: libcap-bin
Description: POSIX 1003.1e capabilities (utilities)
 Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities
 available in Linux kernels. These capabilities are a partitioning of the all
 powerful root privilege into a set of distinct privileges.
 .
 This package contains additional utilities.
Homepage: https://sites.google.com/site/fullycapable/

Package: libcbor0.8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 98
Maintainer: Vincent Bernat <bernat@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libcbor (0.8.0-2)
Version: 0.8.0-2+b1
Depends: libc6 (>= 2.14)
Description: library for parsing and generating CBOR (RFC 7049)
 CBOR is a general-purpose schema-less binary data format, defined in
 RFC 7049. This package provides a C library for parsing and generating
 CBOR. The main features are:
 .
  - Complete RFC conformance
  - Robust C99 implementation
  - Layered architecture offers both control and convenience
  - Flexible memory management
  - No shared global state - threading friendly
  - Proper handling of UTF-8
  - Full support for streams & incremental processing
  - Extensive documentation and test suite
  - No runtime dependencies, small footprint
 .
 This package contains the runtime library.
Homepage: https://github.com/PJK/libcbor

Package: libcc1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 136
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.2.0-14+deb12u1
Depends: gcc-12-base (= 12.2.0-14+deb12u1), libc6 (>= 2.14), libgcc-s1 (>= 3.0), libstdc++6 (>= 5.2)
Description: GCC cc1 plugin for GDB
 libcc1 is a plugin for GDB.
Homepage: http://gcc.gnu.org/

Package: libcdio-cdda2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 55
Maintainer: Philippe SWARTVAGHER <phil.swart@gmx.fr>
Architecture: amd64
Multi-Arch: same
Source: libcdio-paranoia
Version: 10.2+2.0.1-1
Depends: libc6 (>= 2.33), libcdio19 (>= 2.1.0)
Description: library to read and control digital audio CDs
 This library is made to read and control digital audio CDs. It does
 not play such CDs, it only reads them digitally. As it uses libcdio as
 a backend, it supports the same kind of CDROM drives (and images) as
 libcdio.
Homepage: https://www.gnu.org/software/libcdio/

Package: libcdio-paranoia2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 55
Maintainer: Philippe SWARTVAGHER <phil.swart@gmx.fr>
Architecture: amd64
Multi-Arch: same
Source: libcdio-paranoia
Version: 10.2+2.0.1-1
Depends: libc6 (>= 2.14), libcdio-cdda2 (>= 10.2+2.0.0), libcdio19 (>= 2.1.0)
Description: library to read digital audio CDs with error correction
 This library is made to read digital audio CDs, with error
 correction. It does its best to correct errors and jitter that happen
 when reading such discs. As it uses libcdio as a backend, it supports
 the same kind of CDROM drives (and images) as libcdio.
Homepage: https://www.gnu.org/software/libcdio/

Package: libcdio19
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 324
Maintainer: Gabriel F. T. Gomes <gabriel@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libcdio
Version: 2.1.0-4
Depends: libc6 (>= 2.33)
Description: library to read and control CD-ROM
 This library is to encapsulate CD-ROM reading and
 control. Applications wishing to be oblivious of the OS- and
 device-dependant properties of a CD-ROM can use this library.
 .
 Some support for disk image types like BIN/CUE and NRG is available,
 so applications that use this library also have the ability to read
 disc images as though they were CD's.
Homepage: https://www.gnu.org/software/libcdio/

Package: libcgi-fast-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 29
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 1:2.15-1
Depends: perl, libcgi-pm-perl, libfcgi-perl
Description: CGI subclass for work with FCGI
 CGI::Fast is a subclass of the CGI object created by CGI.pm. It is
 specialized to work with the FCGI module, which greatly speeds up CGI scripts
 by turning them into persistently running server processes. Scripts that
 perform time-consuming initialization processes, such as loading large
 modules or opening persistent database connections, will see large
 performance improvements.
Homepage: https://metacpan.org/release/CGI-Fast

Package: libcgi-pm-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 477
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 4.55-1
Depends: perl:any, libhtml-parser-perl
Recommends: libcgi-fast-perl
Description: module for Common Gateway Interface applications
 CGI.pm is a Perl module that provides classes useful for creating Web forms
 and for parsing their contents. It defines CGI objects, entities that contain
 the values of the current query string and other state variables.
Homepage: https://metacpan.org/release/CGI

Package: libchromaprint1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 108
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: chromaprint (1.5.1-2)
Version: 1.5.1-2+b1
Depends: libavcodec59 (>= 7:5.0), libavutil57 (>= 7:5.0), libc6 (>= 2.29), libgcc-s1 (>= 3.4), libstdc++6 (>= 11)
Description: audio fingerprint library
 Chromaprint is a library for calculating audio fingerprints
 which are used by the Acoustid service. Its main purpose is to provide an
 accurate identifier for record tracks
Homepage: https://acoustid.org/chromaprint

Package: libcjson1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 60
Maintainer: Boyuan Yang <byang@debian.org>
Architecture: amd64
Multi-Arch: same
Source: cjson
Version: 1.7.15-1+deb12u4
Depends: libc6 (>= 2.14)
Description: Ultralightweight JSON parser in ANSI C
 cJSON is a ultralightweight json parse.
 .
 It aims to be the dumbest possible parser that you can get your job done with.
 .
 It's a single file of C, and a single header file.
 .
 This package contains the shared libraries.
Homepage: https://github.com/DaveGamble/cJSON

Package: libclone-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 41
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Version: 0.46-1
Depends: perl (>= 5.36.0-4), perlapi-5.36.0, libc6 (>= 2.14)
Description: module for recursively copying Perl datatypes
 The Clone module provides a clone() method which makes recursive copies of
 nested hash, array, scalar and reference types, including tied variables and
 objects.
 .
 It is faster (although less flexible) than Storable's dclone. Its
 functionality is _not_ serializing in-memory objects (i.e. as
 Data::Dumper or YAML::Dump do), but deep-copying them over to new
 in-memory structures.
Homepage: https://metacpan.org/release/Clone

Package: libcodec2-1.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 16473
Maintainer: A. Maitland Bottoms <bottoms@debian.org>
Architecture: amd64
Multi-Arch: same
Source: codec2
Version: 1.0.5-1
Depends: libc6 (>= 2.32)
Description: Codec2 runtime library
 Next-Generation Digital Voice for Two-Way Radio
 .
 Codec2 is an audio codec especially designed for compressing voice at
 very low bit-rates for applications such as digital voice radio.
 .
 This package contains the codec2 runtime library.
Homepage: http://rowetel.com/codec2.html

Package: libcom-err2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 55
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs (1.47.0-2)
Version: 1.47.0-2+b2
Replaces: libcomerr2 (<< 1.43.9-1~)
Provides: libcomerr2 (= 1.47.0-2+b2)
Depends: libc6 (>= 2.17)
Breaks: libcomerr2 (<< 1.43.9-1~)
Description: common error description library
 libcomerr is an attempt to present a common error-handling mechanism to
 manipulate the most common form of error code in a fashion that does not
 have the problems identified with mechanisms commonly in use.
Homepage: http://e2fsprogs.sourceforge.net

Package: libconfig-inifiles-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 123
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 3.000003-2+deb12u1
Description: read .ini-style configuration files
 Config::IniFiles provides a way to have readable configuration files
 outside your Perl script. Configurations can be imported (inherited,
 stacked, ...), sections can be grouped, and settings can be accessed
 from a tied hash.
Homepage: https://metacpan.org/release/Config-IniFiles/

Package: libcrypt-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 341
Maintainer: Marco d'Itri <md@linux.it>
Architecture: amd64
Multi-Arch: same
Source: libxcrypt
Version: 1:4.4.33-2
Replaces: libc6-dev (<< 2.29-4), libcrypt1-dev, libcrypt2-dev, manpages-dev (<< 5.01-1)
Provides: libcrypt1-dev
Depends: libcrypt1 (= 1:4.4.33-2)
Breaks: libc6-dev (<< 2.29-4), manpages-dev (<< 5.01-1)
Conflicts: libcrypt1-dev, libcrypt2-dev
Description: libcrypt development files
 This package contains the files needed for developing applications that
 use libcrypt.

Package: libcrypt1
Protected: yes
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 233
Maintainer: Marco d'Itri <md@linux.it>
Architecture: amd64
Multi-Arch: same
Source: libxcrypt
Version: 1:4.4.33-2
Replaces: libc6 (<< 2.29-4)
Depends: libc6 (>= 2.36)
Conflicts: libpam0g (<< 1.4.0-10)
Description: libcrypt shared library
 libxcrypt is a modern library for one-way hashing of passwords.
 It supports DES, MD5, NTHASH, SUNMD5, SHA-2-256, SHA-2-512, and
 bcrypt-based password hashes
 It provides the traditional Unix 'crypt' and 'crypt_r' interfaces,
 as well as a set of extended interfaces like 'crypt_gensalt'.
Important: yes

Package: libcryptsetup12
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 563
Maintainer: Debian Cryptsetup Team <pkg-cryptsetup-devel@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: same
Source: cryptsetup
Version: 2:2.6.1-4~deb12u2
Depends: libargon2-1 (>= 0~20171227), libblkid1 (>= 2.24.2), libc6 (>= 2.34), libdevmapper1.02.1 (>= 2:1.02.97), libjson-c5 (>= 0.15), libssl3 (>= 3.0.0), libuuid1 (>= 2.16)
Description: disk encryption support - shared library
 Cryptsetup provides an interface for configuring encryption on block
 devices (such as /home or swap partitions), using the Linux kernel
 device mapper target dm-crypt. It features integrated Linux Unified Key
 Setup (LUKS) support.
 .
 This package provides the libcryptsetup shared library.
Homepage: https://gitlab.com/cryptsetup/cryptsetup

Package: libctf-nobfd0
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 301
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: binutils
Version: 2.40-2
Replaces: libbinutils (<< 2.33.50.20191128-1~)
Depends: libc6 (>= 2.14), zlib1g (>= 1:1.2.0)
Breaks: libbinutils (<< 2.33.50.20191128-1~)
Description: Compact C Type Format library (runtime, no BFD dependency)
 This package includes the libctf-nobfd shared library.  The Compact C Type
 Format (CTF) is a way of representing information about a binary program
Homepage: https://www.gnu.org/software/binutils/

Package: libctf0
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 232
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: binutils
Version: 2.40-2
Depends: libbinutils (= 2.40-2), libc6 (>= 2.33), zlib1g (>= 1:1.2.0)
Description: Compact C Type Format library (runtime, BFD dependency)
 This package includes the libctf shared library.  The Compact C Type
 Format (CTF) is a way of representing information about a binary program
Homepage: https://www.gnu.org/software/binutils/

Package: libcups2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 675
Maintainer: Debian Printing Team <debian-printing@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: cups
Version: 2.4.2-3+deb12u9
Depends: libavahi-client3 (>= 0.6.16), libavahi-common3 (>= 0.6.16), libc6 (>= 2.36), libgnutls30 (>= 3.7.5), libgssapi-krb5-2 (>= 1.17), zlib1g (>= 1:1.2.0)
Suggests: cups-common
Description: Common UNIX Printing System(tm) - Core library
 The Common UNIX Printing System (or CUPS(tm)) is a printing system and
 general replacement for lpd and the like.  It supports the Internet
 Printing Protocol (IPP), and has its own filtering driver model for
 handling various document types.
 .
 This package provides the base shared libraries for CUPS.
Homepage: https://github.com/OpenPrinting/cups/

Package: libcurl3-gnutls
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 828
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: amd64
Multi-Arch: same
Source: curl
Version: 7.88.1-10+deb12u15
Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.34), libgnutls30 (>= 3.7.5), libgssapi-krb5-2 (>= 1.17), libidn2-0 (>= 0.6), libldap-2.5-0 (>= 2.5.4), libnettle8, libnghttp2-14 (>= 1.50.0), libpsl5 (>= 0.16.0), librtmp1 (>= 2.3), libssh2-1 (>= 1.7.0), libzstd1 (>= 1.5.2), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Description: easy-to-use client-side URL transfer library (GnuTLS flavour)
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 SSL support is provided by GnuTLS.
Homepage: https://curl.se/

Package: libcurl4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 840
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: amd64
Multi-Arch: same
Source: curl
Version: 7.88.1-10+deb12u15
Replaces: libcurl3
Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.34), libgssapi-krb5-2 (>= 1.17), libidn2-0 (>= 0.6), libldap-2.5-0 (>= 2.5.4), libnghttp2-14 (>= 1.50.0), libpsl5 (>= 0.16.0), librtmp1 (>= 2.3), libssh2-1 (>= 1.7.0), libssl3 (>= 3.0.0), libzstd1 (>= 1.5.2), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Conflicts: libcurl3
Description: easy-to-use client-side URL transfer library (OpenSSL flavour)
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 SSL support is provided by OpenSSL.
Homepage: https://curl.se/

Package: libdatrie1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 82
Maintainer: Theppitak Karoonboonyanan <thep@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libdatrie (0.2.13-2)
Version: 0.2.13-2+b1
Depends: libc6 (>= 2.14)
Description: Double-array trie library
 This package provides shared libraries needed to run programs that use the
 datrie library. It is usually automatically installed.
Homepage: https://linux.thai.net/projects/libthai

Package: libdav1d-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 127
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: dav1d
Version: 1.0.0-2+deb12u1
Depends: libdav1d6 (= 1.0.0-2+deb12u1)
Description: fast and small AV1 video stream decoder (development files)
 dav1d is an AOMedia Video 1 (AV1) cross-platform decoder and focused on speed
 and correctness.
 .
 dav1d supports the following features:
  * support for all features of the AV1 bitstream
  * support for all bitdepth, 8, 10 and 12bits
  * support for all chroma subsamplings 4:2:0, 4:2:2, 4:4:4 and grayscale
  * full acceleration for AVX-2 chips
  * full acceleration for SSSE3+ chips
  * full acceleration for ARMv8 chips
  * partial acceleration for ARMv7 chips
 .
 This package provides the development files for libdav1d.
Homepage: https://www.videolan.org/projects/dav1d.html

Package: libdav1d6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1616
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: dav1d
Version: 1.0.0-2+deb12u1
Depends: libc6 (>= 2.34)
Description: fast and small AV1 video stream decoder (shared library)
 dav1d is an AOMedia Video 1 (AV1) cross-platform decoder and focused on speed
 and correctness.
 .
 dav1d supports the following features:
  * support for all features of the AV1 bitstream
  * support for all bitdepth, 8, 10 and 12bits
  * support for all chroma subsamplings 4:2:0, 4:2:2, 4:4:4 and grayscale
  * full acceleration for AVX-2 chips
  * full acceleration for SSSE3+ chips
  * full acceleration for ARMv8 chips
  * partial acceleration for ARMv7 chips
 .
 This package provides the shared library.
Homepage: https://www.videolan.org/projects/dav1d.html

Package: libdb5.3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1833
Maintainer: Bastian Germann <bage@debian.org>
Architecture: amd64
Multi-Arch: same
Source: db5.3
Version: 5.3.28+dfsg2-1
Depends: libc6 (>= 2.34)
Description: Berkeley v5.3 Database Libraries [runtime]
 This is the runtime package for programs that use the v5.3 Berkeley
 database library.
Homepage: http://www.oracle.com/technetwork/database/database-technologies/berkeleydb/overview/index.html

Package: libdbd-mariadb-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 263
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: libdbd-mariadb-perl (1.22-1)
Version: 1.22-1+b1
Depends: perl (>= 5.36.0-4), perl-dbdabi-94, perlapi-5.36.0, libc6 (>= 2.15), libmariadb3 (>= 3.0.0), libdbi-perl
Description: Perl5 database interface to the MariaDB/MySQL databases
 DBD::MariaDB is a Perl5 Database Interface driver for the MariaDB/MySQL
 databases. In other words: DBD::MariaDB is an interface between the Perl
 programming language and the MariaDB/MySQL programming API that comes with
 the MariaDB/MySQL relational database management systems. Most functions
 provided by this programming API are supported.
 .
 DBD::MariaDB is a fork of DBD::mysql (libdbd-mysql-perl) with inprovements in
 MariaDB compatibility, Perl Unicode support, and some security related bug
 fixes, at the cost of not being 100% backwards compatible.
Homepage: https://metacpan.org/release/DBD-MariaDB

Package: libdbi-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 2154
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Version: 1.643-4+deb12u2
Provides: dh-sequence-perl-dbi, perl-dbdabi-94
Depends: perl (>= 5.36.0-7+deb12u3), perlapi-5.36.0, libc6 (>= 2.4)
Suggests: libclone-perl, libmldbm-perl, libnet-daemon-perl, libsql-statement-perl
Breaks: libdbd-anydata-perl (<< 0.11+)
Description: Perl Database Interface (DBI)
 DBI (DataBase Interface) is a Perl framework that provides a common interface
 to access various backend databases in a uniform manner. DBD (DataBase Driver)
 modules provide implementations for various backend data storage mechanisms
 including networked relational databases (particularly SQL databases) and even
 web services such as the Google search engine.
 .
 It is extremely portable and available for a wide range of operating systems,
 architectures and data stores, including:
 .
  * Oracle
  * Microsoft SQL Server
  * IBM DB2
  * SQLite
  * PostgreSQL
  * Firebird
  * MySQL
Homepage: https://dbi.perl.org/

Package: libdbus-1-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 468
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: dbus
Version: 1.14.10-1~deb12u1
Depends: libc6 (>= 2.34), libsystemd0
Recommends: dbus
Description: simple interprocess messaging system (library)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more. It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML. D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 It comes with several bindings, including GLib, Python, Qt and Java.
 .
 The message bus daemon can be found in the dbus-daemon package.
Homepage: https://dbus.freedesktop.org/

Package: libdc1394-25
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 278
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libdc1394
Version: 2.2.6-4
Depends: libc6 (>= 2.29), libraw1394-11 (>= 2.1.2), libusb-1.0-0 (>= 2:1.0.9)
Description: high level programming interface for IEEE 1394 digital cameras
 libdc1394 is a library that is intended to provide a high level
 programming interface for application developers who wish to control
 IEEE 1394 based cameras that conform to the 1394-based Digital Camera
 Specification (found at http://www.1394ta.org/).
 .
 This version of libdc1394 supports both the old and new (juju) FireWire stack.
 It automatically detects which one to use at runtime.
 .
 This package contains shared libraries.
Homepage: https://sourceforge.net/projects/libdc1394/

Package: libde265-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 470
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libde265
Version: 1.0.11-1+deb12u2
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libstdc++6 (>= 11)
Description: Open H.265 video codec implementation
 libde265 is an open source implementation of the H.265 video codec.
 It is written from scratch in plain C for simplicity and efficiency.
 Its simple API makes it easy to integrate it into other software.
Homepage: https://github.com/strukturag/libde265

Package: libde265-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 47
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libde265
Version: 1.0.11-1+deb12u2
Depends: libde265-0 (= 1.0.11-1+deb12u2)
Description: Open H.265 video codec implementation - development files
 libde265 is an open source implementation of the H.265 video codec.
 It is written from scratch in plain C for simplicity and efficiency.
 Its simple API makes it easy to integrate it into other software.
 .
 The development headers for compiling programs that use libde265
 are provided by this package.
Homepage: https://github.com/strukturag/libde265

Package: libdebconfclient0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 37
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: cdebconf
Version: 0.270
Depends: libc6 (>= 2.4)
Description: Debian Configuration Management System (C-implementation library)
 Debconf is a configuration management system for Debian packages. It is
 used by some packages to prompt you for information before they are
 installed. cdebconf is a reimplementation of the original debconf in C.
 .
 This library allows C programs to interface with cdebconf.

Package: libdecor-0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 62
Maintainer: Debian SDL packages maintainers <pkg-sdl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libdecor-0
Version: 0.1.1-2
Replaces: libdecor
Depends: libc6 (>= 2.34), libwayland-client0 (>= 1.20.0)
Recommends: libdecor-0-plugin-1-cairo | libdecor-0-plugin-1
Conflicts: libdecor
Description: client-side window decoration library
 libdecor is a library that can help Wayland clients draw window
 decorations for them. It aims to provide multiple backends that implements the
 decoration drawing.
 .
 This package contains the runtime library.
Homepage: https://gitlab.freedesktop.org/libdecor/libdecor

Package: libdecor-0-plugin-1-cairo
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 66
Maintainer: Debian SDL packages maintainers <pkg-sdl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libdecor-0
Version: 0.1.1-2
Replaces: libdecor-plugin-cairo
Provides: libdecor-0-plugin-1
Depends: libc6 (>= 2.29), libcairo2 (>= 1.14.0), libdbus-1-3 (>= 1.9.14), libdecor-0-0 (= 0.1.1-2), libglib2.0-0 (>= 2.12.0), libpango-1.0-0 (>= 1.14.0), libpangocairo-1.0-0 (>= 1.14.0), libwayland-client0 (>= 1.20.0), libwayland-cursor0 (>= 1.18)
Conflicts: libdecor-plugin-cairo
Description: default decoration plugin
 libdecor is a library that can help Wayland clients draw window
 decorations for them. It aims to provide multiple backends that implements the
 decoration drawing.
 .
 This package contains a backend that draws window decorations using Cairo.
Homepage: https://gitlab.freedesktop.org/libdecor/libdecor

Package: libdeflate-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 146
Maintainer: Debian Med Packaging Team <debian-med-packaging@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libdeflate
Version: 1.14-1
Depends: libdeflate0 (= 1.14-1)
Description: headers for whole-buffer compression and decompression library
 The supported formats are:
  * DEFLATE (raw)
  * zlib (a.k.a. DEFLATE with a zlib wrapper)
  * gzip (a.k.a. DEFLATE with a gzip wrapper)
 .
 libdeflate is heavily optimized. It is significantly faster than the zlib
 library, both for compression and decompression, and especially on x86
 processors. In addition, libdeflate provides optional high compression modes
 that provide a better compression ratio than the zlib's "level 9".
 .
 This package provides the development headers.
Homepage: https://github.com/ebiggers/libdeflate

Package: libdeflate0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 161
Maintainer: Debian Med Packaging Team <debian-med-packaging@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libdeflate
Version: 1.14-1
Depends: libc6 (>= 2.14)
Description: fast, whole-buffer DEFLATE-based compression and decompression
 The supported formats are:
  * DEFLATE (raw)
  * zlib (a.k.a. DEFLATE with a zlib wrapper)
  * gzip (a.k.a. DEFLATE with a gzip wrapper)
 .
 libdeflate is heavily optimized. It is significantly faster than the zlib
 library, both for compression and decompression, and especially on x86
 processors. In addition, libdeflate provides optional high compression modes
 that provide a better compression ratio than the zlib's "level 9".
Homepage: https://github.com/ebiggers/libdeflate

Package: libdevmapper1.02.1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 474
Maintainer: Debian LVM Team <team+lvm@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: lvm2 (2.03.16-2)
Version: 2:1.02.185-2
Depends: libc6 (>= 2.33), libselinux1 (>= 3.1~), libudev1 (>= 183), dmsetup (>= 2:1.02.185-2~)
Description: Linux Kernel Device Mapper userspace library
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but software raid,
 and other drivers that create "virtual" block devices.
 .
 This package contains the (user-space) shared library for accessing the
 device-mapper; it allows usage of the device-mapper through a clean,
 consistent interface (as opposed to through kernel ioctls).
Homepage: https://sourceware.org/lvm2/

Package: libdjvulibre-text
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 340
Maintainer: Barak A. Pearlmutter <bap@debian.org>
Architecture: all
Multi-Arch: foreign
Source: djvulibre
Version: 3.5.28-2.2~deb12u1
Replaces: djview3 (= 3.5.20-9), djvulibre-desktop (<< 3.5.20-9), libdjvulibre15
Description: Linguistic support files for libdjvulibre
 Runtime linguistic support files for the libdjvulibre library.
Homepage: http://djvu.sourceforge.net/

Package: libdjvulibre21
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1737
Maintainer: Barak A. Pearlmutter <bap@debian.org>
Architecture: amd64
Multi-Arch: same
Source: djvulibre
Version: 3.5.28-2.2~deb12u1
Replaces: libdjvulibre1, libdjvulibre15
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libjpeg62-turbo (>= 1.3.1), libstdc++6 (>= 5), libdjvulibre-text (>= 3.5.28-2.2~deb12u1)
Conflicts: libdjvulibre1
Description: Runtime support for the DjVu image format
 DjVu runtime library.
Homepage: http://djvu.sourceforge.net/

Package: libdpkg-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 1987
Maintainer: Dpkg Developers <debian-dpkg@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: dpkg
Version: 1.21.23
Depends: perl:any, dpkg (>= 1.18.11)
Recommends: libfile-fcntllock-perl, liblocale-gettext-perl, bzip2, xz-utils (>= 5.4.0)
Suggests: debian-keyring, gnupg | sq | sqop | pgpainless-cli, gpgv | sq | sqop | pgpainless-cli, gcc | c-compiler, binutils, patch, sensible-utils, git, bzr
Breaks: dgit (<< 3.13~), libsop-java-java (<< 4.0.7~), pgpainless-cli (<< 1.3.13~), pkg-kde-tools (<< 0.15.28~), sq (<< 0.25.0~), sqop (<< 0.27.2~)
Description: Dpkg perl modules
 This package provides the perl modules used by the scripts
 in dpkg-dev. They cover a wide range of functionality. Among them
 there are the following public modules:
 .
  - Dpkg: core variables
  - Dpkg::Arch: architecture handling functions
  - Dpkg::BuildFlags: set, modify and query compilation build flags
  - Dpkg::BuildInfo: build information functions
  - Dpkg::BuildOptions: parse and manipulate DEB_BUILD_OPTIONS
  - Dpkg::BuildProfiles: parse and manipulate build profiles
  - Dpkg::Changelog: parse changelogs
  - Dpkg::Changelog::Entry: represents a changelog entry
  - Dpkg::Changelog::Parse: generic changelog parser for dpkg-parsechangelog
  - Dpkg::Checksums: generate and parse checksums
  - Dpkg::Compression: simple database of available compression methods
  - Dpkg::Compression::FileHandle: transparently (de)compress files
  - Dpkg::Compression::Process: wrapper around compression tools
  - Dpkg::Conf: parse dpkg configuration files
  - Dpkg::Control: parse and manipulate Debian control information
    (.dsc, .changes, Packages/Sources entries, etc.)
  - Dpkg::Control::Changelog: represent fields output by dpkg-parsechangelog
  - Dpkg::Control::Fields: manage (list of known) control fields
  - Dpkg::Control::Hash: parse and manipulate a block of RFC822-like fields
  - Dpkg::Control::Info: parse files like debian/control
  - Dpkg::Control::Tests: parse files like debian/tests/control
  - Dpkg::Control::Tests::Entry: represents a debian/tests/control stanza
  - Dpkg::Deps: parse and manipulate dependencies
  - Dpkg::Deps::Simple: represents a single dependency statement
  - Dpkg::Deps::Multiple: base module to represent multiple dependencies
  - Dpkg::Deps::Union: list of unrelated dependencies
  - Dpkg::Deps::AND: list of AND dependencies
  - Dpkg::Deps::OR: list of OR dependencies
  - Dpkg::Deps::KnownFacts: list of installed and virtual packages
  - Dpkg::Exit: push, pop and run exit handlers
  - Dpkg::Gettext: wrapper around Locale::gettext
  - Dpkg::IPC: spawn sub-processes and feed/retrieve data
  - Dpkg::Index: collections of Dpkg::Control (Packages/Sources files for
    example)
  - Dpkg::Interface::Storable: base object serializer
  - Dpkg::Path: common path handling functions
  - Dpkg::Source::Format: manipulate debian/source/format files
  - Dpkg::Source::Package: extract Debian source packages
  - Dpkg::Substvars: substitute variables in strings
  - Dpkg::Vendor: identify current distribution vendor
  - Dpkg::Version: parse and manipulate Debian package versions
 .
 All the packages listed in Suggests or Recommends are used by some of the
 modules.
Homepage: https://wiki.debian.org/Teams/Dpkg

Package: libdrm-amdgpu1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 76
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libdrm (2.4.114-1)
Version: 2.4.114-1+b1
Depends: libc6 (>= 2.34), libdrm2 (>= 2.4.108)
Description: Userspace interface to amdgpu-specific kernel DRM services -- runtime
 This library implements the userspace interface to the kernel DRM
 services.  DRM stands for "Direct Rendering Manager", which is the
 kernelspace portion of the "Direct Rendering Infrastructure" (DRI).
 The DRI is currently used on Linux to provide hardware-accelerated
 OpenGL drivers.
Homepage: https://cgit.freedesktop.org/mesa/drm/

Package: libdrm-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 42
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: libdrm
Version: 2.4.114-1
Description: Userspace interface to kernel DRM services -- common files
 This library implements the userspace interface to the kernel DRM
 services.  DRM stands for "Direct Rendering Manager", which is the
 kernelspace portion of the "Direct Rendering Infrastructure" (DRI).
 The DRI is currently used on Linux to provide hardware-accelerated
 OpenGL drivers.
 .
 This package provides common files for libdrm.
Homepage: https://cgit.freedesktop.org/mesa/drm/

Package: libdrm-intel1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 178
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libdrm (2.4.114-1)
Version: 2.4.114-1+b1
Depends: libc6 (>= 2.34), libdrm2 (>= 2.4.108), libpciaccess0
Description: Userspace interface to intel-specific kernel DRM services -- runtime
 This library implements the userspace interface to the kernel DRM
 services.  DRM stands for "Direct Rendering Manager", which is the
 kernelspace portion of the "Direct Rendering Infrastructure" (DRI).
 The DRI is currently used on Linux to provide hardware-accelerated
 OpenGL drivers.
Homepage: https://cgit.freedesktop.org/mesa/drm/

Package: libdrm-nouveau2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 74
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libdrm (2.4.114-1)
Version: 2.4.114-1+b1
Depends: libc6 (>= 2.14), libdrm2 (>= 2.4.108)
Description: Userspace interface to nouveau-specific kernel DRM services -- runtime
 This library implements the userspace interface to the kernel DRM
 services.  DRM stands for "Direct Rendering Manager", which is the
 kernelspace portion of the "Direct Rendering Infrastructure" (DRI).
 The DRI is currently used on Linux to provide hardware-accelerated
 OpenGL drivers.
Homepage: https://cgit.freedesktop.org/mesa/drm/

Package: libdrm-radeon1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 83
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libdrm (2.4.114-1)
Version: 2.4.114-1+b1
Depends: libc6 (>= 2.4), libdrm2 (>= 2.4.108)
Description: Userspace interface to radeon-specific kernel DRM services -- runtime
 This library implements the userspace interface to the kernel DRM
 services.  DRM stands for "Direct Rendering Manager", which is the
 kernelspace portion of the "Direct Rendering Infrastructure" (DRI).
 The DRI is currently used on Linux to provide hardware-accelerated
 OpenGL drivers.
Homepage: https://cgit.freedesktop.org/mesa/drm/

Package: libdrm2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 121
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libdrm (2.4.114-1)
Version: 2.4.114-1+b1
Depends: libdrm-common (>= 2.4.114-1), libc6 (>= 2.33)
Description: Userspace interface to kernel DRM services -- runtime
 This library implements the userspace interface to the kernel DRM
 services.  DRM stands for "Direct Rendering Manager", which is the
 kernelspace portion of the "Direct Rendering Infrastructure" (DRI).
 The DRI is currently used on Linux to provide hardware-accelerated
 OpenGL drivers.
 .
 This package provides the runtime environment for libdrm.
Homepage: https://cgit.freedesktop.org/mesa/drm/

Package: libduktape207
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 314
Maintainer: Debian IoT Maintainers <debian-iot-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: duktape
Version: 2.7.0-2
Depends: libc6 (>= 2.29)
Description: embeddable Javascript engine, library
 Duktape is an embeddable Javascript engine, with a focus on portability
 and compact footprint.
 .
 Duktape is easy to integrate into a C/C++ project: add duktape.c, duktape.h,
 and duk_config.h to your build, and use the Duktape API to call Ecmascript
 functions from C code and vice versa.
 .
 This package contains the shared library.
Homepage: https://duktape.org

Package: libedit2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 258
Maintainer: LLVM Packaging Team <pkg-llvm-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libedit
Version: 3.1-20221030-2
Replaces: libedit-dev (<< 3.1-20180525-2~)
Depends: libbsd0 (>= 0.1.3), libc6 (>= 2.33), libtinfo6 (>= 6)
Description: BSD editline and history libraries
 Command line editor library provides generic line editing,
 history, and tokenization functions.
 .
 It slightly resembles GNU readline.
Homepage: https://www.thrysoee.dk/editline/

Package: libefiboot1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 117
Maintainer: Debian UEFI Maintainers <debian-efi@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: efivar
Version: 37-6
Depends: libc6 (>= 2.14), libefivar1 (>= 37)
Breaks: efibootmgr (<< 0.12-2)
Description: Library to manage UEFI variables
 Library to allow for the manipulation of UEFI variables related to booting.
Homepage: https://github.com/rhinstaller/efivar

Package: libefivar1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 170
Maintainer: Debian UEFI Maintainers <debian-efi@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: efivar
Version: 37-6
Depends: libc6 (>= 2.14)
Breaks: efibootmgr (<< 0.12-2)
Description: Library to manage UEFI variables
 Library to allow for the simple manipulation of UEFI variables.
Homepage: https://github.com/rhinstaller/efivar

Package: libelf1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1036
Maintainer: Debian Elfutils Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: elfutils
Version: 0.188-2.1
Depends: libc6 (>= 2.34), zlib1g (>= 1:1.1.4)
Description: library to read and write ELF files
 The libelf1 package provides a shared library which allows reading and
 writing ELF files on a high level.  Third party programs depend on
 this package to read internals of ELF files.  The programs of the
 elfutils package use it also to generate new ELF files.
 .
 This library is part of elfutils.
Homepage: https://sourceware.org/elfutils/

Package: libencode-locale-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 33
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.05-3
Depends: perl:any
Description: utility to determine the locale encoding
 In many applications it's wise to let Perl use Unicode for the strings it
 processes. Most of the interfaces Perl has to the outside world are still byte
 based. Programs therefore need to decode byte strings that enter the program
 from the outside and encode them again on the way out.
 .
 The POSIX locale system is used to specify both the language conventions
 requested by the user and the preferred character set to consume and output.
 The Encode::Locale module looks up the charset and encoding (called a CODESET
 in the locale jargon) and arranges for the Encode module to know this encoding
 under the name "locale". It means bytes obtained from the environment can be
 converted to Unicode strings by calling Encode::encode(locale => $bytes) and
 converted back again with Encode::decode(locale => $string).
Homepage: https://metacpan.org/release/Encode-Locale

Package: libepoxy0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1356
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libepoxy
Version: 1.5.10-1
Depends: libc6 (>= 2.7)
Description: OpenGL function pointer management library
 It hides the complexity of dlopen(), dlsym(), glXGetProcAddress(),
 eglGetProcAddress(), etc. from the app developer, with very little
 knowledge needed on their part.  They get to read GL specs and write
 code using undecorated function names like glCompileShader().
Homepage: https://github.com/anholt/libepoxy

Package: liberror-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 73
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.17029-2
Depends: perl:any
Description: Perl module for error/exception handling in an OO-ish way
 The Error module provides two interfaces.  Firstly "Error" provides a
 procedural interface to exception handling. Secondly "Error" is a base class
 for errors/exceptions that can either be thrown, for subsequent catch, or can
 simply be recorded.
 .
 Errors in the class "Error" should not be thrown directly, but the user
 should throw errors from a sub-class of "Error".
 .
 Warning: Using the "Error" module is no longer recommended due to the
 black-magical nature of its syntactic sugar, which often tends to break. Its
 maintainers have stopped actively writing code that uses it, and discourage
 people from doing so.
 .
 Recommended alternatives are Exception::Class (libexception-class-perl),
 Error::Exception (not packaged), TryCatch (libtrycatch-perl), and Try::Tiny
 (libtry-tiny-perl).
Homepage: https://metacpan.org/release/Error

Package: libevent-2.1-7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 435
Maintainer: Nicolas Mora <babelouest@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libevent
Version: 2.1.12-stable-8
Depends: libc6 (>= 2.36)
Description: Asynchronous event notification library
 Libevent is an asynchronous event notification library that provides a
 mechanism to execute a callback function when a specific event occurs
 on a file descriptor or after a timeout has been reached.
 .
 It is meant to replace the asynchronous event loop found in
 event driven network servers. Currently, libevent supports /dev/poll,
 kqueue(2), event ports, select(2), poll(2) and epoll(4).
 .
 For backward compatibility and to transition to "libevent_core only"
 or "libevent_core + libevent_extra", the libevent source package builds
 the libevent library that includes everything in libevent_core and
 libevent_extra.
Homepage: https://libevent.org/

Package: libevent-core-2.1-7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 302
Maintainer: Nicolas Mora <babelouest@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libevent
Version: 2.1.12-stable-8
Depends: libc6 (>= 2.36)
Description: Asynchronous event notification library (core)
 Libevent is an asynchronous event notification library that provides a
 mechanism to execute a callback function when a specific event occurs
 on a file descriptor or after a timeout has been reached.
 .
 It is meant to replace the asynchronous event loop found in
 event driven network servers. Currently, libevent supports /dev/poll,
 kqueue(2), event ports, select(2), poll(2) and epoll(4).
 .
 The libevent_core library includes event loops, timers, buffer code,
 and various small compatibility functions.
 .
 If you're writing software that only uses libevent's event loop, you
 should link against only the libevent_core library.
Homepage: https://libevent.org/

Package: libexpat1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 396
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: expat
Version: 2.5.0-1+deb12u3
Depends: libc6 (>= 2.36)
Description: XML parsing C library - runtime library
 This package contains the runtime, shared library of expat, the C
 library for parsing XML. Expat is a stream-oriented parser in
 which an application registers handlers for things the parser
 might find in the XML document (like start tags).
Homepage: https://libexpat.github.io/

Package: libext2fs2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 535
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs (1.47.0-2)
Version: 1.47.0-2+b2
Replaces: e2fslibs (<< 1.43.9-1~)
Provides: e2fslibs (= 1.47.0-2+b2)
Depends: libc6 (>= 2.34)
Breaks: e2fslibs (<< 1.43.9-1~)
Description: ext2/ext3/ext4 file system libraries
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package provides the ext2fs and e2p libraries, for userspace software
 that directly accesses extended file systems. Programs that use libext2fs
 include e2fsck, mke2fs, and tune2fs. Programs that use libe2p include
 dumpe2fs, chattr, and lsattr.
Homepage: http://e2fsprogs.sourceforge.net

Package: libfakeroot
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 144
Maintainer: Clint Adams <clint@debian.org>
Architecture: amd64
Multi-Arch: same
Source: fakeroot
Version: 1.31-1.2
Replaces: fakeroot (<< 1.20-2~)
Depends: libc6 (>= 2.34)
Breaks: fakeroot (<< 1.20-2~)
Conffiles:
 /etc/ld.so.conf.d/fakeroot-x86_64-linux-gnu.conf f9f2331782e9078d5472c77e1d9cd869
Description: tool for simulating superuser privileges - shared libraries
 fakeroot provides a fake "root environment" by means of LD_PRELOAD and
 SysV IPC (or TCP) trickery. It puts wrappers around getuid(), chown(),
 stat(), and other file-manipulation functions, so that unprivileged
 users can (for instance) populate .deb archives with root-owned files;
 various build tools use fakeroot for this by default.
 .
 This package contains the LD_PRELOAD libraries.

Package: libfcgi-bin
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 34
Maintainer: Boris Pek <tehnick@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: libfcgi
Version: 2.4.2-2+deb12u1
Replaces: libfcgi0ldbl (<< 2.4.0-8.4)
Depends: libc6 (>= 2.34), libfcgi0ldbl (>= 2.4.2)
Breaks: libfcgi0ldbl (<< 2.4.0-8.4)
Description: FastCGI bridge from CGI
 FastCGI is a language independent, scalable, open extension
 to CGI that provides high performance without the limitations
 of server specific APIs.
 .
 This package contains the cgi-fcgi utility to bridge between CGI
 and FastCGI.
Homepage: https://github.com/FastCGI-Archives

Package: libfcgi-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 74
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Version: 0.82+ds-2
Depends: perl (>= 5.36.0-4), perlapi-5.36.0, libc6 (>= 2.4), libfcgi0ldbl (>= 2.4.2)
Description: helper module for FastCGI
 FCGI is a simple Perl module for writing FastCGI applications. FastCGI is a
 language-independent, scalable, open extension to CGI that provides faster
 performance by keeping programs persistent in memory and allowing them to
 handle multiple requests. This module provides the core interface needed to
 write these applications.
 .
 For complex applications, you should consider a more full-featured solution
 such as Plack or Catalyst (see libcatalyst-perl).
Homepage: https://metacpan.org/release/FCGI

Package: libfcgi0ldbl
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 85
Maintainer: Boris Pek <tehnick@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libfcgi
Version: 2.4.2-2+deb12u1
Replaces: libfcgi0, libfcgi0c2
Provides: libfcgi
Depends: libc6 (>= 2.15), libgcc-s1 (>= 3.0), libstdc++6 (>= 5)
Recommends: libfcgi-bin (= 2.4.2-2+deb12u1)
Conflicts: libfcgi0, libfcgi0c2
Description: shared library of FastCGI
 FastCGI is a language independent, scalable, open extension
 to CGI that provides high performance without the limitations
 of server specific APIs.
 .
 This package contains the shared libraries.
Homepage: https://github.com/FastCGI-Archives

Package: libfdisk1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 533
Maintainer: util-linux packagers <util-linux@packages.debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.38.1-5+deb12u3
Depends: libblkid1 (>= 2.24.2), libc6 (>= 2.33), libuuid1 (>= 2.16)
Description: fdisk partitioning library
 The libfdisk library is used for manipulating partition tables. It is
 the core of the fdisk, cfdisk, and sfdisk tools.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/

Package: libffi8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 68
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libffi
Version: 3.4.4-1
Replaces: libffi8ubuntu1 (<< 3.4.2-1)
Provides: libffi8ubuntu1 (= 3.4.4-1)
Depends: libc6 (>= 2.34)
Breaks: libffi8ubuntu1 (<< 3.4.2-1)
Description: Foreign Function Interface library runtime
 A foreign function interface is the popular name for the interface that
 allows code written in one language to call code written in another
 language.
Homepage: https://sourceware.org/libffi/

Package: libfftw3-bin
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 258
Maintainer: Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: fftw3
Version: 3.3.10-1
Depends: libc6 (>= 2.34), libfftw3-double3 (>= 3.3.10), libfftw3-long3 (>= 3.3.10), libfftw3-quad3 (>= 3.3.10), libfftw3-single3 (>= 3.3.10)
Description: Library for computing Fast Fourier Transforms - Tools
 The FFTW library computes Fast Fourier Transforms (FFT) in one or more
 dimensions. It is extremely fast.
 .
 This package contains the wisdom management tools.
Homepage: https://fftw.org

Package: libfftw3-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 15462
Maintainer: Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: fftw3
Version: 3.3.10-1
Depends: libfftw3-bin (= 3.3.10-1), libfftw3-double3 (= 3.3.10-1), libfftw3-long3 (= 3.3.10-1), libfftw3-quad3 (= 3.3.10-1), libfftw3-single3 (= 3.3.10-1)
Suggests: libfftw3-doc
Description: Library for computing Fast Fourier Transforms - development
 The FFTW library computes Fast Fourier Transforms (FFT) in one or more
 dimensions. It is extremely fast. This package contains the statically linked
 library, header files and test programs.
 .
 This package contains the header files and static libraries.
 For documentation, see libfftw3-doc.
Homepage: https://fftw.org

Package: libfftw3-double3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2259
Maintainer: Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: fftw3
Version: 3.3.10-1
Depends: libc6 (>= 2.34), libgomp1 (>= 4.9)
Suggests: libfftw3-bin, libfftw3-dev
Description: Library for computing Fast Fourier Transforms - Double precision
 The FFTW library computes Fast Fourier Transforms (FFT) in one or more
 dimensions. It is extremely fast. This package contains the shared library
 for double precision transforms.
 .
 To get the static library and the header files, you need to install
 libfftw3-dev. For documentation, see libfftw3-doc.
Homepage: https://fftw.org

Package: libfftw3-long3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1075
Maintainer: Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: fftw3
Version: 3.3.10-1
Depends: libc6 (>= 2.34), libgomp1 (>= 4.9)
Suggests: libfftw3-bin, libfftw3-dev
Description: Library for computing Fast Fourier Transforms - Long precision
 The FFTW library computes Fast Fourier Transforms (FFT) in one or more
 dimensions. It is extremely fast. This package contains the shared library
 for long double precision transforms.
 .
 To get the static library and the header files, you need to install
 libfftw3-dev. For documentation, see libfftw3-doc.
Homepage: https://fftw.org

Package: libfftw3-quad3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2123
Maintainer: Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: fftw3
Version: 3.3.10-1
Depends: libc6 (>= 2.34), libgomp1 (>= 4.9), libquadmath0 (>= 4.6)
Suggests: libfftw3-bin, libfftw3-dev
Description: Library for computing Fast Fourier Transforms - Quad precision
 The FFTW library computes Fast Fourier Transforms (FFT) in one or more
 dimensions. It is extremely fast. This package contains the shared library
 for quad precision transforms.
 .
 To get the static library and the header files, you need to install
 libfftw3-dev. For documentation, see libfftw3-doc.
Homepage: https://fftw.org

Package: libfftw3-single3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2355
Maintainer: Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: fftw3
Version: 3.3.10-1
Depends: libc6 (>= 2.34), libgomp1 (>= 4.9)
Suggests: libfftw3-bin, libfftw3-dev
Description: Library for computing Fast Fourier Transforms - Single precision
 The FFTW library computes Fast Fourier Transforms (FFT) in one or more
 dimensions. It is extremely fast. This package contains the shared library
 for single precision transforms.
 .
 To get the static library and the header files, you need to install
 libfftw3-dev. For documentation, see libfftw3-doc.
Homepage: https://fftw.org

Package: libfido2-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 241
Maintainer: Debian Authentication Maintainers <pkg-auth-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libfido2 (1.12.0-2)
Version: 1.12.0-2+b1
Depends: libc6 (>= 2.36), libcbor0.8 (>= 0.8.0), libssl3 (>= 3.0.0), libudev1 (>= 183), zlib1g (>= 1:1.1.4)
Description: library for generating and verifying FIDO 2.0 objects
 A library for communicating with a FIDO device over USB or NFC, and for
 verifying attestation and assertion signatures. FIDO U2F (CTAP 1) and FIDO
 2.0 (CTAP 2) are supported.
 .
 This package contains the library.
Homepage: https://developers.yubico.com/libfido2/

Package: libfile-fcntllock-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 129
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: libfile-fcntllock-perl (0.22-4)
Version: 0.22-4+b1
Depends: perl (>= 5.36.0-4), perlapi-5.36.0, libc6 (>= 2.28)
Suggests: gcc | c-compiler
Description: Perl module for file locking with fcntl(2)
 File::FcntlLock is a Perl module to do file locking in an object oriented
 fashion using the fcntl(2) system call. This allows locks on parts of a file
 as well as on the whole file and overcomes some known problems with flock(2),
 on which Perl's flock() function is based.
 .
 Furthermore due to its design it supports reliable locking over NFS.
Homepage: https://metacpan.org/release/File-FcntlLock

Package: libflac12
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 458
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: flac
Version: 1.4.2+ds-2
Depends: libc6 (>= 2.33), libogg0 (>= 1.0rc3)
Description: Free Lossless Audio Codec - runtime C library
 FLAC stands for Free Lossless Audio Codec. Grossly oversimplified, FLAC is
 similar to MP3, but lossless.  The FLAC project consists of:
 .
  * The stream format
  * libFLAC, which implements a reference encoder, stream decoder, and file
    decoder
  * flac, which is a command-line wrapper around libFLAC to encode and decode
    .flac files
  * Input plugins for various music players (Winamp, XMMS, and more in the
    works)
 .
 This package contains the runtime library libFLAC.
Homepage: https://xiph.org/flac/

Package: libflite1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 27554
Maintainer: Debian Accessibility Team <pkg-a11y-devel@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: same
Source: flite
Version: 2.2-5
Depends: libasound2 (>= 1.0.16), libc6 (>= 2.33)
Description: Small run-time speech synthesis engine - shared libraries
 Flite is a small fast run-time speech synthesis engine.  It is the
 latest addition to the suite of free software synthesis tools
 including University of Edinburgh's Festival Speech Synthesis System
 and Carnegie Mellon University's FestVox project, tools, scripts and
 documentation for building synthetic voices.  However, flite itself
 does not require either of these systems to run.
 .
 It currently only supports the English and Indic languages.
 .
 This package contains the shared library objects of Festival Lite
Homepage: http://cmuflite.org

Package: libfontconfig1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 579
Maintainer: Debian freedesktop.org maintainers <pkg-freedesktop-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: fontconfig
Version: 2.14.1-4
Provides: libfontconfig
Depends: libc6 (>= 2.33), libexpat1 (>= 2.0.1), libfreetype6 (>= 2.9.1), fontconfig-config (>= 2.14.1-4)
Breaks: xpdf (<= 3.03-11)
Description: generic font configuration library - runtime
 Fontconfig is a font configuration and customization library, which
 does not depend on the X Window System. It is designed to locate
 fonts within the system and select them according to requirements
 specified by applications.
 .
 This package contains the runtime library needed to launch applications
 using fontconfig.
Homepage: https://www.freedesktop.org/wiki/Software/fontconfig/

Package: libfontenc1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 60
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libfontenc
Version: 1:1.1.4-1
Depends: libc6 (>= 2.14), zlib1g (>= 1:1.1.4)
Description: X11 font encoding library
 libfontenc is a library which helps font libraries portably determine
 and deal with different encodings of fonts.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libfontenc

Package: libfreetype-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2060
Maintainer: Hugh McMaster <hugh.mcmaster@outlook.com>
Architecture: amd64
Multi-Arch: same
Source: freetype
Version: 2.12.1+dfsg-5+deb12u4
Replaces: libfreetype6-dev (<< 2.10.1)
Provides: libfreetype6-dev (= 2.12.1+dfsg-5+deb12u4)
Depends: libfreetype6 (= 2.12.1+dfsg-5+deb12u4), libbrotli-dev, libc6-dev | libc-dev, libpng-dev, zlib1g-dev | libz-dev
Suggests: freetype2-doc (= 2.12.1+dfsg-5+deb12u4)
Breaks: libfreetype6-dev (<< 2.10.1)
Description: FreeType 2 font engine, development files
 The FreeType project is a team of volunteers who develop free,
 portable and high-quality software solutions for digital typography.
 They specifically target embedded systems and focus on providing small,
 efficient and ubiquitous products.
 .
 This package contains all of the supplementary files you need to develop your
 own programs using the FreeType 2 library.
Homepage: https://freetype.org

Package: libfreetype6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 886
Maintainer: Hugh McMaster <hugh.mcmaster@outlook.com>
Architecture: amd64
Multi-Arch: same
Source: freetype
Version: 2.12.1+dfsg-5+deb12u4
Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.33), libpng16-16 (>= 1.6.2-1), zlib1g (>= 1:1.1.4)
Description: FreeType 2 font engine, shared library files
 The FreeType project is a team of volunteers who develop free,
 portable and high-quality software solutions for digital typography.
 They specifically target embedded systems and focus on providing small,
 efficient and ubiquitous products.
 .
 The FreeType 2 library is their new software font engine.  It has been
 designed to provide the following important features:
  * A universal and simple API to manage font files
  * Support for several font formats through loadable modules
  * High-quality anti-aliasing
  * High portability & performance
 .
 Supported font formats include:
  * TrueType files (.ttf) and collections (.ttc)
  * Type 1 font files both in ASCII (.pfa) or binary (.pfb) format
  * Type 1 Multiple Master fonts.  The FreeType 2 API also provides
    routines to manage design instances easily
  * Type 1 CID-keyed fonts
  * OpenType/CFF (.otf) fonts
  * CFF/Type 2 fonts
  * Adobe CEF fonts (.cef), used to embed fonts in SVG documents with
    the Adobe SVG viewer plugin.
  * Windows FNT/FON bitmap fonts
 .
 This package contains the files needed to run programs that use the
 FreeType 2 library.
Homepage: https://freetype.org

Package: libfreetype6-dev
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 69
Maintainer: Hugh McMaster <hugh.mcmaster@outlook.com>
Architecture: amd64
Multi-Arch: same
Source: freetype
Version: 2.12.1+dfsg-5+deb12u4
Depends: libfreetype-dev (= 2.12.1+dfsg-5+deb12u4)
Description: FreeType 2 font engine, development files (transitional package)
 The FreeType project is a team of volunteers who develop free,
 portable and high-quality software solutions for digital typography.
 They specifically target embedded systems and focus on providing small,
 efficient and ubiquitous products.
 .
 This package contains all of the supplementary files you need to develop your
 own programs using the FreeType 2 library.
 .
 This is a transitional package. It can safely be removed.
Homepage: https://freetype.org

Package: libfribidi0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 172
Maintainer: Debian Hebrew Packaging Team <team+hebrew@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: fribidi
Version: 1.0.8-2.1
Depends: libc6 (>= 2.3.4)
Description: Free Implementation of the Unicode BiDi algorithm
 FriBiDi is a BiDi algorithm implementation for Hebrew and/or Arabic
 languages.
 This package contains the shared libraries.
Homepage: http://www.fribidi.org/

Package: libfstrm0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 70
Maintainer: Robert Edmonds <edmonds@debian.org>
Architecture: amd64
Multi-Arch: same
Source: fstrm
Version: 0.6.1-1
Depends: libc6 (>= 2.32)
Description: Frame Streams (fstrm) library
 Frame Streams is a light weight, binary clean protocol that allows for the
 transport of arbitrarily encoded data payload sequences with minimal framing
 overhead -- just four bytes per data frame. Frame Streams does not specify an
 encoding format for data frames and can be used with any data serialization
 format that produces byte sequences, such as Protocol Buffers, XML, JSON,
 MessagePack, YAML, etc. Frame Streams can be used as both a streaming
 transport over a reliable byte stream socket (TCP sockets, TLS connections,
 AF_UNIX sockets, etc.) for data in motion as well as a file format for data
 at rest. A "Content Type" header identifies the type of payload being carried
 over an individual Frame Stream and allows cooperating programs to determine
 how to interpret a given sequence of data payloads.
 .
 This is the "fstrm" implementation of Frame Streams in C.
 .
 This package contains the shared library.
Homepage: https://github.com/farsightsec/fstrm

Package: libfuse2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 345
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: fuse (2.9.9-6)
Version: 2.9.9-6+b1
Depends: libc6 (>= 2.34)
Suggests: fuse
Conflicts: fuse (<< 2.9.9-6+b1)
Description: Filesystem in Userspace (library)
 Filesystem in Userspace (FUSE) is a simple interface for userspace programs to
 export a virtual filesystem to the Linux kernel. It also aims to provide a
 secure method for non privileged users to create and mount their own filesystem
 implementations.
 .
 This package contains the shared library.
Homepage: https://github.com/libfuse/libfuse/wiki

Package: libfuse3-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 305
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: fuse3
Version: 3.14.0-4
Depends: libc6 (>= 2.34)
Suggests: fuse3
Description: Filesystem in Userspace (library) (3.x version)
 Filesystem in Userspace (FUSE) is a simple interface for userspace programs to
 export a virtual filesystem to the Linux kernel. It also aims to provide a
 secure method for non privileged users to create and mount their own filesystem
 implementations.
 .
 This package contains the shared library.
Homepage: https://github.com/libfuse/libfuse/wiki

Package: libgav1-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 945
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libgav1 (0.18.0-1)
Version: 0.18.0-1+b1
Depends: libabsl20220623 (>= 0~20220623.0-1), libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 12)
Description: AV1 decoder developed by Google -- runtime library
 This package contains the runtime, shared library of gav1. Gav1 is
 a new decoder implementation for AV1 video encoding format (supporting
 profiles 0 and 1).
Homepage: https://chromium.googlesource.com/codecs/libgav1/

Package: libgbm1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 107
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: mesa
Version: 22.3.6-1+deb12u2
Depends: libc6 (>= 2.34), libdrm2 (>= 2.4.75), libexpat1 (>= 2.0.1), libwayland-server0 (>= 1.15.0)
Description: generic buffer management API -- runtime
 This package contains the GBM buffer management library.  It provides a
 mechanism for allocating buffers for graphics rendering tied to Mesa.
 .
 GBM is intended to be used as a native platform for EGL on drm or openwfd.
Homepage: https://mesa3d.org/

Package: libgcc-12-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 14284
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.2.0-14+deb12u1
Replaces: libtsan2 (<< 12-20211113-2~)
Depends: gcc-12-base (= 12.2.0-14+deb12u1), libgcc-s1 (>= 12.2.0-14+deb12u1), libgomp1 (>= 12.2.0-14+deb12u1), libitm1 (>= 12.2.0-14+deb12u1), libatomic1 (>= 12.2.0-14+deb12u1), libasan8 (>= 12.2.0-14+deb12u1), liblsan0 (>= 12.2.0-14+deb12u1), libtsan2 (>= 12.2.0-14+deb12u1), libubsan1 (>= 12.2.0-14+deb12u1), libquadmath0 (>= 12.2.0-14+deb12u1)
Recommends: libc6-dev (>= 2.23-1~)
Breaks: libtsan2 (<< 12-20211113-2~)
Description: GCC support library (development files)
 This package contains the headers and static library files necessary for
 building C programs which use libgcc, libgomp, libquadmath, libssp or libitm.
Homepage: http://gcc.gnu.org/

Package: libgcc-s1
Protected: yes
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 140
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.2.0-14+deb12u1
Replaces: libgcc1 (<< 1:10)
Provides: libgcc1 (= 1:12.2.0-14+deb12u1)
Depends: gcc-12-base (= 12.2.0-14+deb12u1), libc6 (>= 2.35)
Description: GCC support library
 Shared version of the support library, a library of internal subroutines
 that GCC uses to overcome shortcomings of particular machines, or
 special needs for some languages.
Homepage: http://gcc.gnu.org/
Important: yes

Package: libgcrypt20
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1592
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Version: 1.10.1-3+deb12u1
Depends: libc6 (>= 2.34), libgpg-error0 (>= 1.27)
Suggests: rng-tools
Description: LGPL Crypto library - runtime library
 libgcrypt contains cryptographic functions.  Many important free
 ciphers, hash algorithms and public key signing algorithms have been
 implemented:
 .
 Arcfour, Blowfish, CAST5, DES, AES, Twofish, Serpent, rfc2268 (rc2), SEED,
 Poly1305, Camellia, ChaCha20, IDEA, Salsa, SM4, Blake-2, CRC, MD2, MD4, MD5,
 RIPE-MD160, SM3, SHA-1, SHA-256, SHA-512, SHA3-224, SHA3-256, SHA3-384,
 SHA3-512, SHAKE128, SHAKE256, Tiger, Whirlpool, DSA, DSA2, ElGamal, RSA, ECC
 (Curve25519, sec256k1, GOST R 34.10-2001 and GOST R 34.10-2012, etc.)
Homepage: https://directory.fsf.org/project/libgcrypt/

Package: libgd3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 449
Maintainer: GD Team <team+gd@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libgd2
Version: 2.3.3-9+deb12u1
Depends: libavif15 (>= 0.11.1), libc6 (>= 2.29), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.2.1), libheif1 (>= 1.3.2), libjpeg62-turbo (>= 1.3.1), libpng16-16 (>= 1.6.2-1), libtiff6 (>= 4.0.3), libwebp7 (>= 1.2.4), libxpm4
Suggests: libgd-tools
Description: GD Graphics Library
 GD is a graphics library. It allows your code to quickly draw images
 complete with lines, arcs, text, multiple colours, cut and paste from
 other images, flood fills, and write out the result as a PNG file.
 This is particularly useful in World Wide Web applications, where PNG is
 one of the formats accepted for inline images by most browsers.
 .
 This is the runtime package of the library.
Homepage: http://www.libgd.org/

Package: libgdbm-compat4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 70
Maintainer: Nicolas Mora <babelouest@debian.org>
Architecture: amd64
Multi-Arch: same
Source: gdbm
Version: 1.23-3
Depends: libc6 (>= 2.33), libgdbm6 (>= 1.16)
Description: GNU dbm database routines (legacy support runtime version) 
 GNU dbm ('gdbm') is a library of database functions that use extendible
 hashing and works similarly to the standard UNIX 'dbm' functions.
 .
 The basic use of 'gdbm' is to store key/data pairs in a data file, thus
 providing a persistent version of the 'dictionary' Abstract Data Type
 ('hash' to perl programmers).
 This package includes library files, required to run old programs,
 that use legacy 'dbm' interface. For new programs, please use modern
 interface, provided by libgdbm6 and libgdbm-dev.
Homepage: https://gnu.org/software/gdbm

Package: libgdbm6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 129
Maintainer: Nicolas Mora <babelouest@debian.org>
Architecture: amd64
Multi-Arch: same
Source: gdbm
Version: 1.23-3
Depends: libc6 (>= 2.34)
Suggests: gdbm-l10n (= 1.23-3)
Description: GNU dbm database routines (runtime version) 
 GNU dbm ('gdbm') is a library of database functions that use extendible
 hashing and works similarly to the standard UNIX 'dbm' functions.
 .
 The basic use of 'gdbm' is to store key/data pairs in a data file, thus
 providing a persistent version of the 'dictionary' Abstract Data Type
 ('hash' to perl programmers).
Homepage: https://gnu.org/software/gdbm

Package: libgdk-pixbuf-2.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 477
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gdk-pixbuf
Version: 2.42.10+dfsg-1+deb12u4
Replaces: libgdk-pixbuf2.0-0 (<< 2.40.0+dfsg-6~)
Depends: libgdk-pixbuf2.0-common (>= 2.42.10+dfsg-1+deb12u4), shared-mime-info, libc6 (>= 2.34), libglib2.0-0 (>= 2.59.0), libjpeg62-turbo (>= 1.3.1), libpng16-16 (>= 1.6.2-1), libtiff6 (>= 4.0.3)
Recommends: libgdk-pixbuf2.0-bin
Breaks: libgdk-pixbuf2.0-0 (<< 2.40.0+dfsg-6~)
Description: GDK Pixbuf library
 The GDK Pixbuf library provides:
  - Image loading and saving facilities.
  - Fast scaling and compositing of pixbufs.
  - Simple animation loading (ie. animated GIFs)
Homepage: https://www.gtk.org/

Package: libgdk-pixbuf2.0-bin
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 75
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gdk-pixbuf
Version: 2.42.10+dfsg-1+deb12u4
Replaces: libgdk-pixbuf2.0-dev (<< 2.36.12-2~)
Depends: libc6 (>= 2.34), libgdk-pixbuf-2.0-0 (>= 2.35.4), libglib2.0-0 (>= 2.56.0)
Breaks: libgdk-pixbuf2.0-dev (<< 2.36.12-2~)
Description: GDK Pixbuf library (thumbnailer)
 The GDK Pixbuf library provides:
  - Image loading and saving facilities.
  - Fast scaling and compositing of pixbufs.
  - Simple animation loading (ie. animated GIFs)
 .
 This package contains the GDK pixdata compression utility, the thumbnailer
 and a utility for converting images into C code.
Homepage: https://www.gtk.org/

Package: libgdk-pixbuf2.0-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2516
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: gdk-pixbuf
Version: 2.42.10+dfsg-1+deb12u4
Description: GDK Pixbuf library - data files
 This package contains the common files and translations for the GDK
 Pixbuf library.
Homepage: https://www.gtk.org/

Package: libgfortran5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2923
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.2.0-14+deb12u1
Depends: gcc-12-base (= 12.2.0-14+deb12u1), libc6 (>= 2.34), libgcc-s1 (>= 4.3), libquadmath0 (>= 4.6)
Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Description: Runtime library for GNU Fortran applications
 Library needed for GNU Fortran applications linked against the
 shared library.
Homepage: http://gcc.gnu.org/

Package: libgirepository-1.0-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 295
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gobject-introspection
Version: 1.74.0-3
Provides: libgirepository-1.0-1-with-libffi8 (= 1.74.0-3)
Depends: libc6 (>= 2.29), libffi8 (>= 3.4), libglib2.0-0 (>= 2.74.0)
Breaks: libcjs0 (<< 4.8.2-1+b1), libgjs0g (<< 1.68.4-1+b1), libglib-object-introspection-perl (<< 0.049-1+b2), python-gi (<< 3.42.0-1+b1), python3-gi (<< 3.42.0-1+b1), ruby-gobject-introspection (<< 3.4.3-1+b2)
Description: Library for handling GObject introspection data (runtime library)
 GObject Introspection is a project for providing machine readable
 introspection data of the API of C libraries. This introspection
 data can be used in several different use cases, for example
 automatic code generation for bindings, API verification and documentation
 generation.
 .
 GObject Introspection contains tools to generate and handle the
 introspection data.
 .
 This package contains a C library for handling the introspection data.
Homepage: https://wiki.gnome.org/GObjectIntrospection

Package: libgl1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 652
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libglvnd
Version: 1.6.0-1
Depends: libc6 (>= 2.34), libglvnd0 (= 1.6.0-1), libglx0 (= 1.6.0-1)
Description: Vendor neutral GL dispatch library -- legacy GL support
 This is an implementation of the vendor-neutral dispatch layer for
 arbitrating OpenGL API calls between multiple vendors on a per-screen basis.
 .
 This package contains support for old libGL for compatibility reasons.
Homepage: https://gitlab.freedesktop.org/glvnd/libglvnd

Package: libgl1-mesa-dri
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 25254
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: mesa
Version: 22.3.6-1+deb12u2
Depends: libc6 (>= 2.34), libdrm-amdgpu1 (>= 2.4.110), libdrm-intel1 (>= 2.4.38), libdrm-nouveau2 (>= 2.4.66), libdrm-radeon1 (>= 2.4.31), libdrm2 (>= 2.4.75), libelf1 (>= 0.142), libexpat1 (>= 2.0.1), libgcc-s1 (>= 3.4), libglapi-mesa (= 22.3.6-1+deb12u2), libllvm15, libsensors5 (>= 1:3.5.0), libstdc++6 (>= 11), libxcb-dri3-0 (>= 1.13), libzstd1 (>= 1.5.2), zlib1g (>= 1:1.1.4)
Description: free implementation of the OpenGL API -- DRI modules
 This version of Mesa provides GLX and DRI capabilities: it is capable of
 both direct and indirect rendering.  For direct rendering, it can use DRI
 modules from the libgl1-mesa-dri package to accelerate drawing.
 .
 This package does not include the OpenGL library itself, only the DRI
 modules for accelerating direct rendering.
 .
 For a complete description of Mesa, please look at the
 libglx-mesa0 package.
Homepage: https://mesa3d.org/

Package: libglapi-mesa
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 268
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: mesa
Version: 22.3.6-1+deb12u2
Depends: libc6 (>= 2.34)
Description: free implementation of the GL API -- shared library
 The Mesa GL API module is responsible for dispatching all the gl*
 functions. It is intended to be mainly used by both the libgles1-mesa
 and libgles2-mesa packages.
Homepage: https://mesa3d.org/

Package: libglib2.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 4135
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: glib2.0
Version: 2.74.6-2+deb12u9
Depends: libc6 (>= 2.34), libffi8 (>= 3.4), libmount1 (>= 2.35.2-7~), libpcre2-8-0 (>= 10.22), libselinux1 (>= 3.1~), zlib1g (>= 1:1.2.2)
Recommends: libglib2.0-data, shared-mime-info, xdg-user-dirs
Suggests: low-memory-monitor
Breaks: gimp (<< 2.10.14-3~), glib-networking-tests (<< 2.70.0~), gnome-keyring (<< 40.0-3~), libedataserver-1.2-26 (<< 3.44.3-2~), libgirepository-1.0-1 (<< 1.62.0-4~), libgladeui-2-6 (<< 3.22.2), libsoup2.4-tests (<< 2.72.0-3~)
Description: GLib library of C routines
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK+, GIMP, and GNOME.
 .
 This package contains the shared libraries.
Homepage: https://wiki.gnome.org/Projects/GLib

Package: libglvnd0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 728
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libglvnd
Version: 1.6.0-1
Replaces: libgldispatch0-nvidia
Depends: libc6 (>= 2.34)
Breaks: libgldispatch0-nvidia
Description: Vendor neutral GL dispatch library
 This is an implementation of the vendor-neutral dispatch layer for
 arbitrating OpenGL API calls between multiple vendors on a per-screen basis.
 .
 This package contains the GL dispatch library.
Homepage: https://gitlab.freedesktop.org/glvnd/libglvnd

Package: libglx-mesa0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 518
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: mesa
Version: 22.3.6-1+deb12u2
Provides: libglx-vendor
Depends: libc6 (>= 2.34), libdrm2 (>= 2.4.75), libexpat1 (>= 2.0.1), libglapi-mesa (= 22.3.6-1+deb12u2), libx11-6 (>= 2:1.4.99.1), libx11-xcb1 (>= 2:1.8.4), libxcb-dri2-0 (>= 1.8), libxcb-dri3-0 (>= 1.13), libxcb-glx0 (>= 1.8), libxcb-present0, libxcb-randr0, libxcb-shm0, libxcb-sync1, libxcb-xfixes0, libxcb1 (>= 1.9.2), libxext6, libxfixes3, libxshmfence1, libxxf86vm1, libgl1-mesa-dri
Breaks: glx-diversions (<< 0.8.4~), libopengl-perl (<< 0.6704+dfsg-2)
Description: free implementation of the OpenGL API -- GLX vendor library
 Mesa is a 3-D graphics library with an API which is very similar to
 that of OpenGL.  To the extent that Mesa utilizes the OpenGL command
 syntax or state machine, it is being used with authorization from
 Silicon Graphics, Inc.  However, the authors make no claim that Mesa
 is in any way a compatible replacement for OpenGL or associated with
 Silicon Graphics, Inc.
 .
 This version of Mesa provides GLX and DRI capabilities: it is capable of
 both direct and indirect rendering.  For direct rendering, it can use DRI
 modules from the libgl1-mesa-dri package to accelerate drawing.
 .
 This package does not include the modules themselves: these can be found
 in the libgl1-mesa-dri package.
Homepage: https://mesa3d.org/

Package: libglx0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 162
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libglvnd
Version: 1.6.0-1
Depends: libc6 (>= 2.34), libglvnd0 (= 1.6.0-1), libx11-6 (>= 2:1.4.99.1), libglx-mesa0
Description: Vendor neutral GL dispatch library -- GLX support
 This is an implementation of the vendor-neutral dispatch layer for
 arbitrating OpenGL API calls between multiple vendors on a per-screen basis.
 .
 This package contains support for GLX.
Homepage: https://gitlab.freedesktop.org/glvnd/libglvnd

Package: libgme0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 333
Maintainer: Ileana Dumitrescu <ileanadumitrescu95@gmail.com>
Architecture: amd64
Multi-Arch: same
Source: game-music-emu
Version: 0.6.3-6
Depends: libc6 (>= 2.29), libgcc-s1 (>= 3.0), libstdc++6 (>= 11), zlib1g (>= 1:1.1.4)
Description: Playback library for video game music files - shared library
 game-music-emu is a collection of video game music file emulators that
 support the following formats and systems:
  * AY        ZX Spectrum/Amstrad CPC
  * GBS       Nintendo Game Boy
  * GYM       Sega Genesis/Mega Drive
  * HES       NEC TurboGrafx-16/PC Engine
  * KSS       MSX Home Computer/other Z80 systems (doesn't support FM sound)
  * NSF/NSFE  Nintendo NES/Famicom (with VRC 6, Namco 106, and FME-7 sound)
  * SAP       Atari systems using POKEY sound chip
  * SPC       Super Nintendo/Super Famicom
  * VGM/VGZ   Sega Master System/Mark III, Sega Genesis/Mega Drive, BBC Micro
 .
 This package contains the shared libraries necessary to run programs
 using libgme.
Homepage: https://bitbucket.org/mpyne/game-music-emu/wiki/Home

Package: libgmp10
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 855
Maintainer: Debian Science Team <debian-science-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gmp
Version: 2:6.2.1+dfsg1-1.1
Depends: libc6 (>= 2.14)
Breaks: libmath-gmp-perl (<< 2.20-1), libmath-prime-util-gmp-perl (<< 0.51-2), postgresql-pgmp (<< 1.0.3-1)
Description: Multiprecision arithmetic library
 GNU MP is a programmer's library for arbitrary precision
 arithmetic (ie, a bignum package).  It can operate on signed
 integer, rational, and floating point numeric types.
 .
 It has a rich set of functions, and the functions have a regular
 interface.
Homepage: https://gmplib.org/

Package: libgnutls-dane0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 491
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gnutls28
Version: 3.7.9-2+deb12u7
Depends: libgnutls30 (= 3.7.9-2+deb12u7), libc6 (>= 2.34), libunbound8 (>= 1.8.0)
Suggests: dns-root-data
Description: GNU TLS library - DANE security support
 GnuTLS is a portable library which implements the Transport Layer
 Security (TLS 1.0, 1.1, 1.2, 1.3) and Datagram
 Transport Layer Security (DTLS 1.0, 1.2) protocols.
 .
 GnuTLS features support for:
  - certificate path validation, as well as DANE and trust on first use.
  - the Online Certificate Status Protocol (OCSP).
  - public key methods, including RSA and Elliptic curves, as well as password
    and key authentication methods such as SRP and PSK protocols.
  - all the strong encryption algorithms, including AES and Camellia.
  - CPU-assisted cryptography with VIA padlock and AES-NI instruction sets.
  - HSMs and cryptographic tokens, via PKCS #11.
 .
 This package contains the runtime library for DANE (DNS-based Authentication
 of Named Entities) support.
Homepage: https://www.gnutls.org/

Package: libgnutls30
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3396
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gnutls28
Version: 3.7.9-2+deb12u7
Depends: libc6 (>= 2.34), libgmp10 (>= 2:6.2.1+dfsg1), libhogweed6 (>= 3.6), libidn2-0 (>= 2.0.0), libnettle8 (>= 3.7~), libp11-kit0 (>= 0.23.18.1), libtasn1-6 (>= 4.14), libunistring2 (>= 0.9.7)
Suggests: gnutls-bin
Description: GNU TLS library - main runtime library
 GnuTLS is a portable library which implements the Transport Layer
 Security (TLS 1.0, 1.1, 1.2, 1.3) and Datagram
 Transport Layer Security (DTLS 1.0, 1.2) protocols.
 .
 GnuTLS features support for:
  - certificate path validation, as well as DANE and trust on first use.
  - the Online Certificate Status Protocol (OCSP).
  - public key methods, including RSA and Elliptic curves, as well as password
    and key authentication methods such as SRP and PSK protocols.
  - all the strong encryption algorithms, including AES and Camellia.
  - CPU-assisted cryptography with VIA padlock and AES-NI instruction sets.
  - HSMs and cryptographic tokens, via PKCS #11.
 .
 This package contains the main runtime library.
Homepage: https://www.gnutls.org/

Package: libgomp1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 312
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.2.0-14+deb12u1
Depends: gcc-12-base (= 12.2.0-14+deb12u1), libc6 (>= 2.34)
Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Description: GCC OpenMP (GOMP) support library
 GOMP is an implementation of OpenMP for the C, C++, and Fortran compilers
 in the GNU Compiler Collection.
Homepage: http://gcc.gnu.org/

Package: libgpg-error0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 192
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libgpg-error
Version: 1.46-1
Depends: libc6 (>= 2.34)
Recommends: libgpg-error-l10n
Description: GnuPG development runtime library
 Library that defines common error values, messages, and common
 runtime functionality for all GnuPG components.  Among these are GPG,
 GPGSM, GPGME, GPG-Agent, libgcrypt, pinentry, SmartCard Daemon and
 possibly more in the future.
 .
 It will likely be renamed "gpgrt" in the future.
Homepage: https://www.gnupg.org/related_software/libgpg-error/

Package: libgpm2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 45
Maintainer: Axel Beckert <abe@debian.org>
Architecture: amd64
Multi-Arch: same
Source: gpm (1.20.7-10)
Version: 1.20.7-10+b1
Depends: libc6 (>= 2.33)
Suggests: gpm
Description: General Purpose Mouse - shared library
 This package provides a library that handles mouse requests
 and delivers them to applications. See the description for the 'gpm'
 package for more information.
Homepage: https://nico.schottelius.org/software/gpm/

Package: libgprofng0
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 3958
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: binutils
Version: 2.40-2
Depends: libbinutils (= 2.40-2), libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 5.2), zlib1g (>= 1:1.1.4)
Description: GNU Next Generation profiler (runtime library)
 Gprofng is the GNU Next Generation profiler for analyzing the performance
 of Linux applications.  Gprofng allows you to:
 .
  - Profile C / C++ / Java / Scala applications without needing to recompile
  - Profile multi-threaded applications
  - Analyze and compare multiple experiments
  - Use time-based sampling and / or hardware event counters
 .
 This package includes the libgprofng shared library.
Homepage: https://www.gnu.org/software/binutils/

Package: libgraphite2-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 191
Maintainer: Debian LibreOffice Maintainers <debian-openoffice@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: graphite2
Version: 1.3.14-1+deb12u1
Replaces: libgraphite2-2.0.0
Provides: libgraphite2-2.0.0
Depends: libc6 (>= 2.14)
Breaks: libgraphite2-2.0.0 (<< 1.2.0)
Description: Font rendering engine for Complex Scripts -- library
 Graphite is a system that can be used to create and use "smart fonts" capable
 of displaying writing systems with various complex behaviors, such as:
 contextual shaping, ligatures, reordering, split glyphs, bidirectionality,
 stacking diacritics and complex positioning.
 .
 This library was designed and developed by the NRSI (Non-Roman Script
 Initiative) within SIL International (www.sil.org) to act as a complement to
 other smart font rendering technologies with limited practical local
 extensibility. Its purpose is to help meet the needs of a very large number
 of "minority language" communities for local extensibility of complex script
 behaviors.
 .
 The behavior of the rendering engine for a given writing system is specified
 through extra tables added to a TrueType font.  These tables are generated by
 compiling a GDL (Graphite Description Language) source file into a font using
 grcompiler.
 .
 This package contains the shared library.
Homepage: http://graphite.sil.org/

Package: libgs-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 317
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: all
Multi-Arch: foreign
Source: ghostscript
Version: 10.0.0~dfsg-11+deb12u8
Replaces: libgs9-common (<< 10)
Breaks: libgs9-common (<< 10)
Description: interpreter for the PostScript language and for PDF - ICC profiles
 GPL Ghostscript is used for PostScript/PDF preview and printing.
 Usually as a back-end to a program such as ghostview,
 it can display PostScript and PDF documents in an X11 environment.
 .
 This package provides common ICC profiles.
Homepage: https://www.ghostscript.com/

Package: libgs10
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 21779
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ghostscript
Version: 10.0.0~dfsg-11+deb12u8
Depends: libgs10-common (= 10.0.0~dfsg-11+deb12u8), poppler-data, libc6 (>= 2.34), libcups2 (>= 2.3~b6), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.10.1), libidn12 (>= 1.13), libijs-0.35 (>= 0.35), libjbig2dec0 (>= 0.16+20190905), libjpeg62-turbo (>= 1.3.1), liblcms2-2 (>= 2.6), libopenjp2-7 (>= 2.0.0), libpaper1, libpng16-16 (>= 1.6.2-1), libtiff6 (>= 4.0.3), libx11-6, libxt6, zlib1g (>= 1:1.2.0)
Description: interpreter for the PostScript language and for PDF - Library
 GPL Ghostscript is used for PostScript/PDF preview and printing.
 Usually as a back-end to a program such as ghostview,
 it can display PostScript and PDF documents in an X11 environment.
 .
 This package provides the Ghostscript library
 which makes the facilities of GPL Ghostscript available
 to applications.
Homepage: https://www.ghostscript.com/

Package: libgs10-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2844
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: all
Multi-Arch: foreign
Source: ghostscript
Version: 10.0.0~dfsg-11+deb12u8
Replaces: libgs-common (<< 10.0.0~dfsg-5)
Depends: fonts-urw-base35 (>= 20200910), libgs-common
Recommends: fonts-droid-fallback
Breaks: libgs-common (<< 10.0.0~dfsg-5)
Description: interpreter for the PostScript language and for PDF - common files
 GPL Ghostscript is used for PostScript/PDF preview and printing.
 Usually as a back-end to a program such as ghostview,
 it can display PostScript and PDF documents in an X11 environment.
 .
 This package provides common architecture-independent files
 needed by the GPL Ghostscript library.
 .
 By default, GPL Ghostscript uses a font from the fonts-droid package
 to approximate glyphs in PDFs
 for which the requested CJK TrueType font is missing.
 If the fonts-droid package is not installed,
 these glyphs will be rendered as bullets.
Homepage: https://www.ghostscript.com/

Package: libgsm1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 92
Maintainer: Debian Mobcom Maintainers <Debian-mobcom-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libgsm
Version: 1.0.22-1
Depends: libc6 (>= 2.4)
Conflicts: libgsm-dev
Description: Shared libraries for GSM speech compressor
 This package contains runtime shared libraries for libgsm, an
 implementation of the European GSM 06.10 provisional standard for
 full-rate speech transcoding, prI-ETS 300 036, which uses RPE/LTP
 (residual pulse excitation/long term prediction) coding at 13 kbit/s.
 .
 GSM 06.10 compresses frames of 160 13-bit samples (8 kHz sampling
 rate, i.e. a frame rate of 50 Hz) into 260 bits; for compatibility
 with typical UNIX applications, this implementation turns frames of
 160 16-bit linear samples into 33-byte frames (1650 Bytes/s).
 The quality of the algorithm is good enough for reliable speaker
 recognition; even music often survives transcoding in recognizable
 form (given the bandwidth limitations of 8 kHz sampling rate).
 .
 The interfaces offered are a front end modelled after compress(1), and
 a library API.  Compression and decompression run faster than realtime
 on most SPARCstations.  The implementation has been verified against the
 ETSI standard test patterns.
Homepage: http://www.quut.com/gsm/

Package: libgssapi-krb5-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 425
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.20.1-2+deb12u5
Depends: libc6 (>= 2.33), libcom-err2 (>= 1.43.9), libk5crypto3 (>= 1.20), libkrb5-3 (= 1.20.1-2+deb12u5), libkrb5support0 (>= 1.15~beta1)
Suggests: krb5-doc, krb5-user
Breaks: moonshot-gss-eap (<= 1.0)
Description: MIT Kerberos runtime libraries - krb5 GSS-API Mechanism
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library for the MIT Kerberos
 implementation of GSS-API used by applications and Kerberos clients.
Homepage: https://web.mit.edu/kerberos/

Package: libharfbuzz0b
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2609
Maintainer: أحمد المحمودي (Ahmed El-Mahmoudy) <aelmahmoudy@users.sourceforge.net>
Architecture: amd64
Multi-Arch: same
Source: harfbuzz
Version: 6.0.0+dfsg-3
Replaces: libharfbuzz0, libharfbuzz0a
Depends: libc6 (>= 2.34), libfreetype6 (>= 2.11.0), libglib2.0-0 (>= 2.31.8), libgraphite2-3 (>= 1.2.2)
Conflicts: libharfbuzz0, libharfbuzz0a
Description: OpenType text shaping engine (shared library)
 HarfBuzz is an implementation of the OpenType Layout engine (aka layout
 engine) and the script-specific logic (aka shaping engine).
 .
 This package contains the shared libraries.
Homepage: https://www.freedesktop.org/wiki/Software/HarfBuzz

Package: libheif-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 162
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libheif
Version: 1.15.1-1+deb12u1
Depends: libheif1 (= 1.15.1-1+deb12u1), libaom-dev, libdav1d-dev, libde265-dev (>= 1.0.7), libx265-dev
Description: ISO/IEC 23008-12:2017 HEIF file format decoder - development files
 libheif is an ISO/IEC 23008-12:2017 HEIF file format decoder. HEIF is a new
 image file format employing HEVC (h.265) image coding for the best compression
 ratios currently possible.
 .
 The development headers for compiling programs that use libheif are provided
 by this package.
Homepage: http://www.libheif.org

Package: libheif-examples
Status: install ok installed
Priority: optional
Section: video
Installed-Size: 174
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Source: libheif
Version: 1.15.1-1+deb12u1
Depends: libheif1 (= 1.15.1-1+deb12u1), libc6 (>= 2.34), libgcc-s1 (>= 3.0), libjpeg62-turbo (>= 1:2.0.2), libpng16-16 (>= 1.6.2-1), libstdc++6 (>= 9)
Description: ISO/IEC 23008-12:2017 HEIF file format decoder - examples
 libheif is an ISO/IEC 23008-12:2017 HEIF file format decoder. HEIF is a new
 image file format employing HEVC (h.265) image coding for the best compression
 ratios currently possible.
 .
 Sample applications using libheif are provided by this package.
Homepage: http://www.libheif.org

Package: libheif1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 659
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libheif
Version: 1.15.1-1+deb12u1
Depends: libaom3 (>= 3.2.0), libc6 (>= 2.34), libdav1d6 (>= 0.1.0), libde265-0 (>= 1.0.7), libgcc-s1 (>= 3.0), libstdc++6 (>= 11), libx265-199 (>= 3.5), zlib1g (>= 1:1.1.4)
Description: ISO/IEC 23008-12:2017 HEIF file format decoder - shared library
 libheif is an ISO/IEC 23008-12:2017 HEIF file format decoder. HEIF is a new
 image file format employing HEVC (h.265) image coding for the best compression
 ratios currently possible.
 .
 This package contains the shared library.
Homepage: http://www.libheif.org

Package: libhogweed6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 463
Maintainer: Magnus Holmgren <holmgren@debian.org>
Architecture: amd64
Multi-Arch: same
Source: nettle
Version: 3.8.1-2
Depends: libc6 (>= 2.14), libgmp10 (>= 2:6.2.1+dfsg1), libnettle8
Description: low level cryptographic library (public-key cryptos)
 Nettle is a cryptographic library that is designed to fit easily in more or
 less any context: In crypto toolkits for object-oriented languages (C++,
 Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel
 space.
 .
 It tries to solve a problem of providing a common set of cryptographic
 algorithms for higher-level applications by implementing a
 context-independent set of cryptographic algorithms. In that light, Nettle
 doesn't do any memory allocation or I/O, it simply provides the
 cryptographic algorithms for the application to use in any environment and
 in any way it needs.
 .
 This package contains the asymmetric cryptographic algorithms, which,
 require the GNU multiple precision arithmetic library (libgmp) for
 their large integer computations.
Homepage: http://www.lysator.liu.se/~nisse/nettle/

Package: libhtml-parser-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 227
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Version: 3.81-1+deb12u1
Depends: perl (>= 5.36.0-7+deb12u3), perlapi-5.36.0, libc6 (>= 2.14), libhtml-tagset-perl, liburi-perl
Recommends: libhttp-message-perl
Suggests: libdata-dump-perl
Enhances: libwww-perl
Description: collection of modules that parse HTML text documents
 HTML::Parser is a collection of modules useful for handling HTML documents.
 These modules used to be part of the libwww-perl distribution, but are now
 unbundled in order to facilitate a separate development track.
 .
 Objects of the HTML::Parser class will recognize markup and separate it from
 content data. As different kinds of markup are recognized, the corresponding
 event handler is invoked. The document to be parsed may also be supplied in
 arbitrary chunks, making on-the-fly parsing of network documents possible.
Homepage: https://metacpan.org/release/HTML-Parser

Package: libhtml-tagset-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 31
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 3.20-6
Depends: perl:any
Description: data tables pertaining to HTML
 HTML::Tagset contains data tables useful in dealing with HTML.  For instance,
 it provides %HTML::Tagset::emptyElement, which lists all of the HTML elements
 which cannot have content.  It provides no functions or methods.
Homepage: https://metacpan.org/release/HTML-Tagset

Package: libhtml-template-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 188
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 2.97-2
Depends: perl:any, libcgi-pm-perl | perl (<< 5.19)
Suggests: libipc-sharedcache-perl
Description: module for using HTML templates with Perl
 HTML::Template attempts to make using HTML templates simple and
 natural. It extends standard HTML with the pseudo tags <TMPL_VAR>,
 <TMPL_LOOP>, <TMPL_INCLUDE>, <TMPL_IF> and <TMPL_ELSE>. These are used
 to implement some basic logic - variable substitution, loops,
 conditional branches - inside the HTML template, while leaving the more
 complex computations to separate Perl code. This keeps the template
 accessible for designers and other non-Perl people, without limiting
 the programmer.
 .
 HTML::Template optionally stores its cache in shared memory using the
 IPC::SharedCache module. Please install libipc-sharedcache-perl and
 pass the shared_cache option to HTML::Template if you want to make use
 of this.
Homepage: https://metacpan.org/release/HTML-Template

Package: libhttp-date-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 30
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 6.05-2
Depends: perl:any, libtimedate-perl, libtime-local-perl (>= 1.28)
Description: module of date conversion routines
 HTTP::Date provides functions that deal the date formats used by the HTTP
 protocol (and then some more). Only the first two functions, time2str() and
 str2time(), are exported by default.
Homepage: https://metacpan.org/release/HTTP-Date

Package: libhttp-message-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 200
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 6.44-1
Depends: perl:any, libclone-perl (>= 0.46), libcompress-raw-bzip2-perl, libcompress-raw-zlib-perl, libencode-locale-perl, libencode-perl (>= 3.01), libhttp-date-perl, libio-html-perl, liblwp-mediatypes-perl, liburi-perl
Description: perl interface to HTTP style messages
 The HTTP::Message distribution contains classes useful for representing the
 messages passed in HTTP style communication. These are classes representing
 requests, responses and the headers contained within them.
 .
 The HTTP::Headers class encapsulates HTTP-style message headers. The headers
 consist of attribute-value pairs also called fields, which may be repeated,
 and which are printed in a particular order. The field names are cases
 insensitive.
 .
 Instances of this class are usually created as member variables of the
 HTTP::Request and HTTP::Response classes, internal to the library.
Homepage: https://metacpan.org/release/HTTP-Message

Package: libhwy1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1628
Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: highway
Version: 1.0.3-3+deb12u1
Depends: libc6 (>= 2.25), libgcc-s1 (>= 3.4), libstdc++6 (>= 5.2)
Description: Efficient and performance-portable SIMD wrapper (runtime files)
 This library provides type-safe and source-code portable wrappers over
 existing platform-specific intrinsics. Its design aims for simplicity,
 reliable efficiency across platforms, and immediate usability with current
 compilers.
 .
 This package installs the runtime files.
Homepage: https://github.com/google/highway

Package: libice-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 238
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libice
Version: 2:1.0.10-1
Depends: libice6 (= 2:1.0.10-1), x11proto-dev
Suggests: libice-doc
Description: X11 Inter-Client Exchange library (development headers)
 This package provides the main interface to the X11 Inter-Client Exchange
 library, which allows for communication of data between X clients.
 .
 This package contains the development headers for the library found in libice6.
 Non-developers likely have little use for this package.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libICE

Package: libice6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 133
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libice
Version: 2:1.0.10-1
Depends: libbsd0 (>= 0.2.0), libc6 (>= 2.14), x11-common
Description: X11 Inter-Client Exchange library
 This package provides the main interface to the X11 Inter-Client Exchange
 library, which allows for communication of data between X clients.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libICE

Package: libicu-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 47784
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: icu
Version: 72.1-3+deb12u1
Replaces: icu-devtools (<< 72.1~rc-1~)
Depends: libicu72 (= 72.1-3+deb12u1), icu-devtools (>= 72.1-3+deb12u1), libc6-dev | libc-dev
Suggests: icu-doc
Breaks: icu-devtools (<< 72.1~rc-1~)
Description: Development files for International Components for Unicode
 ICU is a C++ and C library that provides robust and full-featured
 Unicode and locale support.  This package contains the development
 files for ICU.
Homepage: https://icu.unicode.org/

Package: libicu72
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 36170
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: icu
Version: 72.1-3+deb12u1
Replaces: libiculx63 (<< 63.1-5)
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libstdc++6 (>= 12)
Breaks: libiculx63 (<< 63.1-5), openttd (<< 1.8.0-2~)
Description: International Components for Unicode
 ICU is a C++ and C library that provides robust and full-featured
 Unicode and locale support.  This package contains the runtime
 libraries for ICU.
Homepage: https://icu.unicode.org/

Package: libidn12
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 265
Maintainer: Debian Libidn Team <help-libidn@gnu.org>
Architecture: amd64
Multi-Arch: same
Source: libidn
Version: 1.41-1
Depends: libc6 (>= 2.14)
Description: GNU Libidn library, implementation of IETF IDN specifications
 GNU Libidn is a fully documented implementation of the Stringprep,
 Punycode and IDNA specifications.  Libidn's purpose is to encode and
 decode internationalized domain names.  The Nameprep, XMPP, SASLprep,
 and iSCSI profiles are supported.
 .
 This package contains the shared library.
Homepage: https://www.gnu.org/software/libidn/

Package: libidn2-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 439
Maintainer: Debian Libidn team <help-libidn@gnu.org>
Architecture: amd64
Multi-Arch: same
Source: libidn2 (2.3.3-1)
Version: 2.3.3-1+b1
Depends: libc6 (>= 2.14), libunistring2 (>= 0.9.7)
Description: Internationalized domain names (IDNA2008/TR46) library
 Libidn2 implements the revised algorithm for internationalized domain
 names called IDNA2008/TR46.
 .
 This package contains runtime libraries.
Homepage: https://www.gnu.org/software/libidn/#libidn2

Package: libiec61883-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 81
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libiec61883 (1.2.0-6)
Version: 1.2.0-6+b1
Depends: libc6 (>= 2.4), libraw1394-11 (>= 2.1.2)
Description: partial implementation of IEC 61883 (shared lib)
 Implementation of IEC 61883, part 1 (CIP, plug registers, and CMP), part 2
 (DV-SD), part 4 (MPEG2-TS), and part 6 (AMDTP). Outside of IIDC, nearly all
 FireWire multimedia devices use IEC 61883 protocols.
 .
 The libiec61883 library provides a higher level API for streaming DV,
 MPEG-2 and audio over Linux IEEE 1394. This includes both reception and
 transmission. It uses the new "rawiso" API of libraw1394, which
 transparently provides mmap-ed DMA for efficient data transfer. It also
 represents the third generation of I/O technology for Linux 1394 for
 these media types thereby removing the complexities of additional kernel
 modules, /dev nodes, and procfs. It also consolidates features for plug
 control registers and connection management that previously existed in
 experimental form in an unreleased version of libavc1394.
Homepage: https://ieee1394.wiki.kernel.org/index.php/Main_Page

Package: libigdgmm12
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 658
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: intel-gmmlib
Version: 22.3.3+ds1-1
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libstdc++6 (>= 4.1.1)
Description: Intel Graphics Memory Management Library -- shared library
 The Intel Graphics Memory Management Library provides device specific
 and buffer management for the Intel Graphics Compute Runtime for
 OpenCL and the Intel Media Driver for VAAPI.
 .
 This library is only useful for Broadwell and newer CPUs.
 .
 This package includes the shared library.
Homepage: https://github.com/intel/gmmlib

Package: libijs-0.35
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 50
Maintainer: Debian Printing Team <debian-printing@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ijs
Version: 0.35-15
Depends: libc6 (>= 2.14)
Description: IJS raster image transport protocol: shared library
 IJS is, first and foremost, a protocol for transmission of raster page
 images. This snapshot provides a reference implementation of the protocol,
 the design of which is still in flux. When the protocol specification is
 published, it will be authoritative. Applications should feel free to link
 against the library provided in this package, adapt that code for their own
 needs, or roll a completely new implementation.
 .
 IJS is a client-server protocol, used to write ghostscript drivers. The
 drivers are separate programs. The client and server communicate via pipes,
 though shared memory may be used additionally in the future. Currently IJS
 is used by the hpijs and ijsgimpprint drivers.
 .
 Code for both the client- and server-side is included in the library. This
 package provides the shared library.
Homepage: http://www.linuxprinting.org/ijs/

Package: libimage-exiftool-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 22957
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 12.57+dfsg-1
Provides: exiftool
Depends: perl:any
Recommends: libarchive-zip-perl, libunicode-linebreak-perl
Suggests: libposix-strptime-perl
Description: library and program to read and write meta information in multimedia files
 Image::ExifTool is a customizable set of Perl modules plus a full-featured
 command-line application called exiftool for reading and writing meta
 information in a wide variety of files, including the maker note information
 of many digital cameras by various manufacturers such as Canon, Casio, DJI,
 FLIR, FujiFilm, GE, GoPro, HP, JVC/Victor, Kodak, Leaf, Minolta/Konica-Minolta,
 Nikon, Nintendo, Olympus/Epson, Panasonic/Leica, Pentax/Asahi, Phase One,
 Reconyx, Ricoh, Samsung, Sanyo, Sigma/Foveon and Sony.
 .
 The following modules/packages are recommended for specific features, e.g.
 decoding compressed and/or encrypted information from the indicated file
 types, calculating digest values for some information types, etc.:
 .
  * Archive::Zip / libarchive-zip-perl: ZIP, DOCX, PPTX, XLSX, ODP, ODS, ODT,
    EIP, iWork
  * Unicode::LineBreak / libunicode-linebreak-perl: for column-alignment of
    alternate language output
  * POSIX::strptime / libposix-strptime-perl: for inverse date/time conversion
  * Time::Piece (in perl core): alternative to POSIX::strptime
  * IO::Compress::RawDeflate + IO::Uncompress::RawInflate (in perl core): for
    reading FLIF images
Homepage: https://exiftool.org/

Package: libimath-3-1-29
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 335
Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: imath
Version: 3.1.6-1
Depends: libc6 (>= 2.4), libstdc++6 (>= 4.2.1)
Description: Utility libraries from ASF used by OpenEXR - runtime
 Imath is a basic, light-weight, and efficient C++ representation of
 2D and 3D vectors and matrices and other simple but useful
 mathematical objects, functions, and data types common in computer
 graphics applications, including the “half” 16-bit floating-point type.
 .
 Imath also includes optional Python bindings for all types and
 functions, including optimized implementations of vector and
 matrix arrays.
 .
 This package provides the runtime libraries.
Homepage: https://www.openexr.com

Package: libinotifytools0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 65
Maintainer: Joao Eriberto Mota Filho <eriberto@debian.org>
Architecture: amd64
Multi-Arch: same
Source: inotify-tools
Version: 3.22.6.0-4
Depends: libc6 (>= 2.33)
Description: utility wrapper around inotify
 inotify (inode notify) is a Linux kernel subsystem that monitors events in
 filesystems and reports those events to applications in real time via API.
 .
 inotify can be used to monitor individual files or directories. When a
 directory is monitored, inotify will return events for the directory itself
 and for files inside the directory.
 .
 libinotifytools is a thin layer on top of the kernel interface which makes
 it easy to set up watches on many files at once, read events without having
 to deal with low-level I/O and several utility functions for inotify-related
 string formatting.
Homepage: https://github.com/rvoicilas/inotify-tools/wiki/

Package: libio-html-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 41
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.004-3
Depends: perl:any
Description: open an HTML file with automatic charset detection
 IO::HTML provides an easy way to open a file containing HTML while
 automatically determining its encoding.  It uses the HTML5 encoding
 sniffing algorithm specified in section 8.2.2.1 of the draft standard.
Homepage: https://metacpan.org/release/IO-HTML

Package: libip4tc2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 66
Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: iptables
Version: 1.8.9-2
Depends: libc6 (>= 2.28)
Description: netfilter libip4tc library
 The iptables/xtables framework has been replaced by nftables. You should
 consider migrating now.
 .
 This package contains the user-space iptables (IPv4) C library from the
 Netfilter xtables framework.
 .
 iptables IPv4 ruleset ADT and kernel interface.
 .
 This library has been considered private for years (and still is), in the
 sense of changing symbols and backward compatibility not guaranteed.
Homepage: https://www.netfilter.org/

Package: libip6tc2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 66
Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: iptables
Version: 1.8.9-2
Depends: libc6 (>= 2.28)
Description: netfilter libip6tc library
 The iptables/xtables framework has been replaced by nftables. You should
 consider migrating now.
 .
 This package contains the user-space iptables (IPv6) C library from the
 Netfilter xtables framework.
 .
 iptables IPv6 ruleset ADT and kernel interface.
 .
 This library has been considered private for years (and still is), in the
 sense of changing symbols and backward compatibility not guaranteed.
Homepage: https://www.netfilter.org/

Package: libipset13
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 265
Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ipset
Version: 7.17-1
Depends: libc6 (>= 2.34), libmnl0 (>= 1.0.3-4~)
Description: library for IP sets
 IP sets are a framework inside the Linux 2.4.x and 2.6.x kernel which can be
 administered by the ipset(8) utility. Depending on the type, currently an
 IP set may store IP addresses, (TCP/UDP) port numbers or IP addresses with
 MAC addresses in a  way which ensures lightning speed when matching an
 entry against a set.
 .
 If you want to
 .
  * store multiple IP addresses or port numbers and match against the
    entire collection using a single iptables rule.
  * dynamically update iptables rules against IP addresses or ports without
    performance penalty.
  * express complex IP address and ports based rulesets with a single
    iptables rule and benefit from the speed of IP sets.
 .
 then IP sets may be the proper tool for you.
 .
 This package contains the shared libraries needed to run programs that use
 the IP sets library.
Homepage: https://ipset.netfilter.org/

Package: libisl23
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2302
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: isl
Version: 0.25-1.1
Replaces: libisl-dbg (<< 0.19)
Depends: libc6 (>= 2.14), libgmp10 (>= 2:6.2.1+dfsg1)
Breaks: libisl-dbg (<< 0.19)
Description: manipulating sets and relations of integer points bounded by linear constraints
 isl is a library for manipulating sets and relations of integer points
 bounded by linear constraints. Supported operations on sets include
 intersection, union, set difference, emptiness check, convex hull,
 (integer) affine hull, integer projection, and computing the lexicographic
 minimum using parametric integer programming. It also includes an ILP solver
 based on generalized basis reduction.
 .
 This package contains the runtime library.
Homepage: http://isl.gforge.inria.fr/

Package: libitm1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 115
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.2.0-14+deb12u1
Depends: gcc-12-base (= 12.2.0-14+deb12u1), libc6 (>= 2.34)
Description: GNU Transactional Memory Library
 GNU Transactional Memory Library (libitm) provides transaction support for
 accesses to the memory of a process, enabling easy-to-use synchronization of
 accesses to shared memory by several threads.
Homepage: http://gcc.gnu.org/

Package: libjack-jackd2-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1154
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: jackd2
Version: 1.9.21~dfsg-3
Replaces: libjack-0.116, libjack-0.125
Provides: libjack-0.116, libjack-0.125
Depends: libc6 (>= 2.34), libdb5.3, libgcc-s1 (>= 3.0), libopus0 (>= 1.3.1-2~), libsamplerate0 (>= 0.1.7), libstdc++6 (>= 11)
Suggests: jackd2 (= 1.9.21~dfsg-3)
Conflicts: libjack-0.116, libjack-0.125, libjack0
Description: JACK Audio Connection Kit (libraries)
 JACK is a low-latency sound server, allowing multiple applications to
 connect to one audio device, and to share audio between themselves.
 .
 This package contains the shared libraries.
Homepage: https://jackaudio.org/

Package: libjansson4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 101
Maintainer: Alessandro Ghedini <ghedo@debian.org>
Architecture: amd64
Multi-Arch: same
Source: jansson
Version: 2.14-2
Depends: libc6 (>= 2.14)
Description: C library for encoding, decoding and manipulating JSON data
 Jansson is a C library for encoding, decoding and manipulating JSON data.
 .
 It features:
  * Simple and intuitive API and data model
  * Comprehensive documentation
  * No dependencies on other libraries
  * Full Unicode support (UTF-8)
  * Extensive test suite
Homepage: http://www.digip.org/jansson/

Package: libjbig-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 92
Maintainer: Michael van der Kolff <mvanderkolff@gmail.com>
Architecture: amd64
Multi-Arch: same
Source: jbigkit
Version: 2.1-6.1
Depends: libjbig0 (= 2.1-6.1)
Description: JBIGkit development files
 JBIG-KIT provides a portable library of compression and decompression functions
 with a documented interface that you can include very easily into your image or
 document processing software.
 .
 This package contains the headers for the library.
 .
 Please note: There is no statically linked library in this package, and what
 was previously two libraries with a single common file has been merged into
 one library (libjbig).
Homepage: http://www.cl.cam.ac.uk/~mgk25/jbigkit/

Package: libjbig0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 84
Maintainer: Michael van der Kolff <mvanderkolff@gmail.com>
Architecture: amd64
Multi-Arch: same
Source: jbigkit
Version: 2.1-6.1
Depends: libc6 (>= 2.4)
Description: JBIGkit libraries
 JBIG-KIT provides a portable library of compression and decompression functions
 with a documented interface that you can include very easily into your image or
 document processing software.
 .
 This package contains the dynamically linked library.
Homepage: http://www.cl.cam.ac.uk/~mgk25/jbigkit/

Package: libjbig2dec0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 182
Maintainer: Debian Printing Team <debian-printing@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: jbig2dec
Version: 0.19-3
Depends: libc6 (>= 2.14)
Description: JBIG2 decoder library - shared libraries
 jbig2dec is a decoder library and example utility implementing the JBIG2
 bi-level image compression spec. Also known as ITU T.88 and ISO IEC
 14492, and included by reference in Adobe's PDF version 1.4 and later.
 .
 This package contains the shared library libjbig2dec.
Homepage: https://jbig2dec.com/

Package: libjemalloc2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 872
Maintainer: Faidon Liambotis <paravoid@debian.org>
Architecture: amd64
Multi-Arch: same
Source: jemalloc
Version: 5.3.0-1
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.3), libstdc++6 (>= 4.4)
Description: general-purpose scalable concurrent malloc(3) implementation
 A library providing a malloc(3) implementation for multi-threaded processes on
 multi-processor systems.
 .
 Notable features are reduced lock contention, predictable low fragmentation,
 and introspection with heap profiling.
Homepage: http://jemalloc.net/

Package: libjpeg-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 107
Maintainer: Ondřej Surý <ondrej@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libjpeg-turbo
Version: 1:2.1.5-2
Depends: libjpeg62-turbo-dev (>= 1:2.1.5-2)
Conflicts: libjpeg62-dev, libjpeg7-dev, libjpeg8-dev, libjpeg9-dev
Description: Development files for the JPEG library [dummy package]
 This package depends on default Debian implementation of
 libjpeg.so.62 JPEG library.
Homepage: https://www.libjpeg-turbo.org/

Package: libjpeg62-turbo
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 677
Maintainer: Ondřej Surý <ondrej@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libjpeg-turbo
Version: 1:2.1.5-2
Replaces: libjpeg62
Provides: libjpeg62 (= 1:2.1.5-2)
Depends: libc6 (>= 2.14)
Conflicts: libjpeg62
Description: libjpeg-turbo JPEG runtime library
 The libjpeg-turbo JPEG library is a library for handling JPEG files.
 .
 libjpeg-turbo is a JPEG image codec that uses SIMD instructions (MMX,
 SSE2, NEON) to accelerate baseline JPEG compression and decompression
 on x86, x86-64, and ARM systems.  The libjpeg-turbo JPEG library is
 an API/ABI compatible with the IJG JPEG library.
 .
 This package contains the shared runtime library.
Homepage: https://www.libjpeg-turbo.org/

Package: libjpeg62-turbo-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1096
Maintainer: Ondřej Surý <ondrej@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libjpeg-turbo
Version: 1:2.1.5-2
Replaces: libjpeg62-dev, libjpeg7-dev, libjpeg8-dev, libjpeg9-dev
Provides: libjpeg-dev
Depends: libc-dev, libjpeg62-turbo (= 1:2.1.5-2)
Conflicts: libjpeg62-dev, libjpeg7-dev, libjpeg8-dev, libjpeg9-dev
Description: Development files for the libjpeg-turbo JPEG library
 The libjpeg-turbo JPEG library is a library for handling JPEG files.
 .
 libjpeg-turbo is a JPEG image codec that uses SIMD instructions (MMX,
 SSE2, NEON) to accelerate baseline JPEG compression and decompression
 on x86, x86-64, and ARM systems.  The libjpeg-turbo JPEG library is
 an API/ABI compatible with the IJG JPEG library.
 .
 This package contains the static library, headers and documentation.
Homepage: https://www.libjpeg-turbo.org/

Package: libjson-c5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 109
Maintainer: Nicolas Mora <babelouest@debian.org>
Architecture: amd64
Multi-Arch: same
Source: json-c
Version: 0.16-2
Depends: libc6 (>= 2.33)
Description: JSON manipulation library - shared library
 This library allows you to easily construct JSON objects in C,
 output them as JSON formatted strings and parse JSON formatted
 strings back into the C representation of JSON objects.
Homepage: https://github.com/json-c/json-c/wiki

Package: libjxl0.7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3472
Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: jpeg-xl
Version: 0.7.0-10+deb12u1
Depends: libbrotli1 (>= 0.6.0), libc6 (>= 2.35), libgcc-s1 (>= 3.4), libhwy1 (>= 0.16.0), liblcms2-2 (>= 2.13), libstdc++6 (>= 12)
Description: JPEG XL Image Coding System - "JXL" (shared libraries)
 The JPEG XL Image Coding System (ISO/IEC 18181) is a lossy and
 lossless image compression format. It has a rich feature set and is
 particularly optimized for responsive web environments, so that
 content renders well on a wide range of devices. Moreover, it includes
 several features that help transition from the legacy JPEG format.
 .
 This package installs shared libraries.
Homepage: https://github.com/libjxl/libjxl

Package: libjxr-tools
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 80
Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: jxrlib
Version: 1.2~git20170615.f752187-5
Depends: libc6 (>= 2.4), libjxr0 (>= 1.0)
Description: JPEG-XR lib - command line apps
 JPEG XR is an approved ISO/IEC International standard (its official
 designation is ISO/IEC 29199-2).
 .
 JPEG XR started its life in Microsoft Research. It publicly first appeared as
 the HD Photo format in Windows Vista.
 .
 For web developers, JPEG XR has a large number of interesting features, see
 the table below. Some of these are big advantages over other image formats
 like JPEG, PNG, OpenEXR, and TIFF.
  - Better Compression (40% smaller than JPEG)
  - Lossless Mode (better compression than PNG)
  - Alpha Channel (compress color lossy and alpha losslessly)
  - Extended Bitdepth (supports 8-, 16-, and 32-bit/channel)
  - Progressive Decode
  - Advanced Decoding Features (tile-based layout, for efficient
    region-of-interest access.)
 .
 Provides command line tools for JPEG XR libs (JxrDecApp & JxrEncApp)
Homepage: https://github.com/4creators/jxrlib

Package: libjxr0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 418
Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: jxrlib
Version: 1.2~git20170615.f752187-5
Depends: libc6 (>= 2.29)
Description: JPEG-XR lib - libraries
 JPEG XR is an approved ISO/IEC International standard (its official
 designation is ISO/IEC 29199-2).
 .
 JPEG XR started its life in Microsoft Research. It publicly first appeared as
 the HD Photo format in Windows Vista.
 .
 For web developers, JPEG XR has a large number of interesting features, see
 the table below. Some of these are big advantages over other image formats
 like JPEG, PNG, OpenEXR, and TIFF.
  - Better Compression (40% smaller than JPEG)
  - Lossless Mode (better compression than PNG)
  - Alpha Channel (compress color lossy and alpha losslessly)
  - Extended Bitdepth (supports 8-, 16-, and 32-bit/channel)
  - Progressive Decode
  - Advanced Decoding Features (tile-based layout, for efficient
    region-of-interest access.)
Homepage: https://github.com/4creators/jxrlib

Package: libk5crypto3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 261
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.20.1-2+deb12u5
Depends: libc6 (>= 2.33), libkrb5support0 (>= 1.20)
Suggests: krb5-doc, krb5-user
Breaks: libgssapi-krb5-2 (<= 1.18~), libkrb5-3 (<= 1.18~)
Description: MIT Kerberos runtime libraries - Crypto Library
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime cryptography libraries used by
 applications and Kerberos clients.
Homepage: https://web.mit.edu/kerberos/

Package: libkeyutils1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 40
Maintainer: Christian Kastner <ckk@debian.org>
Architecture: amd64
Multi-Arch: same
Source: keyutils
Version: 1.6.3-2
Depends: libc6 (>= 2.14)
Description: Linux Key Management Utilities (library)
 Keyutils is a set of utilities for managing the key retention facility in the
 kernel, which can be used by filesystems, block devices and more to gain and
 retain the authorization and encryption keys required to perform secure
 operations.
 .
 This package provides a wrapper library for the key management facility system
 calls.
Homepage: https://git.kernel.org/pub/scm/linux/kernel/git/dhowells/keyutils.git

Package: libklibc
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 97
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: klibc
Version: 2.0.12-1
Description: minimal libc subset for use with initramfs
 klibc is intended to be a minimalistic libc subset for use with
 initramfs.  It is deliberately written for small size, minimal
 entanglement, and portability, not speed.  It is definitely a work in
 progress, and a lot of things are still missing.
Homepage: https://git.kernel.org/cgit/libs/klibc/klibc.git

Package: libkmod2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 141
Maintainer: Marco d'Itri <md@linux.it>
Architecture: amd64
Multi-Arch: same
Source: kmod
Version: 30+20221128-1
Depends: libc6 (>= 2.33), liblzma5 (>= 5.1.1alpha+20120614), libssl3 (>= 3.0.0), libzstd1 (>= 1.5.2)
Description: libkmod shared library
 This library provides an API for insertion, removal, configuration and
 listing of kernel modules.

Package: libkrb5-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1077
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.20.1-2+deb12u5
Depends: libc6 (>= 2.34), libcom-err2 (>= 1.43.9), libk5crypto3 (>= 1.20), libkeyutils1 (>= 1.5.9), libkrb5support0 (= 1.20.1-2+deb12u5), libssl3 (>= 3.0.0)
Recommends: krb5-locales
Suggests: krb5-doc, krb5-user
Breaks: libapache2-mod-auth-kerb (<= 5.4-2.4), libsmbclient (<= 2:3.6.1-2), sssd (<= 1.2.1-4.3)
Description: MIT Kerberos runtime libraries
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library for the main Kerberos v5 API
 used by applications and Kerberos clients.
Homepage: https://web.mit.edu/kerberos/

Package: libkrb5support0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 134
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.20.1-2+deb12u5
Depends: libc6 (>= 2.34)
Breaks: libgssapi-krb5-2 (<< 1.20), libk5crypto3 (<< 1.20), libkadm5clnt-mit9 (<< 1.13~alpha1-1), libkadm5srv-mit9 (<< 1.13~alpha1-1), libkdb5-8 (<< 1.16)
Description: MIT Kerberos runtime libraries - Support library
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains an internal runtime support library used by other
 Kerberos libraries.
Homepage: https://web.mit.edu/kerberos/

Package: libksba8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 316
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libksba
Version: 1.6.3-2
Depends: libc6 (>= 2.14), libgpg-error0 (>= 1.46)
Description: X.509 and CMS support library
 KSBA (pronounced Kasbah) is a library to make X.509 certificates as
 well as the CMS easily accessible by other applications.  Both
 specifications are building blocks of S/MIME and TLS.
 .
 KSBA provides these subsystems: ASN.1 Parser, BER Decoder, BER
 Encoder, Certificate Handling and CMS Handling.
 .
 This package contains the runtime library files.
Homepage: https://www.gnupg.org/related_software/libksba/

Package: liblapack3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 7188
Maintainer: Debian Science Team <debian-science-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: lapack
Version: 3.11.0-2
Provides: liblapack.so.3
Depends: libblas3 | libblas.so.3, libc6 (>= 2.29), libgcc-s1 (>= 4.0), libgfortran5 (>= 8)
Description: Library of linear algebra routines 3 - shared version
 LAPACK version 3.X is a comprehensive FORTRAN library that does
 linear algebra operations including matrix inversions, least
 squared solutions to linear sets of equations, eigenvector
 analysis, singular value decomposition, etc. It is a very
 comprehensive and reputable package that has found extensive
 use in the scientific community.
 .
 This package contains a shared version of the library.
Homepage: https://www.netlib.org/lapack/

Package: liblcms2-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 428
Maintainer: Thomas Weber <tweber@debian.org>
Architecture: amd64
Multi-Arch: same
Source: lcms2
Version: 2.14-2+deb12u1
Depends: libc6 (>= 2.29)
Suggests: liblcms2-utils
Description: Little CMS 2 color management library
 LittleCMS 2 intends to be a small-footprint color management engine, with
 special focus on accuracy and performance. It uses the International Color
 Consortium standard (ICC) of color management. LittleCMS 2 is a full
 implementation of ICC specification 4.2 plus all addendums. It fully supports
 all V2 and V4 profiles, including abstract, devicelink and named color
 profiles.
 .
 This package contains the shared library of liblcms2.
Homepage: http://www.littlecms.com/

Package: liblcms2-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1904
Maintainer: Thomas Weber <tweber@debian.org>
Architecture: amd64
Multi-Arch: same
Source: lcms2
Version: 2.14-2+deb12u1
Replaces: liblcms-dev
Provides: liblcms-dev
Depends: liblcms2-2 (= 2.14-2+deb12u1)
Conflicts: liblcms-dev
Description: Little CMS 2 color management library development headers
 LittleCMS 2 intends to be a small-footprint color management engine, with
 special focus on accuracy and performance. It uses the International Color
 Consortium standard (ICC) of color management. Little CMS 2 is a full
 implementation of ICC specification 4.2 plus all addendums. It fully supports
 all V2 and V4 profiles, including abstract, devicelink and named color
 profiles.
 .
 This package contains the development headers used for building software that
 uses Little CMS.
Homepage: http://www.littlecms.com/

Package: libldap-2.5-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 553
Maintainer: Debian OpenLDAP Maintainers <pkg-openldap-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: openldap
Version: 2.5.13+dfsg-5
Replaces: libldap-2.3-0, libldap2
Depends: libc6 (>= 2.34), libgnutls30 (>= 3.7.5), libsasl2-2 (>= 2.1.28+dfsg)
Recommends: libldap-common
Conflicts: ldap-utils (<= 2.1.23-1)
Description: OpenLDAP libraries
 These are the run-time libraries for the OpenLDAP (Lightweight Directory
 Access Protocol) servers and clients.
Homepage: https://www.openldap.org/

Package: liblerc-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 978
Maintainer: Debian GIS Project <pkg-grass-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: lerc
Version: 4.0.0+ds-2
Depends: liblerc4 (= 4.0.0+ds-2)
Description: Limited Error Raster Compression library (Development files)
 LERC is an open-source image or raster format which
 supports rapid encoding and decoding for any pixel
 type (not just RGB or Byte). Users set the maximum
 compression error per pixel while encoding, so the
 precision of the original input image is preserved
 (within user defined error bounds).
 .
 This is a development package of LERC.
Homepage: https://github.com/Esri/lerc

Package: liblerc4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 649
Maintainer: Debian GIS Project <pkg-grass-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: lerc
Version: 4.0.0+ds-2
Depends: libc6 (>= 2.29), libgcc-s1 (>= 3.0), libstdc++6 (>= 11)
Description: Limited Error Raster Compression library
 LERC is an open-source image or raster format which
 supports rapid encoding and decoding for any pixel
 type (not just RGB or Byte). Users set the maximum
 compression error per pixel while encoding, so the
 precision of the original input image is preserved
 (within user defined error bounds).
Homepage: https://github.com/Esri/lerc

Package: liblilv-0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 139
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: lilv
Version: 0.24.14-1
Depends: libc6 (>= 2.33), libserd-0-0 (>= 0.30.2), libsord-0-0 (>= 0.14.0~dfsg0), libsratom-0-0 (>= 0.4.6~dfsg0)
Description: library for simple use of LV2 plugins
 Lilv (formerly SLV2) is a library for LV2 hosts intended to make using
 LV2 Plugins as simple as possible (without sacrificing capabilities).
 .
 Lilv is the successor to SLV2, rewritten to be significantly faster
 and have minimal dependencies.
 .
 This package provides the shared library.
Homepage: https://drobilla.net/software/lilv/

Package: liblinear4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 102
Maintainer: Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: liblinear
Version: 2.3.0+dfsg-5
Depends: libblas3 | libblas.so.3, libc6 (>= 2.29), libgcc-s1 (>= 3.0), libstdc++6 (>= 5)
Suggests: liblinear-tools (= 2.3.0+dfsg-5), liblinear-dev (= 2.3.0+dfsg-5)
Description: Library for Large Linear Classification
 LIBLINEAR is a library for learning linear classifiers for large scale
 applications. It supports Support Vector Machines (SVM) with L2 and L1
 loss, logistic regression, multi class classification and also Linear
 Programming Machines (L1-regularized SVMs). Its computational complexity
 scales linearly with the number of training examples making it one of
 the fastest SVM solvers around. It also provides Python bindings.
 .
 This package contains the shared libraries.
Homepage: https://www.csie.ntu.edu.tw/~cjlin/liblinear/

Package: libllvm15
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 114610
Maintainer: LLVM Packaging Team <pkg-llvm-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: llvm-toolchain-15 (1:15.0.6-4)
Version: 1:15.0.6-4+b1
Depends: libc6 (>= 2.36), libedit2 (>= 2.11-20080614-0), libffi8 (>= 3.4), libgcc-s1 (>= 3.3), libstdc++6 (>= 12), libtinfo6 (>= 6), libxml2 (>= 2.7.4), libz3-4 (>= 4.8.12), zlib1g (>= 1:1.2.0)
Description: Modular compiler and toolchain technologies, runtime library
 LLVM is a collection of libraries and tools that make it easy to build
 compilers, optimizers, just-in-time code generators, and many other
 compiler-related programs.
 .
 This package contains the LLVM runtime library.
Homepage: https://www.llvm.org/

Package: liblmdb0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 104
Maintainer: LMDB <lmdb@packages.debian.org>
Architecture: amd64
Multi-Arch: same
Source: lmdb
Version: 0.9.24-1
Depends: libc6 (>= 2.14)
Description: Lightning Memory-Mapped Database shared library
 This package contains the LMDB shared library.
 .
 Lighting Memory-Mapped Database (LMDB) is an ultra-fast, ultra-compact
 key-value embedded data store developed for the OpenLDAP Project.  It uses
 memory-mapped files, so it has the read performance of a pure in-memory
 database while still offering the persistence of standard disk-based
 databases, and is only limited to the size of the virtual address space, (it
 is not limited to the size of physical RAM).
Homepage: http://symas.com/mdb/

Package: liblocale-gettext-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 51
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Version: 1.07-5
Depends: libc6 (>= 2.3)
Pre-Depends: perl-base (>= 5.36.0-5), perlapi-5.36.0
Description: module using libc functions for internationalization in Perl
 The Locale::gettext module permits access from perl to the gettext() family of
 functions for retrieving message strings from databases constructed
 to internationalize software.
 .
 It provides gettext(), dgettext(), dcgettext(), textdomain(),
 bindtextdomain(), bind_textdomain_codeset(), ngettext(), dcngettext()
 and dngettext().
Homepage: https://metacpan.org/release/gettext

Package: liblockfile-bin
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 53
Maintainer: Miquel van Smoorenburg <miquels@cistron.nl>
Architecture: amd64
Multi-Arch: foreign
Source: liblockfile (1.17-1)
Version: 1.17-1+b1
Replaces: liblockfile1 (<< 1.09-1)
Depends: libc6 (>= 2.14)
Breaks: liblockfile1 (<< 1.09-1)
Description: support binaries for and cli utilities based on liblockfile
 This package contains support binaries for the liblockfile library,
 and the command-line utility ``dotlockfile''.
Homepage: https://github.com/miquels/liblockfile

Package: liblockfile1
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 45
Maintainer: Miquel van Smoorenburg <miquels@cistron.nl>
Architecture: amd64
Multi-Arch: same
Source: liblockfile (1.17-1)
Version: 1.17-1+b1
Depends: libc6 (>= 2.4), liblockfile-bin (>= 1.17-1+b1)
Description: NFS-safe locking library
 Liblockfile is a shared library with NFS-safe locking functions.
Homepage: https://github.com/miquels/liblockfile

Package: liblqr-1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 76
Maintainer: Bernd Zeimetz <bzed@debian.org>
Architecture: amd64
Multi-Arch: same
Source: liblqr
Version: 0.4.2-2.1
Depends: libc6 (>= 2.2.5), libglib2.0-0 (>= 2.24.0)
Description: converts plain array images into multi-size representation
 The LiquidRescale (lqr) library provides a C/C++ API for performing
 non-uniform resizing of images by the seam-carving technique.
 .
 The library takes images in plain array format as input and converts
 them to a multi-size representation.
 .
 Following is a list of features:
 .
   * Areas in the image can be marked for preservation or discard
   * Once the image has been fully processed, the scaling can be done
     in real-time. In fact, the information can be saved and read out
     later without any further processing
   * The resizing is done with a single function which automatically
     performs all the necessary operations; it can also work in
     successive steps without wasting computational time
   * Possibility to tune the carving operation by letting the seams be
     less connected, or more rigid, or both
   * Can export and import the visibility map (the seams)
   * Other images can be attached and undergo the same carving process
     as the parent image
   * The automatic feature detection algorithm can be tuned by
     selecting among different energy gradient functions
   * Reports progress through a customizable interface
   * A signalling system permits one to cleanly handle errors
 .
 The library implements the algorithm described in the paper "Seam
 Carving for Content-Aware Image Resizing" by Shai Avidan and Ariel
 Shamir, which can be found at
 http://www.faculty.idc.ac.il/arik/imret.pdf
 .
 This package contains the shared library.
Homepage: http://liblqr.wikidot.com/

Package: liblsan0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2942
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.2.0-14+deb12u1
Depends: gcc-12-base (= 12.2.0-14+deb12u1), libc6 (>= 2.34), libgcc-s1 (>= 3.3)
Description: LeakSanitizer -- a memory leak detector (runtime)
 LeakSanitizer (Lsan) is a memory leak detector which is integrated
 into AddressSanitizer.
Homepage: http://gcc.gnu.org/

Package: libltdl-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 941
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libtool
Version: 2.4.7-7~deb12u1
Replaces: libbtldl3-dev
Provides: libltdl3-dev, libltdl7-dev
Depends: libltdl7 (= 2.4.7-7~deb12u1), automake-1.16
Recommends: libtool
Suggests: libtool-doc
Conflicts: libltdl3-dev
Description: System independent dlopen wrapper for GNU libtool (headers)
 This package contains the header files and static libraries for the
 libltdl package.
 .
 A small library that aims at hiding the various difficulties of
 dlopening libraries from programmers.  It is a system independent
 dlopen wrapper for GNU libtool.
 .
 It supports the following dlopen interfaces:
   * dlopen (Solaris, Linux and various BSD flavors)
   * shl_load (HP-UX)
   * LoadLibrary (Win16 and Win32)
   * load_add_on (BeOS)
   * GNU DLD (emulates dynamic linking for static libraries)
   * libtool's dlpreopen
Homepage: https://www.gnu.org/software/libtool/

Package: libltdl7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 421
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libtool
Version: 2.4.7-7~deb12u1
Depends: libc6 (>= 2.34)
Description: System independent dlopen wrapper for GNU libtool
 This package contains the run-time libltdl library.
 .
 A small library that aims at hiding the various difficulties of
 dlopening libraries from programmers.  It is a system independent
 dlopen wrapper for GNU libtool.
 .
 It supports the following dlopen interfaces:
   * dlopen (Solaris, Linux and various BSD flavors)
   * shl_load (HP-UX)
   * LoadLibrary (Win16 and Win32)
   * load_add_on (BeOS)
   * GNU DLD (emulates dynamic linking for static libraries)
   * libtool's dlpreopen
Homepage: https://www.gnu.org/software/libtool/

Package: liblua5.3-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 495
Maintainer: Debian Lua Team <pkg-lua-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: lua5.3
Version: 5.3.6-2
Depends: libc6 (>= 2.34), libstdc++6 (>= 4.1.1)
Description: Shared library for the Lua interpreter version 5.3
 Lua is a powerful, light-weight programming language designed for extending
 applications.  The language engine is accessible as a library, having a C
 API which allows the application to exchange data with Lua programs and also
 to extend Lua with C functions.  Lua is also used as a general-purpose,
 stand-alone language through the simple command line interpreter provided.
 .
 This package contains runtime libraries.  You shouldn't need to install it
 explicitly.
Homepage: https://www.lua.org

Package: liblwp-mediatypes-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 74
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 6.04-2
Depends: perl:any
Description: module to guess media type for a file or a URL
 LWP::MediaTypes provides functions for handling media (also known as MIME)
 types and encodings. The mapping from file extensions to media types is
 defined by the media.types file. If the ~/.media.types file exists it is used
 instead. For backwards compatibility it will also look for ~/.mime.types.
Homepage: https://metacpan.org/release/LWP-MediaTypes

Package: liblz4-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 169
Maintainer: Nobuhiro Iwamatsu <iwamatsu@debian.org>
Architecture: amd64
Multi-Arch: same
Source: lz4
Version: 1.9.4-1
Replaces: liblz4-1a
Depends: libc6 (>= 2.14)
Breaks: liblz4-1a
Description: Fast LZ compression algorithm library - runtime
 LZ4 is a very fast lossless compression algorithm, providing compression speed
 at 400 MB/s per core, scalable with multi-cores CPU. It also features an
 extremely fast decoder, with speed in multiple GB/s per core, typically
 reaching RAM speed limits on multi-core systems.
 .
 This package includes the shared library.
Homepage: https://github.com/lz4/lz4

Package: liblzf1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 39
Maintainer: Timo Röhling <timo@gaussglocke.de>
Architecture: amd64
Multi-Arch: same
Source: liblzf
Version: 3.6-3
Depends: libc6 (>= 2.4)
Description: Very small data compression library
 This library implements the very, very fast LZF compression algorithm written
 in C. Compression ratios are moderate with 40 to 50 percent for typical
 binary data, but decompression speed is basically at unoptimized memcpy
 speed.
Homepage: http://software.schmorp.de/pkg/liblzf.html

Package: liblzma-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 726
Maintainer: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Architecture: amd64
Multi-Arch: same
Source: xz-utils
Version: 5.4.1-1+deb12u1
Depends: liblzma5 (= 5.4.1-1+deb12u1)
Suggests: liblzma-doc
Description: XZ-format compression library - development files
 XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
 compression format, which provides memory-hungry but powerful
 compression (often better than bzip2) and fast, easy decompression.
 .
 The native format of liblzma is XZ; it also supports raw (headerless)
 streams and the older LZMA format used by lzma. (For 7-Zip's related
 format, use the p7zip package instead.) This package provides the
 development library needed to build programs using liblzma.
Homepage: https://tukaani.org/xz/

Package: liblzma5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 333
Maintainer: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Architecture: amd64
Multi-Arch: same
Source: xz-utils
Version: 5.4.1-1+deb12u1
Depends: libc6 (>= 2.34)
Breaks: liblzma2 (<< 5.1.1alpha+20110809-3~)
Description: XZ-format compression library
 XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
 compression format, which provides memory-hungry but powerful
 compression (often better than bzip2) and fast, easy decompression.
 .
 The native format of liblzma is XZ; it also supports raw (headerless)
 streams and the older LZMA format used by lzma. (For 7-Zip's related
 format, use the p7zip package instead.)
Homepage: https://tukaani.org/xz/

Package: liblzo2-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 174
Maintainer: Stephen Kitt <skitt@debian.org>
Architecture: amd64
Multi-Arch: same
Source: lzo2
Version: 2.10-2
Depends: libc6 (>= 2.14)
Description: data compression library
 LZO is a portable, lossless data compression library.
 It offers pretty fast compression and very fast decompression.
 Decompression requires no memory.  In addition there are slower
 compression levels achieving a quite competitive compression ratio
 while still decompressing at this very high speed.
Homepage: https://www.oberhumer.com/opensource/lzo/

Package: libmagic-mgc
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 8130
Maintainer: Christoph Biedl <debian.axhn@manchmal.in-ulm.de>
Architecture: amd64
Multi-Arch: foreign
Source: file
Version: 1:5.44-3
Replaces: libmagic1 (<< 1:5.28-4~)
Breaks: libmagic1 (<< 1:5.28-4~)
Description: File type determination library using "magic" numbers (compiled magic file)
 This package provides the compiled magic file "magic.mgc". It has
 been separated from libmagic1 in order to meet the multiarch
 requirements without breaking applications that expect this file
 at its absolute path.
Homepage: https://www.darwinsys.com/file/

Package: libmagic1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 232
Maintainer: Christoph Biedl <debian.axhn@manchmal.in-ulm.de>
Architecture: amd64
Multi-Arch: same
Source: file
Version: 1:5.44-3
Depends: libbz2-1.0, libc6 (>= 2.33), liblzma5 (>= 5.1.1alpha+20120614), zlib1g (>= 1:1.1.4), libmagic-mgc (= 1:5.44-3)
Suggests: file
Conffiles:
 /etc/magic 272913026300e7ae9b5e2d51f138e674
 /etc/magic.mime 272913026300e7ae9b5e2d51f138e674
Description: Recognize the type of data in a file using "magic" numbers - library
 This library can be used to classify files according to magic number
 tests. It implements the core functionality of the file command.
Homepage: https://www.darwinsys.com/file/

Package: libmagickcore-6.q16-6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 6645
Maintainer: ImageMagick Packaging Team <pkg-gmagick-im-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: imagemagick
Version: 8:6.9.11.60+dfsg-1.6+deb12u13
Depends: libbz2-1.0, libc6 (>= 2.35), libfftw3-double3 (>= 3.3.10), libfontconfig1 (>= 2.12.6), libfreetype6 (>= 2.10.1), libgcc-s1 (>= 3.3.1), libgomp1 (>= 6), libheif1 (>= 1.4.0), libjbig0 (>= 2.0), libjpeg62-turbo (>= 1.3.1), liblcms2-2 (>= 2.6), liblqr-1-0 (>= 0.4.0), libltdl7 (>= 2.4.7), liblzma5 (>= 5.1.1alpha+20120614), libopenjp2-7 (>= 2.0.0), libpng16-16 (>= 1.6.2-1), libtiff6 (>= 4.5.0~rc1), libwebp7 (>= 1.2.4), libwebpdemux2 (>= 1.2.4), libwebpmux3 (>= 1.2.4), libx11-6, libxext6, libxml2 (>= 2.7.4), zlib1g (>= 1:1.1.4), imagemagick-6-common (>= 8:6.9.6.2+dfsg-3)
Pre-Depends: dpkg (>= 1.17.6)
Recommends: ghostscript, gsfonts
Suggests: libmagickcore-6.q16-6-extra
Description: low-level image manipulation library -- quantum depth Q16
 The MagickCore API is a low-level interface between the C programming language
 and the ImageMagick image processing libraries and is recommended for
 wizard-level programmers only. Unlike the MagickWand C API which uses only a
 few opaque types and accessors, with MagickCore you almost exclusively access
 the structure members directly.
 .
 This package contains the C libraries needed to run executables that make
 use of MagickCore.
 .
 This version of libmagickcore is compiled for a channel
 depth of 16 bits (Q16).
Homepage: https://www.imagemagick.org/

Package: libmagickcore-6.q16-6-extra
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 401
Maintainer: ImageMagick Packaging Team <pkg-gmagick-im-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: imagemagick
Version: 8:6.9.11.60+dfsg-1.6+deb12u13
Provides: libmagickcore-6.q16-1-extra, libmagickcore-6.q16-2-extra, libmagickcore-6.q16-3-extra, libmagickcore-6.q16-4-extra, libmagickcore-6.q16-5-extra, libmagickcore-extra
Depends: libc6 (>= 2.35), libcairo2 (>= 1.6.0), libdjvulibre21 (>= 3.5.28), libglib2.0-0 (>= 2.12.0), libmagickcore-6.q16-6 (>= 8:6.9.11.24), libmagickwand-6.q16-6 (>= 8:6.9.10.2), libopenexr-3-1-30 (>= 3.1.5), libpango-1.0-0 (>= 1.22.0), libpangocairo-1.0-0 (>= 1.14.0), libwmflite-0.2-7 (>= 0.2.12), libxml2 (>= 2.7.4)
Recommends: libjxr-tools
Suggests: inkscape
Enhances: libmagickcore-6.q16-6
Description: low-level image manipulation library - extra codecs (Q16)
 This package adds support for SVG, WMF, OpenEXR, DjVu and Graphviz to
 MagickCore.
 .
 This version of libmagickcore-extra is compiled for a channel
 depth of 16 bits (Q16).
Homepage: https://www.imagemagick.org/

Package: libmagickwand-6.q16-6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1389
Maintainer: ImageMagick Packaging Team <pkg-gmagick-im-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: imagemagick
Version: 8:6.9.11.60+dfsg-1.6+deb12u13
Depends: libc6 (>= 2.33), libgcc-s1 (>= 3.3.1), libgomp1 (>= 4.9), libmagickcore-6.q16-6 (>= 8:6.9.11.60+dfsg-1.6+deb12u13), libx11-6, imagemagick-6-common (>= 8:6.9.6.2+dfsg-3)
Pre-Depends: dpkg (>= 1.17.6)
Description: image manipulation library -- quantum depth Q16
 The MagickWand API is the recommended interface between the C programming
 language and the ImageMagick image processing libraries. Unlike the
 MagickCore C API, MagickWand uses only a few opaque types. Accessors are
 available to set or get important wand properties.
 .
 This package contains the C libraries needed to run executables that make
 use of MagickWand.
 .
 This version of libmagickwand is compiled for a channel
 depth of 16 bits (Q16).
Homepage: https://www.imagemagick.org/

Package: libmariadb3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 534
Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: mariadb
Version: 1:10.11.18-0+deb12u1
Replaces: libmariadbclient18
Depends: mariadb-common, libc6 (>= 2.34), libssl3 (>= 3.0.0), zlib1g (>= 1:1.1.4)
Breaks: libmariadbclient18
Conflicts: mariadb-galera-server-10.0, mariadb-galera-server-5.5, mariadb-server-10.0, mariadb-server-5.1, mariadb-server-5.2, mariadb-server-5.3, mariadb-server-5.5
Description: MariaDB database client library
 MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MariaDB are speed, robustness and
 ease of use.
 .
 This package includes the client library.
Homepage: https://mariadb.org/

Package: libmaxminddb0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 76
Maintainer: Faidon Liambotis <paravoid@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libmaxminddb
Version: 1.7.1-1
Depends: libc6 (>= 2.33)
Suggests: mmdb-bin
Description: IP geolocation database library
 The libmaxminddb library provides a C library for reading MaxMind DB files,
 including the GeoIP2 databases from MaxMind. This is a custom binary format
 designed to facilitate fast lookups of IP addresses while allowing for great
 flexibility in the type of data associated with an address.
 .
 The MaxMind DB format is an open format. The spec is available at
 http://maxmind.github.io/MaxMind-DB/. This spec is licensed under the Creative
 Commons Attribution-ShareAlike 3.0 Unported License.
Homepage: https://maxmind.github.io/libmaxminddb/

Package: libmbedcrypto7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 615
Maintainer: Andrea Pappacoda <andrea@pappacoda.it>
Architecture: amd64
Multi-Arch: same
Source: mbedtls
Version: 2.28.3-1
Depends: libc6 (>= 2.14)
Description: lightweight crypto and SSL/TLS library - crypto library
 mbed TLS (formerly known as PolarSSL) is a lean open source crypto library for
 providing SSL and TLS support in your programs. It offers an intuitive API and
 documented header files, so you can actually understand what the code does.
 It features:
  - Symmetric algorithms, like AES, Blowfish, Triple-DES, DES, ARC4, Camellia
    and XTEA
  - Hash algorithms, like SHA-1, SHA-2, RIPEMD-160 and MD5
  - Entropy pool and random generators, like CTR-DRBG and HMAC-DRBG
  - Public key algorithms, like RSA, Elliptic Curves, Diffie-Hellman, ECDSA
    and ECDH
  - TLS 1.0, 1.1 and 1.2
  - Abstraction layers for ciphers, hashes, public key operations, platform
    abstraction and threading
 .
 This package contains the shared library handling cryptography.
Homepage: https://www.trustedfirmware.org/projects/mbed-tls/

Package: libmd0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 79
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libmd
Version: 1.0.4-2
Depends: libc6 (>= 2.33)
Description: message digest functions from BSD systems - shared library
 The libmd library provides various message digest ("hash") functions,
 as found on various BSDs on a library with the same name and with a
 compatible API.
Homepage: https://www.hadrons.org/software/libmd/

Package: libmfx1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 27346
Maintainer: Timo Aaltonen <tjaalton@debian.org>
Architecture: amd64
Multi-Arch: same
Source: intel-mediasdk
Version: 22.5.4-1
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libstdc++6 (>= 12), libva2 (>= 2.9.0)
Description: Intel Media SDK -- shared library
 Intel® Media SDK provides an API to access hardware-accelerated video decode,
 encode and filtering on Intel® platforms with integrated graphics.
 .
 Supported video encoders: HEVC, AVC, MPEG-2, JPEG
 Supported Video decoders: HEVC, AVC, VP8, MPEG-2, VC1, JPEG
 Supported video pre-processing filters: Color Conversion, Deinterlace, Denoise,
 Resize, Rotate, Composition
 .
 This package contains the shared library.
Homepage: https://github.com/Intel-Media-SDK/MediaSDK

Package: libmime-charset-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 96
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.013.1-2
Depends: perl:any
Suggests: libencode-eucjpascii-perl, libencode-hanextra-perl, libpod2-base-perl
Description: module for MIME character set information
 MIME::Charset provides information about character sets specified in the MIME
 (Multipurpose Internet Mail Extensions) format. It is often used to describe
 character set and encoding information for messages on the Internet.
 .
 This module allows one to work with character sets and encodings, providing
 a simple facility for converting between them.
Homepage: https://metacpan.org/release/MIME-Charset

Package: libmnl0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 46
Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libmnl
Version: 1.0.4-3
Depends: libc6 (>= 2.14)
Description: minimalistic Netlink communication library
 libmnl is a minimalistic user-space library oriented to Netlink developers.
 There are a lot of common tasks in parsing, validating, constructing of
 both the Netlink header and TLVs that are repetitive and easy to get wrong.
 This library aims to provide simple helpers that allows you to re-use code
 and to avoid re-inventing the wheel.
 .
 The main features of this library are:
 .
 Small: the shared library requires around 30KB for an x86-based computer.
 .
 Simple: this library avoids complexity and elaborated abstractions that
 tend to hide Netlink details.
 .
 Easy to use: the library simplifies the work for Netlink-wise developers.
 It provides functions to make socket handling, message building,
 validating, parsing and sequence tracking, easier.
 .
 Easy to re-use: you can use the library to build your own abstraction
 layer on top of this library.
 .
 Decoupling: the interdependency of the main bricks that compose the
 library is reduced, i.e. the library provides many helpers, but the
 programmer is not forced to use them.
 .
 This package contains the shared libraries needed to run programs that use
 the minimalistic Netlink communication library.
Homepage: https://netfilter.org/projects/libmnl/

Package: libmount1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 454
Maintainer: util-linux packagers <util-linux@packages.debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.38.1-5+deb12u3
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.34), libselinux1 (>= 3.1~)
Suggests: cryptsetup-bin
Description: device mounting library
 This device mounting library is used by mount and umount helpers.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/

Package: libmp3lame0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 544
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: lame
Version: 3.100-6
Depends: libc6 (>= 2.29)
Description: MP3 encoding library
 LAME (recursive acronym for "LAME Ain't an MP3 Encoder") is a research
 project for learning about and improving MP3 encoding technology.
 LAME includes an MP3 encoding library, a simple frontend application,
 and other tools for sound analysis, as well as convenience tools.
 .
 This package contains the shared library.
Homepage: https://lame.sourceforge.io/

Package: libmpc3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 149
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: mpclib3
Version: 1.3.1-1
Depends: libc6 (>= 2.4), libgmp10 (>= 2:6.2.1+dfsg1), libmpfr6 (>= 4.0.0)
Description: multiple precision complex floating-point library
 MPC is a portable library written in C for arbitrary precision
 arithmetic on complex numbers providing correct rounding. For the time
 being, it contains all arithmetic operations over complex numbers, the
 exponential and the logarithm functions, the trigonometric and
 hyperbolic functions.
 .
 Ultimately, it should implement a multiprecision equivalent of the ISO
 C99 standard.
 .
 It builds upon the GNU MP and the MPFR libraries.
Homepage: http://www.multiprecision.org/mpc/

Package: libmpfr6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1177
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: mpfr4
Version: 4.2.0-1
Depends: libc6 (>= 2.14), libgmp10 (>= 2:6.2.1+dfsg1)
Breaks: libcgal13 (<< 4.11-2+b1), libflint-2.5.2 (<< 2.5.2-17+b2), libgiac0 (<< 1.2.3.57+dfsg1-2+b4), libgmp3 (<< 4.1.4-3), libmpc3 (<< 1.1.0-1~), libnormaliz3 (<< 3.5.1+ds-4), sagemath (<< 8.1-2+b2)
Description: multiple precision floating-point computation
 MPFR provides a library for multiple-precision floating-point computation
 with correct rounding.  The computation is both efficient and has a
 well-defined semantics. It copies the good ideas from the
 ANSI/IEEE-754 standard for double-precision floating-point arithmetic
 (53-bit mantissa).
Homepage: https://www.mpfr.org/

Package: libmpg123-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 389
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: mpg123
Version: 1.31.2-1+deb12u1
Depends: libc6 (>= 2.33)
Description: MPEG layer 1/2/3 audio decoder (shared library)
 mpg123 is a real time MPEG 1.0/2.0/2.5 audio player/decoder for layers
 1, 2 and 3 (MPEG 1.0 layer 3 also known as MP3).
 .
 This package contains the C libraries needed to run executables that use
 the mpg123 library.
Homepage: http://mpg123.org/

Package: libmspack0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 108
Maintainer: Marc Dequènes (Duck) <Duck@DuckCorp.org>
Architecture: amd64
Multi-Arch: same
Source: libmspack
Version: 0.11-1
Depends: libc6 (>= 2.14)
Description: library for Microsoft compression formats (shared library)
 The purpose of libmspack is to provide both compression and decompression of
 some loosely related file formats used by Microsoft. The intention is to
 support all of the following formats: COMPRESS.EXE [SZDD],
 Microsoft Help (.HLP), COMPRESS.EXE [KWAJ], Microsoft Cabinet (.CAB),
 HTML Help (.CHM), Microsoft eBook (.LIT), Windows Imaging Format (.WIM),
 Exchange Offline Address Book (.LZX).
Homepage: https://www.cabextract.org.uk/libmspack/

Package: libmysofa1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1266
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libmysofa
Version: 1.3.1~dfsg0-1
Depends: libc6 (>= 2.29), zlib1g (>= 1:1.1.4)
Description: library to read HRTFs stored in the AES69-2015 SOFA format
 libmysofa is a light weight C-library intended to read SOFA (Spatially Oriented
 Format for Acoustics) files for spatial rendering.
 It hardly has any library dependencies and is suitable for embedded devices.
 .
 It reads SOFA files and checks whether the data complies to the
 "SimpleFreeFieldHRIR" conventions. In addition, it provides functions to
 look-up and interpolate the filters for a given orientation and to normalize
 the HRTFs (Head-Related Transfer Functions) to a reference level.
 .
 This package contains the shared objects necessary to run an application using
 libmysofa.
Homepage: https://github.com/hoene/libmysofa

Package: libncurses6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 335
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.4-4
Depends: libtinfo6 (= 6.4-4), libc6 (>= 2.34)
Recommends: libgpm2
Breaks: cowdancer (<< 0.89~)
Description: shared libraries for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncurses.
Homepage: https://invisible-island.net/ncurses/

Package: libncursesw6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 412
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.4-4
Depends: libtinfo6 (= 6.4-4), libc6 (>= 2.34)
Recommends: libgpm2
Description: shared libraries for terminal handling (wide character support)
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncursesw, which includes support for wide characters.
Homepage: https://invisible-island.net/ncurses/

Package: libnetfilter-conntrack3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 139
Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libnetfilter-conntrack
Version: 1.0.9-3
Depends: libc6 (>= 2.14), libmnl0 (>= 1.0.3-4~), libnfnetlink0 (>= 1.0.2)
Description: Netfilter netlink-conntrack library
 libnetfilter_conntrack is a userspace library providing a programming
 interface (API) to the in-kernel connection tracking state table.
Homepage: https://www.netfilter.org/projects/libnetfilter_conntrack/

Package: libnetpbm11
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 396
Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: netpbm-free
Version: 2:11.01.00-2
Provides: libnetpbm10-dev
Depends: libc6 (>= 2.33)
Description: Graphics conversion tools shared libraries
 Netpbm is a toolkit for manipulation of graphic images, including
 conversion of images between a variety of different formats. There
 are over 220 separate tools in the package including converters for
 more than 80 graphics formats.
 .
 This package contains the shared libraries used by netpbm.
Homepage: https://netpbm.sourceforge.net/

Package: libnetplan0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 309
Maintainer: Debian netplan Maintainers <team+netplan@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: netplan.io
Version: 0.106-2+deb12u1
Depends: libc6 (>= 2.33), libglib2.0-0 (>= 2.70.0), libuuid1 (>= 2.16), libyaml-0-2
Description: YAML network configuration abstraction runtime library
 netplan reads YAML network configuration files which are written
 by administrators, installers, cloud image instantiations, or other OS
 deployments. During early boot it then generates backend specific
 configuration files in /run to hand off control of devices to a particular
 networking daemon.
 .
 Currently supported backends are networkd and NetworkManager.
 .
 This package contains the necessary runtime library files.
Homepage: https://netplan.io/

Package: libnettle8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 520
Maintainer: Magnus Holmgren <holmgren@debian.org>
Architecture: amd64
Multi-Arch: same
Source: nettle
Version: 3.8.1-2
Depends: libc6 (>= 2.17)
Description: low level cryptographic library (symmetric and one-way cryptos)
 Nettle is a cryptographic library that is designed to fit easily in more or
 less any context: In crypto toolkits for object-oriented languages (C++,
 Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel
 space.
 .
 It tries to solve a problem of providing a common set of cryptographic
 algorithms for higher-level applications by implementing a
 context-independent set of cryptographic algorithms. In that light, Nettle
 doesn't do any memory allocation or I/O, it simply provides the
 cryptographic algorithms for the application to use in any environment and
 in any way it needs.
 .
 This package contains the symmetric and one-way cryptographic
 algorithms. To avoid having this package depend on libgmp, the
 asymmetric cryptos reside in a separate library, libhogweed.
Homepage: http://www.lysator.liu.se/~nisse/nettle/

Package: libnewt0.52
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 365
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Architecture: amd64
Multi-Arch: same
Source: newt (0.52.23-1)
Version: 0.52.23-1+b1
Depends: libc6 (>= 2.34), libslang2 (>= 2.2.4)
Recommends: libfribidi0
Description: Not Erik's Windowing Toolkit - text mode windowing with slang
 Newt is a windowing toolkit for text mode built from the slang library.
 It allows color text mode applications to easily use stackable windows,
 push buttons, check boxes, radio buttons, lists, entry fields, labels,
 and displayable text. Scrollbars are supported, and forms may be nested
 to provide extra functionality. This package contains the shared library
 for programs that have been built with newt.
Homepage: https://pagure.io/newt

Package: libnfnetlink0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 51
Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libnfnetlink
Version: 1.0.2-2
Depends: libc6 (>= 2.14)
Description: Netfilter netlink library
 libnfnetlink is the low-level library for netfilter related
 kernel/userspace communication. It provides a generic messaging
 infrastructure for in-kernel netfilter subsystems (such as
 nfnetlink_log, nfnetlink_queue, nfnetlink_conntrack) and their
 respective users and/or management tools in userspace.
Homepage: https://git.netfilter.org/libnfnetlink

Package: libnftables1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 920
Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: nftables
Version: 1.0.6-2+deb12u2
Depends: libc6 (>= 2.34), libgmp10 (>= 2:6.2.1+dfsg1), libjansson4 (>= 2.14), libmnl0 (>= 1.0.3-4~), libnftnl11 (>= 1.2.2), libxtables12 (>= 1.6.0+snapshot20161117)
Description: Netfilter nftables high level userspace API library
 This library provides high level semantics to interact with the nftables
 framework by Netfilter project.
 .
 nftables replaces the old popular iptables, ip6tables, arptables and ebtables.
 .
 Netfilter software and nftables in particular are used in applications such
 as Internet connection sharing, firewalls, IP accounting, transparent
 proxying, advanced routing and traffic control.
 .
 A Linux kernel >= 3.13 is required. However, >= 4.14 is recommended.
 .
 This package contains the libnftables library.
Homepage: https://www.netfilter.org/

Package: libnftnl11
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 233
Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libnftnl
Version: 1.2.4-2
Depends: libc6 (>= 2.34), libmnl0 (>= 1.0.3-4~)
Description: Netfilter nftables userspace API library
 libnftnl is the low-level library for Netfilter 4th generation
 framework nftables.
 .
 Is the user-space library for low-level interaction with
 nftables Netlink's API over libmnl.
Homepage: https://git.netfilter.org/libnftnl

Package: libnghttp2-14
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 220
Maintainer: Tomasz Buchert <tomasz@debian.org>
Architecture: amd64
Multi-Arch: same
Source: nghttp2
Version: 1.52.0-1+deb12u3
Depends: libc6 (>= 2.17)
Description: library implementing HTTP/2 protocol (shared library)
 This is an implementation of the Hypertext Transfer Protocol version
 2 in C. The framing layer of HTTP/2 is implemented as a reusable C
 library.
 .
 This package installs a shared library.
Homepage: https://nghttp2.org/

Package: libnl-3-200
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 182
Maintainer: Heiko Stuebner <mmind@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libnl3 (3.7.0-0.2)
Version: 3.7.0-0.2+b1
Depends: libc6 (>= 2.34)
Conffiles:
 /etc/libnl-3/classid 3e07259e58674631830b152e983ca995
 /etc/libnl-3/pktloc 7613dbc41b2dc3258195b6b6abd0f179
Description: library for dealing with netlink sockets
 This is a library for applications dealing with netlink sockets.
 The library provides an interface for raw netlink messaging and various
 netlink family specific interfaces.
Homepage: http://www.infradead.org/~tgr/libnl/

Package: libnl-genl-3-200
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 58
Maintainer: Heiko Stuebner <mmind@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libnl3 (3.7.0-0.2)
Version: 3.7.0-0.2+b1
Depends: libnl-3-200 (= 3.7.0-0.2+b1), libc6 (>= 2.4)
Description: library for dealing with netlink sockets - generic netlink
 This is a library for applications dealing with netlink sockets.
 The library provides an interface for raw netlink messaging and various
 netlink family specific interfaces.
 .
 API to the generic netlink protocol, an extended version of the netlink
 protocol.
Homepage: http://www.infradead.org/~tgr/libnl/

Package: libnm0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1506
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: network-manager
Version: 1.42.4-1+deb12u1
Depends: libc6 (>= 2.34), libglib2.0-0 (>= 2.43.2), libgnutls30 (>= 3.7.2), libudev1 (>= 183)
Description: GObject-based client library for NetworkManager
 NetworkManager is a system network service that manages your network devices
 and connections, attempting to keep active network connectivity when
 available. It manages ethernet, Wi-Fi, mobile broadband (WWAN), and PPPoE
 devices, and provides VPN integration with a variety of different VPN
 services.
 .
 This package contains a convenience library to ease the access to
 NetworkManager.
Homepage: https://wiki.gnome.org/Projects/NetworkManager

Package: libnorm1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 506
Maintainer: Luca Boccassi <bluca@debian.org>
Architecture: amd64
Multi-Arch: same
Source: norm
Version: 1.5.9+dfsg-2
Depends: libc6 (>= 2.29), libgcc-s1 (>= 3.0), libstdc++6 (>= 5)
Description: NACK-Oriented Reliable Multicast (NORM) library
 The NORM protocol is designed to provide end-to-end reliable transport of
 bulk data objects or streams over generic IP multicast routing and forwarding
 services.
 libnorm provides a shared library and an API to use such protocol.
Homepage: https://www.nrl.navy.mil/itd/ncs/products/norm

Package: libnpth0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 50
Maintainer: Eric Dorland <eric@debian.org>
Architecture: amd64
Multi-Arch: same
Source: npth
Version: 1.6-3
Depends: libc6 (>= 2.17)
Description: replacement for GNU Pth using system threads
 nPth is a non-preemptive threads implementation using an API very
 similar to the one known from GNU Pth. It has been designed as a
 replacement of GNU Pth for non-ancient operating systems. In
 contrast to GNU Pth it is based on the system's standard threads
 implementation. Thus nPth allows the use of libraries which are not
 compatible to GNU Pth.
Homepage: https://www.gnupg.org/

Package: libnsl-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 345
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libnsl
Version: 1.3.0-2
Replaces: libc6-dev (<< 2.31-4)
Depends: libnsl2 (= 1.3.0-2), libtirpc-dev
Breaks: libc6-dev (<< 2.31-4)
Description: libnsl development files
 This package contains the files needed for developing applications that
 use libnsl.
Homepage: https://github.com/thkukuk/libnsl

Package: libnsl2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 127
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libnsl
Version: 1.3.0-2
Depends: libc6 (>= 2.14), libtirpc3 (>= 1.0.2)
Description: Public client interface for NIS(YP) and NIS+
 This package contains the libnsl library, which contains the public client
 interface for NIS(YP) and NIS+. This code was formerly part of glibc, but is
 now standalone to be able to link against TI-RPC for IPv6 support.
Homepage: https://github.com/thkukuk/libnsl

Package: libnss-myhostname
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 205
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 252.39-1~deb12u2
Depends: libc6 (>= 2.34)
Description: nss module providing fallback resolution for the current hostname
 This package contains a plugin for the Name Service Switch, providing host
 name resolution for the locally configured system hostname as returned by
 gethostname(2). It returns all locally configured public IP addresses or -- if
 none are configured, the IPv4 address 127.0.1.1 (which is on the local
 loopback) and the IPv6 address ::1 (which is the local host).
 .
 A lot of software relies on that the local host name is resolvable. This
 package provides an alternative to the fragile and error-prone manual editing
 of /etc/hosts.
 .
 Installing this package automatically adds myhostname to /etc/nsswitch.conf.
Homepage: https://www.freedesktop.org/wiki/Software/systemd

Package: libnuma1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 71
Maintainer: Ian Wienand <ianw@debian.org>
Architecture: amd64
Multi-Arch: same
Source: numactl
Version: 2.0.16-1
Depends: libc6 (>= 2.34)
Description: Libraries for controlling NUMA policy
 Library to control specific NUMA (Non-Uniform Memory Architecture)
 scheduling or memory placement policies.
Homepage: https://github.com/numactl/numactl

Package: libnvpair3linux
Status: install ok installed
Priority: optional
Section: contrib/libs
Installed-Size: 189
Maintainer: Debian ZFS on Linux maintainers <pkg-zfsonlinux-devel@alioth-lists.debian.net>
Architecture: amd64
Source: zfs-linux
Version: 2.1.11-1+deb12u1
Replaces: libnvpair1, libnvpair3
Depends: libc6 (>= 2.7), libtirpc3 (>= 1.0.2)
Breaks: libnvpair1, libnvpair3
Description: Solaris name-value library for Linux
 This library provides routines for packing and unpacking nv pairs for
 transporting data across process boundaries, transporting between
 kernel and userland, and possibly saving onto disk files.
Homepage: https://zfsonlinux.org/

Package: libogg0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 61
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libogg
Version: 1.3.5-3
Depends: libc6 (>= 2.14)
Description: Ogg bitstream library
 Libogg is a library for manipulating ogg bitstreams.  It handles
 both making ogg bitstreams and getting packets from ogg bitstreams.
Homepage: https://xiph.org/ogg/

Package: libonig5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 666
Maintainer: Jörg Frings-Fürst <debian@jff.email>
Architecture: amd64
Multi-Arch: same
Source: libonig
Version: 6.9.8-1
Depends: libc6 (>= 2.14)
Description: regular expressions library
 Oniguruma is a library for working with regular expressions.
 .
 Different character encoding for every regular expression object can
 be specified.
Homepage: https://github.com/kkos/oniguruma

Package: libopenal-data
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 207
Maintainer: Debian Games Team <pkg-games-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: openal-soft
Version: 1:1.19.1-2
Replaces: libopenal1 (<< 1:1.14-5)
Breaks: libopenal1 (<< 1:1.14-5)
Conffiles:
 /etc/openal/alsoft.conf d1bc9fa6aeada2951603d417e2993afe
Description: Software implementation of the OpenAL audio API (data files)
 OpenAL, the Open Audio Library, is a joint effort to create an open,
 vendor-neutral, cross-platform API for interactive, primarily spatialized
 audio. OpenAL's primary audience are application developers and desktop
 users that rely on portable standards like OpenGL, for games and other
 multimedia applications.
 .
 This package installs data files used by the OpenAL Soft shared library.
Homepage: http://kcat.strangesoft.net/openal.html

Package: libopenal1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 963
Maintainer: Debian Games Team <pkg-games-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: openal-soft
Version: 1:1.19.1-2
Depends: libopenal-data (= 1:1.19.1-2), libc6 (>= 2.27), libsndio7.0 (>= 1.1.0)
Recommends: libasound2 (>= 1.0.16), libpulse0 (>= 0.99.1)
Suggests: libportaudio2 (>= 19+svn20101113)
Description: Software implementation of the OpenAL audio API (shared library)
 OpenAL, the Open Audio Library, is a joint effort to create an open,
 vendor-neutral, cross-platform API for interactive, primarily spatialized
 audio. OpenAL's primary audience are application developers and desktop
 users that rely on portable standards like OpenGL, for games and other
 multimedia applications.
 .
 This library is meant as a compatible update/replacement to the OpenAL Sample
 Implementation (the SI). The SI has been unmaintained for quite a while, and
 would require a lot of work to clean up. This is a fork the old Windows version
 to attempt an accelerated ALSA version of an OpenAL implementation.
 .
 OpenAL Soft supports mono, stereo, 4-channel, 5.1, 6.1, and 7.1 output, as
 opposed to the SI's 4-channel max (though it did have some provisions for 6
 channel, this was not 5.1, and was seemingly a "late" addition). OpenAL Soft
 does not support the Vorbis and MP3 extensions, however those were considered
 deprecated even in the SI. It does, though, support some of the newer
 extensions like AL_EXT_FLOAT32 and AL_EXT_MCFORMATS for multi-channel and
 floating-point formats, as well as ALC_EXT_EFX for environmental audio effects,
 and others.
 .
 This package installs the OpenAL Soft shared library.
Homepage: http://kcat.strangesoft.net/openal.html

Package: libopenexr-3-1-30
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 4488
Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: openexr
Version: 3.1.5-5
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libimath-3-1-29 (>= 3.1.6), libstdc++6 (>= 11), zlib1g (>= 1:1.2.0)
Description: runtime files for the OpenEXR image library
 OpenEXR is a high dynamic-range (HDR) image file format developed by
 Industrial Light & Magic for use in computer imaging applications.
 .
 OpenEXR's features include:
    * Higher dynamic range and colour precision than existing 8- and
      10-bit image file formats.
    * Support for the "half" 16-bit floating-point pixel format.
    * Multiple lossless image compression algorithms. Some of the
      included codecs can achieve 2:1 lossless compression ratios on
      images with film grain.
    * Extensibility. New compression codecs and image types can easily
      be added by extending the C++ classes included in the OpenEXR
      software distribution. New image attributes (strings, vectors,
      integers, etc.) can be added to OpenEXR image headers without
      affecting backward compatibility with existing OpenEXR
      applications.
 .
 This package contains the following shared library:
    * IlmImf - a library that reads and writes OpenEXR images.
Homepage: https://www.openexr.com

Package: libopenjp2-7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 479
Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: openjpeg2
Version: 2.5.0-2+deb12u3
Depends: libc6 (>= 2.34)
Description: JPEG 2000 image compression/decompression library
 OpenJPEG is a library for handling the JPEG 2000 image compression format.
 JPEG 2000 is a wavelet-based image compression standard and permits progressive
 transmission by pixel and resolution accuracy for progressive downloads of an
 encoded image. It supports lossless and lossy compression, supports higher
 compression than JPEG 1991, and has resilience to errors in the image.
 .
 This package contains the runtime files for openjpeg 2.x
Homepage: https://www.openjpeg.org

Package: libopenjp2-7-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 977
Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: openjpeg2
Version: 2.5.0-2+deb12u3
Depends: libopenjp2-7 (= 2.5.0-2+deb12u3)
Description: development files for OpenJPEG, a JPEG 2000 image library
 OpenJPEG is a library for handling the JPEG 2000 image compression format.
 JPEG 2000 is a wavelet-based image compression standard and permits progressive
 transmission by pixel and resolution accuracy for progressive downloads of an
 encoded image. It supports lossless and lossy compression, supports higher
 compression than JPEG 1991, and has resilience to errors in the image.
 .
 This package contains the development files for openjpeg 2.x
Homepage: https://www.openjpeg.org

Package: libopenmpt0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1951
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libopenmpt
Version: 0.6.9-1
Depends: libc6 (>= 2.32), libgcc-s1 (>= 4.0), libmpg123-0 (>= 1.28.0), libstdc++6 (>= 11), libvorbis0a (>= 1.1.2), libvorbisfile3 (>= 1.1.2), zlib1g (>= 1:1.1.4)
Description: module music library based on OpenMPT -- shared library
 libopenmpt is a cross-platform C++ and C library to decode tracked music
 files (modules) into a raw PCM audio stream. It is based on the player code
 of the OpenMPT project, a descendant of the original ModPlug Tracker.
 .
 This package contains the main shared library.
Homepage: https://lib.openmpt.org/libopenmpt/

Package: libopus0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 400
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: opus
Version: 1.3.1-3
Depends: libc6 (>= 2.29)
Suggests: opus-tools
Description: Opus codec runtime library
 The Opus codec is designed for interactive speech and audio transmission over
 the Internet. It is designed by the IETF Codec Working Group and incorporates
 technology from Skype's SILK codec and Xiph.Org's CELT codec.
 .
 It is intended to suit a wide range of interactive audio applications,
 including Voice over IP, videoconferencing, in-game chat, and even remote live
 music performances.  It can scale from low bit-rate narrowband speech to very
 high quality stereo music. The current features are:
 .
  Bit-rates from 6 kb/s 510 kb/s
  Sampling rates from 8 to 48 kHz
  Frame sizes from 2.5 ms to 60 ms
  Support for both constant bit-rate (CBR) and variable bit-rate (VBR)
  Audio bandwidth from narrowband to full-band
  Support for speech and music
  Support for mono and stereo
  Support for up to 255 channels (multistream frames)
  Dynamically adjustable bitrate, audio bandwidth, and frame size
  Good loss robustness and packet loss concealment (PLC)
  Floating point and fixed-point implementation
 .
 This package provides the Opus runtime library.
Homepage: http://www.opus-codec.org

Package: libp11-kit0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1408
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: p11-kit
Version: 0.24.1-2
Depends: libc6 (>= 2.34), libffi8 (>= 3.4)
Description: library for loading and coordinating access to PKCS#11 modules - runtime
 The p11-kit library provides a way to load and enumerate Public-Key
 Cryptography Standard #11 modules, along with a standard configuration
 setup for installing PKCS#11 modules so that they're discoverable. It
 also solves problems with coordinating the use of PKCS#11 by different
 components or libraries living in the same process.
 .
 This package contains the shared library required for applications loading
 and accessing PKCS#11 modules.
Homepage: https://p11-glue.github.io/p11-glue/p11-kit.html

Package: libpam-modules
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1031
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: amd64
Multi-Arch: same
Source: pam
Version: 1.5.2-6+deb12u2
Replaces: libpam-umask, libpam0g-util
Provides: libpam-mkhomedir, libpam-motd, libpam-umask
Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.34), libcrypt1 (>= 1:4.3.0), libdb5.3, libpam0g (>= 1.4.1), libselinux1 (>= 3.1~), debconf (>= 0.5) | debconf-2.0, libpam-modules-bin (= 1.5.2-6+deb12u2)
Conflicts: libpam-mkhomedir, libpam-motd, libpam-umask
Conffiles:
 /etc/security/access.conf dc21d0fd769d655b311d785670e5c6ae
 /etc/security/faillock.conf 164da8ffb87f3074179bc60b71d0b99f
 /etc/security/group.conf f1e26e8db6f7abd2d697d7dad3422c36
 /etc/security/limits.conf 0b1967ff9042a716ce6b01cb999aa1f5
 /etc/security/namespace.conf 6b3796403421d66db7defc46517711bc
 /etc/security/namespace.init d9e6a7c85e966427ef23a04ec6c7000f
 /etc/security/pam_env.conf 89cc8702173d5cd51abc152ae9f8d6bc
 /etc/security/sepermit.conf 3d82df292d497bbeaaf8ebef18cd14f1
 /etc/security/time.conf 06e05c6079e839c8833ac7c3abfde192
Description: Pluggable Authentication Modules for PAM
 This package completes the set of modules for PAM. It includes the
  pam_unix.so module as well as some specialty modules.
Homepage: http://www.linux-pam.org/

Package: libpam-modules-bin
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 227
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: pam
Version: 1.5.2-6+deb12u2
Replaces: libpam-modules (<< 1.5.2-5~)
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.34), libcrypt1 (>= 1:4.3.0), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~)
Description: Pluggable Authentication Modules for PAM - helper binaries
 This package contains helper binaries used by the standard set of PAM
 modules in the libpam-modules package.
Homepage: http://www.linux-pam.org/

Package: libpam-runtime
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 876
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: all
Multi-Arch: foreign
Source: pam
Version: 1.5.2-6+deb12u2
Replaces: libpam0g-dev, libpam0g-util
Depends: debconf (>= 0.5) | debconf-2.0, debconf (>= 1.5.19) | cdebconf, libpam-modules (>= 1.0.1-6)
Conflicts: libpam0g-util
Conffiles:
 /etc/pam.conf 87fc76f18e98ee7d3848f6b81b3391e5
 /etc/pam.d/other 31aa7f2181889ffb00b87df4126d1701
Description: Runtime support for the PAM library
 Contains configuration files and  directories required for
 authentication  to work on Debian systems.  This package is required
 on almost all installations.
Homepage: http://www.linux-pam.org/

Package: libpam-systemd
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 532
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 252.39-1~deb12u2
Provides: default-logind (= 252.39-1~deb12u2), logind (= 252.39-1~deb12u2)
Depends: libc6 (>= 2.34), libcap2 (>= 1:2.10), libpam0g (>= 0.99.7.1), systemd (= 252.39-1~deb12u2), libpam-runtime, default-dbus-system-bus | dbus-system-bus, systemd-sysv
Recommends: dbus-user-session
Description: system and service manager - PAM module
 This package contains the PAM module which registers user sessions in
 the systemd control group hierarchy for logind.
 .
 If in doubt, do install this package.
 .
 Packages that depend on logind functionality need to depend on libpam-systemd.
Homepage: https://www.freedesktop.org/wiki/Software/systemd

Package: libpam0g
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 215
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: amd64
Multi-Arch: same
Source: pam
Version: 1.5.2-6+deb12u2
Replaces: libpam0g-util
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.34), debconf (>= 0.5) | debconf-2.0
Suggests: libpam-doc
Description: Pluggable Authentication Modules library
 Contains the shared library for Linux-PAM, a library that enables the
 local system administrator to choose how applications authenticate users.
 In other words, without rewriting or recompiling a PAM-aware application,
 it is possible to switch between the authentication mechanism(s) it uses.
 One may entirely upgrade the local authentication system without touching
 the applications themselves.
Homepage: http://www.linux-pam.org/

Package: libpango-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 520
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: pango1.0
Version: 1.50.12+ds-1
Depends: fontconfig (>= 2.13.0), libc6 (>= 2.14), libfribidi0 (>= 1.0.6), libglib2.0-0 (>= 2.67.3), libharfbuzz0b (>= 5.1.0), libthai0 (>= 0.1.25)
Breaks: libpangocairo-1.0-0 (<< 1.44.7), libpangoft2-1.0-0 (<< 1.44.7), libpangoxft-1.0-0 (<< 1.44.7)
Description: Layout and rendering of internationalized text
 Pango is a library for layout and rendering of text, with an emphasis
 on internationalization. Pango can be used anywhere that text layout is
 needed. however, most of the work on Pango-1.0 was done using the GTK+
 widget toolkit as a test platform. Pango forms the core of text and
 font handling for GTK+-2.0.
 .
 Pango is designed to be modular; the core Pango layout can be used with
 four different font backends:
  - Core X windowing system fonts
  - Client-side fonts on X using the Xft library
  - Direct rendering of scalable fonts using the FreeType library
  - Native fonts on Microsoft backends
 .
 This package contains the shared libraries.
Homepage: https://www.pango.org/

Package: libpangocairo-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 103
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: pango1.0
Version: 1.50.12+ds-1
Depends: libc6 (>= 2.4), libcairo2 (>= 1.12.10), libfontconfig1 (>= 2.13.0), libglib2.0-0 (>= 2.62.0), libharfbuzz0b (>= 2.6.0), libpango-1.0-0 (= 1.50.12+ds-1), libpangoft2-1.0-0 (= 1.50.12+ds-1)
Description: Layout and rendering of internationalized text
 Pango is a library for layout and rendering of text, with an emphasis
 on internationalization. Pango can be used anywhere that text layout is
 needed. however, most of the work on Pango-1.0 was done using the GTK+
 widget toolkit as a test platform. Pango forms the core of text and
 font handling for GTK+-2.0.
 .
 Pango is designed to be modular; the core Pango layout can be used with
 four different font backends:
  - Core X windowing system fonts
  - Client-side fonts on X using the Xft library
  - Direct rendering of scalable fonts using the FreeType library
  - Native fonts on Microsoft backends
 .
 This package contains the shared libraries.
Homepage: https://www.pango.org/

Package: libpangoft2-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 142
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: pango1.0
Version: 1.50.12+ds-1
Depends: libc6 (>= 2.14), libfontconfig1 (>= 2.13.0), libfreetype6 (>= 2.2.1), libglib2.0-0 (>= 2.67.3), libharfbuzz0b (>= 5.1.0), libpango-1.0-0 (= 1.50.12+ds-1)
Description: Layout and rendering of internationalized text
 Pango is a library for layout and rendering of text, with an emphasis
 on internationalization. Pango can be used anywhere that text layout is
 needed. however, most of the work on Pango-1.0 was done using the GTK+
 widget toolkit as a test platform. Pango forms the core of text and
 font handling for GTK+-2.0.
 .
 Pango is designed to be modular; the core Pango layout can be used with
 four different font backends:
  - Core X windowing system fonts
  - Client-side fonts on X using the Xft library
  - Direct rendering of scalable fonts using the FreeType library
  - Native fonts on Microsoft backends
 .
 This package contains the shared libraries.
Homepage: https://www.pango.org/

Package: libpaper-utils
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 35
Maintainer: Giuseppe Sacco <eppesuig@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: libpaper
Version: 1.1.29
Replaces: libpaper1 (<< 1.1.10), libpaperg (<< 1.1.9)
Depends: libc6 (>= 2.34), libpaper1
Description: library for handling paper characteristics (utilities)
 The libpaper paper-handling library automates recognition of many
 different paper types and sizes for programs that need to deal with
 printed output.
 .
 This package contains utilities for setting the system's default
 paper type and for accessing paper type information from shell
 scripts.

Package: libpaper1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 56
Maintainer: Giuseppe Sacco <eppesuig@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libpaper
Version: 1.1.29
Replaces: libpaperg (<< 1.1.9)
Provides: libpaperg
Depends: libc6 (>= 2.33), debconf (>= 0.5) | debconf-2.0, ucf (>= 0.28), dpkg (>= 1.17.2)
Recommends: libpaper-utils
Description: library for handling paper characteristics
 The libpaper paper-handling library automates recognition of many
 different paper types and sizes for programs that need to deal with
 printed output.

Package: libparted2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 524
Maintainer: Parted Maintainer Team <parted-maintainers@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: same
Source: parted
Version: 3.5-3
Provides: libparted
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.34), libdevmapper1.02.1 (>= 2:1.02.97), libuuid1 (>= 2.16), dmidecode
Suggests: parted, libparted-dev, libparted-i18n (= 3.5-3)
Description: disk partition manipulator - shared library
 GNU Parted is a program that allows you to create, destroy, resize,
 move, and copy disk partitions. This is useful for creating space
 for new operating systems, reorganizing disk usage, and copying data
 to new hard disks.
 .
 This package contains the shared library.
Homepage: https://www.gnu.org/software/parted

Package: libpcap0.8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 368
Maintainer: Romain Francoise <rfrancoise@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libpcap
Version: 1.10.3-1
Depends: libc6 (>= 2.33), libdbus-1-3 (>= 1.9.14)
Description: system interface for user-level packet capture
 libpcap (Packet CAPture) provides a portable framework for low-level
 network monitoring.  Applications include network statistics collection,
 security monitoring, network debugging, etc.
 .
 Since almost every system vendor provides a different interface for
 packet capture, and since there are several tools that require this
 functionality, the libpcap authors created this system-independent API
 to ease in porting and to alleviate the need for several
 system-dependent packet capture modules in each application.
Homepage: https://www.tcpdump.org/

Package: libpci3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 124
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: amd64
Multi-Arch: same
Source: pciutils
Version: 1:3.9.0-4
Depends: libc6 (>= 2.34), libudev1 (>= 196), zlib1g (>= 1:1.1.4), pci.ids (>= 0.0~2019.11.10-2)
Description: PCI utilities (shared library)
 This package contains the libpci shared library files.
 .
 The libpci library provides portable access to configuration
 registers of devices connected to the PCI bus.
Homepage: https://mj.ucw.cz/sw/pciutils/

Package: libpciaccess0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 92
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libpciaccess
Version: 0.17-2
Depends: libc6 (>= 2.33), zlib1g (>= 1:1.1.4)
Suggests: pciutils
Description: Generic PCI access library for X
 Provides functionality for X to access the PCI bus and devices
 in a platform-independent way.

Package: libpcre2-8-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 685
Maintainer: Matthew Vernon <matthew@debian.org>
Architecture: amd64
Multi-Arch: same
Source: pcre2
Version: 10.42-1+deb12u1
Depends: libc6 (>= 2.34)
Description: New Perl Compatible Regular Expression Library- 8 bit runtime files
 This is PCRE2, the new implementation of PCRE, a library of functions
 to support regular expressions whose syntax and semantics are as
 close as possible to those of the Perl 5 language. New projects
 should use this library in preference to the older library,
 confusingly called pcre3 in Debian.
 .
 This package contains the 8 bit runtime library, which operates on
 ASCII and UTF-8 input.
Homepage: https://pcre.org/

Package: libpcre3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 680
Maintainer: Matthew Vernon <matthew@debian.org>
Architecture: amd64
Multi-Arch: same
Source: pcre3
Version: 2:8.39-15
Depends: libc6 (>= 2.34)
Breaks: approx (<< 4.4-1~), cduce (<< 0.5.3-2~), cmigrep (<< 1.5-7~), galax (<< 1.1-7~), libpcre-ocaml (<< 6.0.1~), liquidsoap (<< 0.9.2-3~), ocsigen (<< 1.3.3-1~)
Conflicts: libpcre3-dev (<= 4.3-3)
Description: Old Perl 5 Compatible Regular Expression Library - runtime files
 This is a library of functions to support regular expressions whose syntax
 and semantics are as close as possible to those of the Perl 5 language.
 .
 New packages should use the newer pcre2 packages, and existing
 packages should migrate to pcre2.
 .
 This package contains the runtime libraries.

Package: libperl5.36
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 28864
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: amd64
Multi-Arch: same
Source: perl
Version: 5.36.0-7+deb12u3
Replaces: libarchive-tar-perl (<= 1.38-2), libcompress-raw-bzip2-perl (<< 2.103), libcompress-raw-zlib-perl (<< 2.105), libcompress-zlib-perl (<< 2.106), libdigest-md5-perl (<< 2.58), libdigest-sha-perl (<< 6.02), libencode-perl (<< 3.17), libio-compress-base-perl (<< 2.106), libio-compress-bzip2-perl (<< 2.106), libio-compress-perl (<< 2.106), libio-compress-zlib-perl (<< 2.106), libmime-base64-perl (<< 3.16), libmodule-corelist-perl (<< 2.14-2), libstorable-perl (<< 3.26), libsys-syslog-perl (<< 0.36), libthreads-perl (<< 2.27), libthreads-shared-perl (<< 1.64), libtime-hires-perl (<< 1.9770), libtime-piece-perl (<< 1.3401), perl (<< 5.22.0~), perl-base (<< 5.22.0~)
Depends: libbz2-1.0, libc6 (>= 2.35), libcrypt1 (>= 1:4.1.0), libdb5.3, libgdbm-compat4 (>= 1.18-3), libgdbm6 (>= 1.21), zlib1g (>= 1:1.2.2.3), perl-modules-5.36 (>= 5.36.0-7+deb12u3)
Suggests: sensible-utils
Breaks: libcompress-raw-bzip2-perl (<< 2.103), libcompress-raw-zlib-perl (<< 2.105), libcompress-zlib-perl (<< 2.106), libdigest-md5-perl (<< 2.58), libdigest-sha-perl (<< 6.02), libencode-perl (<< 3.17), libfilter-perl (<< 1.60), libio-compress-base-perl (<< 2.106), libio-compress-bzip2-perl (<< 2.106), libio-compress-perl (<< 2.106), libio-compress-zlib-perl (<< 2.106), libmime-base64-perl (<< 3.16), libstorable-perl (<< 3.26), libsys-syslog-perl (<< 0.36), libthreads-perl (<< 2.27), libthreads-shared-perl (<< 1.64), libtime-hires-perl (<< 1.9770), libtime-piece-perl (<< 1.3401)
Description: shared Perl library
 This package contains the shared Perl library, used by applications
 which embed a Perl interpreter.
 .
 It also contains the architecture-dependent parts of the standard
 library (and depends on perl-modules-5.36 which contains the
 architecture-independent parts).
Homepage: http://dev.perl.org/perl5/

Package: libpgm-5.3-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 322
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libpgm
Version: 5.3.128~dfsg-2
Depends: libc6 (>= 2.29)
Description: OpenPGM shared library
 OpenPGM is an open source implementation of the Pragmatic General Multicast
 (PGM) specification in RFC 3208 available at www.ietf.org. PGM is a reliable
 and scalable multicast protocol that enables receivers to detect loss,
 request retransmission of lost data, or notify an application of
 unrecoverable loss. PGM is a receiver-reliable protocol, which means the
 receiver is responsible for ensuring all data is received, absolving the
 sender of reception responsibility. PGM runs over a best effort datagram
 service, currently OpenPGM uses IP multicast but could be implemented above
 switched fabrics such as InfiniBand.
 .
 This is the runtime package for programs that use the OpenPGM library.
Homepage: https://github.com/steve-o/openpgm

Package: libpipeline1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 96
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libpipeline
Version: 1.5.7-1
Depends: libc6 (>= 2.34)
Description: Unix process pipeline manipulation library
 This is a C library for setting up and running pipelines of processes,
 without needing to involve shell command-line parsing which is often
 error-prone and insecure.
Homepage: https://libpipeline.gitlab.io/libpipeline/

Package: libpixman-1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1002
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: pixman
Version: 0.42.2-1
Depends: libc6 (>= 2.29)
Description: pixel-manipulation library for X and cairo
 A library for manipulating pixel regions -- a set of Y-X banded
 rectangles, image compositing using the Porter/Duff model
 and implicit mask generation for geometric primitives including
 trapezoids, triangles, and rectangles.
Homepage: http://pixman.org/

Package: libpkgconf3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 101
Maintainer: Andrej Shadura <andrewsh@debian.org>
Architecture: amd64
Multi-Arch: same
Source: pkgconf
Version: 1.8.1-1
Depends: libc6 (>= 2.33)
Description: shared library for pkgconf
 pkgconf is an implementation of the pkg-config system, which helps to configure
 compiler and linker flags for development frameworks.
 .
 pkgconf is a replacement for pkg-config, providing additional functionality
 while also maintaining compatibility.
 .
 libpkgconf is a library which provides access to most of pkgconf's
 functionality, to allow other tooling such as compilers and IDEs to
 discover and use libraries configured by pkgconf.
 .
 This package ships a shared library for libpkgconf.
Homepage: http://pkgconf.org/

Package: libplacebo208
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 7716
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libplacebo
Version: 4.208.0-3
Depends: libc6 (>= 2.34), libepoxy0 (>= 1.4.3), libgcc-s1 (>= 3.4), liblcms2-2 (>= 2.6), libstdc++6 (>= 11), libvulkan1 (>= 1.2.131.2)
Description: GPU-accelerated video/image rendering primitives (shared library)
 The library provides useful GPU-accelerated image processing primitives based
 on GLSL. It includes shader routines for decoding and transforming colors,
 tone mapping, dithering, and for various algorithms that sample from images,
 such as debanding and scaling.
 .
 This package contains the shared library.
Homepage: https://code.videolan.org/videolan/libplacebo

Package: libpng-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 853
Maintainer: Maintainers of libpng1.6 packages <libpng1.6@packages.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libpng1.6
Version: 1.6.39-2+deb12u5
Replaces: libpng16-dev (<< 1.6.20-3), libpng16-devtools (<< 1.6.21-1)
Depends: libpng16-16 (= 1.6.39-2+deb12u5), zlib1g-dev
Recommends: libpng-tools
Breaks: libpng16-dev (<< 1.6.20-3), libpng16-devtools (<< 1.6.21-1)
Conflicts: libpng12-0-dev, libpng12-dev, libpng2-dev, libpng3-dev
Description: PNG library - development (version 1.6)
 libpng is a library implementing an interface for reading and writing
 PNG (Portable Network Graphics) format files.
 .
 This package contains the header and development files needed to build
 programs and packages using libpng.
Homepage: http://libpng.org/pub/png/libpng.html

Package: libpng-tools
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 192
Maintainer: Maintainers of libpng1.6 packages <libpng1.6@packages.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: libpng1.6
Version: 1.6.39-2+deb12u5
Replaces: libpng16-tools (<< 1.6.21-1)
Depends: libc6 (>= 2.34), libpng16-16 (= 1.6.39-2+deb12u5), zlib1g (>= 1:1.2.3.4)
Breaks: libpng16-tools (<< 1.6.21-1)
Description: PNG library - tools (version 1.6)
 libpng is a library implementing an interface for reading and writing
 PNG (Portable Network Graphics) format files.
 .
 This package contains a program to interact with libpng from the
 command line.
Homepage: http://libpng.org/pub/png/libpng.html

Package: libpng16-16
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 417
Maintainer: Maintainers of libpng1.6 packages <libpng1.6@packages.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libpng1.6
Version: 1.6.39-2+deb12u5
Depends: libc6 (>= 2.29), zlib1g (>= 1:1.2.11.dfsg)
Description: PNG library - runtime (version 1.6)
 libpng is a library implementing an interface for reading and writing
 PNG (Portable Network Graphics) format files.
 .
 This package contains the runtime library files needed to run software
 using libpng.
Homepage: http://libpng.org/pub/png/libpng.html

Package: libpocketsphinx3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 314
Maintainer: Debian Accessibility Team <pkg-a11y-devel@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: same
Source: pocketsphinx
Version: 0.8+5prealpha+1-15
Depends: libc6 (>= 2.29), libsphinxbase3 (>= 0.8+5prealpha+1)
Recommends: pocketsphinx-en-us
Description: Speech recognition tool - front-end library
 CMU Sphinx is a large vocabulary, speaker-independent continuous speech
 recognition engine.
 .
 This package contains the frontend shared library
Homepage: http://cmusphinx.sourceforge.net/

Package: libpolkit-agent-1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 70
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: policykit-1
Version: 122-3
Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.37.3), libpolkit-gobject-1-0 (= 122-3)
Description: polkit Authentication Agent API
 polkit is a toolkit for defining and handling the policy that
 allows unprivileged processes to speak to privileged processes.
 It was previously named PolicyKit.
 .
 This package contains a library for accessing the authentication agent.
Homepage: https://www.freedesktop.org/wiki/Software/polkit/

Package: libpolkit-gobject-1-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 148
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: policykit-1
Version: 122-3
Depends: libc6 (>= 2.7), libglib2.0-0 (>= 2.37.3), libsystemd0 (>= 213)
Description: polkit Authorization API
 polkit is a toolkit for defining and handling the policy that
 allows unprivileged processes to speak to privileged processes.
 It was previously named PolicyKit.
 .
 This package contains a library for accessing polkit.
Homepage: https://www.freedesktop.org/wiki/Software/polkit/

Package: libpopt0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 245
Maintainer: Håvard F. Aasen <havard.f.aasen@pfft.no>
Architecture: amd64
Multi-Arch: same
Source: popt
Version: 1.19+dfsg-1
Depends: libc6 (>= 2.33)
Description: lib for parsing cmdline parameters
 Popt was heavily influenced by the getopt() and getopt_long() functions,
 but it allows more powerful argument expansion. It can parse arbitrary
 argv[] style arrays and automatically set variables based on command
 line arguments. It also allows command line arguments to be aliased via
 configuration files and includes utility functions for parsing arbitrary
 strings into argv[] arrays using shell-like rules.
 .
 This package contains the runtime library and locale data.
Homepage: https://github.com/rpm-software-management/popt

Package: libpostproc56
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 239
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ffmpeg
Version: 7:5.1.9-0+deb12u1
Depends: libavutil57 (>= 7:5.0), libc6 (>= 2.14)
Description: FFmpeg library for post processing - runtime files
 FFmpeg is the leading multimedia framework, able to decode, encode, transcode,
 mux, demux, stream, filter and play pretty much anything that humans and
 machines have created. It supports the most obscure ancient formats up to the
 cutting edge.
 .
 This library provides video post processing.
 .
 This package contains the runtime files.
Homepage: https://ffmpeg.org/

Package: libproc2-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 232
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: same
Source: procps
Version: 2:4.0.2-3
Replaces: procps (<< 1:3.3.2-1)
Depends: libc6 (>= 2.34), libsystemd0 (>= 209)
Description: library for accessing process information from /proc
 The libproc2 library is a way of accessing information out of the /proc
 filesystem.
 .
 This package contains the shared libraries necessary to run programs
 compiled with libproc2.
Homepage: https://gitlab.com/procps-ng/procps

Package: libprotobuf-c1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 69
Maintainer: Robert Edmonds <edmonds@debian.org>
Architecture: amd64
Multi-Arch: same
Source: protobuf-c (1.4.1-1)
Version: 1.4.1-1+b1
Depends: libc6 (>= 2.14)
Description: Protocol Buffers C shared library (protobuf-c)
 Protocol Buffers are a flexible, efficient, automated mechanism for
 serializing structured data - similar to XML, but smaller, faster, and
 simpler. You define how you want your data to be structured once, then you can
 use special generated source code to easily write and read your structured
 data to and from a variety of data streams and using a variety of languages.
 You can even update your data structure without breaking deployed programs
 that are compiled against the "old" format.
 .
 This is the "protobuf-c" implementation of Protocol Buffers in C.
 .
 This package contains the shared library.
Homepage: https://github.com/protobuf-c/protobuf-c

Package: libpsl5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 96
Maintainer: Tim Rühsen <tim.ruehsen@gmx.de>
Architecture: amd64
Multi-Arch: same
Source: libpsl
Version: 0.21.2-1
Depends: libidn2-0 (>= 0.16), libc6 (>= 2.33), libunistring2 (>= 0.9.7)
Recommends: publicsuffix (>= 20150507)
Description: Library for Public Suffix List (shared libraries)
 Libpsl allows checking domains against the Public Suffix List.
 It can be used to avoid privacy-leaking 'super-cookies',
 'super domain' certificates, for domain highlighting purposes
 sorting domain lists by site and more.
 .
 Please see https://publicsuffix.org for more detailed information.
 .
 This package contains runtime libraries.
Homepage: https://github.com/rockdaboot/libpsl

Package: libpthread-stubs0-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 18
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libpthread-stubs
Version: 0.4-1
Description: pthread stubs not provided by native libc, development files
 This library provides weak aliases for pthread functions not provided
 in libc or otherwise available by default.  Libraries like libxcb rely
 on pthread stubs to use pthreads optionally, becoming thread-safe when
 linked to libpthread, while avoiding any performance hit when running
 single-threaded. libpthread-stubs supports this behavior even on
 platforms which do not supply all the necessary pthread stubs.
 .
 On platforms which already supply all the necessary pthread stubs, this
 package ships only the pkg-config file pthread-stubs.pc, to allow
 libraries to unconditionally express a dependency on pthread-stubs and
 still obtain correct behavior.

Package: libpulse0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 969
Maintainer: Pulseaudio maintenance team <pkg-pulseaudio-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: pulseaudio (16.1+dfsg1-2)
Version: 16.1+dfsg1-2+b1
Depends: libasyncns0 (>= 0.3), libc6 (>= 2.34), libdbus-1-3 (>= 1.9.14), libsndfile1 (>= 1.0.20), libsystemd0, libx11-6, libx11-xcb1 (>= 2:1.8.1), libxcb1
Suggests: pulseaudio
Conffiles:
 /etc/pulse/client.conf 16bb1fd7704eae3f0e7dde080b83e197
Description: PulseAudio client libraries
 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 Client libraries used by applications that access a PulseAudio sound server
 via PulseAudio's native interface.
Homepage: https://www.pulseaudio.org

Package: libpython3-stdlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 27
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: python3-defaults (3.11.2-1)
Version: 3.11.2-1+b1
Depends: libpython3.11-stdlib (>= 3.11.2-1~)
Description: interactive high-level object-oriented language (default python3 version)
 This package contains the majority of the standard library for the Python
 language (default python3 version).
 .
 This package is a dependency package, which depends on Debian's default
 Python 3 version's standard library (currently v3.11).
Homepage: https://www.python.org/

Package: libpython3.11-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 5214
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: python3.11
Version: 3.11.2-6+deb12u8
Depends: libc6 (>= 2.14), libssl3 (>= 3.0.0)
Recommends: libpython3.11-stdlib
Conflicts: binfmt-support (<< 1.1.2)
Conffiles:
 /etc/python3.11/sitecustomize.py d6b276695157bde06a56ba1b2bc53670
Description: Minimal subset of the Python language (version 3.11)
 This package contains some essential modules. It is normally not
 used on it's own, but as a dependency of python3.11-minimal.

Package: libpython3.11-stdlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 8330
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: python3.11
Version: 3.11.2-6+deb12u8
Replaces: python3-gdbm (<< 3.9.9-1~)
Depends: libpython3.11-minimal (= 3.11.2-6+deb12u8), media-types | mime-support, libbz2-1.0, libc6 (>= 2.34), libcrypt1 (>= 1:4.1.0), libdb5.3, libffi8 (>= 3.4), liblzma5 (>= 5.1.1alpha+20120614), libncursesw6 (>= 6.1), libnsl2 (>= 1.0), libreadline8 (>= 7.0~beta), libsqlite3-0 (>= 3.36.0), libtinfo6 (>= 6), libtirpc3 (>= 1.0.2), libuuid1 (>= 2.20.1)
Breaks: python3-gdbm (<< 3.9.9-1~)
Description: Interactive high-level object-oriented language (standard library, version 3.11)
 Python is a high-level, interactive, object-oriented language. Its 3.11 version
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
 .
 This package contains Python 3.11's standard library. It is normally not
 used on its own, but as a dependency of python3.11.

Package: libquadmath0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 292
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.2.0-14+deb12u1
Depends: gcc-12-base (= 12.2.0-14+deb12u1), libc6 (>= 2.23)
Description: GCC Quad-Precision Math Library
 A library, which provides quad-precision mathematical functions on targets
 supporting the __float128 datatype. The library is used to provide on such
 targets the REAL(16) type in the GNU Fortran compiler.
Homepage: http://gcc.gnu.org/

Package: librabbitmq4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 124
Maintainer: Florian Ernst <florian@debian.org>
Architecture: amd64
Multi-Arch: same
Source: librabbitmq
Version: 0.11.0-1+deb12u3
Depends: libc6 (>= 2.17), libssl3 (>= 3.0.0)
Description: AMQP client library written in C
 RabbitMQ provides robust messaging for applications. It is easy to use, fit
 for purpose at cloud scale and supported on all major operating systems and
 developer platforms. librabbitmq is a C-language AMQP client library for use
 with AMQP servers such as RabbitMQ speaking protocol versions 0-9-1.
 .
 This package includes the library itself.
Homepage: https://github.com/alanxz/rabbitmq-c

Package: librav1e0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2664
Maintainer: Debian Rust Maintainers <pkg-rust-maintainers@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: same
Source: rust-rav1e
Version: 0.5.1-6
Depends: libc6 (>= 2.34), libgcc-s1 (>= 4.2)
Description: Fastest and safest AV1 encoder - shared library
 rav1e is a encoder for the AV1 video codec.
 .
 This package contains the shared library.
Homepage: https://github.com/xiph/rav1e

Package: libraw-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 3384
Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libraw
Version: 0.20.2-2.1+deb12u2
Depends: libraw20 (= 0.20.2-2.1+deb12u2), liblcms2-dev
Description: raw image decoder library (development files)
 LibRaw is a library for reading RAW files obtained from digital photo cameras
 (CRW/CR2, NEF, RAF, DNG, and others).
 .
 This package contains the static library and header files.
Homepage: https://www.libraw.org

Package: libraw1394-11
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 100
Maintainer: Guus Sliepen <guus@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libraw1394
Version: 2.1.2-2
Depends: libc6 (>= 2.14)
Suggests: libraw1394-doc
Description: library for direct access to IEEE 1394 bus (aka FireWire)
 libraw1394 is the only supported interface to the kernel side raw1394
 of the Linux IEEE-1394 subsystem, which provides direct access to the
 connected 1394 buses to user space.  Through libraw1394/raw1394,
 applications can directly send to and receive from other nodes without
 requiring a kernel driver for the protocol in question.
Homepage: https://ieee1394.wiki.kernel.org/

Package: libraw20
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2278
Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libraw
Version: 0.20.2-2.1+deb12u2
Depends: libc6 (>= 2.33), libgcc-s1 (>= 3.0), libgomp1 (>= 6), libjpeg62-turbo (>= 1.3.1), liblcms2-2 (>= 2.2+git20110628), libstdc++6 (>= 5.2)
Description: raw image decoder library
 LibRaw is a library for reading RAW files obtained from digital photo cameras
 (CRW/CR2, NEF, RAF, DNG, and others).
 .
 This package contains the shared library.
Homepage: https://www.libraw.org

Package: libreadline8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 475
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: readline
Version: 8.2-1.3
Depends: readline-common, libc6 (>= 2.33), libtinfo6 (>= 6)
Description: GNU readline and history libraries, run-time libraries
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.

Package: libregexp-ipv6-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 19
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Version: 0.03-3
Depends: perl
Description: Regular expression for IPv6 addresses
 Regexp::IPv6 exports the $IPv6_re regular expression that matches any valid
 IPv6 address as described in "RFC 2373 - 2.2 Text Representation of
 Addresses" but ::. Any string not compliant with such RFC will be rejected.
Homepage: https://metacpan.org/release/Regexp-IPv6/

Package: librist4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 190
Maintainer: Florian Ernst <florian@debian.org>
Architecture: amd64
Multi-Arch: same
Source: librist
Version: 0.2.7+dfsg-1
Depends: libc6 (>= 2.28), libcjson1 (>= 1.7.5), libmbedcrypto7 (>= 2.28.0)
Description: Reliable Internet Stream Transport -- shared library
 Reliable Internet Stream Transport (RIST) is a transport protocol
 designed for reliable transmission of video over lossy networks
 (including the Internet) with low latency and high quality.
 .
 RIST is intended as a more reliable successor to Secure Reliable
 Transport (SRT), and as an open alternative to proprietary commercial
 options such as Zixi, VideoFlow, QVidium, and DVEO (Dozer).
 .
 This package contains the shared library.
Homepage: https://code.videolan.org/rist/librist

Package: librsvg2-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 10909
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: librsvg
Version: 2.54.7+dfsg-1~deb12u1
Depends: libc6 (>= 2.34), libcairo-gobject2 (>= 1.12.16), libcairo2 (>= 1.15.12), libgcc-s1 (>= 4.2), libgdk-pixbuf-2.0-0 (>= 2.31.1), libglib2.0-0 (>= 2.50.0), libpango-1.0-0 (>= 1.48.11), libpangocairo-1.0-0 (>= 1.48.11), libxml2 (>= 2.9.0)
Recommends: librsvg2-common
Suggests: librsvg2-bin
Description: SAX-based renderer library for SVG files (runtime)
 The rsvg library is an efficient renderer for Scalable Vector Graphics
 (SVG) pictures.
 .
 This package contains the runtime library, necessary to run
 applications using librsvg.
Homepage: https://wiki.gnome.org/Projects/LibRsvg

Package: librsvg2-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 76
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: librsvg
Version: 2.54.7+dfsg-1~deb12u1
Depends: librsvg2-2 (= 2.54.7+dfsg-1~deb12u1), libgdk-pixbuf-2.0-0 (>= 2.23.5-2), libglib2.0-0 (>= 2.50.0)
Description: SAX-based renderer library for SVG files (extra runtime)
 The rsvg library is an efficient renderer for Scalable Vector Graphics
 (SVG) pictures.
 .
 This package includes the gdk-pixbuf loader allowing
 to load SVG images transparently inside GTK+ applications.
Homepage: https://wiki.gnome.org/Projects/LibRsvg

Package: librtmp1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 146
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: rtmpdump (2.4+20151223.gitfa8646d.1-2)
Version: 2.4+20151223.gitfa8646d.1-2+b2
Depends: libc6 (>= 2.14), libgmp10, libgnutls30 (>= 3.6.14), libhogweed6, libnettle8, zlib1g (>= 1:1.1.4)
Description: toolkit for RTMP streams (shared library)
 A small dumper for media content streamed over the RTMP protocol (like BBC's
 iPlayer high quality streams). Supplying an RTMP URL will result in a dumped
 flv file, which can be played/transcoded with standard tools.
 .
 This package contains the shared libraries, header files needed by
 programs that want to use librtmp.
Homepage: http://rtmpdump.mplayerhq.hu/

Package: librubberband2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 391
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: rubberband
Version: 3.1.2+dfsg0-1
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libstdc++6 (>= 11)
Description: audio time-stretching and pitch-shifting library
 Rubber Band is a library and utility program that permits you to
 change the tempo and pitch of an audio recording independently of one
 another.
Homepage: https://www.breakfastquay.com/rubberband/

Package: libsamplerate0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1493
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libsamplerate
Version: 0.2.2-3
Depends: libc6 (>= 2.14)
Description: Audio sample rate conversion library
 libsamplerate (aka Secret Rabbit Code) is a library for audio rate conversion.
 .
 libsamplerate currently provides three different sample rate conversion
 algorithms; zero order hold, linear interpolation and FIR filter interpolation
 (using filters derived from the mathematical SINC function). The first two
 algorithms (zero order hold and linear) are included for completeness and are
 not recommended for any application where high quality sample rate conversion
 is required. For the FIR/Sinc algorithm, three converters are provided;
 SRC_SINC_FASTEST, SRC_SINC_MEDIUM_QUALITY and SRC_SINC_BEST_QUALITY to allow a
 trade off between conversion speed and conversion quality.
 .
 libsamplerate is capable of downsampling to 1/256 of the original sample rate
 and upsampling to 256 times the original sample rate. It is also capable of
 time varying conversions for vary speed effects and synchronising of two
 unlocked sample rates.
Homepage: http://www.mega-nerd.com/SRC/

Package: libsasl2-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 167
Maintainer: Debian Cyrus Team <team+cyrus@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: cyrus-sasl2
Version: 2.1.28+dfsg-10
Replaces: libsasl2
Depends: libsasl2-modules-db (>= 2.1.28+dfsg-10), libc6 (>= 2.34)
Recommends: libsasl2-modules (>= 2.1.28+dfsg-10)
Description: Cyrus SASL - authentication abstraction library
 This is the Cyrus SASL API implementation, version 2.1.
 .
 SASL is the Simple Authentication and Security Layer, a method for
 adding authentication support to connection-based protocols. To use
 SASL, a protocol includes a command for identifying and
 authenticating a user to a server and for optionally negotiating
 protection of subsequent protocol interactions. If its use is
 negotiated, a security layer is inserted between the protocol and the
 connection. See RFC 2222 for more information.
 .
 Any of: ANONYMOUS, SCRAM, CRAM-MD5, DIGEST-MD5, GSSAPI (MIT or Heimdal
 Kerberos 5), NTLM, OTP, PLAIN, or LOGIN can be used.
Homepage: https://www.cyrusimap.org/sasl/

Package: libsasl2-modules-db
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 77
Maintainer: Debian Cyrus Team <team+cyrus@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: cyrus-sasl2
Version: 2.1.28+dfsg-10
Depends: libc6 (>= 2.14), libdb5.3
Description: Cyrus SASL - pluggable authentication modules (DB)
 This is the Cyrus SASL API implementation, version 2.1. See package
 libsasl2-2 and RFC 2222 for more information.
 .
 This package provides the DB plugin, which supports Berkeley DB lookups.
Homepage: https://www.cyrusimap.org/sasl/

Package: libsdl2-2.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1968
Maintainer: Debian SDL packages maintainers <pkg-sdl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libsdl2
Version: 2.26.5+dfsg-1
Replaces: libsdl-1.3-0
Depends: libasound2 (>= 1.0.27), libc6 (>= 2.34), libdecor-0-0 (>= 0.1.0), libdrm2 (>= 2.4.47), libgbm1 (>= 8.1~0), libpulse0 (>= 0.99.1), libsamplerate0 (>= 0.1.7), libwayland-client0 (>= 1.20.0), libwayland-cursor0 (>= 1.18), libwayland-egl1 (>= 1.18), libx11-6 (>= 2:1.2.99.901), libxcursor1 (>> 1.1.2), libxext6, libxfixes3 (>= 1:5.0), libxi6 (>= 2:1.6.99.1), libxkbcommon0 (>= 0.5.0), libxrandr2 (>= 2:1.2.99.3), libxss1
Suggests: xdg-utils
Conflicts: libsdl-1.3-0
Description: Simple DirectMedia Layer
 SDL is a library that allows programs portable low level access to a video
 framebuffer, audio output, mouse, and keyboard.
 .
 This version of SDL is compiled with X11 and Wayland graphics drivers and OSS,
 ALSA, sndio and PulseAudio sound drivers.
Homepage: https://www.libsdl.org/

Package: libseccomp2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 148
Maintainer: Kees Cook <kees@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libseccomp
Version: 2.5.4-1+deb12u1
Depends: libc6 (>= 2.4)
Description: high level interface to Linux seccomp filter
 This library provides a high level interface to constructing, analyzing
 and installing seccomp filters via a BPF passed to the Linux Kernel's
 prctl() syscall.
Homepage: https://github.com/seccomp/libseccomp

Package: libselinux1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 199
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libselinux (3.4-1)
Version: 3.4-1+b6
Depends: libc6 (>= 2.34), libpcre2-8-0 (>= 10.22)
Description: SELinux runtime shared libraries
 This package provides the shared libraries for Security-enhanced
 Linux that provides interfaces (e.g. library functions for the
 SELinux kernel APIs like getcon(), other support functions like
 getseuserbyname()) to SELinux-aware applications. Security-enhanced
 Linux is a patch of the Linux kernel and a number of utilities with
 enhanced security functionality designed to add mandatory access
 controls to Linux.  The Security-enhanced Linux kernel contains new
 architectural components originally developed to improve the security
 of the Flask operating system. These architectural components provide
 general support for the enforcement of many kinds of mandatory access
 control policies, including those based on the concepts of Type
 Enforcement, Role-based Access Control, and Multi-level Security.
 .
 libselinux1 provides an API for SELinux applications to get and set
 process and file security contexts and to obtain security policy
 decisions.  Required for any applications that use the SELinux
 API. libselinux may use the shared libsepol to manipulate the binary
 policy if necessary (e.g. to downgrade the policy format to an older
 version supported by the kernel) when loading policy.
Homepage: https://selinuxproject.org

Package: libsemanage-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 37
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: libsemanage
Version: 3.4-1
Conffiles:
 /etc/selinux/semanage.conf 8e8dfac33a09c1b53ca08bf6d4201b10
Description: Common files for SELinux policy management libraries
 This package provides the common files used by the shared libraries
 for SELinux policy management.
 .
 Security-enhanced Linux is a patch of the Linux kernel and a
 number of utilities with enhanced security functionality designed to
 add mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement, Role-based Access
 Control, and Multi-level Security.
Homepage: https://selinuxproject.org

Package: libsemanage2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 297
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libsemanage (3.4-1)
Version: 3.4-1+b5
Depends: libsemanage-common (>= 3.4-1), libaudit1 (>= 1:2.2.1), libbz2-1.0, libc6 (>= 2.34), libselinux1 (>= 3.4), libsepol2 (>= 3.4)
Breaks: policycoreutils (<< 3.0)
Description: SELinux policy management library
 This package provides the shared libraries for SELinux policy management.
 It uses libsepol for binary policy manipulation and libselinux for
 interacting with the SELinux system.  It also exec's helper programs
 for loading policy and for checking whether the file_contexts
 configuration is valid (load_policy and setfiles from
 policycoreutils) presently, although this may change at least for the
 bootstrapping case
 .
 Security-enhanced Linux is a patch of the Linux kernel and a
 number of utilities with enhanced security functionality designed to
 add mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement, Role-based Access
 Control, and Multi-level Security.
Homepage: https://selinuxproject.org

Package: libsensors-config
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 33
Maintainer: Aurelien Jarno <aurel32@debian.org>
Architecture: all
Multi-Arch: foreign
Source: lm-sensors
Version: 1:3.6.0-7.1
Replaces: libsensors4
Suggests: lm-sensors
Breaks: libsensors4
Conffiles:
 /etc/sensors.d/.placeholder d41d8cd98f00b204e9800998ecf8427e
 /etc/sensors3.conf 41bd2b70a6ce64a21c2d1f70b9eed091
Description: lm-sensors configuration files
 Lm-sensors is a hardware health monitoring package for Linux. It allows you
 to access information from temperature, voltage, and fan speed sensors. It
 works with most newer systems.
 .
 This library is only functional with a Linux kernel, it is provided on
 non-Linux systems for portability reasons only.
 .
 This package contains the configuration files.
Homepage: https://hwmon.wiki.kernel.org/lm_sensors

Package: libsensors5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 87
Maintainer: Aurelien Jarno <aurel32@debian.org>
Architecture: amd64
Multi-Arch: same
Source: lm-sensors
Version: 1:3.6.0-7.1
Depends: libsensors-config, libc6 (>= 2.33)
Suggests: lm-sensors
Description: library to read temperature/voltage/fan sensors
 Lm-sensors is a hardware health monitoring package for Linux. It allows you
 to access information from temperature, voltage, and fan speed sensors. It
 works with most newer systems.
 .
 This library is only functional with a Linux kernel, it is provided on
 non-Linux systems for portability reasons only.
 .
 This package contains a shared library for querying lm-sensors.
Homepage: https://hwmon.wiki.kernel.org/lm_sensors

Package: libsepol2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 775
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libsepol
Version: 3.4-2.1
Depends: libc6 (>= 2.33)
Description: SELinux library for manipulating binary security policies
 Security-enhanced Linux is a patch of the Linux kernel and a number
 of utilities with enhanced security functionality designed to add
 mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement®, Role-based Access
 Control, and Multi-level Security.
 .
 libsepol provides an API for the manipulation of SELinux binary policies.
 It is used by checkpolicy (the policy compiler) and similar tools, as well
 as by programs like load_policy that need to perform specific transformations
 on binary policies such as customizing policy boolean settings.
Homepage: https://selinuxproject.org

Package: libserd-0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 130
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: serd
Version: 0.30.16-1
Depends: libc6 (>= 2.29)
Suggests: serdi
Description: lightweight RDF syntax library
 Serd is a lightweight C library for RDF syntax which supports reading
 and writing Turtle and NTriples.
 .
 Serd is not intended to be a swiss-army knife of RDF syntax, but rather
 is suited to resource limited applications, or situations where a simple
 reader/writer with minimal dependencies is ideal (e.g. in LV2 hosts or
 plugins).
 .
 Serd is:
  * small: Serd is implemented in under 2500 lines1 of standard C code.
  * portable and dependency-free: Serd uses only the C standard library,
    and has no external dependencies, making it a lightweight dependency
    in every sense.
  * fast and lightweight: Serd (and the included serdi tool) can be used
    to stream abbreviated Turtle (unlike many other tools which can not
    stream since they must first build an internal model to abbreviate).
    In other words, Serd can re-serialise an unbounded amount of Turtle
    using a fixed amount of memory, preserving the abbreviations in the
    input.
  * conformant and well-tested: Serd is written to the Turtle, NTriples
    and URI specifications, and includes a comprehensive test suite which
    includes all the normative examples from the Turtle specification, all
    the "normal" examples from the URI specification, and additional tests
    added specifically for Serd. The test suite has over 96% code coverage
    (by line), and runs with zero memory errors or leaks.
Homepage: https://drobilla.net/software/serd/

Package: libshine3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 61
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: shine
Version: 3.1.1-2
Depends: libc6 (>= 2.4)
Description: Fixed-point MP3 encoding library - runtime files
 Shine can be used to encode audio data on architectures with no floating
 point processing unit (FPU) at a much better rate than encoding
 libraries implemented using floating-point arithmetic.
 .
 This package contains the files needed to run a program compiled using
 Shine.
Homepage: https://github.com/savonet/shine

Package: libsigsegv2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 70
Maintainer: Debian Common Lisp Team <debian-common-lisp@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libsigsegv
Version: 2.14-1
Depends: libc6 (>= 2.4)
Description: Library for handling page faults in a portable way
 GNU libsigsegv is a library that allows handling page faults in a
 portable way. It is used e.g. for generational garbage collectors
 and stack overflow handlers.
 .
 This package contains the shared library.
Homepage: https://www.gnu.org/software/libsigsegv/

Package: libslang2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2386
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Architecture: amd64
Multi-Arch: same
Source: slang2
Version: 2.3.3-3
Depends: libc6 (>= 2.35)
Description: S-Lang programming library - runtime version
 S-Lang is a C programmer's library that includes routines for the rapid
 development of sophisticated, user friendly, multi-platform applications.
 .
 This package contains only the shared library libslang.so.* and copyright
 information. It is only necessary for programs that use this library (such
 as jed and slrn). If you plan on doing development with S-Lang, you will
 need the companion -dev package as well.
Built-Using: unicode-data (= 15.0.0-1)
Homepage: http://www.jedsoft.org/slang/

Package: libsm-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 106
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libsm
Version: 2:1.2.3-1
Depends: libsm6 (= 2:1.2.3-1), x11proto-core-dev, libice-dev (>= 1:1.0.0-1)
Suggests: libsm-doc
Description: X11 Session Management library (development headers)
 This package provides the main interface to the X11 Session Management
 library, which allows for applications to both manage sessions, and make use
 of session managers to save and restore their state for later use.
 .
 This package contains the development headers for the library found in libsm6.
 Non-developers likely have little use for this package.
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libSM
Homepage: https://www.x.org

Package: libsm6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 73
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libsm
Version: 2:1.2.3-1
Depends: libc6 (>= 2.14), libice6 (>= 1:1.0.0), libuuid1 (>= 2.16)
Description: X11 Session Management library
 This package provides the main interface to the X11 Session Management
 library, which allows for applications to both manage sessions, and make use
 of session managers to save and restore their state for later use.
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libSM
Homepage: https://www.x.org

Package: libsmartcols1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 289
Maintainer: util-linux packagers <util-linux@packages.debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.38.1-5+deb12u3
Depends: libc6 (>= 2.33)
Description: smart column output alignment library
 This smart column output alignment library is used by fdisk utilities.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/

Package: libsnappy1v5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 89
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: snappy
Version: 1.1.9-3
Depends: libc6 (>= 2.14), libstdc++6 (>= 5.2)
Conflicts: libsnappy1
Description: fast compression/decompression library
 Snappy is a compression/decompression library. It does not aim for
 maximum compression, or compatibility with any other compression
 library; instead, it aims for very high speeds and reasonable
 compression.
 .
 For instance, compared to the fastest mode of zlib, Snappy
 is an order of magnitude faster for most inputs, but the resulting
 compressed files are anywhere from 20% to 100% bigger. On a single core
 of a Core i7 processor in 64-bit mode, Snappy compresses at about 250
 MB/sec or more and decompresses at about 500 MB/sec or more.
Homepage: https://google.github.io/snappy/

Package: libsndfile1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 574
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libsndfile
Version: 1.2.0-1+deb12u1
Depends: libc6 (>= 2.33), libflac12 (>= 1.3.0), libmp3lame0 (>= 3.100), libmpg123-0 (>= 1.28.0), libogg0 (>= 1.3.0), libopus0 (>= 1.1), libvorbis0a (>= 1.2.3), libvorbisenc2 (>= 1.1.2)
Description: Library for reading/writing audio files
 libsndfile is a library of C routines for reading and writing files containing
 sampled audio data.
 .
 Various versions of WAV (integer, floating point, GSM, and compressed formats);
 Microsoft PCM, A-law and u-law formats; AIFF, AIFC and RIFX; various AU/SND
 formats (Sun/NeXT, Dec AU, G721 and G723 ADPCM); RAW header-less PCM files;
 Amiga IFF/8SVX/16SV PCM files; Ensoniq PARIS  (.PAF); Apple's Core Audio Format
 (CAF) and others.
Homepage: http://www.mega-nerd.com/libsndfile/

Package: libsndio7.0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 88
Maintainer: Peter Piwowarski <peterjpiwowarski@gmail.com>
Architecture: amd64
Multi-Arch: same
Source: sndio (1.9.0-0.3)
Version: 1.9.0-0.3+b2
Replaces: libsndio7.1 (<= 1.8.1-1~exp2)
Depends: libasound2 (>= 1.0.17), libbsd0 (>= 0.0), libc6 (>= 2.33)
Suggests: sndiod
Breaks: libsndio7.1 (<= 1.8.1-1~exp2)
Description: Small audio and MIDI framework from OpenBSD, runtime libraries
 Sndio is a small, simple audio and MIDI framework, developed by the OpenBSD
 project. It provides a lightweight audio and MIDI server and a well-documented
 userspace API to access the server or audio hardware in a uniform way. Sndio is
 designed to work well for both desktop and professional music applications, and
 supports features found in more complex sound systems such as per-application
 volume control, software mixing, and network transparency.
 .
 This package contains the sndio userspace libraries.
Homepage: https://www.sndio.org/

Package: libsodium23
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 415
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libsodium
Version: 1.0.18-1+deb12u1
Depends: libc6 (>= 2.34)
Description: Network communication, cryptography and signaturing library
 NaCl (pronounced "salt") is a new easy-to-use high-speed software library for
 network communication, encryption, decryption, signatures, etc.
 .
 NaCl's goal is to provide all of the core operations needed to build
 higher-level cryptographic tools.
 .
 Sodium is a portable, cross-compilable, installable, packageable fork of NaCl,
 with a compatible API.
Homepage: https://www.libsodium.org/

Package: libsombok3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 125
Maintainer: Emmanuel Bouthenot <kolter@debian.org>
Architecture: amd64
Multi-Arch: same
Source: sombok (2.4.0-2)
Version: 2.4.0-2+b1
Depends: libthai0 (>= 0.1.12), libc6 (>= 2.14)
Description: Unicode Text Segmentation library
 Sombok library performs Line Breaking Algorithm described in Unicode
 Standards Annex #14 (UAX #14). East_Asian_Width informative properties
 defined by Annex #11 (UAX #11) may be concerned to determin breaking
 positions. This library also implements “default” Grapheme Cluster
 segmentation described in Annex #29 (UAX #29).
Homepage: https://github.com/hatukanezumi/sombok

Package: libsord-0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 58
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: sord
Version: 0.16.14+git221008-1
Depends: libc6 (>= 2.14), libserd-0-0 (>= 0.30)
Suggests: sordi
Description: library for storing RDF data in memory
 Sord is a lightweight C library for storing Resource
 Description Framework (RDF) data in memory.
 .
 Sord includes man pages for the library (man sord) and a
 simple command line utility (man sordi).
Homepage: https://drobilla.net/software/sord.html

Package: libsoxr0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 229
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libsoxr
Version: 0.1.3-4
Depends: libc6 (>= 2.29), libgomp1 (>= 4.9)
Description: High quality 1D sample-rate conversion library
 The SoX Resampler library `libsoxr' performs one-dimensional sample-rate
 conversion - it may be used, for example, to resample PCM-encoded audio.
 .
 It aims to give fast and high quality results for any constant (rational or
 irrational) resampling ratio. Phase-response, preserved bandwidth, aliasing,
 and rejection level parameters are all configurable; alternatively, simple
 `preset' configurations may be selected.
 .
 A simple API is provided that allows interfacing using commonly-used sample
 formats and buffering schemes.
Homepage: http://sourceforge.net/projects/soxr/

Package: libspeex1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 125
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: speex
Version: 1.2.1-2
Depends: libc6 (>= 2.29)
Suggests: speex
Description: The Speex codec runtime library
 Speex is an audio codec especially designed for compressing voice at low
 bit-rates for applications such as voice over IP (VoIP). In some senses,
 it is meant to be complementary to the Vorbis codec which places a greater
 emphasis on high-quality music reproduction.
 .
 This package provides the speex runtime library.
Homepage: https://www.speex.org/

Package: libsphinxbase3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 326
Maintainer: Debian Accessibility Team <pkg-a11y-devel@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: same
Source: sphinxbase
Version: 0.8+5prealpha+1-16
Depends: libblas3 | libblas.so.3, libc6 (>= 2.34), liblapack3 | liblapack.so.3, libpulse0 (>= 0.99.1)
Description: Speech recognition tool - shared library
 CMU Sphinx is a large vocabulary, speaker-independent continuous speech
 recognition engine.
 .
 This package contains the shared library.
Homepage: https://cmusphinx.sourceforge.net/

Package: libsqlite3-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1682
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: sqlite3
Version: 3.40.1-2+deb12u2
Depends: libc6 (>= 2.34)
Breaks: crowdsec (<< 1.4), python-migrate (<< 0.11.0-4~), python3-migrate (<< 0.11.0-4~)
Description: SQLite 3 shared library
 SQLite is a C library that implements an SQL database engine.
 Programs that link with the SQLite library can have SQL database
 access without running a separate RDBMS process.
Homepage: https://www.sqlite.org/

Package: libsratom-0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 60
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: sratom
Version: 0.6.14-1
Depends: libc6 (>= 2.14), libserd-0-0 (>= 0.30.2), libsord-0-0 (>= 0.12.0~dfsg0)
Description: library for serialising LV2 atoms to/from Turtle
 Sratom is a new C library for serialising LV2 atoms to/from Turtle.
 It is intended to be a full serialisation solution for LV2 atoms,
 allowing implementations to serialise binary atoms to strings and
 read them back again. This is particularly useful for saving plugin
 state, or implementing plugin control with network transparency.
 Sratom uses Serd and Sord to do the work, it is a small library
 implemented in a single source file, suitable for direct inclusion
 in projects if avoiding a dependency is desired.
Homepage: https://drobilla.net/software/sratom/

Package: libsrt1.5-gnutls
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 911
Maintainer: Florian Ernst <florian@debian.org>
Architecture: amd64
Multi-Arch: same
Source: srt
Version: 1.5.1-1+deb12u1
Replaces: libsrt1-gnutls
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libgnutls30 (>= 3.7.0), libnettle8, libstdc++6 (>= 11)
Breaks: libsrt1-gnutls
Description: Secure Reliable Transport UDP streaming library (GnuTLS flavour)
 SRT is a latency-aware UDP transport mechanism optimized for video streams.
 It detects and compensates for jitter and bandwidth fluctuations due to
 network congestion. It mitigates packet loss and supports AES encryption.
 .
 SSL support is provided by GnuTLS.
Homepage: https://github.com/Haivision/srt

Package: libss2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 71
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs (1.47.0-2)
Version: 1.47.0-2+b2
Replaces: e2fsprogs (<< 1.34-1)
Depends: libcom-err2, libc6 (>= 2.34)
Description: command-line interface parsing library
 libss provides a simple command-line interface parser which will
 accept input from the user, parse the command into an argv argument
 vector, and then dispatch it to a handler function.
 .
 It was originally inspired by the Multics SubSystem library.
Homepage: http://e2fsprogs.sourceforge.net

Package: libssh-gcrypt-4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 637
Maintainer: Laurent Bigonville <bigon@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libssh
Version: 0.10.6-0+deb12u2
Depends: libc6 (>= 2.33), libgcrypt20 (>= 1.10.0), libgpg-error0 (>= 1.14), libgssapi-krb5-2 (>= 1.17), zlib1g (>= 1:1.1.4)
Description: tiny C SSH library (gcrypt flavor)
 The ssh library was designed to be used by programmers needing a working SSH
 implementation by the mean of a library. The complete control of the client
 is made by the programmer. With libssh, you can remotely execute programs,
 transfer files, use a secure and transparent tunnel for your remote programs.
 With its SFTP implementation, you can play with remote files easily.
 .
 This package contains shared libraries linked against gcrypt.
Homepage: https://www.libssh.org/

Package: libssh2-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 353
Maintainer: Nicolas Mora <babelouest@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libssh2
Version: 1.10.0-3+deb12u1
Depends: libc6 (>= 2.14), libssl3 (>= 3.0.0), zlib1g (>= 1:1.1.4)
Description: SSH2 client-side library
 libssh2 is a client-side C library implementing the SSH2 protocol.
 It supports regular terminal, SCP and SFTP (v1-v5) sessions;
 port forwarding, X11 forwarding; password, key-based and
 keyboard-interactive authentication.
 .
 This package contains the runtime library.
Homepage: https://libssh2.org/

Package: libssl3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 6030
Maintainer: Debian OpenSSL Team <pkg-openssl-devel@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: same
Source: openssl
Version: 3.0.20-1~deb12u2
Depends: libc6 (>= 2.34)
Description: Secure Sockets Layer toolkit - shared libraries
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 It provides the libssl and libcrypto shared libraries.
Homepage: https://www.openssl.org/

Package: libstdc++-12-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 19446
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.2.0-14+deb12u1
Provides: libstdc++-dev
Depends: gcc-12-base (= 12.2.0-14+deb12u1), libgcc-12-dev (= 12.2.0-14+deb12u1), libstdc++6 (>= 12.2.0-14+deb12u1), libc6-dev (>= 2.23-1~)
Suggests: libstdc++-12-doc
Description: GNU Standard C++ Library v3 (development files)
 This package contains the headers and static library files necessary for
 building C++ programs which use libstdc++.
 .
 libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
 was included up to g++-2.95. The first version of libstdc++-v3 appeared
 in g++-3.0.
Homepage: http://gcc.gnu.org/

Package: libstdc++6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2686
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.2.0-14+deb12u1
Replaces: libstdc++6-12-dbg (<< 4.9.0-3)
Depends: gcc-12-base (= 12.2.0-14+deb12u1), libc6 (>= 2.36), libgcc-s1 (>= 4.2)
Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Conflicts: scim (<< 1.4.2-1)
Description: GNU Standard C++ Library v3
 This package contains an additional runtime library for C++ programs
 built with the GNU compiler.
 .
 libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
 was included up to g++-2.95. The first version of libstdc++-v3 appeared
 in g++-3.0.
Homepage: http://gcc.gnu.org/

Package: libsvtav1enc1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 6632
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: svt-av1
Version: 1.4.1+dfsg-1
Depends: libc6 (>= 2.34)
Description: Scalable Video Technology for AV1 (libsvtav1enc shared library)
 The Scalable Video Technology for AV1 (SVT-AV1 Encoder and Decoder) is an
 AV1-compliant encoder/decoder library core. The SVT-AV1 encoder development
 is a work-in-progress targeting performance levels applicable to both VOD and
 Live encoding / transcoding video applications. The SVT-AV1 decoder
 implementation is targeting future codec research activities.
 .
 This package provides the shared library libsvtav1enc.
Homepage: https://gitlab.com/AOMediaCodec/SVT-AV1

Package: libswresample4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 236
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ffmpeg
Version: 7:5.1.9-0+deb12u1
Depends: libavutil57 (>= 7:5.1), libc6 (>= 2.29), libsoxr0 (>= 0.1.0)
Description: FFmpeg library for audio resampling, rematrixing etc. - runtime files
 FFmpeg is the leading multimedia framework, able to decode, encode, transcode,
 mux, demux, stream, filter and play pretty much anything that humans and
 machines have created. It supports the most obscure ancient formats up to the
 cutting edge.
 .
 This library performs highly optimized audio resampling, rematrixing
 and sample format conversion operations.
 Specifically, this library performs the following conversions:
  * Resampling is the process of changing the audio rate, for example from a
    high sample rate of 44100Hz to 8000Hz. Audio conversion from high to low
    sample rate is a lossy process. Several resampling options and algorithms
    are available.
  * Rematrixing is the process of changing the channel layout, for example from
    stereo to mono. When the input channels cannot be mapped to the output
    streams, the process is lossy, since it involves different gain factors
    and mixing. Various other audio conversions (e.g. stretching and padding)
    are enabled through dedicated options.
  * Format conversion is the process of converting the type of samples, for
    example from 16-bit signed samples to unsigned 8-bit or float samples.
    It also handles packing conversion, when passing from packed layout (all
    samples belonging to distinct channels interleaved in the same buffer), to
    planar layout (all samples belonging to the same channel stored in a
    dedicated buffer or "plane").
 .
 This package contains the runtime files.
Homepage: https://ffmpeg.org/

Package: libswscale6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 760
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ffmpeg
Version: 7:5.1.9-0+deb12u1
Depends: libavutil57 (= 7:5.1.9-0+deb12u1), libc6 (>= 2.34)
Description: FFmpeg library for image scaling and various conversions - runtime files
 FFmpeg is the leading multimedia framework, able to decode, encode, transcode,
 mux, demux, stream, filter and play pretty much anything that humans and
 machines have created. It supports the most obscure ancient formats up to the
 cutting edge.
 .
 This library performs highly optimized image scaling and colorspace and pixel
 format conversion operations.
 Specifically, this library performs the following conversions:
  * Rescaling is the process of changing the video size. Several rescaling
    options and algorithms are available. This is usually a lossy process.
  * Pixel format conversion is the process of converting the image format and
    colorspace of the image, for example from planar YUV420P to RGB24 packed.
    It also handles packing conversion, that is converts from packed layout
    (all pixels belonging to distinct planes interleaved in the same buffer),
    to planar layout (all samples belonging to the same plane stored in a
    dedicated buffer or "plane"). This is usually a lossy process in case the
    source and destination colorspaces differ.
 .
 This package contains the runtime files.
Homepage: https://ffmpeg.org/

Package: libsystemd-shared
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 5350
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 252.39-1~deb12u2
Depends: libacl1 (>= 2.2.23), libapparmor1 (>= 2.13), libaudit1 (>= 1:2.2.1), libblkid1 (>= 2.24), libc6 (>= 2.36), libcap2 (>= 1:2.10), libcrypt1 (>= 1:4.4.0), libgcrypt20 (>= 1.10.0), libip4tc2 (>= 1.8.3), libkmod2 (>= 15), liblz4-1 (>= 0.0~r130), liblzma5 (>= 5.1.1alpha+20120614), libmount1 (>= 2.30), libpam0g (>= 0.99.7.1), libseccomp2 (>= 2.4.1), libselinux1 (>= 3.1~), libssl3 (>= 3.0.0), libzstd1 (>= 1.5.2)
Description: systemd shared private library
 This internal shared library provides common code used by various systemd
 components. It is supposed to decrease memory and disk footprint.
 The shared library is not meant for public use and is not API or ABI stable.
Homepage: https://www.freedesktop.org/wiki/Software/systemd

Package: libsystemd0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 909
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 252.39-1~deb12u2
Depends: libc6 (>= 2.34), libcap2 (>= 1:2.10), libgcrypt20 (>= 1.10.0), liblz4-1 (>= 0.0~r122), liblzma5 (>= 5.1.1alpha+20120614), libzstd1 (>= 1.5.2)
Description: systemd utility library
 This library provides APIs to interface with various system components such as
 the system journal, the system service manager, D-Bus and more.
Homepage: https://www.freedesktop.org/wiki/Software/systemd

Package: libtasn1-6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 116
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Version: 4.19.0-2+deb12u1
Depends: libc6 (>= 2.14)
Description: Manage ASN.1 structures (runtime)
 Manage ASN1 (Abstract Syntax Notation One) structures.
 The main features of this library are:
   * on-line ASN1 structure management that doesn't require any C code
     file generation.
   * off-line ASN1 structure management with C code file generation
     containing an array.
   * DER (Distinguish Encoding Rules) encoding
   * no limits for INTEGER and ENUMERATED values
 .
 This package contains runtime libraries.
Homepage: https://www.gnu.org/software/libtasn1/

Package: libterm-readkey-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 73
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: libterm-readkey-perl (2.38-2)
Version: 2.38-2+b1
Depends: perl (>= 5.36.0-4), perlapi-5.36.0, libc6 (>= 2.28)
Description: perl module for simple terminal control
 Term::ReadKey is a compiled perl module dedicated to providing simple
 control over terminal driver modes (cbreak, raw, cooked, etc.) support for
 non-blocking reads, if the architecture allows, and some generalized handy
 functions for working with terminals. One of the main goals is to have the
 functions as portable as possible, so you can just plug in "use
 Term::ReadKey" on any architecture and have a good likelihood of it working.
Homepage: https://metacpan.org/release/TermReadKey

Package: libthai-data
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 626
Maintainer: Theppitak Karoonboonyanan <thep@debian.org>
Architecture: all
Multi-Arch: foreign
Source: libthai
Version: 0.1.29-1
Breaks: libthai0 (<< 0.1.10)
Description: Data files for Thai language support library
 LibThai is a set of Thai language support routines aimed to ease
 developers' tasks to incorporate Thai language support in their applications.
 It includes important Thai-specific functions e.g. word breaking, input and
 output methods as well as basic character and string supports.
 .
 This package contains data files needed by the LibThai library.
Homepage: https://linux.thai.net/projects/libthai

Package: libthai0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 99
Maintainer: Theppitak Karoonboonyanan <thep@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libthai
Version: 0.1.29-1
Depends: libthai-data (>= 0.1.10), libc6 (>= 2.14), libdatrie1 (>= 0.2.0)
Enhances: libqtcore4, libqtgui4
Description: Thai language support library
 LibThai is a set of Thai language support routines aimed to ease
 developers' tasks to incorporate Thai language support in their applications.
 It includes important Thai-specific functions e.g. word breaking, input and
 output methods as well as basic character and string supports.
 .
 This package contains the shared libraries needed to run programs that use
 the LibThai library.
Homepage: https://linux.thai.net/projects/libthai

Package: libtheora0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 648
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libtheora
Version: 1.1.1+dfsg.1-16.1+deb12u1
Depends: libc6 (>= 2.14), libcairo2 (>= 1.2.4), libogg0 (>= 1.1.0)
Description: Theora Video Compression Codec
 Theora is an open video codec being developed by the Xiph.org Foundation as
 part of their Ogg project. Theora is originally derived from On2's VP3 codec,
 and has improved on it significantly with the merging of code from the
 Thusnelda branch.
Homepage: https://www.theora.org/

Package: libtiff-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1277
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: tiff
Version: 4.5.0-6+deb12u4
Replaces: libtiff4-dev (<< 4.0.3-6~), libtiff5-alt-dev (<< 4.0.3-6~), libtiff5-dev (<< 4.0.10-1~)
Depends: libc6-dev | libc-dev, libjbig-dev, libjpeg-dev, liblzma-dev, libzstd-dev, libwebp-dev, libtiff6 (= 4.5.0-6+deb12u4), libtiffxx6 (= 4.5.0-6+deb12u4), zlib1g-dev, libdeflate-dev, liblerc-dev
Breaks: libtiff4-dev (<< 4.0.3-6~), libtiff5-alt-dev (<< 4.0.3-6~), libtiff5-dev (<< 4.0.10-1~)
Description: Tag Image File Format library (TIFF), development files
 libtiff is a library providing support for the Tag Image File Format
 (TIFF), a widely used format for storing image data.  This package
 includes the development files, static library, and header files.
Homepage: https://libtiff.gitlab.io/libtiff/

Package: libtiff6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 716
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: tiff
Version: 4.5.0-6+deb12u4
Depends: libc6 (>= 2.33), libdeflate0 (>= 1.0), libjbig0 (>= 2.0), libjpeg62-turbo (>= 1.3.1), liblerc4 (>= 3.0), liblzma5 (>= 5.1.1alpha+20120614), libwebp7 (>= 1.2.4), libzstd1 (>= 1.5.2), zlib1g (>= 1:1.1.4)
Description: Tag Image File Format (TIFF) library
 libtiff is a library providing support for the Tag Image File Format
 (TIFF), a widely used format for storing image data.  This package
 includes the shared library.
Homepage: https://libtiff.gitlab.io/libtiff/

Package: libtiffxx6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 164
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: tiff
Version: 4.5.0-6+deb12u4
Depends: libc6 (>= 2.4), libstdc++6 (>= 5), libtiff6 (>= 4.0.3)
Description: Tag Image File Format (TIFF) library -- C++ interface
 libtiff is a library providing support for the Tag Image File Format
 (TIFF), a widely used format for storing image data.  This package
 includes the shared library for the experimental C++ interfaces.
Homepage: https://libtiff.gitlab.io/libtiff/

Package: libtimedate-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 127
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2.3300-2
Depends: perl:any
Description: collection of modules to manipulate date/time information
 TimeDate is a collection of Perl modules useful for manipulating date and
 time information. Date::Parse can parse absolute date specifications in a
 wide variety of input formats and many languages (via Date::Language).
 .
 This package also includes Date::Format, which can format dates into strings,
 as well as Time::Zone, which contains miscellaneous time zone functions.
Homepage: https://metacpan.org/release/TimeDate

Package: libtinfo6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 541
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.4-4
Depends: libc6 (>= 2.34)
Description: shared low-level terminfo library for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared low-level terminfo library.
Homepage: https://invisible-island.net/ncurses/

Package: libtirpc-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 35
Maintainer: Josue Ortega <josue@debian.org>
Architecture: all
Multi-Arch: foreign
Source: libtirpc
Version: 1.3.3+ds-1
Replaces: libtirpc1, libtirpc3 (<< 1.1.4-0.1~)
Breaks: libtirpc1, libtirpc3 (<< 1.1.4-0.1~)
Conffiles:
 /etc/netconfig ca8db53e3af4d735335c2607d21c7195
Description: transport-independent RPC library - common files
 This package contains a port of Sun's transport-independent RPC library to
 Linux. The library is intended as a replacement for the RPC code in the GNU C
 library, providing among others support for RPC (and in turn, NFS) over IPv6.
 .
 This package contains the netconfig configuration file as well as the
 associated manpage.
Homepage: http://sourceforge.net/projects/libtirpc

Package: libtirpc-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 717
Maintainer: Josue Ortega <josue@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libtirpc
Version: 1.3.3+ds-1
Depends: libtirpc3 (= 1.3.3+ds-1)
Description: transport-independent RPC library - development files
 This package contains a port of Sun's transport-independent RPC library to
 Linux. The library is intended as a replacement for the RPC code in the GNU C
 library, providing among others support for RPC (and in turn, NFS) over IPv6.
 .
 This package contains the files needed for development against libtirpc.
Homepage: http://sourceforge.net/projects/libtirpc

Package: libtirpc3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 226
Maintainer: Josue Ortega <josue@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libtirpc
Version: 1.3.3+ds-1
Depends: libc6 (>= 2.34), libgssapi-krb5-2 (>= 1.17), libtirpc-common (>= 1.3.3+ds-1)
Breaks: nfs-common (<< 1:1.2.8-7), nfs-kernel-server (<< 1:1.2.8-7)
Description: transport-independent RPC library
 This package contains a port of Sun's transport-independent RPC library to
 Linux. The library is intended as a replacement for the RPC code in the GNU C
 library, providing among others support for RPC (and in turn, NFS) over IPv6.
Homepage: http://sourceforge.net/projects/libtirpc

Package: libtool
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 1213
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2.4.7-7~deb12u1
Depends: gcc | c-compiler, cpp, libc6-dev | libc-dev, file, autotools-dev
Recommends: libltdl-dev
Suggests: libtool-doc, autoconf, automaken, gfortran | fortran95-compiler, gcj-jdk
Description: Generic library support script
 This is GNU libtool, a generic library support script.  Libtool hides
 the complexity of generating special library types (such as shared
 libraries) behind a consistent interface.  To use libtool, add the
 new generic library building commands to your Makefile, Makefile.in,
 or Makefile.am.  See the documentation for details.  Libtool supports
 building static libraries on all platforms.
 .
 Libtool supports generation of C, C++, Fortran and Java libraries.
Homepage: https://www.gnu.org/software/libtool/

Package: libtsan2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 7815
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.2.0-14+deb12u1
Depends: gcc-12-base (= 12.2.0-14+deb12u1), libc6 (>= 2.34), libgcc-s1 (>= 3.3)
Description: ThreadSanitizer -- a Valgrind-based detector of data races (runtime)
 ThreadSanitizer (Tsan) is a data race detector for C/C++ programs.
 The Linux and Mac versions are based on Valgrind.
Homepage: http://gcc.gnu.org/

Package: libtwolame0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 147
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: twolame
Version: 0.4.0-2
Depends: libc6 (>= 2.29)
Description: MPEG Audio Layer 2 encoding library
 TwoLAME is an optimized MPEG Audio Layer 2 encoder. It is based on tooLAME by
 Mike Cheng, which in turn is based upon the ISO dist10 code and portions of
 LAME.
 .
 TwoLAME does NOT support MPEG Audio Layer 3 (MP3) encoding due to patent
 issues surrounding MP3.
 .
 However, as most MPEG Audio players are able to play layer 2 (MP2) files,
 TwoLAME makes a very good drop-in replacement for LAME and other layer 3
 encoders.
 .
 This package contains the shared library.
Homepage: http://www.twolame.org

Package: libubsan1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 2652
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-12
Version: 12.2.0-14+deb12u1
Depends: gcc-12-base (= 12.2.0-14+deb12u1), libc6 (>= 2.34), libgcc-s1 (>= 3.3), libstdc++6 (>= 4.1.1)
Description: UBSan -- undefined behaviour sanitizer (runtime)
 UndefinedBehaviorSanitizer can be enabled via -fsanitize=undefined.
 Various computations will be instrumented to detect undefined behavior
 at runtime. Available for C and C++.
Homepage: http://gcc.gnu.org/

Package: libuchardet0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 208
Maintainer: James Cowgill <jcowgill@debian.org>
Architecture: amd64
Multi-Arch: same
Source: uchardet
Version: 0.0.7-1
Depends: libc6 (>= 2.4), libgcc-s1 (>= 3.0), libstdc++6 (>= 4.1.1)
Description: universal charset detection library - shared library
 uchardet is a C language binding of the original C++ implementation
 of the universal charset detection library by Mozilla.
 .
 uchardet is a encoding detector library, which takes a sequence of
 bytes in an unknown character encoding without any additional
 information, and attempts to determine the encoding of the text.
 .
 This package contains the shared library.
Homepage: https://www.freedesktop.org/wiki/Software/uchardet/

Package: libudev1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 240
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 252.39-1~deb12u2
Depends: libc6 (>= 2.34)
Description: libudev shared library
 This library provides APIs to introspect and enumerate devices on the local
 system.
Homepage: https://www.freedesktop.org/wiki/Software/systemd

Package: libudfread0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 56
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libudfread
Version: 1.1.2-1
Depends: libc6 (>= 2.14)
Description: UDF reader library
 This library allows reading UDF filesystems, like raw devices and image files.
 .
 The library is created and maintained by VideoLAN Project and is used by
 projects like VLC and Kodi.
Homepage: https://www.videolan.org/developers/libudfread.html

Package: libunbound8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1236
Maintainer: unbound packagers <unbound@packages.debian.org>
Architecture: amd64
Multi-Arch: same
Source: unbound
Version: 1.17.1-2+deb12u4
Depends: libc6 (>= 2.34), libevent-2.1-7 (>= 2.1.8-stable), libgmp10 (>= 2:6.2.1+dfsg1), libhogweed6, libnettle8
Description: library implementing DNS resolution and validation
 libunbound performs and validates DNS lookups; it can be used to convert
 hostnames to IP addresses and back and obtain other information from the
 DNS. Cryptographic validation of results is performed with DNSSEC.
Homepage: https://www.unbound.net/

Package: libunicode-linebreak-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 262
Maintainer: Emmanuel Bouthenot <kolter@debian.org>
Architecture: amd64
Source: libunicode-linebreak-perl (0.0.20190101-1)
Version: 0.0.20190101-1+b5
Depends: perl (>= 5.36.0-4), perlapi-5.36.0, libc6 (>= 2.4), libsombok3 (>= 2.3.1-1~), libmime-charset-perl (>= 1.006.2)
Description: UAX #14 Unicode Line Breaking Algorithm
 Unicode::LineBreak performs Line Breaking Algorithm described in Unicode
 Standards Annex #14 [UAX #14]. East_Asian_Width informative properties
 defined by Annex #11 [UAX #11] will be concerned to determine breaking
 positions.
Homepage: https://github.com/hatukanezumi/Unicode-LineBreak

Package: libunistring2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1807
Maintainer: Jörg Frings-Fürst <debian@jff.email>
Architecture: amd64
Multi-Arch: same
Source: libunistring
Version: 1.0-2
Depends: libc6 (>= 2.34)
Description: Unicode string library for C
 The 'libunistring' library implements Unicode strings (in the UTF-8,
 UTF-16, and UTF-32 encodings), together with functions for Unicode
 characters (character names, classifications, properties) and
 functions for string processing (formatted output, width, word
 breaks, line breaks, normalization, case folding, regular
 expressions).
 .
 This package contains the shared library.
Homepage: https://www.gnu.org/software/libunistring/

Package: liburi-perl
Status: install ok installed
Priority: optional
Section: perl
Installed-Size: 237
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 5.17-1
Depends: perl:any, libregexp-ipv6-perl
Suggests: libbusiness-isbn-perl (>= 3.005), libwww-perl
Description: module to manipulate and access URI strings
 URI is a collection of Perl modules that represent and manipulate Uniform
 Resource Identifier (URI) references as specified in RFC 2396.
 .
 URI objects can be used to access and manipulate the various components
 that make up these strings.  There are also methods to combine URIs in
 various ways.
 .
 The URI class replaces the URI::URL class that used to be distributed with
 libwww-perl. This package also includes an emulation of the old URI::URL
 interface, which implements both the old and the new interface.
Homepage: https://metacpan.org/release/URI

Package: liburing2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 44
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: amd64
Multi-Arch: same
Source: liburing
Version: 2.3-3
Depends: libc6 (>= 2.4)
Description: Linux kernel io_uring access library - shared library
 This library provides helpers to setup and teardown io_uring instances,
 and also a simplified interface for applications that do not need (or
 want) to deal with the full kernel side implementation.
 .
 This package contains the shared library.
Homepage: https://github.com/axboe/liburing

Package: libusb-1.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 155
Maintainer: Aurelien Jarno <aurel32@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libusb-1.0
Version: 2:1.0.26-1
Depends: libc6 (>= 2.17), libudev1 (>= 183)
Description: userspace USB programming library
 Library for programming USB applications without the knowledge
 of Linux kernel internals.
 .
 This package contains what you need to run programs that use this
 library.
Homepage: http://www.libusb.info

Package: libutempter0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 50
Maintainer: Christian Göttsche <cgzones@googlemail.com>
Architecture: amd64
Multi-Arch: same
Source: libutempter
Version: 1.2.1-3
Depends: libc6 (>= 2.34)
Description: privileged helper for utmp/wtmp updates (runtime)
 The libutempter library provides interface for terminal emulators such as
 screen and xterm to record user sessions to utmp and wtmp files.
 .
 The utempter is a privileged helper used by libutempter library to manipulate
 utmp and wtmp files.
Homepage: https://git.altlinux.org/people/ldv/packages/?p=libutempter.git

Package: libuuid1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 79
Maintainer: util-linux packagers <util-linux@packages.debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.38.1-5+deb12u3
Depends: libc6 (>= 2.25)
Recommends: uuid-runtime
Description: Universally Unique ID library
 The libuuid library generates and parses 128-bit Universally Unique
 IDs (UUIDs). A UUID is an identifier that is unique within the space
 of all such identifiers across both space and time. It can be used for
 multiple purposes, from tagging objects with an extremely short lifetime
 to reliably identifying very persistent objects across a network.
 .
 See RFC 4122 for more information.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/

Package: libuutil3linux
Status: install ok installed
Priority: optional
Section: contrib/libs
Installed-Size: 153
Maintainer: Debian ZFS on Linux maintainers <pkg-zfsonlinux-devel@alioth-lists.debian.net>
Architecture: amd64
Source: zfs-linux
Version: 2.1.11-1+deb12u1
Replaces: libuutil1, libuutil3
Depends: libc6 (>= 2.34)
Breaks: libuutil1, libuutil3
Description: Solaris userland utility library for Linux
 This library provides a variety of glue functions for ZFS on Linux:
  * libspl: The Solaris Porting Layer userland library, which provides APIs
    that make it possible to run Solaris user code in a Linux environment
    with relatively minimal modification.
  * libavl: The Adelson-Velskii Landis balanced binary tree manipulation
    library.
  * libefi: The Extensible Firmware Interface library for GUID disk
    partitioning.
  * libshare: NFS, SMB, and iSCSI service integration for ZFS.
Homepage: https://zfsonlinux.org/

Package: libuv1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 294
Maintainer: Dominique Dumont <dod@debian.org>
Architecture: amd64
Multi-Arch: same
Version: 1.44.2-1+deb12u1
Depends: libc6 (>= 2.34)
Description: asynchronous event notification library - runtime library
 Libuv is the asynchronous library behind Node.js. Very similar to libevent or
 libev, it provides the main elements for event driven systems: watching and
 waiting for availability in a set of sockets, and some other events like timers
 or asynchronous messages. However, libuv also comes with some other extras
 like:
  * files watchers and asynchronous operations
  * a portable TCP and UDP API, as well as asynchronous DNS resolution
  * processes and threads management, and a portable inter-process
    communications mechanism, with pipes and work queues
  * a plugins mechanism for loading libraries dynamically
  * interface with external libraries that also need to access the I/O.
 .
 This package includes the dynamic library against which you can link
 your program.
Homepage: https://github.com/libuv/libuv

Package: libva-drm2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 43
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libva
Version: 2.17.0-1
Depends: libc6 (>= 2.34), libdrm2 (>= 2.4.60), libva2 (>= 2.17.0), libva2 (<< 2.17.0.1)
Description: Video Acceleration (VA) API for Linux -- DRM runtime
 Video Acceleration API (VA API) is a library ("libVA") and API specification
 which enables and provides access to graphics hardware (GPU) acceleration for
 video processing on Linux and UNIX based operating systems. Accelerated
 processing includes video decoding, video encoding, subpicture blending and
 rendering. The specification was originally designed by Intel for its GMA
 (Graphics Media Accelerator) series of GPU hardware, the API is however not
 limited to GPUs or Intel specific hardware, as other hardware and manufacturers
 can also freely use this API for hardware accelerated video decoding.
 .
 This package provides the libva-drm library.
Homepage: https://01.org/linuxmedia/vaapi

Package: libva-x11-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 55
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libva
Version: 2.17.0-1
Depends: libc6 (>= 2.33), libdrm2 (>= 2.4.60), libva2 (>= 2.17.0), libva2 (<< 2.17.0.1), libx11-6 (>= 2:1.4.99.1), libx11-xcb1 (>= 2:1.8.3), libxcb-dri3-0, libxcb1, libxext6, libxfixes3
Description: Video Acceleration (VA) API for Linux -- X11 runtime
 Video Acceleration API (VA API) is a library ("libVA") and API specification
 which enables and provides access to graphics hardware (GPU) acceleration for
 video processing on Linux and UNIX based operating systems. Accelerated
 processing includes video decoding, video encoding, subpicture blending and
 rendering. The specification was originally designed by Intel for its GMA
 (Graphics Media Accelerator) series of GPU hardware, the API is however not
 limited to GPUs or Intel specific hardware, as other hardware and manufacturers
 can also freely use this API for hardware accelerated video decoding.
 .
 This package provides the libva-x11 library.
Homepage: https://01.org/linuxmedia/vaapi

Package: libva2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 217
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libva
Version: 2.17.0-1
Provides: libva-driver-abi-1.0, libva-driver-abi-1.1, libva-driver-abi-1.10, libva-driver-abi-1.11, libva-driver-abi-1.12, libva-driver-abi-1.13, libva-driver-abi-1.14, libva-driver-abi-1.15, libva-driver-abi-1.16, libva-driver-abi-1.17, libva-driver-abi-1.2, libva-driver-abi-1.3, libva-driver-abi-1.4, libva-driver-abi-1.5, libva-driver-abi-1.6, libva-driver-abi-1.7, libva-driver-abi-1.8, libva-driver-abi-1.9
Depends: libc6 (>= 2.34)
Recommends: va-driver-all | va-driver
Description: Video Acceleration (VA) API for Linux -- runtime
 Video Acceleration API (VA API) is a library ("libVA") and API specification
 which enables and provides access to graphics hardware (GPU) acceleration for
 video processing on Linux and UNIX based operating systems. Accelerated
 processing includes video decoding, video encoding, subpicture blending and
 rendering. The specification was originally designed by Intel for its GMA
 (Graphics Media Accelerator) series of GPU hardware, the API is however not
 limited to GPUs or Intel specific hardware, as other hardware and manufacturers
 can also freely use this API for hardware accelerated video decoding.
 .
 This package provides the main libva library.
Homepage: https://01.org/linuxmedia/vaapi

Package: libvdpau-va-gl1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 254
Maintainer: Vincent Bernat <bernat@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libvdpau-va-gl (0.4.2-1)
Version: 0.4.2-1+b1
Provides: vdpau-driver
Depends: libc6 (>= 2.14), libgcc1 (>= 1:3.0), libgl1, libstdc++6 (>= 6), libva-x11-2 (>= 1.0.3), libva2 (>= 1.7.3), libx11-6, libxext6, libvdpau1
Enhances: libvdpau1
Conffiles:
 /etc/X11/Xsession.d/20vdpau-va-gl 2048b94e02fb348cbedd187dfad63fbe
Description: VDPAU driver with OpenGL/VAAPI backend
 Many applications can use VDPAU to accelerate portions of the video
 decoding process and video post-processing to the GPU video
 hardware. Unfortunately, there is no such library for many graphic
 chipsets. Some applications also support VA-API but many of them,
 including Adobe Flash Player, don't.
 .
 This library proposes a generic VDPAU library. It uses OpenGL under
 the hood to accelerate drawing and scaling and VA-API (if available)
 to accelerate video decoding.
Homepage: https://github.com/i-rinat/libvdpau-va-gl

Package: libvdpau1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 106
Maintainer: Debian NVIDIA Maintainers <pkg-nvidia-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libvdpau
Version: 1.5-2
Depends: libc6 (>= 2.34), libx11-6 (>= 2:1.4.99.1), libxext6
Recommends: vdpau-driver-all | vdpau-driver
Conffiles:
 /etc/vdpau_wrapper.cfg bc89239208609c5d031b74c99a45747d
Description: Video Decode and Presentation API for Unix (libraries)
 VDPAU (Video Decode and Presentation API for Unix) is an open source
 library (libvdpau) and API designed by NVIDIA originally for its GeForce
 8 series and later GPU hardware, targeted at the X Window System on Unix
 operating-systems (including Linux, FreeBSD, and Solaris). This VDPAU API
 allows video programs to offload portions of the video decoding process
 and video post-processing to the GPU video-hardware.
 .
 This package contains the VDPAU wrapper and trace libraries.
Homepage: https://www.freedesktop.org/wiki/Software/VDPAU/

Package: libvidstab1.1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 99
Maintainer: Keng-Yu Lin <kengyu@lexical.tw>
Architecture: amd64
Multi-Arch: same
Source: libvidstab (1.1.0-2)
Version: 1.1.0-2+b1
Depends: libc6 (>= 2.15), libgomp1 (>= 4.9)
Description: video stabilization library (shared library)
 Imagine you captured a nice video with your camcorder, compact camera or
 even cell phone while skiing, cycling or whatever sports and the video is
 basically just jiggled.
 .
 Modern cameras come along with hardware stabilisation, however this does
 not work if you have really strong vibrations - rather the contrary -
 sometimes this mechanism starts to oscillate.
 .
 Vid.Stab is your friend in this matter. It is designed to stabilize even
 strongly jiggled clips.
 .
 This package contains the shared library.
Homepage: http://public.hronopik.de/vid.stab/

Package: libvorbis0a
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 205
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libvorbis
Version: 1.3.7-1
Depends: libc6 (>= 2.29), libogg0 (>= 1.1.0)
Description: decoder library for Vorbis General Audio Compression Codec
 Ogg Vorbis is a fully open, non-proprietary, patent-and-royalty-free,
 general-purpose compressed audio format for audio and music at fixed
 and variable bitrates from 16 to 128 kbps/channel.
 .
 The Vorbis library is the primary Ogg Vorbis library.
Homepage: https://www.xiph.org/vorbis/

Package: libvorbisenc2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 703
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libvorbis
Version: 1.3.7-1
Depends: libc6 (>= 2.4), libvorbis0a (= 1.3.7-1)
Description: encoder library for Vorbis General Audio Compression Codec
 Ogg Vorbis is a fully open, non-proprietary, patent-and-royalty-free,
 general-purpose compressed audio format for audio and music at fixed
 and variable bitrates from 16 to 128 kbps/channel.
 .
 The Vorbisenc library provides a convenient API for setting up an encoding
 environment using libvorbis.
Homepage: https://www.xiph.org/vorbis/

Package: libvorbisfile3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 63
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libvorbis
Version: 1.3.7-1
Depends: libc6 (>= 2.14), libogg0 (>= 1.1.0), libvorbis0a (= 1.3.7-1)
Description: high-level API for Vorbis General Audio Compression Codec
 Ogg Vorbis is a fully open, non-proprietary, patent-and-royalty-free,
 general-purpose compressed audio format for audio and music at fixed
 and variable bitrates from 16 to 128 kbps/channel.
 .
 The Vorbisfile library provides a convenient high-level API for decoding
 and basic manipulation of all Vorbis-I audio streams.
Homepage: https://www.xiph.org/vorbis/

Package: libvpx7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3061
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libvpx
Version: 1.12.0-1+deb12u5
Depends: libc6 (>= 2.34)
Description: VP8 and VP9 video codec (shared library)
 VP8 and VP9 are open video codecs, originally developed by On2 and released
 as open source by Google Inc. They are the successor of the VP3 codec,
 on which the Theora codec was based.
 .
 This package contains the shared libraries.
Homepage: https://www.webmproject.org

Package: libvulkan1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 477
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: vulkan-loader
Version: 1.3.239.0-1
Replaces: libvulkan-dev (<< 1.1.70+dfsg1-2), vulkan-loader
Depends: libc6 (>= 2.34)
Recommends: mesa-vulkan-drivers | vulkan-icd
Breaks: libvulkan-dev (<< 1.1.70+dfsg1-2), vulkan-loader
Description: Vulkan loader library
 The Loader implements the main VK library. It handles layer management and
 driver management. The loader fully supports multi-gpu operation. As part of
 this, it dispatches API calls to the correct driver, and to the correct
 layers, based on the GPU object selected by the application.
 .
 This package includes the loader library.
Homepage: https://github.com/KhronosGroup/Vulkan-Loader

Package: libwayland-client0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 89
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: wayland
Version: 1.21.0-1
Replaces: libwayland0 (<< 1.1.0-1)
Depends: libc6 (>= 2.28), libffi8 (>= 3.4)
Conflicts: libwayland0 (<< 1.1.0-1)
Description: wayland compositor infrastructure - client library
 Wayland is a protocol for a compositor to talk to its clients as well
 as a C library implementation of that protocol. The compositor can be
 a standalone display server running on Linux kernel modesetting and
 evdev input devices, an X application, or a wayland client
 itself. The clients can be traditional applications, X servers
 (rootless or fullscreen) or other display servers.
 .
 This package ships the library that implements the client side of
 the Wayland protocol.
Homepage: https://wayland.freedesktop.org/

Package: libwayland-cursor0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 54
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: wayland
Version: 1.21.0-1
Replaces: libwayland0 (<< 1.1.0-1)
Depends: libc6 (>= 2.28), libwayland-client0 (>= 1.20.0)
Conflicts: libwayland0 (<< 1.1.0-1)
Description: wayland compositor infrastructure - cursor library
 Wayland is a protocol for a compositor to talk to its clients as well
 as a C library implementation of that protocol. The compositor can be
 a standalone display server running on Linux kernel modesetting and
 evdev input devices, an X application, or a wayland client
 itself. The clients can be traditional applications, X servers
 (rootless or fullscreen) or other display servers.
 .
 This package ships a helper library to manage cursors.
Homepage: https://wayland.freedesktop.org/

Package: libwayland-egl1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 33
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: wayland
Version: 1.21.0-1
Replaces: libwayland-egl1-mesa (<< 18.0.5-0)
Provides: libwayland-egl1-mesa
Depends: libc6 (>= 2.2.5)
Breaks: libwayland-egl1-mesa (<< 18.0.5-0)
Description: wayland compositor infrastructure - EGL library
 Wayland is a protocol for a compositor to talk to its clients as well
 as a C library implementation of that protocol. The compositor can be
 a standalone display server running on Linux kernel modesetting and
 evdev input devices, an X application, or a wayland client
 itself. The clients can be traditional applications, X servers
 (rootless or fullscreen) or other display servers.
 .
 This package ships the library that implements the Wayland EGL platform
 of the Wayland protocol.
Homepage: https://wayland.freedesktop.org/

Package: libwayland-server0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 111
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: wayland
Version: 1.21.0-1
Replaces: libwayland0 (<< 1.1.0-1)
Depends: libc6 (>= 2.33), libffi8 (>= 3.4)
Breaks: weston (<< 1.2.0)
Conflicts: libwayland0 (<< 1.1.0-1)
Description: wayland compositor infrastructure - server library
 Wayland is a protocol for a compositor to talk to its clients as well
 as a C library implementation of that protocol. The compositor can be
 a standalone display server running on Linux kernel modesetting and
 evdev input devices, an X application, or a wayland client
 itself. The clients can be traditional applications, X servers
 (rootless or fullscreen) or other display servers.
 .
 This package ships the library that implements the server side of
 the Wayland protocol.
Homepage: https://wayland.freedesktop.org/

Package: libwebp-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1084
Maintainer: Jeff Breidenbach <jab@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libwebp
Version: 1.2.4-0.2+deb12u1
Depends: libwebp7 (= 1.2.4-0.2+deb12u1), libwebpmux3 (= 1.2.4-0.2+deb12u1), libwebpdemux2 (= 1.2.4-0.2+deb12u1)
Description: Lossy compression of digital photographic images
 Image Compression format, based on the VP8 codec.
 WebP uses the modern VP8 compression format to deliver efficient
 compression of images for the web. More than 30% extra gain over
 optimized JPEG, for same quality, is not unusual.
Homepage: https://developers.google.com/speed/webp/

Package: libwebp7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 544
Maintainer: Jeff Breidenbach <jab@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libwebp
Version: 1.2.4-0.2+deb12u1
Depends: libc6 (>= 2.34)
Description: Lossy compression of digital photographic images
 Image Compression format, based on the VP8 codec.
 WebP uses the modern VP8 compression format to deliver efficient
 compression of images for the web. More than 30% extra gain over
 optimized JPEG, for same quality, is not unusual.
Homepage: https://developers.google.com/speed/webp/

Package: libwebpdemux2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 120
Maintainer: Jeff Breidenbach <jab@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libwebp
Version: 1.2.4-0.2+deb12u1
Depends: libc6 (>= 2.14), libwebp7 (>= 1.2.4)
Description: Lossy compression of digital photographic images.
 Image Compression format, based on the VP8 codec.
 WebP uses the modern VP8 compression format to deliver efficient
 compression of images for the web. More than 30% extra gain over
 optimized JPEG, for same quality, is not unusual.
Homepage: https://developers.google.com/speed/webp/

Package: libwebpmux3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 144
Maintainer: Jeff Breidenbach <jab@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libwebp
Version: 1.2.4-0.2+deb12u1
Depends: libc6 (>= 2.29), libwebp7 (>= 1.2.4)
Description: Lossy compression of digital photographic images
 Image Compression format, based on the VP8 codec.
 WebP uses the modern VP8 compression format to deliver efficient
 compression of images for the web. More than 30% extra gain over
 optimized JPEG, for same quality, is not unusual.
Homepage: https://developers.google.com/speed/webp/

Package: libwmflite-0.2-7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 201
Maintainer: Yangfl <mmyangfl@gmail.com>
Architecture: amd64
Multi-Arch: same
Source: libwmf
Version: 0.2.12-5.1
Replaces: libwmf0.2-7 (<< 0.2.12-1)
Depends: libc6 (>= 2.14)
Breaks: libwmf0.2-7 (<< 0.2.12-1)
Description: Windows metafile conversion lite library
 Windows metafile (WMF) is a picture format used by many Windows
 programs, e.g. Microsoft Word.  libwmf is a library for interpreting
 metafile images and either displaying them using X or converting them
 to standard formats such as PNG, JPEG, PS, EPS and SVG(Z)...
 .
 This package contains the lite library.
Homepage: http://wvware.sourceforge.net/libwmf.html

Package: libwrap0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 110
Maintainer: Marco d'Itri <md@linux.it>
Architecture: amd64
Multi-Arch: same
Source: tcp-wrappers
Version: 7.6.q-32
Depends: libc6 (>= 2.33), libnsl2 (>= 1.0)
Description: Wietse Venema's TCP wrappers library
 Wietse Venema's network logger, also known as TCPD or LOG_TCP.
 .
 These programs log the client host name of incoming telnet,
 ftp, rsh, rlogin, finger etc. requests.
 .
 Security options are:
  - access control per host, domain and/or service;
  - detection of host name spoofing or host address spoofing;
  - booby traps to implement an early-warning system.

Package: libx11-6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1562
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libx11
Version: 2:1.8.4-2+deb12u2
Depends: libc6 (>= 2.34), libxcb1 (>= 1.11.1), libx11-data
Breaks: libx11-xcb1 (<< 2:1.7.0-2)
Description: X11 client-side library
 This package provides a client interface to the X Window System, otherwise
 known as 'Xlib'.  It provides a complete API for the basic functions of the
 window system.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 https://gitlab.freedesktop.org/xorg/lib/libX11

Package: libx11-data
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 1577
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: libx11
Version: 2:1.8.4-2+deb12u2
Description: X11 client-side library
 This package provides the locale data files for libx11.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 https://gitlab.freedesktop.org/xorg/lib/libX11

Package: libx11-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 2600
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libx11
Version: 2:1.8.4-2+deb12u2
Replaces: x11proto-dev (<< 2019.2)
Depends: libx11-6 (= 2:1.8.4-2+deb12u2), libxau-dev, libxdmcp-dev, x11proto-dev (>= 2019.2-1), xtrans-dev, libxcb1-dev
Suggests: libx11-doc
Description: X11 client-side library (development headers)
 This package provides a client interface to the X Window System, otherwise
 known as 'Xlib'.  It provides a complete API for the basic functions of the
 window system.
 .
 This package contains the development headers for the library found in
 libx11-6. Non-developers likely have little use for this package.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 https://gitlab.freedesktop.org/xorg/lib/libX11

Package: libx11-xcb1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 252
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libx11
Version: 2:1.8.4-2+deb12u2
Depends: libx11-6 (= 2:1.8.4-2+deb12u2)
Description: Xlib/XCB interface library
 libX11-xcb provides functions needed by clients which take advantage of
 Xlib/XCB to mix calls to both Xlib and XCB over the same X connection.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 More information about XCB can be found at:
 <URL:https://xcb.freedesktop.org>
 .
 This module can be found at
 https://gitlab.freedesktop.org/xorg/lib/libX11

Package: libx264-164
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1877
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: x264
Version: 2:0.164.3095+gitbaee400-3
Depends: libc6 (>= 2.34)
Description: x264 video coding library
 libx264 is an advanced encoding library for creating H.264 (MPEG-4 AVC)
 video streams.
 .
 This package contains the libx264 shared library.
Homepage: https://www.videolan.org/developers/x264.html

Package: libx265-199
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 16203
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: x265 (3.5-2)
Version: 3.5-2+b1
Depends: libc6 (>= 2.34), libnuma1 (>= 2.0.11), libstdc++6 (>= 4.1.1)
Description: H.265/HEVC video stream encoder (shared library)
 libx265 is an encoding library for creating H.265/High Efficiency Video Coding
 (HEVC) video streams.
 .
 This package contains the shared library.
Homepage: http://x265.org

Package: libx265-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 21576
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: x265 (3.5-2)
Version: 3.5-2+b1
Depends: libx265-199 (= 3.5-2+b1)
Suggests: libx265-doc
Description: H.265/HEVC video stream encoder (development files)
 libx265 is an encoding library for creating H.265/High Efficiency Video Coding
 (HEVC) video streams.
 .
 This is the development package which contains headers and libraries for
 libx265.
Homepage: http://x265.org

Package: libxau-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 65
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxau
Version: 1:1.0.9-1
Depends: libxau6 (= 1:1.0.9-1), x11proto-dev
Description: X11 authorisation library (development headers)
 This package provides the main interface to the X11 authorisation handling,
 which controls authorisation for X connections, both client-side and
 server-side.
 .
 This package contains the development headers for the library found in libxau6.
 Non-developers likely have little use for this package.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 https://gitlab.freedesktop.org/xorg/lib/libxau

Package: libxau6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 42
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxau
Version: 1:1.0.9-1
Depends: libc6 (>= 2.4)
Description: X11 authorisation library
 This package provides the main interface to the X11 authorisation handling,
 which controls authorisation for X connections, both client-side and
 server-side.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 https://gitlab.freedesktop.org/xorg/lib/libxau

Package: libxcb-dri2-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 136
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.15-1
Depends: libc6 (>= 2.4), libxcb1
Description: X C Binding, dri2 extension
 This package contains the library files needed to run software using
 libxcb-dri2, the dri2 extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org

Package: libxcb-dri3-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 136
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.15-1
Depends: libc6 (>= 2.4), libxcb1 (>= 1.12)
Description: X C Binding, dri3 extension
 This package contains the library files needed to run software using
 libxcb-dri3, the dri3 extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org

Package: libxcb-glx0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 244
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.15-1
Depends: libc6 (>= 2.4), libxcb1
Description: X C Binding, glx extension
 This package contains the library files needed to run software using
 libxcb-glx, the glx extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org

Package: libxcb-present0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 126
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.15-1
Depends: libc6 (>= 2.4), libxcb1
Description: X C Binding, present extension
 This package contains the library files needed to run software using
 libxcb-present, the present extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org

Package: libxcb-randr0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 192
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.15-1
Depends: libc6 (>= 2.4), libxcb1 (>= 1.9.2)
Description: X C Binding, randr extension
 This package contains the library files needed to run software using
 libxcb-randr, the randr extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org

Package: libxcb-render0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 176
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.15-1
Depends: libc6 (>= 2.14), libxcb1 (>= 1.8)
Description: X C Binding, render extension
 This package contains the library files needed to run software using
 libxcb-render, the render extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org

Package: libxcb-shape0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 127
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.15-1
Depends: libc6 (>= 2.4), libxcb1
Description: X C Binding, shape extension
 This package contains the library files needed to run software using
 libxcb-shape, the shape extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org

Package: libxcb-shm0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 126
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.15-1
Depends: libc6 (>= 2.4), libxcb1 (>= 1.12)
Description: X C Binding, shm extension
 This package contains the library files needed to run software using
 libxcb-shm, the shm extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org

Package: libxcb-sync1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 145
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.15-1
Depends: libc6 (>= 2.14), libxcb1
Description: X C Binding, sync extension
 This package contains the library files needed to run software using
 libxcb-sync, the sync extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org

Package: libxcb-xfixes0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 151
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.15-1
Depends: libc6 (>= 2.4), libxcb1
Description: X C Binding, xfixes extension
 This package contains the library files needed to run software using
 libxcb-xfixes, the xfixes extension for the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org

Package: libxcb1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 296
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.15-1
Depends: libc6 (>= 2.14), libxau6 (>= 1:1.0.9), libxdmcp6
Breaks: alsa-utils (<< 1.0.24.2-5)
Description: X C Binding
 This package contains the library files needed to run software using libxcb,
 the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org

Package: libxcb1-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 771
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxcb
Version: 1.15-1
Depends: libxcb1 (= 1.15-1), libpthread-stubs0-dev, libxau-dev (>= 1:1.0.0-1), libxdmcp-dev (>= 1:1.0.0-1)
Suggests: libxcb-doc
Description: X C Binding, development files
 This package contains the header and library files needed to build software
 using libxcb, the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: https://xcb.freedesktop.org

Package: libxcursor1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 83
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxcursor
Version: 1:1.2.1-1
Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.4.99.1), libxfixes3, libxrender1
Description: X cursor management library
 Xcursor is a simple library designed to help locate and load cursors for the
 X Window System.  Cursors can be loaded from files or memory and can exist in
 several sizes; the library automatically picks the best size.  When using
 images loaded from files, Xcursor prefers to use the Render extension's
 CreateCursor request for rendering cursors.  Where the Render extension is
 not supported, Xcursor maps the cursor image to a standard X cursor and uses
 the core X protocol CreateCursor request.
 .
 Preferred themes for cursors can be installed if desired, via
 xcursor-themes or other cursor-theme or icon-theme packages,
 configured with update-alternatives --config x-cursor-theme.
Homepage: https://www.x.org

Package: libxdmcp-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 81
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxdmcp
Version: 1:1.1.2-3
Depends: libxdmcp6 (= 1:1.1.2-3), x11proto-core-dev
Description: X11 authorisation library (development headers)
 This package provides the main interface to the X11 display manager control
 protocol library, which allows for remote logins to display managers.
 .
 This package contains the development headers for the library found in
 libxdmcp6. Non-developers likely have little use for this package.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXdmcp

Package: libxdmcp6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 53
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxdmcp
Version: 1:1.1.2-3
Depends: libbsd0 (>= 0.2.0), libc6 (>= 2.4)
Description: X11 Display Manager Control Protocol library
 This package provides the main interface to the X11 display manager control
 protocol library, which allows for remote logins to display managers.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXdmcp

Package: libxext-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 330
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxext (2:1.3.4-1)
Version: 2:1.3.4-1+b1
Depends: libxext6 (= 2:1.3.4-1+b1), x11proto-dev, libx11-dev
Suggests: libxext-doc
Description: X11 miscellaneous extensions library (development headers)
 libXext provides an X Window System client interface to several extensions to
 the X protocol.
 .
 The supported protocol extensions are:
  - DOUBLE-BUFFER (DBE), the Double Buffer extension;
  - DPMS, the VESA Display Power Management System extension;
  - Extended-Visual-Information (EVI), an extension for gathering extra
    information about the X server's visuals;
  - LBX, the Low Bandwidth X extension;
  - MIT-SHM, the MIT X client/server shared memory extension;
  - MIT-SUNDRY-NONSTANDARD, a miscellaneous extension by MIT;
  - Multi-Buffering, the multi-buffering and stereo display extension;
  - SECURITY, the X security extension;
  - SHAPE, the non-rectangular shaped window extension;
  - SYNC, the X synchronization extension;
  - TOG-CUP, the Open Group's Colormap Utilization extension;
  - XC-APPGROUP, the X Consortium's Application Group extension;
  - XC-MISC, the X Consortium's resource ID querying extension;
  - XTEST, the X test extension (this is one of two client-side
    implementations; the other is in the libXtst library, provided by the
    libxtst6 package);
 .
 libXext also provides a small set of utility functions to aid authors of
 client APIs for X protocol extensions.
 .
 This package contains the development headers for the library found in
 libxext6. Non-developers likely have little use for this package.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXext

Package: libxext6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 132
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxext (2:1.3.4-1)
Version: 2:1.3.4-1+b1
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0)
Description: X11 miscellaneous extension library
 libXext provides an X Window System client interface to several extensions to
 the X protocol.
 .
 The supported protocol extensions are:
  - DOUBLE-BUFFER (DBE), the Double Buffer extension;
  - DPMS, the VESA Display Power Management System extension;
  - Extended-Visual-Information (EVI), an extension for gathering extra
    information about the X server's visuals;
  - LBX, the Low Bandwidth X extension;
  - MIT-SHM, the MIT X client/server shared memory extension;
  - MIT-SUNDRY-NONSTANDARD, a miscellaneous extension by MIT;
  - Multi-Buffering, the multi-buffering and stereo display extension;
  - SECURITY, the X security extension;
  - SHAPE, the non-rectangular shaped window extension;
  - SYNC, the X synchronization extension;
  - TOG-CUP, the Open Group's Colormap Utilization extension;
  - XC-APPGROUP, the X Consortium's Application Group extension;
  - XC-MISC, the X Consortium's resource ID querying extension;
  - XTEST, the X test extension (this is one of two client-side
    implementations; the other is in the libXtst library, provided by the
    libxtst6 package);
 .
 libXext also provides a small set of utility functions to aid authors of
 client APIs for X protocol extensions.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXext

Package: libxfixes3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 57
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxfixes
Version: 1:6.0.0-2
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0)
Description: X11 miscellaneous 'fixes' extension library
 libXfixes provides an X Window System client interface to the 'XFIXES'
 extension to the X protocol.
 .
 It provides support for Region types, and some cursor functions.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXfixes

Package: libxi6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 149
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxi (2:1.8-1)
Version: 2:1.8-1+b1
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0), libxext6
Description: X11 Input extension library
 libXi provides an X Window System client interface to the XINPUT
 extension to the X protocol.
 .
 The Input extension allows setup and configuration of multiple input devices,
 and hotplugging of input devices (to be added and removed on the fly).
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXi
Homepage: https://www.x.org/

Package: libxkbcommon0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 296
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxkbcommon
Version: 1.5.0-1
Depends: xkb-data, libc6 (>= 2.33)
Description: library interface to the XKB compiler - shared library
 This package provides a library to handle keyboard descriptions, including
 loading them from disk, parsing them and handling their state. It's mainly
 meant for client toolkits, window systems, and other system applications;
 currently that includes Wayland, kmscon, GTK+, Clutter, and more.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 https://github.com/xkbcommon/libxkbcommon.git
Homepage: http://www.xkbcommon.org/

Package: libxml2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1867
Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Version: 2.9.14+dfsg-1.3~deb12u6
Depends: libc6 (>= 2.34), libicu72 (>= 72.1~rc-1~), liblzma5 (>= 5.1.1alpha+20120614), zlib1g (>= 1:1.2.3.3)
Conflicts: w3c-dtd-xhtml
Description: GNOME XML library
 XML is a metalanguage to let you design your own markup language.
 A regular markup language defines a way to describe information in
 a certain class of documents (eg HTML). XML lets you define your
 own customized markup languages for many classes of document. It
 can do this because it's written in SGML, the international standard
 metalanguage for markup languages.
 .
 This package provides a library providing an extensive API to handle
 such XML data files.
Homepage: http://xmlsoft.org

Package: libxml2-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 3286
Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxml2
Version: 2.9.14+dfsg-1.3~deb12u6
Depends: libicu-dev, libxml2 (= 2.9.14+dfsg-1.3~deb12u6)
Suggests: pkg-config
Description: GNOME XML library - development files
 XML is a metalanguage to let you design your own markup language.
 A regular markup language defines a way to describe information in
 a certain class of documents (eg HTML). XML lets you define your
 own customized markup languages for many classes of document. It
 can do this because it's written in SGML, the international standard
 metalanguage for markup languages.
 .
 Install this package if you wish to develop your own programs using
 the GNOME XML library.
Homepage: http://xmlsoft.org

Package: libxpm4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 111
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxpm
Version: 1:3.5.12-1.1+deb12u1
Depends: libc6 (>= 2.34), libx11-6
Description: X11 pixmap library
 The X PixMap image format is an extension of the monochrome X BitMap
 format specified in the X protocol, and is commonly used in traditional
 X applications.
 .
 This package provides runtime support for XPM format.
Homepage: https://www.x.org

Package: libxrandr2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 88
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxrandr (2:1.5.2-2)
Version: 2:1.5.2-2+b1
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0), libxext6, libxrender1
Description: X11 RandR extension library
 libXrandr provides an X Window System client interface to the RandR
 extension to the X protocol.
 .
 The RandR extension allows for run-time configuration of display attributes
 such as resolution, rotation, and reflection.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 https://gitlab.freedesktop.org/xorg/lib/libXrandr

Package: libxrender1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 78
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxrender
Version: 1:0.9.10-1.1
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0)
Description: X Rendering Extension client library
 The X Rendering Extension (Render) introduces digital image composition as
 the foundation of a new rendering model within the X Window System.
 Rendering geometric figures is accomplished by client-side tessellation into
 either triangles or trapezoids.  Text is drawn by loading glyphs into the
 server and rendering sets of them.  The Xrender library exposes this
 extension to X clients.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXrender

Package: libxshmfence1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 26
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxshmfence
Version: 1.3-1
Depends: libc6 (>= 2.27)
Description: X shared memory fences - shared library
 This library provides an interface to shared-memory fences for
 synchronization between the X server and direct-rendering clients.
 .
 This package contains the xshmfence shared library.

Package: libxslt1.1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 493
Maintainer: Debian XML/SGML Group <debian-xml-sgml-pkgs@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxslt
Version: 1.1.35-1+deb12u4
Depends: libc6 (>= 2.33), libgcrypt20 (>= 1.10.0), libxml2 (>= 2.9.0)
Description: XSLT 1.0 processing library - runtime library
 XSLT is an XML language for defining transformations of XML files from
 XML to some other arbitrary format, such as XML, HTML, plain text, etc.
 using standard XSLT stylesheets. libxslt is a C library which
 implements XSLT version 1.0.
 .
 This package contains the libxslt library used by applications for XSLT
 transformations.
Homepage: https://gitlab.gnome.org/GNOME/libxslt/-/wikis/home

Package: libxss1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 42
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxss
Version: 1:1.2.3-1
Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.4.99.1), libxext6, x11-common
Description: X11 Screen Saver extension library
 libXss provides an X Window System client interface to the MIT-SCREEN-SAVER
 extension to the X protocol.
 .
 The Screen Saver extension allows clients behaving as screen savers to
 register themselves with the X server, to better integrate themselves with
 the running session.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 https://gitlab.freedesktop.org/xorg/lib/libXScrnSaver

Package: libxt-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1384
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxt
Version: 1:1.2.1-1.1
Depends: libxt6 (= 1:1.2.1-1.1), libx11-dev, x11proto-dev, libsm-dev
Suggests: libxt-doc
Description: X11 toolkit intrinsics library (development headers)
 libXt provides the X Toolkit Intrinsics, an abstract widget library upon
 which other toolkits are based.  Xt is the basis for many toolkits, including
 the Athena widgets (Xaw), and LessTif (a Motif implementation).
 .
 This package contains the development headers for the library found in
 libxt6.  Non-developers likely have little use for this package.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXt

Package: libxt6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 478
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxt
Version: 1:1.2.1-1.1
Depends: libc6 (>= 2.33), libice6 (>= 1:1.0.0), libsm6, libx11-6
Description: X11 toolkit intrinsics library
 libXt provides the X Toolkit Intrinsics, an abstract widget library upon
 which other toolkits are based.  Xt is the basis for many toolkits, including
 the Athena widgets (Xaw), and LessTif (a Motif implementation).
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXt

Package: libxtables12
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 101
Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: iptables
Version: 1.8.9-2
Replaces: libxtables11 (>= 1.6.0+snapshot20161117-1)
Depends: libc6 (>= 2.34)
Breaks: libxtables11 (>= 1.6.0+snapshot20161117-1)
Description: netfilter xtables library
 The iptables/xtables framework has been replaced by nftables. You should
 consider migrating now.
 .
 However, even if a given system may be fully running on native nftables,
 there are other reasons why libxtables might be installed. For one, nftables
 itself uses it to be able to display old rulesets that were created using
 xtables extensions (to help folks migrate). Other third-party software might
 also be linked to this library.
 .
 This library being installed in the system should be harmless in any case.
 .
 This package contains the user-space interface to the Netfilter xtables
 kernel framework.
Homepage: https://www.netfilter.org/

Package: libxv1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 53
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxv
Version: 2:1.0.11-1.1
Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0), libxext6
Description: X11 Video extension library
 libXv provides an X Window System client interface to the XVideo
 extension to the X protocol.
 .
 The XVideo extension allows for accelerated drawing of videos.  Hardware
 adaptors are exposed to clients, which may draw in a number of colourspaces,
 including YUV.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXv

Package: libxvidcore4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 734
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: xvidcore
Version: 2:1.3.7-1
Depends: libc6 (>= 2.29)
Description: Open source MPEG-4 video codec (library)
 Xvid (formerly XviD) is an open source MPEG-4 video codec, implementing MPEG-4
 Simple Profile, Advanced Simple Profile, and Advanced Video Coding standards.
 It is written in C with assembler optimizations for quality and speed
 (including MMX, SSE, and 3Dnow! code for i386 and AltiVec for PowerPC), and is
 especially optimized towards offline, multi-pass compression for storage and
 archival purposes.
 .
 This package contains the shared library.
Homepage: https://labs.xvid.com/source/

Package: libxxf86vm1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 50
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libxxf86vm (1:1.1.4-1)
Version: 1:1.1.4-1+b2
Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.6.0), libxext6
Description: X11 XFree86 video mode extension library
 libXxf86vm provides an interface to the XFree86-VidModeExtension
 extension, which allows client applications to get and set video mode
 timings in extensive detail.  It is used by the xvidtune program in
 particular.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXxf86vm

Package: libxxhash0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 99
Maintainer: Josue Ortega <josue@debian.org>
Architecture: amd64
Multi-Arch: same
Source: xxhash
Version: 0.8.1-1
Depends: libc6 (>= 2.14)
Description: shared library for xxhash
 xxHash is an Extremely fast Hash algorithm, running at RAM speed limits.
 It successfully completes the SMHasher test suite which evaluates collision,
 dispersion and randomness qualities of hash functions. Code is highly portable,
 and hashes are identical on all platforms (little / big endian).
 .
 This package contains the shared library.
Homepage: https://cyan4973.github.io/xxHash

Package: libyaml-0-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 152
Maintainer: Florian Ernst <florian@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libyaml
Version: 0.2.5-1
Depends: libc6 (>= 2.14)
Description: Fast YAML 1.1 parser and emitter library
 LibYAML is a C library for parsing and emitting data in YAML 1.1, a
 human-readable data serialization format.
Homepage: https://github.com/yaml/libyaml

Package: libyuv0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 671
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libyuv
Version: 0.0~git20230123.b2528b0-1
Replaces: libyuv
Provides: libyuv
Depends: libc6 (>= 2.14), libgcc-s1 (>= 3.0), libjpeg62-turbo (>= 1.3.1), libstdc++6 (>= 5)
Conflicts: libyuv
Description: Library for YUV scaling (shared library)
 libyuv is an open source project that includes YUV scaling and
 conversion functionality.
 .
 This package provides the shared library.
Homepage: https://chromium.googlesource.com/libyuv/libyuv/

Package: libz3-4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 22767
Maintainer: LLVM Packaging Team <pkg-llvm-team@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: z3
Version: 4.8.12-3.1
Replaces: libz3-dev (<< 4.4.1)
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.4), libstdc++6 (>= 12)
Breaks: libz3-dev (<< 4.4.1)
Description: theorem prover from Microsoft Research - runtime libraries
 Z3 is a state-of-the-art theorem prover from Microsoft Research. It can be
 used to check the satisfiability of logical formulas over one or more
 theories. Z3 offers a compelling match for software analysis and verification
 tools, since several common software constructs map directly into supported
 theories.
 .
 This package contains runtime libraries. You shouldn't have to install it
 manually.
Homepage: https://github.com/Z3Prover/z3

Package: libzfs4linux
Status: install ok installed
Priority: optional
Section: contrib/libs
Installed-Size: 651
Maintainer: Debian ZFS on Linux maintainers <pkg-zfsonlinux-devel@alioth-lists.debian.net>
Architecture: amd64
Source: zfs-linux
Version: 2.1.11-1+deb12u1
Replaces: libzfs2, libzfs4
Depends: libblkid1 (>= 2.16), libc6 (>= 2.34), libnvpair3linux (>= 0.8.2), libssl3 (>= 3.0.0), libudev1 (>= 183), libuuid1 (>= 2.16), libuutil3linux (>= 0.8.2), zlib1g (>= 1:1.1.4)
Recommends: libcurl4
Breaks: libzfs2, libzfs4
Description: OpenZFS filesystem library for Linux - general support
 OpenZFS is a storage platform that encompasses the functionality of
 traditional filesystems and volume managers. It supports data checksums,
 compression, encryption, snapshots, and more.
 .
 The OpenZFS library provides support for managing OpenZFS filesystems.
Homepage: https://zfsonlinux.org/

Package: libzimg2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 852
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: zimg
Version: 3.0.4+ds1-1
Depends: libc6 (>= 2.32), libgcc-s1 (>= 3.0), libstdc++6 (>= 11)
Description: scaling, colorspace, depth conversion library (shared library)
 The "z" library implements the commonly required image processing basics of
 scaling, colorspace conversion, and depth conversion. A simple API enables
 conversion between any supported formats to operate with minimal knowledge
 from the programmer.
 .
 This package constains the shared library.
Homepage: https://github.com/sekrit-twc/zimg

Package: libzip-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 324
Maintainer: Stefan Schörghofer <amd1212@4md.gr>
Architecture: amd64
Multi-Arch: same
Source: libzip (1.7.3-1)
Version: 1.7.3-1+b1
Depends: libzip4 (= 1.7.3-1+b1), zlib1g-dev
Description: library for reading, creating, and modifying zip archives (development)
 libzip is a C library for reading, creating, and modifying zip archives. Files
 can be added from data buffers, files, or compressed data copied directly from
 other zip archives. Changes made without closing the archive can be reverted.
 .
 This package contains the static libraries and headers for developing
 applications that use the libzip library API.
Homepage: https://libzip.org

Package: libzip4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 146
Maintainer: Stefan Schörghofer <amd1212@4md.gr>
Architecture: amd64
Multi-Arch: same
Source: libzip (1.7.3-1)
Version: 1.7.3-1+b1
Depends: libbz2-1.0, libc6 (>= 2.33), libssl3 (>= 3.0.0), zlib1g (>= 1:1.1.4)
Description: library for reading, creating, and modifying zip archives (runtime)
 libzip is a C library for reading, creating, and modifying zip archives. Files
 can be added from data buffers, files, or compressed data copied directly from
 other zip archives. Changes made without closing the archive can be reverted.
 .
 This package contains the files necessary for running applications that
 use the libzip library.
Homepage: https://libzip.org

Package: libzmq5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 808
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: zeromq3
Version: 4.3.4-6
Depends: libbsd0 (>= 0.0), libc6 (>= 2.34), libgcc-s1 (>= 3.0), libgssapi-krb5-2 (>= 1.17), libnorm1 (>= 1.5r6), libpgm-5.3-0 (>= 5.1.116~dfsg), libsodium23 (>= 1.0.3), libstdc++6 (>= 12)
Description: lightweight messaging kernel (shared library)
 ØMQ is a library which extends the standard socket interfaces with features
 traditionally provided by specialised messaging middleware products.
 .
 ØMQ sockets provide an abstraction of asynchronous message queues, multiple
 messaging patterns, message filtering (subscriptions), seamless access to
 multiple transport protocols and more.
 .
 This package contains the libzmq shared library.
Homepage: https://www.zeromq.org/

Package: libzpool5linux
Status: install ok installed
Priority: optional
Section: contrib/libs
Installed-Size: 4144
Maintainer: Debian ZFS on Linux maintainers <pkg-zfsonlinux-devel@alioth-lists.debian.net>
Architecture: amd64
Source: zfs-linux
Version: 2.1.11-1+deb12u1
Replaces: libzpool2, libzpool5
Depends: libc6 (>= 2.34), libnvpair3linux (>= 0.8.2), libzfs4linux (>= 2.0), zlib1g (>= 1:1.1.4)
Breaks: libzpool2, libzpool5
Description: OpenZFS pool library for Linux
 OpenZFS is a storage platform that encompasses the functionality of
 traditional filesystems and volume managers. It supports data checksums,
 compression, encryption, snapshots, and more.
 .
 This zpool library provides support for managing zpools.
Homepage: https://zfsonlinux.org/

Package: libzstd-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1224
Maintainer: RPM packaging team <team+pkg-rpm@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libzstd
Version: 1.5.4+dfsg2-5
Depends: libzstd1 (= 1.5.4+dfsg2-5)
Description: fast lossless compression algorithm -- development files
 Zstd, short for Zstandard, is a fast lossless compression algorithm, targeting
 real-time compression scenarios at zlib-level compression ratio.
 .
 This package contains the headers and static library.
Homepage: https://github.com/facebook/zstd

Package: libzstd1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 785
Maintainer: RPM packaging team <team+pkg-rpm@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libzstd
Version: 1.5.4+dfsg2-5
Depends: libc6 (>= 2.34)
Description: fast lossless compression algorithm
 Zstd, short for Zstandard, is a fast lossless compression algorithm, targeting
 real-time compression scenarios at zlib-level compression ratio.
 .
 This package contains the shared library.
Homepage: https://github.com/facebook/zstd

Package: libzvbi-common
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 191
Maintainer: Ileana Dumitrescu <ileanadumitrescu95@gmail.com>
Architecture: all
Multi-Arch: foreign
Source: zvbi
Version: 0.2.41-1+deb12u1
Replaces: libzvbi-0.1 (<= 0.2.1-3)
Description: Vertical Blanking Interval decoder (VBI) - common files
 The vertical blanking interval (VBI) is an interval in a television signal
 that temporarily suspends transmission of the signal for the electron gun
 to move back up to the first line of the television screen to trace the
 next screen field.
 .
 The vertical blanking interval can be used to carry data, since anything
 sent during the VBI would naturally not be displayed; various test signals,
 closed captioning, and other digital data can be sent during this time
 period. These include information like closed-caption data, Teletext
 (primarily in Europe), and now Intercast and the ATVEC Internet television
 encodings.
 .
 The Zapping VBI library, in short ZVBI, provides functions to capture and
 decode VBI data. It is written in plain ANSI C with few dependencies on
 other tools and libraries, licensed under GPL. Some features:
   * Captures raw VBI samples from V4L, V4L2 and FreeBSD BKTR devices, sliced
     VBI data from Linux DVB devices;
   * Implements a VBI Proxy to share one VBI device between multiple
     applications;
   * Has a robust and versatile bit slicer which handles a wide range of data
     services;
   * Functions to capture multiple data services at once, such as Closed
     Caption (both NTSC and PAL), Teletext, VPS, WSS, XDS;
   * Level 3.5 Teletext decoder with support for all Teletext character sets,
     graphics, 4096 colors, with built-in page cache including search
     functions;
   * Closed Caption decoder which supports roll-up, pop-up and paint-on style
     caption, color, expanded character set, text attributes and free text
     placement;
   * Renders Teletext and Caption pages, can export to HTML, PNG and other
     formats.
   * Can determine network names;
   * Can find Teletext subtitle and program pages;
   * Functions to extract data transmissions in Teletext streams (currently
     Page Format Clear and Independent Data Line Format A);
   * Can multiplex and demultiplex DVB VBI PES and TS streams.
 .
 This package contains internationalization files.
Homepage: https://github.com/zapping-vbi/zvbi

Package: libzvbi0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 727
Maintainer: Ileana Dumitrescu <ileanadumitrescu95@gmail.com>
Architecture: amd64
Multi-Arch: same
Source: zvbi
Version: 0.2.41-1+deb12u1
Replaces: libzvbi-0.1 (<= 0.2.1-3)
Depends: libc6 (>= 2.34), libpng16-16 (>= 1.6.2-1), libzvbi-common (= 0.2.41-1+deb12u1)
Description: Vertical Blanking Interval decoder (VBI) - runtime files
 The vertical blanking interval (VBI) is an interval in a television signal
 that temporarily suspends transmission of the signal for the electron gun
 to move back up to the first line of the television screen to trace the
 next screen field.
 .
 The vertical blanking interval can be used to carry data, since anything
 sent during the VBI would naturally not be displayed; various test signals,
 closed captioning, and other digital data can be sent during this time
 period. These include information like closed-caption data, Teletext
 (primarily in Europe), and now Intercast and the ATVEC Internet television
 encodings.
 .
 The Zapping VBI library, in short ZVBI, provides functions to capture and
 decode VBI data. It is written in plain ANSI C with few dependencies on
 other tools and libraries, licensed under GPL. Some features:
   * Captures raw VBI samples from V4L, V4L2 and FreeBSD BKTR devices, sliced
     VBI data from Linux DVB devices;
   * Implements a VBI Proxy to share one VBI device between multiple
     applications;
   * Has a robust and versatile bit slicer which handles a wide range of data
     services;
   * Functions to capture multiple data services at once, such as Closed
     Caption (both NTSC and PAL), Teletext, VPS, WSS, XDS;
   * Level 3.5 Teletext decoder with support for all Teletext character sets,
     graphics, 4096 colors, with built-in page cache including search
     functions;
   * Closed Caption decoder which supports roll-up, pop-up and paint-on style
     caption, color, expanded character set, text attributes and free text
     placement;
   * Renders Teletext and Caption pages, can export to HTML, PNG and other
     formats.
   * Can determine network names;
   * Can find Teletext subtitle and program pages;
   * Functions to extract data transmissions in Teletext streams (currently
     Page Format Clear and Independent Data Line Format A);
   * Can multiplex and demultiplex DVB VBI PES and TS streams.
Homepage: https://github.com/zapping-vbi/zvbi

Package: linux-base
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 76
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 4.12.1~deb12u1
Replaces: kernel-common (<= 13.018+nmu1)
Depends: debconf (>= 0.5) | debconf-2.0
Breaks: kernel-common (<= 13.018+nmu1), linux-perf (<< 5.16.2-1~exp1)
Description: Linux image base package
 This package contains files and support scripts for all Linux
 images.

Package: linux-compiler-gcc-12-x86
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 1196
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: linux
Version: 6.1.187-1
Depends: gcc-12
Description: Compiler for Linux on x86 (meta-package)
 This package depends on GCC of the appropriate version and architecture
 for Linux on amd64, i386 and x32.
Homepage: https://www.kernel.org/

Package: linux-headers-6.1.0-51-cloud-amd64
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 2642
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux
Version: 6.1.177-1
Depends: linux-headers-6.1.0-51-common (= 6.1.177-1), linux-kbuild-6.1 (>= 6.1.177-1), linux-compiler-gcc-12-x86
Description: Header files for Linux 6.1.0-51-cloud-amd64
 This package provides the architecture-specific kernel header files for
 Linux kernel 6.1.0-51-cloud-amd64, generally used for building out-of-tree
 kernel modules.  These files are going to be installed into
 /usr/src/linux-headers-6.1.0-51-cloud-amd64, and can be used for building
 modules that load into the kernel provided by the
 linux-image-6.1.0-51-cloud-amd64 package.
Homepage: https://www.kernel.org/

Package: linux-headers-6.1.0-51-common
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 56968
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: linux
Version: 6.1.177-1
Description: Common header files for Linux 6.1.0-51
 This package provides the common kernel header files for Linux kernel
 version 6.1.0-51, generally used for building out-of-tree kernel modules.
 To obtain a complete set of headers you also need to install the
 linux-headers-6.1.0-51-(flavour) package, matching the flavour of the
 kernel you intend the build for.
Homepage: https://www.kernel.org/

Package: linux-headers-6.1.0-52-cloud-amd64
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 2667
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux
Version: 6.1.180-1
Depends: linux-headers-6.1.0-52-common (= 6.1.180-1), linux-kbuild-6.1 (>= 6.1.180-1), linux-compiler-gcc-12-x86
Description: Header files for Linux 6.1.0-52-cloud-amd64
 This package provides the architecture-specific kernel header files for
 Linux kernel 6.1.0-52-cloud-amd64, generally used for building out-of-tree
 kernel modules.  These files are going to be installed into
 /usr/src/linux-headers-6.1.0-52-cloud-amd64, and can be used for building
 modules that load into the kernel provided by the
 linux-image-6.1.0-52-cloud-amd64 package.
Homepage: https://www.kernel.org/

Package: linux-headers-6.1.0-52-common
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 57004
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: linux
Version: 6.1.180-1
Description: Common header files for Linux 6.1.0-52
 This package provides the common kernel header files for Linux kernel
 version 6.1.0-52, generally used for building out-of-tree kernel modules.
 To obtain a complete set of headers you also need to install the
 linux-headers-6.1.0-52-(flavour) package, matching the flavour of the
 kernel you intend the build for.
Homepage: https://www.kernel.org/

Package: linux-headers-6.1.0-53-amd64
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 4050
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux
Version: 6.1.187-1
Depends: linux-headers-6.1.0-53-common (= 6.1.187-1), linux-kbuild-6.1 (>= 6.1.187-1), linux-compiler-gcc-12-x86
Description: Header files for Linux 6.1.0-53-amd64
 This package provides the architecture-specific kernel header files for
 Linux kernel 6.1.0-53-amd64, generally used for building out-of-tree
 kernel modules.  These files are going to be installed into
 /usr/src/linux-headers-6.1.0-53-amd64, and can be used for building
 modules that load into the kernel provided by the
 linux-image-6.1.0-53-amd64 package.
Homepage: https://www.kernel.org/

Package: linux-headers-6.1.0-53-common
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 57035
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: linux
Version: 6.1.187-1
Description: Common header files for Linux 6.1.0-53
 This package provides the common kernel header files for Linux kernel
 version 6.1.0-53, generally used for building out-of-tree kernel modules.
 To obtain a complete set of headers you also need to install the
 linux-headers-6.1.0-53-(flavour) package, matching the flavour of the
 kernel you intend the build for.
Homepage: https://www.kernel.org/

Package: linux-headers-amd64
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 13
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux-signed-amd64 (6.1.187+1)
Version: 6.1.187-1
Provides: linux-headers-generic
Depends: linux-headers-6.1.0-53-amd64 (= 6.1.187-1)
Description: Header files for Linux amd64 configuration (meta-package)
 This package depends on the architecture-specific header files for the
 latest Linux kernel amd64 configuration.
Built-Using: linux (= 6.1.187-1)
Homepage: https://www.kernel.org/

Package: linux-image-6.1.0-34-cloud-amd64
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 104546
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux-signed-amd64 (6.1.135+1)
Version: 6.1.135-1
Config-Version: 6.1.135-1
Replaces: linux-image-6.1.0-34-cloud-amd64-unsigned
Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool
Recommends: firmware-linux-free, apparmor
Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux
Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~)
Conflicts: linux-image-6.1.0-34-cloud-amd64-unsigned
Description: Linux 6.1 for x86-64 cloud (signed)
 The Linux kernel 6.1 and modules for use on cloud platforms including
 Amazon EC2, Microsoft Azure, and Google Compute Engine.
 .
 The kernel image and modules are signed for use with Secure Boot.
Built-Using: linux (= 6.1.135-1)
Homepage: https://www.kernel.org/

Package: linux-image-6.1.0-41-cloud-amd64
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 104875
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux-signed-amd64 (6.1.158+1)
Version: 6.1.158-1
Config-Version: 6.1.158-1
Replaces: linux-image-6.1.0-41-cloud-amd64-unsigned
Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool
Recommends: firmware-linux-free, apparmor
Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux
Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~)
Conflicts: linux-image-6.1.0-41-cloud-amd64-unsigned
Description: Linux 6.1 for x86-64 cloud (signed)
 The Linux kernel 6.1 and modules for use on cloud platforms including
 Amazon EC2, Microsoft Azure, and Google Compute Engine.
 .
 The kernel image and modules are signed for use with Secure Boot.
Built-Using: linux (= 6.1.158-1)
Homepage: https://www.kernel.org/

Package: linux-image-6.1.0-42-cloud-amd64
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 104908
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux-signed-amd64 (6.1.159+1)
Version: 6.1.159-1
Config-Version: 6.1.159-1
Replaces: linux-image-6.1.0-42-cloud-amd64-unsigned
Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool
Recommends: firmware-linux-free, apparmor
Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux
Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~)
Conflicts: linux-image-6.1.0-42-cloud-amd64-unsigned
Description: Linux 6.1 for x86-64 cloud (signed)
 The Linux kernel 6.1 and modules for use on cloud platforms including
 Amazon EC2, Microsoft Azure, and Google Compute Engine.
 .
 The kernel image and modules are signed for use with Secure Boot.
Built-Using: linux (= 6.1.159-1)
Homepage: https://www.kernel.org/

Package: linux-image-6.1.0-43-cloud-amd64
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 104948
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux-signed-amd64 (6.1.162+1)
Version: 6.1.162-1
Config-Version: 6.1.162-1
Replaces: linux-image-6.1.0-43-cloud-amd64-unsigned
Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool
Recommends: firmware-linux-free, apparmor
Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux
Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~)
Conflicts: linux-image-6.1.0-43-cloud-amd64-unsigned
Description: Linux 6.1 for x86-64 cloud (signed)
 The Linux kernel 6.1 and modules for use on cloud platforms including
 Amazon EC2, Microsoft Azure, and Google Compute Engine.
 .
 The kernel image and modules are signed for use with Secure Boot.
Built-Using: linux (= 6.1.162-1)
Homepage: https://www.kernel.org/

Package: linux-image-6.1.0-44-cloud-amd64
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 104952
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux-signed-amd64 (6.1.164+1)
Version: 6.1.164-1
Config-Version: 6.1.164-1
Replaces: linux-image-6.1.0-44-cloud-amd64-unsigned
Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool
Recommends: firmware-linux-free, apparmor
Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux
Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~)
Conflicts: linux-image-6.1.0-44-cloud-amd64-unsigned
Description: Linux 6.1 for x86-64 cloud (signed)
 The Linux kernel 6.1 and modules for use on cloud platforms including
 Amazon EC2, Microsoft Azure, and Google Compute Engine.
 .
 The kernel image and modules are signed for use with Secure Boot.
Built-Using: linux (= 6.1.164-1)
Homepage: https://www.kernel.org/

Package: linux-image-6.1.0-45-cloud-amd64
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 105025
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux-signed-amd64 (6.1.170+1)
Version: 6.1.170-1
Config-Version: 6.1.170-1
Replaces: linux-image-6.1.0-45-cloud-amd64-unsigned
Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool
Recommends: firmware-linux-free, apparmor
Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux
Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~)
Conflicts: linux-image-6.1.0-45-cloud-amd64-unsigned
Description: Linux 6.1 for x86-64 cloud (signed)
 The Linux kernel 6.1 and modules for use on cloud platforms including
 Amazon EC2, Microsoft Azure, and Google Compute Engine.
 .
 The kernel image and modules are signed for use with Secure Boot.
Built-Using: linux (= 6.1.170-1)
Homepage: https://www.kernel.org/

Package: linux-image-6.1.0-47-cloud-amd64
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 105026
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux-signed-amd64 (6.1.170+3)
Version: 6.1.170-3
Config-Version: 6.1.170-3
Replaces: linux-image-6.1.0-47-cloud-amd64-unsigned
Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool
Recommends: firmware-linux-free, apparmor
Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux
Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~)
Conflicts: linux-image-6.1.0-47-cloud-amd64-unsigned
Description: Linux 6.1 for x86-64 cloud (signed)
 The Linux kernel 6.1 and modules for use on cloud platforms including
 Amazon EC2, Microsoft Azure, and Google Compute Engine.
 .
 The kernel image and modules are signed for use with Secure Boot.
Built-Using: linux (= 6.1.170-3)
Homepage: https://www.kernel.org/

Package: linux-image-6.1.0-48-cloud-amd64
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 105025
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux-signed-amd64 (6.1.172+1)
Version: 6.1.172-1
Config-Version: 6.1.172-1
Replaces: linux-image-6.1.0-48-cloud-amd64-unsigned
Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool
Recommends: firmware-linux-free, apparmor
Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux
Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~)
Conflicts: linux-image-6.1.0-48-cloud-amd64-unsigned
Description: Linux 6.1 for x86-64 cloud (signed)
 The Linux kernel 6.1 and modules for use on cloud platforms including
 Amazon EC2, Microsoft Azure, and Google Compute Engine.
 .
 The kernel image and modules are signed for use with Secure Boot.
Built-Using: linux (= 6.1.172-1)
Homepage: https://www.kernel.org/

Package: linux-image-6.1.0-49-cloud-amd64
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 105023
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux-signed-amd64 (6.1.174+1)
Version: 6.1.174-1
Config-Version: 6.1.174-1
Replaces: linux-image-6.1.0-49-cloud-amd64-unsigned
Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool
Recommends: firmware-linux-free, apparmor
Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux
Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~)
Conflicts: linux-image-6.1.0-49-cloud-amd64-unsigned
Description: Linux 6.1 for x86-64 cloud (signed)
 The Linux kernel 6.1 and modules for use on cloud platforms including
 Amazon EC2, Microsoft Azure, and Google Compute Engine.
 .
 The kernel image and modules are signed for use with Secure Boot.
Built-Using: linux (= 6.1.174-1)
Homepage: https://www.kernel.org/

Package: linux-image-6.1.0-50-cloud-amd64
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 105110
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux-signed-amd64 (6.1.176+1)
Version: 6.1.176-1
Config-Version: 6.1.176-1
Replaces: linux-image-6.1.0-50-cloud-amd64-unsigned
Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool
Recommends: firmware-linux-free, apparmor
Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux
Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~)
Conflicts: linux-image-6.1.0-50-cloud-amd64-unsigned
Description: Linux 6.1 for x86-64 cloud (signed)
 The Linux kernel 6.1 and modules for use on cloud platforms including
 Amazon EC2, Microsoft Azure, and Google Compute Engine.
 .
 The kernel image and modules are signed for use with Secure Boot.
Built-Using: linux (= 6.1.176-1)
Homepage: https://www.kernel.org/

Package: linux-image-6.1.0-51-cloud-amd64
Status: deinstall ok config-files
Priority: optional
Section: kernel
Installed-Size: 105123
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux-signed-amd64 (6.1.177+1)
Version: 6.1.177-1
Config-Version: 6.1.177-1
Replaces: linux-image-6.1.0-51-cloud-amd64-unsigned
Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool
Recommends: firmware-linux-free, apparmor
Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux
Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~)
Conflicts: linux-image-6.1.0-51-cloud-amd64-unsigned
Description: Linux 6.1 for x86-64 cloud (signed)
 The Linux kernel 6.1 and modules for use on cloud platforms including
 Amazon EC2, Microsoft Azure, and Google Compute Engine.
 .
 The kernel image and modules are signed for use with Secure Boot.
Built-Using: linux (= 6.1.177-1)
Homepage: https://www.kernel.org/

Package: linux-image-6.1.0-52-cloud-amd64
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 105212
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux-signed-amd64 (6.1.180+1)
Version: 6.1.180-1
Replaces: linux-image-6.1.0-52-cloud-amd64-unsigned
Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool
Recommends: firmware-linux-free, apparmor
Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux
Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~)
Conflicts: linux-image-6.1.0-52-cloud-amd64-unsigned
Description: Linux 6.1 for x86-64 cloud (signed)
 The Linux kernel 6.1 and modules for use on cloud platforms including
 Amazon EC2, Microsoft Azure, and Google Compute Engine.
 .
 The kernel image and modules are signed for use with Secure Boot.
Built-Using: linux (= 6.1.180-1)
Homepage: https://www.kernel.org/

Package: linux-image-6.1.0-53-cloud-amd64
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 105252
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux-signed-amd64 (6.1.187+1)
Version: 6.1.187-1
Replaces: linux-image-6.1.0-53-cloud-amd64-unsigned
Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool
Recommends: firmware-linux-free, apparmor
Suggests: linux-doc-6.1, debian-kernel-handbook, grub-pc | grub-efi-amd64 | extlinux
Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~)
Conflicts: linux-image-6.1.0-53-cloud-amd64-unsigned
Description: Linux 6.1 for x86-64 cloud (signed)
 The Linux kernel 6.1 and modules for use on cloud platforms including
 Amazon EC2, Microsoft Azure, and Google Compute Engine.
 .
 The kernel image and modules are signed for use with Secure Boot.
Built-Using: linux (= 6.1.187-1)
Homepage: https://www.kernel.org/

Package: linux-image-cloud-amd64
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 13
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux-signed-amd64 (6.1.187+1)
Version: 6.1.187-1
Provides: linux-latest-modules-6.1.0-53-cloud-amd64, virtualbox-guest-modules, wireguard-modules (= 1.0.0)
Depends: linux-image-6.1.0-53-cloud-amd64 (= 6.1.187-1)
Description: Linux for x86-64 cloud (meta-package)
 This package depends on the latest Linux kernel and modules for use on
 cloud platforms including Amazon EC2, Microsoft Azure, and Google Compute
 Engine.
Built-Using: linux (= 6.1.187-1)
Homepage: https://www.kernel.org/

Package: linux-kbuild-6.1
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 2300
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: linux
Version: 6.1.187-1
Depends: libc6 (>= 2.34), libelf1 (>= 0.142), libssl3 (>= 3.0.0)
Description: Kbuild infrastructure for Linux 6.1
 This package provides the kbuild infrastructure for the headers packages
 for Linux kernel version 6.1.
Homepage: https://www.kernel.org/

Package: linux-libc-dev
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 7092
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: linux
Version: 6.1.187-1
Description: Linux support headers for userspace development
 This package provides userspaces headers from the Linux kernel.  These
 headers are used by the installed headers for GNU libc and other system
 libraries.
Homepage: https://www.kernel.org/

Package: locales
Status: install ok installed
Priority: standard
Section: localization
Installed-Size: 15847
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: all
Source: glibc
Version: 2.36-9+deb12u14
Depends: libc-bin (>> 2.36), libc-l10n (>> 2.36), debconf (>= 0.5) | debconf-2.0
Conffiles:
 /etc/locale.alias 4a3f5ef911616822ec6fe04e31930bbf
Description: GNU C Library: National Language (locale) data [support]
 Machine-readable data files, shared objects and programs used by the
 C library for localization (l10n) and internationalization (i18n) support.
 .
 This package contains tools to generate locale definitions from source
 files (included in this package). It allows you to customize which
 definitions actually get generated. This is a space-saver over how this
 package used to be, with all locales generated by default. This created
 a package that unpacked to an excess of 30 megs.
Homepage: https://www.gnu.org/software/libc/libc.html

Package: login
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 2550
Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: shadow
Version: 1:4.13+dfsg1-1+deb12u2
Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.34), libcrypt1 (>= 1:4.1.0), libpam0g (>= 0.99.7.1), libpam-runtime, libpam-modules
Conflicts: python-4suite (<< 0.99cvs20060405-1)
Conffiles:
 /etc/login.defs f43a7b1eb7e082f1d4e2cb8f8376e71b
 /etc/pam.d/login 5afbc06eb5f71fef25170cf3c936a442
Description: system login tools
 This package provides some required infrastructure for logins and for
 changing effective user or group IDs, including:
  * login, the program that invokes a user shell on a virtual terminal;
  * nologin, a dummy shell for disabled user accounts;
Homepage: https://github.com/shadow-maint/shadow

Package: logsave
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 50
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: foreign
Source: e2fsprogs (1.47.0-2)
Version: 1.47.0-2+b2
Replaces: e2fsprogs (<< 1.45.3-1)
Depends: libc6 (>= 2.34)
Breaks: e2fsprogs (<< 1.45.3-1)
Description: save the output of a command in a log file
 The logsave program will execute cmd_prog with the specified
 argument(s), and save a copy of its output to logfile.  If the
 containing directory for logfile does not exist, logsave will
 accumulate the output in memory until it can be written out.  A copy
 of the output will also be written to standard output.
Homepage: http://e2fsprogs.sourceforge.net

Package: lsb-release
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 17
Maintainer: Gioele Barabucci <gioele@svario.it>
Architecture: all
Multi-Arch: foreign
Source: lsb-release-minimal
Version: 12.0-1
Description: Linux Standard Base version reporting utility (minimal implementation)
 The Linux Standard Base (http://www.linuxbase.org/) is a standard
 core system that third-party applications written for Linux can
 depend upon.
 .
 The lsb-release command is a simple tool to help identify the Linux
 distribution being used and its compliance with the Linux Standard Base.
 .
 This package contains a bare-bones implementation that uses the
 information in /etc/os-release instead of relying on LSB packages.
Homepage: https://gioele.io/lsb-release-minimal

Package: lsof
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 482
Maintainer: Andres Salomon <dilinger@debian.org>
Architecture: amd64
Version: 4.95.0-1
Depends: libc6 (>= 2.33), libselinux1 (>= 3.1~), libtirpc3 (>= 1.0.2)
Description: utility to list open files
 Lsof is a Unix-specific diagnostic tool.  Its name stands
 for LiSt Open Files, and it does just that.  It lists
 information about any files that are open, by processes
 currently running on the system.
Homepage: https://github.com/lsof-org/lsof

Package: lua-lpeg
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 252
Maintainer: Enrico Tassi <gareuselesinge@debian.org>
Architecture: amd64
Multi-Arch: same
Version: 1.0.2-2
Provides: lua5.1-lpeg, lua5.2-lpeg, lua5.3-lpeg, lua5.4-lpeg
Depends: libc6 (>= 2.14)
Description: LPeg library for the Lua language
 LPeg is a new pattern-matching library for Lua, based on Parsing Expression
 Grammars (PEGs). PEGs look similar to regular expressions or context-free
 grammars in Backus-Naur form (BNF) notation. PEGs make a good replacement for
 regular expressions, because they are strictly more powerful. For example, a
 regular expression inherently cannot find matched pairs of parentheses, because
 it is not recursive, but a PEG can.
Homepage: http://www.inf.puc-rio.br/~roberto/lpeg.html
Lua-Versions: 5.1 5.2 5.3 5.4

Package: m4
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 670
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.4.19-3
Depends: libc6 (>= 2.34)
Suggests: m4-doc
Description: macro processing language
 GNU `m4' is an implementation of the traditional UNIX macro
 processor.  It is mostly SVR4 compatible, although it has some
 extensions (for example, handling more than 9 positional parameters to
 macros).  `m4' also has builtin functions for including files, running
 shell commands, doing arithmetic, etc.  Autoconf needs GNU `m4' for
 generating `configure' scripts, but not for running them.
Homepage: https://www.gnu.org/software/m4/

Package: mailcap
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 86
Maintainer: Mime-Support Packagers <team+debian-mimesupport-packagers@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 3.70+nmu1
Replaces: mime-support (<< 3.65)
Provides: run-mailcap
Depends: perl, media-types
Recommends: bzip2, file, xz-utils
Breaks: mime-support (<< 3.65)
Conffiles:
 /etc/mailcap.order ba07e08a7fe3741d0b8339127963190e
Description: Debian's mailcap system, and support programs
 The mailcap system associates media types with programs that can handle them,
 using system and user configuration files.  A file's media type is determined
 by its extension or by running the "file" command if available.
 .
 Other packages register their programs as viewers/editors/composers/etc by
 placing mailcap entry files or FreeDesktop menu entries in predetermined
 directories monitored by this package's dpkg triggers.
 .
 This package provides a "run-mailcap" program to open arbitrary files, and in
 addition the "see", "edit", "compose", and "print" aliases to display, alter,
 create, and print (respectively).
 .
 This package also provides the "debian-view" utility to handle Debian packages
 interactively.

Package: make
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 1592
Maintainer: Manoj Srivastava <srivasta@debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: make-dfsg
Version: 4.3-4.1
Replaces: make-guile
Depends: libc6 (>= 2.27)
Suggests: make-doc
Conflicts: make-guile
Description: utility for directing compilation
 GNU Make is a utility which controls the generation of executables
 and other target files of a program from the program's source
 files. It determines automatically which pieces of a large program
 need to be (re)created, and issues the commands to (re)create
 them. Make can be used to organize any task in which targets (files)
 are to be automatically updated based on input files whenever the
 corresponding input is newer --- it is not limited to building
 computer programs. Indeed, Make is a general purpose dependency
 solver.
Homepage: https://www.gnu.org/software/make/

Package: man-db
Status: install ok installed
Priority: important
Section: doc
Installed-Size: 2963
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.11.2-2
Replaces: man, nlsutils
Provides: man, man-browser
Depends: bsdextrautils | bsdmainutils (<< 12.1.1~), groff-base, debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.34), libgdbm6 (>= 1.16), libpipeline1 (>= 1.5.0), libseccomp2 (>= 2.1.0), zlib1g (>= 1:1.1.4)
Suggests: apparmor, groff, less, www-browser
Conflicts: man
Conffiles:
 /etc/apparmor.d/usr.bin.man 4f614d75041882370498f7fe2d43a44b
 /etc/cron.daily/man-db 62423d7fa68568c9c0aefceac182d9ea
 /etc/cron.weekly/man-db eebc5bb3e1dac973301570da3f453334
 /etc/manpath.config 6d70333de0a08c7a71018da458201eb6
Description: tools for reading manual pages
 This package provides the man command, the primary way of examining the
 system help files (manual pages). Other utilities provided include the
 whatis and apropos commands for searching the manual page database, the
 manpath utility for determining the manual page search path, and the
 maintenance utilities mandb, catman and zsoelim. man-db uses the groff
 suite of programs to format and display the manual pages.
Homepage: https://man-db.gitlab.io/man-db/

Package: manpages
Status: install ok installed
Priority: standard
Section: doc
Installed-Size: 1548
Maintainer: Dr. Tobias Quathamer <toddy@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 6.03-2
Replaces: initscripts (<< 3.0.0-1), inn2-dev (<< 2.6.5-1), manpages-dev (<< 5.09-2)
Suggests: man-browser
Breaks: initscripts (<< 3.0.0-1), inn2-dev (<< 2.6.5-1), manpages-dev (<< 5.09-2)
Description: Manual pages about using a GNU/Linux system
 This package contains GNU/Linux manual pages for these sections:
  4 = Devices (e.g. hd, sd).
  5 = File formats and protocols, syntaxes of several system
      files (e.g. wtmp, /etc/passwd, nfs).
  7 = Conventions and standards, macro packages, etc.
      (e.g. nroff, ascii).
 .
 Beside the intro man page describing the section, a few manual
 pages from sections 1,6 and 8 are also provided.
 .
 The man pages describe syntaxes of several system files.
Homepage: https://www.kernel.org/doc/man-pages/

Package: manpages-dev
Status: install ok installed
Priority: optional
Section: doc
Installed-Size: 3732
Maintainer: Dr. Tobias Quathamer <toddy@debian.org>
Architecture: all
Multi-Arch: foreign
Source: manpages
Version: 6.03-2
Replaces: inn2-dev (<< 2.7.0-1)
Depends: manpages
Suggests: man-browser
Breaks: inn2-dev (<< 2.7.0-1), manpages (<< 6.01-1)
Description: Manual pages about using GNU/Linux for development
 These man pages describe the Linux programming interface, including
 these two sections:
  2 = Linux system calls.
  3 = Library calls (note that a more comprehensive source of information
      may be found in the glibc-doc and glibc-doc-reference packages).
Homepage: https://www.kernel.org/doc/man-pages/

Package: mariadb-client
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 62866
Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Architecture: amd64
Source: mariadb
Version: 1:10.11.18-0+deb12u1
Replaces: mariadb-client-10.0, mariadb-client-10.1, mariadb-client-10.2, mariadb-client-10.3, mariadb-client-10.4, mariadb-client-10.5, mariadb-client-10.6, mariadb-client-5.5, mariadb-client-core (<< 1:10.11.18-0+deb12u1), mariadb-client-core-10.0, mariadb-client-core-10.1, mariadb-client-core-10.2, mariadb-client-core-10.3, mariadb-client-core-10.4, mariadb-client-core-10.5, mariadb-client-core-10.6, mariadb-server (<< 1:10.11.18-0+deb12u1), mariadb-server-10.0, mariadb-server-10.1, mariadb-server-10.2, mariadb-server-10.3, mariadb-server-10.4, mariadb-server-10.5 (<< 1:10.11), mariadb-server-10.6, mysql-client-5.5, mysql-client-5.6, mysql-client-5.7, mysql-client-8.0, mysql-server-5.5, mysql-server-5.7, mysql-server-core-8.0, mytop, percona-server-server-5.6, percona-xtradb-cluster-server-5.6, percona-xtradb-cluster-server-5.7, virtual-mysql-client
Provides: virtual-mysql-client
Depends: debianutils (>= 1.6), libconfig-inifiles-perl, mariadb-client-core (>= 1:10.11.18-0+deb12u1), perl:any, libc6 (>= 2.34), libgcc-s1 (>= 3.0), libssl3 (>= 3.0.0), libstdc++6 (>= 5.2), zlib1g (>= 1:1.2.0)
Recommends: libdbd-mariadb-perl | libdbd-mysql-perl, libdbi-perl, libterm-readkey-perl
Breaks: mariadb-client-10.0, mariadb-client-10.1, mariadb-client-10.2, mariadb-client-10.3, mariadb-client-10.4, mariadb-client-10.5, mariadb-client-10.6, mariadb-client-5.5, mariadb-client-core (<< 1:10.11.18-0+deb12u1), mariadb-client-core-10.0, mariadb-client-core-10.1, mariadb-client-core-10.2, mariadb-client-core-10.3, mariadb-client-core-10.4, mariadb-client-core-10.5, mariadb-client-core-10.6, mariadb-server (<< 1:10.11.18-0+deb12u1), mariadb-server-10.0, mariadb-server-10.1, mariadb-server-10.2, mariadb-server-10.3, mariadb-server-10.4, mariadb-server-10.5 (<< 1:10.11), mariadb-server-10.6, mysql-client-5.5, mysql-client-5.6, mysql-client-5.7, mysql-client-8.0, mysql-server-5.5, mysql-server-5.7, mysql-server-core-8.0, percona-server-server-5.6, percona-xtradb-cluster-server-5.6, percona-xtradb-cluster-server-5.7
Conflicts: mysql-client-core-5.5, mysql-client-core-5.6, mysql-client-core-5.7, mysql-client-core-8.0, mytop, virtual-mysql-client
Conffiles:
 /etc/mysql/mariadb.conf.d/50-client.cnf a8028d231dad4d2658bfd8b0db11f85e
 /etc/mysql/mariadb.conf.d/50-mysql-clients.cnf 2e0e48974b270cb20c2b66aa71f6cd92
 /etc/mysql/mariadb.conf.d/60-galera.cnf e2f4b79114ba923199ead4b7e94eee70
Description: MariaDB database client binaries
 MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MariaDB are speed, robustness and
 ease of use.
 .
 This package includes the client binaries and the additional tools
 innotop and mariadb-report (mysqlreport).
Homepage: https://mariadb.org/

Package: mariadb-client-core
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 14641
Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Architecture: amd64
Source: mariadb
Version: 1:10.11.18-0+deb12u1
Replaces: mariadb-client-10.0, mariadb-client-core-10.0, mariadb-client-core-10.1, mariadb-client-core-10.2, mariadb-client-core-10.3, mariadb-client-core-10.4, mariadb-client-core-10.5, mariadb-client-core-10.6, mariadb-client-core-5.5, mariadb-server-10.0, mariadb-server-10.1, mariadb-server-core (<< 1:10.11.18-0+deb12u1), mariadb-server-core-10.3, mariadb-server-core-10.4, mariadb-server-core-10.5, mariadb-server-core-10.6, mysql-client-core-5.5, mysql-client-core-5.6, mysql-client-core-5.7, mysql-client-core-8.0, mysql-cluster-community-client-plugins, mysql-server-core-5.5, mysql-server-core-5.6, mysql-server-core-5.7, mysql-server-core-8.0, percona-server-server-5.6, percona-server-server-5.7, percona-server-server-8.0, percona-xtradb-cluster-server-5.6, percona-xtradb-cluster-server-5.7, percona-xtradb-cluster-server-8.0, virtual-mysql-client-core
Provides: virtual-mysql-client-core
Depends: libmariadb3 (>= 10.5.4), mariadb-common (>= 1:10.11.18-0+deb12u1), libc6 (>= 2.34), libedit2 (>= 2.11-20080614-0), libgcc-s1 (>= 3.0), libncurses6 (>= 6), libssl3 (>= 3.0.0), libstdc++6 (>= 4.1.1), libtinfo6 (>= 6), zlib1g (>= 1:1.1.4)
Breaks: mariadb-client-10.0, mariadb-client-core-10.0, mariadb-client-core-10.1, mariadb-client-core-10.2, mariadb-client-core-10.3, mariadb-client-core-10.4, mariadb-client-core-10.5, mariadb-client-core-10.6, mariadb-client-core-5.5, mariadb-server-10.0, mariadb-server-10.1, mariadb-server-core (<< 1:10.11.18-0+deb12u1), mariadb-server-core-10.3, mariadb-server-core-10.4, mariadb-server-core-10.5, mariadb-server-core-10.6, mysql-client-core-5.5, mysql-client-core-5.6, mysql-client-core-5.7, mysql-client-core-8.0, mysql-cluster-community-client-plugins, mysql-server-core-5.5, mysql-server-core-5.6, mysql-server-core-5.7, mysql-server-core-8.0, percona-server-server-5.6, percona-server-server-5.7, percona-server-server-8.0, percona-xtradb-cluster-server-5.6, percona-xtradb-cluster-server-5.7, percona-xtradb-cluster-server-8.0
Conflicts: mysql-client-5.5, mysql-client-5.6, mysql-client-5.7, mysql-client-8.0, virtual-mysql-client-core
Description: MariaDB database core client binaries
 MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MariaDB are speed, robustness and
 ease of use.
 .
 This package includes the core client files, as used by Akonadi.
Homepage: https://mariadb.org/

Package: mariadb-common
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 68
Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: mariadb
Version: 1:10.11.18-0+deb12u1
Depends: mysql-common (>= 5.6.25)
Conffiles:
 /etc/mysql/mariadb.cnf f78499dd07dccc3238cc15dd937b87bb
Description: MariaDB common configuration files
 MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MariaDB are speed, robustness and
 ease of use.
 .
 This package includes configuration files common to all MariaDB programs.
Homepage: https://mariadb.org/

Package: mariadb-plugin-provider-bzip2
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 83
Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Architecture: amd64
Source: mariadb
Version: 1:10.11.18-0+deb12u1
Depends: mariadb-server (>= 1:10.11.1-1), libbz2-1.0
Conffiles:
 /etc/mysql/mariadb.conf.d/provider_bzip2.cnf 6c0ab650087968bec0b0070644a32750
Description: BZip2 compression support in the server and storage engines
 The various MariaDB storage engines, such as InnoDB, RocksDB, Mroonga,
 can use different compression libraries.
 .
 Plugin provides BZip2 (https://sourceware.org/bzip2/) compression
 .
 Note that these affect InnoDB and Mroonga only;
 RocksDB still uses the compression algorithms from its own library
Homepage: https://mariadb.org/

Package: mariadb-plugin-provider-lz4
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 83
Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Architecture: amd64
Source: mariadb
Version: 1:10.11.18-0+deb12u1
Depends: mariadb-server (>= 1:10.11.1-1), liblz4-1 (>= 0.0~r130)
Conffiles:
 /etc/mysql/mariadb.conf.d/provider_lz4.cnf 5dc12c9891064bc1e8a2667e1f13507f
Description: LZ4 compression support in the server and storage engines
 The various MariaDB storage engines, such as InnoDB, RocksDB, Mroonga,
 can use different compression libraries.
 .
 Plugin provides LZ4 (http://lz4.github.io/lz4/) compression
 .
 Note that these affect InnoDB and Mroonga only;
 RocksDB still uses the compression algorithms from its own library
Homepage: https://mariadb.org/

Package: mariadb-plugin-provider-lzma
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 84
Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Architecture: amd64
Source: mariadb
Version: 1:10.11.18-0+deb12u1
Depends: mariadb-server (>= 1:10.11.1-1), liblzma5 (>= 5.1.1alpha+20110809)
Conffiles:
 /etc/mysql/mariadb.conf.d/provider_lzma.cnf 69ea1a502df249cf2257fa231827ab0a
Description: LZMA compression support in the server and storage engines
 The various MariaDB storage engines, such as InnoDB, RocksDB, Mroonga,
 can use different compression libraries.
 .
 Plugin provides LZMA (https://tukaani.org/lzma/) compression
 .
 Note that these affect InnoDB and Mroonga only;
 RocksDB still uses the compression algorithms from its own library
Homepage: https://mariadb.org/

Package: mariadb-plugin-provider-lzo
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 83
Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Architecture: amd64
Source: mariadb
Version: 1:10.11.18-0+deb12u1
Depends: mariadb-server (>= 1:10.11.1-1), liblzo2-2 (>= 2.02)
Conffiles:
 /etc/mysql/mariadb.conf.d/provider_lzo.cnf 4753866a6c3ac054a75c87782b450b5b
Description: LZO compression support in the server and storage engines
 The various MariaDB storage engines, such as InnoDB, RocksDB, Mroonga,
 can use different compression libraries.
 .
 Plugin provides LZO (http://www.oberhumer.com/opensource/lzo/) compression
 .
 Note that these affect InnoDB and Mroonga only;
 RocksDB still uses the compression algorithms from its own library
Homepage: https://mariadb.org/

Package: mariadb-plugin-provider-snappy
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 83
Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Architecture: amd64
Source: mariadb
Version: 1:10.11.18-0+deb12u1
Depends: mariadb-server (>= 1:10.11.1-1), libsnappy1v5 (>= 1.1.9)
Conffiles:
 /etc/mysql/mariadb.conf.d/provider_snappy.cnf 97735326f1364fa9e7bd76893334fce0
Description: Snappy compression support in the server and storage engines
 The various MariaDB storage engines, such as InnoDB, RocksDB, Mroonga,
 can use different compression libraries.
 .
 Plugin provides Snappy (https://github.com/google/snappy) compression
 .
 Note that these affect InnoDB and Mroonga only;
 RocksDB still uses the compression algorithms from its own library
Homepage: https://mariadb.org/

Package: mariadb-server
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 53787
Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Architecture: amd64
Source: mariadb
Version: 1:10.11.18-0+deb12u1
Replaces: handlersocket-mysql-5.5, mariadb-galera-server, mariadb-galera-server-10.0, mariadb-galera-server-5.5, mariadb-server-10.0, mariadb-server-10.1, mariadb-server-10.2, mariadb-server-10.3, mariadb-server-10.4, mariadb-server-10.5 (<< 1:10.11), mariadb-server-10.6, mariadb-server-5.5, mariadb-tokudb-engine-10.0, mariadb-tokudb-engine-10.1, mariadb-tokudb-engine-5.5, mysql-client-5.5, mysql-client-5.7, mysql-client-core-8.0, mysql-server-5.5, mysql-server-5.6, mysql-server-5.7, mysql-server-8.0, percona-server-server-5.6, percona-xtradb-cluster-server-5.6, percona-xtradb-cluster-server-5.7, virtual-mysql-server
Provides: virtual-mysql-server
Depends: galera-4 (>= 26.4), gawk, iproute2, libdbi-perl, lsof, mariadb-client (>= 1:10.11.18-0+deb12u1), mariadb-server-core (>= 1:10.11.18-0+deb12u1), passwd, perl (>= 5.6), procps, psmisc, rsync, socat, debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.34), libgcc-s1 (>= 3.0), libpam0g (>= 0.99.7.1), libssl3 (>= 3.0.0), libstdc++6 (>= 11), zlib1g (>= 1:1.1.4)
Pre-Depends: adduser (>= 3.40), debconf, mariadb-common (>= 1:10.11.18-0+deb12u1)
Recommends: libhtml-template-perl, mariadb-plugin-provider-bzip2, mariadb-plugin-provider-lz4, mariadb-plugin-provider-lzma, mariadb-plugin-provider-lzo, mariadb-plugin-provider-snappy, pv
Suggests: mariadb-test, netcat-openbsd
Breaks: cqrlog (<< 1.9.0-5~), galera-3 (<< 26.4), handlersocket-mysql-5.5, mariadb-galera-server, mariadb-galera-server-10.0, mariadb-galera-server-5.5, mariadb-server-10.0, mariadb-server-10.1, mariadb-server-10.2, mariadb-server-10.3, mariadb-server-10.4, mariadb-server-10.5 (<< 1:10.11), mariadb-server-10.6, mariadb-server-5.5, mariadb-tokudb-engine-10.0, mariadb-tokudb-engine-10.1, mariadb-tokudb-engine-5.5, mysql-client-5.5, mysql-client-5.7, mysql-client-core-8.0, mysql-server-5.5, mysql-server-5.6, mysql-server-5.7, mysql-server-8.0
Conflicts: handlersocket-mysql-5.5, mariadb-tokudb-engine-10.0, mariadb-tokudb-engine-10.1, mariadb-tokudb-engine-5.5, mysql-server-core-5.5, mysql-server-core-5.6, mysql-server-core-5.7, mysql-server-core-8.0, percona-server-server-5.6, percona-xtradb-cluster-server-5.6, percona-xtradb-cluster-server-5.7, virtual-mysql-server
Conffiles:
 /etc/apparmor.d/usr.sbin.mariadbd dacafa122cb26bc12319782acc6aff47
 /etc/init.d/mariadb 9fb74f9aaef6ab6b3d55b808539d17f3
 /etc/logcheck/ignore.d.paranoid/mariadb-server e0e3191cc12a25fdd6f57889a204295d
 /etc/logcheck/ignore.d.server/mariadb-server 4f612f8c23f0463cf34ccbd851009388
 /etc/logcheck/ignore.d.workstation/mariadb-server 4f612f8c23f0463cf34ccbd851009388
 /etc/logrotate.d/mariadb 9694f545cc2483ce09930879b2fb9aa6
 /etc/mysql/debian-start f9fc2bcbdc7307bab262106c01656ad4
 /etc/mysql/mariadb.conf.d/50-mysqld_safe.cnf ae130218a23989c3a504c95831610b4b
 /etc/mysql/mariadb.conf.d/50-server.cnf 504798f56c32ef59cc519b2bfec59274
 /etc/security/user_map.conf 126cbe3b479937c707031f9576702be9
Description: MariaDB database server binaries
 MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MariaDB are speed, robustness and
 ease of use.
 .
 This package includes the server binaries.
Homepage: https://mariadb.org/

Package: mariadb-server-core
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 44908
Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Architecture: amd64
Source: mariadb
Version: 1:10.11.18-0+deb12u1
Replaces: mariadb-client-10.1, mariadb-server (<< 1:10.11.18-0+deb12u1), mariadb-server-10.0, mariadb-server-10.1, mariadb-server-10.2, mariadb-server-10.3, mariadb-server-10.4, mariadb-server-10.5 (<< 1:10.11), mariadb-server-10.6, mariadb-server-core-10.0, mariadb-server-core-10.1, mariadb-server-core-10.2, mariadb-server-core-10.3, mariadb-server-core-10.4, mariadb-server-core-10.5, mariadb-server-core-10.6, mariadb-server-core-5.5, mysql-client-5.5, mysql-client-5.6, mysql-client-5.7, mysql-client-8.0, mysql-server-core-5.5, mysql-server-core-5.6, mysql-server-core-5.7, mysql-server-core-8.0, percona-server-server-5.6, percona-xtradb-cluster-server-5.6, percona-xtradb-cluster-server-5.7, virtual-mysql-server-core
Provides: virtual-mysql-server-core
Depends: mariadb-common (>= 1:10.11.18-0+deb12u1), libaio1 (>= 0.3.93), libc6 (>= 2.34), libcrypt1 (>= 1:4.1.0), libgcc-s1 (>= 3.0), libnuma1 (>= 2.0.11), libpcre2-8-0 (>= 10.22), libssl3 (>= 3.0.0), libstdc++6 (>= 12), libsystemd0 (>= 227), liburing2 (>= 2.3), zlib1g (>= 1:1.2.0)
Breaks: mariadb-client-10.1, mariadb-server-10.0, mariadb-server-10.1, mariadb-server-10.2, mariadb-server-10.3, mariadb-server-10.4, mariadb-server-10.5 (<< 1:10.11), mariadb-server-core-10.0, mariadb-server-core-10.1, mariadb-server-core-10.2, mariadb-server-core-10.3, mariadb-server-core-10.4, mariadb-server-core-10.5, mariadb-server-core-10.6, mariadb-server-core-5.5, mysql-client-5.5, mysql-client-5.6, mysql-server-core-5.5, mysql-server-core-5.6, mysql-server-core-5.7, mysql-server-core-8.0, percona-server-server-5.6, percona-xtradb-cluster-server-5.6, percona-xtradb-cluster-server-5.7
Conflicts: mariadb-galera-server-5.5, mysql-server-5.5, mysql-server-5.6, mysql-server-5.7, mysql-server-8.0, virtual-mysql-server-core
Description: MariaDB database core server files
 MariaDB is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MariaDB are speed, robustness and
 ease of use.
 .
 This package includes the core server files, as used by Akonadi.
Homepage: https://mariadb.org/

Package: mawk
Status: install ok installed
Priority: required
Section: interpreters
Installed-Size: 263
Maintainer: Boyuan Yang <byang@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.3.4.20200120-3.1
Provides: awk
Depends: libc6 (>= 2.29)
Description: Pattern scanning and text processing language
 Mawk is an interpreter for the AWK Programming Language. The AWK
 language is useful for manipulation of data files, text retrieval and
 processing, and for prototyping and experimenting with algorithms. Mawk
 is a new awk meaning it implements the AWK language as defined in Aho,
 Kernighan and Weinberger, The AWK Programming Language, Addison-Wesley
 Publishing, 1988. (Hereafter referred to as the AWK book.) Mawk conforms
 to the POSIX 1003.2 (draft 11.3) definition of the AWK language
 which contains a few features not described in the AWK book, and mawk
 provides a small number of extensions.
 .
 Mawk is smaller and much faster than gawk. It has some compile-time
 limits such as NF = 32767 and sprintf buffer = 1020.
Homepage: https://invisible-island.net/mawk/

Package: mc
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1490
Maintainer: Dmitry Smirnov <onlyjob@debian.org>
Architecture: amd64
Version: 3:4.8.29-2
Provides: mcedit
Depends: libc6 (>= 2.34), libext2fs2 (>= 1.37), libglib2.0-0 (>= 2.67.3), libgpm2 (>= 1.20.7), libslang2 (>= 2.2.4), libssh2-1 (>= 1.2.8), mc-data (= 3:4.8.29-2)
Recommends: mailcap, perl, sensible-utils, unzip
Suggests: arj, bzip2, catdvi | texlive-binaries, dbview, djvulibre-bin, epub-utils, file, genisoimage, gv, imagemagick, libaspell-dev, links | w3m | lynx, odt2txt, poppler-utils, python, python-boto, python-tz, unar, wimtools, xpdf | pdf-viewer, zip
Conffiles:
 /etc/mc/edit.indent.rc 008c6d0205315a87a977c7cd74a1526e
 /etc/mc/filehighlight.ini c171a904cc6852bfb16a95be51bb5afd
 /etc/mc/mc.default.keymap 5c9bb9fe85971b4647d78a36349a631c
 /etc/mc/mc.emacs.keymap 9a29cb1cf781358dbe6d260fb17cb069
 /etc/mc/mc.ext.ini 2e055993a712c3ce9cf5cbbe9fba8753
 /etc/mc/mc.menu e3f16ca2ea9999bd5074368f26984723
 /etc/mc/mcedit.menu 8db98bd6c57ab17599bac4a76f61cf4d
 /etc/mc/sfs.ini bc412d55e342e6dd7465df0bbfc53205
Description: Midnight Commander - a powerful file manager
 GNU Midnight Commander is a text-mode full-screen file manager. It
 uses a two panel interface and a subshell for command execution. It
 includes an internal editor with syntax highlighting and an internal
 viewer with support for binary files. Also included is Virtual
 Filesystem (VFS), that allows files on remote systems (e.g. FTP, SSH
 servers) and files inside archives to be manipulated like real files.
Homepage: https://www.midnight-commander.org

Package: mc-data
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 6214
Maintainer: Dmitry Smirnov <onlyjob@debian.org>
Architecture: all
Multi-Arch: foreign
Source: mc
Version: 3:4.8.29-2
Replaces: mc (<< 3:4.8.1)
Breaks: mc (<< 3:4.8.1)
Description: Midnight Commander - a powerful file manager -- data files
 GNU Midnight Commander is a text-mode full-screen file manager. It
 uses a two panel interface and a subshell for command execution. It
 includes an internal editor with syntax highlighting and an internal
 viewer with support for binary files. Also included is Virtual
 Filesystem (VFS), that allows files on remote systems (e.g. FTP, SSH
 servers) and files inside archives to be manipulated like real files.
 .
 This package provides architecture independent files
Homepage: https://www.midnight-commander.org

Package: media-types
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 92
Maintainer: Mime-Support Packagers <team+debian-mimesupport-packagers@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 10.0.0
Replaces: mime-support (<< 3.65)
Breaks: mime-support (<< 3.65)
Conffiles:
 /etc/mime.types e8937e06f21a0edb49813f91567be8e6
Description: List of standard media types and their usual file extension
 This package installs the configuration file /etc/mime.types, that lists
 standard media types (originally known as "MIME" types) and their usual file
 extension.  This provides a simple way for programs to have a first guess at a
 file's content.  On standard Debian desktop systems, one will also find more
 sophisticated tools, for instance provided by the "file" and "xdg-utils"
 packages.
 .
 The /etc/mime.types file is compiled by hand using mostly information provided
 by the Internet Assigned Numbers Authority (IANA).

Package: mesa-va-drivers
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 12442
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: mesa
Version: 22.3.6-1+deb12u2
Replaces: vdpau-va-driver (<< 0.7.4-5)
Provides: va-driver
Depends: libc6 (>= 2.34), libdrm-amdgpu1 (>= 2.4.110), libdrm-nouveau2 (>= 2.4.66), libdrm-radeon1 (>= 2.4.31), libdrm2 (>= 2.4.75), libelf1 (>= 0.142), libexpat1 (>= 2.0.1), libgcc-s1 (>= 3.4), libllvm15, libstdc++6 (>= 11), libx11-xcb1 (>= 2:1.8.4), libxcb-dri2-0 (>= 1.8), libxcb-dri3-0, libxcb-present0, libxcb-sync1, libxcb-xfixes0, libxcb1 (>= 1.9.2), libxshmfence1, libzstd1 (>= 1.5.2), zlib1g (>= 1:1.1.4)
Breaks: vdpau-va-driver (<< 0.7.4-5)
Enhances: libva2
Description: Mesa VA-API video acceleration drivers
 These libraries provide the Video Acceleration API (VA-API) for Unix.
 They provide accelerated video playback (incl. H.264) and video
 post-processing for the supported graphics cards.
 .
 This package enables support for VA-API for some gallium drivers.
Homepage: https://mesa3d.org/

Package: mesa-vdpau-drivers
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 12090
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: mesa
Version: 22.3.6-1+deb12u2
Provides: vdpau-driver
Depends: libvdpau1, libc6 (>= 2.34), libdrm-amdgpu1 (>= 2.4.110), libdrm-nouveau2 (>= 2.4.66), libdrm-radeon1 (>= 2.4.31), libdrm2 (>= 2.4.75), libelf1 (>= 0.142), libexpat1 (>= 2.0.1), libgcc-s1 (>= 3.4), libllvm15, libstdc++6 (>= 11), libx11-xcb1 (>= 2:1.8.4), libxcb-dri2-0 (>= 1.8), libxcb-dri3-0, libxcb-present0, libxcb-sync1, libxcb-xfixes0, libxcb1 (>= 1.9.2), libxshmfence1, libzstd1 (>= 1.5.2), zlib1g (>= 1:1.1.4)
Enhances: libvdpau1
Description: Mesa VDPAU video acceleration drivers
 These libraries provide the Video Decode and Presentation API for Unix.
 They provide accelerated video playback (incl. H.264) and video
 post-processing for the supported graphics cards.
 .
 This package enables support for VDPAU for some gallium drivers.
Homepage: https://mesa3d.org/

Package: mesa-vulkan-drivers
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 35599
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: mesa
Version: 22.3.6-1+deb12u2
Provides: vulkan-icd
Depends: libvulkan1, python3:any | python3-minimal:any, libc6 (>= 2.34), libdrm-amdgpu1 (>= 2.4.110), libdrm2 (>= 2.4.99), libelf1 (>= 0.142), libexpat1 (>= 2.0.1), libgcc-s1 (>= 3.4), libllvm15, libstdc++6 (>= 11), libwayland-client0 (>= 1.20.0), libx11-xcb1 (>= 2:1.8.4), libxcb-dri3-0 (>= 1.13), libxcb-present0, libxcb-randr0 (>= 1.13), libxcb-shm0, libxcb-sync1, libxcb-xfixes0, libxcb1 (>= 1.9.2), libxshmfence1, libzstd1 (>= 1.5.2), zlib1g (>= 1:1.1.4)
Description: Mesa Vulkan graphics drivers
 Vulkan is a low-overhead 3D graphics and compute API. This package
 includes Vulkan drivers provided by the Mesa project.
Homepage: https://mesa3d.org/

Package: mokutil
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 80
Maintainer: Debian UEFI Maintainers <debian-efi@lists.debian.org>
Architecture: amd64
Version: 0.6.0-2
Depends: libc6 (>= 2.33), libcrypt1 (>= 1:4.1.0), libefivar1 (>= 37), libkeyutils1 (>= 1.5.9), libssl3 (>= 3.0.0)
Description: tools for manipulating machine owner keys
 This program provides the means to enroll and erase the machine owner
 keys (MOK) stored in the database of shim.

Package: mount
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 393
Maintainer: util-linux packagers <util-linux@packages.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.38.1-5+deb12u3
Pre-Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.34), libmount1 (>= 2.38), libselinux1 (>= 3.1~), libsmartcols1 (>= 2.33)
Suggests: nfs-common
Description: tools for mounting and manipulating filesystems
 This package provides the mount(8), umount(8), swapon(8),
 swapoff(8), and losetup(8) commands.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/

Package: mysql-common
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 33
Maintainer: Debian MySQL Maintainers <pkg-mysql-maint@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: mysql-defaults (1.1.0)
Version: 5.8+1.1.0
Replaces: mariadb-server-5.5, mysql-common-5.6, mysql-server-5.5, percona-xtradb-cluster-common-5.5
Provides: mysql-common-5.6
Breaks: mariadb-common (<< 10.0.20-3~)
Conflicts: mariadb-server-5.5, mysql-common-5.6, mysql-server-5.5, percona-xtradb-cluster-common-5.5
Conffiles:
 /etc/mysql/conf.d/mysql.cnf 61e0993270966cc6bc96b46c01ade21f
 /etc/mysql/conf.d/mysqldump.cnf 20890decb4486ce539753193908fb356
 /etc/mysql/my.cnf.fallback cfe2bc1819d5e200eca8ca6912f714af
Description: MySQL database common files, e.g. /etc/mysql/my.cnf
 MySQL is a fast, stable and true multi-user, multi-threaded SQL database
 server. SQL (Structured Query Language) is the most popular database query
 language in the world. The main goals of MySQL are speed, robustness and
 ease of use.
 .
 This package includes files needed by all versions of the client library,
 e.g. /etc/mysql/my.cnf.

Package: nano
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 2804
Maintainer: Jordi Mallach <jordi@debian.org>
Architecture: amd64
Version: 7.2-1+deb12u1
Replaces: nano-tiny (<< 2.8.6-2), pico
Depends: libc6 (>= 2.34), libncursesw6 (>= 6), libtinfo6 (>= 6)
Suggests: hunspell
Breaks: nano-tiny (<< 2.8.6-2)
Conflicts: pico
Conffiles:
 /etc/nanorc be076483dde4364946fcf3d1ea5dce26
Description: small, friendly text editor inspired by Pico
 GNU nano is an easy-to-use text editor originally designed as a replacement
 for Pico, the ncurses-based editor from the non-free mailer package Pine
 (itself now available under the Apache License as Alpine).
 .
 However, GNU nano also implements many features missing in Pico, including:
  - undo/redo
  - line numbering
  - syntax coloring
  - soft-wrapping of overlong lines
  - selecting text by holding Shift
  - interactive search and replace (with regular expression support)
  - a go-to line (and column) command
  - support for multiple file buffers
  - auto-indentation
  - tab completion of filenames and search terms
  - toggling features while running
  - and full internationalization support
Homepage: https://www.nano-editor.org/

Package: ncdu
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 113
Maintainer: Eugene V. Lyubimkin <jackyf@debian.org>
Architecture: amd64
Version: 1.18-0.2
Depends: libc6 (>= 2.34), libncursesw6 (>= 6), libtinfo6 (>= 6)
Description: ncurses disk usage viewer
 Ncdu is a ncurses-based du viewer. It provides a fast and easy-to-use interface
 through famous du utility. It allows one to browse through the directories and
 show percentages of disk usage with ncurses library.
Homepage: https://dev.yorhel.nl/ncdu/

Package: ncurses-base
Essential: yes
Status: install ok installed
Priority: required
Section: misc
Installed-Size: 379
Maintainer: Craig Small <csmall@debian.org>
Architecture: all
Multi-Arch: foreign
Source: ncurses
Version: 6.4-4
Provides: ncurses-runtime
Breaks: bash-static (<< 4.4.18-1.1), libmono-corlib4.5-cil (<< 4.6.2.7+dfsg-2), libslang2 (<< 2.3.1a-3), libtinfo5 (<< 6.1), libunibilium0 (<< 2), libunibilium4 (<< 2.0.0-3), neovim (<< 0.6.0), vim-common (<< 2:9.0.1000-2), zsh-static (<< 5.4.2-4)
Conffiles:
 /etc/terminfo/README 45b6df19fb5e21f55717482fa7a30171
Description: basic terminal type definitions
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains terminfo data files to support the most common types of
 terminal, including ansi, dumb, linux, rxvt, screen, sun, vt100, vt102, vt220,
 vt52, and xterm.
Homepage: https://invisible-island.net/ncurses/

Package: ncurses-bin
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 636
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: ncurses
Version: 6.4-4
Pre-Depends: libc6 (>= 2.34), libtinfo6 (>= 6.3)
Description: terminal-related programs and man pages
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the programs used for manipulating the terminfo
 database and individual terminfo entries, as well as some programs for
 resetting terminals and such.
Homepage: https://invisible-island.net/ncurses/

Package: netbase
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 36
Maintainer: Marco d'Itri <md@linux.it>
Architecture: all
Multi-Arch: foreign
Version: 6.4
Replaces: ebtables (<< 2.0.11-2)
Breaks: ebtables (<< 2.0.11-2)
Conffiles:
 /etc/ethertypes cd7fa874d85f7587e2ed11174d58cf83
 /etc/protocols 0c247591a720f534fe543401bd4844d6
 /etc/rpc 2d7748cd0feba2e43ee52d4d7f834188
 /etc/services 3975f0d8c4e1ecb25f035edfb1ba27ac
Description: Basic TCP/IP networking system
 This package provides the necessary infrastructure for basic TCP/IP based
 networking.
 .
 In particular, it supplies common name-to-number mappings in /etc/services,
 /etc/rpc, /etc/protocols and /etc/ethertypes.

Package: nethogs
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 100
Maintainer: Paulo Roberto Alves de Oliveira (aka kretcheu) <kretcheu@gmail.com>
Architecture: amd64
Version: 0.8.7-2
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libncurses6 (>= 6), libpcap0.8 (>= 0.9.8), libstdc++6 (>= 9), libtinfo6 (>= 6)
Description: Net top tool grouping bandwidth per process
 NetHogs is a small 'net top' tool. Instead of breaking the traffic down per
 protocol or per subnet, like most tools do, it groups bandwidth by process.
 NetHogs does not rely on a special kernel module to be loaded.
Homepage: https://github.com/raboof/nethogs

Package: netpbm
Status: install ok installed
Priority: optional
Section: graphics
Installed-Size: 8200
Maintainer: Debian PhotoTools Maintainers <pkg-phototools-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: netpbm-free
Version: 2:11.01.00-2
Provides: pbmwbmp, pnmtopng
Depends: libnetpbm11 (= 2:11.01.00-2), libc6 (>= 2.34), libjpeg62-turbo (>= 1.3.1), libpng16-16 (>= 1.6.2-1), libtiff6 (>= 4.0.3), libx11-6, libxml2 (>= 2.7.4), zlib1g (>= 1:1.1.4)
Recommends: ghostscript
Description: Graphics conversion tools between image formats
 Netpbm is a toolkit for manipulation of graphic images, including
 conversion of images between a variety of different formats. There
 are over 220 separate tools in the package including converters for
 more than 80 graphics formats.
Homepage: https://netpbm.sourceforge.net/

Package: netplan.io
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 447
Maintainer: Debian netplan Maintainers <team+netplan@tracker.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 0.106-2+deb12u1
Replaces: nplan (<< 0.34~)
Provides: nplan
Depends: libc6 (>= 2.34), libglib2.0-0 (>= 2.70.0), libnetplan0 (= 0.106-2+deb12u1), libsystemd0 (>= 243), iproute2, python3, python3-dbus, python3-rich, python3-yaml, python3-netifaces, systemd (>= 248~)
Suggests: network-manager | wpasupplicant, openvswitch-switch, iw
Breaks: nplan (<< 0.34~)
Conflicts: netplan
Description: YAML network configuration abstraction for various backends
 netplan reads YAML network configuration files which are written
 by administrators, installers, cloud image instantiations, or other OS
 deployments. During early boot it then generates backend specific
 configuration files in /run to hand off control of devices to a particular
 networking daemon.
 .
 Currently supported backends are networkd and NetworkManager.
Homepage: https://netplan.io/

Package: nftables
Status: install ok installed
Priority: important
Section: net
Installed-Size: 176
Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>
Architecture: amd64
Version: 1.0.6-2+deb12u2
Depends: libnftables1 (= 1.0.6-2+deb12u2), libc6 (>= 2.34), libedit2 (>= 3.1-20130611-0)
Recommends: netbase
Suggests: firewalld
Conffiles:
 /etc/nftables.conf 4d4241fcd44b9a69b74f69d571f35a20
Description: Program to control packet filtering rules by Netfilter project
 This software provides an in-kernel packet classification framework that is
 based on a network-specific Virtual Machine (VM) and the nft userspace
 command line tool. The nftables framework reuses the existing Netfilter
 subsystems such as the existing hook infrastructure, the connection tracking
 system, NAT, userspace queueing and logging subsystem.
 .
 nftables replaces the old popular iptables, ip6tables, arptables and ebtables.
 .
 Netfilter software and nftables in particular are used in applications such
 as Internet connection sharing, firewalls, IP accounting, transparent
 proxying, advanced routing and traffic control.
 .
 A Linux kernel >= 3.13 is required. However, >= 4.14 is recommended.
Homepage: https://www.netfilter.org/

Package: nmap
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 4434
Maintainer: Debian Security Tools <team+pkg-security@tracker.debian.org>
Architecture: amd64
Version: 7.93+dfsg1-1
Depends: nmap-common (= 7.93+dfsg1-1), libc6 (>= 2.34), libgcc-s1 (>= 3.0), liblinear4 (>= 2.01+dfsg), liblua5.3-0, libpcap0.8 (>= 1.5.1), libpcre3, libssh2-1 (>= 1.2.9), libssl3 (>= 3.0.0), libstdc++6 (>= 11), lua-lpeg (>= 1.0.2), zlib1g (>= 1:1.1.4)
Suggests: ncat, ndiff, zenmap
Description: The Network Mapper
 Nmap is a utility for network exploration or security auditing. It
 supports ping scanning (determine which hosts are up), many port
 scanning techniques, version detection (determine service protocols
 and application versions listening behind ports), and TCP/IP
 fingerprinting (remote host OS or device identification). Nmap also
 offers flexible target and port specification, decoy/stealth scanning,
 sunRPC scanning, and more. Most Unix and Windows platforms are
 supported in both GUI and commandline modes. Several popular handheld
 devices are also supported, including the Sharp Zaurus and the iPAQ.
Homepage: https://nmap.org/

Package: nmap-common
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 21188
Maintainer: Debian Security Tools <team+pkg-security@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Source: nmap
Version: 7.93+dfsg1-1
Recommends: nmap
Description: Architecture independent files for nmap
 Nmap is a utility for network exploration or security auditing. It
 supports ping scanning (determine which hosts are up), many port
 scanning techniques, version detection (determine service protocols
 and application versions listening behind ports), and TCP/IP
 fingerprinting (remote host OS or device identification). Nmap also
 offers flexible target and port specification, decoy/stealth scanning,
 sunRPC scanning, and more. Most Unix and Windows platforms are
 supported in both GUI and commandline modes. Several popular handheld
 devices are also supported, including the Sharp Zaurus and the iPAQ.
 .
 This package contains the nmap files shared by all architectures.
Homepage: https://nmap.org/

Package: ocl-icd-libopencl1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 140
Maintainer: Debian OpenCL Maintainers <pkg-opencl-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: ocl-icd
Version: 2.3.1-1
Replaces: amd-app, libopencl1, nvidia-libopencl1-dev
Provides: libopencl-1.1-1, libopencl-1.2-1, libopencl-2.0-1, libopencl-2.1-1, libopencl-2.2-1, libopencl-3.0-1, libopencl1
Depends: libc6 (>= 2.34)
Suggests: opencl-icd
Conflicts: amd-app, libopencl1, nvidia-libopencl1-dev
Description: Generic OpenCL ICD Loader
 OpenCL (Open Computing Language) is a multivendor open standard for
 general-purpose parallel programming of heterogeneous systems that include
 CPUs, GPUs and other processors.
 .
 This package contains an installable client driver loader (ICD Loader)
 library that can be used to load any (free or non-free) installable client
 driver (ICD) for OpenCL. It acts as a demultiplexer so several ICD can
 be installed and used together.
Homepage: https://github.com/OCL-dev/ocl-icd

Package: openssh-client
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 5801
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: openssh
Version: 1:9.2p1-2+deb12u10
Replaces: openssh-sk-helper, ssh, ssh-krb5
Provides: ssh-client
Depends: adduser, passwd, libc6 (>= 2.36), libedit2 (>= 2.11-20080614-0), libfido2-1 (>= 1.8.0), libgssapi-krb5-2 (>= 1.17), libselinux1 (>= 3.1~), libssl3 (>= 3.0.19), zlib1g (>= 1:1.1.4)
Recommends: xauth
Suggests: keychain, libpam-ssh, monkeysphere, ssh-askpass
Breaks: openssh-sk-helper
Conflicts: sftp
Conffiles:
 /etc/ssh/ssh_config 8a5bddc82befb71d8ef34cc903d3d077
Description: secure shell (SSH) client, for secure access to remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the ssh, scp and sftp clients, the ssh-agent
 and ssh-add programs to make public key authentication more convenient,
 and the ssh-keygen, ssh-keyscan, ssh-copy-id and ssh-argv0 utilities.
 .
 In some countries it may be illegal to use any encryption at all
 without a special permit.
 .
 ssh replaces the insecure rsh, rcp and rlogin programs, which are
 obsolete for most purposes.
Homepage: https://www.openssh.com/

Package: openssh-server
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 1930
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: openssh
Version: 1:9.2p1-2+deb12u10
Replaces: openssh-client (<< 1:7.9p1-8), ssh, ssh-krb5
Provides: ssh-server
Depends: adduser, libpam-modules, libpam-runtime, lsb-base, openssh-client (= 1:9.2p1-2+deb12u10), openssh-sftp-server, procps, ucf, debconf (>= 0.5) | debconf-2.0, runit-helper (>= 2.14.0~), libaudit1 (>= 1:2.2.1), libc6 (>= 2.36), libcom-err2 (>= 1.43.9), libcrypt1 (>= 1:4.1.0), libgssapi-krb5-2 (>= 1.17), libkrb5-3 (>= 1.13~alpha1+dfsg), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), libssl3 (>= 3.0.19), libsystemd0, libwrap0 (>= 7.6-4~), zlib1g (>= 1:1.1.4)
Pre-Depends: init-system-helpers (>= 1.54~)
Recommends: default-logind | logind | libpam-systemd, ncurses-term, xauth
Suggests: molly-guard, monkeysphere, ssh-askpass, ufw
Breaks: runit (<< 2.1.2-51~)
Conflicts: sftp, ssh-socks, ssh2
Conffiles:
 /etc/default/ssh 500e3cf069fe9a7b9936108eb9d9c035
 /etc/init.d/ssh 3649a6fe8c18ad1d5245fd91737de507
 /etc/pam.d/sshd 8b4c7a12b031424b2a9946881da59812
 /etc/ssh/moduli 1f68f6ab5e45958e61ff32297ea1c3ec
 /etc/sv/ssh/.meta/installed d41d8cd98f00b204e9800998ecf8427e
 /etc/sv/ssh/finish f5f032f6f3e569c821346294d410b636
 /etc/sv/ssh/log/run 63e0ec3e1080dafc68d6d71d42b150a9
 /etc/sv/ssh/run 411f69ac55d12f0c98998552846b1c78
 /etc/ufw/applications.d/openssh-server 486b78d54b93cc9fdc950c1d52ff479e
Description: secure shell (SSH) server, for secure access from remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the sshd server.
 .
 In some countries it may be illegal to use any encryption at all
 without a special permit.
 .
 sshd replaces the insecure rshd program, which is obsolete for most
 purposes.
Homepage: https://www.openssh.com/

Package: openssh-sftp-server
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 217
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: openssh
Version: 1:9.2p1-2+deb12u10
Replaces: openssh-server (<< 1:6.5p1-5)
Depends: openssh-client (= 1:9.2p1-2+deb12u10), libc6 (>= 2.34)
Recommends: openssh-server | ssh-server
Breaks: openssh-server (<< 1:6.5p1-5)
Enhances: openssh-server, ssh-server
Description: secure shell (SSH) sftp server module, for SFTP access from remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the SFTP server module for the SSH server. It
 is needed if you want to access your SSH server with SFTP. The SFTP
 server module also works with other SSH daemons like dropbear.
 .
 OpenSSH's sftp and sftp-server implement revision 3 of the SSH filexfer
 protocol described in:
 .
  http://www.openssh.com/txt/draft-ietf-secsh-filexfer-02.txt
 .
 Newer versions of the draft will not be supported, though some features
 are individually implemented as extensions.
Homepage: https://www.openssh.com/

Package: openssl
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 2310
Maintainer: Debian OpenSSL Team <pkg-openssl-devel@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: foreign
Version: 3.0.20-1~deb12u2
Depends: libc6 (>= 2.34), libssl3 (>= 3.0.9)
Suggests: ca-certificates
Conffiles:
 /etc/ssl/openssl.cnf fe1993ec22f6b8a46cb9706acd8fc68f
Description: Secure Sockets Layer toolkit - cryptographic utility
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 It contains the general-purpose command line binary /usr/bin/openssl,
 useful for cryptographic operations such as:
  * creating RSA, DH, and DSA key parameters;
  * creating X.509 certificates, CSRs, and CRLs;
  * calculating message digests;
  * encrypting and decrypting with ciphers;
  * testing SSL/TLS clients and servers;
  * handling S/MIME signed or encrypted mail.
Homepage: https://www.openssl.org/

Package: parted
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 122
Maintainer: Parted Maintainer Team <parted-maintainers@alioth-lists.debian.net>
Architecture: amd64
Multi-Arch: foreign
Version: 3.5-3
Depends: libc6 (>= 2.34), libparted2 (= 3.5-3), libreadline8 (>= 6.0), libtinfo6 (>= 6)
Suggests: parted-doc
Conflicts: parted-doc (<< 3.5-2~)
Description: disk partition manipulator
 GNU Parted is a program that allows you to create, destroy, resize,
 move, and copy disk partitions. This is useful for creating space
 for new operating systems, reorganizing disk usage, and copying data
 to new hard disks.
 .
 This package contains the binary and manual page. Further
 documentation is available in parted-doc.
 .
 Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS, and PC98
 partitioning formats, as well as a "loop" (raw disk) type which
 allows use on RAID/LVM. It can detect and remove ASFS/AFFS/APFS,
 Btrfs, ext2/3/4, FAT16/32, HFS, JFS, linux-swap, UFS, XFS, and ZFS
 file systems. Parted also has the ability to create and modify file
 systems of some of these types, but using it to perform file system
 operations is now deprecated.
 .
 The nature of this software means that any bugs could cause massive
 data loss. While there are no such bugs known at the moment, they
 could exist, so please back up all important files before running
 it, and do so at your own risk.
Homepage: https://www.gnu.org/software/parted

Package: passwd
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 2827
Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: shadow
Version: 1:4.13+dfsg1-1+deb12u2
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.36), libcrypt1 (>= 1:4.1.0), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), libsemanage2 (>= 2.0.32), libpam-modules
Recommends: sensible-utils
Conffiles:
 /etc/default/useradd e03965d134c26725cbc51a57969da6c9
 /etc/pam.d/chfn 4d466e00a348ba426130664d795e8afa
 /etc/pam.d/chpasswd 9900720564cb4ee98b7da29e2d183cb2
 /etc/pam.d/chsh a6e9b589e90009334ffd030d819290a6
 /etc/pam.d/newusers 1454e29bfa9f2a10836563e76936cea5
 /etc/pam.d/passwd eaf2ad85b5ccd06cceb19a3e75f40c63
Description: change and administer password and group data
 This package includes passwd, chsh, chfn, and many other programs to
 maintain password and group data.
 .
 Shadow passwords are supported.  See /usr/share/doc/passwd/README.Debian
Homepage: https://github.com/shadow-maint/shadow

Package: patch
Status: install ok installed
Priority: optional
Section: vcs
Installed-Size: 248
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.7.6-7
Depends: libc6 (>= 2.17)
Suggests: ed, diffutils-doc
Description: Apply a diff file to an original
 Patch will take a patch file containing any of the four forms
 of difference listing produced by the diff program and apply
 those differences to an original file, producing a patched
 version.
Homepage: https://savannah.gnu.org/projects/patch/

Package: pci.ids
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1343
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.0~2023.04.11-1
Replaces: pciutils (<< 1:3.6.2-4~)
Breaks: pciutils (<< 1:3.6.2-4~)
Description: PCI ID Repository
 This package contains the pci.ids file, a public repository of all known
 ID's used in PCI devices: ID's of vendors, devices, subsystems and device
 classes. It is used in various programs to display full human-readable
 names instead of cryptic numeric codes.
Homepage: https://pci-ids.ucw.cz/

Package: pciutils
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 210
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1:3.9.0-4
Depends: libc6 (>= 2.34), libkmod2 (>= 5~), libpci3 (= 1:3.9.0-4)
Suggests: bzip2, wget | curl | lynx
Description: PCI utilities
 This package contains various utilities for inspecting and setting of
 devices connected to the PCI bus.
Homepage: https://mj.ucw.cz/sw/pciutils/

Package: perl
Status: install ok installed
Priority: standard
Section: perl
Installed-Size: 670
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: amd64
Multi-Arch: allowed
Version: 5.36.0-7+deb12u3
Replaces: perl-base (<< 5.36.0-2), perl-modules (<< 5.22.0~)
Provides: libansicolor-perl (= 5.01), libarchive-tar-perl (= 2.40), libattribute-handlers-perl (= 1.02), libautodie-perl (= 2.34), libcompress-raw-bzip2-perl (= 2.103), libcompress-raw-zlib-perl (= 2.105), libcompress-zlib-perl (= 2.106), libcpan-meta-perl (= 2.150010), libcpan-meta-requirements-perl (= 2.140), libcpan-meta-yaml-perl (= 0.018), libdigest-md5-perl (= 2.58), libdigest-perl (= 1.20), libdigest-sha-perl (= 6.02), libencode-perl (= 3.17), libexperimental-perl (= 0.028), libextutils-cbuilder-perl (= 0.280236), libextutils-command-perl (= 7.64), libextutils-install-perl (= 2.20), libextutils-parsexs-perl (= 3.450000), libfile-spec-perl (= 3.8400), libhttp-tiny-perl (= 0.080), libi18n-langtags-perl (= 0.45), libio-compress-base-perl (= 2.106), libio-compress-bzip2-perl (= 2.106), libio-compress-perl (= 2.106), libio-compress-zlib-perl (= 2.106), libio-zlib-perl (= 1.11), libjson-pp-perl (= 4.07000), liblocale-maketext-perl (= 1.31), liblocale-maketext-simple-perl (= 0.21.01), libmath-bigint-perl (= 1.999830), libmath-complex-perl (= 1.5902), libmime-base64-perl (= 3.16), libmodule-corelist-perl (= 5.20220520), libmodule-load-conditional-perl (= 0.74), libmodule-load-perl (= 0.36), libmodule-metadata-perl (= 1.000037), libnet-perl (= 1:3.14), libnet-ping-perl (= 2.74), libparams-check-perl (= 0.38), libparent-perl (= 0.238), libparse-cpan-meta-perl (= 2.150010), libperl-ostype-perl (= 1.010), libpod-escapes-perl (= 1.07), libpod-simple-perl (= 3.43), libstorable-perl (= 3.26), libsys-syslog-perl (= 0.36), libtest-harness-perl (= 3.44), libtest-simple-perl (= 1.302190), libtest-tester-perl (= 1.302190), libtest-use-ok-perl (= 1.302190), libtext-balanced-perl (= 2.04), libthread-queue-perl (= 3.14), libthreads-perl (= 2.27), libthreads-shared-perl (= 1.64), libtime-hires-perl (= 1.9770), libtime-local-perl (= 1.3000), libtime-piece-perl (= 1.3401), libunicode-collate-perl (= 1.31), libversion-perl (= 1:0.9929), libversion-requirements-perl, podlators-perl (= 4.14)
Depends: perl-base (= 5.36.0-7+deb12u3), perl-modules-5.36 (>= 5.36.0-7+deb12u3), libperl5.36 (= 5.36.0-7+deb12u3)
Pre-Depends: dpkg (>= 1.17.17)
Recommends: netbase
Suggests: perl-doc, libterm-readline-gnu-perl | libterm-readline-perl-perl, make, libtap-harness-archive-perl
Breaks: apt-show-versions (<< 0.22.10), libdist-inkt-perl (<< 0.024-5), libmarc-charset-perl (<< 1.35-3), libperl-dev (<< 5.24.0~), perl-doc (<< 5.36.0-1), perl-modules-5.22, perl-modules-5.24, perl-modules-5.26 (<< 5.26.2-5)
Conflicts: libjson-pp-perl (<< 2.27200-2)
Conffiles:
 /etc/perl/Net/libnet.cfg fb2946cae573b8ed3d654a180d458733
Description: Larry Wall's Practical Extraction and Report Language
 Perl is a highly capable, feature-rich programming language with over
 20 years of development. Perl 5 runs on over 100 platforms from
 portables to mainframes. Perl is suitable for both rapid prototyping
 and large scale development projects.
 .
 Perl 5 supports many programming styles, including procedural,
 functional, and object-oriented. In addition to this, it is supported
 by an ever-growing collection of reusable modules which accelerate
 development. Some of these modules include Web frameworks, database
 integration, networking protocols, and encryption. Perl provides
 interfaces to C and C++ for custom extension development.
Homepage: http://dev.perl.org/perl5/

Package: perl-base
Essential: yes
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 7639
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: amd64
Source: perl
Version: 5.36.0-7+deb12u3
Replaces: libfile-path-perl (<< 2.18), libfile-temp-perl (<< 0.2311), libio-socket-ip-perl (<< 0.41), libscalar-list-utils-perl (<< 1:1.62), libsocket-perl (<< 2.033), libxsloader-perl (<< 0.31), perl (<< 5.10.1-12), perl-modules (<< 5.20.1-3)
Provides: libfile-path-perl (= 2.18), libfile-temp-perl (= 0.2311), libio-socket-ip-perl (= 0.41), libscalar-list-utils-perl (= 1:1.62), libsocket-perl (= 2.033), libxsloader-perl (= 0.31), perlapi-5.36.0
Pre-Depends: libc6 (>= 2.35), libcrypt1 (>= 1:4.1.0), dpkg (>= 1.17.17)
Suggests: perl, sensible-utils
Breaks: amanda-common (<< 1:3.3.9-2), backuppc (<< 4.4.0-7~), bucardo (<< 5.5.0-1.1), debconf (<< 1.5.61), dh-haskell (<< 0.3), duck (<< 0.14.1), intltool (<< 0.51.0-4), kio-perldoc (<< 20.04.1-1), latexml (<< 0.8.4-2), libdevel-mat-dumper-perl (<< 0.42-3), libencode-arabic-perl (<< 14.2-2), libexception-class-perl (<< 1.42), libfile-path-perl (<< 2.18), libfile-spec-perl (<< 3.8400), libfile-temp-perl (<< 0.2311), libio-socket-ip-perl (<< 0.41), libmp3-tag-perl (<< 1.13-1.2), libsbuild-perl (<< 0.67.0-1), libscalar-list-utils-perl (<< 1:1.62), libsocket-perl (<< 2.033), libxsloader-perl (<< 0.31), mailagent (<< 1:3.1-81-2), perl (<< 5.36.0~), perl-modules (<< 5.36.0~), pod2pdf (<< 0.42-5.1), slic3r (<< 1.2.9+dfsg-6.1), slic3r-prusa (<< 1.37.0+dfsg-1.1), texinfo (<< 6.1.0.dfsg.1-8)
Conflicts: defoma (<< 0.11.12), doc-base (<< 0.10.3), mono-gac (<< 2.10.8.1-3), safe-rm (<< 0.8), update-inetd (<< 4.41)
Description: minimal Perl system
 Perl is a scripting language used in many system scripts and utilities.
 .
 This package provides a Perl interpreter and the small subset of the
 standard run-time library required to perform basic tasks. For a full
 Perl installation, install "perl" (and its dependencies, "perl-modules-5.36"
 and "perl-doc").
Homepage: http://dev.perl.org/perl5/

Package: perl-modules-5.36
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 17817
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: all
Multi-Arch: foreign
Source: perl
Version: 5.36.0-7+deb12u3
Replaces: libansicolor-perl (<< 5.01), libarchive-tar-perl (<< 2.40), libattribute-handlers-perl (<< 1.02), libautodie-perl (<< 2.34), libcpan-meta-perl (<< 2.150010), libcpan-meta-requirements-perl (<< 2.140), libcpan-meta-yaml-perl (<< 0.018), libdigest-perl (<< 1.20), libexperimental-perl (<< 0.028), libextutils-cbuilder-perl (<< 0.280236), libextutils-command-perl (<< 7.64), libextutils-install-perl (<< 2.20), libextutils-parsexs-perl (<< 3.450000), libfile-spec-perl (<< 3.8400), libhttp-tiny-perl (<< 0.080), libi18n-langtags-perl (<< 0.45), libio-zlib-perl (<< 1.11), libjson-pp-perl (<< 4.07000), liblocale-maketext-perl (<< 1.31), liblocale-maketext-simple-perl (<< 0.21.01), libmath-bigint-perl (<< 1.999830), libmath-complex-perl (<< 1.5902), libmodule-corelist-perl (<< 5.20220520), libmodule-load-conditional-perl (<< 0.74), libmodule-load-perl (<< 0.36), libmodule-metadata-perl (<< 1.000037), libnet-perl (<< 1:3.14), libnet-ping-perl (<< 2.74), libparams-check-perl (<< 0.38), libparent-perl (<< 0.238), libparse-cpan-meta-perl (<< 2.150010), libperl-ostype-perl (<< 1.010), libpod-escapes-perl (<< 1.07), libpod-simple-perl (<< 3.43), libtest-harness-perl (<< 3.44), libtest-simple-perl (<< 1.302190), libtest-tester-perl (<< 1.302190), libtest-use-ok-perl (<< 1.302190), libtext-balanced-perl (<< 2.04), libthread-queue-perl (<< 3.14), libtime-local-perl (<< 1.3000), libunicode-collate-perl (<< 1.31), libversion-perl (<< 1:0.9929), perl-base (<< 5.22.0~), perl-modules, podlators-perl (<< 4.14)
Provides: perl-modules
Depends: perl-base (>= 5.36.0-1)
Pre-Depends: dpkg (>= 1.17.17)
Recommends: perl (>= 5.36.0-1)
Breaks: libansicolor-perl (<< 5.01), libarchive-tar-perl (<< 2.40), libattribute-handlers-perl (<< 1.02), libautodie-perl (<< 2.34), libcpan-meta-perl (<< 2.150010), libcpan-meta-requirements-perl (<< 2.140), libcpan-meta-yaml-perl (<< 0.018), libdigest-perl (<< 1.20), libexperimental-perl (<< 0.028), libextutils-cbuilder-perl (<< 0.280236), libextutils-command-perl (<< 7.64), libextutils-install-perl (<< 2.20), libextutils-parsexs-perl (<< 3.450000), libfile-spec-perl (<< 3.8400), libhttp-tiny-perl (<< 0.080), libi18n-langtags-perl (<< 0.45), libio-zlib-perl (<< 1.11), libjson-pp-perl (<< 4.07000), liblocale-maketext-perl (<< 1.31), liblocale-maketext-simple-perl (<< 0.21.01), libmath-bigint-perl (<< 1.999830), libmath-complex-perl (<< 1.5902), libmodule-corelist-perl (<< 5.20220520), libmodule-load-conditional-perl (<< 0.74), libmodule-load-perl (<< 0.36), libmodule-metadata-perl (<< 1.000037), libnet-perl (<< 1:3.14), libnet-ping-perl (<< 2.74), libparams-check-perl (<< 0.38), libparent-perl (<< 0.238), libparse-cpan-meta-perl (<< 2.150010), libperl-ostype-perl (<< 1.010), libpod-escapes-perl (<< 1.07), libpod-simple-perl (<< 3.43), libtest-harness-perl (<< 3.44), libtest-simple-perl (<< 1.302190), libtest-tester-perl (<< 1.302190), libtest-use-ok-perl (<< 1.302190), libtext-balanced-perl (<< 2.04), libthread-queue-perl (<< 3.14), libtime-local-perl (<< 1.3000), libunicode-collate-perl (<< 1.31), libversion-perl (<< 1:0.9929), maildirsync (<< 1.2-2.1), perl (<< 5.36.0~), podlators-perl (<< 4.14)
Conflicts: perl-modules (<< 5.22.0~)
Description: Core Perl modules
 Architecture independent Perl modules.  These modules are part of Perl and
 required if the `perl' package is installed.
 .
 Note that this package only exists to save archive space and should be
 considered an internal implementation detail of the `perl' package.
 Other packages should not depend on `perl-modules-5.36' directly, they
 should use `perl' (which depends on `perl-modules-5.36') instead.
Homepage: http://dev.perl.org/perl5/

Package: php
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 10
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Source: php-defaults (93)
Version: 2:8.2+93
Depends: php8.2
Description: server-side, HTML-embedded scripting language (default)
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
 .
 This package is a dependency package, which depends on latest stable
 PHP version (currently 8.2).

Package: php-apcu
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 13
Maintainer: Debian PHP PECL Maintainers <team+php-pecl@tracker.debian.org>
Architecture: amd64
Version: 5.1.22+4.0.11-2
Depends: php8.2-apcu
Pre-Depends: php-common (>= 2:69~)
Suggests: php-gd
Conflicts: php-xcache, php-yac
Description: APC User Cache for PHP
 The APCu is userland caching: APC (Alternative PHP Cache) stripped of
 opcode caching after the deployment of Zend OpCache in PHP 5.5 as the
 primary solution to opcode caching in future versions of PHP.
 .
 The APCu is a fast solution for userland caching (and dumping) of PHP
 variables locally, it is not distributed like MemcacheD, but they can
 be used together for optimal caching.
 .
 This is empty package that depends on default PHP version.
Homepage: https://pecl.php.net/package/APCu

Package: php-bcmath
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 10
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Source: php-defaults (93)
Version: 2:8.2+93
Depends: php-common, php8.2-bcmath
Description: Bcmath module for PHP [default]
 This package provides a Bcmath module for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
 .
 This package is a dependency package, which depends on Debian's default
 PHP version (currently 8.2).

Package: php-cli
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 21
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Source: php-defaults (93)
Version: 2:8.2+93
Depends: php8.2-cli
Description: command-line interpreter for the PHP scripting language (default)
 This package provides the /usr/bin/php command interpreter, useful for
 testing PHP scripts from a shell or performing general shell scripting tasks.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
 .
 This package is a dependency package, which depends on latest stable
 PHP version (currently 8.2).

Package: php-common
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 70
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Source: php-defaults (93)
Version: 2:93
Depends: psmisc (>= 22.15-1~)
Breaks: php-amqp (<< 1.11.0-4~), php-apcu (<< 5.1.21+4.0.11-7~), php-ast (<< 1.0.16-4~), php-ds (<< 1.4.0-4~), php-facedetect (<< 1.1.0-19-g135c72a-10~), php-gearman (<< 2.1.0+1.1.2-11~), php-gmagick (<< 2.0.6~rc1+1.1.7~rc3-10~), php-gnupg (<< 1.5.0-6~), php-igbinary (<< 3.2.6+2.0.8-6~), php-imagick (<< 3.6.0-4~), php-libvirt-php (<< 0.5.5-16~), php-lua (<< 2.0.7+1.1.0-13~), php-mailparse (<< 3.1.2+2.1.7~dev20160128-7~), php-memcache (<< 8.0+4.0.5.2+3.0.9~20170802.e702b5f9+-7~), php-memcached (<< 3.1.5+2.2.0-14~), php-mongodb (<< 1.12.0+1.9.2+1.7.5-4~), php-msgpack (<< 2.2.0~rc1+2.1.2+0.5.7-6~), php-mysqlnd-ms (<< 1.6.0+svn333622-15~), php-oauth (<< 2.0.7+1.2.3-14~), php-pcov (<< 1.0.11-4~), php-pecl-http (<< 4.2.1+php8-2~), php-ps (<< 1.4.4+1.3.7-6~), php-psr (<< 1.2.0-4~), php-radius (<< 1.4.0~b1-22~), php-raphf (<< 2.0.1+1.1.2-13~), php-redis (<< 5.3.5+4.3.0-5~), php-rrd (<< 2.0.3+1.1.3-6~), php-smbclient (<< 1.0.6-6~), php-ssh2 (<< 1.3.1+0.13-6~), php-stomp (<< 2.0.2+1.0.9-15~), php-tideways (<< 5.0.4-13~), php-uopz (<< 7.1.1+6.1.2-5~), php-uploadprogress (<< 2.0.2+1.1.4-6~), php-uuid (<< 1.2.0-11~), php-xdebug (<< 3.1.2+2.9.8+2.8.1+2.5.5-4~), php-xmlrpc (<< 3:1.0.0~rc3-4~), php-yac (<< 2.3.1+0.9.2-4~), php-yaml (<< 2.2.2+2.1.0+2.0.4+1.3.2-5~), php-zmq (<< 1.1.3-23~), php5.6-common, php5.6-json (<< 1.3.9-2~), php7.0-common, php7.1-common, php7.2-common, php7.3-common, php7.4-common, php8.0-common, php8.1-common
Conffiles:
 /etc/cron.d/php e6fa2d74078ac0ac6fd730decf3b3736
Description: Common files for PHP packages
 This package contains common utilities shared among all packaged PHP
 versions.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.

Package: php-curl
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 10
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Source: php-defaults (93)
Version: 2:8.2+93
Depends: php-common, php8.2-curl
Description: CURL module for PHP [default]
 This package provides a CURL module for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
 .
 This package is a dependency package, which depends on Debian's default
 PHP version (currently 8.2).

Package: php-gd
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 10
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Source: php-defaults (93)
Version: 2:8.2+93
Depends: php-common, php8.2-gd
Description: GD module for PHP [default]
 This package provides a GD module for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
 .
 This package is a dependency package, which depends on Debian's default
 PHP version (currently 8.2).

Package: php-gmp
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 10
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Source: php-defaults (93)
Version: 2:8.2+93
Depends: php-common, php8.2-gmp
Description: GMP module for PHP [default]
 This package provides a GMP module for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
 .
 This package is a dependency package, which depends on Debian's default
 PHP version (currently 8.2).

Package: php-imagick
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 17
Maintainer: Debian PHP PECL Maintainers <team+php-pecl@tracker.debian.org>
Architecture: amd64
Version: 3.7.0-4
Depends: php8.2-imagick
Pre-Depends: php-common (>= 2:69~)
Recommends: fonts-dejavu-core, ghostscript
Description: Provides a wrapper to the ImageMagick library
 Imagick is a native php extension to create and modify images using the
 ImageMagick API.
 .
 This is empty package that depends on default PHP version.
Homepage: http://pecl.php.net/package/imagick

Package: php-intl
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 10
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Source: php-defaults (93)
Version: 2:8.2+93
Depends: php-common, php8.2-intl
Description: Internationalisation module for PHP [default]
 This package provides a Internationalisation module for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
 .
 This package is a dependency package, which depends on Debian's default
 PHP version (currently 8.2).

Package: php-json
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 10
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Source: php-defaults (93)
Version: 2:8.2+93
Depends: php-common, php8.2-json
Description: JSON module for PHP [default]
 This package provides a JSON module for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
 .
 This package is a dependency package, which depends on Debian's default
 PHP version (currently 8.2).

Package: php-ldap
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 10
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Source: php-defaults (93)
Version: 2:8.2+93
Depends: php-common, php8.2-ldap
Description: LDAP module for PHP [default]
 This package provides a LDAP module for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
 .
 This package is a dependency package, which depends on Debian's default
 PHP version (currently 8.2).

Package: php-mbstring
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 10
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Source: php-defaults (93)
Version: 2:8.2+93
Depends: php-common, php8.2-mbstring
Description: MBSTRING module for PHP [default]
 This package provides a MBSTRING module for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
 .
 This package is a dependency package, which depends on Debian's default
 PHP version (currently 8.2).

Package: php-mysql
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 10
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Source: php-defaults (93)
Version: 2:8.2+93
Depends: php-common, php8.2-mysql
Description: MySQL module for PHP [default]
 This package provides a MySQL module for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
 .
 This package is a dependency package, which depends on Debian's default
 PHP version (currently 8.2).

Package: php-redis
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 13
Maintainer: Debian PHP PECL Maintainers <team+php-pecl@tracker.debian.org>
Architecture: amd64
Version: 5.3.7+4.3.0-3
Depends: php8.2-redis, php-igbinary
Pre-Depends: php-common (>= 2:69~)
Suggests: redis-server
Description: PHP extension for interfacing with Redis
 This extension allows php applications to communicate with the Redis
 persistent key-value store.  The php-redis module provides an easy
 object oriented interface.
 .
 This is empty package that depends on default PHP version.
Homepage: https://pecl.php.net/package/redis

Package: php-xml
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 10
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Source: php-defaults (93)
Version: 2:8.2+93
Depends: php-common, php8.2-xml
Description: DOM, SimpleXML, WDDX, XML, and XSL module for PHP [default]
 This package provides a DOM, SimpleXML, WDDX, XML, and XSL module for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
 .
 This package is a dependency package, which depends on Debian's default
 PHP version (currently 8.2).

Package: php-zip
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 10
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Source: php-defaults (93)
Version: 2:8.2+93
Depends: php-common, php8.2-zip
Description: Zip module for PHP [default]
 This package provides a Zip module for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
 .
 This package is a dependency package, which depends on Debian's default
 PHP version (currently 8.2).

Package: php8.2
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 82
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: all
Version: 8.2.33-1~deb12u1
Provides: php
Depends: libapache2-mod-php8.2 | php8.2-fpm | php8.2-cgi, php8.2-common
Description: server-side, HTML-embedded scripting language (metapackage)
 This package is a metapackage that, when installed, guarantees that you
 have at least one of the four server-side versions of the PHP interpreter
 installed. Removing this package won't remove PHP from your system, however
 it may remove other packages that depend on this one.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.2-apcu
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 174
Maintainer: Debian PHP PECL Maintainers <team+php-pecl@tracker.debian.org>
Architecture: amd64
Source: php-apcu
Version: 5.1.22+4.0.11-2
Replaces: php-apcu (<< 5.1.22+4.0.11-2~)
Provides: php-apcu
Depends: php8.2-common, phpapi-20220829, libc6 (>= 2.34)
Pre-Depends: php-common (>= 2:69~)
Suggests: php-gd
Breaks: php-apcu (<< 5.1.22+4.0.11-2~)
Conflicts: php-xcache, php-yac
Conffiles:
 /etc/php/8.2/mods-available/apcu.ini 63cdaa57c6c9a68ce51c0862bc1b74a0
Description: APC User Cache for PHP
 The APCu is userland caching: APC (Alternative PHP Cache) stripped of
 opcode caching after the deployment of Zend OpCache in PHP 5.5 as the
 primary solution to opcode caching in future versions of PHP.
 .
 The APCu is a fast solution for userland caching (and dumping) of PHP
 variables locally, it is not distributed like MemcacheD, but they can
 be used together for optimal caching.
Homepage: https://pecl.php.net/package/APCu

Package: php8.2-bcmath
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 68
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.33-1~deb12u1
Provides: php-bcmath
Depends: php-common (>= 1:81~), ucf, php8.2-common (= 8.2.33-1~deb12u1), libc6 (>= 2.14)
Description: Bcmath module for PHP
 This package provides the Bcmath module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.2-cli
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 5585
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.33-1~deb12u1
Provides: php-cli, php-json, php8.2-json, phpapi-20220829
Depends: libedit2 (>= 2.11-20080614-4), libmagic1, media-types | mime-support, php8.2-common (= 8.2.33-1~deb12u1), php8.2-opcache, php8.2-readline, tzdata, ucf, libargon2-1 (>= 0~20171227), libc6 (>= 2.35), libpcre2-8-0 (>= 10.32), libsodium23 (>= 1.0.18), libssl3 (>= 3.0.0), libxml2 (>= 2.8.0), zlib1g (>= 1:1.1.4)
Suggests: php-pear
Description: command-line interpreter for the PHP scripting language
 This package provides the /usr/bin/php8.2 command interpreter, useful for
 testing PHP scripts from a shell or performing general shell scripting tasks.
 .
 The following extensions are built in: Core date filter hash json libxml
 openssl pcntl pcre random Reflection session sodium SPL standard zlib.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.2-common
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 8449
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.33-1~deb12u1
Provides: php-calendar, php-ctype, php-exif, php-ffi, php-fileinfo, php-ftp, php-iconv, php-pdo, php-phar, php-posix, php-shmop, php-sockets, php-sysvmsg, php-sysvsem, php-sysvshm, php-tokenizer, php8.2-calendar, php8.2-ctype, php8.2-exif, php8.2-ffi, php8.2-fileinfo, php8.2-ftp, php8.2-gettext, php8.2-iconv, php8.2-pdo, php8.2-phar, php8.2-posix, php8.2-shmop, php8.2-sockets, php8.2-sysvmsg, php8.2-sysvsem, php8.2-sysvshm, php8.2-tokenizer
Depends: php-common (>= 1:81~), ucf, libc6 (>= 2.34), libffi8 (>= 3.4), libssl3 (>= 3.0.0)
Breaks: gforge-common (<< 6), php7.0-curl (<< 7.0.33-1~), php7.2-sodium (<< 7.2.12~)
Description: documentation, examples and common module for PHP
 This package provides the documentation, examples and common module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.2-curl
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 148
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.33-1~deb12u1
Provides: php-curl
Depends: php-common (>= 1:81~), ucf, php8.2-common (= 8.2.33-1~deb12u1), libc6 (>= 2.14), libcurl4 (>= 7.63.0)
Breaks: php7.0-curl (<< 7.0.33-1~)
Description: CURL module for PHP
 This package provides the CURL module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.2-gd
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 136
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.33-1~deb12u1
Provides: php-gd
Depends: php-common (>= 1:81~), ucf, php8.2-common (= 8.2.33-1~deb12u1), libc6 (>= 2.4), libgd3 (>= 2.3.3)
Description: GD module for PHP
 This package provides the GD module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.2-gmp
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 104
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.33-1~deb12u1
Provides: php-gmp
Depends: php-common (>= 1:81~), ucf, php8.2-common (= 8.2.33-1~deb12u1), libc6 (>= 2.4), libgmp10 (>= 2:6.2.1+dfsg1)
Description: GMP module for PHP
 This package provides the GMP module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.2-igbinary
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 117
Maintainer: Debian PHP PECL Maintainers <team+php-pecl@tracker.debian.org>
Architecture: amd64
Source: php-igbinary
Version: 3.2.13-1
Replaces: php-igbinary (<< 3.2.13-1~)
Provides: php-igbinary
Depends: php8.2-common, phpapi-20220829, libc6 (>= 2.14)
Pre-Depends: php-common (>= 2:69~)
Breaks: php-igbinary (<< 3.2.13-1~)
Conffiles:
 /etc/php/8.2/mods-available/igbinary.ini 14c4abd8fcffef929339f328f10f6e80
Description: igbinary PHP serializer
 Igbinary is a drop in replacement for the standard PHP serializer.
 Instead of time and space consuming textual representation, igbinary
 stores PHP data structures in a compact binary form.  Savings are
 significant when using memcached or similar memory based storages for
 serialized data.
Homepage: http://pecl.php.net/package/igbinary

Package: php8.2-imagick
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 480
Maintainer: Debian PHP PECL Maintainers <team+php-pecl@tracker.debian.org>
Architecture: amd64
Source: php-imagick
Version: 3.7.0-4
Replaces: php-imagick (<< 3.7.0-4~)
Provides: php-imagick
Depends: php8.2-common, phpapi-20220829, libc6 (>= 2.33), libgomp1 (>= 9), libmagickcore-6.q16-6 (>= 8:6.9.10.2), libmagickwand-6.q16-6 (>= 8:6.9.10.2)
Pre-Depends: php-common (>= 2:69~)
Recommends: fonts-dejavu-core, ghostscript
Breaks: php-imagick (<< 3.7.0-4~)
Conffiles:
 /etc/php/8.2/mods-available/imagick.ini 5dc8a9511b4fa405099723d80b21b5de
Description: Provides a wrapper to the ImageMagick library
 Imagick is a native php extension to create and modify images using the
 ImageMagick API.
Homepage: http://pecl.php.net/package/imagick

Package: php8.2-intl
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 596
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.33-1~deb12u1
Provides: php-intl
Depends: php-common (>= 1:81~), ucf, php8.2-common (= 8.2.33-1~deb12u1), libc6 (>= 2.14), libgcc-s1 (>= 3.0), libicu72 (>= 72.1~rc-1~), libstdc++6 (>= 4.3)
Description: Internationalisation module for PHP
 This package provides the Internationalisation module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.2-ldap
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 128
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.33-1~deb12u1
Provides: php-ldap
Depends: php-common (>= 1:81~), ucf, php8.2-common (= 8.2.33-1~deb12u1), libc6 (>= 2.14), libldap-2.5-0 (>= 2.5.4)
Description: LDAP module for PHP
 This package provides the LDAP module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.2-mbstring
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 1194
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.33-1~deb12u1
Provides: php-mbstring
Depends: php-common (>= 1:81~), ucf, php8.2-common (= 8.2.33-1~deb12u1), libc6 (>= 2.14), libonig5 (>= 6.8.1)
Description: MBSTRING module for PHP
 This package provides the MBSTRING module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.2-mysql
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 451
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.33-1~deb12u1
Provides: php-mysqli, php-mysqlnd, php-pdo-mysql, php8.2-mysqli, php8.2-mysqlnd, php8.2-pdo-mysql
Depends: php-common (>= 1:81~), ucf, php8.2-common (= 8.2.33-1~deb12u1), libc6 (>= 2.15)
Description: MySQL module for PHP
 This package provides the MySQL module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.2-opcache
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 1028
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.33-1~deb12u1
Provides: php-opcache
Depends: php-common (>= 1:81~), ucf, php8.2-common (= 8.2.33-1~deb12u1), libc6 (>= 2.34), libgcc-s1 (>= 3.3)
Description: Zend OpCache module for PHP
 This package provides the Zend OpCache module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.2-readline
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 64
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.33-1~deb12u1
Provides: php-readline
Depends: php-common (>= 1:81~), ucf, php8.2-common (= 8.2.33-1~deb12u1), libc6 (>= 2.34), libedit2 (>= 3.1-20160903-0)
Description: readline module for PHP
 This package provides the readline module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.2-redis
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 672
Maintainer: Debian PHP PECL Maintainers <team+php-pecl@tracker.debian.org>
Architecture: amd64
Source: php-redis
Version: 5.3.7+4.3.0-3
Replaces: php-redis (<< 5.3.7+4.3.0-3~)
Provides: php-redis
Depends: php8.2-common, php8.2-igbinary, phpapi-20220829, libc6 (>= 2.14), liblz4-1 (>= 0.0~r130), libzstd1 (>= 1.5.2)
Pre-Depends: php-common (>= 2:69~)
Suggests: redis-server
Breaks: php-redis (<< 5.3.7+4.3.0-3~)
Conffiles:
 /etc/php/8.2/mods-available/redis.ini e9ee56ccb1ac17cef91a51375dc24947
Description: PHP extension for interfacing with Redis
 This extension allows php applications to communicate with the Redis
 persistent key-value store.  The php-redis module provides an easy
 object oriented interface.
Homepage: https://pecl.php.net/package/redis

Package: php8.2-xml
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 469
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.33-1~deb12u1
Replaces: php8.2-xsl (<< 7.0.3-6~)
Provides: php-dom, php-simplexml, php-xml, php-xmlreader, php-xmlwriter, php-xsl, php8.2-dom, php8.2-simplexml, php8.2-xmlreader, php8.2-xmlwriter, php8.2-xsl
Depends: php-common (>= 1:81~), ucf, php8.2-common (= 8.2.33-1~deb12u1), libc6 (>= 2.33), libxml2 (>= 2.9.0), libxslt1.1 (>= 1.1.25)
Breaks: php8.2-xsl (<< 7.0.3-6~)
Description: DOM, SimpleXML, XML, and XSL module for PHP
 This package provides the DOM, SimpleXML, XML, and XSL module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: php8.2-zip
Status: install ok installed
Priority: optional
Section: php
Installed-Size: 120
Maintainer: Debian PHP Maintainers <team+pkg-php@tracker.debian.org>
Architecture: amd64
Source: php8.2
Version: 8.2.33-1~deb12u1
Provides: php-zip
Depends: php-common (>= 1:81~), ucf, php8.2-common (= 8.2.33-1~deb12u1), libc6 (>= 2.33), libzip4 (>= 1.7.0)
Description: Zip module for PHP
 This package provides the Zip module(s) for PHP.
 .
 PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely-used
 open source general-purpose scripting language that is especially suited
 for web development and can be embedded into HTML.
Homepage: http://www.php.net/

Package: pigz
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 158
Maintainer: Eduard Bloch <blade@debian.org>
Architecture: amd64
Version: 2.6-1
Depends: libc6 (>= 2.29), zlib1g (>= 1:1.2.6)
Pre-Depends: dpkg (>= 1.15.6)
Description: Parallel Implementation of GZip
 pigz, which stands for Parallel Implementation of GZip, is a fully functional
 replacement for gzip that takes advantage of multiple processors and multiple
 cores when compressing data.
Homepage: http://zlib.net/pigz/

Package: pinentry-curses
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 140
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: pinentry
Version: 1.2.1-1
Provides: pinentry
Depends: libassuan0 (>= 2.1.0), libc6 (>= 2.34), libgpg-error0 (>= 1.16), libncursesw6 (>= 6), libtinfo6 (>= 6)
Suggests: pinentry-doc
Enhances: gnupg-agent
Description: curses-based PIN or pass-phrase entry dialog for GnuPG
 This package contains a program that allows for secure entry of PINs or
 pass phrases.  That means it tries to take care that the entered
 information is not swapped to disk or temporarily stored anywhere.
 This functionality is particularly useful for entering pass phrases
 when using encryption software such as GnuPG or e-mail clients using
 the same.  It uses an open protocol and is therefore not tied to
 particular software.
 .
 The program contained in this package implements a PIN entry dialog
 using the curses tool kit, meaning that it is useful for users
 working in text mode without the X Window System.  There are sibling
 packages that implement PIN entry dialogs that use an X tool kit.  If
 you install any of the graphical packages then this package is not
 necessary because the sibling packages automatically fall back to
 text mode if X is not active.
Homepage: https://www.gnupg.org/related_software/pinentry/

Package: pkg-config
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 29
Maintainer: Andrej Shadura <andrewsh@debian.org>
Architecture: amd64
Multi-Arch: same
Source: pkgconf
Version: 1.8.1-1
Depends: pkgconf (>= 1.8.0-7~)
Conffiles:
 /etc/dpkg/dpkg.cfg.d/pkg-config-hook-config newconffile remove-on-upgrade
Description: manage compile and link flags for libraries (transitional package)
 pkgconf is an implementation of the pkg-config system, which helps to configure
 compiler and linker flags for development frameworks.
 .
 pkgconf is a replacement for pkg-config, providing additional functionality
 while also maintaining compatibility.
 .
 This package only provides a dependency link to the pkgconf package to help
 with package upgrades. It can be safely removed.
Homepage: http://pkgconf.org/

Package: pkgconf
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 65
Maintainer: Andrej Shadura <andrewsh@debian.org>
Architecture: amd64
Multi-Arch: same
Version: 1.8.1-1
Replaces: pkg-config (<< 1.8)
Provides: pkg-config (= 1.8.1-1)
Depends: pkgconf-bin
Breaks: pkg-config (<< 1.8)
Conffiles:
 /etc/dpkg/dpkg.cfg.d/pkgconf-hook-config newconffile remove-on-upgrade
Description: manage compile and link flags for libraries
 pkgconf is an implementation of the pkg-config system, which helps to configure
 compiler and linker flags for development frameworks.
 .
 pkgconf is a replacement for pkg-config, providing additional functionality
 while also maintaining compatibility.
Homepage: http://pkgconf.org/

Package: pkgconf-bin
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 81
Maintainer: Andrej Shadura <andrewsh@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: pkgconf
Version: 1.8.1-1
Replaces: pkg-config (<< 1.8), pkgconf (<< 1.8.0-2~)
Depends: libc6 (>= 2.34), libpkgconf3 (>= 1.8.0)
Breaks: pkgconf (<< 1.8.0-2~)
Description: manage compile and link flags for libraries (binaries)
 pkgconf is an implementation of the pkg-config system, which helps to configure
 compiler and linker flags for development frameworks.
 .
 pkgconf is a replacement for pkg-config, providing additional functionality
 while also maintaining compatibility.
 .
 This package contains the pkgconf binary and related files.
Homepage: http://pkgconf.org/

Package: pocketsphinx-en-us
Status: install ok installed
Priority: optional
Section: sound
Installed-Size: 36991
Maintainer: Debian Accessibility Team <pkg-a11y-devel@alioth-lists.debian.net>
Architecture: all
Multi-Arch: foreign
Source: pocketsphinx
Version: 0.8+5prealpha+1-15
Description: Speech recognition tool - US English language model
 CMU Sphinx is a large vocabulary, speaker-independent continuous speech
 recognition engine.
 .
 This package contains the default US English language model for
 PocketSphinx.
Homepage: http://cmusphinx.sourceforge.net/

Package: polkitd
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 470
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: policykit-1
Version: 122-3
Replaces: policykit-1 (<< 0.120-4~), polkitd-javascript (<< 121+compat0.1-3~)
Depends: adduser | systemd-sysusers, default-dbus-system-bus | dbus-system-bus, default-logind | logind, xml-core (>= 0.14), libc6 (>= 2.34), libduktape207 (>= 2.0.3), libexpat1 (>= 2.0.1), libglib2.0-0 (>= 2.37.3), libpam0g (>= 0.99.7.1), libpolkit-agent-1-0 (= 122-3), libpolkit-gobject-1-0 (= 122-3), libsystemd0 (>= 213)
Suggests: polkitd-pkla (>= 121+compat0.1)
Breaks: policykit-1 (<< 0.120-4~), polkitd-javascript (<< 121+compat0.1-3~)
Description: framework for managing administrative policies and privileges
 polkit is an application-level toolkit for defining and handling the policy
 that allows unprivileged processes to speak to privileged processes.
 It was previously named PolicyKit.
 .
 It is a framework for centralizing the decision making process with respect to
 granting access to privileged operations for unprivileged (desktop)
 applications.
 .
 In a typical use of polkit, an unprivileged application such as gnome-disks
 sends requests via D-Bus or other inter-process communication mechanisms
 to a privileged system service such as udisks, which asks polkitd for
 permission to process those requests. This allows the application to carry
 out privileged tasks without making use of setuid, which avoids several
 common sources of security vulnerabilities.
 .
 This package provides the polkitd D-Bus service and supporting programs.
 The pkexec program is not included, and can be found in the pkexec package.
Homepage: https://www.freedesktop.org/wiki/Software/polkit/

Package: poppler-data
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 13086
Maintainer: Hideki Yamane <henrich@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.4.12-1
Pre-Depends: dpkg (>= 1.15.6~)
Suggests: poppler-utils, ghostscript, fonts-japanese-mincho | fonts-ipafont-mincho, fonts-japanese-gothic | fonts-ipafont-gothic, fonts-arphic-ukai, fonts-arphic-uming, fonts-nanum (>= 20131007~)
Enhances: ghostscript
Conffiles:
 /etc/ghostscript/cidfmap.d/90gs-cjk-resource-cns1.conf d3a491137506a332ab747c571e5bee33
 /etc/ghostscript/cidfmap.d/90gs-cjk-resource-gb1.conf 5ec7d7edc178ef73b1f6ac21a3cdc8a0
 /etc/ghostscript/cidfmap.d/90gs-cjk-resource-japan1.conf 9502944d3a420a2763a36517679460f4
 /etc/ghostscript/cidfmap.d/90gs-cjk-resource-japan2.conf 00d6b53125e159d61e2fd0a5056b4b4c
 /etc/ghostscript/cidfmap.d/90gs-cjk-resource-korea1.conf 76ba5a8a08376075902594b9ecd902ed
Description: encoding data for the poppler PDF rendering library
 This package provides the CMap tables required to display PDF documents
 containing CJK characters with libpoppler. They were previously provided
 by the packages cmap-adobe-{cns1,gb1,japan1,japan2,korea1} and
 gs-cjk-resource.
 .
 Users who want to view or create PDF files in Chinese, Japanese, or
 Korean without embedded fonts will need this package.
Homepage: https://poppler.freedesktop.org/

Package: procps
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 2091
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2:4.0.2-3
Replaces: manpages-de (<< 4.9.1-2), manpages-fr (<< 4.9.1-2), manpages-fr-extra (<< 20151231+nmu1), manpages-pl (<< 1:4.9.1-2)
Provides: watch
Depends: libc6 (>= 2.34), libncursesw6 (>= 6), libproc2-0 (>= 2:4.0.2), libtinfo6 (>= 6), init-system-helpers (>= 1.29~)
Recommends: psmisc
Breaks: guymager (<= 0.5.9-1), manpages-de (<< 4.9.1-2), manpages-fr (<< 4.9.1-2), manpages-fr-extra (<< 20151231+nmu1), manpages-pl (<< 1:4.9.1-2), open-vm-tools (<= 2011.12.20-562307-1)
Conffiles:
 /etc/init.d/procps f9903aa0d9f2f10714269befb4cdba8f
 /etc/sysctl.conf c0c09cba30da0565737cace8000d64ee
 /etc/sysctl.d/README.sysctl 48e64ce233c8aba8e0693adf8cf4c464
Description: /proc file system utilities
 This package provides command line and full screen utilities for browsing
 procfs, a "pseudo" file system dynamically generated by the kernel to
 provide information about the status of entries in its process table
 (such as whether the process is running, stopped, or a "zombie").
 .
 It contains free, kill, pkill, pgrep, pmap, ps, pwdx, skill, slabtop,
 snice, sysctl, tload, top, uptime, vmstat, w, and watch.
Homepage: https://gitlab.com/procps-ng/procps

Package: progress
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 82
Maintainer: Stephen Kitt <skitt@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 0.16-2
Depends: libc6 (>= 2.34), libncurses6 (>= 6), libtinfo6 (>= 6)
Description: Coreutils Progress Viewer (formerly known as 'cv')
 This tool can be described as a Tiny, Dirty, Linux-and-OSX-Only
 C command that looks for coreutils basic commands (cp, mv, dd, tar,
 gzip/gunzip, cat, etc.) currently running on your system and
 displays the percentage of copied data. It can also show estimated
 time and throughput, and provide a "top-like" mode (monitoring).
 .
 It simply scans `/proc` for interesting commands, and then looks at
 directories `fd` and `fdinfo` to find opened files and seek positions,
 and reports status for the largest file.
 .
 It's very light, and compatible with virtually any command.
 This program was formerly known as 'cv' on github.
Homepage: https://github.com/Xfennec/progress

Package: psmisc
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 909
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 23.6-1
Replaces: manpages-de (<< 4.9.1-1)
Depends: libc6 (>= 2.34), libtinfo6 (>= 6)
Breaks: manpages-de (<< 4.9.1-1)
Description: utilities that use the proc file system
 This package contains miscellaneous utilities that use the proc FS:
 .
  - fuser: identifies processes that are using files or sockets.
  - killall: kills processes by name (e.g. "killall -HUP named").
  - peekfd: shows the data traveling over a file descriptor.
  - pstree: shows currently running processes as a tree.
  - prtstat: print the contents of /proc/<pid>/stat
Homepage: http://psmisc.sf.net/

Package: pv
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 135
Maintainer: Antoine Beaupré <anarcat@debian.org>
Architecture: amd64
Version: 1.6.20-1
Depends: libc6 (>= 2.33)
Suggests: doc-base
Description: Shell pipeline element to meter data passing through
 pv (Pipe Viewer) can be inserted into any normal pipeline between two
 processes to give a visual indication of how quickly data is passing through,
 how long it has taken, how near to completion it is, and an estimate of how
 long it will be until completion.
 .
 To use it, insert it in a pipeline between two processes, with the
 appropriate options. Its standard input will be passed through to its
 standard output and progress will be shown on standard error.
Homepage: https://www.ivarch.com/programs/pv.shtml

Package: python-apt-common
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 527
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: python-apt
Version: 2.6.0
Replaces: python-apt (<< 0.7.98+nmu1)
Breaks: python-apt (<< 0.7.98+nmu1)
Enhances: python-apt, python3-apt
Description: Python interface to libapt-pkg (locales)
 The apt_pkg Python interface will provide full access to the internal
 libapt-pkg structures allowing Python programs to easily perform a
 variety of functions.
 .
 This package contains locales.

Package: python3
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 81
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: python3-defaults (3.11.2-1)
Version: 3.11.2-1+b1
Replaces: python3-minimal (<< 3.1.2-2)
Provides: python3-profiler, python3-supported-max (= 3.11), python3-supported-min (= 3.11)
Depends: python3.11 (>= 3.11.2-1~), libpython3-stdlib (= 3.11.2-1+b1)
Pre-Depends: python3-minimal (= 3.11.2-1+b1)
Suggests: python3-doc (>= 3.11.2-1+b1), python3-tk (>= 3.11.2-1~), python3-venv (>= 3.11.2-1+b1)
Description: interactive high-level object-oriented language (default python3 version)
 Python, the high-level, interactive object oriented language,
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
 .
 This package is a dependency package, which depends on Debian's default
 Python 3 version (currently v3.11).
Homepage: https://www.python.org/

Package: python3-acme
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 141
Maintainer: Debian Let's Encrypt <team+letsencrypt@tracker.debian.org>
Architecture: all
Source: python-acme
Version: 2.1.0-1
Provides: python3-acme-abi-2 (= 2.1)
Depends: ca-certificates, python3-openssl (>= 17.5.0), python3-cryptography (>= 2.5.0), python3-josepy (>= 1.13.0~), python3-pkg-resources, python3-requests, python3-rfc3339, python3-tz (>= 2019.3~), python3:any
Suggests: python-acme-doc
Description: ACME protocol library for Python 3
 This is a library used by the Let's Encrypt client for the ACME
 (Automated Certificate Management Environment).  The ACME protocol is
 designed as part of the Let's Encrypt project, to make it possible to
 setup an HTTPS server and have it automatically obtain a
 browser-trusted certificate, without any human intervention.  This
 library implements the protocol used for proving the control of a
 domain.  This library is Python 3.
Homepage: https://letsencrypt.org/

Package: python3-apt
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 685
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: python-apt
Version: 2.6.0
Replaces: python-apt (<< 0.7.98+nmu1)
Depends: python3 (<< 3.12), python3 (>= 3.11~), python3:any, libapt-pkg6.0 (>= 1.9.11~), libc6 (>= 2.33), libgcc-s1 (>= 3.0), libstdc++6 (>= 11), python-apt-common, distro-info-data
Recommends: lsb-release, iso-codes
Suggests: python-apt-doc, apt
Breaks: apt-xapian-index (<< 0.51~), kthresher (<= 1.4.0-1), python-apt (<< 0.7.98+nmu1)
Description: Python 3 interface to libapt-pkg
 The apt_pkg Python 3 interface will provide full access to the internal
 libapt-pkg structures allowing Python 3 programs to easily perform a
 variety of functions, such as:
 .
  - Access to the APT configuration system
  - Access to the APT package information database
  - Parsing of Debian package control files, and other files with a
    similar structure
 .
 The included 'aptsources' Python interface provides an abstraction of
 the sources.list configuration on the repository and the distro level.

Package: python3-attr
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 251
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Source: python-attrs
Version: 22.2.0-1
Depends: python3:any
Suggests: python-attr-doc
Description: Attributes without boilerplate (Python 3)
 attrs is an MIT-licensed Python package with class decorators that ease the
 chores of implementing the most common attribute-related object protocols.
 .
 You just specify the attributes to work with and attrs gives you:
   - a nice human-readable __repr__,
   - a complete set of comparison methods,
   - an initializer,
   - and much more
 without writing dull boilerplate code again and again.
 .
 This package contains attrs packaged for Python 3.
Homepage: https://attrs.readthedocs.org/

Package: python3-augeas
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 42
Maintainer: Free Ekanayaka <freee@debian.org>
Architecture: all
Source: python-augeas
Version: 0.5.0-1.1
Depends: libaugeas0 (>= 0.7.2), python3:any (>= 3.3~)
Description: Python3 bindings for Augeas
 Augeas is a library and command line tool that focuses
 on the most basic problem in handling Linux configurations
 programmatically: editing actual configuration files in a
 controlled manner.
 .
 This module provides a Python3 interface to the Augeas API.
Homepage: http://augeas.net/

Package: python3-blinker
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 58
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Source: blinker
Version: 1.5-1
Depends: python3:any
Suggests: python-blinker-doc
Description: Fast, simple object-to-object and broadcast signaling (Python3)
 Blinker provides fast & simple object-to-object and broadcast signaling
 for Python objects. Interested signal receivers can subscribe to specific
 senders or receive signals sent by any sender.
 .
 The core of Blinker is quite small but provides powerful features:
  * a global registry of named signals
  * anonymous signals
  * custom name registries
  * permanently or temporarily connected receivers
  * automatically disconnected receivers via weak referencing
  * sending arbitrary data payloads
  * collecting return values from signal receivers
  * thread safety
 .
 This package contains the Python 3 version.
Homepage: https://github.com/pallets-eco/blinker

Package: python3-cap-ng
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 75
Maintainer: Håvard F. Aasen <havard.f.aasen@pfft.no>
Architecture: amd64
Source: libcap-ng (0.8.3-1)
Version: 0.8.3-1+b3
Depends: python3 (<< 3.12), python3 (>= 3.11~), python3:any, libc6 (>= 2.14), libcap-ng0 (>= 0.8.3)
Description: Python3 bindings for libcap-ng
 This library implements the user-space interfaces to the POSIX
 1003.1e capabilities available in Linux kernels.  These capabilities are
 a partitioning of the all powerful root privilege into a set of distinct
 privileges.
 .
 The libcap-ng library is intended to make programming with POSIX
 capabilities much easier than the traditional libcap library.
 .
 This package contains the Python3 bindings for libcap-ng.
Homepage: https://people.redhat.com/sgrubb/libcap-ng

Package: python3-certbot
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 902
Maintainer: Debian Let's Encrypt <team+letsencrypt@tracker.debian.org>
Architecture: all
Source: python-certbot
Version: 2.1.0-4
Replaces: python-letsencrypt
Provides: python3-certbot-abi-2 (= 2.1)
Depends: python3-acme-abi-2 (>= 2.1), python3-requests, python3-acme, python3-configargparse, python3-configobj, python3-cryptography (>= 2.5.0), python3-distro, python3-josepy (>= 1.13.0~), python3-parsedatetime (>= 2.4), python3-pkg-resources, python3-rfc3339, python3-tz (>= 2019.3), python3:any
Recommends: certbot
Suggests: python-certbot-doc
Breaks: python-letsencrypt (<= 0.6.0)
Description: main library for certbot
 The objective of Certbot, Let's Enc
 rypt, and the ACME (Automated
 Certificate Management Environment) protocol is to make it possible
 to set up an HTTPS server and have it automatically obtain a
 browser-trusted certificate, without any human intervention. This is
 accomplished by running a certificate management agent on the web
 server.
 .
 This agent is used to:
 .
   - Automatically prove to the Let's Encrypt CA that you control the website
   - Obtain a browser-trusted certificate and set it up on your web server
   - Keep track of when your certificate is going to expire, and renew it
   - Help you revoke the certificate if that ever becomes necessary.
 .
 This package contains the main libraries.
Homepage: https://certbot.eff.org/

Package: python3-certbot-apache
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 325
Maintainer: Debian Let's Encrypt <team+letsencrypt@tracker.debian.org>
Architecture: all
Source: python-certbot-apache
Version: 2.1.0-2
Replaces: python-letsencrypt-apache
Depends: apache2, certbot, python3-certbot-abi-2 (>= 2.1), python3-acme, python3-augeas, python3-certbot, python3-pkg-resources, python3:any
Suggests: python-certbot-apache-doc
Breaks: python-letsencrypt-apache
Description: Apache plugin for Certbot
 The objective of Certbot, Let's Encrypt, and the ACME (Automated
 Certificate Management Environment) protocol is to make it possible
 to set up an HTTPS server and have it automatically obtain a
 browser-trusted certificate, without any human intervention. This is
 accomplished by running a certificate management agent on the web
 server.
 .
 This agent is used to:
 .
   - Automatically prove to the Let's Encrypt CA that you control the website
   - Obtain a browser-trusted certificate and set it up on your web server
   - Keep track of when your certificate is going to expire, and renew it
   - Help you revoke the certificate if that ever becomes necessary.
 .
 This package contains the Apache plugin to the main application.
Homepage: https://letsencrypt.org/

Package: python3-certifi
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 324
Maintainer: Sebastien Delafond <seb@debian.org>
Architecture: all
Source: python-certifi
Version: 2022.9.24-1
Depends: ca-certificates, python3:any
Description: root certificates for validating SSL certs and verifying TLS hosts (python3)
 Certifi is a carefully curated collection of Root Certificates for
 validating the trustworthiness of SSL certificates while verifying
 the identity of TLS hosts. It has been extracted from the Requests
 project.
 .
 The version of certifi in this Debian package is patched to return
 the location of Debian-provided CA certificates, instead of those
 packaged by upstream.
 .
 This is the python3 package.
Homepage: https://github.com/certifi/python-certifi

Package: python3-cffi-backend
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 213
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: python-cffi (1.15.1-5)
Version: 1.15.1-5+b1
Provides: python3-cffi-backend-api-9729, python3-cffi-backend-api-max (= 10495), python3-cffi-backend-api-min (= 9729)
Depends: python3 (<< 3.12), python3 (>= 3.11~), libc6 (>= 2.34), libffi8 (>= 3.4)
Description: Foreign Function Interface for Python 3 calling C code - runtime
 Convenient and reliable way of calling C code from Python 3.
 .
 The aim of this project is to provide a convenient and reliable way of calling
 C code from Python. It keeps Python logic in Python, and minimises the C
 required. It is able to work at either the C API or ABI level, unlike most
 other approaches, that only support the ABI level.
 .
 This package contains the runtime support for pre-built cffi modules.
Homepage: https://cffi.readthedocs.org/

Package: python3-chardet
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1144
Maintainer: Piotr Ożarowski <piotr@debian.org>
Architecture: all
Multi-Arch: foreign
Source: chardet
Version: 5.1.0+dfsg-2
Replaces: python-chardet (<< 3.0.4-6)
Depends: python3:any, python3-pkg-resources
Breaks: python-chardet (<< 3.0.4-6)
Description: Universal Character Encoding Detector (Python3)
 Chardet is a continuation of Mark Pilgrim's excellent original chardet port
 from C, and Ian Cordasco's charade Python 3-compatible fork.
 Chardet takes a sequence of bytes in an unknown character encoding, and
 attempts to determine the encoding.
 .
 Supported encodings:
  * Big5, GB2312/GB18030, EUC-TW, HZ-GB-2312, and ISO-2022-CN (Traditional
    and Simplified Chinese)
  * EUC-JP, SHIFT_JIS, and ISO-2022-JP (Japanese)
  * EUC-KR and ISO-2022-KR (Korean)
  * KOI8-R, MacCyrillic, IBM855, IBM866, ISO-8859-5, and windows-1251 (Russian)
  * ISO-8859-2 and windows-1250 (Hungarian)
  * ISO-8859-5 and windows-1251 (Bulgarian)
  * ISO-8859-1 and windows-1252 (Western European languages)
  * ISO-8859-7 and windows-1253 (Greek)
  * ISO-8859-8 and windows-1255 (Visual and Logical Hebrew)
  * TIS-620 (Thai)
  * UTF-32 BE, LE, 3412-ordered, or 2143-ordered (with a BOM)
  * UTF-16 BE or LE (with a BOM)
  * UTF-8 (with or without a BOM)
  * ASCII
 .
 This library is a port of the auto-detection code in Mozilla.
 .
 This package contains the Python 3 version of the library.
Homepage: https://github.com/chardet/chardet

Package: python3-charset-normalizer
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 209
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Source: python-charset-normalizer
Version: 3.0.1-2
Depends: python3:any
Description: charset, encoding and language detection (Python 3)
 charset-normalizer is a library for detection of charsets, encodings,
 and languages in Python programs. It can be compared to chardet, with
 a different approach, which intends to make it faster and more reliable.
 charset-normalizer can also detect natural languages.
 .
 All IANA character set names for which the Python core library provides
 codecs are supported.
 .
 This package installs the library for Python 3.
Homepage: https://github.com/ousret/charset_normalizer

Package: python3-configargparse
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 92
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Source: python-configargparse
Version: 1.5.3-1
Depends: python3:any
Description: replacement for argparse with config files and environment variables (Python 3)
 Applications with more than a handful of user-settable options are best
 configured through a combination of command line args, config files,
 hard-coded defaults, and in some cases, environment variables.
 .
 Python’s command line parsing modules such as argparse have very limited
 support for config files and environment variables, so this module extends
 argparse to add these features.
 .
 This is the Python 3 module.
Homepage: https://github.com/zorro3/ConfigArgParse

Package: python3-configobj
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 164
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Source: configobj
Version: 5.0.8-1
Depends: python3-six, python3:any
Suggests: python-configobj-doc
Description: simple but powerful config file reader and writer for Python 3
 ConfigObj is a simple but powerful config file reader and writer: an
 ini file round tripper. Its main feature is that it is very easy to
 use, with a straightforward programmer's interface and a simple
 syntax for config files. It has lots of other features, though:
 .
  * Nested sections (subsections), to any level
  * List values
  * Multiple line values
  * String interpolation (substitution)
  * Integrated with a powerful validation system
    + including automatic type checking/conversion
    + and allowing default values
    + repeated sections
  * All comments in the file are preserved
  * The order of keys/sections is preserved
  * Full Unicode support
  * Powerful unrepr mode for storing/retrieving Python data-types
 .
  This is the Python 3 version of the package.
Homepage: http://www.voidspace.org.uk/python/configobj.html

Package: python3-cryptography
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 2983
Maintainer: Tristan Seligmann <mithrandi@debian.org>
Architecture: amd64
Source: python-cryptography
Version: 38.0.4-3+deb12u1
Depends: python3 (>= 3~), python3-cffi-backend-api-min (<= 9729), python3-cffi-backend-api-max (>= 9729), python3:any, libc6 (>= 2.34), libgcc-s1 (>= 4.2), libssl3 (>= 3.0.0)
Suggests: python-cryptography-doc, python3-cryptography-vectors
Description: Python library exposing cryptographic recipes and primitives (Python 3)
 The cryptography library is designed to be a "one-stop-shop" for
 all your cryptographic needs in Python.
 .
 As an alternative to the libraries that came before it, cryptography
 tries to address some of the issues with those libraries:
  - Lack of PyPy and Python 3 support.
  - Lack of maintenance.
  - Use of poor implementations of algorithms (i.e. ones with known
    side-channel attacks).
  - Lack of high level, "Cryptography for humans", APIs.
  - Absence of algorithms such as AES-GCM.
  - Poor introspectability, and thus poor testability.
  - Extremely error prone APIs, and bad defaults.
 .
 This package contains the Python 3 version of cryptography.
Homepage: https://cryptography.io/

Package: python3-dbus
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 405
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: dbus-python (1.3.2-4)
Version: 1.3.2-4+b1
Depends: python3 (<< 3.12), python3 (>= 3.11~), python3:any, libc6 (>= 2.4), libdbus-1-3 (>= 1.9.14), libglib2.0-0 (>= 2.16.0)
Recommends: python3-gi
Suggests: python-dbus-doc
Description: simple interprocess messaging system (Python 3 interface)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package provides a Python 3 interface to D-Bus.
 .
 See the dbus description for more information about D-Bus in general.
Homepage: https://www.freedesktop.org/wiki/Software/DBusBindings#Python

Package: python3-debconf
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 18
Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>
Architecture: all
Source: debconf
Version: 1.5.82
Depends: debconf (= 1.5.82), python3:any
Description: interact with debconf from Python 3
 Debconf is a configuration management system for debian packages. Packages
 use Debconf to ask questions when they are installed.
 .
 This package provides a debconf module to allow Python 3 programs to
 interact with a debconf frontend.

Package: python3-debian
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 591
Maintainer: Debian python-debian Maintainers <pkg-python-debian-maint@lists.alioth.debian.org>
Architecture: all
Source: python-debian
Version: 0.1.49
Depends: python3-chardet, python3:any
Recommends: python3-apt, zstd
Suggests: gpgv
Description: Python 3 modules to work with Debian-related data formats
 This package provides Python 3 modules that abstract many formats of Debian
 related files. Currently handled are:
  * Debtags information (debian.debtags module)
  * debian/changelog (debian.changelog module)
  * Packages files, pdiffs (debian.debian_support module)
  * Control files of single or multiple RFC822-style paragraphs, e.g.
    debian/control, .changes, .dsc, Packages, Sources, Release, etc.
    (debian.deb822 module)
  * Raw .deb and .ar files, with (read-only) access to contained
    files and meta-information
Homepage: https://salsa.debian.org/python-debian-team/python-debian

Package: python3-debianbts
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 53
Maintainer: Bastian Venthur <venthur@debian.org>
Architecture: all
Source: python-debianbts
Version: 4.0.1
Depends: python3-pysimplesoap, python3:any
Description: Python interface to Debian's Bug Tracking System
 This package provides the debianbts module, which allows one to query Debian's
 BTS via it's SOAP-interface and returns the answer in Python's native data
 types.

Package: python3-distro
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 83
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Source: python-distro
Version: 1.8.0-1
Depends: lsb-release, python3:any
Description: Linux OS platform information API
 distro (for: Linux Distribution) provides information about the Linux
 distribution it runs on, such as a reliable machine-readable ID, or version
 information.
 .
 It is a renewed alternative implementation for Python's original
 platform.linux_distribution function, but it also provides much more
 functionality which isn't necessarily Python bound like a command-line
 interface.
 .
 This is the Python 3 version of the library.
Homepage: https://github.com/python-distro/distro

Package: python3-distro-info
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 34
Maintainer: Benjamin Drung <bdrung@debian.org>
Architecture: all
Source: distro-info
Version: 1.5+deb12u1
Depends: distro-info-data (>= 0.46), python3:any
Description: information about distributions' releases (Python 3 module)
 Information about all releases of Debian and Ubuntu.
 .
 This package contains a Python 3 module for parsing the data in
 distro-info-data. There is also a command line interface in the distro-info
 package.

Package: python3-distutils
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 638
Maintainer: Matthias Klose <doko@debian.org>
Architecture: all
Multi-Arch: foreign
Source: python3-stdlib-extensions
Version: 3.11.2-3
Replaces: libpython3.6-stdlib (<< 3.6.4~rc1-2), libpython3.7-stdlib (<< 3.7.0~a3-2)
Provides: python3.11-distutils
Depends: python3:any (>= 3.10.8-0~), python3:any (<< 3.12), python3-lib2to3 (= 3.11.2-3)
Breaks: libpython3.10-stdlib (<< 3.10.0~b1), libpython3.6-stdlib (<< 3.6.5~rc1-3), libpython3.7-stdlib (<< 3.7.0~b2-2), libpython3.8-stdlib (<< 3.8.0~b2-5)
Description: distutils package for Python 3.x
 Distutils package for Python 3.x.  This package contains the distutils module
 from the Python standard library.

Package: python3-firewall
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1271
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: all
Source: firewalld
Version: 1.3.3-1~deb12u2
Depends: gir1.2-glib-2.0, python3-gi, python3-dbus, python3:any
Description: Python3 bindings for firewalld
 firewalld is a dynamically managed firewall daemon with support for
 network/firewall zones to define the trust level of network connections
 or interfaces. It has support for IPv4, IPv6 firewall settings and for
 ethernet bridges and has a separation of runtime and persistent
 configuration options.
 It also provides a D-Bus interface for services or applications to add
 and apply firewall rules on-the-fly.
 .
 This package provides Python3 bindings for firewalld.
Homepage: https://www.firewalld.org/

Package: python3-gi
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 730
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: pygobject (3.42.2-3)
Version: 3.42.2-3+b1
Depends: gir1.2-glib-2.0 (>= 1.48.0), python3 (<< 3.12), python3 (>= 3.11~), python3:any, libc6 (>= 2.14), libffi8 (>= 3.4), libgirepository-1.0-1 (>= 1.62.0-4~), libgirepository-1.0-1-with-libffi8 (>= 1.62.0-4~), libglib2.0-0 (>= 2.67.3)
Description: Python 3 bindings for gobject-introspection libraries
 GObject is an abstraction layer that allows programming with an object
 paradigm that is compatible with many languages. It is a part of Glib,
 the core library used to build GTK+ and GNOME.
 .
 This package contains the Python 3 binding generator for libraries that
 support gobject-introspection, i. e. which ship a gir1.2-<name>-<version>
 package. With these packages, the libraries can be used from Python 3.
Homepage: https://wiki.gnome.org/Projects/PyGObject

Package: python3-httplib2
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 141
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Source: python-httplib2
Version: 0.20.4-3+deb12u1
Depends: ca-certificates, python3-pyparsing, python3:any
Breaks: python3-wsgi-intercept (<< 1.9.0)
Description: comprehensive HTTP client library written for Python3
 httplib2.py supports many features left out of other HTTP libraries.
  * HTTP and HTTPS
  * Keep-Alive
  * Authentication
  * Caching
  * All Methods
  * Redirects
  * Compression
  * Lost update support
  * Unit Tested
 .
 This package provides module for python3 series.
Homepage: https://github.com/httplib2/httplib2

Package: python3-icu
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 2685
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Source: pyicu (2.10.2-1)
Version: 2.10.2-1+b3
Depends: libc6 (>= 2.33), libgcc-s1 (>= 3.0), libicu72 (>= 72.1~rc-1~), libstdc++6 (>= 4.3), python3 (<< 3.12), python3 (>= 3.11~), python3:any
Description: Python 3 extension wrapping the ICU C++ API
 ICU is a C++ and C library that provides robust and full-featured
 Unicode and locale support. This package provides an extension for
 Python 3 which wraps the ICU C++ API.
Homepage: https://gitlab.pyicu.org/main/pyicu

Package: python3-idna
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 335
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Source: python-idna
Version: 3.3-1+deb12u1
Depends: python3:any
Description: Python IDNA2008 (RFC 5891) handling (Python 3)
 A library to support the Internationalised Domain Names in Applications (IDNA)
 protocol as specified in RFC 5891. This version of the protocol is often
 referred to as “IDNA2008” and can produce different results from the earlier
 standard from 2003.
 .
 The library is also intended to act as a suitable drop-in replacement for the
 “encodings.idna” module that comes with the Python standard library but
 currently only supports the older 2003 specification.
 .
 This package contains the module for Python 3.
Homepage: https://github.com/kjd/idna

Package: python3-jinja2
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 540
Maintainer: Piotr Ożarowski <piotr@debian.org>
Architecture: all
Source: jinja2
Version: 3.1.2-1+deb12u3
Replaces: python-jinja2 (<< 2.11.1-1)
Depends: python3-markupsafe (>= 2.0), python3:any
Recommends: python3-babel, python3-pkg-resources
Suggests: python-jinja2-doc
Breaks: python-jinja2 (<< 2.11.1-1)
Description: small but fast and easy to use stand-alone template engine
 Jinja2 is a template engine written in pure Python. It provides a Django
 inspired non-XML syntax but supports inline expressions and an optional
 sandboxed environment.
 .
 The key-features are:
  * Configurable syntax. If you are generating LaTeX or other formats with
    Jinja2 you can change the delimiters to something that integrates better
    into the LaTeX markup.
  * Fast. While performance is not the primarily target of Jinja2 it’s
    surprisingly fast. The overhead compared to regular Python code was reduced
    to the very minimum.
  * Easy to debug. Jinja2 integrates directly into the Python traceback system
    which allows you to debug Jinja2 templates with regular Python debugging
    helpers.
  * Secure. It’s possible to evaluate untrusted template code if the optional
    sandbox is enabled. This allows Jinja2 to be used as templating language
    for applications where users may modify the template design.
Homepage: http://jinja.pocoo.org/

Package: python3-josepy
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 105
Maintainer: Debian Let's Encrypt <team+letsencrypt@tracker.debian.org>
Architecture: all
Source: python-josepy
Version: 1.13.0-1
Depends: python3-cryptography (>= 1.5), python3-openssl (>= 0.13), python3-pkg-resources, python3:any
Description: JOSE implementation for Python 3.x
 This package is a Python implementation of the standards developed by
 IETF Javascript Object Signing and Encryption (Active WG), in
 particular the following RFCs:
 .
   - JSON Web Algorithms (JWA)
   - JSON Web Key (JWK)
   - JSON Web Signature (JWS)
 .
 This package was originally developed as part of the ACME protocol
 implementation.  This is the Python 3 library.
Homepage: https://certbot.eff.org/

Package: python3-json-pointer
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 45
Maintainer: Debian OpenStack <team+openstack@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Source: python-json-pointer
Version: 2.3-2
Depends: python3:any
Description: resolve JSON pointers - Python 3.x
 Python-json-pointer is a small library to resolve JSON pointers according to
 the IETF draft specification. JSON Pointer defines a string syntax for
 identifying a specific value within a JavaScript Object Notation (JSON)
 document.
 .
 This package provides the module for Python 3.x.
Homepage: https://github.com/stefankoegl/python-json-pointer

Package: python3-jsonpatch
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 60
Maintainer: Debian OpenStack <team+openstack@tracker.debian.org>
Architecture: all
Source: python-json-patch
Version: 1.32-2
Depends: python3-json-pointer, python3:any
Description: library to apply JSON patches - Python 3.x
 Python-json-patch is a Python module (a library) to apply JSON Patches
 according to the IETF draft specification.
 .
 From the IETF site:
 .
 JavaScript Object Notation (JSON) [RFC4627] is a common format for the
 exchange and storage of structured data.  HTTP PATCH [RFC5789] extends the
 Hypertext Transfer Protocol (HTTP) [RFC2616] with a method to perform partial
 modifications to resources.
 .
 JSON Patch is a format (identified by the media type "application/
 json-patch") for expressing a sequence of operations to apply to a target JSON
 document, suitable for use with the HTTP PATCH method.
 .
 This format is also potentially useful in other cases when it's necessary to
 make partial updates to a JSON document.
 .
 This package provides the Python 3.x module.
Homepage: https://github.com/stefankoegl/python-json-patch

Package: python3-jsonschema
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 491
Maintainer: Debian OpenStack <team+openstack@tracker.debian.org>
Architecture: all
Source: python-jsonschema
Version: 4.10.3-1
Depends: python3-attr, python3-importlib-metadata | python3 (>> 3.8), python3-importlib-resources | python3 (>> 3.9), python3-pyrsistent, python3-typing-extensions | python3 (>> 3.8), python3:any
Recommends: python3-idna, python3-json-pointer, python3-rfc3987, python3-uritemplate, python3-webcolors
Suggests: python-jsonschema-doc
Breaks: python3-json-pointer (<< 1.14)
Description: An(other) implementation of JSON Schema (Draft 3, 4, 6, 7)
 JSON Schema is a specification for a JSON-based format for defining
 the structure of JSON data. JSON Schema provides a contract for what
 JSON data is required for a given application and how it can be
 modified, much like what XML Schema provides for XML. JSON Schema is
 intended to provide validation, documentation, and interaction control
 of JSON data.
Homepage: https://github.com/Julian/jsonschema

Package: python3-jwt
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 103
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Source: pyjwt
Version: 2.6.0-1+deb12u1
Depends: python3:any
Recommends: python3-cryptography
Suggests: python3-crypto
Description: Python 3 implementation of JSON Web Token
 PyJWT implements the JSON Web Token draft 01, a way of representing
 signed content using JSON data structures.
 .
 Supported algorithms for cryptographic signing:
 .
   * HS256 - HMAC using SHA-256 hash algorithm (default)
   * HS384 - HMAC using SHA-384 hash algorithm
   * HS512 - HMAC using SHA-512 hash algorithm
   * RS256 - RSASSA-PKCS1-v1_5 signature algorithm using SHA-256 hash
     algorithm
   * RS384 - RSASSA-PKCS1-v1_5 signature algorithm using SHA-384 hash
     algorithm
   * RS512 - RSASSA-PKCS1-v1_5 signature algorithm using SHA-512 hash
     algorithm
 .
 Supported reserved claim names:
   - "exp" (Expiration Time) Claim
 .
 This package contains the Python 3 version of the library.
Homepage: https://github.com/jpadilla/pyjwt

Package: python3-lib2to3
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 365
Maintainer: Matthias Klose <doko@debian.org>
Architecture: all
Multi-Arch: foreign
Source: python3-stdlib-extensions
Version: 3.11.2-3
Replaces: libpython3.6-stdlib (<< 3.6.4~rc1-2), libpython3.7-stdlib (<< 3.7.0~a3-3), python3.6-2to3 (<< 3.6.4-2), python3.7-2to3 (<< 3.7.0~a3-3)
Provides: python3.11-lib2to3
Depends: python3:any (>= 3.10.8-0~), python3:any (<< 3.12)
Breaks: libpython3.10-stdlib (<< 3.10.0~b1), libpython3.6-stdlib (<< 3.6.4~rc1-2), libpython3.7-stdlib (<< 3.7.0~a3-3), python3.6-2to3 (<< 3.6.4-2), python3.7-2to3 (<< 3.7.0~a3-3)
Description: Interactive high-level object-oriented language (lib2to3)
 Python is a high-level, interactive, object-oriented language. It
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
 .
 This package contains the lib2to3 library, a Python2 to Python3 converter.

Package: python3-markdown-it
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 281
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Source: markdown-it-py
Version: 2.1.0-5
Depends: python3-mdurl, python3-typing-extensions | python3 (>> 3.8), python3:any
Description: Python port of markdown-it and some its associated plugins
 High speed Python markdown parser based in markdown-it. markdown-it-py
 follows the CommonMark spec for baseline parsing. Also, new syntax
 rules can be added and even replace existing ones. New syntax extensions
 can be added to extend the parser.
Homepage: https://github.com/executablebooks/markdown-it-py

Package: python3-markupsafe
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 53
Maintainer: Piotr Ożarowski <piotr@debian.org>
Architecture: amd64
Source: markupsafe (2.1.2-1)
Version: 2.1.2-1+b1
Depends: python3 (<< 3.12), python3 (>= 3.11~), python3:any, libc6 (>= 2.14)
Description: HTML/XHTML/XML string library
 MarkupSafe is a Python library implementing a unicode subclass that is
 aware of HTML escaping rules. It can be used to implement automatic
 string escaping.
Homepage: https://palletsprojects.com/p/markupsafe/

Package: python3-mdurl
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 42
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Source: mdurl
Version: 0.1.2-1
Depends: python3:any
Description: Python port of the JavaScript mdurl package
 mdurl is a set of URL utilities for the markdown-it-py package. It
 provides a pure-Python implementation of several functions from the
 original JavaScript package, such as .decode(), .parse(), .encode().
Homepage: https://github.com/executablebooks/mdurl

Package: python3-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 111
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: python3-defaults (3.11.2-1)
Version: 3.11.2-1+b1
Depends: dpkg (>= 1.13.20)
Pre-Depends: python3.11-minimal (>= 3.11.2-1~)
Description: minimal subset of the Python language (default python3 version)
 This package contains the interpreter and some essential modules.  It's used
 in the boot process for some basic tasks.
 See /usr/share/doc/python3.11-minimal/README.Debian for a list of the modules
 contained in this package.
Homepage: https://www.python.org/
Cnf-Visible-Pkgname: python3

Package: python3-netifaces
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 53
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: netifaces (0.11.0-2)
Version: 0.11.0-2+b1
Depends: python3 (<< 3.12), python3 (>= 3.11~), libc6 (>= 2.4)
Description: portable network interface information - Python 3.x
 netifaces provides a (hopefully portable-ish) way for Python programmers to
 get access to a list of the network interfaces on the local machine, and to
 obtain the addresses of those network interfaces.
 .
 This package contains the module for Python 3.x.
Homepage: https://alastairs-place.net/projects/netifaces/

Package: python3-nftables
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 60
Maintainer: Debian Netfilter Packaging Team <pkg-netfilter-team@lists.alioth.debian.org>
Architecture: amd64
Source: nftables
Version: 1.0.6-2+deb12u2
Depends: libnftables1 (= 1.0.6-2+deb12u2), python3-jsonschema, python3:any
Description: nftables/libnftables python3 module
 The libnftables library provides high level semantics to interact with the
 nftables framework by the Netfilter project.
 .
 nftables replaces the old popular iptables, ip6tables, arptables and ebtables.
 .
 Netfilter software and nftables in particular are used in applications such
 as Internet connection sharing, firewalls, IP accounting, transparent
 proxying, advanced routing and traffic control.
 .
 A Linux kernel >= 3.13 is required. However, >= 4.14 is recommended.
 .
 This package contains the libnftables python3 bindings.
Homepage: https://www.netfilter.org/

Package: python3-oauthlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 562
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Source: python-oauthlib
Version: 3.2.2-1
Depends: python3:any, python3-blinker, python3-cryptography, python3-jwt
Description: generic, spec-compliant implementation of OAuth for Python3
 OAuthLib is a generic utility which implements the logic of OAuth without
 assuming a specific HTTP request object. It can be used to graft OAuth support
 onto HTTP libraries.
 .
 OAuth 1 is fully supported per the RFC for both clients and providers.
 .
 OAuth 2 client and provider support for:
 .
   - Authorization Code Grant
   - Implicit Grant
   - Client Credentials Grant
   - Resource Owner Password Credentials Grant
   - Refresh Tokens
   - Bearer Tokens
   - Draft MAC tokens
   - Token Revocation
   - OpenID Connect Authentication
 .
 This package contains the Python 3 version of the library.
Homepage: https://github.com/idan/oauthlib

Package: python3-openssl
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 244
Maintainer: Sandro Tosi <morph@debian.org>
Architecture: all
Source: pyopenssl
Version: 23.0.0-1
Depends: python3-cryptography (>= 38.0.0), python3-cryptography (<< 40), python3:any
Suggests: python-openssl-doc, python3-openssl-dbg
Description: Python 3 wrapper around the OpenSSL library
 High-level wrapper around a subset of the OpenSSL library, includes
 .
   * SSL.Connection objects, wrapping the methods of Python's portable
     sockets
   * Callbacks written in Python
   * Extensive error-handling mechanism, mirroring OpenSSL's error
     codes
 .
 A lot of the object methods do nothing more than calling a
 corresponding function in the OpenSSL library.
 .
 This package contains the Python 3 version of pyopenssl.
Homepage: https://pyopenssl.org/

Package: python3-parsedatetime
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 184
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Source: parsedatetime
Version: 2.6-3
Depends: python3:any
Recommends: python3-icu
Description: Python 3 module to parse human-readable date/time expressions
 parsedatetime is able to parse, for example, the following:
 .
   * August 25th, 2008
   * 25 Aug 2008
   * Aug 25 5pm
   * 5pm August 25
   * next saturday
   * tomorrow
   * next thursday at 4pm
   * at 4pm
   * eod
   * tomorrow eod
   * eod tuesday
   * eoy
   * eom
   * in 5 minutes
   * 5 minutes from now
   * 5 hours before now
   * 2 hours before noon
   * 2 days from tomorrow
 .
 This package provides the modules for Python 3.
Homepage: https://github.com/bear/parsedatetime

Package: python3-pkg-resources
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1052
Maintainer: Matthias Klose <doko@debian.org>
Architecture: all
Multi-Arch: foreign
Source: setuptools
Version: 66.1.1-1+deb12u2
Depends: python3:any
Suggests: python3-setuptools
Description: Package Discovery and Resource Access using pkg_resources
 The pkg_resources module provides an API for Python libraries to
 access their resource files, and for extensible applications and
 frameworks to automatically discover plugins.  It also provides
 runtime support for using C extensions that are inside zipfile-format
 eggs, support for merging packages that have separately-distributed
 modules or subpackages, and APIs for managing Python's current
 "working set" of active packages.
Homepage: https://pypi.python.org/pypi/setuptools

Package: python3-pycurl
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 201
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: amd64
Source: pycurl
Version: 7.45.2-3
Depends: python3 (<< 3.12), python3 (>= 3.11~), python3:any, libc6 (>= 2.15), libcurl3-gnutls (>= 7.88.1)
Suggests: libcurl4-gnutls-dev, python-pycurl-doc
Description: Python bindings to libcurl (Python 3)
 This module provides the Python bindings to libcurl. Please refer to
 the libcurl documentation available in libcurl4-gnutls-dev Debian package.
 .
 NOTE: the SSL support is provided by GnuTLS.
 .
 This package contains PyCURL for Python 3.
Homepage: http://pycurl.sourceforge.net

Package: python3-pygments
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 4225
Maintainer: Piotr Ożarowski <piotr@debian.org>
Architecture: all
Multi-Arch: foreign
Source: pygments
Version: 2.14.0+dfsg-1
Replaces: python-pygments (<< 2.3.1+dfsg-4~)
Depends: python3-pkg-resources, python3:any
Suggests: python-pygments-doc, ttf-bitstream-vera
Breaks: python-pygments (<< 2.3.1+dfsg-4~)
Description: syntax highlighting package written in Python 3
 Pygments aims to be a generic syntax highlighter for general use in all kinds
 of software such as forum systems, wikis or other applications that need to
 prettify source code.
 .
 Highlights are:
   * a wide range of common languages and markup formats is supported
   * special attention is paid to details, increasing quality by a fair amount
   * support for new languages and formats are added easily
   * a number of output formats, presently HTML, LaTeX and ANSI sequences
   * it is usable as a command-line tool and as a library
Homepage: https://pygments.org/

Package: python3-pyparsing
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 453
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Source: pyparsing
Version: 3.0.9-1
Depends: python3:any
Suggests: python-pyparsing-doc
Breaks: python3-translate (<< 3.6.0~), translate-toolkit (<< 3.6.0~)
Description: alternative to creating and executing simple grammars - Python 3.x
 The parsing module is an alternative approach to creating and
 executing simple grammars, vs. the traditional lex/yacc approach, or
 the use of regular expressions.  The parsing module provides a
 library of classes that client code uses to construct the grammar
 directly in Python code.
 .
 Here's an example:
 .
  from pyparsing import Word, alphas
  greet = Word(alphas) + "," + Word(alphas) + "!"
  hello = "Hello, World!"
  print hello, "->", greet.parseString(hello)
 .
 This package contains the Python 3.x version of python-pyparsing.
Homepage: https://github.com/pyparsing/pyparsing/

Package: python3-pyrsistent
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 250
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: amd64
Multi-Arch: same
Source: pyrsistent (0.18.1-1)
Version: 0.18.1-1+b3
Depends: python3 (<< 3.12), python3 (>= 3.11~), python3:any, libc6 (>= 2.14)
Description: persistent/functional/immutable data structures for Python
 Pyrsistent is a number of persistent collections (sometimes referred
 to as functional data structures). Persistent in  the sense that they
 are immutable.
 .
 All methods on a data structure that would normally mutate it instead
 return a new copy of the structure containing the requested updates.
 The original structure is left untouched.
 .
 The collection types and key features currently implemented are:
 .
  * PVector, similar to a python list
  * PMap, similar to dict
  * PSet, similar to set
  * PRecord, a PMap on steroids with fixed fields, optional type and
    invariant checking and much more
  * PClass, a Python class fixed fields, optional type and invariant
    checking and much more
  * Checked collections, PVector, PMap and PSet with optional type
    and invariance checks and more
  * PBag, similar to collections.Counter
  * PList, a classic singly linked list
  * PDeque, similar to collections.deque
  * Immutable object type (immutable) built on the named tuple
  * freeze and thaw functions to convert between pythons standard
    collections and pyrsistent collections.
  * Flexible transformations of arbitrarily complex structures built
    from PMaps and PVectors.
Homepage: https://github.com/tobgu/pyrsistent/

Package: python3-pysimplesoap
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 191
Maintainer: Sandro Tosi <morph@debian.org>
Architecture: all
Source: pysimplesoap
Version: 1.16.2-5
Depends: python3-httplib2, python3-pycurl, python3:any
Description: simple and lightweight SOAP Library (Python 3)
 Python simple and lightweight SOAP library for client and server webservices
 interfaces, aimed to be as small and easy as possible, supporting most common
 functionality. Initially it was inspired by PHP Soap Extension (mimicking its
 functionality, simplicity and ease of use), with many advanced features added.
 .
 This package contains the Python 3 version of pysimplesoap .
Homepage: https://github.com/pysimplesoap/pysimplesoap/

Package: python3-reportbug
Status: install ok installed
Priority: standard
Section: python
Installed-Size: 353
Maintainer: Reportbug Maintainers <debian-reportbug@lists.debian.org>
Architecture: all
Source: reportbug
Version: 12.0.0
Depends: apt, file, python3-apt, python3-debian, python3-debianbts (>= 2.10), python3-requests, sensible-utils, python3:any
Suggests: reportbug
Description: Python modules for interacting with bug tracking systems
 reportbug is a tool designed to make the reporting of bugs in Debian
 and derived distributions relatively painless.
 .
 This package includes Python modules which may be reusable by other
 tools that want to interact with the Debian bug tracking system.
 .
 To actually report a bug, install the reportbug package.

Package: python3-requests
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 232
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Source: requests
Version: 2.28.1+dfsg-1
Depends: python3-certifi, python3-charset-normalizer, python3-idna, python3-urllib3 (>= 1.21.1), python3:any, ca-certificates, python3-chardet (>= 3.0.2)
Suggests: python3-cryptography, python3-idna (>= 2.5), python3-openssl, python3-socks, python-requests-doc
Breaks: awscli (<< 1.11.139)
Description: elegant and simple HTTP library for Python3, built for human beings
 Requests allow you to send HTTP/1.1 requests. You can add headers, form data,
 multipart files, and parameters with simple Python dictionaries, and access
 the response data in the same way. It's powered by httplib and urllib3, but
 it does all the hard work and crazy hacks for you.
 .
 Features
 .
   - International Domains and URLs
   - Keep-Alive & Connection Pooling
   - Sessions with Cookie Persistence
   - Browser-style SSL Verification
   - Basic/Digest Authentication
   - Elegant Key/Value Cookies
   - Automatic Decompression
   - Unicode Response Bodies
   - Multipart File Uploads
   - Connection Timeouts
 .
 This package contains the Python 3 version of the library.
Homepage: http://python-requests.org

Package: python3-rfc3339
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 33
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Source: pyrfc3339
Version: 1.1-4
Depends: python3-tz, python3:any
Description: parser and generator of RFC 3339-compliant timestamps (Python 3)
 pyRFC3339 parses and generates RFC 3339-compliant timestamps using Python
 datetime.datetime objects.
 .
 This is the Python 3 module.
Homepage: https://github.com/kurtraschke/pyRFC3339

Package: python3-rich
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1057
Maintainer: Sandro Tosi <morph@debian.org>
Architecture: all
Source: rich
Version: 13.3.1-1
Depends: python3-markdown-it, python3-pygments (>= 2.14.0), python3-typing-extensions (>= 3.7.4) | python3 (>> 3.9), python3:any
Description: render rich text, tables, progress bars, syntax highlighting, markdown and more
 Rich is a Python library for rich text and beautiful formatting in the
 terminal.
 .
 The Rich API makes it easy to add color and style to terminal output. Rich can
 also render pretty tables, progress bars, markdown, syntax highlighted source
 code, tracebacks, and more — out of the box.
 .
 Here's a list of the core functionalities of rich:
 .
  * to effortlessly add rich output to your application, you can import the rich
    print method, which has the same signature as the builtin Python function
  * Rich can be installed in the Python REPL, so that any data structures will
    be pretty printed and highlighted
  * for more control over rich terminal content, import and construct a Console
    object. The Console object has a print method which has an intentionally
    similar interface to the builtin print function
  * to insert an emoji in to console output place the name between two colons
  * Rich can render flexible tables with unicode box characters. There is a
    large variety of formatting options for borders, styles, cell alignment etc
  * Rich can render multiple flicker-free progress bars to track long-running
    tasks.
  * Rich can render content in neat columns with equal or optimal width.
  * Rich can render markdown and does a reasonable job of translating the
    formatting to the terminal
  * Rich can render beautiful tracebacks which are easier to read and show more
    code than standard Python tracebacks. You can set Rich as the default
    traceback handler so all uncaught exceptions will be rendered by Rich.
Homepage: https://github.com/willmcgugan/rich

Package: python3-serial
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 459
Maintainer: Matthias Klose <doko@debian.org>
Architecture: all
Source: pyserial
Version: 3.5-1.1
Depends: python3:any
Suggests: python3-wxgtk3.0 | python3-wxgtk
Description: pyserial - module encapsulating access for the serial port
 This module encapsulates the access for the serial port. It provides
 back-ends for standard Python running on Windows, Linux, BSD (possibly
 any POSIX compliant system). The module named "serial" automatically
 selects the appropriate back-end.
Homepage: https://github.com/pyserial/pyserial

Package: python3-six
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 63
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Source: six
Version: 1.16.0-4
Depends: python3:any
Description: Python 2 and 3 compatibility library
 Six is a Python 2 and 3 compatibility library. It provides utility
 functions for smoothing over the differences between the Python versions
 with the goal of writing Python code that is compatible on both Python
 versions.
Homepage: https://github.com/benjaminp/six

Package: python3-tz
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 103
Maintainer: Debian  Python Team <team+python@tracker.debian.org>
Architecture: all
Source: python-tz
Version: 2022.7.1-4
Depends: tzdata, python3:any
Description: Python3 version of the Olson timezone database
 python-tz brings the Olson tz database into Python. This library allows
 accurate and cross platform timezone calculations using Python 2.3 or higher.
 It also solves the issue of ambiguous times at the end of daylight savings,
 which you can read more about in the Python Library Reference
 (datetime.tzinfo).
 .
 This package contains the Python 3 version of the library.
Homepage: https://pythonhosted.org/pytz/

Package: python3-urllib3
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 456
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Source: python-urllib3
Version: 1.26.12-1+deb12u4
Depends: python3:any, python3-six
Recommends: ca-certificates
Suggests: python3-brotli, python3-cryptography, python3-idna, python3-openssl, python3-socks
Description: HTTP library with thread-safe connection pooling for Python3
 urllib3 supports features left out of urllib and urllib2 libraries.
 .
   - Re-use the same socket connection for multiple requests (HTTPConnectionPool
     and HTTPSConnectionPool) (with optional client-side certificate
     verification).
   - File posting (encode_multipart_formdata).
   - Built-in redirection and retries (optional).
   - Supports gzip and deflate decoding.
   - Thread-safe and sanity-safe.
   - Small and easy to understand codebase perfect for extending and
     building upon.
 .
 This package contains the Python 3 version of the library.
Homepage: https://urllib3.readthedocs.org

Package: python3-yaml
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 493
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: pyyaml (6.0-3)
Version: 6.0-3+b2
Depends: python3 (<< 3.12), python3 (>= 3.11~), python3:any, libc6 (>= 2.14), libyaml-0-2 (>= 0.2.2~)
Description: YAML parser and emitter for Python3
 Python3-yaml is a complete YAML 1.1 parser and emitter for Python3.  It can
 parse all examples from the specification. The parsing algorithm is simple
 enough to be a reference for YAML parser implementors. A simple extension API
 is also provided.  The package is built using libyaml for improved speed.
Homepage: https://github.com/yaml/pyyaml

Package: python3.11
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 650
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: allowed
Version: 3.11.2-6+deb12u8
Depends: python3.11-minimal (= 3.11.2-6+deb12u8), libpython3.11-stdlib (= 3.11.2-6+deb12u8), media-types | mime-support
Recommends: ca-certificates
Suggests: python3.11-venv, python3.11-doc, binutils
Breaks: python3-all (<< 3.6.5~rc1-1), python3-dev (<< 3.6.5~rc1-1), python3-venv (<< 3.6.5-2)
Description: Interactive high-level object-oriented language (version 3.11)
 Python is a high-level, interactive, object-oriented language. Its 3.11 version
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.

Package: python3.11-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 6766
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: allowed
Source: python3.11
Version: 3.11.2-6+deb12u8
Depends: libpython3.11-minimal (= 3.11.2-6+deb12u8), libexpat1 (>= 2.1~beta3), zlib1g (>= 1:1.2.0)
Pre-Depends: libc6 (>= 2.35)
Recommends: python3.11
Suggests: binfmt-support
Conflicts: binfmt-support (<< 1.1.2)
Description: Minimal subset of the Python language (version 3.11)
 This package contains the interpreter and some essential modules.  It can
 be used in the boot process for some basic tasks.
 See /usr/share/doc/python3.11-minimal/README.Debian for a list of the modules
 contained in this package.
Cnf-Visible-Pkgname: python3.11

Package: qemu-utils
Status: install ok installed
Priority: optional
Section: otherosfs
Installed-Size: 6911
Maintainer: Debian QEMU Team <pkg-qemu-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: qemu (1:7.2+dfsg-7+deb12u18)
Version: 1:7.2+dfsg-7+deb12u18+b3
Depends: libaio1 (>= 0.3.93), libc6 (>= 2.34), libfuse3-3 (>= 3.2.3), libglib2.0-0 (>= 2.67.3), libgmp10 (>= 2:6.2.1+dfsg1), libgnutls30 (>= 3.7.5), libhogweed6, libnettle8, libnuma1 (>= 2.0.11), libselinux1 (>= 3.1~), liburing2 (>= 2.3), libzstd1 (>= 1.5.2), zlib1g (>= 1:1.1.4)
Recommends: qemu-block-extra (= 1:7.2+dfsg-7+deb12u18+b3)
Breaks: qemu-system-common (<< 1:3.1+dfsg-3~)
Description: QEMU utilities
 QEMU is a fast processor emulator: currently the package supports
 ARM, CRIS, i386, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, SH4,
 SPARC and x86-64 emulation. By using dynamic translation it achieves
 reasonable speed while being easy to port on new host CPUs.
 .
 This package provides QEMU related utilities:
  * qemu-img: QEMU disk image utility
  * qemu-io:  QEMU disk exerciser
  * qemu-nbd: QEMU disk network block device server
Homepage: http://www.qemu.org/

Package: readline-common
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 89
Maintainer: Matthias Klose <doko@debian.org>
Architecture: all
Multi-Arch: foreign
Source: readline
Version: 8.2-1.3
Replaces: libreadline-common, libreadline4 (<< 4.3-16), libreadline5 (<< 5.0-11)
Depends: dpkg (>= 1.15.4) | install-info
Suggests: readline-doc
Conflicts: libreadline-common, libreadline5 (<< 5.0-11)
Description: GNU readline and history libraries, common files
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.

Package: redis-server
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 183
Maintainer: Chris Lamb <lamby@debian.org>
Architecture: amd64
Source: redis
Version: 5:7.0.15-1~deb12u9
Depends: lsb-base (>= 3.2-14), redis-tools (= 5:7.0.15-1~deb12u9)
Pre-Depends: init-system-helpers (>= 1.54~)
Conffiles:
 /etc/default/redis-server 36255dd86b15accc2acd4db7f5e21f05
 /etc/init.d/redis-server 2a51c7aa28acf5d7244352e80d0b26ff
 /etc/logrotate.d/redis-server 420ce1e139dd2044c4a3e44a2781a0a3
 /etc/redis/redis.conf 3f070d8d3ef55ec295f647bec0cd3326
Description: Persistent key-value database with network interface
 Redis is a key-value database in a similar vein to memcache but the dataset
 is non-volatile. Redis additionally provides native support for atomically
 manipulating and querying data structures such as lists and sets.
 .
 The dataset is stored entirely in memory and periodically flushed to disk.
Homepage: https://redis.io/

Package: redis-tools
Status: install ok installed
Priority: optional
Section: database
Installed-Size: 5837
Maintainer: Chris Lamb <lamby@debian.org>
Architecture: amd64
Source: redis
Version: 5:7.0.15-1~deb12u9
Replaces: redis-server (<< 2:2.6.16-1)
Depends: adduser, libatomic1 (>= 4.8), libc6 (>= 2.34), libjemalloc2 (>= 3.5.0), liblzf1 (>= 1.5), libssl3 (>= 3.0.0), libsystemd0
Suggests: ruby-redis
Breaks: redis-server (<< 2:2.6.16-1)
Description: Persistent key-value database with network interface (client)
 Redis is a key-value database in a similar vein to memcache but the dataset
 is non-volatile. Redis additionally provides native support for atomically
 manipulating and querying data structures such as lists and sets.
 .
 This package contains the command line client and other tools.
Homepage: https://redis.io/

Package: reportbug
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 190
Maintainer: Reportbug Maintainers <debian-reportbug@lists.debian.org>
Architecture: all
Version: 12.0.0
Depends: apt, python3-reportbug (= 12.0.0), sensible-utils, python3:any
Suggests: claws-mail (>= 3.8.0), debconf, debsums (>= 2.0.47), default-mta | postfix | exim4 | mail-transport-agent, dlocate, emacs-bin-common, file (>> 1.30), gnupg | pgp, python3-urwid, reportbug-gtk (= 12.0.0), xdg-utils
Conffiles:
 /etc/reportbug.conf 705322b9a62d3b68f7edde9beeb31522
Description: reports bugs in the Debian distribution
 reportbug is a tool designed to make the reporting of bugs in Debian
 and derived distributions relatively painless.  Its features include:
 .
  * Integration with many mail user agents.
  * Access to outstanding bug reports to make it easier to identify
    whether problems have already been reported.
  * Automatic checking for newer versions of packages.
  * Optional automatic verification of integrity of packages via debsums.
  * Support for following-up on outstanding reports.
  * Optional PGP/GnuPG integration.
 .
 Bug reporting in Debian relies on email; reportbug can use a local
 mail transport agent (like exim or sendmail), submit directly through
 an external mail server, or pass messages to an installed mail user
 agent (e.g., mutt) for submission.
 .
 This package also includes the "querybts" script for browsing the
 Debian bug tracking system.

Package: rpcsvc-proto
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 246
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.4.3-1
Replaces: libc-dev-bin (<< 2.31-14), libc6-dev (<< 2.31-14)
Depends: libc6 (>= 2.34)
Breaks: libc-dev-bin (<< 2.31-14), libc6-dev (<< 2.31-14)
Description: RPC protocol compiler and definitions
 rpcgen is a tool that generates C code to implement an RPC protocol. The input
 to rpcgen is a language similar to C known as RPC Language (Remote Procedure
 Call Language).
 .
 This package also includes several rpcsvc header files and RPC protocol
 definitions from SunRPC sources that were previously shipped by glibc.
Homepage: https://github.com/thkukuk/rpcsvc-proto

Package: rsync
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 793
Maintainer: Paul Slootman <paul@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 3.2.7-1+deb12u6
Depends: lsb-base, libacl1 (>= 2.2.23), libc6 (>= 2.34), liblz4-1 (>= 0.0~r130), libpopt0 (>= 1.14), libssl3 (>= 3.0.0), libxxhash0 (>= 0.8.0), libzstd1 (>= 1.5.2), zlib1g (>= 1:1.1.4)
Pre-Depends: init-system-helpers (>= 1.54~)
Suggests: openssh-client, openssh-server, python3, python3-braceexpand
Conffiles:
 /etc/default/rsync b8fd9efa75e2bda2583b0d7c0892a073
 /etc/init.d/rsync 59aa13cd1a70ff254a2991ad0c522ea5
Description: fast, versatile, remote (and local) file-copying tool
 rsync is a fast and versatile file-copying tool which can copy locally
 and to/from a remote host. It offers many options to control its behavior,
 and its remote-update protocol can minimize network traffic to make
 transferring updates between machines fast and efficient.
 .
 It is widely used for backups and mirroring and as an improved copy
 command for everyday use.
 .
 This package provides both the rsync command line tool and optional
 daemon functionality.
Homepage: https://rsync.samba.org/

Package: runit-helper
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 19
Maintainer: Lorenzo Puliti <plorenzo@disroot.org>
Architecture: all
Multi-Arch: foreign
Source: dh-runit
Version: 2.15.2
Description: dh-runit implementation detail
 runit-helper provides code, which actually perform actions on system
 users on behalf of dh-runit package. This separation allows packages
 take advantage of improvement or fixes in 'dh-runit' without
 rebuilding.
 .
 This package is implementation detail of 'dh-runit'. It should never
 be installed manually. No assumption about its content can be made.
Homepage: https://salsa.debian.org/debian/dh-runit

Package: screen
Status: install ok installed
Priority: standard
Section: misc
Installed-Size: 997
Maintainer: Axel Beckert <abe@debian.org>
Architecture: amd64
Version: 4.9.0-4
Depends: libc6 (>= 2.34), libcrypt1 (>= 1:4.1.0), libpam0g (>= 0.99.7.1), libtinfo6 (>= 6), libutempter0 (>= 1.1.5), debianutils (>= 5.3-1~)
Suggests: byobu | screenie | iselect (>= 1.4.0-1), ncurses-term
Conffiles:
 /etc/init.d/screen-cleanup 44ec7824f5ef10df73e92ad064331ea0
 /etc/screenrc 12c245238eb8b653625bba27dc81df6a
Description: terminal multiplexer with VT100/ANSI terminal emulation
 GNU Screen is a terminal multiplexer that runs several separate "screens" on
 a single physical character-based terminal. Each virtual terminal emulates a
 DEC VT100 plus several ANSI X3.64 and ISO 2022 functions. Screen sessions
 can be detached and resumed later on a different terminal.
 .
 Screen also supports a whole slew of other features, including configurable
 input and output translation, serial port support, configurable logging,
 and multi-user support.
Homepage: https://savannah.gnu.org/projects/screen

Package: sed
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 987
Maintainer: Clint Adams <clint@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 4.9-1+deb12u1
Pre-Depends: libacl1 (>= 2.2.23), libc6 (>= 2.34), libselinux1 (>= 3.1~)
Description: GNU stream editor for filtering/transforming text
 sed reads the specified files or the standard input if no
 files are specified, makes editing changes according to a
 list of commands, and writes the results to the standard
 output.
Homepage: https://www.gnu.org/software/sed/

Package: sensible-utils
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 56
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.0.17+nmu1
Replaces: debianutils (<= 2.32.3), manpages-pl (<= 20060617-3~)
Description: Utilities for sensible alternative selection
 This package provides a number of small utilities which are used
 by programs to sensibly select and spawn an appropriate browser,
 editor, or pager.
 .
 The specific utilities included are: sensible-browser sensible-editor
 sensible-pager

Package: sgml-base
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 70
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.31
Pre-Depends: dpkg (>= 1.16.4)
Suggests: sgml-base-doc
Description: SGML infrastructure and SGML catalog file support
 This package creates the SGML infrastructure directories and provides
 SGML catalog file support in compliance with the current Debian SGML
 Policy draft:
 .
   * infrastructure directories:
      - /etc/sgml
      - /usr/share/sgml/{declaration,dtd,entities,misc,stylesheet}
      - /usr/share/local/sgml/{declaration,dtd,entities,misc,stylesheet}
 .
   * update-catalog(8): tool for maintaining the root SGML catalog
     file and the package SGML catalog files in the '/etc/sgml' directory.

Package: shared-mime-info
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 5030
Maintainer: Debian freedesktop.org maintainers <pkg-freedesktop-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.2-1
Depends: libc6 (>= 2.33), libglib2.0-0 (>= 2.35.9), libxml2 (>= 2.7.4)
Description: FreeDesktop.org shared MIME database and spec
 This is the shared MIME-info database from the X Desktop Group. It is required
 by any program complying to the Shared MIME-Info Database spec, which is also
 included in this package.
 .
 At this time at least ROX, GNOME, KDE and Xfce use this database.
Homepage: https://freedesktop.org/wiki/Software/shared-mime-info

Package: shim-helpers-amd64-signed
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 991
Maintainer: Debian EFI team <debian-efi@lists.debian.org>
Architecture: amd64
Version: 1+16.1+2~deb12u1
Replaces: shim (<< 15+1533136590.3beb971-3~), shim-signed (<< 1.29)
Depends: shim-unsigned (>= 16.1-2~deb12u1)
Breaks: shim-signed (<< 1.29)
Conflicts: shim (<< 15+1533136590.3beb971-3~)
Description: boot loader to chain-load signed boot loaders (signed by Debian)
 This package provides a minimalist boot loader which allows verifying
 signatures of other UEFI binaries against either the Secure Boot DB/DBX or
 against a built-in signature database.  Its purpose is to allow a small,
 infrequently-changing binary to be signed by the UEFI CA, while allowing
 an OS distributor to revision their main bootloader independently of the CA.
 .
 This package contains the MOK manager and fall-back manager signed by the
 Debian UEFI CA to be used by shim-signed.
Built-Using: shim (= 16.1-2~deb12u1)

Package: shim-signed
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1054
Maintainer: Debian EFI Team <debian-efi@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: shim-signed (1.51~1+deb12u1)
Version: 1.51~1+deb12u1+16.1-2~deb12u1
Depends: debconf (>= 0.5) | debconf-2.0, mokutil, shim-signed-common (>= 1.51~1+deb12u1), grub-efi-amd64-bin, shim-helpers-amd64-signed (>= 1+15.8+1~deb12u1), grub2-common (>= 2.06-13+deb12u1)
Pre-Depends: debconf
Description: Secure Boot chain-loading bootloader (Microsoft-signed binary)
 This package provides a minimalist boot loader which allows verifying
 signatures of other UEFI binaries against either the Secure Boot DB/DBX or
 against a built-in signature database.  Its purpose is to allow a small,
 infrequently-changing binary to be signed by the UEFI CA, while allowing
 an OS distributor to revision their main bootloader independently of the CA.
 .
 This package contains the version of the bootloader binary signed by the
 Microsoft UEFI CA(s).
Built-Using: shim (= 16.1-2~deb12u1)

Package: shim-signed-common
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 51
Maintainer: Debian EFI Team <debian-efi@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: shim-signed (1.51~1+deb12u1)
Version: 1.51~1+deb12u1+16.1-2~deb12u1
Replaces: shim-signed (<< 1.32+15+1533136590.3beb971-5)
Depends: debconf (>= 0.5) | debconf-2.0, mokutil
Breaks: shim-signed (<< 1.32+15+1533136590.3beb971-5)
Description: Secure Boot chain-loading bootloader (common helper scripts)
 This package provides a minimalist boot loader which allows verifying
 signatures of other UEFI binaries against either the Secure Boot DB/DBX or
 against a built-in signature database.  Its purpose is to allow a small,
 infrequently-changing binary to be signed by the UEFI CA, while allowing
 an OS distributor to revision their main bootloader independently of the CA.
 .
 This package contains common helper scripts for all versions of the
 shim-signed package.

Package: shim-unsigned
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 2010
Maintainer: Debian EFI team <debian-efi@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: shim
Version: 16.1-2~deb12u1
Replaces: shim (<< 15+1533136590.3beb971-3~)
Conflicts: shim (<< 15+1533136590.3beb971-3~)
Description: boot loader to chain-load signed boot loaders under Secure Boot
 This package provides a minimalist boot loader which allows verifying
 signatures of other UEFI binaries against either the Secure Boot DB/DBX or
 against a built-in signature database.  Its purpose is to allow a small,
 infrequently-changing binary to be signed by the UEFI CA, while allowing
 an OS distributor to revision their main bootloader independently of the CA.

Package: socat
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 1515
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Version: 1.7.4.4-2
Depends: libc6 (>= 2.34), libssl3 (>= 3.0.0), libwrap0 (>= 7.6-4~)
Description: multipurpose relay for bidirectional data transfer
 Socat (for SOcket CAT) establishes two bidirectional byte streams
 and transfers data between them. Data channels may be files, pipes,
 devices (terminal or modem, etc.), or sockets (Unix, IPv4, IPv6, raw,
 UDP, TCP, SSL). It provides forking, logging and tracing, different
 modes for interprocess communication and many more options.
 .
 It can be used, for example, as a TCP relay (one-shot or daemon),
 as an external socksifier, as a shell interface to Unix sockets,
 as an IPv6 relay, as a netcat and rinetd replacement, to redirect
 TCP-oriented programs to a serial line, or to establish a relatively
 secure environment (su and chroot) for running client or server shell
 scripts inside network connections. Socat supports sctp as of 1.7.0.
Homepage: http://www.dest-unreach.org/socat/

Package: ssh-import-id
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 52
Maintainer: Andrew Starr-Bochicchio <asb@debian.org>
Architecture: all
Version: 5.10-1
Depends: ca-certificates, openssh-client, python3-requests (>= 1.1.0), python3-distro, wget, python3:any
Recommends: openssh-server
Conffiles:
 /etc/ssh/ssh_import_id 8bfa390040fbeeae70bec14f2dccaf11
Description: securely retrieve an SSH public key and install it locally
 This utility will securely contact a public keyserver (Launchpad.net by
 default, but Github.com is also supported), retrieve one or more user's
 public keys, and append these to the current user's ~/.ssh/authorized_keys
 file.
Homepage: http://launchpad.net/ssh-import-id

Package: sshfs
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 122
Maintainer: Bartosz Fenski <fenio@debian.org>
Architecture: amd64
Source: sshfs-fuse
Version: 3.7.3-1.2~deb12u1
Depends: libc6 (>= 2.34), libfuse3-3 (>= 3.2.3), libglib2.0-0 (>= 2.24.0), fuse3, openssh-client
Breaks: fuse (<< 3)
Description: filesystem client based on SSH File Transfer Protocol
 sshfs is a filesystem client based on the SSH File Transfer Protocol.
 Since most SSH servers already support this protocol it is very easy
 to set up: i.e. on the server side there's nothing to do.  On the
 client side mounting the filesystem is as easy as logging into the
 server with ssh.
 .
 sshfs is FUSE (Filesystem in USErspace).
Homepage: https://github.com/libfuse/sshfs

Package: ssl-cert
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 64
Maintainer: Debian Apache Maintainers <debian-apache@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.1.2
Depends: debconf (>= 0.5) | debconf-2.0, openssl (>= 0.9.8g-9), adduser
Description: simple debconf wrapper for OpenSSL
 This package enables unattended installs of packages that
 need to create SSL certificates.
 .
 It is a simple wrapper for OpenSSL's certificate request utility that
 feeds it with the correct user variables.

Package: sudo
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 6055
Maintainer: Sudo Maintainers <sudo@packages.debian.org>
Architecture: amd64
Version: 1.9.13p3-1+deb12u4
Replaces: sudo-ldap
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.34), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), zlib1g (>= 1:1.2.0.2), libpam-modules
Pre-Depends: init-system-helpers (>= 1.54~)
Conflicts: sudo-ldap
Conffiles:
 /etc/init.d/sudo 4fd40c92739a3bb2242df7cc6af126df
 /etc/pam.d/sudo 7fa5090826481c517f23faa1e21c77a8
 /etc/pam.d/sudo-i 95199b1f3d5a60bcf98058d9f8b70e70
 /etc/sudo.conf 8c714b777580faea54a2eb6d5f17ad1d
 /etc/sudo_logsrvd.conf ad0ba586da300ae3ba46312ad744a6e2
 /etc/sudoers da8bee36494c904ba767f0dd58920878
 /etc/sudoers.d/README 44c75ff004a18eeefdde4c998914d6d3
Description: Provide limited super user privileges to specific users
 Sudo is a program designed to allow a sysadmin to give limited root
 privileges to users and log root activity.  The basic philosophy is to give
 as few privileges as possible but still allow people to get their work done.
 .
 This version is built with minimal shared library dependencies, use the
 sudo-ldap package instead if you need LDAP support for sudoers.
Homepage: https://www.sudo.ws/

Package: syncthing
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 21594
Maintainer: Debian Go Packaging Team <team+pkg-go@tracker.debian.org>
Architecture: amd64
Source: syncthing (1.19.2~ds1-1)
Version: 1.19.2~ds1-1+b4
Depends: libc6 (>= 2.34), init-system-helpers (>= 1.52)
Conffiles:
 /etc/ufw/applications.d/syncthing 7bc483737df07a71aa8d483ae79dc3d7
Description: decentralized file synchronization
 Syncthing is an application that lets you synchronize your files across
 multiple devices. This means the creation, modification or deletion of files
 on one machine will automatically be replicated to your other devices.
 Syncthing does not upload your data to the cloud but exchanges your data
 across your machines as soon as they are online at the same time.
 .
 This package contains the main binary: syncthing.
Built-Using: go-md2man-v2 (= 2.0.2+ds1-1), golang-1.19 (= 1.19.8-2), golang-blackfriday-v2 (= 2.1.0-1), golang-github-alecthomas-kong (= 0.7.1-1), golang-github-audriusbutkevicius-pfilter (= 0.0.5-1), golang-github-audriusbutkevicius-recli (= 0.0.6-2), golang-github-azure-go-ntlmssp (= 0.0~git20220621.cb9428e-1), golang-github-beorn7-perks (= 1.0.1-1), golang-github-calmh-xdr (= 2.0.1-8), golang-github-ccding-go-stun (= 0.1.3-1), golang-github-cespare-xxhash (= 2.1.1-2), golang-github-chmduquesne-rollinghash (= 4.0.0-2), golang-github-go-ldap-ldap (= 3.4.4-2), golang-github-gobwas-glob (= 0.2.3+git20180208.19c076c-2), golang-github-golang-protobuf-1-3 (= 1.3.5-4), golang-github-golang-snappy (= 0.0.2-3), golang-github-google-shlex (= 0.0~git20191202.e7afc7f-1), golang-github-greatroar-blobloom (= 0.7.1-1), golang-github-hashicorp-golang-lru (= 0.5.4-2), golang-github-jackpal-gateway (= 1.0.7-1), golang-github-jackpal-go-nat-pmp (= 1.0.2-3), golang-github-julienschmidt-httprouter (= 1.3.0-2), golang-github-kballard-go-shellquote (= 0.0~git20180428.95032a8-2), golang-github-klauspost-cpuid (= 2.2.3-1), golang-github-lib-pq (= 1.10.7-2), golang-github-lucas-clemente-quic-go (= 0.29.0-1), golang-github-marten-seemann-qtls-go1-19 (= 0.1.0-3), golang-github-minio-sha256-simd (= 1.0.0-1), golang-github-miscreant-miscreant.go (= 0.0~git20200214.26d3763-3), golang-github-petermattis-goid (= 0.0~git20180202.b0b1615-3), golang-github-pierrec-lz4 (= 2.5.2-2), golang-github-pkg-errors (= 0.9.1-2), golang-github-prometheus-client-golang (= 1.14.0-3), golang-github-prometheus-client-model (= 0.3.0-3), golang-github-prometheus-common (= 0.39.0-2), golang-github-prometheus-procfs (= 0.8.0-3), golang-github-rcrowley-go-metrics (= 0.0~git20180125.8732c61-3), golang-github-sasha-s-go-deadlock (= 0.3.1-1), golang-github-shirou-gopsutil (= 3.22.10-1), golang-github-syncthing-notify (= 0.0~git20210616.c6b7342-2), golang-github-thejerf-suture (= 4.0.1-1), golang-github-urfave-cli (= 1.22.9-2), golang-github-vitrun-qart (= 0.1-5), golang-go.crypto (= 1:0.4.0-1), golang-gogoprotobuf (= 1.3.2-3), golang-golang-x-exp (= 0.0~git20221028.83b7d23-2), golang-golang-x-net (= 1:0.7.0+dfsg-1), golang-golang-x-sys (= 0.3.0-1), golang-golang-x-text (= 0.7.0-1), golang-golang-x-time (= 0.3.0-1), golang-goleveldb (= 0.0~git20200815.5c35d60-1), golang-google-protobuf (= 1.28.1-3), golang-gopkg-asn1-ber.v1 (= 1.5.4-1), golang-protobuf-extensions (= 1.0.1-3)
Homepage: https://www.syncthing.net/

Package: systemd
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 9668
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 252.39-1~deb12u2
Provides: systemd-sysusers (= 252.39-1~deb12u2), systemd-tmpfiles (= 252.39-1~deb12u2)
Depends: libacl1 (>= 2.2.23), libaudit1 (>= 1:2.2.1), libblkid1 (>= 2.24.2), libcryptsetup12 (>= 2:2.4), libfdisk1 (>= 2.33), libkmod2 (>= 15), libp11-kit0 (>= 0.23.18.1), libseccomp2 (>= 2.3.1), libsystemd-shared (= 252.39-1~deb12u2), libsystemd0 (= 252.39-1~deb12u2), mount
Pre-Depends: libblkid1 (>= 2.24), libc6 (>= 2.34), libcap2 (>= 1:2.10), libgcrypt20 (>= 1.10.0), liblz4-1 (>= 0.0~r122), liblzma5 (>= 5.1.1alpha+20120614), libmount1 (>= 2.30), libselinux1 (>= 3.1~), libssl3 (>= 3.0.0), libzstd1 (>= 1.5.2)
Recommends: default-dbus-system-bus | dbus-system-bus, systemd-timesyncd | time-daemon
Suggests: systemd-container, systemd-homed, systemd-userdbd, systemd-boot, systemd-resolved, libfido2-1, libqrencode4, libtss2-esys-3.0.2-0, libtss2-mu0, libtss2-rc0, polkitd | policykit-1
Breaks: less (<< 563), resolvconf (<< 1.83~), sicherboot (<< 0.1.6), udev (<< 247~)
Conflicts: consolekit, libpam-ck-connector, systemd-shim
Conffiles:
 /etc/systemd/journald.conf d2187d732ab2911016a4d4017c155dbb
 /etc/systemd/logind.conf 8276eeafa20aa65e6a5dca3bdcddafb4
 /etc/systemd/networkd.conf f461eed370e565cbe9890dd6b2c43996
 /etc/systemd/pstore.conf ea1d43113c41edaacb39180d60a50b08
 /etc/systemd/sleep.conf 72e9b6cd3c3c7c2abbe19564771336d0
 /etc/systemd/system.conf 36ace4ee4543e277db35948826aa6979
 /etc/systemd/user.conf a908ebf52cb61e955dcf6b6662666c8d
Description: system and service manager
 systemd is a system and service manager for Linux. It provides aggressive
 parallelization capabilities, uses socket and D-Bus activation for starting
 services, offers on-demand starting of daemons, keeps track of processes using
 Linux control groups, maintains mount and automount points and implements an
 elaborate transactional dependency-based service control logic.
 .
 Installing the systemd package will not switch your init system unless you
 boot with init=/lib/systemd/systemd or install systemd-sysv in addition.
Homepage: https://www.freedesktop.org/wiki/Software/systemd

Package: systemd-resolved
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 814
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: systemd
Version: 252.39-1~deb12u2
Replaces: resolvconf, systemd (<< 251.3-2~)
Provides: resolvconf
Depends: libc6 (>= 2.34), libssl3 (>= 3.0.0), libsystemd-shared (= 252.39-1~deb12u2), systemd (= 252.39-1~deb12u2), default-dbus-system-bus | dbus-system-bus
Recommends: libnss-myhostname, libnss-resolve
Suggests: polkitd | policykit-1
Breaks: systemd (<< 251.3-2~)
Conflicts: resolvconf
Conffiles:
 /etc/systemd/resolved.conf b7ae6ba126cd42e9477ea5e849741d0b
Description: systemd DNS resolver
 This package provides systemd's DNS resolver and the command line tool to
 manage it.
 .
 Installing this package automatically overwrites /etc/resolv.conf and switches
 it to be managed by systemd-resolved.
Homepage: https://www.freedesktop.org/wiki/Software/systemd

Package: systemd-sysv
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 74
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: systemd
Version: 252.39-1~deb12u2
Replaces: sysvinit-core
Pre-Depends: systemd
Recommends: libpam-systemd, libnss-systemd
Conflicts: file-rc, systemd-shim, sysvinit-core
Description: system and service manager - SysV compatibility symlinks
 This package provides manual pages and compatibility symlinks needed for
 systemd to replace sysvinit.
 .
 Installing systemd-sysv will overwrite /sbin/init with a symlink to systemd.
Homepage: https://www.freedesktop.org/wiki/Software/systemd

Package: systemd-timesyncd
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 148
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: systemd
Version: 252.39-1~deb12u2
Replaces: systemd (<< 245.4-2~), time-daemon
Provides: time-daemon
Depends: libc6 (>= 2.34), libsystemd-shared (= 252.39-1~deb12u2), systemd
Breaks: systemd (<< 245.4-2~)
Conflicts: time-daemon
Conffiles:
 /etc/dhcp/dhclient-exit-hooks.d/timesyncd c66e563f4050725592e2da20a4e1bfef
 /etc/systemd/timesyncd.conf 9bca5bc8be90d2921301a24084ffcd55
Description: minimalistic service to synchronize local time with NTP servers
 The package contains the systemd-timesyncd system service that may be used to
 synchronize the local system clock with a remote Network Time Protocol server.
Homepage: https://www.freedesktop.org/wiki/Software/systemd

Package: sysvinit-utils
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 100
Maintainer: Debian sysvinit maintainers <debian-init-diversity@chiark.greenend.org.uk>
Architecture: amd64
Multi-Arch: foreign
Source: sysvinit
Version: 3.06-4
Replaces: lsb-base
Provides: lsb-base (= 11.1.0)
Depends: libc6 (>= 2.34)
Conflicts: lsb-base (<< 11.3~)
Description: System-V-like utilities
 This package contains the important System-V-like utilities.
 .
 Specifically, this package includes:
 init-d-script, fstab-decode, killall5, pidof
 .
 It also contains the library scripts sourced by init-d-script and other
 initscripts that were formally in lsb-base.
Homepage: https://github.com/slicer69/sysvinit

Package: tar
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 3144
Maintainer: Janos Lenart <ocsi@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.34+dfsg-1.2+deb12u1
Replaces: cpio (<< 2.4.2-39)
Pre-Depends: libacl1 (>= 2.2.23), libc6 (>= 2.34), libselinux1 (>= 3.1~)
Suggests: bzip2, ncompress, xz-utils, tar-scripts, tar-doc
Breaks: dpkg-dev (<< 1.14.26)
Conflicts: cpio (<= 2.4.2-38)
Description: GNU version of the tar archiving utility
 Tar is a program for packaging a set of files as a single archive in tar
 format.  The function it performs is conceptually similar to cpio, and to
 things like PKZIP in the DOS world.  It is heavily used by the Debian package
 management system, and is useful for performing system backups and exchanging
 sets of files with others.
Homepage: https://www.gnu.org/software/tar/

Package: tcpdump
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 1332
Maintainer: Romain Francoise <rfrancoise@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 4.99.3-1
Replaces: apparmor-profiles-extra (<< 1.12~)
Depends: adduser, libc6 (>= 2.34), libpcap0.8 (>= 1.9.0), libssl3 (>= 3.0.0)
Suggests: apparmor (>= 2.3)
Breaks: apparmor-profiles-extra (<< 1.12~)
Conffiles:
 /etc/apparmor.d/usr.bin.tcpdump 56f4f8a13fefa4dd00648ed8a283bb9d
Description: command-line network traffic analyzer
 This program allows you to dump the traffic on a network. tcpdump
 is able to examine IPv4, ICMPv4, IPv6, ICMPv6, UDP, TCP, SNMP, AFS
 BGP, RIP, PIM, DVMRP, IGMP, SMB, OSPF, NFS and many other packet
 types.
 .
 It can be used to print out the headers of packets on a network
 interface, filter packets that match a certain expression. You can
 use this tool to track down network problems, to detect attacks
 or to monitor network activities.
Homepage: https://www.tcpdump.org/

Package: tmux
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1106
Maintainer: Romain Francoise <rfrancoise@debian.org>
Architecture: amd64
Version: 3.3a-3
Depends: libc6 (>= 2.34), libevent-core-2.1-7 (>= 2.1.8-stable), libtinfo6 (>= 6), libutempter0 (>= 1.1.5)
Description: terminal multiplexer
 tmux enables a number of terminals (or windows) to be accessed and
 controlled from a single terminal like screen. tmux runs as a
 server-client system. A server is created automatically when necessary
 and holds a number of sessions, each of which may have a number of
 windows linked to it. Any number of clients may connect to a session,
 or the server may be controlled by issuing commands with tmux.
 Communication takes place through a socket, by default placed in /tmp.
 Moreover tmux provides a consistent and well-documented command
 interface, with the same syntax whether used interactively, as a key
 binding, or from the shell. It offers a choice of vim or Emacs key
 layouts.
Homepage: https://tmux.github.io/

Package: traceroute
Status: install ok installed
Priority: important
Section: net
Installed-Size: 155
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Version: 1:2.1.2-1
Depends: libc6 (>= 2.34)
Description: Traces the route taken by packets over an IPv4/IPv6 network
 The traceroute utility displays the route used by IP packets on their way to a
 specified network (or Internet) host. Traceroute displays the IP number and
 host name (if possible) of the machines along the route taken by the packets.
 Traceroute is used as a network debugging tool. If you're having network
 connectivity problems, traceroute will show you where the trouble is coming
 from along the route.
 .
 Install traceroute if you need a tool for diagnosing network connectivity
 problems.
Homepage: https://traceroute.sourceforge.net/

Package: ttf-mscorefonts-installer
Status: install ok installed
Priority: optional
Section: contrib/fonts
Installed-Size: 85
Maintainer: Thijs Kinkhorst <thijs@debian.org>
Architecture: all
Multi-Arch: foreign
Source: msttcorefonts
Version: 3.8.1
Provides: msttcorefonts
Depends: wget, ca-certificates, cabextract, xfonts-utils, debconf (>= 0.5) | debconf-2.0
Recommends: fonts-liberation
Description: Installer for Microsoft TrueType core fonts
 This package allows for easy installation of the Microsoft True Type
 Core Fonts for the Web including:
 .
   Andale Mono
   Arial Black
   Arial (Bold, Italic, Bold Italic)
   Comic Sans MS (Bold)
   Courier New (Bold, Italic, Bold Italic)
   Georgia (Bold, Italic, Bold Italic)
   Impact
   Times New Roman (Bold, Italic, Bold Italic)
   Trebuchet (Bold, Italic, Bold Italic)
   Verdana (Bold, Italic, Bold Italic)
   Webdings
 .
 You will need an Internet connection to download these fonts if you
 don't already have them.
 .
 NOTE: the package fonts-liberation contains free variants of the Times,
 Arial and Courier fonts. It's better to use those instead unless you
 specifically need one of the other fonts from this package.

Package: tzdata
Status: install ok installed
Priority: required
Section: localization
Installed-Size: 2573
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2026b-0+deb12u1
Provides: tzdata-bookworm
Depends: debconf (>= 0.5) | debconf-2.0
Description: time zone and daylight-saving time data
 This package contains data required for the implementation of
 standard local time for many representative locations around the
 globe. It is updated periodically to reflect changes made by
 political bodies to time zone boundaries, UTC offsets, and
 daylight-saving rules.
Homepage: https://www.iana.org/time-zones

Package: ucf
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 214
Maintainer: Manoj Srivastava <srivasta@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 3.0043+nmu1+deb12u1
Depends: debconf (>= 0.5) | debconf-2.0, sensible-utils
Conffiles:
 /etc/ucf.conf 5565b8b26108c49ba575ba452cd69b3e
Description: Update Configuration File(s): preserve user changes to config files
 Debian policy mandates that user changes to configuration files must be
 preserved during package upgrades. The easy way to achieve this behavior
 is to make the configuration file a 'conffile', in which case dpkg
 handles the file specially during upgrades, prompting the user as
 needed.
 .
 This is appropriate only if it is possible to distribute a default
 version that will work for most installations, although some system
 administrators may choose to modify it. This implies that the
 default version will be part of the package distribution, and must
 not be modified by the maintainer scripts during installation (or at
 any other time).
 .
 This script attempts to provide conffile-like handling for files that
 may not be labelled conffiles, and are not shipped in a Debian package,
 but handled by the postinst instead. This script allows one to
 maintain files in /etc, preserving user changes and in general
 offering the same facilities while upgrading that dpkg normally
 provides for 'conffiles'.
 .
 Additionally, this script provides facilities for transitioning a
 file that had not been provided with conffile-like protection to come
 under this schema, and attempts to minimize questions asked at
 installation time. Indeed, the transitioning facility is better than the
 one offered by dpkg while transitioning a file from a non-conffile to
 conffile status.

Package: udev
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 10925
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: systemd
Version: 252.39-1~deb12u2
Depends: libacl1 (>= 2.2.23), libblkid1 (>= 2.37.2), libc6 (>= 2.34), libcap2 (>= 1:2.10), libkmod2 (>= 15), libselinux1 (>= 3.1~), adduser, libudev1 (= 252.39-1~deb12u2)
Conffiles:
 /etc/init.d/udev e9424814d107af7d8f58a22b1011810a
 /etc/udev/udev.conf bf60be80a4cc51271a1618edf5a6d66f
Description: /dev/ and hotplug management daemon
 udev is a daemon which dynamically creates and removes device nodes from
 /dev/, handles hotplug events and loads drivers at boot time.
Homepage: https://www.freedesktop.org/wiki/Software/systemd

Package: unattended-upgrades
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 301
Maintainer: Michael Vogt <mvo@debian.org>
Architecture: all
Version: 2.9.1+nmu3
Depends: debconf (>= 0.5) | debconf-2.0, debconf, python3, python3-apt (>= 1.9.6~), python3-dbus, python3-distro-info, ucf, lsb-release, lsb-base, xz-utils
Recommends: systemd-sysv | cron | cron-daemon | anacron
Suggests: bsd-mailx, default-mta | mail-transport-agent, needrestart, powermgmt-base, python3-gi
Conffiles:
 /etc/init.d/unattended-upgrades 290829a5efc55b7c435de0bb769f217b
 /etc/kernel/postinst.d/unattended-upgrades 21f0ac567d9738d1a017fc16e0150a35
 /etc/logrotate.d/unattended-upgrades e45049ee847f069a99e3e6ec39155d4a
 /etc/pm/sleep.d/10_unattended-upgrades-hibernate 0f5d54aa2dd322c805c90e409fc2724a
 /etc/update-motd.d/92-unattended-upgrades afa7546d3fe561e1f5783f7b9cf72096
Description: automatic installation of security upgrades
 This package can download and install security upgrades automatically
 and unattended, taking care to only install packages from the
 configured APT source, and checking for dpkg prompts about
 configuration file changes.
 .
 This script is the backend for the APT::Periodic::Unattended-Upgrade
 option.

Package: unzip
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 380
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 6.0-28+deb12u1
Depends: libbz2-1.0, libc6 (>= 2.34)
Suggests: zip
Description: De-archiver for .zip files
 InfoZIP's unzip program. With the exception of multi-volume archives
 (ie, .ZIP files that are split across several disks using PKZIP's /& option),
 this can handle any file produced either by PKZIP, or the corresponding
 InfoZIP zip program.
 .
 This version supports encryption.
Homepage: https://infozip.sourceforge.net/UnZip.html

Package: usr-is-merged
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 13
Maintainer: Marco d'Itri <md@linux.it>
Architecture: all
Multi-Arch: foreign
Source: usrmerge
Version: 37~deb12u1
Breaks: cruft-ng (<< 0.4.4~), initramfs-tools (<< 0.121~)
Conflicts: acl (<< 2.2.52-3~), arptables (<< 0.0.4+snapshot20181021-1~), coreutils (<< 8.24-1~), cruft (<< 0.9.44~), cryptsetup (<< 2:1.7.0-1~), davfs2 (<< 1.5.2-1.2~), debianutils (<< 4.5~), dhcpcd (<< 1:5~), ebtables (<< 2.0.10.4+snapshot20181205-1~), elvis-tiny (<< 1.4-24~), kbd (<< 2.0.4-4~), ksh (<< 93u+20120801-3.1~), less (<< 481-2~), libbrlapi-dev (<< 5.3.1-1~), libc0.1 (<< 2.35-4), libc0.3 (<< 2.35-4), libc6 (<< 2.35-4), libc6.1 (<< 2.35-4), libdm0-dev, libjson-c-dev (<< 0.12.1-1.1~), libparted1.8-10 (<< 1.8.8.git.2008.03.24-11.2~), libpng12-0 (<< 1.2.54-6~), libusb-0.1-4 (<< 2:0.1.12-28~), lustre-utils (<< 1.8.5+dfsg-3.2~), mksh (<< 52b-1~), molly-guard (<< 0.7.1+exp1~), musl-dev (<< 1.1.9-1.1~), nano (<< 2.3.99pre3-1~), open-iscsi (<< 2.0.873+git0.3b4b4500-13~), open-vm-tools (<< 2:10.0.5-3227872-2~), policycoreutils (<< 2.4-4~), safe-rm (<< 0.12-6~), tcsh (<< 6.18.01-4~), vsearch (<< 1.9.5-2~), xfsdump (<< 3.1.6+nmu1~), xfslibs-dev (<< 4.9.0+nmu1~), yp-tools (<< 3.3-5~), zsh (<< 5.2-4~)
Description: Transitional package to assert a merged-/usr system
 This package can be successfully installed only on merged-/usr systems.
 .
 It can be safely removed once no other package depends on it anymore.
Homepage: https://wiki.debian.org/UsrMerge

Package: util-linux
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 4978
Maintainer: util-linux packagers <util-linux@packages.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.38.1-5+deb12u3
Replaces: hardlink
Provides: hardlink
Depends: util-linux-extra
Pre-Depends: libblkid1 (>= 2.37.2), libc6 (>= 2.34), libcap-ng0 (>= 0.7.9), libcrypt1 (>= 1:4.1.0), libmount1 (>= 2.38), libpam0g (>= 0.99.7.1), libselinux1 (>= 3.1~), libsmartcols1 (>= 2.38), libsystemd0, libtinfo6 (>= 6), libudev1 (>= 183), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Recommends: sensible-utils
Suggests: dosfstools, kbd, util-linux-locales
Conflicts: hardlink
Conffiles:
 /etc/pam.d/runuser b8b44b045259525e0fae9e38fdb2aeeb
 /etc/pam.d/runuser-l 2106ea05877e8913f34b2c77fa02be45
 /etc/pam.d/su 60fbbe65c90d741bc0d380543cefe8af
 /etc/pam.d/su-l 756fef5687fecc0d986e5951427b0c4f
Description: miscellaneous system utilities
 This package contains a number of important utilities, most of which
 are oriented towards maintenance of your system. Some of the more
 important utilities included in this package allow you to view kernel
 messages, create new filesystems, view block device information,
 interface with real time clock, etc.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/

Package: util-linux-extra
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 366
Maintainer: util-linux packagers <util-linux@packages.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.38.1-5+deb12u3
Replaces: util-linux (<< 2.38~)
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.34), libsmartcols1 (>= 2.38)
Breaks: util-linux (<< 2.38~)
Conffiles:
 /etc/default/hwclock 02f94aaf57aff4e2e6751ec7b877a997
 /etc/init.d/hwclock.sh c06bc68c12cbdd9c7f60ba25ee587efe
Description: interactive login tools
 Tools commonly found on systems where humans login interactively,
 or are needed with non-standard system configurations.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/

Package: uuid-runtime
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 174
Maintainer: util-linux packagers <util-linux@packages.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.38.1-5+deb12u3
Depends: adduser, libc6 (>= 2.34), libsmartcols1 (>= 2.27~rc1), libsystemd0, libuuid1 (>= 2.38.1-2~)
Pre-Depends: libuuid1, init-system-helpers (>= 1.54~)
Conffiles:
 /etc/init.d/uuidd 29b6e6ae2de1365c06806e18f18d8fab
Description: runtime components for the Universally Unique ID library
 The libuuid library generates and parses 128-bit Universally Unique
 IDs (UUIDs). A UUID is an identifier that is unique within the space
 of all such identifiers across both space and time. It can be used for
 multiple purposes, from tagging objects with an extremely short lifetime
 to reliably identifying very persistent objects across a network.
 .
 See RFC 4122 for more information.
 .
 This package contains the uuidgen program and the uuidd daemon.
 .
 The uuidd daemon is used to generate UUIDs, especially time-based
 UUIDs, in a secure and guaranteed-unique fashion, even in the face of
 large numbers of threads trying to grab UUIDs running on different CPUs.
 It is used by libuuid as well as the uuidgen program.
Homepage: https://www.kernel.org/pub/linux/utils/util-linux/

Package: va-driver-all
Status: install ok installed
Priority: optional
Section: video
Installed-Size: 22
Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libva
Version: 2.17.0-1
Depends: i965-va-driver | i965-va-driver-shaders, intel-media-va-driver | intel-media-va-driver-non-free, mesa-va-drivers
Description: Video Acceleration (VA) API -- driver metapackage
 This package depends on the full suite of drivers for the Video Acceleration
 API (VA API). It does not provide any drivers itself, and may be removed if
 you wish to only have certain drivers installed.
Homepage: https://01.org/linuxmedia/vaapi

Package: vdpau-driver-all
Status: install ok installed
Priority: optional
Section: video
Installed-Size: 14
Maintainer: Debian NVIDIA Maintainers <pkg-nvidia-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libvdpau
Version: 1.5-2
Depends: libvdpau-va-gl1, mesa-vdpau-drivers
Suggests: nvidia-vdpau-driver, nvidia-tesla-440-vdpau-driver, nvidia-tesla-418-vdpau-driver, nvidia-legacy-390xx-vdpau-driver, nvidia-legacy-340xx-vdpau-driver, vdpau-driver
Description: Video Decode and Presentation API for Unix (driver metapackage)
 VDPAU (Video Decode and Presentation API for Unix) is an open source
 library (libvdpau) and API designed by NVIDIA originally for its GeForce
 8 series and later GPU hardware, targeted at the X Window System on Unix
 operating-systems (including Linux, FreeBSD, and Solaris). This VDPAU API
 allows video programs to offload portions of the video decoding process
 and video post-processing to the GPU video-hardware.
 .
 This package depends on the full suite of drivers for the VDPAU API.
 It does not provide any drivers itself, and may be removed if you wish to
 only have certain drivers installed.
Homepage: https://www.freedesktop.org/wiki/Software/VDPAU/

Package: vim
Status: install ok installed
Priority: optional
Section: editors
Installed-Size: 3650
Maintainer: Debian Vim Maintainers <team+vim@tracker.debian.org>
Architecture: amd64
Version: 2:9.0.1378-2+deb12u2
Provides: editor
Depends: vim-common (= 2:9.0.1378-2+deb12u2), vim-runtime (= 2:9.0.1378-2+deb12u2), libacl1 (>= 2.2.23), libc6 (>= 2.34), libgpm2 (>= 1.20.7), libselinux1 (>= 3.1~), libsodium23 (>= 1.0.14), libtinfo6 (>= 6)
Suggests: ctags, vim-doc, vim-scripts
Description: Vi IMproved - enhanced vi editor
 Vim is an almost compatible version of the UNIX editor Vi.
 .
 Many new features have been added: multi level undo, syntax
 highlighting, command line history, on-line help, filename
 completion, block operations, folding, Unicode support, etc.
 .
 This package contains a version of vim compiled with a rather
 standard set of features.  This package does not provide a GUI
 version of Vim.  See the other vim-* packages if you need more
 (or less).
Homepage: https://www.vim.org/

Package: vim-common
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 245
Maintainer: Debian Vim Maintainers <team+vim@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Source: vim
Version: 2:9.0.1378-2+deb12u2
Recommends: xxd, vim | vim-gtk3 | vim-motif | vim-nox | vim-tiny
Conffiles:
 /etc/vim/vimrc a28f17fea43e405b96cdffd3d6522382
Description: Vi IMproved - Common files
 Vim is an almost compatible version of the UNIX editor Vi.
 .
 This package contains files shared by all non GUI-enabled vim variants
 available in Debian.  Examples of such shared files are: manpages and
 configuration files.
Homepage: https://www.vim.org/

Package: vim-runtime
Status: install ok installed
Priority: optional
Section: editors
Installed-Size: 36406
Maintainer: Debian Vim Maintainers <team+vim@tracker.debian.org>
Architecture: all
Multi-Arch: foreign
Source: vim
Version: 2:9.0.1378-2+deb12u2
Recommends: vim | vim-gtk3 | vim-motif | vim-nox | vim-tiny
Breaks: vim-tiny (<< 2:9.0.1378-2+deb12u2)
Enhances: vim-tiny
Description: Vi IMproved - Runtime files
 Vim is an almost compatible version of the UNIX editor Vi.
 .
 This package contains vimtutor and the architecture independent runtime
 files, used, if available, by all vim variants available in Debian.
 Example of such runtime files are: online documentation, rules for
 language-specific syntax highlighting and indentation, color schemes,
 and standard plugins.
Homepage: https://www.vim.org/

Package: vim-tiny
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 1689
Maintainer: Debian Vim Maintainers <team+vim@tracker.debian.org>
Architecture: amd64
Source: vim
Version: 2:9.0.1378-2+deb12u2
Provides: editor
Depends: vim-common (= 2:9.0.1378-2+deb12u2), libacl1 (>= 2.2.23), libc6 (>= 2.34), libselinux1 (>= 3.1~), libtinfo6 (>= 6)
Suggests: indent
Conffiles:
 /etc/vim/vimrc.tiny 750b961d2a0bb4851c7a924cb428a72f
Description: Vi IMproved - enhanced vi editor - compact version
 Vim is an almost compatible version of the UNIX editor Vi.
 .
 This package contains a minimal version of Vim compiled with no GUI and
 a small subset of features. This package's sole purpose is to provide
 the vi binary for base installations.
 .
 If a vim binary is wanted, try one of the following more featureful
 packages: vim, vim-nox, vim-motif, or vim-gtk3.
Homepage: https://www.vim.org/

Package: wget
Status: install ok installed
Priority: standard
Section: web
Installed-Size: 3521
Maintainer: Noël Köthe <noel@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.21.3-1+deb12u1
Depends: libc6 (>= 2.34), libgnutls30 (>= 3.7.5), libidn2-0 (>= 0.6), libnettle8, libpcre2-8-0 (>= 10.22), libpsl5 (>= 0.16.0), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Conflicts: wget-ssl
Conffiles:
 /etc/wgetrc c43064699caf6109f4b3da0405c06ebb
Description: retrieves files from the web
 Wget is a network utility to retrieve files from the web
 using HTTP(S) and FTP, the two most widely used internet
 protocols. It works non-interactively, so it will work in
 the background, after having logged off. The program supports
 recursive retrieval of web-authoring pages as well as FTP
 sites -- you can use Wget to make mirrors of archives and
 home pages or to travel the web like a WWW robot.
 .
 Wget works particularly well with slow or unstable connections
 by continuing to retrieve a document until the document is fully
 downloaded. Re-getting files from where it left off works on
 servers (both HTTP and FTP) that support it. Both HTTP and FTP
 retrievals can be time stamped, so Wget can see if the remote
 file has changed since the last retrieval and automatically
 retrieve the new version if it has.
 .
 Wget supports proxy servers; this can lighten the network load,
 speed up retrieval, and provide access behind firewalls.
Homepage: https://www.gnu.org/software/wget/

Package: whiptail
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 57
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: newt (0.52.23-1)
Version: 0.52.23-1+b1
Depends: libc6 (>= 2.34), libnewt0.52 (>= 0.52.23), libpopt0 (>= 1.14), libslang2 (>= 2.2.4)
Description: Displays user-friendly dialog boxes from shell scripts
 Whiptail is a "dialog" replacement using newt instead of ncurses. It
 provides a method of displaying several different types of dialog boxes
 from shell scripts. This allows a developer of a script to interact with
 the user in a much friendlier manner.
Homepage: https://pagure.io/newt

Package: whois
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 385
Maintainer: Marco d'Itri <md@linux.it>
Architecture: amd64
Version: 5.5.17
Depends: libc6 (>= 2.34), libcrypt1 (>= 1:4.1.0), libidn2-0 (>= 2.0.3)
Description: intelligent WHOIS client
 This package provides a commandline client for the WHOIS (RFC 3912)
 protocol, which queries online servers for information such as contact
 details for domains and IP address assignments.
 It can intelligently select the appropriate WHOIS server for most queries.
 .
 The package also contains mkpasswd, a features-rich front end to the
 password encryption function crypt(3).

Package: x11-common
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 308
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: xorg
Version: 1:7.7+23
Depends: lsb-base (>= 1.3-9ubuntu2)
Conffiles:
 /etc/X11/Xreset 05d188ccac2f3360af8fe0c216640233
 /etc/X11/Xreset.d/README b344c222b5daf81926fd3270df374b5f
 /etc/X11/Xresources/x11-common b640adb1cd646ec097f8df5b6deca9f0
 /etc/X11/Xsession 9383a93bc2172001d9b9f46de7dd2256
 /etc/X11/Xsession.d/20x11-common_process-args 6957432229b7305a40cb84a7a63edd4e
 /etc/X11/Xsession.d/30x11-common_xresources 61cebe25ee0c64e981b88958dfee6f9c
 /etc/X11/Xsession.d/35x11-common_xhost-local 3080616d080574d7b06c2b2a20af53dd
 /etc/X11/Xsession.d/40x11-common_xsessionrc db544c8543d1cb3762b9859288e77040
 /etc/X11/Xsession.d/50x11-common_determine-startup b4570043736ae7f22947067b6d28ab8d
 /etc/X11/Xsession.d/90x11-common_ssh-agent 71116d351e6eab4ecce9b84229a4ece0
 /etc/X11/Xsession.d/99x11-common_start 3874d5e8f3ec888f69adb126e223e168
 /etc/X11/Xsession.options 210cd520efa87a5197cac01e10b3a84a
 /etc/X11/rgb.txt 09ee098b83d94c7c046d6b55ebe84ae1
 /etc/init.d/x11-common b121acab13ded0fb7e9bc90ad55c9a43
Description: X Window System (X.Org) infrastructure
 x11-common contains the filesystem infrastructure required for further
 installation of the X Window System in any configuration; it does not
 provide a full installation of clients, servers, libraries, and utilities
 required to run the X Window System.
 .
 A number of terms are used to refer to the X Window System, including "X",
 "X Version 11", "X11", "X11R6", and "X11R7".  The version of X used in
 Debian is derived from the version released by the X.Org Foundation, and
 is thus often also referred to as "X.Org".  All of the preceding quoted
 terms are functionally interchangeable in an Debian system.
Homepage: https://www.x.org/

Package: x11proto-dev
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 1680
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: xorgproto
Version: 2022.1-1
Replaces: x11proto-core-dev (<< 2018.3), x11proto-dri2-dev (<< 2018.3), x11proto-fonts-dev (<< 2018.3), x11proto-gl-dev (<< 2018.3), x11proto-input-dev (<< 2018.3), x11proto-kb-dev (<< 2018.3), x11proto-present-dev (<< 2018.3), x11proto-randr-dev (<< 2018.3), x11proto-record-dev (<< 2018.3), x11proto-render-dev (<< 2:2018.3), x11proto-scrnsaver-dev (<< 2018.3), x11proto-video-dev (<< 2018.3), x11proto-xext-dev (<< 2018.3), x11proto-xf86dga-dev (<< 2018.3), x11proto-xf86dri-dev (<< 2018.3), x11proto-xf86vidmode-dev (<< 2018.3), x11proto-xinerama-dev (<< 2018.3)
Provides: x11proto-core-dev (= 2022.1-1), x11proto-dri2-dev (= 2022.1-1), x11proto-fonts-dev (= 2022.1-1), x11proto-gl-dev (= 2022.1-1), x11proto-input-dev (= 2022.1-1), x11proto-kb-dev (= 2022.1-1), x11proto-present-dev (= 2022.1-1), x11proto-randr-dev (= 2022.1-1), x11proto-record-dev (= 2022.1-1), x11proto-render-dev (= 2022.1-1), x11proto-scrnsaver-dev (= 2022.1-1), x11proto-video-dev (= 2022.1-1), x11proto-xext-dev (= 2022.1-1), x11proto-xf86dga-dev (= 2022.1-1), x11proto-xf86dri-dev (= 2022.1-1), x11proto-xf86vidmode-dev (= 2022.1-1), x11proto-xinerama-dev (= 2022.1-1)
Depends: xorg-sgml-doctools (>= 1:1.5)
Breaks: x11proto-core-dev (<< 2018.3), x11proto-dri2-dev (<< 2018.3), x11proto-fonts-dev (<< 2018.3), x11proto-gl-dev (<< 2018.3), x11proto-input-dev (<< 2018.3), x11proto-kb-dev (<< 2018.3), x11proto-present-dev (<< 2018.3), x11proto-randr-dev (<< 2018.3), x11proto-record-dev (<< 2018.3), x11proto-render-dev (<< 2:2018.3), x11proto-scrnsaver-dev (<< 2018.3), x11proto-video-dev (<< 2018.3), x11proto-xext-dev (<< 2018.3), x11proto-xf86dga-dev (<< 2018.3), x11proto-xf86dri-dev (<< 2018.3), x11proto-xf86vidmode-dev (<< 2018.3), x11proto-xinerama-dev (<< 2018.3)
Description: X11 extension protocols and auxiliary headers
 This package provides development headers describing the wire protocol
 for the X11 core and extension protocols, and also provides a number of
 utility headers, used to abstract OS-specific functions.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This package is built from the X.org xorgproto module.
Homepage: https://www.x.org/

Package: xfonts-encodings
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 667
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1:1.0.4-2.2
Replaces: xfonts-base (<< 1:1.0.0)
Depends: x11-common
Description: Encodings for X.Org fonts
 This package contains the encodings that map to specific characters.

Package: xfonts-utils
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 415
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1:7.7+6
Depends: libc6 (>= 2.14), libfontenc1, libfreetype6 (>= 2.2.1), zlib1g (>= 1:1.1.4), x11-common, xfonts-encodings
Description: X Window System font utility programs
 xfonts-utils provides a set of utility programs shipped with the X Window
 System that are needed for font management.
 .
 The programs in this package include:
  - bdftopcf, which converts BDF fonts to PCF fonts;
  - bdftruncate and ucs2any, tools to generate fonts with various encodings
    from ISO 10646-encoded fonts
  - mkfontdir, a program to generate fonts.dir files;
  - mkfontscale, a program to generate fonts.scale files;
  - fonttosfnt, a program to wrap bitmap fonts in a sfnt (TrueType) wrapper.

Package: xkb-data
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 6925
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: xkeyboard-config
Version: 2.35.1-1
Breaks: libx11-6 (<< 2:1.4.3), x11-xkb-utils (<< 7.7+5)
Description: X Keyboard Extension (XKB) configuration data
 This package contains configuration data used by the X Keyboard
 Extension (XKB), which allows selection of keyboard layouts when
 using a graphical interface.
 .
 Every X11 vendor provides its own XKB data files, so keyboard layout
 designers have to send their layouts to several places.  The
 xkeyboard-config project has been launched at FreeDesktop in order
 to provide a central repository that could be used by all vendors.
Homepage: https://www.freedesktop.org/Software/XKeyboardConfig

Package: xml-core
Status: install ok installed
Priority: optional
Section: text
Installed-Size: 118
Maintainer: Debian XML-SGML group <debian-sgml@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.18+nmu1
Depends: sed (>= 4.1.2-8), sgml-base (>= 1.28)
Suggests: debhelper (>= 9.20120909)
Conffiles:
 /etc/sgml/xml-core.cat 055ba0bd3154c0a58b9bf8a0c9ecf2fa
Description: XML infrastructure and XML catalog file support
 This package creates the XML infrastructure directories and provides
 XML catalog file support in compliance with the current Debian XML
 Policy draft:
 .
   * infrastructure directories:
      - /etc/xml
      - /usr/share/xml/{declaration,entities,misc,schema}
      - /usr/local/share/xml/{declaration,entities,misc,schema}
 .
   * XML catalog schema: OASIS XML Catalog Committee Specification 1.0
 .
   * update-xmlcatalog(8): tool for maintaining the root XML catalog
     file and the package XML catalog files in the '/etc/xml' directory
     as well as local XML catalog files.
 .
   * dh_installxmlcatalogs(1): debhelper tool for installing local XML
     catalog files and registering XML entities in package XML catalog
     files and the root XML catalog file (requires debhelper package)

Package: xorg-sgml-doctools
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 89
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1:1.11-1.1
Description: Common tools for building X.Org SGML documentation
 This package contains tools for building the X.Org SGML documentation.
 Currently it only includes various entity definitions for the current
 release.

Package: xtrans-dev
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 330
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: xtrans
Version: 1.4.0-1
Description: X transport library (development files)
 xtrans includes a number of routines to make X implementations
 transport-independent; at time of writing, it includes support for UNIX
 sockets, IPv4, IPv6, and DECnet.
 .
 xtrans is not actually a library in itself; it includes .c files which are
 then used in the compilation of X servers, libraries, et al.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 https://cgit.freedesktop.org/xorg/lib/libxtrans/

Package: xz-utils
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 1226
Maintainer: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Architecture: amd64
Multi-Arch: foreign
Version: 5.4.1-1+deb12u1
Replaces: lzip (<< 1.8~rc2), manpages-de (<< 4.17.0-2~bpo11+1), manpages-fr (<< 4.17.0-2~bpo11+1), xz-lzma
Provides: lzma
Depends: libc6 (>= 2.34), liblzma5 (>= 5.4.0)
Breaks: lzip (<< 1.8~rc2), manpages-de (<< 4.17.0-2~bpo11+1), manpages-fr (<< 4.17.0-2~bpo11+1)
Conflicts: lzma (<< 9.22-1), xz-lzma
Description: XZ-format compression utilities
 XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
 compression format, which provides memory-hungry but powerful
 compression (often better than bzip2) and fast, easy decompression.
 .
 This package provides the command line tools for working with XZ
 compression, including xz, unxz, xzcat, xzgrep, and so on. They can
 also handle the older LZMA format, and if invoked via appropriate
 symlinks will emulate the behavior of the commands in the lzma
 package.
 .
 The XZ format is similar to the older LZMA format but includes some
 improvements for general use:
 .
  * 'file' magic for detecting XZ files;
  * crc64 data integrity check;
  * limited random-access reading support;
  * improved support for multithreading (not used in xz-utils);
  * support for flushing the encoder.
Homepage: https://tukaani.org/xz/

Package: zfs-dkms
Status: install ok installed
Priority: optional
Section: contrib/kernel
Installed-Size: 17719
Maintainer: Debian ZFS on Linux maintainers <pkg-zfsonlinux-devel@alioth-lists.debian.net>
Architecture: all
Source: zfs-linux
Version: 2.1.11-1+deb12u1
Replaces: spl-dkms
Provides: zfs-modules
Depends: dkms (>> 2.1.1.2-5), file, libc6-dev | libc-dev, lsb-release, python3-distutils | libpython3-stdlib (<< 3.6.4), debconf (>= 0.5) | debconf-2.0, perl:any
Recommends: zfs-zed, zfsutils-linux (>= 2.1.11-1+deb12u1), linux-libc-dev (<< 6.3~), linux-libc-dev (>= 3.10~)
Suggests: debhelper
Breaks: spl-dkms (<< 0.8.0~rc1)
Description: OpenZFS filesystem kernel modules for Linux
 OpenZFS is a storage platform that encompasses the functionality of
 traditional filesystems and volume managers. It supports data checksums,
 compression, encryption, snapshots, and more.
 .
 This DKMS package includes the SPA, DMU, ZVOL, and ZPL components of
 OpenZFS.
Homepage: https://zfsonlinux.org/

Package: zfs-zed
Status: install ok installed
Priority: optional
Section: contrib/admin
Installed-Size: 268
Maintainer: Debian ZFS on Linux maintainers <pkg-zfsonlinux-devel@alioth-lists.debian.net>
Architecture: amd64
Source: zfs-linux
Version: 2.1.11-1+deb12u1
Depends: zfs-modules | zfs-dkms, zfsutils-linux (>= 2.1.11-1+deb12u1), libc6 (>= 2.34), libnvpair3linux (>= 0.8.2), libudev1 (>= 183), libuuid1 (>= 2.16), libuutil3linux (>= 0.8.2), libzfs4linux (>= 2.1.11)
Pre-Depends: init-system-helpers (>= 1.54~)
Conffiles:
 /etc/init.d/zfs-zed 3b8f4ad88d1192d8873c186996b79850
 /etc/zfs/zed.d/zed-functions.sh 930d304cbb408f9f5c9979b1fb27f770
 /etc/zfs/zed.d/zed.rc c6b9cd7d6a10196a01dbed80e75a5fa5
Description: OpenZFS Event Daemon
 OpenZFS is a storage platform that encompasses the functionality of
 traditional filesystems and volume managers. It supports data checksums,
 compression, encryption, snapshots, and more.
 .
 ZED (ZFS Event Daemon) monitors events generated by the ZFS kernel
 module. When a zevent (ZFS Event) is posted, ZED will run any ZEDLETs
 (ZFS Event Daemon Linkage for Executable Tasks) that have been enabled
 for the corresponding zevent class.
 .
 This package provides the OpenZFS Event Daemon (zed).
Homepage: https://zfsonlinux.org/

Package: zfsutils-linux
Status: install ok installed
Priority: optional
Section: contrib/admin
Installed-Size: 1611
Maintainer: Debian ZFS on Linux maintainers <pkg-zfsonlinux-devel@alioth-lists.debian.net>
Architecture: amd64
Source: zfs-linux
Version: 2.1.11-1+deb12u1
Replaces: spl (<< 0.7.9-2), spl-dkms
Provides: zfsutils
Depends: libnvpair3linux (= 2.1.11-1+deb12u1), libuutil3linux (= 2.1.11-1+deb12u1), libzfs4linux (= 2.1.11-1+deb12u1), libzpool5linux (= 2.1.11-1+deb12u1), python3, libblkid1 (>= 2.16), libc6 (>= 2.34), libuuid1 (>= 2.16)
Pre-Depends: init-system-helpers (>= 1.54~)
Recommends: zfs-modules | zfs-dkms, zfs-zed
Suggests: nfs-kernel-server, samba-common-bin (>= 3.0.23), zfs-initramfs | zfs-dracut
Breaks: openrc, spl (<< 0.7.9-2), spl-dkms (<< 0.8.0~rc1), zfs-dkms (>> 2.1.11-1+deb12u1...), zfs-dkms (<< 2.1.11-1+deb12u1)
Conflicts: zfs, zfs-fuse
Conffiles:
 /etc/cron.d/zfsutils-linux 988b0007fc4d08bb239f7857d7403c87
 /etc/default/zfs cccd2955fb22165a7fd2d3fa5278cba0
 /etc/init.d/zfs-import c3b1775cd5edfaa4816de04e28260652
 /etc/init.d/zfs-load-key 032c5cdc3808e28b4455fff83287d43a
 /etc/init.d/zfs-mount d832e4979bc7a201e08ce795c61286d0
 /etc/init.d/zfs-share 93daf0a8e42de23d5a27d55c3b097fa4
 /etc/sudoers.d/zfs ad829cd4055ab2a8d41f8b5f2b564a3f
 /etc/zfs/zfs-functions f91fce8b15538536e62a47ad6bb422e0
Description: command-line tools to manage OpenZFS filesystems
 OpenZFS is a storage platform that encompasses the functionality of
 traditional filesystems and volume managers. It supports data checksums,
 compression, encryption, snapshots, and more.
 .
 This package provides the zfs and zpool commands to create and administer
 OpenZFS filesystems.
Homepage: https://zfsonlinux.org/

Package: zlib1g
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 168
Maintainer: Mark Brown <broonie@debian.org>
Architecture: amd64
Multi-Arch: same
Source: zlib
Version: 1:1.2.13.dfsg-1
Provides: libz1
Depends: libc6 (>= 2.14)
Breaks: libxml2 (<< 2.7.6.dfsg-2), texlive-binaries (<< 2009-12)
Conflicts: zlib1 (<= 1:1.0.4-7)
Description: compression library - runtime
 zlib is a library implementing the deflate compression method found
 in gzip and PKZIP.  This package includes the shared library.
Homepage: http://zlib.net/

Package: zlib1g-dev
Status: install ok installed
Priority: optional
Section: libdevel
Installed-Size: 1310
Maintainer: Mark Brown <broonie@debian.org>
Architecture: amd64
Multi-Arch: same
Source: zlib
Version: 1:1.2.13.dfsg-1
Provides: libz-dev
Depends: zlib1g (= 1:1.2.13.dfsg-1), libc6-dev | libc-dev
Conflicts: zlib1-dev
Description: compression library - development
 zlib is a library implementing the deflate compression method found
 in gzip and PKZIP.  This package includes the development support
 files.
Homepage: http://zlib.net/

Package: zstd
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 2102
Maintainer: RPM packaging team <team+pkg-rpm@tracker.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: libzstd
Version: 1.5.4+dfsg2-5
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), liblz4-1 (>= 1.8.0), liblzma5 (>= 5.1.1alpha+20120614), libstdc++6 (>= 12), zlib1g (>= 1:1.1.4)
Description: fast lossless compression algorithm -- CLI tool
 Zstd, short for Zstandard, is a fast lossless compression algorithm, targeting
 real-time compression scenarios at zlib-level compression ratio.
 .
 This package contains the CLI program implementing zstd.
Homepage: https://github.com/facebook/zstd

./old-debian12/var/log/cloud-init-output.log

Cloud-init v. 22.4.2 running 'init-local' at Sun, 07 Dec 2025 15:40:24 +0000. Up 4.00 seconds.
Cloud-init v. 22.4.2 running 'init' at Sun, 07 Dec 2025 15:40:40 +0000. Up 19.23 seconds.
ci-info: ++++++++++++++++++++++++++++++++++++++Net device info+++++++++++++++++++++++++++++++++++++++
ci-info: +--------+------+-----------------------------+---------------+--------+-------------------+
ci-info: | Device |  Up  |           Address           |      Mask     | Scope  |     Hw-Address    |
ci-info: +--------+------+-----------------------------+---------------+--------+-------------------+
ci-info: |  eth0  | True |        109.199.123.73       | 255.255.240.0 | global | 00:50:56:5e:95:7b |
ci-info: |  eth0  | True |  2a02:c207:2293:6396::1/64  |       .       | global | 00:50:56:5e:95:7b |
ci-info: |  eth0  | True | fe80::250:56ff:fe5e:957b/64 |       .       |  link  | 00:50:56:5e:95:7b |
ci-info: |   lo   | True |          127.0.0.1          |   255.0.0.0   |  host  |         .         |
ci-info: |   lo   | True |           ::1/128           |       .       |  host  |         .         |
ci-info: +--------+------+-----------------------------+---------------+--------+-------------------+
ci-info: +++++++++++++++++++++++++++++++Route IPv4 info+++++++++++++++++++++++++++++++
ci-info: +-------+---------------+---------------+---------------+-----------+-------+
ci-info: | Route |  Destination  |    Gateway    |    Genmask    | Interface | Flags |
ci-info: +-------+---------------+---------------+---------------+-----------+-------+
ci-info: |   0   |    0.0.0.0    | 109.199.112.1 |    0.0.0.0    |    eth0   |   UG  |
ci-info: |   1   | 109.199.112.0 |    0.0.0.0    | 255.255.240.0 |    eth0   |   U   |
ci-info: +-------+---------------+---------------+---------------+-----------+-------+
ci-info: +++++++++++++++++++++++++Route IPv6 info++++++++++++++++++++++++++
ci-info: +-------+--------------------------+---------+-----------+-------+
ci-info: | Route |       Destination        | Gateway | Interface | Flags |
ci-info: +-------+--------------------------+---------+-----------+-------+
ci-info: |   0   | 2a02:c207:2293:6396::/64 |    ::   |    eth0   |   U   |
ci-info: |   1   |        fe80::/64         |    ::   |    eth0   |   U   |
ci-info: |   2   |           ::/0           | fe80::1 |    eth0   |   UG  |
ci-info: |   4   |          local           |    ::   |    eth0   |   U   |
ci-info: |   5   |          local           |    ::   |    eth0   |   U   |
ci-info: |   6   |        multicast         |    ::   |    eth0   |   U   |
ci-info: +-------+--------------------------+---------+-----------+-------+
PermitRootLogin yes
# the setting of "PermitRootLogin prohibit-password".
2025-12-07 15:40:40,559 - util.py[WARNING]: Failed to run bootcmd module bootcmd
2025-12-07 15:40:40,561 - util.py[WARNING]: Running module bootcmd (<module 'cloudinit.config.cc_bootcmd' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_bootcmd.py'>) failed
2025-12-07 15:40:40,658 - ug_util.py[WARNING]: DEPRECATED: 'user' of type string is deprecated and will be removed in a future release. Use 'users' list instead.
2025-12-07 15:40:41,544 - ug_util.py[WARNING]: DEPRECATED: 'user' of type string is deprecated and will be removed in a future release. Use 'users' list instead.
Generating public/private rsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_rsa_key
Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
The key fingerprint is:
SHA256:LpWXtv9S1HLugRH2mUuc31oaPfGMHx3Q5zXGWlJUM5w root@vmi2936396
The key's randomart image is:
+---[RSA 3072]----+
|              *=+|
|             = E=|
|            . XoB|
|         . . ooX+|
|        S +  .+BO|
|       o o . .+=X|
|      . . .  . B+|
|       .   .. o o|
|            .o.  |
+----[SHA256]-----+
Generating public/private dsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_dsa_key
Your public key has been saved in /etc/ssh/ssh_host_dsa_key.pub
The key fingerprint is:
SHA256:A8fTqvN51ZrOQRLWSqKjOQuGZ94YdqSyrJFip+Cmn5U root@vmi2936396
The key's randomart image is:
+---[DSA 1024]----+
|                 |
|       . . .     |
|      . = = .    |
|       + * o     |
|    . o S o ..   |
| o o + o . o. .  |
|B.O.E o    ..o   |
|*@oO o o ...o.   |
|B== o   o. .o    |
+----[SHA256]-----+
Generating public/private ecdsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key
Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub
The key fingerprint is:
SHA256:v6gPenodV1lnBBl6uzbnD7TDlZknGQWBYSuClrDZmDA root@vmi2936396
The key's randomart image is:
+---[ECDSA 256]---+
|  E .       oo=Bo|
|   o B o   ..oo.o|
|    = = . . oooo |
|     .   . .o. ++|
|        S  .  =+o|
|        ...  o =.|
|      .. o.   O .|
|     .o... . . * |
|    o+.oo .     +|
+----[SHA256]-----+
Generating public/private ed25519 key pair.
Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
The key fingerprint is:
SHA256:0UTQPWoqXIZvNo9xAdHHwCNcEi5SIOz0OgTML19NtzY root@vmi2936396
The key's randomart image is:
+--[ED25519 256]--+
|o.. ....=X=+     |
|.oo. . o+== =    |
| +... +.+oo+ .   |
| .o..o.ooE+      |
| .o... +So..     |
|  o.  o B .      |
|   .   + *       |
|        . .      |
|                 |
+----[SHA256]-----+
Cloud-init v. 22.4.2 running 'modules:config' at Sun, 07 Dec 2025 15:40:42 +0000. Up 20.84 seconds.
2025-12-07 15:40:42,076 - ug_util.py[WARNING]: DEPRECATED: 'user' of type string is deprecated and will be removed in a future release. Use 'users' list instead.
Cloud-init v. 22.4.2 running 'modules:final' at Sun, 07 Dec 2025 15:40:42 +0000. Up 21.65 seconds.
Get:1 file:/etc/apt/mirrors/debian.list Mirrorlist [30 B]
Get:2 file:/etc/apt/mirrors/debian-security.list Mirrorlist [39 B]
Get:3 https://deb.debian.org/debian bookworm InRelease [151 kB]
Get:4 https://deb.debian.org/debian bookworm-updates InRelease [55.4 kB]
Get:5 https://deb.debian.org/debian bookworm-backports InRelease [59.4 kB]
Get:6 https://deb.debian.org/debian-security bookworm-security InRelease [48.0 kB]
Get:7 https://deb.debian.org/debian bookworm/main Sources [9494 kB]
Get:8 https://deb.debian.org/debian bookworm/main amd64 Packages [8791 kB]
Get:9 https://deb.debian.org/debian bookworm/main Translation-en [6109 kB]
Get:10 https://deb.debian.org/debian bookworm-updates/main Sources [3288 B]
Get:11 https://deb.debian.org/debian bookworm-updates/main amd64 Packages [6924 B]
Get:12 https://deb.debian.org/debian bookworm-updates/main Translation-en [5448 B]
Get:13 https://deb.debian.org/debian bookworm-backports/main Sources [290 kB]
Get:14 https://deb.debian.org/debian bookworm-backports/main amd64 Packages [298 kB]
Get:15 https://deb.debian.org/debian bookworm-backports/main Translation-en [251 kB]
Get:16 https://deb.debian.org/debian-security bookworm-security/main Sources [195 kB]
Get:17 https://deb.debian.org/debian-security bookworm-security/main amd64 Packages [289 kB]
Get:18 https://deb.debian.org/debian-security bookworm-security/main Translation-en [175 kB]
Fetched 26.2 MB in 3s (8434 kB/s)
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
Calculating upgrade...
The following NEW packages will be installed:
  firmware-linux-free linux-image-6.1.0-41-cloud-amd64
The following packages will be upgraded:
  base-files bash bind9-host bind9-libs ca-certificates cloud-init curl
  debian-archive-keyring distro-info-data e2fsprogs gcc-12-base gpgv init
  init-system-helpers initramfs-tools initramfs-tools-core libbpf1 libc-bin
  libc-l10n libc6 libcap2 libcap2-bin libcom-err2 libcurl3-gnutls libcurl4
  libexpat1 libext2fs2 libgcc-s1 libglib2.0-0 libgnutls30 libgssapi-krb5-2
  libicu72 libk5crypto3 libkrb5-3 libkrb5support0 libnss-myhostname
  libpam-systemd libpython3.11-minimal libpython3.11-stdlib libsqlite3-0
  libss2 libssl3 libstdc++6 libsystemd-shared libsystemd0 libudev1 libxml2
  linux-image-cloud-amd64 locales login logsave openssh-client openssh-server
  openssh-sftp-server openssl passwd perl-base python3-jinja2
  python3-pkg-resources python3.11 python3.11-minimal qemu-utils sudo systemd
  systemd-resolved systemd-sysv systemd-timesyncd tzdata udev
69 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 81.0 MB of archives.
After this operation, 108 MB of additional disk space will be used.
Get:1 file:/etc/apt/mirrors/debian.list Mirrorlist [30 B]
Get:33 file:/etc/apt/mirrors/debian-security.list Mirrorlist [39 B]
Get:2 https://deb.debian.org/debian bookworm/main amd64 base-files amd64 12.4+deb12u12 [70.9 kB]
Get:3 https://deb.debian.org/debian bookworm/main amd64 bash amd64 5.2.15-2+b9 [1491 kB]
Get:4 https://deb.debian.org/debian bookworm/main amd64 login amd64 1:4.13+dfsg1-1+deb12u1 [616 kB]
Get:5 https://deb.debian.org/debian bookworm/main amd64 perl-base amd64 5.36.0-7+deb12u3 [1608 kB]
Get:6 https://deb.debian.org/debian bookworm/main amd64 init-system-helpers all 1.65.2+deb12u1 [39.0 kB]
Get:7 https://deb.debian.org/debian bookworm/main amd64 gcc-12-base amd64 12.2.0-14+deb12u1 [37.6 kB]
Get:8 https://deb.debian.org/debian bookworm/main amd64 libgcc-s1 amd64 12.2.0-14+deb12u1 [49.9 kB]
Get:9 https://deb.debian.org/debian bookworm/main amd64 libstdc++6 amd64 12.2.0-14+deb12u1 [613 kB]
Get:10 https://deb.debian.org/debian bookworm/main amd64 libc6 amd64 2.36-9+deb12u13 [2758 kB]
Get:11 https://deb.debian.org/debian bookworm/main amd64 libc-bin amd64 2.36-9+deb12u13 [609 kB]
Get:12 https://deb.debian.org/debian bookworm/main amd64 logsave amd64 1.47.0-2+b2 [19.9 kB]
Get:13 https://deb.debian.org/debian bookworm/main amd64 initramfs-tools all 0.142+deb12u3 [16.0 kB]
Get:14 https://deb.debian.org/debian bookworm/main amd64 initramfs-tools-core all 0.142+deb12u3 [48.3 kB]
Get:15 https://deb.debian.org/debian bookworm/main amd64 libext2fs2 amd64 1.47.0-2+b2 [205 kB]
Get:16 https://deb.debian.org/debian bookworm/main amd64 e2fsprogs amd64 1.47.0-2+b2 [572 kB]
Get:17 https://deb.debian.org/debian bookworm/main amd64 libcap2 amd64 1:2.66-4+deb12u2 [27.2 kB]
Get:18 https://deb.debian.org/debian bookworm/main amd64 systemd-sysv amd64 252.39-1~deb12u1 [42.6 kB]
Get:19 https://deb.debian.org/debian bookworm/main amd64 libpam-systemd amd64 252.39-1~deb12u1 [225 kB]
Get:20 https://deb.debian.org/debian bookworm/main amd64 systemd-timesyncd amd64 252.39-1~deb12u1 [63.8 kB]
Get:21 https://deb.debian.org/debian bookworm/main amd64 systemd amd64 252.39-1~deb12u1 [3042 kB]
Get:22 https://deb.debian.org/debian bookworm/main amd64 systemd-resolved amd64 252.39-1~deb12u1 [308 kB]
Get:23 https://deb.debian.org/debian bookworm/main amd64 libsystemd-shared amd64 252.39-1~deb12u1 [1695 kB]
Get:24 https://deb.debian.org/debian bookworm/main amd64 libsystemd0 amd64 252.39-1~deb12u1 [333 kB]
Get:25 https://deb.debian.org/debian bookworm/main amd64 udev amd64 252.39-1~deb12u1 [1720 kB]
Get:26 https://deb.debian.org/debian bookworm/main amd64 libudev1 amd64 252.39-1~deb12u1 [109 kB]
Get:27 https://deb.debian.org/debian bookworm/main amd64 init amd64 1.65.2+deb12u1 [5600 B]
Get:28 https://deb.debian.org/debian bookworm/main amd64 passwd amd64 1:4.13+dfsg1-1+deb12u1 [972 kB]
Get:29 https://deb.debian.org/debian bookworm/main amd64 libgssapi-krb5-2 amd64 1.20.1-2+deb12u4 [135 kB]
Get:30 https://deb.debian.org/debian bookworm/main amd64 libkrb5-3 amd64 1.20.1-2+deb12u4 [334 kB]
Get:31 https://deb.debian.org/debian bookworm/main amd64 libkrb5support0 amd64 1.20.1-2+deb12u4 [33.2 kB]
Get:32 https://deb.debian.org/debian bookworm/main amd64 libk5crypto3 amd64 1.20.1-2+deb12u4 [79.8 kB]
Get:34 https://deb.debian.org/debian bookworm/main amd64 libcom-err2 amd64 1.47.0-2+b2 [20.0 kB]
Get:35 https://deb.debian.org/debian bookworm/main amd64 openssh-sftp-server amd64 1:9.2p1-2+deb12u7 [65.9 kB]
Get:36 https://deb.debian.org/debian bookworm/main amd64 openssh-server amd64 1:9.2p1-2+deb12u7 [457 kB]
Get:37 https://deb.debian.org/debian bookworm/main amd64 openssh-client amd64 1:9.2p1-2+deb12u7 [992 kB]
Get:38 https://deb.debian.org/debian bookworm/main amd64 python3.11 amd64 3.11.2-6+deb12u6 [573 kB]
Get:39 https://deb.debian.org/debian bookworm/main amd64 libpython3.11-stdlib amd64 3.11.2-6+deb12u6 [1798 kB]
Get:40 https://deb.debian.org/debian bookworm/main amd64 python3.11-minimal amd64 3.11.2-6+deb12u6 [2064 kB]
Get:41 https://deb.debian.org/debian bookworm/main amd64 libpython3.11-minimal amd64 3.11.2-6+deb12u6 [817 kB]
Get:42 https://deb.debian.org/debian bookworm/main amd64 libsqlite3-0 amd64 3.40.1-2+deb12u2 [839 kB]
Get:43 https://deb.debian.org/debian bookworm/main amd64 libexpat1 amd64 2.5.0-1+deb12u2 [99.9 kB]
Get:44 https://deb.debian.org/debian-security bookworm-security/main amd64 libssl3 amd64 3.0.17-1~deb12u3 [2028 kB]
Get:45 https://deb.debian.org/debian bookworm/main amd64 sudo amd64 1.9.13p3-1+deb12u2 [1890 kB]
Get:46 https://deb.debian.org/debian bookworm/main amd64 debian-archive-keyring all 2023.3+deb12u2 [179 kB]
Get:47 https://deb.debian.org/debian bookworm/main amd64 gpgv amd64 2.2.40-1.1+deb12u1 [649 kB]
Get:48 https://deb.debian.org/debian bookworm/main amd64 libgnutls30 amd64 3.7.9-2+deb12u5 [1406 kB]
Get:49 https://deb.debian.org/debian bookworm/main amd64 tzdata all 2025b-0+deb12u2 [300 kB]
Get:50 https://deb.debian.org/debian bookworm/main amd64 libicu72 amd64 72.1-3+deb12u1 [9376 kB]
Get:51 https://deb.debian.org/debian bookworm/main amd64 libxml2 amd64 2.9.14+dfsg-1.3~deb12u4 [687 kB]
Get:52 https://deb.debian.org/debian-security bookworm-security/main amd64 bind9-host amd64 1:9.18.41-1~deb12u1 [54.7 kB]
Get:53 https://deb.debian.org/debian-security bookworm-security/main amd64 bind9-libs amd64 1:9.18.41-1~deb12u1 [1181 kB]
Get:54 https://deb.debian.org/debian-security bookworm-security/main amd64 openssl amd64 3.0.17-1~deb12u3 [1434 kB]
Get:55 https://deb.debian.org/debian bookworm/main amd64 ca-certificates all 20230311+deb12u1 [155 kB]
Get:56 https://deb.debian.org/debian bookworm/main amd64 libc-l10n all 2.36-9+deb12u13 [677 kB]
Get:57 https://deb.debian.org/debian bookworm/main amd64 locales all 2.36-9+deb12u13 [3901 kB]
Get:58 https://deb.debian.org/debian bookworm/main amd64 python3-jinja2 all 3.1.2-1+deb12u3 [120 kB]
Get:59 https://deb.debian.org/debian bookworm/main amd64 cloud-init all 22.4.2-1+deb12u3 [589 kB]
Get:60 https://deb.debian.org/debian bookworm/main amd64 curl amd64 7.88.1-10+deb12u14 [316 kB]
Get:61 https://deb.debian.org/debian bookworm/main amd64 libcurl4 amd64 7.88.1-10+deb12u14 [392 kB]
Get:62 https://deb.debian.org/debian bookworm/main amd64 distro-info-data all 0.58+deb12u5 [6452 B]
Get:63 https://deb.debian.org/debian bookworm/main amd64 firmware-linux-free all 20200122-1 [24.2 kB]
Get:64 https://deb.debian.org/debian bookworm/main amd64 libbpf1 amd64 1:1.1.2-0+deb12u1 [145 kB]
Get:65 https://deb.debian.org/debian bookworm/main amd64 libcap2-bin amd64 1:2.66-4+deb12u2 [34.9 kB]
Get:66 https://deb.debian.org/debian bookworm/main amd64 libcurl3-gnutls amd64 7.88.1-10+deb12u14 [386 kB]
Get:67 https://deb.debian.org/debian bookworm/main amd64 libglib2.0-0 amd64 2.74.6-2+deb12u7 [1401 kB]
Get:68 https://deb.debian.org/debian bookworm/main amd64 libnss-myhostname amd64 252.39-1~deb12u1 [84.8 kB]
Get:69 https://deb.debian.org/debian bookworm/main amd64 libss2 amd64 1.47.0-2+b2 [24.8 kB]
Get:70 https://deb.debian.org/debian-security bookworm-security/main amd64 linux-image-6.1.0-41-cloud-amd64 amd64 6.1.158-1 [26.3 MB]
Get:71 https://deb.debian.org/debian-security bookworm-security/main amd64 linux-image-cloud-amd64 amd64 6.1.158-1 [1504 B]
Get:72 https://deb.debian.org/debian bookworm/main amd64 python3-pkg-resources all 66.1.1-1+deb12u2 [297 kB]
Get:73 https://deb.debian.org/debian bookworm/main amd64 qemu-utils amd64 1:7.2+dfsg-7+deb12u16 [1291 kB]
apt-listchanges: Reading changelogs...
Preconfiguring packages ...
Fetched 81.0 MB in 3s (30.5 MB/s)
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20783 files and directories currently installed.)
Preparing to unpack .../base-files_12.4+deb12u12_amd64.deb ...
Unpacking base-files (12.4+deb12u12) over (12.4+deb12u10) ...
Setting up base-files (12.4+deb12u12) ...
Installing new version of config file /etc/debian_version ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20783 files and directories currently installed.)
Preparing to unpack .../bash_5.2.15-2+b9_amd64.deb ...
Unpacking bash (5.2.15-2+b9) over (5.2.15-2+b7) ...
Setting up bash (5.2.15-2+b9) ...
update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20783 files and directories currently installed.)
Preparing to unpack .../login_1%3a4.13+dfsg1-1+deb12u1_amd64.deb ...
Unpacking login (1:4.13+dfsg1-1+deb12u1) over (1:4.13+dfsg1-1+b1) ...
Setting up login (1:4.13+dfsg1-1+deb12u1) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20782 files and directories currently installed.)
Preparing to unpack .../perl-base_5.36.0-7+deb12u3_amd64.deb ...
Unpacking perl-base (5.36.0-7+deb12u3) over (5.36.0-7+deb12u2) ...
Setting up perl-base (5.36.0-7+deb12u3) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20782 files and directories currently installed.)
Preparing to unpack .../init-system-helpers_1.65.2+deb12u1_all.deb ...
Unpacking init-system-helpers (1.65.2+deb12u1) over (1.65.2) ...
Setting up init-system-helpers (1.65.2+deb12u1) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20783 files and directories currently installed.)
Preparing to unpack .../gcc-12-base_12.2.0-14+deb12u1_amd64.deb ...
Unpacking gcc-12-base:amd64 (12.2.0-14+deb12u1) over (12.2.0-14) ...
Setting up gcc-12-base:amd64 (12.2.0-14+deb12u1) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20783 files and directories currently installed.)
Preparing to unpack .../libgcc-s1_12.2.0-14+deb12u1_amd64.deb ...
Unpacking libgcc-s1:amd64 (12.2.0-14+deb12u1) over (12.2.0-14) ...
Setting up libgcc-s1:amd64 (12.2.0-14+deb12u1) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20783 files and directories currently installed.)
Preparing to unpack .../libstdc++6_12.2.0-14+deb12u1_amd64.deb ...
Unpacking libstdc++6:amd64 (12.2.0-14+deb12u1) over (12.2.0-14) ...
Setting up libstdc++6:amd64 (12.2.0-14+deb12u1) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20783 files and directories currently installed.)
Preparing to unpack .../libc6_2.36-9+deb12u13_amd64.deb ...
Unpacking libc6:amd64 (2.36-9+deb12u13) over (2.36-9+deb12u10) ...
Setting up libc6:amd64 (2.36-9+deb12u13) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20783 files and directories currently installed.)
Preparing to unpack .../libc-bin_2.36-9+deb12u13_amd64.deb ...
Unpacking libc-bin (2.36-9+deb12u13) over (2.36-9+deb12u10) ...
Setting up libc-bin (2.36-9+deb12u13) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20783 files and directories currently installed.)
Preparing to unpack .../logsave_1.47.0-2+b2_amd64.deb ...
Unpacking logsave (1.47.0-2+b2) over (1.47.0-2) ...
Preparing to unpack .../initramfs-tools_0.142+deb12u3_all.deb ...
Unpacking initramfs-tools (0.142+deb12u3) over (0.142+deb12u1) ...
Preparing to unpack .../initramfs-tools-core_0.142+deb12u3_all.deb ...
Unpacking initramfs-tools-core (0.142+deb12u3) over (0.142+deb12u1) ...
Preparing to unpack .../libext2fs2_1.47.0-2+b2_amd64.deb ...
Unpacking libext2fs2:amd64 (1.47.0-2+b2) over (1.47.0-2) ...
Setting up libext2fs2:amd64 (1.47.0-2+b2) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20785 files and directories currently installed.)
Preparing to unpack .../e2fsprogs_1.47.0-2+b2_amd64.deb ...
Unpacking e2fsprogs (1.47.0-2+b2) over (1.47.0-2) ...
Preparing to unpack .../libcap2_1%3a2.66-4+deb12u2_amd64.deb ...
Unpacking libcap2:amd64 (1:2.66-4+deb12u2) over (1:2.66-4) ...
Setting up libcap2:amd64 (1:2.66-4+deb12u2) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20786 files and directories currently installed.)
Preparing to unpack .../systemd-sysv_252.39-1~deb12u1_amd64.deb ...
Unpacking systemd-sysv (252.39-1~deb12u1) over (252.36-1~deb12u1) ...
Preparing to unpack .../libpam-systemd_252.39-1~deb12u1_amd64.deb ...
Unpacking libpam-systemd:amd64 (252.39-1~deb12u1) over (252.36-1~deb12u1) ...
Preparing to unpack .../libssl3_3.0.17-1~deb12u3_amd64.deb ...
Unpacking libssl3:amd64 (3.0.17-1~deb12u3) over (3.0.15-1~deb12u1) ...
Preparing to unpack .../systemd-timesyncd_252.39-1~deb12u1_amd64.deb ...
Unpacking systemd-timesyncd (252.39-1~deb12u1) over (252.36-1~deb12u1) ...
Setting up libssl3:amd64 (3.0.17-1~deb12u3) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20786 files and directories currently installed.)
Preparing to unpack .../systemd_252.39-1~deb12u1_amd64.deb ...
Unpacking systemd (252.39-1~deb12u1) over (252.36-1~deb12u1) ...
Preparing to unpack .../systemd-resolved_252.39-1~deb12u1_amd64.deb ...
Unpacking systemd-resolved (252.39-1~deb12u1) over (252.36-1~deb12u1) ...
Preparing to unpack .../libsystemd-shared_252.39-1~deb12u1_amd64.deb ...
Unpacking libsystemd-shared:amd64 (252.39-1~deb12u1) over (252.36-1~deb12u1) ...
Preparing to unpack .../libsystemd0_252.39-1~deb12u1_amd64.deb ...
Unpacking libsystemd0:amd64 (252.39-1~deb12u1) over (252.36-1~deb12u1) ...
Setting up libsystemd0:amd64 (252.39-1~deb12u1) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20787 files and directories currently installed.)
Preparing to unpack .../udev_252.39-1~deb12u1_amd64.deb ...
Unpacking udev (252.39-1~deb12u1) over (252.36-1~deb12u1) ...
Preparing to unpack .../libudev1_252.39-1~deb12u1_amd64.deb ...
Unpacking libudev1:amd64 (252.39-1~deb12u1) over (252.36-1~deb12u1) ...
Setting up libudev1:amd64 (252.39-1~deb12u1) ...
Setting up libsystemd-shared:amd64 (252.39-1~deb12u1) ...
Setting up systemd (252.39-1~deb12u1) ...
Setting up systemd-sysv (252.39-1~deb12u1) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20788 files and directories currently installed.)
Preparing to unpack .../init_1.65.2+deb12u1_amd64.deb ...
Unpacking init (1.65.2+deb12u1) over (1.65.2) ...
Preparing to unpack .../passwd_1%3a4.13+dfsg1-1+deb12u1_amd64.deb ...
Unpacking passwd (1:4.13+dfsg1-1+deb12u1) over (1:4.13+dfsg1-1+b1) ...
Setting up passwd (1:4.13+dfsg1-1+deb12u1) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20787 files and directories currently installed.)
Preparing to unpack .../00-libgssapi-krb5-2_1.20.1-2+deb12u4_amd64.deb ...
Unpacking libgssapi-krb5-2:amd64 (1.20.1-2+deb12u4) over (1.20.1-2+deb12u2) ...
Preparing to unpack .../01-libkrb5-3_1.20.1-2+deb12u4_amd64.deb ...
Unpacking libkrb5-3:amd64 (1.20.1-2+deb12u4) over (1.20.1-2+deb12u2) ...
Preparing to unpack .../02-libkrb5support0_1.20.1-2+deb12u4_amd64.deb ...
Unpacking libkrb5support0:amd64 (1.20.1-2+deb12u4) over (1.20.1-2+deb12u2) ...
Preparing to unpack .../03-libk5crypto3_1.20.1-2+deb12u4_amd64.deb ...
Unpacking libk5crypto3:amd64 (1.20.1-2+deb12u4) over (1.20.1-2+deb12u2) ...
Preparing to unpack .../04-libcom-err2_1.47.0-2+b2_amd64.deb ...
Unpacking libcom-err2:amd64 (1.47.0-2+b2) over (1.47.0-2) ...
Preparing to unpack .../05-openssh-sftp-server_1%3a9.2p1-2+deb12u7_amd64.deb ...
Unpacking openssh-sftp-server (1:9.2p1-2+deb12u7) over (1:9.2p1-2+deb12u5) ...
Preparing to unpack .../06-openssh-server_1%3a9.2p1-2+deb12u7_amd64.deb ...
Unpacking openssh-server (1:9.2p1-2+deb12u7) over (1:9.2p1-2+deb12u5) ...
Preparing to unpack .../07-openssh-client_1%3a9.2p1-2+deb12u7_amd64.deb ...
Unpacking openssh-client (1:9.2p1-2+deb12u7) over (1:9.2p1-2+deb12u5) ...
Preparing to unpack .../08-python3.11_3.11.2-6+deb12u6_amd64.deb ...
Unpacking python3.11 (3.11.2-6+deb12u6) over (3.11.2-6+deb12u5) ...
Preparing to unpack .../09-libpython3.11-stdlib_3.11.2-6+deb12u6_amd64.deb ...
Unpacking libpython3.11-stdlib:amd64 (3.11.2-6+deb12u6) over (3.11.2-6+deb12u5) ...
Preparing to unpack .../10-python3.11-minimal_3.11.2-6+deb12u6_amd64.deb ...
Unpacking python3.11-minimal (3.11.2-6+deb12u6) over (3.11.2-6+deb12u5) ...
Preparing to unpack .../11-libpython3.11-minimal_3.11.2-6+deb12u6_amd64.deb ...
Unpacking libpython3.11-minimal:amd64 (3.11.2-6+deb12u6) over (3.11.2-6+deb12u5) ...
Preparing to unpack .../12-libsqlite3-0_3.40.1-2+deb12u2_amd64.deb ...
Unpacking libsqlite3-0:amd64 (3.40.1-2+deb12u2) over (3.40.1-2+deb12u1) ...
Preparing to unpack .../13-libexpat1_2.5.0-1+deb12u2_amd64.deb ...
Unpacking libexpat1:amd64 (2.5.0-1+deb12u2) over (2.5.0-1+deb12u1) ...
Preparing to unpack .../14-sudo_1.9.13p3-1+deb12u2_amd64.deb ...
Unpacking sudo (1.9.13p3-1+deb12u2) over (1.9.13p3-1+deb12u1) ...
Preparing to unpack .../15-debian-archive-keyring_2023.3+deb12u2_all.deb ...
Unpacking debian-archive-keyring (2023.3+deb12u2) over (2023.3+deb12u1) ...
Setting up debian-archive-keyring (2023.3+deb12u2) ...
Removing obsolete conffile /etc/apt/trusted.gpg.d/debian-archive-buster-stable.asc ...
Removing obsolete conffile /etc/apt/trusted.gpg.d/debian-archive-buster-security-automatic.asc ...
Removing obsolete conffile /etc/apt/trusted.gpg.d/debian-archive-buster-automatic.asc ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20788 files and directories currently installed.)
Preparing to unpack .../gpgv_2.2.40-1.1+deb12u1_amd64.deb ...
Unpacking gpgv (2.2.40-1.1+deb12u1) over (2.2.40-1.1) ...
Setting up gpgv (2.2.40-1.1+deb12u1) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20788 files and directories currently installed.)
Preparing to unpack .../libgnutls30_3.7.9-2+deb12u5_amd64.deb ...
Unpacking libgnutls30:amd64 (3.7.9-2+deb12u5) over (3.7.9-2+deb12u4) ...
Setting up libgnutls30:amd64 (3.7.9-2+deb12u5) ...
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 20788 files and directories currently installed.)
Preparing to unpack .../00-tzdata_2025b-0+deb12u2_all.deb ...
Unpacking tzdata (2025b-0+deb12u2) over (2025b-0+deb12u1) ...
Preparing to unpack .../01-libicu72_72.1-3+deb12u1_amd64.deb ...
Unpacking libicu72:amd64 (72.1-3+deb12u1) over (72.1-3) ...
Preparing to unpack .../02-libxml2_2.9.14+dfsg-1.3~deb12u4_amd64.deb ...
Unpacking libxml2:amd64 (2.9.14+dfsg-1.3~deb12u4) over (2.9.14+dfsg-1.3~deb12u1) ...
Preparing to unpack .../03-bind9-host_1%3a9.18.41-1~deb12u1_amd64.deb ...
Unpacking bind9-host (1:9.18.41-1~deb12u1) over (1:9.18.33-1~deb12u2) ...
Preparing to unpack .../04-bind9-libs_1%3a9.18.41-1~deb12u1_amd64.deb ...
Unpacking bind9-libs:amd64 (1:9.18.41-1~deb12u1) over (1:9.18.33-1~deb12u2) ...
Preparing to unpack .../05-openssl_3.0.17-1~deb12u3_amd64.deb ...
Unpacking openssl (3.0.17-1~deb12u3) over (3.0.15-1~deb12u1) ...
Preparing to unpack .../06-ca-certificates_20230311+deb12u1_all.deb ...
Unpacking ca-certificates (20230311+deb12u1) over (20230311) ...
Preparing to unpack .../07-libc-l10n_2.36-9+deb12u13_all.deb ...
Unpacking libc-l10n (2.36-9+deb12u13) over (2.36-9+deb12u10) ...
Preparing to unpack .../08-locales_2.36-9+deb12u13_all.deb ...
Unpacking locales (2.36-9+deb12u13) over (2.36-9+deb12u10) ...
Preparing to unpack .../09-python3-jinja2_3.1.2-1+deb12u3_all.deb ...
Unpacking python3-jinja2 (3.1.2-1+deb12u3) over (3.1.2-1+deb12u2) ...
Preparing to unpack .../10-cloud-init_22.4.2-1+deb12u3_all.deb ...
Unpacking cloud-init (22.4.2-1+deb12u3) over (22.4.2-1+deb12u2) ...
Preparing to unpack .../11-curl_7.88.1-10+deb12u14_amd64.deb ...
Unpacking curl (7.88.1-10+deb12u14) over (7.88.1-10+deb12u12) ...
Preparing to unpack .../12-libcurl4_7.88.1-10+deb12u14_amd64.deb ...
Unpacking libcurl4:amd64 (7.88.1-10+deb12u14) over (7.88.1-10+deb12u12) ...
Preparing to unpack .../13-distro-info-data_0.58+deb12u5_all.deb ...
Unpacking distro-info-data (0.58+deb12u5) over (0.58+deb12u3) ...
Selecting previously unselected package firmware-linux-free.
Preparing to unpack .../14-firmware-linux-free_20200122-1_all.deb ...
Unpacking firmware-linux-free (20200122-1) ...
Preparing to unpack .../15-libbpf1_1%3a1.1.2-0+deb12u1_amd64.deb ...
Unpacking libbpf1:amd64 (1:1.1.2-0+deb12u1) over (1:1.1.0-1) ...
Preparing to unpack .../16-libcap2-bin_1%3a2.66-4+deb12u2_amd64.deb ...
Unpacking libcap2-bin (1:2.66-4+deb12u2) over (1:2.66-4) ...
Preparing to unpack .../17-libcurl3-gnutls_7.88.1-10+deb12u14_amd64.deb ...
Unpacking libcurl3-gnutls:amd64 (7.88.1-10+deb12u14) over (7.88.1-10+deb12u12) ...
Preparing to unpack .../18-libglib2.0-0_2.74.6-2+deb12u7_amd64.deb ...
Unpacking libglib2.0-0:amd64 (2.74.6-2+deb12u7) over (2.74.6-2+deb12u5) ...
Preparing to unpack .../19-libnss-myhostname_252.39-1~deb12u1_amd64.deb ...
Unpacking libnss-myhostname:amd64 (252.39-1~deb12u1) over (252.36-1~deb12u1) ...
Preparing to unpack .../20-libss2_1.47.0-2+b2_amd64.deb ...
Unpacking libss2:amd64 (1.47.0-2+b2) over (1.47.0-2) ...
Selecting previously unselected package linux-image-6.1.0-41-cloud-amd64.
Preparing to unpack .../21-linux-image-6.1.0-41-cloud-amd64_6.1.158-1_amd64.deb ...
Unpacking linux-image-6.1.0-41-cloud-amd64 (6.1.158-1) ...
Preparing to unpack .../22-linux-image-cloud-amd64_6.1.158-1_amd64.deb ...
Unpacking linux-image-cloud-amd64 (6.1.158-1) over (6.1.135-1) ...
Preparing to unpack .../23-python3-pkg-resources_66.1.1-1+deb12u2_all.deb ...
Unpacking python3-pkg-resources (66.1.1-1+deb12u2) over (66.1.1-1+deb12u1) ...
Preparing to unpack .../24-qemu-utils_1%3a7.2+dfsg-7+deb12u16_amd64.deb ...
Unpacking qemu-utils (1:7.2+dfsg-7+deb12u16) over (1:7.2+dfsg-7+deb12u12) ...
Setting up python3-pkg-resources (66.1.1-1+deb12u2) ...
Setting up libexpat1:amd64 (2.5.0-1+deb12u2) ...
Setting up libc-l10n (2.36-9+deb12u13) ...
Setting up libicu72:amd64 (72.1-3+deb12u1) ...
Setting up init (1.65.2+deb12u1) ...
Setting up firmware-linux-free (20200122-1) ...
Setting up libglib2.0-0:amd64 (2.74.6-2+deb12u7) ...
No schema files found: doing nothing.
Setting up distro-info-data (0.58+deb12u5) ...
Setting up libsqlite3-0:amd64 (3.40.1-2+deb12u2) ...
Setting up libcom-err2:amd64 (1.47.0-2+b2) ...
Setting up locales (2.36-9+deb12u13) ...
Generating locales (this might take a while)...
Generation complete.
Setting up libkrb5support0:amd64 (1.20.1-2+deb12u4) ...
Setting up tzdata (2025b-0+deb12u2) ...

Current default time zone: 'Europe/Berlin'
Local time is now:      Sun Dec  7 16:41:13 CET 2025.
Universal Time is now:  Sun Dec  7 15:41:13 UTC 2025.
Run 'dpkg-reconfigure tzdata' if you wish to change it.

Setting up libcap2-bin (1:2.66-4+deb12u2) ...
Setting up python3-jinja2 (3.1.2-1+deb12u3) ...
Setting up systemd-timesyncd (252.39-1~deb12u1) ...
Setting up udev (252.39-1~deb12u1) ...
Setting up libss2:amd64 (1.47.0-2+b2) ...
Setting up libnss-myhostname:amd64 (252.39-1~deb12u1) ...
Setting up sudo (1.9.13p3-1+deb12u2) ...
Setting up libk5crypto3:amd64 (1.20.1-2+deb12u4) ...
Setting up logsave (1.47.0-2+b2) ...
Setting up libpam-systemd:amd64 (252.39-1~deb12u1) ...
Setting up libkrb5-3:amd64 (1.20.1-2+deb12u4) ...
Setting up libpython3.11-minimal:amd64 (3.11.2-6+deb12u6) ...
Setting up qemu-utils (1:7.2+dfsg-7+deb12u16) ...
Setting up initramfs-tools-core (0.142+deb12u3) ...
Setting up openssl (3.0.17-1~deb12u3) ...
Setting up libxml2:amd64 (2.9.14+dfsg-1.3~deb12u4) ...
Setting up libbpf1:amd64 (1:1.1.2-0+deb12u1) ...
Setting up systemd-resolved (252.39-1~deb12u1) ...
Setting up python3.11-minimal (3.11.2-6+deb12u6) ...
Setting up cloud-init (22.4.2-1+deb12u3) ...
Setting up initramfs-tools (0.142+deb12u3) ...
update-initramfs: deferring update (trigger activated)
Setting up libpython3.11-stdlib:amd64 (3.11.2-6+deb12u6) ...
Setting up e2fsprogs (1.47.0-2+b2) ...
update-initramfs: deferring update (trigger activated)
e2scrub_all.service is a disabled or a static unit not running, not starting it.
Setting up ca-certificates (20230311+deb12u1) ...
Updating certificates in /etc/ssl/certs...
rehash: warning: skipping ca-certificates.crt,it does not contain exactly one certificate or CRL
2 added, 0 removed; done.
Setting up linux-image-6.1.0-41-cloud-amd64 (6.1.158-1) ...
/etc/kernel/postinst.d/initramfs-tools:
update-initramfs: Generating /boot/initrd.img-6.1.0-41-cloud-amd64
/etc/kernel/postinst.d/zz-update-grub:
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-6.1.0-41-cloud-amd64
Found initrd image: /boot/initrd.img-6.1.0-41-cloud-amd64
Found linux image: /boot/vmlinuz-6.1.0-34-cloud-amd64
Found initrd image: /boot/initrd.img-6.1.0-34-cloud-amd64
done
Setting up libgssapi-krb5-2:amd64 (1.20.1-2+deb12u4) ...
Setting up linux-image-cloud-amd64 (6.1.158-1) ...
Setting up libcurl4:amd64 (7.88.1-10+deb12u14) ...
Setting up curl (7.88.1-10+deb12u14) ...
Setting up python3.11 (3.11.2-6+deb12u6) ...
Setting up bind9-libs:amd64 (1:9.18.41-1~deb12u1) ...
Setting up openssh-client (1:9.2p1-2+deb12u7) ...
Setting up libcurl3-gnutls:amd64 (7.88.1-10+deb12u14) ...
Setting up bind9-host (1:9.18.41-1~deb12u1) ...
Setting up openssh-sftp-server (1:9.2p1-2+deb12u7) ...
Setting up openssh-server (1:9.2p1-2+deb12u7) ...
rescue-ssh.target is a disabled or a static unit not running, not starting it.
ssh.socket is a disabled or a static unit not running, not starting it.
Processing triggers for systemd (252.39-1~deb12u1) ...
Processing triggers for man-db (2.11.2-2) ...
Processing triggers for dbus (1.14.10-1~deb12u1) ...
Processing triggers for debianutils (5.7-0.5~deb12u1) ...
Processing triggers for libc-bin (2.36-9+deb12u13) ...
Processing triggers for initramfs-tools (0.142+deb12u3) ...
update-initramfs: Generating /boot/initrd.img-6.1.0-41-cloud-amd64
Processing triggers for ca-certificates (20230311+deb12u1) ...
Updating certificates in /etc/ssl/certs...
0 added, 0 removed; done.
Running hooks in /etc/ca-certificates/update.d...
done.
Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
  bsd-mailx cron-daemon-common exim4-base exim4-config exim4-daemon-light
  libevent-2.1-7 libgnutls-dane0 libidn12 liblockfile-bin liblockfile1
  libunbound8
Suggested packages:
  anacron logrotate checksecurity exim4-doc-html | exim4-doc-info eximon4
  spf-tools-perl swaks dns-root-data
The following NEW packages will be installed:
  bsd-mailx cron cron-daemon-common exim4-base exim4-config exim4-daemon-light
  libevent-2.1-7 libgnutls-dane0 libidn12 liblockfile-bin liblockfile1
  libunbound8
0 upgraded, 12 newly installed, 0 to remove and 0 not upgraded.
Need to get 3417 kB of archives.
After this operation, 7211 kB of additional disk space will be used.
Get:1 file:/etc/apt/mirrors/debian.list Mirrorlist [30 B]
Get:2 https://deb.debian.org/debian bookworm/main amd64 cron-daemon-common all 3.0pl1-162 [12.7 kB]
Get:3 https://deb.debian.org/debian bookworm/main amd64 cron amd64 3.0pl1-162 [73.1 kB]
Get:4 https://deb.debian.org/debian bookworm/main amd64 liblockfile-bin amd64 1.17-1+b1 [20.8 kB]
Get:5 https://deb.debian.org/debian bookworm/main amd64 exim4-config all 4.96-15+deb12u7 [256 kB]
Get:6 https://deb.debian.org/debian bookworm/main amd64 exim4-base amd64 4.96-15+deb12u7 [1118 kB]
Get:7 https://deb.debian.org/debian bookworm/main amd64 libevent-2.1-7 amd64 2.1.12-stable-8 [180 kB]
Get:8 https://deb.debian.org/debian bookworm/main amd64 libunbound8 amd64 1.17.1-2+deb12u3 [553 kB]
Get:9 https://deb.debian.org/debian bookworm/main amd64 libgnutls-dane0 amd64 3.7.9-2+deb12u5 [407 kB]
Get:10 https://deb.debian.org/debian bookworm/main amd64 libidn12 amd64 1.41-1 [83.8 kB]
Get:11 https://deb.debian.org/debian bookworm/main amd64 exim4-daemon-light amd64 4.96-15+deb12u7 [605 kB]
Get:12 https://deb.debian.org/debian bookworm/main amd64 liblockfile1 amd64 1.17-1+b1 [17.0 kB]
Get:13 https://deb.debian.org/debian bookworm/main amd64 bsd-mailx amd64 8.1.2-0.20220412cvs-1 [90.4 kB]
Preconfiguring packages ...
Fetched 3417 kB in 0s (11.0 MB/s)
Selecting previously unselected package cron-daemon-common.
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 22200 files and directories currently installed.)
Preparing to unpack .../cron-daemon-common_3.0pl1-162_all.deb ...
Unpacking cron-daemon-common (3.0pl1-162) ...
Setting up cron-daemon-common (3.0pl1-162) ...
Adding group `crontab' (GID 109) ...
Done.
Selecting previously unselected package cron.
(Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 22217 files and directories currently installed.)
Preparing to unpack .../00-cron_3.0pl1-162_amd64.deb ...
Unpacking cron (3.0pl1-162) ...
Selecting previously unselected package liblockfile-bin.
Preparing to unpack .../01-liblockfile-bin_1.17-1+b1_amd64.deb ...
Unpacking liblockfile-bin (1.17-1+b1) ...
Selecting previously unselected package exim4-config.
Preparing to unpack .../02-exim4-config_4.96-15+deb12u7_all.deb ...
Unpacking exim4-config (4.96-15+deb12u7) ...
Selecting previously unselected package exim4-base.
Preparing to unpack .../03-exim4-base_4.96-15+deb12u7_amd64.deb ...
Unpacking exim4-base (4.96-15+deb12u7) ...
Selecting previously unselected package libevent-2.1-7:amd64.
Preparing to unpack .../04-libevent-2.1-7_2.1.12-stable-8_amd64.deb ...
Unpacking libevent-2.1-7:amd64 (2.1.12-stable-8) ...
Selecting previously unselected package libunbound8:amd64.
Preparing to unpack .../05-libunbound8_1.17.1-2+deb12u3_amd64.deb ...
Unpacking libunbound8:amd64 (1.17.1-2+deb12u3) ...
Selecting previously unselected package libgnutls-dane0:amd64.
Preparing to unpack .../06-libgnutls-dane0_3.7.9-2+deb12u5_amd64.deb ...
Unpacking libgnutls-dane0:amd64 (3.7.9-2+deb12u5) ...
Selecting previously unselected package libidn12:amd64.
Preparing to unpack .../07-libidn12_1.41-1_amd64.deb ...
Unpacking libidn12:amd64 (1.41-1) ...
Selecting previously unselected package exim4-daemon-light.
Preparing to unpack .../08-exim4-daemon-light_4.96-15+deb12u7_amd64.deb ...
Unpacking exim4-daemon-light (4.96-15+deb12u7) ...
Selecting previously unselected package liblockfile1:amd64.
Preparing to unpack .../09-liblockfile1_1.17-1+b1_amd64.deb ...
Unpacking liblockfile1:amd64 (1.17-1+b1) ...
Selecting previously unselected package bsd-mailx.
Preparing to unpack .../10-bsd-mailx_8.1.2-0.20220412cvs-1_amd64.deb ...
Unpacking bsd-mailx (8.1.2-0.20220412cvs-1) ...
Setting up liblockfile-bin (1.17-1+b1) ...
Setting up cron (3.0pl1-162) ...
Created symlink /etc/systemd/system/multi-user.target.wants/cron.service → /lib/systemd/system/cron.service.

Setting up libidn12:amd64 (1.41-1) ...
Setting up libevent-2.1-7:amd64 (2.1.12-stable-8) ...
Setting up exim4-config (4.96-15+deb12u7) ...
Adding system-user for exim (v4)
Setting up liblockfile1:amd64 (1.17-1+b1) ...
Setting up exim4-base (4.96-15+deb12u7) ...
exim: DB upgrade, deleting hints-db
Created symlink /etc/systemd/system/timers.target.wants/exim4-base.timer → /lib/systemd/system/exim4-base.timer.

exim4-base.service is a disabled or a static unit, not starting it.
Setting up libunbound8:amd64 (1.17.1-2+deb12u3) ...
Setting up libgnutls-dane0:amd64 (3.7.9-2+deb12u5) ...
Setting up exim4-daemon-light (4.96-15+deb12u7) ...
Setting up bsd-mailx (8.1.2-0.20220412cvs-1) ...
update-alternatives: using /usr/bin/bsd-mailx to provide /usr/bin/mailx (mailx) in auto mode
Processing triggers for man-db (2.11.2-2) ...
Processing triggers for libc-bin (2.36-9+deb12u13) ...
2025-12-07 15:41:51,653 - ug_util.py[WARNING]: DEPRECATED: 'user' of type string is deprecated and will be removed in a future release. Use 'users' list instead.
Cloud-init v. 22.4.2 finished at Sun, 07 Dec 2025 15:41:51 +0000. Datasource DataSourceNoCloud [seed=/dev/sr0][dsmode=net].  Up 90.56 seconds
Cloud-init v. 22.4.2 running 'init-local' at Sun, 07 Dec 2025 16:06:03 +0000. Up 3.72 seconds.
Cloud-init v. 22.4.2 running 'modules:config' at Sun, 07 Dec 2025 16:06:17 +0000. Up 18.39 seconds.
Cloud-init v. 22.4.2 running 'modules:final' at Sun, 07 Dec 2025 16:06:18 +0000. Up 18.77 seconds.
Cloud-init v. 22.4.2 finished at Sun, 07 Dec 2025 16:06:18 +0000. Datasource DataSourceNoCloud [seed=/dev/sr0][dsmode=net].  Up 18.85 seconds
Cloud-init v. 22.4.2 running 'init-local' at Sun, 07 Dec 2025 16:55:51 +0000. Up 4.04 seconds.
Cloud-init v. 22.4.2 running 'modules:config' at Sun, 07 Dec 2025 16:56:05 +0000. Up 18.39 seconds.
Cloud-init v. 22.4.2 running 'modules:final' at Sun, 07 Dec 2025 16:56:06 +0000. Up 18.77 seconds.
Cloud-init v. 22.4.2 finished at Sun, 07 Dec 2025 16:56:06 +0000. Datasource DataSourceNoCloud [seed=/dev/sr0][dsmode=net].  Up 18.85 seconds
Cloud-init v. 22.4.2 running 'init-local' at Tue, 13 Jan 2026 22:24:47 +0000. Up 4.43 seconds.
Cloud-init v. 22.4.2 running 'modules:config' at Tue, 13 Jan 2026 22:25:02 +0000. Up 18.90 seconds.
Cloud-init v. 22.4.2 running 'modules:final' at Tue, 13 Jan 2026 22:25:02 +0000. Up 19.34 seconds.
Cloud-init v. 22.4.2 finished at Tue, 13 Jan 2026 22:25:02 +0000. Datasource DataSourceNoCloud [seed=/dev/sr0][dsmode=net].  Up 19.41 seconds

./old-debian12/var/log/cloud-init.log

2025-12-07 15:40:24,503 - util.py[DEBUG]: Cloud-init v. 22.4.2 running 'init-local' at Sun, 07 Dec 2025 15:40:24 +0000. Up 4.00 seconds.
2025-12-07 15:40:24,504 - main.py[DEBUG]: No kernel command line url found.
2025-12-07 15:40:24,504 - main.py[DEBUG]: Closing stdin.
2025-12-07 15:40:24,506 - util.py[DEBUG]: Writing to /var/log/cloud-init.log - ab: [644] 0 bytes
2025-12-07 15:40:24,506 - util.py[DEBUG]: Changing the ownership of /var/log/cloud-init.log to 0:4
2025-12-07 15:40:24,506 - util.py[DEBUG]: Writing to /var/lib/cloud/data/python-version - wb: [644] 4 bytes
2025-12-07 15:40:24,506 - util.py[DEBUG]: Attempting to remove /var/lib/cloud/instance/boot-finished
2025-12-07 15:40:24,506 - handlers.py[DEBUG]: start: init-local/check-cache: attempting to read from cache [check]
2025-12-07 15:40:24,506 - util.py[DEBUG]: Reading from /var/lib/cloud/instance/obj.pkl (quiet=False)
2025-12-07 15:40:24,507 - stages.py[DEBUG]: no cache found
2025-12-07 15:40:24,507 - handlers.py[DEBUG]: finish: init-local/check-cache: SUCCESS: no cache found
2025-12-07 15:40:24,507 - util.py[DEBUG]: Attempting to remove /var/lib/cloud/instance
2025-12-07 15:40:24,510 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2025-12-07 15:40:24,511 - __init__.py[DEBUG]: Looking for data source in: ['NoCloud', 'None'], via packages ['', 'cloudinit.sources'] that matches dependencies ['FILESYSTEM']
2025-12-07 15:40:24,512 - __init__.py[DEBUG]: Searching for local data source in: ['DataSourceNoCloud']
2025-12-07 15:40:24,512 - handlers.py[DEBUG]: start: init-local/search-NoCloud: searching for local data from DataSourceNoCloud
2025-12-07 15:40:24,512 - __init__.py[DEBUG]: Seeing if we can get any data from <class 'cloudinit.sources.DataSourceNoCloud.DataSourceNoCloud'>
2025-12-07 15:40:24,512 - __init__.py[DEBUG]: Update datasource metadata and network config due to events: boot-new-instance
2025-12-07 15:40:24,512 - dmi.py[DEBUG]: querying dmi data /sys/class/dmi/id/product_serial
2025-12-07 15:40:24,512 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud/user-data (quiet=False)
2025-12-07 15:40:24,513 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud/meta-data (quiet=False)
2025-12-07 15:40:24,513 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud/vendor-data (quiet=False)
2025-12-07 15:40:24,513 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud/network-config (quiet=False)
2025-12-07 15:40:24,513 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud-net/user-data (quiet=False)
2025-12-07 15:40:24,513 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud-net/meta-data (quiet=False)
2025-12-07 15:40:24,513 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud-net/vendor-data (quiet=False)
2025-12-07 15:40:24,513 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud-net/network-config (quiet=False)
2025-12-07 15:40:24,513 - subp.py[DEBUG]: Running command ['blkid', '-tTYPE=vfat', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2025-12-07 15:40:24,595 - subp.py[DEBUG]: Running command ['blkid', '-tTYPE=iso9660', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2025-12-07 15:40:24,602 - subp.py[DEBUG]: Running command ['blkid', '-tLABEL=CIDATA', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2025-12-07 15:40:24,609 - subp.py[DEBUG]: Running command ['blkid', '-tLABEL=cidata', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2025-12-07 15:40:24,617 - subp.py[DEBUG]: Running command ['blkid', '-tLABEL_FATBOOT=cidata', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2025-12-07 15:40:24,624 - DataSourceNoCloud.py[DEBUG]: Attempting to use data from /dev/sr0
2025-12-07 15:40:24,624 - util.py[DEBUG]: Reading from /proc/mounts (quiet=False)
2025-12-07 15:40:24,624 - util.py[DEBUG]: Read 1907 bytes from /proc/mounts
2025-12-07 15:40:24,624 - util.py[DEBUG]: Fetched {'sysfs': {'fstype': 'sysfs', 'mountpoint': '/sys', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'proc': {'fstype': 'proc', 'mountpoint': '/proc', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'udev': {'fstype': 'devtmpfs', 'mountpoint': '/dev', 'opts': 'rw,nosuid,relatime,size=6118932k,nr_inodes=1529733,mode=755,inode64'}, 'devpts': {'fstype': 'devpts', 'mountpoint': '/dev/pts', 'opts': 'rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000'}, 'tmpfs': {'fstype': 'tmpfs', 'mountpoint': '/etc/machine-id', 'opts': 'ro,relatime,size=1226020k,mode=755,inode64'}, '/dev/sda1': {'fstype': 'ext4', 'mountpoint': '/', 'opts': 'rw,relatime,discard,errors=remount-ro'}, 'securityfs': {'fstype': 'securityfs', 'mountpoint': '/sys/kernel/security', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'cgroup2': {'fstype': 'cgroup2', 'mountpoint': '/sys/fs/cgroup', 'opts': 'rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot'}, 'pstore': {'fstype': 'pstore', 'mountpoint': '/sys/fs/pstore', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'bpf': {'fstype': 'bpf', 'mountpoint': '/sys/fs/bpf', 'opts': 'rw,nosuid,nodev,noexec,relatime,mode=700'}, 'systemd-1': {'fstype': 'autofs', 'mountpoint': '/proc/sys/fs/binfmt_misc', 'opts': 'rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=1346'}, 'hugetlbfs': {'fstype': 'hugetlbfs', 'mountpoint': '/dev/hugepages', 'opts': 'rw,relatime,pagesize=2M'}, 'mqueue': {'fstype': 'mqueue', 'mountpoint': '/dev/mqueue', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'debugfs': {'fstype': 'debugfs', 'mountpoint': '/sys/kernel/debug', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'tracefs': {'fstype': 'tracefs', 'mountpoint': '/sys/kernel/tracing', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'fusectl': {'fstype': 'fusectl', 'mountpoint': '/sys/fs/fuse/connections', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'configfs': {'fstype': 'configfs', 'mountpoint': '/sys/kernel/config', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'ramfs': {'fstype': 'ramfs', 'mountpoint': '/run/credentials/systemd-tmpfiles-setup-dev.service', 'opts': 'ro,nosuid,nodev,noexec,relatime,mode=700'}, '/dev/sda15': {'fstype': 'vfat', 'mountpoint': '/boot/efi', 'opts': 'rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro'}} mounts from proc
2025-12-07 15:40:24,625 - subp.py[DEBUG]: Running command ['mount', '-o', 'ro', '-t', 'auto', '/dev/sr0', '/run/cloud-init/tmp/tmpy9fm0oqn'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:24,707 - util.py[DEBUG]: Reading from /run/cloud-init/tmp/tmpy9fm0oqn//user-data (quiet=False)
2025-12-07 15:40:24,708 - util.py[DEBUG]: Read 1714 bytes from /run/cloud-init/tmp/tmpy9fm0oqn//user-data
2025-12-07 15:40:24,708 - util.py[DEBUG]: Reading from /run/cloud-init/tmp/tmpy9fm0oqn//meta-data (quiet=False)
2025-12-07 15:40:24,708 - util.py[DEBUG]: Read 54 bytes from /run/cloud-init/tmp/tmpy9fm0oqn//meta-data
2025-12-07 15:40:24,708 - util.py[DEBUG]: Reading from /run/cloud-init/tmp/tmpy9fm0oqn//vendor-data (quiet=False)
2025-12-07 15:40:24,709 - util.py[DEBUG]: Read 0 bytes from /run/cloud-init/tmp/tmpy9fm0oqn//vendor-data
2025-12-07 15:40:24,709 - util.py[DEBUG]: Reading from /run/cloud-init/tmp/tmpy9fm0oqn//network-config (quiet=False)
2025-12-07 15:40:24,709 - util.py[DEBUG]: Read 455 bytes from /run/cloud-init/tmp/tmpy9fm0oqn//network-config
2025-12-07 15:40:24,710 - subp.py[DEBUG]: Running command ['umount', '/run/cloud-init/tmp/tmpy9fm0oqn'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:24,714 - util.py[DEBUG]: Attempting to load yaml from string of length 54 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:24,715 - util.py[DEBUG]: Attempting to load yaml from string of length 455 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:24,717 - DataSourceNoCloud.py[DEBUG]: Using data from /dev/sr0
2025-12-07 15:40:24,718 - util.py[DEBUG]: Reading from /etc/hosts (quiet=False)
2025-12-07 15:40:24,718 - util.py[DEBUG]: Read 109 bytes from /etc/hosts
2025-12-07 15:40:24,719 - util.py[DEBUG]: Writing to /run/cloud-init/cloud-id-nocloud - wb: [644] 8 bytes
2025-12-07 15:40:24,720 - util.py[DEBUG]: Creating symbolic link from '/run/cloud-init/cloud-id' => '/run/cloud-init/cloud-id-nocloud'
2025-12-07 15:40:24,720 - atomic_helper.py[DEBUG]: Atomically writing to file /run/cloud-init/instance-data-sensitive.json (via temporary file /run/cloud-init/tmp1zwzhuuo) - w: [600] 4835 bytes/chars
2025-12-07 15:40:24,721 - atomic_helper.py[DEBUG]: Atomically writing to file /run/cloud-init/instance-data.json (via temporary file /run/cloud-init/tmpol3jd6fx) - w: [644] 1521 bytes/chars
2025-12-07 15:40:24,721 - handlers.py[DEBUG]: finish: init-local/search-NoCloud: SUCCESS: found local data from DataSourceNoCloud
2025-12-07 15:40:24,721 - stages.py[INFO]: Loaded datasource DataSourceNoCloud - DataSourceNoCloud [seed=/dev/sr0][dsmode=net]
2025-12-07 15:40:24,722 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg (quiet=False)
2025-12-07 15:40:24,722 - util.py[DEBUG]: Read 2796 bytes from /etc/cloud/cloud.cfg
2025-12-07 15:40:24,722 - util.py[DEBUG]: Attempting to load yaml from string of length 2796 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:24,732 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/05_logging.cfg (quiet=False)
2025-12-07 15:40:24,732 - util.py[DEBUG]: Read 2070 bytes from /etc/cloud/cloud.cfg.d/05_logging.cfg
2025-12-07 15:40:24,732 - util.py[DEBUG]: Attempting to load yaml from string of length 2070 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:24,735 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg (quiet=False)
2025-12-07 15:40:24,736 - util.py[DEBUG]: Read 309 bytes from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg
2025-12-07 15:40:24,736 - util.py[DEBUG]: Attempting to load yaml from string of length 309 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:24,738 - util.py[DEBUG]: Reading from /run/cloud-init/cloud.cfg (quiet=False)
2025-12-07 15:40:24,738 - util.py[DEBUG]: Read 35 bytes from /run/cloud-init/cloud.cfg
2025-12-07 15:40:24,738 - util.py[DEBUG]: Attempting to load yaml from string of length 35 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:24,739 - util.py[DEBUG]: Attempting to load yaml from string of length 0 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:24,739 - util.py[DEBUG]: loaded blob returned None, returning default.
2025-12-07 15:40:24,740 - util.py[DEBUG]: Attempting to remove /var/lib/cloud/instance
2025-12-07 15:40:24,740 - util.py[DEBUG]: Creating symbolic link from '/var/lib/cloud/instance' => '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184'
2025-12-07 15:40:24,741 - util.py[DEBUG]: Reading from /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/datasource (quiet=False)
2025-12-07 15:40:24,741 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/datasource - wb: [644] 65 bytes
2025-12-07 15:40:24,741 - util.py[DEBUG]: Writing to /var/lib/cloud/data/previous-datasource - wb: [644] 65 bytes
2025-12-07 15:40:24,742 - util.py[DEBUG]: Reading from /var/lib/cloud/data/instance-id (quiet=False)
2025-12-07 15:40:24,742 - stages.py[DEBUG]: previous iid found to be NO_PREVIOUS_INSTANCE_ID
2025-12-07 15:40:24,742 - util.py[DEBUG]: Writing to /var/lib/cloud/data/instance-id - wb: [644] 41 bytes
2025-12-07 15:40:24,742 - util.py[DEBUG]: Writing to /run/cloud-init/.instance-id - wb: [644] 41 bytes
2025-12-07 15:40:24,743 - util.py[DEBUG]: Writing to /var/lib/cloud/data/previous-instance-id - wb: [644] 24 bytes
2025-12-07 15:40:24,743 - util.py[DEBUG]: Writing to /var/lib/cloud/instance/obj.pkl - wb: [400] 6516 bytes
2025-12-07 15:40:24,744 - main.py[DEBUG]: [local] init will now be targeting instance id: 3a7b79c34864e435b2e39df1a836248be4942184. new=True
2025-12-07 15:40:24,744 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg (quiet=False)
2025-12-07 15:40:24,744 - util.py[DEBUG]: Read 2796 bytes from /etc/cloud/cloud.cfg
2025-12-07 15:40:24,744 - util.py[DEBUG]: Attempting to load yaml from string of length 2796 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:24,751 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/05_logging.cfg (quiet=False)
2025-12-07 15:40:24,751 - util.py[DEBUG]: Read 2070 bytes from /etc/cloud/cloud.cfg.d/05_logging.cfg
2025-12-07 15:40:24,752 - util.py[DEBUG]: Attempting to load yaml from string of length 2070 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:24,754 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg (quiet=False)
2025-12-07 15:40:24,754 - util.py[DEBUG]: Read 309 bytes from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg
2025-12-07 15:40:24,754 - util.py[DEBUG]: Attempting to load yaml from string of length 309 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:24,756 - util.py[DEBUG]: Reading from /run/cloud-init/cloud.cfg (quiet=False)
2025-12-07 15:40:24,756 - util.py[DEBUG]: Read 35 bytes from /run/cloud-init/cloud.cfg
2025-12-07 15:40:24,756 - util.py[DEBUG]: Attempting to load yaml from string of length 35 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:24,756 - util.py[DEBUG]: Attempting to load yaml from string of length 0 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:24,756 - util.py[DEBUG]: loaded blob returned None, returning default.
2025-12-07 15:40:24,757 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2025-12-07 15:40:24,758 - util.py[DEBUG]: Reading from /sys/class/net/ens18/address (quiet=False)
2025-12-07 15:40:24,758 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/ens18/address
2025-12-07 15:40:24,758 - util.py[DEBUG]: Reading from /sys/class/net/lo/address (quiet=False)
2025-12-07 15:40:24,758 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/lo/address
2025-12-07 15:40:24,758 - util.py[DEBUG]: Reading from /sys/class/net/ens18/address (quiet=False)
2025-12-07 15:40:24,758 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/ens18/address
2025-12-07 15:40:24,758 - util.py[DEBUG]: Reading from /sys/class/net/lo/address (quiet=False)
2025-12-07 15:40:24,759 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/lo/address
2025-12-07 15:40:24,759 - util.py[DEBUG]: Reading from /sys/class/net/eth0/device/device (quiet=False)
2025-12-07 15:40:24,759 - util.py[DEBUG]: Reading from /sys/class/net/ens18/addr_assign_type (quiet=False)
2025-12-07 15:40:24,759 - util.py[DEBUG]: Read 2 bytes from /sys/class/net/ens18/addr_assign_type
2025-12-07 15:40:24,759 - util.py[DEBUG]: Reading from /sys/class/net/ens18/uevent (quiet=False)
2025-12-07 15:40:24,759 - util.py[DEBUG]: Read 26 bytes from /sys/class/net/ens18/uevent
2025-12-07 15:40:24,759 - util.py[DEBUG]: Reading from /sys/class/net/ens18/address (quiet=False)
2025-12-07 15:40:24,759 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/ens18/address
2025-12-07 15:40:24,759 - __init__.py[DEBUG]: ovs-vsctl not in PATH; not detecting Open vSwitch interfaces
2025-12-07 15:40:24,760 - util.py[DEBUG]: Reading from /sys/class/net/ens18/device/device (quiet=False)
2025-12-07 15:40:24,760 - util.py[DEBUG]: Read 7 bytes from /sys/class/net/ens18/device/device
2025-12-07 15:40:24,760 - util.py[DEBUG]: Reading from /sys/class/net/lo/addr_assign_type (quiet=False)
2025-12-07 15:40:24,760 - util.py[DEBUG]: Read 2 bytes from /sys/class/net/lo/addr_assign_type
2025-12-07 15:40:24,760 - util.py[DEBUG]: Reading from /sys/class/net/lo/uevent (quiet=False)
2025-12-07 15:40:24,760 - util.py[DEBUG]: Read 23 bytes from /sys/class/net/lo/uevent
2025-12-07 15:40:24,760 - util.py[DEBUG]: Reading from /sys/class/net/lo/address (quiet=False)
2025-12-07 15:40:24,760 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/lo/address
2025-12-07 15:40:24,760 - util.py[DEBUG]: Reading from /sys/class/net/lo/device/device (quiet=False)
2025-12-07 15:40:24,760 - util.py[DEBUG]: Reading from /sys/class/net/ens18/type (quiet=False)
2025-12-07 15:40:24,760 - util.py[DEBUG]: Read 2 bytes from /sys/class/net/ens18/type
2025-12-07 15:40:24,760 - util.py[DEBUG]: Reading from /sys/class/net/lo/type (quiet=False)
2025-12-07 15:40:24,760 - util.py[DEBUG]: Read 4 bytes from /sys/class/net/lo/type
2025-12-07 15:40:24,760 - networking.py[DEBUG]: net: all expected physical devices present
2025-12-07 15:40:24,760 - stages.py[DEBUG]: applying net config names for {'version': 1, 'config': [{'type': 'physical', 'name': 'eth0', 'mac_address': '00:50:56:5e:95:7b', 'subnets': [{'type': 'static', 'address': '109.199.123.73', 'netmask': '255.255.240.0', 'gateway': '109.199.112.1'}, {'type': 'static6', 'address': '2a02:c207:2293:6396:0000:0000:0000:0001/64', 'gateway': 'fe80::1'}]}, {'type': 'nameserver', 'address': ['213.136.95.10', '213.136.95.11', '2a02:c207::1:53']}]}
2025-12-07 15:40:24,760 - util.py[DEBUG]: Reading from /sys/class/net/eth0/device/device (quiet=False)
2025-12-07 15:40:24,760 - util.py[DEBUG]: Reading from /sys/class/net/ens18/addr_assign_type (quiet=False)
2025-12-07 15:40:24,761 - util.py[DEBUG]: Read 2 bytes from /sys/class/net/ens18/addr_assign_type
2025-12-07 15:40:24,761 - util.py[DEBUG]: Reading from /sys/class/net/ens18/uevent (quiet=False)
2025-12-07 15:40:24,761 - util.py[DEBUG]: Read 26 bytes from /sys/class/net/ens18/uevent
2025-12-07 15:40:24,761 - util.py[DEBUG]: Reading from /sys/class/net/ens18/address (quiet=False)
2025-12-07 15:40:24,761 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/ens18/address
2025-12-07 15:40:24,761 - util.py[DEBUG]: Reading from /sys/class/net/ens18/device/device (quiet=False)
2025-12-07 15:40:24,761 - util.py[DEBUG]: Read 7 bytes from /sys/class/net/ens18/device/device
2025-12-07 15:40:24,761 - util.py[DEBUG]: Reading from /sys/class/net/lo/addr_assign_type (quiet=False)
2025-12-07 15:40:24,761 - util.py[DEBUG]: Read 2 bytes from /sys/class/net/lo/addr_assign_type
2025-12-07 15:40:24,761 - util.py[DEBUG]: Reading from /sys/class/net/lo/uevent (quiet=False)
2025-12-07 15:40:24,761 - util.py[DEBUG]: Read 23 bytes from /sys/class/net/lo/uevent
2025-12-07 15:40:24,761 - util.py[DEBUG]: Reading from /sys/class/net/lo/address (quiet=False)
2025-12-07 15:40:24,761 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/lo/address
2025-12-07 15:40:24,761 - util.py[DEBUG]: Reading from /sys/class/net/lo/device/device (quiet=False)
2025-12-07 15:40:24,761 - util.py[DEBUG]: Reading from /sys/class/net/ens18/operstate (quiet=False)
2025-12-07 15:40:24,761 - util.py[DEBUG]: Read 5 bytes from /sys/class/net/ens18/operstate
2025-12-07 15:40:24,761 - util.py[DEBUG]: Reading from /sys/class/net/lo/operstate (quiet=False)
2025-12-07 15:40:24,762 - util.py[DEBUG]: Read 8 bytes from /sys/class/net/lo/operstate
2025-12-07 15:40:24,762 - subp.py[DEBUG]: Running command ['ip', '-6', 'addr', 'show', 'permanent', 'scope', 'global'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:24,773 - subp.py[DEBUG]: Running command ['ip', '-4', 'addr', 'show'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:24,778 - __init__.py[DEBUG]: Detected interfaces {'ens18': {'downable': True, 'device_id': '0x0001', 'driver': 'virtio_net', 'mac': '00:50:56:5e:95:7b', 'name': 'ens18', 'up': False}, 'lo': {'downable': False, 'device_id': None, 'driver': None, 'mac': '00:00:00:00:00:00', 'name': 'lo', 'up': True}}
2025-12-07 15:40:24,778 - __init__.py[DEBUG]: achieving renaming of [['00:50:56:5e:95:7b', 'eth0', None, None]] with ops [('rename', '00:50:56:5e:95:7b', 'eth0', ('ens18', 'eth0'))]
2025-12-07 15:40:24,778 - subp.py[DEBUG]: Running command ['ip', 'link', 'set', 'ens18', 'name', 'eth0'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:24,804 - stages.py[INFO]: Applying network configuration from ds bringup=False: {'version': 1, 'config': [{'type': 'physical', 'name': 'eth0', 'mac_address': '00:50:56:5e:95:7b', 'subnets': [{'type': 'static', 'address': '109.199.123.73', 'netmask': '255.255.240.0', 'gateway': '109.199.112.1'}, {'type': 'static6', 'address': '2a02:c207:2293:6396:0000:0000:0000:0001/64', 'gateway': 'fe80::1'}]}, {'type': 'nameserver', 'address': ['213.136.95.10', '213.136.95.11', '2a02:c207::1:53']}]}
2025-12-07 15:40:24,804 - util.py[DEBUG]: Writing to /run/cloud-init/sem/apply_network_config.once - wb: [644] 24 bytes
2025-12-07 15:40:24,806 - __init__.py[DEBUG]: Selected renderer 'netplan' from priority list: None
2025-12-07 15:40:24,812 - subp.py[DEBUG]: Running command ['netplan', 'info'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:25,109 - util.py[DEBUG]: Attempting to load yaml from string of length 311 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:25,111 - util.py[DEBUG]: Writing to /etc/netplan/50-cloud-init.yaml - wb: [644] 812 bytes
2025-12-07 15:40:25,112 - subp.py[DEBUG]: Running command ['netplan', 'generate'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:25,498 - subp.py[DEBUG]: Running command ['udevadm', 'test-builtin', 'net_setup_link', '/sys/class/net/lo'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:25,505 - subp.py[DEBUG]: Running command ['udevadm', 'test-builtin', 'net_setup_link', '/sys/class/net/eth0'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:25,511 - __init__.py[DEBUG]: Not bringing up newly configured network interfaces
2025-12-07 15:40:25,511 - main.py[DEBUG]: [local] Exiting. datasource DataSourceNoCloud [seed=/dev/sr0][dsmode=net] not in local mode.
2025-12-07 15:40:25,511 - atomic_helper.py[DEBUG]: Atomically writing to file /var/lib/cloud/data/status.json (via temporary file /var/lib/cloud/data/tmpoljwr6gn) - w: [644] 518 bytes/chars
2025-12-07 15:40:25,516 - util.py[DEBUG]: Reading from /proc/uptime (quiet=False)
2025-12-07 15:40:25,517 - util.py[DEBUG]: Read 11 bytes from /proc/uptime
2025-12-07 15:40:25,517 - util.py[DEBUG]: cloud-init mode 'init' took 1.045 seconds (1.04)
2025-12-07 15:40:25,517 - handlers.py[DEBUG]: finish: init-local: SUCCESS: searching for local datasources
2025-12-07 15:40:40,409 - util.py[DEBUG]: Cloud-init v. 22.4.2 running 'init' at Sun, 07 Dec 2025 15:40:40 +0000. Up 19.23 seconds.
2025-12-07 15:40:40,409 - main.py[DEBUG]: No kernel command line url found.
2025-12-07 15:40:40,409 - main.py[DEBUG]: Closing stdin.
2025-12-07 15:40:40,410 - util.py[DEBUG]: Writing to /var/log/cloud-init.log - ab: [644] 0 bytes
2025-12-07 15:40:40,410 - util.py[DEBUG]: Changing the ownership of /var/log/cloud-init.log to 0:4
2025-12-07 15:40:40,410 - subp.py[DEBUG]: Running command ['ip', '--json', 'addr'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:40,414 - subp.py[DEBUG]: Running command ['ip', '-o', 'route', 'list'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:40,416 - subp.py[DEBUG]: Running command ['ip', '--oneline', '-6', 'route', 'list', 'table', 'all'] with allowed return codes [0, 1] (shell=False, capture=True)
2025-12-07 15:40:40,419 - handlers.py[DEBUG]: start: init-network/check-cache: attempting to read from cache [trust]
2025-12-07 15:40:40,419 - util.py[DEBUG]: Reading from /var/lib/cloud/instance/obj.pkl (quiet=False)
2025-12-07 15:40:40,419 - util.py[DEBUG]: Read 6516 bytes from /var/lib/cloud/instance/obj.pkl
2025-12-07 15:40:40,420 - util.py[DEBUG]: Reading from /run/cloud-init/.instance-id (quiet=False)
2025-12-07 15:40:40,421 - util.py[DEBUG]: Read 41 bytes from /run/cloud-init/.instance-id
2025-12-07 15:40:40,421 - stages.py[DEBUG]: restored from cache with run check: DataSourceNoCloud [seed=/dev/sr0][dsmode=net]
2025-12-07 15:40:40,421 - handlers.py[DEBUG]: finish: init-network/check-cache: SUCCESS: restored from cache with run check: DataSourceNoCloud [seed=/dev/sr0][dsmode=net]
2025-12-07 15:40:40,421 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg (quiet=False)
2025-12-07 15:40:40,421 - util.py[DEBUG]: Read 2796 bytes from /etc/cloud/cloud.cfg
2025-12-07 15:40:40,421 - util.py[DEBUG]: Attempting to load yaml from string of length 2796 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:40,426 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/05_logging.cfg (quiet=False)
2025-12-07 15:40:40,426 - util.py[DEBUG]: Read 2070 bytes from /etc/cloud/cloud.cfg.d/05_logging.cfg
2025-12-07 15:40:40,426 - util.py[DEBUG]: Attempting to load yaml from string of length 2070 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:40,428 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg (quiet=False)
2025-12-07 15:40:40,428 - util.py[DEBUG]: Read 309 bytes from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg
2025-12-07 15:40:40,428 - util.py[DEBUG]: Attempting to load yaml from string of length 309 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:40,429 - util.py[DEBUG]: Reading from /run/cloud-init/cloud.cfg (quiet=False)
2025-12-07 15:40:40,429 - util.py[DEBUG]: Read 35 bytes from /run/cloud-init/cloud.cfg
2025-12-07 15:40:40,430 - util.py[DEBUG]: Attempting to load yaml from string of length 35 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:40,430 - util.py[DEBUG]: Attempting to load yaml from string of length 0 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:40,430 - util.py[DEBUG]: loaded blob returned None, returning default.
2025-12-07 15:40:40,430 - util.py[DEBUG]: Attempting to remove /var/lib/cloud/instance
2025-12-07 15:40:40,430 - util.py[DEBUG]: Creating symbolic link from '/var/lib/cloud/instance' => '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184'
2025-12-07 15:40:40,431 - util.py[DEBUG]: Reading from /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/datasource (quiet=False)
2025-12-07 15:40:40,431 - util.py[DEBUG]: Read 65 bytes from /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/datasource
2025-12-07 15:40:40,431 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/datasource - wb: [644] 65 bytes
2025-12-07 15:40:40,431 - util.py[DEBUG]: Writing to /var/lib/cloud/data/previous-datasource - wb: [644] 65 bytes
2025-12-07 15:40:40,431 - util.py[DEBUG]: Reading from /var/lib/cloud/data/instance-id (quiet=False)
2025-12-07 15:40:40,431 - util.py[DEBUG]: Read 41 bytes from /var/lib/cloud/data/instance-id
2025-12-07 15:40:40,431 - stages.py[DEBUG]: previous iid found to be 3a7b79c34864e435b2e39df1a836248be4942184
2025-12-07 15:40:40,431 - util.py[DEBUG]: Writing to /var/lib/cloud/data/instance-id - wb: [644] 41 bytes
2025-12-07 15:40:40,432 - util.py[DEBUG]: Writing to /run/cloud-init/.instance-id - wb: [644] 41 bytes
2025-12-07 15:40:40,432 - util.py[DEBUG]: Writing to /var/lib/cloud/data/previous-instance-id - wb: [644] 41 bytes
2025-12-07 15:40:40,432 - util.py[DEBUG]: Writing to /var/lib/cloud/instance/obj.pkl - wb: [400] 6531 bytes
2025-12-07 15:40:40,432 - main.py[DEBUG]: [net] init will now be targeting instance id: 3a7b79c34864e435b2e39df1a836248be4942184. new=False
2025-12-07 15:40:40,433 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg (quiet=False)
2025-12-07 15:40:40,433 - util.py[DEBUG]: Read 2796 bytes from /etc/cloud/cloud.cfg
2025-12-07 15:40:40,433 - util.py[DEBUG]: Attempting to load yaml from string of length 2796 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:40,437 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/05_logging.cfg (quiet=False)
2025-12-07 15:40:40,437 - util.py[DEBUG]: Read 2070 bytes from /etc/cloud/cloud.cfg.d/05_logging.cfg
2025-12-07 15:40:40,437 - util.py[DEBUG]: Attempting to load yaml from string of length 2070 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:40,439 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg (quiet=False)
2025-12-07 15:40:40,439 - util.py[DEBUG]: Read 309 bytes from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg
2025-12-07 15:40:40,439 - util.py[DEBUG]: Attempting to load yaml from string of length 309 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:40,441 - util.py[DEBUG]: Reading from /run/cloud-init/cloud.cfg (quiet=False)
2025-12-07 15:40:40,441 - util.py[DEBUG]: Read 35 bytes from /run/cloud-init/cloud.cfg
2025-12-07 15:40:40,441 - util.py[DEBUG]: Attempting to load yaml from string of length 35 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:40,441 - util.py[DEBUG]: Attempting to load yaml from string of length 0 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:40,441 - util.py[DEBUG]: loaded blob returned None, returning default.
2025-12-07 15:40:40,442 - util.py[DEBUG]: Reading from /sys/class/net/lo/address (quiet=False)
2025-12-07 15:40:40,442 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/lo/address
2025-12-07 15:40:40,442 - util.py[DEBUG]: Reading from /sys/class/net/eth0/address (quiet=False)
2025-12-07 15:40:40,442 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/eth0/address
2025-12-07 15:40:40,443 - stages.py[DEBUG]: Allowed events: {<EventScope.NETWORK: 'network'>: {<EventType.BOOT_NEW_INSTANCE: 'boot-new-instance'>}}
2025-12-07 15:40:40,443 - stages.py[DEBUG]: Event Denied: scopes=['network'] EventType=boot-legacy
2025-12-07 15:40:40,443 - stages.py[DEBUG]: No network config applied. Neither a new instance nor datasource network update allowed
2025-12-07 15:40:40,443 - stages.py[DEBUG]: applying net config names for {'version': 1, 'config': [{'type': 'physical', 'name': 'eth0', 'mac_address': '00:50:56:5e:95:7b', 'subnets': [{'type': 'static', 'address': '109.199.123.73', 'netmask': '255.255.240.0', 'gateway': '109.199.112.1'}, {'type': 'static6', 'address': '2a02:c207:2293:6396:0000:0000:0000:0001/64', 'gateway': 'fe80::1'}]}, {'type': 'nameserver', 'address': ['213.136.95.10', '213.136.95.11', '2a02:c207::1:53']}]}
2025-12-07 15:40:40,443 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2025-12-07 15:40:40,443 - util.py[DEBUG]: Reading from /sys/class/net/eth0/device/device (quiet=False)
2025-12-07 15:40:40,443 - util.py[DEBUG]: Read 7 bytes from /sys/class/net/eth0/device/device
2025-12-07 15:40:40,443 - util.py[DEBUG]: Reading from /sys/class/net/lo/addr_assign_type (quiet=False)
2025-12-07 15:40:40,444 - util.py[DEBUG]: Read 2 bytes from /sys/class/net/lo/addr_assign_type
2025-12-07 15:40:40,444 - util.py[DEBUG]: Reading from /sys/class/net/lo/uevent (quiet=False)
2025-12-07 15:40:40,444 - util.py[DEBUG]: Read 23 bytes from /sys/class/net/lo/uevent
2025-12-07 15:40:40,444 - util.py[DEBUG]: Reading from /sys/class/net/lo/address (quiet=False)
2025-12-07 15:40:40,444 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/lo/address
2025-12-07 15:40:40,444 - __init__.py[DEBUG]: ovs-vsctl not in PATH; not detecting Open vSwitch interfaces
2025-12-07 15:40:40,444 - util.py[DEBUG]: Reading from /sys/class/net/lo/device/device (quiet=False)
2025-12-07 15:40:40,444 - util.py[DEBUG]: Reading from /sys/class/net/eth0/addr_assign_type (quiet=False)
2025-12-07 15:40:40,444 - util.py[DEBUG]: Read 2 bytes from /sys/class/net/eth0/addr_assign_type
2025-12-07 15:40:40,444 - util.py[DEBUG]: Reading from /sys/class/net/eth0/uevent (quiet=False)
2025-12-07 15:40:40,444 - util.py[DEBUG]: Read 25 bytes from /sys/class/net/eth0/uevent
2025-12-07 15:40:40,444 - util.py[DEBUG]: Reading from /sys/class/net/eth0/address (quiet=False)
2025-12-07 15:40:40,444 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/eth0/address
2025-12-07 15:40:40,444 - util.py[DEBUG]: Reading from /sys/class/net/eth0/device/device (quiet=False)
2025-12-07 15:40:40,444 - util.py[DEBUG]: Read 7 bytes from /sys/class/net/eth0/device/device
2025-12-07 15:40:40,444 - util.py[DEBUG]: Reading from /sys/class/net/lo/operstate (quiet=False)
2025-12-07 15:40:40,444 - util.py[DEBUG]: Read 8 bytes from /sys/class/net/lo/operstate
2025-12-07 15:40:40,444 - util.py[DEBUG]: Reading from /sys/class/net/eth0/operstate (quiet=False)
2025-12-07 15:40:40,444 - util.py[DEBUG]: Read 3 bytes from /sys/class/net/eth0/operstate
2025-12-07 15:40:40,444 - subp.py[DEBUG]: Running command ['ip', '-6', 'addr', 'show', 'permanent', 'scope', 'global'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:40,447 - subp.py[DEBUG]: Running command ['ip', '-4', 'addr', 'show'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:40,450 - __init__.py[DEBUG]: Detected interfaces {'lo': {'downable': False, 'device_id': None, 'driver': None, 'mac': '00:00:00:00:00:00', 'name': 'lo', 'up': True}, 'eth0': {'downable': False, 'device_id': '0x0001', 'driver': 'virtio_net', 'mac': '00:50:56:5e:95:7b', 'name': 'eth0', 'up': True}}
2025-12-07 15:40:40,450 - __init__.py[DEBUG]: no work necessary for renaming of [['00:50:56:5e:95:7b', 'eth0', 'virtio_net', '0x0001']]
2025-12-07 15:40:40,450 - handlers.py[DEBUG]: start: init-network/setup-datasource: setting up datasource
2025-12-07 15:40:40,450 - handlers.py[DEBUG]: finish: init-network/setup-datasource: SUCCESS: setting up datasource
2025-12-07 15:40:40,450 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/user-data.txt - wb: [600] 1714 bytes
2025-12-07 15:40:40,451 - util.py[DEBUG]: Attempting to load yaml from string of length 1714 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:40,456 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/user-data.txt.i - wb: [600] 2019 bytes
2025-12-07 15:40:40,456 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/vendor-data.txt - wb: [600] 0 bytes
2025-12-07 15:40:40,457 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/vendor-data.txt.i - wb: [600] 308 bytes
2025-12-07 15:40:40,457 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/vendor-data2.txt - wb: [600] 0 bytes
2025-12-07 15:40:40,457 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/vendor-data2.txt.i - wb: [600] 308 bytes
2025-12-07 15:40:40,458 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/consume_data - wb: [644] 24 bytes
2025-12-07 15:40:40,458 - helpers.py[DEBUG]: Running consume_data using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/consume_data'>)
2025-12-07 15:40:40,458 - handlers.py[DEBUG]: start: init-network/consume-user-data: reading and applying user-data
2025-12-07 15:40:40,459 - stages.py[DEBUG]: Added default handler for {'text/cloud-config', 'text/cloud-config-jsonp'} from CloudConfigPartHandler: [['text/cloud-config', 'text/cloud-config-jsonp']]
2025-12-07 15:40:40,459 - stages.py[DEBUG]: Added default handler for {'text/x-shellscript'} from ShellScriptPartHandler: [['text/x-shellscript']]
2025-12-07 15:40:40,459 - stages.py[DEBUG]: Added default handler for {'text/x-shellscript-per-boot'} from ShellScriptByFreqPartHandler: [['text/x-shellscript-per-boot']]
2025-12-07 15:40:40,459 - stages.py[DEBUG]: Added default handler for {'text/x-shellscript-per-instance'} from ShellScriptByFreqPartHandler: [['text/x-shellscript-per-instance']]
2025-12-07 15:40:40,459 - stages.py[DEBUG]: Added default handler for {'text/x-shellscript-per-once'} from ShellScriptByFreqPartHandler: [['text/x-shellscript-per-once']]
2025-12-07 15:40:40,459 - stages.py[DEBUG]: Added default handler for {'text/cloud-boothook'} from BootHookPartHandler: [['text/cloud-boothook']]
2025-12-07 15:40:40,459 - stages.py[DEBUG]: Added default handler for {'text/jinja2'} from JinjaTemplatePartHandler: [['text/jinja2']]
2025-12-07 15:40:40,459 - __init__.py[DEBUG]: Calling handler CloudConfigPartHandler: [['text/cloud-config', 'text/cloud-config-jsonp']] (__begin__, None, 3) with frequency once-per-instance
2025-12-07 15:40:40,459 - __init__.py[DEBUG]: Calling handler ShellScriptPartHandler: [['text/x-shellscript']] (__begin__, None, 2) with frequency once-per-instance
2025-12-07 15:40:40,459 - __init__.py[DEBUG]: Calling handler ShellScriptByFreqPartHandler: [['text/x-shellscript-per-boot']] (__begin__, None, 2) with frequency once-per-instance
2025-12-07 15:40:40,459 - __init__.py[DEBUG]: Calling handler ShellScriptByFreqPartHandler: [['text/x-shellscript-per-instance']] (__begin__, None, 2) with frequency once-per-instance
2025-12-07 15:40:40,459 - __init__.py[DEBUG]: Calling handler ShellScriptByFreqPartHandler: [['text/x-shellscript-per-once']] (__begin__, None, 2) with frequency once-per-instance
2025-12-07 15:40:40,459 - __init__.py[DEBUG]: Calling handler BootHookPartHandler: [['text/cloud-boothook']] (__begin__, None, 2) with frequency once-per-instance
2025-12-07 15:40:40,459 - __init__.py[DEBUG]: Calling handler JinjaTemplatePartHandler: [['text/jinja2']] (__begin__, None, 3) with frequency once-per-instance
2025-12-07 15:40:40,459 - __init__.py[DEBUG]: {'MIME-Version': '1.0', 'Content-Type': 'text/cloud-config', 'Content-Disposition': 'attachment; filename="part-001"'}
2025-12-07 15:40:40,459 - __init__.py[DEBUG]: Calling handler CloudConfigPartHandler: [['text/cloud-config', 'text/cloud-config-jsonp']] (text/cloud-config, part-001, 3) with frequency once-per-instance
2025-12-07 15:40:40,459 - util.py[DEBUG]: Attempting to load yaml from string of length 1714 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:40,463 - cloud_config.py[DEBUG]: Merging by applying [('dict', ['replace']), ('list', []), ('str', [])]
2025-12-07 15:40:40,463 - __init__.py[DEBUG]: Calling handler CloudConfigPartHandler: [['text/cloud-config', 'text/cloud-config-jsonp']] (__end__, None, 3) with frequency once-per-instance
2025-12-07 15:40:40,465 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/cloud-config.txt - wb: [600] 1742 bytes
2025-12-07 15:40:40,465 - __init__.py[DEBUG]: Calling handler ShellScriptPartHandler: [['text/x-shellscript']] (__end__, None, 2) with frequency once-per-instance
2025-12-07 15:40:40,466 - __init__.py[DEBUG]: Calling handler ShellScriptByFreqPartHandler: [['text/x-shellscript-per-boot']] (__end__, None, 2) with frequency once-per-instance
2025-12-07 15:40:40,466 - __init__.py[DEBUG]: Calling handler ShellScriptByFreqPartHandler: [['text/x-shellscript-per-instance']] (__end__, None, 2) with frequency once-per-instance
2025-12-07 15:40:40,466 - __init__.py[DEBUG]: Calling handler ShellScriptByFreqPartHandler: [['text/x-shellscript-per-once']] (__end__, None, 2) with frequency once-per-instance
2025-12-07 15:40:40,466 - __init__.py[DEBUG]: Calling handler BootHookPartHandler: [['text/cloud-boothook']] (__end__, None, 2) with frequency once-per-instance
2025-12-07 15:40:40,466 - __init__.py[DEBUG]: Calling handler JinjaTemplatePartHandler: [['text/jinja2']] (__end__, None, 3) with frequency once-per-instance
2025-12-07 15:40:40,466 - handlers.py[DEBUG]: finish: init-network/consume-user-data: SUCCESS: reading and applying user-data
2025-12-07 15:40:40,466 - handlers.py[DEBUG]: start: init-network/consume-vendor-data: reading and applying vendor-data
2025-12-07 15:40:40,466 - stages.py[DEBUG]: no vendordata from datasource
2025-12-07 15:40:40,466 - handlers.py[DEBUG]: finish: init-network/consume-vendor-data: SUCCESS: reading and applying vendor-data
2025-12-07 15:40:40,466 - handlers.py[DEBUG]: start: init-network/consume-vendor-data2: reading and applying vendor-data2
2025-12-07 15:40:40,466 - stages.py[DEBUG]: no vendordata2 from datasource
2025-12-07 15:40:40,466 - handlers.py[DEBUG]: finish: init-network/consume-vendor-data2: SUCCESS: reading and applying vendor-data2
2025-12-07 15:40:40,466 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg (quiet=False)
2025-12-07 15:40:40,466 - util.py[DEBUG]: Read 2796 bytes from /etc/cloud/cloud.cfg
2025-12-07 15:40:40,466 - util.py[DEBUG]: Attempting to load yaml from string of length 2796 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:40,471 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/05_logging.cfg (quiet=False)
2025-12-07 15:40:40,471 - util.py[DEBUG]: Read 2070 bytes from /etc/cloud/cloud.cfg.d/05_logging.cfg
2025-12-07 15:40:40,471 - util.py[DEBUG]: Attempting to load yaml from string of length 2070 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:40,474 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg (quiet=False)
2025-12-07 15:40:40,475 - util.py[DEBUG]: Read 309 bytes from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg
2025-12-07 15:40:40,475 - util.py[DEBUG]: Attempting to load yaml from string of length 309 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:40,476 - util.py[DEBUG]: Reading from /run/cloud-init/cloud.cfg (quiet=False)
2025-12-07 15:40:40,476 - util.py[DEBUG]: Read 35 bytes from /run/cloud-init/cloud.cfg
2025-12-07 15:40:40,476 - util.py[DEBUG]: Attempting to load yaml from string of length 35 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:40,476 - util.py[DEBUG]: Attempting to load yaml from string of length 0 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:40,476 - util.py[DEBUG]: loaded blob returned None, returning default.
2025-12-07 15:40:40,477 - util.py[DEBUG]: Reading from /var/lib/cloud/instance/cloud-config.txt (quiet=False)
2025-12-07 15:40:40,477 - util.py[DEBUG]: Read 1742 bytes from /var/lib/cloud/instance/cloud-config.txt
2025-12-07 15:40:40,477 - util.py[DEBUG]: Attempting to load yaml from string of length 1742 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:40,480 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:40,480 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:40,488 - util.py[DEBUG]: Reading from /var/lib/cloud/instance/cloud-config.txt (quiet=False)
2025-12-07 15:40:40,488 - util.py[DEBUG]: Read 1742 bytes from /var/lib/cloud/instance/cloud-config.txt
2025-12-07 15:40:40,488 - util.py[DEBUG]: Attempting to load yaml from string of length 1742 with allowed root types (<class 'dict'>,)
2025-12-07 15:40:40,493 - handlers.py[DEBUG]: start: init-network/activate-datasource: activating datasource
2025-12-07 15:40:40,494 - util.py[DEBUG]: Writing to /var/lib/cloud/instance/obj.pkl - wb: [400] 10395 bytes
2025-12-07 15:40:40,494 - handlers.py[DEBUG]: finish: init-network/activate-datasource: SUCCESS: activating datasource
2025-12-07 15:40:40,495 - main.py[DEBUG]: no di_report found in config.
2025-12-07 15:40:40,496 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:40,496 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:40,499 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:40,499 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:40,501 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:40,502 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:40,504 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:40,504 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:40,506 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:40,506 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:40,508 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:40,508 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:40,510 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:40,510 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:40,512 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:40,512 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:40,514 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:40,514 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:40,516 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:40,516 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:40,517 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:40,518 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:40,519 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:40,520 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:40,522 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:40,522 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:40,525 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:40,525 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:40,527 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2025-12-07 15:40:40,528 - modules.py[INFO]: Skipping modules 'disk_setup,ca-certs,rsyslog' because no applicable config is provided.
2025-12-07 15:40:40,529 - modules.py[DEBUG]: Running module migrator (<module 'cloudinit.config.cc_migrator' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_migrator.py'>) with frequency always
2025-12-07 15:40:40,529 - handlers.py[DEBUG]: start: init-network/config-migrator: running config-migrator with frequency always
2025-12-07 15:40:40,529 - helpers.py[DEBUG]: Running config-migrator using lock (<cloudinit.helpers.DummyLock object at 0x7faee79943d0>)
2025-12-07 15:40:40,529 - cc_migrator.py[DEBUG]: Migrated 0 semaphore files to there canonicalized names
2025-12-07 15:40:40,529 - handlers.py[DEBUG]: finish: init-network/config-migrator: SUCCESS: config-migrator ran successfully
2025-12-07 15:40:40,529 - modules.py[DEBUG]: Running module seed_random (<module 'cloudinit.config.cc_seed_random' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_seed_random.py'>) with frequency once-per-instance
2025-12-07 15:40:40,529 - handlers.py[DEBUG]: start: init-network/config-seed_random: running config-seed_random with frequency once-per-instance
2025-12-07 15:40:40,530 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_seed_random - wb: [644] 24 bytes
2025-12-07 15:40:40,530 - helpers.py[DEBUG]: Running config-seed_random using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_seed_random'>)
2025-12-07 15:40:40,530 - cc_seed_random.py[DEBUG]: no command provided
2025-12-07 15:40:40,530 - handlers.py[DEBUG]: finish: init-network/config-seed_random: SUCCESS: config-seed_random ran successfully
2025-12-07 15:40:40,530 - modules.py[DEBUG]: Running module bootcmd (<module 'cloudinit.config.cc_bootcmd' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_bootcmd.py'>) with frequency always
2025-12-07 15:40:40,530 - handlers.py[DEBUG]: start: init-network/config-bootcmd: running config-bootcmd with frequency always
2025-12-07 15:40:40,531 - helpers.py[DEBUG]: Running config-bootcmd using lock (<cloudinit.helpers.DummyLock object at 0x7faee79979d0>)
2025-12-07 15:40:40,531 - util.py[DEBUG]: Shellified 3 commands.
2025-12-07 15:40:40,531 - subp.py[DEBUG]: Running command ['/bin/sh', '/run/cloud-init/tmp/tmpa6s9q4db.sh'] with allowed return codes [0] (shell=False, capture=False)
2025-12-07 15:40:40,559 - util.py[WARNING]: Failed to run bootcmd module bootcmd
2025-12-07 15:40:40,559 - util.py[DEBUG]: Failed to run bootcmd module bootcmd
Traceback (most recent call last):
  File "/usr/lib/python3/dist-packages/cloudinit/config/cc_bootcmd.py", line 91, in handle
    subp.subp(cmd, env=env, capture=False)
  File "/usr/lib/python3/dist-packages/cloudinit/subp.py", line 335, in subp
    raise ProcessExecutionError(
cloudinit.subp.ProcessExecutionError: Unexpected error while running command.
Command: ['/bin/sh', '/run/cloud-init/tmp/tmpa6s9q4db.sh']
Exit code: 1
Reason: -
Stdout: -
Stderr: -
2025-12-07 15:40:40,561 - handlers.py[DEBUG]: finish: init-network/config-bootcmd: FAIL: running config-bootcmd with frequency always
2025-12-07 15:40:40,561 - util.py[WARNING]: Running module bootcmd (<module 'cloudinit.config.cc_bootcmd' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_bootcmd.py'>) failed
2025-12-07 15:40:40,561 - util.py[DEBUG]: Running module bootcmd (<module 'cloudinit.config.cc_bootcmd' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_bootcmd.py'>) failed
Traceback (most recent call last):
  File "/usr/lib/python3/dist-packages/cloudinit/config/modules.py", line 246, in _run_modules
    ran, _r = cc.run(
              ^^^^^^^
  File "/usr/lib/python3/dist-packages/cloudinit/cloud.py", line 67, in run
    return self._runners.run(name, functor, args, freq, clear_on_fail)
           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/lib/python3/dist-packages/cloudinit/helpers.py", line 185, in run
    results = functor(*args)
              ^^^^^^^^^^^^^^
  File "/usr/lib/python3/dist-packages/cloudinit/config/cc_bootcmd.py", line 91, in handle
    subp.subp(cmd, env=env, capture=False)
  File "/usr/lib/python3/dist-packages/cloudinit/subp.py", line 335, in subp
    raise ProcessExecutionError(
cloudinit.subp.ProcessExecutionError: Unexpected error while running command.
Command: ['/bin/sh', '/run/cloud-init/tmp/tmpa6s9q4db.sh']
Exit code: 1
Reason: -
Stdout: -
Stderr: -
2025-12-07 15:40:40,565 - modules.py[DEBUG]: Running module write-files (<module 'cloudinit.config.cc_write_files' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_write_files.py'>) with frequency once-per-instance
2025-12-07 15:40:40,566 - handlers.py[DEBUG]: start: init-network/config-write-files: running config-write-files with frequency once-per-instance
2025-12-07 15:40:40,566 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_write_files - wb: [644] 24 bytes
2025-12-07 15:40:40,566 - helpers.py[DEBUG]: Running config-write-files using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_write_files'>)
2025-12-07 15:40:40,567 - util.py[DEBUG]: Writing to /etc/cron.hourly/free - wb: [755] 44 bytes
2025-12-07 15:40:40,567 - util.py[DEBUG]: Changing the ownership of /etc/cron.hourly/free to 0:0
2025-12-07 15:40:40,567 - util.py[DEBUG]: Writing to /etc/cron.hourly/fstrim - wb: [755] 19 bytes
2025-12-07 15:40:40,567 - util.py[DEBUG]: Changing the ownership of /etc/cron.hourly/fstrim to 0:0
2025-12-07 15:40:40,567 - util.py[DEBUG]: Writing to /etc/sysctl.d/10-panic.conf - wb: [644] 18 bytes
2025-12-07 15:40:40,567 - util.py[DEBUG]: Changing the ownership of /etc/sysctl.d/10-panic.conf to 0:0
2025-12-07 15:40:40,568 - util.py[DEBUG]: Writing to /etc/cron.d/staticroute - wb: [644] 263 bytes
2025-12-07 15:40:40,568 - util.py[DEBUG]: Changing the ownership of /etc/cron.d/staticroute to 0:0
2025-12-07 15:40:40,568 - util.py[DEBUG]: Writing to /etc/cloud/cloud.cfg.d/99-ssh.cfg - wb: [644] 48 bytes
2025-12-07 15:40:40,569 - util.py[DEBUG]: Changing the ownership of /etc/cloud/cloud.cfg.d/99-ssh.cfg to 0:0
2025-12-07 15:40:40,569 - util.py[DEBUG]: Writing to /etc/motd - wb: [644] 302 bytes
2025-12-07 15:40:40,569 - util.py[DEBUG]: Changing the ownership of /etc/motd to 0:0
2025-12-07 15:40:40,569 - handlers.py[DEBUG]: finish: init-network/config-write-files: SUCCESS: config-write-files ran successfully
2025-12-07 15:40:40,569 - modules.py[DEBUG]: Running module growpart (<module 'cloudinit.config.cc_growpart' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_growpart.py'>) with frequency always
2025-12-07 15:40:40,569 - handlers.py[DEBUG]: start: init-network/config-growpart: running config-growpart with frequency always
2025-12-07 15:40:40,570 - helpers.py[DEBUG]: Running config-growpart using lock (<cloudinit.helpers.DummyLock object at 0x7faee79b6490>)
2025-12-07 15:40:40,570 - cc_growpart.py[DEBUG]: No 'growpart' entry in cfg.  Using default: {'mode': 'auto', 'devices': ['/'], 'ignore_growroot_disabled': False}
2025-12-07 15:40:40,570 - subp.py[DEBUG]: Running command ['growpart', '--help'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:40,577 - util.py[DEBUG]: Reading from /proc/497/mountinfo (quiet=False)
2025-12-07 15:40:40,577 - util.py[DEBUG]: Read 2609 bytes from /proc/497/mountinfo
2025-12-07 15:40:40,578 - util.py[DEBUG]: Reading from /sys/class/block/sda1/partition (quiet=False)
2025-12-07 15:40:40,578 - util.py[DEBUG]: Read 2 bytes from /sys/class/block/sda1/partition
2025-12-07 15:40:40,578 - util.py[DEBUG]: Reading from /sys/devices/pci0000:00/0000:00:05.0/virtio1/host0/target0:0:0/0:0:0:0/block/sda/dev (quiet=False)
2025-12-07 15:40:40,578 - util.py[DEBUG]: Read 4 bytes from /sys/devices/pci0000:00/0000:00:05.0/virtio1/host0/target0:0:0/0:0:0:0/block/sda/dev
2025-12-07 15:40:40,578 - util.py[DEBUG]: Reading from /proc/497/mountinfo (quiet=False)
2025-12-07 15:40:40,579 - util.py[DEBUG]: Read 2609 bytes from /proc/497/mountinfo
2025-12-07 15:40:40,579 - util.py[DEBUG]: Reading from /proc/497/mountinfo (quiet=False)
2025-12-07 15:40:40,579 - util.py[DEBUG]: Read 2609 bytes from /proc/497/mountinfo
2025-12-07 15:40:40,579 - subp.py[DEBUG]: Running command ['growpart', '--dry-run', '/dev/sda', '1'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:40,637 - util.py[DEBUG]: resize_devices took 0.060 seconds
2025-12-07 15:40:40,637 - cc_growpart.py[DEBUG]: '/' NOCHANGE: no change necessary (/dev/sda, 1)
2025-12-07 15:40:40,638 - handlers.py[DEBUG]: finish: init-network/config-growpart: SUCCESS: config-growpart ran successfully
2025-12-07 15:40:40,638 - modules.py[DEBUG]: Running module resizefs (<module 'cloudinit.config.cc_resizefs' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_resizefs.py'>) with frequency always
2025-12-07 15:40:40,638 - handlers.py[DEBUG]: start: init-network/config-resizefs: running config-resizefs with frequency always
2025-12-07 15:40:40,638 - helpers.py[DEBUG]: Running config-resizefs using lock (<cloudinit.helpers.DummyLock object at 0x7faee79b6810>)
2025-12-07 15:40:40,638 - util.py[DEBUG]: Reading from /proc/497/mountinfo (quiet=False)
2025-12-07 15:40:40,639 - util.py[DEBUG]: Read 2609 bytes from /proc/497/mountinfo
2025-12-07 15:40:40,639 - cc_resizefs.py[DEBUG]: resize_info: dev=/dev/sda1 mnt_point=/ path=/
2025-12-07 15:40:40,639 - cc_resizefs.py[DEBUG]: Resizing / (ext4) using resize2fs /dev/sda1
2025-12-07 15:40:40,639 - subp.py[DEBUG]: Running command ('resize2fs', '/dev/sda1') with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:40,644 - util.py[DEBUG]: Resizing took 0.005 seconds
2025-12-07 15:40:40,644 - cc_resizefs.py[DEBUG]: Resized root filesystem (type=ext4, val=True)
2025-12-07 15:40:40,644 - handlers.py[DEBUG]: finish: init-network/config-resizefs: SUCCESS: config-resizefs ran successfully
2025-12-07 15:40:40,644 - modules.py[DEBUG]: Running module mounts (<module 'cloudinit.config.cc_mounts' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_mounts.py'>) with frequency once-per-instance
2025-12-07 15:40:40,644 - handlers.py[DEBUG]: start: init-network/config-mounts: running config-mounts with frequency once-per-instance
2025-12-07 15:40:40,645 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_mounts - wb: [644] 23 bytes
2025-12-07 15:40:40,645 - helpers.py[DEBUG]: Running config-mounts using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_mounts'>)
2025-12-07 15:40:40,645 - cc_mounts.py[DEBUG]: mounts configuration is []
2025-12-07 15:40:40,645 - util.py[DEBUG]: Reading from /etc/fstab (quiet=False)
2025-12-07 15:40:40,645 - util.py[DEBUG]: Read 177 bytes from /etc/fstab
2025-12-07 15:40:40,645 - cc_mounts.py[DEBUG]: Attempting to determine the real name of ephemeral0
2025-12-07 15:40:40,645 - cc_mounts.py[DEBUG]: changed default device ephemeral0 => None
2025-12-07 15:40:40,645 - cc_mounts.py[DEBUG]: Ignoring nonexistent default named mount ephemeral0
2025-12-07 15:40:40,645 - cc_mounts.py[DEBUG]: Attempting to determine the real name of swap
2025-12-07 15:40:40,646 - cc_mounts.py[DEBUG]: changed default device swap => None
2025-12-07 15:40:40,646 - cc_mounts.py[DEBUG]: Ignoring nonexistent default named mount swap
2025-12-07 15:40:40,646 - cc_mounts.py[DEBUG]: no need to setup swap
2025-12-07 15:40:40,646 - cc_mounts.py[DEBUG]: No modifications to fstab needed
2025-12-07 15:40:40,646 - handlers.py[DEBUG]: finish: init-network/config-mounts: SUCCESS: config-mounts ran successfully
2025-12-07 15:40:40,646 - modules.py[DEBUG]: Running module set_hostname (<module 'cloudinit.config.cc_set_hostname' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_set_hostname.py'>) with frequency once-per-instance
2025-12-07 15:40:40,646 - handlers.py[DEBUG]: start: init-network/config-set_hostname: running config-set_hostname with frequency once-per-instance
2025-12-07 15:40:40,646 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_set_hostname - wb: [644] 24 bytes
2025-12-07 15:40:40,646 - helpers.py[DEBUG]: Running config-set_hostname using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_set_hostname'>)
2025-12-07 15:40:40,646 - cc_set_hostname.py[DEBUG]: Setting the hostname to vmi2936396.contaboserver.net (vmi2936396)
2025-12-07 15:40:40,646 - util.py[DEBUG]: Reading from /etc/hostname (quiet=False)
2025-12-07 15:40:40,647 - util.py[DEBUG]: Read 0 bytes from /etc/hostname
2025-12-07 15:40:40,647 - util.py[DEBUG]: Writing to /etc/hostname - wb: [644] 11 bytes
2025-12-07 15:40:40,647 - __init__.py[DEBUG]: Non-persistently setting the system hostname to vmi2936396
2025-12-07 15:40:40,647 - subp.py[DEBUG]: Running command ['hostname', 'vmi2936396'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:40,649 - atomic_helper.py[DEBUG]: Atomically writing to file /var/lib/cloud/data/set-hostname (via temporary file /var/lib/cloud/data/tmpqcoe114t) - w: [644] 71 bytes/chars
2025-12-07 15:40:40,649 - handlers.py[DEBUG]: finish: init-network/config-set_hostname: SUCCESS: config-set_hostname ran successfully
2025-12-07 15:40:40,649 - modules.py[DEBUG]: Running module update_hostname (<module 'cloudinit.config.cc_update_hostname' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_update_hostname.py'>) with frequency always
2025-12-07 15:40:40,650 - handlers.py[DEBUG]: start: init-network/config-update_hostname: running config-update_hostname with frequency always
2025-12-07 15:40:40,650 - helpers.py[DEBUG]: Running config-update_hostname using lock (<cloudinit.helpers.DummyLock object at 0x7faee79b56d0>)
2025-12-07 15:40:40,650 - cc_update_hostname.py[DEBUG]: Updating hostname to vmi2936396.contaboserver.net (vmi2936396)
2025-12-07 15:40:40,650 - util.py[DEBUG]: Reading from /etc/hostname (quiet=False)
2025-12-07 15:40:40,650 - util.py[DEBUG]: Read 11 bytes from /etc/hostname
2025-12-07 15:40:40,650 - __init__.py[DEBUG]: Attempting to update hostname to vmi2936396 in 1 files
2025-12-07 15:40:40,650 - util.py[DEBUG]: Reading from /var/lib/cloud/data/previous-hostname (quiet=False)
2025-12-07 15:40:40,650 - util.py[DEBUG]: Writing to /var/lib/cloud/data/previous-hostname - wb: [644] 11 bytes
2025-12-07 15:40:40,650 - handlers.py[DEBUG]: finish: init-network/config-update_hostname: SUCCESS: config-update_hostname ran successfully
2025-12-07 15:40:40,650 - modules.py[DEBUG]: Running module update_etc_hosts (<module 'cloudinit.config.cc_update_etc_hosts' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_update_etc_hosts.py'>) with frequency always
2025-12-07 15:40:40,651 - handlers.py[DEBUG]: start: init-network/config-update_etc_hosts: running config-update_etc_hosts with frequency always
2025-12-07 15:40:40,651 - helpers.py[DEBUG]: Running config-update_etc_hosts using lock (<cloudinit.helpers.DummyLock object at 0x7faee79b7650>)
2025-12-07 15:40:40,651 - util.py[DEBUG]: Reading from /etc/cloud/templates/hosts.debian.tmpl (quiet=False)
2025-12-07 15:40:40,651 - util.py[DEBUG]: Read 845 bytes from /etc/cloud/templates/hosts.debian.tmpl
2025-12-07 15:40:40,651 - templater.py[DEBUG]: Rendering content of '/etc/cloud/templates/hosts.debian.tmpl' using renderer jinja
2025-12-07 15:40:40,656 - util.py[DEBUG]: Writing to /etc/hosts - wb: [644] 565 bytes
2025-12-07 15:40:40,658 - handlers.py[DEBUG]: finish: init-network/config-update_etc_hosts: SUCCESS: config-update_etc_hosts ran successfully
2025-12-07 15:40:40,658 - modules.py[DEBUG]: Running module users-groups (<module 'cloudinit.config.cc_users_groups' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_users_groups.py'>) with frequency once-per-instance
2025-12-07 15:40:40,658 - handlers.py[DEBUG]: start: init-network/config-users-groups: running config-users-groups with frequency once-per-instance
2025-12-07 15:40:40,658 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_users_groups - wb: [644] 22 bytes
2025-12-07 15:40:40,658 - helpers.py[DEBUG]: Running config-users-groups using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_users_groups'>)
2025-12-07 15:40:40,658 - ug_util.py[WARNING]: DEPRECATED: 'user' of type string is deprecated and will be removed in a future release. Use 'users' list instead.
2025-12-07 15:40:40,659 - __init__.py[INFO]: User root already exists, skipping.
2025-12-07 15:40:40,659 - subp.py[DEBUG]: Running command ['passwd', '-l', 'root'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:40,675 - util.py[DEBUG]: Reading from /etc/sudoers (quiet=False)
2025-12-07 15:40:40,675 - util.py[DEBUG]: Read 1714 bytes from /etc/sudoers
2025-12-07 15:40:40,676 - util.py[DEBUG]: Writing to /etc/sudoers.d/90-cloud-init-users - wb: [440] 120 bytes
2025-12-07 15:40:40,677 - handlers.py[DEBUG]: finish: init-network/config-users-groups: SUCCESS: config-users-groups ran successfully
2025-12-07 15:40:40,677 - modules.py[DEBUG]: Running module ssh (<module 'cloudinit.config.cc_ssh' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_ssh.py'>) with frequency once-per-instance
2025-12-07 15:40:40,677 - handlers.py[DEBUG]: start: init-network/config-ssh: running config-ssh with frequency once-per-instance
2025-12-07 15:40:40,678 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_ssh - wb: [644] 24 bytes
2025-12-07 15:40:40,678 - helpers.py[DEBUG]: Running config-ssh using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_ssh'>)
2025-12-07 15:40:40,679 - subp.py[DEBUG]: Running command ['ssh-keygen', '-t', 'rsa', '-N', '', '-f', '/etc/ssh/ssh_host_rsa_key'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:41,451 - util.py[DEBUG]: Group ssh_keys is not a valid group name
2025-12-07 15:40:41,452 - subp.py[DEBUG]: Running command ['ssh-keygen', '-t', 'dsa', '-N', '', '-f', '/etc/ssh/ssh_host_dsa_key'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:41,526 - util.py[DEBUG]: Group ssh_keys is not a valid group name
2025-12-07 15:40:41,526 - subp.py[DEBUG]: Running command ['ssh-keygen', '-t', 'ecdsa', '-N', '', '-f', '/etc/ssh/ssh_host_ecdsa_key'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:41,535 - util.py[DEBUG]: Group ssh_keys is not a valid group name
2025-12-07 15:40:41,535 - subp.py[DEBUG]: Running command ['ssh-keygen', '-t', 'ed25519', '-N', '', '-f', '/etc/ssh/ssh_host_ed25519_key'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:41,543 - util.py[DEBUG]: Group ssh_keys is not a valid group name
2025-12-07 15:40:41,543 - util.py[DEBUG]: Reading from /etc/ssh/ssh_host_ed25519_key.pub (quiet=False)
2025-12-07 15:40:41,544 - util.py[DEBUG]: Read 97 bytes from /etc/ssh/ssh_host_ed25519_key.pub
2025-12-07 15:40:41,544 - util.py[DEBUG]: Reading from /etc/ssh/ssh_host_rsa_key.pub (quiet=False)
2025-12-07 15:40:41,544 - util.py[DEBUG]: Read 569 bytes from /etc/ssh/ssh_host_rsa_key.pub
2025-12-07 15:40:41,544 - util.py[DEBUG]: Reading from /etc/ssh/ssh_host_ecdsa_key.pub (quiet=False)
2025-12-07 15:40:41,544 - util.py[DEBUG]: Read 177 bytes from /etc/ssh/ssh_host_ecdsa_key.pub
2025-12-07 15:40:41,544 - ug_util.py[WARNING]: DEPRECATED: 'user' of type string is deprecated and will be removed in a future release. Use 'users' list instead.
2025-12-07 15:40:41,545 - util.py[DEBUG]: Reading from /etc/ssh/sshd_config (quiet=False)
2025-12-07 15:40:41,545 - util.py[DEBUG]: Read 3230 bytes from /etc/ssh/sshd_config
2025-12-07 15:40:41,546 - util.py[DEBUG]: Writing to /root/.ssh/authorized_keys - wb: [600] 0 bytes
2025-12-07 15:40:41,547 - util.py[DEBUG]: Changing the ownership of /root/.ssh/authorized_keys to 0:0
2025-12-07 15:40:41,547 - util.py[DEBUG]: Reading from /root/.ssh/authorized_keys (quiet=False)
2025-12-07 15:40:41,547 - util.py[DEBUG]: Read 0 bytes from /root/.ssh/authorized_keys
2025-12-07 15:40:41,547 - util.py[DEBUG]: Writing to /root/.ssh/authorized_keys - wb: [600] 0 bytes
2025-12-07 15:40:41,548 - util.py[DEBUG]: Reading from /etc/ssh/sshd_config (quiet=False)
2025-12-07 15:40:41,548 - util.py[DEBUG]: Read 3230 bytes from /etc/ssh/sshd_config
2025-12-07 15:40:41,548 - util.py[DEBUG]: Reading from /root/.ssh/authorized_keys (quiet=False)
2025-12-07 15:40:41,548 - util.py[DEBUG]: Read 0 bytes from /root/.ssh/authorized_keys
2025-12-07 15:40:41,549 - util.py[DEBUG]: Writing to /root/.ssh/authorized_keys - wb: [600] 0 bytes
2025-12-07 15:40:41,549 - handlers.py[DEBUG]: finish: init-network/config-ssh: SUCCESS: config-ssh ran successfully
2025-12-07 15:40:41,549 - main.py[DEBUG]: Ran 12 modules with 1 failures
2025-12-07 15:40:41,550 - atomic_helper.py[DEBUG]: Atomically writing to file /var/lib/cloud/data/status.json (via temporary file /var/lib/cloud/data/tmp6q3q52xi) - w: [644] 748 bytes/chars
2025-12-07 15:40:41,550 - util.py[DEBUG]: Reading from /proc/uptime (quiet=False)
2025-12-07 15:40:41,550 - util.py[DEBUG]: Read 13 bytes from /proc/uptime
2025-12-07 15:40:41,550 - util.py[DEBUG]: cloud-init mode 'init' took 1.173 seconds (1.17)
2025-12-07 15:40:41,551 - handlers.py[DEBUG]: finish: init-network: FAIL: searching for network datasources
2025-12-07 15:40:42,041 - util.py[DEBUG]: Cloud-init v. 22.4.2 running 'modules:config' at Sun, 07 Dec 2025 15:40:42 +0000. Up 20.84 seconds.
2025-12-07 15:40:42,043 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,043 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,045 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,045 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,047 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,047 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,049 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,049 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,052 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,052 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,056 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,056 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,058 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,058 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,061 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,061 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,064 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,064 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,066 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,066 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,067 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,068 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,069 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,069 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,071 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,071 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,072 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2025-12-07 15:40:42,073 - modules.py[INFO]: Skipping modules 'snap,keyboard,apt-pipelining,ntp,disable-ec2-metadata,runcmd' because no applicable config is provided.
2025-12-07 15:40:42,074 - modules.py[DEBUG]: Running module ssh-import-id (<module 'cloudinit.config.cc_ssh_import_id' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_ssh_import_id.py'>) with frequency once-per-instance
2025-12-07 15:40:42,074 - handlers.py[DEBUG]: start: modules-config/config-ssh-import-id: running config-ssh-import-id with frequency once-per-instance
2025-12-07 15:40:42,074 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_ssh_import_id - wb: [644] 24 bytes
2025-12-07 15:40:42,074 - helpers.py[DEBUG]: Running config-ssh-import-id using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_ssh_import_id'>)
2025-12-07 15:40:42,074 - cc_ssh_import_id.py[DEBUG]: Skipping module named ssh-import-id, no 'ssh_import_id' directives found.
2025-12-07 15:40:42,075 - handlers.py[DEBUG]: finish: modules-config/config-ssh-import-id: SUCCESS: config-ssh-import-id ran successfully
2025-12-07 15:40:42,075 - modules.py[DEBUG]: Running module locale (<module 'cloudinit.config.cc_locale' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_locale.py'>) with frequency once-per-instance
2025-12-07 15:40:42,075 - handlers.py[DEBUG]: start: modules-config/config-locale: running config-locale with frequency once-per-instance
2025-12-07 15:40:42,075 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_locale - wb: [644] 24 bytes
2025-12-07 15:40:42,075 - helpers.py[DEBUG]: Running config-locale using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_locale'>)
2025-12-07 15:40:42,075 - util.py[DEBUG]: Reading from /etc/default/locale (quiet=False)
2025-12-07 15:40:42,075 - util.py[DEBUG]: Read 13 bytes from /etc/default/locale
2025-12-07 15:40:42,075 - cc_locale.py[DEBUG]: Setting locale to C.UTF-8
2025-12-07 15:40:42,075 - debian.py[DEBUG]: System has 'LANG=C.UTF-8' requested 'C.UTF-8', skipping regeneration.
2025-12-07 15:40:42,075 - handlers.py[DEBUG]: finish: modules-config/config-locale: SUCCESS: config-locale ran successfully
2025-12-07 15:40:42,075 - modules.py[DEBUG]: Running module set-passwords (<module 'cloudinit.config.cc_set_passwords' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_set_passwords.py'>) with frequency once-per-instance
2025-12-07 15:40:42,075 - handlers.py[DEBUG]: start: modules-config/config-set-passwords: running config-set-passwords with frequency once-per-instance
2025-12-07 15:40:42,076 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_set_passwords - wb: [644] 24 bytes
2025-12-07 15:40:42,076 - helpers.py[DEBUG]: Running config-set-passwords using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_set_passwords'>)
2025-12-07 15:40:42,076 - ug_util.py[WARNING]: DEPRECATED: 'user' of type string is deprecated and will be removed in a future release. Use 'users' list instead.
2025-12-07 15:40:42,076 - cc_set_passwords.py[DEBUG]: Changing password for ['root']:
2025-12-07 15:40:42,076 - subp.py[DEBUG]: Running command ['chpasswd'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:42,111 - subp.py[DEBUG]: Running command ['systemctl', 'status', 'ssh'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:42,127 - util.py[DEBUG]: Writing to /etc/ssh/sshd_config.d/50-cloud-init.conf - ab: [600] 0 bytes
2025-12-07 15:40:42,127 - util.py[DEBUG]: Reading from /etc/ssh/sshd_config.d/50-cloud-init.conf (quiet=False)
2025-12-07 15:40:42,127 - util.py[DEBUG]: Read 0 bytes from /etc/ssh/sshd_config.d/50-cloud-init.conf
2025-12-07 15:40:42,127 - ssh_util.py[DEBUG]: line 1: option PasswordAuthentication added with yes
2025-12-07 15:40:42,127 - util.py[DEBUG]: Writing to /etc/ssh/sshd_config.d/50-cloud-init.conf - wb: [600] 27 bytes
2025-12-07 15:40:42,128 - subp.py[DEBUG]: Running command ['systemctl', 'restart', 'ssh'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:42,221 - cc_set_passwords.py[DEBUG]: Restarted the SSH daemon.
2025-12-07 15:40:42,222 - handlers.py[DEBUG]: finish: modules-config/config-set-passwords: SUCCESS: config-set-passwords ran successfully
2025-12-07 15:40:42,222 - modules.py[DEBUG]: Running module grub-dpkg (<module 'cloudinit.config.cc_grub_dpkg' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_grub_dpkg.py'>) with frequency once-per-instance
2025-12-07 15:40:42,222 - handlers.py[DEBUG]: start: modules-config/config-grub-dpkg: running config-grub-dpkg with frequency once-per-instance
2025-12-07 15:40:42,223 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_grub_dpkg - wb: [644] 24 bytes
2025-12-07 15:40:42,223 - helpers.py[DEBUG]: Running config-grub-dpkg using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_grub_dpkg'>)
2025-12-07 15:40:42,223 - subp.py[DEBUG]: Running command ['grub-probe', '-t', 'disk', '/boot'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:42,234 - subp.py[DEBUG]: Running command ['udevadm', 'info', '--root', '--query=symlink', '/dev/sda'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:42,241 - cc_grub_dpkg.py[DEBUG]: considering these device symlinks: /dev/disk/by-diskseq/1,/dev/disk/by-id/scsi-0QEMU_QEMU_HARDDISK_drive-scsi0,/dev/disk/by-path/pci-0000:00:05.0-scsi-0:0:0:0
2025-12-07 15:40:42,241 - cc_grub_dpkg.py[DEBUG]: filtered to these disk/by-id symlinks: /dev/disk/by-id/scsi-0QEMU_QEMU_HARDDISK_drive-scsi0
2025-12-07 15:40:42,241 - cc_grub_dpkg.py[DEBUG]: selected /dev/disk/by-id/scsi-0QEMU_QEMU_HARDDISK_drive-scsi0
2025-12-07 15:40:42,242 - cc_grub_dpkg.py[DEBUG]: Setting grub debconf-set-selections with '/dev/disk/by-id/scsi-0QEMU_QEMU_HARDDISK_drive-scsi0','false'
2025-12-07 15:40:42,242 - subp.py[DEBUG]: Running command ['debconf-set-selections'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:42,414 - handlers.py[DEBUG]: finish: modules-config/config-grub-dpkg: SUCCESS: config-grub-dpkg ran successfully
2025-12-07 15:40:42,414 - modules.py[DEBUG]: Running module apt-configure (<module 'cloudinit.config.cc_apt_configure' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_apt_configure.py'>) with frequency once-per-instance
2025-12-07 15:40:42,414 - handlers.py[DEBUG]: start: modules-config/config-apt-configure: running config-apt-configure with frequency once-per-instance
2025-12-07 15:40:42,415 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_apt_configure - wb: [644] 24 bytes
2025-12-07 15:40:42,415 - helpers.py[DEBUG]: Running config-apt-configure using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_apt_configure'>)
2025-12-07 15:40:42,415 - cc_apt_configure.py[DEBUG]: debconf_selections was not set in config
2025-12-07 15:40:42,415 - cc_apt_configure.py[DEBUG]: handling apt config: {'generate_mirrorlists': True, 'preserve_sources_list': True}
2025-12-07 15:40:42,415 - subp.py[DEBUG]: Running command ['lsb_release', '--all'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:42,431 - subp.py[DEBUG]: Running command ['dpkg', '--print-architecture'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:42,437 - cc_apt_configure.py[DEBUG]: got primary mirror: None
2025-12-07 15:40:42,437 - cc_apt_configure.py[DEBUG]: got security mirror: None
2025-12-07 15:40:42,438 - subp.py[DEBUG]: Running command ['dpkg', '--print-architecture'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:40:42,440 - __init__.py[DEBUG]: filtered distro mirror info: {'primary': 'https://deb.debian.org/debian', 'security': 'https://deb.debian.org/debian-security'}
2025-12-07 15:40:42,440 - cc_apt_configure.py[DEBUG]: Apt Mirror info: {'primary': 'https://deb.debian.org/debian', 'security': 'https://deb.debian.org/debian-security', 'PRIMARY': 'https://deb.debian.org/debian', 'SECURITY': 'https://deb.debian.org/debian-security', 'MIRROR': 'https://deb.debian.org/debian'}
2025-12-07 15:40:42,440 - util.py[DEBUG]: Writing to /etc/apt/mirrors/debian.list - wb: [644] 30 bytes
2025-12-07 15:40:42,442 - util.py[DEBUG]: Writing to /etc/apt/mirrors/debian-security.list - wb: [644] 39 bytes
2025-12-07 15:40:42,442 - handlers.py[DEBUG]: finish: modules-config/config-apt-configure: SUCCESS: config-apt-configure ran successfully
2025-12-07 15:40:42,442 - modules.py[DEBUG]: Running module timezone (<module 'cloudinit.config.cc_timezone' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_timezone.py'>) with frequency once-per-instance
2025-12-07 15:40:42,443 - handlers.py[DEBUG]: start: modules-config/config-timezone: running config-timezone with frequency once-per-instance
2025-12-07 15:40:42,443 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_timezone - wb: [644] 24 bytes
2025-12-07 15:40:42,443 - helpers.py[DEBUG]: Running config-timezone using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_timezone'>)
2025-12-07 15:40:42,444 - util.py[DEBUG]: Writing to /etc/timezone - wb: [644] 14 bytes
2025-12-07 15:40:42,445 - util.py[DEBUG]: Attempting to remove /etc/localtime
2025-12-07 15:40:42,445 - handlers.py[DEBUG]: finish: modules-config/config-timezone: SUCCESS: config-timezone ran successfully
2025-12-07 15:40:42,445 - modules.py[DEBUG]: Running module byobu (<module 'cloudinit.config.cc_byobu' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_byobu.py'>) with frequency once-per-instance
2025-12-07 15:40:42,445 - handlers.py[DEBUG]: start: modules-config/config-byobu: running config-byobu with frequency once-per-instance
2025-12-07 15:40:42,445 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_byobu - wb: [644] 23 bytes
2025-12-07 15:40:42,446 - helpers.py[DEBUG]: Running config-byobu using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_byobu'>)
2025-12-07 15:40:42,446 - cc_byobu.py[DEBUG]: Skipping module named byobu, no 'byobu' values found
2025-12-07 15:40:42,446 - handlers.py[DEBUG]: finish: modules-config/config-byobu: SUCCESS: config-byobu ran successfully
2025-12-07 15:40:42,446 - main.py[DEBUG]: Ran 7 modules with 0 failures
2025-12-07 15:40:42,446 - atomic_helper.py[DEBUG]: Atomically writing to file /var/lib/cloud/data/status.json (via temporary file /var/lib/cloud/data/tmp4_irru2o) - w: [644] 775 bytes/chars
2025-12-07 15:40:42,447 - util.py[DEBUG]: Reading from /proc/uptime (quiet=False)
2025-12-07 15:40:42,447 - util.py[DEBUG]: Read 13 bytes from /proc/uptime
2025-12-07 15:40:42,447 - util.py[DEBUG]: cloud-init mode 'modules' took 0.472 seconds (0.47)
2025-12-07 15:40:42,447 - handlers.py[DEBUG]: finish: modules-config: SUCCESS: running modules for config
2025-12-07 15:40:42,856 - util.py[DEBUG]: Cloud-init v. 22.4.2 running 'modules:final' at Sun, 07 Dec 2025 15:40:42 +0000. Up 21.65 seconds.
2025-12-07 15:40:42,857 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,858 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,860 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,860 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,861 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,862 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,864 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,864 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,866 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,866 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,869 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,869 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,871 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,871 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,873 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,873 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,875 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,875 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,878 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,878 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,879 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,879 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,881 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,881 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,882 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,883 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,884 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,884 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,886 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,886 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,888 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,888 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,889 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,890 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,891 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,892 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,893 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,893 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,895 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,895 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,897 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 15:40:42,897 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 15:40:42,899 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2025-12-07 15:40:42,901 - modules.py[INFO]: Skipping modules 'fan,landscape,lxd,puppet,chef,mcollective,salt-minion,phone-home,power-state-change' because no applicable config is provided.
2025-12-07 15:40:42,902 - modules.py[DEBUG]: Running module package-update-upgrade-install (<module 'cloudinit.config.cc_package_update_upgrade_install' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_package_update_upgrade_install.py'>) with frequency once-per-instance
2025-12-07 15:40:42,902 - handlers.py[DEBUG]: start: modules-final/config-package-update-upgrade-install: running config-package-update-upgrade-install with frequency once-per-instance
2025-12-07 15:40:42,902 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_package_update_upgrade_install - wb: [644] 24 bytes
2025-12-07 15:40:42,902 - helpers.py[DEBUG]: Running config-package-update-upgrade-install using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_package_update_upgrade_install'>)
2025-12-07 15:40:42,903 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/update_sources - wb: [644] 24 bytes
2025-12-07 15:40:42,903 - helpers.py[DEBUG]: Running update-sources using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/update_sources'>)
2025-12-07 15:40:42,903 - debian.py[DEBUG]: Waiting for apt lock
2025-12-07 15:40:42,904 - debian.py[DEBUG]: apt lock available
2025-12-07 15:40:42,904 - subp.py[DEBUG]: Running command ['apt-get', '--option=Dpkg::Options::=--force-confold', '--option=Dpkg::options::=--force-unsafe-io', '--assume-yes', '--quiet', 'update'] with allowed return codes [0] (shell=False, capture=False)
2025-12-07 15:40:46,822 - util.py[DEBUG]: apt-update [apt-get --option=Dpkg::Options::=--force-confold --option=Dpkg::options::=--force-unsafe-io --assume-yes --quiet update] took 3.918 seconds
2025-12-07 15:40:46,822 - debian.py[DEBUG]: Waiting for apt lock
2025-12-07 15:40:46,823 - debian.py[DEBUG]: apt lock available
2025-12-07 15:40:46,823 - subp.py[DEBUG]: Running command ['apt-get', '--option=Dpkg::Options::=--force-confold', '--option=Dpkg::options::=--force-unsafe-io', '--assume-yes', '--quiet', 'dist-upgrade'] with allowed return codes [0] (shell=False, capture=False)
2025-12-07 15:41:45,497 - util.py[DEBUG]: apt-upgrade [apt-get --option=Dpkg::Options::=--force-confold --option=Dpkg::options::=--force-unsafe-io --assume-yes --quiet dist-upgrade] took 58.675 seconds
2025-12-07 15:41:45,498 - helpers.py[DEBUG]: update-sources already ran (freq=once-per-instance)
2025-12-07 15:41:45,498 - debian.py[DEBUG]: Waiting for apt lock
2025-12-07 15:41:45,498 - debian.py[DEBUG]: apt lock available
2025-12-07 15:41:45,498 - subp.py[DEBUG]: Running command ['apt-get', '--option=Dpkg::Options::=--force-confold', '--option=Dpkg::options::=--force-unsafe-io', '--assume-yes', '--quiet', 'install', 'cron'] with allowed return codes [0] (shell=False, capture=False)
2025-12-07 15:41:51,640 - util.py[DEBUG]: apt-install [apt-get --option=Dpkg::Options::=--force-confold --option=Dpkg::options::=--force-unsafe-io --assume-yes --quiet install cron] took 6.142 seconds
2025-12-07 15:41:51,641 - handlers.py[DEBUG]: finish: modules-final/config-package-update-upgrade-install: SUCCESS: config-package-update-upgrade-install ran successfully
2025-12-07 15:41:51,641 - modules.py[DEBUG]: Running module write-files-deferred (<module 'cloudinit.config.cc_write_files_deferred' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_write_files_deferred.py'>) with frequency once-per-instance
2025-12-07 15:41:51,641 - handlers.py[DEBUG]: start: modules-final/config-write-files-deferred: running config-write-files-deferred with frequency once-per-instance
2025-12-07 15:41:51,642 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_write_files_deferred - wb: [644] 24 bytes
2025-12-07 15:41:51,643 - helpers.py[DEBUG]: Running config-write-files-deferred using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_write_files_deferred'>)
2025-12-07 15:41:51,643 - cc_write_files_deferred.py[DEBUG]: Skipping module named write-files-deferred, no deferred file defined in configuration
2025-12-07 15:41:51,643 - handlers.py[DEBUG]: finish: modules-final/config-write-files-deferred: SUCCESS: config-write-files-deferred ran successfully
2025-12-07 15:41:51,643 - modules.py[DEBUG]: Running module reset_rmc (<module 'cloudinit.config.cc_reset_rmc' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_reset_rmc.py'>) with frequency once-per-instance
2025-12-07 15:41:51,643 - handlers.py[DEBUG]: start: modules-final/config-reset_rmc: running config-reset_rmc with frequency once-per-instance
2025-12-07 15:41:51,643 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_reset_rmc - wb: [644] 24 bytes
2025-12-07 15:41:51,644 - helpers.py[DEBUG]: Running config-reset_rmc using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_reset_rmc'>)
2025-12-07 15:41:51,644 - cc_reset_rmc.py[DEBUG]: module disabled, RSCT_PATH not present
2025-12-07 15:41:51,644 - handlers.py[DEBUG]: finish: modules-final/config-reset_rmc: SUCCESS: config-reset_rmc ran successfully
2025-12-07 15:41:51,644 - modules.py[DEBUG]: Running module refresh_rmc_and_interface (<module 'cloudinit.config.cc_refresh_rmc_and_interface' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_refresh_rmc_and_interface.py'>) with frequency always
2025-12-07 15:41:51,644 - handlers.py[DEBUG]: start: modules-final/config-refresh_rmc_and_interface: running config-refresh_rmc_and_interface with frequency always
2025-12-07 15:41:51,644 - helpers.py[DEBUG]: Running config-refresh_rmc_and_interface using lock (<cloudinit.helpers.DummyLock object at 0x7f8bc6095c50>)
2025-12-07 15:41:51,644 - cc_refresh_rmc_and_interface.py[DEBUG]: No 'rmcctrl' in path, disabled
2025-12-07 15:41:51,644 - handlers.py[DEBUG]: finish: modules-final/config-refresh_rmc_and_interface: SUCCESS: config-refresh_rmc_and_interface ran successfully
2025-12-07 15:41:51,644 - modules.py[DEBUG]: Running module rightscale_userdata (<module 'cloudinit.config.cc_rightscale_userdata' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_rightscale_userdata.py'>) with frequency once-per-instance
2025-12-07 15:41:51,645 - handlers.py[DEBUG]: start: modules-final/config-rightscale_userdata: running config-rightscale_userdata with frequency once-per-instance
2025-12-07 15:41:51,645 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_rightscale_userdata - wb: [644] 23 bytes
2025-12-07 15:41:51,645 - helpers.py[DEBUG]: Running config-rightscale_userdata using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_rightscale_userdata'>)
2025-12-07 15:41:51,645 - cc_rightscale_userdata.py[DEBUG]: Failed to get raw userdata in module rightscale_userdata
2025-12-07 15:41:51,645 - handlers.py[DEBUG]: finish: modules-final/config-rightscale_userdata: SUCCESS: config-rightscale_userdata ran successfully
2025-12-07 15:41:51,645 - modules.py[DEBUG]: Running module scripts-vendor (<module 'cloudinit.config.cc_scripts_vendor' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_vendor.py'>) with frequency once-per-instance
2025-12-07 15:41:51,645 - handlers.py[DEBUG]: start: modules-final/config-scripts-vendor: running config-scripts-vendor with frequency once-per-instance
2025-12-07 15:41:51,645 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_scripts_vendor - wb: [644] 23 bytes
2025-12-07 15:41:51,646 - helpers.py[DEBUG]: Running config-scripts-vendor using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_scripts_vendor'>)
2025-12-07 15:41:51,646 - handlers.py[DEBUG]: finish: modules-final/config-scripts-vendor: SUCCESS: config-scripts-vendor ran successfully
2025-12-07 15:41:51,646 - modules.py[DEBUG]: Running module scripts-per-once (<module 'cloudinit.config.cc_scripts_per_once' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_per_once.py'>) with frequency once
2025-12-07 15:41:51,647 - handlers.py[DEBUG]: start: modules-final/config-scripts-per-once: running config-scripts-per-once with frequency once
2025-12-07 15:41:51,647 - util.py[DEBUG]: Writing to /var/lib/cloud/sem/config_scripts_per_once.once - wb: [644] 24 bytes
2025-12-07 15:41:51,648 - helpers.py[DEBUG]: Running config-scripts-per-once using lock (<FileLock using file '/var/lib/cloud/sem/config_scripts_per_once.once'>)
2025-12-07 15:41:51,649 - handlers.py[DEBUG]: finish: modules-final/config-scripts-per-once: SUCCESS: config-scripts-per-once ran successfully
2025-12-07 15:41:51,649 - modules.py[DEBUG]: Running module scripts-per-boot (<module 'cloudinit.config.cc_scripts_per_boot' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_per_boot.py'>) with frequency always
2025-12-07 15:41:51,649 - handlers.py[DEBUG]: start: modules-final/config-scripts-per-boot: running config-scripts-per-boot with frequency always
2025-12-07 15:41:51,649 - helpers.py[DEBUG]: Running config-scripts-per-boot using lock (<cloudinit.helpers.DummyLock object at 0x7f8bc6094b10>)
2025-12-07 15:41:51,650 - handlers.py[DEBUG]: finish: modules-final/config-scripts-per-boot: SUCCESS: config-scripts-per-boot ran successfully
2025-12-07 15:41:51,650 - modules.py[DEBUG]: Running module scripts-per-instance (<module 'cloudinit.config.cc_scripts_per_instance' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_per_instance.py'>) with frequency once-per-instance
2025-12-07 15:41:51,650 - handlers.py[DEBUG]: start: modules-final/config-scripts-per-instance: running config-scripts-per-instance with frequency once-per-instance
2025-12-07 15:41:51,650 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_scripts_per_instance - wb: [644] 24 bytes
2025-12-07 15:41:51,651 - helpers.py[DEBUG]: Running config-scripts-per-instance using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_scripts_per_instance'>)
2025-12-07 15:41:51,651 - handlers.py[DEBUG]: finish: modules-final/config-scripts-per-instance: SUCCESS: config-scripts-per-instance ran successfully
2025-12-07 15:41:51,651 - modules.py[DEBUG]: Running module scripts-user (<module 'cloudinit.config.cc_scripts_user' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_user.py'>) with frequency once-per-instance
2025-12-07 15:41:51,651 - handlers.py[DEBUG]: start: modules-final/config-scripts-user: running config-scripts-user with frequency once-per-instance
2025-12-07 15:41:51,652 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_scripts_user - wb: [644] 24 bytes
2025-12-07 15:41:51,652 - helpers.py[DEBUG]: Running config-scripts-user using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_scripts_user'>)
2025-12-07 15:41:51,652 - handlers.py[DEBUG]: finish: modules-final/config-scripts-user: SUCCESS: config-scripts-user ran successfully
2025-12-07 15:41:51,652 - modules.py[DEBUG]: Running module ssh-authkey-fingerprints (<module 'cloudinit.config.cc_ssh_authkey_fingerprints' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_ssh_authkey_fingerprints.py'>) with frequency once-per-instance
2025-12-07 15:41:51,652 - handlers.py[DEBUG]: start: modules-final/config-ssh-authkey-fingerprints: running config-ssh-authkey-fingerprints with frequency once-per-instance
2025-12-07 15:41:51,653 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_ssh_authkey_fingerprints - wb: [644] 24 bytes
2025-12-07 15:41:51,653 - helpers.py[DEBUG]: Running config-ssh-authkey-fingerprints using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_ssh_authkey_fingerprints'>)
2025-12-07 15:41:51,653 - ug_util.py[WARNING]: DEPRECATED: 'user' of type string is deprecated and will be removed in a future release. Use 'users' list instead.
2025-12-07 15:41:51,654 - util.py[DEBUG]: Reading from /etc/ssh/sshd_config (quiet=False)
2025-12-07 15:41:51,654 - util.py[DEBUG]: Read 3230 bytes from /etc/ssh/sshd_config
2025-12-07 15:41:51,655 - util.py[DEBUG]: Reading from /root/.ssh/authorized_keys (quiet=False)
2025-12-07 15:41:51,655 - util.py[DEBUG]: Read 0 bytes from /root/.ssh/authorized_keys
2025-12-07 15:41:51,655 - handlers.py[DEBUG]: finish: modules-final/config-ssh-authkey-fingerprints: SUCCESS: config-ssh-authkey-fingerprints ran successfully
2025-12-07 15:41:51,655 - modules.py[DEBUG]: Running module keys-to-console (<module 'cloudinit.config.cc_keys_to_console' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_keys_to_console.py'>) with frequency once-per-instance
2025-12-07 15:41:51,656 - handlers.py[DEBUG]: start: modules-final/config-keys-to-console: running config-keys-to-console with frequency once-per-instance
2025-12-07 15:41:51,656 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_keys_to_console - wb: [644] 24 bytes
2025-12-07 15:41:51,656 - helpers.py[DEBUG]: Running config-keys-to-console using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_keys_to_console'>)
2025-12-07 15:41:51,656 - subp.py[DEBUG]: Running command ['/usr/lib/cloud-init/write-ssh-key-fingerprints', '', 'ssh-dss'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 15:41:51,720 - handlers.py[DEBUG]: finish: modules-final/config-keys-to-console: SUCCESS: config-keys-to-console ran successfully
2025-12-07 15:41:51,720 - modules.py[DEBUG]: Running module install-hotplug (<module 'cloudinit.config.cc_install_hotplug' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_install_hotplug.py'>) with frequency once-per-instance
2025-12-07 15:41:51,721 - handlers.py[DEBUG]: start: modules-final/config-install-hotplug: running config-install-hotplug with frequency once-per-instance
2025-12-07 15:41:51,721 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_install_hotplug - wb: [644] 23 bytes
2025-12-07 15:41:51,721 - helpers.py[DEBUG]: Running config-install-hotplug using lock (<FileLock using file '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/sem/config_install_hotplug'>)
2025-12-07 15:41:51,722 - stages.py[DEBUG]: Allowed events: {<EventScope.NETWORK: 'network'>: {<EventType.BOOT_NEW_INSTANCE: 'boot-new-instance'>}}
2025-12-07 15:41:51,722 - stages.py[DEBUG]: Event Denied: scopes=['network'] EventType=hotplug
2025-12-07 15:41:51,722 - cc_install_hotplug.py[DEBUG]: Skipping hotplug install, not enabled
2025-12-07 15:41:51,722 - handlers.py[DEBUG]: finish: modules-final/config-install-hotplug: SUCCESS: config-install-hotplug ran successfully
2025-12-07 15:41:51,722 - modules.py[DEBUG]: Running module final-message (<module 'cloudinit.config.cc_final_message' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_final_message.py'>) with frequency always
2025-12-07 15:41:51,722 - handlers.py[DEBUG]: start: modules-final/config-final-message: running config-final-message with frequency always
2025-12-07 15:41:51,722 - helpers.py[DEBUG]: Running config-final-message using lock (<cloudinit.helpers.DummyLock object at 0x7f8bc608b0d0>)
2025-12-07 15:41:51,722 - util.py[DEBUG]: Reading from /proc/uptime (quiet=False)
2025-12-07 15:41:51,722 - util.py[DEBUG]: Read 13 bytes from /proc/uptime
2025-12-07 15:41:51,731 - util.py[DEBUG]: Cloud-init v. 22.4.2 finished at Sun, 07 Dec 2025 15:41:51 +0000. Datasource DataSourceNoCloud [seed=/dev/sr0][dsmode=net].  Up 90.56 seconds
2025-12-07 15:41:51,731 - util.py[DEBUG]: Writing to /var/lib/cloud/instance/boot-finished - wb: [644] 52 bytes
2025-12-07 15:41:51,733 - handlers.py[DEBUG]: finish: modules-final/config-final-message: SUCCESS: config-final-message ran successfully
2025-12-07 15:41:51,733 - main.py[DEBUG]: Ran 14 modules with 0 failures
2025-12-07 15:41:51,734 - atomic_helper.py[DEBUG]: Atomically writing to file /var/lib/cloud/data/status.json (via temporary file /var/lib/cloud/data/tmptuqpzmf8) - w: [644] 803 bytes/chars
2025-12-07 15:41:51,735 - atomic_helper.py[DEBUG]: Atomically writing to file /var/lib/cloud/data/result.json (via temporary file /var/lib/cloud/data/tmpstatud_k) - w: [644] 296 bytes/chars
2025-12-07 15:41:51,735 - util.py[DEBUG]: Creating symbolic link from '/run/cloud-init/result.json' => '../../var/lib/cloud/data/result.json'
2025-12-07 15:41:51,735 - util.py[DEBUG]: Reading from /proc/uptime (quiet=False)
2025-12-07 15:41:51,735 - util.py[DEBUG]: Read 13 bytes from /proc/uptime
2025-12-07 15:41:51,736 - util.py[DEBUG]: cloud-init mode 'modules' took 68.944 seconds (68.95)
2025-12-07 15:41:51,736 - handlers.py[DEBUG]: finish: modules-final: SUCCESS: running modules for final
2025-12-07 16:06:03,093 - util.py[DEBUG]: Cloud-init v. 22.4.2 running 'init-local' at Sun, 07 Dec 2025 16:06:03 +0000. Up 3.72 seconds.
2025-12-07 16:06:03,094 - main.py[DEBUG]: No kernel command line url found.
2025-12-07 16:06:03,094 - main.py[DEBUG]: Closing stdin.
2025-12-07 16:06:03,096 - util.py[DEBUG]: Writing to /var/log/cloud-init.log - ab: [644] 0 bytes
2025-12-07 16:06:03,096 - util.py[DEBUG]: Changing the ownership of /var/log/cloud-init.log to 0:4
2025-12-07 16:06:03,097 - util.py[DEBUG]: Attempting to remove /var/lib/cloud/instance/boot-finished
2025-12-07 16:06:03,097 - handlers.py[DEBUG]: start: init-local/check-cache: attempting to read from cache [check]
2025-12-07 16:06:03,097 - util.py[DEBUG]: Reading from /var/lib/cloud/instance/obj.pkl (quiet=False)
2025-12-07 16:06:03,098 - util.py[DEBUG]: Read 10395 bytes from /var/lib/cloud/instance/obj.pkl
2025-12-07 16:06:03,102 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud/meta-data (quiet=False)
2025-12-07 16:06:03,102 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud-net/meta-data (quiet=False)
2025-12-07 16:06:03,102 - stages.py[DEBUG]: cache invalid in datasource: DataSourceNoCloud [seed=/dev/sr0][dsmode=net]
2025-12-07 16:06:03,102 - handlers.py[DEBUG]: finish: init-local/check-cache: SUCCESS: cache invalid in datasource: DataSourceNoCloud [seed=/dev/sr0][dsmode=net]
2025-12-07 16:06:03,102 - util.py[DEBUG]: Attempting to remove /var/lib/cloud/instance
2025-12-07 16:06:03,105 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2025-12-07 16:06:03,105 - __init__.py[DEBUG]: Looking for data source in: ['NoCloud', 'None'], via packages ['', 'cloudinit.sources'] that matches dependencies ['FILESYSTEM']
2025-12-07 16:06:03,106 - __init__.py[DEBUG]: Searching for local data source in: ['DataSourceNoCloud']
2025-12-07 16:06:03,106 - handlers.py[DEBUG]: start: init-local/search-NoCloud: searching for local data from DataSourceNoCloud
2025-12-07 16:06:03,106 - __init__.py[DEBUG]: Seeing if we can get any data from <class 'cloudinit.sources.DataSourceNoCloud.DataSourceNoCloud'>
2025-12-07 16:06:03,106 - __init__.py[DEBUG]: Update datasource metadata and network config due to events: boot-new-instance
2025-12-07 16:06:03,106 - dmi.py[DEBUG]: querying dmi data /sys/class/dmi/id/product_serial
2025-12-07 16:06:03,106 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud/user-data (quiet=False)
2025-12-07 16:06:03,106 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud/meta-data (quiet=False)
2025-12-07 16:06:03,106 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud/vendor-data (quiet=False)
2025-12-07 16:06:03,106 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud/network-config (quiet=False)
2025-12-07 16:06:03,106 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud-net/user-data (quiet=False)
2025-12-07 16:06:03,106 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud-net/meta-data (quiet=False)
2025-12-07 16:06:03,106 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud-net/vendor-data (quiet=False)
2025-12-07 16:06:03,106 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud-net/network-config (quiet=False)
2025-12-07 16:06:03,106 - subp.py[DEBUG]: Running command ['blkid', '-tTYPE=vfat', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2025-12-07 16:06:03,192 - subp.py[DEBUG]: Running command ['blkid', '-tTYPE=iso9660', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2025-12-07 16:06:03,199 - subp.py[DEBUG]: Running command ['blkid', '-tLABEL=CIDATA', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2025-12-07 16:06:03,206 - subp.py[DEBUG]: Running command ['blkid', '-tLABEL=cidata', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2025-12-07 16:06:03,212 - subp.py[DEBUG]: Running command ['blkid', '-tLABEL_FATBOOT=cidata', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2025-12-07 16:06:03,218 - DataSourceNoCloud.py[DEBUG]: Attempting to use data from /dev/sr0
2025-12-07 16:06:03,219 - util.py[DEBUG]: Reading from /proc/mounts (quiet=False)
2025-12-07 16:06:03,219 - util.py[DEBUG]: Read 1938 bytes from /proc/mounts
2025-12-07 16:06:03,219 - util.py[DEBUG]: Fetched {'sysfs': {'fstype': 'sysfs', 'mountpoint': '/sys', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'proc': {'fstype': 'proc', 'mountpoint': '/proc', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'udev': {'fstype': 'devtmpfs', 'mountpoint': '/dev', 'opts': 'rw,nosuid,relatime,size=6118440k,nr_inodes=1529610,mode=755,inode64'}, 'devpts': {'fstype': 'devpts', 'mountpoint': '/dev/pts', 'opts': 'rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000'}, 'tmpfs': {'fstype': 'tmpfs', 'mountpoint': '/run/lock', 'opts': 'rw,nosuid,nodev,noexec,relatime,size=5120k,inode64'}, '/dev/sda1': {'fstype': 'ext4', 'mountpoint': '/', 'opts': 'rw,relatime,discard,errors=remount-ro'}, 'securityfs': {'fstype': 'securityfs', 'mountpoint': '/sys/kernel/security', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'cgroup2': {'fstype': 'cgroup2', 'mountpoint': '/sys/fs/cgroup', 'opts': 'rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot'}, 'pstore': {'fstype': 'pstore', 'mountpoint': '/sys/fs/pstore', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'bpf': {'fstype': 'bpf', 'mountpoint': '/sys/fs/bpf', 'opts': 'rw,nosuid,nodev,noexec,relatime,mode=700'}, 'systemd-1': {'fstype': 'autofs', 'mountpoint': '/proc/sys/fs/binfmt_misc', 'opts': 'rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=13001'}, 'hugetlbfs': {'fstype': 'hugetlbfs', 'mountpoint': '/dev/hugepages', 'opts': 'rw,relatime,pagesize=2M'}, 'mqueue': {'fstype': 'mqueue', 'mountpoint': '/dev/mqueue', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'debugfs': {'fstype': 'debugfs', 'mountpoint': '/sys/kernel/debug', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'tracefs': {'fstype': 'tracefs', 'mountpoint': '/sys/kernel/tracing', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'fusectl': {'fstype': 'fusectl', 'mountpoint': '/sys/fs/fuse/connections', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'configfs': {'fstype': 'configfs', 'mountpoint': '/sys/kernel/config', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'ramfs': {'fstype': 'ramfs', 'mountpoint': '/run/credentials/systemd-tmpfiles-setup.service', 'opts': 'ro,nosuid,nodev,noexec,relatime,mode=700'}, '/dev/sda15': {'fstype': 'vfat', 'mountpoint': '/boot/efi', 'opts': 'rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro'}} mounts from proc
2025-12-07 16:06:03,219 - subp.py[DEBUG]: Running command ['mount', '-o', 'ro', '-t', 'auto', '/dev/sr0', '/run/cloud-init/tmp/tmpbe2tce_0'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 16:06:03,325 - util.py[DEBUG]: Reading from /run/cloud-init/tmp/tmpbe2tce_0//user-data (quiet=False)
2025-12-07 16:06:03,326 - util.py[DEBUG]: Read 1714 bytes from /run/cloud-init/tmp/tmpbe2tce_0//user-data
2025-12-07 16:06:03,326 - util.py[DEBUG]: Reading from /run/cloud-init/tmp/tmpbe2tce_0//meta-data (quiet=False)
2025-12-07 16:06:03,327 - util.py[DEBUG]: Read 54 bytes from /run/cloud-init/tmp/tmpbe2tce_0//meta-data
2025-12-07 16:06:03,327 - util.py[DEBUG]: Reading from /run/cloud-init/tmp/tmpbe2tce_0//vendor-data (quiet=False)
2025-12-07 16:06:03,327 - util.py[DEBUG]: Read 0 bytes from /run/cloud-init/tmp/tmpbe2tce_0//vendor-data
2025-12-07 16:06:03,327 - util.py[DEBUG]: Reading from /run/cloud-init/tmp/tmpbe2tce_0//network-config (quiet=False)
2025-12-07 16:06:03,328 - util.py[DEBUG]: Read 455 bytes from /run/cloud-init/tmp/tmpbe2tce_0//network-config
2025-12-07 16:06:03,328 - subp.py[DEBUG]: Running command ['umount', '/run/cloud-init/tmp/tmpbe2tce_0'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 16:06:03,332 - util.py[DEBUG]: Attempting to load yaml from string of length 54 with allowed root types (<class 'dict'>,)
2025-12-07 16:06:03,333 - util.py[DEBUG]: Attempting to load yaml from string of length 455 with allowed root types (<class 'dict'>,)
2025-12-07 16:06:03,336 - DataSourceNoCloud.py[DEBUG]: Using data from /dev/sr0
2025-12-07 16:06:03,336 - util.py[DEBUG]: Reading from /etc/hosts (quiet=False)
2025-12-07 16:06:03,337 - util.py[DEBUG]: Read 565 bytes from /etc/hosts
2025-12-07 16:06:03,338 - util.py[DEBUG]: Writing to /run/cloud-init/cloud-id-nocloud - wb: [644] 8 bytes
2025-12-07 16:06:03,339 - util.py[DEBUG]: Creating symbolic link from '/run/cloud-init/cloud-id' => '/run/cloud-init/cloud-id-nocloud'
2025-12-07 16:06:03,339 - atomic_helper.py[DEBUG]: Atomically writing to file /run/cloud-init/instance-data-sensitive.json (via temporary file /run/cloud-init/tmpe0c_eroi) - w: [600] 6783 bytes/chars
2025-12-07 16:06:03,340 - atomic_helper.py[DEBUG]: Atomically writing to file /run/cloud-init/instance-data.json (via temporary file /run/cloud-init/tmp__450x4_) - w: [644] 1521 bytes/chars
2025-12-07 16:06:03,340 - handlers.py[DEBUG]: finish: init-local/search-NoCloud: SUCCESS: found local data from DataSourceNoCloud
2025-12-07 16:06:03,341 - stages.py[INFO]: Loaded datasource DataSourceNoCloud - DataSourceNoCloud [seed=/dev/sr0][dsmode=net]
2025-12-07 16:06:03,341 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg (quiet=False)
2025-12-07 16:06:03,341 - util.py[DEBUG]: Read 2796 bytes from /etc/cloud/cloud.cfg
2025-12-07 16:06:03,341 - util.py[DEBUG]: Attempting to load yaml from string of length 2796 with allowed root types (<class 'dict'>,)
2025-12-07 16:06:03,351 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/99-ssh.cfg (quiet=False)
2025-12-07 16:06:03,352 - util.py[DEBUG]: Read 48 bytes from /etc/cloud/cloud.cfg.d/99-ssh.cfg
2025-12-07 16:06:03,352 - util.py[DEBUG]: Attempting to load yaml from string of length 48 with allowed root types (<class 'dict'>,)
2025-12-07 16:06:03,352 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/05_logging.cfg (quiet=False)
2025-12-07 16:06:03,352 - util.py[DEBUG]: Read 2070 bytes from /etc/cloud/cloud.cfg.d/05_logging.cfg
2025-12-07 16:06:03,352 - util.py[DEBUG]: Attempting to load yaml from string of length 2070 with allowed root types (<class 'dict'>,)
2025-12-07 16:06:03,356 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg (quiet=False)
2025-12-07 16:06:03,356 - util.py[DEBUG]: Read 309 bytes from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg
2025-12-07 16:06:03,356 - util.py[DEBUG]: Attempting to load yaml from string of length 309 with allowed root types (<class 'dict'>,)
2025-12-07 16:06:03,359 - util.py[DEBUG]: Reading from /run/cloud-init/cloud.cfg (quiet=False)
2025-12-07 16:06:03,359 - util.py[DEBUG]: Read 35 bytes from /run/cloud-init/cloud.cfg
2025-12-07 16:06:03,359 - util.py[DEBUG]: Attempting to load yaml from string of length 35 with allowed root types (<class 'dict'>,)
2025-12-07 16:06:03,359 - util.py[DEBUG]: Attempting to load yaml from string of length 0 with allowed root types (<class 'dict'>,)
2025-12-07 16:06:03,359 - util.py[DEBUG]: loaded blob returned None, returning default.
2025-12-07 16:06:03,360 - util.py[DEBUG]: Attempting to remove /var/lib/cloud/instance
2025-12-07 16:06:03,360 - util.py[DEBUG]: Creating symbolic link from '/var/lib/cloud/instance' => '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184'
2025-12-07 16:06:03,361 - util.py[DEBUG]: Reading from /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/datasource (quiet=False)
2025-12-07 16:06:03,361 - util.py[DEBUG]: Read 65 bytes from /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/datasource
2025-12-07 16:06:03,361 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/datasource - wb: [644] 65 bytes
2025-12-07 16:06:03,362 - util.py[DEBUG]: Writing to /var/lib/cloud/data/previous-datasource - wb: [644] 65 bytes
2025-12-07 16:06:03,363 - util.py[DEBUG]: Reading from /var/lib/cloud/data/instance-id (quiet=False)
2025-12-07 16:06:03,363 - util.py[DEBUG]: Read 41 bytes from /var/lib/cloud/data/instance-id
2025-12-07 16:06:03,363 - stages.py[DEBUG]: previous iid found to be 3a7b79c34864e435b2e39df1a836248be4942184
2025-12-07 16:06:03,363 - util.py[DEBUG]: Writing to /var/lib/cloud/data/instance-id - wb: [644] 41 bytes
2025-12-07 16:06:03,364 - util.py[DEBUG]: Writing to /run/cloud-init/.instance-id - wb: [644] 41 bytes
2025-12-07 16:06:03,364 - util.py[DEBUG]: Writing to /var/lib/cloud/data/previous-instance-id - wb: [644] 41 bytes
2025-12-07 16:06:03,365 - util.py[DEBUG]: Writing to /var/lib/cloud/instance/obj.pkl - wb: [400] 8298 bytes
2025-12-07 16:06:03,366 - main.py[DEBUG]: [local] init will now be targeting instance id: 3a7b79c34864e435b2e39df1a836248be4942184. new=False
2025-12-07 16:06:03,366 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg (quiet=False)
2025-12-07 16:06:03,366 - util.py[DEBUG]: Read 2796 bytes from /etc/cloud/cloud.cfg
2025-12-07 16:06:03,366 - util.py[DEBUG]: Attempting to load yaml from string of length 2796 with allowed root types (<class 'dict'>,)
2025-12-07 16:06:03,377 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/99-ssh.cfg (quiet=False)
2025-12-07 16:06:03,377 - util.py[DEBUG]: Read 48 bytes from /etc/cloud/cloud.cfg.d/99-ssh.cfg
2025-12-07 16:06:03,377 - util.py[DEBUG]: Attempting to load yaml from string of length 48 with allowed root types (<class 'dict'>,)
2025-12-07 16:06:03,377 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/05_logging.cfg (quiet=False)
2025-12-07 16:06:03,377 - util.py[DEBUG]: Read 2070 bytes from /etc/cloud/cloud.cfg.d/05_logging.cfg
2025-12-07 16:06:03,378 - util.py[DEBUG]: Attempting to load yaml from string of length 2070 with allowed root types (<class 'dict'>,)
2025-12-07 16:06:03,381 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg (quiet=False)
2025-12-07 16:06:03,381 - util.py[DEBUG]: Read 309 bytes from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg
2025-12-07 16:06:03,381 - util.py[DEBUG]: Attempting to load yaml from string of length 309 with allowed root types (<class 'dict'>,)
2025-12-07 16:06:03,384 - util.py[DEBUG]: Reading from /run/cloud-init/cloud.cfg (quiet=False)
2025-12-07 16:06:03,384 - util.py[DEBUG]: Read 35 bytes from /run/cloud-init/cloud.cfg
2025-12-07 16:06:03,384 - util.py[DEBUG]: Attempting to load yaml from string of length 35 with allowed root types (<class 'dict'>,)
2025-12-07 16:06:03,384 - util.py[DEBUG]: Attempting to load yaml from string of length 0 with allowed root types (<class 'dict'>,)
2025-12-07 16:06:03,385 - util.py[DEBUG]: loaded blob returned None, returning default.
2025-12-07 16:06:03,385 - util.py[DEBUG]: Reading from /var/lib/cloud/instance/cloud-config.txt (quiet=False)
2025-12-07 16:06:03,385 - util.py[DEBUG]: Read 1742 bytes from /var/lib/cloud/instance/cloud-config.txt
2025-12-07 16:06:03,385 - util.py[DEBUG]: Attempting to load yaml from string of length 1742 with allowed root types (<class 'dict'>,)
2025-12-07 16:06:03,392 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2025-12-07 16:06:03,392 - util.py[DEBUG]: Reading from /var/lib/cloud/data/set-hostname (quiet=False)
2025-12-07 16:06:03,393 - util.py[DEBUG]: Read 71 bytes from /var/lib/cloud/data/set-hostname
2025-12-07 16:06:03,393 - cc_set_hostname.py[DEBUG]: No hostname changes. Skipping set-hostname
2025-12-07 16:06:03,394 - util.py[DEBUG]: Reading from /sys/class/net/lo/address (quiet=False)
2025-12-07 16:06:03,394 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/lo/address
2025-12-07 16:06:03,394 - util.py[DEBUG]: Reading from /sys/class/net/eth0/address (quiet=False)
2025-12-07 16:06:03,394 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/eth0/address
2025-12-07 16:06:03,395 - stages.py[DEBUG]: Allowed events: {<EventScope.NETWORK: 'network'>: {<EventType.BOOT_NEW_INSTANCE: 'boot-new-instance'>}}
2025-12-07 16:06:03,395 - stages.py[DEBUG]: Event Denied: scopes=['network'] EventType=boot
2025-12-07 16:06:03,395 - stages.py[DEBUG]: Allowed events: {<EventScope.NETWORK: 'network'>: {<EventType.BOOT_NEW_INSTANCE: 'boot-new-instance'>}}
2025-12-07 16:06:03,395 - stages.py[DEBUG]: Event Denied: scopes=['network'] EventType=boot-legacy
2025-12-07 16:06:03,395 - stages.py[DEBUG]: No network config applied. Neither a new instance nor datasource network update allowed
2025-12-07 16:06:03,395 - stages.py[DEBUG]: applying net config names for {'version': 1, 'config': [{'type': 'physical', 'name': 'eth0', 'mac_address': '00:50:56:5e:95:7b', 'subnets': [{'type': 'static', 'address': '109.199.123.73', 'netmask': '255.255.240.0', 'gateway': '109.199.112.1'}, {'type': 'static6', 'address': '2a02:c207:2293:6396:0000:0000:0000:0001/64', 'gateway': 'fe80::1'}]}, {'type': 'nameserver', 'address': ['213.136.95.10', '213.136.95.11', '2a02:c207::1:53']}]}
2025-12-07 16:06:03,395 - util.py[DEBUG]: Reading from /sys/class/net/eth0/device/device (quiet=False)
2025-12-07 16:06:03,395 - util.py[DEBUG]: Read 7 bytes from /sys/class/net/eth0/device/device
2025-12-07 16:06:03,396 - util.py[DEBUG]: Reading from /sys/class/net/lo/addr_assign_type (quiet=False)
2025-12-07 16:06:03,396 - util.py[DEBUG]: Read 2 bytes from /sys/class/net/lo/addr_assign_type
2025-12-07 16:06:03,396 - util.py[DEBUG]: Reading from /sys/class/net/lo/uevent (quiet=False)
2025-12-07 16:06:03,396 - util.py[DEBUG]: Read 23 bytes from /sys/class/net/lo/uevent
2025-12-07 16:06:03,396 - util.py[DEBUG]: Reading from /sys/class/net/lo/address (quiet=False)
2025-12-07 16:06:03,396 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/lo/address
2025-12-07 16:06:03,396 - __init__.py[DEBUG]: ovs-vsctl not in PATH; not detecting Open vSwitch interfaces
2025-12-07 16:06:03,396 - util.py[DEBUG]: Reading from /sys/class/net/lo/device/device (quiet=False)
2025-12-07 16:06:03,396 - util.py[DEBUG]: Reading from /sys/class/net/eth0/addr_assign_type (quiet=False)
2025-12-07 16:06:03,396 - util.py[DEBUG]: Read 2 bytes from /sys/class/net/eth0/addr_assign_type
2025-12-07 16:06:03,396 - util.py[DEBUG]: Reading from /sys/class/net/eth0/uevent (quiet=False)
2025-12-07 16:06:03,396 - util.py[DEBUG]: Read 25 bytes from /sys/class/net/eth0/uevent
2025-12-07 16:06:03,396 - util.py[DEBUG]: Reading from /sys/class/net/eth0/address (quiet=False)
2025-12-07 16:06:03,397 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/eth0/address
2025-12-07 16:06:03,397 - util.py[DEBUG]: Reading from /sys/class/net/eth0/device/device (quiet=False)
2025-12-07 16:06:03,397 - util.py[DEBUG]: Read 7 bytes from /sys/class/net/eth0/device/device
2025-12-07 16:06:03,397 - util.py[DEBUG]: Reading from /sys/class/net/lo/operstate (quiet=False)
2025-12-07 16:06:03,397 - util.py[DEBUG]: Read 8 bytes from /sys/class/net/lo/operstate
2025-12-07 16:06:03,397 - util.py[DEBUG]: Reading from /sys/class/net/eth0/operstate (quiet=False)
2025-12-07 16:06:03,397 - util.py[DEBUG]: Read 5 bytes from /sys/class/net/eth0/operstate
2025-12-07 16:06:03,397 - subp.py[DEBUG]: Running command ['ip', '-6', 'addr', 'show', 'permanent', 'scope', 'global'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 16:06:03,420 - subp.py[DEBUG]: Running command ['ip', '-4', 'addr', 'show'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 16:06:03,426 - __init__.py[DEBUG]: Detected interfaces {'lo': {'downable': False, 'device_id': None, 'driver': None, 'mac': '00:00:00:00:00:00', 'name': 'lo', 'up': True}, 'eth0': {'downable': True, 'device_id': '0x0001', 'driver': 'virtio_net', 'mac': '00:50:56:5e:95:7b', 'name': 'eth0', 'up': False}}
2025-12-07 16:06:03,426 - __init__.py[DEBUG]: no work necessary for renaming of [['00:50:56:5e:95:7b', 'eth0', 'virtio_net', '0x0001']]
2025-12-07 16:06:03,426 - main.py[DEBUG]: [local] Exiting. datasource DataSourceNoCloud [seed=/dev/sr0][dsmode=net] not in local mode.
2025-12-07 16:06:03,427 - atomic_helper.py[DEBUG]: Atomically writing to file /var/lib/cloud/data/status.json (via temporary file /var/lib/cloud/data/tmpu82i9s_1) - w: [644] 515 bytes/chars
2025-12-07 16:06:03,427 - util.py[DEBUG]: Reading from /proc/uptime (quiet=False)
2025-12-07 16:06:03,428 - util.py[DEBUG]: Read 11 bytes from /proc/uptime
2025-12-07 16:06:03,428 - util.py[DEBUG]: cloud-init mode 'init' took 0.377 seconds (0.38)
2025-12-07 16:06:03,428 - handlers.py[DEBUG]: finish: init-local: SUCCESS: searching for local datasources
2025-12-07 16:06:17,779 - util.py[DEBUG]: Cloud-init v. 22.4.2 running 'modules:config' at Sun, 07 Dec 2025 16:06:17 +0000. Up 18.39 seconds.
2025-12-07 16:06:17,780 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:17,780 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:17,783 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:17,783 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:17,784 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:17,785 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:17,786 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:17,786 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:17,788 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:17,788 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:17,790 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:17,790 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:17,792 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:17,792 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:17,795 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:17,795 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:17,798 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:17,798 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:17,799 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:17,800 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:17,801 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:17,802 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:17,803 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:17,803 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:17,805 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:17,805 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:17,806 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2025-12-07 16:06:17,808 - modules.py[INFO]: Skipping modules 'snap,keyboard,apt-pipelining,ntp,disable-ec2-metadata,runcmd' because no applicable config is provided.
2025-12-07 16:06:17,808 - modules.py[DEBUG]: Running module ssh-import-id (<module 'cloudinit.config.cc_ssh_import_id' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_ssh_import_id.py'>) with frequency once-per-instance
2025-12-07 16:06:17,808 - handlers.py[DEBUG]: start: modules-config/config-ssh-import-id: running config-ssh-import-id with frequency once-per-instance
2025-12-07 16:06:17,808 - helpers.py[DEBUG]: config-ssh-import-id already ran (freq=once-per-instance)
2025-12-07 16:06:17,809 - handlers.py[DEBUG]: finish: modules-config/config-ssh-import-id: SUCCESS: config-ssh-import-id previously ran
2025-12-07 16:06:17,809 - modules.py[DEBUG]: Running module locale (<module 'cloudinit.config.cc_locale' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_locale.py'>) with frequency once-per-instance
2025-12-07 16:06:17,809 - handlers.py[DEBUG]: start: modules-config/config-locale: running config-locale with frequency once-per-instance
2025-12-07 16:06:17,809 - helpers.py[DEBUG]: config-locale already ran (freq=once-per-instance)
2025-12-07 16:06:17,809 - handlers.py[DEBUG]: finish: modules-config/config-locale: SUCCESS: config-locale previously ran
2025-12-07 16:06:17,809 - modules.py[DEBUG]: Running module set-passwords (<module 'cloudinit.config.cc_set_passwords' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_set_passwords.py'>) with frequency once-per-instance
2025-12-07 16:06:17,809 - handlers.py[DEBUG]: start: modules-config/config-set-passwords: running config-set-passwords with frequency once-per-instance
2025-12-07 16:06:17,809 - helpers.py[DEBUG]: config-set-passwords already ran (freq=once-per-instance)
2025-12-07 16:06:17,809 - handlers.py[DEBUG]: finish: modules-config/config-set-passwords: SUCCESS: config-set-passwords previously ran
2025-12-07 16:06:17,809 - modules.py[DEBUG]: Running module grub-dpkg (<module 'cloudinit.config.cc_grub_dpkg' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_grub_dpkg.py'>) with frequency once-per-instance
2025-12-07 16:06:17,809 - handlers.py[DEBUG]: start: modules-config/config-grub-dpkg: running config-grub-dpkg with frequency once-per-instance
2025-12-07 16:06:17,809 - helpers.py[DEBUG]: config-grub-dpkg already ran (freq=once-per-instance)
2025-12-07 16:06:17,809 - handlers.py[DEBUG]: finish: modules-config/config-grub-dpkg: SUCCESS: config-grub-dpkg previously ran
2025-12-07 16:06:17,809 - modules.py[DEBUG]: Running module apt-configure (<module 'cloudinit.config.cc_apt_configure' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_apt_configure.py'>) with frequency once-per-instance
2025-12-07 16:06:17,809 - handlers.py[DEBUG]: start: modules-config/config-apt-configure: running config-apt-configure with frequency once-per-instance
2025-12-07 16:06:17,809 - helpers.py[DEBUG]: config-apt-configure already ran (freq=once-per-instance)
2025-12-07 16:06:17,809 - handlers.py[DEBUG]: finish: modules-config/config-apt-configure: SUCCESS: config-apt-configure previously ran
2025-12-07 16:06:17,810 - modules.py[DEBUG]: Running module timezone (<module 'cloudinit.config.cc_timezone' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_timezone.py'>) with frequency once-per-instance
2025-12-07 16:06:17,810 - handlers.py[DEBUG]: start: modules-config/config-timezone: running config-timezone with frequency once-per-instance
2025-12-07 16:06:17,810 - helpers.py[DEBUG]: config-timezone already ran (freq=once-per-instance)
2025-12-07 16:06:17,810 - handlers.py[DEBUG]: finish: modules-config/config-timezone: SUCCESS: config-timezone previously ran
2025-12-07 16:06:17,810 - modules.py[DEBUG]: Running module byobu (<module 'cloudinit.config.cc_byobu' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_byobu.py'>) with frequency once-per-instance
2025-12-07 16:06:17,810 - handlers.py[DEBUG]: start: modules-config/config-byobu: running config-byobu with frequency once-per-instance
2025-12-07 16:06:17,810 - helpers.py[DEBUG]: config-byobu already ran (freq=once-per-instance)
2025-12-07 16:06:17,810 - handlers.py[DEBUG]: finish: modules-config/config-byobu: SUCCESS: config-byobu previously ran
2025-12-07 16:06:17,810 - main.py[DEBUG]: Ran 7 modules with 0 failures
2025-12-07 16:06:17,810 - atomic_helper.py[DEBUG]: Atomically writing to file /var/lib/cloud/data/status.json (via temporary file /var/lib/cloud/data/tmpktvdg7cf) - w: [644] 543 bytes/chars
2025-12-07 16:06:17,811 - util.py[DEBUG]: Reading from /proc/uptime (quiet=False)
2025-12-07 16:06:17,811 - util.py[DEBUG]: Read 12 bytes from /proc/uptime
2025-12-07 16:06:17,811 - util.py[DEBUG]: cloud-init mode 'modules' took 0.094 seconds (0.09)
2025-12-07 16:06:17,811 - handlers.py[DEBUG]: finish: modules-config: SUCCESS: running modules for config
2025-12-07 16:06:18,159 - util.py[DEBUG]: Cloud-init v. 22.4.2 running 'modules:final' at Sun, 07 Dec 2025 16:06:18 +0000. Up 18.77 seconds.
2025-12-07 16:06:18,160 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,160 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,162 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,162 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,164 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,164 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,166 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,166 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,169 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,169 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,172 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,172 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,174 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,174 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,175 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,176 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,177 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,177 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,179 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,179 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,180 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,181 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,182 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,182 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,183 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,183 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,184 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,184 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,186 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,186 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,187 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,187 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,189 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,189 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,190 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,190 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,192 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,192 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,193 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,193 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,194 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:06:18,195 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:06:18,196 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2025-12-07 16:06:18,198 - modules.py[INFO]: Skipping modules 'fan,landscape,lxd,puppet,chef,mcollective,salt-minion,phone-home,power-state-change' because no applicable config is provided.
2025-12-07 16:06:18,198 - modules.py[DEBUG]: Running module package-update-upgrade-install (<module 'cloudinit.config.cc_package_update_upgrade_install' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_package_update_upgrade_install.py'>) with frequency once-per-instance
2025-12-07 16:06:18,198 - handlers.py[DEBUG]: start: modules-final/config-package-update-upgrade-install: running config-package-update-upgrade-install with frequency once-per-instance
2025-12-07 16:06:18,198 - helpers.py[DEBUG]: config-package-update-upgrade-install already ran (freq=once-per-instance)
2025-12-07 16:06:18,199 - handlers.py[DEBUG]: finish: modules-final/config-package-update-upgrade-install: SUCCESS: config-package-update-upgrade-install previously ran
2025-12-07 16:06:18,199 - modules.py[DEBUG]: Running module write-files-deferred (<module 'cloudinit.config.cc_write_files_deferred' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_write_files_deferred.py'>) with frequency once-per-instance
2025-12-07 16:06:18,199 - handlers.py[DEBUG]: start: modules-final/config-write-files-deferred: running config-write-files-deferred with frequency once-per-instance
2025-12-07 16:06:18,199 - helpers.py[DEBUG]: config-write-files-deferred already ran (freq=once-per-instance)
2025-12-07 16:06:18,199 - handlers.py[DEBUG]: finish: modules-final/config-write-files-deferred: SUCCESS: config-write-files-deferred previously ran
2025-12-07 16:06:18,199 - modules.py[DEBUG]: Running module reset_rmc (<module 'cloudinit.config.cc_reset_rmc' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_reset_rmc.py'>) with frequency once-per-instance
2025-12-07 16:06:18,199 - handlers.py[DEBUG]: start: modules-final/config-reset_rmc: running config-reset_rmc with frequency once-per-instance
2025-12-07 16:06:18,199 - helpers.py[DEBUG]: config-reset_rmc already ran (freq=once-per-instance)
2025-12-07 16:06:18,199 - handlers.py[DEBUG]: finish: modules-final/config-reset_rmc: SUCCESS: config-reset_rmc previously ran
2025-12-07 16:06:18,199 - modules.py[DEBUG]: Running module refresh_rmc_and_interface (<module 'cloudinit.config.cc_refresh_rmc_and_interface' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_refresh_rmc_and_interface.py'>) with frequency always
2025-12-07 16:06:18,199 - handlers.py[DEBUG]: start: modules-final/config-refresh_rmc_and_interface: running config-refresh_rmc_and_interface with frequency always
2025-12-07 16:06:18,199 - helpers.py[DEBUG]: Running config-refresh_rmc_and_interface using lock (<cloudinit.helpers.DummyLock object at 0x7f22ca24ac10>)
2025-12-07 16:06:18,199 - cc_refresh_rmc_and_interface.py[DEBUG]: No 'rmcctrl' in path, disabled
2025-12-07 16:06:18,199 - handlers.py[DEBUG]: finish: modules-final/config-refresh_rmc_and_interface: SUCCESS: config-refresh_rmc_and_interface ran successfully
2025-12-07 16:06:18,199 - modules.py[DEBUG]: Running module rightscale_userdata (<module 'cloudinit.config.cc_rightscale_userdata' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_rightscale_userdata.py'>) with frequency once-per-instance
2025-12-07 16:06:18,200 - handlers.py[DEBUG]: start: modules-final/config-rightscale_userdata: running config-rightscale_userdata with frequency once-per-instance
2025-12-07 16:06:18,200 - helpers.py[DEBUG]: config-rightscale_userdata already ran (freq=once-per-instance)
2025-12-07 16:06:18,200 - handlers.py[DEBUG]: finish: modules-final/config-rightscale_userdata: SUCCESS: config-rightscale_userdata previously ran
2025-12-07 16:06:18,200 - modules.py[DEBUG]: Running module scripts-vendor (<module 'cloudinit.config.cc_scripts_vendor' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_vendor.py'>) with frequency once-per-instance
2025-12-07 16:06:18,200 - handlers.py[DEBUG]: start: modules-final/config-scripts-vendor: running config-scripts-vendor with frequency once-per-instance
2025-12-07 16:06:18,200 - helpers.py[DEBUG]: config-scripts-vendor already ran (freq=once-per-instance)
2025-12-07 16:06:18,200 - handlers.py[DEBUG]: finish: modules-final/config-scripts-vendor: SUCCESS: config-scripts-vendor previously ran
2025-12-07 16:06:18,200 - modules.py[DEBUG]: Running module scripts-per-once (<module 'cloudinit.config.cc_scripts_per_once' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_per_once.py'>) with frequency once
2025-12-07 16:06:18,200 - handlers.py[DEBUG]: start: modules-final/config-scripts-per-once: running config-scripts-per-once with frequency once
2025-12-07 16:06:18,200 - helpers.py[DEBUG]: config-scripts-per-once already ran (freq=once)
2025-12-07 16:06:18,200 - handlers.py[DEBUG]: finish: modules-final/config-scripts-per-once: SUCCESS: config-scripts-per-once previously ran
2025-12-07 16:06:18,200 - modules.py[DEBUG]: Running module scripts-per-boot (<module 'cloudinit.config.cc_scripts_per_boot' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_per_boot.py'>) with frequency always
2025-12-07 16:06:18,200 - handlers.py[DEBUG]: start: modules-final/config-scripts-per-boot: running config-scripts-per-boot with frequency always
2025-12-07 16:06:18,201 - helpers.py[DEBUG]: Running config-scripts-per-boot using lock (<cloudinit.helpers.DummyLock object at 0x7f22ca24b710>)
2025-12-07 16:06:18,201 - handlers.py[DEBUG]: finish: modules-final/config-scripts-per-boot: SUCCESS: config-scripts-per-boot ran successfully
2025-12-07 16:06:18,201 - modules.py[DEBUG]: Running module scripts-per-instance (<module 'cloudinit.config.cc_scripts_per_instance' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_per_instance.py'>) with frequency once-per-instance
2025-12-07 16:06:18,201 - handlers.py[DEBUG]: start: modules-final/config-scripts-per-instance: running config-scripts-per-instance with frequency once-per-instance
2025-12-07 16:06:18,201 - helpers.py[DEBUG]: config-scripts-per-instance already ran (freq=once-per-instance)
2025-12-07 16:06:18,201 - handlers.py[DEBUG]: finish: modules-final/config-scripts-per-instance: SUCCESS: config-scripts-per-instance previously ran
2025-12-07 16:06:18,201 - modules.py[DEBUG]: Running module scripts-user (<module 'cloudinit.config.cc_scripts_user' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_user.py'>) with frequency once-per-instance
2025-12-07 16:06:18,201 - handlers.py[DEBUG]: start: modules-final/config-scripts-user: running config-scripts-user with frequency once-per-instance
2025-12-07 16:06:18,201 - helpers.py[DEBUG]: config-scripts-user already ran (freq=once-per-instance)
2025-12-07 16:06:18,201 - handlers.py[DEBUG]: finish: modules-final/config-scripts-user: SUCCESS: config-scripts-user previously ran
2025-12-07 16:06:18,201 - modules.py[DEBUG]: Running module ssh-authkey-fingerprints (<module 'cloudinit.config.cc_ssh_authkey_fingerprints' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_ssh_authkey_fingerprints.py'>) with frequency once-per-instance
2025-12-07 16:06:18,201 - handlers.py[DEBUG]: start: modules-final/config-ssh-authkey-fingerprints: running config-ssh-authkey-fingerprints with frequency once-per-instance
2025-12-07 16:06:18,201 - helpers.py[DEBUG]: config-ssh-authkey-fingerprints already ran (freq=once-per-instance)
2025-12-07 16:06:18,201 - handlers.py[DEBUG]: finish: modules-final/config-ssh-authkey-fingerprints: SUCCESS: config-ssh-authkey-fingerprints previously ran
2025-12-07 16:06:18,201 - modules.py[DEBUG]: Running module keys-to-console (<module 'cloudinit.config.cc_keys_to_console' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_keys_to_console.py'>) with frequency once-per-instance
2025-12-07 16:06:18,202 - handlers.py[DEBUG]: start: modules-final/config-keys-to-console: running config-keys-to-console with frequency once-per-instance
2025-12-07 16:06:18,202 - helpers.py[DEBUG]: config-keys-to-console already ran (freq=once-per-instance)
2025-12-07 16:06:18,202 - handlers.py[DEBUG]: finish: modules-final/config-keys-to-console: SUCCESS: config-keys-to-console previously ran
2025-12-07 16:06:18,202 - modules.py[DEBUG]: Running module install-hotplug (<module 'cloudinit.config.cc_install_hotplug' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_install_hotplug.py'>) with frequency once-per-instance
2025-12-07 16:06:18,202 - handlers.py[DEBUG]: start: modules-final/config-install-hotplug: running config-install-hotplug with frequency once-per-instance
2025-12-07 16:06:18,202 - helpers.py[DEBUG]: config-install-hotplug already ran (freq=once-per-instance)
2025-12-07 16:06:18,202 - handlers.py[DEBUG]: finish: modules-final/config-install-hotplug: SUCCESS: config-install-hotplug previously ran
2025-12-07 16:06:18,202 - modules.py[DEBUG]: Running module final-message (<module 'cloudinit.config.cc_final_message' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_final_message.py'>) with frequency always
2025-12-07 16:06:18,202 - handlers.py[DEBUG]: start: modules-final/config-final-message: running config-final-message with frequency always
2025-12-07 16:06:18,202 - helpers.py[DEBUG]: Running config-final-message using lock (<cloudinit.helpers.DummyLock object at 0x7f22ca269d10>)
2025-12-07 16:06:18,202 - util.py[DEBUG]: Reading from /proc/uptime (quiet=False)
2025-12-07 16:06:18,202 - util.py[DEBUG]: Read 13 bytes from /proc/uptime
2025-12-07 16:06:18,206 - util.py[DEBUG]: Cloud-init v. 22.4.2 finished at Sun, 07 Dec 2025 16:06:18 +0000. Datasource DataSourceNoCloud [seed=/dev/sr0][dsmode=net].  Up 18.85 seconds
2025-12-07 16:06:18,207 - util.py[DEBUG]: Writing to /var/lib/cloud/instance/boot-finished - wb: [644] 52 bytes
2025-12-07 16:06:18,207 - handlers.py[DEBUG]: finish: modules-final/config-final-message: SUCCESS: config-final-message ran successfully
2025-12-07 16:06:18,207 - main.py[DEBUG]: Ran 14 modules with 0 failures
2025-12-07 16:06:18,207 - atomic_helper.py[DEBUG]: Atomically writing to file /var/lib/cloud/data/status.json (via temporary file /var/lib/cloud/data/tmpw7j4z_t4) - w: [644] 571 bytes/chars
2025-12-07 16:06:18,208 - atomic_helper.py[DEBUG]: Atomically writing to file /var/lib/cloud/data/result.json (via temporary file /var/lib/cloud/data/tmps4347adq) - w: [644] 96 bytes/chars
2025-12-07 16:06:18,208 - util.py[DEBUG]: Creating symbolic link from '/run/cloud-init/result.json' => '../../var/lib/cloud/data/result.json'
2025-12-07 16:06:18,208 - util.py[DEBUG]: Reading from /proc/uptime (quiet=False)
2025-12-07 16:06:18,208 - util.py[DEBUG]: Read 13 bytes from /proc/uptime
2025-12-07 16:06:18,208 - util.py[DEBUG]: cloud-init mode 'modules' took 0.108 seconds (0.11)
2025-12-07 16:06:18,208 - handlers.py[DEBUG]: finish: modules-final: SUCCESS: running modules for final
2025-12-07 16:55:51,379 - util.py[DEBUG]: Cloud-init v. 22.4.2 running 'init-local' at Sun, 07 Dec 2025 16:55:51 +0000. Up 4.04 seconds.
2025-12-07 16:55:51,379 - main.py[DEBUG]: No kernel command line url found.
2025-12-07 16:55:51,379 - main.py[DEBUG]: Closing stdin.
2025-12-07 16:55:51,382 - util.py[DEBUG]: Writing to /var/log/cloud-init.log - ab: [644] 0 bytes
2025-12-07 16:55:51,382 - util.py[DEBUG]: Changing the ownership of /var/log/cloud-init.log to 0:4
2025-12-07 16:55:51,383 - util.py[DEBUG]: Attempting to remove /var/lib/cloud/instance/boot-finished
2025-12-07 16:55:51,383 - handlers.py[DEBUG]: start: init-local/check-cache: attempting to read from cache [check]
2025-12-07 16:55:51,383 - util.py[DEBUG]: Reading from /var/lib/cloud/instance/obj.pkl (quiet=False)
2025-12-07 16:55:51,384 - util.py[DEBUG]: Read 8298 bytes from /var/lib/cloud/instance/obj.pkl
2025-12-07 16:55:51,387 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud/meta-data (quiet=False)
2025-12-07 16:55:51,387 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud-net/meta-data (quiet=False)
2025-12-07 16:55:51,387 - stages.py[DEBUG]: cache invalid in datasource: DataSourceNoCloud [seed=/dev/sr0][dsmode=net]
2025-12-07 16:55:51,387 - handlers.py[DEBUG]: finish: init-local/check-cache: SUCCESS: cache invalid in datasource: DataSourceNoCloud [seed=/dev/sr0][dsmode=net]
2025-12-07 16:55:51,387 - util.py[DEBUG]: Attempting to remove /var/lib/cloud/instance
2025-12-07 16:55:51,389 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2025-12-07 16:55:51,390 - __init__.py[DEBUG]: Looking for data source in: ['NoCloud', 'None'], via packages ['', 'cloudinit.sources'] that matches dependencies ['FILESYSTEM']
2025-12-07 16:55:51,390 - __init__.py[DEBUG]: Searching for local data source in: ['DataSourceNoCloud']
2025-12-07 16:55:51,390 - handlers.py[DEBUG]: start: init-local/search-NoCloud: searching for local data from DataSourceNoCloud
2025-12-07 16:55:51,390 - __init__.py[DEBUG]: Seeing if we can get any data from <class 'cloudinit.sources.DataSourceNoCloud.DataSourceNoCloud'>
2025-12-07 16:55:51,391 - __init__.py[DEBUG]: Update datasource metadata and network config due to events: boot-new-instance
2025-12-07 16:55:51,391 - dmi.py[DEBUG]: querying dmi data /sys/class/dmi/id/product_serial
2025-12-07 16:55:51,391 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud/user-data (quiet=False)
2025-12-07 16:55:51,391 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud/meta-data (quiet=False)
2025-12-07 16:55:51,391 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud/vendor-data (quiet=False)
2025-12-07 16:55:51,391 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud/network-config (quiet=False)
2025-12-07 16:55:51,391 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud-net/user-data (quiet=False)
2025-12-07 16:55:51,391 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud-net/meta-data (quiet=False)
2025-12-07 16:55:51,391 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud-net/vendor-data (quiet=False)
2025-12-07 16:55:51,391 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud-net/network-config (quiet=False)
2025-12-07 16:55:51,391 - subp.py[DEBUG]: Running command ['blkid', '-tTYPE=vfat', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2025-12-07 16:55:51,482 - subp.py[DEBUG]: Running command ['blkid', '-tTYPE=iso9660', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2025-12-07 16:55:51,490 - subp.py[DEBUG]: Running command ['blkid', '-tLABEL=CIDATA', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2025-12-07 16:55:51,498 - subp.py[DEBUG]: Running command ['blkid', '-tLABEL=cidata', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2025-12-07 16:55:51,506 - subp.py[DEBUG]: Running command ['blkid', '-tLABEL_FATBOOT=cidata', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2025-12-07 16:55:51,514 - DataSourceNoCloud.py[DEBUG]: Attempting to use data from /dev/sr0
2025-12-07 16:55:51,515 - util.py[DEBUG]: Reading from /proc/mounts (quiet=False)
2025-12-07 16:55:51,515 - util.py[DEBUG]: Read 1938 bytes from /proc/mounts
2025-12-07 16:55:51,515 - util.py[DEBUG]: Fetched {'sysfs': {'fstype': 'sysfs', 'mountpoint': '/sys', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'proc': {'fstype': 'proc', 'mountpoint': '/proc', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'udev': {'fstype': 'devtmpfs', 'mountpoint': '/dev', 'opts': 'rw,nosuid,relatime,size=6118440k,nr_inodes=1529610,mode=755,inode64'}, 'devpts': {'fstype': 'devpts', 'mountpoint': '/dev/pts', 'opts': 'rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000'}, 'tmpfs': {'fstype': 'tmpfs', 'mountpoint': '/run/lock', 'opts': 'rw,nosuid,nodev,noexec,relatime,size=5120k,inode64'}, '/dev/sda1': {'fstype': 'ext4', 'mountpoint': '/', 'opts': 'rw,relatime,discard,errors=remount-ro'}, 'securityfs': {'fstype': 'securityfs', 'mountpoint': '/sys/kernel/security', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'cgroup2': {'fstype': 'cgroup2', 'mountpoint': '/sys/fs/cgroup', 'opts': 'rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot'}, 'pstore': {'fstype': 'pstore', 'mountpoint': '/sys/fs/pstore', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'bpf': {'fstype': 'bpf', 'mountpoint': '/sys/fs/bpf', 'opts': 'rw,nosuid,nodev,noexec,relatime,mode=700'}, 'systemd-1': {'fstype': 'autofs', 'mountpoint': '/proc/sys/fs/binfmt_misc', 'opts': 'rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=15632'}, 'hugetlbfs': {'fstype': 'hugetlbfs', 'mountpoint': '/dev/hugepages', 'opts': 'rw,relatime,pagesize=2M'}, 'mqueue': {'fstype': 'mqueue', 'mountpoint': '/dev/mqueue', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'debugfs': {'fstype': 'debugfs', 'mountpoint': '/sys/kernel/debug', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'tracefs': {'fstype': 'tracefs', 'mountpoint': '/sys/kernel/tracing', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'fusectl': {'fstype': 'fusectl', 'mountpoint': '/sys/fs/fuse/connections', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'configfs': {'fstype': 'configfs', 'mountpoint': '/sys/kernel/config', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'ramfs': {'fstype': 'ramfs', 'mountpoint': '/run/credentials/systemd-tmpfiles-setup.service', 'opts': 'ro,nosuid,nodev,noexec,relatime,mode=700'}, '/dev/sda15': {'fstype': 'vfat', 'mountpoint': '/boot/efi', 'opts': 'rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro'}} mounts from proc
2025-12-07 16:55:51,515 - subp.py[DEBUG]: Running command ['mount', '-o', 'ro', '-t', 'auto', '/dev/sr0', '/run/cloud-init/tmp/tmpkpzw0qyl'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 16:55:51,605 - util.py[DEBUG]: Reading from /run/cloud-init/tmp/tmpkpzw0qyl//user-data (quiet=False)
2025-12-07 16:55:51,606 - util.py[DEBUG]: Read 1714 bytes from /run/cloud-init/tmp/tmpkpzw0qyl//user-data
2025-12-07 16:55:51,606 - util.py[DEBUG]: Reading from /run/cloud-init/tmp/tmpkpzw0qyl//meta-data (quiet=False)
2025-12-07 16:55:51,607 - util.py[DEBUG]: Read 54 bytes from /run/cloud-init/tmp/tmpkpzw0qyl//meta-data
2025-12-07 16:55:51,607 - util.py[DEBUG]: Reading from /run/cloud-init/tmp/tmpkpzw0qyl//vendor-data (quiet=False)
2025-12-07 16:55:51,607 - util.py[DEBUG]: Read 0 bytes from /run/cloud-init/tmp/tmpkpzw0qyl//vendor-data
2025-12-07 16:55:51,607 - util.py[DEBUG]: Reading from /run/cloud-init/tmp/tmpkpzw0qyl//network-config (quiet=False)
2025-12-07 16:55:51,607 - util.py[DEBUG]: Read 455 bytes from /run/cloud-init/tmp/tmpkpzw0qyl//network-config
2025-12-07 16:55:51,607 - subp.py[DEBUG]: Running command ['umount', '/run/cloud-init/tmp/tmpkpzw0qyl'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 16:55:51,613 - util.py[DEBUG]: Attempting to load yaml from string of length 54 with allowed root types (<class 'dict'>,)
2025-12-07 16:55:51,614 - util.py[DEBUG]: Attempting to load yaml from string of length 455 with allowed root types (<class 'dict'>,)
2025-12-07 16:55:51,617 - DataSourceNoCloud.py[DEBUG]: Using data from /dev/sr0
2025-12-07 16:55:51,618 - util.py[DEBUG]: Reading from /etc/hosts (quiet=False)
2025-12-07 16:55:51,618 - util.py[DEBUG]: Read 565 bytes from /etc/hosts
2025-12-07 16:55:51,620 - util.py[DEBUG]: Writing to /run/cloud-init/cloud-id-nocloud - wb: [644] 8 bytes
2025-12-07 16:55:51,620 - util.py[DEBUG]: Creating symbolic link from '/run/cloud-init/cloud-id' => '/run/cloud-init/cloud-id-nocloud'
2025-12-07 16:55:51,621 - atomic_helper.py[DEBUG]: Atomically writing to file /run/cloud-init/instance-data-sensitive.json (via temporary file /run/cloud-init/tmplyqzunwb) - w: [600] 6783 bytes/chars
2025-12-07 16:55:51,622 - atomic_helper.py[DEBUG]: Atomically writing to file /run/cloud-init/instance-data.json (via temporary file /run/cloud-init/tmpxyne_hgb) - w: [644] 1521 bytes/chars
2025-12-07 16:55:51,622 - handlers.py[DEBUG]: finish: init-local/search-NoCloud: SUCCESS: found local data from DataSourceNoCloud
2025-12-07 16:55:51,622 - stages.py[INFO]: Loaded datasource DataSourceNoCloud - DataSourceNoCloud [seed=/dev/sr0][dsmode=net]
2025-12-07 16:55:51,622 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg (quiet=False)
2025-12-07 16:55:51,623 - util.py[DEBUG]: Read 2796 bytes from /etc/cloud/cloud.cfg
2025-12-07 16:55:51,623 - util.py[DEBUG]: Attempting to load yaml from string of length 2796 with allowed root types (<class 'dict'>,)
2025-12-07 16:55:51,637 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/99-ssh.cfg (quiet=False)
2025-12-07 16:55:51,637 - util.py[DEBUG]: Read 48 bytes from /etc/cloud/cloud.cfg.d/99-ssh.cfg
2025-12-07 16:55:51,638 - util.py[DEBUG]: Attempting to load yaml from string of length 48 with allowed root types (<class 'dict'>,)
2025-12-07 16:55:51,639 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/05_logging.cfg (quiet=False)
2025-12-07 16:55:51,639 - util.py[DEBUG]: Read 2070 bytes from /etc/cloud/cloud.cfg.d/05_logging.cfg
2025-12-07 16:55:51,639 - util.py[DEBUG]: Attempting to load yaml from string of length 2070 with allowed root types (<class 'dict'>,)
2025-12-07 16:55:51,644 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg (quiet=False)
2025-12-07 16:55:51,644 - util.py[DEBUG]: Read 309 bytes from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg
2025-12-07 16:55:51,644 - util.py[DEBUG]: Attempting to load yaml from string of length 309 with allowed root types (<class 'dict'>,)
2025-12-07 16:55:51,647 - util.py[DEBUG]: Reading from /run/cloud-init/cloud.cfg (quiet=False)
2025-12-07 16:55:51,647 - util.py[DEBUG]: Read 35 bytes from /run/cloud-init/cloud.cfg
2025-12-07 16:55:51,647 - util.py[DEBUG]: Attempting to load yaml from string of length 35 with allowed root types (<class 'dict'>,)
2025-12-07 16:55:51,648 - util.py[DEBUG]: Attempting to load yaml from string of length 0 with allowed root types (<class 'dict'>,)
2025-12-07 16:55:51,648 - util.py[DEBUG]: loaded blob returned None, returning default.
2025-12-07 16:55:51,649 - util.py[DEBUG]: Attempting to remove /var/lib/cloud/instance
2025-12-07 16:55:51,649 - util.py[DEBUG]: Creating symbolic link from '/var/lib/cloud/instance' => '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184'
2025-12-07 16:55:51,650 - util.py[DEBUG]: Reading from /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/datasource (quiet=False)
2025-12-07 16:55:51,651 - util.py[DEBUG]: Read 65 bytes from /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/datasource
2025-12-07 16:55:51,651 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/datasource - wb: [644] 65 bytes
2025-12-07 16:55:51,652 - util.py[DEBUG]: Writing to /var/lib/cloud/data/previous-datasource - wb: [644] 65 bytes
2025-12-07 16:55:51,652 - util.py[DEBUG]: Reading from /var/lib/cloud/data/instance-id (quiet=False)
2025-12-07 16:55:51,653 - util.py[DEBUG]: Read 41 bytes from /var/lib/cloud/data/instance-id
2025-12-07 16:55:51,653 - stages.py[DEBUG]: previous iid found to be 3a7b79c34864e435b2e39df1a836248be4942184
2025-12-07 16:55:51,653 - util.py[DEBUG]: Writing to /var/lib/cloud/data/instance-id - wb: [644] 41 bytes
2025-12-07 16:55:51,654 - util.py[DEBUG]: Writing to /run/cloud-init/.instance-id - wb: [644] 41 bytes
2025-12-07 16:55:51,654 - util.py[DEBUG]: Writing to /var/lib/cloud/data/previous-instance-id - wb: [644] 41 bytes
2025-12-07 16:55:51,655 - util.py[DEBUG]: Writing to /var/lib/cloud/instance/obj.pkl - wb: [400] 8298 bytes
2025-12-07 16:55:51,656 - main.py[DEBUG]: [local] init will now be targeting instance id: 3a7b79c34864e435b2e39df1a836248be4942184. new=False
2025-12-07 16:55:51,656 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg (quiet=False)
2025-12-07 16:55:51,656 - util.py[DEBUG]: Read 2796 bytes from /etc/cloud/cloud.cfg
2025-12-07 16:55:51,656 - util.py[DEBUG]: Attempting to load yaml from string of length 2796 with allowed root types (<class 'dict'>,)
2025-12-07 16:55:51,667 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/99-ssh.cfg (quiet=False)
2025-12-07 16:55:51,667 - util.py[DEBUG]: Read 48 bytes from /etc/cloud/cloud.cfg.d/99-ssh.cfg
2025-12-07 16:55:51,667 - util.py[DEBUG]: Attempting to load yaml from string of length 48 with allowed root types (<class 'dict'>,)
2025-12-07 16:55:51,667 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/05_logging.cfg (quiet=False)
2025-12-07 16:55:51,668 - util.py[DEBUG]: Read 2070 bytes from /etc/cloud/cloud.cfg.d/05_logging.cfg
2025-12-07 16:55:51,668 - util.py[DEBUG]: Attempting to load yaml from string of length 2070 with allowed root types (<class 'dict'>,)
2025-12-07 16:55:51,671 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg (quiet=False)
2025-12-07 16:55:51,671 - util.py[DEBUG]: Read 309 bytes from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg
2025-12-07 16:55:51,671 - util.py[DEBUG]: Attempting to load yaml from string of length 309 with allowed root types (<class 'dict'>,)
2025-12-07 16:55:51,675 - util.py[DEBUG]: Reading from /run/cloud-init/cloud.cfg (quiet=False)
2025-12-07 16:55:51,675 - util.py[DEBUG]: Read 35 bytes from /run/cloud-init/cloud.cfg
2025-12-07 16:55:51,675 - util.py[DEBUG]: Attempting to load yaml from string of length 35 with allowed root types (<class 'dict'>,)
2025-12-07 16:55:51,676 - util.py[DEBUG]: Attempting to load yaml from string of length 0 with allowed root types (<class 'dict'>,)
2025-12-07 16:55:51,676 - util.py[DEBUG]: loaded blob returned None, returning default.
2025-12-07 16:55:51,676 - util.py[DEBUG]: Reading from /var/lib/cloud/instance/cloud-config.txt (quiet=False)
2025-12-07 16:55:51,677 - util.py[DEBUG]: Read 1742 bytes from /var/lib/cloud/instance/cloud-config.txt
2025-12-07 16:55:51,677 - util.py[DEBUG]: Attempting to load yaml from string of length 1742 with allowed root types (<class 'dict'>,)
2025-12-07 16:55:51,683 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2025-12-07 16:55:51,684 - util.py[DEBUG]: Reading from /var/lib/cloud/data/set-hostname (quiet=False)
2025-12-07 16:55:51,684 - util.py[DEBUG]: Read 71 bytes from /var/lib/cloud/data/set-hostname
2025-12-07 16:55:51,684 - cc_set_hostname.py[DEBUG]: No hostname changes. Skipping set-hostname
2025-12-07 16:55:51,685 - util.py[DEBUG]: Reading from /sys/class/net/eth0/address (quiet=False)
2025-12-07 16:55:51,686 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/eth0/address
2025-12-07 16:55:51,686 - util.py[DEBUG]: Reading from /sys/class/net/lo/address (quiet=False)
2025-12-07 16:55:51,686 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/lo/address
2025-12-07 16:55:51,687 - stages.py[DEBUG]: Allowed events: {<EventScope.NETWORK: 'network'>: {<EventType.BOOT_NEW_INSTANCE: 'boot-new-instance'>}}
2025-12-07 16:55:51,687 - stages.py[DEBUG]: Event Denied: scopes=['network'] EventType=boot
2025-12-07 16:55:51,687 - stages.py[DEBUG]: Allowed events: {<EventScope.NETWORK: 'network'>: {<EventType.BOOT_NEW_INSTANCE: 'boot-new-instance'>}}
2025-12-07 16:55:51,687 - stages.py[DEBUG]: Event Denied: scopes=['network'] EventType=boot-legacy
2025-12-07 16:55:51,687 - stages.py[DEBUG]: No network config applied. Neither a new instance nor datasource network update allowed
2025-12-07 16:55:51,687 - stages.py[DEBUG]: applying net config names for {'version': 1, 'config': [{'type': 'physical', 'name': 'eth0', 'mac_address': '00:50:56:5e:95:7b', 'subnets': [{'type': 'static', 'address': '109.199.123.73', 'netmask': '255.255.240.0', 'gateway': '109.199.112.1'}, {'type': 'static6', 'address': '2a02:c207:2293:6396:0000:0000:0000:0001/64', 'gateway': 'fe80::1'}]}, {'type': 'nameserver', 'address': ['213.136.95.10', '213.136.95.11', '2a02:c207::1:53']}]}
2025-12-07 16:55:51,687 - util.py[DEBUG]: Reading from /sys/class/net/eth0/device/device (quiet=False)
2025-12-07 16:55:51,687 - util.py[DEBUG]: Read 7 bytes from /sys/class/net/eth0/device/device
2025-12-07 16:55:51,687 - util.py[DEBUG]: Reading from /sys/class/net/eth0/addr_assign_type (quiet=False)
2025-12-07 16:55:51,687 - util.py[DEBUG]: Read 2 bytes from /sys/class/net/eth0/addr_assign_type
2025-12-07 16:55:51,688 - util.py[DEBUG]: Reading from /sys/class/net/eth0/uevent (quiet=False)
2025-12-07 16:55:51,688 - util.py[DEBUG]: Read 25 bytes from /sys/class/net/eth0/uevent
2025-12-07 16:55:51,688 - util.py[DEBUG]: Reading from /sys/class/net/eth0/address (quiet=False)
2025-12-07 16:55:51,688 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/eth0/address
2025-12-07 16:55:51,688 - __init__.py[DEBUG]: ovs-vsctl not in PATH; not detecting Open vSwitch interfaces
2025-12-07 16:55:51,688 - util.py[DEBUG]: Reading from /sys/class/net/eth0/device/device (quiet=False)
2025-12-07 16:55:51,688 - util.py[DEBUG]: Read 7 bytes from /sys/class/net/eth0/device/device
2025-12-07 16:55:51,688 - util.py[DEBUG]: Reading from /sys/class/net/lo/addr_assign_type (quiet=False)
2025-12-07 16:55:51,688 - util.py[DEBUG]: Read 2 bytes from /sys/class/net/lo/addr_assign_type
2025-12-07 16:55:51,688 - util.py[DEBUG]: Reading from /sys/class/net/lo/uevent (quiet=False)
2025-12-07 16:55:51,688 - util.py[DEBUG]: Read 23 bytes from /sys/class/net/lo/uevent
2025-12-07 16:55:51,688 - util.py[DEBUG]: Reading from /sys/class/net/lo/address (quiet=False)
2025-12-07 16:55:51,689 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/lo/address
2025-12-07 16:55:51,689 - util.py[DEBUG]: Reading from /sys/class/net/lo/device/device (quiet=False)
2025-12-07 16:55:51,689 - util.py[DEBUG]: Reading from /sys/class/net/eth0/operstate (quiet=False)
2025-12-07 16:55:51,689 - util.py[DEBUG]: Read 5 bytes from /sys/class/net/eth0/operstate
2025-12-07 16:55:51,689 - util.py[DEBUG]: Reading from /sys/class/net/lo/operstate (quiet=False)
2025-12-07 16:55:51,689 - util.py[DEBUG]: Read 8 bytes from /sys/class/net/lo/operstate
2025-12-07 16:55:51,689 - subp.py[DEBUG]: Running command ['ip', '-6', 'addr', 'show', 'permanent', 'scope', 'global'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 16:55:51,702 - subp.py[DEBUG]: Running command ['ip', '-4', 'addr', 'show'] with allowed return codes [0] (shell=False, capture=True)
2025-12-07 16:55:51,707 - __init__.py[DEBUG]: Detected interfaces {'eth0': {'downable': True, 'device_id': '0x0001', 'driver': 'virtio_net', 'mac': '00:50:56:5e:95:7b', 'name': 'eth0', 'up': False}, 'lo': {'downable': False, 'device_id': None, 'driver': None, 'mac': '00:00:00:00:00:00', 'name': 'lo', 'up': True}}
2025-12-07 16:55:51,707 - __init__.py[DEBUG]: no work necessary for renaming of [['00:50:56:5e:95:7b', 'eth0', 'virtio_net', '0x0001']]
2025-12-07 16:55:51,707 - main.py[DEBUG]: [local] Exiting. datasource DataSourceNoCloud [seed=/dev/sr0][dsmode=net] not in local mode.
2025-12-07 16:55:51,708 - atomic_helper.py[DEBUG]: Atomically writing to file /var/lib/cloud/data/status.json (via temporary file /var/lib/cloud/data/tmpzou4rwt9) - w: [644] 518 bytes/chars
2025-12-07 16:55:51,708 - util.py[DEBUG]: Reading from /proc/uptime (quiet=False)
2025-12-07 16:55:51,708 - util.py[DEBUG]: Read 11 bytes from /proc/uptime
2025-12-07 16:55:51,708 - util.py[DEBUG]: cloud-init mode 'init' took 0.372 seconds (0.37)
2025-12-07 16:55:51,709 - handlers.py[DEBUG]: finish: init-local: SUCCESS: searching for local datasources
2025-12-07 16:56:05,743 - util.py[DEBUG]: Cloud-init v. 22.4.2 running 'modules:config' at Sun, 07 Dec 2025 16:56:05 +0000. Up 18.39 seconds.
2025-12-07 16:56:05,746 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:05,746 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:05,748 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:05,749 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:05,750 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:05,750 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:05,752 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:05,752 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:05,753 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:05,754 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:05,755 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:05,756 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:05,757 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:05,757 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:05,759 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:05,759 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:05,762 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:05,762 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:05,764 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:05,764 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:05,765 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:05,765 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:05,767 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:05,767 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:05,768 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:05,768 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:05,769 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2025-12-07 16:56:05,771 - modules.py[INFO]: Skipping modules 'snap,keyboard,apt-pipelining,ntp,disable-ec2-metadata,runcmd' because no applicable config is provided.
2025-12-07 16:56:05,771 - modules.py[DEBUG]: Running module ssh-import-id (<module 'cloudinit.config.cc_ssh_import_id' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_ssh_import_id.py'>) with frequency once-per-instance
2025-12-07 16:56:05,771 - handlers.py[DEBUG]: start: modules-config/config-ssh-import-id: running config-ssh-import-id with frequency once-per-instance
2025-12-07 16:56:05,772 - helpers.py[DEBUG]: config-ssh-import-id already ran (freq=once-per-instance)
2025-12-07 16:56:05,772 - handlers.py[DEBUG]: finish: modules-config/config-ssh-import-id: SUCCESS: config-ssh-import-id previously ran
2025-12-07 16:56:05,772 - modules.py[DEBUG]: Running module locale (<module 'cloudinit.config.cc_locale' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_locale.py'>) with frequency once-per-instance
2025-12-07 16:56:05,772 - handlers.py[DEBUG]: start: modules-config/config-locale: running config-locale with frequency once-per-instance
2025-12-07 16:56:05,772 - helpers.py[DEBUG]: config-locale already ran (freq=once-per-instance)
2025-12-07 16:56:05,772 - handlers.py[DEBUG]: finish: modules-config/config-locale: SUCCESS: config-locale previously ran
2025-12-07 16:56:05,772 - modules.py[DEBUG]: Running module set-passwords (<module 'cloudinit.config.cc_set_passwords' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_set_passwords.py'>) with frequency once-per-instance
2025-12-07 16:56:05,772 - handlers.py[DEBUG]: start: modules-config/config-set-passwords: running config-set-passwords with frequency once-per-instance
2025-12-07 16:56:05,772 - helpers.py[DEBUG]: config-set-passwords already ran (freq=once-per-instance)
2025-12-07 16:56:05,772 - handlers.py[DEBUG]: finish: modules-config/config-set-passwords: SUCCESS: config-set-passwords previously ran
2025-12-07 16:56:05,772 - modules.py[DEBUG]: Running module grub-dpkg (<module 'cloudinit.config.cc_grub_dpkg' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_grub_dpkg.py'>) with frequency once-per-instance
2025-12-07 16:56:05,772 - handlers.py[DEBUG]: start: modules-config/config-grub-dpkg: running config-grub-dpkg with frequency once-per-instance
2025-12-07 16:56:05,772 - helpers.py[DEBUG]: config-grub-dpkg already ran (freq=once-per-instance)
2025-12-07 16:56:05,772 - handlers.py[DEBUG]: finish: modules-config/config-grub-dpkg: SUCCESS: config-grub-dpkg previously ran
2025-12-07 16:56:05,772 - modules.py[DEBUG]: Running module apt-configure (<module 'cloudinit.config.cc_apt_configure' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_apt_configure.py'>) with frequency once-per-instance
2025-12-07 16:56:05,772 - handlers.py[DEBUG]: start: modules-config/config-apt-configure: running config-apt-configure with frequency once-per-instance
2025-12-07 16:56:05,772 - helpers.py[DEBUG]: config-apt-configure already ran (freq=once-per-instance)
2025-12-07 16:56:05,773 - handlers.py[DEBUG]: finish: modules-config/config-apt-configure: SUCCESS: config-apt-configure previously ran
2025-12-07 16:56:05,773 - modules.py[DEBUG]: Running module timezone (<module 'cloudinit.config.cc_timezone' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_timezone.py'>) with frequency once-per-instance
2025-12-07 16:56:05,773 - handlers.py[DEBUG]: start: modules-config/config-timezone: running config-timezone with frequency once-per-instance
2025-12-07 16:56:05,773 - helpers.py[DEBUG]: config-timezone already ran (freq=once-per-instance)
2025-12-07 16:56:05,773 - handlers.py[DEBUG]: finish: modules-config/config-timezone: SUCCESS: config-timezone previously ran
2025-12-07 16:56:05,773 - modules.py[DEBUG]: Running module byobu (<module 'cloudinit.config.cc_byobu' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_byobu.py'>) with frequency once-per-instance
2025-12-07 16:56:05,773 - handlers.py[DEBUG]: start: modules-config/config-byobu: running config-byobu with frequency once-per-instance
2025-12-07 16:56:05,773 - helpers.py[DEBUG]: config-byobu already ran (freq=once-per-instance)
2025-12-07 16:56:05,773 - handlers.py[DEBUG]: finish: modules-config/config-byobu: SUCCESS: config-byobu previously ran
2025-12-07 16:56:05,773 - main.py[DEBUG]: Ran 7 modules with 0 failures
2025-12-07 16:56:05,773 - atomic_helper.py[DEBUG]: Atomically writing to file /var/lib/cloud/data/status.json (via temporary file /var/lib/cloud/data/tmp27h75ejm) - w: [644] 546 bytes/chars
2025-12-07 16:56:05,773 - util.py[DEBUG]: Reading from /proc/uptime (quiet=False)
2025-12-07 16:56:05,774 - util.py[DEBUG]: Read 12 bytes from /proc/uptime
2025-12-07 16:56:05,774 - util.py[DEBUG]: cloud-init mode 'modules' took 0.103 seconds (0.11)
2025-12-07 16:56:05,774 - handlers.py[DEBUG]: finish: modules-config: SUCCESS: running modules for config
2025-12-07 16:56:06,117 - util.py[DEBUG]: Cloud-init v. 22.4.2 running 'modules:final' at Sun, 07 Dec 2025 16:56:06 +0000. Up 18.77 seconds.
2025-12-07 16:56:06,120 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,120 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,122 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,122 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,123 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,123 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,126 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,126 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,129 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,129 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,131 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,131 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,133 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,133 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,135 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,135 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,136 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,136 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,139 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,139 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,140 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,141 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,142 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,142 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,144 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,144 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,145 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,145 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,147 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,147 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,149 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,149 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,151 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,151 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,152 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,153 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,154 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,154 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,156 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,156 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,157 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2025-12-07 16:56:06,157 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2025-12-07 16:56:06,158 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2025-12-07 16:56:06,160 - modules.py[INFO]: Skipping modules 'fan,landscape,lxd,puppet,chef,mcollective,salt-minion,phone-home,power-state-change' because no applicable config is provided.
2025-12-07 16:56:06,161 - modules.py[DEBUG]: Running module package-update-upgrade-install (<module 'cloudinit.config.cc_package_update_upgrade_install' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_package_update_upgrade_install.py'>) with frequency once-per-instance
2025-12-07 16:56:06,161 - handlers.py[DEBUG]: start: modules-final/config-package-update-upgrade-install: running config-package-update-upgrade-install with frequency once-per-instance
2025-12-07 16:56:06,161 - helpers.py[DEBUG]: config-package-update-upgrade-install already ran (freq=once-per-instance)
2025-12-07 16:56:06,161 - handlers.py[DEBUG]: finish: modules-final/config-package-update-upgrade-install: SUCCESS: config-package-update-upgrade-install previously ran
2025-12-07 16:56:06,161 - modules.py[DEBUG]: Running module write-files-deferred (<module 'cloudinit.config.cc_write_files_deferred' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_write_files_deferred.py'>) with frequency once-per-instance
2025-12-07 16:56:06,161 - handlers.py[DEBUG]: start: modules-final/config-write-files-deferred: running config-write-files-deferred with frequency once-per-instance
2025-12-07 16:56:06,161 - helpers.py[DEBUG]: config-write-files-deferred already ran (freq=once-per-instance)
2025-12-07 16:56:06,161 - handlers.py[DEBUG]: finish: modules-final/config-write-files-deferred: SUCCESS: config-write-files-deferred previously ran
2025-12-07 16:56:06,161 - modules.py[DEBUG]: Running module reset_rmc (<module 'cloudinit.config.cc_reset_rmc' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_reset_rmc.py'>) with frequency once-per-instance
2025-12-07 16:56:06,161 - handlers.py[DEBUG]: start: modules-final/config-reset_rmc: running config-reset_rmc with frequency once-per-instance
2025-12-07 16:56:06,161 - helpers.py[DEBUG]: config-reset_rmc already ran (freq=once-per-instance)
2025-12-07 16:56:06,161 - handlers.py[DEBUG]: finish: modules-final/config-reset_rmc: SUCCESS: config-reset_rmc previously ran
2025-12-07 16:56:06,161 - modules.py[DEBUG]: Running module refresh_rmc_and_interface (<module 'cloudinit.config.cc_refresh_rmc_and_interface' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_refresh_rmc_and_interface.py'>) with frequency always
2025-12-07 16:56:06,162 - handlers.py[DEBUG]: start: modules-final/config-refresh_rmc_and_interface: running config-refresh_rmc_and_interface with frequency always
2025-12-07 16:56:06,162 - helpers.py[DEBUG]: Running config-refresh_rmc_and_interface using lock (<cloudinit.helpers.DummyLock object at 0x7fc995c076d0>)
2025-12-07 16:56:06,162 - cc_refresh_rmc_and_interface.py[DEBUG]: No 'rmcctrl' in path, disabled
2025-12-07 16:56:06,162 - handlers.py[DEBUG]: finish: modules-final/config-refresh_rmc_and_interface: SUCCESS: config-refresh_rmc_and_interface ran successfully
2025-12-07 16:56:06,162 - modules.py[DEBUG]: Running module rightscale_userdata (<module 'cloudinit.config.cc_rightscale_userdata' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_rightscale_userdata.py'>) with frequency once-per-instance
2025-12-07 16:56:06,162 - handlers.py[DEBUG]: start: modules-final/config-rightscale_userdata: running config-rightscale_userdata with frequency once-per-instance
2025-12-07 16:56:06,162 - helpers.py[DEBUG]: config-rightscale_userdata already ran (freq=once-per-instance)
2025-12-07 16:56:06,162 - handlers.py[DEBUG]: finish: modules-final/config-rightscale_userdata: SUCCESS: config-rightscale_userdata previously ran
2025-12-07 16:56:06,162 - modules.py[DEBUG]: Running module scripts-vendor (<module 'cloudinit.config.cc_scripts_vendor' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_vendor.py'>) with frequency once-per-instance
2025-12-07 16:56:06,162 - handlers.py[DEBUG]: start: modules-final/config-scripts-vendor: running config-scripts-vendor with frequency once-per-instance
2025-12-07 16:56:06,162 - helpers.py[DEBUG]: config-scripts-vendor already ran (freq=once-per-instance)
2025-12-07 16:56:06,162 - handlers.py[DEBUG]: finish: modules-final/config-scripts-vendor: SUCCESS: config-scripts-vendor previously ran
2025-12-07 16:56:06,162 - modules.py[DEBUG]: Running module scripts-per-once (<module 'cloudinit.config.cc_scripts_per_once' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_per_once.py'>) with frequency once
2025-12-07 16:56:06,162 - handlers.py[DEBUG]: start: modules-final/config-scripts-per-once: running config-scripts-per-once with frequency once
2025-12-07 16:56:06,163 - helpers.py[DEBUG]: config-scripts-per-once already ran (freq=once)
2025-12-07 16:56:06,163 - handlers.py[DEBUG]: finish: modules-final/config-scripts-per-once: SUCCESS: config-scripts-per-once previously ran
2025-12-07 16:56:06,163 - modules.py[DEBUG]: Running module scripts-per-boot (<module 'cloudinit.config.cc_scripts_per_boot' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_per_boot.py'>) with frequency always
2025-12-07 16:56:06,163 - handlers.py[DEBUG]: start: modules-final/config-scripts-per-boot: running config-scripts-per-boot with frequency always
2025-12-07 16:56:06,163 - helpers.py[DEBUG]: Running config-scripts-per-boot using lock (<cloudinit.helpers.DummyLock object at 0x7fc995c06210>)
2025-12-07 16:56:06,163 - handlers.py[DEBUG]: finish: modules-final/config-scripts-per-boot: SUCCESS: config-scripts-per-boot ran successfully
2025-12-07 16:56:06,163 - modules.py[DEBUG]: Running module scripts-per-instance (<module 'cloudinit.config.cc_scripts_per_instance' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_per_instance.py'>) with frequency once-per-instance
2025-12-07 16:56:06,163 - handlers.py[DEBUG]: start: modules-final/config-scripts-per-instance: running config-scripts-per-instance with frequency once-per-instance
2025-12-07 16:56:06,163 - helpers.py[DEBUG]: config-scripts-per-instance already ran (freq=once-per-instance)
2025-12-07 16:56:06,163 - handlers.py[DEBUG]: finish: modules-final/config-scripts-per-instance: SUCCESS: config-scripts-per-instance previously ran
2025-12-07 16:56:06,163 - modules.py[DEBUG]: Running module scripts-user (<module 'cloudinit.config.cc_scripts_user' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_user.py'>) with frequency once-per-instance
2025-12-07 16:56:06,164 - handlers.py[DEBUG]: start: modules-final/config-scripts-user: running config-scripts-user with frequency once-per-instance
2025-12-07 16:56:06,164 - helpers.py[DEBUG]: config-scripts-user already ran (freq=once-per-instance)
2025-12-07 16:56:06,164 - handlers.py[DEBUG]: finish: modules-final/config-scripts-user: SUCCESS: config-scripts-user previously ran
2025-12-07 16:56:06,164 - modules.py[DEBUG]: Running module ssh-authkey-fingerprints (<module 'cloudinit.config.cc_ssh_authkey_fingerprints' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_ssh_authkey_fingerprints.py'>) with frequency once-per-instance
2025-12-07 16:56:06,164 - handlers.py[DEBUG]: start: modules-final/config-ssh-authkey-fingerprints: running config-ssh-authkey-fingerprints with frequency once-per-instance
2025-12-07 16:56:06,164 - helpers.py[DEBUG]: config-ssh-authkey-fingerprints already ran (freq=once-per-instance)
2025-12-07 16:56:06,164 - handlers.py[DEBUG]: finish: modules-final/config-ssh-authkey-fingerprints: SUCCESS: config-ssh-authkey-fingerprints previously ran
2025-12-07 16:56:06,164 - modules.py[DEBUG]: Running module keys-to-console (<module 'cloudinit.config.cc_keys_to_console' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_keys_to_console.py'>) with frequency once-per-instance
2025-12-07 16:56:06,164 - handlers.py[DEBUG]: start: modules-final/config-keys-to-console: running config-keys-to-console with frequency once-per-instance
2025-12-07 16:56:06,164 - helpers.py[DEBUG]: config-keys-to-console already ran (freq=once-per-instance)
2025-12-07 16:56:06,164 - handlers.py[DEBUG]: finish: modules-final/config-keys-to-console: SUCCESS: config-keys-to-console previously ran
2025-12-07 16:56:06,164 - modules.py[DEBUG]: Running module install-hotplug (<module 'cloudinit.config.cc_install_hotplug' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_install_hotplug.py'>) with frequency once-per-instance
2025-12-07 16:56:06,164 - handlers.py[DEBUG]: start: modules-final/config-install-hotplug: running config-install-hotplug with frequency once-per-instance
2025-12-07 16:56:06,164 - helpers.py[DEBUG]: config-install-hotplug already ran (freq=once-per-instance)
2025-12-07 16:56:06,164 - handlers.py[DEBUG]: finish: modules-final/config-install-hotplug: SUCCESS: config-install-hotplug previously ran
2025-12-07 16:56:06,165 - modules.py[DEBUG]: Running module final-message (<module 'cloudinit.config.cc_final_message' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_final_message.py'>) with frequency always
2025-12-07 16:56:06,165 - handlers.py[DEBUG]: start: modules-final/config-final-message: running config-final-message with frequency always
2025-12-07 16:56:06,165 - helpers.py[DEBUG]: Running config-final-message using lock (<cloudinit.helpers.DummyLock object at 0x7fc995bfc0d0>)
2025-12-07 16:56:06,165 - util.py[DEBUG]: Reading from /proc/uptime (quiet=False)
2025-12-07 16:56:06,165 - util.py[DEBUG]: Read 12 bytes from /proc/uptime
2025-12-07 16:56:06,169 - util.py[DEBUG]: Cloud-init v. 22.4.2 finished at Sun, 07 Dec 2025 16:56:06 +0000. Datasource DataSourceNoCloud [seed=/dev/sr0][dsmode=net].  Up 18.85 seconds
2025-12-07 16:56:06,169 - util.py[DEBUG]: Writing to /var/lib/cloud/instance/boot-finished - wb: [644] 52 bytes
2025-12-07 16:56:06,169 - handlers.py[DEBUG]: finish: modules-final/config-final-message: SUCCESS: config-final-message ran successfully
2025-12-07 16:56:06,169 - main.py[DEBUG]: Ran 14 modules with 0 failures
2025-12-07 16:56:06,171 - atomic_helper.py[DEBUG]: Atomically writing to file /var/lib/cloud/data/status.json (via temporary file /var/lib/cloud/data/tmpdphmv7at) - w: [644] 574 bytes/chars
2025-12-07 16:56:06,171 - atomic_helper.py[DEBUG]: Atomically writing to file /var/lib/cloud/data/result.json (via temporary file /var/lib/cloud/data/tmp2qdc0ire) - w: [644] 96 bytes/chars
2025-12-07 16:56:06,172 - util.py[DEBUG]: Creating symbolic link from '/run/cloud-init/result.json' => '../../var/lib/cloud/data/result.json'
2025-12-07 16:56:06,172 - util.py[DEBUG]: Reading from /proc/uptime (quiet=False)
2025-12-07 16:56:06,172 - util.py[DEBUG]: Read 12 bytes from /proc/uptime
2025-12-07 16:56:06,172 - util.py[DEBUG]: cloud-init mode 'modules' took 0.111 seconds (0.11)
2025-12-07 16:56:06,172 - handlers.py[DEBUG]: finish: modules-final: SUCCESS: running modules for final
2026-01-13 22:24:47,630 - util.py[DEBUG]: Cloud-init v. 22.4.2 running 'init-local' at Tue, 13 Jan 2026 22:24:47 +0000. Up 4.43 seconds.
2026-01-13 22:24:47,631 - main.py[DEBUG]: No kernel command line url found.
2026-01-13 22:24:47,631 - main.py[DEBUG]: Closing stdin.
2026-01-13 22:24:47,632 - util.py[DEBUG]: Writing to /var/log/cloud-init.log - ab: [644] 0 bytes
2026-01-13 22:24:47,633 - util.py[DEBUG]: Changing the ownership of /var/log/cloud-init.log to 0:4
2026-01-13 22:24:47,634 - util.py[DEBUG]: Attempting to remove /var/lib/cloud/instance/boot-finished
2026-01-13 22:24:47,634 - handlers.py[DEBUG]: start: init-local/check-cache: attempting to read from cache [check]
2026-01-13 22:24:47,634 - util.py[DEBUG]: Reading from /var/lib/cloud/instance/obj.pkl (quiet=False)
2026-01-13 22:24:47,635 - util.py[DEBUG]: Read 8298 bytes from /var/lib/cloud/instance/obj.pkl
2026-01-13 22:24:47,638 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud/meta-data (quiet=False)
2026-01-13 22:24:47,639 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud-net/meta-data (quiet=False)
2026-01-13 22:24:47,639 - stages.py[DEBUG]: cache invalid in datasource: DataSourceNoCloud [seed=/dev/sr0][dsmode=net]
2026-01-13 22:24:47,639 - handlers.py[DEBUG]: finish: init-local/check-cache: SUCCESS: cache invalid in datasource: DataSourceNoCloud [seed=/dev/sr0][dsmode=net]
2026-01-13 22:24:47,639 - util.py[DEBUG]: Attempting to remove /var/lib/cloud/instance
2026-01-13 22:24:47,642 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2026-01-13 22:24:47,642 - __init__.py[DEBUG]: Looking for data source in: ['NoCloud', 'None'], via packages ['', 'cloudinit.sources'] that matches dependencies ['FILESYSTEM']
2026-01-13 22:24:47,643 - __init__.py[DEBUG]: Searching for local data source in: ['DataSourceNoCloud']
2026-01-13 22:24:47,643 - handlers.py[DEBUG]: start: init-local/search-NoCloud: searching for local data from DataSourceNoCloud
2026-01-13 22:24:47,643 - __init__.py[DEBUG]: Seeing if we can get any data from <class 'cloudinit.sources.DataSourceNoCloud.DataSourceNoCloud'>
2026-01-13 22:24:47,643 - __init__.py[DEBUG]: Update datasource metadata and network config due to events: boot-new-instance
2026-01-13 22:24:47,643 - dmi.py[DEBUG]: querying dmi data /sys/class/dmi/id/product_serial
2026-01-13 22:24:47,643 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud/user-data (quiet=False)
2026-01-13 22:24:47,643 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud/meta-data (quiet=False)
2026-01-13 22:24:47,643 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud/vendor-data (quiet=False)
2026-01-13 22:24:47,643 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud/network-config (quiet=False)
2026-01-13 22:24:47,643 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud-net/user-data (quiet=False)
2026-01-13 22:24:47,644 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud-net/meta-data (quiet=False)
2026-01-13 22:24:47,644 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud-net/vendor-data (quiet=False)
2026-01-13 22:24:47,644 - util.py[DEBUG]: Reading from /var/lib/cloud/seed/nocloud-net/network-config (quiet=False)
2026-01-13 22:24:47,644 - subp.py[DEBUG]: Running command ['blkid', '-tTYPE=vfat', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2026-01-13 22:24:47,748 - subp.py[DEBUG]: Running command ['blkid', '-tTYPE=iso9660', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2026-01-13 22:24:47,757 - subp.py[DEBUG]: Running command ['blkid', '-tLABEL=CIDATA', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2026-01-13 22:24:47,766 - subp.py[DEBUG]: Running command ['blkid', '-tLABEL=cidata', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2026-01-13 22:24:47,776 - subp.py[DEBUG]: Running command ['blkid', '-tLABEL_FATBOOT=cidata', '-odevice'] with allowed return codes [0, 2] (shell=False, capture=True)
2026-01-13 22:24:47,783 - DataSourceNoCloud.py[DEBUG]: Attempting to use data from /dev/sr0
2026-01-13 22:24:47,784 - util.py[DEBUG]: Reading from /proc/mounts (quiet=False)
2026-01-13 22:24:47,784 - util.py[DEBUG]: Read 2023 bytes from /proc/mounts
2026-01-13 22:24:47,784 - util.py[DEBUG]: Fetched {'sysfs': {'fstype': 'sysfs', 'mountpoint': '/sys', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'proc': {'fstype': 'proc', 'mountpoint': '/proc', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'udev': {'fstype': 'devtmpfs', 'mountpoint': '/dev', 'opts': 'rw,nosuid,relatime,size=6118004k,nr_inodes=1529501,mode=755,inode64'}, 'devpts': {'fstype': 'devpts', 'mountpoint': '/dev/pts', 'opts': 'rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000'}, 'tmpfs': {'fstype': 'tmpfs', 'mountpoint': '/run/lock', 'opts': 'rw,nosuid,nodev,noexec,relatime,size=5120k,inode64'}, '/dev/sda1': {'fstype': 'ext4', 'mountpoint': '/', 'opts': 'rw,relatime,discard,errors=remount-ro'}, 'securityfs': {'fstype': 'securityfs', 'mountpoint': '/sys/kernel/security', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'cgroup2': {'fstype': 'cgroup2', 'mountpoint': '/sys/fs/cgroup', 'opts': 'rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot'}, 'pstore': {'fstype': 'pstore', 'mountpoint': '/sys/fs/pstore', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'bpf': {'fstype': 'bpf', 'mountpoint': '/sys/fs/bpf', 'opts': 'rw,nosuid,nodev,noexec,relatime,mode=700'}, 'systemd-1': {'fstype': 'autofs', 'mountpoint': '/proc/sys/fs/binfmt_misc', 'opts': 'rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=15639'}, 'hugetlbfs': {'fstype': 'hugetlbfs', 'mountpoint': '/dev/hugepages', 'opts': 'rw,relatime,pagesize=2M'}, 'mqueue': {'fstype': 'mqueue', 'mountpoint': '/dev/mqueue', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'debugfs': {'fstype': 'debugfs', 'mountpoint': '/sys/kernel/debug', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'tracefs': {'fstype': 'tracefs', 'mountpoint': '/sys/kernel/tracing', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'fusectl': {'fstype': 'fusectl', 'mountpoint': '/sys/fs/fuse/connections', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'configfs': {'fstype': 'configfs', 'mountpoint': '/sys/kernel/config', 'opts': 'rw,nosuid,nodev,noexec,relatime'}, 'ramfs': {'fstype': 'ramfs', 'mountpoint': '/run/credentials/systemd-tmpfiles-setup.service', 'opts': 'ro,nosuid,nodev,noexec,relatime,mode=700'}, '/dev/sda15': {'fstype': 'vfat', 'mountpoint': '/boot/efi', 'opts': 'rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro'}, 'binfmt_misc': {'fstype': 'binfmt_misc', 'mountpoint': '/proc/sys/fs/binfmt_misc', 'opts': 'rw,nosuid,nodev,noexec,relatime'}} mounts from proc
2026-01-13 22:24:47,784 - subp.py[DEBUG]: Running command ['mount', '-o', 'ro', '-t', 'auto', '/dev/sr0', '/run/cloud-init/tmp/tmpsmdbbtp0'] with allowed return codes [0] (shell=False, capture=True)
2026-01-13 22:24:47,874 - util.py[DEBUG]: Reading from /run/cloud-init/tmp/tmpsmdbbtp0//user-data (quiet=False)
2026-01-13 22:24:47,875 - util.py[DEBUG]: Read 1714 bytes from /run/cloud-init/tmp/tmpsmdbbtp0//user-data
2026-01-13 22:24:47,875 - util.py[DEBUG]: Reading from /run/cloud-init/tmp/tmpsmdbbtp0//meta-data (quiet=False)
2026-01-13 22:24:47,876 - util.py[DEBUG]: Read 54 bytes from /run/cloud-init/tmp/tmpsmdbbtp0//meta-data
2026-01-13 22:24:47,876 - util.py[DEBUG]: Reading from /run/cloud-init/tmp/tmpsmdbbtp0//vendor-data (quiet=False)
2026-01-13 22:24:47,876 - util.py[DEBUG]: Read 0 bytes from /run/cloud-init/tmp/tmpsmdbbtp0//vendor-data
2026-01-13 22:24:47,876 - util.py[DEBUG]: Reading from /run/cloud-init/tmp/tmpsmdbbtp0//network-config (quiet=False)
2026-01-13 22:24:47,877 - util.py[DEBUG]: Read 455 bytes from /run/cloud-init/tmp/tmpsmdbbtp0//network-config
2026-01-13 22:24:47,877 - subp.py[DEBUG]: Running command ['umount', '/run/cloud-init/tmp/tmpsmdbbtp0'] with allowed return codes [0] (shell=False, capture=True)
2026-01-13 22:24:47,881 - util.py[DEBUG]: Attempting to load yaml from string of length 54 with allowed root types (<class 'dict'>,)
2026-01-13 22:24:47,883 - util.py[DEBUG]: Attempting to load yaml from string of length 455 with allowed root types (<class 'dict'>,)
2026-01-13 22:24:47,886 - DataSourceNoCloud.py[DEBUG]: Using data from /dev/sr0
2026-01-13 22:24:47,886 - util.py[DEBUG]: Reading from /etc/hosts (quiet=False)
2026-01-13 22:24:47,886 - util.py[DEBUG]: Read 565 bytes from /etc/hosts
2026-01-13 22:24:47,887 - util.py[DEBUG]: Writing to /run/cloud-init/cloud-id-nocloud - wb: [644] 8 bytes
2026-01-13 22:24:47,888 - util.py[DEBUG]: Creating symbolic link from '/run/cloud-init/cloud-id' => '/run/cloud-init/cloud-id-nocloud'
2026-01-13 22:24:47,888 - atomic_helper.py[DEBUG]: Atomically writing to file /run/cloud-init/instance-data-sensitive.json (via temporary file /run/cloud-init/tmppnhk3iou) - w: [600] 6783 bytes/chars
2026-01-13 22:24:47,889 - atomic_helper.py[DEBUG]: Atomically writing to file /run/cloud-init/instance-data.json (via temporary file /run/cloud-init/tmp2z0948xc) - w: [644] 1521 bytes/chars
2026-01-13 22:24:47,889 - handlers.py[DEBUG]: finish: init-local/search-NoCloud: SUCCESS: found local data from DataSourceNoCloud
2026-01-13 22:24:47,890 - stages.py[INFO]: Loaded datasource DataSourceNoCloud - DataSourceNoCloud [seed=/dev/sr0][dsmode=net]
2026-01-13 22:24:47,890 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg (quiet=False)
2026-01-13 22:24:47,890 - util.py[DEBUG]: Read 2796 bytes from /etc/cloud/cloud.cfg
2026-01-13 22:24:47,890 - util.py[DEBUG]: Attempting to load yaml from string of length 2796 with allowed root types (<class 'dict'>,)
2026-01-13 22:24:47,903 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/99-ssh.cfg (quiet=False)
2026-01-13 22:24:47,903 - util.py[DEBUG]: Read 48 bytes from /etc/cloud/cloud.cfg.d/99-ssh.cfg
2026-01-13 22:24:47,903 - util.py[DEBUG]: Attempting to load yaml from string of length 48 with allowed root types (<class 'dict'>,)
2026-01-13 22:24:47,904 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/05_logging.cfg (quiet=False)
2026-01-13 22:24:47,904 - util.py[DEBUG]: Read 2070 bytes from /etc/cloud/cloud.cfg.d/05_logging.cfg
2026-01-13 22:24:47,904 - util.py[DEBUG]: Attempting to load yaml from string of length 2070 with allowed root types (<class 'dict'>,)
2026-01-13 22:24:47,907 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg (quiet=False)
2026-01-13 22:24:47,908 - util.py[DEBUG]: Read 309 bytes from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg
2026-01-13 22:24:47,908 - util.py[DEBUG]: Attempting to load yaml from string of length 309 with allowed root types (<class 'dict'>,)
2026-01-13 22:24:47,911 - util.py[DEBUG]: Reading from /run/cloud-init/cloud.cfg (quiet=False)
2026-01-13 22:24:47,912 - util.py[DEBUG]: Read 35 bytes from /run/cloud-init/cloud.cfg
2026-01-13 22:24:47,912 - util.py[DEBUG]: Attempting to load yaml from string of length 35 with allowed root types (<class 'dict'>,)
2026-01-13 22:24:47,913 - util.py[DEBUG]: Attempting to load yaml from string of length 0 with allowed root types (<class 'dict'>,)
2026-01-13 22:24:47,913 - util.py[DEBUG]: loaded blob returned None, returning default.
2026-01-13 22:24:47,914 - util.py[DEBUG]: Attempting to remove /var/lib/cloud/instance
2026-01-13 22:24:47,914 - util.py[DEBUG]: Creating symbolic link from '/var/lib/cloud/instance' => '/var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184'
2026-01-13 22:24:47,916 - util.py[DEBUG]: Reading from /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/datasource (quiet=False)
2026-01-13 22:24:47,917 - util.py[DEBUG]: Read 65 bytes from /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/datasource
2026-01-13 22:24:47,917 - util.py[DEBUG]: Writing to /var/lib/cloud/instances/3a7b79c34864e435b2e39df1a836248be4942184/datasource - wb: [644] 65 bytes
2026-01-13 22:24:47,918 - util.py[DEBUG]: Writing to /var/lib/cloud/data/previous-datasource - wb: [644] 65 bytes
2026-01-13 22:24:47,918 - util.py[DEBUG]: Reading from /var/lib/cloud/data/instance-id (quiet=False)
2026-01-13 22:24:47,919 - util.py[DEBUG]: Read 41 bytes from /var/lib/cloud/data/instance-id
2026-01-13 22:24:47,919 - stages.py[DEBUG]: previous iid found to be 3a7b79c34864e435b2e39df1a836248be4942184
2026-01-13 22:24:47,919 - util.py[DEBUG]: Writing to /var/lib/cloud/data/instance-id - wb: [644] 41 bytes
2026-01-13 22:24:47,920 - util.py[DEBUG]: Writing to /run/cloud-init/.instance-id - wb: [644] 41 bytes
2026-01-13 22:24:47,920 - util.py[DEBUG]: Writing to /var/lib/cloud/data/previous-instance-id - wb: [644] 41 bytes
2026-01-13 22:24:47,921 - util.py[DEBUG]: Writing to /var/lib/cloud/instance/obj.pkl - wb: [400] 8298 bytes
2026-01-13 22:24:47,922 - main.py[DEBUG]: [local] init will now be targeting instance id: 3a7b79c34864e435b2e39df1a836248be4942184. new=False
2026-01-13 22:24:47,922 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg (quiet=False)
2026-01-13 22:24:47,922 - util.py[DEBUG]: Read 2796 bytes from /etc/cloud/cloud.cfg
2026-01-13 22:24:47,922 - util.py[DEBUG]: Attempting to load yaml from string of length 2796 with allowed root types (<class 'dict'>,)
2026-01-13 22:24:47,935 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/99-ssh.cfg (quiet=False)
2026-01-13 22:24:47,935 - util.py[DEBUG]: Read 48 bytes from /etc/cloud/cloud.cfg.d/99-ssh.cfg
2026-01-13 22:24:47,935 - util.py[DEBUG]: Attempting to load yaml from string of length 48 with allowed root types (<class 'dict'>,)
2026-01-13 22:24:47,936 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/05_logging.cfg (quiet=False)
2026-01-13 22:24:47,936 - util.py[DEBUG]: Read 2070 bytes from /etc/cloud/cloud.cfg.d/05_logging.cfg
2026-01-13 22:24:47,936 - util.py[DEBUG]: Attempting to load yaml from string of length 2070 with allowed root types (<class 'dict'>,)
2026-01-13 22:24:47,940 - util.py[DEBUG]: Reading from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg (quiet=False)
2026-01-13 22:24:47,940 - util.py[DEBUG]: Read 309 bytes from /etc/cloud/cloud.cfg.d/01_debian_cloud.cfg
2026-01-13 22:24:47,940 - util.py[DEBUG]: Attempting to load yaml from string of length 309 with allowed root types (<class 'dict'>,)
2026-01-13 22:24:47,943 - util.py[DEBUG]: Reading from /run/cloud-init/cloud.cfg (quiet=False)
2026-01-13 22:24:47,943 - util.py[DEBUG]: Read 35 bytes from /run/cloud-init/cloud.cfg
2026-01-13 22:24:47,943 - util.py[DEBUG]: Attempting to load yaml from string of length 35 with allowed root types (<class 'dict'>,)
2026-01-13 22:24:47,943 - util.py[DEBUG]: Attempting to load yaml from string of length 0 with allowed root types (<class 'dict'>,)
2026-01-13 22:24:47,944 - util.py[DEBUG]: loaded blob returned None, returning default.
2026-01-13 22:24:47,944 - util.py[DEBUG]: Reading from /var/lib/cloud/instance/cloud-config.txt (quiet=False)
2026-01-13 22:24:47,944 - util.py[DEBUG]: Read 1742 bytes from /var/lib/cloud/instance/cloud-config.txt
2026-01-13 22:24:47,944 - util.py[DEBUG]: Attempting to load yaml from string of length 1742 with allowed root types (<class 'dict'>,)
2026-01-13 22:24:47,948 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2026-01-13 22:24:47,949 - util.py[DEBUG]: Reading from /var/lib/cloud/data/set-hostname (quiet=False)
2026-01-13 22:24:47,949 - util.py[DEBUG]: Read 71 bytes from /var/lib/cloud/data/set-hostname
2026-01-13 22:24:47,950 - cc_set_hostname.py[DEBUG]: No hostname changes. Skipping set-hostname
2026-01-13 22:24:47,950 - util.py[DEBUG]: Reading from /sys/class/net/eth0/address (quiet=False)
2026-01-13 22:24:47,951 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/eth0/address
2026-01-13 22:24:47,951 - util.py[DEBUG]: Reading from /sys/class/net/lo/address (quiet=False)
2026-01-13 22:24:47,951 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/lo/address
2026-01-13 22:24:47,952 - stages.py[DEBUG]: Allowed events: {<EventScope.NETWORK: 'network'>: {<EventType.BOOT_NEW_INSTANCE: 'boot-new-instance'>}}
2026-01-13 22:24:47,952 - stages.py[DEBUG]: Event Denied: scopes=['network'] EventType=boot
2026-01-13 22:24:47,952 - stages.py[DEBUG]: Allowed events: {<EventScope.NETWORK: 'network'>: {<EventType.BOOT_NEW_INSTANCE: 'boot-new-instance'>}}
2026-01-13 22:24:47,952 - stages.py[DEBUG]: Event Denied: scopes=['network'] EventType=boot-legacy
2026-01-13 22:24:47,952 - stages.py[DEBUG]: No network config applied. Neither a new instance nor datasource network update allowed
2026-01-13 22:24:47,952 - stages.py[DEBUG]: applying net config names for {'version': 1, 'config': [{'type': 'physical', 'name': 'eth0', 'mac_address': '00:50:56:5e:95:7b', 'subnets': [{'type': 'static', 'address': '109.199.123.73', 'netmask': '255.255.240.0', 'gateway': '109.199.112.1'}, {'type': 'static6', 'address': '2a02:c207:2293:6396:0000:0000:0000:0001/64', 'gateway': 'fe80::1'}]}, {'type': 'nameserver', 'address': ['213.136.95.10', '213.136.95.11', '2a02:c207::1:53']}]}
2026-01-13 22:24:47,953 - util.py[DEBUG]: Reading from /sys/class/net/eth0/device/device (quiet=False)
2026-01-13 22:24:47,953 - util.py[DEBUG]: Read 7 bytes from /sys/class/net/eth0/device/device
2026-01-13 22:24:47,953 - util.py[DEBUG]: Reading from /sys/class/net/eth0/addr_assign_type (quiet=False)
2026-01-13 22:24:47,953 - util.py[DEBUG]: Read 2 bytes from /sys/class/net/eth0/addr_assign_type
2026-01-13 22:24:47,953 - util.py[DEBUG]: Reading from /sys/class/net/eth0/uevent (quiet=False)
2026-01-13 22:24:47,953 - util.py[DEBUG]: Read 25 bytes from /sys/class/net/eth0/uevent
2026-01-13 22:24:47,953 - util.py[DEBUG]: Reading from /sys/class/net/eth0/address (quiet=False)
2026-01-13 22:24:47,953 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/eth0/address
2026-01-13 22:24:47,954 - __init__.py[DEBUG]: ovs-vsctl not in PATH; not detecting Open vSwitch interfaces
2026-01-13 22:24:47,954 - util.py[DEBUG]: Reading from /sys/class/net/eth0/device/device (quiet=False)
2026-01-13 22:24:47,954 - util.py[DEBUG]: Read 7 bytes from /sys/class/net/eth0/device/device
2026-01-13 22:24:47,954 - util.py[DEBUG]: Reading from /sys/class/net/lo/addr_assign_type (quiet=False)
2026-01-13 22:24:47,954 - util.py[DEBUG]: Read 2 bytes from /sys/class/net/lo/addr_assign_type
2026-01-13 22:24:47,954 - util.py[DEBUG]: Reading from /sys/class/net/lo/uevent (quiet=False)
2026-01-13 22:24:47,954 - util.py[DEBUG]: Read 23 bytes from /sys/class/net/lo/uevent
2026-01-13 22:24:47,954 - util.py[DEBUG]: Reading from /sys/class/net/lo/address (quiet=False)
2026-01-13 22:24:47,954 - util.py[DEBUG]: Read 18 bytes from /sys/class/net/lo/address
2026-01-13 22:24:47,954 - util.py[DEBUG]: Reading from /sys/class/net/lo/device/device (quiet=False)
2026-01-13 22:24:47,955 - util.py[DEBUG]: Reading from /sys/class/net/eth0/operstate (quiet=False)
2026-01-13 22:24:47,955 - util.py[DEBUG]: Read 5 bytes from /sys/class/net/eth0/operstate
2026-01-13 22:24:47,955 - util.py[DEBUG]: Reading from /sys/class/net/lo/operstate (quiet=False)
2026-01-13 22:24:47,955 - util.py[DEBUG]: Read 8 bytes from /sys/class/net/lo/operstate
2026-01-13 22:24:47,955 - subp.py[DEBUG]: Running command ['ip', '-6', 'addr', 'show', 'permanent', 'scope', 'global'] with allowed return codes [0] (shell=False, capture=True)
2026-01-13 22:24:47,979 - subp.py[DEBUG]: Running command ['ip', '-4', 'addr', 'show'] with allowed return codes [0] (shell=False, capture=True)
2026-01-13 22:24:47,985 - __init__.py[DEBUG]: Detected interfaces {'eth0': {'downable': True, 'device_id': '0x0001', 'driver': 'virtio_net', 'mac': '00:50:56:5e:95:7b', 'name': 'eth0', 'up': False}, 'lo': {'downable': False, 'device_id': None, 'driver': None, 'mac': '00:00:00:00:00:00', 'name': 'lo', 'up': True}}
2026-01-13 22:24:47,985 - __init__.py[DEBUG]: no work necessary for renaming of [['00:50:56:5e:95:7b', 'eth0', 'virtio_net', '0x0001']]
2026-01-13 22:24:47,985 - main.py[DEBUG]: [local] Exiting. datasource DataSourceNoCloud [seed=/dev/sr0][dsmode=net] not in local mode.
2026-01-13 22:24:47,986 - atomic_helper.py[DEBUG]: Atomically writing to file /var/lib/cloud/data/status.json (via temporary file /var/lib/cloud/data/tmpadvbkoqq) - w: [644] 517 bytes/chars
2026-01-13 22:24:47,986 - util.py[DEBUG]: Reading from /proc/uptime (quiet=False)
2026-01-13 22:24:47,987 - util.py[DEBUG]: Read 11 bytes from /proc/uptime
2026-01-13 22:24:47,987 - util.py[DEBUG]: cloud-init mode 'init' took 0.406 seconds (0.41)
2026-01-13 22:24:47,987 - handlers.py[DEBUG]: finish: init-local: SUCCESS: searching for local datasources
2026-01-13 22:25:02,113 - util.py[DEBUG]: Cloud-init v. 22.4.2 running 'modules:config' at Tue, 13 Jan 2026 22:25:02 +0000. Up 18.90 seconds.
2026-01-13 22:25:02,116 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,116 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,121 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,121 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,124 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,124 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,127 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,127 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,129 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,129 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,132 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,132 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,135 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,135 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,139 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,139 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,143 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,143 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,145 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,146 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,148 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,149 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,151 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,151 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,153 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,153 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,155 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2026-01-13 22:25:02,157 - modules.py[INFO]: Skipping modules 'snap,keyboard,apt-pipelining,ntp,disable-ec2-metadata,runcmd' because no applicable config is provided.
2026-01-13 22:25:02,157 - modules.py[DEBUG]: Running module ssh-import-id (<module 'cloudinit.config.cc_ssh_import_id' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_ssh_import_id.py'>) with frequency once-per-instance
2026-01-13 22:25:02,158 - handlers.py[DEBUG]: start: modules-config/config-ssh-import-id: running config-ssh-import-id with frequency once-per-instance
2026-01-13 22:25:02,158 - helpers.py[DEBUG]: config-ssh-import-id already ran (freq=once-per-instance)
2026-01-13 22:25:02,158 - handlers.py[DEBUG]: finish: modules-config/config-ssh-import-id: SUCCESS: config-ssh-import-id previously ran
2026-01-13 22:25:02,158 - modules.py[DEBUG]: Running module locale (<module 'cloudinit.config.cc_locale' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_locale.py'>) with frequency once-per-instance
2026-01-13 22:25:02,159 - handlers.py[DEBUG]: start: modules-config/config-locale: running config-locale with frequency once-per-instance
2026-01-13 22:25:02,159 - helpers.py[DEBUG]: config-locale already ran (freq=once-per-instance)
2026-01-13 22:25:02,159 - handlers.py[DEBUG]: finish: modules-config/config-locale: SUCCESS: config-locale previously ran
2026-01-13 22:25:02,159 - modules.py[DEBUG]: Running module set-passwords (<module 'cloudinit.config.cc_set_passwords' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_set_passwords.py'>) with frequency once-per-instance
2026-01-13 22:25:02,159 - handlers.py[DEBUG]: start: modules-config/config-set-passwords: running config-set-passwords with frequency once-per-instance
2026-01-13 22:25:02,159 - helpers.py[DEBUG]: config-set-passwords already ran (freq=once-per-instance)
2026-01-13 22:25:02,159 - handlers.py[DEBUG]: finish: modules-config/config-set-passwords: SUCCESS: config-set-passwords previously ran
2026-01-13 22:25:02,159 - modules.py[DEBUG]: Running module grub-dpkg (<module 'cloudinit.config.cc_grub_dpkg' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_grub_dpkg.py'>) with frequency once-per-instance
2026-01-13 22:25:02,159 - handlers.py[DEBUG]: start: modules-config/config-grub-dpkg: running config-grub-dpkg with frequency once-per-instance
2026-01-13 22:25:02,159 - helpers.py[DEBUG]: config-grub-dpkg already ran (freq=once-per-instance)
2026-01-13 22:25:02,160 - handlers.py[DEBUG]: finish: modules-config/config-grub-dpkg: SUCCESS: config-grub-dpkg previously ran
2026-01-13 22:25:02,160 - modules.py[DEBUG]: Running module apt-configure (<module 'cloudinit.config.cc_apt_configure' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_apt_configure.py'>) with frequency once-per-instance
2026-01-13 22:25:02,160 - handlers.py[DEBUG]: start: modules-config/config-apt-configure: running config-apt-configure with frequency once-per-instance
2026-01-13 22:25:02,160 - helpers.py[DEBUG]: config-apt-configure already ran (freq=once-per-instance)
2026-01-13 22:25:02,160 - handlers.py[DEBUG]: finish: modules-config/config-apt-configure: SUCCESS: config-apt-configure previously ran
2026-01-13 22:25:02,160 - modules.py[DEBUG]: Running module timezone (<module 'cloudinit.config.cc_timezone' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_timezone.py'>) with frequency once-per-instance
2026-01-13 22:25:02,160 - handlers.py[DEBUG]: start: modules-config/config-timezone: running config-timezone with frequency once-per-instance
2026-01-13 22:25:02,160 - helpers.py[DEBUG]: config-timezone already ran (freq=once-per-instance)
2026-01-13 22:25:02,160 - handlers.py[DEBUG]: finish: modules-config/config-timezone: SUCCESS: config-timezone previously ran
2026-01-13 22:25:02,160 - modules.py[DEBUG]: Running module byobu (<module 'cloudinit.config.cc_byobu' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_byobu.py'>) with frequency once-per-instance
2026-01-13 22:25:02,161 - handlers.py[DEBUG]: start: modules-config/config-byobu: running config-byobu with frequency once-per-instance
2026-01-13 22:25:02,161 - helpers.py[DEBUG]: config-byobu already ran (freq=once-per-instance)
2026-01-13 22:25:02,161 - handlers.py[DEBUG]: finish: modules-config/config-byobu: SUCCESS: config-byobu previously ran
2026-01-13 22:25:02,161 - main.py[DEBUG]: Ran 7 modules with 0 failures
2026-01-13 22:25:02,161 - atomic_helper.py[DEBUG]: Atomically writing to file /var/lib/cloud/data/status.json (via temporary file /var/lib/cloud/data/tmpjbm4euy6) - w: [644] 545 bytes/chars
2026-01-13 22:25:02,161 - util.py[DEBUG]: Reading from /proc/uptime (quiet=False)
2026-01-13 22:25:02,162 - util.py[DEBUG]: Read 12 bytes from /proc/uptime
2026-01-13 22:25:02,162 - util.py[DEBUG]: cloud-init mode 'modules' took 0.111 seconds (0.11)
2026-01-13 22:25:02,162 - handlers.py[DEBUG]: finish: modules-config: SUCCESS: running modules for config
2026-01-13 22:25:02,550 - util.py[DEBUG]: Cloud-init v. 22.4.2 running 'modules:final' at Tue, 13 Jan 2026 22:25:02 +0000. Up 19.34 seconds.
2026-01-13 22:25:02,551 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,552 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,554 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,554 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,556 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,556 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,558 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,558 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,561 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,561 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,564 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,564 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,566 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,566 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,568 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,568 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,569 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,569 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,572 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,572 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,573 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,573 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,575 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,575 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,576 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,576 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,577 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,577 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,578 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,579 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,580 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,580 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,581 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,581 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,583 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,583 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,584 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,584 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,586 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,586 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,587 - util.py[DEBUG]: Reading from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json (quiet=False)
2026-01-13 22:25:02,587 - util.py[DEBUG]: Read 133834 bytes from /usr/lib/python3/dist-packages/cloudinit/config/schemas/schema-cloud-config-v1.json
2026-01-13 22:25:02,589 - stages.py[DEBUG]: Using distro class <class 'cloudinit.distros.debian.Distro'>
2026-01-13 22:25:02,591 - modules.py[INFO]: Skipping modules 'fan,landscape,lxd,puppet,chef,mcollective,salt-minion,phone-home,power-state-change' because no applicable config is provided.
2026-01-13 22:25:02,591 - modules.py[DEBUG]: Running module package-update-upgrade-install (<module 'cloudinit.config.cc_package_update_upgrade_install' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_package_update_upgrade_install.py'>) with frequency once-per-instance
2026-01-13 22:25:02,591 - handlers.py[DEBUG]: start: modules-final/config-package-update-upgrade-install: running config-package-update-upgrade-install with frequency once-per-instance
2026-01-13 22:25:02,591 - helpers.py[DEBUG]: config-package-update-upgrade-install already ran (freq=once-per-instance)
2026-01-13 22:25:02,591 - handlers.py[DEBUG]: finish: modules-final/config-package-update-upgrade-install: SUCCESS: config-package-update-upgrade-install previously ran
2026-01-13 22:25:02,591 - modules.py[DEBUG]: Running module write-files-deferred (<module 'cloudinit.config.cc_write_files_deferred' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_write_files_deferred.py'>) with frequency once-per-instance
2026-01-13 22:25:02,591 - handlers.py[DEBUG]: start: modules-final/config-write-files-deferred: running config-write-files-deferred with frequency once-per-instance
2026-01-13 22:25:02,591 - helpers.py[DEBUG]: config-write-files-deferred already ran (freq=once-per-instance)
2026-01-13 22:25:02,591 - handlers.py[DEBUG]: finish: modules-final/config-write-files-deferred: SUCCESS: config-write-files-deferred previously ran
2026-01-13 22:25:02,591 - modules.py[DEBUG]: Running module reset_rmc (<module 'cloudinit.config.cc_reset_rmc' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_reset_rmc.py'>) with frequency once-per-instance
2026-01-13 22:25:02,592 - handlers.py[DEBUG]: start: modules-final/config-reset_rmc: running config-reset_rmc with frequency once-per-instance
2026-01-13 22:25:02,592 - helpers.py[DEBUG]: config-reset_rmc already ran (freq=once-per-instance)
2026-01-13 22:25:02,592 - handlers.py[DEBUG]: finish: modules-final/config-reset_rmc: SUCCESS: config-reset_rmc previously ran
2026-01-13 22:25:02,592 - modules.py[DEBUG]: Running module refresh_rmc_and_interface (<module 'cloudinit.config.cc_refresh_rmc_and_interface' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_refresh_rmc_and_interface.py'>) with frequency always
2026-01-13 22:25:02,592 - handlers.py[DEBUG]: start: modules-final/config-refresh_rmc_and_interface: running config-refresh_rmc_and_interface with frequency always
2026-01-13 22:25:02,592 - helpers.py[DEBUG]: Running config-refresh_rmc_and_interface using lock (<cloudinit.helpers.DummyLock object at 0x7fbc05c9f3d0>)
2026-01-13 22:25:02,592 - cc_refresh_rmc_and_interface.py[DEBUG]: No 'rmcctrl' in path, disabled
2026-01-13 22:25:02,592 - handlers.py[DEBUG]: finish: modules-final/config-refresh_rmc_and_interface: SUCCESS: config-refresh_rmc_and_interface ran successfully
2026-01-13 22:25:02,592 - modules.py[DEBUG]: Running module rightscale_userdata (<module 'cloudinit.config.cc_rightscale_userdata' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_rightscale_userdata.py'>) with frequency once-per-instance
2026-01-13 22:25:02,592 - handlers.py[DEBUG]: start: modules-final/config-rightscale_userdata: running config-rightscale_userdata with frequency once-per-instance
2026-01-13 22:25:02,592 - helpers.py[DEBUG]: config-rightscale_userdata already ran (freq=once-per-instance)
2026-01-13 22:25:02,592 - handlers.py[DEBUG]: finish: modules-final/config-rightscale_userdata: SUCCESS: config-rightscale_userdata previously ran
2026-01-13 22:25:02,592 - modules.py[DEBUG]: Running module scripts-vendor (<module 'cloudinit.config.cc_scripts_vendor' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_vendor.py'>) with frequency once-per-instance
2026-01-13 22:25:02,593 - handlers.py[DEBUG]: start: modules-final/config-scripts-vendor: running config-scripts-vendor with frequency once-per-instance
2026-01-13 22:25:02,593 - helpers.py[DEBUG]: config-scripts-vendor already ran (freq=once-per-instance)
2026-01-13 22:25:02,593 - handlers.py[DEBUG]: finish: modules-final/config-scripts-vendor: SUCCESS: config-scripts-vendor previously ran
2026-01-13 22:25:02,593 - modules.py[DEBUG]: Running module scripts-per-once (<module 'cloudinit.config.cc_scripts_per_once' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_per_once.py'>) with frequency once
2026-01-13 22:25:02,593 - handlers.py[DEBUG]: start: modules-final/config-scripts-per-once: running config-scripts-per-once with frequency once
2026-01-13 22:25:02,593 - helpers.py[DEBUG]: config-scripts-per-once already ran (freq=once)
2026-01-13 22:25:02,593 - handlers.py[DEBUG]: finish: modules-final/config-scripts-per-once: SUCCESS: config-scripts-per-once previously ran
2026-01-13 22:25:02,593 - modules.py[DEBUG]: Running module scripts-per-boot (<module 'cloudinit.config.cc_scripts_per_boot' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_per_boot.py'>) with frequency always
2026-01-13 22:25:02,593 - handlers.py[DEBUG]: start: modules-final/config-scripts-per-boot: running config-scripts-per-boot with frequency always
2026-01-13 22:25:02,593 - helpers.py[DEBUG]: Running config-scripts-per-boot using lock (<cloudinit.helpers.DummyLock object at 0x7fbc05c9fed0>)
2026-01-13 22:25:02,594 - handlers.py[DEBUG]: finish: modules-final/config-scripts-per-boot: SUCCESS: config-scripts-per-boot ran successfully
2026-01-13 22:25:02,594 - modules.py[DEBUG]: Running module scripts-per-instance (<module 'cloudinit.config.cc_scripts_per_instance' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_per_instance.py'>) with frequency once-per-instance
2026-01-13 22:25:02,594 - handlers.py[DEBUG]: start: modules-final/config-scripts-per-instance: running config-scripts-per-instance with frequency once-per-instance
2026-01-13 22:25:02,594 - helpers.py[DEBUG]: config-scripts-per-instance already ran (freq=once-per-instance)
2026-01-13 22:25:02,594 - handlers.py[DEBUG]: finish: modules-final/config-scripts-per-instance: SUCCESS: config-scripts-per-instance previously ran
2026-01-13 22:25:02,594 - modules.py[DEBUG]: Running module scripts-user (<module 'cloudinit.config.cc_scripts_user' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_scripts_user.py'>) with frequency once-per-instance
2026-01-13 22:25:02,594 - handlers.py[DEBUG]: start: modules-final/config-scripts-user: running config-scripts-user with frequency once-per-instance
2026-01-13 22:25:02,594 - helpers.py[DEBUG]: config-scripts-user already ran (freq=once-per-instance)
2026-01-13 22:25:02,594 - handlers.py[DEBUG]: finish: modules-final/config-scripts-user: SUCCESS: config-scripts-user previously ran
2026-01-13 22:25:02,594 - modules.py[DEBUG]: Running module ssh-authkey-fingerprints (<module 'cloudinit.config.cc_ssh_authkey_fingerprints' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_ssh_authkey_fingerprints.py'>) with frequency once-per-instance
2026-01-13 22:25:02,594 - handlers.py[DEBUG]: start: modules-final/config-ssh-authkey-fingerprints: running config-ssh-authkey-fingerprints with frequency once-per-instance
2026-01-13 22:25:02,594 - helpers.py[DEBUG]: config-ssh-authkey-fingerprints already ran (freq=once-per-instance)
2026-01-13 22:25:02,594 - handlers.py[DEBUG]: finish: modules-final/config-ssh-authkey-fingerprints: SUCCESS: config-ssh-authkey-fingerprints previously ran
2026-01-13 22:25:02,594 - modules.py[DEBUG]: Running module keys-to-console (<module 'cloudinit.config.cc_keys_to_console' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_keys_to_console.py'>) with frequency once-per-instance
2026-01-13 22:25:02,594 - handlers.py[DEBUG]: start: modules-final/config-keys-to-console: running config-keys-to-console with frequency once-per-instance
2026-01-13 22:25:02,595 - helpers.py[DEBUG]: config-keys-to-console already ran (freq=once-per-instance)
2026-01-13 22:25:02,595 - handlers.py[DEBUG]: finish: modules-final/config-keys-to-console: SUCCESS: config-keys-to-console previously ran
2026-01-13 22:25:02,595 - modules.py[DEBUG]: Running module install-hotplug (<module 'cloudinit.config.cc_install_hotplug' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_install_hotplug.py'>) with frequency once-per-instance
2026-01-13 22:25:02,595 - handlers.py[DEBUG]: start: modules-final/config-install-hotplug: running config-install-hotplug with frequency once-per-instance
2026-01-13 22:25:02,595 - helpers.py[DEBUG]: config-install-hotplug already ran (freq=once-per-instance)
2026-01-13 22:25:02,595 - handlers.py[DEBUG]: finish: modules-final/config-install-hotplug: SUCCESS: config-install-hotplug previously ran
2026-01-13 22:25:02,595 - modules.py[DEBUG]: Running module final-message (<module 'cloudinit.config.cc_final_message' from '/usr/lib/python3/dist-packages/cloudinit/config/cc_final_message.py'>) with frequency always
2026-01-13 22:25:02,595 - handlers.py[DEBUG]: start: modules-final/config-final-message: running config-final-message with frequency always
2026-01-13 22:25:02,595 - helpers.py[DEBUG]: Running config-final-message using lock (<cloudinit.helpers.DummyLock object at 0x7fbc05df8bd0>)
2026-01-13 22:25:02,595 - util.py[DEBUG]: Reading from /proc/uptime (quiet=False)
2026-01-13 22:25:02,595 - util.py[DEBUG]: Read 12 bytes from /proc/uptime
2026-01-13 22:25:02,599 - util.py[DEBUG]: Cloud-init v. 22.4.2 finished at Tue, 13 Jan 2026 22:25:02 +0000. Datasource DataSourceNoCloud [seed=/dev/sr0][dsmode=net].  Up 19.41 seconds
2026-01-13 22:25:02,600 - util.py[DEBUG]: Writing to /var/lib/cloud/instance/boot-finished - wb: [644] 52 bytes
2026-01-13 22:25:02,600 - handlers.py[DEBUG]: finish: modules-final/config-final-message: SUCCESS: config-final-message ran successfully
2026-01-13 22:25:02,600 - main.py[DEBUG]: Ran 14 modules with 0 failures
2026-01-13 22:25:02,600 - atomic_helper.py[DEBUG]: Atomically writing to file /var/lib/cloud/data/status.json (via temporary file /var/lib/cloud/data/tmp0r7ta0cr) - w: [644] 573 bytes/chars
2026-01-13 22:25:02,601 - atomic_helper.py[DEBUG]: Atomically writing to file /var/lib/cloud/data/result.json (via temporary file /var/lib/cloud/data/tmptwbetqc3) - w: [644] 96 bytes/chars
2026-01-13 22:25:02,601 - util.py[DEBUG]: Creating symbolic link from '/run/cloud-init/result.json' => '../../var/lib/cloud/data/result.json'
2026-01-13 22:25:02,601 - util.py[DEBUG]: Reading from /proc/uptime (quiet=False)
2026-01-13 22:25:02,601 - util.py[DEBUG]: Read 12 bytes from /proc/uptime
2026-01-13 22:25:02,601 - util.py[DEBUG]: cloud-init mode 'modules' took 0.111 seconds (0.11)
2026-01-13 22:25:02,601 - handlers.py[DEBUG]: finish: modules-final: SUCCESS: running modules for final

./oldroot-backup/system-info.txt

Source root: /oldroot

OS release:

Network packages:

Network-related service links:

./run.log

Network diagnostic: 2026-10-20T01:06:56+00:00
Output: /sda1/setups/network-report-20261020-010656
Collecting new-debian13 from /sda1
Collecting old-debian12 from /oldsda1
Collecting oldroot-backup from /oldroot

./systemd-network-diff.txt